Specification : INSULATION TAPE TO DRG NO TBRL/MMG H MK 1 046/R 1
C
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) FABRIC PLAIN SILK FINE ITEM CODE 2101718582
Description : FABRIC PLAIN SILK FINE ITEM CODE 2101718582()
Specification : FABRIC PLAIN SILK FINE, UNPROOFED, UNBLEACHED GSM BETWEEN 40 TO 50.88 GM SPECN. JSS-8305-22-2017 (REV NO. 4) FOR FUZE DASD OF AK-630 AMMN. (NAVY)
C
Nonestab
2) PROPELLANT BAG EMPTY FOR 125MM FSAPDS LF NUMBER 9911358720
Description : PROPELLANT BAG EMPTY FOR 125MM FSAPDS LF NUMBER 9911358720()
Specification : PROPELLANT BAG EMPTY FOR 125MM FSAPDS PRACTICE AMMUNITION AS PER DRG NO.ISX 411
C
Nonestab
3) SET OF LIGHTERS AND FLASH REDUCER LF 9911358663
Description : SET OF LIGHTERS AND FLASH REDUCER LF 9911358663()
Specification : SET OF LIGHTER AND FLASH REDUCER COVER WITH GASKET CONSISTING OF. (I) BAG OF LIGHTER LOWER AS PER DRAWING TRD-2.1.3470 & TRD-2.1.3471 QTY.1 NO. (II) BAG AS LIGHTER UPPER AS PER DRAWING TRD-2.1.3474 & TRD-2.1.3475 QTY.1 NO. (III) GASKET AS
C
Nonestab
4) FABRIC EXCELESSIOR FOR 125MM FSAPDS LF 9911358541
Description : FABRIC EXCELESSIOR FOR 125MM FSAPDS LF 9911358541()
Specification : FABRIC EXCELESSIOR FOR 125MM FSAPDS SIZE (40 +/-2) X (820 +/- 2) MM AS PER SPECIFICATION NO GHOST 20023-89 ANS QAP NO F3/MANGO PROJECT/21-22 DATE 05 10 2021
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) COTTON FABRIC PERCALE A 85 BROWN LF 2101718583
Description : COTTON FABRIC PERCALE A 85 BROWN LF 2101718583()
Specification : COTTON FABRIC PERCALE A-85 BROWN SHEETING WITH FINISHING OZ-OP AS PER SPECIFICATION GOST 12125-66 D=105 (PLUS/MINUS) 5 AND QAP NO. F-3/MANGO PROJECT/21-22, DT 27/11/2021.
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILL BOARD 600 X 750 X 2MM LF 1421203629
Description : MILL BOARD 600 X 750 X 2MM LF 1421203629()
Specification : CARD BOARD/MILL BOARD TO SPECIFICATION JSS9310-01-2007 REV 2 SIZE 600 X 750MM X 2MM THICK
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) LABEL GOVT EXP TRD 703 D LF 2567130032
Description : LABEL GOVT EXP TRD 703 D LF 2567130032()
Specification : GOVT. EXPLOSIVE LABEL (STICKER LABEL) TO DRG. NO. TRD-703 d.
R
Nonestab
2) SEAL ADH PERMACEL TYBCAL LF 2513613001
Description : SEAL ADH PERMACEL TYBCAL LF 2513613001()
Specification : PERMACEL TYBCAL SF WITH INTERLINER SELF ADHESIVE SEAL TO DRGNO: TRD 994-C.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)
Description : MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)()
Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3
C
Nonestab
3) PAPER BOARD CORRUGATED LF 1411817752
Description : PAPER BOARD CORRUGATED LF 1411817752()
Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK.
C
Nonestab
4) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313
Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313()
Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16
C
Nonestab
5) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178
Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178()
Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.
C
Nonestab
6) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676
Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676()
Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PAPER LAMINATED GR.3 0.65 TO 0.73MM (1410010084)
Description : PAPER LAMINATED GR.3 0.65 TO 0.73MM (1410010084)()
Specification : PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.
P
Estab
2) PAPER LAMINATED GRADE I WIDTH 130MM (1410017165)
Description : PAPER LAMINATED GRADE I WIDTH 130MM (1410017165)()
Specification : PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.
P
Estab
3) PAPER LAMINATED GR.1 60.96 /91.44CM (1410017170)
Description : PAPER LAMINATED GR.1 60.96 /91.44CM (1410017170)()
Specification : PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.
P
Estab
4) PAPER LAMINATED GR.1 0.25 TO 0.33MM (1410017178)
Description : PAPER LAMINATED GR.1 0.25 TO 0.33MM (1410017178)()
Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.
P
Estab
5) PAPER BOARD CORRUGATED LF 1411817752
Description : PAPER BOARD CORRUGATED LF 1411817752()
Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK.
P
Estab
6) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313
Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313()
Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16
P
Estab
7) PAPER CRAFT JSS 8135017 2002 LF 1412438713
Description : PAPER CRAFT JSS 8135017 2002 LF 1412438713()
Specification : PAPER CRAFT AMMN. TO SPECN. NO.JSS-8135-17:2016(REV NO.1) DC NO.5493-ME DT.24/09/2016 SIZE 482.6X635 MM WIDTH BURSTINGSTRENGTH MIN 340 KPa AND 125+/-5 GSM.
P
Estab
8) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515
Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515()
Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011.
P
Estab
9) PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115
Description : PAPER WHITE FINE 51X76CMSX84 92 GSM LF 1415562115()
Specification : PAPER WHITE FINE AMMN. 51 X 76CMS X 84-92 GSM TO SPECN:- JSS-9310-06:2016 ( REV NO.1).
P
Estab
10) PAPER LAMINATED GR.III (102MM) (1418947290)
Description : PAPER LAMINATED GR.III (102MM) (1418947290)()
Specification : PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.
P
Estab
11) MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)
Description : MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)()
Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA
P
Estab
12) CARTON BOARD 78.74X111.76CMX0.508MM FOR CARTG. 303
Description : CARTON BOARD 78.74X111.76CMX0.508MM FOR CARTG. 303()
1) O RING 67 5X2 4 F1301 043760 D LF 2013436145
Description : O RING 67 5X2 4 F1301 043760 D LF 2013436145()
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED-01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
R
Estab
2) O RING 68.6X2.2 MM F1301-024240-B (2013200384)
Description : O RING 68.6X2.2 MM F1301-024240-B (2013200384)()
Specification : O RING GASKET DIA. 68.6+/-0.4X2.2+/-0.1MM DIA TO DRG.NO. F-1301-024240-B DC NO. 36345-A DT. 29/10/97 MATERIAL SPECN: IND/ME/884 (PROV.)
R
Estab
3) 'O' RING 78X2 (2013436144)
Description : 'O' RING 78X2 (2013436144)()
Specification : 'O' RING 78X2 (2013436144)
R
Estab
4) O RING LF 2058130006
Description : O RING LF 2058130006()
Specification : "O" RING 12.3X2.4 DRG F1301-042800C
R
Estab
5) SEALING RING TO DRG. F-1301-061431A (2058130001)
Description : SEALING RING TO DRG. F-1301-061431A (2058130001)()
Specification : SEALING RING TO DRG NO-F1301-061431-A DC NO.35057-A DATE : 22/3/91
R
Estab
6) O RING LF 2013200397
Description : O RING LF 2013200397()
Specification : "O" RING 51.8X3MM F1301-01750-F
R
Estab
7) O RING LF 6170444300
Description : O RING LF 6170444300()
Specification : "O" RING 23.3X2.4 F1301-046570-C
R
Estab
8) SET CONSISTING OF 3 RUBBER COMPONENTS LF 9911356367
Description : SET CONSISTING OF 3 RUBBER COMPONENTS LF 9911356367()
Specification : SET CONSIST OF 3 COMPT. (1) GASKET TO DRG NO. 4-26941-014 DC NO 36761-A DT 1/6/01 (2) GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01 (3) SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT 1/6/01 MATERIAL FOR ABOVE ITEM 1-3 SPCEN:IND/
R
Estab
9) RING SEALING TOROIDAL FOR 106 MM RCL LF 6261200400
Description : RING SEALING TOROIDAL FOR 106 MM RCL LF 6261200400()
Specification : RING SEALING TOROIDAL FOR 106MM RCL
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
P
Estab
2) MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)
Description : MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)()
Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA
1) CONTAINER PLASTIC NO P 17 FOR PUFF LF 9911353558
Description : CONTAINER PLASTIC NO P 17 FOR PUFF LF 9911353558()
Specification : CONTAINER NO.P-17(EMPTY ASSY)TO DRG NO.ARDE 1910/1 ASSEMBLEDWITH (I) BODY TO DRG. NO.TRD-1282'b' (II) LID TO DRG.NO.TRD-1283'b'AND (III)RING TO DRG.NO.TRD-1284 'a'.
C
Estab
Category : p
Grade : 3
Size :
S
3229
JAYSHREE PACKAGING INDUSTRIES
14, BHATTACHARJEE PARA LINE KOLKATA WEST BENGAL
PIN1 : 700036
Phone No. : 07612743368
1) CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)
Description : CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
P
Estab
2) CARRIER 12A ISV-470A ASY"B" FOR TPT(6573800100)
Description : CARRIER 12A ISV-470A ASY"B" FOR TPT(6573800100)()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
P
Estab
Category : p
Grade : 3
Size :
S
3232
Super Bond Mfg Pvt Ltd
89,AJC BOSE ROAD,5TH FLOOR.KOLKATA - 700014 89,AJC BOSE ROAD,5TH FLOOR.KOLKATA - 700014 Kolkata West Bengal
PIN1 : 700014
Phone No. : 22652094 GSTIN : 19AAECS4979F1ZV
1) CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)
Description : CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.
R
Estab
3) TIMBER M/H/C/CHIK/CHIR 19X94X1.5 M (2255548310)
Description : TIMBER M/H/C/CHIK/CHIR 19X94X1.5 M (2255548310)()
Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG
R
Estab
4) PLYWOOD 6MM X 5PLY X 1.2M X 1.2M (2270433342)
Description : PLYWOOD 6MM X 5PLY X 1.2M X 1.2M (2270433342)()
Specification : PLYWOOD TYPE MR GRADE TYPE BB SIZE 6MM x 5PLY x 1.2M x 1.2M SPECN: IS-303-1989 (3rd REVISION). REAFFIRMED-2008 DC NO.5122-ME DT.06/05/2013 WITH AMENDMENT NO.6 AUGUST 2007 WITH ISI MARK.
R
Estab
5) PACKING FITMENT STEEL FOR BOX M 167 LF 9911357452
Description : PACKING FITMENT STEEL FOR BOX M 167 LF 9911357452()
Specification : PACKING FITMENT STEEL FOR BOX M-167
C
Estab
6) CATCH LOCK ASSY DRG.NO. IA-1053 4 CO (9911358061)
Description : CATCH LOCK ASSY DRG.NO. IA-1053 4 CO (9911358061)()
Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP
C
Estab
7) PLATE ANGLE 64MM X 64MM FOR CRATES (9911358104)
Description : PLATE ANGLE 64MM X 64MM FOR CRATES (9911358104)()
Specification : DRG.NO. ISV 8 DC NO. 35855-A DT. 23/11/1994
1) PAPER LAMINATED GR III WIDTH 127MM (1410010078)
Description : PAPER LAMINATED GR III WIDTH 127MM (1410010078)()
Specification : PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002
R
Estab
2) PAPER LAMINATED GR.3 0.65 TO 0.73MM (1410010084)
Description : PAPER LAMINATED GR.3 0.65 TO 0.73MM (1410010084)()
Specification : PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.
R
Estab
3) PAPER LAMINATED GR.III (102MM) (1418947290)
Description : PAPER LAMINATED GR.III (102MM) (1418947290)()
Specification : PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.
R
Estab
4) CONTAINER 12-B/L FOR 40MM L/70, PFFC (9911350355)
Description : CONTAINER 12-B/L FOR 40MM L/70, PFFC (9911350355)()
Specification : AMMUNITION CONTAINER 12-B/L DRG.PT NO.ISV-393-A, DC-35470-A DT.12/03/93. SPECN:- CQA(A)-2805(h) DC NO. 36145-ANOTE:1.SPECIAL INSTRUCTION FOR TEST FOR AMMN. CONTAINER 12B/L IS ENCLOSED. 2.ADVANCE SAMPLE 15 NOS. ARE REQUIRED WHEN ITEM IS BE
P
Estab
Category : p
Grade : 3
Size :
S
3236
LUCKY ENGG COMPANY
28, NEW JHILMIL INDUSTRIAL CPOMPLEX, G.T ROAD SHAHADHARA DELHI
PIN1 : 110095
Phone No. : 07612743368
1) SWITCH NO 5 EMPT. W/O SNOUT SWITCH (9911357321)
Description : SWITCH NO 5 EMPT. W/O SNOUT SWITCH (9911357321)()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
Specification : SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt
C
Estab
3) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)
Description : SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Estab
4) STRIKER STEEL TO DRG NO ITW-65 (6140600400)
Description : STRIKER STEEL TO DRG NO ITW-65 (6140600400)()
Specification : STRIKER STEEL TO DRG PT.NO. ITW-65 DC 35817-A DT. 27/9/94
1) CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)
Description : CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
P
Estab
2) CARRIER 12A ISV-470A ASY"B" FOR TPT(6573800100)
Description : CARRIER 12A ISV-470A ASY"B" FOR TPT(6573800100)()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
1) PRIMER GASKET F1301 036530 D LF 2013436143
Description : PRIMER GASKET F1301 036530 D LF 2013436143()
Specification : PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
C
Estab
2) O RING 67 5X2 4 F1301 043760 D LF 2013436145
Description : O RING 67 5X2 4 F1301 043760 D LF 2013436145()
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED-01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
C
Estab
3) CARRIER 12A ISV-470A ASY"B" FOR TPT(6573800100)
Description : CARRIER 12A ISV-470A ASY"B" FOR TPT(6573800100)()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
P
Estab
4) CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)
Description : CARRIER 11A ISV-468A FOR HE&ILLU(6573810100)()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
P
Estab
5) O RING 68 6X2 2MM F1301 024240 B LF 2013200384
Description : O RING 68 6X2 2MM F1301 024240 B LF 2013200384()
Specification : "O"RING GASKET DIA 68.6+/-0.4 X 2.2+/-0.1 MM DIA TO DRG NO. F-1301-024240-B DC NO. 36345-A DT 29/10/97MATERIAL SPECN:- IND/ME/884:2015 COMPOUND NO C-5 WITHHARDNESS DEGREE BS-70-75 DC-NO.5403-ME DT 1-02-2016
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) O RING 043 LF 9911357599
Description : O RING 043 LF 9911357599()
Specification : FOR MULTIMODE GRD
C
Estab
2) FRAGMENTING SLEEVE 038 MULTIMODE GR LF 9911357594
Description : FRAGMENTING SLEEVE 038 MULTIMODE GR LF 9911357594()
Specification : FRAGMENTING SLEEVE 038 MULTIMODE GR
C
Estab
3) BALL INSERT FRONT & REAR (9911339844)
Description : BALL INSERT FRONT & REAR (9911339844)()
Specification : BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOP
C
Estab
4) SLIPPING RING (6770430100)
Description : SLIPPING RING (6770430100)()
Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01
Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED, PLAINED BOTH SIDE TO SPECN. NO. IND/ME/883(F) 2015 DC NO 5452 ME DT 01.06.2016. SIZE - 19MM X 75MM X 1.25 MTR LONG.
R
Estab
5) TIMBER M/H/C/CHIK/CHIR 19X94X1.5 M (2255548310)
Description : TIMBER M/H/C/CHIK/CHIR 19X94X1.5 M (2255548310)()
Specification : TIMBER M/H/C/CHIK/CHIR PLANKS KILN SEASONED AND PRESSURE TREATED,PLAINED BOTH SIDE TO SPECN.NO.IND/ME/883(f) 2015 DC NO.5452 ME DT.01/06/2016 SIZE- 19MM X 94MM X 1.50 MTR LONG
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
Specification : CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED W