Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*
R
Nonestab
2) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
3) HAMMER FOR LMG IN FINISHED CONDITION[70]()
Specification : HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL ENCLOSED PART NO 1156282[90]()
Specification : LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL(ENCLOSED) PART NO 1156282.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
2) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]()
Specification : As per Drawing
E
Nonestab
3) LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
4) CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12 7 MM AD GUN A 2212[70]()
Specification : AS PER DRG OF "CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12.7 MM AD GUN (A 2212)
"
R
Nonestab
5) 20mm Bolt Assembly to Drg No 44P03000 required for AMR[70]()
Specification : 20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
E
Nonestab
6) 14 5 mm Bolt Assembly[70]()
Specification : 14.5 mm Bolt Assembly as per drawing 44P 14000
E
Nonestab
7) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
8) CYLINDER PRE MACHINING[70]()
Specification : CYLINDER PRE-MACHINING 90%
C
Nonestab
9) CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637[70]()
Specification : CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637
C
Nonestab
10) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
E
Nonestab
11) AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL[70]()
Specification : AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL
E
Nonestab
12) BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL[70]()
Specification : BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL
E
Estab
13) BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3[70]()
Specification : AS PER DRAWING BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3
R
Nonestab
14) 62C 7101 250 M3 BODY TRIGGER MECH 2 2 CASTING DRG NO 6P 11 7 1[70]()
Specification : AS PER DRAWING 62C 7101 250 M3 BODY TRIGGER MECH 2-2 CASTING DRG NO 6P 11 7 1
R
Nonestab
15) 62C 7102 250 I3 SIGHT BED BODY TRIGGER MECH CASTING DRG NO 6P 11 7 2[70]()
Specification : AS PER DRG 62C 7102 250 I3 SIGHT BED BODY TRIGGER MECH CASTING DRG NO 6P 11 7 2
R
Nonestab
16) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
E
Nonestab
Category :
Grade : Grade III
Size :
M
1Engine Factory Avadi
Name
Specification
Use
Status
1) Regulator Cover Casting
315-620-7()
Specification : 315-620-7
C
Estab
2) ELBOW CYLINDER HEAD LH MACHINING - Drg.No.406-35-18()
Specification : 406-35-18
C
Estab
3) Regulator Body Casting
Drg. no. 315-619-19()
Specification : 315-619-19
C
Estab
4) Oil Pump Body
Drg.No. 20-12-124-8()
Specification : 20-12-124-8
C
Estab
5) Outlet RH
Drg.No.406-30-11A()
Specification : 406-30-11A
C
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DIAPHRAGM (ADAPTER) FOR RGB -60[33]()
Specification : AS PER DRAWINGS
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Mounting 81MM Mortar E 1 General Assembly to Part No AMG 72895 DS CAT No 1015 001480 Drgs Specifications of Sub Assemblies Components as per Annexure No 81MM MOR ODC Annexure 002 for assembly of 81MM Mortar Ordnance[63]()
Specification : Mounting, 81MM Mortar E-1 (General Assembly) to Part No. AMG 72895 (DS CAT No. 1015-001480), Drgs, Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/Annexure/002 for assembly of 81MM Mortar Ordnance
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF 250 KG STEEL BOTTLE CASTING 6241101206[62]()
Specification : AS PER OFM SPECIFICATION
E
Nonestab
Category : ddp
Grade : 3
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm assembly()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
2) Loading Tray Assembly[62]()
Specification : All the tender related documents (Terms & Conditions and Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
3) BARREL BRUSH[65]()
Specification : BARREL BRUSH TO PART NO.176-4327FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
P
Nonestab
4) CUSHION[65]()
Specification : CUSHION TO DRG NO.166-411FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
5) EXTRACTOR[65]()
Specification : EXTRACTOR TO PART NO.161-1624 FOR SMT/STE COMPONENTS OFSHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
6) EXTRACTOR BOX[65]()
Specification : EXTRACTOR BOX TO DRG NO. 161-1664FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
7) OBTURATOR SEAT EXTRACTION TOOL[65]()
Specification : OBTURATOR SEAT EXTRACTION TOOL TO DRG.NO.166-968 FOR SMT/STECOMPONENTS OF SHARANG ORDNANCE.,
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
10) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
11) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
12) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
13) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
14) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
15) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
2) Loading Tray Assembly[62]()
Specification : All the tender related documents (Terms & Conditions and Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
3) BARREL BRUSH[65]()
Specification : BARREL BRUSH TO PART NO.176-4327FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
R
Nonestab
4) CUSHION[65]()
Specification : CUSHION TO DRG NO.166-411FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
5) EXTRACTOR[65]()
Specification : EXTRACTOR TO PART NO.161-1624 FOR SMT/STE COMPONENTS OFSHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
6) EXTRACTOR BOX[65]()
Specification : EXTRACTOR BOX TO DRG NO. 161-1664FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
7) OBTURATOR SEAT EXTRACTION TOOL[65]()
Specification : OBTURATOR SEAT EXTRACTION TOOL TO DRG.NO.166-968 FOR SMT/STECOMPONENTS OF SHARANG ORDNANCE.,
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
10) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
11) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
12) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
13) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
14) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
15) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
16) CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance[63]()
Specification : CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance
C
Nonestab
17) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
18) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
19) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
2) Loading Tray Assembly[62]()
Specification : All the tender related documents (Terms & Conditions and Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
3) BARREL BRUSH[65]()
Specification : BARREL BRUSH TO PART NO.176-4327FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
P
Nonestab
4) CUSHION[65]()
Specification : CUSHION TO DRG NO.166-411FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
5) EXTRACTOR[65]()
Specification : EXTRACTOR TO PART NO.161-1624 FOR SMT/STE COMPONENTS OFSHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
6) EXTRACTOR BOX[65]()
Specification : EXTRACTOR BOX TO DRG NO. 161-1664FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
7) OBTURATOR SEAT EXTRACTION TOOL[65]()
Specification : OBTURATOR SEAT EXTRACTION TOOL TO DRG.NO.166-968 FOR SMT/STECOMPONENTS OF SHARANG ORDNANCE.,
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
10) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
11) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
12) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
13) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
14) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
15) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
16) CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance[63]()
Specification : CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance
C
Nonestab
17) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
18) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
19) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
20) CASE TO DRG NO D 3053014 REV A FOR DHANUSH ORDNANCE[63]()
Specification : CASE TO DRG NO D 3053014 REV A FOR DHANUSH ORDNANCE
1) MACHINING JOB WORK OF LUG 318 ITEM CODE 9449580029[94]()
Specification : AS PER ANNEXURE-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
2525
India International House Limited
A6/1-2 site 4 industrial area sahibabad Ghaziabad site 4 industrial area sahibabad Ghaziabad Uttar Pradesh
PIN1 : 201005
Phone No. : 43575156 GSTIN :
09AAACI2399P1ZV
3) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*2
C
Nonestab
4) Guide Casting and Machining as per drawing No SK 6501 TE[70]()
Specification : Guide- Casting and Machining as per drawing No. SK- 6501 /TE
C
Nonestab
5) Rod Finish as per drawing no SK 6503 TE[70]()
Specification : Rod Finish as per drawing no SK 6503 TE
C
Nonestab
6) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
7) Receiver Body for 9X19 mm Machine Pistol[70]()
Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing
C
Nonestab
8) Barrel Adapter Left for 9X19 mm Machine Pistol[70]()
Specification : Barrel Adapter Left for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 003 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
2) Body Finished Through IC Machining route for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
3) BUTTON CATCH MAGAZINE FOR JVPC[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-04-00-02-004-00DA
C
Nonestab
4) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
5) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
6) NUT AS PER DRAWING NO SK 6513 TE[70]()
Specification : NUT AS PER DRAWING NO SK 6513 TE
C
Nonestab
7) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
8) RETAINER AS PER DRAWING NO SK 6521 TE[70]()
Specification : RETAINER AS PER DRAWING NO SK 6521 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Trigger Assy. DS CAT No. 1005-560044[70]()
Specification : AS PER DRG.
C
Nonestab
2) BIPOD ASSY. TO DSCAT NO. 1005-557897 FOR MG 5.56 MM consisting of 24 components[72]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING UPPER WELDING FOR JVPC[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
2) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]()
Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS
C
Nonestab
2) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]()
Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S
C
Nonestab
3) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]()
Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS
C
Nonestab
4) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
5) LUG SUSPENSION NO 318 Item code 6250700175[62]()
Specification : LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) NUT AS PER DRAWING NO SK 6513 TE[70]()
Specification : NUT AS PER DRAWING NO SK 6513 TE
C
Nonestab
4) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
5) RETAINER AS PER DRAWING NO SK 6521 TE[70]()
Specification : RETAINER AS PER DRAWING NO SK 6521 TE
C
Nonestab
6) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
7) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
8) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
9) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) LOCKING PIECE FOR SHARANG ORD[76]()
Specification : LOCKING PIECE AS PER DRG.NO.166-217
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FIXING PIN 1185[76]()
Specification : FIXING PIN AS PER DRG.NO.176-1185 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAP FOR SHARANG 161 473[76]()
Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) KEY AS PER DRG 161 480[76]()
Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH CASTING OF HOUSING AS PER DRG 161 467 FOR SHARANG[76]()
Specification : FINISH CASTING OF HOUSING AS PER DRG 161 467 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH CASTING OF PIN HOUSING AS PER DRG 176 1160[76]()
Specification : FINISH CASTING OF PIN HOUSING AS PER DRG 176 1160 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH CASTING OF BODY LOCK SAFETY 161 682[76]()
Specification : FINISH CASTING OF BODY LOCK SAFETY AS PER DRG NO. 161-682 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF KEY 176 1104 FOR SHARANG[76]()
Specification : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH CASTING 175 295 FOR SHARANG[76]()
Specification : FINISH CASTING OF CATCHER AS PER DRG NO 175-295 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) COLLAR SHAFT AS PER DRG No 3040 016131[41]()
Specification : COLLAR SHAFT AS PER DRG No 3040 016131
C
Estab
2) TRIGGER AS PER DRG NO SK 02045[70]()
Specification : TRIGGER AS PER DRG NO SK 02045
E
Estab
3) CAM CYLINDER AS PER DRG NO SK 02049[70]()
Specification : CAM CYLINDER AS PER DRG NO SK 02049
E
Estab
Category :
Grade : Grade III
Size :
S
2526
NITIN CASTINGS LTD
231, 2ND FLOOR, RAHUL MITTAL INDUSTRIAL PREMISES-, CO-OPSOC. LTD., SANJAY BUILDING NO.3, SIR M V ROAD, ANDHERI EAST MUMBAI, Mumbai City, Maharashtra, India, 400059 SIR M V ROAD, ANDHERI EAST MUMBAI Maharashtra
PIN1 : 400059
Phone No. : 25985900 GSTIN :
26AACCA2988C1ZT
1) TAPE PARA ARAMID(KEVLAR) 21 MM B.S.-800 KGf for B.P.L.C.A.[2010797685]()
Specification : SPECN-ADRDE/SPECN/2002/57 THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 105 M (EXCLUTING SAMPLING ) WITHOUT ANY FLAG OTHERWISE THAT ROLL WILL BE TREATED AS SHORT LENGTH.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Equipment Factory Hazaratpur
[ENR Registration]
Name
Specification
Use
Status
1) WEBBING POLYESTER UVR TREATED BLACK 40 MM
Description : WEBBING POLYESTER UVR TREATED BLACK 40MM()
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
C
Nonestab
Category :
Grade : Grade III
Size :
L
2529
Hilife Paints & Chemical Industries
10/6, 'L' Road, Belgachia, Howrah-711108, West Bengal 10/6, 'L' Road, Belgachia Howrah West Bengal
PIN1 : 711108
Phone No. : 26514352 GSTIN :
19AGPPC6903M1ZY
1) Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirement on WJ[00]()
Specification : Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirem
1) Link for AO 18 AK 630 Drg no 3 AO 18 001 AS PER TECH SPECN NO 3 AO 18 001 TY NASK 835 PROV[72]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()
Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]()
Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) COLLECTOR MANIFOLD ASSY AK 630 SB 108 SB[72]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol[70]()
Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) Magazine to Part No IQX 12 for Fuze 162 Mk 8 Mk 9[63]()
Specification : AS PER DRAWING
C
Nonestab
2) STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010[63]()
Specification : AS PER DRAWING
C
Nonestab
3) TUBE BLANK TO DRG NO OTF S 006 FOR 125 mm HEAT SHELL[63]()
Specification : TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL
R
Nonestab
4) SHUTTER IN F COND TO DRG NO IQX 7[63]()
Specification : SHUTTER TO DRG NO IAFD 38 OR IQX 7 IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
2) 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A[91]()
Specification : MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A
C
Nonestab
2) SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203[91]()
Specification : SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203
R
Nonestab
Category :
Grade : Grade III
Size :
S
2534
MOTHERSON SUMI SYSTEMS LIMITED
SURVEY No. 348/1A/18, 348/2-5, 355/3 KANCHEEPURAM CHENNAI TAMILNADU
PIN1 : 603202
Phone No. : 9840386212
1) MFG AND SUPPLY OF ROUGH MACHINED BODY TO DRG NO 118 BODY 3400 AS PER SCOPE OF WORK MA 11 110 8 24 DT 15 06 2017[80]()
Specification : MFG AND SUPPLY OF ROUGH MACHINED BODY TO DRG NO 118 BODY 3400 AS PER SCOPE OF WORK MA 11 110 8 24 DT 15 06 2017
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ROUGH MACHINED DRIVING GEAR FORGINGS TO DRG NO 118-DRIVE GEAR-3399 AS PER SCOPE OF WORK/MA-11/1108/23 DATED: 13-06-2017[80]()
Specification : Manufacture & Supply Of Rough Machined Driving Gear Forgings to Drg. No. 118-Drive Gear – 3399 as per Scope of Work/MA-11/1108/23 Dtd: 13-06-2017
1) Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirement on WJ[00]()
Specification : Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirem
1) PACKING FITMENT STEEL FOR BOX M 167 LF 9911357452
Description : PACKING FITMENT STEEL FOR BOX M 167 LF 9911357452()
Specification : PACKING FITMENT STEEL FOR BOX M-167
R
Estab
Category : p
Grade : 3
Size :
S
2540
SAMCO METALLOYS INDIA
PLOT NO 150
LANE NO 9
SAI PURAM INDUSTRIAL AREA DELHI ROAD MEERUT Uttar Pradesh
PIN1 : 250001
Phone No. : 9997012340 GSTIN :
09DMBPA5629B1ZH
