List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2161 Saru Smelting Pvt Ltd
Saru Nagar, Sardhana Road, Meerut Uttar Pradesh
PIN1 : 250001
Phone No. : 2556051
GSTIN : 09AACCS0019A1Z1 		MRTS00025E

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) WIRE LEAD ANT 5 66TO 5 74MM JSS9530 LF 0811200005[08]() Specification : LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS. R Nonestab
Category :
Grade : Grade III
Size : SS
1) Ammunition Factory Khadki
Name Specification Use Status
1) SEALS LEAD 10 MM DIA[20]() Specification : IND/GS/783 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) TIN INGOT 99.75% SPECN. IS 26 1966[08]() Specification : IS 26 1992 GRADE SN 99.75 OR BS-3252-1960 GRADE T2 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY PROJECTILE[60]() Specification : CQA[A] SEALED DRG NO. 04-749-130222- 01.1E C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Lead Tin Foil LF 0825260901 Description : Lead Tin Foil LF 0825260901() Specification : Lead Tin Foil 57.15*34.30*0.0381 mm +/- 0.0127mm thick (Sn(TIN) 4 TO 5%, Sb (ANTIMONY) 1% MAX, Pb (LEAD) Remainder To Spec: BS/STA-7/LX-1/1 R Estab
Category : dp
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK[08]() Specification : SPECN. NO. JSS 9535-06 R Estab
2) 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK.[08]() Specification : SPECN.IS-405 (PART-1):1992 (THIRD REV.) R Nonestab
3) 0801789173 SEAL LEAD SIZE 10 MM DIA[08]() Specification : SPECN. IS: 13923- 1993 (AMDT. 1) REAFFIRMED-1997 C Nonestab
4) 1001491897 POWDER MAGNESIUM GR C1 IS-2307-1977[10]() Specification : SPECN.NO.IS-2307-1977 (FIRST REVISION WITH AMMENDMENT NO.1) REAFFIRMED-1991 R Nonestab
5) 0832270092 STRIP TIN[08]() Specification : SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM. R Nonestab
6) 0832485001 WIRE SOLDER SN 60 PERC[08]() Specification : BS 441. R Nonestab
Category : p
Grade : Grade III
Size : SS
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) ZINC WIRE 2 MM DIA L F NO 0840210319[08]() Specification : ZINC WIRE 2 MM DIA.IN LINE TO LINE SPOOL 15 KG , GRADE Z 2 AS PER SPECN.BSEN 1179:2003, 99.99% PURITY. P Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) BORON POWDER GR I[10]() Specification : BORON POWDER GR-I, PURITY MIN 95% TO SPECN NO. IND/ME/980 : 2016 DC NO. 6033-ME DTD.08/06/2017 DS CAT NO. 6810-001175 (MAKE M/S S. B. BORON. US). C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005 Description : LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005() Specification : LEAD PIG ORDINARY (FLAT) 500 MM LONG X 100 MM WIDE X 70 MM THICK IN WEIGHT OF 30KG,Pb-99.99% TO SPECN.IS-27-1992(FOURTH REVISION)(REAFFIRMED 2014)(AMENDMENT NO1 APRIL 1998)(AMENDMENT NO2 DECEMBER 2010). R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) TIN FOIL FOR M-92[64]() Specification : OFN/BMCS/M92/TIN FOIL C Nonestab
Category : dp
Grade : Grade I
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TIN POWDER MZ 6605 1001771519 Description : TIN POWDER MZ 6605 1001771519() Specification : TIN POWDER TO SPECN NO.MZ 66005. DT. 21/04/2007. R Nonestab
2) SOLDER ELEC GRADE WIRE 16 18 20 SWG LF 0832469016 Description : SOLDER ELEC GRADE WIRE 16 18 20 SWG LF 0832469016() Specification : SOLDER ELECTRONIC GRADE WIRE 16/18/20 SWG 60/40 (TIN/LEAD) LOW MELTING MINIMUM RESISTANCE TO DRY SOLDER , AS PER SPECIFICATION IS-193-2000 (FIFTH REVISION) R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) LEAD TIN FOIL DECU 5 to 10MM WIDE x 0point04 to 0point05 MM THICK LF 0832260912 Description : LEAD TIN FOIL DECU 5 to 10MM WIDE x 0point04 to 0point05 MM THICK LF 0832260912() Specification : LEAD TIN FOIL DECU 5 to 10mm wide,0point04 to 0point05 MM thick and not longer than 300mm to drg no. 04-13x2454-02005 to spec STA7Tx2-Sep 1945 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ANODE CADMIUM LF 1582400000[15]() Specification : ANODE CADMIUM GR 99.98% (99.95% PURITY IS ALSO ACCEPTABLE) 305 MM X 206 MM X 6 MM THICK WITH GENERAL TOLERANCE IN DIMENSI0N TO SPECN: IS-2602-1989(1st REV)(REAFFIRMED 2016). R Nonestab
2) ANODE TIN SIZE 203 X 152 X 6 MM LF 1582720862[15]() Specification : ANODE TIN SIZE 203 X 152 X 6 MM THICK 99.9% PURITY TO SPECN:-IS-2384-1963.(REAFFIRMED 2016) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY[18]() Specification : LEAD SEAL, 12MM DIA.OF GOOD COMMERCIAL QUALITY C Nonestab
2) CENTERING BIT(LEAD WASHER) TO IRW-204-DET[65]() Specification : CENTERING BIT(LEAD WASHER) TO IRW-204-DET NO.4, ARDE-1934, DC NO.35466-A. C Nonestab
3) LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1)[08]() Specification : LEAD TIN FOIL(FOR DISC OF 3 G CAP) TO DRG. NO.DD(L)17235(SHEET-1) TO SIZE:0.025 TO 0.05MM (T) X 14.5MM (W) X 25M LENGTH TO SPECN: JSS:9535-06-2010(REV.2) C Nonestab
4) DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001[64]() Specification : DE-COPPERING AGENT WIRE 1.25,L=75+/ -2MM TO DRG.bW 7.045-001 AND GOST-5655-67 OR INDIGENOUS EQUIVALENT MATERIAL LEAD WIRE TO SPEC.NO.IS:27-1992(LATEST REV) (TO BE SUPPLIEDIN THE FORM OF A RING AS PER ASSY. DRG.NO. BL/CD/U-06/167). C Nonestab
5) LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH[08]() Specification : LEAD TIN FOIL,0.07mm +/- 0.01mm (T) X 14.5mm(W) X 25 METRES LENGTH TO SPECN.JSS:9535-06: 2010, REVISION NO.2,DC NO.4085-ME,DT.08.09.2010. C Estab
6) LEAD RING TO DRG.NO.b III 8.249.034[64]() Specification : LEAD RING TO DRG.NO.b III 8.249.034 DC NO.36310-A,DT-14.07.97. C Estab
7) LEAD WIRE SIZE:1.25 +/- 0.25MM DIA[62]() Specification : LEAD WIRE SIZE:1.25 +/- 0.25MM DIA. TO SPECN: GOST-5655-67 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0825290052 FOIL LEAD TIN Description : 0825290052 FOIL LEAD TIN() Specification : JSS 9535-06 : 2010 P Estab
2) 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK Description : 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK() Specification : SPECN. NO. JSS 9535-06 P Estab
3) 0800390677 STRIP LEAD CHEM PURP 35 MM Description : 0800390677 STRIP LEAD CHEM PURP 35 MM() Specification : IS: 405-1992 P Estab
4) 0800360086 STRIP LEAD GEN PURP 35 MMW Description : 0800360086 STRIP LEAD GEN PURP 35 MMW() Specification : IS: 405 (PART-2) -1992 IN REEL SIZE 3 TO 10 KGS. P Estab
5) 0800110125 WIRE LEAD Description : 0800110125 WIRE LEAD() Specification : GOST 5655-67. GRADE OF LEAD TO SPECN. GOST 3778-77 P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) LEAD SEAL 10 MM DIA IS 13923 1993 LF 1861901001 Description : LEAD SEAL 10 MM DIA IS 13923 1993 LF 1861901001() Specification : LEAD SEAL 10 MM DIA TO SPECN:IS-13923-1993 (REAFFIRMED-2018) R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) FOIL TIN LEAD FOR CHARGE-9 Description : FOIL TIN LEAD FOR CHARGE-9() Specification : DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002. R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) Powder Tin[10]() Specification : POWDER TIN CONFORMING TO SPCN.CS/2163, SIZE ALL PASS THROUGH 240 BSS (63 MICRON IS SIEVE). R Nonestab
2) FOIL TIN LEAD FOR CHARGE-9[08]() Specification : DECOPPERING AGENT FOR CHARGE 8 & 9 DRG.NO. 6388122 155 MM FH 77 B- DC NO. 36819-A DT- 15.03.2002. R Nonestab
3) LEAD SEAL SIZE 1/2[08]() Specification : LEAD SEAL SIZE 1/2" DIA TO DRG. NO. OFBA/NR/613 DTD.09.12.06 R Nonestab
4) LEAD TUBE FOR FLSC-12[08]() Specification : LEAD TUBE FOR FLSC-12 (GEN TOLERANCE 2102) SPECIFICATION IS:404-1993 PART-1, GRADE-1. LEAD PURITY 99.9% (MIN) DIMENSION- ID:6.5, -0.2MM, OD:13.0, -0.2 MM LENGTH OF COIL 4 METER R Nonestab
5) LEAD TUBE FOR FLSC-25[08]() Specification : LEAD TUBE FOR FLSC-25 (GEN TOL 2102) SPECIFICATION : IS:404-1993, PART-1, GRADE-1. LEAD PURITY : 99.9% (MIN) DIMENSION- ID:11.0,-0.3 MM, OD:18.0.2 MM LENGHT OF COIL 4 METER. R Nonestab
6) LEAD TUBE FOR FLSC 10[08]() Specification : LEAD TUBE FOR MANUFACTURE OF FLSC-10 CHARGES CONFIRMING TO THE SPECIFICATION -IND/MEM911(PROV)DC 3842-ME DT. 04.04.05 1)LEAD PURITY=99.5% MIN. 2)M.P.=315 DEG.CENTI. MIN.3)OD=20.5 1.5MM 4)ID=12.7 1.0MM 5)WALL THICKNESS 3.90 0.25MM 6)LENGT R Nonestab
Category : p
Grade : Grade III
Size : SS
2162 OMEGA CORPORATION
1006-B, LOKMAT BHAWAN, WARDHA ROAD NAGPUR MAHARASHTRA INDIA
PIN1 : 440012
Phone No. : 9423103530
GSTIN : 27AGCPM4203F1ZU 		AGCPM4203F

Download 		1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP Description : 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP() Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES C Estab
2) 0133030123 ERA MOUNTING PLATE ASSY STD Description : 0133030123 ERA MOUNTING PLATE ASSY STD() Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CARTG PP3 EOFE EMPTY ASSY TRD 1279 LF 9911351544[99]() Specification : CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) COMPRESSOR ROTARY POWER DRIVEN 1A 220 m3 per Hr 9 point 8 kPa at 2300 rev per min to Drg No EGA 164 D Sheet I and II and other details as per Annexure A[00]() Specification : COMPRESSOR, ROTARY POWER DRIVEN, 1A 220m3/Hr, 9.8 kPa at 2300 rev/min to CAT SECTION & CAT/PART No.63/4310-000002 and Drg.No.EGA-164/D (Sheet I & II) & other details as per Annexure Á”. C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) TIN FOIL FOR M-92[64]() Specification : OFN/BMCS/M92/TIN FOIL C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91 AND M-92[64]() Specification/ Drawing No.: OFN/ BMCS/ M-91/ M-92/BARRIER BAG C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) TIN FOIL FOR M-92[64]() Specification : OFN/BMCS/M-91/M-92/TIN FOIL C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) TIN FOIL FOR M-91 and M-92[64]() Specification : OFN/BMCS/M-91/M-92/TIN FOIL C Nonestab
2) TIN FOIL FOR M-91 and M-92[64]() Specification : OFN/BMCS/M-91/M-92/TIN FOIL C Nonestab
Category : ddp
Grade : Grade II
Size : S
2163 AEROGRAPHIC PAPERS PVT.LTD.
E-40,MIDC,HINGNA ROAD, NAGPUR MAHARASHTRA HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440028
Phone No. : 234689
GSTIN : 27AABCA5902H1ZY 		NGPA02795C

Download 		1) Ordnance Factory Bolangir
Name Specification Use Status
1) PAPER BROWN (WAXED),280*195(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT[14]() Specification : PAPER BROWN (WAXED),280*195(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -2013-REV.4 DC-5186-ME DT.19.03.14. R Estab
2) PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT[14]() Specification : PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -2013:REV-4 DC NO-5186 ME DT.19.03.14. R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) PAPER BROWN (WAXED),280*195(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT[14]() Specification : PAPER BROWN (WAXED),280*195(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -2013-REV.4 DC-5186-ME DT.19.03.14. R Estab
2) PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT[14]() Specification : PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -2013:REV-4 DC NO-5186 ME DT.19.03.14. R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER LAMINATED GR3 0 65 TO 0 73MM 1410010084 Description : PAPER LAMINATED GR3 0 65 TO 0 73MM 1410010084() Specification : PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER LAMINATED GR3 0 65 TO 0 73MM 1410010084 Description : PAPER LAMINATED GR3 0 65 TO 0 73MM 1410010084() Specification : PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515 Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515() Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011. C Nonestab
2) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313 Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313() Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16 C Nonestab
3) GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822 Description : GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822() Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3 C Nonestab
4) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676 Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676() Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014. C Nonestab
5) PAPER BOARD CORRUGATED LF 1411817752 Description : PAPER BOARD CORRUGATED LF 1411817752() Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK. C Nonestab
6) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178 Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178() Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014. C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515 Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515() Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011. C Nonestab
2) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313 Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313() Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16 C Nonestab
3) GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822 Description : GLAZED BOARD 914 4X304 8X0 5MM LF 1423403822() Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3 C Nonestab
4) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676 Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676() Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014. C Nonestab
5) PAPER BOARD CORRUGATED LF 1411817752 Description : PAPER BOARD CORRUGATED LF 1411817752() Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK. C Nonestab
6) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178 Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178() Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014. C Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91 AND M-92[64]() Specification/ Drawing No. OFN/BMCS/M-91/M-92/BARRIERBAG C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91 AND M-92[64]() Specification/ Drawing No. OFN/BMCS/M-91/M-92/BARRIERBAG C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91 AND M-92[64]() Specification/ Drawing No. OFN/BMCS/M91/M92/BARRIER BAG C Nonestab
2) DISC SPACER FOR M-91[60]() Specification/ Drawing No. OFN/BMCS/M91/M92/DISC SPACER C Nonestab
3) PLASTIC FILM BAG FOR M-91[64]() Specification/ Drawing No. OFN/BMCS/M91/M92/PLASTIC FILM BAG C Nonestab
4) PLASTIC FILM BAG FOR M-92[64]() Specification/ Drawing No. OFN/BMCS/M91/M92/PLASTIC FILM BAG C Nonestab
5) PLASTIC FILM SLEEVE FOR M-92[64]() Specification/ Drawing No. OFN/BMCS/M92/PLASTIC FILM SLEEVE C Nonestab
6) SELF ADHESIVE TAPE FOR M-91 OF 155 MM BMCS[25]() Specification/ Drawing No. OFN/BMCS/M91/M92/SELF ADHESIVE TAPE C Nonestab
7) SELF ADHESIVE TAPE FOR M-92[25]() Specification/ Drawing No. OFN/BMCS/M91/M92/SELF ADHESIVE TAPE C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91 AND M-92[64]() Specification/ Drawing No. OFN/BMCS/M91/M92/BARRIER BAG C Nonestab
2) DISC SPACER FOR M-91[60]() Specification/ Drawing No. OFN/BMCS/M91/M92/DISC SPACER C Nonestab
3) PLASTIC FILM BAG FOR M-91[64]() Specification/ Drawing No. OFN/BMCS/M91/M92/PLASTIC FILM BAG C Nonestab
4) PLASTIC FILM BAG FOR M-92[64]() Specification/ Drawing No. OFN/BMCS/M91/M92/PLASTIC FILM BAG C Nonestab
5) PLASTIC FILM SLEEVE FOR M-92[64]() Specification/ Drawing No. OFN/BMCS/M92/PLASTIC FILM SLEEVE C Nonestab
6) SELF ADHESIVE TAPE FOR M-91 OF 155 MM BMCS[25]() Specification/ Drawing No. OFN/BMCS/M91/M92/SELF ADHESIVE TAPE C Nonestab
7) SELF ADHESIVE TAPE FOR M-92[25]() Specification/ Drawing No. OFN/BMCS/M91/M92/SELF ADHESIVE TAPE C Nonestab
Category : dp
Grade : Grade II
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103789156 SHEET SANDWICHED TYPE CAMBRIC-POLYT[21]() Specification : IND/ME/740 (D) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103789156 SHEET SANDWICHED TYPE CAMBRIC-POLYT[21]() Specification : IND/ME/740 (D) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103789156 SHEET SANDWICHED TYPE CAMBRIC-POLYT[21]() Specification : IND/ME/740 (D) R Nonestab
2) 1418940031 PAPER LAMINATED GR I 914 MM WIDE[14]() Specification : IND/ME/786(D):2013 R Estab
3) 1410018984 PAPER LAMINATED GR II 914 MM WIDE[14]() Specification : IND/ME/786(D):2013 DC R Nonestab
4) 1410016984 PAPER LAMINATED GR III 914 MM WIDE[14]() Specification : SPECN. NO. IND/ME/786 R Estab
5) 1410016990 PAPER LAMINATED GR III 102 MM WIDE[14]() Specification : SPECN. NO. IND/ME/786 R Estab
6) 1410018278 PAPER LAMINATED GR III 127 MM WIDE[14]() Specification : SPECN NO. IND/ME/786(D):2013 R Nonestab
7) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG[14]() Specification : JSS 9310- 03: 2010 R Nonestab
8) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM[14]() Specification : SPECN. NO. JSS 8135-017 R Nonestab
9) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN[14]() Specification : SPECN. NO. JSS-8135-05 R Estab
10) 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE[14]() Specification : JSS:8135-09: 2004 R Nonestab
11) 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5[14]() Specification : SPECN. NO. JSS 8135-09 R Nonestab
12) 1418617801 CORGTD CARD BOARD SHEET A B C SIZES[14]() Specification : CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET I HEMRL/ED/DRG NO.001 DET.NO.1 SZ-600MM X225MM X32.5MM THICK 18 NOS/SET. (B) PKG.SHEET II DET.NO.2 SZ- 590MM X235MM X42.5MM THK.18 NOS/SET.(C)PKG.SHEET III DET.NO.3 SZ- 23 R Nonestab
13) 1418617802 CORGTD CARD BOARD SHEET ABCD SIZES[14]() Specification : CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET IV HEMRL/ED/DRG.NO.002 DET.NO.1 SZ -470MM X180MM X10MM TH.4NOS/SET (B)PKG.SHEET V DET.NO.2 SZ-170MM X160MM X20MM TH 2NOS/SET. (C)PKG.SHEET VI DET.NO.3 SZ-135MM X160MM X40 R Nonestab
14) 1418617803 CORGTD CARD BOARD SHEET ABCD SIZES[14]() Specification : ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32M R Nonestab
15) 1419828715 PAPER WHITE FINE JSS 9310-06:2002.[14]() Specification : SPECN. JSS - 9310-06 : 2002 R Nonestab
16) 1419828815 PAPER WHITE FINE[14]() Specification : JSS 9310-06: 2002 R Nonestab
17) 1421014629 MILL BOARD SIZE 787MM X 559MM X 6MM[14]() Specification : JSS 9310-01:2007 R Nonestab
18) 2103789155 POLYTHENE LAY FLAT 200 X 0.076 MM.[21]() Specification : JSS 9330-03:2007 REVISION NO 2 R Nonestab
19) 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM[25]() Specification : SPECN. NO. JSS 9330- 03 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2103789156 SHEET SANDWICHED TYPE CAMBRIC-POLYT[21]() Specification : IND/ME/740 (D) R Nonestab
2) 1418940031 PAPER LAMINATED GR I 914 MM WIDE[14]() Specification : IND/ME/786(D):2013 R Estab
3) 1410018984 PAPER LAMINATED GR II 914 MM WIDE[14]() Specification : IND/ME/786(D):2013 DC R Nonestab
4) 1410016984 PAPER LAMINATED GR III 914 MM WIDE[14]() Specification : SPECN. NO. IND/ME/786 R Estab
5) 1410016990 PAPER LAMINATED GR III 102 MM WIDE[14]() Specification : SPECN. NO. IND/ME/786 R Estab
6) 1410018278 PAPER LAMINATED GR III 127 MM WIDE[14]() Specification : SPECN NO. IND/ME/786(D):2013 R Nonestab
7) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG[14]() Specification : JSS 9310- 03: 2010 R Nonestab
8) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM[14]() Specification : SPECN. NO. JSS 8135-017 R Nonestab
9) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN[14]() Specification : SPECN. NO. JSS-8135-05 R Estab
10) 1418020085 BROWN PAPER FOR PRIMARY CARTG CASE[14]() Specification : JSS:8135-09: 2004 R Nonestab
11) 1418020086 PAPER NATURAL BROWN COLOUR OF 685.5[14]() Specification : SPECN. NO. JSS 8135-09 R Nonestab
12) 1418617801 CORGTD CARD BOARD SHEET A B C SIZES[14]() Specification : CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET I HEMRL/ED/DRG NO.001 DET.NO.1 SZ-600MM X225MM X32.5MM THICK 18 NOS/SET. (B) PKG.SHEET II DET.NO.2 SZ- 590MM X235MM X42.5MM THK.18 NOS/SET.(C)PKG.SHEET III DET.NO.3 SZ- 23 R Nonestab
13) 1418617802 CORGTD CARD BOARD SHEET ABCD SIZES[14]() Specification : CORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET IV HEMRL/ED/DRG.NO.002 DET.NO.1 SZ -470MM X180MM X10MM TH.4NOS/SET (B)PKG.SHEET V DET.NO.2 SZ-170MM X160MM X20MM TH 2NOS/SET. (C)PKG.SHEET VI DET.NO.3 SZ-135MM X160MM X40 R Nonestab
14) 1418617803 CORGTD CARD BOARD SHEET ABCD SIZES[14]() Specification : ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32M R Nonestab
15) 1419828715 PAPER WHITE FINE JSS 9310-06:2002.[14]() Specification : SPECN. JSS - 9310-06 : 2002 R Nonestab
16) 1419828815 PAPER WHITE FINE[14]() Specification : JSS 9310-06: 2002 R Nonestab
17) 1421014629 MILL BOARD SIZE 787MM X 559MM X 6MM[14]() Specification : JSS 9310-01:2007 R Nonestab
18) 2103789155 POLYTHENE LAY FLAT 200 X 0.076 MM.[21]() Specification : JSS 9330-03:2007 REVISION NO 2 R Nonestab
19) 2512925322 BAG POLYTHENE SZ-1170 X 303 X 0.5MM[25]() Specification : SPECN. NO. JSS 9330- 03 C Nonestab
Category : p
Grade : Grade III
Size : S
2164 THE RUBY MILLS LIMITED
Ruby House J.K. Sawant Marg,Dadar West Mumbai Maharashtra
PIN1 : 400028
Phone No. : 24387800
GSTIN : 27AAACTO220G1XZ 		MUMT09628D

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Camouflage Cloth Commercial Polyester 600 D PVC PV Coated 150 CM Excluding Selvedges[21]() Specification : AS PER ENCLOSED SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
2) FABRIC NYLON LT. WT. 37G RIP STOP WEAVE OLIVE DRAB SHADE NO. 298 AS PER SPECN. 94CM WIDTH[2101221982]() Specification : SPECIFICATION NO.. IS:4726-1984 R Nonestab
3) FABRIC NYLON 66, 93g U/D 120 Cm.[2101221251]() Specification : ADRDE/SPECN/2000/53(b) R Estab
4) FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM.[2101211903]() Specification : SECIFICATION NO. : ADRDE/SPECN/1983/14. R Estab
5) FABRIC NYLON 75GM UNDYED 91.4CM[2101212091]() Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur and in addition the R Estab
6) FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3[2101221295]() Specification : Specification: IS:4726-1984. R Estab
7) FABRIC NYLON 52 GMS UNDYED 91.4 CMS.[2101221109]() Specification : SPECIFICATON NO.:-ADRDE/SPECN/1988/32 R Estab
8) FABRIC NYLON 109 GRM U/D 122 CM FOR PARA BOMB 105 MM[9911035223]() Specification : ADRDE/SPECN/1985/28(c) R Estab
9) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS[2101221979]() Specification : SPECN NO ADRDE/SPECN/1983/14 R Estab
10) FABRIC NYLON 66, 37 GM U/D 91.4 CM[2101221324]() Specification : SPECN-TECHNICAL PARTICULARS NO.ADRDE/QAC/TECH PART/03/45 DTD.28-01-2003 R Estab
11) FABRIC NYLON 105 GM UNDYED 110 CM.[2101212105]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/42 R Estab
12) FABRIC NYLON LIGHT WEIGHT 37 GMS UNDYED 94 CMS FOR P.P.[2101221216]() Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading R Estab
13) FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 R Estab
14) FABRIC NYLON 109g U/D 91.4cm[2101221160]() Specification : SPECN. NO.: ADRDE/SPECN/1985/28(c). R Estab
15) FABRIC NYLON 35 GSM WIDTH 94 CM OG[2101221358]() Specification : ADRDE/QMS/TDTM/SPECN/98 R Estab
16) FABRIC NYLON 35 GSM WIDTH 94 CM SAND COLOR[2101221357]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
17) FABRIC NYLON 35 GM U/D WIDTH 94 CM[2101221355]() Specification : AS PER SPECIFICATION R Estab
18) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.[2101221592]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Estab
19) FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM.[2101221969]() Specification : SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) R Estab
20) FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM[2101221970]() Specification : SPECIFICATION : ADRDE/SPECN/2002/56(b) R Estab
21) FABRIC NYLON 48+-2gm Plain Weave SAND 100 cm width[2101221256]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
22) FABRIC NYLON 48 +- 2 GM PLAIN WEAVE ORANGE 100 CM WIDTH.[2101221255]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
23) FABRIC NYLON 48+-2 GM PLAIN WEAVE U/D 100 CM WIDTH.[2101221254]() Specification : ADRDE/SPECN/2002/56 (b)(VTY.NO.2) R Estab
24) FABRIC NYLON 48+-2gm Plain Weave OG 100cm width[2101221253]() Specification : ADRDE/SPECN./2002/56(b) (VTY.NO.2) R Estab
25) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE NAVY BLUE 94 CMS.[2101226194]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14 (EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
26) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE SKY BLUE 94 CMS.[2101226095]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14(EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED R Estab
27) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE RED NO.298 AS PER SPECN NO.IS:5, 94 CMS[2101226094]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1983/14( EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
28) FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE[2101221356]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
29) FABRIC NYLON 185 GM UNDYED 92 CM .[2101211985]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1993/43 R Estab
30) CANVAS NYLON 220 GM. 91.4 CMS. UNDYED[2101099890]() Specification : SPECIFICATION NO.: JSS 8305 - 38 : 2015 R Estab
31) FABRIC NYLON 93GM U/D WIDTH 95 CM[2101221989]() Specification : SPCNS NO.: ADRDE/SPECN/2000/53(b) R Estab
32) FABRIC NY. 58 G UD 100 CM WIDTH[2101221262]() Specification : AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) R Estab
33) FABRIC NYLON 48 + -2 GMS ORANGE 95 CMS[2101221992]() Specification : SPECN:ADRDE/specn./2002/56(b) variety NO.2 R Estab
34) CANVAS NYLON 425 GM GREY 105 CM[2101126375]() Specification : SPECN-ADRDE/SPECN/1984/23(a) R Estab
Category : p
Grade : Grade II
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON POLYURETHENE COATED 105 GMS WHITE WIDTH 100 CM[2101221248]() Specification : SPECN NO.: JSS:8305-32:2003 R Nonestab
2) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
3) FABRIC NYLON LT. WT. 37G RIP STOP WEAVE OLIVE DRAB SHADE NO. 298 AS PER SPECN. 94CM WIDTH[2101221982]() Specification : SPECIFICATION NO.. IS:4726-1984 R Nonestab
4) FABRIC NYLON 66, 93g U/D 120 Cm.[2101221251]() Specification : ADRDE/SPECN/2000/53(b) R Estab
5) FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM.[2101211903]() Specification : SECIFICATION NO. : ADRDE/SPECN/1983/14. R Estab
6) FABRIC NYLON 75GM UNDYED 91.4CM[2101212091]() Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur and in addition the R Estab
7) FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3[2101221295]() Specification : Specification: IS:4726-1984. R Estab
8) FABRIC NYLON 52 GMS UNDYED 91.4 CMS.[2101221109]() Specification : SPECIFICATON NO.:-ADRDE/SPECN/1988/32 R Estab
9) FABRIC NYLON 109 GRM U/D 122 CM FOR PARA BOMB 105 MM[9911035223]() Specification : ADRDE/SPECN/1985/28(c) R Estab
10) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS[2101221979]() Specification : SPECN NO ADRDE/SPECN/1983/14 R Estab
11) FABRIC NYLON 66, 37 GM U/D 91.4 CM[2101221324]() Specification : SPECN-TECHNICAL PARTICULARS NO.ADRDE/QAC/TECH PART/03/45 DTD.28-01-2003 R Estab
12) FABRIC NYLON 105 GM UNDYED 110 CM.[2101212105]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/42 R Estab
13) FABRIC NYLON LIGHT WEIGHT 37 GMS UNDYED 94 CMS FOR P.P.[2101221216]() Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading R Estab
14) FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 R Estab
15) FABRIC NYLON 109g U/D 91.4cm[2101221160]() Specification : SPECN. NO.: ADRDE/SPECN/1985/28(c). R Estab
16) FABRIC NYLON 35 GSM WIDTH 94 CM OG[2101221358]() Specification : ADRDE/QMS/TDTM/SPECN/98 R Estab
17) FABRIC NYLON 35 GSM WIDTH 94 CM SAND COLOR[2101221357]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
18) FABRIC NYLON 35 GM U/D WIDTH 94 CM[2101221355]() Specification : AS PER SPECIFICATION R Estab
19) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.[2101221592]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Estab
20) FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM.[2101221969]() Specification : SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) R Estab
21) FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM[2101221970]() Specification : SPECIFICATION : ADRDE/SPECN/2002/56(b) R Estab
22) FABRIC NYLON 48+-2gm Plain Weave SAND 100 cm width[2101221256]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
23) FABRIC NYLON 48 +- 2 GM PLAIN WEAVE ORANGE 100 CM WIDTH.[2101221255]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
24) FABRIC NYLON 48+-2 GM PLAIN WEAVE U/D 100 CM WIDTH.[2101221254]() Specification : ADRDE/SPECN/2002/56 (b)(VTY.NO.2) R Estab
25) FABRIC NYLON 48+-2gm Plain Weave OG 100cm width[2101221253]() Specification : ADRDE/SPECN./2002/56(b) (VTY.NO.2) R Estab
26) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE NAVY BLUE 94 CMS.[2101226194]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14 (EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
27) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE SKY BLUE 94 CMS.[2101226095]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14(EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED R Estab
28) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE RED NO.298 AS PER SPECN NO.IS:5, 94 CMS[2101226094]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1983/14( EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
29) FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE[2101221356]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
30) FABRIC NYLON 185 GM UNDYED 92 CM .[2101211985]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1993/43 R Estab
31) CANVAS NYLON 220 GM. 91.4 CMS. UNDYED[2101099890]() Specification : SPECIFICATION NO.: JSS 8305 - 38 : 2015 R Estab
32) FABRIC NYLON 93GM U/D WIDTH 95 CM[2101221989]() Specification : SPCNS NO.: ADRDE/SPECN/2000/53(b) R Estab
33) FABRIC NY. 58 G UD 100 CM WIDTH[2101221262]() Specification : AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) R Estab
34) FABRIC NYLON 48 + -2 GMS ORANGE 95 CMS[2101221992]() Specification : SPECN:ADRDE/specn./2002/56(b) variety NO.2 R Estab
35) CANVAS NYLON 425 GM GREY 105 CM[2101126375]() Specification : SPECN-ADRDE/SPECN/1984/23(a) R Estab
36) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
37) FABRIC NYLON LT. WT. 37G RIP STOP WEAVE OLIVE DRAB SHADE NO. 298 AS PER SPECN. 94CM WIDTH[2101221982]() Specification : SPECIFICATION NO.. IS:4726-1984 R Nonestab
38) FABRIC NYLON 66, 93g U/D 120 Cm.[2101221251]() Specification : ADRDE/SPECN/2000/53(b) R Estab
39) FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM.[2101211903]() Specification : SECIFICATION NO. : ADRDE/SPECN/1983/14. R Estab
40) FABRIC NYLON 75GM UNDYED 91.4CM[2101212091]() Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur and in addition the R Estab
41) FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3[2101221295]() Specification : Specification: IS:4726-1984. R Estab
42) FABRIC NYLON 52 GMS UNDYED 91.4 CMS.[2101221109]() Specification : SPECIFICATON NO.:-ADRDE/SPECN/1988/32 R Estab
43) FABRIC NYLON 109 GRM U/D 122 CM FOR PARA BOMB 105 MM[9911035223]() Specification : ADRDE/SPECN/1985/28(c) R Estab
44) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS[2101221979]() Specification : SPECN NO ADRDE/SPECN/1983/14 R Estab
45) FABRIC NYLON 66, 37 GM U/D 91.4 CM[2101221324]() Specification : SPECN-TECHNICAL PARTICULARS NO.ADRDE/QAC/TECH PART/03/45 DTD.28-01-2003 R Estab
46) FABRIC NYLON 105 GM UNDYED 110 CM.[2101212105]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/42 R Estab
47) FABRIC NYLON LIGHT WEIGHT 37 GMS UNDYED 94 CMS FOR P.P.[2101221216]() Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading R Estab
48) FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 R Estab
49) FABRIC NYLON 109g U/D 91.4cm[2101221160]() Specification : SPECN. NO.: ADRDE/SPECN/1985/28(c). R Estab
50) FABRIC NYLON 35 GSM WIDTH 94 CM OG[2101221358]() Specification : ADRDE/QMS/TDTM/SPECN/98 R Estab
51) FABRIC NYLON 35 GSM WIDTH 94 CM SAND COLOR[2101221357]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
52) FABRIC NYLON 35 GM U/D WIDTH 94 CM[2101221355]() Specification : AS PER SPECIFICATION R Estab
53) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.[2101221592]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Estab
54) FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM.[2101221969]() Specification : SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) R Estab
55) FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM[2101221970]() Specification : SPECIFICATION : ADRDE/SPECN/2002/56(b) R Estab
56) FABRIC NYLON 48+-2gm Plain Weave SAND 100 cm width[2101221256]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
57) FABRIC NYLON 48 +- 2 GM PLAIN WEAVE ORANGE 100 CM WIDTH.[2101221255]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
58) FABRIC NYLON 48+-2 GM PLAIN WEAVE U/D 100 CM WIDTH.[2101221254]() Specification : ADRDE/SPECN/2002/56 (b)(VTY.NO.2) R Estab
59) FABRIC NYLON 48+-2gm Plain Weave OG 100cm width[2101221253]() Specification : ADRDE/SPECN./2002/56(b) (VTY.NO.2) R Estab
60) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE NAVY BLUE 94 CMS.[2101226194]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14 (EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
61) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE SKY BLUE 94 CMS.[2101226095]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14(EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED R Estab
62) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE RED NO.298 AS PER SPECN NO.IS:5, 94 CMS[2101226094]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1983/14( EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
63) FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE[2101221356]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
64) FABRIC NYLON 185 GM UNDYED 92 CM .[2101211985]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1993/43 R Estab
65) CANVAS NYLON 220 GM. 91.4 CMS. UNDYED[2101099890]() Specification : SPECIFICATION NO.: JSS 8305 - 38 : 2015 R Estab
66) FABRIC NYLON 93GM U/D WIDTH 95 CM[2101221989]() Specification : SPCNS NO.: ADRDE/SPECN/2000/53(b) R Estab
67) FABRIC NY. 58 G UD 100 CM WIDTH[2101221262]() Specification : AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) R Estab
68) FABRIC NYLON 48 + -2 GMS ORANGE 95 CMS[2101221992]() Specification : SPECN:ADRDE/specn./2002/56(b) variety NO.2 R Estab
69) CANVAS NYLON 425 GM GREY 105 CM[2101126375]() Specification : SPECN-ADRDE/SPECN/1984/23(a) R Estab
Category : p
Grade : Grade II
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
2) FABRIC NYLON LT. WT. 37G RIP STOP WEAVE OLIVE DRAB SHADE NO. 298 AS PER SPECN. 94CM WIDTH[2101221982]() Specification : SPECIFICATION NO.. IS:4726-1984 R Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Cloth PW Poly Viscose Dope dyed OG 150cm[21]() IND/TC/0048(g) R Nonestab
Category : p
Grade : Grade II
Size : L
2165 SMPP PVT LTD
M-17 , N.D.S.E, Part-II, New Delhi-110049 south ex. delhi Delhi
PIN1 : 110049
Phone No. : 26252554
GSTIN : 06AADCS9516R1ZN 		AADCS9516R

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 FOR HARD ARMOUR PANEL FOR FRONT AND BACK[21]() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 FOR HARD ARMOUR PANEL FOR FRONT AND BACK[21]() Specification : AS PER SPECIFICATION R Nonestab
2) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 HARD ARMOUR PANEL SIDE[21]() Specification : AS PER SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) CCC of Items for 125mm prac ammn LF 9911358371 Description : CCC of Items for 125mm prac ammn LF 9911358371() Specification : Combustible Cartg. Case of 7 items for 125mm Practice ammn. R Nonestab
2) NC disc II for 125mm FSAPDS Practice LF 9911358706 Description : NC disc II for 125mm FSAPDS Practice LF 9911358706() Specification : NC disc II for primary and secondary 125mm FSAPDS Practice drg. no. IRW 225 R Nonestab
3) NG Barrier of 125mm FSAPDS practice LF 9911358705 Description : NG Barrier of 125mm FSAPDS practice LF 9911358705() Specification : NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1 2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg R Nonestab
Category : ddp
Grade : 3
Size : M
1) Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704 Description : COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704() Specification : COMBUSTIBLE COMPONENTS FOR PRIMARY AND SECONDARY 125MM FSAPDS PRACTICE (HEMRL/CCC/PS/417 AUG.2017) CONSIST OF.1.COMBUSTIBLE BODY PRIMARY -PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/1 .2.COMBUSTIBLE INNER CAP PRIMARY-PRACTICE TO SPEC./DRG.N C Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP[64]() Specification : SET OF COMBUSTIBLE CARTG. CASE FSAPDS TO CQA(A) DRG.NO.IRW 5GE CONSISTING OF 1)COMBUSTIBLE BODY FSAPDS TO DRG.NO.IRW 231 2)COMBUSTIBLE CAP FSAPDS IRW 236 3)COMBUSTIBLE CLOSING DISCIRW 237 4)SPACER IRW 238 5)COMBUSTIBLE CAP FSAPDS W/SPACER C Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6432100201 RESIN BASED CCC FOR 120 FSAPDS MKII[64]() Specification : RESIN BASED COMBUSTIBLE CARTG.CASE(CCC)SET (DRG.NO.10060820000000000TA (HEMRL/CCC/2013/FSMKII/SK001 SHT-1) CONSIST OF(1)BODY (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.1 SHT.2) (2)CAP(DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.2 SHT.3) (3)CLOSIN C Nonestab
2) 6432100202 RESIN BASED CCC FOR 120MM FSAPDS MK[64]() Specification : SET OF RESIN BASED CCC (COMP-3) FOR 120 MMM FSAPDS MK-I AMMNSPECN.NO.HEMRL/CCC/PS/371,REV-01,JULY 2013 & CONST.OF (I)RESIN BASED COMB.BODY TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.1,(II)CAP TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.2 (III)CLOSINGDIS C Nonestab
3) 6432200201 RESIN BASED CCC FOR 120MM HESH AMMN[64]() Specification : SET OF RESIN BASED CCC (COMP-3) FOR 120 MM HESH AMMN. SPECN.(HEMRL/CCC/PS/372, REV 01, JULY 2013 & DRG.NO. CONST.OF (I)RESIN BASED COMB. BODY DRG.NO.HEMRL/CCC/2005/SK-2007,DET.1(II)CAP DRG.NO.HEMRL/CCC/2005/SK-2007,DET.2 (III)SPACER FORHE C Estab
4) 6432200001 SET OF CCC HESH COMP 4 120MM HESH[64]() Specification : SET OF COMBUSTIBLE CARTG.CASE HESH TO DRG.NO.IRW 4GE CONSISTING (1 NO.EACH) (1) COMBUSTIBLE BODY HESH TO DRG.NO.IRW 241(2) COMBUSTIBLE CAP HESH TO DRG.NO.IRW 242 (3)SPACER TO DRG.NO.IRW 243 (4) COMBUSTIBLE CAP HESH SPACER DETL.NO.4 WITHPA C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Composite Armour[90]() Specification : VFJ/ODC/SP/COMPOSITE ARMOUR/01 DTD. 05.05.17 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Composite Armour[90]() Specification : VFJ/ODC/SP/COMPOSITE ARMOUR/01 DTD. 05.05.17 C Nonestab
2) COMPOSITE ARMOUR (RHS) & (LHS)[90]() Specification : COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/E C Estab
3) MODIFIED COMPOSITE ARMOUR RHS AND LHS FOR UPGRADED MPV 4X4 DRG NO 26875731[90]() Specification : ODC-VFJ/SP/COMPOSITE ARMOUR/02 Dated 23.10.2019 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Composite Armour[90]() Specification : VFJ/ODC/SP/COMPOSITE ARMOUR/01 DTD. 05.05.17 C Nonestab
2) COMPOSITE ARMOUR (RHS) & (LHS)[90]() Specification : COMPOSITE ARMOUR (RHS) & (LHS) AS PER DRG NO. 645-15-1-1 TO 15/E C Nonestab
3) MODIFIED COMPOSITE ARMOUR RHS AND LHS FOR UPGRADED MPV 4X4 DRG NO 26875731[90]() Specification : ODC-VFJ/SP/COMPOSITE ARMOUR/02 Dated 23.10.2019 R Estab
4) SPALL LINER[90]() Specification : SPALL LINER AS PER SPECIFICATION NO. VFJ/ODC/TATA407 BS-IV SPALL LINER/01 DTD. 30/01/2019, AS PER ANNEXURE A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP Description : 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP() Specification : SET OF COMBUSTIBLE CARTG. CASE FSAPDS TO CQA(A) DRG.NO.IRW 5GE CONSISTING OF 1)COMBUSTIBLE BODY FSAPDS TO DRG.NO.IRW 231 2)COMBUSTIBLE CAP FSAPDS IRW 236 3)COMBUSTIBLE CLOSING DISCIRW 237 4)SPACER IRW 238 5)COMBUSTIBLE CAP FSAPDS W/SPACER C Estab
Category : p
Grade : 3
Size : S
2166 JEET & JEET GLASS AND CHEMICALS PVT LTD
F75A, ROAD NO. 1C V K INDUSTRIAL AREA JAIPUR Rajasthan
PIN1 : 302013
Phone No. : 4121101
GSTIN : 08AAACJ4816C1ZX 		JPRA00280A

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Rear Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
2) Wind Shield Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
3) Driver Side Glass with gun port hole with rubber beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
4) Side Glass with gun port hole with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
5) Co Driver Side Glass with gun port hole with rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Rear Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
2) Wind Shield Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
3) Driver Side Glass with gun port hole with rubber beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
4) Side Glass with gun port hole with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
5) Co Driver Side Glass with gun port hole with rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Rear Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
2) Side Glass with gun port hole with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
3) Windshield Glass with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
4) Driver Side Glass with Gun Port Hole with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
5) Co Driver Side Glass with Gun Port Hole with Rubber Beading[90]() Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Bullet Proof Glass[90]() Specification : No. ODC-OFMK/R&D/MMPV-03 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Bullet Proof Glass[90]() Specification : No. ODC-OFMK/R&D/MMPV-03 C Nonestab
2) WIND SHIELD GLASS (ARMY) MPV[90]() Specification : WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING) C Estab
3) DRIVER SIDE GLASS[90]() Specification : DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I) C Estab
4) CO-DRIVER SIDE GLASS[90]() Specification : CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I) C Estab
5) SIDE GLASS[90]() Specification : SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I) C Estab
6) REAR GLASS (ARMY) MPV[90]() Specification : REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I) C Estab
7) WIND SHIELD GLASS (MHA VERSION)[90]() Specification : WIND SHIELD GLASS PART NO. 640-10-1011/B C Estab
8) DRIVER SIDE GLASS (MHA VERSION)[90]() Specification : DRIVER SIDE GLASS WITH RUBBER BEADING PART NO 640-10-1012/B C Estab
9) CO DRIVER SIDE GLASS (MHA VERSION)[90]() Specification : CO DRIVER SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1013/B C Estab
10) SIDE GLASS (MHA VERSION)[90]() Specification : SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1014/B C Estab
11) REAR GLASS (MHA VERSION)[90]() Specification : REAR GLASS (WITH RUBBER BEADING) PART NO 640-10-1015/B C Estab
12) CO DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398097000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
13) DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398098000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
14) REAR GLASS FOR UPGRADED MPV 4x4 LF NO 9010398103000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
15) SIDE GLASS TROOPER ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398096000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
16) WIND SHIELD GLASS FOR UPGRADED MPV 4x4 LF NO 9010398104000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) TROOPER GLASS[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
2) BULLET PROOF GLASS 50MM THICK FOR SIDE DOOR CO DIVER SIDE[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
3) BULLET PROOF GLASS 50MM THICK FOR SIDE DOOR DRIVER SIDE[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
4) BULLET PROOF GLASS 50MM THICK FOR WIND SHIELD[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
5) BULLET PROOF GLASS 50MM THICK FOR REAR DOOR[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
6) 9010398112000 Rear Glass with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
7) 9010398113000 Wind Shield with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
8) 9010398114000 Driver Side Glass with gun port hole with rubber beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
9) 9010398115000 Side Glass with gun port hole with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents C Nonestab
10) 9010398116000 Co Driver Side Glass with gun port hole with rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Bullet Proof Glass[90]() Specification : No. ODC-OFMK/R&D/MMPV-03 C Nonestab
2) WIND SHIELD GLASS (ARMY) MPV[90]() Specification : WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING) C Estab
3) DRIVER SIDE GLASS[90]() Specification : DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I) C Estab
4) CO-DRIVER SIDE GLASS[90]() Specification : CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I) C Estab
5) SIDE GLASS[90]() Specification : SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I) C Estab
6) REAR GLASS (ARMY) MPV[90]() Specification : REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I) C Estab
7) WIND SHIELD GLASS (MHA VERSION)[90]() Specification : WIND SHIELD GLASS PART NO. 640-10-1011/B C Estab
8) DRIVER SIDE GLASS (MHA VERSION)[90]() Specification : DRIVER SIDE GLASS WITH RUBBER BEADING PART NO 640-10-1012/B C Estab
9) CO DRIVER SIDE GLASS (MHA VERSION)[90]() Specification : CO DRIVER SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1013/B C Estab
10) SIDE GLASS (MHA VERSION)[90]() Specification : SIDE GLASS (WITH RUBBER BEADING) PART NO 640-10-1014/B C Estab
11) REAR GLASS (MHA VERSION)[90]() Specification : REAR GLASS (WITH RUBBER BEADING) PART NO 640-10-1015/B C Estab
12) CO DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398097000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
13) DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398098000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
14) REAR GLASS FOR UPGRADED MPV 4x4 LF NO 9010398103000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
15) SIDE GLASS TROOPER ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398096000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
16) WIND SHIELD GLASS FOR UPGRADED MPV 4x4 LF NO 9010398104000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
17) BULLET PROOF GLASSES WITH RUBBER BEADING for BP SML LF No 9413100018000[90]() Specification : SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 C Nonestab
Category : p
Grade : Grade III
Size : S
2168 NEELU TRADERS
125/89 L GOVIND NAGAR GOVIND NAGAR KANPUR NAGAR Uttar Pradesh
PIN1 : 208014
Phone No. : 9984556759
GSTIN : 09AIFPM3408B1ZN 		AIFPM3408B

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) POLYTHENE TWINE BRAIDED VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
2) Cord Cotton Braided various[21]() Specification : As per requirement & specification R Nonestab
3) CORD NYLON BRAIDED VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
4) CORD ELASTIC VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
5) LACES NYLON VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
6) LACES FABRIC VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
Category : ddp
Grade : Grade III
Size : S
2169 OM SAI AUTO INDUSTRIES
VILLAGE KUMBH, AMLOH ROAD ,MANDI GOBINDGARH AMLOH ROAD MANDI GOBINDGARH Punjab
PIN1 : 147301
Phone No. : 9999620500
GSTIN : 03AAEFO4963G1ZC 		AAEF04963G

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LEAF SPRING ASSY.[90]() Specification : LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LEAF SPRING ASSY.[90]() Specification : LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A C Nonestab
Category :
Grade : Grade III
Size : S
2170 MIDAS RESOURCES OVERSEAS PVT. LTD.
LUBRICANT CENTER COMPLEX M.S MARG, NEAR HOTAL SOLAN ROURKELA Orissa
PIN1 : 769001
Phone No. : 9437043340
GSTIN : 21AAHCM2917Q1Z8 		AAHCM2917Q

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LEAF SPRING ASSY.[90]() Specification : LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LEAF SPRING ASSY.[90]() Specification : LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LEAF SPRING ASSY.[90]() Specification : LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A C Nonestab
Category :
Grade : Grade III
Size : S
2171 PELICAN AUTOMOBILE SPARES
Parvati ind. Area, Survey No. 137/1/1,Plot No. 3-4,PADAVALA-360024,Tal. Kotada Sangani,Dist. Rajkot (Guj.) INDIA. 137/1/1, Plot no. 3-4 137/1/1 RAJKOT Gujarat
PIN1 : 360024
Phone No. : 9879383155
GSTIN : 24AAJFP3648L1ZV 		AAJFP3648L

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL C Nonestab
2) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR C Nonestab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
4) LAUNCHER SHAFT[70]() Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL C Nonestab
5) RECEIVER BUSHING[70]() Specification : AS PER OFB REQUIREMENTS C Nonestab
6) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]() Specification : AS PER OFB REQ C Nonestab
7) Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR[70]() Specification : Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR C Nonestab
8) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]() Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]() Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]() Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7 C Nonestab
2) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY) C Nonestab
3) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]() Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL C Nonestab
4) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]() Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL C Nonestab
5) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]() Specification : AS PER OFT REQUIREMENTS R Nonestab
6) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]() Specification : AS PER OFT REQUIRMENTS R Nonestab
7) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]() Specification : AS PER OFT REQUIREMENT R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR C Nonestab
2) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR C Nonestab
3) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]() Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL C Nonestab
4) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]() Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672 C Nonestab
5) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]() Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670 C Nonestab
6) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]() Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE[74]() Specification : FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) ADAPTOR MAGAZINE[74]() Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
2) BOLT HOUSING[74]() Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
3) SHAFT ENCODER CASING[74]() Specification : SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
4) BUMPER ARM[74]() Specification : BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
5) BUMPER ARM LOCK[74]() Specification : BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
6) BLOCKING ELEMENT[74]() Specification : BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
7) BRACKET ASSY 1[74]() Specification : BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG C Nonestab
8) SECTOR BACK COVER FNSH[74]() Specification : SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
9) SECTOR FRONT COVER FNSH[74]() Specification : SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
10) ADAPTOR SPRING[74]() Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG C Nonestab
11) LIMITER EXTERNAL[74]() Specification : LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG C Nonestab
12) WASHER FLAT CRES M5 A4[74]() Specification : WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG C Nonestab
13) SUPPORT ELEVATION DRIVE[74]() Specification : SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
14) BOLT GEAR ELEVATION[74]() Specification : BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
15) BRACKET ASSY2[74]() Specification : BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG C Nonestab
16) SPACER OIL RETAINER[74]() Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG C Nonestab
17) SUPPORT GEAR TRAVERSE[74]() Specification : SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
18) ANGLE LIMITER RIGHT[74]() Specification : ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
19) ANGLE LIMITER LEFT[74]() Specification : ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
20) BASE STOP A[74]() Specification : BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GUIDE RECOIL FRONT[74]() Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
2) BUSHING THREAD REAR[74]() Specification : BUSHING THREAD REAR 1 (View) AS PER DRG NO.077853A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
3) COVER SOLENOID 2[74]() Specification : COVER SOLENOID 2 AS PER DRG NO.065283A-00 FOR SOLENOI SHOT ASSY OF SRCG C Nonestab
4) ROD LIMITER[74]() Specification : ROD LIMITER (View) AS PER DRG NO.066426A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
5) PLUG SPRING[74]() Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
6) BODY EXTERNAL WELDED[74]() Specification : BODY EXTERNAL WELDED (VIEW)064706A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
7) LEVER TRIGGER[74]() Specification : LEVER TRIGGER (View) AS PER DRG NO.Y03740A-00 FOR STAND WEAPON ASSY OF SRCG R Nonestab
8) HEAD COCKING 1[74]() Specification : HEAD COCKING 1(VIEW) AS PER DRG NO.066237A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PISTON INNER[74]() Specification : PISTON INNER (View) AS PER DRG NO.074263A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
2) COVER MOTOR[74]() Specification : COVER, MOTOR AS PER DRG NO.Y18725A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
3) SPACER ROTOR[74]() Specification : SPACER ROTOR (View) AS PER DRG NO.074312A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
4) KEY[74]() Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
5) STOPPER[74]() Specification : STOPPER (View) AS PER DRG NO.074266A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
6) NUT[74]() Specification : NUT (View) AS PER DRG NO.074267A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
7) WASHER ELASTOMER[74]() Specification : WASHER ELASTOMER (View) AS PER DRG NO.Y01876A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
8) HOUSING CONNECTOR[74]() Specification : HOUSING CONNECTOR(VIEW) AS PER DRG NO.074253A-00 FOR COCKING MECH.ASSY OF SRCG C Nonestab
9) COVER SOLENOID 1[74]() Specification : COVER SOLENOID 1 (VIEW) AS PER DRG NO.065281A-00 FOR SOLENOID SHOT ASSY OF SRCG C Nonestab
10) NUT SOLENOID[74]() Specification : NUT SOLENOID AS PER DRG NO.065454A-00 FOR SOLENOID SHOT ASSY OF SRCG C Nonestab
11) SCREW M10[74]() Specification : SCREW M10 (View) AS PER DRG NO.075871A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
12) BRACKET[74]() Specification : BRACKET AS PER DRG NO.Y17473A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
13) SCREW SHANK[74]() Specification : SCREW SHANK, AS PER DRG NO.Y00964A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
14) SCREW HEAD COCKING[74]() Specification : SCREW HEAD COCKING AS PER DRG NO.066628A-00 FOR STAND WEAPON ASSY OF SRCG C Nonestab
15) GUIDE RECOIL REAR[74]() Specification : GUIDE RECOIL, REAR AS PER DRG NO.063796A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
16) BUSHING GUIDE FRONT[74]() Specification : BUSHING GUIDE, FRONT AS PER DRG NO.063911A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
17) KEY AS PER DRG NO 074811A 00[74]() Specification : KEY (View) AS PER DRG NO.074811A-00 FOR CRADLE WEAPON ASSY OF SRCG C Nonestab
Category :
Grade : Grade III
Size : S
2172 Mahalaxmi Enterprises
Laddu wala complex ,Lashkar, Gwalior, 474001, Madhya Pradesh Laddu wala complex GWALIOR Madhya Pradesh
PIN1 : 474001
Phone No. : 9977339210 		ARMPG5357P

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Jacket Wind Cheater[21]() Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1 E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]() Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c) Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET" E Estab
2) FABRICATION OF PONCHO GLACIER[21]() Specification : FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I R Estab
3) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]() Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS. E Estab
4) FABRICATION OF BAG WATER PROOF[21]() Specification : FABRICATION OF BAG WATER PROOF AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS. E Estab
5) FABRICATION OF COAT ECC IMP VER[21]() Specification : FABRICATION OF COAT ECC IMP VER FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C E Estab
Category :
Grade : Grade III
Size : S
2173 Shanghvi Founders & Engineers Private Limited
Shanghvi Estate,GST Road,New Ranip,Ahmedabad -382470. GST Road Ahmedabad Gujarat
PIN1 : 382470
Phone No. : 27522642
GSTIN : 24AABCS5533L1ZA 		AABCS5533L

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9073200004 CASTING FOR BACK GUARD TO DRG NO 2A46M 109 62[90]() Specification : CASTING FOR BACK GUARD TO DRG.NO.2A46M.109-62. C Nonestab
Category :
Grade : Grade III
Size : S
2174 Kailadevi Traders
Kailash vihar colony, city centre, Gwalior,M.P.,474011 city centre, gwalior Madhya Pradesh
PIN1 : 474011
Phone No. : 9977339210 		BZKPG6870N

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Jacket Wind Cheater[21]() Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1 E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Cap Glacier[21]() Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample. E Estab
2) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]() Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c) Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET" E Estab
3) FABRICATION OF PONCHO GLACIER[21]() Specification : FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I R Estab
4) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]() Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS. E Estab
5) FABRICATION OF BAG WATER PROOF[21]() Specification : FABRICATION OF BAG WATER PROOF AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS. E Estab
6) FABRICATION OF COAT ECC IMP VER[21]() Specification : FABRICATION OF COAT ECC IMP VER FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C E Estab
Category :
Grade : Grade III
Size : S
2175 Muthu Poly Products
21 A1 Pioneer Mill High School Road Jothipuram Coimbatore Tamil Nadu
PIN1 : 641047
Phone No. : 2693320
GSTIN : 33ACKPJ0322L1ZV 		ACKPJ0322L

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.TAR-RB-K-1026 E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]() Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G), C Nonestab
2) POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050[70]() Specification : POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050 C Nonestab
3) Grip Pistol Assembly as per drawing No 27P 6500[70]() Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1 C Nonestab
4) Guard Hand Left Right Assembly Polymers[11]() Specification : Guard Hand Left Right Assembly Polymers E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BACK PLATE (NYLON) TO DRG. No. 33P 3015[70]() Specification : AS PER DRG OF BACK PLATE (NYLON) TO DRG. No. 33P 3015 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL FRONT TO DRG NO 33P 1302[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GRIP PISTOL AS PER DRG NoTAR RB K 1026 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No.TAR-RB-K-1026 E Nonestab
2) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL C Nonestab
3) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL C Nonestab
4) PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR[70]() Specification : PLASTIC MAGAZINE ASSEMBLY AS PER DRG NO K 7040 STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
5) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]() Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL C Nonestab
6) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]() Specification : AS PER OFB REQUIREMENTS C Nonestab
7) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR C Nonestab
8) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR C Nonestab
9) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]() Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA C Nonestab
10) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]() Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA C Nonestab
Category :
Grade : Grade III
Size : S
2176 International Plastics Ingenieure
279, East Mohan Nagar 100 Ft. Road Amritsar Punjab
PIN1 : 143001
Phone No. : 5004940
GSTIN : 03AAAFI2733C1Z6 		ABSPS9187K

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) CONTACT LF NO 7445181526[74]() Specification : CONTACT LF NO 7445181526 C Nonestab
2) PLUG DRG NO AL8348114 LF NO 7440200907[74]() Specification : PLUG DRG NO AL8348114 LF NO 7440200907 C Nonestab
3) RING DRG NO Y6057065 LF NO 9927091077[99]() Specification : RING DRG NO Y6057065 LF NO 9927091077 C Nonestab
4) COVER DRG NO AL8050656 LF NO 7445201057[74]() Specification : COVER DRG NO AL8050656 LF NO 7445201057 C Nonestab
5) LF NO 7441121522 FUSE HOLDER LITTEL FUSE[74]() Specification : LF NO. 7441121522, FUSE HOLDER LITTEL FUSE FUSE HOLDER LITTEL FUSE (HARN ESS CONNECTOR) AS PER OEM PART NO.342006 MAKE-L C Nonestab
6) 7440200238 SOCKET[74]() Specification : 7440200238 SOCKET RPS-1-15G SOCKET RPS-1-15G TO DRG NO.OUO 364044TU,FOR BLOCK-D C Nonestab
7) 7441122741 SOCKET[74]() Specification : 7441122741 SOCKET SOCKET RPS1-M-7G Drg No.TSSNK.430421.010 TU SOCKET SOCKET RPS1-M-7G AS PER SPECN, NO TSSNK.430421.010 TU C Nonestab
8) 9927094963 CONNECTOR[99]() Specification : 9927094963 CONNECTOR(SOCKET), RGIN-1-1 CONNECTOR SOCKET,RGIN-1-1 AS PER SPECN. NO. OUO.364.002 TY C Nonestab
9) PLUG 56089473 003 LF NO 7440206812[74]() Specification : PLUG 56089473 003 LF NO 7440206812 C Nonestab
10) FUSE CARTRIDGE DR NO AL6615233 LF NO 7440200836[74]() Specification : FUSE CARTRIDGE DR NO AL6615233 LF NO 7440200836 C Nonestab
Category :
Grade : Grade III
Size : S
2177 SIDERFORGEROSSI INDIA PVT LTD
82-84 - KRS ROAD, MYSORE-BELAGOLA INDL AREA MYSORE Karnataka
PIN1 : 570016
Phone No. : 4242643 		AAECM8284F

Download 		1) Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) TRACK TO DRG NO 172 55 SP 9 6201055001 Description : TRACK TO DRG NO 172 55 SP 9 6201055001() Specification : TRACK / 172.55SP-9 E Estab
Category : ddp
Grade : 3
Size : M
2178 RADHIKA PRINT TEX
GROUND FLOOR, 108/207 Ram bagh Kanpur Uttar Pradesh
PIN1 : 208012
Phone No. : 3050222
GSTIN : 09AAWFR1495C1ZQ 		KNPR03868E

Download 		1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Cord Nylon 3120 N OG[90]() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Tape Tubular Nylon braided 3.5MM U/D.() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Nylon webbing for AP BS 2950 Kg.() Specification : As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) Cord Nylon braided coreless 500N() As per Specification R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]() Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TAPE NYLON 26 MM MEDIUM U D BS 700 KG[2101796701]() Specification : ADRDE/ SPECN/65 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TAPE NYLON 20 MM UNDYED (BS=1350 KG) MINIMUM[2101776059]() Specification : SPECIFICATION NO. : ADRDE/SPECN/82. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CORD NYLON BRAIDED UNDYED 345 N CORELESS[2101119845]() Specification : SPECN.NO.: ADRDE/SPECN/1987/31. appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the custody of R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) WEBBING NYLON 44 MM U D 17800N[2101876973]() Specification : SPECN. NO.: IS:4727-1968 except for :- i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and C/QAI/TC-8/7(b). ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TAPE NYLON 26 MM 500 KGF U D[2101786990]() Specification : ADRDE/Specn/2000/54(d) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TAPE NYLON 13 MM U D 182 KG[2101786982]() Specification : ADRDE/QMS/TDTM/SPECN/94 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TAPE NYLON 66 26 MM TUBULAR BS 1850 KGF[2101786995]() Specification : ADRDE/Specn/2000/54(e) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CORDAGE NYLON BRAIED 250 KG OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994[2101126272]() Specification : SPECIFICATION NO. JSS:4020-8 ROLL LENGTH 285 MTR. EX-SAMPLING R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TAPE NYLON 20 MM UNDYED (BS=1350 KG) MINIMUM[2101776059]() Specification : SPECIFICATION NO. : ADRDE/SPECN/82. R Nonestab
2) Tape Nylon 25 MM BS 450 KG UD[2101221264]() Specification : ADRDE/SPECN/1992/38(b) R Nonestab
3) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]() Specification : SPECN. IS:4727-1968 Type -1 Except that :- 1) 180 picks/dm +/- 5% (2 picks/shed) 2) No. of folds in weft yarn-1 R Nonestab
4) CORD NYLON 1785 N B L WHITE[2101116225]() Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controlle R Nonestab
5) Fabrication of SD Para Pack Cover[2110025032]() Specification : Fabrication of SD Para Pack Cover is as per Specn. No. IND/TC/2694 with amendment 1, 2 & 3 R Nonestab
6) FABRICATION OF SUPPLY DROP PARACHUTE[2110025031]() Specification : Drg./Specn. No. IND/TC/2694 with amendment No. 1, 2 & 3. R Nonestab
7) Tape Nylon 66 26 mm BS 550 KGF[2101787013]() Specification : ADRDE/Specn/2000/54(e) Except that: picks/dm (with a tolerance of 1%)= 180. R Nonestab
8) Tape Nylon 1point3 cm 80 kg UD[2101776064]() Specification : ADRDE/SPECN/62(a) R Nonestab
9) FABRICATION OF PARA 51 MM[2110025067]() Specification : SPECN. No. ADRDE/553(d) R Nonestab
10) TAPE NYLON 27MM 1472N BS UD[2101221288]() Specification : ADRDE/QMS/TGTE/T/2019/06 DATED:21.06.2019. R Nonestab
Category :
Grade : Grade III
Size : S
2179 Stumpp Schuele and Somappa Springs Pvt Ltd
#04,Bommasandra Industrial area, Zigani link road,Bommasandra Bangalore Karnataka
PIN1 : 560099
Phone No. : 46467421 		AALCS7347E

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SPRING TO CQA A DRG NO 6W8 384 007 DC 37271 A DT 08 112010 Description : SPRING TO CQA A DRG NO 6W8 384 007 DC 37271 A DT 08 112010() Specification : SPRING TO CQA (A) DRG. NO. 6W8-384-007 DC-37271-A DT.08.11.2010 C Estab
Category : dp
Grade : 3
Size : S
2180 NEELAM MAHAJAN SAW MILL
VILL PANJETO CHACHRAULI ROAD JAGADHRI Haryana
PIN1 : 135103
Phone No. : 000000
GSTIN : 06AKZPM2688M1Z2 		AKZPM2688M

Download 		1) Ordnance Factory Nalanda
Name Specification Use Status
1) WOODEN CRATE[65]() Specification : OFN/BMCS/M-92/M91/WOODEN CRATE C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bolangir
Name Specification Use Status
1) PLYWOOD 6MM (+/- 6%)[22]() Specification : PLYWOOD 6MM (+/- 6%) THICKNESS OF SIZE (8' X 4') MR GRADE, TYPE: AB, BRANDED QUALITY TO SPECN. IS:303(LATEST ISSUE) C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bolangir
Name Specification Use Status
1) BOX UNIT LOAD FOR 155MM SHELL M107[14]() Specification : IND/ME/993 & IS:303-1989 C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Factory Bolangir
Name Specification Use Status
1) MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET[62]() Specification : MOP.12 SHELLS 155MM B/T ON PELLET WITHOUT GRUMET TO DRG.NO:155-1000(M)(UNIT LOAD) CONSISTING OF PALLET TO DRG.NO.155-1210(M), FRAME ASSEMBLY TO DRG.NO.155- 1230(M) DCNO.37126-A,DT.25.7.07. C Nonestab
2) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS[14]() Specification : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO.ISV 587 A, DC.37127-A DT.30.07.07. C Nonestab
Category :
Grade : Grade III
Size : SS
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) WOODEN CRATE ALL SIZES & (INTERNAL) 620 X 350X 350 MM() As per Specification R Nonestab
2) TIMBER CHIR & TIMBER PLANK ALL SIZES() As per Specification R Nonestab
Category :
Grade : Grade III
Size : SS
2181 Vinayaka Engineering Industries
EEE6 CIVIL TOWNSHIP, CIVIL TOWNSHIP ROURKELA Orissa
PIN1 : 769004
Phone No. : 9748000432
GSTIN : 21AKFPM2172C1ZS 		CALR06269E

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) STEEL ROD 16 MM DIA IN LENGTH[90]() Specification : STEEL ROD 16 MM DIA IN LENGTH OF 3 MTRS SPECN: BS-970, EN-24 C Nonestab
2) STEEL BAR ROUND 28 DIA[90]() Specification : RD. BAR 28 MM IN STD. LENGTH SPECN:IS-226 C Nonestab
3) MS ANGLE IRON 50x50x6MM[90]() Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062 C Nonestab
4) MS CHANNEL 75x40x40[90]() Specification : MS CHANNEL SZ (75×40×40)MM × 4.7 MM THICK TO SPECN IS-2062/94 (RE) CR "SK" IN STREIGHT LENGTH OF 1015 MM C Nonestab
5) SQ TUBE 40x40[90]() Specification : SQ TUBE 40×40×1.6 THICK SPECN IS-4923 ERW (1) 18224.00 MTRS IN LENGTH OF 2278 MM (2) 4792.00 MTRS IN LENGTH OF 2396 MM (3) 3275.00 MTRS IN LENGTH OF 5000 MM OVERALL TOLERANCE IN LENGTH (+) NIL (-) 2 MM C Nonestab
6) MS SHEET 2 MM THICK[90]() Specification : MS SHEET 2.00 MM THICK × 1250 × 2500 MM IS-1079 GR O (SK) B.C. 01.3202.0020 C Nonestab
7) MS PLATE 10 X 1000 OR 1250 X 4500 MM[90]() Specification : MS PLATE 10MM THICK × 1250/1500 × 5000 MM SPECN IS:2062 GR A/B C Nonestab
8) MS PLATE 12 MM IS 2062[90]() Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B" R Nonestab
9) MS PLATE 16 MM IS 2062 GR B[90]() Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG C Nonestab
10) MS PLATE 25 MM THICK[90]() Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42 C Nonestab
11) HR SHEET 4 MM X 1250 X 2500[90]() Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK) C Nonestab
12) HR SHEET 3 POINT15 MM X 1250 X 2500[90]() Specification : HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O" C Nonestab
13) STEEL ROD 45 MM DIA X 150 MM LENGTH[90]() Specification : STEEL ROD 45 MM DIA×150MM LENGTH. SPECIFICATION EN-9 BS:970. C Nonestab
14) MS PLATE 6 X 1250 X 4500 OR 5000 MM[90]() Specification : MS PLATE 6MM×1250×5000/6300 MM SPECN-IS:2062 GR "B" C Nonestab
15) CR SHEET[90]() Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK C Nonestab
16) FLAT 40 X 25 IN STD LENGT[90]() Specification : FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992 C Nonestab
17) MS PLATE 8 X 1400 OR 1500 X 4500 MM[90]() Specification : MS PLATE 8 MM THICK X 1500 X 4500/5000 MM SPECN IS:2062 GR. B OR ALTERNATE IS-2062 GR. C C Nonestab
18) STL SHT ST V 23 1MM THICK[90]() Specification : STL SHT ST V-23 1MM THICK C Nonestab
19) MS PLATE 5X1400 OR 1500X4500 OR 5000[90]() Specification : MS PLATE 5.00 MM THICK X 1400 OR 1500 X 4500 OR 5000 MM SPECN:- IS: 2062 GR. A/B C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025 Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025() Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A) R Estab
Category : p
Grade : 3
Size : S