Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF SPECIAL ERA PANEL SIZE 278X215X0.25MM SPEC. HEMRL/ED/PS/286, HEMRL DRG. NO. 1516 DETL. 2
R
Nonestab
3) TEFLON SHEET POUCH 300[42]()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF STD. AND TAPERED ERA PANEL, SIZE-300X278X0.25MM, SPEC HEMRL/ED/PS/286, HEMRL DRG. NO 1515 DETL.2
R
Nonestab
4) TEFLON SHEET POUCH 350[42]()
Specification : TEFLON SHEET (CUT TO SIZE) FOR TOP ATTENUATOR POUCH, SIZE 350X170X0.25MM, SPEC.NO. HEMRL/PS/286, HEMRL DRG.NO. 1518 DETL.1
R
Nonestab
5) TEFLON SHEET POUCH 360[42]()
Specification : TEFLON SHEET (CUT TO SIZE) FOR POUCH OF TOP REA PANEL, SIZE 360X180X0.25MM SPEC. HEMRL/PS/286, HEMRL DRG. NO 1517 DETL .1
Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SLEEVE DRG Point number QX 655 LF 2103716522
Description : SLEEVE DRG Point number QX 655 LF 2103716522()
Specification : SLEEVE DRG Point number QX 655 LF 2103716522
R
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) PLUG RETAINING 041 FOR MULTIMODE
Description : PLUG RETAINING 041 FOR MULTIMODE()
Specification : AS PER SPECIFIED SPCN. & DRG.
C
Estab
2) BLAST CUP 036 FOR MULTIMODE GRD.
Description : BLAST CUP 036 FOR MULTIMODE GRD.()
Specification : AS PER SPECIFIED SPCN. & DRG.
C
Estab
3) FRAGMENTING SLEEVE TBRL MMG H MK1 9911358309
Description : FRAGMENTING SLEEVE TBRL MMG H MK1 9911358309()
Specification : FRAGMENTING SLEEVE TO DRG NO TBRL/MMG-H/MK-1/038/R0 ASSEMBLED WITH FRAGMENTS TO DRG NO TBRL/MMG-H/MK-1/047/R0 HYPOLENE COVER MOULDED IN SITU FRAGMENT JACKET TO DRG NO TBRL/MMG-H/MK-1/033/R0
C
Estab
4) MAGAZINE HOLDER 040 FOR MULTIMODE
Description : MAGAZINE HOLDER 040 FOR MULTIMODE()
Specification : AS PER SPECIFIED SPCN. & DRG.
C
Estab
5) FUZE BODY ASSY EMPTY FOR MULTIMODE
Description : FUZE BODY ASSY EMPTY FOR MULTIMODE()
Specification : AS PER SPECIFIED DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) SLIPPING RING (6770430100)
Description : SLIPPING RING (6770430100)()
Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01
1) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529
Description : 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) CUP CLOSING 025 MULTIMODE GRD.
Description : CUP CLOSING 025 MULTIMODE GRD.()
1) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529
Description : 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
R
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524
Description : 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524()
Specification : 1ST SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.1.Rivet for Top Plate (Qty.-2 NOS.) TBRL/MMG-H/MK-1/016/R0 2.Plunger Spring TBRL/MMG-H/MK-1/029/F0 3.Conical spring (Qty-2nos) TBRL/MMG-H/MK-1/030/R0 4.Safety Pin, TRD-1-1-3047
R
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385
Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19
C
Nonestab
5) PLUG FOR 81MM AT AL[62]()
Specification : DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994
C
Nonestab
6) DELAY ELEMENT FOR 81MM SMOKE 3D6[62]()
Specification : NO. CIA/AMN/2498,PART NO. IQX868
C
Nonestab
7) PROPELLENT CUP FOR 81MM SMOKE 3D6[62]()
Specification : DRG. NO. 4-26941 013
C
Nonestab
8) SECURING NUT FOR 81MM 3D6[62]()
Specification : NO. 4-26941 015
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]()
Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]()
Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
C
Nonestab
2) Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun[74]()
Specification : Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun
C
Nonestab
3) Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun[74]()
Specification : Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun
C
Nonestab
4) Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun[74]()
Specification : Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun
C
Nonestab
5) Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun[74]()
Specification : Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun
C
Nonestab
6) ARM COVER RIGHT[74]()
Specification : ARM COVER RIGHT (View) AS PER.DGRNO.Y25686A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
7) BRACKET TOP COVER[74]()
Specification : BRACKET TOP COVER (View) AS PER.DRG.NO.Y25687A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
8) BRACKET BASKET RIGHT WELD[74]()
Specification : BRACKET, BASKET,RIGHT, WELD/Y19378A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) BRACKET BASKET LEFT WELD[74]()
Specification : BRACKET, BASKET, LEFT, WELD/Y19376A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
10) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
11) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
12) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
13) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()
Specification : As per TE
C
Nonestab
14) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
2753
M/S BALMER LAWRIE & CO. LTD.
ASCOT CENTRE, UNIT NO. 101-103, D.P ROAD ANDHERI (EAST) MUMBAI MAHARASHTRA
PIN1 : 400099
Phone No. : 02228266707 GSTIN :
27AABCB0984E1ZV
1) ALL ITEM COMPONENTS and MATERIAL REQUIRED FOR END STORE 84MM HEAT 551
Description : ALL ITEM COMPONENTS and MATERIAL REQUIRED FOR END STORE 84MM HEAT 551()
Specification : ALL ITEM COMPONENTS and MATERIAL REQUIRED FOR END STORE 84MM HEAT 551
1) CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GR 080M40 IN HOT ROLLED AND COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS 15 PERCENT MAX SHORTS DOWN TO 2 TO 3 METRES PERMITTED SIZE 30 00 MINUS 0 052 MM DIA[01]()
Specification : CARBON STEEL ROUND BARS. TO SPECN. BS:970-PT.I-(1983) GR.080M40 IN HOT ROLLED +COLD DRAWN CONDITION IN STRAIGHT LENGTH OF 3 MTRS. (15 % MAX SHORTS DOWN TO 2-3 METRES PERMITTED ) SIZE: 30.00 - 0.052 MM DIA.
R
Estab
2) CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE 080M40 CONDITION NORMALIZED IN STRAIGHT LENGTH OF 3 METERS WITH 10PERCENT SHORTS DOWN TO 2 3 METERS SIZE 35 0 POINT1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUNDS TO SPECN BS: 970 PT.I-1983 GRADE 080M40 CONDITION NORMALIZED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METERS SIZE: 35.00 – 0.1 MM DIA
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND TO SPECN BS 970 PT I 1983 GR 070M20 HAVING STRAIGHT LENGTH OF 3 MTRS SIZE 25 POINT 4 MINUS 0 POINT 1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUND BAR IN NORMALISED COND. TO SPECNBS:970-PT.I-1983 GR.070M20 HAVING STRAIGHT LENGTH OF 3 MTRS. WITH 10% SHORTS DOWN TO 2-3 MTRS. SIZE: 25.4 -0.1 MM DIA
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN BS 970 1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19 MINUS 0 POINT 08 MM DIA[00]()
Specification : BRIGHT FINISHED COLD DRAWN CARBON STEEL ROUNDS TO SPECN:BS: 970-1983 GRADE 070M20 IN NORMALISED CONDITION STRAIGHT LENGTH OF 3 METERS SIZE 19.00 - 0.08 MM DIA
