Specification : STEEL SQR 13MM TO SPECN.IS:5517-1993 DESIGNATION 55 C8 IN HOT ROLLED AND ANNEALED CONDITION.
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
Description : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE()
Specification : SIDE STOCK TRIGGER GRIP RIGHT SUB-ASSY IN FINISHED CONDITION TO DS CAT NO.1005-000604 DC(I) NO.25283-SA DT.07-03-02 LATEST ISSUE
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel flat 36mm x 62mm for JVPC
Description : Steel flat 36mm x 62mm for JVPC()
Specification : BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) ST ROUND 25 MM DIA GD 708 M40
Description : ST ROUND 25 MM DIA GD 708 M40()
Specification : STEEL ROUND 25 MM DIA.TO SPECN.IS 5517-1993 GD.42 CR4 MO2 LRS-63MM. IN HOT ROLLED AND ANNEALED CONDITION. TEST PIECE TO BE HEAT TREATED TO "T" CONDITION & MECHANICAL PROPERTIES TO BE CHECKED.(REQD.FOR CYLINDER GAS)
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROUND
Description : STEEL ROUND()
Specification : STEEL ROUND 18.00 MM TO SPECN. BS:970PT.1:1983
GD.655 M13 (EN 36B).(FOR STUD CHANGE LEVER).
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL SHEET
Description : STEEL SHEET()
Specification : STEEL SHEET 13 SWG (2.337MM)X1000X2500MM IN COLD ROLLED
AND ANNEALED CONDITION TO SPECN. BS:1449:PT.1:1983.GR.CS-3
SEC.2 OR IS:513:1994 GR.DD.
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL SHEET Point 9MM 20SWG X 1000 X 1500MM
Description : STEEL SHEET Point 9MM 20SWG X 1000 X 1500MM()
Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM ,STEEL IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449
PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD
7606/2.
R
Estab
2) SM SHEET CR
Description : SM SHEET CR()
Specification : SM SHEET CR 1.25X1250X2500MM BS:1449:PT.1:1983 CR-3 SEC.2
OR IS:513:1994 REQD.FOR STOP D S CAT NO 1005-000975 9MM
MAGZINE CARBINE 1A1/CARBURIZING BOX.
R
Estab
3) SM SHEET CR 16 SWG
Description : SM SHEET CR 16 SWG()
Specification : SM SHEET CR 16 SWG TO SPECIFICATION BS 1449:PT.1:1983 CS-3 SEC.2 OR IS:513:1994 DD (SIZE 1.6X1287X2500 OFCR SHEET)
R
Estab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel Round Dia 10mm
Description : Steel Round Dia 10mm()
Specification : STEEL ROUND DIA 10MM SPEC. IS:7283-1974 GD C40
Specification : STEEL ROUND 18.00 MM TO SPECN. BS:970PT.1:1983
GD.655 M13 (EN 36B).(FOR STUD CHANGE LEVER).
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) C.R. Bright Annealed steel strip size 1.05mm (+0.02) thick X 206mm (+(0.0/-1.00) wide X 1045mm (+0.00/-5.00) long specn. Steel to IS :513-1986 latest issue DD quality semi killed fine finish and best surface.()
Specification : C.R. Bright Annealed steel strip size 1.05mm (+0.02) thick X 206mm (+(0.0/-1.00) wide X 1045mm (+0.00/-5.00) long specn. Steel to IS :513-1986 latest issue DD quality semi killed fine finish and best surface.
Specification : STEEL SQUARE 45MM TO SPEC.BS:970 PT.1 1983 GR.708 M40 (OR) EN-19A FOR TRUNNION-TAR (K-4002) OR STEEL SQUARE 45MM TO SPEC.BS:970 PT.1 1983 GR.709 M40 (OR) EN-19 FOR TRUNNION-TAR (K-4002) OR STEEL SQUARE 45MM TO SPEC.BS:970 PT.1 1983 GR.817
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel Round 16mm Dia 1983 GD 420 S37 EN 56 C
Description : Steel Round 16mm Dia 1983 GD 420 S37 EN 56 C()
Specification : Steel Round 16mm Dia. 1983 GD. 420 S37. (EN 56 C)
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BRASS ROD 23 MM BS 2872 CZ 128 LF 0711900023[07]()
Specification : BRASS ROD 23 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| BS|2872-89 GDE-CZ 128.
R
Nonestab
2) BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200[07]()
Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
R
Nonestab
3) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
4) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
R
Nonestab
5) CUPRO NI TUBE 46.8X40.3 MM BMK-07G-55 (0744358500)[07]()
Specification : CUPRO NICKEL TUBING WITH HARDNESS 55 TO 65 Hb IN STRAIGHT LENGTH OF 2 TO 3 MTRS.PACKED PROPERLY TO ENSURE STRAIGHTNESSSIZE 46.8+/-0.20 MM O/D x 40.3+/-0.10 MM I/D (PERMISSIBLEVARIATION IN WALL THICKNESS 0.3MM Max) TO BOFORS SPECN:BMK-07-G
Specification : BRASS TUBING 7.11 +/-0.1 MM I/D X 7.93+/-0.076 MM O/D IN RANDUM LENGTH OF 1 MTR. MIN. EXTRUTED AND DRAWN CONDITIONSPECN: BS:2871 PT-2 OF 1972 CZ-126.
R
Nonestab
7) BRASS ROD 11 MM BS 2874 CZ122 H LF 0712200012[07]()
Specification : BRASS ROD 11 +/-0.10 MM DIA IN THE LENGTH OF 2 METER MIN TO SPECN.BS-2874 CZ-122 H
R
Nonestab
8) BRASS ROD 4MM BSEN12166 CUZN35PB2 LF 0717501004[07]()
Specification : BRASS ROD 4 +/-0.05 MM DIA IN ST. LENGTH OF 2 METERS MIN.TO SPECN.BS EN 12166:2011 DESIGN.CuZn35Pb2 MATERIAL CONDITIONR540 WITH UTS=54-65 Kgf/MM2 & ELONGATION=5% MIN
R
Nonestab
9) BRASS ROD 14 MM BS 2874 CZ124 LF 0711900014[07]()
Specification : BRASS ROD 14+/-0.05 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN.LEADED BRASS CZ-124 SEPCN.BS-2874 (1969).
R
Nonestab
10) BRASS ROD 4MM BSEN12166 CUZN39PB2 LF 0717501005[07]()
Specification : BRASS ROD 4MM BSEN12166 CUZN39PB2
R
Nonestab
11) BRASS ROD 8 5 MM IS 4170 CU ZN 40 LF 0711906010[07]()
Specification : BRASS ROD 8.5 MM DIA X 2.5 TO 3.0 METRE LONG.TO SPECN| IS|4170,CU ZN 40.
R
Nonestab
12) BRASS ROD 6 35MM IS 319 GRD 1 HB LF 0711904006[07]()
Specification : BRASS ROD 6.35 +0.025-0.075 MM DIA IN LENGTH OF 2 MTR (MIN) & 2.5 MTRS (MAX) TO SPECN. IS-319-2007 (FIFTH REVISION)GRADE-1 CONDITION - HB.
R
Nonestab
13) BRASS ROD 9 5MM OD IS 319 89 GR 2 LF 0712100010[07]()
Specification : BRASS ROD SIZE 9.5MM DIA TO SPECN.IS-319-2007 GR-2 (FIFTH - REVISION) HB.COND WITH PROP.TENSILE STRENGTH-380 Mpa MIN.ALONGATION-10% MIN ON 5.65 /5.65 SQ.YEILD STRENGTH - 170 MPaMIN . HARDNESS- 60 TO 80 R.C "B".
R
Nonestab
14) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008[07]()
Specification : BRASS TUBE 14.20 +0.1 O/DX10.80 MM ID X240 MM LONG.DRAWN BRASS TUBING,TYPE CZ 108 TO SPECN|BS|2871(1972)PART.II-INCLUDING AMDT.1(1976).CONDITION M.
R
Nonestab
16) BRASS ROD 17MM BS2874 CZ121 PB3 LF 0712100933[07]()
Specification : COPPER TUBE O/D 46.8 (+/-)0.20MM X I/D 40.3 (+/-)0.10MM IN STRAIGHT LENGTH OF 1.5 Mtr. TO 3 Mtr. TO SPECN- JSS-4710-01-2007 (REV NO.4)GRADE-I
Specification : COPPER TUBE 35.2044 MM +/-0.1016 MM OUTER DIA X 3.2512 MM +/-0.1524 MM WALL THICKNESS IN LENGTH OF 3.0480 TO 3.6576METER TO SPECIFICATION JSS-4710-01-2007 (REV.NO.4) GRADE-1.
Specification : COPPER TUBE O/D 92.5MM +/- 0.25 MM x I/D 83.7+0.30 MM IN ST.LENGTH OF 300MM TO 400MM TO SPECN.JSS-4710-01-2007(REV.NO.4)GR.1 NOTE: WALL THICKNESS VARIATION SHOULD NOT BE MORE THAN0.3MM WITHIN SAME TUBE. MATERIAL TO BE SUPPLIED IN AS DRAWN
R
Nonestab
20) COPPER TUBE 35X2 5MM W T JSS 4710 1 lf 0707255389[07]()
Specification : COPPER TUBE 35+/-0.5 MM O/D X 2.5+/-0.25 MM WALL THICKNESS IN LENGTH OF 1.5 TO 3 METS. MIN. TO SPECN:-JSS-4710-01:2007(REVISION NO.4) GRADE 1 IN HARD DRAWN CONDITION.
R
Nonestab
21) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036
Description : Steel strip cold rolled closed annealed bright finished 3 56mm thick X 80mm wide in length of 2 mtrs LF0122223036()
Specification : Steel strip cold rolled closed annealed bright finished 3.56(+0.10/-0.00) mm thick X 80 +/-0.25mm wide in length of 2 mtrs to specn:- IS-513:2008 (Fifth Revision) Grade "DD" Temper 5(Annealed)
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL ROD 32MM DIA[04]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT A
R
Nonestab
2) STEEL FLAT 125X 8X 530 MM LONG IN CUT LENGTH[01]()
Specification : ST.FLAT 125 X 8 X 530 MM LONG IN CUT LENGTH IN H.R & NORM. CONDN. TO SPECN.IS:5517-1993 DESIGNATION 55C8 TEST PIECE TO BE TESTED AS PER SPECN.TOLLERANCE ON WIDTH +/-2MM,ON THICKNE
SS +/-0.25MM.
R
Nonestab
3) STEEL ROD 4 MM DIA[03]()
Specification : STEEL ROD 4.0MM DIA TO SPECN STEEL BS 970 PT 1:1983 GRADE 835M30.
R
Nonestab
4) DIA 6MM SS WIRE ROD IS6528 1972 GR 04 CR 18 NI 10 FULLY SOFTENED FOR FIRING DEVICE[01]()
Specification : DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED
R
Nonestab
5) SQUARE DRAWN 1 upon 4 Inch ROD FOR FIRING DEVICE[01]()
Specification : SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H
R
Nonestab
6) STEEL STRIP FOR FIRING DEVICE[01]()
Specification : STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
R
Nonestab
7) SS WIRE ROD DIA 10MM[01]()
Specification : SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
R
Nonestab
8) Steel Round Dia 28mm[14]()
Specification : STEEL ROUND DIA 28MM SPEC. BS 970 PT-1: 1983-GR-070 M 20
R
Nonestab
9) STEEL SHEET POINT 9MM 20SWG X 1000 X 1500MM FOR STIRKER MECHANISM[01]()
Specification : STEEL SHEET 0.9MM (20SWG) X 1000 X 1500MM, STEEL IS:1570 (PART-2/SEC-1): 1979 10C4 OR BS:1449 PART-3A) : 1964 GD HS-12 FOR STRIKER AS PER DRG NO. NAD 7606/2.
R
Nonestab
10) STEEL SHEET POINT 9MM 20SWG X1000X1500MM MATL FOR STIKER MECHANISM[01]()
Specification : STEEL SHEET 0.9MM (20SWG) X1000X1500MM.MATL. SPECTV.STA,5V2, V2A,V2B,OR IS:1570 (PART-2/SEC-1)- 1979, 15C4 OR BS:1449 (PART 3A):1964.GD HS-12 FOR FLY OFF LEVER AS PER DRG.NO.NAD 7606/4.
R
Nonestab
11) BRASS TUBE FOR STRIKER MECHANISM[07]()
Specification : BRASS TUBE 5.7(-0.1)MM O/D WALL THICKNESS 0.7MM (22SWG)X 4000MM STA 7 CZ 4 OR CZ 5 OR IS:2501-1963 OR BS:2871-1957,CZ 105, 378-1963, 855- 1963 OR 267-1963 FOR SLEEVE AS PER DRG NO. NAD 7606/7.
R
Nonestab
12) SPRING STEEL WIRE DIA 1 POINT 1 MM FOR STRIKER MECHANISM[01]()
Specification : SPRING STEEL WIRE DIA 1.1MM MATERIAL SPECIV.STA 3 OR 4 OR IS: 4454:2001,SL OR BS:1408:1964, 1408-C FOR SPRING AS PER DRG.ANO.NAD 7606/5
R
Nonestab
13) STEEL ROD DIA 4 MM X4000MM FOR STRIKER MECHANISM[01]()
Specification : STEEL ROD DIA 4.0MM X4000MM AS PER SPECI.STA 5 VIB OR V3 OR IS: 1570 PART 22/SEC-1) :1961 14CI4SI4 OR 20C8 OR BS:970- 1955, EN 7A OR BS:970 (PART-1): 983,070M20 FOR PIN HINGE AS PER DRG.NO. NAD 7606/3.
R
Nonestab
14) STEEL FLAT RECTANGULAR SIZE 40 plus 5 MM X 65 plus 5 MM for TAR[01]()
Specification : STEEL FLAT RECTANGULAR SIZE (40+5)MMX(65+5)MM IN THE LENGTH OF 1.5 TO 3MTR TO SPECN. BS:970 PT1 1983,GR 817 M40 HOT ROLLED AND NORMALISED CONDITION.TEST PIECE HARDNESS TO ACHIEVE 425-475 HV.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165
Description : STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG.
Specification : STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3,CS OR CR
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STEEL ALLOY BAR SAE 4130 PER SAE AMS S 6758 OR SAE 4340 PER SAE AMS S 5000 ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED for SRCG[02]()
Specification : STEEL ALLOY BAR SAE 4130 PER SAE-AMS-S-6758 OR SAE 4340 PER SAE-AMS-S-5000. ROD DIA 90X154L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED. for SRCG
R
Nonestab
2) CRES PLATE 316 PER ASTM A 240 SIZE20TX25WX90L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[03]()
Specification : CRES PLATE 316 PER ASTM-A-240. SIZE:20TX25WX90L (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED.
R
Nonestab
3) ALLOY STEEL PLATE THICK 16 MM SAE 4130 PER SAE AMS 6345 PLATE SIZE 16T X 90L X80W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[02]()
Specification : FOR ALLOYSTEELPLATETHICK16MMSAE4130PERSAE-AMS-6345. PLATE SIZE: 16T X 90L X80W (IN MM). ALLRELEVANTTESTCERTIFICATEFROMNABLLABTO BE SUBMITTED.FORSRCG
R
Nonestab
4) CRES ROD 304L PER ASTM A 276 ROD DIA 14MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED[03]()
Specification : CRES ROD 304L PER ASTM-A-276. ROD DIA 14MM. ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED.
Specification : Steel Sq. 25mm to Specn. BS:970 Part-1:1991 GRD.835 M15 in forged & annealed Condition
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL STRIP 12 5 X 0 28 MM IS 6911 1992 LF 0323060012
Description : STEEL STRIP 12 5 X 0 28 MM IS 6911 1992 LF 0323060012()
Specification : STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG
R
Nonestab
2) STEEL STRIP 90X2MM IS 513 BS1449 LF 0101061544
Description : STEEL STRIP 90X2MM IS 513 BS1449 LF 0101061544()
Specification : STEEL STRIP 90+/-0.5mm WIDE X 2mm THICK TO SPECN-IS-513-2008(FIFTH REV.)GRD. DD OR EDD IN ANNEALED/SKIN PASSED CONDITIONOR BS-1449 Pt-I GR. 1 OR 2 OR 3 (CR/CS) IN ANNEALED/SKINPASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN(HR/
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 18 MM JSS 9510 01 SS D32 LF 0135300018
Description : STEEL ROD 18 MM JSS 9510 01 SS D32 LF 0135300018()
Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION
Description : BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION()
Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION.
R
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL FLAT SIZE 6 X 22 MM IN HOT ROLLED AND NORMALISED CONDN FOR MAG
Description : STEEL FLAT SIZE 6 X 22 MM IN HOT ROLLED AND NORMALISED CONDN FOR MAG()
Specification : STEEL FLAT SIZE:- 6 X 22MM IN HOT ROLLED & NORMALISED CONDN.TO SPECIFICATION BS:970:PT.3:1991:GR.070M55 MATERIAL TO BE TESTED IN HARDENED & TEMPERED CONDITION AS PER RULING SECTION & SEPERATE TEST PIECE NEED TO BE HEAT TREATED TO ACHIEVE
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) CON
Specification : STC RD 1"(25MM) DIA TEMP-B WITH THE FOLLOWING CHEMICAL COMPOSITION:-C%=1.15 TO 1.25 SI%=0.25 MAX., MN%-0.45 MAX., S&P%=0.035 MAX. OR AS PER IS-3749-1978 GRADE T-118
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 0720300095 PB ROUND 95MM DIA STD LENGTH TOM SPECIFICATION IS 7811 1985[70]()
Specification : 0720300095 P.B.ROUND 95MM DIA STD.LENGTH TOM SPECN: IS: 7811-1985.
R
Nonestab
2) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985
R
Nonestab
3) 0720201100 PB ROUND 100MM DIA TO SPECIFICATION IS 28 1985 GRII CONTINOUS CAST IN LENGTH OF 1 METRES OR ITS MULTIPLE LENGTH[70]()
Specification : 0720201100 P.B.ROUND 100MM DIA.TO SPECN.IS:28-1985-GRII(CONTINOUS-CAST) IN LENGTH OF 1.00 METRES OR ITS MULTIPLE LENGTH
R
Nonestab
4) P B ROUND EXTRUDED 140 MM DIA x 1200 MM LONG OR ITS MULTIPLE TO SPECN BS 2874 86 DESIGNATION PB 102 OR IS1385 PCU Sn6[70]()
Specification : P.B.ROUND EXTRUDED 140 MM DIA X 1200 MM LONG OR ITS MULTIPLE TO SPECN.BS:2874-86,DESIGNATION PB-102.OR IS:1385,PCU Sn6.
R
Nonestab
5) P B Rod 127 MM Dai x 1 Mtr Long Or its Multiple to Spec BS 2874 1986 Designation PB 102[70]()
Specification : P B Rod 127 MM Dai x 1 Mtr Long Or its Multiple to Spec BS 2874 1986 Designation PB 102
R
Nonestab
6) 0725577121 PB HOLLOW BAR 135MM OD X 95MM ID IS 28 1985 GRADE 2 CONTINUOUS CAST[70]()
Specification : 0725577121 PB HOLLOW BAR 135MM O/D X 95MM I/D IS:28-1985 GRADE 2 CONTINUOUS CAST
R
Nonestab
7) PHOSPHOR BRONZE ROD 127MM DIA X 1 MTR LONG OR ITS MULTIPLE TO SPECN BS 2874 1986 DESIGNATION PB 102[70]()
Specification : PHOSPHOR BRONZE ROD 127MM DIA X 1 MTR LONG OR ITS MULTIPLE TO SPECN: BS:2874-1986, DESIGNATION PB-102
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
2) STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021[01]()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Nonestab
3) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Nonestab
4) BRASS ROD 21MM BS2874 CZ122 M LF 0712202021[07]()
Specification : BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".
Specification : BRASS STRIP 20+/-0.5MM WIDE X0.71+/-0.02MM THICK TO SPECN: IS-410-1977,GR.CuZn37 COND"O" IN COIL OF 8 METER LENGTHMINIMUM.
R
Nonestab
6) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL ROD 14 5MM IS 4431 14C14S14CD LF 0133001145[01]()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2014)(1st REVESION)GRADE-14C14S14 IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ALLOY STEEL FERROUS & NON-FERRIOUS OD DIFFERENT STANDARDS[10]()
Specification : AS PER SPECIFICATION
R
Estab
Category : S
Grade : III
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) ALLOY STEEL FERROUS & NON-FERRIOUS OD DIFFERENT STANDARDS[01]()
Specification : AS PER SPECIFICATION
R
Nonestab
2) Sheet for JVPC[01]()
Specification : 1.0 mm thickness IS: 513-1994, GD EDD for plate form magazine
R
Nonestab
3) St Rd 3 point 25mm dia for JVPC[01]()
Specification : St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)
R
Nonestab
4) St Rd 4 point 47 MM dia for JVPC[01]()
Specification : St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)
R
Nonestab
5) St Rod 6 point 35 mm dia for JVPC[01]()
Specification : St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)
R
Nonestab
6) St Rod 8 point 23 mm dia for JVPC[01]()
Specification : St. Rod 8.23mm dia for JVPC
R
Nonestab
7) Steel flat 36mm x 62mm for JVPC[01]()
Specification : BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B
R
Nonestab
8) STEEL ROD[01]()
Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS
R
Nonestab
9) STEEL ROD 32MM DIA[01]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MAX,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE E
R
Estab
10) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19[01]()
Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19
R
Nonestab
11) STEEL ROUND dia for JVPC[01]()
Specification : SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)
R
Nonestab
12) Steel wire Spring for JVPC[01]()
Specification : Steel wire Spring for JVPC steel to IS:4454(Part-I) 2001 DH
R
Nonestab
13) DIA 6MM SS WIRE ROD IS6528 1972 GR 04 CR 18 NI 10 FULLY SOFTENED FOR FIRING DEVICE[01]()
Specification : DIA 6MM SS WIRE ROD IS6528-1972 GR 04 CR 18 NI 10 FULLY SOFTENED
R
Nonestab
14) RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.[01]()
Specification : SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.
R
Nonestab
15) SPG STEEL WIRE 1.216 MM (18SWG)[01]()
Specification : SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE
R
Nonestab
16) SPRING STEEL WIRE FOR CARBINE 5 56[01]()
Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2
R
Nonestab
17) SS WIRE ROD DIA 10MM[01]()
Specification : SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
R
Estab
18) ST FLAT SIZE 22 X 60MM[01]()
Specification : ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,
R
Estab
19) ST RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION[03]()
Specification : ST.RD.22MM DIA IN HOT ROLLED & ANNEALED CONDITION TO SPECN IS:6527:1995,DESIGNATION X30CR 13 (FOR PLUG GAS).
R
Estab
20) ST ROUND 8 MM DIA[03]()
Specification : ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82
R
Estab
21) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).[01]()
Specification : ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.
R
Nonestab
23) ST STRIP MM FOR REVOLVER[01]()
Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
R
Estab
24) ST STRIP FOR LMG[01]()
Specification : ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT).
R
Nonestab
25) ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36[01]()
27) STEEL FLAT 17X47MM IN HOT ROLLED AND ANNEALED AT 650 C[01]()
Specification : SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED IN `T'CONDITION MACRO ETCH TEST & NMIR TEST AS PER ANNEXURE-A NATURE-C.(REQD.FOR-SHOULDER LOCKING LEFT & RIGHT DS CAT 1005-007907)
C
Nonestab
28) STEEL FLAT 22X18MM FOR MAG[03]()
Specification : SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM)
R
Estab
29) STEEL FLAT 25X32MM[03]()
Specification : STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM)
R
Nonestab
30) STEEL FLAT 32X11MM FOR MAG[03]()
Specification : STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT
R
Estab
31) STEEL FLAT 70 X 34 MM IN HOT ROLLED and ANNEALED CONDITION[03]()
Specification : SPECN.BS:970:PT-3:1991.GD.410S21 OR 420S29.TEST PIECE TO BE TESTEDAS PER RULINF SECTION. MATL.SHOULD SATISFY MACRO-ETCH TEST &MICROSCOPIC NON-METALIC INCLUSION RATING AS PER NATURE-C A SEPARATE T.P.TO BE HARDNED TO ACHIEVE HARDNESS 265
33) STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM)[01]()
Specification : SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40
R
Estab
34) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION[03]()
Specification : STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE.
R
Nonestab
35) STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.[01]()
Specification : SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.
R
Estab
36) STEEL RD 25MM DIA FOR MAG[01]()
Specification : SPECN.BS:970:PT-3:1991 GD.420S29 OR 431S29HARDENED & TEMPERED BARS TO HARDNESS 265-300 BHN.MACRO ETCH & NMIR TEST TO BE CARRIED OUT AS PER ANNEXURE NATURE `C'. (REQUIRED FOR GAS REGULATOR D S CAT NO. 1005-006614)
R
Estab
37) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE[03]()
Specification : SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE
R
Estab
38) STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8[03]()
39) STEEL RD 45MM DIA IN HOT ROLLED AND ANNELED CONDITION FOR MAG[01]()
Specification : SPECNIS:5517-1993 DESIG.42CR4MO2.TEST PIECE TO BE TESTED IN`V' CONDITION.MATL. SHOULD ALSO SATISFY MACRO ETCH & NMIR TEST AS ANNEXURE NATURE-C A SEPERATE T.P. IS TO BE QUENCHED & TEMPERED BEFORE MACHINING TO ACHIEVE HARDNESS 280-335HB.
R
Nonestab
40) STEEL RD 8MM DIA FOR MAG[01]()
Specification : BS 970 PT 1:1983 GR 431 S-29 OR 20 S-37 EN 56C
R
Estab
41) STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION[03]()
Specification : SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 TEST PIECE TO BE TESTED IN `Z' CONDITION.
R
Estab
42) STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER )[03]()
Specification : STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A A
Specification : STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TO SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS
R
Nonestab
46) STEEL ROUND 12MM DIA[03]()
Specification : STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.
Specification : STEEL ROUND 20MM DIA TO SPECN.BS:970:PT.1:1983 GD.080M40 IN HOT ROLLED &NORMALISED CONDITION. TEST PIECE TO BE TESTED AS PER THE SPECIFICATION.
R
Estab
49) STEEL ROUND 27 MM[03]()
Specification : STEEL ROUND 27 MM TO SPECN.IS:5517-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD).
R
Nonestab
50) STEEL SQR 37MM FOR MAG[03]()
Specification : SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION
Specification : STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD)
R
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) ALLOY STEEL FERROUS & NON-FERRIOUS OD DIFFERENT STANDARDS[01]()
Specification : AS PER SPECIFICATION
R
Estab
2) Sheet for JVPC[01]()
Specification : 1.0 mm thickness IS: 513-1994, GD EDD for plate form magazine
R
Nonestab
3) St Rd 3 point 25mm dia for JVPC[01]()
Specification : St. Rod 3.25MM dia to Specn. IS:5517-1993.40CB(EN-8) (Pin St. Hdls. Cocking Bracket & Gas block)
R
Nonestab
4) St Rd 4 point 47 MM dia for JVPC[01]()
Specification : St. Rd. 4.47MM dia to Specn. IS:5517-1993.GD-55CB(EN-9)(5 types of Pin)
R
Nonestab
5) St Rod 6 point 35 mm dia for JVPC[01]()
Specification : St. Rod 6.35 mm dia to Specn. IS: 3748-1990 T90MN6WCR2 (Rod Cocking)
R
Nonestab
6) St Rod 8 point 23 mm dia for JVPC[01]()
Specification : St. Rod 8.23mm dia for JVPC
R
Nonestab
7) Steel flat 36mm x 62mm for JVPC[01]()
Specification : BS:970 Pt.I 1983 GD 835 M 15 OR EN-39-B
R
Nonestab
8) STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3[01]()
Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS A
R
Nonestab
9) STEEL ROD 32MM DIA[01]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MAX,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE EL
R
Nonestab
10) STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19[01]()
Specification : STEEL ROD DIA 8MM STEEL TO IS:5517-1993,GD-42CR4M02 0R EN-19
R
Nonestab
11) STEEL ROUND dia for JVPC[01]()
Specification : SPECN:IS:5517-1993 grade 40 NI 6CR4 Mo3(EN-24)
R
Nonestab
12) Steel wire Spring for JVPC[01]()
Specification : Steel wire Spring for JVPC steel to IS:4454(Part-I) 2001 DH
R
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Gun and Shell Factory
[Deemed Registration]
Name
Specification
Use
Status
1) BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE
Description : BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE()
Specification : BRASS ROUND 38.1 +0.25mm DIA TO SPECN BS-2874-CZ-121 PB3-"M" IN THE LENGTH OF2 MTRS (MINIMUM) LONG BAR. LATEST ISSUE
R
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) SPRING STEEL WIRE FOR CARBINE 5 56
Description : SPRING STEEL WIRE FOR CARBINE 5 56()
Specification : SPRING STEEL WIRE DIA. 1.30MM TO SPECN- IS:4454:PT-1:2001GD-DH WITH UTS VALUE MIN 2300N/MM2
R
Estab
2) ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36
Description : ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36()
3) ST ROUND 8 MM DIA
Description : ST ROUND 8 MM DIA()
Specification : ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82
Specification : STEEL ROUND 25 MM DIA.TO SPECN.IS 5517-1993 GD.42 CN4 MO2 LRS-63MM. IN HOT ROLLED AND ANNEALED CONDITION. TEST PIECE TO BE HEAT TREATED TO "T" CONDITION & MECHANICAL PROPERTIES TO BE CHECKED. ( REQD.FOR CYLINDER GAS )
R
Estab
5) STEEL FLAT 22X18MM FOR MAG
Description : STEEL FLAT 22X18MM FOR MAG()
Specification : SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM)
Specification : STEEL ROUND 12MM.DIA TO SPECN.BS:970.PT:1.1983.GD 835-M-15 OR GD-655 M-13.(EN-39B OR 36B) REQUIRED FOR EXTRACTOR SMALL ARMS CARTRIDGE TO DRG NO.ARDE/SK-2689/250.
R
Estab
7) STEEL FLAT 32X11MM FOR MAG
Description : STEEL FLAT 32X11MM FOR MAG()
Specification : STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT
R
Estab
8) LEADED PHOS BRONZE ROD 32MM DIA
Description : LEADED PHOS BRONZE ROD 32MM DIA()
Specification : LEADED PHOS.BRONZE ROD 32MM DIA TO SPECN.BS:2874:1969 PB102M
R
Estab
9) SS WIRE ROD DIA 10MM
Description : SS WIRE ROD DIA 10MM()
Specification : SS WIRE ROD DIA 10MM SPEC. IS 6527-1978 GR 04 CR 18 NI 10
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) forged and annealed steel
Description : forged and annealed steel()
Specification : F & A STEEL ROD 50MM DIA MSF CL XIII/3
R
Estab
2) STEEL STRIP FOR MFG OF VANE
Description : STEEL STRIP FOR MFG OF VANE()
Specification : STEEL STRIP TO SIZE 0.62MM(+0.06MM-0.00)THICK X 121MM (+0.00,-2.0MM) WIDE X 1000(+5MM, -0.00MM) LONG MATERIAL SPECN. STEEL TO IS: 1570 C 15 QUALITY HAVING BEST SURFACE IN COLD ROLLED AND ANNEALED CONDITIOIN & CARBON PERCENTAGE 0.62% MAX
R
Estab
3) STEEL
Description : STEEL()
Specification : STEEL TO SPECN. IS: 7283-1974 WITH PROPERTIES CONFIRMING TO IS:226-1975 TO SIZE : 115(+-1.8)MM DIA.
R
Estab
4) STEEL ROD TO SPECN IS 1570 C 14
Description : STEEL ROD TO SPECN IS 1570 C 14()
Specification : STEEL ROD TO SPECN. IS:1570C14 SIZE 6.50MM (+0.125MM)DIA (STRIKER ROD ARM-1099 C2 , ITEM NO. 2) AS PER DRG NO. SK-9314
Specification : COLD ROLLED BRIGHT ANNEALED STEEL SHEET MADE FROM FULLY KILLED STEEL AS PER BS: 1449 PT 1 1983 GRADE -43/35 SIZE : 95MM+-0.25 WIDE THICKNESS 2.0MM+-0.06X920+15 MM LONG.( PART NO. ITV-46)
R
Estab
7) HOT ROLLED STEEL ROD 35MM
Description : HOT ROLLED STEEL ROD 35MM()
Specification : HOT ROLLED STEEL ROD 35MM (+0.07/-0.13) DIA SPECN. IS:1570 C-15 MN 75 FOR STRIKER HEAD AS PER DRG. NO. SK-6570/A MULTIPLE LENGTH OF 1 MTR
R
Estab
8) CD STEEL ROD 16MM DIA IS 1570 C 15
Description : CD STEEL ROD 16MM DIA IS 1570 C 15()
Specification : CD STEEL ROD 16MM DIA IS 1570 C 15
R
Estab
9) STEEL ROD
Description : STEEL ROD()
Specification : STEEL TO SPECN. IS: 1570 C-15 MN75 COLD DRAWN ROD 9/16" DIA (+0.005" - 0.00) IN LENGTH 12 TO 16FT. (FOR TRANSIT SAFETY PIN) (DRG. NO. ARM-1099-C-3 ITEM NO.7)
R
Estab
10) COLD DRAWN STEEL ROD 28 MM
Description : COLD DRAWN STEEL ROD 28 MM()
Specification : COLD DRAWN STEEL ROD 28 MM (+0.00/-0.13) DIA TO SPECN. IS: 1570, C20 IN 1 MTR LENGTH OR ITS MULTIPLE FOR LUG SUSPENSION (ITEM NO.8) OF ARM- 1099 C3/OFC DRG. NO. SK-6772.
R
Estab
11) STEEL ROD 5MM DIA
Description : STEEL ROD 5MM DIA()
Specification : COLD DRAWN STEEL ROD TO SPECN. IS: 1570, C-20 TO SIZE :5MM (+0.00, -0.125 ) DIA 2.5 MTRS.TO 4 MTRS LONG. HOOK FOR LUG SUSPENSION.
R
Estab
12) Steel rod 85mm dia
Description : Steel rod 85mm dia()
Specification : Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758
R
Estab
13) STEEL STRIP
Description : STEEL STRIP()
Specification : STEEL STRIP TO SIZE: 0.62MM (+0.06MM/-0.00) THICK X218MM (+0MM/-2MM) WIDE X900MM (+5MM/-0MM) LONG MATERIAL SPECN. STEEL TO IS: 1570 C-15 QUALITY HAVING BEST SURFACE IN COLD ROLLED AND ANNEALED CONDITIONS AND C%0.20% MAX (FOR MANUFACTURING
R
Estab
14) BRASS TUBE
Description : BRASS TUBE()
Specification : BRASS TUBE TO SIZE : O/D 9.53+/-0.076MM X 0.71MM WT IN MULTIPLE LENGTH OF 115MM TO SPECN. IS:407-1966 ALLOY-1 IN ANNEALED CONDITION OF STD. FOR CENTRAL TUBE
(DRG. NO. ARM-1099C4 ITEM NO.19)
R
Estab
15) MS ROUND
Description : MS ROUND()
Specification : STEEL TO SPECN. IS:1570,C 20 COLD DRAWN ROD 1-1/4" (+0.004") IE 31.75MM DIA IN STANDARD LENGTH ( TAIL PLUG ARM -1099C4 ITEM NO. 20 AS PER OFC DRG. NO. SK-9757
R
Estab
16) FORGED TO DIA 229
Description : FORGED TO DIA 229()
Specification : FORGED TO DIA 229(+20MM) IN LENGTH OF 1 TO 1.5 METERS AS PER GR.MSF IX/3 (%C -0.95-1.15, SI -0.15-0.25, MN -2.0-2.5, S -0.03MAX, P-0.03MAX-CR.-0.3MAX) OR T90MN2W50CR45 AS PER IS:1570-1961)
Specification : STEEL FORGED ROUND 152MM DIA USUAL FORGING TOLERANCE IN LENGTH OF 1 TO 3 METERS MSF CL. IX/3 (%C-0.95-1.15, SI-0.15-0.25, MN-2.0-2.5, S-0.03 MAX P-0.03MAX, CR-0.3MAX) OR T90MN2W50CR45 AS PER IS: 1570-1961
R
Estab
18) STEEL ROD OF DIA 175MM
Description : STEEL ROD OF DIA 175MM()
Specification : STEEL ROD OF DIA 175MM X 60MM LENGTH OR ITS MULTIPLE LENGTH TO SPECN: IS:3749-1978 XT215 CR12 IN FORGED ANNEALED , SKIN TURN AND ULTRASONCALLY SOUND CONDITION, AS PER IS: 8791-1978
R
Estab
19) STEEL ROD 102
Description : STEEL ROD 102()
Specification : STEEL ROD 102 (+10)MM (4") DIA IN LENGTH OF 1 MTR TO 2 MTRS CLASS -IX/3 (%C-0.95-1.15, SI-0.15-0.25, MN -2.0-2.5,S-0.03MAX. P-0.03MAX, CR-0.03MAX) OR T90MN2W50CR45 AS PER IS: 1570-1961
R
Estab
20) STEEL ROD 200 DIA
Description : STEEL ROD 200 DIA()
Specification : STEEL ROD 200 DIA (+0/-5MM) (IS: 3749-1978-XT-215 CR12 IN 350MM LENGTH & ABOVE
R
Estab
21) STEEL ROD 108MM
Description : STEEL ROD 108MM()
Specification : STEEL ROD 108 MM (+10MM) DIA TO SPECIFICATION MSF CL. IX/3 OF T90MN2W50CR45 AS PER IS: 1570-1961 IN LENGTH OF 1-2 MTR (FORGED AND ANNEALED)
R
Estab
22) STEEL ROD 3 INCH DIA
Description : STEEL ROD 3 INCH DIA()
Specification : STEEL ROD IN FORGED & ANNEALED CONDITION AS PER SIZE: & SPECN. RD77MM(3") DIA TO MSF CL XIII/3 OR T103 AS PER IS: 1570-1961
R
Estab
23) STEEL F AND A ROD 210 DIA X70MM SAE H10
Description : STEEL F AND A ROD 210 DIA X70MM SAE H10()
Specification : STEEL FORGED & ANNEALED ROD 210 (+/-2 MM) DIA X 70 MM (+5MM) OR ITS MULTIPLE LENGTH OF 1 TO 2 METRE TO SPECN. SAEH -10 IN ROUGH MACHINED & ULTRASONICALLY SOUND CONDITION AS PER IS: 8791-1978 CLAUSE 9.1(A).
R
Estab
24) STEEL FLAT
Description : STEEL FLAT()
Specification : STEEL FLAT TO SIZE 12MM X 300MM TO SPECN. T-105CR5MN2 OF IS: 3749-1978 OR BS: 970 EN -31 IN LENGTH OF ONE TO TWO MTRS.
R
Estab
25) HSS ROUND 20 MM DIA ASP 30
Description : HSS ROUND 20 MM DIA ASP 30()
Specification : HIGH SPEED STEEL ROUND 20 MM DIA TO SPECN. ASP-30 TOLERANCE AS PER IS: 10604 (PART-I) 1983.
R
Estab
26) MS FLAT
Description : MS FLAT()
Specification : MS FLAT 8MM X 200MM X1250MM AS PER IS: 5517-1978
R
Estab
27) Steel Flat to size 10mmX200mm in length of one meter
Description : Steel Flat to size 10mmX200mm in length of one meter()
Specification : MSF Class IX/3 or XII I/3 In forged & machined condition(Chemical composition: C-0.85-0.95%,SI-0.15-0.25%,MN-2.00-2.5%,S-0.03%,P- 0.03%,CR - 0.3%
R
Estab
28) FORGED AND ANNEALED STEEL ROD
Description : FORGED AND ANNEALED STEEL ROD()
Specification : FORGED AND ANNEALED STEEL ROD OF DIA 83MM (+10MM) IN LENGTH OF 1 TO 2 METER & GR. MSF IX/3 OR T90MN2W50CR45 AS PER IS: 1570-1961
R
Estab
29) COPPER 99 PERCENT PURE SIZE 40MM SQR
Description : COPPER 99 PERCENT PURE SIZE 40MM SQR()
Specification : COPPER 99 PERCENT PURE SIZE 40MM SQR
R
Estab
Category : p
Grade : 2
Size :
M
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) forged and annealed steel
Description : forged and annealed steel()
Specification : F & A STEEL ROD 50MM DIA MSF CL XIII/3
R
Estab
2) STEEL STRIP FOR MFG OF VANE
Description : STEEL STRIP FOR MFG OF VANE()
Specification : STEEL STRIP TO SIZE 0.62MM(+0.06MM-0.00)THICK X 121MM (+0.00,-2.0MM) WIDE X 1000(+5MM, -0.00MM) LONG MATERIAL SPECN. STEEL TO IS: 1570 C 15 QUALITY HAVING BEST SURFACE IN COLD ROLLED AND ANNEALED CONDITIOIN & CARBON PERCENTAGE 0.62% MAX
R
Estab
3) STEEL
Description : STEEL()
Specification : STEEL TO SPECN. IS: 7283-1974 WITH PROPERTIES CONFIRMING TO IS:226-1975 TO SIZE : 115(+-1.8)MM DIA.
R
Estab
4) STEEL ROD TO SPECN IS 1570 C 14
Description : STEEL ROD TO SPECN IS 1570 C 14()
Specification : STEEL ROD TO SPECN. IS:1570C14 SIZE 6.50MM (+0.125MM)DIA (STRIKER ROD ARM-1099 C2 , ITEM NO. 2) AS PER DRG NO. SK-9314
Specification : COLD ROLLED BRIGHT ANNEALED STEEL SHEET MADE FROM FULLY KILLED STEEL AS PER BS: 1449 PT 1 1983 GRADE -43/35 SIZE : 95MM+-0.25 WIDE THICKNESS 2.0MM+-0.06X920+15 MM LONG.( PART NO. ITV-46)
R
Estab
7) HOT ROLLED STEEL ROD 35MM
Description : HOT ROLLED STEEL ROD 35MM()
Specification : HOT ROLLED STEEL ROD 35MM (+0.07/-0.13) DIA SPECN. IS:1570 C-15 MN 75 FOR STRIKER HEAD AS PER DRG. NO. SK-6570/A MULTIPLE LENGTH OF 1 MTR
R
Estab
8) CD STEEL ROD 16MM DIA IS 1570 C 15
Description : CD STEEL ROD 16MM DIA IS 1570 C 15()
Specification : CD STEEL ROD 16MM DIA IS 1570 C 15
R
Estab
9) STEEL ROD
Description : STEEL ROD()
Specification : STEEL TO SPECN. IS: 1570 C-15 MN75 COLD DRAWN ROD 9/16" DIA (+0.005" - 0.00) IN LENGTH 12 TO 16FT. (FOR TRANSIT SAFETY PIN) (DRG. NO. ARM-1099-C-3 ITEM NO.7)
R
Estab
10) COLD DRAWN STEEL ROD 28 MM
Description : COLD DRAWN STEEL ROD 28 MM()
Specification : COLD DRAWN STEEL ROD 28 MM (+0.00/-0.13) DIA TO SPECN. IS: 1570, C20 IN 1 MTR LENGTH OR ITS MULTIPLE FOR LUG SUSPENSION (ITEM NO.8) OF ARM- 1099 C3/OFC DRG. NO. SK-6772.
R
Estab
11) STEEL ROD 5MM DIA
Description : STEEL ROD 5MM DIA()
Specification : COLD DRAWN STEEL ROD TO SPECN. IS: 1570, C-20 TO SIZE :5MM (+0.00, -0.125 ) DIA 2.5 MTRS.TO 4 MTRS LONG. HOOK FOR LUG SUSPENSION.
R
Estab
12) Steel rod 85mm dia
Description : Steel rod 85mm dia()
Specification : Steel to specn. IS 1570-13 S-25 or 11 S25 of IS:1570-1979 size 85 mm (+/-1.30) dia in standard length (center plug Arm-1099 C4 Item No. 17) as per Drg. No. SK-9758
R
Estab
13) STEEL STRIP
Description : STEEL STRIP()
Specification : STEEL STRIP TO SIZE: 0.62MM (+0.06MM/-0.00) THICK X218MM (+0MM/-2MM) WIDE X900MM (+5MM/-0MM) LONG MATERIAL SPECN. STEEL TO IS: 1570 C-15 QUALITY HAVING BEST SURFACE IN COLD ROLLED AND ANNEALED CONDITIONS AND C%0.20% MAX (FOR MANUFACTURING
R
Estab
14) BRASS TUBE
Description : BRASS TUBE()
Specification : BRASS TUBE TO SIZE : O/D 9.53+/-0.076MM X 0.71MM WT IN MULTIPLE LENGTH OF 115MM TO SPECN. IS:407-1966 ALLOY-1 IN ANNEALED CONDITION OF STD. FOR CENTRAL TUBE
(DRG. NO. ARM-1099C4 ITEM NO.19)
R
Estab
15) MS ROUND
Description : MS ROUND()
Specification : STEEL TO SPECN. IS:1570,C 20 COLD DRAWN ROD 1-1/4" (+0.004") IE 31.75MM DIA IN STANDARD LENGTH ( TAIL PLUG ARM -1099C4 ITEM NO. 20 AS PER OFC DRG. NO. SK-9757
R
Estab
16) FORGED TO DIA 229
Description : FORGED TO DIA 229()
Specification : FORGED TO DIA 229(+20MM) IN LENGTH OF 1 TO 1.5 METERS AS PER GR.MSF IX/3 (%C -0.95-1.15, SI -0.15-0.25, MN -2.0-2.5, S -0.03MAX, P-0.03MAX-CR.-0.3MAX) OR T90MN2W50CR45 AS PER IS:1570-1961)
Specification : STEEL FORGED ROUND 152MM DIA USUAL FORGING TOLERANCE IN LENGTH OF 1 TO 3 METERS MSF CL. IX/3 (%C-0.95-1.15, SI-0.15-0.25, MN-2.0-2.5, S-0.03 MAX P-0.03MAX, CR-0.3MAX) OR T90MN2W50CR45 AS PER IS: 1570-1961
R
Estab
18) STEEL ROD OF DIA 175MM
Description : STEEL ROD OF DIA 175MM()
Specification : STEEL ROD OF DIA 175MM X 60MM LENGTH OR ITS MULTIPLE LENGTH TO SPECN: IS:3749-1978 XT215 CR12 IN FORGED ANNEALED , SKIN TURN AND ULTRASONCALLY SOUND CONDITION, AS PER IS: 8791-1978
R
Estab
19) STEEL ROD 102
Description : STEEL ROD 102()
Specification : STEEL ROD 102 (+10)MM (4") DIA IN LENGTH OF 1 MTR TO 2 MTRS CLASS -IX/3 (%C-0.95-1.15, SI-0.15-0.25, MN -2.0-2.5,S-0.03MAX. P-0.03MAX, CR-0.03MAX) OR T90MN2W50CR45 AS PER IS: 1570-1961
R
Estab
20) STEEL ROD 200 DIA
Description : STEEL ROD 200 DIA()
Specification : STEEL ROD 200 DIA (+0/-5MM) (IS: 3749-1978-XT-215 CR12 IN 350MM LENGTH & ABOVE
R
Estab
21) STEEL ROD 108MM
Description : STEEL ROD 108MM()
Specification : STEEL ROD 108 MM (+10MM) DIA TO SPECIFICATION MSF CL. IX/3 OF T90MN2W50CR45 AS PER IS: 1570-1961 IN LENGTH OF 1-2 MTR (FORGED AND ANNEALED)
R
Estab
22) STEEL ROD 3 INCH DIA
Description : STEEL ROD 3 INCH DIA()
Specification : STEEL ROD IN FORGED & ANNEALED CONDITION AS PER SIZE: & SPECN. RD77MM(3") DIA TO MSF CL XIII/3 OR T103 AS PER IS: 1570-1961
R
Estab
23) STEEL F AND A ROD 210 DIA X70MM SAE H10
Description : STEEL F AND A ROD 210 DIA X70MM SAE H10()
Specification : STEEL FORGED & ANNEALED ROD 210 (+/-2 MM) DIA X 70 MM (+5MM) OR ITS MULTIPLE LENGTH OF 1 TO 2 METRE TO SPECN. SAEH -10 IN ROUGH MACHINED & ULTRASONICALLY SOUND CONDITION AS PER IS: 8791-1978 CLAUSE 9.1(A).
R
Estab
24) STEEL FLAT
Description : STEEL FLAT()
Specification : STEEL FLAT TO SIZE 12MM X 300MM TO SPECN. T-105CR5MN2 OF IS: 3749-1978 OR BS: 970 EN -31 IN LENGTH OF ONE TO TWO MTRS.
R
Estab
25) HSS ROUND 20 MM DIA ASP 30
Description : HSS ROUND 20 MM DIA ASP 30()
Specification : HIGH SPEED STEEL ROUND 20 MM DIA TO SPECN. ASP-30 TOLERANCE AS PER IS: 10604 (PART-I) 1983.
R
Estab
26) MS FLAT
Description : MS FLAT()
Specification : MS FLAT 8MM X 200MM X1250MM AS PER IS: 5517-1978
R
Estab
27) Steel Flat to size 10mmX200mm in length of one meter
Description : Steel Flat to size 10mmX200mm in length of one meter()
Specification : MSF Class IX/3 or XII I/3 In forged & machined condition(Chemical composition: C-0.85-0.95%,SI-0.15-0.25%,MN-2.00-2.5%,S-0.03%,P- 0.03%,CR - 0.3%
R
Estab
28) FORGED AND ANNEALED STEEL ROD
Description : FORGED AND ANNEALED STEEL ROD()
Specification : FORGED AND ANNEALED STEEL ROD OF DIA 83MM (+10MM) IN LENGTH OF 1 TO 2 METER & GR. MSF IX/3 OR T90MN2W50CR45 AS PER IS: 1570-1961
R
Estab
29) COPPER 99 PERCENT PURE SIZE 40MM SQR
Description : COPPER 99 PERCENT PURE SIZE 40MM SQR()
Specification : COPPER 99 PERCENT PURE SIZE 40MM SQR
R
Estab
Category : p
Grade : 2
Size :
M
2682
OM ENGINEERS AND SUPPLIERS
159-B DADA NAGAR KANPUR U.P.
PIN1 : 208022
Phone No. : 9919632538 GSTIN : 09AABFO0382J1Z7
1) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04
Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04()
Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) CARTRIDGE GUIDE PAWL DS CAT 1005-006626
Description : CARTRIDGE GUIDE PAWL DS CAT 1005-006626()
Specification : AS PER DRG
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
2) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
C
Nonestab
3) SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE[70]()
Specification : SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
C
Nonestab
4) SCREW SPECIAL FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB
C
Nonestab
5) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
2) SCREW SPECIAL FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB
C
Nonestab
3) SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB
C
Nonestab
4) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
5) Nut Castellated Hexagon[70]()
Specification : NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
3) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
2) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509STR FOR K1202STR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
2) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
3) ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL[70]()
Specification : ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL
C
Nonestab
4) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
5) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN AXIS DEPRESSION LEVER TO PART NO BOF 6097384[90]()
Specification : PIN AXIS DEPRESSION LEVER TO PART NO BOF-6097384
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 5060095 5060095 Y[90]()
Specification : BUSH TO DRG NO 5060095 5060095 Y
C
Nonestab
2) BUSH BOF 6164802[90]()
Specification : BUSH BOF 6164802
C
Nonestab
3) BUSH BOF 6104225 Y[90]()
Specification : BUSH BOF 6104225 Y
C
Nonestab
4) PIN TO DS CAT NO 5315 001004[90]()
Specification : PIN TO DS CAT NO 5315 001004
C
Nonestab
5) PIN AXIS DEPRESSION LEVER BOF 6097384[90]()
Specification : PIN AXIS DEPRESSION LEVER BOF 6097384
C
Nonestab
6) PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932[90]()
Specification : PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
C
Nonestab
7) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]()
Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005
C
Nonestab
2) PIN DISASSEMBLY FOR REVOLVER SIDE SWING[70]()
Specification : PIN DISASSEMBLY FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-06/4 SW.
C
Nonestab
3) PIN HAMMER DOG FOR REVOLVER SIDE SWING[70]()
Specification : PIN HAMMER DOG FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/5 SW.
C
Nonestab
4) WASHER EJECTOR ROD FOR REVOLVER SIDE SWING[70]()
Specification : WASHER EJECTOR ROD FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-04/7 SW.
C
Nonestab
5) Body Finished Through IC for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PEGS NIGHT LINE MG MK I[70]()
Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138.[71]()
Specification : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) AXIS PIN AS PER DRG. NO.5174739[71]()
Specification : AXIS PIN AS PER DRG. NO.5174739 FOR 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PRE MACHINING ACTUATING AXLE SHAFT DRG.NO.4077843[71]()
Specification : PRE MACHINING ACTUATING AXLE SHAFT DRG.NO.4077843 MATERIAL BS:970 PT 1983 GRADE 835 M30 COMPONENT OF 155 FH BO
FORS.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.[72]()
Specification : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) F/M CAM CONTROL HANDLE[71]()
Specification : F/M CAM CONTROL HANDLE
S
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.[71]()
Specification : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF LOCKING PLATE[76]()
Specification : FINISH COMPONENT OF LOCKING PLATE AS PER DRG.NO.161-1490 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF TOP SLIDE 176 1118[76]()
Specification : FINISH COMPONENT OF TOP SLIDE AS PER DRG.NO.176-1118 FOR SHARANG ORD.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAP FOR SHARANG 161 473[76]()
Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) KEY AS PER DRG 161 480[76]()
Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PLUNGER AS PER DRG 161 463 FOR SHARANG[76]()
Specification : PLUNGER AS PER DRG 161-463 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAM CONTROL HANDLE[71]()
Specification : CAM CONTROL HANDLE
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.[71]()
Specification : EXTRACTOR AS PER DRG NO.4081489 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138.[71]()
Specification : BRACKET DRG NO-155/COMP-5/98.BASED ON DRG NO-6 358 138. REQD FOR 155MMM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) AXIS PIN AS PER DRG. NO.5174739[71]()
Specification : AXIS PIN AS PER DRG. NO.5174739 FOR 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) COLLAR SHAFT AS PER DRG No 3040 003628[41]()
Specification : COLLAR SHAFT AS PER DRG No 3040 003628
C
Estab
2) PACKING NUT AS PER DRG No 4730 006960[41]()
Specification : PACKING NUT AS PER DRG No 4730 006960
C
Estab
3) SCREW AS PER DRG No 5305 003184[41]()
Specification : SCREW AS PER DRG No 5305 003184
C
Estab
4) PLUG AS PER DRG No 1015 000547[41]()
Specification : PLUG AS PER DRG No 1015 000547
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.[72]()
Specification : FINISH MACHINING OF BOLT AS PER DRG NO.2A20-01-32.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. 32-0601 MK-III[70]()
Specification : HAMMER TO DRG. NO. 32-0601 MK-III,MATERIAL BS 970 PT I 1983 GD:070 M-55(B.S 970 EN-9) ALT.MATERIAL: FROM I.C ROUTE I.C DRG NO.SK-5377R BS 3146 Pt.1-1974. TYPE CLASS-12 Gr.A.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) LOCKING PIECE FOR SHARANG ORD[76]()
Specification : LOCKING PIECE AS PER DRG.NO.166-217
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FIXING PIN FOR SHARANG ORD[76]()
Specification : FIXING PIN AS PER DRG.NO.176-1212 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FIXING PIN 1185[76]()
Specification : FIXING PIN AS PER DRG.NO.176-1185 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) ADOPTER 161[76]()
Specification : ADOPTER AS PER DRG.NO.161-1500 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF TOP SLIDE 176 1118[76]()
Specification : FINISH COMPONENT OF TOP SLIDE AS PER DRG.NO.176-1118 FOR SHARANG ORD.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAP FOR SHARANG 161 473[76]()
Specification : CAP AS PER DRG NO-161-473 FOR SHARANG ORDNANCE
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) KEY AS PER DRG 161 480[76]()
Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF KEY 176 1104 FOR SHARANG[76]()
Specification : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PLUNGER AS PER DRG 161 463 FOR SHARANG[76]()
Specification : PLUNGER AS PER DRG 161-463 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAM CONTROL HANDLE[71]()
Specification : CAM CONTROL HANDLE
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) COLLAR SHAFT AS PER DRG No 3040 003628[41]()
Specification : COLLAR SHAFT AS PER DRG No 3040 003628
C
Estab
2) PACKING NUT AS PER DRG No 4730 006960[41]()
Specification : PACKING NUT AS PER DRG No 4730 006960
C
Estab
3) SCREW AS PER DRG No 5305 003184[41]()
Specification : SCREW AS PER DRG No 5305 003184
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Nonestab
2) FEED ARM FOR AIR VERSION for MAG[70]()
Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) OILER HAND NO1 MK1 MAG GUN[71]()
Specification : OILER HAND NO.1 MK1 FOR GUN M /C (MAG) 7.62MM 2A DS-CATNO.4930-000799 DC(I)NO.25144-SA DATED 11-10-2001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Rear Spring Recoil for JVPC[70]()
Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA
C
Nonestab
2) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BARREL COVER ASSEMBLY FOR JVPC[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) LEVER PIN LOCKING IN FINISHED CONDITION[70]()
Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.[70]()
Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER[70]()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON CATCH MAGAZINE FOR JVPC[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD
C
Nonestab
2) Rod Front Spring Recoil for JVPC[70]()
Specification : Rod Front Spring Recoil for JVPC 5.56MM DRG. No. 204-03-02-00-06-003-00DD
C
Nonestab
3) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER for MAG[70]()
Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SIGHT REAR FOR MAG[70]()
Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLIP for MAG[70]()
Specification : CLIP TO DS CAT NO. 5340-007354 DC NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
2) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Threaded Piston Extension for CQB DRG No 1901 01 01 00 03 002 00DC[70]()
1) BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.[70]()
Specification : BACK SIGHT D S CAT NO-1005-000823 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24314-SA-DT.06-04-1999.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.[70]()
Specification : SIGHT REAR FOR MAG 7.62MM TO DRG. NO. DS CAT NO. 1005-006621 DC(I) NO. 25317-SA DT- 03.04.2002 IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CATCH REAR SIGHT CURSOR FOR MAG 7.62 MM[70]()
Specification : AS PER DRAWING
C
Estab
2) Pin for Pin Safety in finished condition of Striker Mechanism[70]()
Specification : Pin for Pin Safety in finished condition as
per Drawing No NAD 7606/1A of Striker
Mechanism No 8 MK-1
C
Estab
3) CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.[70]()
Specification : CATCH FEED COVER FOR MAG 7.62MM TO DS CAT NO. 1005-006627 DC(I) NO. 25321-SA DT- 08.04.2002 IN FINISHED CONDITION.(MAT. AGAINST L.F 0614230110 WILL BE SUPPLIED BY FACTORY AGAINST BANK GUARNTEE.
C
Estab
4) FEED ARM FOR AIR VERSION for MAG[70]()
Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION
C
Estab
5) FORE SIGHT 1005 007737 IN FINISHED CONDITION[70]()
Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16
C
Estab
6) GUIDE, UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 25338-SA DT- 23.4.02 IN WITHOUT HEAT TREATMENT CONDITION.[70]()
Specification : GUIDE, UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 25338-SA DT- 23.4.02 IN WITHOUT HEAT TREATMENT CONDITION.
C
Estab
7) FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION.[70]()
Specification : FRONT GUIDE RETURN SPRING TO DS CAT NO. 2540-002853 DC(I) NO. 25535-SA DT-30/09/2002 IN FINISHED CONDITION. (MATERIAL WILL BE SUPPLIED BY S.A.F ON FREIGHT TO PAY AGAINST B/G.
C
Estab
8) Housing Plunger to DS CAT NO 1005 007900[70]()
Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16
C
Estab
9) HOUSING REAR SIGHT FOR CARBINE 5 56MM[01]()
Specification : HOUSING REAR SIGHT IC TO DRG NO. AKC-08/1/1 I.C.* FOR CARBINE 5.56MM.
C
Estab
10) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Estab
11) LEVER EXTRACTOR FOR REVOLVER[70]()
Specification : LEVER EXTRACTOR DRG.NO.PH-1-7 IN FINISHED CONDITION D.A. NO. 05/18 DT. 07-03-18.
C
Estab
12) LINK LOWER for MAG[70]()
Specification : LINK (LOWER) TO DS CAT NO. 1005-000469 DC(I) NO. 25303-SA DT- 23.01.02 IN FINISHED CONDITION WITHOUT HT & PLATING.
AS PER DRG
C
Estab
13) LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.[70]()
Specification : LINK (UPPER) TO DS CAT NO. 1005-000468 DC(I) NO. 25303-SA DT- 23.3.02 IN FINISHED CONDITION WITHOUT HT & PLATING.
C
Estab
14) LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.[70]()
Specification : LINK CROSS PIECE (SHORT) PART NO. 2065E TO DS CAT NO. 1005-006821 DC(I) NO. 25328-SA DT- 13.04.02 IN FINISHED CONDITION.
C
Estab
15) LOCATING FLANGE TRIGGER TO DS CAT NO. 1005-000623 DC(I) NO. 25310-SA DT-30.3.02 IN FINISHED CONDITION.[70]()
Specification : LOCATING FLANGE TRIGGER TO DS CAT NO. 1005-000623 DC(I) NO. 25310-SA DT-30.3.02 IN FINISHED CONDITION.
C
Estab
16) LOCK RETAINER IN FINISHED CONDITION[70]()
Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10.
C
Estab
17) Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition[70]()
Specification : Lug Sling to DRG No.-ARDE/SK-3145/69, DS CAT No. 1005-008025 in finished condition
C
Estab
18) Machining of Cap back of 9 mm Carbine DS CAT No. 1005-000860[70]()
Specification : AS PER DRG.
C
Estab
19) MULTI TOOTH LOCK WASHER[70]()
Specification : MULTI-TOOTH LOCK WASHER TYPE -C,COUNTERSUNK NOMINAL SIZE 5.3AS PER IS:5371/1989 OR LATEST EDITION SPRING STEEL PHOSPHATED.
C
Estab
20) NUT LOCKING BARREL for MAG[70]()
Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02
C
Estab
21) PAWL FEED FRONT TO DS CAT NO.1005-006637 DC(I) NO. 25321-SA DT- 08.04.02[70]()
Specification : PAWL FEED FRONT TO DS CAT NO.1005-006637 DC(I) NO. 25321-SA DT- 08.04.02 (I.C.DRG.NO. SKM 740*2 AGAINST LF NO. 0145077022 WILL BE SUPPLIED BY SAF AGAINST B/G)
C
Estab
22) PAWL FEED CENTRAL FOR MAG 762 MM[70]()
Specification : PAWL FEED CENTRAL IN FINISHED COND. DS CAT NO. 1005-006639 DC(I) NO. 27019-SA DT. 28.01.2017 FOR MAG 7.62MM
C
Estab
23) PIN AUTO SEAR FOR JVPC[70]()
Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB
C
Estab
24) Pin Barrel Locking Catch[70]()
Specification : As per Drawing
C
Estab
25) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]()
Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.
C
Estab
26) Pin fixing barrel DRG. No. PH-1-9[70]()
Specification : As per Drg.
C
Estab
27) PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO 5315 009175[70]()
Specification : PIN COCKING HANDLE IN FINISHED CONDITION TO DS CAT NO.5315-009175.DC(I) NO.26927-SA DT.02.09.16
C
Estab
28) Pin Groove Headed For Trigger & Safety Sear drg .no. ARDE SK-2689/132 for LMG/Rifle 5.56mm[70]()
Specification : AS PER DRG.
C
Estab
29) Pin Grooved Headed for Hammer DS CAT NO 5315 009190[70]()
Specification : Pin Grooved Headed for Hammer DS CAT NO 5315 009190
C
Estab
30) Pin grooved Headed for Hinge cover for Carbine 5 56[70]()
Specification : PIN GROOVED HEADED FOR HINGE COVER TO DRG. NO.ARDE/SK- 3143/29.DS CAT NO.5315-009188 DC(I) NO.26927-SA DT.02.09.16
C
Estab
31) PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]()
Specification : PIN HAMMER DRG NO AKC 01/16 FOR CARBINE 5.56MM IN FINISHED CONDITION
C
Estab
32) PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION[70]()
Specification : PIN HINGE CONNECTOR BUTT DRG NO AKC 01/17 FOR CARBINE 5.56MMIN FINISHED CONDITION.
C
Estab
33) PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION.[70]()
Specification : PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION.
C
Estab
34) PIN RETAINING GAS CYLINDER for MAG[70]()
Specification : PIN RETAINING GAS CYLINDER TO DS CAT NO. 5315 - 001518 DC(I) NO. 27105-SA DT.20.06.17 IN FINISHED CONDITION.
C
Estab
35) PIN RETAINING GAS CYLINDER TO DS CAT NO. 5315 - 001518 DC(I) NO. 26138-SA DT- 02.02.06 IN FINISHED CONDITION.[70]()
Specification : PIN RETAINING GAS CYLINDER TO DS CAT NO. 5315 - 001518 DC(I) NO. 26138-SA DT- 02.02.06 IN FINISHED CONDITION.
C
Estab
36) PIN RETAINING HANDLE COCKING SLIDE for MAG[70]()
Specification : PIN RETAINING HANDLE COCKING SLIDE TO DS CAT NO. 5315-004849 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION.
C
Estab
37) PIN STRAIGHT HEADED OF GRIP LEFT ASSY FOR FIRING DEVICE IB FOR MINE[70]()
Specification : PIN STRAIGHT HEADED AS PER DRG.NO. CQA (I)-393/19,CAT/PT.NO.5315-008702 OF GRIP LEFT ASSY FOR DEVICE FIRING IB FOR MINE
C
Estab
38) PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG[70]()
Specification : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL TO DS CAT NO. 5315-001514 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION.
C
Estab
39) PIN STRAIGHT HEADLESS AXIS LOCKING LEVER for MAG[70]()
Specification : PIN STRAIGHT HEADLESS (AXIS LOCKING LEVER) TO DS CAT NO. 5315-001525 DC(I) NO.27012-SB DT- 14.1.17 IN FINISHED CONDITION.
C
Estab
40) PIN TRIGGER HAMMER AND SEAR SAFETY for JVPC[70]()
Specification : PIVOT FEED LEVER DS CAT NO.1005-000462 DC NO. 25298-SA DTD.19.3.02
C
Estab
42) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Estab
43) PLUNGER CATCH FOR MAG[70]()
Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Estab
44) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10[71]()
Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
C
Estab
45) Rear Feed Pawl FOR MAG[70]()
Specification : Rear Feed Pawl to DS CAT no. 1005-006638 DC(I) NO. 25321-SA, DT. 08-04-02 in finished condition
C
Estab
46) Rear Sight Cursor for MAG 7.62MM Drg No. 1005-000433[70]()
Specification : AS PER DRG. DS CAT 1005-000433 DC (I) 26752-SA DTD. 03.04.2015
C
Estab
47) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III[70]()
Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III
C
Estab
48) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010
C
Estab
49) Ring for Pin Safety[70]()
Specification : Ring for Pin safety alternative design in finished condition for Striker Mechanism drawing No. NAD 7606/1A
R
Estab
50) RIVET SNAP HEAD FOR BLOCK REAR FOR CARBINE 5 56[70]()
Specification : RIVET SNAP HEAD FOR BLOCK REAR AS PER DRG. NO. SK- 3543L* PROTECTIVE FINISH:-PHOSPHATED TO SPECN.JSS 0465-01-1988. CLASS II OIL FINISH
C
Estab
51) ROLLER FOR MAG[70]()
Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG.
C
Estab
52) ROLLER GUIDE FEED SLIDE LOWER FOR MAG[70]()
Specification : DS CAT NO.3120-004657 IN FINISHED CONDITION DC NO. 25298-SA , DT.19-03-02 (MAT.ST.RD.10 MM DIA GD.535A99 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0352001010
C
Estab
53) ROLLER GUIDE FEED SLIDE UPPER FOR MAG[70]()
Specification : DS CAT NO. 3120-004658, DC NO.27108-SA,DT.23-06-17 IN FINISHED CONDITION (MATL.ST ROD.10 MM DIA WILL BE SUPPLIED BY S.A.F.ON B/G FROM L.F.NO.0352001010AS PER DRG.AS PER DRG.
C
Estab
54) Screw Barrel Cover for JVPC[70]()
Specification : Screw Barrel Cover M5x20 for 5.56 MM as per IS: 1366
C
Estab
55) SIDE STOCK TRIGGER GRIP LEFT IN FINISHED CONDITION FOR MAG[70]()
Specification : SIDE STOCK TRIGER GRIP LEFT IN FINISHED CONDITION TO DS CAT NO.1005-000602 DC (I) NO.25286 -SA DT:11 /03/2002
C
Estab
56) SLEEVE BOLT COVER IN FINISHED CONDITION[70]()
Specification : SLEEVE BOLT COVER IN FINISHED CONDITION DS CAT NO.1005-006624 DC (I) NO.26159-SA,DT.09-02-06 (MATL.ST.ROD 1/2" DIA GD.605M36 FROM L.F NO.0283001013/02830 00012 WILL BE SUP.BY.SAF .ON B/G.
C
Estab
57) SEAR TRIPPER FOR MAG[70]()
Specification : DRG.DS CAT NO.1005-000620 DC (I) NO.27019-SA DT.28.1.17 IN FINISHED CONDITION.
C
Estab
58) SPLIT COLLAR GAS REGULATOR FOR MAG[70]()
Specification : SPLIT COLLAR, GAS REGULATOR TO DS CAT NO. 1005-000402 DC(I) NO. 25292-SA DT- 14.3.02 IN FINISHED CONDITION.
12) CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.[70]()
Specification : CLEANING TOOL SA NO.1 MK-1 FOR GUN M/C (MAG) 7.62MM 2A TO DS CAT NO.1005-000767 DC NO.20900-SA DT13-08-90 IN FINISHED CONDITION.
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CATCH REAR SIGHT CURSOR FOR MAG 7.62 MM[70]()
Specification : AS PER DRAWING
C
Estab
2) Pin for Pin Safety in finished condition of Striker Mechanism[70]()
Specification : Pin for Pin Safety in finished condition as
per Drawing No NAD 7606/1A of Striker
Mechanism No 8 MK-1
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN LOCKING CONNECTOR TO DRG. NO. BOF-6101832[90]()
Specification : PIN LOCKINGCONNECTOR TO DRG. NO. BOF-6101832
C
Nonestab
2) PIN LEFT TO DRG. NO. BOF-5047186[90]()
Specification : PIN LEFT TO DRG. NO. BOF-5047186
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN SHOULDER TO DRG. NO. 5315-001003[90]()
Specification : PIN SHOULDER TO DRG. NO. 5315-001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN TO DRG. NO. BOF - 6009603[90]()
Specification : PIN TO DRG. NO. BOF - 6009603
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN LEFT TO DRG. NO. BOF-5047186[90]()
Specification : PIN LEFT TO DRG. NO. BOF-5047186
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN SHOULDER TO DRG. NO. 5315-001003[90]()
Specification : PIN SHOULDER TO DRG. NO. 5315-001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIN (L-7/247A) TO DRG. NO. BOF - 6127321[90]()
Specification : PIN (L-7/247A) TO DRG. NO. BOF - 6127321
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PLUNGERS HEAD LOCKING PIN TO PART NO 6112420[90]()
Specification : PLUNGERS HEAD LOCKING PIN TO PART NO 6112420
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081005312 LOCKING PIN D 12MM L 90MM PT 517149[90]()
Specification : LOCKING PIN D=12MM,L=90MM PART NO 5171493IN 5171492 WITH 4
ITEM AS LIST: A) Locking pin (KIPP PART NO K0366-25812090)
EQUIVALENT TO GCF PART NO 5171493 (QUANTITY:1).
B) KEY RING N5-12-20X2, 5(KIPP PART
C
Nonestab
2) 9081005313 LOCKING PIND 10M L 60MM PT 5171492[90]()
Specification : LOCKING PIN D=10MM,L=60MM PART NO 5171492 WITH 4 ITEMS AS
LIST: A) LOCKING PIN(KIPP PART NO K0366-25110060) EQUIVALENT
TO GCF PART NO 5171492(QUANTITY:1).
B) KEY RING N5-12-20X2,5(KIPP PART NO KO367.230
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 L F No 7024012072[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Nonestab
2) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]()
Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)
C
Nonestab
3) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
4) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
5) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
6) PIN LOCKING PIN FIRING AND EXTRACTOR COMPONENT DRG NO 6P11 3 17 DRG NO 62 C 3017 200 D3[70]()
Specification : AS PER DRAWING OF PIN LOCKING PIN FIRING AND EXTRACTOR COMPONENT DRG NO 6P11 3 17 DRG NO 62 C 3017 200 D3
R
Nonestab
7) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle
C
Nonestab
3) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
4) PIN STOP BOLT LOCKING TO DR NO 29P 0048STAR required for 0POINT315 Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
5) SCREW PLATE BUTT TO DRG NO 29P 0059STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
6) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
7) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
8) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
9) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
10) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON FEED BOX A3-134 MAG7.62MM[70]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Holdall SA 1A 1005 000005[70]()
Specification : Holdall SA 1A DS CAT No. 1005-000005
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Fore Sight Housing[70]()
Specification : Fore Sight Housing to DS CAT No. 1005-000426 in without Heat Treatment Condition
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLANK OF BLOCK GAS For JVPC[70]()
Specification : BLANK OF BLOCK GAS For JVPC
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN REAR MOUNTING for MAG[70]()
Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) LOCK WASHER JZE-2.55 (HEAT-551)[99]()
Specification : LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TRACER BODY DRG NO.F1334-154780-D[99]()
Specification : TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) RIVET 2X10 TO DRG NO TRD 1 2 2239 LF 9911357870[99]()
Specification : RIVET 2x10 TO DRG.NO.TRD-1-2-2239.
C
Nonestab
2) SLIDING DISC PART NO 6413413 LF 9911358440[99]()
Specification : SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627
R
Nonestab
3) WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670[99]()
Specification : WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
C
Nonestab
4) WASHER AS PER DRG NO TRD 1 1 3223 LF 9911358675[99]()
Specification : WASHER AS PER DRG MKTA 754152 003 TRD 1 1 3223 ALT
C
Nonestab
5) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
C
Nonestab
6) DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772[99]()
Specification : DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC
C
Nonestab
7) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BAND RETAINER TO DS CAT NO 5340 015713[70]()
Specification : BAND RETAINER TO DS CAT NO. 5340-015713 D.C.NO. 26928-SA DT. 02.09.16 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ROD CLEANING FOR MAG[71]()
Specification : ROD CLEANING 7.62MM BARREL GAS CYLINDER 1ATO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95IN FINISHED CONDITION.,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS[70]()
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
2) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
3) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
4) RETAINER Drg No SK 6526 TE[70]()
Specification : RETAINER Drg. No. SK-6526/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
4) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
5) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
6) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
7) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
8) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SCREW SEAR TO DRG NO 29P 0058 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO 29P 0058 required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
2) SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
3) SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
4) SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
5) PIN COCKING ARM TO DRG NO. 32P 4103*2 (FULLY FINISHED) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) FRONT FEED PAWL for MAG
Description : FRONT FEED PAWL for MAG()
Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02
C
Estab
2) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG
Description : PIVOT COVER SLIDE GUIDE ROLLER FOR MAG()
1) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]()
Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]()
Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11
C
Nonestab
2) SEAT BASE ASSY FRONT LHS[90]()
Specification : SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C
C
Nonestab
3) 9010398122000 BUMPER ASSY AND DETAILS FOR UPGRADED MPV 4X4[90]()
Specification : DRG. 2725-57-31
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31[90]()
Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON LH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2699 57 31
C
Nonestab
2) MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32[90]()
Specification : MOD STEPNEY MOUNTING ARRANGEMENT ON RH SIDE FOR UPGRADED MPV 4 by 4 DRG NO 2700 57 32
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) TAIL UNITASSEMBLY[62]()
Specification : TAIL UNIT ASSEMBLY TO DRG.NO.AAIW/BS-0071
CONSISTING OF CONE TO DRG NO. AAIW/BS-0071/1, STABILISER FIN TO DRG NO. AAIW/BS-0071/2, STABILISER RING ASSEMBLY TO DRG NO. AAIW/BS-0071/3, AND BASE BUSH TO DRG NO. AAIW/BS-0071/4.
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TAIL UNIT NO- TB 250 (9911358363)[99]()
Specification : TAIL UNIT NO.TB-250,DRG.NO.ARDE-9501-03 DT.19 APR 2000.AND SPECN.NO.ARDE/SPECN./613 PROVISIONALLY APPROVED ON 19 APR2000 AND AMENDED VIDE RCMA(AA)/1440/5/TECH DATED 29 APR 2010.PACKAGE DESCRIPTION-BOX STEEL NO.1 MK-I TO HOLD 1 TO DRG.NO.AR
C
Nonestab
Category : ddp
Grade : Grade III
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL)[65]()
Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576
Specification : FABRICATION OF SHIRT MAN’S ANGOLA DRAB POLY WOOL MODIFIED PATTERN 2012.
SWO PART II No.60235
SPECIFICATION :
1) DIMENSION : AS PER SPECN NO.IND/TC/4552(L).
2) CERTIFIED SAMPLE : AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENT
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo (modified).[21]()
Specification : FABRICATION OF JACKET COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED).
SWO PART II No.60234
SPECIFICATION No : OCFAV/Garment/001(b)
MAKE & SHAPE : AS PER APPROVED SAMPLE
NOTE:
A) CUT COMPONENTS & GARNITURE WILL BE SUPPLIE
E
Nonestab
2) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo (modified).[21]()
Specification : FABRICATION OF TROUSER COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED).
SWO Pt II No.60233
SPECIFICATION No. OCFAV/Garment/002(b)
MAKE & SHAPE : AS PER APPROVED SAMPLE
NOTE:
A) CUT COMPONENTS & GARNITURE WILL BE SUPPL
E
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Fabrication of Shorts Cotton Light OG[21]()
Specification : FABRICATION OF SHORTS COTTON LIGHT OG
SWO PART II No.60215
SPECIFICATION:
1) DIMENSION : AS PER SPECN NO. PROV/OCFAV/GARMENT/005
2) CERTIFIED SAMPLE : AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS & GARNITURES WILL BE SU
E
Nonestab
2) FABRICATION OF OVERALL CE[21]()
Specification : FABRICATION OF OVERALL CE
SWO PART No. 60158
SPECIFICATION: No. IND/NAVY/TC/4660 WITH AMENDMENT NO.1
NOTE:
CUT COMPONENTS AND GARNITURES WILL BE SUPPLIED BY THE FACTORY.
DRAWING & SAMPLE WILL BE PROVIDED AT THE TIME OF FABRICA
13) HANDLE LEVER 765 58 221 C
Description : HANDLE LEVER 765 58 221 C()
Specification : HANDLE LEVER DRG. NO. 765-58-221/C
C
Estab
14) Hinge Driver Hatch Assembly forging
Description : Hinge Driver Hatch Assembly forging()
Specification : Hinge (Driver Hatch Assembly) forging
C
Estab
15) LOOM CLIP FOR ELECTRICAL FITMENT FOR MPV AS PER DRG NO HULL MPV 102
Description : LOOM CLIP FOR ELECTRICAL FITMENT FOR MPV AS PER DRG NO HULL MPV 102()
Specification : LOOM CLIP FOR ELECTRICAL FITMENT FOR MPV AS PER DRG NO HULL/MPV/102
1) BARREL COMPLETE 301139910 IN FINISHED CONDITION[71]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COWL(FAIRING) FOR AK- 630 GUN.[72]()
Specification : AS PER REQUIRED DRG.& SPECIFICATION
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) IMPACT PROTECTOR MUZZLE TO DRG.NO.304063075 (MODIFIED),PART NO.404031082 IN F/C[71]()
Specification : IMPACT PROTECTOR MUZZLE TO DRG.NO.304063075 (MODIFIED),PART NO.404031082 IN F/C
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Impact Protector Left to Drg No F1303-026871 for 84mm RL Mk-III[71]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SHOULDER PAD ASSY. TO DRG. NO. F1303-007200 F IN FINISHED CONDITION D.C. NO. 19047-W DT.02.05.07[71]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BIPOD ASSEMBLY (GUN MOUNT) COMPLETE TO DRG. F1303-028700 IN FINISHED CONDITION DC NO. 19047 W DT. 02.05.07[71]()
Specification : BIPOD ASSEMBLY (GUN MOUNT) COMPLETE TO DRG. F1303-028700 IN FINISHED CONDITION DC NO. 19047 W DT. 02.05.07
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) IMPACT PROTECTION RIGHT TO DRG. NO 304052778 DC NO-19311-W DATED 02.03.2013 WITH ACCESSORIES I E INCLUDING CLEANING SACHET, STRAP & DOUBLE SIDED ADHESIVE DRG, NO- F- 1303-028990-A[71]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CONV OF 44KG TUNGSTEN ALLOY SPHERES AS PER ARDE DRG 8603 03 02 01 01 004 02DB OR LATEST DRG AS ON TE DT INTO PREFORMED FRGMNTS WARHEAD EMPTY TO ARDE DRG 8603 03 02 01 00 000 00DF REV 3 12 09 12 OR LATEST AMND DRG
Description : CONV OF 44KG TUNGSTEN ALLOY SPHERES AS PER ARDE DRG 8603 03 02 01 01 004 02DB OR LATEST DRG AS ON TE DT INTO PREFORMED FRGMNTS WARHEAD EMPTY TO ARDE DRG 8603 03 02 01 00 000 00DF REV 3 12 09 12 OR LATEST AMND DRG()
Specification : CONV.OF 44KG TUNGSTEN ALLOY SPHERES ASPER ARDE DRG.8603 03 02 01 01 004 02DB OR LATEST DRG AS ON TE.DT.INTO PREFORMED FRGMNTS WARHEAD(EMPTY)TO ARDE DRG.8603 03 02 01 00 000 00DF REV-3,12-09-12 OR LATEST AMND.DRG.ASON T.E.DT.(MFG.Q.A.PAINT
R
Estab
2) RHE WARHEAD EMPTY TO ARDE DRG 8603 03 01 01 00 000 00DE REV 03 DT 12 09 12 OR LATEST AMND DRG AS ON TE DATE
Description : RHE WARHEAD EMPTY TO ARDE DRG 8603 03 01 01 00 000 00DE REV 03 DT 12 09 12 OR LATEST AMND DRG AS ON TE DATE()
3) CONVERSION OF MOTOR TUBE OF ARDE DRG NO 8603 02 01 04 00 001 00DF INTO MOTOR TUBE LINER ASSY TO ARDE DRG NO 8603 02 01 01 04 000 00DD DT 30 03 2012
Description : CONVERSION OF MOTOR TUBE OF ARDE DRG NO 8603 02 01 04 00 001 00DF INTO MOTOR TUBE LINER ASSY TO ARDE DRG NO 8603 02 01 01 04 000 00DD DT 30 03 2012()
Specification : CONVERSION OF MOTOR TUBE OF ARDE DRG.NO.8603 02 01 04 00 001 00DF INTO MOTOR TUBE(LINER ASSY)TO ARDE DRG.NO.8603 02 01 01 04 000 00DD DT.30/03/2012 [MFG.,QA/QC,IDENTIFICATION & PAINTNG AS PER SPECIFICATION NO.ARDE/SPECN./PINAKA/RKT-02,REV
R
Estab
4) FILAMENT WOUND/MOULDED FRP AND COMPOSITE PRODUCTS LIKE PINAKA LAUNCHER TUBE ASSEMBLY, CAPS & OTHER S
Description : FILAMENT WOUND/MOULDED FRP AND COMPOSITE PRODUCTS LIKE PINAKA LAUNCHER TUBE ASSEMBLY, CAPS & OTHER S()
Specification : AS PER DRG.
R
Estab
5) EXTENSION TUBE TO ARDE DRG NO 8603 03 02 01 00 003 00PA
Description : EXTENSION TUBE TO ARDE DRG NO 8603 03 02 01 00 003 00PA()
1) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Nonestab
2) STEERING PIPE RETURN LINE B2238210[90]()
Specification : STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE.
C
Nonestab
3) STEERING PIPE RETURN LINE B2238211[90]()
Specification : STEERING PIPE RETURN LINE BS3 STEERING PIPE RETURN LINE B2238211(B.1)BSIII STALLION VEH.
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification : OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET[62]()
Specification : MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET TO DRG.NO:155-1000(M)(UNIT LOAD) CONSISTING OF PALLET TO DRG.NO.155-1210(M), FRAME ASSEMBLY TO DRG.NO.155- 1230(M) DCNO.37126-A,DT.25.7.07.
C
Nonestab
2) BOX UNIT LOAD FOR 155MM SHELL M107[14]()
Specification : BOX UNIT LOAD FOR 155MM SHELL M107 TO DRG.NO. 3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002
C
Nonestab
3) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS[14]()
Specification : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO.ISV 587 A, DC.37127-A DT.30.07.07.
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C[14]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C[14]()
Specification : AS PER DRAWING
C
Nonestab
2) 0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION.[14]()
Specification : 0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION.
NOTE:- FIRM MAY GIVE ALT. OFFER OF THE BOX WITH STEEL LOCK(PLATED GOLDEN COLOUR) INSTEAD OF BRASS LOCK REMAINING OTHER PARAMETER UNCHANGED
E
Nonestab
3) BOX MARKED TO DRG. NO:F1303-032530B IN FINISHED CONDITION[71]()
Specification : BOX MARKED TO DRG. NO:F1303-032530B IN FINISHED CONDITION
C
Nonestab
4) BOX TRANSIT 3A TO DRG. NO. ICM 2240 (SHT. NO. 1 & 2) TO ICM 2245 TO DC(I) NO. 18700W DT.18.09.2002[71]()
Specification : BOX TRANSIT 3A TO DRG. NO. ICM 2240 (SHT. NO. 1 & 2) TO ICM 2245
P
Nonestab
5) BOX FOR GUN MOUNT AK-630 M WITHOUT AO-18. DRG, NO. AK-630M YA SB 200-1 TR & 200-14 TR[72]()
Specification : AS PER DRG. AND SPECN.
C
Nonestab
6) BOX WOOD IA TO DS CAT NO. 8115-000580 IN FINISHED CONDITION[70]()
Specification : BOX WOOD IA TO DS CAT NO. 8115-000580 IN FINISHED CONDITION
C
Nonestab
7) Packing Box Drg No CO 427 B[14]()
Specification : Packing Box Drg. No. CO-427
P
Nonestab
8) PACKING BOX TO DRG NO CO 385 A IN FINISH CONDITION[14]()
Specification : AS PER DRAWING
P
Nonestab
9) PACKING BOX TO DRG NO CO 525 ALONG WITH LOWER AND UPPER SEPARATOR AS PER DRG NO CO 526 IN FINISH CONDITION[14]()
Specification : AS PER DRAWING
C
Nonestab
10) PACKING BOX TO DRG. NO. CO-507 IN FINISHED CONDITION[14]()
Specification : AS PER DRAWING AND SPECIFICATION
P
Nonestab
11) PISTOL BOX FOR 0.32" MODIFIED PISTOL TO DRG. NO. CTM-0132 A IN F/C[14]()
Specification : AS EPR DRAWING
C
Nonestab
12) WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-445A F/C[14]()
Specification : AS PER DRAWING
C
Nonestab
13) WOODEN PACKING BOX TO DRG NO CO 515 IN FINISH CONDITION[71]()
Specification : AS PER DRAWING
C
Nonestab
14) WOODEN TRANSIT BOX DRG NO CO 483 B[14]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) POLYTHENE BAG
Description : POLYTHENE BAG()
Specification : POLYTHENE BAG SIZE:- 266.7 MM X 82.5 MM X 0.1 MM TH.
C
Estab
2) CONTAINER AS PER DRG NO M 9121 B
Description : CONTAINER AS PER DRG NO M 9121 B()
1) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo (modified).[21]()
Specification : FABRICATION OF JACKET COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED).
SWO PART II No.60234
SPECIFICATION No : OCFAV/Garment/001(b)
MAKE & SHAPE : AS PER APPROVED SAMPLE
NOTE:
A) CUT COMPONENTS & GARNITURE WILL BE SUPPLI
E
Nonestab
2) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo (modified).[21]()
Specification : FABRICATION OF TROUSER COMBAT PC DISRUPTIVE WITH INDIAN ARMY LOGO (MODIFIED).
SWO Pt II No.60233
SPECIFICATION No. OCFAV/Garment/002(b)
MAKE & SHAPE : AS PER APPROVED SAMPLE
NOTE:
A) CUT COMPONENTS & GARNITURE WILL BE SUPP
Specification : Concetrated Nitric Acid, Strength-98% As per IS 264:2005 (Specification of CNA Explosive Grade) All other parameters to be as per (IS 264:2005)
R
Nonestab
Category : s
Grade : Grade II
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) Sodium Bichromate (Technical)[10]()
Specification : IS : 249-1979 (Third Revision)
Packed in 50 Kg of Polythene Lined Bags
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) Barium Nitrate Grade-I[10]()
Specification : To Specn. : JSS : 6810-59-2016, Revision No. 4,
DC No. 5480-ME Dtd. 24-09-20016.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) Strontium Nitrate for Pyrotechnic Compo.[10]()
Specification : IS : 5671 of 1984.1st Rev. Amnd. No. 1, Reaffirmed 2011,
in the form of crystals without lumps, Particle Size :- Passing through 150 Micron I.S. sieve 100 BSS Min. 50% and retained on 63 Micron I.S. Sieve 240 BSS Min. 93%.
Packed in Pol
R
Nonestab
Category : p
Grade : Grade III
Size :
S
2697
NEXT GENERATION TECHNOLOGIES
PLOT NO 176, G2, SANJANA EMERALD ROAD NO 2 P AND T COLONY MEDIPALLY HYDERABAD Telangana
PIN1 : 500092
Phone No. : 27206659 GSTIN : 36AAKFN1918L1ZY
Specification : VIDEO PROCESSING BOARD DRG NO. 096701070400000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG/SPECN. AS APPENDIX-1 OF 0 TO 18 PAGES ( TOTAL 19 SHEETS)
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) POWER SUPPLY CUM CONTROL BOARD (L.F.9001121272)[90]()
Specification : POWER SUPPLY CUM CONTROL BOARD DRG.NO. 096701070300000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG./SPECN. AS PER APPENDIX-II OF 5 PAGES.
C
Estab
Category : p
Grade : Grade III
Size :
S
2698
AQURA TURN TECH
NO.81,RAJESHWARI LAYOUT BEGEPALLI POST,SIPCOT-1 HOSUR Tamil Nadu
PIN1 : 635126
Phone No. : 9789178833 GSTIN : 33AJWPM5521F1Z3
1) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR[70]()
Specification : AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL
C
Nonestab
2) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Nonestab
5) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
6) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
7) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
8) KEY[74]()
Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
9) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
2) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]()
Specification : AS PER OFT REQUIREMENTS
E
Nonestab
3) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Change Lever RH[70]()
Specification : As per Drawing
C
Nonestab
2) Change Lever LH[70]()
Specification : As per Drawing
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
2) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRAME BASKET WELD View AS PER DRG noY19388A 00 FOR MECH SRU ASSY OF SRCG[74]()
Specification : FRAME, BASKET, WELD (View) AS PER DRG.no.Y19388A-00. FOR MECH SRU ASSY OF SRCG.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material[70]()
Specification : Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
2699
Maa Chandra Chemical
53 Uptron state panki Side 1 Kanpur Panki Kanpur Uttar Pradesh
PIN1 : 208009
Phone No. : 9838775770 GSTIN : 09AATFM7014M1ZM
1) BRUSH AS PER DRG No K 9003 STAR WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9003* WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PULL THROUGH 1A NYLON AS PER DS CAT NO 1005 001760 FOR DC NO 22520 SA DATED 2 point 5 point 94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7point 62mm 1A1[70]()
Specification : AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1
E
Nonestab
2) PULLTHROUGH WEIGHT FOR 7POINT62MM RIFLE[70]()
Specification : AS PER DRG
E
Nonestab
Category :
Grade : Grade III
Size :
S
2700
JAI PARVATI FORGE LTD.
SCF 286, MOTOR MARKET, MANIMAJRA CHANDIGARH Chandigarh
PIN1 : 160101
Phone No. : 285100
1) FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB[42]()
Specification : FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
AS PER TERMS & CONDITIONS OF ANNEXURE 'A' ATTACHED
C
Nonestab
Category : dp
Grade : Grade II
Size :
L
1) Grey Iron Foundry
Name
Specification
Use
Status
1) FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310-A/FORGE AND TERMS & CONDITIONS ENCLOSED[66]()
Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB
AS PER GIF DRAWING NO. 5310-A/FORGE
