Specification : Fabric Nylon 300 GSM RIPSTOP PU COATED FLAME RETARDANT 152 CMS WIDE SPECN.IND/TC/0155 AND AS PER ANNX 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a) AS PER SPECIFICATION.
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric Nylon 220 GSM White Water and Oil repellent 100 cm[21]()
Specification : Fabric Nylon 220 GSM White Water and Oil repellent 100 cm. Specification No.IND/TC/0160 EXCEPT TEST PARAMETERS Water Vapour Transmission and Air permeability not to be tested.
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON 75 GSM WHITE PU COATED 152 CMS (MINIMUM)[21]()
Specification : IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AV
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Three Layer water proof breathable fabric Dual shade OG White 118 cm width[21]()
Specification : As per Appendix 'A' of Prov. Specification No. IND/TC/4587(d) and amendment No.1 As per CQA (T&C)/PMS/35 d except that fabric will be supplied roll form only as per CQA (T&C) Kanpur QAI No. CQA(T&C)/QAI/99 TC-11
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PU Coated Nylon Fabric in Camouflage Design 150 cm Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
2) Camouflage Cloth Commercial Polyester 600 D PVC PV Coated 150 CM Excluding Selvedges[21]()
Specification : AS PER ENCLOSED SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PU Coated Heat Sealable Nylon Fabric Black 150 cm Excluding Selvage[21]()
Specification : PROV/1201905/002(a)
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) 100 Percent Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm min[21]()
Specification : 100% Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm (min.)
Specn:- Appendix "A" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
Specification : 100% POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN.
APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER
R
Estab
3) 100 Percent Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm min[21]()
Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.)
Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON KNITTED ALUMINIZED COATED 100 CM MIN[21]()
Specification : Specification -IND/TC0161 As per relevant clause of specification
R
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]()
Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
R
Estab
2) FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE[21]()
Specification : FABRIC NYLON 75 GSM OG POLYURETHANE COATED 100 CM WIDE
SPECIFICATION:- APPENDIX 'A' V.NO. 2, AS MENTIONED IN SPECIFICATION NO. JSS:4240-03:2011 & AS PER ANNEXURE 'A'.
Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX
SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
R
Estab
4) OUTER AND INNER SHELL NYLON FABRIC INNER JACKET NYLON 60 GSM WIDTH 150 CM MIN PANTONE SHADE NO 19 0511 TPX[21]()
Specification : OUTER AND INNER SHELL NYLON FABRIC (INNER JACKET) NYLON 60 GSM WIDTH 150 CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX
SPECIFICATION :- AS PER APPENDIX 'E' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6
Specification : SPECN: CQA(A) 2346 (d) [DRG.NO ARDE 2222 DET 4 PT NO ITV 38A]
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) TAIL UNIT 11A FOR 81MM ILLG. MK-II[62]()
Specification : SPECN: CQA(A) 2346 (d) [DRG.NO ARDE 2222 DET 4 PT NO ITV 38A]
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) PROPELLER SHAFT LPTA 715, BS-3[90]()
Specification : PROPELLER SHAFT 6 ITEMS PT. NO. VFJ/18/08/00008. 1. ASSY PROPELLER SHAFT COMPLETE FRONT PT.NO.215441100112-QTY-1, 2.FRONT PT.NO.219841100101-QTY-1, 3.REAR PT. NO.219841100102 QTY-1, 4.BOLT PT.NO.257641113201D1 QTY-38, 5.NUT PT.NO.1205
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) PROPELLER SHAFT LPTA 715, BS-3[90]()
Specification : PROPELLER SHAFT 6 ITEMS PT. NO. VFJ/18/08/00008. 1. ASSY PROPELLER SHAFT COMPLETE FRONT PT.NO.215441100112-QTY-1, 2.FRONT PT.NO.219841100101-QTY-1, 3.REAR PT. NO.219841100102 QTY-1, 4.BOLT PT.NO.257641113201D1 QTY-38, 5.NUT PT.NO.1205
C
Nonestab
2) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Nonestab
3) STA JOINT FLANGE FINISH BS 3[90]()
Specification : STA JOINT FLANGE (FINISH) BS-III, MK-IV,F/XL PART NO. X1806122, STALLION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) LINK CARTG. METALLIC BELT 7.62MM M13[60]()
Specification : TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 &
TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004
(II) JSS : 0465-01-1994 (REVISION NO. 1)
NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG.
E
Nonestab
Category : ddp
Grade : Grade III
Size :
S
2463
Deep Dies & Tools
Saroop Chand Khera Near Rammanohar Lohia Law College Kanpur Road Lucknow Uttar Pradesh
PIN1 : 226012
Phone No. : 2436402 GSTIN : 09AADFD2636G1ZM
1) TIE ROD ASSY TO DRG NO BSH6366037 LF 7432111014[74]()
Specification : TIE ROD ASSY TO DRG NO BSH6366037 (LF 7432111014)
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) FRAME LF NO 7440201425[74]()
Specification : FRAME LF NO 7440201425
C
Nonestab
2) FRAME LF NO 7440201426[74]()
Specification : FRAME LF NO 7440201426
C
Nonestab
3) COVER LF NO 7440201430[74]()
Specification : COVER LF NO 7440201430
C
Nonestab
4) CHASSIS LF NO7440201446[74]()
Specification : CHASSIS LF NO7440201446
C
Nonestab
5) FRAME LF NO7440201451[74]()
Specification : FRAME LF NO7440201451
C
Nonestab
6) FRAME LF NO 7440201455[74]()
Specification : FRAME LF NO 7440201455
C
Nonestab
7) CHASIS LF NO 7440201456[74]()
Specification : CHASIS LF NO 7440201456
C
Nonestab
8) BODY LF NO 7440205827[74]()
Specification : BODY LF NO 7440205827
C
Nonestab
9) LEVER LF NO 7440205923[74]()
Specification : LEVER LF NO 7440205923
C
Nonestab
10) PLATE LF NO 7440801245[74]()
Specification : PLATE LF NO 7440801245
C
Nonestab
11) COVER LF NO 7446101138[74]()
Specification : COVER LF NO 7446101138
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR SLEEVE LF 9927098801[99]()
Specification : INVESTMENT CASTING FOR SLEEVE LF 9927098801
C
Nonestab
2) COVER LF 7431411001[74]()
Specification : COVER LF 7431411001
C
Nonestab
3) CONNECTING ROD LF 7440205910[74]()
Specification : CONNECTING ROD LF 7440205910
C
Nonestab
4) CONNECTING ROD LF 7440205911[74]()
Specification : CONNECTING ROD LF 7440205911
C
Nonestab
5) BODY LF 7440206798[74]()
Specification : BODY LF 7440206798
C
Nonestab
6) PLUG LF 7441120925[74]()
Specification : PLUG LF 7441120925
C
Nonestab
7) BODY LF 7432311060[74]()
Specification : BODY LF 7432311060
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) BODY LF NO 7420211077[74]()
Specification : BODY LF NO 7420211077
C
Nonestab
2) BODY LF NO 7420211078[74]()
Specification : BODY LF NO 7420211078
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) JOURNAL LF NO 7420211021[74]()
Specification : JOURNAL LF NO 7420211021
C
Nonestab
2) PLATE LF NO 7432411050[74]()
Specification : PLATE LF NO 7432411050
C
Nonestab
3) FLANGE LF NO 7432511054[74]()
Specification : FLANGE LF NO 7432511054
C
Nonestab
4) LEVER LF NO 7440205772[74]()
Specification : LEVER LF NO 7440205772
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
2) REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL[70]()
Specification : REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) SAND CASTING FOR BODY LF 9927069535[99]()
Specification : SAND CASTING FOR BODY TO DRG NO B-23/SC/7427436/237 M1 (LF 9927069535)
C
Nonestab
2) SAND CASTING FOR COMP Y6213326 LF 9927098023[99]()
Specification : SAND CASTING FOR COMP Y6213326 LF 9927098023
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)[74]()
Specification : BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)[74]()
Specification : ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) COVER ASSY AS PER DRG NO AL6179264 (LF 7440201645)[74]()
Specification : COVER ASSY AS PER DRG NO AL6179264 (LF 7440201645)
C
Estab
2) CAP AS PE DRG NO AL6430468 (LF 7440201646)[74]()
Specification : CAP AS PE DRG NO AL6430468 (LF 7440201646)
C
Estab
3) COVER DRG NO IUMK301152.001 (LF 7440201693)[74]()
Specification : COVER DRG NO IUMK301152.001 (LF 7440201693)
C
Estab
4) COVER FOR BPV29000 TO DRG NO BPV29105 (LF 7440901417)[74]()
Specification : COVER FOR BPV29000 TO DRG NO BPV29105 (LF 7440901417)
C
Estab
5) SETTING PIECEFOR BPV29000 TO DRG NO BPV29115 (LF 7440901421)[74]()
Specification : SETTING PIECEFOR BPV29000 TO DRG NO BPV29115 (LF 7440901421)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) FLANGE TO DRG NO BL8230197 (LF 7420111054)[74]()
Specification : FLANGE TO DRG NO BL8230197 (LF 7420111054)
C
Estab
2) WASHER TO DRG NO AL8942046 (LF 7420211067)[74]()
Specification : WASHER TO DRG NO AL8942046 (LF 7420211067)
C
Estab
3) SCREW TO DRG NO OLF/R&D/TVNE-4B&1PA/114 WITHOUT ELECTROPLATING/COATING (LF 7420411019)[74]()
Specification : SCREW TO DRG NO OLF/R&D/TVNE-4B&1PA/114 WITHOUT ELECTROPLATING/COATING (LF 7420411019)
C
Estab
4) FLANGE TO DRG NO OLF/R&D/BPK-2/211 M2 (LF 7432111043)[74]()
Specification : FLANGE TO DRG NO OLF/R&D/BPK-2/211 M2 (LF 7432111043)
C
Estab
5) WASHER TO DRG NO Y-2546326-01 (LF 7432312024)[74]()
Specification : WASHER TO DRG NO Y-2546326-01 (LF 7432312024)
C
Estab
6) MOUNT TO DRG NO AF8637806 (LF 7432412037)[74]()
Specification : MOUNT TO DRG NO AF8637806 (LF 7432412037)
C
Estab
7) MOUNT TO DRG NO AF8638134 (LF 7432412041)[74]()
Specification : MOUNT TO DRG NO AF8638134 (LF 7432412041)
C
Estab
8) SCREW TO DRG NO AL8914221-03 (LF 7440201880)[74]()
Specification : SCREW TO DRG NO AL8914221-03 (LF 7440201880)
C
Estab
9) SCREW TO DRG NO AL8914221-03 FOR VISOR (LF7440202701)[74]()
Specification : SCREW TO DRG NO AL8914221-03 FOR VISOR (LF7440202701)
C
Estab
10) SCREW TO DRG NO AU8900044 (LF 9000090897)[90]()
Specification : SCREW TO DRG NO AU8900044 (LF 9000090897)
C
Estab
11) SPRING WASHER TO DRG NO AL8387003 (LF 9002081334)[90]()
Specification : SPRING WASHER TO DRG NO AL8387003 (LF 9002081334)
C
Estab
12) WASHER TO DRG NO AF8942297-12 WITHOUT ELECTROPLATING/COATING (LF 9004080912)[90]()
Specification : WASHER TO DRG NO AF8942297-12 WITHOUT ELECTROPLATING/COATING (LF 9004080912)
C
Estab
13) SCREW TO DRG NO AF8909032 WITHOUT ELECTROPLATING/COATING (LF 9004080940)[90]()
Specification : SCREW TO DRG NO AF8909032 WITHOUT ELECTROPLATING/COATING (LF 9004080940)
C
Estab
14) WASHER TO DRG NO AF8942297 WITHOUT ELECTROPLATING/COATING (LF 9004081345)[90]()
Specification : WASHER TO DRG NO AF8942297 WITHOUT ELECTROPLATING/COATING (LF 9004081345)
C
Estab
15) SCREW TO DRG NO Y-7501394 (LF 9023091154)[90]()
Specification : SCREW TO DRG NO Y-7501394 (LF 9023091154)
C
Estab
16) WASHER TO DRG NO AF8942297-11 WITHOUT ELECTROPLATING/COATING (LF 9927062441)[99]()
Specification : WASHER TO DRG NO AF8942297-11 WITHOUT ELECTROPLATING/COATING (LF 9927062441)
C
Estab
17) EXPANSION WASHER TO DRG NO B7546110 (LF 9927088797)[99]()
Specification : EXPANSION WASHER TO DRG NO B7546110 (LF 9927088797)
C
Estab
18) WASHER TO DRG NO Y-7641738 (LF 9927090232)[99]()
Specification : WASHER TO DRG NO Y-7641738 (LF 9927090232)
C
Estab
19) WASHER TO DRG NO Y-7642819 (LF 9927090235)[99]()
Specification : WASHER TO DRG NO Y-7642819 (LF 9927090235)
C
Estab
20) FLANGE TO DRG NO BSH8230121 (LF 9927090404)[99]()
Specification : FLANGE TO DRG NO BSH8230121 (LF 9927090404)
C
Estab
21) SCREW TO DRG NO AF8914130-02 (LF 9927091244)[99]()
Specification : SCREW TO DRG NO AF8914130-02 (LF 9927091244)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) LEVER AS PER DRG NO BL9.185.895 FOR PNK-4S (LF 7440205914)[74]()
Specification : LEVER AS PER DRG NO BL9.185.895 FOR PNK-4S (LF 7440205914)
C
Estab
2) LEVER AS PER DRG NO BL9.185.894 FOR PNK-4S (LF 7440205915)[74]()
Specification : LEVER AS PER DRG NO BL9.185.894 FOR PNK-4S (LF 7440205915)
C
Estab
3) BODY AS PER DRG NO BL8021688 FOR PNK-4S (LF 7440205927)[74]()
Specification : BODY AS PER DRG NO BL8021688 FOR PNK-4S (LF 7440205927)
C
Estab
4) COVER AS PER DRG NO NO BL8040782 FOR PNK4S (LF 7440205928)[74]()
Specification : COVER AS PER DRG NO NO BL8040782 FOR PNK4S (LF 7440205928)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) BRACKET AS PER DRG NO BL8.095.524 (LF 7440205930)[74]()
Specification : BRACKET AS PER DRG NO BL8.095.524 (LF 7440205930)
C
Estab
2) COVER AS PER DRG NO 71940300021 (LF 7440205936)[74]()
Specification : COVER AS PER DRG NO 71940300021 (LF 7440205936)
C
Estab
3) COVER AS PER DRG NO 71940300031 (LF 7440205937)[74]()
Specification : COVER AS PER DRG NO 71940300031 (LF 7440205937)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)[74]()
Specification : BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)
C
Estab
2) COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)[74]()
Specification : COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)
C
Estab
3) GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)[74]()
Specification : GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)
C
Estab
4) COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)[74]()
Specification : COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)
C
Estab
5) GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)[74]()
Specification : GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)
C
Estab
6) LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)[74]()
Specification : LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)[74]()
Specification : GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)
C
Estab
2) GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)[74]()
Specification : GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)
C
Estab
3) BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)[74]()
Specification : BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)
C
Estab
4) COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)[74]()
Specification : COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)
C
Estab
5) COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)[74]()
Specification : COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)
C
Estab
6) LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)[74]()
Specification : LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)
C
Estab
7) DISK LF NO 7440200277[74]()
Specification : DISK LF NO 7440200277
C
Estab
8) SLEEVE LF NO 7440200283[74]()
Specification : SLEEVE LF NO 7440200283
C
Estab
9) CASING LF NO 7440200285[74]()
Specification : CASING LF NO 7440200285
C
Estab
10) CASING LF NO 7440200286[74]()
Specification : CASING LF NO 7440200286
C
Estab
11) BODY LF NO 7440206201[74]()
Specification : BODY LF NO 7440206201
C
Estab
12) COVER LF NO 7440206202[74]()
Specification : COVER LF NO 7440206202
C
Estab
Category : p
Grade : Grade II
Size :
S
2464
SREE MAA TECHNO ENTERPRISE
88/2, BANERJEE PARA LANE KOLKATA-700031 BANERJEE PARA LANE KOLKATA West Bengal
PIN1 : 700031
Phone No. : 9836674059 GSTIN : 19AFYPC2778Q1ZA
1) PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016[62]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BUSH TO SK NO OTF DD 013 IN FC[62]()
Specification : AS PER DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) NUT TO DET NO 2 16 OF DRG NO 3 024045 IN FC TO SK NO OTF DD 006[64]()
Specification : NUT TO DET NO 2-16 OF DRG NO 3-024045 IN FINISH CONDITION TO SK NO OTF/DD/006
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BODY SUB ASSY DET Cd 3 TO DRG NO 3 022859 TO SK NO OTF SE 010 IN F C[62]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) NYLON MOULDED POLE IN F/C TO DRG. NO. QX-1743 DC(I) NO. 36123-A DT.06/06/96[63]()
Specification : AS PER DRG & SPECIFICATION
C
Nonestab
2) SLEEVE TO SK NO OTF PG 006[62]()
Specification : AS PER DRG.
C
Nonestab
3) TRANSIT PLUG AS PER SK NO M 7949[62]()
Specification : AS PER DRG.
C
Nonestab
4) MACHINING AND PROCESSING OF CONTACT CAP TO DET NO 7 OF DRG NO 3 022859 IN FC OTF SE 005[91]()
Specification : MACHINING AND PROCESSING OF CONTACT CAP TO DET. NO.7 OF DRG.NO.3-022859 IN F/C (TO SK NO. OTF/SE/005)
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CAP DET NO 21 TO SK NO OTF DD 001 IN FC[62]()
Specification : AS PER DRG.
C
Nonestab
2) NUT IN FC TO SK NO OTF PG 003[64]()
Specification : AS PER DRG
C
Nonestab
3) CAP TO SK NO OTF PG 002 IN FC[62]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) O RING 67point5 X 2point4 lf 2013436145
Description : O RING 67point5 X 2point4 lf 2013436145()
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
R
Nonestab
Category : p
Grade : 3
Size :
S
2465
Patodia Forgings and Gears Limited
Gat No:150/2, Mahalunge, Chakan-Talegaon Road, Pune Chakan-Talegaon Road PUNE Maharashtra
PIN1 : 410501
Phone No. : 9325249301 GSTIN : 27AAECP9266C1Z9
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
1) FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)[04]()
Specification : FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)
R
Estab
2) FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY WITH A CERTIF[04]()
Specification : FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY W
R
Nonestab
3) FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,][04]()
Specification : FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,]
R
Estab
4) FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE SUPPLYING MA[04]()
Specification : FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE
R
Nonestab
5) FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVERSIZE: 10% M[04]()
Specification : FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVE
R
Estab
6) FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%Max,Over size[04]()
Specification : FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%M
R
Nonestab
Category : P
Grade : II
Size :
2467
VARIETY TIMBER MART
73 A SANT SAVTA MARG MUSTAFA BAZAR BYCULLA EAST SANTSAVTA MARG MUMBAI Maharashtra
PIN1 : 400010
Phone No. : 23725285 GSTIN : 27AAAFV3079L1ZR
1) TIMBER OF ANY SPICES 20X170X1000MM LF 2255541041[22]()
Specification : TIMBER OF ANY SPICES 20X170X1000MM
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270463342 PLY WOOD 6 MM[22]()
Specification : IS-303 - 1989
R
Nonestab
2) 2270441354 PLY WOOD 3 MM[22]()
Specification : IS:303-1989
R
Nonestab
3) 2270463030 PLY WOOD 4 MM[22]()
Specification : IS:303 -1989
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270528358 PLY WOOD 8 MM[22]()
Specification : IS: 303-1989
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270353012 PLY WOOD 3 MM BWR BB[22]()
Specification : PLYWOOD TYPE BB BWR GRADE TO SPECN. IS: 303 - 1989,SUPPLEMENTARY SCHEDULE CIGS/SS/37 (C) WITH AMENDMENT NO 1 TO 4 CATALOGUE NO H3/5530 - 000036,SIZE:- 1.20 M X 1.20 M X 3 MM -3 PLY
R
Nonestab
2) 2270460637 PLY WOOD 12 MM MR AA[22]()
Specification : PLY WOOD GENERAL PURPOSE TO GRADE MR TYPE AA TO SPECN.IS:303-1989 WITH AMENDMENT NO.2,SIZE - 1.20 M X 1.20 M X 12 MM TH.9 PLY.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270528353 PLYWOOD TYPE GRADE MR AB TO SPECN IS 303 1989 RA 2018 SIZE2400MM 1200MM 08MM THICK 5 PLY[22]()
Specification : PLYWOOD TYPE GRADE MR/AB TO SPECN: IS:303-1989(RA 2018)SIZE2400MM X 1200MM X 8MM THICK (5 PLY)
C
Nonestab
2) 2270403355 PLYWOOD 6 MM THICK SIZE 2400 MM 1200 MM GRADE BWR APPEARANCE CLASS[22]()
Specification : PLYWOOD 6 MM THICK, SIZE 2400 MM X 1200 MM, GRADE- BWR, APPEARANCE CLASS-AB STANDARD IS:303-1989 (RA-2018)NUMBER OF PLY : 5 PLY
C
Nonestab
3) 2270441355 PLYWOOD 3 MM THICK SIZE 2400 MM 1200 MM GRADE MR APPEARANCE[22]()
Specification : PLYWOOD 3 MM THICK, SIZE 2400 MM X 1200 MM, GRADE – MR, APPEARANCE CLASS-BB, STANDARD IS:303-1989 (RA 2018)NUMBER OF PLY : 3 PLY
1) REELS CABLE STEEL 406.5 MM FLANGE DIA TO IR, ISM3973 INSIDE TRAVERSE 127.00 MM OD CORE (CAT NO. Y-3/IYC-0819) REF. NO. IRES/M/3973 (METRIC GAUGE REF. NO. ILE (G) – 4 METRIC RS/PROV. 1986-3 (A) (M) (WITHOUT SIX HOLES)[70]()
1) REELS CABLE STEEL 406.5 MM FLANGE DIA TO IR, ISM3973 INSIDE TRAVERSE 127.00 MM OD CORE (CAT NO. Y-3/IYC-0819) REF. NO. IRES/M/3973 (METRIC GAUGE REF. NO. ILE (G) – 4 METRIC RS/PROV. 1986-3 (A) (M) (WITHOUT SIX HOLES)[70]()
1) SPRING EXTRACTOR TO DRG No 29P 0019STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle
C
Nonestab
2) SPRING MAIN TO DRG No 29P 0015 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle
C
Nonestab
3) SPRING SCREW BAND INNER TO DRG NO 29P 0061STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG NO.29P 0061* required for 0.315" Sporting Rifle
C
Nonestab
4) SPRING LEAF BED BACK SIGHT TO DRG NO 29P 0008 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle
C
Nonestab
5) SCREW SPRING BAND BACK SIGHT TO DRG NO 29P 0009 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0009 required for 0.315" Sporting Rifle
C
Nonestab
6) WASHER SPRING BAND INNER TO DRG NO 29P 0067STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0067* required for 0.315" Sporting Rifle
C
Nonestab
7) WASHER SPRING BOLT LOCKING TO DRG NO 29P 0068STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0068* required for 0.315" Sporting Rifle
C
Nonestab
8) BOLT STOCK WITH WASHERS AS ONE SET CONSISTING BOLT STOCK TO DR NO 29P 0043STAR SP 43 10 NOS WASHER BOLT STOCK TO DRG NO 29P 0066 SP 66 11 NOS WASHER SPRING BOLT STOCK TO DRG NO 29P 0069 SP69 11 NOS required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG
C
Nonestab
9) COMPLETE MAGAZINE ASSEMBLY TO DRG NO 29 P 0411STAR CONSISTING OF CASE MAGAZINE SUB ASSEMBLY 29 P 0460 SPRING PLOTFORM AND RETAINER SUB ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG
C
Nonestab
10) Manufacturing and Supply of Spring Hammer Trigger as per DRG No K 2063 FOR TAR[70]()
Specification : Manufacturing and Supply of Spring Hammer Trigger as per DRG No K 2063 FOR TAR
C
Nonestab
11) MANUFACTURING AND SUPPLY OF SPRING EXTRACTOR AS PER DRG No K 2013 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No. K- 2013*
C
Nonestab
12) Rod Assembly Driving Spring of M2HB Gun[74]()
Specification : Rod Assembly, Driving Spring, OOW50BMG as per Drawing No. 5564305 of M2HB Gun
C
Nonestab
13) Spring Helical Compression OOW50BMG as per Drawing No 7313068 of M2HB Gun[74]()
Specification : Spring, Helical Compression, OOW50BMG as per Drawing No. 7313068 of M2HB Gun
C
Nonestab
14) Spring Locking Barrel OOW50BMG as per Drawing No 7266134 of M2HB Gun[74]()
Specification : Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun
C
Nonestab
15) SPRING FLAT[74]()
Specification : SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
16) SCREW SPRING INTERFACE[74]()
Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
17) MANUFACTURING AND SUPPLY OF SET OF 11 TYPES OF SPRINGS OF TAR AS PER DRG No K2032 K2066 K2063 K1208 K1034 K2024 K4005 K4013 K1112 K2068 K2013[70]()
Specification : MANUFACTURING AND SUPPLY OF SET OF 11 TYPES OF SPRINGS OF TAR AS PER DRG No K2032 K2066 K2063 K1208 K1034 K2024 K4005 K4013 K1112 K2068 K2013
C
Nonestab
18) ADAPTOR SPRING[74]()
Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG
C
Nonestab
19) PLUG SPRING[74]()
Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) MODIFIED COIL SPRING[2110005001]()
Specification : SPECN-ADRDE/271(b)
NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
Specification : SPECN-ADRDE/271(b)
NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) MODIFIED COIL SPRING[2110005001]()
Specification : SPECN-ADRDE/271(b)
NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) COIL SPRING WITH CONE B P MIRAGE[2110060004]()
Specification : DRAWING NO:ADRDE/305(b).
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) ASSEMBLY COIL SPRING[2110019025]()
Specification : Drg. No. 1.3.01-02-01(b) except Mn% as per BS: 1408-M:1954 i.e. 0.25-0.75%
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) COIL SPRING I CODE 2110025024[2110025024]()
Specification : DRNG. NO.ADRDE/1402-03-002
R
Nonestab
2) Sub Assy of Spring for Auxiliary Spring PTAR Parachute[2110080016]()
Specification : CQA(GS)/US/563
R
Nonestab
3) SNAP FASTNER (4 PIECES) SPRING TYPE SIZE-7/7 WITH ONE PLASTIC WASHER[2111654009]()
Specification : IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality
R
Nonestab
4) BALL TYPE SPRING PSM SERIES[2101787006]()
Specification : ADRDE/1332(b)
R
Nonestab
5) METAL COMPONENT SPRING[2110080001]()
Specification : SPECN-ADRDE/1.6.01.01.02-02
R
Nonestab
6) COIL SPRING BP SU 30[2110025030]()
Specification : ADRDE/1402-03-002(a)
R
Nonestab
7) MODIFIED COIL SPRING for BP Mig 21[2110005017]()
Specification : ADRDE/271(c) NOTE – FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
R
Nonestab
8) EJECTOR SPRING[2110075037]()
Specification : ADRDE/1197-A3/SA-2(c)
R
Nonestab
9) Coil Spring for BP Hawk[2110025029]()
Specification : 1.3.03-01-01(b)
R
Nonestab
10) Coil Spring BP SU30[2110025072]()
Specification : ADRDE/1402-03-002 (a) Except that:-
(i) Wire Dia=3.4+-0.1 mm
(ii) Permanent set upto 3 mm.
(iii) Length of coil spring= 360 +-8 mm.
R
Nonestab
11) Conical Spring Dia 220 M[2110025051]()
Specification : MISC/RP/ADC-150/CSS/01
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER SPRING TBRL LF NO 9911358297
Description : SHUTTER SPRING TBRL LF NO 9911358297()
Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1
R
Nonestab
Category : p
Grade : 3
Size :
S
2475
Panna Marketing (P) Ltd., (Sole Selling Agent of M/s Bhawani Structures, Kanpur)
66,Uptron Estate Panki Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 0000000000 GSTIN : 09AERPG2973H1Z2
1) POLYESTER WADDING HOLLOW SILCONIZED 350 GSM IN 91 CM[21]()
Specification : AS PER APPENDIX "A" ATTACHED TO PROV. SPECN. S/6252/A/TC-6
R
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) THERMAL BONDED BATTING POLYESTER 100 GSM 150 CM WIDTH[21]()
Specification : AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11
R
Nonestab
Category : dp
Grade : Grade II
Size :
L
2478
MAHAVIR SPINFAB PRIVATE LIMITED
G-16, 59/132-A, OLD DAL MANDI,NAYAGANJ,KANPUR,INDIA OLD DAL MANDI KANPUR Uttar Pradesh
PIN1 : 208001
Phone No. : 2833405 GSTIN : 09AAACM9334L1Z2