List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
3361 B.K.AUTO ENTERPRISES
F-61, SITE-V UDYOG KUNJ, PANKI, KANPUR U.P.
PIN1 : 208022
Phone No. : 9336231884
GSTIN : 09AGIPS6015M3ZT 		AGIPS6015M

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645 Description : BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645() Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) GUIDE SPRING RECOIL REAR for Rifle 5 56 Description : GUIDE SPRING RECOIL REAR for Rifle 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front Description : Rivet Flat Head for Housing Body Barrel Extension and Bracket Front() Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BAND RETAINER TO DS CAT NO 5340 015713 Description : BAND RETAINER TO DS CAT NO 5340 015713() Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION. C Estab
2) PIN LOCKING TRIGGER MECH-9MM Description : PIN LOCKING TRIGGER MECH-9MM() Specification : PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016 C Estab
3) CUP SPRING RETURN 5365-010528 Description : CUP SPRING RETURN 5365-010528() Specification : CUP SPRING RETURN(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007 OF CARBINE 9 MM 1A1IN FINISHED CONDITION ., C Estab
4) STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. Description : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION.() Specification : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. C Estab
5) COVER for MAG Description : COVER for MAG() Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
6) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 Description : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02() Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G) C Estab
7) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. Description : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.() Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. C Estab
8) BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. Description : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.() Specification : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. C Estab
9) WASHER BRAZING BUSH FOR MAG Description : WASHER BRAZING BUSH FOR MAG() Specification : S CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. C Estab
10) WASHER KEY PART NO 136 Description : WASHER KEY PART NO 136() Specification : DS CAT NO. 5310-002667 DC(I) NO. 27106-SA DT.21.06.17 IN FINISHED CONDITION. C Estab
11) Body Upper Feed Mechanism Slide 1005-006823 Description : Body Upper Feed Mechanism Slide 1005-006823() Specification : As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146 Description : Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Band Front Sight Drg .No. 5340-016724 Description : Band Front Sight Drg .No. 5340-016724() Specification : AS PER DRG. C Estab
2) BODY UPPER FEED MECH SLIDE DS CAT 1005-006823 Description : BODY UPPER FEED MECH SLIDE DS CAT 1005-006823() Specification : AS PER DRG R Estab
3) Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146 Description : Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146() Specification : AS PER DRG. C Estab
4) Adopter for Cleaning of Bore by pull Through Description : Adopter for Cleaning of Bore by pull Through() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
5) 17. WASHER Description : 17. WASHER() Specification : DS CAT NO. 5310-002664 C Estab
6) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
7) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
8) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
9) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
10) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
11) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
12) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56 Description : RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56() Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16 C Estab
13) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
14) BAND RETAINER TO DS CAT NO 5340 015713 Description : BAND RETAINER TO DS CAT NO 5340 015713() Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION. C Estab
15) LEVER PIN LOCKING IN FINISHED CONDITION Description : LEVER PIN LOCKING IN FINISHED CONDITION() Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293. C Estab
16) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
17) LEVER RIVETTING 5.56MM Description : LEVER RIVETTING 5.56MM() Specification : AS PER DRG. C Estab
18) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
19) EXTRACTOR FOR SMALL ARMS CARTRIDGES IN SOFT CONDITION Description : EXTRACTOR FOR SMALL ARMS CARTRIDGES IN SOFT CONDITION() Specification : AS PER DRG. C Estab
20) Band Front Sight To DS CAT NO. 5340-016724 Description : Band Front Sight To DS CAT NO. 5340-016724() Specification : AS PER DRG. C Estab
21) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024() Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 C Estab
22) PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175 Description : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175() Specification : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO.5315-009175.DC(I) NO.26927-SA DT.02.09.16 C Estab
23) Pin cocking handle stud DRG. No. 5315-001764 Description : Pin cocking handle stud DRG. No. 5315-001764() Specification : As per Drg. C Estab
24) PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION Description : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION() Specification : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISH COND. TO DS CAT NO. 5315-009261 DC(I) NO. 26934-SA DT. 07.09.16 C Estab
25) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
26) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 Description : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12() Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 C Estab
27) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
28) HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION Description : HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION() Specification : HOUSING LUG SLING TO DRG. NO. ARDE SK- 3145/80, DS CAT NO. 1005-008021 IN FINISHED CONDITION. DC(I) NO. 26949-SA ,DT. 27-09-16 C Estab
29) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
30) SPRING ITEMS FOR SMALL ARMS Description : SPRING ITEMS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
31) RIVET FLAT HEAD FOR DOVE TAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR DOVE TAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
32) Channel left for Carbine 5 point 56 Description : Channel left for Carbine 5 point 56() Specification : AS PER DRG. C Estab
33) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
34) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56 Description : PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56() Specification : PIN LOCK SEAR SAFETY TO DRG.NO- ARDE/SK-3143/44 DS CAT NO.5315-009215 DC(I)NO.26934-SA DT.07.09.16. C Estab
35) PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101 Description : PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101() Specification : PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101. C Estab
36) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
37) GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION Description : GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION() Specification : GUIDE SPRING RECOIL FRONT ARDE/SK- 2689/110. DS CAT NO-1005-007774.DC(1)26920-SA DT-26.08.16. (IN FINISHED CONDITION). C Estab
38) PIN GROOVED HD FOR TRIGGER SAFETY SEAR OF SMALL ARMS Description : PIN GROOVED HD FOR TRIGGER SAFETY SEAR OF SMALL ARMS() Specification : AS PER DRAWING C Estab
39) GUIDE PIECE Drg. No SK-2689-135 Description : GUIDE PIECE Drg. No SK-2689-135() Specification : AS PER DRG C Estab
40) COLLAR BARREL FOR SMALL ARMS Description : COLLAR BARREL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
41) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
42) PLATE BUTT ASSY FOR SMALL ARMS Description : PLATE BUTT ASSY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
43) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
44) MOUTH PIECE MAGAZINE FOR CARBINE 9 MM Description : MOUTH PIECE MAGAZINE FOR CARBINE 9 MM() Specification : AS PER DRAWING C Estab
45) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. Description : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.() Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. C Estab
46) PLATE GRIP ASSY. FOR CARBINE 9 MM Description : PLATE GRIP ASSY. FOR CARBINE 9 MM() Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHEDCONDITION COMPLETE OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT.09-06-04. C Estab
47) PIN LOCKING TRIGGER MECHANISM FOR SMALL ARMS Description : PIN LOCKING TRIGGER MECHANISM FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002 Description : GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002() Specification : GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002 C Estab
49) CATCH MAGAZINE FOR CARBINE 9 MM Description : CATCH MAGAZINE FOR CARBINE 9 MM() Specification : AS PER DRAWING C Estab
50) Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine Description : Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine() Specification : AS PER DRG.DS CAT No. 5305-005080 C Estab
51) EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 Description : EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1() Specification : EXTRACTOR TO DS CAT. NO.5120-007853 D C(I) NO-26339-SA DT.21-05-07 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. C Estab
52) BUTT ASSY FOR CARBINE 9MM Description : BUTT ASSY FOR CARBINE 9MM() Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1 C Estab
53) PIVOT BUTT DSCAT 1005-000879 Description : PIVOT BUTT DSCAT 1005-000879() Specification : AS PER DRG C Estab
54) CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM Description : CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : CENTRE PIN TO DS CAT NO. 5315-009119 DC(I) NO. 26372-SA DT. 16-08-07 IN FINISHED CONDITION C Estab
55) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
56) ALL TYPES OF PINS FOR SMALL ARMS Description : ALL TYPES OF PINS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
57) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Description : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001() Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 C Estab
58) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003() Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 C Estab
59) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
60) Cup spring return DS CAT No. 5365-010528 Description : Cup spring return DS CAT No. 5365-010528() Specification : AS PER DRG. C Estab
61) PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIECE FILLER DRG NO AKC 03/8 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
62) PIN CATCH TRIGGER PH-7-3 Description : PIN CATCH TRIGGER PH-7-3() Specification : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION.D.A. NO. 36/08 DT. 13-05-2008 C Estab
63) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
64) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Description : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
65) STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. Description : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION.() Specification : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. C Estab
66) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
67) COVER for MAG Description : COVER for MAG() Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
68) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. Description : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.() Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. C Estab
69) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG Description : PIVOT COVER SLIDE GUIDE ROLLER FOR MAG() Specification : DS CAT NO. 1005-000460 DC(NO.) 25298-SA DT-19.3.2002 IN FINISHED CONDITION. C Estab
70) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 Description : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02() Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G) C Estab
71) PIVOT COVER LATCHES SPRING FOR MAG Description : PIVOT COVER LATCHES SPRING FOR MAG() Specification : PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G) C Estab
72) BODY LOWER FEED MECH SLIDE DS CAT 1005-000475 Description : BODY LOWER FEED MECH SLIDE DS CAT 1005-000475() Specification : AS PER DRG C Estab
73) FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. Description : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION.() Specification : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. (MATERIAL WILL BE SUPPLIED BY S.A.F ON FREIGHT TO PAY AGAINST B/G. C Estab
74) RIVET LOCKING SHOULDER FOR MAG Description : RIVET LOCKING SHOULDER FOR MAG() Specification : DRG NO. SKM 876G FOR LOCKING SHOULDER C Estab
75) BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. Description : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.() Specification : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. C Estab
76) PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION. Description : PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION.() Specification : PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION. C Estab
77) SPLIT PIN HOLLOW HALF LINK FOR MAG Description : SPLIT PIN HOLLOW HALF LINK FOR MAG() Specification : DS CAT NO. 5315-001523 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION C Estab
78) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG Description : PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG() Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION. C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
81) PIN LOCATING FLANGE TRIGGER FOR MAG Description : PIN LOCATING FLANGE TRIGGER FOR MAG() Specification : DS CAT NO. 5315-001542 DC(I) NO. 27013-SA DT-14.1.17 IN FINISHED CONDITION. C Estab
82) WASHER BRAZING BUSH FOR MAG Description : WASHER BRAZING BUSH FOR MAG() Specification : S CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. C Estab
83) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
84) WASHER KEY PART NO 136 Description : WASHER KEY PART NO 136() Specification : DS CAT NO. 5310-002667 DC(I) NO. 27106-SA DT.21.06.17 IN FINISHED CONDITION. C Estab
85) LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION. Description : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.() Specification : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Band Front Sight Drg .No. 5340-016724 Description : Band Front Sight Drg .No. 5340-016724() Specification : AS PER DRG. C Estab
2) BODY UPPER FEED MECH SLIDE DS CAT 1005-006823 Description : BODY UPPER FEED MECH SLIDE DS CAT 1005-006823() Specification : AS PER DRG R Estab
3) Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146 Description : Box Magzine for LMG 5.56 MM Drg No. CQA/SA 146() Specification : AS PER DRG. C Estab
4) Adopter for Cleaning of Bore by pull Through Description : Adopter for Cleaning of Bore by pull Through() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
5) 17. WASHER Description : 17. WASHER() Specification : DS CAT NO. 5310-002664 C Estab
6) RIVET SOLID FOR MAG Description : RIVET SOLID FOR MAG() Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000 C Estab
7) RIVET FOR SMALL ARMS Description : RIVET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
8) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
9) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
10) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM() Specification : ARDE SK 3143/51 C Estab
11) RIVET SOLID HINGE COVER FOR INSAS 5.56 MM Description : RIVET SOLID HINGE COVER FOR INSAS 5.56 MM() Specification : ARDE SK 3143/53 C Estab
12) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56 Description : RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56() Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16 C Estab
13) LOOP SLING FRONT FOR SMALL ARMS Description : LOOP SLING FRONT FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
14) BAND RETAINER TO DS CAT NO 5340 015713 Description : BAND RETAINER TO DS CAT NO 5340 015713() Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION. C Estab
15) LEVER PIN LOCKING IN FINISHED CONDITION Description : LEVER PIN LOCKING IN FINISHED CONDITION() Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293. C Estab
16) SIGHT SMALL ARMS Description : SIGHT SMALL ARMS() Specification : AS PER DRAWING C Estab
17) LEVER RIVETTING 5.56MM Description : LEVER RIVETTING 5.56MM() Specification : AS PER DRG. C Estab
18) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56 Description : RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56() Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH C Estab
19) EXTRACTOR FOR SMALL ARMS CARTRIDGES IN SOFT CONDITION Description : EXTRACTOR FOR SMALL ARMS CARTRIDGES IN SOFT CONDITION() Specification : AS PER DRG. C Estab
20) Band Front Sight To DS CAT NO. 5340-016724 Description : Band Front Sight To DS CAT NO. 5340-016724() Specification : AS PER DRG. C Estab
21) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024() Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024 C Estab
22) PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175 Description : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175() Specification : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO.5315-009175.DC(I) NO.26927-SA DT.02.09.16 C Estab
23) Pin cocking handle stud DRG. No. 5315-001764 Description : Pin cocking handle stud DRG. No. 5315-001764() Specification : As per Drg. C Estab
24) PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION Description : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISHED CONDITION() Specification : PIN STRAIGHT HEADLESS FIXING BRACKET IN FINISH COND. TO DS CAT NO. 5315-009261 DC(I) NO. 26934-SA DT. 07.09.16 C Estab
25) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
26) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 Description : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12() Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12 C Estab
27) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition Description : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition() Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition C Estab
28) HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION Description : HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION() Specification : HOUSING LUG SLING TO DRG. NO. ARDE SK- 3145/80, DS CAT NO. 1005-008021 IN FINISHED CONDITION. DC(I) NO. 26949-SA ,DT. 27-09-16 C Estab
29) LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 Description : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16() Specification : LINK SLING.TO DRAWING NO-ARDE/SK-3145/93,DS CAT NO.1005-1185 70(IN FNISHED CONDITION) DC NO. 26949-SA, DT. 27.09.16 C Estab
30) SPRING ITEMS FOR SMALL ARMS Description : SPRING ITEMS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
31) RIVET FLAT HEAD FOR DOVE TAIL FOR SMALL ARMS Description : RIVET FLAT HEAD FOR DOVE TAIL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
32) Channel left for Carbine 5 point 56 Description : Channel left for Carbine 5 point 56() Specification : AS PER DRG. C Estab
33) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
34) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56 Description : PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56() Specification : PIN LOCK SEAR SAFETY TO DRG.NO- ARDE/SK-3143/44 DS CAT NO.5315-009215 DC(I)NO.26934-SA DT.07.09.16. C Estab
35) PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101 Description : PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101() Specification : PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101. C Estab
36) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
37) GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION Description : GUIDE SPRING RECOIL FRONT IN FINISHED CONDITION() Specification : GUIDE SPRING RECOIL FRONT ARDE/SK- 2689/110. DS CAT NO-1005-007774.DC(1)26920-SA DT-26.08.16. (IN FINISHED CONDITION). C Estab
38) PIN GROOVED HD FOR TRIGGER SAFETY SEAR OF SMALL ARMS Description : PIN GROOVED HD FOR TRIGGER SAFETY SEAR OF SMALL ARMS() Specification : AS PER DRAWING C Estab
39) GUIDE PIECE Drg. No SK-2689-135 Description : GUIDE PIECE Drg. No SK-2689-135() Specification : AS PER DRG C Estab
40) COLLAR BARREL FOR SMALL ARMS Description : COLLAR BARREL FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
41) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
42) PLATE BUTT ASSY FOR SMALL ARMS Description : PLATE BUTT ASSY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
43) BRACKET FOR SMALL ARMS Description : BRACKET FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
44) MOUTH PIECE MAGAZINE FOR CARBINE 9 MM Description : MOUTH PIECE MAGAZINE FOR CARBINE 9 MM() Specification : AS PER DRAWING C Estab
45) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. Description : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.() Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. C Estab
46) PLATE GRIP ASSY. FOR CARBINE 9 MM Description : PLATE GRIP ASSY. FOR CARBINE 9 MM() Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHEDCONDITION COMPLETE OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT.09-06-04. C Estab
47) PIN LOCKING TRIGGER MECHANISM FOR SMALL ARMS Description : PIN LOCKING TRIGGER MECHANISM FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
48) GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002 Description : GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002() Specification : GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002 C Estab
49) CATCH MAGAZINE FOR CARBINE 9 MM Description : CATCH MAGAZINE FOR CARBINE 9 MM() Specification : AS PER DRAWING C Estab
50) Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine Description : Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine() Specification : AS PER DRG.DS CAT No. 5305-005080 C Estab
51) EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 Description : EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1() Specification : EXTRACTOR TO DS CAT. NO.5120-007853 D C(I) NO-26339-SA DT.21-05-07 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. C Estab
52) BUTT ASSY FOR CARBINE 9MM Description : BUTT ASSY FOR CARBINE 9MM() Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1 C Estab
53) PIVOT BUTT DSCAT 1005-000879 Description : PIVOT BUTT DSCAT 1005-000879() Specification : AS PER DRG C Estab
54) CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM Description : CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : CENTRE PIN TO DS CAT NO. 5315-009119 DC(I) NO. 26372-SA DT. 16-08-07 IN FINISHED CONDITION C Estab
55) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
56) ALL TYPES OF PINS FOR SMALL ARMS Description : ALL TYPES OF PINS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
57) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Description : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001() Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 C Estab
58) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003() Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 C Estab
59) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 C Estab
60) Cup spring return DS CAT No. 5365-010528 Description : Cup spring return DS CAT No. 5365-010528() Specification : AS PER DRG. C Estab
61) PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIECE FILLER DRG NO AKC 03/8 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
62) PIN CATCH TRIGGER PH-7-3 Description : PIN CATCH TRIGGER PH-7-3() Specification : PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION.D.A. NO. 36/08 DT. 13-05-2008 C Estab
63) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
64) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Description : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
65) STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. Description : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION.() Specification : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. C Estab
66) PLUNGER FOR SMALL ARMS Description : PLUNGER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
67) COVER for MAG Description : COVER for MAG() Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
68) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. Description : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.() Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING. C Estab
69) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG Description : PIVOT COVER SLIDE GUIDE ROLLER FOR MAG() Specification : DS CAT NO. 1005-000460 DC(NO.) 25298-SA DT-19.3.2002 IN FINISHED CONDITION. C Estab
70) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 Description : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02() Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G) C Estab
71) PIVOT COVER LATCHES SPRING FOR MAG Description : PIVOT COVER LATCHES SPRING FOR MAG() Specification : PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G) C Estab
72) BODY LOWER FEED MECH SLIDE DS CAT 1005-000475 Description : BODY LOWER FEED MECH SLIDE DS CAT 1005-000475() Specification : AS PER DRG C Estab
73) FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. Description : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION.() Specification : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. (MATERIAL WILL BE SUPPLIED BY S.A.F ON FREIGHT TO PAY AGAINST B/G. C Estab
74) RIVET LOCKING SHOULDER FOR MAG Description : RIVET LOCKING SHOULDER FOR MAG() Specification : DRG NO. SKM 876G FOR LOCKING SHOULDER C Estab
75) BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. Description : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.() Specification : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. C Estab
76) PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION. Description : PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION.() Specification : PIN BARREL LOCKING TO DS CAT NO. 5315-001519 DC(I) NO. 25359-SA DT-10.05.02 IN FINISHED CONDITION. C Estab
77) SPLIT PIN HOLLOW HALF LINK FOR MAG Description : SPLIT PIN HOLLOW HALF LINK FOR MAG() Specification : DS CAT NO. 5315-001523 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION C Estab
78) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG Description : PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG() Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION. C Estab
79) STOP PIN EJECTOR FOR MAG Description : STOP PIN EJECTOR FOR MAG() Specification : DS CAT NO. 5315-001527 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
80) PIN STRAIGHT HEADLESS FOR MAG Description : PIN STRAIGHT HEADLESS FOR MAG() Specification : PIN STRAIGHT HEADLESS TO DS CAT.5315-001552 DC (I) NO.20439-SA DT.17.6.89 IN FINISHED CONDITION. C Estab
81) PIN LOCATING FLANGE TRIGGER FOR MAG Description : PIN LOCATING FLANGE TRIGGER FOR MAG() Specification : DS CAT NO. 5315-001542 DC(I) NO. 27013-SA DT-14.1.17 IN FINISHED CONDITION. C Estab
82) WASHER BRAZING BUSH FOR MAG Description : WASHER BRAZING BUSH FOR MAG() Specification : S CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. C Estab
83) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
84) WASHER KEY PART NO 136 Description : WASHER KEY PART NO 136() Specification : DS CAT NO. 5310-002667 DC(I) NO. 27106-SA DT.21.06.17 IN FINISHED CONDITION. C Estab
85) LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION. Description : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.() Specification : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN TRIGGER & SAFETY SEAR FOR SMALL ARMS Description : PIN TRIGGER & SAFETY SEAR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR INSAS 5.56 MM Description : PIN GROOVED HEADED FOR TRIGGER AND SAFETY SEAR FOR INSAS 5.56 MM() Specification : ARDE SK 2689/132 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
3362 KUMAR ENTERPRISES
LATOUCHE ROAD LATOUCHE ROAD KANPUR U.P.
PIN1 : 208001
Phone No. : 9839014141
GSTIN : 09AABFV1362R1ZM 		KNPV01266G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Round DIA 18MM Description : Steel Round DIA 18MM() Specification : Steel Round DIA 18MM to Specn IS:5517-1993 Grade 40NI 6CR 4 M03 (EN-24) R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Round DIA 18MM Description : Steel Round DIA 18MM() Specification : Steel Round DIA 18MM to Specn IS:5517-1993 Grade 40NI 6CR 4 M03 (EN-24) R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST ROUND 25 MM DIA GD 708 M40 Description : ST ROUND 25 MM DIA GD 708 M40() Specification : STEEL ROUND 25 MM DIA.TO SPECN.IS 5517-1993 GD.42 CR4 MO2 LRS-63MM. IN HOT ROLLED AND ANNEALED CONDITION. TEST PIECE TO BE HEAT TREATED TO "T" CONDITION & MECHANICAL PROPERTIES TO BE CHECKED.(REQD.FOR CYLINDER GAS) R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL ROUND Description : STEEL ROUND() Specification : STEEL ROUND 18.00 MM TO SPECN. BS:970PT.1:1983 GD.655 M13 (EN 36B).(FOR STUD CHANGE LEVER). R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SM SHEET CR Description : SM SHEET CR() Specification : SM SHEET CR 1.25X1250X2500MM BS:1449:PT.1:1983 CR-3 SEC.2 OR IS:513:1994 REQD.FOR STOP D S CAT NO 1005-000975 9MM MAGZINE CARBINE 1A1/CARBURIZING BOX. R Estab
Category : s
Grade : 3
Size : S
1) Field Gun Factory Kanpur
Name Specification Use Status
1) PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993[07]() Specification : PHOSPHOR BRONZE SIZE 45MM SQUARE X1350 IN MULTIPLE LENGTH SPECN IS 7811 OF 1993 R Estab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION[07]() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL FLAT 25X32MM Description : STEEL FLAT 25X32MM() Specification : STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM) R Estab
2) DIA 6MM SS WIRE ROD IS6528 1972 GR 04 CR 18 NI 10 FULLY SOFTENED FOR FIRING DEVICE Description : DIA 6MM SS WIRE ROD IS6528 1972 GR 04 CR 18 NI 10 FULLY SOFTENED FOR FIRING DEVICE() Specification : DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED R Estab
3) STEEL ROUND 18MM DIA FOR MAG Description : STEEL ROUND 18MM DIA FOR MAG() Specification : SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 R Estab
4) STEEL ROUND dia for JVPC Description : STEEL ROUND dia for JVPC() Specification : SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24) R Estab
5) ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 Description : ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36() Specification : SPECIFICATION BS:970.PT.1 1983 GD.605M36 R Estab
6) STEEL FLAT 17X47 MM FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907 Description : STEEL FLAT 17X47 MM FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907() Specification : SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED R Estab
7) STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION Description : STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION() Specification : SPECN.BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTEDAS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST &MICROSCOPIC NON-METALIC INCLUSION RATING AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265 R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Strip Description : Steel Strip() Specification : Steel Strip Size :- 1,8MM THICK X270 MM WIDE X1600 MM LONG TO SPECN. IS:7226-1974 GRADE C-40. COLD ROLLED & ANNEALED CONDN. Note: GRAIN DIRECTION SHOULD BE ALONG THE LENGTH R Estab
2) STEEL RD 19.00MMDIAINHOT ROLLED & NORMALISED CONDITION TO SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE Description : STEEL RD 19.00MMDIAINHOT ROLLED & NORMALISED CONDITION TO SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE() Specification : SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE R Estab
3) STEEL ROUND 20MM DIA Description : STEEL ROUND 20MM DIA() Specification : STEEL ROUND 20MM DIA TO SPECN.BS:970:PT.1:1983 GD.080M40 IN HOT ROLLED &NORMALISED CONDITION. TEST PIECE TO BE TESTED AS PER THE SPECIFICATION. R Estab
4) ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 CB . (FOR BRACKET FRONT HAND GUARD). Description : ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 CB . (FOR BRACKET FRONT HAND GUARD).() Specification : SPECN.IS:5517-1993 DEGIGNATION 40 CB R Estab
5) STEEL FLAT 25X32MM Description : STEEL FLAT 25X32MM() Specification : STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM) R Estab
6) STEEL RD 25MM DIA FOR MAG Description : STEEL RD 25MM DIA FOR MAG() Specification : SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614) R Estab
7) STEEL ROUND 27 MM Description : STEEL ROUND 27 MM() Specification : STEEL ROUND 27 MM TO SPECN.IS:5517-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD). R Estab
8) STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER ) Description : STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER )() Specification : SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' R Estab
9) DIA 6MM SS WIRE ROD IS6528 1972 GR 04 CR 18 NI 10 FULLY SOFTENED FOR FIRING DEVICE Description : DIA 6MM SS WIRE ROD IS6528 1972 GR 04 CR 18 NI 10 FULLY SOFTENED FOR FIRING DEVICE() Specification : DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED R Estab
10) ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 Description : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993() Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE SS +/-0.25MM. R Estab
11) STEEL ROUND 18MM DIA FOR MAG Description : STEEL ROUND 18MM DIA FOR MAG() Specification : SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 R Estab
12) STEEL STRIP 3.5MM THICK X 32MM WIDE TO SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION Description : STEEL STRIP 3.5MM THICK X 32MM WIDE TO SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION() Specification : SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION R Estab
13) ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 Description : ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36() Specification : SPECIFICATION BS:970.PT.1 1983 GD.605M36 R Estab
14) STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614) Description : STEEL RD 25 MM DIA ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)() Specification : SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29 R Estab
15) STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40. Description : STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.() Specification : SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40. R Estab
16) STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION Description : STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION() Specification : SPECN.BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTEDAS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST &MICROSCOPIC NON-METALIC INCLUSION RATING AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265 R Estab
17) STEEL FLAT 17X47 MM FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907 Description : STEEL FLAT 17X47 MM FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907() Specification : SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED R Estab
18) St Rd 3 point 25mm dia for JVPC Description : St Rd 3 point 25mm dia for JVPC() Specification : St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block) R Estab
19) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION R Estab
20) Steel flat 36mm x 62mm for JVPC Description : Steel flat 36mm x 62mm for JVPC() Specification : BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B R Estab
21) LEADED PHOS BRONZE ROD 32MM DIA Description : LEADED PHOS BRONZE ROD 32MM DIA() Specification : LEADED PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) DIA 64MM+/-0.5MM STEEL ROD Description : DIA 64MM+/-0.5MM STEEL ROD() Specification : DIA 64MM+/-0.5MM STEEL ROD TO SPECIFICATION IS:7283 1992 WITH MATERIAL TO CHEMICAL & MECHANICAL PROPERTY REQUIRMENTS OF IS:226 1975 FE 410-5 OR BS 970 PT1 :1991 GRADE 070 M 20 NORMALISED R Estab
Category : s
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) ST FLAT 70X34MM IN HOT ROLLED and ANNEALED CONDITION[01]() Specification : ST.FLAT 70X34MM IN HOT ROLLED & ANNEALED CONDITION TO SPECN. BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTED AS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST & MICROSCOPIC NON-METALIC INCLUSION RATING(II) AS PER NAT R Nonestab
2) STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C[03]() Specification : STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650'C TO SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C. (REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907) R Nonestab
3) STEEL FL 50X25MM[04]() Specification : STEEL FL.50X25MM TO IS:5517-1993 GD-40 NI6CR4MO3. R Nonestab
4) STEEL FLAT 36 MM X 62 MM[04]() Specification : STEEL FLAT 36 MM X 62 MM BS: 970 PT-1 1983 GD. 835 M 15 OR EN- 39-B R Nonestab
5) STEEL FLAT SIZE 6 X 22 MM IN HOT ROLLED AND NORMALISED CONDN FOR MAG[01]() Specification : STEEL FLAT SIZE:- 6 X 22MM IN HOT ROLLED & NORMALISED CONDN.TO SPECIFICATION BS:970:PT.3:1991:GR.070M55 MATERIAL TO BE TESTED IN HARDENED & TEMPERED CONDITION AS PER RULING SECTION & SEPERATE TEST PIECE NEED TO BE HEAT TREATED TO ACHIEVE R Nonestab
6) STEEL FLAT 45X50 070M55 OR EN9 FOR MAG[01]() Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION R Nonestab
7) PHOS BRONZE ROD 32MM DIA FOR MAG[07]() Specification : PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M R Nonestab
8) ST ROD 42MM DIA[04]() Specification : ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.O R Nonestab
9) STEEL ROD 30MM DIA[01]() Specification : Steel Rod 30mm dia. To Specn. IS:5517:1993 Designation 55CB. R Nonestab
10) STEEL ROUND DIA 25MM[01]() Specification : STEEL ROUND DIA 25MM TO AS PER SPEC. IS:4431-1978 DESIGNATION 11C10S25 R Nonestab
11) STEEL FLAT SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION[01]() Specification : STEEL FLAT TO SPECIFICATION IS:5517-1993 DESIGNATION 55C8 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION R Nonestab
12) ST RD 6 point 35MM[01]() Specification : ST. RD. 6.35MM DIA TO SPECN. IS 5517-1993, GD 30C8 R Nonestab
13) STEEL SQUARE 22MM HOT ROLLED AND NORMALISED CONDITION TO SPECN BS 970 PT3 1991 GD070M55[01]() Specification : STEEL SQR. 22MM (7/8”) HOT ROLLED & NORMALISED CONDITION TO SPECN :BS:970 :PT-3 :1991 GD.070M55 R Nonestab
14) Steel Flat 75x40mm[01]() Specification : ST. FLAT 75(+/-5.0)MM X 40(+/-2.0)MM TO SPECN IS:6603-2001, DESIGNATION X12CR12 OR X20CR13. MACRO ETCH TEST & NMIR TEST (FOR MODERATELY/NON-STRESSED(II)) AS PER ANX. ‘A’ NATURE ‘C’ R Nonestab
15) STEEL RD 25MM DIA[03]() Specification : STEEL RD 25MM DIA SPECN.IS:6603-2001,DESIG-X15CR16 NI2 HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST(II) TO BE CARRIED OUT AS PER ANNEXURE NATURE `C' (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614) R Nonestab
16) STEEL ROUND 18MM DIA[01]() Specification : STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36 MACRO ETCH AND NMIR TEST (MODERATELY STRESSED/NON STRESSED COMPONENTS)AS PER ANNEXURE "A" NATURE-C R Nonestab
Category :
Grade : Grade III
Size : S
3363 ANAND ENGINEERING CORPORATION
101, UPTRON ESTATE PANKI INDUSTRIAL AREA KANPUR U.P.
PIN1 : 208022
Phone No. : 0512-2691529 		KNPA02022G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm Description : HOUSING REAR SIGHT NO ARDE SK 3143 83 for LMG 5 56 mm() Specification : HOUSING REAR SIGHT TO DRG.NO.ARDE SK 3143/83 DS CAT NO.1005-008012 DC NO.26516-SA DT-26.06.10 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Sear for LMG Description : Sear for LMG() Specification : SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26924-SA DT-30.08.16 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN REAR MOUNTING for MAG Description : PIN REAR MOUNTING for MAG() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LEVER LOCKING GAS CYLINDER FOR JVPC Description : PIN LEVER LOCKING GAS CYLINDER FOR JVPC() Specification : PIN LEVER LOCKING GAS CYLINDER FOR JVPC DRG NO. 0204-03-04-01-13-002-00DA C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Blank for Body Cover Drg. No. 23055A SKM-902*1 Description : Blank for Body Cover Drg. No. 23055A SKM-902*1() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1, C Estab
2) LEVER PIN LOCKING FOR INSAS 5.56MM Description : LEVER PIN LOCKING FOR INSAS 5.56MM() Specification : CQA(SA)SK-588/1 C Estab
3) LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 Description : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899() Specification : LEAFSIGHT DRG ARDE SK-2825/31. IN FINISHED CONDITION. DC(1)NO-26956-SA DT-07/10/2016 DS CAT NO.1005-007899 C Estab
4) MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 Description : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000() Specification : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 C Estab
5) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm Description : Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm() Specification : AS PER DRG.no. 1005-000977 C Estab
6) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Description : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001() Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 C Estab
7) PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. Description : PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003.() Specification : PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. C Estab
8) HANDLE COCKING SLIDE DS CAT 1005-006630 Description : HANDLE COCKING SLIDE DS CAT 1005-006630() Specification : AS PER DRG C Estab
9) Sear Tripper for MAG 7.62 mm DS CAT 1005-000620 Description : Sear Tripper for MAG 7.62 mm DS CAT 1005-000620() Specification : As Per Drg. C Estab
10) SPINDLE REGULATOR FOR MAG Description : SPINDLE REGULATOR FOR MAG() Specification : SPINDLE REGULATOR TO DS CAT NO. 1005-007081 DC(I) NO. 26670-SA DT- 17.4.13 IN FINISHED CONDITION. C Estab
11) BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94 Description : BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94() Specification : BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) Blank for Body Cover Drg. No. 23055A SKM-902*1 Description : Blank for Body Cover Drg. No. 23055A SKM-902*1() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1, C Estab
3) Trigger CQA (SA) SK 454/1/1 R5 Description : Trigger CQA (SA) SK 454/1/1 R5() Specification : AS PER DRG. C Estab
4) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
5) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
6) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
7) CYLINDER GAS GUN FOR SMALL ARMS Description : CYLINDER GAS GUN FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
8) HOUSING REAR SIGHT FOR CARBINE 5 56MM Description : HOUSING REAR SIGHT FOR CARBINE 5 56MM() Specification : HOUSING REAR SIGHT IC TO DRG NO. AKC-08/1/1 I.C.* FOR CARBINE 5.56MM. C Estab
9) HINGE COVER FOR INSAS 5.56MM Description : HINGE COVER FOR INSAS 5.56MM() Specification : ARDE/SK-3143/18 C Estab
10) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
11) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
12) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
13) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010 C Estab
14) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
15) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
16) LOCK RETAINER IN FINISHED CONDITION Description : LOCK RETAINER IN FINISHED CONDITION() Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10. C Estab
17) EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 Description : EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1() Specification : EXTRACTOR TO DS CAT. NO.5120-007853 D C(I) NO-26339-SA DT.21-05-07 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. C Estab
18) PLATEFORM ASSEMBLY FOR CARBINE 9MM Description : PLATEFORM ASSEMBLY FOR CARBINE 9MM() Specification : PLATEFORM ASSEMBLY OF 9MM MAGAZINE IN FINISHED CONDITION DS CAT NO 1005-000978 DC(1) 25694-SA DT 08-03-2003 (COMPONENT ARE (1)ROLLER (2) PIN (3)GUIDE SPRING (4) PLATE- -FORM (5)PLATEFORM EXTENSION C Estab
19) Pin Firing PHMK-II-1-29 Description : Pin Firing PHMK-II-1-29() Specification : As Per Drg. C Estab
20) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD() Specification : AS PER DRG. C Estab
21) SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23 Description : SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23() Specification : SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23 C Estab
22) CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08 Description : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08() Specification : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08 C Estab
23) NUT LOCKING BARREL for MAG Description : NUT LOCKING BARREL for MAG() Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02 C Estab
24) HANDLE COCKING SLIDE DS CAT NO. 1005-006630 Description : HANDLE COCKING SLIDE DS CAT NO. 1005-006630() Specification : AS PER DRG C Estab
25) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. Description : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.() Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. C Estab
26) Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358 Description : Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358() Specification : AS PER DRG. C Estab
27) SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. Description : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION.() Specification : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM Description : STEEL BLANK OF SIGHT REAR FOR INSAS 5.56MM() Specification : SK-4771 C Estab
2) Blank for Body Cover Drg. No. 23055A SKM-902*1 Description : Blank for Body Cover Drg. No. 23055A SKM-902*1() Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902*1, C Estab
3) Trigger CQA (SA) SK 454/1/1 R5 Description : Trigger CQA (SA) SK 454/1/1 R5() Specification : AS PER DRG. C Estab
4) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
5) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
6) PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS Description : PIN ECCENTRIC LEVER LOCKING FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
7) CYLINDER GAS GUN FOR SMALL ARMS Description : CYLINDER GAS GUN FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
8) HOUSING REAR SIGHT FOR CARBINE 5 56MM Description : HOUSING REAR SIGHT FOR CARBINE 5 56MM() Specification : HOUSING REAR SIGHT IC TO DRG NO. AKC-08/1/1 I.C.* FOR CARBINE 5.56MM. C Estab
9) HINGE COVER FOR INSAS 5.56MM Description : HINGE COVER FOR INSAS 5.56MM() Specification : ARDE/SK-3143/18 C Estab
10) Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567 Description : Nut Plain Round Lock for Sight in F/D cond. To DSCAT No. 5310-022567() Specification : AS PER DRG. C Estab
11) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
12) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
13) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010 C Estab
14) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
15) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
16) LOCK RETAINER IN FINISHED CONDITION Description : LOCK RETAINER IN FINISHED CONDITION() Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10. C Estab
17) EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 Description : EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1() Specification : EXTRACTOR TO DS CAT. NO.5120-007853 D C(I) NO-26339-SA DT.21-05-07 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. C Estab
18) PLATEFORM ASSEMBLY FOR CARBINE 9MM Description : PLATEFORM ASSEMBLY FOR CARBINE 9MM() Specification : PLATEFORM ASSEMBLY OF 9MM MAGAZINE IN FINISHED CONDITION DS CAT NO 1005-000978 DC(1) 25694-SA DT 08-03-2003 (COMPONENT ARE (1)ROLLER (2) PIN (3)GUIDE SPRING (4) PLATE- -FORM (5)PLATEFORM EXTENSION C Estab
19) Pin Firing PHMK-II-1-29 Description : Pin Firing PHMK-II-1-29() Specification : As Per Drg. C Estab
20) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD() Specification : AS PER DRG. C Estab
21) SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23 Description : SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23() Specification : SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23 C Estab
22) CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08 Description : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08() Specification : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08 C Estab
23) NUT LOCKING BARREL for MAG Description : NUT LOCKING BARREL for MAG() Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02 C Estab
24) HANDLE COCKING SLIDE DS CAT NO. 1005-006630 Description : HANDLE COCKING SLIDE DS CAT NO. 1005-006630() Specification : AS PER DRG C Estab
25) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. Description : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.() Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION. C Estab
26) Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358 Description : Rod cleaning 7.62 mm Barrel gas cylinder 1A DS CAT No. 1005-000358() Specification : AS PER DRG. C Estab
27) SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. Description : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION.() Specification : SLEEVE BARREL TO SKM - 913 DC(I) NO. 25325-SA DT- 10/04/2002 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
3364 ESSAR INTERNATIONAL,
C-29 UDYOG KUNJ, SITE NIO. 5, ROAD NO. 8 DADA NAGAR KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-2231663 		KNPP01616G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET SNAP HEAD DRG NO SK 3220 Description : RIVET SNAP HEAD DRG NO SK 3220() Specification : RIVET SNAP HEAD TO DRG. NO.SK-3220* PHOSPHATED TO SPECN.JSS-0465-01-1988 CLASS II OIL FINISH C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Sear for LMG Description : Sear for LMG() Specification : SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26924-SA DT-30.08.16 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645 Description : BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645() Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15 C Estab
2) PAWL HAMMER FOR RIFLE 5 56 Description : PAWL HAMMER FOR RIFLE 5 56() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Estab
3) BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99. Description : BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.() Specification : BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99. C Estab
4) EXTRACTOR FOR SMALL ARMS Description : EXTRACTOR FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
5) HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. Description : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.() Specification : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION. C Estab
6) CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM Description : CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : CENTRE PIN TO DS CAT NO. 5315-009119 DC(I) NO. 26372-SA DT. 16-08-07 IN FINISHED CONDITION R Estab
7) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm Description : Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm() Specification : AS PER DRG.no. 1005-000977 R Estab
8) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM() Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 R Estab
9) GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002 Description : GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002() Specification : GUIDE SPRING FOR MAGAZINE 9 MM DS CAT NO.1005-000979 DC(1) NO.25255-SA DATED 30-01-2002 R Estab
10) 7. PIN RETAINING GAS CYLINDER Description : 7. PIN RETAINING GAS CYLINDER() Specification : DS CAT NO. 5315-001518 R Estab
11) PIN LOCATING SEAR SPRING for MAG Description : PIN LOCATING SEAR SPRING for MAG() Specification : PIN LOCATING SEAR SPRING TO DS CAT NO. 5315-001541 DC(I) NO. 27013-SA DT- 14.01.17 IN FINISHED CONDITION. R Estab
12) RIVET CARTRIDGE STOP for MAG Description : RIVET CARTRIDGE STOP for MAG() Specification : DS CAT NO. 5320-002188 DC(I) NO. 27016-SA DT- 19.01.17 IN FINISHED CONDITION. R Estab
13) SIGHT REAR FOR MAG Description : SIGHT REAR FOR MAG() Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION. R Estab
14) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. Description : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.() Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE. R Estab
Category : p
Grade : 3
Size : S
3365 SRI BALAJI CASTINGS PVT LTD
26B/14, NORTH PHASE SIDCO INDUSTRIAL ESTATE, AMBATHUR CHENNIA Tamil Nadu
PIN1 : 600098
Phone No. : 9884021703
GSTIN : 33AABCS4985J1Z1 		CHESO66O1A

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) ASSY EXHAUST MANIFOLD[62]() Specification : ASSY EXHAUST MANIFOLD TO DRG NO. SB 418-00-6 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) R Estab
2) FUEL PUMP HOUSING[62]() Specification : FUEL PUMP HOUSING TO DRG NO. SB 3327-01-10 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) R Estab
3) FUEL PUMP DRIVE HOUSING ASSY[62]() Specification : FUEL PUMP DRIVE HOUSING ASSY TO DRG NO. SB 3308-04-24 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
4) REGULATOR BODY[62]() Specification : REGULATOR BODY TO DRG NO. 315-619-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
5) OIL PUMP BODY UTD[38]() Specification : OIL PUMP BODY TO DRG NO. 20-12-121-11 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) R Estab
6) FUEL PUMP BODY V92S2[62]() Specification : FUEL PUMP BODY to DRG.NO: 3327-20-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
7) GOVERNOR BODY UTD 20[62]() Specification : GOVERNOR BODY to DRG.NO: SB 20-15-601-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
8) FUEL PUMP BODY UTD 20[62]() Specification : FUEL PUMP BODY to DRG. NO: SB 20-27-01-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category :
Grade : Grade III
Size : SS
1) Engine Factory Avadi
Name Specification Use Status
1) GOVERNOR BODY CASTING[38]() Specification : GOVERNOR BODY CASTING TO DRG NO. 315-619-8 (AS PER VQC, DRAWINGS & SPECFICATIONS) R Estab
2) FUEL PUMP HOUSING[62]() Specification : FUEL PUMP HOUSING TO DRG NO. SB 3327-01-10 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) R Estab
Category :
Grade : Grade III
Size : SS
1) Engine Factory Avadi
Name Specification Use Status
1) CAM SHAFT BEARING ASSY[62]() Specification : CAM SHAFT BEARING ASSY TO DRG NO. SB 20-06-04 C Estab
Category :
Grade : Grade III
Size : SS
1) Heavy Vehicle Factory
Name Specification Use Status
1) CASTING CASE[02]() Specification : GOST2685-75 R Nonestab
Category : p
Grade : Grade I
Size : SS
1) Heavy Vehicle Factory
Name Specification Use Status
1) ELEMENTS OF MOULD BODY SELECTOR[02]() Specification : ALUMINIUM ALLOYS GOST 2685-75 R Nonestab
Category : p
Grade : Grade III
Size : SS
1) Heavy Vehicle Factory
Name Specification Use Status
1) HOUSING 172 27 126 1 C[02]() Specification : ALUMINIUM CASTING R Nonestab
Category : p
Grade : Grade I
Size : SS
1) Engine Factory Avadi
Name Specification Use Status
1) MOUNTING OF FUEL FILTER ASSY[62]() Specification : MOUNTING OF FUEL FILTER ASSY TO DRG NO.SB 329-75-1 C Estab
Category :
Grade : Grade III
Size : SS
1) Engine Factory Avadi
Name Specification Use Status
1) FUEL PUMP DRIVE HOUSING ASSY[62]() Specification : FUEL PUMP DRIVE HOUSING ASSY TO DRG NO. SB 3308-04-24 C Estab
2) HEAD COVER LH[62]() Specification : HEAD COVER LH TO DRG NO SB 306-09-10 C Estab
3) RH CYLINDRICAL JACKET[62]() Specification : RH CYLINDRICAL JACKET TO DRG NO.SB 303-03-16 C Estab
4) LH CYLINDRICAL JACKET[62]() Specification : LH CYLINDRICAL JACKET TO DRG NO.SB 303-02-23 C Estab
5) RH HEAD COVER[62]() Specification : RH HEAD COVER TO DRG NO.SB 406-08-3 C Estab
6) LH HEAD COVER[62]() Specification : LH HEAD COVER TO DRG NO.SB 306-09-8 C Estab
Category :
Grade : Grade III
Size : SS
1) Heavy Vehicle Factory
Name Specification Use Status
1) SPACING SLEEVE AGAINST TE NO.0301170015 DTD.21/11/2017[02]() Specification : ALUMINUM ALLOYS R Nonestab
Category : p
Grade : Grade III
Size : SS
3366 INDIAN PACKAGING INDUSTRIES
'SHANTINIKETAN', SUITE NO# 10, 2ND FLOOR, 8, CAMAC STREET KOLKATA West Bengal
PIN1 : 700017
Phone No. : 22825436 		CALC07679A

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115 Description : PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115() Specification : PAPER WHITE FINE AMMN. 51 X 76CMS X 84-92 GSM TO SPECN:- JSS-9310-06:2016 ( REV NO.1). R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115 Description : PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115() Specification : PAPER WHITE FINE AMMN. 51 X 76CMS X 84-92 GSM TO SPECN:- JSS-9310-06:2016 ( REV NO.1). R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115 Description : PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115() Specification : PAPER WHITE FINE AMMN. 51 X 76CMS X 84-92 GSM TO SPECN:- JSS-9310-06:2016 ( REV NO.1). R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115 Description : PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115() Specification : PAPER WHITE FINE AMMN. 51 X 76CMS X 84-92 GSM TO SPECN:- JSS-9310-06:2016 ( REV NO.1). R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1423015352 CARTON BOARD 760 X 890 X 0.762 MM Description : 1423015352 CARTON BOARD 760 X 890 X 0.762 MM() Specification : SPECN. NO. JSS 8135- 15 : 2010 (REV. NO. 2 ) C Estab
2) 1422005228 GLAZED BOARD Description : 1422005228 GLAZED BOARD() Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK C Estab
3) 1422000028 GLAZED BOARD Description : 1422000028 GLAZED BOARD() Specification : JSS 8135-13:2007 C Estab
4) 1420215823 GLAZED BOARD 525 mm Description : 1420215823 GLAZED BOARD 525 mm() Specification : JSS 8135-13:2007 C Estab
5) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM Description : 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM() Specification : SPECN. NO. JSS 8135-017 C Estab
6) 1419828815 PAPER WHITE FINE Description : 1419828815 PAPER WHITE FINE() Specification : JSS 9310-06: 2002 C Estab
7) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN Description : 1412879275 PAPER WRAPPING WAXED KRAFT AMMN() Specification : SPECN. NO. JSS-8135-05 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1423015352 CARTON BOARD 760 X 890 X 0.762 MM Description : 1423015352 CARTON BOARD 760 X 890 X 0.762 MM() Specification : SPECN. NO. JSS 8135- 15 : 2010 (REV. NO. 2 ) C Estab
2) 1422005228 GLAZED BOARD Description : 1422005228 GLAZED BOARD() Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK C Estab
3) 1422000028 GLAZED BOARD Description : 1422000028 GLAZED BOARD() Specification : JSS 8135-13:2007 C Estab
4) 1420215823 GLAZED BOARD 525 mm Description : 1420215823 GLAZED BOARD 525 mm() Specification : JSS 8135-13:2007 C Estab
5) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM Description : 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM() Specification : SPECN. NO. JSS 8135-017 C Estab
6) 1419828815 PAPER WHITE FINE Description : 1419828815 PAPER WHITE FINE() Specification : JSS 9310-06: 2002 C Estab
7) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN Description : 1412879275 PAPER WRAPPING WAXED KRAFT AMMN() Specification : SPECN. NO. JSS-8135-05 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1423015352 CARTON BOARD 760 X 890 X 0.762 MM Description : 1423015352 CARTON BOARD 760 X 890 X 0.762 MM() Specification : SPECN. NO. JSS 8135- 15 : 2010 (REV. NO. 2 ) C Estab
2) 1422005228 GLAZED BOARD Description : 1422005228 GLAZED BOARD() Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK C Estab
3) 1422000028 GLAZED BOARD Description : 1422000028 GLAZED BOARD() Specification : JSS 8135-13:2007 C Estab
4) 1420215823 GLAZED BOARD 525 mm Description : 1420215823 GLAZED BOARD 525 mm() Specification : JSS 8135-13:2007 C Estab
5) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM Description : 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM() Specification : SPECN. NO. JSS 8135-017 C Estab
6) 1419828815 PAPER WHITE FINE Description : 1419828815 PAPER WHITE FINE() Specification : JSS 9310-06: 2002 C Estab
7) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN Description : 1412879275 PAPER WRAPPING WAXED KRAFT AMMN() Specification : SPECN. NO. JSS-8135-05 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1423015352 CARTON BOARD 760 X 890 X 0.762 MM Description : 1423015352 CARTON BOARD 760 X 890 X 0.762 MM() Specification : SPECN. NO. JSS 8135- 15 : 2010 (REV. NO. 2 ) C Estab
2) 1422005228 GLAZED BOARD Description : 1422005228 GLAZED BOARD() Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK C Estab
3) 1422000028 GLAZED BOARD Description : 1422000028 GLAZED BOARD() Specification : JSS 8135-13:2007 C Estab
4) 1420215823 GLAZED BOARD 525 mm Description : 1420215823 GLAZED BOARD 525 mm() Specification : JSS 8135-13:2007 C Estab
5) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM Description : 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM() Specification : SPECN. NO. JSS 8135-017 C Estab
6) 1419828815 PAPER WHITE FINE Description : 1419828815 PAPER WHITE FINE() Specification : JSS 9310-06: 2002 C Estab
7) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN Description : 1412879275 PAPER WRAPPING WAXED KRAFT AMMN() Specification : SPECN. NO. JSS-8135-05 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) DISC Description : DISC() Specification : DRG. CIA/AMN/1901 DETAIL.2 PART NO: CIA/AMN/1901 DCI 35462-A DT. 03.03.1993. (MATERIAL : PAPER WHITE FINE TO SPECN. JSS 9310-06:2002 REAFFIRMED 2011) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) DISC Description : DISC() Specification : DRG. CIA/AMN/1901 DETAIL.2 PART NO: CIA/AMN/1901 DCI 35462-A DT. 03.03.1993. (MATERIAL : PAPER WHITE FINE TO SPECN. JSS 9310-06:2002 REAFFIRMED 2011) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) DISC Description : DISC() Specification : DRG. CIA/AMN/1901 DETAIL.2 PART NO: CIA/AMN/1901 DCI 35462-A DT. 03.03.1993. (MATERIAL : PAPER WHITE FINE TO SPECN. JSS 9310-06:2002 REAFFIRMED 2011) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) DISC Description : DISC() Specification : DRG. CIA/AMN/1901 DETAIL.2 PART NO: CIA/AMN/1901 DCI 35462-A DT. 03.03.1993. (MATERIAL : PAPER WHITE FINE TO SPECN. JSS 9310-06:2002 REAFFIRMED 2011) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE AMMUN Description : PAPER WHITE FINE AMMUN() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Estab
Category : p
Grade : 1
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE AMMUN Description : PAPER WHITE FINE AMMUN() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Estab
Category : p
Grade : 1
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE AMMUN Description : PAPER WHITE FINE AMMUN() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Estab
Category : p
Grade : 1
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE AMMUN Description : PAPER WHITE FINE AMMUN() Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM. R Estab
Category : p
Grade : 1
Size : S
3367 SIMRAN ENGINEERING AND ELASTOMERS
PLOT NO.10,GUT NO.48,RANJANGAON(SP),WALUJ MIDC,AURANGABAD NEAR E SECTOR AURANGABAD Maharashtra
PIN1 : 431136
Phone No. : 9823307714
GSTIN : 27AGRPJ3139Q1ZM 		AGRPJ3139Q

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) GASKET RUBBER FOR BOX H2A[99]() Specification : GASKET RUBBER FOR BOX H2A OF VULCANISED NATURAL RUBBER CLASS A TO SPECN.IND/ME/584(F) AS PER DRG.NO.CIA/AMMN/2389 PT.NO. ISV 1727 DC 35607-A (OFB DRG.NO.OFB/SK/712), COLOUR - BLACK NOTE:- THE FIRM SHALL GET SAMPLE APPROVED BEFORE GOING TO E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) STUD FOR CARRIER 13A[23]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION R Nonestab
2) RUBBER GASKET DRG. OFB/C/1165[23]() Specification : RUBBER GASKET DRG. OFB/C/1165 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) 9911833148 RUBBER GASKET A OFB SK 712[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) 9911846306 STUD FOR CARRIER 13A[23]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION R Nonestab
2) O RING FOR AKASH SUSTAINER[01]() Specification : O-RING FOR AKASH SUSTAINER CONTAINER AS PER DRG NO. RPD/AK/CA 01 00 00 01 & DOC NO: DOP/S&SRPD/WF-01 ISSUE NO:04, REV.NO:00 DT: 9/12/2011, DOP/S&SRPD/F-03. SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE. C Nonestab
3) RUBBER GASKET FOR AKASH SUSTAINER[01]() Specification : RUBBER GASKET FOR AKASH SUSTAINER CONATAINER AS PER DRG NO: RPD/AK/CA/01 02 01 098 & DOC NO: DOP/S&SRPD/WF-01 ISSUE NO: 04, REV.NO: 00 DT: 09/12/2011, DOP/S&SRPD/F-03 SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE. C Nonestab
4) RUBBER PAD TOP[01]() Specification : RUBBER PAD TOP FOR AKASH SUSTAINER CONTAINER AS PER DRG NO: RPD/AK/CA/01 02 00 01 & DOC NO. DOP/S&SRPD/F-03 SUPPLIER SHOULD SUBMIT THE MATERIAL TEST CERTIFICATE. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) RUBBER GASKET FOR STEEL PACKAGES 120 MM[07]() Specification : GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB C Nonestab
Category :
Grade : Grade III
Size : S
3368 SWETAMBRAM RUBBER WORKS
D-64, SHYAM NAGAR , KANPUR -208013 SHYAM NAGAR KANPUR NAGAR Uttar Pradesh
PIN1 : 208013
Phone No. : 7897509644 		YJHBTYU0G1

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) TRADE ASSISTANCE FOR CLOSING OPERATION OF BOOT HIGH ANKLE RU PU SOLE OF DIFFRENT SIZES AS PER TERMS and CONDITIONS ENCLOSED[20]() Specification : Specification: Prov. specn. no. IND/TC/3847 (A) & as per terms & conditions enclosed. R Estab
Category :
Grade : Grade III
Size : S
3369 SHREE ENGINEERING ASSOCIATES
VISHNUKAMAL, S.NO.26 HINGANEKHURD, SINHGAD ROAD PUNE MAHARASHTRA
PIN1 : 411051
Phone No. : 9371010637
GSTIN : 27ADHPS2137E1ZM 		PNEJ06144F

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) TURBINE BODY CASTING Description : TURBINE BODY CASTING() Specification : SB 337-111 R Estab
Category : dp
Grade : 2
Size : S
3370 AVTEC LIMITED
Pithampur Industrial Area, Sector III Pithampur, Sagore Dhar Madhya Pradesh
PIN1 : 454774
Phone No. : 405240
GSTIN : 33AAFCA1313C1ZM 		AAFCA1313C

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) Gear Box With Suction Pump and Final Drive (RIGHT) / 175.48.001CB-3CB[62]() Specification : Gear Box With Suction Pump and Final Drive (RIGHT) / 175.48.001CB-3CB E Nonestab
2) Gear Box With Delivery Suction Pumps With Final Drive (LEFT) / 175.48.002CB-3CB[62]() Specification : Gear Box With Delivery Suction Pumps With Final Drive (LEFT) / 175.48.002CB-3CB E Nonestab
Category : p
Grade : Grade II
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) Gear Box With Suction Pump and Final Drive (RIGHT) / 175.48.001CB-3CB[62]() Specification : Gear Box With Suction Pump and Final Drive (RIGHT) / 175.48.001CB-3CB E Nonestab
2) Gear Box With Delivery Suction Pumps With Final Drive (LEFT) / 175.48.002CB-3CB[62]() Specification : Gear Box With Delivery Suction Pumps With Final Drive (LEFT) / 175.48.002CB-3CB E Nonestab
Category : p
Grade : Grade II
Size : L
3371 BIL Metal Industries Limited
Opposite Bhaili Railway Station,P.O. Box-Bhaili, Old Padra Road Vadodara Gujarat
PIN1 : 391410
Phone No. : 0265-2680105
GSTIN : 24AAACB8085H1ZO 		BRDB00773D

Download 		1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BUMPER CROSS MEMBER Description : BUMPER CROSS MEMBER() Specification : BUMPER CROSS MEMBER PT.NO.B8136507(B.0) C Estab
2) BKT CAB MTG REAR LH Description : BKT CAB MTG REAR LH() Specification : BKT.CAB MTG REAR LH PT.NO.B0122906-B C Estab
3) BKT CAB MTG REAR RH Description : BKT CAB MTG REAR RH() Specification : BKT.CAB MTG REAR RH PT.NO.B0122907-B C Estab
4) S A OF FUEL TANK LH 160 LITRE Description : S A OF FUEL TANK LH 160 LITRE() Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2] C Estab
5) S A OF FUEL TANK RH 160 LITRE Description : S A OF FUEL TANK RH 160 LITRE() Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2 C Estab
Category : p
Grade : 2
Size : M
3372 VEE J PEE ALUMINIUM FOUNDRY PRIVATE LIMITED
No.9, SOWRIPALAYAM ROAD, OPP.SUJINI MILLS, COIMBATORE - 641028, TAMILNADU NEAR PRASANNA CHEVROLET SERVICE CENTRE COIMBATORE Tamilnadu
PIN1 : 641028
Phone No. : 2319777
GSTIN : 33AACCV7072Q1ZR 		AACCV7072Q

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) HOUSING 172 27 126 1 C[02]() Specification : ALUMINIUM CASTING R Nonestab
Category : p
Grade : Grade I
Size : S
3373 VETRIVEL FORGINGS
NO.G 48&49, SIDCO INDUSTRIAL ESTATE KAKKALUR THIRUVALLUR TAMIL NADU
PIN1 : 602003
Phone No. : 9600080849 		CHET10758G

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) GEAR Description : GEAR FORGING() Specification : 20-07-16 C Estab
Category : p
Grade : 2
Size : S
3374 SRI VIDYA ENGINEERING INDUSTRIES.
#7-4-156, GROUND FLOOR, MADHAVINAGAR, FEROZGUDA HYDERABAD TELANGANA
PIN1 : 500011
Phone No. : 040-23778171, FAX. 040-23778172 		HYDV04129G

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SEMIFINISH BARREL() DRG. NO. RV-32-MK-III-0301-2 C NOT ESTAB
Category : P
Grade : III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) SEMI FINISH BARREL() DRG. NO. RV-32-MK-III-0301-2. C NOT ESTAB.
Category : P
Grade : III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) EXTRACTOR FOR SMALL ARMS CARTRIDGES IN SOFT CONDITION () AS PER DRG. C Not Estab.
2) PISTON EXTENTION BLANK () AS PER DRG. C Not Estab.
3) SEAR 5.56MM RIFLE (INSAS) () AS PER DRG. C Not Estab.
4) SEAR SAFETY 5.56 RIFLE () AS PER DRG. C Not Estab.
5) CYLINDER GAS 5.56 RIFLE () AS PER DRG. C Not Estab.
6) Sear Carbine Drg. No. AKC-O1/10 () AS PER DRG. C Not Estab.
7) Cocking Handle Carbine Drg No. AKC08/8*, () AS PER DRG. C Not Estab.
8) MOUNTING TRIPOD 7.62MM ASSEMBLY () AS PER DRG. C Not Estab.
Category : P
Grade : III
Size : S
1) Field Gun Factory Kanpur
Name Specification Use Status
1) BARREL BLANK AS PER DRG. NO. SK-01394() AS PER SPECIFICATION/REQUIREMENT C Estab.
Category : DP
Grade : II
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. Description : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.() Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. Description : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.() Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. C Estab
2) SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION. Description : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION.() Specification : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION. C Estab
Category : p
Grade : 3
Size : S
3375 VIMAL PAINTS PVT. LTD
C-18/4, HINGNA INDL ESTATE, MIDC, NAGPUR HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440028
Phone No. : 237610
GSTIN : 27AABCV4597P1ZF 		NGPV03369C

Download 		1) Ordnance Factory Bolangir
Name Specification Use Status
1) APC-224(SHELLAC VARNISH 20%)[10]() Specification : APC-224(SHELLAC VARNISH 20%) TO SPECN. NO.JSS-8010-63:2012(REV-3), DC NO.5101-ME, DT.21.12.12. [TO BE SUPPLIED IN 01-LTR PACK] R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) PAINT READYMIXED (OLIVE GREEN) QUICK DRYING MATT FINISH[10]() Specification : PAINT READY MIXED (OLIVE GREEN) QUICK DRYING MATT FINISH FOR GENERAL PURPOSE OF IS-220 OF IS-5-2007 (SIXTH REVISION) TO SPECN: IS-168-1993(3RD REV.) MODE OF APPLICATION-SPRAYING, AS APPLICABLE FOR DEFENCE USE. (TO BE SUPPLIED IN 1-LTR PAC R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) APC-201[10]() Specification : APC-201 TO SPECN.JSS-8010-63, 2012 REV-3 DC 5101 ME DT.21.12.12. R Nonestab
2) APC-219 TO JSS-8010-48:2012 (REV-2) DC NO.5095-ME, DT-05.10.2012.(ORANGE & RED).[10]() Specification : APC-219 TO JSS-8010-48:2012 (REV-2) DC NO.5095-ME, DT-05.10.2012.(ORANGE & RED). R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A Description : SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A() Specification : AS PER REQUIREMENT C Estab
2) PAINT FINISHING CHLORINATED RUBBER TYPE SPRAYING Description : PAINT FINISHING CHLORINATED RUBBER TYPE SPRAYING() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A Description : SHELLAC LACQUER APC-211 TIN WITH DYE AURAMINE FOR BODY, FUZE DA 5A() Specification : AS PER REQUIREMENT C Estab
2) PAINT FINISHING CHLORINATED RUBBER TYPE SPRAYING Description : PAINT FINISHING CHLORINATED RUBBER TYPE SPRAYING() Specification : AS PER REQUIREMENT C Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN_1012700743 Description : PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN_1012700743() Specification : PAINT R/M AIRDRYING MATT ORTHOXYLENE BASED ZINC CHROME RED OXIDE TO SPECN.IND/ ME/ 964(PROV), DCI 5262-ME, DT-24.06.14, MODE OF APPLICATION-SPRAYING/ BRUSHING/ DIPPING/ POUR, FOR INNER COATING OF HE. SHELL. [TO BE SUPPLIED IN 500ML P P Estab
2) PAINT READYMIXED(SIGNAL RED)AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE Description : PAINT READYMIXED(SIGNAL RED)AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE() Specification : FOR PACKAGE & PETROL CONTAINERS ISC-537 OF IS:5-2007 (SIXTH REVISION) AMMENDMENT NO.1,SPECN.IS-138-1992 (3RD.REV.) MODE OF APPLICATION -STENCILLING. AS APPLICABLE FOR DEFENCE USE (TO BE SUPPLIED IN 500 ML PACK). P Estab
3) PAINT R.MIXED MARKING GOLDEN YELLOW ISC-356 OF IS 5-2007 Rev-6 Description : PAINT R.MIXED MARKING GOLDEN YELLOW ISC-356 OF IS 5-2007 Rev-6() Specification : ISC-356 OF IS 5-2007 Rev-6, REAF - 2017 TO SPECN. IS-138-1992 (3RD REV.) FOR PACKAGES, MODE OF APPLICATION-STENCILLING. [TO BE SUPPLIED IN 500 ML PACK] P Estab
4) PAINT READYMIXED MARKING WHITE Description : PAINT READYMIXED MARKING WHITE() Specification : PAINT READYMIXED MARKING WHITE, TYPE-STENCILLING, FINISH-SMOOTH, SEMI GLOSSY TO SPECN:IS.138- 1992 (3RD REV.) (TO BE SUPPLIED IN 500 ML PACK) P Estab
Category : p
Grade : 3
Size : S
3376 UNIVERSAL STEEL PRODUCTS
22/3, A.K. MUKHERJEE ROAD KOLKATA WB
PIN1 : 700090
Phone No. : 9830707823 		CALK05571G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM Description : BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM() Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition C Estab
2) LOCK RETAINER IN FINISHED CONDITION Description : LOCK RETAINER IN FINISHED CONDITION() Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10. C Estab
Category : p
Grade : 3
Size : S
3377 M/S PUSHPA SPRINGS
NEW NO.63, OLD NO.20, SAIDAPET VELACHERY ROAD CHENNAI TAMIL NADU
PIN1 : 600015
Phone No. : 9445515572 		3396086009

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Spring.. Description : Spring..() Specification : 312-12-4 C Estab
Category : ddp
Grade : 1
Size : S
3378 NEWALL ENGINEERING WORKS
NO.L-4 AMBATTUR INDUSTRIAL ESTATE CHENNAI TAMIL NADU
PIN1 : 600058
Phone No. : 044 4215200
GSTIN : 33AASPS4710K1ZC 		AASPS4710K

Download 		1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Holder Description : Holder() Specification : 303-43-1 C Estab
2) Clip Description : Clip() Specification : 039-05-008 C Nonestab
Category : ddp
Grade : 1
Size : S
3379 SHARMA ENGINEERING WORKS
26-B/2-F, CO-OPERATIVE INDUSTRIAL ESTATE DADA NAGAR KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 9918869783 		ABLFS1720K

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Blank for Plunger handle carrying FOR LMG 5 56 Description : Steel Blank for Plunger handle carrying FOR LMG 5 56() Specification : STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273. C Estab
2) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56 Description : PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Estab
3) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
4) PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006 Description : PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006() Specification : PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006 C Estab
5) FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION. Description : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION.() Specification : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION. C Estab
6) BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM Description : BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM() Specification : AS PER DRG. C Estab
7) SECURING NUT GAS REGULATOR FOR MAG Description : SECURING NUT GAS REGULATOR FOR MAG() Specification : DS CAT NO.5310-002662 DC(I) 25349-SA DT.30.4.02 (MATL.ST.RD.19.05 MM DIA GD.605M36 FROM L.F.NO.0283000019 WILL BE SUPPLIED BY S.A.F.ON B/G.)AS PER DRGAS PER DRG C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Blank for Plunger handle carrying FOR LMG 5 56 Description : Steel Blank for Plunger handle carrying FOR LMG 5 56() Specification : STEEL BLANK FOR PLUNGER HANDLE CARRYING TO DRG.NO-SK-5273. C Estab
2) PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56 Description : PIN CARRYING HANDLE IN FINISHED CONDITION FOR LMG5 56() Specification : PIN CARRYING HANDLE TO DRG NO-ARDE/SK-3146/33 IN FINISHED CONDITION. DS CAT NO. 5315-030876,DC(I)NO.26946-SA DT.-22/09/2016 C Estab
3) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
4) PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006 Description : PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006() Specification : PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006 C Estab
5) FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION. Description : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION.() Specification : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION. C Estab
6) BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM Description : BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM() Specification : AS PER DRG. C Estab
7) RIVET TO DRG. NO. SKM 876A Description : RIVET TO DRG. NO. SKM 876A() Specification : RIVET TO DRG. NO. SKM 876A C Estab
8) SECURING NUT GAS REGULATOR PART NO 2013 Description : SECURING NUT GAS REGULATOR PART NO 2013() Specification : S CAT NO. 5310-002662 DC(I) NO. 25349-SA DT- 30.04.2002 C Estab
9) SECURING NUT GAS REGULATOR FOR MAG Description : SECURING NUT GAS REGULATOR FOR MAG() Specification : DS CAT NO.5310-002662 DC(I) 25349-SA DT.30.4.02 (MATL.ST.RD.19.05 MM DIA GD.605M36 FROM L.F.NO.0283000019 WILL BE SUPPLIED BY S.A.F.ON B/G.)AS PER DRGAS PER DRG C Estab
10) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
11) 8. RIVET FRONT GUIDE MEDIUM Description : 8. RIVET FRONT GUIDE MEDIUM() Specification : DS CAT NO. 5320-002936 C Estab
12) LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION. Description : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.() Specification : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
3380 Ray Enterprises
18 Industrial Estate Ambala Cantt. Haryana
PIN1 : 133001
Phone No. : 0171-2699399 		AACFR1161P

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Lantern Electric 1A DS CAT No. Y3/6230-000012 Description : Lantern Electric 1A DS CAT No. Y3/6230-000012() Specification : AS PER DRG. C Estab
2) LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION. Description : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.() Specification : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Dehradun

[ENR Registration]
Name Specification Use Status
1) FACE MASK TO DRG NO MCT 1337 Description : FACE MASK TO DRG NO MCT 1337() Specification : FACE MASK TO DRG NO.MCT-1337 COMPRISING OF DRG NO. MCT-1885,1337/1 SH.-3 1878/1, 1879/1, 1337/1 SH.-2, 1860/1, 1886/1 ASSY DRG NO.MCT-1337. C Estab
2) ADJUSTING DRUM TOCQA I 793 35 Description : ADJUSTING DRUM TOCQA I 793 35() Specification : ADJUSTING DRUM TO DRG. NO.CQA(I)-793/35 2/SET. FOR TELE SIGHT MK-III C Estab
3) EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS Description : EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS() Specification : "EYE PIECE WITHOUT EYE PIECE -II CONSISTING OF 2 COMPONENTS:- 1.EYE PIECE SPACER RING DRG. MCT-2509,1/SET, 2. EYEPIECE SCREW RING TO DRG., MCT-2504,1/SET . FOER TELE,SIGHTING-MK-III. C Estab
4) ERECTING SYSTEM CONSIST OF 3 COMPONENTS Description : ERECTING SYSTEM CONSIST OF 3 COMPONENTS() Specification : ERECTING SYSTEM CONSIST.OF 3 COMPONENTS 1.SPACER RING, MCT-2501, 1/SET 2.SPACER TUBE,MCT-2502, 1/SET 3.SCREW RING,MCT-2503, 2/SET FORTEL.SIGHT MK-III, C Estab
Category : p
Grade : 2
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Lantern Electric 1A DS CAT No. Y3/6230-000012 Description : Lantern Electric 1A DS CAT No. Y3/6230-000012() Specification : AS PER DRG. C Estab
2) LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION. Description : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.() Specification : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S