1) Conversion of Fuze Holder To OFAJ Drg No FS3025 into FUZE Holder Assembly To OFAJ Drg No FS 3027 By Vulcanization[00]()
Specification : Conversion of Fuze Holder To OFAJ Drg. No. FS-3025 into FUZE Holder Assembly To OFAJ Drg. No. FS-3027 By Vulcanization.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONVERSION OF STEEL CUP TO DRG NO ARDE 2120 DET NO 11 SHEET NO 3 INTO STEEL CUP WITH SEAL TO DRG ARDE 2120 DET NO 10 WITH TEST CERTIFICATE OF OZONE CHAMBER FOR SHELF LIFE OF 08 YEARS[00]()
Specification : CONVERSION OF STEEL CUP TO DRG NO ARDE 2120 DET NO 11 SHEET NO 3 INTO STEEL CUP WITH SEAL TO DRG ARDE 2120 DET NO 10 WITH TEST CERTIFICATE OF OZONE CHAMBER FOR SHELF LIFE OF 08 YEARS
Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*
R
Nonestab
2) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
3) HAMMER FOR LMG IN FINISHED CONDITION[70]()
Specification : HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL ENCLOSED PART NO 1156282[90]()
Specification : LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL(ENCLOSED) PART NO 1156282.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
2) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]()
Specification : As per Drawing
E
Nonestab
3) LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
4) CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12 7 MM AD GUN A 2212[70]()
Specification : AS PER DRG OF "CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12.7 MM AD GUN (A 2212)
"
R
Nonestab
5) 20mm Bolt Assembly to Drg No 44P03000 required for AMR[70]()
Specification : 20mm Bolt Assembly to Drg. No. 44P 03000* required for AMR (LF. No. 2028423000),
E
Nonestab
6) 14 5 mm Bolt Assembly[70]()
Specification : 14.5 mm Bolt Assembly as per drawing 44P 14000
E
Nonestab
7) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
8) CYLINDER PRE MACHINING[70]()
Specification : CYLINDER PRE-MACHINING 90%
C
Nonestab
9) CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637[70]()
Specification : CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637
C
Nonestab
10) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
E
Nonestab
11) AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL[70]()
Specification : AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL
E
Nonestab
12) BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL[70]()
Specification : BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL
E
Estab
13) BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3[70]()
Specification : AS PER DRAWING BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3
R
Nonestab
14) 62C 7101 250 M3 BODY TRIGGER MECH 2 2 CASTING DRG NO 6P 11 7 1[70]()
Specification : AS PER DRAWING 62C 7101 250 M3 BODY TRIGGER MECH 2-2 CASTING DRG NO 6P 11 7 1
R
Nonestab
15) 62C 7102 250 I3 SIGHT BED BODY TRIGGER MECH CASTING DRG NO 6P 11 7 2[70]()
Specification : AS PER DRG 62C 7102 250 I3 SIGHT BED BODY TRIGGER MECH CASTING DRG NO 6P 11 7 2
R
Nonestab
16) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Engine Factory Avadi
Name
Specification
Use
Status
1) Regulator Cover Casting
315-620-7()
Specification : 315-620-7
C
Estab
2) ELBOW CYLINDER HEAD LH MACHINING - Drg.No.406-35-18()
Specification : 406-35-18
C
Estab
3) Regulator Body Casting
Drg. no. 315-619-19()
Specification : 315-619-19
C
Estab
4) Oil Pump Body
Drg.No. 20-12-124-8()
Specification : 20-12-124-8
C
Estab
5) Outlet RH
Drg.No.406-30-11A()
Specification : 406-30-11A
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DIAPHRAGM (ADAPTER) FOR RGB -60[33]()
Specification : AS PER DRAWINGS
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Mounting 81MM Mortar E 1 General Assembly to Part No AMG 72895 DS CAT No 1015 001480 Drgs Specifications of Sub Assemblies Components as per Annexure No 81MM MOR ODC Annexure 002 for assembly of 81MM Mortar Ordnance[63]()
Specification : Mounting, 81MM Mortar E-1 (General Assembly) to Part No. AMG 72895 (DS CAT No. 1015-001480), Drgs, Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/Annexure/002 for assembly of 81MM Mortar Ordnance
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF 250 KG STEEL BOTTLE CASTING 6241101206[62]()
Specification : AS PER OFM SPECIFICATION
E
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm assembly()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
2) Loading Tray Assembly[62]()
Specification : All the tender related documents (Terms & Conditions and Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
3) BARREL BRUSH[65]()
Specification : BARREL BRUSH TO PART NO.176-4327FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
P
Nonestab
4) CUSHION[65]()
Specification : CUSHION TO DRG NO.166-411FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
5) EXTRACTOR[65]()
Specification : EXTRACTOR TO PART NO.161-1624 FOR SMT/STE COMPONENTS OFSHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
6) EXTRACTOR BOX[65]()
Specification : EXTRACTOR BOX TO DRG NO. 161-1664FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
7) OBTURATOR SEAT EXTRACTION TOOL[65]()
Specification : OBTURATOR SEAT EXTRACTION TOOL TO DRG.NO.166-968 FOR SMT/STECOMPONENTS OF SHARANG ORDNANCE.,
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
10) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
11) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
12) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
13) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
14) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
15) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
2) Loading Tray Assembly[62]()
Specification : All the tender related documents (Terms & Conditions and Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
3) BARREL BRUSH[65]()
Specification : BARREL BRUSH TO PART NO.176-4327FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
R
Nonestab
4) CUSHION[65]()
Specification : CUSHION TO DRG NO.166-411FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
5) EXTRACTOR[65]()
Specification : EXTRACTOR TO PART NO.161-1624 FOR SMT/STE COMPONENTS OFSHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
6) EXTRACTOR BOX[65]()
Specification : EXTRACTOR BOX TO DRG NO. 161-1664FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
7) OBTURATOR SEAT EXTRACTION TOOL[65]()
Specification : OBTURATOR SEAT EXTRACTION TOOL TO DRG.NO.166-968 FOR SMT/STECOMPONENTS OF SHARANG ORDNANCE.,
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
10) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
11) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
12) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
13) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
14) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
15) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
16) CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance[63]()
Specification : CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance
C
Nonestab
17) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
18) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
19) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
2) Loading Tray Assembly[62]()
Specification : All the tender related documents (Terms & Conditions and Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
3) BARREL BRUSH[65]()
Specification : BARREL BRUSH TO PART NO.176-4327FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
P
Nonestab
4) CUSHION[65]()
Specification : CUSHION TO DRG NO.166-411FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
5) EXTRACTOR[65]()
Specification : EXTRACTOR TO PART NO.161-1624 FOR SMT/STE COMPONENTS OFSHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
6) EXTRACTOR BOX[65]()
Specification : EXTRACTOR BOX TO DRG NO. 161-1664FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009
C
Nonestab
7) OBTURATOR SEAT EXTRACTION TOOL[65]()
Specification : OBTURATOR SEAT EXTRACTION TOOL TO DRG.NO.166-968 FOR SMT/STECOMPONENTS OF SHARANG ORDNANCE.,
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
10) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
11) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
12) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
13) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
14) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
15) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
16) CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance[63]()
Specification : CRANK TO PART NO 161 690 excluding nitriding operation to be manufactured from forging as per part no 161 690 F specification no 740 for Sharang Ordnance
C
Nonestab
17) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
18) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
19) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
20) CASE TO DRG NO D 3053014 REV A FOR DHANUSH ORDNANCE[63]()
Specification : CASE TO DRG NO D 3053014 REV A FOR DHANUSH ORDNANCE
1) Link for AO 18 AK 630 Drg no 3 AO 18 001 AS PER TECH SPECN NO 3 AO 18 001 TY NASK 835 PROV[72]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()
Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]()
Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COLLECTOR MANIFOLD ASSY AK 630 SB 108 SB[72]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol[70]()
Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Magazine to Part No IQX 12 for Fuze 162 Mk 8 Mk 9[63]()
Specification : AS PER DRAWING
C
Nonestab
2) STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010[63]()
Specification : AS PER DRAWING
C
Nonestab
3) TUBE BLANK TO DRG NO OTF S 006 FOR 125 mm HEAT SHELL[63]()
Specification : TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL
R
Nonestab
4) SHUTTER IN F COND TO DRG NO IQX 7[63]()
Specification : SHUTTER TO DRG NO IAFD 38 OR IQX 7 IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
2) 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A[91]()
Specification : MACHINING OF BOMB 81MM FRONT PART TO DRG NO M 10307A
C
Nonestab
2) SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203[91]()
Specification : SEMI MACHINING OF 81 MM MORTAR BOMB FROM REAR PART FORGING GSF DRAWING NO M 10177A TO GSF DRAWING NO M 11611 INPUT MATERIAL ITEM CODE 6227100203
R
Nonestab
Category :
Grade : Grade III
Size :
S
2627
MOTHERSON SUMI SYSTEMS LIMITED
SURVEY No. 348/1A/18, 348/2-5, 355/3 KANCHEEPURAM CHENNAI TAMILNADU
PIN1 : 603202
Phone No. : 9840386212
1) MFG AND SUPPLY OF ROUGH MACHINED BODY TO DRG NO 118 BODY 3400 AS PER SCOPE OF WORK MA 11 110 8 24 DT 15 06 2017[80]()
Specification : MFG AND SUPPLY OF ROUGH MACHINED BODY TO DRG NO 118 BODY 3400 AS PER SCOPE OF WORK MA 11 110 8 24 DT 15 06 2017
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ROUGH MACHINED DRIVING GEAR FORGINGS TO DRG NO 118-DRIVE GEAR-3399 AS PER SCOPE OF WORK/MA-11/1108/23 DATED: 13-06-2017[80]()
Specification : Manufacture & Supply Of Rough Machined Driving Gear Forgings to Drg. No. 118-Drive Gear – 3399 as per Scope of Work/MA-11/1108/23 Dtd: 13-06-2017
E
Nonestab
Category : dp
Grade : Grade II
Size :
S
2630
Electronica Automations Pvt.Ltd.
J 57 Block S MIDC Bhosari Near Indrayani Chowk MIDC Bhosari Pune Maharashtra
PIN1 : 411026
Phone No. : 27125599 GSTIN : 27AACCE5914G1ZR
1) Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirement on WJ[00]()
Specification : Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirem
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
2631
SAMCO METALLOYS INDIA
PLOT NO 150
LANE NO 9
SAI PURAM INDUSTRIAL AREA DELHI ROAD MEERUT Uttar Pradesh
PIN1 : 250001
Phone No. : 9997012340 GSTIN : 09DMBPA5629B1ZH
1) WADDING POLYESTER HOLLOW SILCONIZED 350 GSM IN 91 CM[21]()
Specification : AS PER APPENDIX "A" ATTACHED TO PROV. SPECN. S/6252/A/TC-6
R
Nonestab
Category : p
Grade : Grade I
Size :
L
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) THERMAL BONDED BATTING POLYESTER 100 GSM 150 CM WIDTH[21]()
Specification : AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11
R
Nonestab
Category : p
Grade : Grade II
Size :
L
2636
Parmjeet Sandhu Engg. Works
B-88/5, Mayapuri, Indl. Area, Phase-1, New Delhi-110064 Mayapuri New Delhi Delhi
PIN1 : 110064
Phone No. : 41833510 GSTIN : 07AAHPS8719F1ZC
1) Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirement on WJ[00]()
Specification : Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirem
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
2638
APEE ENGINEERS
JALAN INDUSTRIAL COMPLEX
Jangalpur,
P.O. Domjur, Dist. Howrah-711411 West Bengal
GateNo. 1, Gali No.1, Bipranna, HOWRAH West Bengal
PIN1 : 711411
Phone No. : 24238478
1) PRE-MACHINED BARREL BLANK FOR PISTOL AUTO 9MM 1A [70]()
Specification : PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OF
C
Nonestab
2) SPRING PLATFORM FOR 5.56 INSAS RIFLE[70]()
Specification : SPRING PLATFORM TO DS CAT NO.5360-007117 ( DC-26521-SA ) F0R RIFLE 5.56MM INSAS.
C
Nonestab
3) BODY (FINISH) FOR PISTOL AUTO 9MM 1A [70]()
Specification : BODY TO DS CAT NO 1005-003145 (DC-26821-SA). MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1 OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE SHT.NO.1 FOR PISTOL 9MM 1A.
5) MAGAZINE TUBE WITH PLUG FOR 12 BORE PUMP ACTION GUN [70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
C
Nonestab
6) EXTRACTOR FOR PISTOL AUTO 9MM 1A.[70]()
Specification : EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.
8) BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V) OF RIFLE 5.56MM.INSAS.[70]()
Specification : BLANK FOR BARREL EXTENSION(UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*6-S. FOR RIFLE 5.56MM.INSAS. (MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE)
C
Nonestab
9) HAMMER MK-2 FOR PISTOL AUTO 9MM 1A.[70]()
Specification : HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1
11) PISTON EXTENSION (UPTO STAGE-VII) FOR RIFLE 5.56MM INSAS.[70]()
Specification : PISTON EXTENSION UPTO STAGE VII AS PER RFI SK NO.6943*3-S WITH FIRM'S MATERIAL. FOR RIFLE 5.56 MM INSAS.
C
Nonestab
12) TUBE LOWER FOR RIFLE 5.56MM INSAS FOLDABLE BUTT (STEEL)[70]()
Specification : TUBE LOWER TO DRG.NO.ARDE SK 2975/11. FOR RIFLE 5.56MM INSAS FOLDABLE BUTT(STEEL).[AL.ALLOY TO IS:738-243451'W'(HT15-OLD DESIG)WITH PROTECTIVE FINISH ANODISED TO COLOUR BLACK].
C
Nonestab
13) FLASH ELIMINATOR FOR RIFLE 5.56MM LMG (TO BE USED IN RIFLE 5.56MM EXCALIBUR)[70]()
Specification : FLASH ELIMINATOR FOR 5.56MM LMG TO DS CAT NO.1005-007962 (ARDE SK NO 2689/224) (TO BE USED IN RIFLE 5.56 MM EXCALIBUR)
19) SEMI FINISH BLANK OF HAMMER FOR RIFLE 5.56MM INSAS.[70]()
Specification : MATERIAL BS 970 PT I:1983-655 M-13 En-36B
C
Nonestab
20) SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS. [79]()
Specification : SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS.AS PER RFI SK.NO.6448*2 (EXCEPT HEAT TREATMENT AND PHOSPHATING).
C
Nonestab
21) BLANK FOR SEAR SAFETY FOR RIFLE 5.56MM INSAS.[79]()
Specification : BLANK FOR SEAR SAFETY AS PER RFI SK. NO. 5076*10FOR RIFLE 5.56MM INSAS.(WITH FIRMS MATL.)
C
Nonestab
22) REGULATOR GAS FOR RIFLE 5.56MM INSAS [70]()
Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).
