List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2341 ABHINAV YANTRIK UDYOG PVT. LTD.
10, RAJA SUBODH MULLICK SQUARE RAJA SUBODH MULLICK SQUARE KOLKATA West Bengal
PIN1 : 700013
Phone No. : 25644296
GSTIN : 19AAECA6904G1ZQ 		CALA17996B

Download 		1Ordnance Factory Bolangir

Name Specification Use Status
1) DISC FOR FUZE 162 MARK-8 & DA5A TO CQA[63]() Specification : DISC FOR FUZE 162 MARK-8 & DA5A TO CQA(A)/AMMN/3042 DET.3 PART NO.ISV-2018.DC-36449-A Dt.30-07-98. C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Bolangir

Name Specification Use Status
1) PLUG REPRESENTING FUZE B 429B TO DRG.NO:CQA[63]() Specification : DRG.NO:CQA(A)/AMN/1669 PART NO:ISX-266,DC NO-35494-A, DT. 29.04.93 C Nonestab
2) FUZE DA5A (EMPTY) FOR 51MM MORTAR BOMB[65]() Specification : IQX 79 GE TO DC 37263-A DT.26.08.2010. C Nonestab
3) BODY TO DRG.NO.9-04367/9- -104/ 38.300.150[63]() Specification : .DRG.NO.9-04367/9- -104/38.300.150,DC NO.36396-A DT-21.03.98. C Nonestab
4) KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A[61]() Specification : DESIGNERS REFERENCE NO. CIA/AMN/2208,DRG PART NO.IUX 144A,DC NO. 35916-A DATED:21.02.95 TO SPECIFICATION CQA(A) 1817(t) DC 37096-A DATED: 06.03.2007 C Nonestab
5) ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985[63]() Specification : DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A,DT.04.06.1985. SPECIAL REQUIREMENT: RESISTANCE ACROSS THE POINTS OF Pt-Ir WIRE SHOULD BE 1.4 TO 1.8 OMHS. C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) PLUG REPRESENTING FUZE DA5A[63]() Specification : DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285 C Nonestab
2) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO. AFK/SK-215-05[60]() Specification : DRG.NO.AFK/SK-215-05. dt. 13.09.2011 C Nonestab
3) PLUG FIRING REPRESENTING FUZE YDB-60 TO DRG. NO. NAI(P)SKETCH 360[60]() Specification : NAI(P) SKETCH 360 DATED 22/11/2012 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) SMOKE COMP.CASING DRG.NO.KF/PJ/SK12[60]() Specification : CQA[A] SEALED DRG NO 04-749- 130222-05.1E C Nonestab
2) SWITCH NO. 4 PULL MK-1/L EMPTY ASSLY.[64]() Specification : DRG. NO. DD(L) 15250 C Nonestab
3) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
4) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) HOUSING DELAY SHT 2 SPECN CIA-1804[61]() Specification : CQA(A)1804 C Nonestab
2) WRENCH FUZING MINE APM 16 A1[42]() Specification : CQA(A)1804 C Nonestab
3) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
4) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]() Specification : CQA(A) 2351 C Nonestab
5) FIRING PIN TO CQA DRG 04-749-13022[60]() Specification : CQA[A] SEALED DRG NO.04-749-130222-03.2E C Nonestab
6) RETAINING PIN & RING DET 6 PT ITW-10[61]() Specification : CQA(A) 1504 C Nonestab
7) FUZE MINE COMB.M605 ASSEMBLY EMPTY[63]() Specification : CQA(A) 1803 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE (EMPTY) FOR ROUND 40 MM MGL[60]() Specification : R Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE PERCUSSION D A NO 5 A EMPTY[63]() Specification : CQA(A) 0922 C Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]() Specification : I.A. 1204 C Nonestab
3) FUZE PERCN DA NO162MK 8 M2 WITH CAP[63]() Specification : CQA(A) 0917 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7[60]() Specification : CQA(A) 2324 C Nonestab
Category : p
Grade : Grade III
Size : S
1Metal and Steel Factory

Name Specification Use Status
1) MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED.[94]() Specification : MANUFACTURE OF NOSE ADAPTER TO DRG.REGD NO.17244/1 PART NO TV 44 FROM STEEL ROUND OF 50 MM(+3MM) WITHOUT SURFACE TREATMENT. AS PER SCOPE OF WORK ATTACHED. C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle[03]() Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle C Nonestab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918 Description : AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918() Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294. R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]() Specification : SPECN. NO. CQA(A) 0917 C Nonestab
2) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]() Specification : SPECN.NO. CQA(A) 0917 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]() Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6380608100 PRIMER 19B EMPT IQX 71 GE[63]() Specification : SPECN.NO.CIA 3102 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) IGNITER CASING DRG NO KF PJ SK 5 Description : IGNITER CASING DRG NO KF PJ SK 5() Specification : CQA(A) SEALED DRG NO 04-749-130222-03.1E R Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
3) PISTON GAS FOR SMALL ARMS Description : PISTON GAS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
4) BLOCK FIXING Drg. No AKC-01/5 Description : BLOCK FIXING Drg. No AKC-01/5() Specification : AS PER DRG C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. Description : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.() Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07. C Estab
3) PISTON GAS FOR SMALL ARMS Description : PISTON GAS FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
4) BLOCK FIXING Drg. No AKC-01/5 Description : BLOCK FIXING Drg. No AKC-01/5() Specification : AS PER DRG C Estab
Category : p
Grade : 3
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SMOKE COMP.CASING DRG.NO.KF/PJ/SK12() Specification : CQA[A] SEALED DRG NO 04-749- 130222-05.1E R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) NOSE ADAPTER TO CQA[00]() Specification : as per Drawing C Estab
Category : p
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) FRONT TOE PIN ASSY[90]() Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1 C Estab
Category : p
Grade : Grade III
Size : S
2342 VIJAY ENGINEERING WORKS
H.NO:7-8-208/3,gouthamnagar, ferozguda hyderabad Telangana
PIN1 : 500011
Phone No. : 65504617
GSTIN : 36ACGPG2989J1Z7 		HYDA08305D

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325[70]() Specification : INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) CONVERSION OF BOLT BREECH FROM FORGING TO DRGNO 29P 0013STAR M required for 0POINT0315 Sporting Rifle[00]() Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle C Nonestab
2) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle C Nonestab
3) CARRIER BREECH BLOCK TO DS CAT NO 1005 001578 TO DC NO 26762 SA DATED 11 06 2015 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1268[70]() Specification : AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268) C Nonestab
4) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]() Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001 K 5001 K 6001 AS PER DRG NO TEND 2449 WITH OFT RAW MATERIAL[00]() Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL C Nonestab
2) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL C Nonestab
3) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL C Nonestab
4) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL[70]() Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001 AS PER DRG NO TEND 2449STR2 WITH OFT RAW MATERIAL[70]() Specification : AS PER DRG NO.TEND 2449*2 WITH OFT RAW MATERIAL C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) FINISHED BODY (BLACK) FOR TEAR GAS GUN FROM TRADE SOURCES TGG-201 (LT. DC-09/010/13 DT. 16.01.14)[70]() Specification : FINISHED BODY (BLACK) FOR TEAR GAS GUN FROM TRADE SOURCES TGG-201 (LT. DC-09/010/13 DT. 16.01.14) C Nonestab
2) BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN.[70]() Specification : IS:4368-1967 Gd-13. Ni3 Cr80 CASE HARDNESS:-500-550 VPN CASE DEPTH:-0.6 TO 1mm C Nonestab
Category : p
Grade : Grade II
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) EXTRACTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS[70]() Specification : EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN C Nonestab
2) SLIDE FINISH FOR 9MM AUTO PISTOL[70]() Specification : SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A. C Nonestab
3) BODY FOR 0.22" SPORTING RIFLE [70]() Specification : BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST C Nonestab
Category : p
Grade : Grade II
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) SLIDE FINISH (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32[70]() Specification : SLIDE FINISH TO DRG. NO. PS32-201 (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32" PISTOL. C Nonestab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SEMI- FINISHED BLANK TO DRG. NO. TEND 2529 (OFT MATERIAL) REQD.FOR MSL CYLINDER TO DRG. NO. 33P 2011.[70]() Specification : AS PER DRAWING AND SPECIFICATION C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) 3.FRAME TRIGGER 1005-06602[70]() Specification : AS PER DRG. C Nonestab
Category : p
Grade : Grade I
Size : S
1Small Arms Factory

Name Specification Use Status
1) Blank for Piston extension stage VI[01]() Specification : Blank for Piston Extension stage VI to Drg. No. SK JVPC730 for JVPC 5.56 MM C Nonestab
Category : p
Grade : Grade I
Size : S
1Small Arms Factory

Name Specification Use Status
1) Plunger Wheel lock for JVPC[70]() Specification : Plunger Wheel Lock Drg. No. 0204 03 02 02 18 006 OODF for JVPC 5.56MM(MIMRoute) C Nonestab
Category : p
Grade : Grade I
Size : S
1Small Arms Factory

Name Specification Use Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[70]() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Nonestab
Category : p
Grade : Grade I
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) LEG LEFT ASSY TO DS CAT NO 1015 001548 FOR MOUNTING ASSY OF 81MM MORTAR IN FC[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
2343 BIHANI UDYOG
303A, JAIPUR TOWER, M.I.ROAD JAIPUR Rajasthan
PIN1 : 302001
Phone No. : 2367662
GSTIN : 08AADFB3021H1ZZ 		CALB05865G

Download 		1Ordnance Factory Khamaria

[ENR Registration] Debarred
Name Specification Use Status
1) BOX 520 9 EMPTY ASSY DRG TRD 222169 LF 9911357802 Description : BOX 520 9 EMPTY ASSY DRG TRD 222169 LF 9911357802() Specification : BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169. R Estab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TWIN CONTAINER 520 9 DRG TRD 422155 LF 9911357801 Description : TWIN CONTAINER 520 9 DRG TRD 422155 LF 9911357801() Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155. C Estab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) CARRIER AMMN 17A FOR 81MM ILLG. MK-II[62]() Specification : DRG.NO ARDE 2224 PT NO ISV 551A SHEET NO.3 SPECN. NO. CQA(A) 2804 (M) C Estab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CARRIER AMMUNITION 10 C , DESIGNER'S REF CIA/AMN/2317 PART NO.ISV 495A,SPECN CQA(A)2804[65]() Specification : CQA(A)2804 C Estab
Category : p
Grade : Grade II
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) AMMUNITION CONTAINER 69 A/L PLASTIC TO DRG NO ARDE 2125,DET NO 3, PART NO ISV 533 A, SPECN NO CQA(A)2804[65]() Specification : CQA(A)2804 C Estab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) TWIN CONTAINER 520:9 DRG TRD 422155[99]() Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155. C Estab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) CARRIER 11A ISV-468A FOR HE&ILLU[65]() Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR C Estab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) carrier 12 A[65]() Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F C Estab
Category : p
Grade : Grade III
Size : S
2344 TYAGI ENTERPRISES
GALI NO 1 PLOT NO 2 BANWARI NAGAR OPP SRI RAM PISTON COMPANY MEERUT ROAD GHAZIABAD Uttar Pradesh
PIN1 : 201003
Phone No. : 2712385
GSTIN : 09AACFT2157P1ZO 		MRTT00054F

Download 		1Ordnance Factory Muradnagar

Name Specification Use Status
1) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]() Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T C Nonestab
2) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]() Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N C Nonestab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6261102300 ADAPTER DRG PT SX 701 FOR 105MM TKS[62]() Specification : ADAPTER TO DRG PT NO SX-701 DC 35779-A C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]() Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) GRENADE BODY BLANK TO GSF DRG NO M 11220[62]() Specification : AS PER DRAWING R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Nonestab
2) THRUSTER PLATE FORGING 1000 LBS (6220200120)[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. C Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT " C Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]() Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]() Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
7) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
8) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
9) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
10) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
11) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
12) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
13) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
14) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Nonestab
15) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
16) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Nonestab
17) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
18) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
19) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
20) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
21) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
22) PLUG A/C 34 1000 LBS (6220501010)[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
23) PLUG FASTENING 250 KG (6241101124)[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
24) PLUG (MCD) 250KG (6240901205)[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED] DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
25) PLUG 450 KG (MCD) (6231101105)[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
26) PLUG DUMMY 250 KG (6241101114)[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
27) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
28) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
29) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
30) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
31) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
32) Protecting Ring Assly 1000LBS (6220900610)[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG. NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES], CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER 8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP C Nonestab
33) ROLLING RING ASSEMBLY 250KG (6241100114)[62]() Specification : ROLLING RING ASSY. TO DRG No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED] C Nonestab
34) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
35) TA PIN BLANK T-90 (6120100118)[61]() Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO OFM/TDS/TECH/O6A. C Nonestab
36) TA BOLT M-20 (6120100107)[61]() Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840 DRG.ENCLOSED. C Nonestab
37) TA BOLT M-27 (6120100108)[61]() Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841 [DRG.ENCLOSED. C Nonestab
38) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
39) PLUG REAR (6250000501)[62]() Specification : PLUG REAR TO DRG.No. OFM/30858 [BASED ON ITV 52. [DRG.ENCLOSED] C Nonestab
40) HEX SOCKET SET SCREW 450 KG (6230001304)[62]() Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP). C Nonestab
41) HEX SOCKET SET SCREW (BT) 450 KG (1727041225)[17]() Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP) C Nonestab
42) HEX SOCKET HD CAP SCREW M6X25 (1732040625)[17]() Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT]. C Nonestab
43) HEX SOCKET SET SCREW M5 450KG (6230901104)[62]() Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP) C Nonestab
44) LOCKING SCREW FOR DETO. HOLDER (6220901100)[62]() Specification : LOCKING SCREW (FOR DETONATOR HOLDER) ARM-1172A-3 DRG. ENCLOSED]. C Nonestab
45) SCEWFOR RING NUT (6220900800)[62]() Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED] C Nonestab
46) SOCKET SET SCREW FOR BASE TRANSIT (1751020207)[17]() Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED]. C Nonestab
47) LOCKING SCREW FOR CONT. EXPLOTER (6220900710)[62]() Specification : LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18] [DRG. ENCLOSED]. C Nonestab
48) TA CLAMP MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
49) SET OF TA SHOE & TA GUIDE MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
50) TA LINK HEAT TREATED[99]() Specification : AS PER SPEFICIFICATION C Nonestab
51) SET OF TA SHOE & TA GUIDE HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
52) TA CLAMP HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
Category : ddp
Grade : Grade II
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) TA LINK HEAT TREATED[99]() Specification : AS PER SPEFICIFICATION C Nonestab
2) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
3) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
4) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
5) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
6) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Nonestab
7) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A C Nonestab
8) PLUG REAR (6250000501)[62]() Specification : PLUG REAR TO DRG.No. OFM/30858 [BASED ON ITV 52. [DRG.ENCLOSED] C Nonestab
9) HEX SOCKET SET SCREW 450 KG (6230001304)[62]() Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP). C Nonestab
10) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
11) LOCKING SCREW FOR DETO. HOLDER (6220901100)[62]() Specification : LOCKING SCREW (FOR DETONATOR HOLDER) ARM-1172A-3 DRG. ENCLOSED]. C Nonestab
12) Protecting Ring Assly 1000LBS (6220900610)[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG. NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES], CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER 8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP A C Nonestab
13) THRUSTER PLATE FORGING 1000 LBS (6220200120)[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. C Nonestab
14) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
15) HEX SOCKET SET SCREW (BT) 450 KG (1727041225)[17]() Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP) C Nonestab
16) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
17) SOCKET SET SCREW FOR BASE TRANSIT (1751020207)[17]() Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED]. C Nonestab
18) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
19) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
20) SET OF TA SHOE & TA GUIDE MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
21) TA CLAMP MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
22) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]() Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
23) FORGED BODY 81 MM (REAR PART) (6220000141)[62]() Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
24) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
25) TA PIN BLANK T-90 (6120100118)[61]() Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO OFM/TDS/TECH/O6A. C Nonestab
26) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
27) PLUG 450 KG (MCD) (6231101105)[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
28) TA BOLT M-20 (6120100107)[61]() Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840 DRG.ENCLOSED. C Nonestab
29) TA BOLT M-27 (6120100108)[61]() Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841 [DRG.ENCLOSED. C Nonestab
30) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
31) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
32) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
33) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
34) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
35) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
36) PLUG DUMMY 250 KG (6241101114)[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
37) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Nonestab
38) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
39) PLUG FASTENING 250 KG (6241101124)[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
40) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Nonestab
41) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
42) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
43) ROLLING RING ASSEMBLY 250KG (6241100114)[62]() Specification : ROLLING RING ASSY. TO DRG No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED] C Nonestab
44) PLUG A/C 34 1000 LBS (6220501010)[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
45) PLUG (MCD) 250KG (6240901205)[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED] DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
46) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
47) HEX SOCKET HD CAP SCREW M6X25 (1732040625)[17]() Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT]. C Nonestab
48) HEX SOCKET SET SCREW M5 450KG (6230901104)[62]() Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP) C Nonestab
49) SCEWFOR RING NUT (6220900800)[62]() Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED] C Nonestab
50) LOCKING SCREW FOR CONT. EXPLOTER (6220900710)[62]() Specification : LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18] [DRG. ENCLOSED]. C Nonestab
51) TA CLAMP HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
52) SET OF TA SHOE & TA GUIDE HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
53) TA BOLT M20 DRG 17255026[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : Grade II
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) TA LINK HEAT TREATED[99]() Specification : AS PER SPEFICIFICATION C Nonestab
2) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
3) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
4) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
5) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
6) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Nonestab
7) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A C Nonestab
8) PLUG REAR (6250000501)[62]() Specification : PLUG REAR TO DRG.No. OFM/30858 [BASED ON ITV 52. [DRG.ENCLOSED] C Nonestab
9) HEX SOCKET SET SCREW 450 KG (6230001304)[62]() Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP). C Nonestab
10) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
11) LOCKING SCREW FOR DETO. HOLDER (6220901100)[62]() Specification : LOCKING SCREW (FOR DETONATOR HOLDER) ARM-1172A-3 DRG. ENCLOSED]. C Nonestab
12) Protecting Ring Assly 1000LBS (6220900610)[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG. NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES], CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER 8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP A C Nonestab
13) THRUSTER PLATE FORGING 1000 LBS (6220200120)[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. C Nonestab
14) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
15) HEX SOCKET SET SCREW (BT) 450 KG (1727041225)[17]() Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP) C Nonestab
16) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
17) SOCKET SET SCREW FOR BASE TRANSIT (1751020207)[17]() Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED]. C Nonestab
18) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
19) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
20) SET OF TA SHOE & TA GUIDE MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
21) TA CLAMP MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
22) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]() Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
23) FORGED BODY 81 MM (REAR PART) (6220000141)[62]() Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB MORTAR 'C'EMPTY BODY. C Nonestab
24) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
25) TA PIN BLANK T-90 (6120100118)[61]() Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO OFM/TDS/TECH/O6A. C Nonestab
26) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
27) PLUG 450 KG (MCD) (6231101105)[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
28) TA BOLT M-20 (6120100107)[61]() Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840 DRG.ENCLOSED. C Nonestab
29) TA BOLT M-27 (6120100108)[61]() Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841 [DRG.ENCLOSED. C Nonestab
30) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
31) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
32) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
33) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
34) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
35) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
36) PLUG DUMMY 250 KG (6241101114)[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
37) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Nonestab
38) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
39) PLUG FASTENING 250 KG (6241101124)[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
40) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Nonestab
41) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
42) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
43) ROLLING RING ASSEMBLY 250KG (6241100114)[62]() Specification : ROLLING RING ASSY. TO DRG No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED] C Nonestab
44) PLUG A/C 34 1000 LBS (6220501010)[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
45) PLUG (MCD) 250KG (6240901205)[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED] DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
46) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
47) HEX SOCKET HD CAP SCREW M6X25 (1732040625)[17]() Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT]. C Nonestab
48) HEX SOCKET SET SCREW M5 450KG (6230901104)[62]() Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP) C Nonestab
49) SCEWFOR RING NUT (6220900800)[62]() Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED] C Nonestab
50) LOCKING SCREW FOR CONT. EXPLOTER (6220900710)[62]() Specification : LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18] [DRG. ENCLOSED]. C Nonestab
51) TA CLAMP HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
52) SET OF TA SHOE & TA GUIDE HEAT TREATED[99]() Specification : AS PER SPECIFICATION C Nonestab
53) TA BOLT M27 X 1 POINT 5 6G[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : Grade II
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) FILLING PLUG MACHINED LF NO 6250700174[62]() Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) TAIL UNIT 2A FOR MORTAR BOMB 120 MM ILLG.[63]() Specification : CQA(A) 2342[DRG.NO. CIA/AMN/1397,PART NO. ITV 11 A C Nonestab
2) EYE LET FOR 120MM ILLG.[63]() Specification : DRG. NO. ARDE - 2011 , DET NO. 21 PT. NO.ITV-150 SPECN NO. CQA (A) 2321 (b) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BODY EMPTY FOR 51MM SMOKE[62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 DC-36973-A DT.09/08/04 & SPEN.NO.CQA(A) 2352 (d) DC-36768 A DATED.18/07/2001 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) ADAPTER NOSE FOR M.B.81MM ILLG.2A[62]() Specification : CQA(A) 2345(C) DRG. NO. ARDE 1965 DET 4 PT NO. ITV 114 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BASE CANISTER FOR SHELL 155 mm Illg[63]() Specification : DRG.NO 2440AI3012 DC-37535A DATED 22.10.19 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BASE CANISTER FOR SHELL 155 mm Illg[63]() Specification : DRG.NO 2440AI3012 DC-37535A DATED 22.10.19 C Nonestab
2) SUPPORT PARACHUTE (SET OF 4) FOR SHELL 155MM ILLG.[63]() Specification : DRG. NO. 2440A20012 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) TAIL ADAPTER FOR BOMB 51MM SMOKE[62]() Specification : DRG. NO. CQA(A)/AMN/2935, DET NO. 2 PT.NO. ITV-274 SPECN. NO. CQA(A) 2352(d) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) NOSE CAP FOR 51 MM SMOKE [62]() Specification : DRG. NO. ARDE-2082 DET. NO. 7 PT. NO. ITV-215 DC(I)36288-A, SPECN.CQA(A) 2352(d) DC-36768-A DT 18-7-2001. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) Pin Locking for 51mm Illg. [62]() Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 SPECN.CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BASE PLATE FOR 81MM ILLG.[62]() Specification : SPECN. CQA(A) 2345 (C) DRG. NO. ARDE 1965 DET 13 PT NO. ITV 123 C Nonestab
2) BAFFLE PLATE FOR 81MM ILLG. MK II[62]() Specification : DRG NO. ARDE 1965, DET 15, PT NO. ITV 125, DC 37039A DT. 25/01/2006. C Nonestab
3) Pin Locking for 81mm Illg. MK-II[62]() Specification : SPECN. NO. CQA(A) 2345 (C) DRG NO ARDE 1965 DET 26 PT NO ITV 115 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) Eye bolt for M.B. 81mm Illg. 2A[62]() Specification : CQA(A) 2345(c) Drg. No. ARDE 1965 DET 14 PT.NO. ITV 124 C Nonestab
2) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
3) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
4) Tail Unit 11Afor 81mm Illg. MK-II [62]() Specification : DRG.NO ARDE 2222 DET 4 PT NO ITV 38A SPECN: CQA(A) 2346 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) ADAPTER BUSH FOR 81MM AT AL[62]() Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19 C Nonestab
2) BUSH FOR 81MM ATAL[62]() Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6043000122 ADAPTER TUBE ASSY 81MM PWP, ITV 12A[60]() Specification : SPECN. NO. CQA(A) 2335 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6330604400 HOLDER DELAY FOR FZ B429[63]() Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]() Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6043000400 ADAPTER NOSE FOR 81MM MK 1L TV 44[60]() Specification : ADAPTER NOSE MORTAR BOMB NO. 1 TO DRG.PT.NO. TV 44 DC 36904-A DT.20/06/2003. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6410900130 CLAMPING NUT AND BASE ASSY DET 12 13[64]() Specification : CLAMPING NUT DRG. NO. 3-027321 DETAIL NO. 12 DC 36050-A ANDBASE DRG.NO.3-027321 DET. NO. 13 DC 36050-A FOR PRIMER GUV-7IN ASSEMBLED CONDITION AS PER DRG. NO. 3-027321/4B2/CD4. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6192228146 DETONATOR HOLDER ARDE 1146 DET 21[61]() Specification : DETONATOR HOLDER TO DRG. NO. ARDE-1146 DETAIL NO. 21 AL. NO.312 DT. 13-9-1977 FOR ROCKET 68 MM HE. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 4007622900 PLUG KEY HOLE BRASS 105M TKSH[40]() Specification : PLUG KEY HOLE DIA:7.75MM-0.25MM, LENGTH: 5.59MM-0.25MM,BRASSSPECN: BS-2874,CZ-1213PB. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) LOCKING NUT TO CQA A DRG NO 3 016919 DET 55 DC 37284 A DT 06 07 2011[63]() Specification : LOCKING NUT TO CQA(A)”DRG NO. 3-016919 DET-55DC-37284-A DT.06.07.2011 C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BASE PLATE FOR 51MM ILLG. 2A[62]() Specification : CQA(A) 2328 (c) DRG. NO. ARDE 2064 DET 14 PT.NO. ITV 231 C Nonestab
2) EMPTY COMPONENTS LOWER SET BOMB 51MM ILLG. 1A[62]() Specification : CQA(A) 2328 & CQA(A) 2332 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) SUPPORT PARACHUTE (SET OF 4) FOR SHELL 155MM ILLG.[63]() Specification : DRG. NO. 2440A20012 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1[63]() Specification : DRG NO. 2440A03062 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) CASE FOR CARTRIDGE CASE 16MM RED AIR FORCE[60]() Specification : CASE TO DRAWING NO.ARDE-2037 (REV.1) DET NO.2 DTD.06/09/2017 TO SPECN. ARDE/SPECN/130(a)- REVISION 1 DTD.08/06/2017. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BAFFLE PLATE FOR 81MM ILLG. MK II[62]() Specification : DRG NO. ARDE 1965, DET 15, PT NO. ITV 125, DC 37039A DT. 25/01/2006. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) Tail Unit 8A with Cap[62]() Specification : SPECN.CQA(A) 2324(i) DRG.NO.CQA(A)/AMN/2906 PT.NO.ITV-26 SA C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) DRAG RING A & B [62]() Specification : DRG NO. ARDE/ 2024 DET 33 AMENDED VIDE AL NO.650 DATED 14-3-90. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) SPRING HOLDER FOR 81MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 7 PT NO ITV 258 SPECN: NO. CQA(A) 2345(C) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) SUPPORT PARACHUTE (SET OF 4) FOR SHELL 155MM ILLG.[63]() Specification : DRG. NO. 2440A20012 C Nonestab
2) SET OF HOLDER PRIMARY CHARGE & ADAPTER PRIMARY CHARGE FOR SHELL 155MM ILLG. M1A1[63]() Specification : DRG. NO. 2439A22010 & 2439A22011 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) DISC INDEX FOR 16 MM WHITE[60]() Specification : DRG NO ARDE 1878 DET NO. 9 PT NO IQW C Nonestab
2) DISC INDEX FOR 16 MM RED[60]() Specification : DRG NO ARDE 1878 DET NO 7 PT NO IQW 201 DC 35720A DT. 31/5/94 C Nonestab
3) DISC INDEX FOR 16 MM GREEN[60]() Specification : DRG NO ARDE 1878 DET NO 8.PT NO IQW 202 DC 35720A DT. 31/5/94 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) DELAY TUBE FOR 51MM ILLG[62]() Specification : DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG. 1A[62]() Specification : CQA(A) 2328 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) SECURING NUT FOR 81MM 3D6[62]() Specification : NO. 4-26941 015 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) .Cone Ring in F C for TU-1111. Description : .Cone Ring in F C for TU-1111.() Specification : AS PER DRAWING C Estab
2) Cone Ring & Key Welding Assy. in F C Description : Cone Ring & Key Welding Assy. in F C() Specification : AS PER DRAWING C Estab
3) CONE RING ASSY FOR TU TB-250 Description : CONE RING ASSY FOR TU TB-250() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) .Cone Ring in F C for TU-1111. Description : .Cone Ring in F C for TU-1111.() Specification : AS PER DRAWING C Estab
2) Cone Ring & Key Welding Assy. in F C Description : Cone Ring & Key Welding Assy. in F C() Specification : AS PER DRAWING C Estab
3) CONE RING ASSY FOR TU TB-250 Description : CONE RING ASSY FOR TU TB-250() Specification : AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
2345 NOVATECH INDUSTRIES
313/21 BADU ROAD, DIGBERIA PO-BADU, KOLKATA-700128 BADU ROAD KOLKATA West Bengal
PIN1 : 700028
Phone No. : 25292050
GSTIN : 19ARWPD3997L1ZP 		ARWPD3997L

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) STRIKER TO CQA AMMN PART NO DRG NO QX 331 DC I 37263 A DT 26 08 10 Description : STRIKER TO CQA AMMN PART NO DRG NO QX 331 DC I 37263 A DT 26 08 10() Specification : STRIKER TO CQA(AMMN) PART NO (DRG.NO.) QX-331 DC(I) 37263-ADT.26.08.10 C Estab
Category : dp
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) BIPOD ASSEMBLY FOR LMG 5.56MM[70]() Specification : AS PER DRG. C Nonestab
2) MACHINING OF SMALL ARMS COMPONENTS[70]() Specification : AS PER DRG. C Nonestab
3) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE[70]() Specification : AS PER DRG. R Nonestab
Category : P
Grade : III
Size :
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FLASH ABSORBER FOR RIFLE 5.56 MM Description : FLASH ABSORBER FOR RIFLE 5.56 MM() Specification : Flash Absorber to DS CAT No. 1005-007739 in finished condition C Estab
2) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
3) Bayonet No. 5 MK-1 DS CAT No. 1005-000951 Description : Bayonet No. 5 MK-1 DS CAT No. 1005-000951() Specification : AS PER DRG. C Estab
4) 1.BIPOD ASSY. To DS CAT NO. 1005-557897 Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897 Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) Pistol Grip Assembly SK 6646 TE[70]() Specification : Pistol Grip Assembly SK-6646/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FLASH ABSORBER FOR RIFLE 5.56 MM Description : FLASH ABSORBER FOR RIFLE 5.56 MM() Specification : Flash Absorber to DS CAT No. 1005-007739 in finished condition C Estab
2) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
3) Bayonet 1-A drg .no. 1005-007812 for Rifle 5.56mm Description : Bayonet 1-A drg .no. 1005-007812 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
4) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FLASH ABSORBER FOR RIFLE 5.56 MM Description : FLASH ABSORBER FOR RIFLE 5.56 MM() Specification : Flash Absorber to DS CAT No. 1005-007739 in finished condition C Estab
2) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
3) Bayonet 1-A drg .no. 1005-007812 for Rifle 5.56mm Description : Bayonet 1-A drg .no. 1005-007812 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
4) SCABBARD BAYONET FOR CARBINE 9MM Description : SCABBARD BAYONET FOR CARBINE 9MM() Specification : SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) TRIGGER ASSEMBLY FOR SMALL ARMS Description : TRIGGER ASSEMBLY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FLASH ABSORBER FOR SMALL ARMS Description : FLASH ABSORBER FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
2) TRIGGER ASSEMBLY FOR SMALL ARMS Description : TRIGGER ASSEMBLY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Grip Pistol Assembly as per drawing No 27P 6500[70]() Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1 C Nonestab
Category :
Grade : Grade III
Size : S
2346 Autodynamics Technologies & Solutions Pvt. Ltd.
Survey No 279 (1&2), Raisoni Indusrieal Estate, Hinjewadi Phase 2, Maan , Mulshi hinjewadi-Pirangut road pune Maharashtra
PIN1 : 411057
Phone No. : 22939180
GSTIN : 27AAOCA4362Q1ZY 		PNEA22925A

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL E Nonestab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) PLASTIC PACKAGE FOR PRE-FRAG 100-120 KG BOMB (9911358232)[99]() Specification : PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY 2014 P Nonestab
Category : ddp
Grade : Grade II
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.1 FOR CARTG SA 12 BORE IN YELLOW COLOUR AS PER DRG. NO. AFK/SK-2888[60]() Specification : DRG. NO. AFK/SK-2888 C Nonestab
2) PLASTIC INDEX DISC-SHOT NO.BB FOR CARTGS SA 12 BORE IN WHITE COLOUR AS PER DRG.NO.AFK/SK-2888[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
3) PLASTIC INDEX DISC SHOT NO.8- OF CARTGS SA 12 BORE INCRIMSON RED COLOUR AS PER DRG NO. AFK/SK-2888 DT.04.05.2002[60]() Specification : DRG NO. AFK/SK-2888 DT.04.05.2002 C Nonestab
4) PLASTIC INDEX DISC-SHOT NO.4 FOR CARTG SA 12 BORE IN BLACK COLOUR AS PER DRG.NO.AFK/SK-2888 DT.17.01.2007[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Nonestab
5) PLASTIC INDEX DISC.SHOT NO.9 FOR CARTGS SA 12 BORE IN PINK COLOUR AS PER DRG.NO.AFK/SK-2888 DT.11.01.2007[60]() Specification : DRG.NO.AFK/SK-2888 DT.11.01.2007 C Nonestab
Category : p
Grade : Grade I
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CARRIER AMMUNITION 10 C , DESIGNER'S REF CIA/AMN/2317 PART NO.ISV 495A,SPECN CQA(A)2804[65]() Specification : CQA(A)2804 C Nonestab
Category : p
Grade : Grade I
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC CONTAINER NO P-11 TO DRG NO ARDE 1802 DATED 30-07-97 WITH SLEEVE-I(2 NOS),SLEEVE -II(1 NO),WASHER(1 NO) AND DISC (1 NO),TO DRG.NO. ARDE-1889 DET NO.4,5,6 DT. 30-7-97[60]() Specification : AS PER CQA(A) SPECN. C Nonestab
2) AMMUNITION CONTAINER 69 A/L PLASTIC TO DRG NO ARDE 2125,DET NO 3, PART NO ISV 533 A, SPECN NO CQA(A)2804[65]() Specification : CQA(A)2804 C Nonestab
3) CONTAINER NO RI MKI (IN) (EMPTY ASSY) TO DRG.NO ARDE 2025 DETAIL NO 1[65]() Specification : DRG.NO ARDE 2025 DETAIL NO 1 C Nonestab
4) CONTAINER 38B TO DESGN REF NO. CIA/AMN/2008 CONSISTING OF: 1. BODY 2. LID 3. RING A & DISC TO DESGN REF NO.CQA(A)/AMN/3042 DET 2&3 SLEEVE-A & SLEEVE-B TO DRG. NO. CQA(A)/AMN/2543 SHT. NO. 2 AND STICKER LABEL NO IA 1037.OR STICKER LABEL DRG.NO.AFK/SK-758-13[65]() Specification : DESGN REF NO. CIA/AMN/2008 C Nonestab
5) SET OF AMMUNITION CONTAINER 67 A,DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A WITH BOTTOM SLEEVE TO DRG. NO. ARDE 9657 DET.NO 1 TOP SLEEVE TO DRG.NO. ARDE 9657 DET. 2[60]() Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A C Nonestab
6) CONTAINER TO DRG NO.HEMRL DRG 1396 DET NO.3 PART NO IQX 1032 WITH LID FOR CONTAINER DRG NO. HEMRL DRG 1396 DET NO.5 PART NO. IQX 1034 AND CAP CONTAINER DRG NO.HEMRL DRG 1396 DET NO. 4 PART NO. IQX 1033[60]() Specification : DRG 1396 PART NO IQX 1032, PART NO. IQX 1034, PART NO. IQX 1033 C Nonestab
7) CHARGE HOLDER TO DRG NO. KF/SK-1746 SHEET NO 3 SPECN. NO .DGOF 135[60]() Specification : DGOF 135 C Nonestab
8) AMMUNITION CONTAINER 47 B, DES.REF CIA/AMN/2483, PT. NO. ISV 515 A, DC 36647-A, SPECN NO CQA(A) 2804 (m) DC 36202-A.[65]() Specification : CQA(A) 2804 C Nonestab
Category : p
Grade : Grade I
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BOX PLASTIC DRG NO. 04-44-79000-06130-3 DC 36177-A.[14]() Specification : DRG NO. 04-44-79000-06130-3 C Nonestab
2) PLASTIC DISC AS PER DRG NO. KF/SK-1572 DATED 03-04-96,MATERIAL-LDPE,TYPE 2. TO SPECN. JSS:9330-03,2014 REV 3 DC:5429-ME[21]() Specification : KF/SK-1572 C Nonestab
3) PLASTIC BOX FOR PACKING OF CARTGS. SA 0.22 RF BALL TO DRG. NO. AFK/SK 586-09 SHT. 1[65]() Specification : DRG. NO. AFK/SK 586-09 SHT. 1 C Nonestab
Category : p
Grade : Grade I
Size : S
2347 JOHN GALT INTERNATIONAL
D-213, KANAKIA ZILLION LBS ROAD KURLA WEST MUMBAI Maharashtra
PIN1 : 400070
Phone No. : 26529978
GSTIN : 27AACFJ7761M1ZU 		AACFJ7761M

Download 		1High Explosive Factory

Name Specification Use Status
1) OXIDISER CONTAINER[10]() Specification : RDE/92317/GS(PV)/DD/IOTS DTD. OCT 2001 & ACCEPTANCE TEST PLAN NO. RDE/92317/GS(PV)/ATP/IOTS DTD. OCT,2001 (MODIFIED FROM TIME TO TIME) S Nonestab
Category : p
Grade : Grade II
Size : S
2348 RIJ ENGINEERING PVT LTD
156, MAHALUNGE CHAKAN-TALEGAON ROAD PUNE Maharashtra
PIN1 : 410501
Phone No. : 660106
GSTIN : 27AAACR8065K1ZZ 		AAACR8065K

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) FORGING TO DRG. 64C 2035 200 D3 (FIRM'S MATERIAL) REQD FOR C2035 GAS CYLINDER.[70]() Specification : AS PER DRG OF IFORGING TO DRG. 64C 2035 200 D3 (FIRM'S MATERIAL) REQD FOR C2035 GAS CYLINDER. C Nonestab
2) CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009[00]() Specification : AS PER DRG OF CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009 C Nonestab
Category : p
Grade : Grade II
Size : M
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]() Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE. C Nonestab
2) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle C Nonestab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]() Specification : AS PER DRG. NO. K 2012 C Nonestab
4) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]() Specification : AS PER DRG NO TEND 2383 STR 2 C Nonestab
5) CONVERSION OF BOLT BREECH FROM FORGING TO TEND DRG.NO 2369 required for 0.315" Sporting Rifle[00]() Specification : AS PER TEND DRG.NO 2369 required for 0.315" Sporting Rifle C Nonestab
6) AUTO SEAR BLANK FOR ASSAULT RIFLE ( L.F.No.7024002517)[70]() Specification : As per Drg. No.TEND 2517 (for K 2067) C Nonestab
Category : p
Grade : Grade II
Size : M
1Ordnance Factory Muradnagar

Name Specification Use Status
1) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT " C Nonestab
2) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
3) TA LINK FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
4) SET OF TA SHOE AND TA GUIDE FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
5) TA CLAMP FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
Category : ddp
Grade : Grade I
Size : M
1Ordnance Factory Muradnagar

Name Specification Use Status
1) FORGING FOR LUG 318 (6220601406)[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS - 60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A C Nonestab
2) FORGING FOR LUG -243 (6220700172)[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
3) TA LINK FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
4) SET OF TA SHOE AND TA GUIDE FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
5) TA CLAMP FORGING[61]() Specification : AS PER SPECIFICATION C Nonestab
6) MACHINING OF TA CLAMP 6120100122[61]() Specification : AS PER OFM C Nonestab
7) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
8) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
9) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
10) SET OF TA SHOE TA GUIDE HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]() Specification : AS PER SPECIFICATION C Nonestab
11) TA CLAMP HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]() Specification : AS PER SPECIFICATION C Nonestab
12) TA LINK HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]() Specification : AS PER SPEFICIFICATION C Nonestab
13) TA PIN BLANK T-90 (6120100118)[61]() Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO OFM/TDS/TECH/O6A. C Nonestab
14) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
Category : ddp
Grade : Grade I
Size : M
2349 UNIVERSAL ENGINEERS CHENNAI PVT LTD
NO:72,NORTH PHASE,SIDCO INDUSTRIAL ESTATE,AMBATTUR,CHENNAI-600098 NORTH PHASE CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 26252158
GSTIN : 33AABCU1168R1ZY 		AABCU1168R

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) CLAMP TO 6201080003[62]() Specification : CLAMP TO DRG NO. 172.80.001CB-ACB C Nonestab
2) PANEL ALINGMENT STAND ASSY TO LF NO 6201095068[62]() Specification : AS PER VQC ATTACHED HEREWITH E Nonestab
Category :
Grade : Grade III
Size : M
2350 Prateek Industries
B-20,Scooters India Ancillary Estate Nadarganj Lucknow Uttar Pradesh
PIN1 : 226008
Phone No. : 9838638341
GSTIN : 09AAGFP5675C1Z2 		AAGFP5675C

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Eyelet Steel[21]() Specification : EYELET STEEL EYELET STEEL SCHEDULE NO. DMSRDE/LE2/2000/EYELET R Estab
2) Buckle Aluminium Alloy 38 mm Black Anodised[21]() Specification : CQA (GS)/US/324 Except Size & Attached Relevant Drawing R Estab
3) Metallic Buckle[21]() Specification : IS: 4274-1981(Re-affirmed 1996), [ Except for Shape and dimension, which shall be as per Drg. No-OCFAV/Buckle/001(a) 1. Material shall be grade "O" as per specn. No-IS:1079-1074-2. 2. In appearance and Finsih material shall match the se R Estab
4) Buckle Brass DBL. 51 mm with 2 Prongue[21]() Specification : As per approved Sample & Drawing No-CFS-SK-548 R Estab
5) Buckle Aluminium Alloy 25 mm Black Anodised[21]() Specification : CQA (GS)/US/324 Except Size & Attached Relevant Drawing R Estab
6) Metal Hooks 6 mm x Metal Clip 12 mm[21]() Specification : Size 1 Fig. 1 of IS Specification no. IS:4066-1967 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Eyelet Alum Alloy No W Washer[21]() Specification : EYELET ALUM ALLOY NO. WITH WASHER, NS-3 ALLOY CHEMICALLY PASSIVATED NO. 24. SPECNS:- IS:4084-1978 (FIRST REVISION) REAFFIRMED 2013, AMD-2 R Estab
2) HOOK STEEL[21]() Specification : HOOK STEEL SPECIFICATION :- AS PER DETAILS GIVEN ON PLATE NO. - 2 OF ATTACHED DRAWING WITH SPECIFICATION NO. JSS 4240-03 : 2011 R Estab
3) D RING 18 MM[21]() Specification : D RING 18 MM SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94/1(a) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011 R Estab
Category :
Grade : Grade III
Size : S
2351 MADHYA BHARAT AGRO PRODUCTS LIMITED UNIT-II
5-O-21 BASMENT R.C. VYAS COLONY BHILWARA Rajasthan
PIN1 : 311001
Phone No. : 237104
GSTIN : 23AADCM5913E2ZU 		BPLM08553G

Download 		1Ordnance Factory Itarsi

Name Specification Use Status
1) OLEUM[08]() Specification : OFI/0049/SPN DT.19.04.95 AMENDMENT-3 DT.13.09.96 R Estab
Category : p
Grade : Grade II
Size : L
2352 ASHA CELLULOSE ( I ) PVT.LTD
ASHA HOUSE,3RD FLOOR,PLOT NO.808/C,DR B A ROAD, DR B A ROAD DADAR TT MUMBAI Andaman and Nicobar Islands
PIN1 : 400014
Phone No. : 45411300
GSTIN : 24AACCA3502G1ZD 		MUMA19885F

Download 		1Ordnance Factory Bhandara

Name Specification Use Status
1) ETHYL CELLULOSE[10]() Specification : ETHYL CELLULOSE HIGH VISCOSITY TYPE N-200 CONFORMING TO SPCN CS-2724.THE MATERIAL WILL BE ACCEPTED AFTER TRIAL EXTRUSION OF SMOOTH AND TRANSPARENT E.C.SLEEVES WITHOUT ANY WRINKLES AND UNMOLTEN PARTICLES AND FREE FROM FOREIGN MATTER AND M R Nonestab
Category :
Grade : Grade III
Size : M
2353 Naval Chaff Supply India Pvt. Ltd.
2/33 Sarvpriya Vihar First Floor New Delhi Delhi
PIN1 : 110016
Phone No. : 45024772
GSTIN : 07AAICN2045H1ZK 		DELN24544C

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) CHAFF PAY LOAD FOR SRCR[61]() Specification : AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD -AI/4141 DT.5.5.10 C Nonestab
2) CHAFF PAY LOAD FOR MRCR[61]() Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10 C Nonestab
3) CHAFF PAY LOAD FOR LRCR[61]() Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10 C Nonestab
Category :
Grade : Grade III
Size : S
2354 UpBright Industrial Supply Pvt Ltd
208 Biradingi Benaras Road Howrah West Bengal
PIN1 : 711108
Phone No. : 9748405858
GSTIN : 19AABCU5023F1ZJ 		CALU05541E

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) D 20 SWITCHING UNIT TO 6206591102[62]() Specification : D 20 SWITCHING UNIT TO DRG NO. 172.70.276CB-CB C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO 6206505016[62]() Specification : MOUNTING OF ELECTRICAL COMPONENTS OF CLM TO DRG NO. 172.74.034CB-3 C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) MEMORY UNIT TO 6206004015[62]() Specification : MEMORY UNIT TO DRG NO. 172.74.001CB-3 C Nonestab
Category :
Grade : Grade III
Size : S
2355 AM DIAMOND ENGINEERING
57, Vivekananda Nagar PO Podrah KOLKATA West Bengal
PIN1 : 711109
Phone No. : 26448132
GSTIN : 09AABCS8714R1ZL 		AAGCA2447L

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]() Specification : AS PER DRG. NO. K 2012 C Nonestab
2) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL C Nonestab
3) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K 2025 C Nonestab
4) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL C Nonestab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 2023 C Nonestab
6) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO.K-2021 WITH FIRMS MATERIAL. (L.F No. 7024002021)[70]() Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) HAMMER WITH PINS TO RFI DRG. NO. PAG-0060 FOR 12 BORE MODIFIED PUMP ACTION GUN.[70]() Specification : HAMMER WITH PINS TO RFI DRG. NO. PAG-0060 FOR 12 BORE MODIFIED PUMP ACTION GUN. C Nonestab
2) BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN.[70]() Specification : IS:4368-1967 Gd-13. Ni3 Cr80 CASE HARDNESS:-500-550 VPN CASE DEPTH:-0.6 TO 1mm C Nonestab
3) TGG-102, UPPER BLOCK BARREL OF TEAR GAS GUN (LATEST DC RFINO. 09/022/14 DT.27.03.14) FROM TRADE SOURCE[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
2356 HOIST&LOAD
4,KHAIRU PLACE,KOLKATA,PIN-700072 KHAIRU PLACE KOLKATA West Bengal
PIN1 : 700072
Phone No. : 9038865966
GSTIN : 19AMAPS4114R1ZJ 		AMAPS4114R

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) ALUMINIUM FOIL BAG DRG 14059 0 0 LF 2101057012[21]() Specification : ALUMINIUM FOIL BAG TO DRG NO 14059-0-0 DC-34274-A DATE 23/11/1987 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) CIRCULAR BRASS LABEL FOR 1000 LBS BM LF 9911358723[99]() Specification : CIRCULAR BRASS LABEL FOR 1000 LBS BOMBS DRG.NO.-KHS-2-1-0359. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163[10]() Specification : JSS-1370-03:2007 REVISION NO (3) R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513 Description : PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513() Specification : PITCH COAL TAR SOFT-MEDIUM TYPE TO SPECN: JSS-5610-02:2014 (REV. NO. 4) DC NO. 5245-ME DT 18/06/2014 R Estab
Category : s
Grade : 3
Size : S
2357 SOHAM INDUSTRIES
33/5,KALACHAND NANDY LANE,KADAMTALA,HOWRAH KALACHAND NANDY LANE HOWRAH West Bengal
PIN1 : 711101
Phone No. : 9903876546
GSTIN : 19AHZPK7593EIZF 		AHZPK7593E

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) ALUMINIUM FOIL BAG DRG 14059 0 0 LF 2101057012[21]() Specification : ALUMINIUM FOIL BAG TO DRG NO 14059-0-0 DC-34274-A DATE 23/11/1987 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) CIRCULAR BRASS LABEL FOR 1000 LBS BM LF 9911358723[99]() Specification : CIRCULAR BRASS LABEL FOR 1000 LBS BOMBS DRG.NO.-KHS-2-1-0359. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) SHUTTER SPRING TBRL LF NO 9911358297[99]() Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1 C Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918[99]() Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294. C Nonestab
Category :
Grade : Grade III
Size : S
2358 MADRAS HARDTOOLS PRIVATE LIMITED
No.1,Perianna Maistry Street Near Broadway Chennai Tamil Nadu
PIN1 : 600001
Phone No. : 25222922 		CHEM00817F

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) TOWING ROPE ASSY / 172.91.368CBCB[06]() Specification : DRAWING NO. 172.91.368CBCB C Nonestab
Category : p
Grade : Grade II
Size : S
2359 Jayachandran Industries Private Limited
No 18, Rangasamy Road, Near Chinthamani, RS Puram Coimbatore Tamil Nadu
PIN1 : 641002
Phone No. : 4292316 		CMBJ04005B

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) BATTERY SECONDARY LEAD ACID (M.T.TYPE)[06]() Specification : BATTERY SECONDARY LEAD ACID (M.T.TYPE) / CQAL/637(A):2006 C Nonestab
Category : p
Grade : Grade II
Size : S
2360 SAINEST TUBES PRIVATE LIMITED
A-404, S G Business Hub, Near Gota Overbridge, Gota, Ahmedabad, Gujarat
PIN1 : 382470
Phone No. : 9099927707
GSTIN : 24AAECS5018D1ZS 		AHMS16908D

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) ALLOY STEEL SEAMLESS TUBE[01]() Specification : ALLOY STEEL SEAMLESS TUBE AS PER ASTM A213/T22. OD 9MM (+/-0.1MM), ID 7.1MM (+/- 0.1MM) COLD DRAWN AND ANNEALEAD, LENGTH WILL BE 500MM(+0MM/-10MM),NO BEND IS ACCEPTABLE IN 500MM LENGTH. REQUIRED FOR K-2092*4.MATERIAL SHOULD ACHIEVE HARDN R Nonestab
Category :
Grade : Grade III
Size : M

Copyright © 2025 - OFB