Specification : DRG.NO. ARM 1466 D1 BASED ON DD(L) 8008
C
Nonestab
5) BOX WOOD PKG TO DRG.AFK/SK-2823[65]()
Specification : DRG NO. AFK/SK - 2823
C
Nonestab
6) BOX WOOD NO :- S-5 MK-1(IN)[65]()
Specification : DRG. NO.ARDE-2055 SHT NO.03
C
Nonestab
7) AMMUNITION CONTAINER M31-A,CQA/AMN/2870[99]()
Specification : DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A
C
Nonestab
8) BOX W 123 MK2 DESIGNER'S REF IA 882[65]()
Specification : IA 948 (a,k) DC 36868-A.
C
Nonestab
9) BOX S-12 WOOD FOR FUZE YDB-60[65]()
Specification : DRG.NO.NAI(V)5508 WITH 1)TIN LINER(EMPTY)TO DRG.NO.NAI(V)-5509/1,QTY-2NOS.2)PACKING PIECE-I,ASSY.TO DRG NO.NAI(V)-5509/2QTY-4NOS. 3)PACKING PIECE-II TO DRG.NO.NAI (V)-5509/3, QTY-4NOS. & 4)PACKING PIECE TO DRG.NO.NAI(V)- 5510/1, QTY-1NOS.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) G.C.RECTIFIER VERNISHED[21]()
Specification : DRG. NO.DD(L) 6607
C
Nonestab
2) CASES WOOD PACKING 6 A/L W/O HANDLE[65]()
Specification : IA 948
C
Nonestab
3) CRATE ROCKET A/S RGB-60 MK1[65]()
Specification : DRG NO. NAI (K)4502 (PROV.)
C
Nonestab
4) CASE WOOD PACKING NO.55,KF/1066[65]()
Specification : DRG.NO.KF/1066
C
Nonestab
5) CASES WOOD PACKING 7A/L CIA/AMN/570[65]()
Specification : IA 948
C
Nonestab
6) CRATE RGB-12, IN, MK-2 (PRACTICE)[65]()
Specification : DRG. NO. NAI (B)- 4005 (PROV)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PLY WOOD1200X1200MMXX3MM IS303-1975[22]()
Specification : PLY WOOD FOR GENERAL PURPOSE,GRADE MR TYPE BB SIZE 120 cm X120 cm X 3 mm THICK, 3 PLY, SPECN IS:303-1989 (3RD REVISION) WITH AMENDMENT NO.1 , 2,3,4,5, & 6.
R
Nonestab
2) PLYWOOD 120X120CMX6MM THICK 5PLY[22]()
Specification : IS:303-1989
R
Nonestab
3) PLYWOOD 120X120X6MM IS:303-1975[22]()
Specification : IS:303-1989 ( THIRD REVISION ) REAFFIRMED 2003 WITH AMENDMENT NOS. 1,2,3,4 5, & 6
Specification : TNT/CE (75/25) OR TNT IA PLYWOOD TO HOLD 20 SLABS TO DRG IND/ME/58 DC 3691 ME DT. 03.07.2001 AND SPECN. NO. JSS 1375-10-2014 DC 5216-ME DT 12.04.14
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) CASE HEMK-1 A/L WOOD (SER ) for pkg. 25 Kg. RDX/TNT 60/40[10]()
Specification : DRG. NO. HEF/5038 & TIMBER MATERIAL TO SPECN. HEF/IO/TC&N/10/DT.16/10/2006
P
Nonestab
Category : p
Grade : Grade I
Size :
S
2782
SAIEASH ENGINEERING WORKS PVT LTD
Gala N0. 1 , Lawrence Ind. Estate, Near Ipol Co. WALIV FATA VASAI EAST THANA Maharashtra
PIN1 : 401208
Phone No. : 28745555 GSTIN : 27AAFCS3384R12J
3) Steel blank of Receiver plate Left and Right FOR MAG[70]()
Specification : AS PER DRG.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Plate Armature in finished condition[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
C
Nonestab
2) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT[70]()
Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)
C
Nonestab
3) Hammer for JVPC[70]()
Specification : HAMMER FOR JVPC 5.56MM
C
Nonestab
4) PIN AUTO SEAR FOR JVPC[70]()
Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB
C
Nonestab
5) Blank for Piston extension stage VI[70]()
Specification : Blank for Piston Extension (Stage VI) to Drg.No. SKJVPC 730* for JVPC 5.56MM Note:-Raw material will be supplied by SAF on freight to pay basis against the B/G through L.F.NO.0412001042. (I/Code-0132089519)
C
Nonestab
6) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Nonestab
7) Steel blank of Receiver plate Left and Right FOR MAG[70]()
Specification : AS PER DRG.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Hand Guard Assembly for JVPC[70]()
Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM[70]()
Specification : PLUNGER LEVER CHANGE TO DRG NO.AKC-10/4 FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
2) TRIGGER IN FINISHED CONDITION FOR CARBINE 5 56MM[70]()
Specification : TRIGGER TO DRG NO AKC 01/8 IN FINISHED CONDITION FOR CARBINE 5.56MM
C
Nonestab
3) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM[70]()
Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION.
C
Nonestab
4) STUD COCKING HANDLE FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : STUD COCKING HANDLE TO DRG NO.AKC-08/10 FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
5) STOPPER FRONT IN FINISHED CONDITION FOR AMOGH 5 56MM[70]()
Specification : STOPPER FRONT TO DRG NO. AKC-09/5* IN FINISHED CONDITION FOR AMOGH 5.56MM.
C
Nonestab
6) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010
C
Nonestab
7) SPRING HELICAL TORSION FOR HAMMER FOR CARBINE 5 56[70]()
Specification : SPRING HELICAL TORSION FOR HAMMER IN F/D CONDN. TO DRG.NO.ARDE/SK-2689/131 DS CAT NO.5360-007109 DC(I)NO.26937-SA DT.09.09.16
C
Nonestab
8) PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION[70]()
Specification : PLUNGER LOCK COVER DRG NO AKC 01/7 FOR CARBINE 5.56 MM IN FINISHED CONDITION
C
Nonestab
9) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56[70]()
Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION.
C
Nonestab
10) RETAINER SPRING RECOIL IN FINISHED CONDITION FOR AMOGH 5 56MM[70]()
Specification : RETAINER SPRING RECOIL TO DRG NO. AKC-09/1/1 IN FINISHED CONDITION FOR AMOGH 5.56MM.
C
Nonestab
11) SEAR SK 2689/239 SOFT COND.L5[70]()
Specification : SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26524 SA DT-16.07.10.,
21) SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008[70]()
Specification : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008
C
Nonestab
22) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.[70]()
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
C
Nonestab
23) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10[71]()
Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
C
Nonestab
24) PIN PLUNGER LOCK BUTT FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : PIN PLUNGER LOCK BUTT TO DRG NO.AKC-13/7* FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
25) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
26) PIN LOCKING PIN FIRING IN FINISHED CONDITION DS CAT NO 5315 010101[70]()
Specification : PIN LOCKING PIN FIRING IN FINISHED CONDITION TO DRG.NO-ARDE/SK-3143/78.DC(1)26929-SA.DT-03.09.2016 DS CAT NO 5315-010101.
C
Nonestab
27) PLUNGER DS CAT NO 1005 007901 IN FINISHED CONDITION FOR LMG 5 56[70]()
Specification : PLUNGER TO DRG. NO. ARDE SK- 2825/34,DS CAT NO. 1005-007901 DC(I) NO. 26954-SA, DT. 04/10/16 IN FINISHED CONDITION
C
Nonestab
28) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56[70]()
Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16
C
Nonestab
29) PLUNGER FOR AMOGH CARBINE 5 56[70]()
Specification : PLUNGER TO DRG. NO. ARDE SK 2689/87.IN FINISHED CONDITION DS CAT NO-1005-007827. DC(I)26547-SA,DTD-24.11.2010
C
Nonestab
30) REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM[70]()
Specification : REFLECTOR TO DRG NO.AKC-12/2 FOR CARBINE 5.56MM IN FINISHED CONDIION.
C
Nonestab
31) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56[70]()
Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16
R
Nonestab
32) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56[70]()
Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH.
C
Nonestab
33) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56[70]()
Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH
C
Nonestab
34) RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : RIVET SPACER DRG NO AKC 03/9 FOR CARBINE 5.56MM IN FINISHED CONDITION
C
Nonestab
35) SCREW FRONT SLING LOOP FOR LMG 5 56[70]()
Specification : SCREW FRONT SLING LOOP TO DRG. NO. ARDE SK- 3145/29,DS CAT NO. 5305-018855 DC(I) NO. 26950-SA, DT. 27.09.16
C
Nonestab
36) SCREW M C SLOTTED FOR LMG 5 56[70]()
Specification : SCREW M/C SLOTTED CSK HD M6 X 25-IS-1365 DULY PHOSPHATED
C
Nonestab
37) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016
C
Nonestab
38) SPRING HELICAL COMPRESSION PLUNGER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : SPRING HELICAL COMPRESSION PLUNGER TO DRG.ARDE SK-2689/86 IN FINISHED CONDITION. DS CAT NO. 5360-007212 DC(I) NO. 26548-SA DT- 25.11.10
C
Nonestab
39) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56[70]()
Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GUARD HAND ASSY UPPER STEEL STRIP[70]()
Specification : GUARD HAND ASSY. UPPER (STEEL STRIP) AS PER DRG NO./DS CAT NO. 1005-560046 DC (I) NO.26533-SA DT.31.07.10 IN FINISHED CONDITION. NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695, TO SPECN. IS 5:2007.
C
Nonestab
2) Housing Plunger to DS CAT NO 1005 007900[70]()
Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16
Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02
C
Nonestab
11) BODY COVER RIGHT HAND AIR VERSION FOR MAG 7 62 MM[70]()
Specification : BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002
.
C
Nonestab
12) Body Upper Feed Mechanism Slide 1005-006823[70]()
Specification : As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating
C
Nonestab
13) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
14) Guide upper Left for MAG[70]()
Specification : .GUIDE UPPER LEFT TO DS CAT NO. 1005-006836 DC(I) NO. 27011-SA DT.14.01.17 IN FINISHED CONDITION.
C
Nonestab
15) BLANK FOR TRAY AS PER DRG.NO.SKM-864[70]()
Specification : BLANK FOR TRAY AS PER DRG.NO.SKM-864
C
Nonestab
16) BUFFER BODY FOR PLATE BACK ASSY. TO DRG. NO. DS CAT NO.1005- 0 06645[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
C
Nonestab
17) BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION[70]()
Specification : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION
C
Nonestab
18) FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION.[70]()
Specification : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION.
C
Nonestab
19) FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.[70]()
Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.
C
Nonestab
20) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.[70]()
Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.
C
Nonestab
21) CENTRAL PAWL SPRING[70]()
Specification : CENTRAL PAWL SPRING DS CAT NO.5360-000514 DC(I) NO.27017-SA DT.27-01-17
C
Nonestab
22) BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.[70]()
Specification : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.
C
Nonestab
23) FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION.[70]()
Specification : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. (MATERIAL WILL BE SUPPLIED BY S.A.F ON FREIGHT TO PAY AGAINST B/G.
C
Nonestab
24) BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.[70]()
Specification : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.
C
Nonestab
25) FRONT AND REAR FEED PAWLS AXIS[70]()
Specification : FRONT AND REAR FEED PAWLS AXIS TO DS CAT NO. 5315-001513 DC(I) NO. 27015-SA DT- 16-01-17 IN FINISHED CONDITION.
27) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.[70]()
Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
C
Nonestab
28) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.[70]()
Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.
C
Nonestab
29) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.[70]()
Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.)
C
Nonestab
30) COVER PLATE ACCESS TO DS CAT NO. 1005-006647 DC(I) NO. 25325-SA DT- 10.4.02 IN FINISHED CONDITION.[70]()
Specification : COVER PLATE ACCESS TO DS CAT NO. 1005-006647 DC(I) NO. 25325-SA DT- 10.4.02 IN FINISHED CONDITION.
C
Nonestab
31) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.[70]()
Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.
C
Nonestab
32) BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO.25387-SA DT.07.06.02 IN F INISHED CONDITION.[70]()
Specification : BUSHING BLANK, TO DS CAT NO. 5340-009974 DC(I) NO.25387-SA DT.07.06.02 IN F INISHED CONDITION.
C
Nonestab
33) HANDLE COCKING SLIDE WITHOUT ANODIZING DRG.NO. SKM-1004[70]()
Specification : HANDLE COCKING SLIDE WITHOUT ANODIZING DRG.NO. SKM-1004
Specification : FORK CARRIER TO DS CAT NO. 1005-000685 DC(I) NO. 22564-SA DT- 3.6.94 IN FINISHED CONDITION.
C
Nonestab
49) FRONT AND REAR FEED PAWLS SPRING for MAG[70]()
Specification : FRONT AND REAR FEED PAWLS SPRING TO DS CAT NO. 5360-000515 DC(I) NO. 27017-SA DT- 27.01.2017 IN FINSHED CONDITION.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) LEVER CHANGE RIGHT FOR CARBINE 5 point 56MM[70]()
Specification : AS PER DRAWING
C
Nonestab
2) CHANGE LEVER LEFT FOR CARBINE 5point56MM[70]()
Specification : CHANGE LEVER LEFT TO DRG NO. AKC-10/1/2 FOR CARBINE 5.56MM.
C
Nonestab
3) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
C
Nonestab
4) Catch Cocking Handle Moulding Assy for LMG[70]()
Specification : PIN-FIRING DRG.NO-PH-MK-II-1-29 IN FINISHED CONDITION OF 32"REVOLVER MK-III.
C
Nonestab
2) STUD BAYONET FOR CARBINE 9 MM[70]()
Specification : STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000.
C
Nonestab
3) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER[70]()
Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19
C
Nonestab
4) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION[70]()
Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009
C
Nonestab
5) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION[70]()
Specification : SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97
C
Nonestab
6) LEVER EXTRACTOR FOR REVOLVER[70]()
Specification : LEVER EXTRACTOR DRG.NO.PH-1-7 IN FINISHED CONDITION D.A. NO. 05/18 DT. 07-03-18.
C
Nonestab
7) CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER THROUGH MIM ROUTE[70]()
Specification : CATCH TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-2 ALT D.A.NO. 56/08 , DT. 10-09-08, THROUGH MIM ROUTE.
C
Nonestab
8) Blank for Ring CAP for Carbine 9mm[01]()
Specification : BLANK FOR RING CAP TO DRG.NO-SK-5183*.D.A. NO. 04/17 DT. 18.01.17
C
Nonestab
9) Body ForeSight drg .no. 1005-000896 for Carbine 9mm[70]()
Specification : BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990.,
C
Nonestab
10) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]()
Specification : AS PER DRG.no. 1005-000977
C
Nonestab
11) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016.
C
Nonestab
12) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE[70]()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
C
Nonestab
13) PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK III DRG NO PHMK III 1 2 THROUGH MIM ROUTE[70]()
Specification : PAWL IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-2, D.A. NO. 05/18 DT.07.03.2018. THROUGH MIM ROUTE.
C
Nonestab
14) Cradle Sear IN Finished Condition[70]()
Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07
C
Nonestab
15) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978[70]()
Specification : AS PER DRG.
C
Nonestab
16) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM[70]()
Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1
C
Nonestab
17) LEVER LOCKING FOR CARBINE 9 MM[70]()
Specification : LEVER LOCKING(CISA-633)DS CAT NO-1005-006886 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26900-SA DATED-20-07-2016.
C
Nonestab
18) PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : PIVOT BUTT TO DS/CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16.
C
Nonestab
19) EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1[70]()
Specification : EXTRACTOR TO DS CAT. NO.5120-007853 D C(I) NO-26339-SA DT.21-05-07 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.
C
Nonestab
20) FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION[70]()
Specification : FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION
C
Nonestab
21) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER[70]()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
C
Nonestab
22) Plunger DRG No. 1005-000832[70]()
Specification : As per Drg.
C
Nonestab
23) SPG CATCH MAGAZINE 5360 000789 FOR CARBINE 9MM[70]()
24) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM[70]()
Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001
C
Nonestab
25) PIN LOCKING TRIGGER MECH-9MM[70]()
Specification : PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016
C
Nonestab
26) CUP SPRING RETURN 5365-010528[70]()
Specification : CUP SPRING RETURN(ICR1139)DS CAT NO 5365-010528DC(I)26375-SA DT.05-09-2007 OF CARBINE 9 MM 1A1IN FINISHED CONDITION .,
C
Nonestab
27) Machining of CAP of 9MM Carbine in finished condition[70]()
Specification : Machining of CAP of 9MM Carbine in finished condition DS CAT No. 1005-000860 from I.C. Cap (Material will be supplied by SAF against B.G.)
C
Nonestab
28) BUTT ASSY FOR CARBINE 9MM[70]()
Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1
C
Nonestab
29) Dowel barrel support DS CAT No 1005 000865[70]()
Specification : DOWEL BARREL SUPPORT D S CAT NO-1005-000865 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)-26881-SA DT.01-07-16.
C
Nonestab
30) Pin butt DS CAT No 5315 009110 in finished condition[70]()
Specification : PIN BUTT D S CAT NO-5315-009110 IN FINISHED CONDITION OF SMG9MM CARBINE 1A1.DC(I)-26908-SA DT.05.08.16
C
Nonestab
31) SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007
C
Nonestab
32) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER[70]()
Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11
C
Nonestab
33) STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06[70]()
Specification : DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06
C
Nonestab
34) SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016.[70]()
Specification : SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016.
C
Nonestab
35) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.[70]()
Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.
C
Nonestab
36) SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007[70]()
Specification : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007
C
Nonestab
37) BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.[70]()
Specification : BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.
C
Nonestab
38) PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.[70]()
Specification : PIN LEVER LOCKING D S CAT NO-1005-000871 IN FINISHED CONDITI ON OF SMG 9MM CARBINE 1A1.DC(I)26882-SA DT.02-07-16.
C
Nonestab
39) MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000[70]()
Specification : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000
C
Nonestab
40) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.[70]()
Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.
C
Nonestab
41) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.[70]()
Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.
C
Nonestab
42) PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.[70]()
Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.
C
Nonestab
43) BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.[70]()
Specification : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.
C
Nonestab
44) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.[70]()
Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.
R
Nonestab
45) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]()
Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.
C
Nonestab
46) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.[70]()
Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.
C
Nonestab
47) PIN LEVER LOCKING CAP D S CAT NO-5315-002017 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26341-SA DT.01-06-2007[70]()
Specification : PIN LEVER LOCKING CAP D S CAT NO-5315-002017 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26341-SA DT.01-06-2007
C
Nonestab
48) PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.[70]()
Specification : PIN BACK SIGHT D S CAT NO -5315-002019 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I) 22734-SA DT.25.11.94.
C
Nonestab
49) SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM[70]()
Specification : SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16.
C
Nonestab
50) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Nonestab
51) PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : PIN SPRING STOP DS CAT NO 5315-002026 DC(I)NO.24969 DATED 19-03-2001 IN FINISHED CONDITION
C
Nonestab
52) SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM[70]()
82) PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99[70]()
Specification : PIN GRIP & AXIS CYLINDER TO DRG NO.PH-3-3 IN SOFT CONDITION.D.A. NO. 84/99 DT 29.6.99
C
Nonestab
83) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION[70]()
Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION
C
Nonestab
84) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER[70]()
Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09
C
Nonestab
85) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142[70]()
Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142
C
Nonestab
86) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.[70]()
Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.
C
Nonestab
87) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION[70]()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Nonestab
88) Nut Extractor for Revolver[70]()
Specification : Nut Extractor for Revolver to Drg. No. PH-4-2 in finished Condition D.A. No. – 35/04, Dt. 09-04-04
C
Nonestab
89) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56[70]()
Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16
R
Nonestab
90) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
91) CENTRE PIN TO DS CAT NO 5315 009119 IN FINISHED CONDITION FOR CARBINE 9MM[70]()
Specification : CENTRE PIN TO DS CAT NO. 5315-009119 DC(I) NO. 26372-SA DT. 16-08-07 IN FINISHED CONDITION
C
Nonestab
92) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02
C
Nonestab
6) LINK ROLLER for MAG 7 62MM[70]()
Specification : LINK ROLLER TO DS CAT NO.1005-000467 DC(I)25298 SA DT. 19.3.02 IN FINISHED CONDITION. (STRD.10MMDIA GD-534A99WILL BE SUPPLIED BY SAF ON B/G LF0352002010)
AS PER DRG.
C
Nonestab
7) ROLLER FOR MAG[70]()
Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG.
C
Nonestab
8) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
9) LINK LOWER for MAG[70]()
Specification : LINK (LOWER) TO DS CAT NO. 1005-000469 DC(I) NO. 25303-SA DT- 23.01.02 IN FINISHED CONDITION WITHOUT HT & PLATING.
AS PER DRG
Specification : Rear Feed Pawl to DS CAT no. 1005-006638 DC(I) NO. 25321-SA, DT. 08-04-02 in finished condition
C
Nonestab
13) ROLLER GUIDE FEED SLIDE UPPER FOR MAG[70]()
Specification : DS CAT NO. 3120-004658, DC NO.27108-SA,DT.23-06-17 IN FINISHED CONDITION (MATL.ST ROD.10 MM DIA WILL BE SUPPLIED BY S.A.F.ON B/G FROM L.F.NO.0352001010AS PER DRG.AS PER DRG.
C
Nonestab
14) Steel blank of Receiver plate Left and Right FOR MAG[01]()
Specification : AS PER DRG.
C
Nonestab
15) SECURING NUT GAS REGULATOR FOR MAG[70]()
Specification : DS CAT NO.5310-002662 DC(I) 25349-SA DT.30.4.02 (MATL.ST.RD.19.05 MM DIA GD.605M36 FROM L.F.NO.0283000019 WILL BE SUPPLIED BY S.A.F.ON B/G.)AS PER DRGAS PER DRG
Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99
C
Nonestab
18) RIVET SOLID FOR MAG[70]()
Specification : RIVET SOLID MS RD.HD.4.107 X 9.5MM LONG DS CAT NO.5320-001336 IN FINISHED CONDITION DC(I) NO. 24714SA DT. 09.05.2000
C
Nonestab
19) Locating Key Gas Regulator Screw for MAG[70]()
Specification : LOCATING KEY GAS REGULATOR SCREW TO DS CAT NO. 5315-001505 DC(I) NO. 25355-SA DT- 7.5.02 IN FINISHED CONDITION.
C
Nonestab
20) PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006[70]()
Specification : PIN RETAINING CATCH FEED COVER IN FINISHED CONDITION DS CAT NO. 5315-001520, DC(I) NO. 26160-SA DATE 14/02/2006
C
Nonestab
21) SPLIT COLLAR GAS REGULATOR FOR MAG[70]()
Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION.
C
Nonestab
22) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02[70]()
Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)
C
Nonestab
23) PIVOT COVER LATCHES SPRING FOR MAG[70]()
Specification : PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G)
C
Nonestab
24) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.[70]()
Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.
Specification : DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION.
C
Nonestab
54) PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION[70]()
Specification : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
C
Nonestab
55) PIN RETAINING HANDLE COCKING SLIDE for MAG[70]()
Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION.
C
Nonestab
56) SLEEVE GAS REGULATOR FOR MAG[70]()
Specification : SLEEVE GAS REGULATOR TO DS CAT NO. 3120-004755 DC(I) NO. 25570-SA DT- 29.10.02
C
Nonestab
57) SIGHT REAR FOR MAG[70]()
Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.
C
Nonestab
58) SLEEVE BOLT COVER IN FINISHED CONDITION[70]()
Specification : SLEEVE BOLT COVER IN FINISHED CONDITION DS CAT NO.1005-006624 DC (I) NO.26159-SA,DT.09-02-06 (MATL.ST.ROD 1/2" DIA GD.605M36 FROM L.F NO.0283001013/02830 00012 WILL BE SUP.BY.SAF .ON B/G.
C
Nonestab
59) LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.[70]()
Specification : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.
C
Nonestab
60) LINK CROSS PIECE LONG DSCATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02[70]()
Specification : LINK CROSS PIECE LONG DS CATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02
C
Nonestab
61) REAR END OUTER TUBE RETURN SPRING FOR MAG[70]()
Specification : PART NO. 2045AF TO DS CAT NO. 1005-006844 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION.
70) Post Aiming MG MK 3 DS CAT No 1290x000258[71]()
Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition
C
Nonestab
71) PIN FIRING for MAG[70]()
Specification : PIN FIRING,DS CAT NO.1005-006641 IN FINISHED CONDITION (MATERIAL TO BE ISSUED AGAINST BANK GUARANTEE) MAG 7.62 MM DC(I) NO. 25325-SA, DT.10.04.2002
C
Nonestab
72) PIN LOCATING SEAR SPRING for MAG[70]()
Specification : PIN LOCATING SEAR SPRING TO DS CAT NO. 5315-001541 DC(I) NO. 27013-SA DT- 14.01.17 IN FINISHED CONDITION.
C
Nonestab
73) PIN RETAINING COCKING STUD for MAG[70]()
Specification : PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 27013-SA DT- 14/01/17 IN FINISHED CONDITION.
C
Nonestab
74) PIN STRAIGHT HEADLESS FRONT SIGHT BAND for MAG[70]()
Specification : LEG RIGHT FRONT ASSY.DS CAT NO.1005-000676 (M.T) D C NO. 25202-SA DT.27.11.2001
C
Nonestab
85) LEVER CLAMPING FRONT LEG ASSY for MAG[72]()
Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION.
C
Nonestab
86) ROLLER GUIDE FEED SLIDE LOWER FOR MAG[70]()
Specification : DS CAT NO.3120-004657 IN FINISHED CONDITION DC NO. 25298-SA , DT.19-03-02 (MAT.ST.RD.10 MM DIA GD.535A99 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0352001010
C
Nonestab
87) LEVER CLAMPING REAR LEG ASSY for MAG[72]()
Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06
5) PACK BOX FOR ANGLE MACHANISM L F NO 1460401134[14]()
Specification : PACKING BOX FOR ANGLE MECHANISM T-01/MA/4033116/63 L.F.NO.1460401134
P
Nonestab
6) PACKING BOX FOR HEAD L F NO 1460401135[14]()
Specification : PACKING BOX FOR HEAD T-01/3.906.043CB/64 L.F.NO.1460401135
P
Nonestab
7) PACKING BOX OF HEAD OF 1G46 L F NO 1460401129[14]()
Specification : PACKING BOX OF HEAD OF 1G46(T-90) OLF/MISC/974 L.F.NO.1460401129
P
Nonestab
8) PACKING BOX FOR POWER UNIT L F NO 1460400007[14]()
Specification : PACKING BOX FOR POWER UNIT(ELECTRO BLOCK) TO DRG NO AL 4161555 L.F.NO.1460400007
P
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) STOWAGE BOX FOR K 10T LF NO 1460400004[14]()
Specification : STOWAGE BOX FOR K-10T L.F.NO.1460400004
P
Nonestab
2) PACKING BOX 9SH 119 LF NO 9927081835[99]()
Specification : PACKING BOX FOR 9 SH 119 L.F.NO.9927081835
P
Nonestab
3) CRAMP OR CLAMP LF NO 7440205783[74]()
Specification : CRAMP OR CLAMP LF NO 7440205783
C
Estab
4) RING DRG NO AL8247267 LF NO 7440206008[74]()
Specification : RING DRG NO AL8247267 LF NO 7440206008
C
Nonestab
5) TAPE TO DRG NO AL8610734 (LF 7445101270)[74]()
Specification : TAPE TO DRG NO AL8610734 (LF 7445101270)
C
Estab
6) CLAMP LF NO 7445201351[74]()
Specification : CLAMP LF NO 7445201351
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) CASE CANVAS AS PER DRG NO CWC 235 2 1
Description : CASE CANVAS AS PER DRG NO CWC 235 2 1()
Specification : CASE CANVAS AS PER DRG.NO. CWC-235/2/1
C
Estab
2) CASE CANVAS AS PER DRG.NO.CWC-234 FOR PNS 5.56MM RIFLE/LMG
Description : CASE CANVAS AS PER DRG.NO.CWC-234 FOR PNS 5.56MM RIFLE/LMG()
Specification : CASE CANVAS AS PER DRG.NO.CWC-234
FOR PNS 5.56MM RIFLE/LMG
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) CASE CANVAS AS PER DRG NO CWC 235 2 1
Description : CASE CANVAS AS PER DRG NO CWC 235 2 1()
Specification : CASE CANVAS AS PER DRG.NO. CWC-235/2/1
C
Estab
2) CASE CANVAS AS PER DRG.NO.CWC-234 FOR PNS 5.56MM RIFLE/LMG
Description : CASE CANVAS AS PER DRG.NO.CWC-234 FOR PNS 5.56MM RIFLE/LMG()
Specification : CASE CANVAS AS PER DRG.NO.CWC-234
FOR PNS 5.56MM RIFLE/LMG
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) COVER CANVAS 4 A TO DRG NO MCT 2759[00]()
Specification : COVER CANVAS 4 A TO DRG.NO.MCT-2759
C
Nonestab
2) SILICAGEL BAG SIZE 4 X 3[10]()
Specification : SILICAGEL BAG SIZE 4"X3".
C
Nonestab
3) CASE CANVAS TO DRG NO CWC 246 FOR PNVB L W M 1[00]()
Specification : CASE CANVAS TO DRG NO.CWC-246 FOR PNVB(L/W) M-1
C
Nonestab
4) CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A DRG NO MCT 1699 COMPRISING OF MCT 1695 1 MCT 1704 1 MCT 1705 1 MCT 1706 1 MCT 1707 1[00]()
Specification : CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A,DRG NO. MCT-1699,COMPRISING OF MCT-1695/1,MCT-1704/1 MCT-1705/1,MCT-1706/1,MCT-1707/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY)
C
Nonestab
5) CASE CARRYING TO DRG NO MCT 1463 1 FOR SIGHT 51MM MORTAR[00]()
Specification : CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR.
C
Nonestab
6) CORRUGATED CARTON BOX DRG ODD M 2546 2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER[74]()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Nonestab
7) COVER CANVAS AS PER DRG NO MCT 1461 NOTE EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG INDIVIDUALLY PACKED[00]()
Specification : COVER CANVAS AS PER DRG NO. MCT-1461 NOTE:EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY PACKED)
C
Nonestab
8) STRAP WEB WITH BUCKEL[00]()
Specification : STRAP WEB WITH BUCKEL"A"WITH BUCKEL3/4" WIDE X 21" LONG
C
Nonestab
9) BAG NO 3 WITH SLING EMPTY CASE CARRYING FOR TELESCOPIC SIGHT FFV 625 GF 215125 CAT PT NO 1240 002623[00]()
Specification : BAG NO 3 WITH SLING EMPTY/CASE CARRYING FOR TELESCOPIC SIGHT FFV-625 (GF-215125) CAT/PT.NO.1240-002623.
C
Nonestab
10) CASE CARRYING BAG NO 3 FOR TELESCOPE 84 MM MK III[74]()
Specification : CASE CARRYING (BAG.NO.3) FOR TELESCOPE 84 MM MK-III. NOTE:-1.SAMPLE CAN BE SEEN AT OFD.
C
Nonestab
11) CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO MCT 2964 2 FOR HR BINO 8X30[74]()
Specification : CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30.
Specification : CASE CARRYING AS PER DRG NO. MCT-1966/1
C
Nonestab
14) CASE CARRYING TO DRG NO MCT 2542 1 LOW ANGLE MCT 2542 1[00]()
Specification : CASE CARRYING TO DRG NO.MCT-2542/1,(LOW- ANGLE) MCT-2542/1
C
Nonestab
15) CASE CARRYING TO DRG NO MCT 2658 1 GUN RULE FIELD GUN CASED 101 A HIGH ANGLE[00]()
Specification : CASE CARRYING TO DRG NO. MCT-2658/1 GUN RULE FIELD GUN CASED 101-A (HIGH ANGLE)
C
Nonestab
16) CASE CARRYING AS PER DRG NO MCT 1764[00]()
Specification : CASE CARRYING AS PER DRG NO. MCT-1764
C
Nonestab
17) CASE CANVAS TO DRG NO MCT 1415[00]()
Specification : CASE CANVAS TO DRG NO. MCT-1415
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) COVER CANVAS 4 A TO DRG NO MCT 2759[00]()
Specification : COVER CANVAS 4 A TO DRG.NO.MCT-2759
C
Estab
2) SILICAGEL BAG SIZE 4 X 3[10]()
Specification : SILICAGEL BAG SIZE 4"X3".
C
Estab
3) CASE CANVAS TO DRG NO CWC 246 FOR PNVB L W M 1[00]()
Specification : CASE CANVAS TO DRG NO.CWC-246 FOR PNVB(L/W) M-1
C
Estab
4) CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A DRG NO MCT 1699 COMPRISING OF MCT 1695 1 MCT 1704 1 MCT 1705 1 MCT 1706 1 MCT 1707 1[00]()
Specification : CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A,DRG NO. MCT-1699,COMPRISING OF MCT-1695/1,MCT-1704/1 MCT-1705/1,MCT-1706/1,MCT-1707/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY)
C
Estab
5) CASE CARRYING TO DRG NO MCT 1463 1 FOR SIGHT 51MM MORTAR[00]()
Specification : CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR.
C
Estab
6) CORRUGATED CARTON BOX DRG ODD M 2546 2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER[74]()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
7) COVER CANVAS AS PER DRG NO MCT 1461 NOTE EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG INDIVIDUALLY PACKED[00]()
Specification : COVER CANVAS AS PER DRG NO. MCT-1461 NOTE:EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY PACKED)
C
Estab
8) STRAP WEB WITH BUCKEL[00]()
Specification : STRAP WEB WITH BUCKEL"A"WITH BUCKEL3/4" WIDE X 21" LONG
C
Estab
9) BAG NO 3 WITH SLING EMPTY CASE CARRYING FOR TELESCOPIC SIGHT FFV 625 GF 215125 CAT PT NO 1240 002623[00]()
Specification : BAG NO 3 WITH SLING EMPTY/CASE CARRYING FOR TELESCOPIC SIGHT FFV-625 (GF-215125) CAT/PT.NO.1240-002623.
C
Estab
10) CASE CARRYING BAG NO 3 FOR TELESCOPE 84 MM MK III[74]()
Specification : CASE CARRYING (BAG.NO.3) FOR TELESCOPE 84 MM MK-III. NOTE:-1.SAMPLE CAN BE SEEN AT OFD.
C
Estab
11) CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO MCT 2964 2 FOR HR BINO 8X30[74]()
Specification : CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30.
Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HEX HEADED SCREW M12X25MM[90]()
Specification : HEX HEADED SCREW M12X25MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8-PL AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.
C
Nonestab
2) HEX HEAD HIGH TENSILE BOLT[90]()
Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL
C
Nonestab
3) HEX NUT M16 X 2 IS1364[90]()
Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8
C
Nonestab
4) HEX HEAD NUT M12 TO IS1364[90]()
Specification : HEX HEAD NUT M12 TO IS:1364 (PART-3)-8-BL
C
Nonestab
5) SPRING WASHER A12[90]()
Specification : SPRING WASHER A12 IS:3063-CD PLATED
C
Nonestab
6) PUNNCHED WASHER A13[90]()
Specification : PUNCHED WASHER A13 TO TYPE A (14X24X2.5) IS:2016-STEEL -CD PLATED
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
Specification : PLAIN NUT M22 (AD) PLAIN NUT M22 IS-1364 PT.3.P.8 PHOSPHATED FINISH & OIL PASSIVATED AS PER IS: 3618 CLASS - B PT NO.L 3012218
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]()
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
C
Nonestab
2) HEX HEADED SCREW M12X1.75X30MM[90]()
Specification : HEX HEADED SCREW M12X1.75X30MM TO IS:1364 (PART-2)-8, 8-PL WITH HEX NUT M12-IS:1364 (PART-3) -8- AND WITH SPRING WASHER A12-IS:3063 Cd PLATED-BOLT AND NUT.
C
Nonestab
3) HEX NUT M16 X 2 IS1364[90]()
Specification : HEX NUT M16 X 2 IS:1364-(PART-3)-8
C
Nonestab
4) HEX NUT M8 IS 1364[90]()
Specification : HEX NUT M8-IS:1364(PART-3)-8
C
Nonestab
5) SPRING WASHER A12[90]()
Specification : SPRING WASHER A12 IS:3063-CD PLATED
C
Nonestab
6) HEX HEAD SCREW M12X50[90]()
Specification : HEX HEAD SCREW M12X50 IS:1364 (PART-2)-8.8
C
Nonestab
7) HEX HEAD SCREW M8X30[90]()
Specification : HEX HEAD SCREW M8X30 IS:1364 (PART-1)-10.9
C
Nonestab
8) CASTLE NUT M10 IS 2232[90]()
Specification : CASTLE NUT (M10)/IS:2232
C
Nonestab
9) HEX HEADED BOLT M 20 45 MM[90]()
Specification : HEX HEADED BOLT M20X45 MM HIGH TENSILE TO IS:1364(PART-1)-8.8 BL WITH HEX NUT M20- IS:1364(PART-3)-8-8-BL AND WITH SPRING WASHER A20-IS:3063 Cd PLATED -BOLT AND NUT
C
Nonestab
10) HEX HEADED BOLT M12 60[90]()
Specification : HEX HEADED BOLT M12 X 60 MM TO IS:1364(PART-1)-8-8-PL
C
Nonestab
11) HEX HD BOLT M14 35 IS 1364[90]()
Specification : HEX HD BOLT M14X35 IS:1364 GRADE -8.8
C
Nonestab
12) SPRING WASHER M24 IS 6735[90]()
Specification : SPRING WASHER M24 IS:6735
C
Nonestab
13) HEX HEADED SCREW M8 16 MM[90]()
Specification : HEX HEADED SCREW M8X16 MM TO IS:1364 (PART-2)-8.8-PL
C
Nonestab
14) SPRING WASHER A10 IS 3063[90]()
Specification : SPRING WASHER A10 IS:3063-CD PLATED
C
Nonestab
15) HEX HEADED BOLT M14 2 35 MM[90]()
Specification : HEX HEADED BOLTM14X2X35MM TO IS:1364(PART-2)8.8-BL
Specification : PLAIN NUT M12 X 1.5 (108-00) GALV. & YELLOW PASSIVATED PART NO. L-3021218 TO IS -1364-1992 PART - 3.P.8
C
Estab
23) LPTA PLAIN NUT M12 X 1 75
Description : LPTA PLAIN NUT M12 X 1 75()
Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8
C
Estab
24) LPTA Set of WASHER
Description : LPTA Set of WASHER()
Specification : SET of WASHER (LPTA) CONSISTING OF (1) PUNCHED WASHER TYPE -A 18 IS 2016 ST QTY 4/SET (II) WASHER SPRING B 16 IS 3063 QTY 4/SET (III) SPRING WASHER B 12 IS 3063 QTY 12/SET (IV) PUNCHED WASHER TYPE A 14 IS 2016 QTY 12/SET
C
Estab
25) LPTA SL CH HEAD SCREW M5X20 WITH NUT
Description : LPTA SL CH HEAD SCREW M5X20 WITH NUT()
Specification : SL. CH. HEAD SCREW M5X20L IS1366-4.8 Part No. 11390805-201 WITH HEX NUT M5 IS:1364 Part No. 1205-320050-6 (QTY 2 PER SET)
Specification : Bracket Front Bumper Bar Drg./Part No. F-0430212(V1)
C
Nonestab
2) FUEL CHANGE OVER UNIT[90]()
Specification : FUEL CHANGE OVER UNIT
C
Estab
3) DISTANCE PIECE FOR L LOGO[90]()
Specification : DISTANCE PIECE FOR "L" LOGO DISTANCE PIECE FOR " L " LOGO. DRG./PART NO.F7617260-HASE.
C
Nonestab
4) BKT REVERSE BEEPER[90]()
Specification : BKT. REVERSE BEEPER, PART NO./DRG NO. F7195914 A
C
Nonestab
5) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Nonestab
6) BRACKET FOR AXLE LAMP[90]()
Specification : AS PER COMPONENT DRG. NO. F-0420814(HB)
C
Nonestab
7) Drinking Water Tank Part No X4110910E for Stallion[90]()
Specification : As per specification / drg. no. X4110910E
C
Nonestab
8) STRAP END BOLT[90]()
Specification : STRAP END BOLT(102-18), PART NO. X-3548915-C
C
Nonestab
9) BKT FILTER MTG[90]()
Specification : BKT FILTER MTG, PART NO. X-7115314
C
Nonestab
10) SUB ASSY OF AIR RESERVOIR BKT[90]()
Specification : S/A OF AIR RESERVOIR BKT., PART NO.B-3910101(HA)
C
Nonestab
11) BRACKET AGB[90]()
Specification : BRACKET -AGB (102-04), PART NO. X0472614-V1
C
Nonestab
12) SUB ASSY OF STRAP FUEL TANK MOUNTING[90]()
Specification : S/A OF STRAP FUEL TANK MOUNTING, PART NO. X-3042214-#
25) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]()
Specification : DRAWING NO. CQA(GS)/US/562
C
Estab
26) SHACKLE WITH PULLY[2110060001]()
Specification : SPECN/DRG.NO: ADRDE/302(c).
R
Estab
27) PULLY MIG-29[2110019021]()
Specification : ADRDE/1235-SA1(d)
R
Estab
28) NIV PACK FRAME[2110008014]()
Specification : DRAWING NO.CQA(GS)/US/557
C
Estab
29) BUCKLE D SHAPED (PTR-M)[2102053921]()
Specification : SPECN.NO.IND/GS/1798
C
Estab
30) GROMMET WITH WASHER (13.5 MM)[2110025025]()
Specification : DRAWING NO. ADRDE/1402-03-003
R
Estab
31) GROMMET WITH WASHER 11mm[2110060007]()
Specification : SPECIFICATION :DRAWING NO ADRDE/306(a)
R
Estab
32) RIP CORD WITH PIN[2110019006]()
Specification : SPECN.NO.ADRDE/1235-A9(b).
R
Estab
33) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]()
Specification : DRAWING NO JSS: 5340-05:2014
C
Estab
34) PULLEY FOR B.P SU-30[2110025022]()
Specification : DRG.NO.ADRDE/1402-01--002
R
Estab
35) A4/5315-004372 LOCKING PIN FOR SNAP HOOK FOR PP TYPE PTR-R 7.30M[2110340003]()
Specification : SPCN.NO.IND/GS/1826(a)
R
Estab
36) METALLIC SLIDE FASTENER HEAVY DUTY 457 MM LONG OG[2111659013]()
Specification : SPECH. NO.: IS : 3148
R
Estab
37) Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute[2110080016]()
Specification : CQA(GS)/US/563
R
Estab
38) 5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R[2110008501]()
Specification : SPCN.NO.IND/GS/1815 (b)
R
Estab
39) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I/COE-8017)[2110008017]()
Specification : CQA(GS)/US/564
R
Estab
40) EYELET WITH WASHER 7mm[2110060008]()
Specification : SPECIFICATION :DRAWING NO ADRDE/307(a)
R
Estab
41) METAL PULLEY MKII[2110060022]()
Specification : ADRDE/1449 except that : new material i.e X2CrNi19-11 as per specification BS EN10216-5:2004
R
Nonestab
42) RIP CORD ASSEMBLY (FOR PILOT PARA JAGUAR A/C)[2110075018]()
Specification : SPCN.NO.AS PER ADRDE/1453(a)
R
Nonestab
Category : p
Grade : Grade II
Size :
S
2795
Suresh Engineerring Company
TS 97 SIDCO, Guindy, Thiru Vi Ka Industrial Estate Chennai Tamil Nadu
PIN1 : 600032
Phone No. : 22254850 GSTIN : 33AMWPS9761Q1ZM
Specification : IS: 1089:1986(REV.2) , OFN/0003/OLEUM, DT.24.12.2014
R
Nonestab
Category : s
Grade : Grade II
Size :
M
2797
COMMERCIAL ENGINEERS AND BODY BUILDERS COMPANY LTD
124 NAPIER TOWN NAPIER TOWN JABALPUR Madhya Pradesh
PIN1 : 482001
Phone No. : 2661336 GSTIN : 23AAACC5823E1Z7
1) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Estab
2) Load Body Accessories[90]()
Specification : As per specification / drg.
C
Estab
3) Load Body Complete Drg No B6510604 C 1 for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Estab
Category : p
Grade : Grade II
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Assy Mounting Spare Wheel Carrier[90]()
Specification : ASSY MTG SPARE WHEEL CARRIER (WITHOUT LIFTING UNIT) (CONSISTING OF COMPONENTS AS PER LIST ATTACHED)
C
Nonestab
2) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
1) SUPPLY OF EPD FUZE PCBS(PCB-I& PCB-II)ASSEMBLED WITH ALL ELEC TRONIC COMPONENTS AS PER BILL OF MATERIAL AND GERBER FILES ENCLOSED AS ANNEXURE-'A' AND ANNEXURE-'B' RESPECTIVELY.[99]()
Specification : SUPPLY OF EPD FUZE PCBS(PCB-I&
PCB-II)ASSEMBLED WITH ALL ELEC
TRONIC COMPONENTS AS PER BILL
OF MATERIAL AND GERBER FILES
ENCLOSED AS ANNEXURE-'A' AND
ANNEXURE-'B' RESPECTIVELY.
