1) PIN CAT 1255 PIN 41 774 X 90MM LONG TO DRG NO IMPD0988
Description : PIN CAT 1255 PIN 41 774 X 90MM LONG TO DRG NO IMPD0988()
Specification : PIN CAT-1255(PIN 41.774 X 90MM LONG) TO DRG. NO. IMPD0988.
C
Estab
2) STRAP CAT 1150 TO DRG NO IMPD 0981
Description : STRAP CAT 1150 TO DRG NO IMPD 0981()
Specification : STRAP(CAT-1150) TO DRG.NO.IMPD 0981
C
Estab
3) CONE HANDLE CAT PART NO 14 5340 001021 TO DRG NO ISK 0439
Description : CONE HANDLE CAT PART NO 14 5340 001021 TO DRG NO ISK 0439()
Specification : CONE HANDLE CAT.PART NO.14/5340-001021 TO DREG.NO.ISK-0439.
C
Estab
4) CUP SPRING 30 MM OD X 16 point 3 MM ID X 0 point 7 MM THICK ITEM 13 CAT PART NO 14 5420 001022 TO DRAWING NO CAT 1160 A DC ES 14 224 DT 3 10 84
Description : CUP SPRING 30 MM OD X 16 point 3 MM ID X 0 point 7 MM THICK ITEM 13 CAT PART NO 14 5420 001022 TO DRAWING NO CAT 1160 A DC ES 14 224 DT 3 10 84()
Specification : CUP SPRING 30 MM O/D X 16.3 MM I/D X 0.7 MM THICK ITEM 13 CAT PART NO. 14/5420-001022 TO DROWING NO.CAT-1160/A.DC.ES/14/224 DT.3.10.84 .
C
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) Handle with Handle Clip for Box C-53A[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
2) CARRYING LINK[99]()
Specification : DRG.NO OFB/C/1540
E
Nonestab
3) HANDLE AND HANDLE CLIP ASSEMBLY[99]()
Specification : DRG, NO.OFB/C/1564
E
Nonestab
4) HANDLE AS PER DRG. NO. OFB/C/1757[99]()
Specification : AS PER O.F.BSL DRAWING/SPECIFICATION
E
Nonestab
5) CATCH[99]()
Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994.
E
Nonestab
6) BRACKET A-1 FOR BOX C-53A[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
7) HINGE - AS PER DRG. NO. OFB/C/1565[99]()
Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION
E
Nonestab
8) Hinge[99]()
Specification : Drg.No. OFB/C/1410-A
E
Nonestab
9) PIECE PACKING FOR BOX SM 601[99]()
Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
E
Nonestab
10) LID CORNER PIECE FOR BOX C-53A[99]()
Specification : AS PER DRG./SPECIFICATION
E
Nonestab
11) PIECE PACKING 'B'[99]()
Specification : AS PER DRG NO. OFB/C/1541
E
Nonestab
12) BRACKET B-1 FOR BOX C-53A[99]()
Specification : AS PER OFB DRG NO. OFB/C/1487 & ISV 2049
E
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT
Description : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT()
Specification : ROLL PIN TO OFAJ DRG NO FS 3022 WITHOUT HEAT TREATMENT AND SURFACE TREATMENT
R
Estab
2) ROLL PIN TO OFAJ DRG NO FS 516 A
Description : ROLL PIN TO OFAJ DRG NO FS 516 A()
Specification : ROLL PIN TO OFAJ DRG. NO.FS-516 A
R
Estab
Category : ddp
Grade : 1
Size :
S
1Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) WASHER N5 1 10
Description : WASHER N5 1 10()
Specification : WASHER TO DRG. NO . N5-1-10.5x 22 IN F/C
C
Estab
2) PIN COTTER SPLIT TO DRG NO N4 8 2X12 OR 10
Description : PIN COTTER SPLIT TO DRG NO N4 8 2X12 OR 10()
Specification : PIN COTTER SPLIT TO DRG NO N4-8-2X12 OR 10
C
Estab
3) CLIP SPRING 5340 015295
Description : CLIP SPRING 5340 015295()
Specification : CLIP SPRING TO D.S. CAT NO 5340-015295 IN FINISHED CONDITION
C
Estab
4) WASHER 003178
Description : WASHER 003178()
Specification : WASHER TO D.S CAT. NO. 5310-003178 IN FINISHED CONDITION
C
Estab
5) PLATE LEVER SEAR TO DRG NO M 8276A PB 12 IN F C
Description : PLATE LEVER SEAR TO DRG NO M 8276A PB 12 IN F C()
Specification : PLATE LEVER SEAR TO DRG. NO. M-8276A (PB-12) IN F/C
C
Estab
6) PIN SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0030 A
Description : PIN SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0030 A()
Specification : AS PER DRAWING
C
Estab
7) SPRING RETURN IN F/C TO GSF DRG NO M-8278A (PB-14)
Description : SPRING RETURN IN F/C TO GSF DRG NO M-8278A (PB-14)()
Specification : AS PER DRAWING
C
Estab
8) SCREW DRIVER TO DRG NO 5064158 IN FC
Description : SCREW DRIVER TO DRG NO 5064158 IN FC()
Specification : SCREW DRIVER TO DRG. NO. 5064158 IN F/C
78) WASHER SPRING IN FC TO DRG NO ARDE 1593 DET NO 8
Description : WASHER SPRING IN FC TO DRG NO ARDE 1593 DET NO 8()
Specification : WASHER SPRING IN F/C TO DRG.NO.ARDE-1593,DET.NO.8
C
Estab
79) PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION
Description : PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION()
Specification : PLUG REAR TO DRG NO ITV 52 IN FINISHED CONDITION
C
Estab
80) COAPLER RING GUARD SIZE ID 125MM X 4 MM THICK X 14 MM
Description : COAPLER RING GUARD SIZE ID 125MM X 4 MM THICK X 14 MM()
Specification : COAPLER RING (GUARD) SIZE: ID- 125MM X 4 MM THICK X 14 MM
C
Estab
81) COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND
Description : COAPLER RING GUARD 125 MM HEAT BODY COPPER BAND()
Specification : COAPLER RING (GUARD) 125 MM HEAT BODY COPPER BAND
C
Estab
82) SPRING PIN SECURING COIL TO R F I SK NO 3342 IN FC
Description : SPRING PIN SECURING COIL TO R F I SK NO 3342 IN FC()
Specification : SPRING PIN SECURING COIL TO R.F.I SK. NO.3342 IN FC
C
Estab
83) SPRING PIN BOLT CATCH TO DS CAT NO 5315 008414
Description : SPRING PIN BOLT CATCH TO DS CAT NO 5315 008414()
Specification : SPRING PIN BOLT CATCH TO DS CAT NO 5315 008414
C
Estab
84) WASHER SPRING IN FINISHED CONDITION TO DRG NO ARDE 1593 DET NO 8
Description : WASHER SPRING IN FINISHED CONDITION TO DRG NO ARDE 1593 DET NO 8()
Specification : WASHER SPRING IN F/C TO DRG NO ARDE 1593, DET. NO. 8
C
Estab
85) MACHINING AND PROCESSING OF PLUG REAR ITV 52 FOR 81 M
Description : MACHINING AND PROCESSING OF PLUG REAR ITV 52 FOR 81 M()
Specification : MACHINING AND PROCESSING OF PLUG REAR ( ITV 52) FOR 81 M
C
Estab
Category : ddp
Grade : 3
Size :
S
1Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) TRIGGER SPRING 165140
Description : TRIGGER SPRING 165140()
Specification : TRIGGER SPRING TO DRG. NO. IRCL 564 (GF 165140L) IN F/C
C
Estab
2) SPRING TRIGGER SEAR TO DRG NO GF 125075
Description : SPRING TRIGGER SEAR TO DRG NO GF 125075()
Specification : SPRING TRIGGER SEAR TO DRG NO GF 125075 TO DC(I) NO. 19106-W, DT:-16.01.08 IN F/C
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) SPLIT COTTER PIN DIA 4 X 20 COTTER SPLIT PIN MILD STEEL DIA 4 X 20 MM LONG TO DRG NO IMPD 0990
Description : SPLIT COTTER PIN DIA 4 X 20 COTTER SPLIT PIN MILD STEEL DIA 4 X 20 MM LONG TO DRG NO IMPD 0990()
Specification : SPLIT COTTER PIN DIA. 4 X 20 (COTTER SPLIT PIN MILD STEEL DIA.4 X 20 MM LONG) TO DRG. NO. IMPD 0990.
C
Estab
2) DUBO RETAINING RING FORM 303 CAT 1439 RING RETAINING NYLON 8 POINT 1 ID X 14 OD X 3 POINT 3 MM THICK TO DRG NO IMPD 0998
Description : DUBO RETAINING RING FORM 303 CAT 1439 RING RETAINING NYLON 8 POINT 1 ID X 14 OD X 3 POINT 3 MM THICK TO DRG NO IMPD 0998()
Specification : DUBO RETAINING RING FORM 303 CAT-1439 (RING RETAINING NYLON 8.1 ID X 14 OD X 3.3MM THICK) TO DRG. NO. IMPD 0998.
C
Estab
3) SPLIT COTTER PIN DIAMETER 5 OF SR NO 2 TO DRG NO IMPD 0986
Description : SPLIT COTTER PIN DIAMETER 5 OF SR NO 2 TO DRG NO IMPD 0986()
Specification : SPLIT COTTER PIN DIAMETER 5 OF SR. NO.2 TO DRG. NO.IMPD 0986.
C
Estab
Category : ddp
Grade : 1
Size :
S
1Machine Tool Proto Type Factory
[ENR Registration]
Name
Specification
Use
Status
1) 7118000086 PLUG REAR TO DRG NO ITV 52
Description : 7118000086 PLUG REAR TO DRG NO ITV 52()
Specification : PLUG REAR TO DRG.NO:ITV-52
C
Estab
Category : p
Grade : 3
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) SCREW FOR 120MM FSAPDS[01]()
Specification : SCREW FOR SHOT 120MM FSAPDS EMPTY AS PER DRAWING C SCW 120 1 602 REV 0
P
Nonestab
Category : p
Grade : Grade III
Size :
S
3042
BHANDARI INDUSTRIAL CORPORATION
32/34 C P TANK ROAD MUMBAI 400 004 32/34 C P TANK ROAD MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 23858212 GSTIN :
27ACOPB3307R1Z9
1) STEEL ROUND 32 MM DIA FOR MANUFACTURING OF PT NO F0928415 B[90]()
Specification : STEEL ROUND 32 MM DIA SPECN 16 MN CR5
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HR SHEET 4 MM X 1250 X 2500[90]()
Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) TIN BRONZE INGOTS TO SPECIFICATION IS:306-1983[07]()
Specification : TIN BRONZE INGOTS TO SPECIFICATION
IS:306-1983
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) TIN BRONZE INGOTS NON MAGNETIC IS 306 1983[07]()
Specification : TIN BRONZE INGOTS-NON MAGNETIC,IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.).NOTE:NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) STEEL FLAT 10MM X 50MM STEEL GDE 3 OF IS 4072 1975[01]()
Specification : STEEL FLAT 10MM X 50MM ( 3/8" X 2") STEEL, GDE 3 OF IS:4072-1975
R
Nonestab
2) SPRING STEEL WIRE 18 SWG IS 4454[01]()
Specification : SPRING STEEL WIRE 18.SWG,IS-4454
R
Nonestab
3) SPRING STEEL STRIP IS 2507 1975 80C6 GDE 6[01]()
Specification : SPRING STEEL STRIP 0.5MM X 52MM IS-2507-1975/ 80C6 (GDE- 6)
R
Nonestab
4) CARBON MANGANESE STEEL ROD AS PER SPECN IS 4431 25 C 12 S 14[02]()
Specification : CARBON MANGANESE STEEL ROD 60.50 MM DIA AS PER SPECN. IS-4431 25 C 12 S-14
R
Nonestab
5) CHROMIUM NICKEL STEEL ROD AS PER SPECIFICATION BS 970 EN 24[03]()
Specification : CHROMIUM NICKEL STEEL ROD 1-5/8" DIA. AS PER SPECIFICATION BS-970/EN-24.
R
Nonestab
6) ALUMINIUM ALLOY FLAT 35 MM X 100MM 24534 W OF IS 734 1975[06]()
Specification : ALUMINIUM ALLOY FLAT 35 MM X 100MM 24534 W OF IS:734-1975
R
Nonestab
7) ALUMINIUM ALLOY TUBE 56MM X45MM BORE TO SPECIFICATION IS 738 1994 64430 T6[06]()
8) COPPER ROD TO SPECIFICATION IS 613 1984 HB[07]()
Specification : COPPER ROD 1/4" DIA TO SPECIFICATION IS-613-1984 ,HB
R
Nonestab
9) ALUMINUM BRONZE NON MAGNETIC ROD 16 MM DIA IS 10569 1983 CUAL10FE 3M[07]()
Specification : ALUMINUM BRONZE (NON-MAGNETIC) ROD 16.00MM DIA IS:10569-1983 CUAL10FE 3M
R
Nonestab
10) BRASS TUBE 45MM BORE TO SPECN IS 407 1981 CUZN 30 AS[07]()
Specification : BRASS TUBE 45MM(1-3/4")O/D X 32MM(1-1/4") BORE TO SPECN.IS-407/1981 CUZN 30 AS
R
Nonestab
11) PHOSPHORBRONZ EXTRUDED AND DRAWN 70 MM DIA ROD TO SPECN IS 7811 1985[07]()
Specification : PHOSPHORBRONZ EXTRUDED AND DRAWN. 70.MM (2-3/4") DIA ROD TO SPECN. IS.7811/1985
R
Nonestab
12) TIN BRONZE INGOTS NON MAGNETIC IS 306 1983[07]()
Specification : TIN BRONZE INGOTS - NON MAGNETIC, IS:306-1983(FE CONTENT RESTRICTED TO 0.03% MAX.) NOTE: NON-MAGNETIC PROPERTY WILL BE CHECKED BY MAGNETIC NEEDLE AT THE DISTANCE 1.00MM FROM SUBJECT ITEM.
R
Nonestab
13) N M GUN METAL ROD 38 MM DIA TIN BRONZE IS 306 1983[07]()
Specification : N.M GUN METAL ROD 38 MM DIA TIN BRONZE IS:306-1983 NOTE= IRON CONTS.SHOULD NOT BE MORE THAN 0.05%
R
Nonestab
14) P BRONZE ROD 35 MM DIA IS 7811 1985[07]()
Specification : P.BRONZE ROD 35 MM DIA. IS:7811-1985
R
Nonestab
15) ALUMINIUM ALLOY SHEET SPEC IS 737 SIC H SUPERSEDED BY IS 737 2008 19000 H X 8 SIZE 4 FEET X 8 FEET[06]()
Specification : ALUMINIUM ALLOY SHEET 1.25 MM THICK SPEC. IS-737/ SIC-H SUPERSEDED BY IS:737-2008, 19000, H X 8. SIZE:4 FEET X 8 FEET NOTE: SHEET SHOULD BE PERFECTLY FLAT, FREE FROM SURFACE DEFECTS/SCRATCHES & WITH INTERLEAF PACKING TO AVOID SCRATCHES IN
R
Nonestab
16) MILD STEEL SHEET 3 MM THICK SIZE 8X4 AS PER SPECN IS 1079 GDE 42 1079[01]()
Specification : MILD STEEL SHEET 3.00 MM THICK SIZE 8X4 AS PER SPECN.IS-1079, GDE-42 -1079
R
Nonestab
17) ALUMINIUM ALLOY ROD 6 MM DIA TO SPCN IS 733 1983 HE 15WP[06]()
Specification : ALUMINIUM ALLOY ROD 6 MM DIA TO SPCN. IS-733/1983, HE-15WP
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)[02]()
Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 .
R
Nonestab
2) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)[01]()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Nonestab
3) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]()
Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT
R
Nonestab
4) BRASS STRIP 127X0 4MM IS410 ZN30 O 0712590159[07]()
Specification : BRASS STRIP 127+/-0.5 MM WIDE X 0.4+/- 0.025MM THICK IN COILS OF 3 MTR LENGTH MIN. I/D OF COIL BE 75 MM SPECN:IS-410-1977 (Reaffirmed 2006) (THIRD REVISION) WITH AMENDMENT NO.1APRIL-1981, CU ZN 30 CONDITION O (ANNEALED)
Specification : BRASS STRIP 28 +/-0.2 MM WIDE X 0.5+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BS-2870-1980,DESIG.CZ102,1/2H.HARDNESS 100-115 VPN.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS BOWINESS (MAX) 2MM/MTR.COIL WT.35-40KG,ID WITH NYLON RING30
Specification : BRASS STRIP 14.5+/-0.5MM WIDE X 0.69 -0.02MM THICK TO SPECN.BS-2870 CZ-106 1/4 HARD. MATERIAL TO BE SUPPLIED IN COILS OF CONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 TO 15KGS WITH INSIDE DIA OF COIL 150MM(MAX.) HARDNESS HV 75 TO
R
Nonestab
7) BRASS ROD 23 MM BS 2872 CZ 128 LF 0711900023[07]()
Specification : BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.
R
Nonestab
8) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
R
Nonestab
10) BRASS STRIP 132X0 4MM IS410 ZN30 O LF 0712590132[07]()
Specification : BRASS STRIP 132+/- 0.5 MM WIDE X 0.4 +/-0.025MM THICK TO SPECN.IS 410-1977 (REAFFIRMED 2006) (THIRD REVISION) WITHAMENDMENT NO.1 APRIL 1981 Cu Zn 30 CONDITION ANNEALED INCOIL. WEIGHT OF COIL NOT THAN 30 KG. I/D MINIMUM 100 MM.
R
Nonestab
11) BRASS STRIP 31 75X0 558MM LF 0710760997[07]()
Specification : BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a).
R
Nonestab
12) BRASS STRIP 25 4X0 63 MM LF 0717560949[07]()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
R
Nonestab
13) COPPER STRIP 15X0 26MM LF 0700661042[07]()
Specification : COPPER STRIP 15+0.50MM WIDE X 0.26+/-0.02 MM THICK IN COILS OF RANDOM LENGTH OF 2 TO 3 METERS SPECN:BS-2870-1980 C-106CONDITION HALF HARD.SUPPLY OF STRIPS IN COILS OF CONTINIOUSLENTH IS ALSO ACCECPTABLE HOWEVER WEIGHT OF EACH COIL SHOULDN
R
Nonestab
14) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
R
Nonestab
15) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
16) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
Specification : BRASS STRIP 24+/-0.20 MM WIDE X 0.70+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN:JSS-9535-02-2008(REV.NO.3)HARDNESS 75-90HV.MAT.MUST BE HOMOGENEOUS,FREE FROM BURRS,BOWINESS (MAX) 2MM/MTR.COIL WT 35-40KG,ID WITH NYLON RING300MM MIN
Specification : BRASS STRIP 48 +/-0.40mm WIDE X 1.1 +/-0.02mm THICK IN COLD ROLLED CONDITION LENGTH 3 METRES IN COIL MIN SPECN : BS-2870 CZ-108, BRINELL HARDNESS : 80 - 120
R
Nonestab
19) STEEL ROD 3MM DIA BS:970-EN-7A (0133500003)[01]()
Specification : STEEL ROD 3.00(+0.10/-0.00) MM DIA TO SPECN:-BS-970-EN-7A COLD DRAWN WITH HARDNESS 140 HB (min) OR BS-970 080A20 CDWITH HARDNESS 140HB(min) WITH ANNEALED CONDITION IN STRAIGTH LENGTH OF ROD 2.0 TO 2.5 MTRS.((QAP ENCLOSED).
R
Nonestab
20) STEEL ROD 3.125MM IS:4431 14C14S14 (0112001004)[01]()
Specification : STEEL ROD 3.125+/-0.05MM DIA IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS TO SPECN.IS:4431-1978 REAFFIRMED 2004 GRADE 14C14S14 INCOLD DRAWN CONDITION.
R
Nonestab
21) STEEL ROD 3.67 MM BS-970 080 M50 S' (0114003306)[01]()
Specification : STEEL ROD 3.67(+0.10/-0.00) MM DIA IN THE LENGTH OF 2.00 MTRTO SPECN:BS-970-(PT-I)-1983 GRADE 080 M-50 IN 'S' CONDITION.(QAP ENCLOSED).
R
Nonestab
22) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)[01]()
Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18.
R
Nonestab
23) STEEL ROD 7 MM IS-1875 GRD.20C8 (0101003008)[01]()
Specification : STEEL ROD 7(+0.025,-0.075)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN.IS:1875-1992 (REAFFIRMED-2004)(FIFTH -REVISION)AMENDMENT NO.1 JAN.1993 AND AMENDMENT NO.2 NOV.1994GRADE 20C8.
R
Nonestab
24) WIRE GI 0.90MM/20SWG IS280 HARD (0133013091)[01]()
Specification : WIRE IRON GALVANISED (20 SWG) 0.90 MM TO SPECN.IS 280-1978 (REAFFIRMED-1997) (THIRD REV.)WITH AMENDMENT NO.1 JULY 1984& AMENDMENT NO.2 APRIL 2002 WITH UTS-550-825 MPa-MAX (HARDCONDITION)
R
Nonestab
25) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)[01]()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s
R
Nonestab
26) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)[01]()
Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
R
Nonestab
28) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Nonestab
29) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Nonestab
30) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Nonestab
31) MS ROD 64MM IS-1570 GR.25C4 (0133005064)[01]()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Nonestab
32) BRASS ROD 11 MM BS 2874 CZ122 H LF 0712200012[07]()
Specification : BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H
R
Nonestab
33) BRASS ROD 4MM BSEN12166 CUZN35PB2 LF 0717501004[07]()
Specification : BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN
R
Nonestab
34) BRASS ROD 14 MM BS 2874 CZ124 LF 0711900014[07]()
Specification : BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).
R
Nonestab
35) BRASS ROD 4MM BSEN12166 CUZN39PB2 LF 0717501005[07]()
Specification : BRASS ROD 4MM BSEN12166 CUZN39PB2
R
Nonestab
36) BRASS ROD 8 5 MM IS 4170 CU ZN 40 LF 0711906010[07]()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Nonestab
37) BRASS ROD 6 35MM IS 319 GRD 1 HB LF 0711904006[07]()
Specification : BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.
R
Nonestab
38) BRASS ROD 9 5MM OD IS 319 89 GR 2 LF 0712100010[07]()
Specification : BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".
R
Nonestab
39) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008[07]()
Specification : BRASS ROD 8MM BS2874 CZ122 'M'
R
Nonestab
40) BRASS ROD 17MM BS2874 CZ121 PB3 LF 0712100933[07]()
Specification : COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWN
R
Nonestab
42) COPPER TUBE 35X2 5MM W T JSS 4710 1 lf 0707255389[07]()
Specification : COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.
R
Nonestab
43) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
Specification : BRASS STRIP 75 +/_0.64 MM WIDE X 2.92 +/_0.06 MM THICK IN RANDOM LENGTH OF 1 METER AND ABOVE TO SPECN:JSS-9535-02-2008(REVISION NO.3) HARDNESS 115-130 VPN.
Specification : BRASS STRIP 28.0+/-0.5 X 0.57+/-0.02 MM THICK TO SPECN. JSS-9535-02-2008(REVISION NO.3) HARDNESS 135-155 HV IN THEFORM OF COIL OF 60MM INT.DIA.
Specification : BRASS STRIP 70+/-0.8 MM WIDE x 2.29+/-0.05 MMTHICK IN LENGTHOF 3 METERS IN COILS TO SPECN.JSS-9535-02-2008 REVISON NO.3IN ANNEALED COND.
Specification : BRASS STRIP 60.32 + 0.50 MM WIDE X 0.315 +/- 0.0254 MM THICK ANNEALED HARDNESS 78 VPN MARK TO SPECN:IS-410-1977,CuZn 30CONDITION (a)(REAFFIRMED 2006)(THIRD REVISION)WITH AMENDMENT NO.1 APRIL 1981.
R
Nonestab
54) COPPER STRIP 31 75X1 448MM IS 3167 LF 0717160907[07]()
Specification : COPPER ALLOY STRIP 31.75 +/ -0.50 MM WIDE X 1.448+/- 0.025MMTHICK IN LENGTH OF 3 METERS IN COILS TO SPECN.IS -3167-1982(FIRST REVISION) REAFFIRMED DEC-98.HARDNESS 55-75 HV.
Specification : BRASS STRIP SIZE 95 MM + 2.0 MM X3.9 MM -0.04 MM THICK TO SPECN-JSS 9535-02-2008 (REVISION NO.3) HARDNESS 65 TO 75VPN.GRAIN SIZE 0.035 TO 0.045 MM IN LENGTH OF 3 MTR MINIMUM.
Specification : BRASS STRIP 56+/-0.50 MM WIDE x 1.59 +/-0.05 MM THICK IN ST.LENGTH OF 3 MTRS. MIN. TO SPECN:-JSS-9535-02:2008 (REVISIONNO.3) TYPE 'A' ANNEALED CONDITION HARDNESS 65-75 VPN.
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200[07]()
Specification :
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) STEEL TUBE TO IS 36012006 OD 168 MM X 8 MM THICK X 980 MM LENG[01]()
Specification : as per spec
R
Nonestab
2) OFE COPPER ROD AS PER EN 13604 CW009A CONDITION D SIZE 50 MM DIA[00]()
Specification : OFE COPPER ROD AS PER EN 13604-CW009A CONDITION D SIZE 50 MM DIA
R
Nonestab
3) OFE COPPER ROD AS PER SPECIFICATION ASTM B 170 GRADE I SIZE 45 MM DIA[00]()
Specification : OFE COPPER ROD AS PER SPECIFICATION ASTM B 170 GRADE I SIZE 45 MM DIA
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) STEEL BAR CARBON[01]()
Specification : STEEL BAR CARBON COLD FIN 1137 (LEADED) SPECN ASTM A 108 OR ST. BAR HOT ROLLED ALLOY GR. 4037 ASTM A322 WITH MIN. ROCKWELL HARD. RHC 35 -45 OR BS970 (LATEST ISSUE) PT1 1983 GR. 605 M36 IN V COND WITH RH 35-45 OR IS 4431 (LATEST ISSUE) DES
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)[01]()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Nonestab
2) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
3) ALU ALLOY ROD 6MM IS 733 GRD 24345 LF 0611515550[06]()
Specification : ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa Mi
Specification : ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
R
Nonestab
6) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Nonestab
7) MS ROD 64MM IS-1570 GR.25C4 (0133005064)[01]()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Nonestab
8) BRASS ROD 8 5 MM IS 4170 CU ZN 40 LF 0711906010[07]()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Nonestab
9) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029[07]()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Nonestab
10) ALU ALLOY ROD 8 MM IS 733 24345 W LF 0611503008[06]()
Specification : ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.
R
Nonestab
11) ALU ALLOY ROD 39 MM IS 733 24345 W LF 0611505039[06]()
Specification : ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".
Specification : COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.
R
Nonestab
13) ALU ALLOY ROD 17 MM IS 733 GR 24345 LF 0611505017[06]()
Specification : ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLI
R
Nonestab
14) ALU ALLOY ROD 60MM IS733 GR24345 W LF 0611505060[06]()
Specification : ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.
Specification : COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWN
R
Nonestab
16) ALU ALLOY ROD 60MM BS1474 2014A T 6 LF 0611509060[06]()
Specification : ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.
R
Nonestab
17) ALU STRIP 12 14X0 30MM BS1470 2014A LF 0611563904[06]()
Specification : ALUMINIUM ALLOY STRIP 12/14+/-0.50MM WIDE X0.30+/-0.02 MM THICK TO SPECN.BS:1470 -1987,DESIGN.2014A,TEMPER 'T4'
R
Nonestab
18) ALU FOIL 510X.10MM IS737 19000 [06]()
Specification : ALUMINIUM FOIL 510+/-0.50 MM WIDE x 0.10+/-0.01 MM THICK IN COIL OF 10 MTRS LENGTH TO SPECN:-IS-737-2008 (REVISION NO.4)R3 GR 19000 "0"
R
Nonestab
19) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
R
Nonestab
20) MS PLATE 1MX1MX20MM SPECN.IS:226 (0133021021)[01]()
Specification : MILD STEEL PLATE SIZE 1M X 1M X 20MM THICK TO SPECN.IS:226
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030121 BOLT M16 X 2P X 50 MM (SOCKET HEAD)[01]()
Specification : BOLT M16 X 2P X 50 MM (SOCKET HEAD)
C
Nonestab
2) 0145061109 STRIP ST.COLD ROL 0.5MM THX190 MM W[01]()
Specification : SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM.
R
Nonestab
6) 0145060115 STRIP STEEL[01]()
Specification : IS-1079-1994
R
Nonestab
7) 0133030114 MS PLATE SIZE 6MM[01]()
Specification : IS 2062-1994
R
Nonestab
8) 0133030109 MS PLATE SIZE 25MM[01]()
Specification : IS 2062-1994
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) 65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543[00]()
Specification : 65 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KHGSA /GRADE 40 KH (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 31-37 HRC
R
Estab
2) 70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050[00]()
Specification : 70 MM DIA STEEL ROD TO SPECIFICATION GOST 1050-88, GRADE 10 / GRADE 35 / GRADE 45 (OR) IS 1570 (PT 2) - 1979, GR 10C4 IN STRAIGHT LENGTH OF 1.5 MTRS TO 2.5 MTRS
R
Estab
3) 90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543[00]()
Specification : 90 MM DIA STEEL ROD TO SPECIFICATION GOST 4543-71, GRADE 30KH GSA (OR) IS 5517-93, GRADE 31NI10CR3MO6 IN STRAIGHT LENGTH OF 1.0 MTR TO 2.5 MTRS. HARDNESS OF THE MATERIAL SHALL BE 34-40.5 HRC
R
Estab
4) GROUND STEEL ROD DIA 10 0 POINT 05MM TO SPECIFICATION GOST 7417 75 10 GOST 1051 73 OR IS1570 GRADE 10C4 IN STRAOGHT LENGTH OF 1 5MTR TO MTRS[00]()
Specification : GROUND STEEL ROD DIA 10 =/-0.05MM TO SPECIFICATION GOST 7417-75/ 10 GOST 1051-73 OR IS1570, GRADE 10C4 IN STRAOGHT LENGTH OF 1.5MTR TO MTRS.
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
R
Nonestab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) P.B ROUND 100 MM[70]()
Specification : AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0720300095 PB ROUND 95MM DIA STD LENGTH TOM SPECIFICATION IS 7811 1985[70]()
Specification : 0720300095 P.B.ROUND 95MM DIA STD.LENGTH TOM SPECN: IS: 7811-1985.
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) CON
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) CON
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
R
Estab
Category : s
Grade : 3
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) ST. ROUND 38MM DIA 380MM LONG[03]()
Specification : STEEL ROUND 38 MM DIA IS 5517-1978.40 CSR BS -970-709-M-40
R
Nonestab
2) STEEL ROD 32MM (-0.5) DIA[03]()
Specification : STEEL ROD 32MM(-0.5) DIA.
R
Nonestab
3) STEEL RD. 42MM DIA FOR P/EXTN[03]()
Specification : STEEL RD. 42MM DIA. FOR P/EXTN
R
Nonestab
4) STEEL ROD 38MM.(+0.5MM - 0MM)DIA LENGTH SIZE 470[01]()
Specification : STEEL ROD 38MM.(+0.5MM - 0MM)DIA. TO SPECN.JSS:9510-06,2000 (REV-3)CODE REF.'B'. OR BS:970 PT-I:1983,GD.708 M40(EN-19A)V.D.,IN HR.,PEELED & ANNEALED COND.(248-HV.MAX.). MAINTAINED TO LENGTH SIZE 470(-1.0)MM.EACH FOR BARREL(CLD.FORGED)TO D
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40[03]()
Specification : STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40"T"(EN-19A) V.D. IN HR PEELED & ANNEALED COND (240 HV MAX) MAINTAINED S&P COMBINED= .022%MAX.(%S-01MAX & %P-015 MAX.) TO LENGTH SIZE-490 MM (-1.0MM) FOR BARREL
R
Nonestab
2) STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)[03]()
Specification : STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)
R
Nonestab
3) STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.[03]()
Specification : STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.
R
Nonestab
4) STEEL ROD 38mm (+0.5MM-0MM) DIA TO SPECN.JSS:9510-06,2000 (REV-3) CODE REF. [03]()
Specification : STEEL ROD 38mm (+0.5MM-0MM) DIA TO SPECN.JSS:9510-06,2000 (REV-3) CODE REF. "B"BS:970 PT-I:1983, GD. 708 M40(EN-19A) V.D,
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
Specification : BRASS TUBING 7.11 +/-0.1 MM I/D X 7.93+/-0.076 MM O/D IN RANDUM LENGTH OF 1 MTR. MIN. EXTRUTED AND DRAWN CONDITIONSPECN: BS:2871 PT-2 OF 1972 CZ-126.
R
Nonestab
2) ALU ALLOY ROD 6 50MM IS 733 24345WP LF 0611501006
Description : ALU ALLOY ROD 6 50MM IS 733 24345WP LF 0611501006()
Specification : ALUMINIUM ALLOY ROD 6.50+/-0.05MM DIA IN ST.LENGTH OF 2.5 TO3 MTRS TO SPECN.IS:733-1983 (THIRD REVISION) REAFFIRMED 2006DESG.24345 IN WP CONDITION WITH MECH.PROPERTIES Rm-40Kgf/mm2(MIN), Rp 0.2-28 Kgf/mm2(MIN) A5-10 MIN.
R
Nonestab
3) ALU ALLOY ROD 3 5MM IS 739 GR 64430 LF 0611503004
Description : ALU ALLOY ROD 3 5MM IS 739 GR 64430 LF 0611503004()
Specification : ALUMINUM ALLOY ROD 3.5 MM (+0.1MM/0.0MM) DIA IN STRAIGHT LENGTH OF 1.8 TO 2.0 METRE TO SPECN. IS-739-1992 ( THIRD -REVISION ) DESIGNATION 64430 CONDITION "WP" OR IS-739-1992( THIRD REVISION ) DESIGNATION 24345 CONDITION "W".
R
Nonestab
4) ALU ALLOY ROD 8 MM IS 733 24345 W LF 0611503008
Description : ALU ALLOY ROD 8 MM IS 733 24345 W LF 0611503008()
Specification : ALUMINIUM ALLOY ROD 8.0 MM(+0.025/-0.075MM) DIA IN STRAIGHT LENGTH OF 2.5 TO 3.0 METRE TO SPECN: IS-733-1983 (THIRDREVISION)(REAFFIRMED 2006)GRADE 24345 'W' CONDITION.
Specification : BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.
R
Nonestab
6) ALU ALLOY ROD 14 MM IS 733 24345 WP LF 0619500015
Description : ALU ALLOY ROD 14 MM IS 733 24345 WP LF 0619500015()
Specification : ALUMINIUM ALLOY ROD 14.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGHTLENGTH OF 2.5 TO 3 METRE TO SPECN.IS:733-1983(THIRD REVISIONREAFFIRMED 2006 DESG.24345 IN WP CONDITION.
R
Nonestab
7) ALU ALLOY ROD 26 5MM SPECN 2024 TN LF0611505026
Description : ALU ALLOY ROD 26 5MM SPECN 2024 TN LF0611505026()
Specification : ALUMINIUM ALLOY ROD 26.5(+/-0.10)MM IN LENGTH OF 2.5 TO 3MTRTO SPECN:2024 TN WITH CHEMICAL COMPOSITION:Cu 3.8/4.9,Fe(MAX0.5,Si(MAX)0.5,Mg 1.2/1.8,Mn 0.3/0.9 IMPURITY 0.3 ALL UP TO100% AND ULTIMATE TENSILE STRESS 45.5/50 Kg/mmsq,ELONGATION
R
Nonestab
8) ALU ALLOY ROD 7 MM BS1474 2014A LF 0611500010
Description : ALU ALLOY ROD 7 MM BS1474 2014A LF 0611500010()
Specification : ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa Mi
Specification : COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I
R
Nonestab
10) ALU ALLOY ROD 17 MM IS 733 24345 WP LF 0611505117
Description : ALU ALLOY ROD 17 MM IS 733 24345 WP LF 0611505117()
Specification : ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.
R
Nonestab
11) ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032
Description : ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032()
Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION.
R
Nonestab
12) ALU ALLOY ROD 65MM IS733 GR24345 WP LF 0611503065
Description : ALU ALLOY ROD 65MM IS733 GR24345 WP LF 0611503065()
Specification : ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".
R
Nonestab
13) ALU ALLOY ROD 18 50MM IS 733 24345 LF 0611505019
Description : ALU ALLOY ROD 18 50MM IS 733 24345 LF 0611505019()
Specification : ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIM
R
Nonestab
14) ALU ALLOY ROD 26 50MM IS733 24345WP LF 0611505027
Description : ALU ALLOY ROD 26 50MM IS733 24345WP LF 0611505027()
Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS
R
Nonestab
15) ALU STRIP 25X0 5MM IS 737 19000 O LF 0615360001
Description : ALU STRIP 25X0 5MM IS 737 19000 O LF 0615360001()
Specification : ALUMINIUM STRIP 25+/-0.5 MM WIDE X 0.50(+0.025/ -0.030) MM THICK IN COILS OF 6 METERS LONG TO SPECN:IS-737-1986(REAFFIRMED 1996)(THIRD REVISION) DESIG.19000 CONDITION 'O'
R
Nonestab
16) ALU STRIP 30X0 25MM IS737 19000 O LF 0615460910
Description : ALU STRIP 30X0 25MM IS737 19000 O LF 0615460910()
Specification : ALUMINIUM STRIP 30+/-0.50MM WIDE X 0.25+/-0.025 MM THICK IN ROLLS OF 10 METERS LONG TO SPEEN-IS-737-1986 (Reaffirmed1996)(Third Revision) DESIGN-19000 CONDITION "O".
Specification : ALUMINIUM ALLOY STRIP 15+/-0.2MM WIDE X 0.60 [+0.00/-0.05]MM THICK IN COILS OF RANDOM LENGTH TO SPEEN:-BS-1470:1987 DESIGNATION 2014A (TB) T4 .
Specification : PURE ALUMINIUM STRIP 62+/-0.50 MM WIDE x 0.31+/-0.025 MM THICK TO SPECN:-IS-737:1986(REAFFIRMED 1996)) (3rd REVISION) DESIGNATION -19000 CONDITION "H1" IN COIL. WEIGHT OF EACHCOIL SHOULD BE 15 TO 20 KG BUT NOT EXCEED 30 KGS.
R
Nonestab
19) ALU STRIP 16X0 35MM IS737 19000 O LF 0615461878
Description : ALU STRIP 16X0 35MM IS737 19000 O LF 0615461878()
Specification : PURE ALUMINIUM STRIP 16+/-0.50 MM WIDE X 0.35+0.035-0.025 MMTHICK IN ROLLS OF 6 METER LENGTH TO SPECN.IS-737-2008(FOURTH REVISION ) DESIGNATION 19000 CONDITION 'O'.
R
Nonestab
20) ALU STRIP 55X0 3MM IS 737 19500 LF 0615361047
Description : ALU STRIP 55X0 3MM IS 737 19500 LF 0615361047()
Specification : ALUMINIUM STRIP 55.0 +/-0.5 MM WIDE X 0.3-0.05 MM THICK IN COILS OF 8 METERS SPECN:IS-737-2008(REV.NO.4) GR.19500CONDITION "O" OR BS-1470:1987 GR.1050-A CONDITION "O" WITHUTS OF 60 MPa Min.
R
Nonestab
21) ALU STRIP 12X0 7MM IS 737 19000 H4 LF 0615461197
Description : ALU STRIP 12X0 7MM IS 737 19000 H4 LF 0615461197()
Specification : ALUMINIUM STRIP 12+0.50MM WIDE X 0.70+0.025MM THICK TO SPECN:IS-737 GRADE 19000 COND.H4 OR BS-1470 GRADE 1200COND.H8.
R
Nonestab
22) ALU STRIP 85X0 3MM IS737 19500 O LF 0615361048
Description : ALU STRIP 85X0 3MM IS737 19500 O LF 0615361048()
Specification : ALUMINIUM STRIP 85.0 +/-0.5 MM WIDE X 0.3-0.08 MM THICK IN COILS OF 8 METRES. TO SPECN:IS-737-2008(REV.NO.4) GR.19500CONDTION "O OR BS-1470:1987 GR-1050-A CONDITION "O".MATERIALSHOULD BE SUPPLIED WITH UTS OF 60 MPa MIN
R
Nonestab
23) ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010
Description : ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010()
Specification : ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2017) GRADE 24345 IN "WP" CONDITION.
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
Specification : ALUMINIUM STRIP 25.5+/-0.5 MM WIDE X 0.2 MM THICK TO SPECN:-BS-1470-1987 GR.1200 H16 OR IS-737-1987 (REAFFIRMED-1996)(THIRED REVISION) DESIG 19000 CONDITION H3.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T[70]()
Specification : STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
R
Nonestab
2) 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS: 7811-1985
Specification : 0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
Specification : 0321150125 STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) RIB 3 MM TH ST 42 IS 1079
Description : RIB 3 MM TH ST 42 IS 1079()
Specification : RIB 3 MM TH. ST. 42 IS:1079 Part No. 645-01-7319-1
C
Estab
2) M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
Description : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -20X170X155 FOR LEVER RHS OF MPV HULL
R
Estab
3) M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
Description : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -20X182X125 FOR LEVER LHS OF MPV HULL
R
Estab
4) M S BLOCK 65X173X185
Description : M S BLOCK 65X173X185()
Specification : M. S. BLOCK SIZE- 65X173X185 FOR BRACKET LHS & RHS TO PART NO. 610-03-1202L-1/C & 610-03-1202L-1/A
C
Estab
5) MS PLATE 25 MM THICK
Description : MS PLATE 25 MM THICK()
Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42
R
Estab
6) MS Angle 50x50x5 MM THICK
Description : MS Angle 50x50x5 MM THICK()
Specification : M.S. Angle (50x50x5) MM IN LENGTH OF 5 METR OR UNITS MULTIPLE LENGTH SPECN-IS:2062 GR"A"
R
Estab
7) M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
Description : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL()
Specification : M.S. BLOCK SIZE -90X95X95 FOR LEVER LHS & RHS OF MPV HULL
R
Estab
8) MS ANGLE IRON 50x50x6MM
Description : MS ANGLE IRON 50x50x6MM()
Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062
R
Estab
9) MS PLATE 12 MM IS 2062
Description : MS PLATE 12 MM IS 2062()
Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"
R
Estab
10) MS PLATE 16 MM IS 2062 GR B
Description : MS PLATE 16 MM IS 2062 GR B()
Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG
1) SHEET METAL COMPONENTS FOR SMALL ARMS
Description : SHEET METAL COMPONENTS FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) STEEL SCRAP [04]()
Specification : STEEL SCRAP "B." IN THE FORM OF END PICES OF BILLETS [REJECTED FORGINGS & SHELL (STEEL SCRAP LM IN FORM OF ] [REJECTED SHELLS / FORGING / END PCS OF STEEL BILLETS /] [CUTTING RING OF SHELLS etc.
R
Nonestab
2) FERRO MANAGENESE MEDIUM CARBON (0454373000)[04]()
Specification : FERRO MANGANESE MEDIUM CARBON TO SPECN. IS : 1171-2011 GARDE] [MEDIUM CARBON DESIGNATION 2FeMn 76 SIZE OF LUMP 50 TO 150MM ]| [DULY PACKED IN STEEL DRUM AND DRUM MUST BE CLEARLY MARRKED ] [THE GRADE OF MATERIAL WITH SUPPLIER 'S NAME. ]
R
Nonestab
3) FERRO VANADIUM LOW CARBON (0465073000)[04]()
Specification : FERRO VANADIUM LOW CARBON AS PER IS-1466-1985 GR.FeV 55.THE [EVALUATION OF COST WITH 50% VANADIUM CONTENT AS BASE PLUS PRORATA BASIS.HOWEVER SIZE OF LUMPS:10MM TO 50MM WITH FINES]| [NOT EXCEEDING 10% MAX. ]
R
Estab
4) FERRO CHROME LOW CARBON (0453073000)[04]()
Specification : FERRO CHROMIUM LOW CARBON AS PER IS 1170-1992 GRADE 09 - | [DESIGN. 008 FE CR-64 WITH FOLLOWING CONDITIONS ] [SIZE FROM -10 TO 100 MM PACKING MATERIAL SHOULD BE SUPPLIED ] [IN STEEL DRUM OF 100 KG CAPACITY. EVALUATION ON 60% CR MIN ] [P
R
Nonestab
5) ALUMINIUM PURE INGOT (0615186000)[06]()
Specification : ALUMINIUM PURE INGOT 99% PURE TO SPECIFICATION IS-617-1994 [DESIGNATION 1900 WEIGHT OF INGOT -ONE KG APPROXIMATE
[ OR ]
[PRIMARY ALUMINIUM INGOTS WITH MINIMU
Specification : ST SHEET SIZE:1MM TH IS1570-61C-25
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET SIZE 4.00 MM +0.30 MM X 1000 MM X 2500 MM LENGTH TO SPECIFICATION IS:2062 - 2011 GRADE E 350A[70]()
Specification : SPECIFICATION IS:2062 - 2011 GRADE E 350A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL FLAT SIZE 100 MM X 55 MM X 2.5 METER LENGTH OR ITS MULTIPLE TO IS:5517-1993, DESIGN. 42CR4M02, LRS 100[70]()
Specification : STEEL FLAT SIZE 100 MM X 55 MM X 2.5 METER LENGTH OR ITS MULTIPLE TO IS:5517-1993, DESIGN. 42CR4M02, LRS 100
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42[70]()
Specification : STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0720300095 PB ROUND 95MM DIA STD LENGTH TOM SPECIFICATION IS 7811 1985[70]()
Specification : 0720300095 P.B.ROUND 95MM DIA STD.LENGTH TOM SPECN: IS: 7811-1985.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0725177160 PB HOLLOW BAR 160 MM[90]()
Specification : PB HOLLOW BAR O/S DIA 160 MM X I/D DIA 110 MM TO SPECN. IS:28-1985 GRADE 2
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS 1079 1988 GD ST42 OR IS 513 LATEST COLD ROLLED ANNEALED BEST TYPE D[70]()
Specification : STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS :1079-1988, GD. ST42 OR IS:513 LATEST COLD ROLLED ANNEALED BEST TYPE D
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 3600 MM LENGTH TO SPECN. IS: 513 LATEST ISSUE COLD ROLLED AND ANNEALED BEST SURFACE TYPE D[70]()
Specification : STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 3600 MM LENGTH TO SPECN. IS: 513 LATEST ISSUE COLD ROLLED AND ANNEALED BEST SURFACE TYPE D
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET SIZE 3 MM THICK X 1000 MM WIDTH X 2500 MM LONG TO SPECN IS 513 1449 BEST SURFACE TYPE D CRA BS 1994 PT I 72 SECTION 2 CS CORE CRA OR IS 1079 1994 ST34 HOT ROLLED AND ANNEALED OR IS 513 LATEST ISSUE COLD ROLLED AND ANNEALED BEST TYPE D[70]()
Specification : SHEET SIZE 3 MM THICK X 1000 MM WIDTH X 2500 MM LONG TO SPECN IS: 513-1994 BEST SURFACE TYPE 'D' (CRA) BS:1449 PT-I-72, SECTION 2 CS CORE (CRA) OR IS:1079-1994 ST34 HOT ROLLED & ANNEALED OR IS:513 LATEST ISSUE COLD ROLLED AND ANNEALED BES
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL SHEET SIZE 1 25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS 513 1994 COLD ROLLED AND ANNEALED TYPE D BEST SURFACE[70]()
Specification : STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS:513-1994 COLD ROLLED AND ANNEALED TYPE 'D' BEST SURFACE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PLATE 8 MM THICK X 1300 TO 1400 MM WIDTH X 2000 MM TO 4000 MM LENGTH TO SPECN STEEL 20X CA TY 14 1 1409 75 OR STEEL SHEET HOTCHKISS BRAND 15CDV6 EX MIDHANI HEAT TREATMENT TO ACHIEVE HARDNESS AS PER HEAT TREATMENT GROUP II KT50 OST 3 1686 80[70]()
Specification : STEEL PLATE 8 MM THICK X 1300 TO 1400 MM WIDTH X 2000 MM TO 4000 MM LENGTH TO SPECN STEEL 20X CA TY 14 1 1409 75 OR STEEL SHEET HOTCHKISS BRAND 15CDV6 EX MIDHANI HEAT TREATMENT TO ACHIEVE HARDNESS AS PER HEAT TREATMENT GROUP II KT50 OST 3
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PLATE 10MM THICK X 1000 X 2500 MM LENGTH OR ITS MULTIPLE TO SPECN IND MATL IS 5986 2011 Gd 205[70]()
Specification : STEEL PLATE 10MM THICK X 1000 X 2500 MM LENGTH OR ITS MULTIPLE TO SPECN IND MATL IS 5986 2011 Gd 205
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PLATE 8 MM THICK X 550 MM WIDTH X 1100 MM LENGTH TO SPECN B S 970 PT 1 1983 GD 070 M26 BS 970 PT 1 1983 GD 070 M20 OR IS 2062 1992 GD 410 WA[70]()
Specification : STEEL PLATE 8 MM THICK X 550 MM WIDTH X 1100 MM LENGTH TO SPECN B S 970 PT 1 1983 GD 070 M26 BS 970 PT 1 1983 GD 070 M20 OR IS 2062 1992 GD 410 WA
R
Nonestab
2) STEEL PLATE TO SIZE 8 MM THICK X 1000 X 2500 MM LONG TO SPECN BS 970 PT I 83 DESIGNATION 070M20 OR BS 1449 PTI 1983 GN 4RADE HS 20 SECTION 4[70]()
Specification : STEEL PLATE TO SIZE 8 MM THICK X 1000 X 2500 MM LONG TO SPECN BS 970 PT I 83 DESIGNATION 070M20 OR BS 1449 PTI 1983 GN 4RADE HS 20 SECTION 4
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PLATE STEEL 12 MM THICK STA 60[70]()
Specification : PLATE STEEL 12 MM THICK(X 900MM X 2500MM,IN STD LENGTH & WIDTH ) TO SPECN: STA -60 'A1' CONDITION.NOTE:- AFTER FORMING AND MACHINING PRE WELD HEATTREATMENT AS PER CLAUSE 6.3 OF APPENDIX TO SPEC.STA60
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STAINLESS STEEL TUBE 125X100X830MM[70]()
Specification : STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 -
MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM
LONG TO SPECN: AISI-316.OR,AISI-304.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PLATE 8 MM THICK[70]()
Specification : STEEL PLATE 8 MM THICK X 625(+/-10) MM WIDTH X 1400(+/-10)MM LENGTH TO SPECN: STEEL 20X/CA-TY-14-1-1409-75 OR STEEL SHEET "HOTCHKISS" BRAND 15CDV6(EX MIDHANI). HEAT TREATMENT TO ACHIEVE HARDNESS AS PER HEAT TREATMENT GROUP II-KT50-OST-3-1
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) CUPPER SHEET 5X132MM SQR[70]()
Specification : CUPPER SHEET 5X132MM SQR
R
Nonestab
2) AL BRONZE ROUND BAR 70 MM DIA x 500 MM LONG[90]()
Specification : AL.BRONZE ROUND BAR 70 MM DIA X 500 MM LONG
C
Nonestab
3) AL BRONZE ROUND BAR 75 MM DIA X 500 MM LONG[90]()
Specification : AL BRONZE ROUND BAR 75 MM DIA X 500 MM LONG
1) WELD ELECTRODE FOR 125 MM HEAD L F NO 1789950443[17]()
Specification : WELDING ELECTRODE FOR 125 MM HEAD EQUIVELANT TO OK-76.18 OF ESAB. SIZE 2.5 MM DIA X 350 MM LENGTH
C
Nonestab
2) WELDING ELECTRODE SIZE 4X450MM L F NO 1785950340[17]()
Specification : WELDING ELECTRODE TO SIZE 4 MM DIA X 450 MM LONG TO CONFORM IS- 814:2004 CODE NO.EB-5426 H2
C
Nonestab
3) WELDING ELECTRODE SIZE 3 POINT 15 MM L F NO 1785950315[17]()
Specification : WELDING ELECTRODE SIZE 3.15MM X 450 MM LONG CONFORMING TO IS : 1395:1982 {CLASSIFICATION E-83 B-M4 UTS- 830 MPA
C
Nonestab
4) ELECTRODE SIA MO 4X350MM L F NO 1789950340[17]()
Specification : COATED METALLIC WELD ELECTRODE OF 18% Cr,8% Ni,6% Mn SIZE 4X 350MM BRANDS:SIA MO OF M/S D&H SECHRON LTD/CRONI 307 MO OF M/S D&H ELECTRODES/METATECH ME 21 SPL STICK ELECTRODE OF M/SMAILAM INDIA LTD/AUSTENITIC STICK ELECTRODE 4 & 5MM DIA "C
C
Nonestab
5) ELECTRODE FOR WELDING L F NO 1789950440[17]()
Specification : ELECTRODE FOR WELDING 4MM X450MM TO AWS: E-8018 G BRAND NAME - SUPERTHERM -NI (SPL) OF M/S D & H SECHERON ELETECH LTD. OR OK 73.O8 OF ESAB INDIA OR TENACITO 55 OF ADVANI ORLIKON LTD. OR SUPER-LH(Ni)SPL OF D&H(I)LTD. OR WA-8018 G OF WELD A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) All size of MMAW welding Electrodes
Description : All size of MMAW welding Electrodes()
Specification : AS PER GCF /DRG/SPECN/IS/BS
P
Estab
2) All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m
Description : All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m()
Specification : As per IS/IRS class A1, A2, A4, B2 & D
P
Estab
Category : p
Grade : 3
Size :
O
3045
PAUL COMPONENTS PRIVATE LIMITED
A-69 VISHAL ENCLAVE NEW DELHI NEW DELHI Delhi
PIN1 : 110027
Phone No. : 9350020981 GSTIN :
06AAACP1456C1ZX
34) THREADED BOSS M10X18MMX18MM
Description : THREADED BOSS M10X18MMX18MM()
Specification : THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8
C
Estab
35) THREADED BOSS M10 18 22
Description : THREADED BOSS M10 18 22()
Specification : THREADED BOSS M10X18X22
C
Estab
36) THREADED BOSS M10 X 20MM OD X 30MM
Description : THREADED BOSS M10 X 20MM OD X 30MM()
Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9
C
Estab
37) THREADED BOSS M12X 1 point 75 X OD 20X60 MM
Description : THREADED BOSS M12X 1 point 75 X OD 20X60 MM()
Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S.
C
Estab
38) THREADED BOSS M12 X 1 point 75 X OD 20 X 20L
Description : THREADED BOSS M12 X 1 point 75 X OD 20 X 20L()
Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8
C
Estab
39) THREADED BOSS M12 X 20MM OD X30MM
Description : THREADED BOSS M12 X 20MM OD X30MM()
Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7
C
Estab
40) THREADED BOSS M6 X 12MM OD X12MM
Description : THREADED BOSS M6 X 12MM OD X12MM()
Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2
C
Estab
41) THREADED BOSS M6 12MM 16MM
Description : THREADED BOSS M6 12MM 16MM()
Specification : THREADED BOSS M6X12MMX16MM
C
Estab
42) THREADED BOSS M8 X 16MM OD X12MM
Description : THREADED BOSS M8 X 16MM OD X12MM()
Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH
C
Estab
43) THREADED BOSS M8 X 16MM OD X25MM
Description : THREADED BOSS M8 X 16MM OD X25MM()
Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH
C
Estab
44) THREADED BOSS M8 X 16MM OD X40MM
Description : THREADED BOSS M8 X 16MM OD X40MM()
Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8
C
Estab
45) TORSION BAR
Description : TORSION BAR()
Specification : TORSION BAR AS PER DRG NO. 765-50-1352./C
C
Estab
46) TORSION BAR 765 58 191
Description : TORSION BAR 765 58 191()
Specification : TORSION BAR DRG NO 765-58-191
C
Estab
Category : p
Grade : 3
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE
Description : PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 2590000061 LABEL II POD CONTAINING PF ROCKET
Description : 2590000061 LABEL II POD CONTAINING PF ROCKET()
Specification : LABEL-II (FOR POD CONTAINING PF ROCKET) TO DRG. NO.8603 00 52 00 00 001 12 PA AND DRG. NO. 8603 00 52 00 00 001 22 PA (FOR DIMENSION PURPOSE)
C
Estab
2) 2590000062 LABEL II POD CONTAINING RHE W H
Description : 2590000062 LABEL II POD CONTAINING RHE W H()
Specification : LABEL-II (FOR POD CONTAINING RHE ROCKET) TO DRG.NO.8603 00 51 00 00 001 12 PA AND DRG.NO.8603 00 51 00 00 001 22 PA (FOR DIMENSION PURPOSE).
C
Estab
Category : p
Grade : 3
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE
Description : PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
1) All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m
Description : All types of welding Electrodes in the sizes dia 3.15 mm, dia 4.0 mm and 5.0 mm length 350 mm & 450m()
Specification : As per IS/IRS class A1, A2, A4, B2 & D
P
Estab
2) Wires for TIG & MIG Welding
Description : Wires for TIG & MIG Welding()
Specification : As per GCF Requirements
P
Estab
3) Nozzels
Description : Nozzels()
Specification : As per GCF Spcn./Drg./Size & requirements
P
Estab
Category : s
Grade : 3
Size :
O
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
Description : PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE()
Specification : 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
P
Estab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
Description : PTFE (TEFLON) THREAD SEAL TAPE EACH OF 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE()
Specification : 10 MTR. LONG X 12 MM 1(ROLL WIDE) SAMSON MAKE
1) M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)
Description : M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)()
Specification : M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)
P
Estab
2) PLASTIC PUTTY FOR MPV
Description : PLASTIC PUTTY FOR MPV()
Specification : PLASTIC PUTTY FOR MPV
P
Estab
3) QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530
Description : QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530()
Specification : QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530
P
Estab
4) Thinner NC Base
Description : Thinner NC Base()
Specification : Thinner NC Base IS 1873-1961
P
Estab
5) Paint RFU Golden Yellow
Description : Paint RFU Golden Yellow()
Specification : As per specification / drg.
P
Estab
6) ACRALKD MATT FINISH QD PAINT
Description : ACRALKD MATT FINISH QD PAINT()
Specification : ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294
Specification : PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM
P
Estab
2) LPTA Thinner
Description : LPTA Thinner()
Specification : QUICK DRYING (Q.D.) THINNER FOR FINISH PAINTS AS PER TELCO STANDARD SS- 7530
P
Estab
3) Paint White
Description : Paint White()
Specification : As per specification / drg
P
Estab
4) Paint Black
Description : Paint Black()
Specification : AS per specification / drg
P
Estab
5) Paint Signal Red Colour 537
Description : Paint Signal Red Colour 537()
Specification : As per specification / drg.
P
Estab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) M S WIRE
Description : M S WIRE()
Specification : M. S. WIRE 4MM DIA IS:280-19781/2 HARD BRIGHT CONDITION
R
Estab
Category : s
Grade : 3
Size :
O
3049
System Engineering Enterprises
6-B/B, 1st Floor, Kalyan Vishranti Bhawan, Station Road Indore M.P.
PIN1 : 452001
Phone No. : 0731-2529228
1) Set of Peneumatic Cylinder & Its accessories as per list-9013198424000SK-MPV-01&02
Description : Set of Peneumatic Cylinder & Its accessories as per list-9013198424000SK-MPV-01&02()
Specification : As per specification/drawings
C
Estab
Category : s
Grade : 3
Size :
S
3050
VIJAY SEALS
INDUSTRIAL ESTATE PO UMAYANALLOOR KOLLAM Kerala
PIN1 : 691589
Phone No. : 2531567 GSTIN :
32AAAFV8046K1Z1
1) AUTO CABLE 1 SQ MM WHITE
Description : AUTO CABLE 1 SQ MM WHITE()
Specification : AUTO CABLE 1.0 SQ. MM. WHITE AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
2) AUTO CABLE 1 SQ MM GREEN RED
Description : AUTO CABLE 1 SQ MM GREEN RED()
Specification : AUTO CABLE 1.00 SQ. MM. GREEN/RED AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
3) AUTO CABLE 1 SQ MM RED
Description : AUTO CABLE 1 SQ MM RED()
Specification : AUTO CABLE 1.00 SQ. MM. RED AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
4) AUTO CABLE 1 SQMM BROWN BLACK
Description : AUTO CABLE 1 SQMM BROWN BLACK()
Specification : AUTO CABLE 1.00 SQ. MM. BROWN/BLACK AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
5) AUTO CABLE TWO AND HALF SQ MM BROWN
Description : AUTO CABLE TWO AND HALF SQ MM BROWN()
Specification : AUTO CABLE 2.5 SQ. MM. BROWN AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551
MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
6) AUTO CABLE BLUE BLACK
Description : AUTO CABLE BLUE BLACK()
Specification : AUTO CABLE BLUE/BLACK 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605, 1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
7) AUTO CABLE BLUE RED
Description : AUTO CABLE BLUE RED()
Specification : AUTO CABLE BLUE/RED 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605, 1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
8) AUTO CABLE GREEN BLACK
Description : AUTO CABLE GREEN BLACK()
Specification : AUTO CABLE GREEN/BLACK 1.0 SQ. MM. FINOLEX AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
9) AUTO CABLE ORANGE YELLOW
Description : AUTO CABLE ORANGE YELLOW()
Specification : AUTO CABLE ORANGE/YELLOW 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994 OR DIN72551
JASCO: FINOLEX/V GUARD MAKE ONLY
C
Estab
10) AUTO CABLE ORANGE WHITE
Description : AUTO CABLE ORANGE WHITE()
Specification : AUTO CABLE ORANGE/WHITE 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:006505,1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
11) AUTO CABLE 1 SQ MM BROWN
Description : AUTO CABLE 1 SQ MM BROWN()
Specification : AUTO CABLE 1.00 SQ. MM. BROWN AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551
MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
12) AUTO CABLE 1 SQ MM YELLOW RED
Description : AUTO CABLE 1 SQ MM YELLOW RED()
Specification : AUTO CABLE 1.00 SQ. MM. YELLOW/RED AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551
(MAT- FINOLEX/V GUARD MAKE ONLY.)
C
Estab
13) AUTO CABLE 1 SQ MM ORANGE GREEN
Description : AUTO CABLE 1 SQ MM ORANGE GREEN()
Specification : AUTO CABLE 1.00 SQ. MM. ORANGE/GREEN AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551
MAT- FINOLEX/V GUARD MAKE ONLY.
C
Estab
14) Heavy Duty Cables
Description : Heavy Duty Cables()
Specification : HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E
1) Dunadhesive 758 dendrite PC 65
Description : Dunadhesive 758 dendrite PC 65()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC- 65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN AS PER TS-25408
P
Estab
2) synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
Description : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998()
Specification : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
P
Estab
3) SLOTTED CHEESE HEAD SCREW M5X35 LENGTH
Description : SLOTTED CHEESE HEAD SCREW M5X35 LENGTH()
Specification : SLOTTED CHEESE HEAD SCREW M5X35 LENGTH DRG.NO. S-1817, S-1819, S-1820 & S-1821 FOE ERA BOX (CONTAINER)
C
Estab
4) Spring Washer B 5 IS 3063
Description : Spring Washer B 5 IS 3063()
Specification : Spring Washer B 5 I.S. 3063
C
Estab
5) Snap Head Rivet 6X30 IS 2155
Description : Snap Head Rivet 6X30 IS 2155()
Specification : Snap Head Rivet 6X30 to IS: 2155
C
Estab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) Wire rope slings- mechanically & hand spliced with diff. end fittings viz:hooks,rings,sockets etc.
Description : Wire rope slings- mechanically & hand spliced with diff. end fittings viz:hooks,rings,sockets etc.()
3) Many of tools & Dies Fixtures
Description : Many of tools & Dies Fixtures()
Specification : As per GCF Spcn./Drg./Size & requirements
S
Estab
Category : s
Grade : 3
Size :
O
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518
Description : PLAIN NUT M5 IS1364 PART III P 8 GALVD AND YELLOW PASSIVATED L3010518()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC-65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN. AS PER TS- 25408
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
1) Dunadhesive 758 dendrite PC 65
Description : Dunadhesive 758 dendrite PC 65()
Specification : POLYCHLOROPRENE BASE DUNLOP ADHESIVE S-758 OR DENDRITE PC- 65 CAPACITY ALSO TO JOINT RUBBER TO STEEL PACKED IN 5 LTR TIN AS PER TS-25408
P
Estab
2) TOGGLE SWITCH SINGLE POLE
Description : TOGGLE SWITCH SINGLE POLE()
Specification : TOGGLE SWITCH SINGLE POLE DOUBLE THROW, 250 V, 10 AMP, MAKE- UNIQUE/GE
C
Estab
3) synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
Description : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998()
Specification : synthetic adhesive make dunlop of grade S758 oblique fevicol SR998
