1) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Estab
Category : p
Grade : Grade III
Size :
M
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) steel rod 180 mm dia[03]()
Specification : STEEL ROD,SPEC:BS-970 GR 817 M40(EN 24)DIA 180(+0/-2.0)MM IN THE LENGTH OF 2M TO 3M
R
Nonestab
2) steel rod 220 mm dia[03]()
Specification : Steel rod as per EN8/ASTM 106 gr.B dia 220 mm(+0/-3.0)mm length * 130(+/-1.0)mm to be supplied in cut lengths
R
Nonestab
Category :
Grade : Grade III
Size :
L
1) Small Arms Factory
Name
Specification
Use
Status
1) DIA 64MM+/-0.5MM STEEL ROD[01]()
Specification : DIA 64MM+/-0.5MM STEEL ROD TO SPECIFICATION IS:7283 1992 WITH MATERIAL TO CHEMICAL & MECHANICAL PROPERTY REQUIRMENTS OF IS:226 1975 FE 410-5 OR BS 970 PT1 :1991 GRADE 070 M 20 NORMALISED
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL ROD 32MM DIA[04]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT A
R
Nonestab
2) STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3[03]()
Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL ROD 32MM DIA[04]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT A
R
Nonestab
2) STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER )[01]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT A
R
Nonestab
2) SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMIN G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF B[03]()
3) STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3[03]()
Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL ROD 32MM DIA[04]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT A
R
Nonestab
2) STEEL ROD[03]()
Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MMTO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3[03]()
Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.&
(S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS
R
Nonestab
2) SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR CARBINE 9MM[03]()
Specification : SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROE
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER )[01]()
2) SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR MAG[03]()
Specification : SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROE
R
Nonestab
3) STEEL ROD 35 MM DIA[03]()
Specification : STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A A
R
Nonestab
4) STEEL ROD 14 MM DIA IN HOT ROLLED NORMALIZED CONDITION[02]()
Specification : SPECN.BS:970 PT-3:1991.GD 817M40 OR 826M40 TEST PIECE TO BE TESTED IN `Z' CONDITION.
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL ROD 32MM DIA[04]()
Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT A
R
Nonestab
2) STEEL ROD SIZE 15 MM[01]()
Specification : STEEL ROD SIZE 15 MM SPECN TO IS:5517-1993, GD 55C8 (EN-9) FOR SLEEVE BUTTON CATCH MAGAZINE FOR JVPC 5.56MM
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PARTED STEEL BILLET FOR 84 MM HEDP AS PER OFAJ DRG NO F 630[00]()
Specification : .
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PARTED STEEL BILLET FOR 105 MM IFG SHELL TO OFAJ DRG.NO. F-472 D.OTHER PARAMETERSARE TO BE GOVERNED BY OFAJ DRG. SPECN. NO. F-330 K LATEST ISSUE[00]()
Specification : as per DRG. SPECN. NO. F-330 K
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL[00]()
Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL[00]()
Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY FRONT PART AS PER DRG NO F 627[00]()
Specification : AS PER DRG
R
Nonestab
2) PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY REAR PART AS PER DRG NO F 628[00]()
Specification : AS PER DRAWING
R
Nonestab
3) STEEL BILLETS AS PER OFAJ DRG NO F 555 A FOR CANISTER FORGING[00]()
Specification : AS PER DRAWING
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PARTED STEEL BILLET TO OFAJ DRG NO F 602 B AND SPECIFICATION AS PER OFAJ SPECN NO F329M[00]()
Specification : AS PER OFAJ SPECN F329M
R
Nonestab
2) PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL[00]()
Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F/456D & OFAJ SPECN. DRG.NO.F-347M (LATEST ISSUE) FOR 130 MM HE SHELL
R
Nonestab
3) PARTED STEEL BILLET TO OFAJ DRG NO F 603 B AND SPECIFICATION AS PER OFAJ SPECN NO F 329M[00]()
Specification : AS PER OFAJ SPECN.NO.F-329M
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PARTED STEEL BILLET FOR 105 MM IFG SHELL TO OFAJ DRG.NO. F-472 D.OTHER PARAMETERSARE TO BE GOVERNED BY OFAJ DRG. SPECN. NO. F-330 K LATEST ISSUE[00]()
Specification : as per DRG. SPECN. NO. F-330 K
R
Nonestab
2) PARTED STEEL BILLET FOR 84 MM HEDP AS PER OFAJ DRG NO F 630[00]()
Specification : .
R
Nonestab
3) PARTED STEEL BILLET TO OFAJ DRG NO F 498 F AND SPECN AS PER OFAJ SPECN NO F 466 LATEST ISSUE FOR 155MM M1A4 SHELL[00]()
Specification : AS PER OFAJ SPECN NO.F-466
R
Nonestab
4) PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY FRONT PART AS PER DRG NO F 627[00]()
Specification : AS PER DRG
R
Nonestab
5) PARTED STEEL BILLETS FOR 120MM HE MORTAR BOMB BODY REAR PART AS PER DRG NO F 628[00]()
Specification : AS PER DRAWING
R
Nonestab
6) STEEL BILLETS AS PER OFAJ DRG NO F 555 A FOR CANISTER FORGING[00]()
Specification : AS PER DRAWING
R
Nonestab
7) PARTED STEEL BILLET AS PER DRG NO 629 FOR 120MM PWP[00]()
Specification : AS PER DRAWING
R
Nonestab
8) PARTED STEEL BILLET TO OFAJ DRG NO F 619 AND SPECIFICATION AS PER OFAJ SPECN NO F 531 B[00]()
Specification : S PER OFAJ SPECN.NO.F-531 B
R
Nonestab
9) PARTED STEEL BILLET AS PER OFAJ DRG NO F 561 D AND SPECNAS PER OFAJ F 444 D LATEST ISSUE FOR SHELL 107 HE[00]()
Specification : SPECN.AS PER OFAJ F-444 D
R
Nonestab
10) PARTED STEEL BILLET TO OFAJ DRG NO F 467D and OFAJ DRG SPECN F 345 G FOR 125 MM HE SHELL[00]()
Specification : OFAJ DRG/SPECN F-345 G
R
Nonestab
11) PARTED STEEL BILLET FOR 155 MM IMI SHELL AS PER OFAJ DRG NO F 632[00]()
Specification : PARTED STEEL BILLET FOR 155 MM I.M.I. SHELL AS PER OFAJ DRG NO. F-632
R
Nonestab
Category : p
Grade : 3
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ROUND 56 MM DIA LF NO 0412702056[04]()
Specification : GOST 4543-71
R
Nonestab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021
Description : STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Estab
Category : p
Grade : 3
Size :
M
1) Metal and Steel Factory
Name
Specification
Use
Status
1) ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9515-12- 2001[07]()
Specification : ROLLED & HEAT-TREATED STEEL FLAT IN FINISHED CONDITION TO SIZE 90(+1.0/-0) MM WIDEX17.2 (+0.2/-0) MM THICKX1800.0 (+/-7.5) MM LONG. STEEL SPECN.GOST.B 19032-73.ST.II I-OA. MATL. SHOULD BE PRODUCED FROM VAR/LFVD ROUTE. (EQUIV.ST.GR: JSS: 9
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROUND 30 point 10 MM plus 0point5MM dia TO SPCN 53 x M1 0 TY 14 1 2232 77 and OST B 84 748 81 ANNEALED AND PEELED CONDITION TO 2 point 50 MTRS TO 3 MTRS in straight length rods
Description : STEEL ROUND 30 point 10 MM plus 0point5MM dia TO SPCN 53 x M1 0 TY 14 1 2232 77 and OST B 84 748 81 ANNEALED AND PEELED CONDITION TO 2 point 50 MTRS TO 3 MTRS in straight length rods()
Specification : STEEL ROUND 30.10 MM (+0.5MM/-0.00MM) DIA TO SPCN 53 X M1-0 TY-14-1-2232-77 & OST B 84-748-81, ANNEALED AND PEELED CONDITION TO 2.50 MTRS TO 3.00 MTRS
IN STRAIGHT LENGTH MUST BE SUBJECTED TO 100% INSPECTION USING ULTRASONIC FLAW DETE
R
Estab
Category : p
Grade : 3
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ALLOY TOOL STEEL TO SPECIFICATION AISI H-13 IN FORGED, ANNEALED AND PROOF MACHINED CONDITION[02]()
Specification : AS PER SPECIFICATION AND DRAWING
R
Estab
2) PARTET BILLETS TO OFAJ DRG NO. 602B & 603B[03]()
Specification : AS PER OFAJ SPECN F329M FOR 81 MM BOMB BODY FORGINGS (FRONT & REAR PARTS)
R
Estab
Category : DDP
Grade : I
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021
Description : STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Estab
Category : p
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL BAR 80MM[03]()
Specification : AS PER ASTM A322-91 GRADE 4340
R
Estab
Category : ddp
Grade : Grade I
Size :
M
2122
GAYATRI INDUSTRIES
4, BHAWANI DUTTA LANE BHAWANI DUTTA LANE KOLKATA West Bengal
PIN1 : 700073
Phone No. : 22193394 GSTIN : 19AETPK1623A1ZO
11) SPRING TO CQA A DRG NO BW8 384 007 DC 37271 A DT 08 11 2010[00]()
Specification : SPRING TO CQA(A)DRG.NO.BW8-384-007 DC-37271-A DT.08.11.2010
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) DIAPHRAGM TO OFAJ DRG NO FS 2467 A[00]()
Specification : "DIAPHRAGM"TO OFAJ DRG.NO.FS-2467 A (FOR FUZE M842 FOR AMMN. 20 MM AMR HEI.)
C
Nonestab
2) CUP TO OFAJ DRG NO FS 2457 A[00]()
Specification : CUP TO OFAJ DRG. NO. FS-2457 A.
C
Nonestab
3) OBTURATOR TO OFAJ DRG NO FS 2458 A[00]()
Specification : OBTURATOR TO OFAJ DRG. NO. FS-2458 A
C
Nonestab
4) COVER OF OBTURATOR TO OFAJ DRG NO FS 2456 A[00]()
Specification : COVER OF OBTURATOR TO OFAJ DRG.NO.FS-2456 A
C
Nonestab
5) PACKING RING TO CQA AMMN DRG NO 3 027321 DET 6 DC NO 36651 A DTD 28 2 2000[00]()
Specification : PACKING RING TO CQA(AMMN.) DRG.NO.3-027321 DET-6 DC NO. 36651-A DTD.28.2.2000.
C
Nonestab
6) RING TO CQA AMMN DRG NO 3 027321 DET 25 DC I NO 36050 A DT 5 12 95[00]()
Specification : RING TO CQA(AMMN.) DRG NO. 3-027321 DET-25 DC(I) NO. 36050-A DT. 5-12-95
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) DISC TO CQA AMMN DRG NO QX 336 DC 35434 A DT 30 12 92[00]()
Specification : DISC TO CQA(AMMN) DRG.NO. QX-336, DC-35434-A DT. 30.12.92
C
Nonestab
2) CAP TO CQA AMMN PART NO DRG NO QX 438 DC I 37326 DT 03 12 12 WITHOUT SURFACE TREATMENT AND EMBOSSING[00]()
Specification : CAP TO CQA(AMMN.) PART NO.(DRG.NO.) QX-438 DC(I) 37326-DT.03/12/12 (WITHOUT SURFACE TREATMENT AND EMBOSSING)
C
Nonestab
3) SEPTUM TO CQA AMMN DRG PART NO QX 338 DC 37242 A DT 23 12 2009[00]()
Specification : SEPTUM TO CQA(AMMN) DRG.PART NO.QX-338,DC-37242-A DT:-23/12/2009.
C
Nonestab
4) CLIP TO CQA AMMN PART NO DRG NO QX 439 DC I 35434 A DT 30 12 92 WITHOUT SURFACE TREATMENT[00]()
Specification : CLIP TO CQA(AMMN.) PART NO.(DRG.NO.) QX-439 DC(I)35434-ADT. 30/12/92(WITHOUT SURFACE TREATMENT).
C
Nonestab
5) WASHER TO CQA AMMN PART NO DRG NO QX 123 DC I35434 A DT 30 12 92 WITHOUT SURFACE TREATMENT[00]()
Specification : WASHER TO CQA(AMMN.) PART NO. (DRG.NO.) IQX-123 DC(I35434-A DT. 30/12/92 (WITHOUT SURFACE TREATMENT).
C
Nonestab
6) DETENT SPRING TO CQA A DRG NO IQX 348 DC 36897 ADT 29 04 2003[00]()
Specification : DETENT SPRING TO CQA(A) DRG.NO.IQX-348 DC-36897-ADT.29.04.2003.
C
Nonestab
7) STRIKER SPRING TO CQA A DRG NO IQX 341 DC 36897 A DT 29 042003[00]()
Specification : STRIKER SPRING TO CQA(A) DRG.NO.IQX-341 DC-36897-ADT.29.04.2003
C
Nonestab
8) SHUTTER SPRING TO CQA AMMN DRG NO QX 344 DC 36103 A DATED 29 03 1996[00]()
Specification : SHUTTER SPRING TO CQA(AMMN) DRG.NO.QX-344, DC-36103-A DATED29.03.1996.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) KNIFE KOOKRIE FOR RIFLE 5.56MM INSAS.[70]()
Specification : BLADE-IS:3748-1980 GR 55
CROSSPIECE-BS:1449 PT.1 : 1983 GR-6 S-4
ALTERNATE MATERIAL:-BS5710 PT.:2:1981 GR70 0R IS: 3748:1990 GR 70 T6 HARDNESS:-400-450HV
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) SHIM to Drg No 176- 1165()
Specification : As per Drg. No. 176-1165
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) SHIMS to Drg No 176 -2118()
Specification : As per Drg. No 176-2118
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) SHIMs as per Drg No 176- 8157, 176- 8158, 176- 8159()
Specification : As per Drg No 176-8157, 176-8158 and 176-8159
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER
Description : SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER()
Specification : SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03
C
Estab
2) SPRING CARTRIDGE GUIDE PAWL FOR MAG
Description : SPRING CARTRIDGE GUIDE PAWL FOR MAG()
Specification : PT.NO.69 DS CAT NO 5360-000518 DC(I) NO.27021-SA DT. 8.01.17 IN FINISHED CONDITION.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SPRING 5209544 FOR HEAT-551. (9911357927)[99]()
Specification : 'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.
C
Nonestab
2) O RING LF 9911357860[99]()
Specification : DRG.NO. TRD-1-2-2261
C
Nonestab
3) O RING LF 2013200384[20]()
Specification : DRG.NO. F1301-024240-B DC NO. 36345-A DT. 29/10/97 MATERIAL SPECN: IND/ME/884 (PROV.)
C
Nonestab
4) O RING 67X2 5 MM TO DRG NO 6413251 LF 9911357872[99]()
Specification : DRG.NO. TRD-1-2-2248
C
Nonestab
5) O RING 78X2 LF 2013436144[20]()
Specification : 'O' RING 78X2 (2013436144)
R
Nonestab
6) O RING 30X2 DRG NO TRD 1 2 2276 LF 9911357904[99]()
Specification : "O" RING 30X2 TO DRG.NO.TRD-1-2-2276.
R
Nonestab
7) O RING 37 X 2 4 PART NO 6414441 LF 2013999924[20]()
Specification : O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978
R
Nonestab
8) O RING 67X2 5 PART NO 6413251 LF 2013999907[20]()
Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958
R
Nonestab
9) O RING 28 X 2 6 PART NO 6413250 LF 2013999906[20]()
Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957
R
Nonestab
10) O RING 30X2 PART NO 6413212 LF 2013999901[20]()
Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953
R
Nonestab
11) O RING 71 X 1 8 PART NO 6413211 LF 2013999912[20]()
Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961
R
Nonestab
12) O RING 75 5 X 2 4 PART NO 6413411 LF 2013999922[20]()
Specification : O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977
R
Nonestab
13) O RING 76 X 2 PART NO 450001307 LF 2013999919[20]()
Specification : O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974
R
Nonestab
14) O RING 67 X 2 PART NO 6414120 LF 2013999921[20]()
Specification : O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973
R
Nonestab
15) O RING 29 2 X 2 PART NO 6413414 LF 2013999920[20]()
Specification : O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972
R
Nonestab
16) O RING 61 X 1 6 PART NO 6413412 LF 2013999914[20]()
Specification : O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966
R
Nonestab
17) O RING LF 9911357865[99]()
Specification : "O" RING 71*1.6 DRG.NO.TRD-122259
C
Nonestab
18) O RING LF 9911357868[99]()
Specification : "O" RING 71*1.8 DRG.NO.TRD-122260
C
Nonestab
19) O RING LF 9911357869[99]()
Specification : "O" RING 71*1.65TO DRG.NO.TRD122263
C
Nonestab
20) 3rd SET OF 4 ITEMS FOR MMHG 9911358526[99]()
Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) SUPPORT TO DRG NO BG29032 FOR BG29-4S (LF 7445108203)[74]()
Specification : SUPPORT TO DRG NO BG29032 FOR BG29-4S (LF 7445108203)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) HOLDER TO DRG NO Y7337697 LF NO 7432311010[74]()
Specification : HOLDER TO DRG NO Y7337697 LF NO 7432311010
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) ROLLER LF NO 7440200884[74]()
Specification : ROLLER LF NO 7440200884
C
Nonestab
2) STUD LF NO 7440206698[74]()
Specification : PIN LF NO 7440206698
C
Nonestab
3) FLANGE LF NO 7440206647[74]()
Specification : FLANGE LF NO 7440206647
C
Nonestab
4) GASKET LF NO 7440206696[74]()
Specification : GASKET LF NO 7440206696
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) STOP LF NO 7440200724[74]()
Specification : STOP LF NO 7440200724
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) SLEEVE LF NO 7420212004[74]()
Specification : SLEEVE LF NO 7420212004
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) BOARD AS PER DRG NO AL7.814.335 FOR 1A43-VISOR (LF 7440205842)[74]()
Specification : BOARD AS PER DRG NO AL7.814.335 FOR 1A43-VISOR (LF 7440205842)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) HOLDER TO DRG NO Y-7322254 (LF 9927091140)[99]()
Specification : HOLDER TO DRG NO Y-7322254 (LF 9927091140)
C
Nonestab
2) STRIP TO DRG NO Y-6390502 (LF 7432311011)[74]()
Specification : STRIP TO DRG NO Y-6390502 (LF 7432311011)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) SCREW DRG NO BL8900237 01 LF NO 9927089241[99]()
Specification : SCREW DRG NO BL8900237 01 LF NO 9927089241
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) RING AS PER DRG NO AL8243317 (LF 7440201933)[74]()
Specification : RING AS PER DRG NO AL8243317 (LF 7440201933)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) MOUNT TO DRG NO AF8636709 LF 7432412047[74]()
Specification : MOUNT TO DRG NO AF8636709 (LF 7432412047)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) AXLE TO DRG NO AL8314536 (LF 7440201984)[74]()
Specification : AXLE TO DRG NO AL8314536 (LF 7440201984)
C
Nonestab
2) RING TO NUT LF 7432512007[74]()
Specification : RING TO NUT DRG NO OLF /R&D/TVNE-4B/1PA/144 M1 (LF 7432512007)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) BUTTON LF NO 7440206005[74]()
Specification : BUTTON LF NO 7440206005
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN FIXING BAND BACK SIGHT TO DRG No 29P 0006 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
2) PIN TRIGGER TO DRG NO 29P 0041STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle
C
Nonestab
3) MANUFACTURING AND SUPPLY OF PIN AXIS TRIGGER AND SEAR TO D S CAT NO 5315 009113 D C NO 25060 SA DT 05 7 01 WHITE FINISHED STAGE WITH FIRMS MATERIAL ICR 1220[70]()
Specification : AS PER D.S. CAT NO. 5315 - 009113 D.C. NO. 25060-SA DT. 05-7-01 (WHITE FINISHED STAGE) WITH FIRMS MATERIAL (ICR - 1220)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6121000194 CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5[61]()
Specification : CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6334100728 STEEL MACHINED WASHER FOR PIN[63]()
Specification : IS 2016
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6473200483 O RING (MOD) FOR 155MM ERFB BB[64]()
Specification : SPECN. NO. IND/ME/914
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6173500400 WASHER STEEL ITX 241[61]()
Specification : WASHER (STEEL) TO DRG. PT. NO. ITX 241 DC 35824-A SPECN. IA-1285(B) DC 35203-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113922 WASHER C TO DRG PT NO ISV 1591[65]()
Specification : JSS 8010-63-1991
C
Nonestab
2) 6584113923 WASHER D TO DRG PT NO ISV 1592[65]()
Specification : JSS 8010-63-1991
C
Nonestab
3) 6331800103 WASHER AL DRG PART NO QX 176[63]()
Specification : WASHER (ALUMINIUM) TO DRG. PART NO. QX-176 DC-35781-A.
C
Nonestab
4) 6473200461 WASHER NITRILE TO DRG NO 155 1120[64]()
Specification : WASHER, MAT.:NITRILE BLACK SHORE HARDNESS 80+-5 TO DES.REF. 155-1120 DC NO. 36792-A DT. 01.11.2001 FOR SHELL 155 MM HE BB M1A4.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6504300006 RETAINER[65]()
Specification : RETAINER TO DRG. NO. 9102 00 01 00 01 003 00TB FOR 30 MM GRENADE RUDRA AGS-17
C
Nonestab
2) 6419052036 TRACER NUT TO DTL 36 FOR 125 MM HEAT[64]()
Specification : TRACER NUT TO DRAWING NUMBER 4-025998-036 FOR 125 MM HEAT. DC NO.37003 A DT. 11.03.05.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) WASHER COPPER FOR SHELL 155MM ILLG M1A1[63]()
Specification : DRG NO. 2440A03076
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) RUBBER RING FOR MORTAR BOMB 81MM ILLG 2A[62]()
Specification : CQA(A) 2345 (C)[DRG.NO. ARDE 1965, Det No.25, Part No. ITV 134]
C
Nonestab
2) O RING 61 X 2 MM FOR SHELL 84MM ILLG[62]()
Specification : DRG. NO. F-1301-055320C
C
Nonestab
3) RUBBER RING FOR 84 MM ILLG.[62]()
Specification : RUBBER RING TO DRG.NO.F-1301-047940-D DC 34802 A NATURALRUBBER TO SPECN.IND/ME/728 COMPUND Z-14-C.
C
Nonestab
4) RUBBER WASHER FOR 51MM ILLG.[62]()
Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d)
C
Nonestab
5) WASHER FOR 120MM ILLUG.[63]()
Specification : WASHER TO DRG.NO. ARDE 2011,DET 16 PT NO.ITV-146
Specification : DRG NO ARDE 2064 (DET 6) PT NO ITV 224 SPECN. CQA(A) 2328 (d)
C
Nonestab
3) RUBBER WASHER FOR 51MM ILLG.[62]()
Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]()
Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6410900220 LENS PART DRG. 065/4 FOR 125MM HEAT[64]()
Specification : SPECN. NO. JSS 9330-05
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6192547762 IGNITER SA40 EMPTY ASSY CONSISTING OF BODY CONTAINERTO DRG[61]()
Specification : IGNITER SA40 EMPTY ASSY CONSISTING OF BODY CONTAINERTO DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6419000056 FIBRE RING DTL NO 078 FOR 125MM AMN[64]()
Specification : RING TO DRG. NO. 4-024610 DETAIL NO. 078 DC NO.36608-A FOR125MM AMMUNITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PLUG FOR 81MM AT AL[62]()
Specification : DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994
1) DRIVER SIDE GLASS FOR UPGRADED MPV 4x4 LF NO 9010398098000[90]()
Specification : AS PER ATTACHED SPECIFICATION
C
Nonestab
2) SIDE GLASS UPGRADED MPV 4x4 LF NO 9010398096000[90]()
Specification : AS PER ATTACHED SPECIFICATION
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) BULLET PROOF GLASS 50MM THICK FOR SIDE DOOR CO DIVER SIDE[90]()
Specification : VFJ/TSS/SP/TATA 03
C
Nonestab
2) BULLET PROOF GLASS 50MM THICK FOR SIDE DOOR DRIVER SIDE[90]()
Specification : VFJ/TSS/SP/TATA 03
C
Nonestab
3) BULLET PROOF GLASS 50MM THICK FOR REAR DOOR[90]()
Specification : VFJ/TSS/SP/TATA 03
C
Nonestab
4) BULLET PROOF GLASS 50MM THICK FOR WIND SHIELD[90]()
Specification : VFJ/TSS/SP/TATA 03
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Rear Glass with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
2) Side Glass with gun port hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
3) Windshield Glass with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
4) Driver Side Glass with Gun Port Hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
5) Co Driver Side Glass with Gun Port Hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) BULLET PROOF GLASSES WITH RUBBER BEADING for BP SML LF No 9413100018000[90]()
1) MACHINED BODY FOR RIFLE 5.56MM ASSAULT RIFLE/EX-CALIBUR.[70]()
Specification : BS 970 Pt. 1-1983, 817 M-40 T (BS:970 En24 T)
C
Nonestab
2) STOCK SIDE RIGHT FOR 9MM AUTO PISTOL 1A.[70]()
Specification : MOULDING POWDER, MOULDING PLASTICS (PHENOLIC) TO SPECN. NO. JSS 1097 GRD. 'Z' WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa, OR NYLON 66 GP COLOUR BLACK TO SPECN DEF/STAN 93-8/1 WITHOUT GLASS FIBRE
C
Nonestab
3) BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN.[70]()
Specification : IS:4368-1967 Gd-13. Ni3 Cr80
CASE HARDNESS:-500-550 VPN
CASE DEPTH:-0.6 TO 1mm
C
Nonestab
4) SLIDE REAR SIGHT FOR 30-06 SPORTING RIFLE,[70]()
Specification : BS:970 PT.1 GR 070 M55 OR En-9
TRATMENT:- HRD. & GRD. TO 300-350 H.V.
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BRACKET REAR SIGHT FOR 0.22[70]()
Specification : STEEL BS 970 En19A
C
Nonestab
2) BRACKET REAR SIGHT FOR 30-06 SPORTING RIFLE.[70]()
Specification : BS:970 PT.1 GR 070 M55 OR En-9
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 18C 0035 Sqmm EBXL Cable confirming to EED 50 13 Table C9 Part No 5013 6986[71]()
Specification : 18C x 00.35 Sq.mm Circular Electroplated Annealed Tinned Flexible Copper Wire with Insulation Electron Beam Cross Linked Silicon Rubber Compound, Cores collectively Screened, FR, LSZH EBXL Poliyolefin Sheathed Flexible Cable, Max. Outer D
C
Nonestab
Category : ddp
Grade : Grade I
Size :
M
2131
CENTRAL INSTITUTE OF PLASTIC ENGINEERING AND TECHNOLOGY HALDIA
City Centre, P.O-Debhog, Dist- PurbaMedinipur, Haldia-721657, West Bengal CIPET ROAD HALDIA West Bengal
PIN1 : 721657
Phone No. : 032242554 GSTIN : 19AAAAC06128D
Specification : MODERANT NIOGEN-OEC (OLIGO ETHER ACRYLATE) TY-6-01-450-76 [HIGH GRADE] AS PER RUSSION SPECIFICATION
R
Nonestab
2) Carbon black Type PRINTEX[10]()
Specification : CARBON BLACK TYPE II (PRINTEX 300) SPECN. NO. JSS 6810-081 : 2016, REV.NO.3.
R
Nonestab
3) DI Octyle Pthalate[10]()
Specification : DIOCTYLE PHTHALATE AS PER SPECN.NO. IS 14421:1997 REAFFIRMED -2018. TEST TO BE CARRIED OUT FOR CHARACTERISTICS,1)RELATIVE DENSITY 2)REFRACTIVE INDEX 3)WATER CONTENT 4)ACID VALUE 5) ESTER (SAPHONIFICATION) VALUE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Di Phenyl Amine[10]()
Specification : DIPHENYLAMINE CONFORMING TO SPECIFICATION GOST 194-80
R
Nonestab
2) CARBON BLACK MONARCH 1300[10]()
Specification : CARBON BLACK (MONARCH-1300) SPECIFICATION JSS 6810-81-2010 (REV.NO.3)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Wax Special No 6 Grade I[10]()
Specification : White Colour To Specn.No.CS-5301-B
R
Nonestab
2) Plasticizer Ester type 1 DBP[10]()
Specification : PLASTICIZER ESTER,TYPE-1 (DBP) AS PER SPECIFICATION IS : 14421-1997, Reaffirmed 2018
R
Nonestab
3) Basic Lead Stearate[10]()
Specification : JSS 6810 -145:2017( Revision No 2)
R
Nonestab
4) WAX CERESINE GRADE 80[10]()
Specification : WAX CERESINE GRADE 80(DROP POINT 80 DEGREE C- 85 DEGREE C) CONFIRMING TO SPECN NO. GOST 2488-79.
R
Nonestab
5) CANDELILLA WAX[10]()
Specification : CANDELILLA WAX AS PER SPECN.JSS-NO.9160-08:2016 (REV NO.2). )
R
Nonestab
6) CRUDE BEES WAX[10]()
Specification : CRUDE BEES WAX AS PER SPECIFICATION NO. IS-1504-1996 REAFFIRMED 2014.
R
Nonestab
7) CENTRALITE II[10]()
Specification : CENTRALITE II AS PER SPECIFICATION No.GOST No.2154-77
R
Nonestab
8) TEFLON 4D FORAPC 235P[21]()
Specification : TEFLON-4D, APPEARANCE: SMALL FRIABLE POWDER OF WHITE COLOUR. AS PER SPECIFICATION No. GOST No.14906-77.
R
Nonestab
9) TITANIUM DI OXIDE[10]()
Specification : MASS FRACTION AT LEAST 98% RESIDUE AFTER WET SIEVING ON THE SCREEN MAX. 04.%, MASS FRACTION OF VOLATILE SUBSTANCE MAX. 0.3% AS PER RUSSIAN SPECIFICATION TU 301-10-012-89.
R
Nonestab
10) POLYMETHYL SILOXANE FLUID[10]()
Specification : POLYMETHYL SILOXANE FLUID AS PER SPECIFICATION NO. GOST NO.13032-77
R
Nonestab
11) OIL INDUSTRIAL I 8A BRAND[21]()
Specification : OIL INDUSTRIAL I-8A BRAND, ACIDITY INDEX: MILLIGRAMS KOH PER 1 GRAM OF OIL IS MAX 0.02, OPEN-CUP FLASH TEMPERATURE NOT BELOW:+150 DEGC, MASS FRACTION OF ASH MAX:0.005%, CONTENT OF MECHANICAL AS PER
R
Nonestab
12) PARFFIN WAX SPECIAL HARD GRADE[10]()
Specification : PARAFFIN WAX SPECIAL CONFORMING TO SPECN IS:7401-1987 (FIRST REVISION) HARD GRADE(REAFFIRMED 2016)
R
Nonestab
13) Chemically Precipitated Chalk[25]()
Specification : CHEMICALLY PRECIPITATED CHALK AS PER ATTACHED SPECIFICATION NO. TU 84-07509103.671-2014
R
Nonestab
14) DiButyl Phthalate[10]()
Specification : DIBUTYL PHTHALATE AS PER ATTACHED SPECIFICATION NO. TU 32 E-2015
1) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115
Description : PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115()
Specification : JSS:8135-09:2004
R
Estab
2) PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR
Description : PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR()
Specification : JSS:8135-09:2004
R
Estab
Category : dp
Grade : 1
Size :
L
1) Ammunition Factory Khadki
[Deemed Registration]
Name
Specification
Use
Status
1) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115
Description : PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115()
Specification : JSS:8135-09:2004
R
Estab
2) PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR
Description : PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR()
Specification : JSS:8135-09:2004
R
Estab
Category : dp
Grade : 1
Size :
L
1) Ammunition Factory Khadki
[Deemed Registration]
Name
Specification
Use
Status
1) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115
Description : PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115()
Specification : JSS:8135-09:2004
R
Estab
2) PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR
Description : PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR()
Specification : JSS:8135-09:2004
R
Estab
Category : dp
Grade : 1
Size :
L
1) Ammunition Factory Khadki
[Deemed Registration]
Name
Specification
Use
Status
1) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115
Description : PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115()
Specification : JSS:8135-09:2004
R
Estab
2) PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR
Description : PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR()
Specification : JSS:8135-09:2004
R
Estab
Category : dp
Grade : 1
Size :
L
1) Ammunition Factory Khadki
[Deemed Registration]
Name
Specification
Use
Status
1) PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115
Description : PAPER FOR GUN CRTG.AMMUNITION IN REELS OF 345MM WIDE AND 450 TO 500 MM IN DIAMETER THICKNESS .142 TO .162MM GSM 105 TO 115()
Specification : JSS:8135-09:2004
R
Estab
2) PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR
Description : PAPER FOR CARTRIDGE CASES AMMUNITION IN REELS OF 1092.2 MMWIDE AND 450 MM TO 500 MM DIA IN BROWN COLOUR()
1) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]()
Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT
R
Nonestab
2) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
4) STEEL ROD 29 MM JSS 9510 01 SS C 24 A 0142000029[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
R
Nonestab
5) STEEL STRIP LF 0101060010[01]()
Specification : STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2006 (SIXTH REVISION)GRADE 'A' DESIGNATION Fe-410-WA.STRIPS SHOULD BE PACKED WITHHASSIAN CLOTH DULY COATED WITH RUST PROOF TO AVOID RUST.
R
Nonestab
6) STEEL ROD 3 125MM IS 4431 14C14S14 LF 0112001004[01]()
Specification : STEEL ROD 3.125+/-0.05MM DIA IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS TO SPECN.IS:4431-1978 REAFFIRMED 2004 GRADE 14C14S14 INCOLD DRAWN CONDITION.
R
Nonestab
7) STEEL STRIP 15 X 0 6 MM BSEN 10139 2016 LF 0121060156[01]()
Specification : WORK HARDENED OF SPECIFICATION BS EN 10139:2016
R
Nonestab
8) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025[01]()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
R
Nonestab
9) STEEL ROD 14 5MM IS 4431 14C14S14CD LF 0133001145[01]()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2014)(1st REVESION)GRADE-14C14S14 IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED
R
Nonestab
10) STEEL STRIP 15X1 MM IS 2062 2011 LF 011060010[01]()
Specification : STEEL STRIP 15+/-0.5 MM WIDE x1.00-0.08MM THICK IN HAND COILOF LENGTH 4 TO 6 FEET TO SPECN:IS-2062-2011 (SEVENTH REVISION) GRADE 'A' DESIGNATION E-250(Fe-410-WA).STRIPS SHOULD BE PACKED WITH HASSIAN CLOTH DULY COATED WITH RUST PROOF TO AV
R
Nonestab
11) STEEL STRIP 12 5 X 0 28 MM IS 6911 1992 LF 0323060012[03]()
Specification : STEEL STRIP 12.5 +/- 0.5MM WIDE X 0.28-0.02MM THICK IN FORM OF COILS OF CONTINUOUS LENGTH TO SPECIFICATION IS-6911-2017 (2nd REVISION) AMENDMENT NO. 1 & 2 , Gr X04 Cr 19 Ni 9. EACH COIL WEIGHT 5-10 KG
R
Nonestab
12) STEEL STRIP 90X2MM IS 513 BS1449 LF 0101061544[01]()
Specification : STEEL STRIP 90+/-0.5mm WIDE X 2mm THICK TO SPECN-IS-513-2008(FIFTH REV.)GRD. DD OR EDD IN ANNEALED/SKIN PASSED CONDITIONOR BS-1449 Pt-I GR. 1 OR 2 OR 3 (CR/CS) IN ANNEALED/SKINPASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN(HR/
R
Nonestab
13) WIRE STEEL SPRING 1 25MM IS4454 DM LF 018315906[01]()
Specification : WIRE STEEL SPRING 1.25(+/-0.02)MM DIA IN COIL TO SPECIFICATION IS: 4454(PT-1)2001 (THIRD REVISION)GRADE: DM OR SM.
R
Nonestab
14) WIRE STEEL SPRING 1 25 MM IS 4454 DM LF 0183015906[01]()
Specification : WIRE STEEL SPRING 1.25(+/-0.02)MM DIA IN COIL TO SPECIFICATION IS: 4454(PT-1)2001 (THIRD REVISION)GRADE: DM OR SM.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) STEEL BAR TO SPECN NO IS 4431 DASH 78 DESIGNATION 14C 14S14 BRAKET C D BRACKET CLOSE IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22 DASH ZERO POINT 052 MM DIA
Description : STEEL BAR TO SPECN NO IS 4431 DASH 78 DESIGNATION 14C 14S14 BRAKET C D BRACKET CLOSE IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22 DASH ZERO POINT 052 MM DIA()
Specification : STEEL BAR TO SPECN NO IS: 4431- 78 DESIGNATION 14C 14S14 (C/ D) IN STRAIGHT LENGTH OF 2 TO 3 MTRS SIZE 22.00- 0.052 MM DIA
R
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) MS PLATE 1MX1MX20MM SPECN IS 226 LF 0133021021[01]()
Specification : MILD STEEL PLATE SIZE 1M X 1M X 20MM THICK TO SPECN.IS:226
Specification : STEEL STRIP SIZE 40 +/-0.5 MM WIDE X 0.35 +/-0.03 MM THICK TO SPECN:IS-513-2008 (FIFTH REVISION) GR.CR-3 OR GD I CS OFBS-1449-SECTION 1.1:1991 QUALITY IN ANNEALED AND SKIN PASSED CONDITION IN COIL OF 50 KG WEIGHT EACH.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL STRIP 85X2 0MM IS 513 BS1449 LF 0101061530[01]()
Specification : STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) CON
R
Nonestab
2) STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165[01]()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STEEL TAPE BAND 12.7X0.45MM (ITEM CODE-0133060104)[01]()
Specification : COLD ROLLED STEEL STRIP (STEEL TAPE BANDING) 12.7 MM WIDTH X 0.45MM THICK(26SWG) IN C.R.STEEL STRIPPING SOFT BLUE FINISHHAVE TENSILE STRENGTH 60 TO 80KG/MM SQR WITH SHEAR EDGE IN COIL,OILED WITH SHELL EXISTS 256 WITH WAXED PAPER AND RESI
Specification : MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CARBON STEEL GROUND ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN HOT ROLLED COLD DRAWN CONDITION OR BS 970PT I 1983 GRADE 212M36 IN R COND SIZE 30 MINUS 0 POINT 052 MM DIA[00]()
Specification : CARBON STEEL GROUND ROUND BARS TO SPECN. BS:970 PT.I(1983)GRADE 080M40 IN HOT ROLLED +COLD DRAWN CONDITION OR BS:970PT.I(1983) GRADE 212M36 IN "R"COND.IN STRAIGHT LENGTH OF 1.5TO 2 METERS TO SIZE 30.00 -0.052 MM DIA HAVING STRAIGHTNESSLES
R
Estab
2) NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN BS 970PT I 1983 GRADE 080M40 HAVING GRAIN SIZE 5 TO 8 IZOD IMPACT VALUE 20 POINT 340 NM MIN SIZE 41 MINUS 0 POINT 1 MM DIA[00]()
Specification : NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970PT-I-1983,GRADE 080M40 HAVING GRAIN SIZE 5 TO 8,IZOD IMPACT VALUE 20.340 NM MIN.IN STRAIGHT LENGTH OF 2 MTRS. 15% SHORTSDOWN TO 1.5 TO 2.0 METRES. PERMITTED SIZE:41.00 - 0.1 MM D
R
Estab
3) NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS 970 PT I 1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES SIZE 21MINUS 0POINT1MM DIA[00]()
Specification : NORMALISED AND PEELED CARBON STEEL ROUND BARS TO SPECN BS:970-PT-I-1983 GRADE 080M40 IN STRAIGHT LENGTH OF 2 TO 3METRES,SIZE:21.00 - 0.1MM DIA. (10 % MAX.SHORT LENGTH OF 1.5 METRE ALLOWED.)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CARBON STEEL BRIGHT ROUNDS TO SPECN BS 970 PT I 1983 GRADE 080M40 CONDITION NORMALIZED IN STRAIGHT LENGTH OF 3 METERS WITH 10PERCENT SHORTS DOWN TO 2 3 METERS SIZE 35 0 POINT1 MM DIA[00]()
Specification : CARBON STEEL BRIGHT ROUNDS TO SPECN BS: 970 PT.I-1983 GRADE 080M40 CONDITION NORMALIZED IN STRAIGHT LENGTH OF 3 METERS WITH 10% SHORTS DOWN TO 2-3 METERS SIZE: 35.00 – 0.1 MM DIA
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) STEEL ROD 7 MM IS 1875 GRD 20C8 LF 0101003008
Description : STEEL ROD 7 MM IS 1875 GRD 20C8 LF 0101003008()
Specification : STEEL ROD 7(+0.025,-0.075)MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN.IS:1875-1992 (REAFFIRMED-2004)(FIFTH -REVISION)AMENDMENT NO.1 JAN.1993 AND AMENDMENT NO.2 NOV.1994GRADE 20C8.
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[03]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SHELL 105MM IFG HE A/L FORGED STEEL[62]()
Specification : SHELL 105MM IFG HE A/L FORGED STEEL TO DRG.PART NO.ISX-46GE SHEET-1 DC NO. 37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14.
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SHELL BODY WITH DRIVING BAND 107 TO DRG NO 3060202 DC 36490 A DTD19 11 1998[62]()
Specification : SHELL BODY WITH DRIVING BAND 107 TO DRG.NO. 3060202, DC:36490-A DTD.19.11.1998 AND SURFACE TREATED AS PER DRG.NO.3060203 DC-36490-A DTD.19.11.1998,EXTERNALLY PAINTED AS PER DRG NO. 6374 058 DC NO. 37586-A DT. 22.07.21 WITH PAINT RFU FINIS
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
