Specification : CASTOR WHEEL ASSY TO PART NO.1132630
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 20mm Bolt Assembly to Drg No 44P03000 required for AMR[20]()
Specification : 20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 20mm Bolt Assembly to Drg No 44P03000 required for AMR[20]()
Specification : 20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) JOINT BALL REAR TO D S CAT NO M2 1010 000626 P T NO IAN 340SA ALONG WITH ALL DETAILS[90]()
Specification : JOINT BALL REAR TO D. S. CAT. NO. M2/1010- 000626/ P. T. NO. IAN- 340SA ALONG WITH ALL DETAILS
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COMPENSTATOR PISTON TO DRG NO 44P 02007 ST REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
2) THROTTLE TO DRG NO 44P 02008 ST REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
3) PISTON HOT TO DRG NO 44P 02010 ST REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
4) PISTON ROD TO DRG NO 44P 02012 ST 2 REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
5) EJECTOR TO DRG NO 44P 03006 ST 2 REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
6) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
7) MAGAZINE CATCH TO DRG NO 44P 04004[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
8) BARREL LATCH TO DRG NO 44P 04005[70]()
Specification : AS PER OFB REQUIREMENT
C
Nonestab
9) SLEEVE KEY TO DRG NO 44P 04008ST 2[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
10) TRIGGER TO DRG NO 44P 06008 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
11) SAFETY PLATE TO DRG NO 44P 06016 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 A3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 A3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN FIXING GAS CYLINDER TO D S CAT NO 5315 001760 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1245[70]()
Specification : AS PER D.S CAT NO.5315-001760 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1245)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUG GAS CYLINDER ASSEMBLY AS PER DRG NO TEND 1905 ICR 66 SA FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQD FOR RIFLE 7POINT62MM 1A1[70]()
Specification : AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 A3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 A3 FOR 40mm MGL
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN FOR FRONT SIGHT BLOCK AND GAS PORT BLOCK AS PER DRG No K 1211 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUG GAS CYLINDER ASSEMBLY AS PER DRG NO TEND 1905 ICR 66 SA FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQD FOR RIFLE 7POINT62MM 1A1[70]()
Specification : AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
C
Estab
2) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
3) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
4) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
5) Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR[70]()
Specification : Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL[70]()
Specification : As per Drawing and specification
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN ALIGNING TO DRG. No. 30P 3062[70]()
Specification : AS PER DRG OF PIN ALIGNING TO DRG. No. 30P 3062
C
Nonestab
2) RANGE PLATE LH TO DRG. NO. 30P 4008[70]()
Specification : AS PER DRG OF RANGE PLATE LH TO DRG. NO. 30P 4008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CYLINDER TO DRG NO 44P 02001 STAR[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
2) ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL[70]()
Specification : ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL
C
Nonestab
3) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()
Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030
C
Nonestab
4) MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
5) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
6) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
7) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
C
Estab
2) FRAME WELDING ASSEMBLY TO DRG NO 44P05100ST REQUIRED FOR AMR[70]()
Specification : AS PER OFT REQUIREMENTS
C
Nonestab
3) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Estab
4) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Estab
5) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
6) 20MM BOLT LEVER 44P 03002[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
7) 14 5MM BOLT LEVER 44P 14014[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
8) BUFFER FORK 44P 04103[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
9) CLAMP NUT 44P 04007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
10) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
11) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
12) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
13) HAMMER TO DRG NO 44P06013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
14) RETAINING BLOCK TO DRG NO 44P 06104[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
15) 20MM CAST CARTRIDGE ASSEMBLY TO DRG NO 44P03021[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
16) 14 5MM CAST CARTRIDGE EXTRACTOR TO DRG NO 44P14033[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
17) 20MM FIRING PIN TO DRG NO 44P03013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
18) 14 5MM FIRING PIN TO DRG NO 44P14009[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081001771 LAYER SEAT WITH MTG PLATFORM ASSEMBLY TO PT NO 129837[90]()
Specification : LAYER SEAT WITH MTG.PLATFORM ASSEMBLY TO PT.NO.1129837.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL[70]()
Specification : AS PER DRG OF STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]()
Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR
C
Nonestab
2) 20MM CAST CARTRIDGE ASSEMBLY TO DRG NO 44P03021[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Estab
3) 14 5MM CAST CARTRIDGE EXTRACTOR TO DRG NO 44P14033[70]()
Specification : AS PER OFT REQUIREMENTS
R
Estab
4) 14 5mm BOLT BODY TO DRG NO 44P 14010[70]()
Specification : AS PER OFT REQUIREMENTS
C
Nonestab
5) 20MM BOLT BODY TO DRG NO 44P 03004[70]()
Specification : AS PER OFT REQUIREMENTS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SAFETY PLATE TO DRG NO 44P 06016 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Estab
2) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Estab
3) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Estab
4) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Estab
5) HAMMER TO DRG NO 44P06013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Estab
6) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112637 PISTON BOF 5065970[90]()
Specification : PISTON BOF 5065970
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) MODIFICATION TO STALLION DRAG LINK FOR MPV[90]()
Specification : MODIFICATION TO STALLION DRAG LINK DRG NO. 640-04-1106-1/A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) MODIFICATION TO STALLION DRAG LINK FOR MPV[90]()
Specification : MODIFICATION TO STALLION DRAG LINK DRG NO. 640-04-1106-1/A
C
Nonestab
2) SPRING CUP LH DRAG LINK ASSY[90]()
Specification : SPRING CUP LH DRAG LINK ASSY
C
Nonestab
3) SPRING CUP RH DRAG LINK ASSY[90]()
Specification : SPRING CUP RH DRAG LINK ASSY
C
Nonestab
4) DRAG LINK[90]()
Specification : DRAG LINK DRAG LINK PT.NO.X3219915 ISSUE B
C
Nonestab
5) LPTA Assy Tie Rod[90]()
Specification : Assy Tie Rod Part No X 261433800103
C
Nonestab
6) TIE ROD ASSY[90]()
Specification : TIE ROD ASSY PT NO. B2594502
C
Nonestab
Category : p
Grade : Grade III
Size :
S
2642
Jai Durga Engineering Works
Plot No. 234, Pkt- I, Sector -3, DSIIDC, Bawana, New Delhi-110039 Pkt-I New Delhi Delhi
PIN1 : 110039
Phone No. : 27762312 GSTIN : 07AATPS7876B1Z0
2) PLASTIC MOULDED ITEMS FROM 5 GRAMS TO 5.5 KILOGRAMS[60]()
Specification : AS PER AHSP/ AFK SPECIFICATION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) HOUSING TRIGGER OF LMG BELT FED[70]()
Specification : HOUSING TRIGGER OF LMG 7.62MM BELT FED, DRG NO.SK-5817.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Trigger Rear with Machining Route[70]()
Specification : Trigger Rear with Machining Route. Drg.No.0204-03-02-02-18-013-00DC
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MONOPOD ASSEMBLY FOR LMG[72]()
Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Blank for Piston extension stage VI[01]()
Specification : Blank for Piston Extension (Stage VI) to Drg.No. SKJVPC 730* for JVPC 5.56MM Note:-Raw material will be supplied by SAF on freight to pay basis against the B/G through L.F.NO.0412001042. (I/Code-0132089519)
C
Nonestab
2) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
Specification : BRACKET SUPPORTING TO DRG. NO. CQA (I) 393/37 WITH OUT SURFACE TREATMENT RAW MATERIAL WILL BE SUPPLIED BY SAF AGAINST BANK GUARANTEE L. F. NO. 0145007056
Specification : CHANNEL RIGHT TO DRG NO. AKC-03/7BL FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GUARD HAND ASSEMBLY TO DS CAT NO1005 007775[70]()
Specification : GUARD HAND ASSEMBLY TO DS CAT NO.1005-007775 DC (I) NO. 26520-SA DT. 10.07.10 IN FINISHED CONDITION WITH HAND GUARD CQA(SA)SK-996,DSCATNO.1005-560844,DC(I)NO26635-SA,DT,12.5.12NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR COD
C
Nonestab
2) GRIP PISTOL TO DS CAT NO 1005 560706[70]()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011.
C
Nonestab
3) GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5 56 IN FINISHED CONDITION[70]()
Specification : GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GUARD HAND ASSY UPPER STEEL STRIP[70]()
Specification : GUARD HAND ASSY. UPPER (STEEL STRIP) AS PER DRG NO./DS CAT NO. 1005-560046 DC (I) NO.26533-SA DT.31.07.10 IN FINISHED CONDITION. NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695, TO SPECN. IS 5:2007.
C
Nonestab
2) GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010[70]()
Specification : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56[70]()
Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)
C
Nonestab
2) MULTI TOOTH LOCK WASHER[70]()
Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED.
C
Nonestab
3) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)[72]()
Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
C
Nonestab
4) MAGAZINE PLASTIC FOR AMOGH 5 56MM IN FINISHED CONDITION[70]()
Specification : MAGAZINE PLASTIC, 30 RDS TO DRG NO. AKC-18*2 FOR AMOGH 5.56MM IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PLUNGER HOD FOR CARBINE 5 56 MM[70]()
Specification : PLUNGER HOD TO DRG NO.AKC-08/5 FOR CARBINE5.56MM IN FINISHED CONDITION
C
Nonestab
2) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010
Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1
C
Nonestab
2) HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.[70]()
Specification : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ROD COCKING FOR JVPC[70]()
Specification : Rod Cocking for JVPC drg. No. 0204.03-04-00-01-012-00DA (I/Code-7012470462)
C
Nonestab
2) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLOSING CUP for JVPC[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Buffer for JVPC[70]()
Specification : Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Plate Armature in finished condition[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I)-393/36 to DS CAT No. 6115-001170
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
2) BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB[70]()
Specification : BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTT ASSEMBLY FOR RIFLE 5.56 MM[70]()
Specification : Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838
Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007.
C
Nonestab
2) BUTT PLASTIC FOR AKC 14[70]()
Specification : BUTT PLASTIC TO DRG NO.AKC-14 FOR CARBINE 5.56MM IN FINISHED CONDITION.
C
Nonestab
3) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Hammer for JVPC[7012470236]()
Specification : HAMMER FOR JVPC 5.56MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06[70]()
Specification : DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER[70]()
Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STOP PIN, BARREL LOCKING NUT TO DS CAT NO. 5315-004847 DC(I) NO. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION.[70]()
Specification : STOP PIN, BARREL LOCKING NUT TO DS CAT NO. 5315-004847 DC(I) NO. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION.
4) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]()
Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA
C
Nonestab
5) Lower Hand Guard Assembly for CQB 5 56x45 MM[7012670011]()
Specification : Lower Hand Guard Assembly for CQB 5 56x45 MM DRG No 1901 01 01 00 06 000 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
2) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]()
Specification : As per Drawing
E
Nonestab
3) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Nonestab
4) BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR[70]()
Specification : BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR
C
Nonestab
5) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Nonestab
6) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
C
Nonestab
7) POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050[70]()
Specification : POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
C
Nonestab
8) ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL[70]()
Specification : ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Estab
2) CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42 03 015 C3015[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015) "
C
Nonestab
3) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
C
Estab
4) POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050[70]()
Specification : POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050
C
Estab
5) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Nonestab
6) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Estab
2) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]()
Specification : As per Drawing
E
Estab
3) EXTENDABLE BUTT ASSY AS PER DRG No K 5000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 5000 WITH FIRMS MATERIAL
C
Estab
4) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
C
Estab
5) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Nonestab
6) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
7) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
8) 20MM MAGAZINE ASSY TO DRG NO 10000 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
9) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Estab
10) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Estab
11) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()
Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BAYONET 2A FOR 7point62mm[70]()
Specification : TE.NO. D182 G5 2344
C
Nonestab
2) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91[70]()
Specification : AS PER D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718, 5305-005008, 5310-003171
C
Estab
3) PIN COCKING HANDLE TO D S CAT NO 5315 009175 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1288 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
C
Nonestab
4) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
5) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Estab
6) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Estab
7) BUTT FRAME ASSY AS PER DRG NO K 6006 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K 6006
WITH FIRM’S MATERIAL
C
Nonestab
8) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Estab
9) BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL[70]()
Specification : BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL
C
Nonestab
10) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Estab
11) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Estab
12) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Estab
13) 20MM MAGAZINE ASSY TO DRG NO 10000 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Estab
14) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Estab
15) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()
Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030
C
Estab
16) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
17) Grip Pistol Assembly as per drawing No 27P 6500[70]()
Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1
C
Nonestab
18) Guard Hand Left Right Assembly Polymers[11]()
Specification : Guard Hand Left Right Assembly Polymers
Specification : BIPOD ASSY OF LMG 7.62MM BELT FED as per drawing No.
1804 01 08 00 00 000 00DA
C
Nonestab
5) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]()
Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA
C
Nonestab
6) Lower Hand Guard Assembly for CQB 5 56x45 MM[7012670011]()
Specification : Lower Hand Guard Assembly for CQB 5 56x45 MM DRG No 1901 01 01 00 06 000 00DA
C
Nonestab
7) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA[70]()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
C
Nonestab
8) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
9) PISTON FOR JVPC ALFA[70]()
Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GUARD HAND UPPER ASSY FOR LMG 5 56 MM IN FINISHED CONDITION[70]()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GUARD HAND UPPER ASSY FOR LMG 5 56 MM IN FINISHED CONDITION[70]()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.
C
Nonestab
2) BIPOD ASSY OF LMG BELT FED[70]()
Specification : BIPOD ASSY OF LMG 7.62MM BELT FED as per drawing No.
1804 01 08 00 00 000 00DA
C
Nonestab
3) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]()
Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA
C
Nonestab
4) Lower Hand Guard Assembly for CQB 5 56x45 MM[7012670011]()
Specification : Lower Hand Guard Assembly for CQB 5 56x45 MM DRG No 1901 01 01 00 06 000 00DA
C
Nonestab
5) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA[70]()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
C
Nonestab
6) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PISTOL GRIP FOR JVPC
Description : PISTOL GRIP FOR JVPC()
Specification : PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Estab
2) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Estab
3) 20MM MAGAZINE ASSY TO DRG NO 10000 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Estab
4) CARRYING HANDLE ASSY TO DRG NO 11000 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
5) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Upper Hand Guard Assy for JVPC
Description : Upper Hand Guard Assy for JVPC()
Specification : Upper Hand Guard Assy for JVPC DRG No. 0204-03-04-00-08-000-00DA
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) RETAINING PIN PISTON FOR MAG[70]()
Specification : RETAINING PIN, PISTON TO DS CAT NO. 5315-001530 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN RETAINING HANDLE COCKING SLIDE for MAG[70]()
Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN DISASSEMBLY FOR REVOLVER SIDE SWING[70]()
Specification : PIN DISASSEMBLY FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-06/4 SW.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PLASTIC MOULDED BOX SK-4745*2[14]()
Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]()
Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA
Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1
C
Estab
3) BUTT ASSEMBLY FOR RIFLE 5.56 MM[70]()
Specification : Butt Assembly for Rifle 5.56MM to DS CAT NO. 1005-560064 with Butt Plastic to CQA(SA) SK-999 DS CAT NO.1005-560838
Note: The Item Will Be In Dark Blue Gray Colour, Colour Code-695 to Specn. IS 5:2007.
1) BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF[70]()
Specification : BUTT ARM MOULDING DRG. NO. 0204-03-03-03-18-000-00DF
C
Estab
2) 12.GRIP PISTOL FOR SUB M/C GUN DRG NO:1005-000893[70]()
Specification : AS PER DRG.
C
Estab
3) GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5 56 IN FINISHED CONDITION[70]()
Specification : GRIP PISTOL ASSY DRG NO AKC 11 FOR CARBINE 5.56 IN FINISHED CONDITION.
C
Estab
4) CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
C
Estab
5) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
C
Estab
6) GRIP ASSY OF REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.
8) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
9) Guide Cocking Handle[70]()
Specification : Guide Cocking Handle (SKM-1013) for MAG7.62MM as per modified drawing
C
Estab
10) Hand Guard Assembly for JVPC[70]()
Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw
C
Estab
11) GUIDE COCKING HANDLE (SKM-1013) FOR MAG 7.62MM AS PER MODIFIED DRAWING[70]()
Specification : GUIDE COCKING HANDLE (SKM-1013) FOR MAG 7.62MM AS PER MODIFIED DRAWING
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]()
Specification : AS PER OFT REQUIREMENTS
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTT IN BLACK COLOUR FOR LMG[70]()
Specification : BUTT TO DRG NO CQA SA SK 973 DC I NO 26953 SA DT01 10 16 DS CAT NO 1005 560705
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GUARD HAND UPPER ASSY FOR LMG 5 56 MM IN FINISHED CONDITION[70]()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA, DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDIT ION.
C
Nonestab
2) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]()
Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA
C
Nonestab
3) Lower Hand Guard Assembly for CQB 5 56x45 MM[7012670011]()
Specification : LOWER HAND GUARD ASSY. FOR CQB 5.56X45MM DRG. NO. 1901 01 07 00 00 000 00DD
C
Nonestab
4) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
5) CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA[70]()
4) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 FOR RIFLE 5.56MM INSAS[70]()
Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TO ARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)
C
Nonestab
5) BUTT (PLASTIC) (DARK BLUE) FOR RIFLE 5.56MM INSAS.[70]()
Specification : BUTT(PLASTIC),(D/BLUE) TO DS CAT NO.1005-560838(DC-26635-S) SPECN.NO.ARDE/SPECN/536(PROV). FOR RIFLE 5.56MM INSAS.
C
Nonestab
6) GUARD HAND ASSY. (UPPER) (STEEL STRIP) FOR RIFLE 5.56MM INSAS.[70]()
Specification : GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:- 1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) & 3)5320-022259(DC-26504-SA),(2-NOS.) FOR RIFLE 5.56MM INSAS.
C
Nonestab
7) HANDLE CARRYING ASSY.(MOULDING) (DARK BLUE) FOR RIFLE 5.56MM INSAS.[70]()
Specification : HANDLE CARRYING ASSY.(MOULDING)(DARK BLUE) TO DS CAT. NO. 1005-560850(DC-26635-SA).CONSIST OF:1005-007829(DC-23971-SA)(ALONG WITH LEVER REVETING ASSY. TO DS CAT NO.1005-007818 (DC 23982-SA). CONSIST OF: 1005-007816 & 5315-009330. SPECN.NO
2) BODY ASSY 4 26941 060 FOR 81MM SMK LF 9911355970[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PRIMARY CARTRIDGE KEY 1398 000099[90]()
Specification : PRIMARY CARTRIDGE KEY TO DS CAT NO 1398-000099, PT NO. AMG 72924.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081001243 LINKAGE SYSTEM PART NO 1137083[90]()
Specification : LINKAGE SYSTEM AS PER THE DESCRIPTION AND BILL OF MATERIAL
(enclosed) OF PART NO 1137083.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) RECOIL INDICATOR TO DRAWING NO 1144034[90]()
Specification : RECOIL INDICATOR TO DRAWING NO.1144034
C
Nonestab
2) PROTECTOR LEFT TO DRAWING NO 1146577[90]()
Specification : PROTECTOR LEFT TO DRAWING.NO.1146577
C
Nonestab
3) PROTECTOR RIGHT TO DRG NO 1146579[90]()
Specification : PROTECTOR RIGHT TO DRG.NO.1146579
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BUSHING FRONT DRG 2A26 09 22[90]()
Specification : BUSHING FRONT DRG 2A26 09 22
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987[90]()
Specification : PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SHEAVE OUTER TO PART NO 4018739[90]()
Specification : SHAVE OUTER TO PART NO 4018739
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 5060095 5060095 Y[90]()
Specification : BUSH TO DRG NO 5060095 5060095 Y
C
Nonestab
2) BUSH BOF 6164802[90]()
Specification : BUSH BOF 6164802
C
Nonestab
3) BUSH BOF 6104225 Y[90]()
Specification : BUSH BOF 6104225 Y
C
Nonestab
4) BUSH TO PART NO BOF 6115890[90]()
Specification : BUSH TO PART NO BOF 6115890
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-104 MK-1 STEEL DD(L)11325[65]()
Specification : BOX M-104 MK-1 (STEEL) TO DESIG.REF. DD(L) 11325, SHT-1 DRG PART NO SV-22-A DC NO.35994-A DT.12-8-95.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865[90]()
Specification : MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865
C
Nonestab
2) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879[90]()
Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)[65]()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
P
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PLATE AS PER DRAWING NO 5183023[90]()
Specification : PLATE AS PER DRAWING NO 5183023
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889[90]()
Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PLATE AS PER DRAWING NO 5175363[90]()
Specification : PLATE AS PER DRAWING NO 5175363
C
Nonestab
2) PLATE AS PER DRAWING NO 5175364[90]()
Specification : PLATE AS PER DRAWING NO 5175364
C
Nonestab
3) PLATE AS PER DRAWING NO 5175362[90]()
Specification : PLATE AS PER DRAWING NO.5175362
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570250010 PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802[65]()
Specification : PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802
Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1
C
Nonestab
4) S A OF FUEL TANK RH 160 LITRE PART No B5028201 V2[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
5) S A OF FUEL TANK LH 160 LITRE PART No B5028202 V2[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081005851 COMPLETE BATTERY BOX FOR APU COMPRISES OF PLATE AND COVER PLATE AS PER DRG NOS GCF 50 40433 AND GCF 50 40434[90]()
Specification : COMPLETE BATTERY BOX FOR APU COMPRISES OF PLATE AND COVER
PLATE AS PER DRG.NOS. GCF/50/40433 AND GCF/50/40434.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRAME BASKET WELD View AS PER DRG noY19388A 00 FOR MECH SRU ASSY OF SRCG[74]()
Specification : FRAME, BASKET, WELD (View) AS PER DRG.no.Y19388A-00. FOR MECH SRU ASSY OF SRCG.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL[70]()
Specification : As per Drawing and specification
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
2) FILLER MAGAZINE 1A TO D S CAT No 1005 001738 D C No 17584 SA DATED 20 05 83 FOR RIFLE 7POINT62mm 1A1 FULLY FINISHED WITH FIRMS MATERIAL[70]()
Specification : AS PER D.S.CAT.No.:1005-001738 D.C.No. 17584-SA. DATED: 20/05/83. (FOR RIFLE 7.62mm 1A1) (FULLY FINISHED WITH FIRM'S MATERIAL
E
Nonestab
3) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Estab
4) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CLAPPER PIN ASSY FOR MULTIMODE GR LF 9911357706[99]()
Specification : CLAPPER PIN ASSEMBLY TO DRG NO.TBRL/MMG-H/MK-I/A41/RO.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]()
Specification : MANTLE TO DRG.NO.TRD-2-2-2271.
C
Nonestab
2) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)[99]()
Specification : SPACER TO DRG.NO.TRD-2-2-2273.
C
Nonestab
3) SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263[99]()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
Specification : CIRCULAR BRASS LABEL FOR 1000 LBS BOMBS DRG.NO.-KHS-2-1-0359.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081483 BOX APPRATUS PULLING BACK GUN 2A TO DRG NO 8115 000184 ICM 1589[90]()
Specification : BOX APPRATUS PULLING BACK GUN 2A TO DRG. NO. 8115-000184/ICM -1589
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
2) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Nonestab
3) SRGM 76 62 MM PRIMER SUB ASSY EMPTY LF 9911358760[99]()
Specification : SRGM 76/62 MM PRIMER SUB-ASSY.(EMPTY) CONSISTING FOLLOWING COMPONENTS/SUB ASSY. (1) PRIMER BODY TO DRG.NO. CNA(OF) SK 435/1 (2) ANVIL TO TO DRG.NO. CNA(OF) SK435/2 (3) CAP EMPTY TO DRG.NO. CNA(OF) SK 435/3 (4) Pb-Sn FOIL TO DRG.NO. CNA(OF
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CATCH LOCK ASSY DRG NO.IA-1053 4 CO[99]()
Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SUPPORTRING RING PART NO 5211870 LF 9911358417
Description : SUPPORTRING RING PART NO 5211870 LF 9911358417()
Specification : SUPPORTING RING PART NO. 5211870 TO OEM DRG.NO.304094939/ TRD.DRG.NO 2.2.2371
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081002749 EJECTOR PROJECTILE MODIFIED DRG NO GCF 50 39423[90]()
Specification : AS PER TE NO. 160442FHFO ON E-PROC.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SPACER TO PART NO 5050983[90]()
Specification : SPACER TO PART NO 5050983
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157
Description : ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CARTG CLIP FOR 76 62 SRGM LF 9911357314
Description : CARTG CLIP FOR 76 62 SRGM LF 9911357314()
Specification : CARTG. CLIP ASSY TO DRG.NO. TRD-2-1-1992.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PARTITION TRD 1-2-2279 (84MM 551)[99]()
Specification : PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALUMINIUM DISC,THICK .05MM,DIA 10MM[99]()
Specification : ALUMINIUM(DISC)COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP and PIN FOR 84MM HEAT 551 LF 9911358084[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Nonestab
2) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321[99]()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
C
Nonestab
3) SLIDING DISC PART NO 6413413 LF 9911358440[99]()
Specification : SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627
R
Nonestab
4) SLIDING DISC PART NO 6416336 LF 9911358402[99]()
Specification : SLIDING DISC PART NO.6416336 TO OEM DRG.NO.304101511/ TRD.DRG.NO 1.2.2427
R
Nonestab
5) Closing Cup Part No 6413187 For 84 mm smoke 469C LF 9911358443[99]()
Specification : OEM DRG No 301177898 / TRD DRG No 2 2 2738
C
Nonestab
6) 84MM CARTRIDGE CASE 502 LF 9911358483[99]()
Specification : 84MM CARTRIDGE CASE 502 PART NO. 4106869
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PRIMARY CARTRIDGE KEY 1398 000099[90]()
Specification : PRIMARY CARTRIDGE KEY TO DS CAT NO 1398-000099, PT NO. AMG 72924.
C
Nonestab
2) RETAINER TO PART NO 6108892[90]()
Specification : RETAINER TO PART NO 6108892
C
Nonestab
3) KNOB TO DRG NO 6108161[90]()
Specification : KNOB TO DRG NO 6108161
C
Nonestab
4) 9073000994 SEALING RING TO DRG NO 2A46M 07 70 COPPER M2 IS 191 PT III 1980 FRTP 2[90]()
Specification : SEALING RING TO DRG.NO.2A46M-07-70 COPPER M2 IS:191 PT.III-1980-FRTP-2
C
Nonestab
5) 9081002742 GAS FILLER UNIT ARTICLE NO 1120554 REF DRG NO GCF 50 39951A[90]()
Specification : 9081002742 GAS FILLER UNIT ARTICLE NO 1120554 REF DRG NO GCF 50 39951A
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817
Description : PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Aluminium Container SER[25]()
Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020.
R
Nonestab
2) Expanded Polysterene FLAMEPROF[25]()
Specification : EXPANDED POLYSTYRENE SELF EXTINGUISHING TYPE(TYPE 2) DENSITY 30 KG/CU.M.CONFORMING TO CLAUSE 4.5.1 OF SPECIFICATION IS: 4671-1984 ( FIRST REV.) REAFFIRMED 2017 TO CQA(A) DRAWING NO 13981-1.0 DC 35707-A DTD 5-5-94 SIZE 108MM PLUS MINUS 2MM
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) ASSY ERA CONTAINER STD BOX[14]()
Specification : STANDARD ERA BOX TO SPEC. NO. HERML/MED/PS/290 & HEM
RL DRG. NO. 1457/1 & THE PART OF DRAWING AS GIVEN BELOW :-
STANDARD BOX CONTAINER WITH CLAMP & COLLAR TO DRG NO. 1457/2
STANDARD BOX CONTAINER TO DRG . NO. 1457/3, COLLAR TO DRG. NO
R
Nonestab
2) ASS ERA CONTAINER TOP BOX[14]()
Specification : TOP ERA BOX TO SPEC. NO. HEMRL/MED/PS/292 & HEMRL DRG. NO. 1459/1 & THE PART OF DRAWING AS GIVEN BELOW:-
TOP BOX CONTAINER WITH CLAMP & COLLAR TO DRG. NO. 1459/2, TOP BOX CONTAINER TO DRG. NO. 1459/3, COLLAR TO DRG. NO. 1459/4. LID (TOP)
1) Cylinder 12 A Steel for Ammunition Container Assembly 117 A[14]()
Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428.
R
Nonestab
2) Metallic Container For Charge 9[25]()
Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94.
R
Nonestab
3) BOX C 18A STEEL[42]()
Specification : SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A
R
Nonestab
4) BOX G 70 STEEL[42]()
Specification : AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA
DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A
AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BOX C 26 A SER[65]()
Specification : WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A
R
Nonestab
2) METALLIC CONTAINER M4A2 SER[25]()
Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94.
R
Nonestab
3) CYLINDER 443 MK1[65]()
Specification : CYLINDER 443 MK1/L GALVANISED STEEL SHEET TYPE DEEP DRAWING DESIGNATION GPD TO SPECN. IS : 277-2018 AS PER DRG.NO. OFBA/CX/51 DT.24/2/89. LAST AMENDMENT DATE : 16.07.2020. FELT DISC.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) TAIL UNIT ASSEMBLY TO DRG NO AAIW BS 0071[01]()
Specification : CONSISTING OF CONE TO DRG NO. AAIW/BS-0071/1, STABILISER FIN TO DRG NO. AAIW/BS-0071/2, STABILISER RING ASSEMBLY TO DRG NO. AAIW/BS-0071/3, AND BASE BUSH TO DRG NO. AAIW/BS-0071/4.
C
Estab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TAIL UNIT NO- TB 250 (9911358363)[99]()
Specification : TAIL UNIT NO.TB-250,DRG.NO.ARDE-9501-03 DT.19 APR 2000.AND SPECN.NO.ARDE/SPECN./613 PROVISIONALLY APPROVED ON 19 APR2000 AND AMENDED VIDE RCMA(AA)/1440/5/TECH DATED 29 APR 2010.PACKAGE DESCRIPTION-BOX STEEL NO.1 MK-I TO HOLD 1 TO DRG.NO.A
C
Nonestab
2) TAIL UNIT NO-1111 FOR 1000 LBS (9911358361)[99]()
Specification : TAIL UNIT NO.-1111 TO DRG.NO.ARDE-2139 DET.NO.1,2 SHTS,SHT NO.1,R NO.2 DATE 18-10-96 AND SHT NO.2 R NO.2 DT.02-12-2002AND SPECN.NO.ARDE/SPECN./459 PROVISIONALLY APPROVED ON 16JULY 1992.PACKAGE DESCRIPTION-CONTAINER FOR TU NO.1111 TODRG.NO
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) LINER
Description : LINER()
Specification : DRG. No.5173961, DC No.36490-A, Dt.19.11.98 (IS:737-2000, GR.19000 IN Ö CONDITION
1) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314[10]()
Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE)
R
Nonestab
2) PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE BRUSHING LIGHT BRUNSWICK GREEN ISC 225 IS 168 MF ITEM CODE 1011508225[10]()
Specification : PAINT L BRUNS GREEN ISC 225 IS 168 MF
R
Nonestab
3) paint red signal ISC 357 IS 138 SG ITEM CODE 1011538537[10]()
Specification : paint red signal ISC 357 IS 138 SG
Specification : PAINT READY MIXED AMMN. AIR DRYING BRUSHING SEMI-GLOSSY FOR GENERAL PURPOSE TURQUIOISE BLUE ISC NO.-102 OF IS-5-2007(6TH REV) TO SPECN 1S-168-1993(REAFFIRMED 2002)(3RD REV) DC NO. DC NO.3685-ME DT 19/3/01 AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) PAINT R/M A/D O.GREEN ISC-220[45]()
Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION
R
Estab
2) PAINT A/D LIGHT BRS GREEN[45]()
Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION
R
Estab
3) PAINT RMP R/O Z/C A/D JSS-8010[45]()
Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION
R
Estab
Category : p
Grade : Grade III
Size :
2646
CHENNAI FORGE PRODUCTS PVT LTD
PLOT NO. 57 ( OLD NO.67) III STREET, SIDCO INDUSTRIAL ESTATE AMBATTUR, CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 43204800 GSTIN : 33AABCC4668E1ZW
1) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Nonestab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
6) SUPPLY OF TRUNNION AS PER DRG NO. K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
7) LOWER HAND GUARD BAND AS PER DRG NO. K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Nonestab
8) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUNGER CHANGE LEVER TO DRG. No. 33P 3039 FOR 38MM MSL[70]()
Specification : AS PER DRG OF "PLUNGER CHANGE LEVER TO DRG. No. 33P 3039 FOR 38MM MSL.
"
C
Nonestab
2) PIN TRIGGER TO DRG. No.33P 3067 FOR 38mm MSL.[70]()
Specification : AS PER DRG OF PIN TRIGGER TO DRG. No.33P 3067 FOR 38mm MSL.
C
Nonestab
3) HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.[70]()
Specification : AS PER DRG OF HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.
C
Nonestab
4) RAM ROD ASSEMBLY TO DRG. No. 33P 6008* FOR 38mm MSL.[70]()
Specification : AS PER DRG OF RAM ROD ASSEMBLY TO DRG. No. 33P 6008* FOR 38mm MSL.
C
Nonestab
5) SCREW CHANGE LEVER TO DRG. No. 30P 3035, 33P 3035[70]()
Specification : AS PER DRG OF SCREW CHANGE LEVER TO DRG. No. 30P 3035, 33P 3035
C
Nonestab
6) PLATE BUTT RELEASE FOR MGL TO DRG. NO.30P 5014[70]()
Specification : AS PER DRG OF PLATE BUTT RELEASE FOR MGL TO DRG. NO.30P 5014
C
Nonestab
7) RETAINING RING TO DRG. NO. 30P 3045[70]()
Specification : AS PER DRG OF RETAINING RING TO DRG. NO. 30P 3045
C
Nonestab
8) RANGE PLATE LH TO DRG. NO. 30P 4008[70]()
Specification : AS PER DRG OF RANGE PLATE LH TO DRG. NO. 30P 4008
C
Nonestab
9) RANGE PLATE RH TO DRG. NO. 30P 4009[70]()
Specification : AS PER DRG OF RANGE PLATE RH TO DRG. NO. 30P 4009
C
Nonestab
10) STOCK PLATE LH TO DRG. NO. 30P 5012[70]()
Specification : AS PER DRG OF STOCK PLATE LH TO DRG. NO. 30P 5012
C
Nonestab
11) STOCK PLATE RH TO DRG. NO. 30P 5013[70]()
Specification : AS PER DRG OF STOCK PLATE RH TO DRG. NO. 30P 5013
C
Nonestab
12) CHANGE LEVER LH TO DRG. No. 33P 3036 FOR 38mm MSL.[70]()
Specification : AS PER DRG OF CHANGE LEVER LH TO DRG. No. 33P 3036 FOR 38mm MSL.
C
Nonestab
13) CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL.[70]()
Specification : AS PER DRG OF CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
2648
MECHANICAL ENERGY SYSTEM
87/2/4 DASHORATH GHOSH LANE P.O. : BAMUNGACHI, HOWRAH : 711 106 BAMUNGACHI HOWRAH West Bengal
PIN1 : 711106
Phone No. : 9330806957 GSTIN : 19AAYFM0346B1Z6
1) SUPPLY OF DISCONNECTOR AS PER DRG NO.K-2065 WITHFRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-2065 WITHFRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUNGER CHANGE LEVER TO DRG. No. 33P 3039 FOR 38MM MSL[70]()
Specification : AS PER DRG OF "PLUNGER CHANGE LEVER TO DRG. No. 33P 3039 FOR 38MM MSL.
"
C
Nonestab
2) HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.[70]()
Specification : AS PER DRG OF HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.
C
Nonestab
3) WELDING OF FRONT FRAME ASSY TO DRG. NO. 30P 1100 (40MM MGL)[00]()
Specification : AS PER DRG OF WELDING OF FRONT FRAME ASSY TO DRG. NO. 30P 1100 (40MM MGL)
C
Nonestab
4) FRONT FRAME TO DRG. NO. 30P 1104[70]()
Specification : AS PER DRG OF FRONT FRAME TO DRG. NO. 30P 1104
C
Nonestab
5) RANGE PLATE LH TO DRG. NO. 30P 4008[70]()
Specification : AS PER DRG OF RANGE PLATE LH TO DRG. NO. 30P 4008
C
Nonestab
6) STOCK PLATE LH TO DRG. NO. 30P 5012[70]()
Specification : AS PER DRG OF STOCK PLATE LH TO DRG. NO. 30P 5012
C
Nonestab
7) STOCK PLATE RH TO DRG. NO. 30P 5013[70]()
Specification : AS PER DRG OF STOCK PLATE RH TO DRG. NO. 30P 5013
C
Nonestab
8) CHANGE LEVER LH TO DRG. No. 33P 3036 FOR 38mm MSL.[70]()
Specification : AS PER DRG OF CHANGE LEVER LH TO DRG. No. 33P 3036 FOR 38mm MSL.
C
Nonestab
9) CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL.[70]()
Specification : AS PER DRG OF CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Nonestab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
6) SUPPLY OF TRUNNION AS PER DRG NO. K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
7) LOWER HAND GUARD BAND AS PER DRG NO. K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Nonestab
8) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF BLOCK EJECTOR ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.[70]()
Specification : AS PER ICR-1324 TO DS.CAT.N0:1005-001513 DC.NO.26758-SA DATED 28.05.15 FULLY FINISHED CONDITION WITH FIRM MATERIAL. LATEST ISSUE TO BE FOLLOWED.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()
Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
2) SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
3) FORE SIGHT FOR BETA SOURCE TO DRG NO.32P 1305*6 (FULLY FINISHED)WITH FIRM'S MATERIAL FOR 40MM UBGL.[70]()
Specification : AS PER DRAWING
C
Nonestab
4) PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Nonestab
2) CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
3) CLEANING ROD EXTENSION AS PER DRG No. K 9002 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9002 WITH FIRM'S MATERIAL
E
Nonestab
4) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL
E
Nonestab
Category : p
Grade : Grade III
Size :
S
2649
TAMILNADU PETROPRODUCTS LIMITED
POST BOX NO. 009, MANALI EXPRESS HIGHWAY MANALI, CHENNAI TAMIL NADU
PIN1 : 600068
Phone No. : 04425940357
Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
R
Nonestab
2) PAPER WASHER GLAZED BOARD[64]()
Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) PAPER WASHER GLAZED BOARD[64]()
Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
R
Nonestab
2) PAPER CORRUGATED AMMUNITION[14]()
Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) PAPER KRAFT AMMUNITION[14]()
Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-17: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN -
R
Nonestab
2) Piece Packing Mill Board[25]()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
R
Nonestab
3) PAPER WRAPPING WAXED CRAFT AMMUN[14]()
Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05 2017 (Fifth Revision), DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
R
Nonestab
4) PAPER WHITE FINE AMMUN[14]()
Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2016. (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
R
Nonestab
5) PAPER CORRUGATED AMMUNITION[14]()
Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.
R
Nonestab
6) DISC FELT WOOL 5 MM[25]()
Specification : DISC FELT WOOL 5 MM AS PER CIA DRG.NO 12911-0-0 DC(I)34186 A, DT-3.8.87.WITH MATERIAL SPECIFICATION AS PER CL.NO.3.2 OF IS 1719 : 2000.REAFFIRMED IN 2019.(FORTH REVISION)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PAPER WRAPPING WAXED KRAFT AMMUNITION[14]()
Specification : SPECN.JSS:8135-05:2013(REVISION NO.4) DC 5186 ME DATED 19-03-14 SUBSTANCE OF 90 + 5 G/M2 IN ROLL OF 112 CMS X 100 MTRS. DS CAT NO 8135-000149
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) MILL BOARD AMMN[14]()
Specification : SPECN.JSS : 9310-01-2014 (REV.NO.3) DS-CAT-NO-9310-000001. DC NO.5290 ME - 16/12/2014.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BOARD GLAZED CALENDERED AMMN 787 X 558 X 1.25 MM THICK[14]()
Specification : JSS 8135-13:1998
R
Nonestab
2) PAPER WHITE FINE AMMN SPECN JSS[14]()
Specification : SPECN.: JSS - 9310 - 06 :2016 REV.1 SIZE :508 MM X 762 MM IN S/O 84 TO 92 GSM. D S CAT NO.9310-000 013."
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BOARD GLAZED CALENDERED AMMN 787 X 558 X 1.25 MM THICK[14]()
Specification : JSS 8135-13:1998
R
Nonestab
2) MILL BOARD 787MM X 558MM X 5MM THICK[14]()
Specification : JSS-9310-01:2007
R
Nonestab
3) MILL BOARD SIZE : 1016 X 762 X 2.5MM +/- 0.35MM[14]()
Specification : JSS-9310-01-2007
R
Nonestab
4) MILL BOARD SIZE 787 MM X 559MM X 1.25 MM THICK[10]()
Specification : JSS 8135-13: 2007
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BOARD STRAW TO SPECN[14]()
Specification : "BOARD - STRAW TO SPECN.NO.JSS-8135-11-2014 (REVISION NO.3, SIZE - 762 X 1016 X 2.5MM "
P
Nonestab
2) MILL BOARD TO SPECN JSS[14]()
Specification : SPECN. JSS-9310-01:2014 (REV. NO.3)DS CAT NO.9 310-000001. DC NO.5290-ME DTD.16/12/14 SIZE : 1 MTR X 1/2MTR X 1.4 MM + 0.0, -0.3MM THICK.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1421233128 MILL BOARD CUP[14]()
Specification : JSS 9310-01:2007
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE[14]()
Specification : JSS:8135-09: 2004
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1418617416 PAPER CORRUGATED BOARD STD SZ TH5MM[14]()
Specification : JSS 8135 - 08 : 1998
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1421203630 MILL BOARD[14]()
Specification : MILL BOARD TO SPECN.JSS 9310-01: 1994 DC 3279-ME DT.21.02.95 (REVISION NO.-1)SIZE - 787 X 559 X 2.00 MM +- 0.30 MM THICK.MASS - 2100 +- 315 GSM.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1418020075 PAPER NATURAL BROWN COLOR OF 990MM[14]()
Specification : PAPER NATURAL BROWN COLOR OF 990MM WIDTH FOR CARTRIDGE CASEAMMN.TO SPECN.NO.JSS 8135-09:2004 (REV-2)(REAFFIRMED 2011)DC NO.5065-ME DT.10-01-2012.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM[14]()
Specification : SPECN. NO. JSS 8135-017
R
Nonestab
2) 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5[14]()
Specification : SPECN. NO. JSS 8135-09
R
Nonestab
3) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN[14]()
Specification : SPECN. NO. JSS-8135-05
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1415837116 PAPER HAND MADE 508 X 381 X 0.18 MM[14]()
2) 1419828715 PAPER WHITE FINE JSS 9310-06:2002.[14]()
Specification : SPECN. JSS - 9310-06 : 2002
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1421962011 PULP BOARD WHITE[14]()
Specification : PULP BOARD WHITE COLOURED, SIZE 710 +/- 5 MM X 560 +/- 5 MM X 0.25 +/- 0.025 MM GSM- 200 TO 210, SPECN. IS: 4664-1986(FIRST REVISION) (REAFF. 2000)
R
Nonestab
2) 1422000020 GLAZED BOARD[14]()
Specification : GLAZED BOARD CALENDERED AMMUNITION TO SPECN. JSS 8135 -13 DC3554-ME SIZE 700 X 500 X 0.20 MM SUBSTANCE :- 250 +- 25 GSM.
R
Nonestab
3) 1422005228 GLAZED BOARD[14]()
Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK
R
Nonestab
4) 1419790003 PAPER BLACK GLAZED[14]()
Specification : PAPER BLACK GLAZED SIZE - 33.65 CM X 41.27 CM, 60 GSM
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1421006729 MILL BOARD 787 X 559 MM[14]()
Specification : JSS 9310-01: 2007
R
Nonestab
2) 1421203828 MILL BOARD 787 X 559 MM[14]()
Specification : JSS 9310-01:2007
R
Nonestab
3) 1418617801 CORGTD CARD BOARD SHEET A B C SIZES[14]()
Specification : CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET I HEMRL/ED/DRG NO.001 DET.NO.1 SZ-600MM X225MM X32.5MM THICK 18 NOS/SET. (B) PKG.SHEET II DET.NO.2 SZ- 590MM X235MM X42.5MM THK.18 NOS/SET.(C)PKG.SHEET III DET.NO.3 SZ- 23
Specification : ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32M
15) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG[14]()
Specification : JSS 9310- 03: 2010
R
Nonestab
16) 1419828815 PAPER WHITE FINE[14]()
Specification : JSS 9310-06: 2002
R
Nonestab
17) 1422005117 GLAZED BOARD 2 X 630 X 420 MM[14]()
Specification : JSS-8135-13:2007
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PAPER KRAFT AMMUNITION[14]()
Specification : PAPER KRAFT AMMUNITION TO SPECN. NO. JSS 8135-017:2016 (REV-I) SIZE 483X635 MM, SUSTENANCE, GRAM PER SQUARE METER 125+_ 5 DS CAT NO. 8135-000349.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1422006617 GLAZED BOARD 1.00 X 700 X 525 MM[14]()
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
R
Nonestab
Category : p
Grade : 3
Size :
S
2652
ARROW ENGINEERING INDUSTRIES PRIVATE LIMITED
PLOT NO-34, PHASE IV,RAJIV GANDHI NAGAR, NEAR JEEDIMETLA BUS DEPOT, IDA JEEDIMETLA,HYDERABAD-500055 PHASE- IV HYDERABAD Telangana
PIN1 : 500055
Phone No. : 29569370 GSTIN : 36AASCA8454D1ZD
Specification : S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyest
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Polyester fleece fabric knitted O G 150 cm min[21]()
Specification : SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON 300 GSM RIPSTOP PU COATED F R 152 CMS WIDE[21]()
Specification : FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE
SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Three Layer WP Breathable Fabric Dual Shade OG White 118 cm width[21]()
Specification : Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width
Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1
R
Estab
2) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]()
Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
R
Estab
3) 100 Percent Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min[21]()
Specification : 100% Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min
specification :-Appendix "B" of Provisional Specification No. S/2594/C/CCWDCP/TC-15(a). Pantone Shade No 19-55513 TPX
Specification : fabric polyester plain weave 110g olive green width 150cm min
Specification appendix D of provisional specification No S/2594/C/CCWDCP/TC-15(a) with pantone shade 19-5513 TPX
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) POLYESTER SATIN PIPING 7 CM OLIVE GREEN[21]()
Specification : OCFS/BLANKET SUPERIOR OG/PIPING/2012 REVISION NO.2
Zenith Bio Chemical Industries Pvt Ltd
Gat No.1092 sanaswadi, Bharat Gas Rod Pune Maharashtra
PIN1 : 412208
Phone No. : 9527718100 GSTIN : 27AAACZ8457F1ZY
Specification : POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1.
E
Nonestab
2) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG CASE[21]()
Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambernath
Name
Specification
Use
Status
1) POLYTHENE BAG FOR 130 MM CARTRIDGE CASE[25]()
Specification : POLYTHENE WEATHER PROOF PROTECTIVE BAG FOR CARTG. CASE 130MM TO DRG. NO. CC130/SK/0007/C DT 24/02/2004 SHEET NO.1/1 AMENDED UPTO 16/06/2016 TO SPECN. JSS:9330-03-2014, REV. NO.3, LDPE GRADE TYPE 1.
E
Nonestab
2) POLYTHENE BAG FOR 84 MM CARLGUSTAV CARTG CASE[21]()
Specification : POLYTHENE PROTECTIVE BAG AS PER MATL. LDPE GRADE TYPE 1 TO SPECN JSS 9330-03:2007 REV NO.2 FOR 84MM CG CC OF SIZE LENGTH 440-450 MM, DIA 110, LAY FLAT 173(+10,-0), THICKNESS 0.26-0.06 AS PER DRG. NO. CG84/SK/11003/C DT 14/11/2010 AMENDED
C
Nonestab
3) VCI POLYTHENE BAGS FOR 30 MM SARATH[21]()
Specification : AS PER SPECIFICATION / DRAWING REQUIREMENT MENTIONED IN OUR OTE PUBLISHED FOR THE ITEM IN OUR E-PROC SITE.
E
Nonestab
4) POLYTHENE BAG RW142[25]()
Specification : JSS;9330-03-2014 REV NO.3, L.D.P.E GRADE TYPE 1.
