Specification : JSS 8010-63:2004 FOR FUZE B-429 ASSY.
R
Nonestab
2) 1011318631 PAINT LIGHT GREY MATT FINISH GEN PU[10]()
Specification : IS-168:1993
R
Nonestab
3) 1013401020 APC 219 UNDYED[10]()
Specification : JSS 8010-48 : 2004
R
Nonestab
4) 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992[10]()
Specification : IS-138-1992
R
Nonestab
5) 1011337001 PAINT STENC BLACK SGF IS 138 1992[10]()
Specification : SPECN IS-138-1992
R
Nonestab
6) 1011300007 PALE YELLOW PAINT SPECN IS 5 2004[10]()
Specification : IS-5:2007, ISC NO.356 TO IS: 138
R
Nonestab
7) 1011308001 PAINT BLACK SGF GENERAL PURPOSE[10]()
Specification : IS:168-1993
R
Nonestab
8) 1011307225 PAINT LIGHT BRUNSWICK GREEN SGF[10]()
Specification : IS: 168-1993
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314[10]()
Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE)
R
Nonestab
2) PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE BRUSHING LIGHT BRUNSWICK GREEN ISC 225 IS 168 MF ITEM CODE 1011508225[10]()
Specification : PAINT L BRUNS GREEN ISC 225 IS 168 MF
R
Nonestab
3) paint red signal ISC 357 IS 138 SG ITEM CODE 1011538537[10]()
Specification : paint red signal ISC 357 IS 138 SG
R
Nonestab
4) READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 ITEM CODE 1011538002[10]()
Specification : READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 (3RD REV) (REAFF. 2014) WITH AMENDMENT NO.1 APRIL 2000, AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PAINT RFU BLACK ACID PROOF()
Specification : PAINT RFU BLACK ACID PROOF, TYPE-1 SPRAYING TO SPECN.IND/ME/651(A)DC 2404-ME DT.4.11.81
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) VARNISH OIL STOVING(A.P.C.221)()
Specification : PAINT
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)()
Specification : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PAINT READYMIXED AIR DRYING FOR GENERAL PURPOSE SEMIGLOSSY FINISH SPRAYING BUFF MIDDLE COLOUR TO(ISC-359) OF IS:5:1994(4TH REVISION) AMENDMENT NO.-1 TO IS:168:1993(THIRD REVISION)AS APPLICABLE FOR DEFENCE USE()
Specification : PAINT READYMIXED AIR DRYING FOR GENERAL PURPOSE SEMIGLOSSY FINISH SPRAYING BUFF MIDDLE COLOUR TO(ISC-359) OF IS:5:1994(4TH REVISION) AMENDMENT NO.-1 TO IS:168:1993(THIRD REVISION)AS APPLICABLE FOR DEFENCE USE
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168
Description : 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168()
Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION)
P
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168[10]()
Specification : AS PER IS:168
P
Estab
Category : p
Grade : Grade III
Size :
S
2822
MICRO INDIA ENGINEERING
351, Sr. No. 28/3/1, Ambegaon Khurd,
Near Jambhulwadi Lake, Pune -411 046.
Near Jambhulwadi Lake Pune Maharashtra
PIN1 : 411046
Phone No. : 68014576 GSTIN : 27AALFM4554E1Z6
3) 6192250491 M.F.R.C. FOR RKT 68 MM HE/HC/PRACT.[61]()
Specification : METALLIC FIN RETAINING CAP TO DRG. NO. NAD-8501 (PROV) DATED 07-04-1986 FOR ROCKET 68 MM HE/PRACTICE.
C
Nonestab
4) 6192238852 SPRING PROPLLENT RKT 68MM HE/HC/PRA[61]()
Specification : SPRING PROPELLANT TO DRG.NO. ARDE-1135,DET.NO.4, AL.NO.525 DT. 16-02-1985 FOR ROCKET 68 MM HE/HC/PRACTICE
C
Nonestab
5) 6262010101 SHELL 105MM IFG HE EMPTY[62]()
Specification : SHELL 105MM IFG HE A/L DRAWING PART NO.ISX 46 GE (2-SHEETS) DC NO. 36784-A DATED 20-9-2001
C
Nonestab
6) 6044000146 BOMB 120 MM HE 1A EMPTY BODY.[60]()
Specification : SPECN. NO. 2341
C
Nonestab
7) 6043100700 TAIL UNIT 1A FOR 81MM, ITV-8A[60]()
Specification : SPECN NO. CQA(A) 2308(D)
C
Nonestab
8) 6141156252 HOUSING WITH PIN PT.DRG.NO.IQX85 SA[61]()
Specification : HOUSING WITH PIN
C
Nonestab
9) 6141800106 WASHER SPRING ITX-240 MINE AP 1B DR[61]()
Specification : WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.
C
Nonestab
10) 6121000192 CUP TO PART NO. 2-10 FOR 125MM HEAT[61]()
Specification : CUP TO PART NO. 2-10 FOR 125MM HEAT
C
Nonestab
11) 6121000193 COVER TO PT.NO. 2-11 FOR 125MM HEAT[61]()
Specification : COVER TO PT.NO. 2-11 FOR 125MM HEAT
C
Nonestab
12) 6121000194 CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5[61]()
Specification : CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5
C
Nonestab
13) 6141000210 BODY MINE FOR 1B DIR. WITH ADAPTER.[61]()
Specification : SPECN. IA 1285(B
C
Nonestab
14) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]()
Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL
C
Nonestab
15) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]()
Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM.
C
Nonestab
16) 6330604400 HOLDER DELAY FOR FZ B429[63]()
Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429
C
Nonestab
17) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]()
Specification : IS:2062
C
Nonestab
18) 6330604500 SLEEVE REGULATOR PT 42[63]()
Specification : REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429.
C
Nonestab
19) 6330604970 PLUG REPRESENTING FUZE B429[63]()
Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A.
C
Nonestab
20) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]()
Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008
C
Nonestab
21) 6141701400 CONNECTR NO 3981 FOR MINE AP 1A DIR[61]()
Specification : CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TO DRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM
C
Nonestab
22) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]()
24) 6331451100 SADDLE ASSLY FOR CHARGE 145 MM[63]()
Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
25) 6331451000 SHAPED CHARGE 145 MM EMPTY[63]()
Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV.00 OF 09/2008.
C
Nonestab
26) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB[62]()
Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB)
C
Nonestab
27) 6273200026 OBTURATOR TO DRG NO CQA 155 1140[62]()
Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB).
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6380608100 PRIMER 19B EMPT IQX 71 GE[63]()
Specification : SPECN.NO.CIA 3102
C
Nonestab
2) 6380600100 PRIMER 18 A EMPTY[63]()
Specification : PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY.
C
Nonestab
3) 6410900880 CUP FOR PRIMER GUV-7[64]()
Specification : DRG.NO.3-027321,
C
Nonestab
4) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]()
Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14.
C
Nonestab
5) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC[63]()
Specification : PRIMER ELECTRIC 1A/L EMPTY
C
Nonestab
6) 6419000014 PLUG TO DRG.NO ISX-393 FOR 125MM HE[64]()
Specification : PLUG (PLASTIC)
C
Nonestab
7) 6432100101 STEEL CUP WITH SEAL ARDE 2120 120ARJUN[64]()
Specification : CQA(A)5709
C
Nonestab
8) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]()
9) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]()
Specification : IS:277-92) HEMRL
C
Nonestab
10) 6334100728 STEEL MACHINED WASHER FOR PIN[63]()
Specification : IS 2016
C
Nonestab
11) 6334402000 MS BLOCK FOR PROFING HDC I AND II[63]()
Specification : M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B
C
Nonestab
12) 6334401100 SET A FOR HDC I CONSISTING OF 4 NOS[63]()
Specification : SET`A' CONSISTING OF:A)CASING(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.2 QTY:1 NO,(B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1169 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.NO.HEMRL/SK/1169 DET. NO.9 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER TO DRG.NO.HEMRL
C
Nonestab
13) 6334402200 SET A FOR HDC II CONSISTING OF 5[63]()
Specification : SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/11
C
Nonestab
14) 6334401200 SET B SADDLE ASSY CONSIST 4 HDC I[63]()
Specification : SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 1
C
Nonestab
15) 6334402300 SET B SADDLE ASSY FOR HDC II CON 4[63]()
Specification : SET`B'(SADDLE ASSY) CONSISTING OF: A) SADDLE TO DRG.NO.HEMRL/ SK/1173 DET.NO.14 QTY:1 NO, (B)UPPER LEG(SUB-ASSY) TO DRG.NO. HEMRL/SK/1173 DET.NO.15 QTY:3 NOS, (C)LOWER LEG(SUB-ASSY) TODRG.NO. HEMRL/SK/1173 DET.NO. 18 QTY: 3 NOS, (D) ALLEN
C
Nonestab
16) 6410900380 DEVICE DETONATING DUMMY FOR FZ B15[64]()
Specification : DUMMY DETONATING DEVICE TO DRG. NO. 3-26155
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030123 ERA MOUNTING PLATE ASSY STD[01]()
Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES
C
Nonestab
2) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]()
Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]()
Specification : SPECN.NO. CQA(A) 2804
C
Nonestab
2) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117[65]()
Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL.
C
Nonestab
3) 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM[65]()
Specification : FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION
C
Nonestab
4) 6571747622 BOX TIN FOR STORING DET[65]()
Specification : BOX TIN FOR STORING DETONATORS TO DRG.NO.FQ/II/200
Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013
C
Nonestab
6) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]()
Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A
C
Nonestab
7) 6570016000 BOX H 50 STEEL[65]()
Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987
C
Nonestab
8) 6570850706 BOX B7A "OLIEVE GREEN"[65]()
Specification : SPECN. NO. IA 1169
C
Nonestab
9) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()
Specification : AMN. CONT. BOX P 60 MARK 2/L TO DRG. PART NO. SV 24 A DC NO. 35530- A.
C
Nonestab
22) 6575500000 CYLINDER 239MK5 STEEL TEAR OFF BAND[65]()
Specification : CYLINDER 239 MK 5/L TIN PLATE WITH TEAR OFF BANDS DESIGNER REFERENCE NUMBER D-7(L) 1509/A/326 DC 34595-A PT.NO.SV-55A REQUIRED FOR PACKING OF AMMUNITION ROCKET 68 MM HE.
C
Nonestab
23) 6432420001 LEG ASSY DRG ITX 46 SA[64]()
Specification : LEG ASSEMBLY TO DESIGNER'S REF. NO. ARDE-1521, DRG.PART NO. ITX-46 SA DC NO. 35824-A.
C
Nonestab
24) 6432800002 RING OD73MM ID 60MM TH 6MM TORPEDO[64]()
Specification : IS 2036 FOR MATERIAL GENL SPCN:NA SPEC A-31B
C
Nonestab
25) 6432800004 COPPER CUP TORPEDO I C[64]()
Specification : CUP (MATERIAL- COPPER SHEET) TO DRG. NO. NASK 754/4 (PROV.) FOR ASSEMBLY OF CARTG. TORPEDO IMPULSE.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI[00]()
Specification : "ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.
C
Nonestab
2) ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI[00]()
Specification : "ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
C
Nonestab
3) DIAPHRAGM TO OFAJ DRG NO FS 2467 A[00]()
Specification : "DIAPHRAGM"TO OFAJ DRG.NO.FS-2467 A (FOR FUZE M842 FOR AMMN. 20 MM AMR HEI.)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PLASTIC CONTAINER TO DRG NO FS 2368C FOR 84 MM TPT PROJECTILE[00]()
Specification : DRG NO FS 2368C
C
Nonestab
2) CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NO FS 2956 C[00]()
Specification : CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NOFS2956C(ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION).
C
Nonestab
3) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301047062E DC36160 A DT 31 08 96[00]()
Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) OBTURATOR TO OFAJ DRG NO FS 2458A[00]()
Specification : OBTURATOR TO OFAJ DRG NO. FS-2458A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BODY TO DRG NO IQX 815 FOR FUZE 213 MK 5 M4[00]()
Specification : BODY TO DRG.NO.IQX-815 FOR FUZE 213 MK-5 (M-4)
C
Nonestab
2) HOLDER TO DRG NO IQX 1251 DC34168 A DTD 27 06 87[00]()
Specification : HOLDER TO DRG. NO. IQX 1251 DC34168-A DTD.27.06.87
C
Nonestab
3) DOME TO DRG NO IQX 816 FOR FUZE 213 MK 5 M4[00]()
Specification : DOME TO DRG.NO.IQX-816 FOR FUZE 213 MK-5 (M4)
C
Nonestab
4) SAFETY LUG TO DRG NO IQX 800 DC 36025 A DTD 01 11 1995[00]()
Specification : SAFETY LUG TO DRG NO.IQX 800 DC 36025-A DTD.01.11.1995
C
Nonestab
5) HEAD TO DRG NO IQX 603 and IQX 191 DC 34168 A DTD 27 06 87[00]()
Specification : HEAD TO DRG NO.IQX 603 & IQX 191 DC 34168-A DTD.27.06.87
C
Nonestab
6) HOLDER TO DRG NO QX 208 DC 34752A[00]()
Specification : HOLDER TO DRG NO. QX 208 DC 34752A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) SLIDE SHOE TO OFAJ DRAWING NO FS 3024[00]()
Specification : SLIDE SHOE TO OFAJ DRAWING NO FS-3024
C
Nonestab
2) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301 047062E DC 36160 A DT 31 08 96[00]()
Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ROTOR HOLDER TO OFAJ DRG NO FS 2473 B FOR FUZE M842 AMMN 20 MM AMR HEI[00]()
Specification : "ROTOR HOLDER"TO OFAJ DRG.NO.FS-2473 B FOR FUZE M842 AMMN. 20 MM AMR HEI.
C
Nonestab
2) ROTOR HOLDER TO OFAJ DRG NO FS 2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI[00]()
Specification : "ROTOR HOLDER" TO OFAJ DRG.NO. FS-2484 B FOR FUZE M859 AMMN 20MM AMR SAPHEI
C
Nonestab
3) DIAPHRAGM TO OFAJ DRG NO FS 2467 A[00]()
Specification : "DIAPHRAGM"TO OFAJ DRG.NO.FS-2467 A (FOR FUZE M842 FOR AMMN. 20 MM AMR HEI.)
C
Nonestab
4) CUP TO OFAJ DRG NO FS 2457 A[00]()
Specification : CUP TO OFAJ DRG. NO. FS-2457 A.
C
Nonestab
5) OBTURATOR TO OFAJ DRG NO FS 2458 A[00]()
Specification : OBTURATOR TO OFAJ DRG. NO. FS-2458 A
C
Nonestab
6) COVER OF OBTURATOR TO OFAJ DRG NO FS 2456 A[00]()
Specification : COVER OF OBTURATOR TO OFAJ DRG.NO.FS-2456 A
C
Nonestab
7) PACKING RING TO CQA AMMN DRG NO 3 027321 DET 6 DC NO 36651 A DTD 28 2 2000[00]()
Specification : PACKING RING TO CQA(AMMN.) DRG.NO.3-027321 DET-6 DC NO. 36651-A DTD.28.2.2000.
C
Nonestab
8) CONICAL SHUTTER TO CQA AMMN DRG NO 3027321 DET 2 DC I 35802 A DT 13 994[00]()
9) RING TO CQA AMMN DRG NO 3 027321 DET 25 DC I NO 36050 A DT 5 12 95[00]()
Specification : RING TO CQA(AMMN.) DRG NO. 3-027321 DET-25 DC(I) NO. 36050-A DT. 5-12-95
C
Nonestab
10) CONVERSION OF DIE CAST FIN TO DRAWING NO DC 11 E INTO MACHINED FINS WITHOUT SURFACE TREATMENT TO DRAWING NO FS 2934[00]()
Specification : CONVERSION OF DIE CAST FIN TO DRAWING NO.DC-11 E INTO MACHINED FINS WITHOUT SURFACE TREATMENT TO DRAWING NO.FS-2934.
S
Nonestab
11) CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO FS 2956C ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE SO FIRMS TO INDICATE THE SAME IN THE QUOTATION[00]()
Specification : CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION)
C
Nonestab
12) STRIKER GUIDE TO OFAJ DRG NO FS 2470 C FOR FUZE M842 FOR AMMN 20MM AMR HEI[00]()
Specification : STRIKER GUIDE TO OFAJ DRG.NO.FS-2470 C FOR FUZE M842 FOR AMMN.20MM AMR HEI.
C
Nonestab
13) ROTOR SPIRAL TO OFAJ DRG NO FS 2471 A FOR FUZE M842 FOR AMMN 20MM AMR HEI[00]()
Specification : "ROTOR SPIRAL"TO OFAJ DRG.NO. FS-2471 A (FOR FUZE M842 FOR AMMN .20MM AMR HEI.)
R
Nonestab
14) ROTOR SPIRAL TO OFAJ DRG NO FS 2483 A FOR FUZE M859 AMMN 20MM AMR SAPHEI[00]()
Specification : "ROTOR SPIRAL"TO OFAJ DRG.NO.FS-2483 A FOR FUZE M859 AMMN. 20MM AMR SAPHEI
C
Nonestab
15) MAGAZINE TUBE TO OFAJ DRG NO FS 2475B FOR FUZE M842 FOR AMMN 20MM AMR HEI[00]()
Specification : MAGAZINE TUBE TO OFAJ DRG.NO.FS-2475B FOR FUZE M842 FOR AMMN.20MM AMR HEI.
C
Nonestab
16) MAGAZINE TUBE TO OFAJ DRG NO FS 2487B FOR FUZE M859 FOR AMMN 20MM AMR SAPHEI[00]()
Specification : MAGAZINE TUBE TO OFAJ DRG.NO.FS-2487B FOR FUZE M859 FOR AMMN.20MM AMR SAPHEI.
C
Nonestab
17) SAFETY LOCK TO OFAJ DRG NO FS 2468A FOR FUZE M842 FOR AMMN 20MM AMR HEI[00]()
Specification : SAFETY LOCK TO OFAJ DRG. NO. FS-2468A FOR FUZE M842 FOR AMMN.20MM AMR HEI.
C
Nonestab
18) SAFETY LOCK TO OFAJ DRG NO FS 2479 A FOR FUZE M859 20MM AM R SAPHEI AMMN[00]()
Specification : SAFETY LOCK TO OFAJ DRG.NO. FS-2479 A FOR FUZE M859 20MM AM R SAPHEI AMMN.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ROTOR SPRING TO CQA AMMN DRG NO 3 016919 DET 14 DC I 37284 A DT 6 7 2011 WIDTH OF STEEL STRIP TO BE RESTRICTED TO 3 minus 0 point 15 MM[00]()
Specification : ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTEDTO 3.00 - 0.15 MM)
C
Nonestab
2) CAP TO OFAJ DRG NO FS 1160A[00]()
Specification : CAP TO OFAJ DRG.NO. FS-1160A
C
Nonestab
3) SAFETY DEVICE TO CQA A DRG NO 4 024069 DET 2 DC 35212 A DT 12 11 91[00]()
8) SAFETY LOCK ASSEMBLY TO DRG NO BW 6 042 512 CB DC 34241 A DT 24 09 87[00]()
Specification : SAFETY LOCK ASSEMBLY TO DRG.NO.BW.6.042.512 CB DC-34241-A,DT 24.09.87,CONSISTING OF 4 COMPT.(1)SLIDER TO DRG.NO.BW8.264. 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.635 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.6
C
Nonestab
9) DELAY TRAIN TO OFAJ DRG NO FS 2496B OR CQA A DRG NO BW 8 635 111 DC NO 37271 A DT 08 11 10[00]()
Specification : DELAY TRAIN TO OFAJ DRG. NO. FS-2496B OR CQA (A) DRG NO. BW 8.635.111 DC NO. 37271-A DT. 08-11-10
C
Nonestab
10) WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 2010[00]()
Specification : WASHER TO CQA(AMMN.) DRG. NO. BW 9.440.010 DC 37271-A DT. 08.11.2010.
C
Nonestab
11) CAP II 1 TO DRG NO DET 1 DC 37271 A DT 08 11 10[00]()
Specification : CAP II-1 TO DRG. NO. CQA(A)/AMN/2860 DET-1 DC 37271-A DT.08-11-10
C
Nonestab
12) GASKET ASSY TO CQA AMMN DRG NO BW 6 472 004 CB DC 35352 A DT 23 7 92[00]()
1) DEPTH CHARGE MK II MOD 3 EMPTY LF 9911353534[99]()
Specification : DEPTH CHARGE MK-11 MOD-3 EMPTY TO DRG NO NAD/7502/1 R/NO 2 DT 19/12/90 UNDER NOTE 5 SPECN AMENDED ARD-2165 SPECN:NA-SPECIFICATION U-2D
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PRE CUP COMPONENT ANNEALED BLANK FOR 125 MM SCCC BASE TO OFAJ DRG NO CC 471 D[00]()
Specification : PRE CUP COMPONENT (ANNEALED BLANK) FOR 125 MM SCCC (BASE) TO OFAJ DRG. NO. CC-471 D.
C
Nonestab
2) MOUTH PROTECTOR TO DRG NO CC 509 A FOR 125 MM SCCC METALIC BASE[00]()
Specification : MOUTH PROTECTOR TO DRG. NO. CC-509 A (FOR 125 MM SCCC METALIC BASE)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER (FINISH) FOR PISTOL AUTO 9MM 1A.[70]()
Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.
C
Nonestab
2) EXTRACTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS[70]()
Specification : EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN
C
Nonestab
3) SLIDE FINISH FOR 9MM AUTO PISTOL[70]()
Specification : SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A.
Specification : LANYARD,PISTOL,OG 35-IN.DOUBLE TO SPECN.NO.E&S 3214-B(WS)/1 CLASS-'A' TO DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)FOR PISTOL AUTO 9MM 1A
C
Nonestab
6) EXTRACTOR FOR 9MM AUTO PISTOL 1A.[70]()
Specification : EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.
12) BLADE FORE SIGHT FOR 9MM PISTOL AUTO 1A.[70]()
Specification : AMENDED
C
Nonestab
13) BODY FOR 0.22[70]()
Specification : BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST
C
Nonestab
14) SEAR FOR 9MM AUTO PISTOL 1A.[70]()
Specification : IS:3748 : 1990 DESIGNATION 75 T-6
C
Nonestab
15) GAS REGULATOR FOR RIFLE 5.56MM.INSAS[70]()
Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).
C
Nonestab
16) WHEEL LOCK TO DSCAT NO.1005-560045 (DC-26554-SA)[79]()
Specification : LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.
C
Nonestab
8) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Nonestab
9) RIVET 2X10 TO DRG.NO.TRD-1-2-2239. (9911357870)[99]()
Specification : RIVET 2x10 TO DRG.NO.TRD-1-2-2239.
C
Nonestab
10) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)[99]()
Specification : SPACER TO DRG.NO.TRD-2-2-2273.
C
Nonestab
11) VALVE DRG NO 5209565 FOR 84HEAT 551 LF 9911357921[99]()
Specification : VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.
C
Nonestab
12) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321[99]()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
C
Nonestab
13) SWITCH NO 6 EMPTY ASSY OF 8 COMPO Lf 9911358008[99]()
Specification : SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt
C
Nonestab
14) SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866)[99]()
Specification : SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265.
C
Nonestab
15) SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263[99]()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
C
Nonestab
16) SPRING WASHER TO DRG NO TRD 1 22267 LF 9911357852[99]()
Specification : SPRING WASHER TO DRG.NO.TRD-1-2-2267.
C
Nonestab
17) TAIL UNIT ASY 5216051 FOR HEAT-551 (9911357820)[99]()
20) ADOPTER BUSH TO DRG NO 4 26941 007 Lf 9911358269[99]()
Specification : ADOPTER BUSH TO DRG NO.4-26941-007 DC NO.35878-A DTD. 20.12.94
C
Nonestab
21) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
22) SET OF14 ITEMS WITH PERFORATED DISC (9911356669)[99]()
Specification : SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET
C
Nonestab
23) LATCH UNIT FOR 125 MM PLY WOOD BOX (1755011144)[17]()
Specification : LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a.
R
Nonestab
24) SHELL EMPTY APT 30MM BMP II lf 9911350550[99]()
Specification : BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87
C
Nonestab
25) MOULDING OF PRIMER BODY and CONTACT LF 9911349627[99]()
Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CHAFF PAY LOAD FOR SRCR[61]()
Specification : AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD -AI/4141 DT.5.5.10
C
Nonestab
2) CHAFF PAY LOAD FOR MRCR[61]()
Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10
C
Nonestab
3) CHAFF PAY LOAD FOR LRCR[61]()
Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CLAMP TO DRG. NO. 172.55.025[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Nonestab
2) FILLING PLUG ( 450 KG)(6230400504)[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10.
[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
3) RING NUT 450 KG (6230900904)[60]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9.
DRG. ENCLOSED.
C
Nonestab
4) FILLING PLUG ( 250 KG) (6240000504)[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Nonestab
31) PLUG A/C 34 1000 LBS (6220501010)[62]()
Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE
TREATED/CAD.PLATED)
C
Nonestab
32) PLUG (MCD) 250KG (6240901205)[62]()
Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED]
DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
33) BASE TRANSIT FOR 450 KG (6230901004)[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16
[W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT WASHER AS PER DRG NO K 2072 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 2072
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4008
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)[70]()
Specification : AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)
C
Nonestab
Category : p
Grade : Grade III
Size :
SS
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR WASHER AS PER DRG NO K 2073 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 2073
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) LINK CARTG. METALLIC BELT 7.62MM M13[60]()
Specification : TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 &
TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004
(II) JSS : 0465-01-1994 (REVISION NO. 1)
NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG.
E
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) CHARGER CLIP 7.62 mm AMMUNITION- B[60]()
Specification : CIA-4205(d), DC No. 36247-A Dtd.26.02.1997 AS PER DRG. NO. CIA/AMMN/411/IQV/18A, DC(I) 35648-A DT. 12-01-1994.
SPRING TO DRG. NO. IQV 61, DCI NO. 36790-A DT. 29-10-2001 & SPECN. IS : 2507-1975.
CLIP TO DRG. IQV 62, DCI NO. 36790 DT. 29-
E
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) MULTI PURPOSE SLINGING DEVICE CHPU B S TO DRG NO CQA HV 5 95 007[62]()
Specification : MULTI PURPOSE SLINGING DEVICE(CHPU-B S) / CQA(HV)5.95.007
E
Nonestab
2) WRENCH FOR TESTING STOPPER OF TRACK DRIVE SPROCKET HUB ASSY TO DRG NO 172 95 118CB[62]()
Specification : WRENCH FOR TESTING STOPPER OF TRACK DRIVE SPROCKET HUB ASSY / 172.95.118CB
E
Nonestab
3) HOSE TO DRG NO 166 26 133CB A[62]()
Specification : HOSE / 166.26.133CB-A
E
Nonestab
4) BUSH TO DRG NO 188 21 107[62]()
Specification : BUSH / 188.21.107
E
Nonestab
5) BOLT TO DRG NO 166 29 1303[62]()
Specification : BOLT / 166.29.1303
E
Nonestab
6) SUPPORTING SADDLE FOR STARTER GENERATOR TO DRG NO 172 70 001 7[62]()
Specification : SUPPORTING SADDLE FOR STARTER GENERATOR / 172.70.001-7
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STUD LEVER LOCK TO D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)[70]()
Specification : AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1[70]()
Specification : AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]()
Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUSH CYLINDER GAS TO D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)[70]()
Specification : AS PER D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK FOR TAR TRUNNION K 4002 COMPONENT AS PER DRG NO TEND 2616[70]()
Specification : PREMACHINED BLANK FOR TAR TRUNNION K 4002 COMPONENT AS PER DRG NO TEND 2616
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR FROM OFT MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR FROM OFT MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Nonestab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()
Specification : AS PER DRG No.TEND :2509 (for K-1202)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
2) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL
C
Nonestab
3) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
4) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
5) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
2) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]()
Specification : AS PER DRG NO TEND 2383 STR 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
3) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MODIFIED LEVER CHANGE FOR ASSAULT RIFLE GHAATAK[70]()
Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Engine Factory Avadi
Name
Specification
Use
Status
1) BEARING CAP OF 8TH SUPPORT TO DRG.NO.3301-187-A()
Specification : 3301-187-A
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC CROSS BOLT HOOK LATCH AS PER DRG NO: K-IC-4004[70]()
Specification : AS PER DRG NO: K-IC-4004
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT ASSY K1030[70]()
Specification : K1030
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
2) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
3) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
4) FRONT SIGHT ASSY K1030[70]()
Specification : K1030
C
Nonestab
5) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL
C
Nonestab
3) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 188 21 107[62]()
Specification : BUSH / 188.21.107
E
Nonestab
2) AIR VENT VALVE ASSY TO DRG NO 172 36 094CBCB[62]()
Specification : AIR VENT VALVE ASSY / 172.36.094CBCB
1) PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY,TYPE-BRUS HING CONSISTENCY[10]()
Specification : PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY,TYPE-BRUS HING CONSISTENCY TO SPECN:IS-168 - 2016, 4TH REVISION APPLICABLE FOR DEFENCE USE & COLOUR SHADE ISC NO.359 OF IS: 5-2007(6TH REVISION) REAF-2017. (TO BE SUPPLIED IN 5 LTRS P
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1011312220 PAINT OLIVE GREEN MATT FINISH[10]()
Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION
R
Nonestab
2) 1011312446 PAINT RED OXIDE MATT FINISH GEN PUR[10]()
Specification : ISC 446 OF IS: 5- 1994 (FOURTH REVISION) (AMDT-1) TO SPECN IS: 168-1993 (THIRD REVISION)
R
Nonestab
3) 1011518001 PAINT BLACK MATT FINISH SPRAYING[10]()
Specification : READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2004 (FIFTH REV) AMENDMENT NO.1 1995 CONFORMING TO IS:138-1992 (THIRD REV) MAKE ASIAN,NEROLACK,BERGER IS ACCEPTABLE.
R
Nonestab
Category : p
Grade : Grade I
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) PAINT RM WHITE[10]()
Specification : IS: 138-1992 (3RD REV) REAFF 2009 AS APPLICABLE FOR DEFENCE USE. SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 DEGREES TO 50 DEGREES
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) PAINT RFU ADMFRED[10]()
Specification : IS: 168-1993 (3RD REV) REAFF : 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDL. CLAUSES AS PER CQA(ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 & CQA/ME/7209/UPS/2 DT 24.10.90
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) PAINT RM RED SIGNAL[10]()
Specification : IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) PAINT RFU FINI AMMN[10]()
Specification : SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90
P
Nonestab
Category : p
Grade : Grade I
Size :
S
2825
J.M.D Consultants Pvt. Limited, New Delhi as an Indian Authorized Dealer of a foreign firm M/s Heathcoat Fabrics Limited, U.K.
A-126 Niti Bagh New Delhi Delhi
PIN1 : 110049
Phone No. : 011-26868833,
Specification : Spcn :-1. WEIGHT PER SQR.MTR.(IN GRMS)=115 gm.
2. WIDTH IN CM – 94
3. AIR POROSITY(Cub.Ft/Sqr.Ft./Sec.) - 25 TO 30.
4. BREAKING STRENGTH(In Kg)-50 Min. BOTH DIRECTION.
5. THICKNESS IN MM 0.25 (Max).
Specification : A SET OF ASSY.SPRING FRONT & REAR CONSISTING OF 1 NO.OF ASSY FRONT SPRING (DRG.NO.2154-3210-0401V5)NON DRIVERS SIDE TO PART.NO.2154-3210-0101,1NO.OF DRIVERS SIDE(DRG.NO.2154-3210-0401V5)PT.NO.2154-3210-0102 AND 2NOS OF ASSY.REAR SPRING TO
1) 6570250501 ANTISTATIC POLYPROPYLENE IMPACT CO POLYMER CORRUGATED SHEET PPCS ANNULAR DIS DIA 128 MM X 06 MM SPECIFICATION OFCH SPECN PP 102 DRG NO FQ CA V 131 A[65]()
Specification : ANTISTATIC POLYPROPYLENE IMPACT CO-POLYMER CORRUGATED SHEET(PPCS) ANNULAR DIS DIA 128 MM X 06 MM. SPECIFICATION : OFCH/SPECN/PP/102 DRG NO.FQ/CA/V/131-A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 520[14]()
Specification : AS PER DRAWING
P
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C[14]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX CO 437[14]()
Specification : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 484 A[14]()
Specification : AS PER DRAWING
P
Nonestab
2) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 485[14]()
Specification : AS PER DRAWING
P
Nonestab
3) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 490 B[14]()
2) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA[70]()
Specification : Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA.
C
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
4) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
5) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
6) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
7) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
8) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
9) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
10) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
2) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
3) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
4) Pin SK 6508 TE[70]()
Specification : Pin SK- 6508 /TE
C
Nonestab
5) RECEIVER FOR GPMG WITHOUT HEAT TREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Guide Piece Cocking for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 005 00DB[70]()
Specification : Guide Piece Cocking for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 005 00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) PLASTIC ANTIQUE TIP BLACK[21]()
Specification : LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
1) C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METE
R
Estab
2) STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX
R
Estab
3) CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005[90]()
Specification : CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATE
R
Estab
4) CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015[90]()
Specification : CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-
R
Estab
5) CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001[90]()
Specification : CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX.
1) 9 POINT 5 MM THICKNESS CUMITUFF ARMOUR GRADE RBSIC HEXTILE 1000 SQ CM[21]()
Specification : AS PER ATTACHMENT
R
Nonestab
2) 6 POINT 5 MM THICKNESS CUMITUFF ARMOUR GRADE RBSIC HEXTILE 735 SQ CM[21]()
Specification : AS PER ATTACHMENT
R
Nonestab
Category :
Grade : Grade III
Size :
L
2836
S. M. Engineering Works
Ichapur, Sealdanga, Santragachi (74 No. Bus Stand Howrah Sealdanga Howrah West Bengal
PIN1 : 711104
Phone No. : 3326536771 GSTIN : 19ADXPM4056C1Z7
1) GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A DC 3774 ME DT 28 07 2003
Description : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A DC 3774 ME DT 28 07 2003()
Specification : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003.
