List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2501 Sunflag Iron And Steel Company Limited
33, Mount Road , SADAR Nagpur 440001 33, Mount Road Nagpur Maharashtra
PIN1 : 440001
Phone No. : 2520356
GSTIN : 27AACCS3376C1ZH 		NGPSO6339E

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40[03]() Specification : STEEL ROD 32mm (+0.5MM-0MM) DIA, TO SPECN BS:970 PT-I:1983, GD-708 M-40"T"(EN-19A) V.D. IN HR PEELED & ANNEALED COND (240 HV MAX) MAINTAINED S&P COMBINED= .022%MAX.(%S-01MAX & %P-015 MAX.) TO LENGTH SIZE-490 MM (-1.0MM) FOR BARREL R Nonestab
2) STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B)[03]() Specification : STEEL ROD 32mm DIA (+0.1-0.00) PEELED BAR IN EXACT LENGTH OF 800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970, PT-I:1983, GD-835, M-15 (EN-39B) R Nonestab
3) STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK.[03]() Specification : STEEL ROUND 38 MM DIA 380 MM LONG BS 970, PT-1,1983,708M 40/ EN-19 FOR BARREL OF 7.62 MM RIFLE GHATAK. R Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) PARTED STEEL BILLET FOR 155MM ADAPTOR AS PER OFAJ DRG NO F 640[00]() Specification : as per Drawing R Nonestab
2) VARIOUS TYPE OF STEEL BILLET AS PER REQUIREMENT OF ORDNANCE FACTORY AMBAJHARI[00]() Specification : VARIOUS TYPE OF STEEL BILLET AS PER REQUIREMENT OF ORDNANCE FACTORY AMBAJHARI R Nonestab
3) STEEL BILLET FOR 120 MM FSAPDS STEEL CUP FORGING AS PER OFAJ DRG NO F 655[00]() Specification : AS PER DRAWING R Nonestab
4) PARTED STEEL BILLET AS PER OFAJ DRG NO F 639 FOR INVAR SHELL[00]() Specification : AS PER DRAWING R Nonestab
5) STEEL ROUND AS PER GRADE SS B 27 TO SPECN JSS 9510 01 1982 SIZE 160 PLUS 5 MINUS 0 MM DIA[00]() Specification : TO SPECN.JSS:9510-01 1982 R Nonestab
6) STEEL ROUND AS PER GRADE SS B 27 TO SPECN JSS 9510 01 1982 PARTED IN LENGTH OF 420[00]() Specification : SS/B-27 TO SPECN.JSS:9510-01 1982 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]() Specification : STEEL ROD 32(+0.00/-0.10)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTR.TO SPECN: STEEL GRADE 50 TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES AS PER SPECN NO. ML 002 SHT. 1 OF 1 REVISION NO. 2 DATED 10-5-96 R Estab
Category :
Grade : Grade III
Size : L
1) Metal and Steel Factory
Name Specification Use Status
1) ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9515-12- 2001[07]() Specification : ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9 R Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 14point5 MM IS 4431 14C14S14CD LF 0133001145 Description : STEEL ROD 14point5 MM IS 4431 14C14S14CD LF 0133001145() Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2014)(1st REVESION)GRADE-14C14S14 IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) PARTED STEEL BILLET FOR 84 MM HEDP AS PER OFAJ DRG NO F 630[00]() Specification : . R Estab
Category : ddp
Grade : Grade II
Size : L
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) PARTED STEEL BILLET TO OFAJ DRG NO F 602 B AND SPECIFICATION AS PER OFAJ SPECN NO F329M[00]() Specification : AS PER OFAJ SPECN F329M R Estab
2) PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL[00]() Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL R Estab
3) PARTED STEEL BILLET TO OFAJ DRG NO F 603 B AND SPECIFICATION AS PER OFAJ SPECN NO F 329M[00]() Specification : AS PER OFAJ SPECN.NO.F-329M R Estab
Category : ddp
Grade : Grade II
Size : L
2502 SHANTI ENGINEERING WORK SHOP
43, ELECTRONIC ZONE SQUARE, MIDC, HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440016
Phone No. : 645774
GSTIN : 27AFAPS9298D1ZZ 		AFAPS9298D

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) COVER FOR DUMMY TRAINING CHARGE 125MM 2527087072[00]() Specification : COVER AS PER DRAWING NO.4-026706 011 FOR DUMMY TRAINING CHARGE 125MM. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Tail Adapter As Per Drg. (Part) No. ITV 47 For Tail Unit 2A[65]() Specification : ITV 47 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG NO ADRDE 1403 02 6245141403[62]() Specification : ASSEMBLY STRUT WITH PIN HD SYSTEM TO DRG. NO. ADRDE-1403-02 C Nonestab
2) ASSEMBLY LOADING BRACKET LEFT AND RIGHT TO DRG NO ADRDE 1414 FOR AN 32 PLATFORM 6245001414[62]() Specification : ASSEMBLY LOADING BRACKET (LEFT & RIGHT) TO DRG NO. ADRDE-1414 FOR AN-32 PLATFORM C Nonestab
3) QUICK RELEASE FASTENER WITH PIN OF DRG NO ADRDE 1409 FOR AN 32 PLATFORM 6245001409[62]() Specification : QUICK RELEASE FASTENER WITH PIN OF DRG NO.ADRDE-1409 FOR AN-32 PLATFORM C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]() Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]() Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) LOCK CENTRIFUGAL PLUNGER PIN TO CQA A DRG NO 13134 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]() Specification : LOCK, CENTRIFUGAL PLUNGER PIN TO CQA(A) DRG. NO. 13134-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002 C Nonestab
2) PIN CONNECTING TO CAT SECTION CAT PART NO 14 5315 001704 AND DRG CAT NO 23705[00]() Specification : PIN CONNECTING TO CAT SECTION CAT/PART NO 14/5315-001704 AND DRG/ CAT NO 23705 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade III
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) MACHINING OF CYLINDER AS PER DRG. NO. AAIW/BS-0069.[22]() Specification : MACHINING OF CYLINDER AS PER DRG. NO. AAIW/BS-0069. MACHINING OF CYLINDER AS PER DRG NO.AAIW/BS-0069. C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) LOCKING NUT TO CQA A DRG NO 3 016919 DET 55 DC 37284 A DT 06 07 2011[63]() Specification : LOCKING NUT TO CQA(A)”DRG NO. 3-016919 DET-55DC-37284-A DT.06.07.2011 C Estab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
2503 Ramco Steels Pvt. Ltd
Plot No 75 Sector - 25 Faridabad Haryana
PIN1 : 121004
Phone No. : 7120024
GSTIN : 06AAACR0261K1ZL 		AAACR0261K

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) INTERMEDIATE GEAR FORGING DRG NO 175 45 005 F[39]() Specification : INTERMEDIATE GEAR FORGING DRG NO 175 45 005 F C Nonestab
Category : p
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) DRIVEN GEAR FORGING TO DRG NO 175 45 007 F[39]() Specification : DRIVEN GEAR FORGING TO DRG NO 175 45 007 F C Nonestab
Category : p
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) HALF COUPLING FORGING[71]() Specification : HALF COUPLING FORGING FOR HALF COULPLING TO DRG NO 2A46.21-20-3 SPECN. 655 M 13 TO BS-970 PT-I-83. R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FORGING DRG 64C 2037 200 E3 FIRMS MATERIAL REQD FOR BARREL CATCH C2037[70]() Specification : AS PER DRG OF FORGING DRG.64C 2037 200 E3. (FIRM'S MATERIAL) REQD FOR: BARREL CATCH C2037 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) WELDING OF FRONT FRAME ASSY TO DRG. NO. 30P 1100 (40MM MGL)[00]() Specification : AS PER DRG OF WELDING OF FRONT FRAME ASSY TO DRG. NO. 30P 1100 (40MM MGL) C Nonestab
2) FRONT FRAME TO DRG. NO. 30P 1104[70]() Specification : AS PER DRG OF FRONT FRAME TO DRG. NO. 30P 1104 C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BUTT FRAME ASSY AS PER DRG NO K 6006 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO.K 6006 WITH FIRM’S MATERIAL C Nonestab
2) MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR2 FROM OFT MATERIAL[70]() Specification : MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL R Nonestab
3) forging for pre machining of front frame[70]() Specification : forging for pre machining of front frame C Nonestab
4) Front Frame Forging[70]() Specification : Front Frame Forging for Front Frame as per drawing C Nonestab
5) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]() Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL C Nonestab
6) Manufacturing and supply of barrel blank after honing stage[70]() Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel C Nonestab
7) Frame side tray feed to DSCAT NO 1005 007400 A5107 DC NO 26983 SA[70]() Specification : Frame side tray feed to DSCAT NO 1005 007400 A5107 DC NO 26983 SA for DC latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998057 C Nonestab
8) FRAME BASKET WELD View AS PER DRG noY19388A 00 FOR MECH SRU ASSY OF SRCG[74]() Specification : FRAME, BASKET, WELD (View) AS PER DRG.no.Y19388A-00. FOR MECH SRU ASSY OF SRCG. R Nonestab
9) FRAME WELDING ASSY 44P 05100 STAR[70]() Specification : AS PER OFT REQUIREMENTS C Nonestab
10) FRAME WELDING ASSEMBLY TO DRG NO 44P05100ST REQUIRED FOR AMR[70]() Specification : AS PER OFT REQUIREMENTS C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Nonestab
2) THRUSTER PLATE FORGING 1000 LBS (6220200120)[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. C Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT " C Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]() Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]() Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
7) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
8) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
9) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Estab
10) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
11) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
12) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
13) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
14) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Nonestab
15) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
16) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Nonestab
17) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
18) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
19) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Estab
20) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
21) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
22) PLUG A/C 34 1000 LBS (6220501010)[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
23) PLUG FASTENING 250 KG (6241101124)[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
24) PLUG (MCD) 250KG (6240901205)[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED] DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
25) PLUG 450 KG (MCD) (6231101105)[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
26) PLUG DUMMY 250 KG (6241101114)[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
27) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
28) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
29) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
30) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
31) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
32) Protecting Ring Assly 1000LBS (6220900610)[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG. NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES], CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER 8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP C Nonestab
33) ROLLING RING ASSEMBLY 250KG (6241100114)[62]() Specification : ROLLING RING ASSY. TO DRG No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED] C Nonestab
34) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
35) TA BOLT M-27 (6120100108)[61]() Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841 [DRG.ENCLOSED. C Nonestab
36) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
37) PLUG REAR (6250000501)[62]() Specification : PLUG REAR TO DRG.No. OFM/30858 [BASED ON ITV 52. [DRG.ENCLOSED] C Nonestab
38) HEX SOCKET SET SCREW 450 KG (6230001304)[62]() Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP). C Nonestab
39) HEX SOCKET SET SCREW (BT) 450 KG (1727041225)[17]() Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP) C Nonestab
40) HEX SOCKET HD CAP SCREW M6X25 (1732040625)[17]() Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT]. C Nonestab
41) HEX SOCKET SET SCREW M5 450KG (6230901104)[62]() Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP) C Nonestab
42) LOCKING SCREW FOR DETO. HOLDER (6220901100)[62]() Specification : LOCKING SCREW (FOR DETONATOR HOLDER) ARM-1172A-3 DRG. ENCLOSED]. C Nonestab
43) SCEWFOR RING NUT (6220900800)[62]() Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED] C Nonestab
44) SOCKET SET SCREW FOR BASE TRANSIT (1751020207)[17]() Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED]. C Nonestab
45) LOCKING SCREW FOR CONT. EXPLOTER (6220900710)[62]() Specification : LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18] [DRG. ENCLOSED]. C Nonestab
46) TA LINK FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
47) TA CLAMP FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
48) SET OF TA SHOE & TA GUIDE FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
49) TA CLAMP MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
50) SET OF TA SHOE & TA GUIDE MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
51) TA LINK HEAT TREATED[99]() Specification : AS PER SPEFICIFICATION C Nonestab
52) SET OF TA SHOE & TA GUIDE HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
53) TA LINK MACHINED[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
54) TA CLAMP HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]() Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593) C Nonestab
Category :
Grade : Grade III
Size : M
1) Small Arms Factory
Name Specification Use Status
1) Steel Forging Cylinder Gas[01]() Specification : Steel Forging Cylinder Gas SKM 306*5 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG R Nonestab
Category : p
Grade : Grade I
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HEAD TO SK NO OTF S 002 DRG NO 4 025998 DET NO 002 AND DC 35862 A DT 01 12 94 IN FINISHED CONDITION WITHOUT SURFACE TREATMENT[62]() Specification : HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 AND DC 35862-A DT 01/12/94 IN FINISHED CONDITION (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : L
2504 VORTEX ENGINEERING WORKS INDIA PVT LTD
PLOT NO:B-3, PHASE-2, SAGAON, MIDC MANPADA ROAD DOMBIVLI Maharashtra
PIN1 : 421204
Phone No. : 2871339
GSTIN : 27AAFCV2939P1ZL 		AAFCV2939P

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) 7119073020 WELL DRG NO 675 73 461 FULLY FINISHED ALONG WITH MATERIAL[71]() Specification : 7119073020 WELL , DRG. NO. 675.73.461 (FULLY FINISHED ALONG WITH MATERIAL) E Nonestab
Category :
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) 7110306069 MANUFACTURING and SUPPLY OF BRAKE DRUM TO DRAWING NO P 155 HRG 2058 TO BE MANUFACTURE FROM CASTING FOR BRAKE DRUM TO DRAWING NO P 155 HRG 2058 2[71]() Specification : AS PER DRG NO P 155 HRG 2058 AND P 155 HRG 2058 2, MONITORING INSTRUCTIONS R Nonestab
2) 7110306070 MANUFACTURING AND SUPPLY OF PLANETARY CARRIER TO DRAWING NO P 155 HRG 3013 TO BE MANUFACTURED FROM PLANETARY CARRIER CASTING TO DRAWING NO P 155 HRG 3013 2[71]() Specification : AS PER DRG NO P 155 HRG 3013 AND P 155 HRG 3013-2 R Nonestab
3) 7110306071 SEMI FINISH CASTING FOR HUB TO DRAWING NO 998 SEMIFINISH 3497 TO BE MANUFACTURED FROM HUB CASTING TO DRAWING NO P 155 HRG 1002 2[71]() Specification : SEMI FINISH CASTING FOR HUB TO DRAWING NO 998 SEMIFINISH 3497 TO BE MANUFACTURED FROM HUB CASTING TO DRAWING NO P 155 HRG 1002 2 R Nonestab
Category :
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FINISHED HOUSING TO DRG NO 188 94 001 FOR TRAVERSE REDUCTION GEAR UNIT CODE 94 AS PER VENDOR QUALIFICATION CRITERIA&SCOPE OF WORK IN ANNEXURE I[71]() Specification : DRG NO 188 94 001 C Nonestab
Category : ddp
Grade : Grade I
Size : S
2505 M Tech Industries
Plot No 19 Survey No 185/1/1 Dokmardi Village Amli Silvassa Dadra and Nagar Haveli
PIN1 : 396230
Phone No. : 6530359
GSTIN : 26AABFM0005G1Z0 		MUMM11795A

Download 		1) Small Arms Factory
Name Specification Use Status
1) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]() Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW C Nonestab
2) COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE[70]() Specification : COCKING HANDLE MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-14-000-00DB CONSISTING OF INSERT COCKING HANDLE C Nonestab
3) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]() Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
4) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]() Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER C Nonestab
5) BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB[70]() Specification : BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BUTT ARMS MOULDING FOR JVPC[70]() Specification : BUTT ARMS MOULDING DRG. NO. 0204-03-03-03-18-000-00DF C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Bolangir
Name Specification Use Status
1) BOX 7A (PLASTIC)[14]() Specification : DRG.NO. ISV 441A (ARDE-1431),DC NO.35596A DT.01.10.93. C Nonestab
2) FUZE ANTIREMOVAL MINE AT 2B ND EMPTY[61]() Specification : DRG.NO.ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT.03.05.94 SCANNED DT.10.10.02 TO SPECN.CQA (A) 1825(C), DC 36823-A DT.20.03.02. C Nonestab
3) MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A[61]() Specification : DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A, DT.06.03.07. [REFER SUB ASSY DRG. BODY MINE ITX-347, END CAP ITX 344, PLUG CLOSING BOTTOM ITX 340, PLUG CLOSING END CAP ITX 341, HOUSING FUZE ANTI REMOVAL ITX 345, PIN LOCKING END C Nonestab
4) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)[61]() Specification : DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN. NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002. [REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY) TO IQX 86A DC NO.35879-A DT.20.12.94 (2) HOUSING HOLDER DETONATOR ASSY TO IQ C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6356000016 CONTAINER CLEARING CHARGE EMPTY ASSY TO DRAWING NO ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK II FILLING AND ASSEMBLY[63]() Specification : CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY. C Nonestab
2) 6356000012 EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF A DETONATOR TUBE ARDE DRG NO 9707 00 01 01 05 001 00TAB SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 05 19 000 00TAC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 17 19 001 00TA[63]() Specification : EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF(A) DETONATOR TUBE ARDE DRG.NO.9707 00 01 01 05 001 00TAB)SQUIB PLUG (EMPTY)ARDE DRG NO.9707 00 01 05 19 000 00TAC)PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG.NO.970700 01 17 19 001 00TA C Nonestab
3) 6454000058 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY[64]() Specification : SQUIB PLUG (BRIDGED)(EMPTY) FOR CONTAINER CLEANING CHARGE TODRAWING NO.ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK-II-FILLING AND ASSEMBLY. C Nonestab
4) 6206500061 MINE DRILL A T 1A ND EMPTY WITHOUT FUZE DRILL MINE A T 1C NDTO DES REF NO CIA AMN 2255 DRG PT NO ITX 11 GEDC NO 37050 A DTD 19 04 06 SPECN NO CQA 1801 D DC 37050 ADT 19 04 06[62]() Specification : MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C NDTO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GEDC NO. 37050-A DTD 19/04/06,SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE[63]() Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND SPECIFICATION NO.S-I/CM/IMMK II/ATP/01. C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PLASTIC MAGAZINE Assy FOR K7040[70]() Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040 E Nonestab
Category : p
Grade : Grade III
Size : S
2506 THE STANDARD ALLOY STEEL INDUSTRIES
PLOT NO 67/1 16TH KM INDORE DEWAS ROAD, VILLAGE RAHUKHEDI, NH-3 P.O. MANGLIYA - 453771, DIST. INDORE Madhya Pradesh
PIN1 : 453771
Phone No. : 9630052526
GSTIN : 23AGTPS4858B2Z1 		AGTPS4858B

Download 		1) Rifle Factory Ishapur
Name Specification Use Status
1) ROTATING ADAPTER FOR BIPOD ASSY[70]() Specification : ROTATING ADAPTER FOR BIPOD ASSY (DRG.NO.-ODC/RFI.SK.0055)WITH 9-13 INCH TILT ADJUSTMENT SMOOTH LEG BIPOD FOR 7.62SNIPER RIFLE.DETAILS AS PER ENCLOSURE. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FINISHED HOUSING TO DRG NO 188 94 001 FOR TRAVERSE REDUCTION GEAR UNIT CODE 94 AS PER VENDOR QUALIFICATION CRITERIA&SCOPE OF WORK IN ANNEXURE I[71]() Specification : DRG NO 188 94 001 C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FINISHED HOUSING TO DRG NO 188 94 001 FOR TRAVERSE REDUCTION GEAR UNIT CODE 94 AS PER VENDOR QUALIFICATION CRITERIA&SCOPE OF WORK IN ANNEXURE I[71]() Specification : DRG NO 188 94 001 C Nonestab
2) 7110308052 FABRI MACH OF WHEEL BEAM 2025040[71]() Specification : FABRI.&MACH.OF WHEEL BEAM 2025040. R Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF LUG 243[61]() Specification : AS PER DRAWING C Nonestab
2) MACHINING OF LUG 318[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF LUG 243[61]() Specification : AS PER DRAWING C Nonestab
2) MACHINING OF LUG 318[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
3) MACHINING OF 250 KG STEEL BOTTLE CASTING 6241101206[62]() Specification : AS PER OFM SPECIFICATION E Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) EQUILIBRATOR ASSY TO DRG. NO. 1015-000413[90]() Specification : EQUILIBRATOR ASSY TO DRG. NO. 1015-000413 C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) LOCK ELEVATING TO DRG. NO. IAN-154-SA[90]() Specification : LOCK ELEVATING TO DRG. NO. IAN-154-SA C Nonestab
2) LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA[90]() Specification : LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA C Nonestab
Category : dp
Grade : Grade III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Crank() Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F C Nonestab
Category : p
Grade : Grade I
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Crank[64]() Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F C Nonestab
2) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]() Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN C Nonestab
Category : p
Grade : Grade I
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) HYDRO CYCLONE SETTLER ASSY / 175.66.026CB-1CB[62]() Specification : HYDRO CYCLONE SETTLER ASSY / 175.66.026CB-1CB E Nonestab
2) ADAPTER / 52-PT-412C.41-102[62]() Specification : ADAPTER / 52-PT-412C.41-102 E Nonestab
3) CONNECTOR / 52-PT-412C.41-105[62]() Specification : CONNECTOR / 52-PT-412C.41-105 E Nonestab
4) DETACHABLE END-PIECE / 175.95.110A[62]() Specification : DETACHABLE END-PIECE / 175.95.110A E Nonestab
5) DEVICE FOR DISMANTLING CONE AND DRIVE WHEEL ASSY. / 434.95.038CB[62]() Specification : DEVICE FOR DISMANTLING CONE AND DRIVE WHEEL ASSY. / 434.95.038CB R Nonestab
6) DEVICE FOR MOUNTING AND REMOVING OF GEAR BOX AS AN ASSEMBLY WITH FINAL DRIVE / 175.95.004CB-1[62]() Specification : DEVICE FOR MOUNTING AND REMOVING OF GEAR BOX AS AN ASSEMBLY WITH FINAL DRIVE / 175.95.004CB-1 E Nonestab
7) DEVICE FOR SETTING THE TORSION ANGLE OF TORSION BAR ASSY. / 175.95.001CB-5[62]() Specification : DEVICE FOR SETTING THE TORSION ANGLE OF TORSION BAR ASSY. / 175.95.001CB-5 E Nonestab
8) FIXTURE FOR PRESSING OFF-THE PLANET / 172.95.120CBCB[62]() Specification : FIXTURE FOR PRESSING OFF-THE PLANET / 172.95.120CBCB E Nonestab
9) PLUG / 166.26.169[62]() Specification : PLUG / 166.26.169 E Nonestab
Category : p
Grade : Grade I
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) THRUST BUSHING / 175.95.114-1[06]() Specification : THRUST BUSHING / 175.95.114-1 E Nonestab
Category : p
Grade : Grade I
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) COUPLING HOUSING TO ART NO 4063085[90]() Specification : AS PER TENDER DOCUMENT C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) DEVELOPMENT OF TRAVERSE BEARING REQUIRED FOR NEW PROJECT[90]() Specification : DEVELOPMENT OF TRAVERSE BEARING REQUIRED FOR NEW PROJECT (AS PER SCOPE OF WORK) C Nonestab
Category : dp
Grade : Grade II
Size : S
2507 J.K.FENNER (INDIA) LIMITED
Khivraj Complex-II, 5th Floor No. 480, Anna Salai, Nandanam Chennai Tamil Nadu
PIN1 : 600035
Phone No. : 43994666
GSTIN : 33AAACJ7230N2ZI 		MRIFOO117F

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) CHAFF PAYLOAD FOR SRCR, MRCR, LRCR[61]() Specification : Please refer Expression of interest attached. C Nonestab
Category :
Grade : Grade III
Size : L
2508 NATIONAL INDUSTRIES
4458-63,Third Floor,Nai Sarak,Delhi-110006 NAI SARAK DELHI Delhi
PIN1 : 110006
Phone No. : 4236462
GSTIN : 07AAUPG6444L1Z4 		DELL07206D

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Tape Adhesive Brown 50 mm Duly Printed with OCF name or Trade Mark[21]() Specification : No.JSS:8046-6 & SS No.CIGS/SS/126(a) R Estab
Category :
Grade : Grade III
Size : S
2509 Astonish Engineering And Marketing
2085 VIJAYNAGAR COLONY NEAR S.P.COLLEGE Sadashiv Peth Pune Maharashtra
PIN1 : 411038
Phone No. : 9823036949
GSTIN : 27AAHPT7526M1ZZ 		AAHPT7526M

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6454000051 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY Description : 6454000051 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY() Specification : R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6454000051 SQUIB PLUG BRIDGED TO DRG NO ERDL DRG 1096 DET NO 1 TO DET NO 4 TO SPECN HEMRL PYRO PS 207 C Description : 6454000051 SQUIB PLUG BRIDGED TO DRG NO ERDL DRG 1096 DET NO 1 TO DET NO 4 TO SPECN HEMRL PYRO PS 207 C() Specification : 6454000051: SQUIB PLUG (BRIDGED) TO DRG NO. ERDL DRG 1096 DET NO 1 TO DET NO 4 TO SPECN HEMRL / PYRO/ PS/207 (C). R Estab
Category : ddp
Grade : 3
Size : S
2510 PRECISION MACHINES AND EQUIPMENTS PRIVATE LIMITED
NO9A MGROAD NSC BOSE NAGAR CHENNAI Tamil Nadu
PIN1 : 600116
Phone No. : 24767272
GSTIN : 33AABCP6592Q1ZR 		CHEP00966A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) RIGHT HAND HULL SIDE PLATE TO LF 6101201081[61]() Specification : RIGHT HAND HULL SIDE PLATE (LF 610201081) C Nonestab
2) LEFT HAND HULL SIDE PLATE TO LF 6101201059[61]() Specification : LEFT HAND HULL SIDE PLATE (LF 6101201059) C Nonestab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) PRODUCTION OF T90 MK III TURRET[62]() Specification : PRODUCTION OF T-90 MK III TURRET E Nonestab
2) PRODUCTION OF T90 MK III HULL UP TO FIRST STAGE MACHINING[62]() Specification : PRODUCTION OF T90 ,MKIII HULL UP TO FIRST STAGE MACHINING E Nonestab
Category :
Grade : Grade III
Size : M
2511 BURNPUR INDUSTRIES
Bartoria, PO: Mithani, Dist: Burdwan, West Bengal Bartoria Bartoria West Bengal
PIN1 : 713371
Phone No. : 2230604
GSTIN : 19AADFB1944R1ZZ 		AADFB1944R

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) LADDLE REFRACTORY LINING BRICK FOR LFVD[19]() Specification : AS PER SPECIFICATION R Nonestab
2) LINEAR REFRACTORIES FOR INGOT MOULD ( TYPE- A ) AS PER DRG.NO.- LFVD / 1000 / 13 R5.[19]() Specification : LINEAR REFRACTORIES FOR INGOT MOULD ( TYPE- A ) AS PER DRG.NO.- LFVD / 1000 / 13 R5. R Estab
3) LINER REFRACTORIES FOR RADIAL FORGING INGOT MOULD AS PER DRG. NO.LFVD/1000/13/1/R1.[19]() Specification : LINER REFRACTORIES FOR RADIAL FORGING INGOT MOULD AS PER DRG. NO.LFVD/1000/13/1/R1. R Nonestab
4) 4 WAY 8 MOULD BOTTOM POURING SET FOR 20 TON EAF AS PER MSF DRAWING NO:OH-390.[19]() Specification : 4 WAY 8 MOULD BOTTOM POURING SET FOR 20 TON EAF AS PER MSF DRAWING NO:OH-390. R Nonestab
5) 4 WAY 4 MOULD BOTTOM POURING SET FOR 20 TO EAF AS PER MSF DRAWING NO:0H-389.[19]() Specification : 4 WAY 4 MOULD BOTTOM POURING SET FOR 20 TO EAF AS PER MSF DRAWING NO:0H-389. R Nonestab
6) HIGH ALUMINA REFRACTORY CEMENT. TRADE NAME :"WHYTHEAT GRADE LWB SPECN: Al2O3: 90%MIN.,SiO2:2 TO 3 %, Fe2O3:0.75% (0.80% MAX) MAX.SERVICE TEMPERATURE:1750 DEG.C.MAX.GRAIN SIZE :5 MM. PACKED IN 50 KGS HDPE BAGS.[19]() Specification : HIGH ALUMINA REFRACTORY CEMENT. TRADE NAME :"WHYTHEAT GRADE LWB SPECN: Al2O3: 90%MIN.,SiO2:2 TO 3 %, Fe2O3:0.75% (0.80% MAX) MAX.SERVICE TEMPERATURE:1750 DEG.C.MAX.GRAIN SIZE :5 MM. PACKED IN 50 KGS HDPE BAGS. R Nonestab
7) HIGH ALUMINA ROOF SET FOR 15 TON ARC FURNACE AS PER MSF DRG. NO. 15-ARC/1000/28 R6[20]() Specification : HIGH ALUMINA ROOF SET FOR 15 TON ARC FURNACE AS PER MSF DRG. NO. 15-ARC/1000/28 R6 R Nonestab
8) ROOF DELTA CASTABLE.CHEMICAL COMPOSITION:Al2O3-80%MIN,Fe2O3-2% MAX,Cr2O3-3% MAX,ADDITIVE-2% SS FIBRE.PHYSICAL PROPERTIES BD(AT 110 DEG.C/24 HRS)-2.8 MIN,CCS(AT 110 DEG.C/24 HRS)- 450 KG/CM2 MIN, PLC% AT 1450 DEG C/4 HRS-(+-)1.0MAX,GRADING- 0-8 MM, PA[20]() Specification : ROOF DELTA CASTABLE.CHEMICAL COMPOSITION:Al2O3-80%MIN,Fe2O3-2% MAX,Cr2O3-3% MAX,ADDITIVE-2% SS FIBRE.PHYSICAL PROPERTIES BD(AT 110 DEG.C/24 HRS)-2.8 MIN,CCS(AT 110 DEG.C/24 HRS)- 450 KG/CM2 MIN, PLC% AT 1450 DEG C/4 HRS-(+-)1.0MAX,GRADING R Nonestab
9) BODY LINING BRICKS FOR 20/22 TON EAF AS PER DRG. NO-15ARC/1000/192.[19]() Specification : BODY LINING BRICKS FOR 20/22 TON EAF AS PER DRG. NO-15ARC/1000/192. R Nonestab
Category : DDP
Grade : I
Size :
2512 SUNRISE TOOLING SYSTEMS PVT LTD
PLOT NO 29 SECTOR 24 STATE BANK OF INDIA FARIDABAD Haryana
PIN1 : 121005
Phone No. : 4165100
GSTIN : 06AADCS9992D1Z0 		ABCDE12345

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) TA CLAMP MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
2) SET OF TA SHOE & TA GUIDE MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
3) TA LINK MACHINED[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : Grade III
Size : S
2513 Durga industrial corporation
14 bye lane Howrah Amta Road,Chasirmath,Dasnagar, howrah-711105 dasnagar ,chashir math Howrah West Bengal
PIN1 : 711105
Phone No. : 9804902305
GSTIN : 19AQCPG3866A7Z3 		AQCPG3866A

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]() Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505B (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380) R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]() Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593) C Nonestab
Category :
Grade : Grade III
Size : S
2514 ARUN ENGINEERING CONCERN
VILL - PAKURIA, P.O- LAXMANPUR,P.S - DOMJUR,HOWRAH-711114 LAXMANPUR HOWRAH West Bengal
PIN1 : 711114
Phone No. : 9163786478
GSTIN : 19ACKPN5349K1ZY 		ACKPN5349K

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]() Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505B (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380) R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9081001765 BEAM TO PT NO 2028682[90]() Specification : BEAM TO PT.NO. 2028682. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]() Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) HEAD AUTOMATIC COCKING RAMMER ASSY TO DRG NO 2007475 IN FC[71]() Specification : HEAD AUTOMATIC COCKING RAMMER ASSY. TO DRG NO. 2007475 IN F/C C Nonestab
Category :
Grade : Grade III
Size : S
2515 METAFORGE
PLOT NO. 43, GALI NO= 3-4, SAROORPUR INDUSTRAL AREA FARIDABAD Haryana
PIN1 : 121004
Phone No. : 2282165
GSTIN : 06AACFM1200A1ZE 		RDUPA1878K

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) TA CLAMP FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
2) SET OF TA SHOE & TA GUIDE FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
Category : ddp
Grade : Grade III
Size : S
2516 J.K. FENNER (INDIA) LTD
No.3, Melakkal Road, Kochadai , Madurai Melakkal Road Madurai Tamil Nadu
PIN1 : 625016
Phone No. : 43994666
GSTIN : 33AAACJ7230N1ZJ 		AAACJ7230N

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RUBBERISING OF METTALIC PIN(2015489041)[20]() Specification : RUBBERISING OF METALLIC PIN (DRG. NO.OFM-32842A) ALONG WITH TA CONTACT WIRE (DRG.NO.OFM-32838) AS PER SPECIFICATION NO.OFM/TDS/TECH/06B AND COMPLETE ASSEMBLY DRG.NO.OFM-32853 & OFM-32854. C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Engine Factory Avadi
Name Specification Use Status
1) INCLINED SHAFT GEAR(FULLY FINISHED)[62]() Specification : INCLINED SHAFT GEAR C Estab
2) GEAR (UPTO OPN NO. 30)[39]() Specification : GEAR (UPTO OPN NO. 30) C Estab
3) WATER PUMP DRIVE GEAR (FULLY FINISHED)[62]() Specification : WATER PUMP DRIVE GEAR C Estab
4) INTAKE CAMSHAFT GEAR (FULLY FINISHED)[62]() Specification : INTAKE CAMSHAFT GEAR C Estab
5) DRIVE GEAR (FULLY FINISHED)[62]() Specification : DRIVE GEAR C Estab
6) CLUSTER GEAR (FULLY FINISHED)[62]() Specification : CLUSTER GEAR (FULLY FINISHED) C Estab
7) PAIRED GEAR ASSY[62]() Specification : PAIRED GEAR ASSY C Estab
8) PAIRED GEAR[62]() Specification : PAIRED GEAR C Estab
9) CRANKSHAFT GEAR (UPTO OPN NO. 30)[39]() Specification : CRANKSHAFT GEAR (UPTO OPN NO. 30) C Estab
10) DRIVE GEAR (UPTO OPN NO. 70)[39]() Specification : DRIVE GEAR (UPTO OPN NO. 70) C Estab
11) Oil pump drive gear (fully finished)[62]() Specification : Oil pump drive gear (fully finished) C Estab
12) OIL PUMP GEAR (FULLY FINISHED)[62]() Specification : OIL PUMP GEAR (FULLY FINISHED) C Estab
13) Booster Pump gear (fully finished)[62]() Specification : Booster Pump gear (fully finished) C Estab
Category : ddp
Grade : Grade II
Size : L
1) Engine Factory Avadi
Name Specification Use Status
1) WATER PUMP DR.NO:SB 411-00-56() Specification : WATER PUMP DR.NO:SB 411-00-56 C Estab
Category : ddp
Grade : Grade II
Size : L
1) Engine Factory Avadi
Name Specification Use Status
1) WATER PUMP DR.NO:SB 20-11-00-1() Specification : WATER PUMP DR.NO:SB 20-11-00-1 C Estab
2) Gear of Crankshaft flywheel end (fully finished). DR.NO:3305-115-1() Specification : Gear of Crankshaft flywheel end (fully finished)..DR.NO:3305-115-1 C Estab
3) Gear DR.NO:20-12-85() Specification : Gear. DR.NO:20-12-85. C Estab
Category : ddp
Grade : Grade I
Size : L
1) Engine Factory Avadi
Name Specification Use Status
1) Tubing from Oil Filter to Main Oil HOse CQA (HV) 507-718E() Specification : Tubing from Oil Filter to Main Oil HOse CQA (HV) 507-718E R Estab
2) GEAR..(FULLY FINISHED) DR.NO: 20-12-54-2() Specification : GEAR..(FULLY FINISHED) DR.NO: 20-12-54-2 E Estab
3) GEAR.(FULLY FINISHED) DR.NO: 20-12-53-1() Specification : GEAR.(FULLY FINISHED). DR.NO: 20-12-54-2 E Estab
Category : ddp
Grade : Grade II
Size : L
1) Engine Factory Avadi
Name Specification Use Status
1) HOSE.[62]() Specification : 321-20 C Estab
2) Water Pump assy[62]() Specification : SB 20-11-00-6 C Estab
3) Booster Pump[62]() Specification : SB 332-00-11 E Estab
4) Hose..[62]() Specification : Hose.. C Estab
5) RING..[62]() Specification : RING.. C Estab
Category : ddp
Grade : Grade I
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) SEAL & SPRING SET / CQA(HV)5.43.004[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.004 E Nonestab
2) SEAL & SPRING ASSY / CQA(HV)5.53.000[62]() Specification : SEAL & SPRING ASSY / CQA(HV)5.53.000 E Nonestab
3) SEAL & SPRING SET / CQA(HV)5.45.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.45.001 E Nonestab
4) SEAL & SPRING SET / CQA(HV)5.51.002[62]() Specification : SEAL & SPRING SET / CQA(HV)5.51.002 E Nonestab
5) SEAL & SPRING SET / CQA(HV)5.43.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.001 E Nonestab
6) SEAL & SPRING SET / CQA(HV)5.43.002[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.002 E Nonestab
7) SEAL & SPRING SET / CQA(HV)5.43.003[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.003 E Nonestab
8) SEAL & SPRING SET / CQA(HV)5.51.000[62]() Specification : SEAL & SPRING SET / CQA(HV)5.51.000 E Nonestab
9) SEAL & SPRING SET / CQA(HV)5.51.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.51.001 E Nonestab
10) SEAL & SPRING SET / CQA(HV)5.52.000[62]() Specification : SEAL & SPRING SET / CQA(HV)5.52.000 E Nonestab
11) SEAL & SPRING SET / CQA(HV)5.52.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.52.001 E Nonestab
12) SEAL & SPRING SET / CQA(HV)5.56.000[62]() Specification : SEAL & SPRING SET / CQA(HV)5.56.000 E Nonestab
13) CUP / 172.46.018CB[62]() Specification : CUP / 172.46.018CB E Nonestab
14) CUP / 172.46.018CBACB[62]() Specification : CUP / 172.46.018CBACB E Nonestab
Category : p
Grade : Grade I
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) SEAL & SPRING SET / CQA(HV)5.43.004[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.004 E Nonestab
2) SEAL & SPRING ASSY / CQA(HV)5.53.000[62]() Specification : SEAL & SPRING ASSY / CQA(HV)5.53.000 E Nonestab
3) SEAL & SPRING SET / CQA(HV)5.45.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.45.001 E Nonestab
4) SEAL & SPRING SET / CQA(HV)5.51.002[62]() Specification : SEAL & SPRING SET / CQA(HV)5.51.002 E Nonestab
5) SEAL & SPRING SET / CQA(HV)5.43.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.001 E Nonestab
6) SEAL & SPRING SET / CQA(HV)5.43.002[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.002 E Nonestab
7) SEAL & SPRING SET / CQA(HV)5.43.003[62]() Specification : SEAL & SPRING SET / CQA(HV)5.43.003 E Nonestab
8) SEAL & SPRING SET / CQA(HV)5.51.000[62]() Specification : SEAL & SPRING SET / CQA(HV)5.51.000 E Nonestab
9) SEAL & SPRING SET / CQA(HV)5.51.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.51.001 E Nonestab
10) SEAL & SPRING SET / CQA(HV)5.52.000[62]() Specification : SEAL & SPRING SET / CQA(HV)5.52.000 E Nonestab
11) SEAL & SPRING SET / CQA(HV)5.52.001[62]() Specification : SEAL & SPRING SET / CQA(HV)5.52.001 E Nonestab
12) SEAL & SPRING SET / CQA(HV)5.56.000[62]() Specification : SEAL & SPRING SET / CQA(HV)5.56.000 E Nonestab
13) CUP / 172.46.018CB[62]() Specification : CUP / 172.46.018CB E Nonestab
14) CUP / 172.46.018CBACB[62]() Specification : CUP / 172.46.018CBACB E Nonestab
Category : p
Grade : Grade I
Size : L
2517 COATEX INDUSTRIES
25/161, LANE NO 1, ADRARSHCOLONEY LANE NO 1 PUNE Maharashtra
PIN1 : 411015
Phone No. : 9422305529
GSTIN : 27AGYPG2378M1ZJ 		COATEX1234

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 0101012130 SEAL TO DRG NO. 6390 155 RE 1[01]() Specification : SPECN NO. IS-5872-1990 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451100 SADDLE ASSLY FOR CHARGE 145 MM[63]() Specification : QAP NO. HEMRL/HE/ ADD/08/01 REV. 00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6191700018 BRAKE RING BIG FOR PINAKA ROCKET[61]() Specification : BRAKE RING (BIG) FOR PINAKA ROCKET TO ARDE DRG. NO. 8603 03 99 00 00 002 00DA & QAP NO. ARDE/PINAKA/PNWH/QAP/011 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6334401000 LINERDRG. HEMRL/1437 DET.5 HDC-I[63]() Specification : LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5 C Nonestab
2) 6334402100 LINER FOR HDC-II DRG.HEMRL/1438,D-5[63]() Specification : LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6334402000 MS BLOCK FOR PROFING HDC I AND II[63]() Specification : M.S. BLOCK (FOR PROOFING OF HDC-I&II) TO DRG.NO.FT/XIV/007B C Nonestab
2) 6334401100 SET A FOR HDC I CONSISTING OF 4 NOS[63]() Specification : SET`A' CONSISTING OF:A)CASING(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.2 QTY:1 NO,(B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1169 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.NO.HEMRL/SK/1169 DET. NO.9 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER TO DRG.NO.HEMRL C Nonestab
3) 6334402200 SET A FOR HDC II CONSISTING OF[63]() Specification : SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/11 C Nonestab
4) 6334401200 SET B SADDLE ASSY CONSIST 4 HDC I[63]() Specification : SET`B' CONSISTING OF: A)SADDLE TO DRG.NO. HEMRL /SK/1169/DET.NO.12 QTY:1 NO, (B)UPPER LEG(SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1169 DET.NO.13 QTY:3 NOS, (C)LOWER LEG(SUB-ASSLY) TO DRG.NO. HEMRL/SK/1169 DET.NO.16 QTY:3 NOS,(D)ALLEN SCREW M5 X 1 C Nonestab
5) 6334402300 SET B SADDLE ASSY FOR HDC II CON 4[63]() Specification : SET`B'(SADDLE ASSY) CONSISTING OF: A) SADDLE TO DRG.NO.HEMRL/ SK/1173 DET.NO.14 QTY:1 NO, (B)UPPER LEG(SUB-ASSY) TO DRG.NO. HEMRL/SK/1173 DET.NO.15 QTY:3 NOS, (C)LOWER LEG(SUB-ASSY) TODRG.NO. HEMRL/SK/1173 DET.NO. 18 QTY: 3 NOS, (D) ALLEN C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6410900330 BASE TO DRG.4-025998 081 125MM HEAT[64]() Specification : SPECN. NO. JSS 9330-05 C Nonestab
2) 6410900110 INSERT DETAIL NO.67 FOR 125 MM HEAT[64]() Specification : MATERIAL SPECIFICATION GOST. 20437-75 OR IND/ME/951 (PROV) GRADE "A". R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330685101 L T SQUIB PLUG BRIDGED TO DRG 563[63]() Specification : L.T.SQUIB BRIDGED TO DRG NO.ERDL 563 DETAIL NO. 6 & 7 ( 7- STRAND TINNED COPPER WIRE TO DEF STANDARD -61-12 PART 6/ISSUE 4 WILL BW SUPPLIED BY OFCH) R Nonestab
2) 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]() Specification : LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008. C Nonestab
3) 6330901200 SADDLE ASSLY TO DRG NO HE CAST 021 DET 1 CONSISTING OF 4 COMPONENTS TO DRG NO HE CAST 021 DET 2 TO 4 AND ALLEN SCREWS M5 X 5 AND QAP NO HEMRL HE ADD 08 01 REV00 OF 09 2008[63]() Specification : SADDLE ASSLY TO DRG.NO.HE/CAST 021 DET 1 CONSISTING OF 4COMPONENTS TO DRG. NO. HE/CAST 021 DET 2 TO 4 & ALLEN SCREWS M5 X 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008. C Nonestab
4) 6356000012 EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF A DETONATOR TUBE ARDE DRG NO 9707 00 01 01 05 001 00TAB SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 05 19 000 00TAC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 17 19 001 00TA[63]() Specification : EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF(A) DETONATOR TUBE ARDE DRG.NO.9707 00 01 01 05 001 00TAB)SQUIB PLUG (EMPTY)ARDE DRG NO.9707 00 01 05 19 000 00TAC)PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG.NO.970700 01 17 19 001 00TA C Nonestab
5) 6454000058 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY[64]() Specification : SQUIB PLUG (BRIDGED)(EMPTY) FOR CONTAINER CLEANING CHARGE TODRAWING NO.ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK-II-FILLING AND ASSEMBLY. C Nonestab
6) 6191700144 SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130[61]() Specification : SQUIB PLUG BRIDGED SLEEVE ASSEMBLY EMPTY DRG NO HEMRL EED H 130 C Nonestab
Category :
Grade : Grade III
Size : S
2518 NITIKA ENTERPRISES
PLOT NO.61/5 H, INDUSTRIAL AREA, N.I.T FARIDABAD NEAR WHIRLPOOL CHOWK FARIDABAD Haryana
PIN1 : 121001
Phone No. : 4149845
GSTIN : 06AAUPC8420A1Z1 		RTKA04250B

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
2) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
3) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
4) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
5) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
6) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
7) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
8) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
9) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Estab
10) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
11) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
12) PLUG A/C 34 1000 LBS (6220501010)[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
13) PLUG FASTENING 250 KG (6241101124)[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
14) PLUG (MCD) 250KG (6240901205)[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED] DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
15) PLUG 450 KG (MCD) (6231101105)[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
16) PLUG DUMMY 250 KG (6241101114)[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
17) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
18) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
19) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
20) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
21) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
22) Protecting Ring Assly 1000LBS (6220900610)[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG. NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES], CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER 8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP C Nonestab
23) ROLLING RING ASSEMBLY 250KG (6241100114)[62]() Specification : ROLLING RING ASSY. TO DRG No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED] C Nonestab
24) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
25) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
26) HEX SOCKET SET SCREW (BT) 450 KG (1727041225)[17]() Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP) C Nonestab
27) HEX SOCKET HD CAP SCREW M6X25 (1732040625)[17]() Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT]. C Nonestab
28) HEX SOCKET SET SCREW M5 450KG (6230901104)[62]() Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP) C Nonestab
29) LOCKING SCREW FOR DETO. HOLDER (6220901100)[62]() Specification : LOCKING SCREW (FOR DETONATOR HOLDER) ARM-1172A-3 DRG. ENCLOSED]. C Nonestab
30) SCEWFOR RING NUT (6220900800)[62]() Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED] C Nonestab
31) SOCKET SET SCREW FOR BASE TRANSIT (1751020207)[17]() Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED]. C Nonestab
32) SET OF TA SHOE & TA GUIDE MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
Category : ddp
Grade : Grade III
Size : S
2519 PATIL AEROSPACE ENGINEERING PRIVATE LIMITED
A-60, MIDC, Baramati, Dist-Pune-413133 Airport road BARAMSTI Maharashtra
PIN1 : 413133
Phone No. : 221599
GSTIN : 27AAMCP2673D1ZA 		AAMCP2673D

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) BOX STEEL NO S 6 MK1 DRG ARDE 2225[65]() Specification : DRG. NO. ARDE 2225 SHEET NO.3 C Nonestab
2) BOX B 184 MK 1 W O SEPARATOR[65]() Specification : IA 1169 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF 250 KG STEEL SHELL L F NO 6241101206[62]() Specification : MACHINING OF 250KG STEEL BOTTLE CASTING (DRG.NO.OFM-10057 AS PER DRG.NO.-OFM-33042 & ANNEXURE-A. C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) EMPTY CUP FOR DET 100 MG[60]() Specification : DRG. NO AFK/SK-246-05 SHT. NO. 2 C Nonestab
2) A S ROCKET RGB 60 NASK 1134 1 P[60]() Specification : DRG. NO. NASK 1134/1(P) GENERAL ASSEMBLY C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) 6012000030 BRASS CUP DRAWING NO AFK DEV 303[60]() Specification : BRASS CUP FOR CARTG SA 7.62 MM BLANK AND 0.30 ''-06 SPORTING AMMUNITION CASES AS PER DRAWING NO AFK/DEV- 303 R Nonestab
2) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]() Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
2) SHELL003 FOR 81MM SMOKE 3D6[62]() Specification : S PER DRAWING NO.4-26941 DET 040CB C Nonestab
Category :
Grade : Grade III
Size : S
2520 BM INDUSTRIES
PATTARAVAKKAM,, 11, GNANAMOORTHY NAGAR EXTN.,, CHENNAI, Tiruvallur, Tamil Nadu, 600053 Railway Station Road Chennai Tamil Nadu
PIN1 : 600053
Phone No. : 9941635878
GSTIN : 33AJFPC6761Q1ZV 		AJFPC6761Q

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GEAR CROWN[74]() Specification : GEAR CROWN (View) AS PER DRG 019789A-00 FOR TRAVERSE BEARING ASSY OF SRCG. C Nonestab
2) ADAPTOR MAGAZINE[74]() Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
3) COVER BLIND FRONT FINISH[74]() Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
4) COVER BLIND POD FINISHED[74]() Specification : COVER BLIND,POD,FINISHED(VIEW)Y25649A-01 FOR PEDESTAL ASSY OF SRCG C Nonestab
5) BOLT CENTERING[74]() Specification : BOLT, CENTERING (View)020054A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
6) WASHER SPHERICAL[74]() Specification : WASHER SPHERICAL (View) AS PER DRG.064414A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
7) HOUSING STOPPER LEFT SIDE[74]() Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
8) INSERT M4 ALTERED ITEM[74]() Specification : INSERT M4, ALTERED ITEM (View)AS PER DRG 031682A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
9) BOLT GEAR TRAVERSE[74]() Specification : BOLT GEAR, TRAVERSE (View)AS PER DRG 031669A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
10) BELLEVILLE LEVER TRAVERSE[74]() Specification : BELLEVILLE, LEVER TRAVERSE (View)AS PER DRG 062346A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
11) BASE STOP B[74]() Specification : BASE STOP B (View)AS PER DRG 019895A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
12) SCREW SPRING INTERFACE[74]() Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COVER FRONT PEDESTAL[74]() Specification : COVER FRONT PEDESTAL AS PER.Y25684A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
2) ARM COVER LEFT[74]() Specification : ARM COVER LEFT (View) AS PER.Y25685A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
3) ARM COVER RIGHT[74]() Specification : ARM COVER RIGHT (View) AS PER.DGRNO.Y25686A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
4) BRACKET TOP COVER[74]() Specification : BRACKET TOP COVER (View) AS PER.DRG.NO.Y25687A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
5) BRACKET BASKET RIGHT WELD[74]() Specification : BRACKET, BASKET,RIGHT, WELD/Y19378A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
6) BRACKET BASKET LEFT WELD[74]() Specification : BRACKET, BASKET, LEFT, WELD/Y19376A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
7) CASE DESICCANT[74]() Specification : CASE, DESICCANT/Y17736A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) WRENCH ADJUSTING FORESIGHT AND LOCK NUT FORE SIGHT TO DRAWING NO R F I SK NO 1051 STR3 MODIFIED FOR RIFLE 7POINT62 mm1A1[70]() Specification : AS PER DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1) E Nonestab
2) NUT LOCK FORESIGHT TO D S CAT No 5310 003169 D C No 24755 SA DATED 21 06 2000 FULLY FINISHED CONDITION WITH FIRMS MATERIAL[70]() Specification : AS PER D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL. C Nonestab
3) SLEEVE KEY TO DRG NO 44P 04008ST 2[70]() Specification : AS PER OFB REQUIREMENTS C Nonestab
4) CLAMP NUT 44P 04007[70]() Specification : AS PER OFT REQUIREMENTS R Nonestab
5) SHAFT FOOT BALL DRIVE D12x4 AS PER DRG NUMBER 074260A AND NUT BALL FOOT BALL SCREW DIA 12xPITCH 4MM AS PER SPECIFICATION KGT 12x4FGRRH1SAG MAKE EICHENBERGER OR EQUIVALENT[74]() Specification : SHAFT FOOT BALL DRIVE D12x4 AS PER DRG NUMBER 074260A AND NUT BALL FOOT BALL SCREW DIA 12xPITCH 4MM AS PER SPECIFICATION KGT 12x4FGRRH1SAG MAKE EICHENBERGER OR EQUIVALENT R Nonestab
6) PIN KEY[74]() Specification : PIN KEY (View)066425A-00 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
7) Nut Bolt Latch Rod OOW50BMG as per Drawing No 5013526 of M2HB Gun[74]() Specification : Nut, Bolt Latch Rod, OOW50BMG as per Drawing No. 5013526 of M2HB Gun C Nonestab
8) HOUSING STOPPER LEFT SIDE[74]() Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
9) BOLT HOUSING[74]() Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
10) SHAFT ENCODER CASING[74]() Specification : SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
11) BUMPER ARM[74]() Specification : BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
12) BUMPER ARM LOCK[74]() Specification : BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
13) BLOCKING ELEMENT[74]() Specification : BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
14) BRACKET ASSY 1[74]() Specification : BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG C Nonestab
15) SECTOR BACK COVER FNSH[74]() Specification : SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
16) SECTOR FRONT COVER FNSH[74]() Specification : SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
17) ADAPTOR SPRING[74]() Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG C Nonestab
18) LIMITER EXTERNAL[74]() Specification : LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
19) WASHER FLAT CRES M5 A4[74]() Specification : WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
20) SUPPORT ELEVATION DRIVE[74]() Specification : SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
21) BOLT GEAR ELEVATION[74]() Specification : BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
22) BRACKET ASSY2[74]() Specification : BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG C Nonestab
23) SPACER OIL RETAINER[74]() Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
24) SUPPORT GEAR TRAVERSE[74]() Specification : SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
25) ANGLE LIMITER RIGHT[74]() Specification : ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
26) ANGLE LIMITER LEFT[74]() Specification : ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
27) BASE STOP A[74]() Specification : BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
28) COVER SHAFT ENCODER[74]() Specification : COVER SHAFT ENCODER/ DRG NO.Y25635A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
29) PISTON INNER[74]() Specification : PISTON INNER (View) AS PER DRG NO.074263A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
30) COVER MOTOR[74]() Specification : COVER, MOTOR AS PER DRG NO.Y18725A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
31) SPACER ROTOR[74]() Specification : SPACER ROTOR (View) AS PER DRG NO.074312A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
32) KEY[74]() Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
33) STOPPER[74]() Specification : STOPPER (View) AS PER DRG NO.074266A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
34) NUT[74]() Specification : NUT (View) AS PER DRG NO.074267A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
35) NUT SOLENOID[74]() Specification : NUT SOLENOID AS PER DRG NO.065454A-00 FOR SOLENOID SHOT ASSY OF SRCG C Nonestab
36) KEY AS PER DRG NO 074811A 00[74]() Specification : KEY (View) AS PER DRG NO.074811A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) WASHER SAFETY[74]() Specification : WASHER SAFETY (View) AS PER DRG NO.074265A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
2) WASHER ELASTOMER[74]() Specification : WASHER ELASTOMER (View) AS PER DRG NO.Y01876A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
3) SPINDLE ALTERED[74]() Specification : SPINDLE, ALTERED (View) AS PER DRG NO.074260A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
4) SCREW M10[74]() Specification : SCREW M10 (View) AS PER DRG NO.075871A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
5) BRACKET[74]() Specification : BRACKET AS PER DRG NO.Y17473A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
6) SCREW SHANK[74]() Specification : SCREW SHANK, AS PER DRG NO.Y00964A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
7) SCREW HEAD COCKING[74]() Specification : SCREW HEAD COCKING AS PER DRG NO.066628A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
8) GUIDE RECOIL REAR[74]() Specification : GUIDE RECOIL, REAR AS PER DRG NO.063796A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
9) BUSHING GUIDE FRONT[74]() Specification : BUSHING GUIDE, FRONT AS PER DRG NO.063911A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
10) GUIDE RECOIL FRONT[74]() Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
11) BUSHING THREAD REAR[74]() Specification : BUSHING THREAD REAR 1 (View) AS PER DRG NO.077853A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
12) COVER SOLENOID 2[74]() Specification : COVER SOLENOID 2 AS PER DRG NO.065283A-00 FOR SOLENOI SHOT ASSY OF SRCG C Nonestab
13) ROD LIMITER[74]() Specification : ROD LIMITER (View) AS PER DRG NO.066426A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
14) PLUG SPRING[74]() Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
15) BODY EXTERNAL WELDED[74]() Specification : BODY EXTERNAL WELDED (VIEW)064706A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COVER SOLENOID 1[74]() Specification : COVER SOLENOID 1 (VIEW) AS PER DRG NO.065281A-00 FOR SOLENOID SHOT ASSY OF SRCG C Nonestab
2) COVER SOLENOID 2[74]() Specification : COVER SOLENOID 2 AS PER DRG NO.065283A-00 FOR SOLENOI SHOT ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BUSHING PIN[74]() Specification : BUSHING PIN/065453A-00 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
2) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
3) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]() Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR C Nonestab
4) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR C Nonestab
5) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR C Nonestab
6) Rivet Belt Holding Pawl Bracket OOW50BMG as per Drg No 7266329 of M2HB Gun[74]() Specification : Rivet, Belt Holding Pawl Bracket, OOW50BMG as per Drg. No. 7266329 of M2HB Gun C Nonestab
7) Rivet Top and Bottom plate OOW50BMG as per Drg No 5009387 of M2HB Gun[74]() Specification : Rivet, Top & Bottom plate, OOW50BMG as per Drg. No. 5009387 of M2HB Gun C Nonestab
8) Rivet Main Trunnion OOW50BMG as per Drg No 5013558 of M2HB Gun[74]() Specification : Rivet, Main Trunnion, OOW50BMG as per Drg. No. 5013558 of M2HB Gun C Nonestab
9) Rivet Solid OOW50BMG as per Drg No 5009292 of M2HB Gun[74]() Specification : Rivet, Solid, OOW50BMG as per Drg. No. 5009292 of M2HB Gun C Nonestab
10) Rivet Bolt Latch Bracket OOW50BMG as per Drg No 5013522 of M2HB Gun[74]() Specification : Rivet, Bolt Latch Bracket, OOW50BMG as per Drg. No. 5013522 of M2HB Gun C Nonestab
11) Solid Lower Trunnion Rivet OOW50BMG as per Drg No 5009799 of M2HB Gun[74]() Specification : Solid Lower Trunnion Rivet, OOW50BMG as per Drg. No. 5009799 of M2HB Gun C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SPACER BEARING[74]() Specification : SPACER BEARING (View)074311A-00 FOR COCKING MECH. ASSY OF SRCG.. C Nonestab
2) BUSHING THREAD FRONT 1[74]() Specification : BUSHING THREAD FRONT 1 (View)077851A-00 FOR CRADLE WEAPON ASSY OF SRCG. C Nonestab
3) BUSHING REAR[74]() Specification : BUSHING, REAR/Y18946A-00 FOR CRADLE WEAPON ASSY OF SRCG. C Nonestab
4) BUSHING FRONT 1[74]() Specification : BUSHING FRONT 1 (View)077855A-00 FOR CRADLE WEAPON ASSY OF SRCG. C Nonestab
5) SLEEVE LIMITER[74]() Specification : SLEEVE LIMITER (View)066427A-00 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
6) PUSHER TRIGGER[74]() Specification : PUSHER TRIGGER (View)Y05288A-01 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
7) SCREW SPECIAL[74]() Specification : SCREW SPECIAL/065603A-00 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
8) AXIS 1[74]() Specification : AXIS 1/065289A-00 FOR STAND WEAPON ASSY OF SRCG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
2) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]() Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025 C Nonestab
Category :
Grade : Grade III
Size : S