Specification : to specification no: HEF/IO/81/2003 DT 20.02.2003
R
Estab
2) HALF CUP 120 MM
Description : HALF CUP 120 MM()
Specification : CIA/AMN/2158PT ISV 1740
C
Estab
Category : p
Grade : 2
Size :
O
1) Ordnance Factory Varangaon
[Deemed Registration]
Name
Specification
Use
Status
1) BANDOLIER 3A
Description : BANDOLIER 3A()
Specification : To Drg. No. ISV 514-A, DC (I) No. 37334-A Dtd. 19-03-2013 and to specn. IA:1078(j) DCI NO. 35199-A DT. 22-10-1991.
Material :- The Bandolier is to be made of drill cotton disruptive pattern (VAT Printed) to Specn. : JSS-8315-08-2011, Rev
E
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC
Description : 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC()
Specification : JSS 9330-01.
C
Estab
2) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A
Description : 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A()
Specification : SPECN.NO. CQA(A) 2804
C
Estab
3) 6584113922 WASHER C TO DRG PT NO ISV 1591
Description : 6584113922 WASHER C TO DRG PT NO ISV 1591()
Specification : JSS 8010-63-1991
C
Estab
4) 6584113923 WASHER D TO DRG PT NO ISV 1592
Description : 6584113923 WASHER D TO DRG PT NO ISV 1592()
Specification : S/A OF TC WITH COVER PT. NO. B1900905 HASH.0 CONSISTING OF (1) X1801622 (2) B-1900113 HC TR. CASE COVER (3)F0936215 HB DOWEL (4) F3756715(Ref -F37403154-HA) (5) L3080511 PL. NUT (6) L4100500 SC. WASHER
C
Estab
2) SPIGOT STEERING KNUCKLE[90]()
Specification : SPIGOT STEERING KNUCKLE PT. NO. X-1804011-D REF DRG NO. X1804011D SHEET 2 OF 2 FOR FORGING DRG.
C
Estab
Category : p
Grade : Grade III
Size :
L
1) Engine Factory Avadi
Name
Specification
Use
Status
1) cylinder head RH and LH Proof or Zero Machined Casting[38] 306-16-22()
Specification : -306-16-22
R
Estab
2) UPPER CRANK CASE Proof or zero machined Casting[38] 3301-16-58()
Specification : 3301-16-58
R
Estab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BASE ROTATING MACH VIEW AS PER DRG NO Y17142A 00 FOR TRAVERSE ASSY OF SRCG[70]()
Specification : BASE ROTATING MACH (VIEW) AS PER DRG. NO. Y17142A - 00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BASE MACH VIEW AS PER DRG NO Y17140A 00 FOR TRAVERSE ASSY OF SRCG[70]()
Specification : BASE.MACH (VIEW) AS PER DRG NO Y17140A - 00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CASING MAIN[7490302202]()
Specification : CASING, MAIN (View) as per DRG No.Y17086A-00 for elevation Assy of SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Engine Factory Avadi
Name
Specification
Use
Status
1) CRANK CASE LOWER[38] TO DRG NO.402-06-43()
CRANK CASE LOWER[38] TO DRG NO.402-06-43Specification : AS PER DRAWING & VQC, QAP
C
Estab
2) CYLINDER BLOCK CRANK CASE[38]()
Specification : CYLINDER BLOCK CRANK CASE TO DRG NO. 20-01-16-10
C
Estab
3) LH RH CYLINDRICAL JACKET PROOF ZERO MACHINED CASTING[38]()
1) SUB ASSY OF TC WITH COVER
Description : SUB ASSY OF TC WITH COVER()
Specification : S/A OF TC WITH COVER PT. NO. B1900905 HASH.0 CONSISTING OF (1) X1801622 (2) B-1900113 HC TR. CASE COVER (3)F0936215 HB DOWEL (4) F3756715(Ref -F37403154-HA) (5) L3080511 PL. NUT (6) L4100500 SC. WASHER
Specification : ALUMINIUM-COPPER MASTER ALLOY AS PER DESIGNATED AA HARDENER H 2148 WITH COPPER 47%-53%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10% IN TOTAL. TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDER ALUMIN
R
Estab
Category : p
Grade : 3
Size :
O
1) Metal and Steel Factory
Name
Specification
Use
Status
1) ZINC BASE ALLOY FOR DIE CASTING TO SPECIFICATION IS:713-1981 GRADE Zn. Al.4 IN NOTCHED INGOT FORM NORMALLY HAVING WEIGHT 05 TO 20 Kg.{ NOTE: FIRM's T.C.FROM NABL ACCREDITED LAB/GOVT .RECOGNISED LAB AS PER SPECN.(SPECIALLY FOR THALLIUM & INDIUM % ) MU[08]()
Specification : ZINC BASE ALLOY FOR DIE CASTING TO SPECIFICATION IS:713-1981 GRADE Zn. Al.4 IN NOTCHED INGOT FORM NORMALLY HAVING WEIGHT 05 TO 20 Kg.{ NOTE: FIRM's T.C.FROM NABL ACCREDITED LAB/GOVT .RECOGNISED LAB AS PER SPECN.(SPECIALLY FOR THALLIUM & I
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Ordnance Factory Medak
Name
Specification
Use
Status
1) ALUMINIUM MANGANESE MASTER ALLOY[16]()
Specification : ALUMINIUM MANGANESE MASTER ALLOY (10% MANGANESE Fe: 0.30 MAX AND ALUM: REMINDER SHAPE & SIZE AS PER IS: 1820-1979 (INGOT WEIGHT: 5KGS.)
R
Estab
2) ALUMINIUM SILICON MASTER ALLOY[01]()
Specification : ALUMINIUM SILICON MASTER ALLOY AS PER THE FOLLOWING CHEMICAL COMPOSITION: Si: 23-27%, Fe: 0.40% MAX, Ca: 0.10% MAX, OTHERS EACH - 0.05% MAX & AL-REMINDER (INGOT TOTALLY FREE OF SLAG, DROSS & OTHER IMPURITY ELEMENTS. EACH INGOT SHOULD BE 2
Specification : ALUMINIUM-CHROMIUM MASTER ALLOY AS PER DESIGNATED AA HARDENE R H 2918 WITH CHROMIUM 5% +/- 0.5%,SI-0.30% MAX,FE-0.30% MAX OTHER TRACE ELEMENTS i.e. Zn,Pb,Sn SHOULD NOT BE EXCEED 0.10 % IN TOTAL.TOTAL IMPURITIES NOT TO EXCEED 0.70% REMINDE
R
Estab
Category : p
Grade : Grade III
Size :
M
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) ALUMINIUM TITANIUM BORON MASTER ALLOY ROD IN COIL FORM 0620173002
Description : ALUMINIUM TITANIUM BORON MASTER ALLOY ROD IN COIL FORM 0620173002()
Specification : AL.-TI. BORON MASTER ALLOY ROD 9.5 MM DIA (COIL FORM) IN RUNNING LENGTH.CHEMICAL COMPOSITION AS PER DESIGNATED "AA" HARDENER H 2252 WITH TITANIUM 4.5% TO 5.5%,BORON 0.8% TO 1.2%,SI-0.20% MAX,FE-0.30% MAX,V-0.20% MAX OTHER TRACE ELEMENTS i
Specification : Oil Micronised Graphite Shell Forging Lubricant as per IS: 14384:1996 (For Heavy Duty Application Under Clause No. 4.3 Table-2); Graphite Content:13 to 15% by Mass Graphite Particle Size: Upto 10 Microns: Minimum 98% Graphite Particle Siz
Specification : Button plastic white 16 mm
Specification no. IS: 1461 1984, Amd-1 Reaffirmed-2008 & IS: 8543 (Part13/section 1) 1977, Reaffirmed-2010
R
Nonestab
2) Button plastic Dark Drab 16 mm[21]()
Specification : Button plastic Dark Drab 16 mm
Specification no. IS: 1461 1984 AMD-1 (Second Revision), Reaffirmed 2008 & Supplementary Schedule No. CQA(GS)/SS/346(b)
R
Nonestab
3) Button Polyester 19 mm OG (OCFAV/Button/002)[21]()
Specification : IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b)
Except that: (i) Material shall be polyester.
(ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002).
(iii) In app.
Specification : IS:1461& Supplementary Scheduled no. CQA(GS)/SS/346(b)
Except shape & design as per drawing plate (Annexure A) Attached shade of the Button should match with the approved basic fabric shade sample held in the custody of OCFS. Feel and Fin
Specification : To Drg. No. ISV 514-A, DC (I) No. 37334-A Dtd. 19-03-2013 and to specn. IA:1078(j) DCI NO. 35199-A DT. 22-10-1991.
Material :- The Bandolier is to be made of drill cotton disruptive pattern (VAT Printed) to Specn. : JSS-8315-08-2011, Rev
E
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) WALLET EMPTY DS CAT NO. 3770-060959 FOR 5.56 MM LMG & RIFLE
Description : WALLET EMPTY DS CAT NO. 3770-060959 FOR 5.56 MM LMG & RIFLE()
1) PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY FRONT PART AS PER DRG NO F 627
Description : PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY FRONT PART AS PER DRG NO F 627()
Specification : AS PER DRAWING
R
Estab
2) PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY REAR PART AS PER DRG NO F 628
Description : PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY REAR PART AS PER DRG NO F 628()
Specification : AS PER DRAWING
R
Estab
3) STEEL BILLETS AS PER OFAJ DRG NO F 555 A FOR CANISTER FORGING
Description : STEEL BILLETS AS PER OFAJ DRG NO F 555 A FOR CANISTER FORGING()
Specification : AS PER DRAWING
R
Estab
Category : ddp
Grade : 1
Size :
L
1) Ordnance Factory Ambajhari
[Deemed Registration]
Name
Specification
Use
Status
1) STEEL ROUND AS PER GRADE SS B 27 TO SPECN JSS 9510 01 1982 AS ROLLED OR FORGED NORMALIZED
Description : STEEL ROUND AS PER GRADE SS B 27 TO SPECN JSS 9510 01 1982 AS ROLLED OR FORGED NORMALIZED()
Specification : SPECN JSS 9510 01 1982
R
Estab
2) MANUFACTURE AND SUPPLY OF PROOF SHOT 155MM 77B AS PER OFAJ DRG NO SM 959A SCOPE APPLICABLE TERMS AND CONDITIONS ARE AS PER ANNEXURE
Description : MANUFACTURE AND SUPPLY OF PROOF SHOT 155MM 77B AS PER OFAJ DRG NO SM 959A SCOPE APPLICABLE TERMS AND CONDITIONS ARE AS PER ANNEXURE()
Specification : AS PER ANNEXURE
R
Estab
3) PARTED STEEL BILLET TO OFAJ DRG NO F 536A AND SPECIFICATION AS PER OFAJ SPECN NO F 537A
Description : PARTED STEEL BILLET TO OFAJ DRG NO F 536A AND SPECIFICATION AS PER OFAJ SPECN NO F 537A()
Specification : AS PER OFAJ SPECN.NO.F-537A
R
Estab
4) PARTED STEEL BILLET TO OFAJ DRG NO F 619 AND SPECIFICATION AS PER OFAJ SPECN NO F 531 B
Description : PARTED STEEL BILLET TO OFAJ DRG NO F 619 AND SPECIFICATION AS PER OFAJ SPECN NO F 531 B()
Specification : S PER OFAJ SPECN.NO.F-531 B
R
Estab
5) PARTED STEEL BILLET AS PER OFAJ DRG NO F 561 D AND SPECNAS PER OFAJ F 444 D LATEST ISSUE FOR SHELL 107 HE
Description : PARTED STEEL BILLET AS PER OFAJ DRG NO F 561 D AND SPECNAS PER OFAJ F 444 D LATEST ISSUE FOR SHELL 107 HE()
Specification : SPECN.AS PER OFAJ F-444 D
R
Estab
6) PARTED STEEL BILLET FOR 105 MM IFG SHELL TO OFAJ DRG.NO. F-472 D.OTHER PARAMETERSARE TO BE GOVERNED BY OFAJ DRG. SPECN. NO. F-330 K LATEST ISSUE
Description : PARTED STEEL BILLET FOR 105 MM IFG SHELL TO OFAJ DRG.NO. F-472 D.OTHER PARAMETERSARE TO BE GOVERNED BY OFAJ DRG. SPECN. NO. F-330 K LATEST ISSUE()
Specification : as per DRG. SPECN. NO. F-330 K
R
Estab
7) PARTED STEEL BILLET FOR 84 MM HEDP AS PER OFAJ DRG NO F 630
Description : PARTED STEEL BILLET FOR 84 MM HEDP AS PER OFAJ DRG NO F 630()
Specification : AS PER REQUIREMENTS
R
Estab
8) PARTED STEEL BILLET FOR 155 MM IMI SHELL AS PER OFAJ DRG NO F 632
Description : PARTED STEEL BILLET FOR 155 MM IMI SHELL AS PER OFAJ DRG NO F 632()
Specification : PARTED STEEL BILLET FOR 155 MM I.M.I. SHELL AS PER OFAJ DRG NO. F-632
R
Estab
9) PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL
Description : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL()
Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL
R
Estab
10) PARTED STEEL BILLET TO OFAJ DRG NO F 602 B AND SPECIFICATION AS PER OFAJ SPECN NO F329M
Description : PARTED STEEL BILLET TO OFAJ DRG NO F 602 B AND SPECIFICATION AS PER OFAJ SPECN NO F329M()
Specification : AS PER OFAJ SPECN F329M
R
Estab
11) PARTED STEEL BILLET TO OFAJ DRG NO F 603 B AND SPECIFICATION AS PER OFAJ SPECN NO F 329M
Description : PARTED STEEL BILLET TO OFAJ DRG NO F 603 B AND SPECIFICATION AS PER OFAJ SPECN NO F 329M()
Specification : AS PER OFAJ SPECN.NO.F-329M
R
Estab
12) BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES SIZE 32 POINT 50 MINUS 0POINT 1 MM DIA
Description : BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES SIZE 32 POINT 50 MINUS 0POINT 1 MM DIA()
Specification : BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUND BARS TO SPECNBS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES(10% MAX SHORTS DOWN TO 1.5 METRES PERMITTED)SIZE 32.50 - 0.1 MM DIA.
R
Estab
13) HOT ROLLED NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 23 POINT 50
Description : HOT ROLLED NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 23 POINT 50()
Specification : HOT ROLLED, NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN. BS:970-PT.I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3 METRES,SIZE 23.50 -0.052 MM DIA.(10 % MAX.SHORT LENGTH OF 1.5 METRES ALLOWED).
R
Estab
14) NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN BS 970PT I 1983 GRADE 080M40 HAVING GRAIN SIZE 5 TO 8 IZOD IMPACT VALUE 20 POINT 340 NM MIN SIZE 41 MINUS 0 POINT 1 MM DIA
Description : NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN BS 970PT I 1983 GRADE 080M40 HAVING GRAIN SIZE 5 TO 8 IZOD IMPACT VALUE 20 POINT 340 NM MIN SIZE 41 MINUS 0 POINT 1 MM DIA()
Specification : NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970PT-I-1983,GRADE 080M40 HAVING GRAIN SIZE 5 TO 8,IZOD IMPACT VALUE 20.340 NM MIN.IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTSDOWN TO 1.5 TO 2.0 METRES. PERMITTED SIZE:41.00 - 0.1 MM D
R
Estab
15) NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES SIZE 21MINUS 0POINT1MM DIA
Description : NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES SIZE 21MINUS 0POINT1MM DIA()
Specification : NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES,SIZE:21.00 - 0.1MM DIA. (10 % MAX.SHORT LENGTH OF 1.5 METRE ALLOWED.)
R
Estab
16) CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10 PERCENTAGE SHORTS DOWN TO 2 TO 3 METRES SIZE 35 MM DIA
Description : CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10 PERCENTAGE SHORTS DOWN TO 2 TO 3 METRES SIZE 35 MM DIA()
Specification : CARBON STEEL BRIGHT ROUNDS TO SPECN. BS:970 PT.I-1983 GRADE O80M40 CONDITION NORMALISED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METRES SIZE: 35.00 - 0.1 MM DIA.
R
Estab
17) STEEL BAR TO SPECN IS 4431 78 DESIGNATION 14C 14S14 COLD DRAWN IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22
Description : STEEL BAR TO SPECN IS 4431 78 DESIGNATION 14C 14S14 COLD DRAWN IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22()
Specification : STEEL BAR TO SPECN. NO. IS:4431-78 DESIGNATION 14C 14S14 (C/D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22-0.052 MM DIA.
Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Soda Ash Light Technical[10]()
Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Soda Ash Light Technical[10]()
Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) CAUSTIC SODA FOR HMX PLANT[10]()
Specification : CAUSTIC SODA:PURITY= 95.0% MIN, . AND COLOUR= WHITE POWDER FREE FROM FOREIGN MATTER MOISTURE CONTENT= 3.0% MAX AS PER JSS: 0112 REV NO 02, METHOD NO 1(B), REFER LY/39/A/NE/C DT 30.01.2020.PURITY AS PER IS 252-2013 Reaffirmed 2018 Rev 4
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Soda Ash Light Technical[10]()
Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Soda Ash Light Technical[10]()
Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 (Reaffirmed 2020) FOURTH REVISION.
R
Nonestab
2) CAUSTIC SODA FOR HMX PLANT[10]()
Specification : CAUSTIC SODA:PURITY= 95.0% MIN, . AND COLOUR= WHITE POWDER FREE FROM FOREIGN MATTER MOISTURE CONTENT= 3.0% MAX AS PER JSS: 0112 REV NO 02, METHOD NO 1(B), REFER LY/39/A/NE/C DT 30.01.2020.PURITY AS PER IS 252-2013 Reaffirmed 2018 Rev 4
R
Nonestab
Category :
Grade : Grade III
Size :
M
2996
Auto Profiles Limited
Unit 1 C-33 34 35, Phase IV, Adityapur Industrial Area Jamshedpur Jharkhand
PIN1 : 832108
Phone No. : 0657-2201042 GSTIN : 20AABCA3931A1ZP
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
C
Estab
Category : p
Grade : 3
Size :
S
3000
MUMBAI TIMBER SYNDICATE
PLOT NO 23, NEW TIMBER MARKET PUNE MAHARASHTRA
PIN1 : 411042
Phone No. : 02026451799
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
