List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2661 Auto Wires
B-2/24, DSIIDC Flatted Factory Complex, Jhilmil Indl. Area Delhi Delhi
PIN1 : 110095
Phone No. : 22131273
GSTIN : 07AAAFA6004G1Z2 		AAAFA6004G

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) VEHICLE REAR VIEW CAMERA SYSTEM[90]() Specification : SPECIFICATION NO. VFJ/ODC/SP/RVC/MPV/02, DATED 09/12/2019 C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) EARTH CABLE FUEL TANK[90]() Specification : EARTH CABLE FUEL TANK- C/A OF HORN PART NO. F-0656700-VI C Estab
2) Heavy Duty Cables[90]() Specification : HEAVY DUTY CABLES DRG. NO. OFPM 640-06-2050-1/E C Estab
3) SET OF 15 HARNESSES FOR MPV[90]() Specification : SET OF 15 HARNESSESS FOR MINE PROTECTED VEHICLE (ARMY VERSION) (AS PER ENCLOSURE) C Estab
4) POWER OPERATED REAR VIEW MIRROR SET FOR MPV[90]() Specification : POWER OPERATED REAR VIEW MIRROR SET CONSISTING OF ONE LHS MIRROR AND ONE RHS MIRROR ALONGWITH ITS ACCESSORIES USED ON HEAVY DUTY FOUR WHEELERS AS PER SPECIFICATION NO. OFPM/R&D/SP/ARMY/REAR VIEW MIRROR C Nonestab
5) SAFETY BELT (FOR MPV)[90]() Specification : SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G C Nonestab
6) POLYPROPELENE MOULDED ARM SLING FOR MPV[90]() Specification : POLYPROELENE MOULDED ARM SLING FOR ROOF HANDLE REVOLVING TYPE-COLOUR- YELLOW C Estab
7) FUSE BOX[90]() Specification : FUSE BOX 12 WAY, NAKE-KKK, PART NO K-770, WITH FUSE 24V, 20A, MAKE-KKK, PT. NO. K-777 C Nonestab
8) AUTO CABLE BLUE BLACK[90]() Specification : AUTO CABLE BLUE/BLACK 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605, 1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.) C Nonestab
9) AUTO CABLE BLUE RED[90]() Specification : AUTO CABLE BLUE/RED 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605, 1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.) C Nonestab
10) AUTO CABLE ORANGE YELLOW[90]() Specification : AUTO CABLE ORANGE/YELLOW 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994 OR DIN72551 JASCO: FINOLEX/V GUARD MAKE ONLY C Nonestab
11) AUTO CABLE ORANGE WHITE[90]() Specification : AUTO CABLE ORANGE/WHITE 1.0 SQ. MM.AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:006505,1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.) C Nonestab
12) AUTO CABLE GREEN BLACK[90]() Specification : AUTO CABLE GREEN/BLACK 1.0 SQ. MM. FINOLEX AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.) C Nonestab
13) AUTO CABLE 1 SQ MM WHITE[90]() Specification : AUTO CABLE 1.0 SQ. MM. WHITE AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.) C Nonestab
14) AUTO CABLE 1 SQMM BROWN BLACK[90]() Specification : AUTO CABLE 1.00 SQ. MM. BROWN/BLACK AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY. C Nonestab
15) AUTO CABLE 1 SQ MM RED[90]() Specification : AUTO CABLE 1.00 SQ. MM. RED AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY. C Nonestab
16) AUTO CABLE TWO AND HALF SQ MM BROWN[90]() Specification : AUTO CABLE 2.5 SQ. MM. BROWN AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY. C Nonestab
17) AUTO CABLE 1 SQ MM BROWN[90]() Specification : AUTO CABLE 1.00 SQ. MM. BROWN AUTO CABLE CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY. C Nonestab
18) AUTO CABLE 1 SQ MM ORANGE GREEN[90]() Specification : AUTO CABLE 1.00 SQ. MM. ORANGE/GREEN AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1974 OR DIN72551 MAT- FINOLEX/V GUARD MAKE ONLY. C Nonestab
19) AUTO CABLE 1 SQ MM GREEN RED[90]() Specification : AUTO CABLE 1.00 SQ. MM. GREEN/RED AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.) C Nonestab
20) AUTO CABLE 1 SQ MM YELLOW RED[90]() Specification : AUTO CABLE 1.00 SQ. MM. YELLOW/RED AUTO CABLES CONFIRMING TO IS:13313-1991, IS:2465-1994, JASCO:00605,1994 OR DIN72551 (MAT- FINOLEX/V GUARD MAKE ONLY.) C Nonestab
21) 5 PIN SOCKET SWITCH COMBINED[90]() Specification : 5 PIN SOCKET/SWITCH COMBINED, 220-240 VOLTS, 6 AMPERE, MODEL:- ANCHOR (PENTA) CONFIRMING TO IS : 3854 C Nonestab
22) EYELET LF NO 9013198407000[90]() Specification : EYELET 8.5 MM ID, FOR 1.0 SQ. MM CABLE C Nonestab
23) EYELET LF NO 9013198408000[90]() Specification : EYELET 10.5 MM ID, FOR 1.0 SQ MM CABLE C Nonestab
24) PVC ELECTRICAL INSULATION[90]() Specification : PVC ELECTRICAL INSULATION SLEEVE (6.00 MM I.D, 0.25, 0.4 MM) C Nonestab
25) TOGGLE SWITCH SINGLE POLE[90]() Specification : TOGGLE SWITCH SINGLE POLE DOUBLE THROW, 250 V, 10 AMP, MAKE- UNIQUE/GE C Nonestab
26) FEMALE LUCAR[90]() Specification : FEMALE LUCAR (18V FEMALE LUCAR, SUITABLE FOR 4.00 - 6.00 MM SQ. AUTO CABLE) C Nonestab
27) MALE LUCAR[90]() Specification : 6.3 MALE LUCAR (SUITABLE FOR 0.5 TO 2.5 SQ.MM AUTO CABLES) C Nonestab
28) FEMALE LUCAR SELF LOCK TYPE[90]() Specification : 6.3 FEMALE LUCAR SELF LOCK TYPE 6.3 FEMALE LUCAR (SUITABLE FOR 0.5 TO 2.5 SQ.MM AUTO CABLES) C Nonestab
29) WIRE COUPLER[90]() Specification : WIRE COUPLER (FEMALE CONNECTOR) WITH INSULATING CAP 03MM ID, CYLINDRICAL C Nonestab
30) EYELETS 4 MM ID[90]() Specification : EYELETS 4 MM ID FOR 1 TO 2.5 MM AUTO CABLE C Nonestab
31) EYELETS 5 MM ID[90]() Specification : EYELETS 5 MM ID FOR 1 TO 2.5 MM AUTO CABLE C Nonestab
32) EYELETS 7 MM ID[90]() Specification : EYELETS 7 MM ID FOR 1 TO 2.5 MM AUTO CABLE C Nonestab
33) EYELETS 6 MM ID[90]() Specification : EYELETS 6 MM ID FOR 1 TO 2.5 MM AUTO CABLE C Nonestab
34) RELAY CABLE FLANGE HEATER[90]() Specification : RELAY CABLE FLANGE HEATER.PART NO.F8155800-B. C Nonestab
35) TOGGLE SWITCH SINGLE POLE SINGLE THROW[90]() Specification : TOGGLE SWITCH SINGLE POLE SINGLE THROW 25V/10AMP C Nonestab
36) COMBINATION SWITCH[90]() Specification : COMBINATION SWITCH PT. NO. LCS 32100THD, LAMP-HI-LOW BEAM TURN SIGNAL & HORN (LISPART) WITH AID PIN SOCKET FEMALE LUCAR C Nonestab
37) 6 WAY MALE AND FEMALE SOCKET[90]() Specification : 6 WAY MALE & FEMALE SOCKET FOR 6.3 LUCARS FIT FOR 6.3 MALE & FEMALE LUCARS C Nonestab
38) FUSES 24V 20AMP[90]() Specification : FUSES 24V/20AMP C Nonestab
39) 1 WAY MALE AND FEMALE SOCKET[90]() Specification : 1 WAY MALE & FEMALE SOCKET FOR LUCARS FIT FOR 6.3 MALE & FEMALE LUCARS C Nonestab
40) 2 WAY MALE AND FEMALE SOCKET[90]() Specification : 2 WAY MALE & FEMALE SOCKET FOR LUCARS FIT FOR 6.3 MALE & FEMALE LUCARS C Nonestab
41) 3 WAY MALE AND FEMALE SOCKET[90]() Specification : 3 WAY MALE & FEMALE SOCKET FOR 6.3 LUCARS FIT FOR 6.3 MALE & FEMALE LUCARS C Nonestab
42) 4 WAY MALE AND FEMALE SOCKET[90]() Specification : 4 WAY MALE & FEMALE SOCKET FOR 6.3 LUCARS FIT FOR 6.3 MALE & FEMALE LUCARS C Nonestab
43) 8 WAY MALE AND FEMALE SOCKET[90]() Specification : 8 WAY MALE & FEMALE SOCKET FOR 6.3 LUCARS FIT FOR 6.3 MALE & FEMALE LUCARS C Nonestab
44) 1 WAY MALE AND FEMALE SOCKET 18 A AND B[90]() Specification : 1 WAY MALE & FEMAL SOCKET FOR 18 A&B LUCARS FIT FOR 18 A&B MALE & FEMALE LUCARS C Nonestab
45) 2 WAY MALE AND FEMALE SOCKET 18 A AND B[90]() Specification : 2 WAY MALE & FEMALE SOCKET FOR 18 A & B LUCARS FIT FOR 18 A& B MALE & FEMALE LUCARS C Nonestab
46) FLEXIBLE READING LAMP[90]() Specification : FLEXIBLE READING LAMP 24V WITH 2 TO 5 WATT BULB MODEL-AMBASSADOR PT NO-4120900002 MAKE- CARDEC/BOSS C Nonestab
47) GENERAL AND ELECTRICAL 08 ITEMS FOR MPV[90]() Specification : GENERAL AND ELECTRICAL 08 ITEMS FOR MPV, BS-3 (LIST OF ITEMS ALONG WITH PART NO., ITEMS NAME AND QTY/VEH IS ENCLOSED) C Estab
48) STRIP ELECTRIC LOOM[90]() Specification : STRIP ELECTRIC LOOM DRG. NO. 640-06-2022-1/A C Nonestab
49) SELF ADHESIVE PVC INSULATION TAPE BLACK[90]() Specification : SELF ADHESIVE PVC INSULATION TAPE BLACK 1.9 CM X 10 MTR. X 0.125 MM ROLL OF 10 METER EACH C Nonestab
50) 6 3 FEMALE LUCAR[90]() Specification : 6.3 FEMALE LUCAR (SUITABLE FOR 0.5 TO 2.5 SQ.MM AUTO CABLES) C Nonestab
51) 6 3 MALE LUCAR[90]() Specification : 6.3 MALE LUCAR (SUITABLE FOR 0.5 TO 2.5 SQ.MM AUTO CABLES) C Nonestab
52) FUSE BOX PIN TYPE 6 WAY[90]() Specification : FUSE BOX PIN TYPE WITH GLASS FUSE 24V, 20A, 6WAY MAKE-KKK C Nonestab
Category : p
Grade : Grade II
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) POWER OPERATED REAR VIEW MIRROR SET FOR MPV[90]() Specification : POWER OPERATED REAR VIEW MIRROR SET CONSISTING OF ONE LHS MIRROR AND ONE RHS MIRROR ALONGWITH ITS ACCESSORIES USED ON HEAVY DUTY FOUR WHEELERS AS PER SPECIFICATION NO. OFPM/R&D/SP/ARMY/REAR VIEW MIRROR C Nonestab
2) SAFETY BELT (FOR MPV)[90]() Specification : SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G C Nonestab
Category : p
Grade : Grade II
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) LPTA CONVOY LAMP ALONGWITH LAMP[90]() Specification : CONVOY LAMP ALONGWITH LAMP 24V, 2 WATS,LPTA715 BS-III. C Nonestab
2) LPTA BLACK OUT LAMP REAR 4 PER VEH[90]() Specification : BLACK OUT LAMP REAR, TML PT NO.215454409905/257454409912, FITTED WITH 24V, 2 WATT BULB TML PT.NO.62120510067/216054000105. C Nonestab
3) LPTA BATTERY CUT OUT SWITCH[90]() Specification : BATTERY CUT OUT SWITCH TML, PT.NO.257354509931. e C Estab
4) LPTA BLACKOUT LAMP FRONT 2 PER VEH[90]() Specification : BLACKOUT LAMP FRONT, TML PT.NO.0005440814/215454409902/257454409915, FITTED WITH 24V, 21WATT BLUB,TML PT.NO.62120520046 C Nonestab
5) LPTA ASSY CAB LAMP BULB 24VBS III[90]() Specification : ASSY CAB LAMP (WITH BULB-24V) BS-III VEHICLE PART NO. C Estab
6) LPTA STARTER PUSH BUTTON[90]() Specification : STARTER PUSH BUTTON 2101 5450 9906 C Estab
7) LPTA ASSY CABLE SET WITH 12POLE SKT[90]() Specification : ASSY CABLE SET WITH 12 POLE SOCKET BS-III VEHICLE (LPTA) PART NO.261454820103a. C Estab
8) LPTA ASSY TAIL LAMP RH and LH 24VBS 3[90]() Specification : ASSY TAIL LAMP RH & LH 24V (05 CHAMBER) ALONGWITH LAMP. LPTA715 BS-III.PART NO. 280954441602 & 280954441603 REF.DRG. 2641 5440 0447) C Nonestab
Category : p
Grade : Grade II
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) BEEPER REVERSING BUZZER 24 V[90]() Specification : BEEPER/REVERSING BUZZER 24 V. BEEPER/REVERSING BUZZER 24 V PART NO. F 7858700-A. C Estab
2) ENGINE WIRING HARNESS[90]() Specification : ENGINE WIRING HARNESS ENGINE WIRING HARNESS PT NO. FFB07000-HASE. N/A C Nonestab
3) FRAME WIRING HARNESS[90]() Specification : FRAME WIRING HARNESS FRAME WIRING HARNESS PT.NO.FAG14700-HASE.1. N/A C Nonestab
4) DISTANCE PIECE FOR L LOGO[90]() Specification : DISTANCE PIECE FOR "L" LOGO DISTANCE PIECE FOR " L " LOGO. DRG./PART NO.F7617260-HASE. C Nonestab
5) Knob Shift Lever[90]() Specification : As per specification / drg. C Estab
6) Nylon Strap 100 mm[90]() Specification : As per specification / drg. C Estab
7) Nylon Strap 150mm[90]() Specification : As per specification / drg. C Estab
8) Nylon Strap 220 mm[90]() Specification : As per specification / drg. C Estab
9) R S Buffer[90]() Specification : As per specification / drg. C Nonestab
10) C A Harness 12 Pin Socket[90]() Specification : C/A HARNESS 12 PIN SOCKET C/A HARNESS 12 PIN SOCKET PT.NO.B8805601 HASE C Estab
Category : p
Grade : Grade II
Size : S
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) GAITTER RUBBER Description : GAITTER RUBBER() Specification : GAITTER RUBBER,PART NO. F 1135650-V1 C Estab
2) CHANGE OVER/ROTARY SWITCH() Specification : CHANGE OVER/ROTARY SWITCH pt. No.. F2231800 C Estab
3) Knob Shift Lever Description : Knob Shift Lever() Specification : As per specification / drg. Pt No. X-4801460(A) C Estab
Category : p
Grade : 3
Size : S
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) GAITTER RUBBER Description : GAITTER RUBBER() Specification : GAITTER RUBBER,PART NO. F 1135650-V1 C Estab
2) CHANGE OVER/ROTARY SWITCH() Specification : CHANGE OVER/ROTARY SWITCH pt. No.. F2231800 C Estab
3) Knob Shift Lever Description : Knob Shift Lever() Specification : As per specification / drg. Pt No. X-4801460(A) C Estab
Category : p
Grade : 3
Size : S
2662 SRI SATGURU TRADERS
HIG-242, RATAN LAL NAGAR RATAN LALA NAGAR KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 0512228114
GSTIN : 09ALMPB4369G1ZX 		ALMPB4369G

Download 		1Ordnance Equipment Factory

Name Specification Use Status
1) FOUR WAY MILD STEEL JOINT[21]() Specification : AS PER REQUIREMENT & SPECIFICATION C Estab
2) THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION C Estab
3) THREE WAY ROOF POLE MILE STEEL JOINT[21]() Specification : AS PER TENDER C Estab
Category :
Grade : Grade III
Size : SS
1Ordnance Equipment Factory

Name Specification Use Status
1) PIN TENT ANGLE IRON MED. MK-2[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Estab
Category :
Grade : Grade III
Size : SS
1Ordnance Equipment Factory

Name Specification Use Status
1) PIN TENT CARBON STEEL SMALL 8340-000508[21]() Specification : IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED R Estab
Category :
Grade : Grade III
Size : SS
1Ordnance Equipment Factory

Name Specification Use Status
1) Tent Pin Angle Large Size 50 x 50 x 6 Complete For Tent Arctic Large[21]() Specification : Specn No.- Letter No. G/2516/3/Issue/G-3 dt. 09.02.2001 IND/GS/1629 R Estab
Category :
Grade : Grade III
Size : SS
1Ordnance Equipment Factory

Name Specification Use Status
1) CLIP IRON (FOR TENT EXTENDABLE)[21]() Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED R Nonestab
Category : p
Grade : Grade III
Size : SS
1Ordnance Equipment Factory

Name Specification Use Status
1) CLIP IRON (FOR TENT EXTENDABLE)[21]() Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED R Nonestab
2) TENT RING IG 12.5 MM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
3) U PIN[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
4) Rivet M.S. Snap Head 6 mm dia x 65 mm long[21]() Specification : IS:2155 (Latest) R Nonestab
5) BUCKLE ALU. ALLOY OR ATTACHMENTS QR OR RINGS VARIOUS[21]() Specification : APRQ R Estab
6) HEXAGONAL BOLT WITH LOOP FITTED WITH WING NUT WITH BRACKET[21]() Specification : CQA(GS)/US/467 (d) (5986/PK) R Nonestab
7) BUCKLE ALU. ALLOY 51MM BLACK ANODIZED[21]() Specification : AS PER DRG NO SK -857 ( CQA(GS)/US/324 & ATTCHED RELEVANT R Nonestab
8) TENT DEES IRON 25MM X 20MM X 4MM[21]() Specification : IND/GS/1416 R Nonestab
9) BOLTS & NUTS STEEL VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
10) TWISTED PINS[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
11) HAMMER SLADGE DOUBLE FACED 2 KG. WITH HANDLE[21]() Specification : IS:841-1983 & SUPPL. SCH. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE. R Nonestab
12) EYELET BRASS NO.21 WITH PLAIN WASHER BRONZED BLACK[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
13) EYELET BRASS NO.28 WITH TURN OVER WASHERBRONZED BLACK[21]() Specification : IS:4084-1978,REAFFIRMED 2013,AMDS 2. R Nonestab
Category : p
Grade : Grade III
Size : SS
1Ordnance Equipment Factory

Name Specification Use Status
1) CLIP IRON (FOR TENT EXTENDABLE)[21]() Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED R Nonestab
2) TENT RING IG 12.5 MM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
3) U PIN[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
4) Rivet M.S. Snap Head 6 mm dia x 65 mm long[21]() Specification : IS:2155 (Latest) R Nonestab
5) BUCKLE ALU. ALLOY OR ATTACHMENTS QR OR RINGS VARIOUS[21]() Specification : APRQ R Nonestab
6) HEXAGONAL BOLT WITH LOOP FITTED WITH WING NUT WITH BRACKET[21]() Specification : CQA(GS)/US/467 (d) (5986/PK) R Nonestab
7) BUCKLE ALU. ALLOY 51MM BLACK ANODIZED[21]() Specification : AS PER DRG NO SK -857 ( CQA(GS)/US/324 & ATTCHED RELEVANT R Nonestab
8) TENT DEES IRON 25MM X 20MM X 4MM[21]() Specification : IND/GS/1416 R Nonestab
9) BOLTS & NUTS STEEL VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
10) TWISTED PINS[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Nonestab
11) HAMMER SLADGE DOUBLE FACED 2 KG. WITH HANDLE[21]() Specification : IS:841-1983 & SUPPL. SCH. CQA(GS)/SS/337(b) (5625/PK) AND AS IN TE. R Nonestab
12) EYELET BRASS NO.21 WITH PLAIN WASHER BRONZED BLACK[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
13) EYELET BRASS NO.28 WITH TURN OVER WASHERBRONZED BLACK[21]() Specification : IS:4084-1978,REAFFIRMED 2013,AMDS 2. R Nonestab
14) THREE WAY JOINT FOR ROOF POLE CADMIUM PLATED FOR A/F[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
15) THREE WAY JOINT WITH BASE PLATE CADMIUM PLATED FOR A/F[21]() Specification : DRG. NO. 7912/PK SHEET NO. 2 R Nonestab
16) FOUR WAY JOINT CADMIUM PLATED FOR A/F[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
17) TRIANGULAR D RING NICKLE PLATED[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
18) PIN TENT ANGLE IRON MED.MK-2 - AF[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Nonestab
19) BUCKLE AL SERRATED FOR BELT WAIST[21]() Specification : AS PER REQUIREMENT R Nonestab
20) D Ring 19 mm Nickel Plated x 10.5 mm x 2 mm dia (For Pouches Ammun.)[21]() Specification : As per Drg. No.- SK-860 R Nonestab
21) PIN TENT CARBON STEEL SMALL AF[21]() Specification : AS PER REQUIREMENT R Nonestab
22) PIN TENT CARBON STEEL SMALL 8340-000508[21]() Specification : IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED R Nonestab
Category : p
Grade : Grade III
Size : SS
2663 MSC ENTERPRISE
S4/1, T-BLOCK NEAR POST OFFICE MIDC BHOSARI, PUNE MAHARASHTRA
PIN1 : 411026
Phone No. : 9822570865 		ABFPC8086N

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB Description : DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB() Specification : as per drg C Estab
Category : p
Grade : 1
Size : O
1Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) SET MODULE ASSY E 100 120 BOMB FRAG LF 9911358085() SET OF MODULE ASSEMBLY EMPTY TO DRG NO.0303 00 01 01 03 000 00PC & WITH 10 COMPONENTS FOR PRE-FRAG 100-120 KG BOMB.TO ARDE SPECN.NO.ARDE/SPECN/669 DT DEC 2007.Rev.3 DT.23/11/2015. C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) SET MODULE ASSY E 100 120 BOMB FRAG LF 9911358085 Description : SET MODULE ASSY E 100 120 BOMB FRAG LF 9911358085() Specification : SET OF MODULE ASSEMBLY EMPTY TO DRG NO.0303 00 01 01 03 000 00PC & WITH 10 COMPONENTS FOR PRE-FRAG 100-120 KG BOMB.TO ARDE SPECN.NO.ARDE/SPECN/669 DT DEC 2007.Rev.3 DT.23/11/2015. C Estab
Category : p
Grade : 2
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BODY AND CUP() Specification : 1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO. R Estab
2) LEAD DIOXIDE SPECN:DYNAMIT NOBEL() Specification : DYNAMIT NOBEL 04-749-0012-0004 REVISED JAN 87. R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) BEM ASSEMBLY WITHOUT MOTHERGRAPHITE Description : BEM ASSEMBLY WITHOUT MOTHERGRAPHITE() Specification : AS PER DRG NO.HEM/TEG/03/01-N R Estab
2) GAUGES FOR BEM ASSEMBLY Description : GAUGES FOR BEM ASSEMBLY() Specification : TRG 2/ :X 10 TPI, TPG3/4/: BSF, TRG M156X2P,TRGM160X2P, TPG M160X2P , TPGM156 X2P AS PER DRG NO HEM/ TEG /03/01 R Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Itarsi

[ENR Registration]
Name Specification Use Status
1) BEM ASSEMBLY WITHOUT MOTHERGRAPHITE Description : BEM ASSEMBLY WITHOUT MOTHERGRAPHITE() Specification : AS PER DRG NO.HEM/TEG/03/01-N R Estab
2) GAUGES FOR BEM ASSEMBLY Description : GAUGES FOR BEM ASSEMBLY() Specification : TRG 2/ :X 10 TPI, TPG3/4/: BSF, TRG M156X2P,TRGM160X2P, TPG M160X2P , TPGM156 X2P AS PER DRG NO HEM/ TEG /03/01 R Estab
Category : ddp
Grade : 1
Size : S
2664 RAJESH EXPLOSIVES PRIVATE LIMITED
154 RAJPUR ROAD JAKHAN DEHRADUN Uttarakhand
PIN1 : 248001
Phone No. : 2735249
GSTIN : 05AEOPJ7200B2ZZ 		MRTR03675A

Download 		1Ordnance Factory Chanda

Name Specification Use Status
1) 6432100201 RESIN BASED CCC FOR 120 FSAPDS MKII[64]() Specification : RESIN BASED COMBUSTIBLE CARTG.CASE(CCC)SET (DRG.NO.10060820000000000TA (HEMRL/CCC/2013/FSMKII/SK001 SHT-1) CONSIST OF(1)BODY (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.1 SHT.2) (2)CAP(DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.2 SHT.3) (3)CLOSIN C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) ALUMINIUM POWDER HV GR1 60 BSS JSS 1370 03 1001017225[10]() Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS. R Nonestab
Category : p
Grade : Grade III
Size : S
1High Explosive Factory

Name Specification Use Status
1) CONTAINER 81MM[10]() Specification : CQA(A) 2303(f) DC 36747-A DT 05.03.2001 C Nonestab
Category : p
Grade : Grade III
Size : S
1High Explosive Factory

Name Specification Use Status
1) CONTAINER 120 MM[10]() Specification : CQA(A) 2303(f) DC NO. 36747-A DT 05.03.2001 C Nonestab
Category : p
Grade : Grade III
Size : S
1High Explosive Factory

Name Specification Use Status
1) CONT. ARDE-1935, PT ITV28A W/O DISC CONTAINER[10]() Specification : DRG. NO. ARDE 1935, DET NO 1 PART NO ITV 28A, SHT-1, DC 36747-A TO SPECN CQA(A) 2303 (f) DC 36747-A C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) COMBUSTIBLE CARTIDGE CASE, (M 92)[65]() Specification : DRG./SPEC NO.:OFN/BMCS/M-92/CCC C Nonestab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) IGNITER TUBE M-92[63]() Specification : AS PER ATTACHED FILE C Nonestab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) PROPELLANT RETAINING DEVICE (M 92)[65]() Specification : DRG/SPEC NO.:OFN/BMCS/M-92/PRD C Nonestab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BLACK POWDER DRP 2 L F 1002100025 Description : BLACK POWDER DRP 2 L F 1002100025() Specification : BLACK POWDER DRP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.100CB OF 125MM FSAPDS(AMK-339)AND QAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021. R Nonestab
2) BLACK POWDER GUN POWDER AS PER GOST L F 1002110010 Description : BLACK POWDER GUN POWDER AS PER GOST L F 1002110010() Specification : BLACK POWDER GUN POWDER AS PER GOST 1028.79 GRADE DRP-3 R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BLACK POWDER KZDP 2 L F 1002100024 Description : BLACK POWDER KZDP 2 L F 1002100024() Specification : BLACK POWDER KZDP-2 AS PER SPECIFICATION GOST 1028-79 FOR LIGHTER ASSY.DRG.NO.4Zh63.050CB OF 125MM FSAPDS(AMK-339)ANDQAP No.F3/MANGO PROJECT/21-22 DATE 04/12/2021. R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704 Description : COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704() Specification : COMBUSTIBLE COMPONENTS FOR PRIMARY AND SECONDARY 125MM FSAPDS PRACTICE (HEMRL/CCC/PS/417 AUG.2017) CONSIST OF.1.COMBUSTIBLE BODY PRIMARY -PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/1 .2.COMBUSTIBLE INNER CAP PRIMARY-PRACTICE TO SPEC./DRG.N R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP[64]() Specification : SET OF COMBUSTIBLE CARTG. CASE FSAPDS TO CQA(A) DRG.NO.IRW 5GE CONSISTING OF 1)COMBUSTIBLE BODY FSAPDS TO DRG.NO.IRW 231 2)COMBUSTIBLE CAP FSAPDS IRW 236 3)COMBUSTIBLE CLOSING DISCIRW 237 4)SPACER IRW 238 5)COMBUSTIBLE CAP FSAPDS W/SPACER C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6432100202 RESIN BASED CCC FOR 120MM FSAPDS MK[64]() Specification : SET OF RESIN BASED CCC (COMP-3) FOR 120 MMM FSAPDS MK-I AMMNSPECN.NO.HEMRL/CCC/PS/371,REV-01,JULY 2013 & CONST.OF (I)RESIN BASED COMB.BODY TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.1,(II)CAP TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.2 (III)CLOSINGDIS C Nonestab
2) 6432200201 RESIN BASED CCC FOR 120MM HESH AMMN[64]() Specification : SET OF RESIN BASED CCC (COMP-3) FOR 120 MM HESH AMMN. SPECN.(HEMRL/CCC/PS/372, REV 01, JULY 2013 & DRG.NO. CONST.OF (I)RESIN BASED COMB. BODY DRG.NO.HEMRL/CCC/2005/SK-2007,DET.1(II)CAP DRG.NO.HEMRL/CCC/2005/SK-2007,DET.2 (III)SPACER FORHE C Nonestab
3) 6432200001 SET OF CCC HESH COMP 4 120MM HESH[64]() Specification : SET OF COMBUSTIBLE CARTG.CASE HESH TO DRG.NO.IRW 4GE CONSISTING (1 NO.EACH) (1) COMBUSTIBLE BODY HESH TO DRG.NO.IRW 241(2) COMBUSTIBLE CAP HESH TO DRG.NO.IRW 242 (3)SPACER TO DRG.NO.IRW 243 (4) COMBUSTIBLE CAP HESH SPACER DETL.NO.4 WITHPA C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) COMBUSTIBLE CARTRIDGE CASE (CCC) FOR M-91[65]() Drawing No. OFN/BMCS/M91/CCC C Nonestab
Category : dp
Grade : Grade II
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) PROPELLANT RETAINING DEVICE(PRD) FOR M-91[65]() Drawing No. OFN/BMCS/M91/CCC C Nonestab
Category : dp
Grade : Grade II
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) PROPELLANT RETAINING DEVICE(PRD) FOR M-91[65]() Specification/Drawing No. OFN/BMCS/M-91/PRD C Nonestab
2) BARRIER BAG FOR M-91 AND M-92[64]() Specification/Drawing No. OFN/BMCS/M-91/M-92/BARRIER BAG C Nonestab
Category : dp
Grade : Grade II
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) PROPELLANT RETAINING DEVICE(PRD) FOR M-91[65]() Specification/Drawing No. OFN/BMCS/M-92/PRD C Nonestab
2) DISC SPACER[60]() Specification/Drawing No. OFN/BMCS/M-91/M-92/DISC SPACER C Nonestab
Category : dp
Grade : Grade II
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) FINAL PACKING TUBE, M-91 & M-92[65]() Specification : OFN/BMCS/M91/M92/FINAL PACKING TUBE C Nonestab
2) COMBUSTIBLE CARTRIDGE CASE (CCC) FOR M-91[65]() Specification :OFN/BMCS/M91/CCC,PRD,IT C Nonestab
Category : dp
Grade : Grade II
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) IGNITER TUBE (IT) FOR M-91[63]() DRAWING NO. OFN/BMCS/M91/CCC C Nonestab
Category : dp
Grade : Grade II
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) GUN POWDER FOR 155MM AMMUN.[10]() Specification : GUN POWDER FOR 155MM AMMUNITION AS PER SPECN. IND/ME/974 (PROV) DC NO-3793-ME, DT-28.10.03. R Nonestab
Category : p
Grade : Grade II
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CONTAINER WITH DISC CELL 81 MM[14]() Specification : CQA (A) 2303 C Nonestab
2) CONT.ARDE-1935,PT ITV28A W/O DISC.[6040541033]() Specification : CQA(A) 2303 C Nonestab
3) CONTAINER WITH DISC CIA/2303/DC(I)[60]() Specification : CQA(A) 2303 C Nonestab
Category : p
Grade : Grade II
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) GUN POWDER MEALED JSS-1376-05-1986[10]() Specification : JSS-1376-05-2014 ; REVISION NO 3 R Nonestab
2) GUN POWDER GRANULATED G20 JSS-1376[10]() Specification : JSS 1376-05:2014 DS CAT NO.1376-000 041 REV. NO. 3 R Nonestab
3) GUN POWDER GRANULATED G-40.JSS-1376[10]() Specification : JSS-1376-05 2014 REV.NO.3 R Nonestab
4) GUN POWDER GRANULATED G 12 JSS-1376[10]() Specification : JSS-1376-05:2014 R Nonestab
5) GUN POWDER G-12[10]() Specification : JSS 1376-05 : 1994 REVISION NO. 1, DC 3652-ME R Nonestab
6) GUN POWDER G4[10]() Specification : JSS 1376-05 : 2005 REV. 2 DC- 3935-ME R Nonestab
Category : p
Grade : Grade II
Size : S
2665 ANANTH ENTERPRISES
PLOT NO. 54/3, ROAD NO.12, PHASE -1, IDA JEEDIMETLA HYDERABAD Telangana
PIN1 : 500055
Phone No. : 27755304
GSTIN : 36AEEPG2631R1ZA 		HYDN011110

Download 		1Machine Tool Proto Type Factory

Name Specification Use Status
1) PULLER ASSEMBLY DRG NO VMT SK 119 13000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set[30]() Specification : PULLER ASSY. DRG. NO. VMT-SK-119-13000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED), Qty: 01 Set C Nonestab
2) PNEUMATIC COUPLING ASSEMBLY TO DRG NO VMT SK 119 3000 11 FOR WINDING MACHINE 125 MM SCCC AS PER PART LIST ENCLOSED[30]() Specification : PNEUMATIC COUPLING ASSEMBLY TO DRG NO VMT SK 119 3000 11 FOR WINDING MACHINE 125 MM SCCC AS PER PART LIST ENCLOSED C Nonestab
3) Mandrel Assy Drg No VMT SK 119 10000 11 for Winding Machine 125 mm SCCC as per part list 5 sheets drgs and scope of work enclosed[30]() Specification : Mandrel Assy Drg No VMT SK 119 10000 11 for Winding Machine 125 mm SCCC as per part list 5 sheets drgs and scope of work enclosed C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]() Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Itarsi

Name Specification Use Status
1) CONTAINER OF AKASH SUSTAINER[75]() Specification : AS PER DRG. NO.RPD/AK/CA/00 00 00 00 INCLUDING SUB DRAWING, TOTAL NO. DRAWING SHEET 55 NOS. E Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bhusawal

Name Specification Use Status
1) HANDLE AND HANDLE CLIP ASSEMBLY[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
2) Hinge[99]() Specification : Drg.No. OFB/C/1410-A E Nonestab
3) HANDLE[99]() Specification : AS PER O.F.BSL DRAWING/SPECIFICATION E Nonestab
4) CATCH[99]() Specification : CATCH AS PER DRG NO OFB/C/1561 & CQA PART NO. ISV-585A CORROSPONDING AHSP DRG NO.ISV-585A DC 35750 DATED 14/07/1994. E Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) TUBE , DIMENSION AS PER DESIGNATION 02 OF DRAWING NO 4-026706 021 FOR DUMMY TRAINING CHARGE[00]() Specification : TUBE , DIMENSION AS PER DESIGNATION 02 OF DRAWING NO 4-026706 021 FOR DUMMY TRAINING CHARGE C Estab
Category : ddp
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) Bottom as per Drawing No 4-026706 022 for Dummy Training Charge 125MM[00]() Specification : Bottom as per Drawing No 4-026706 022 for Dummy Training Charge 125MM C Estab
Category : ddp
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) Bracket Module Containing:- A) Bracket RHS to Drg.No.1403-01-01-09RHS-08Nos. B) Bracket LHS to Drg.No.1403-01-01-09LHS-08Nos.[--]() Specification : AS PER DRG C Estab
Category : ddp
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) Supply, Installation, Commissioning and proving (As per Annexure A) of Cargo Roller Mockup Fixture for extraction phase simulation of Heavy Drop AN-32 Platform system as per OFAJ Drg No. BSF-216, including civil work for foundation etc., if any.[00]() Specification : Supply, Installation, Commissioning and proving (As per Annexure A) of Cargo Roller Mockup Fixture for extraction phase simulation of Heavy Drop AN-32 Platform system as per OFAJ Drg No. BSF-216, including civil work for foundation etc., S Estab
Category : ddp
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) Cover as per Drawing No 4-026706 011 for Dummy Training Charge 125MM[00]() Specification : Cover as per Drawing No 4-026706 011 for Dummy Training Charge 125MM C Nonestab
Category : ddp
Grade : Grade III
Size : S
2666 NUTECH INDUSTRIES
NO. G43 G44, 5TH MAIN INDUSTRIAL ESTATE RAJAJI NAGAR BANGALORE Karnataka
PIN1 : 560010
Phone No. : 23385124
GSTIN : 29AAHFN8265D1ZZ 		AAHFN8265D

Download 		1Ordnance Factory Varangaon

Name Specification Use Status
1) STEEL INSERT FOR 5.56 MM INSAS[99]() Specification : BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire E Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) STEEL CORE FOR AK-47 BULLET() Specification : IS : 1570 (Part-II) 1979/40C8 Or BS:970 Part-I 080-M40/709 M40 Hardness : VPN 450 - 600. Oil Blackened/Oil Dipped Drg. No. VA7/PROV/009 Note :- Weight of the Steel Core is 3.19G to 3.27G i.e. 3.23(+/-0.04)G. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) STEEL INSERT FOR 5.56 MM INSAS() Specification : BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) STEEL CORE FOR AK-47 BULLET() Specification : IS : 1570 (Part-II) 1979/40C8 Or BS:970 Part-I 080-M40/709 M40 Hardness : VPN 450 - 600. Oil Blackened/Oil Dipped Drg. No. VA7/PROV/009 Note :- Weight of the Steel Core is 3.19G to 3.27G i.e. 3.23(+/-0.04)G. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) STEEL INSERT FOR 5.56 MM INSAS() Specification : BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) STEEL INSERT FOR 5.56 MM INSAS() Specification : BS : 970 PT - I- 1983, 080 M40/709 M40 or Alternate to Specn. BS : 970 EN 8M Bright Drawn Annealed Wire C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRG. FS-2956C[30]() Specification : R Nonestab
Category : p
Grade : Grade II
Size : S
2667 MANISHA RUBBER ENTERPRISES
50, unique indl. estate, Dr R P Road, Mulund (W), OPP: Jawahar talkies DR R P ROAD Mulund (West) Maharashtra
PIN1 : 400080
Phone No. : 25617712
GSTIN : 27AAAFM6198D1Z7 		MUMM09524E

Download 		1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) O RING 67 5 X 2 4 lf 2013436145 Description : O RING 67 5 X 2 4 lf 2013436145() Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE C Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) O RING 71 X 1 8 PART NO 6413211 LF 2013999912 Description : O RING 71 X 1 8 PART NO 6413211 LF 2013999912() Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961 R Nonestab
2) O RING 71 X 1 65 PART NO 6413243 LF 2013999913 Description : O RING 71 X 1 65 PART NO 6413243 LF 2013999913() Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962 R Nonestab
3) O RING 71 X 1 6 PART NO 6413232 LF 2013999911 Description : O RING 71 X 1 6 PART NO 6413232 LF 2013999911() Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956 R Nonestab
4) O RING 26 X 1 2 PART NO 6439353 LF 2013999908 Description : O RING 26 X 1 2 PART NO 6439353 LF 2013999908() Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959 R Nonestab
5) O RING 67X2 5 PART NO 6413251 LF 2013999907 Description : O RING 67X2 5 PART NO 6413251 LF 2013999907() Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958 R Nonestab
6) O RING 25 1X1 6 PART NO 6416337 LF 2013999903 Description : O RING 25 1X1 6 PART NO 6416337 LF 2013999903() Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954 R Nonestab
7) O RING 30X2 PART NO 6413212 LF 2013999901 Description : O RING 30X2 PART NO 6413212 LF 2013999901() Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953 R Nonestab
8) O RING 28 X 2 6 PART NO 6413250 LF 2013999906 Description : O RING 28 X 2 6 PART NO 6413250 LF 2013999906() Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957 R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) RUBBER HOOD F1301 078691 C LF 2058130002 Description : RUBBER HOOD F1301 078691 C LF 2058130002() Specification : RUBBER HOOD TO DRG. NO. F-1301-078691-C DC NO. 35131-A DATE 5/7/91. MATERIAL SPECN:-IND/ME/884:2015 CLASS-C 60 BSRUBBER HARDNESS DEGREE 60 +5/-4 DC 5403 -ME DT.01-02-2016 R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) O RING LF 9911357869 Description : O RING LF 9911357869() Specification : "O" RING 71*1.65TO DRG.NO.TRD122263 R Estab
2) O RING LF 9911357868 Description : O RING LF 9911357868() Specification : "O" RING 71*1.8 DRG.NO.TRD-122260 R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BALL INSERT FRONT & REAR (9911339844) Description : BALL INSERT FRONT & REAR (9911339844)() Specification : BALL INSERT, FRONT TO DRG. NO. F1301-115180-C DC NO 35780-A DT 22/8/94 SPECN:-F1301-910840-C (CQA-4914) DC(I)-33419-ABALL INSERT REAR TO DRG. NO. F1301-036770-C DC NO-35780-A DT 22/08/94 SPECN:-F1301-902230-C (CQA-4904) DC(I) 33419-A(NEOP C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bolangir

Name Specification Use Status
1) PRESSURE PAD TYPE A & B ASSEMBLY PART[61]() Specification : As per T.E. SPECIFICATION OF PRESSURE PAD TYPE "A" & "B" ASSEMBLY PART C Estab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) O RING 71x1point6 DRG NO TRD 122259O RING LF 9911357865 Description : O RING 71x1point6 DRG NO TRD 122259O RING LF 9911357865() Specification : "O" RING 71*1.6 DRG.NO.TRD-122259 R Estab
Category : p
Grade : 3
Size : S
1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) Rubber Gaskets Description : Rubber Gaskets() Specification : As per Customer Specification. C Estab
2) Rubber plug Description : Rubber plug() Specification : AS PER GCF /DRG/SPECN/IS/BS C Estab
3) Packing Preformed. Description : Packing Preformed.() Specification : AS PER GCF /DRG/SPECN/IS/BS C Estab
Category : ddp
Grade : 3
Size : O
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) WASHER PLUG TRANSIT TO OFAJ DRG NO FS 524 D Description : WASHER PLUG TRANSIT TO OFAJ DRG NO FS 524 D() Specification : WASHER PLUG TRANSIT TO OFAJ DRG. NO. FS-524 D C Estab
Category : ddp
Grade : 1
Size : S
1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6120909014 BLOCK EBONITE MOULDED PLASTIC BLACK Description : 6120909014 BLOCK EBONITE MOULDED PLASTIC BLACK() Specification : IS:6693 C Estab
2) 1003134010 DESMODUR -RE Description : 1003134010 DESMODUR -RE() Specification : DESMODUR "RE"(20% SOLUTION OF TRIPHENYL-METHANE 4 4' 4" TRI ISO CYANATE IN METHYLENE CHLORIDE). C Estab
3) 6580950402 PACKING TO DRG NO 4 24929 3RK33 Description : 6580950402 PACKING TO DRG NO 4 24929 3RK33() Specification : IND/ME/645(A)TYPE'A'CONSISTING OF(1)PART NO. 001 AND (2)PART NO.022 C Estab
4) 6473200461 WASHER NITRILE TO DRG NO 155 1120 Description : 6473200461 WASHER NITRILE TO DRG NO 155 1120() Specification : WASHER, MAT.:NITRILE BLACK SHORE HARDNESS 80+-5 TO DES.REF. 155-1120 DC NO. 36792-A DT. 01.11.2001 FOR SHELL 155 MM HE BB M1A4. C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SENSING ELEMENT (EMPTY ASSEMBLY) Description : SENSING ELEMENT (EMPTY ASSEMBLY)() Specification : DRG. PT. NO. ITX-39A DC 35916A DT.21.02.95 SPECN. CQA(A)1817(t) DC 37096-A, DT.06.03.2007 WITH (1) DUST CUP DRG. PT. NO. ITX-283 DC 35597-A DT.06.10.93 = 01 NO. (2) FASTNER FOR SAFETY PIN CORD DRG. NO. ITX 284 DC 35916-A DT. 21.02.95 = 01 C Estab
2) RING TO DRG.NO.1933 DET.NO.6 Description : RING TO DRG.NO.1933 DET.NO.6() Specification : RING TO DRG.NO.1933 DET.NO.6 TO PT. ITV 172.DC-36529-A DT.18-02-99. C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) O RING I D 38 0 MM 250KG 6241101204[62]() Specification : "O" RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB. C Nonestab
2) Washer for 1000lbs (6220901111)[62]() Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY C Estab
3) NEOPRENE RUBBER WASHER 450 KG (6231401501)[62]() Specification : WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG. NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY C Estab
4) WASHER FOR NOSE PLUG 1000LBS (6220901052)[62]() Specification : WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002, OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM. C Estab
5) WASHER (RUBBER) 250KG (6240901300)[65]() Specification : WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO- PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED. FOR 250 KG HSLD BOMB. C Estab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) RUBBER SLUGS 18MM D X 35MM H[60]() Specification : DRG NO AFK/SK-2675 SHEET NO.1 C Nonestab
2) RING I.R BUNG[20]() Specification : MATL SPEC:K409 QUALB-FOR PRIMER D.C. MK.VIII. C Nonestab
3) SEALING RING ARDE/1508 PK16[60]() Specification : ARDE/SPECN/221 C Nonestab
4) RUBBER RING DRG NO NAI (P) SK 8501[60]() Specification : DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015 R Nonestab
5) SHEET RUBBER EXPANDED SIZE 914.4 MM WIDE X 8 MM THICK[10]() Specification : IND/ME/645 R Nonestab
Category : p
Grade : Grade III
Size : S
2669 PERUMAL ENGINEERING WORKS
No 105 CHAVADI KORATTUR KORATTUR CHENNAI Tamil Nadu
PIN1 : 600080
Phone No. : 0994039004
GSTIN : 33ANWPP0552D1ZZ 		ANWPP0552D

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) BUSH 036[62]() Specification : BUSH E Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) LUG 272[62]() Specification : AS PER VQC ATTACHED E Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) CHAIN 004CB[62]() Specification : CHAIN 172.28.004CB-1 E Nonestab
Category :
Grade : Grade III
Size : S
2670 IFB AUTOMOTIVE PRIVATE LIMITED
PLOT NO IND 5, SECTOR 1, EAST CALCUTTA TOWNSHIP,KOLKATA EAST CALCUTTA TOWNSHIP, KOLKATA West Bengal
PIN1 : 700107
Phone No. : 24428286
GSTIN : 29AABCI2766HIZE 		BLRR00487E

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE (EMPTY) FOR ROUND 40 MM MGL DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009[60]() Specification : DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009 C Nonestab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE TIME & PERCUSSION DA NO. 213 MK5 (M1) EMPTY DESIGN. REF NO. ARDE 1633 DETAIL NO. 1 PT. NO. IQX 52GE SPECN. L 9974-F[63]() Specification : R Nonestab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE T & P 213 MK 5 (M-R) ARDE 2020[99]() Specification : R Nonestab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE TIME & PERCUSSION DA NO. 213 MK5 (M1) EMPTY DESIGN. REF NO. ARDE 1633 DETAIL NO. 1 PT. NO. IQX 52GE SPECN. L 9974-F[63]() Specification : R Nonestab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE T & P 213 MK 5 (M-R) ARDE 2020[99]() Specification : R Nonestab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) PLUG FIRING REPRESENTATING FUZE K3M AS PER DRG NO NASK 997[60]() Specification : DRG. NO. NASK 997 (PROV) C Nonestab
2) PLUG FIRING REPRESENTING FUZE YDB-60 TO DRG. NO. NAI(P)SKETCH 360[60]() Specification : NAI(P) SKETCH 360 DATED 22/11/2012 C Nonestab
3) FUZE K3M HE/PRACTICE[60]() Specification : DRG NO.NAI ((P) SKETCH - 324 DT. 22.11.2012 C Nonestab
4) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]() Specification : I.A. 1204 C Nonestab
5) FUZE PERCUSSION D.A NO 5 A (EMPTY)[63]() Specification : CQA(A) 0922 C Nonestab
6) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO. AFK/SK-215-05[60]() Specification : DRG.NO.AFK/SK-215-05. dt. 13.09.2011 C Nonestab
7) PLUG REPRESENTING FUZE DA5A[63]() Specification : DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285 C Nonestab
8) FUZE HEAD UNIFOIL TYPE (INF MINE)[99]() Specification : DESIGNERS REF NO. CQA(A)/AMN/2875 PART NO. IQX 971 C Nonestab
9) FUZE MINE COMB.M605 ASSEMBLY EMPTY[63]() Specification : CQA(A) 1803 C Nonestab
10) FUZE PERCN DA NO162MK 8 M2 WITH CAP[63]() Specification : CQA(A) 0917 C Nonestab
11) FUZE PERCUSSION DA NO 161 MK3 (M-1) MAZAK WITH CAP EMPTY DESIGN. REF. CIA/AMN/269 PART NO IQX 33 SPECN. CQA(A)0920[63]() Specification : SPECN. CQA(A)0920 C Nonestab
12) PLUG REPRESENTING FUZE FOR 40MM LOW[60]() Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18 R Nonestab
13) A/S ROCKET RGB-12 PRACTICE (EMPTY)[60]() Specification : DRG. NO. NAI(V) 8200 (PROV) DT.11.11.2013 C Nonestab
14) BOMB 81MM HE MORTAR C EMPTY[60]() Specification : CQA (A) 2305 & L 8638-J C Nonestab
15) BOMB 81MM MORTAR B EMPTY BODY[60]() Specification : CQA(A) 2304 & L 8638-J C Nonestab
16) SRCR (EMPTY BODY)[60]() Specification : DRG NO. NASK 828/1.( PROV ) DT.27.7.2000 R Nonestab
17) DUMMY-LRCR & MRCR[61]() Specification : DRG. NO. NASK 975 (PROV.) C Nonestab
18) BODY FOR BOMB 51 MM MORTAR HE 2A TO DESIGNER'S REF.ARDE-1933 DETAIL NO. 2 PART NO.ITV-17 SA SHT 1&2 SPECN CQA(A)- 2322[60]() Specification : CQA(A)- 2322 C Nonestab
19) BODY PROJECTILE[60]() Specification : CQA[A] SEALED DRG NO. 04-749-130222- 01.1E C Nonestab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]() Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A" C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SINGLE PROJECTILE FOR 40MM PRACTICE Description : SINGLE PROJECTILE FOR 40MM PRACTICE() Specification : SINGLE PROJECTILE FOR 40MM PRACTICE MK-II & PROOF MK-II AS PER SPECIFICATION NO. AFK/SPECIFICATION NO. 68 C Estab
Category : ddp
Grade : 3
Size : L
1Machine Tool Proto Type Factory

Name Specification Use Status
1) BALL AND HOUSING ASSY[99]() Specification : BALL AND HOUSING ASSY TO DRG. NO.770-24-33-00 MATERIAL BRASS TO SPEC.BS 249. C Nonestab
Category : ddp
Grade : Grade II
Size : L
1Machine Tool Proto Type Factory

Name Specification Use Status
1) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]() Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982 C Nonestab
Category : ddp
Grade : Grade II
Size : L
2671 CUBEX TUBING LTD
1-7-27 TO 34 1ST FLOOR BLDG COMPLEX SAROJANI ROAD SECUNDERABAD TELANGANA
PIN1 : 500003
Phone No. : 9848034665
GSTIN : 36AAACC5860B1Z1 		AAACC5860B

Download 		1Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) BRASS TUBE 22.35X16.70MM BS2871 M (0717559001) Description : BRASS TUBE 22.35X16.70MM BS2871 M (0717559001)() Specification : SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION. (STRESS RELIEVED). R Estab
Category : p
Grade : 3
Size : M
2672 rajasthan metal smelting co
D-80, road no 7, VKIA ROAD NO 7 JAIPUR Rajasthan
PIN1 : 302013
Phone No. : 2332269
GSTIN : 08AADFR6610E1ZG 		AADFR6610E

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) AUDIO VISUAL WARNING DEVICE (FOR MPV)[90]() Specification : AUDIO VISUAL WARNING DEVICE FOR HIGH TEMPERATURE OF ENGINE COOLANT AND LOW PRESSURE OF ENGINE OIL, AS PER ENCLOSED SPECIFICATION C Estab
2) FLAME SENSOR[90]() Specification : FLAME SENSOR TO SPECIFICATION NO. OFPM/R&D/SP/MPV/FLAME SENSOR C Estab
Category : p
Grade : Grade III
Size : S
2673 BRIJ LAL AND SONS
9D-9F, GATE No. 1, NEHRUBAGH KANPUR-LUCKNOW ROAD, P.O. MAGARWARA DISTT. UNNAO Uttar Pradesh
PIN1 : 209862
Phone No. : 3026019
GSTIN : 09ACFPA1447G1ZZ 		KNPV01285E

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) Canvas Canopy[90]() Specification : As per component drg. / Part No. C Estab
Category : p
Grade : Grade III
Size : S
2674 Kamadhenu Auto CNC Pvt. Ltd.
1015/B 9th Cross 4th Phase Ganapathinagar Bangalore Karnataka
PIN1 : 560058
Phone No. : 7259009326 		BLRK07823E

Download 		1Vehicle Factory Jabalpur

[Deemed Registration]
Name Specification Use Status
1) Drag Link Description : Drag Link() Specification : X3219915 C Estab
Category : dp
Grade : 1
Size : M
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) STUD Description : STUD() Specification : STUD M 14X 1.5, PART NO. X3711915 A C Estab
2) Adaptor F0122615 Description : Adaptor F0122615() Specification : ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A C Estab
3) Adaptor F0129115 Description : Adaptor F0129115() Specification : ADAPTOR M10 PT. No. F-0129115 ADAPTOR M10 -60 DEG X M10 -90 DEG PT.NO.F0129115-A ASSY.- AIR PIPING C Estab
4) Adaptor F7885500 Description : Adaptor F7885500() Specification : ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H. C Estab
5) Adaptor X0117615 Description : Adaptor X0117615() Specification : ADAPTOR ADAPTOR PART NO. X 0117615 HASH C Estab
6) ADAPTOR PART NO X 0100230 C Description : ADAPTOR PART NO X 0100230 C() Specification : ADAPTOR PART NO. X 0100230 C C Estab
7) UNION LEAK OFF Description : UNION LEAK OFF() Specification : UNION LEAK OFF UNION LEAK OFF PART NO. F-0135915-V1 C Estab
Category : p
Grade : 2
Size : S
2675 ESSEN ELECTRONIC SYSTEMS PRIVATE LIMITED
Essen Electronic Systems Private Limited, #32-10-85/22, Venkateswara Colony, Sheela Nagar, BHPV(PO), Visakhapatnam-530012. Venkateswara Colony Visakhapatnam Andhra Pradesh
PIN1 : 530012
Phone No. : 2756162
GSTIN : 37AABCE1826E1Z0 		VPNE00242E

Download 		1Opto Electronic Factory

Name Specification Use Status
1) ELECTRO BLOCK, BL2.300.041 SB[74]() Specification : SPEC. NO. OLF/SPEC/T-90/EBU FOR PNK-4S C Estab
Category : p
Grade : Grade II
Size : SS
1Opto Electronic Factory

Name Specification Use Status
1) AUTOMATIC CONTROL UNIT 9S517-1S[74]() Specification : SPEC. NO. 9S517-1S.00.000 IND TY C Estab
Category : p
Grade : Grade II
Size : SS
2676 SMRJ ENGINEERS PVT LTD
23, 24, Shaktipuram, Prashantinagar, Kukatpally HYDERABAD Telangana
PIN1 : 500072
Phone No. : 23073434
GSTIN : 36AAGCS0888P1ZK 		P9990SCGAA

Download 		1Gun and Shell Factory

Name Specification Use Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]() Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593) C Nonestab
Category :
Grade : Grade III
Size : S
2677 Worldwide Oilfield Machine
Gat No.778, At & Post Velu, Bhor, Pune Satara Road Pune Maharashtra
PIN1 : 412205
Phone No. : 8308215300
GSTIN : 27AAACW1640D1ZQ 		2726033678

Download 		1Ordnance Factory Dehu Road

Name Specification Use Status
1) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]() Specification : DRG. NO. 2440A13003 DC-36552-A C Nonestab
Category : ddp
Grade : Grade I
Size : L
1Ordnance Factory Dehu Road

Name Specification Use Status
1) MACHINING OF FORGED CANISTER[63]() Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address : Govt. Of India, Ministry of Defence (DGQA) Controllerate of Quality Assurance (Amn), Khadki, Pune- 411 003 Telephone: 25824013- C Nonestab
Category : ddp
Grade : Grade I
Size : L
2678 AMAR METERING PUMP
543/1,543/2 DON BOSCO PURAM THUDIAYALUR SARAVANPATTI ROAD COIMBATORE Tamilnadu
PIN1 : 641029
Phone No. : 6900333
GSTIN : 33AACFA3899H1ZE 		CMBA03302F

Download 		1Ordnance Factory Medak

Name Specification Use Status
1) COOLING AND PRE HEATING SYSTEM 675 08 cb2[08]() Specification : COOLING AND PRE HEATING SYSTEM 675 08 cb2 E Estab
Category : p
Grade : Grade I
Size : S
1Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) ASSY OIL PUMP Description : ASSY OIL PUMP() Specification : SB 20-12-00-13 C Estab
2) Air Distributor Description : Air Distributor() Specification : SB 20-10-00-4 C Estab
3) FUEL PUMP ASSY Description : FUEL PUMP ASSY() Specification : CB 20-32-00-4 C Estab
Category : p
Grade : 2
Size : S
2679 Indian Chain Private Limited
238B AJC Bose Road AJC Bose Road Kolkata West Bengal
PIN1 : 700020
Phone No. : 40177000
GSTIN : 19AAACI6291G1ZE 		CALI00017D

Download 		1Ordnance Factory Dehu Road

Name Specification Use Status
1) BOW SHACKLE FOR SHELL 155 MM ILLG[63]() Specification : BOW SHACKLE TO DRG.NO.05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21 FOR SHELL 155MM ILLG. C Nonestab
Category :
Grade : Grade III
Size : S
2680 VIBHUTI INDUSTRIES INDIA PRIVATE LIMITED
E-143, SECTOR 63 GAUTAM BUDH NAGAR NOIDA Uttar Pradesh
PIN1 : 201301
Phone No. : 9911000567
GSTIN : 09AAICV3071D1ZC 		MRTV06004F

Download 		1Gun and Shell Factory

Name Specification Use Status
1) FIRING PIN ASSY TO DRG NO 9 A 621 05 020 SB[72]() Specification : FIRING PIN ASSY. TO DRG. NO. 9-A-621-05-020 SB C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL.[70]() Specification : AS PER DRG OF CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PIN FOR FRONT SIGHT BLOCK AND GAS PORT BLOCK AS PER DRG No K 1211 WITH FIRMS MATERIAL[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Tripod Assembly to drawing number 45P 6000 required for AGS 30[70]() Specification : As per drawing and specification. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Block Gas to ICR 1322 with OFT material[70]() Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl C Nonestab
2) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle C Nonestab
3) COMPLETE MAGAZINE ASSEMBLY TO DRG NO 29 P 0411STAR CONSISTING OF CASE MAGAZINE SUB ASSEMBLY 29 P 0460 SPRING PLOTFORM AND RETAINER SUB ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG C Nonestab
4) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL C Nonestab
5) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]() Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470 C Nonestab
6) REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL[70]() Specification : REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL C Nonestab
7) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]() Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL C Nonestab
8) Manufature and supply of CATCH COCKING HANDLE TO DS CAT NO 1005 001547 ICR 1287 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR RIFLE 7 62MM 1A1[70]() Specification : AS PER THE SPECIFICATION GIVEN E Nonestab
9) Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR[70]() Specification : Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR E Nonestab
10) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]() Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR C Nonestab
11) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]() Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Block Gas to ICR 1322 with OFT material[70]() Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl C Nonestab
2) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL C Nonestab
3) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL C Nonestab
4) PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326[70]() Specification : AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326) C Nonestab
5) PIN EJECTOR LOWER TO DS CAT NO 5315 001757 DC NO 25142 SA DT 10 10 01 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1327[70]() Specification : AS PER DS CAT NO. 5315-001757 DC NO.25142-SA DT.10/10/01 FOR DC NO. LATEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1327) C Nonestab
6) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR C Nonestab
7) FRAME BASKET WELD View AS PER DRG noY19388A 00 FOR MECH SRU ASSY OF SRCG[74]() Specification : FRAME, BASKET, WELD (View) AS PER DRG.no.Y19388A-00. FOR MECH SRU ASSY OF SRCG. R Nonestab
8) ARM COVER RIGHT[74]() Specification : ARM COVER RIGHT (View) AS PER.DGRNO.Y25686A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
9) BRACKET BASKET RIGHT WELD[74]() Specification : BRACKET, BASKET,RIGHT, WELD/Y19378A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
10) BRACKET BASKET LEFT WELD[74]() Specification : BRACKET, BASKET, LEFT, WELD/Y19376A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
11) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]() Specification : AS PER OFT REQUIREMENTS E Nonestab
12) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]() Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR C Nonestab
13) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]() Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290 C Nonestab
14) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]() Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL R Nonestab
15) MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL[70]() Specification : MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL R Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) MAGAZINE SUB ASSEMBLY WITHOUT NICKEL PLATING CTM 0031[70]() Specification : AS PER DRAWING C Nonestab
2) MAGAZINE ASSY FOR POINT 32 INCH PISTOL WITHOUT NICKEL PLATING[70]() Specification : MAGAZINE ASSY FOR 0.32 INCH PISTOL (MK-1M) WITHOUT NICKEL PLATING IN F/C AS PER DRG NO: CTM-180 C Nonestab
3) BRASS PRESSING FOR MAGAZINE TO GSF PRESSING DRG NO 1963 1[63]() Specification : BRASS PRESSING FOR MAGAZINE TO GSF PRESSING DRG NO 1963 1 R Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) COVER TO DRG NO AL8050218 ( LF 9911461522)[99]() Specification : COVER TO DRG NO AL8050218 ( LF 9911461522) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) CASTING FOR BODY FOR BLOCK D 1G46 TO DRG NO AL8021475 (LF 7440200616)[74]() Specification : CASTING FOR BODY FOR BLOCK D 1G46 TO DRG NO AL8021475 (LF 7440200616) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) SET OF 06 TYPES OF MECHANICAL ITEMS LF O 7434011009[74]() Specification : SET OF 06 TYPES OF MECHANICAL ITEMS LF O 7434011009 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) STUD LF NO 7420111144[74]() Specification : STUD LF NO 7420111144 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) PLATE FOR HEAD 1G46 LF NO 7440200771[74]() Specification : PLATE FOR HEAD 1G46 LF NO 7440200771 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) CAP TO DRG NO AL8635652 FOR PARALLELOGRAM (IG-46) (LF 7445108197)[74]() Specification : CAP TO DRG NO AL8635652 FOR PARALLELOGRAM (IG-46) (LF 7445108197) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) COMPLETE MACHINING OF BODY DRG NO AL8021304 LF NO 7565265100[75]() Specification : COMPLETE MACHINING OF BODY DRG NO AL8021304 LF NO 7565265100 C Nonestab
2) COMPLETE MACHINING OF BODY DRG NO AL8021853 LF NO 7565153800[75]() Specification : COMPLETE MACHINING OF BODY DRG NO AL8021853 LF NO 7565153800 C Nonestab
3) COVER DRG NO AL8050953 LF NO 7440206300[74]() Specification : COVER DRG NO AL8050953 LF NO 7440206300 C Nonestab
4) COVER DRG NO AL8050655 LF NO 7445201056[74]() Specification : COVER DRG NO AL8050655 LF NO 7445201056 C Nonestab
5) COVER DRG NO AL8050656 LF NO 7445201057[74]() Specification : COVER DRG NO AL8050656 LF NO 7445201057 C Nonestab
6) LF 7440208893 WRENCH AS PER DRAWING IUMK296449001[74]() Specification : LF 7440208893 WRENCH AS PER DRAWING NO. IUMK 296.449.001 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) SCREW DRIVER DRG NO NBL4094000 WITHOUT ELECTROPLATING LF NO 9001081121[90]() Specification : SCREW DRIVER DRG NO NBL4094000 WITHOUT ELECTROPLATING LF NO 9001081121 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) HANDLE TO DRG NO BSH8671095 LF 7432511066[74]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) BRACKET LF NO 7440200883[74]() Specification : BRACKET LF NO 7440200883 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) BACK STOP LH DRG NO MRS 4000081 LF NO 7440206664[74]() Specification : BACK STOP LH DRG NO MRS 4000081 LF NO 7440206664 C Nonestab
2) PLATE DRG NO MRS 4001003 LF NO 7440206687[74]() Specification : PLATE DRG NO MRS 4001003 LF NO 7440206687 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) BASE LF 7440205774[74]() Specification : BASE LF 7440205774 C Nonestab
2) FLANGE DRG NO Y7493388 LF NO 7440207515[74]() Specification : FLANGE DRG NO Y7493388 LF NO 7440207515 C Nonestab
3) PLUG 56089473 003 LF NO 7440206812[74]() Specification : PLUG 56089473 003 LF NO 7440206812 C Nonestab
4) PULLEY AL8322056 LF 7440200773[74]() Specification : AL8322056 C Nonestab
5) SETTING PIECE AL8604589 LF 7440201617[74]() Specification : AL8604589 C Nonestab
6) CARDEN HEAD AL8236256 LF 7440206006[74]() Specification : AL8236256 C Nonestab
7) PIN AL8960294 LF 7445108229[74]() Specification : AL8960294 C Nonestab
8) SETTING PIECE AL8604431 LF 7445191497[74]() Specification : AL8604431 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9069112686 PLUG BLANKING DOUBLE IAN 280 SA[90]() Specification : 9069112686 PLUG BLANKING DOUBLE IAN 280 SA C Nonestab
2) 9081005847 COVER 3055481 TO ARTICLE NO 1153793[90]() Specification : COVER (3055481) TO ARTICLE NO.1153793. C Nonestab
3) 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551[90]() Specification : 9910448141 NUT PLAIN WING IFL 8551 ILG 20072 IFL 8551 C Nonestab
4) 9069002043 CHAIN RAISING LEFT TO DRG 4028003[90]() Specification : 9069002043 CHAIN RAISING LEFT TO DRG.4028003 C Nonestab
5) 9077301196 LEVER LOADING PENDULUM CAT PART NO 1147159[90]() Specification : LEVER(LOADING PENDULUM) CAT PART NO.-1147159 C Nonestab
6) 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A[90]() Specification : 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A C Nonestab
7) 9069112405 SHAFT ACTUATING LEVER TO DRAWING NO 5047139[90]() Specification : SHAFT ACTUATING LEVER TO DRAWING NO 5047139 C Nonestab
8) 9080081598 VALVE ASSEMBLY TO PART NO 1015 000639 IFL 849SA[90]() Specification : VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) SCREW DRG NO AL8900153 LF NO 9927090980[99]() Specification : SCREW DRG NO AL8900153 LF NO 9927090980 C Nonestab
2) SCREW DRG NO AL8914221 14 LF NO 9927090987[99]() Specification : SCREW DRG NO AL8914221 14 LF NO 9927090987 C Nonestab
3) MACHINING OF HOLDER CASTING DC 590 LF NO 7570159000[75]() Specification : MACHINING OF HOLDER CASTING DC 590 LF NO 7570159000 C Nonestab
4) LF 7440208873 YOKE TO DRG IUMK469143002[74]() Specification : LF 7440208873 YOKE TO DRG.NO. IUMK469143.002 C Nonestab
5) LF 7440208872 YOKE TO DRG IUMK469143001[74]() Specification : LF 7440208872 YOKE TO DRG.NO. IUMK469143.001 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR[70]() Specification : MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SLIDE ASSEMBLY RETRACTING[74]() Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN E Nonestab
2) Solenoid Shot Assy as per Drg No Y18884A 00 for stand weapon Assy of SRCG[74]() Specification : Solenoid Shot Assy as per Drg No.Y18884A-00 for stand weapon Assy of SRCG C Nonestab
3) Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material[70]() Specification : Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material R Nonestab
4) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]() Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SPACER BEARING[74]() Specification : SPACER BEARING (View)074311A-00 FOR COCKING MECH. ASSY OF SRCG.. C Nonestab
2) SPACER[74]() Specification : SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
3) MAGAZINE BOX ASSY[74]() Specification : MAGAZINE BOX ASSY AS PER DRG.Y25676A-00 FOR MAGAZINE ASSY OF SRCG C Nonestab
4) SPACER OIL RETAINER[74]() Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
5) SPACER ROTOR[74]() Specification : SPACER ROTOR (View) AS PER DRG NO.074312A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
6) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]() Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL C Nonestab
7) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
8) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
9) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL C Nonestab
2) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]() Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA C Nonestab
3) MACHINING MILLING AND GRINDING OF ANTI REBOUND C1048 TO DRG NO TEND 2174 STAR WITH FIRMS MATERIAL[70]() Specification : As per TE C Nonestab
4) CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
5) CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
6) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]() Specification : As per TE C Nonestab
7) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]() Specification : As per TE C Nonestab
8) MANUFACTURING OF SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2747 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM CASING C2012 RAW MATERIAL WILL BE SUPPLIED BY OFT[70]() Specification : AS per TE C Nonestab
9) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]() Specification : As per TE C Nonestab
10) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]() Specification : As per TE R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) TRACER BODY DRG NO.F1334-154780-D[99]() Specification : TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) PRIMER BODY WITH CONTACT MOULDED LF 9911356265[99]() Specification : BODY WITH CONTACT TO DRG.PT.NO.IQX 73SA DC 36304-A dt.3-7-97DULY MOULDED WITH GLASS FITTED PHENNOLIC RESIN TO SPCEN.IND/ME/951(PROV) GRADE A DC-3774-ME DT.28-07-2003.(PRIMER BODY & CONTACT WILL BE SUPPLIED BY OFK).LOT SIZE- 5100 NOS. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) CARTG PP3 EOFE EMPTY ASSY TRD 1279 LF 9911351544[99]() Specification : CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23 C Nonestab
2) BODY ASSY 4 26941 060 FOR 81MM SMK LF 9911355970[99]() Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87. C Nonestab
3) HOUSING WITH PIN FINISHED FOR DET L F 9911358156[99]() Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000. C Nonestab
4) SRGM 76 62 MM PRIMER SUB ASSY EMPTY LF 9911358760[99]() Specification : SRGM 76/62 MM PRIMER SUB-ASSY.(EMPTY) CONSISTING FOLLOWING COMPONENTS/SUB ASSY. (1) PRIMER BODY TO DRG.NO. CNA(OF) SK 435/1 (2) ANVIL TO TO DRG.NO. CNA(OF) SK435/2 (3) CAP EMPTY TO DRG.NO. CNA(OF) SK 435/3 (4) Pb-Sn FOIL TO DRG.NO. CNA(OF C Nonestab
5) 84MM CARTRIDGE CASE 502 LF 9911358483[99]() Specification : 84MM CARTRIDGE CASE 502 PART NO. 4106869 C Nonestab
6) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]() Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/ C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) SHAFT TO DRG. NO. 5047139[90]() Specification : SHAFT TO DRG. NO. 5047139 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA[90]() Specification : LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9069040025 FLUB AND SOCKET[90]() Specification : 9069040025 FLUB AND SOCKET DRG. NO CIL-3428-A1 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) Change over switch Assembly 2A26 cb 10 49 cb[90]() Specification : Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details) C Nonestab
2) SWITCH ASSY AND AXLE WITH LEVER[90]() Specification : SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9077301196 LEVER LOADING PENDULUM CAT PART NO 1147159[90]() Specification : LEVER(LOADING PENDULUM) CAT PART NO.-1147159 C Nonestab
2) 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A[90]() Specification : 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) LEAD CONTACT ASSY[72]() Specification : LEAD CONTACT ASSY. TO DRG. NO. 9-A-621-05-030 SB IN F/C FOR AK-630M C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) STUD LEVER CHANGE FOR 7.62 MM ASSAULT RIFLE GHAATAK (WITHOUT HEAT TREATMENT) DRG. NO. RFI SK NO. 10068.[70]() Specification : STUD LEVER CHANGE FOR 7.62 MM ASSAULT RIFLE GHAATAK (WITHOUT HEAT TREATMENT) DRG. NO. RFI SK NO. 10068. C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) MODIFIED SAFETY LEVER FOR 0.32[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) HD.BREECH BOLT UPTO OPN. ST. XIV FOR .315 SPORTING RIFLE[70]() Specification : HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PER RFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE. C Nonestab
2) EXTRACTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS[70]() Specification : EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN C Nonestab
3) BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL).[70]() Specification : BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL). C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) BLOCK REAR BLANK FOR GHAATAK[70]() Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1 C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) MODIFIED LEVER CHANGE FOR ASSAULT RIFLE GHAATAK[70]() Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK) C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) Pin Axis Trigger for 9mm Auto Pistol[7015800394]() Specification : Pin Axis Trigger for 9mm Auto Pistol C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A[70]() Specification : PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) GUARD TRIGGER FOR SPORTING RIFLE[70]() Specification : GUARD TRIGGER FOR 0.22'' SPORTING RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]() Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL C Nonestab
2) SUPPORT TO DRG NO C1062 WITH FIRM MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
3) C1091 BRACKET FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]() Specification : As per TE C Nonestab
4) MANUFACTURING AND SUPPLY OF STOPPER IN FULLY FINISHED CONDITION TO DRG NO C2018 DS CAT NO 4730 007336 THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL[70]() Specification : As per TE C Nonestab
5) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]() Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256[70]() Specification : MACHINING OF HAMMER TO DS CAT NO 1005 001631 DC NO 27070 SA DT 05 05 2017 FROM OFT ISSUED FORGINGS REQUIRED IN FULLY FINISHED CONDITION ICR 1256 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]() Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302 C Nonestab
2) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]() Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle E Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) LEG LEFT FRONT ASSEMBLY REQUIRED FOR MOUNTING TRIPOD 7 62MM MGL4A1 OF MAG GUN[72]() Specification : LEG LEFT FRONT ASSEMBLY TO DRG/DS.CAT.NO.1005-000667 IN FINISHED CONDITION (REQUIRED FOR MOUNTING TRIPOD 7.62MM MGL4A1 OF MAG GUN) C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) ROD COCKING FOR JVPC[70]() Specification : Rod Cocking for JVPC drg. No. 0204.03-04-00-01-012-00DA (I/Code-7012470462) C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) FEED TRAY INTEGRATED FOR LMG BELT FED[70]() Specification : FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT[70]() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG[01]() Specification : AS PER DRG. C Nonestab
2) BODY HOUSING UPPER WELDING FOR JVPC[70]() Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM WITH BRACKET FRONT AND BRACKET REAR DRG NO. SK-5729*2 CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER,BRACKET FRONT AND BRACKET REAR, BODY HOUSING UPPER C Nonestab
3) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]() Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884* C Nonestab
4) Screw Rear Sight for 9X19 mm Machine Pistol[70]() Specification : Screw Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 015 00DA C Nonestab
5) Screw Barrel Mount for 9X19 mm Machine Pistol[70]() Specification : Screw Barrel Mount for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 004 00DA C Nonestab
6) NUT AS PER DRAWING NO SK 6513 TE[70]() Specification : NUT AS PER DRAWING NO SK 6513 TE C Nonestab
7) SLIDE DRG No SK 6534 TE[70]() Specification : SLIDE DRG No SK-6534/TE C Nonestab
8) LATCH DRG No SK 6535 TE[70]() Specification : LATCH DRG No SK- 6535 /TE C Nonestab
9) PIN DRG No SK 6531 TE[70]() Specification : PIN DRG No SK- 6531/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) RETAINER AS PER DRAWING NO SK 6521 TE[70]() Specification : RETAINER AS PER DRAWING NO SK 6521 TE C Nonestab
2) RETAINER Drg No SK 6526 TE[70]() Specification : RETAINER Drg. No. SK-6526/TE C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Bracket Bipod drg no 1005 000061 for LMG 5 56mm[70]() Specification : AS PER DRG. C Nonestab
2) BLOCK GAS IN FINISH CONDITION FOR MAG[70]() Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM) C Nonestab
3) Rear sight for 9X19 mm Machine Pistol[70]() Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA C Nonestab
4) Housing Fore Sight for 9X19 mm Machine Pistol[70]() Specification : Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA C Nonestab
5) Fore Sight for 9X19 mm Machine Pistol[70]() Specification : Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 010 00DA C Nonestab
6) Ejector 9 mm for 9X19 mm Machine Pistol[70]() Specification : Ejector 9 mm for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 007 00DA C Nonestab
7) Barrel Adapter Right for 9X19 mm Machine Pistol[70]() Specification : Barrel Adapter Right for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 002 00DA C Nonestab
8) Barrel Adapter Left for 9X19 mm Machine Pistol[70]() Specification : Barrel Adapter Left for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 003 00DA C Nonestab
9) Cleaning Rod Drg No SK 6574 TE[70]() Specification : Cleaning Rod Drg No. SK- 6574/ TE C Nonestab
10) Pin SK 6508 TE[70]() Specification : Pin SK- 6508 /TE C Nonestab
11) Latch SK 6651 TE[70]() Specification : Latch SK- 6651/ TE C Nonestab
12) Al Forging for Body Cover for MAG[06]() Specification : Al. Forging for Body Cover Drg. No. SKM-174* C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Ejector 9 mm for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 007 00DA[70]() Specification : Ejector 9 mm for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 007 00DA C Nonestab
2) Cap Housing Fore Sight for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 022 00DA[70]() Specification : Cap Housing Fore Sight for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 022 00DA C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) MOUNTING RAIL for JVPC[70]() Specification : MOUNTING RAIL C Nonestab
2) Steel Blank of Cylinder Gas[01]() Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G). C Nonestab
3) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]() Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA C Nonestab
4) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]() Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884* C Nonestab
5) RECEIVER FOR LMG BELT FED[70]() Specification : RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED C Nonestab
6) HOUSING ASSY FOR LMG[70]() Specification : HOUSING ASSY, DS CAT NO-1005-008001 (SAPRE ISSUE) FOR MONOPOD ASSY LMG 5.56MM C Nonestab
7) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
8) Barrel Adapter Right for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 002 00DA[70]() Specification : Barrel Adapter Right for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 002 00DA C Nonestab
9) Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 003 00DA[70]() Specification : Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 003 00DA C Nonestab
10) RECEIVER FOR GPMG WITHOUT HEATTREATMENT[70]() Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PIN LINK TO DS CAT NO.5315-001529 DC NO. 25365-SA DATED 16.5.02 IN FINISHED CONDITION.[70]() Specification : PIN LINK TO DS CAT NO.5315-001529 DC NO. 25365-SA DATED 16.5.02 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) RECEIVER FOR GPMG WITHOUT HEAT TREATMENT[70]() Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG.NO. SK-GPMG-6258* C Nonestab
2) BRUSH ASSEMBLY FOR ACCESSORIES IN CONTAINER ASSY FOR AK203 SAF DRG NO SK 6605TE[70]() Specification : BRUSH ASSEMBLY FOR ACCESSORIES IN CONTAINER ASSY FOR AK203 SAF DRG NO SK 6605TE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF HOLDER IN FULLY FINISHED CONDITION TO DRG NO C2026 DS CAT NO 1005 5650452 THROUGH CASTING ROUTE WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]() Specification : As per TE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PIN FIRING TO DRG NO TEND 1841 STAR 4[70]() Specification : PIN FIRING TO DRG NO TEND 1841 STAR 4 (ICR 1264) FOR RIFLE 7.62MM 1A1 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 9073000265 Chute Ejection to Drg No 675 51 Cd179Cb Ds Cat No 1005 560429[90]() Specification : Chute Ejection to Drg No 675 51 Cd179Cb Ds Cat No 1005 560429 C Nonestab
Category :
Grade : Grade III
Size : S
2681 Venkateshwara Fibreglass Products
Plot No.6 R.I.E Zaheerabad Allipur Zaheerabad Telangana
PIN1 : 502220
Phone No. : 9849391922
GSTIN : 36AAFFV4551N1ZO 		HYDP05824A

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) Modified first aid box[90]() Specification : Modified first aid box C Estab
2) SUPPLY AND FIXING OF RESIN AND HARDENER TO ARREST WATER LEAKAGE FROM VARIOUS SUB ASSEMBLIES OF MPV (ARMY & MHA)[90]() Specification : SCOPE OF WORK P Nonestab
Category : p
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) FRP. DASH BOARD (ARMY VERSION)[90]() Specification : FRP. DASH BOARD (ARMY VERSION) DRG. NO. 645-01-3321-1/A C Estab
2) 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR)[90]() Specification : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WI C Estab
3) FRP DASH BOARD (MHA VERSION)[90]() Specification : FRP DASH BOARD (MHA VERSION) DRG NO: OFPM-640-01-3321-1/A C Estab
Category : p
Grade : Grade III
Size : S

Copyright © 2025 - OFB