List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2001 MSC ENTERPRISES
S 4/1, T-Block, Near Post Office MIDC Bhosari Pune Maharashtra
PIN1 : 411026
Phone No. : 02027120034
GSTIN : 27ABFPC8086N1Z5 		NGPM06699A

Download 		1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PRF YDB 60 NASK 998 PROV() Specification : DRG. NO. NASK 998 (PROV) DATED 31/12/2012 R Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) A S ROCKET RGB 60 EMPTY Description : A S ROCKET RGB 60 EMPTY() Specification : DRG. NO. NASK 1061 (PROV) E Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]() Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]() Specification : IS:2062 (GRADE E 250A C Nonestab
2) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE[63]() Specification : MS TARGET BLOCK FOR PROOF OF 30 MM SHAPED CHARGE (SIZE DIA300 MM X 100 MM) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF09/2008, MATERIAL SPECN. IS-2062:1999. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6333501102 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236 R Nonestab
2) 6333501101 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235 R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) ASSY CENTRE CONTACT FOR RGB -60[14]() Specification : AS PER DRAWINGS C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) Liner for RGB[01]() Specification : LINER FOR RGB 60 DRG.NO.NASK 1062/3.L.F.NO.0126701684 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]() Specification : AS PER DRAWING. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF PYRO SQUIB OPERATOR II-253ME[6099990159]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) COMPONENTS FOR PYRO CTG YDP 4-2[60]() Specification : DRG. NO. NASK 1016 ( PROVISIONAL ) C Nonestab
2) SET OF COMPONENTS FOR PYRO CARTRG.[60]() Specification : DRG ERDL 898 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG REPRESENTING FUZE DA5A[63]() Specification : DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTG.YDP 3-3 DRG.NASK 995.[60]() Specification : DRG. NO. NASK 995 (PROV) DT.02.12.2008 C Nonestab
2) PYRO CARTG.YDP 1-3 DRG.NAI(MB)9553[60]() Specification : DRG. NO. NASK 994 (PROV) DT.03-07-2008 R Nonestab
3) SET OF COMPONENTS FOR PYRO CARTRG.[60]() Specification : DRG ERDL 898 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY FOR PYRO CARTG PP9 PC[60]() Specification : DRG, NO. NASK 855/1 (PROVISIONAL) C Nonestab
2) BODY TO DRG.ERDL 959 DET NO.1[99]() Specification : DRG.NO.ERDL DRG. 959 DET NO.1 DT.11 NOV 86 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BODY PROJECTILE[60]() Specification : CQA[A] SEALED DRG NO. 04-749-130222- 01.1E C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENTS FOR MRP DETONATOR[60]() Specification : 1) SQULB PLUG BRIDGED - NASK 1056/4 (PROVISIONAL)DT.4.2.2009 2) SLEEVE - NASK 1056/2 (PROVISIONAL)DT. 4.2.2009 3) PROTECTIVE CAP & PIN FOR DET.NAI(P) 501 (PROV) & 502 (PROV) DT.18-09-2014 C Nonestab
2) BOLT AMMN NO1 MK1(COX GUN AMMN)[60]() Specification : ARDE / SPEC / 182 / 1976 - (PART-1) ( REVD JUL 97) C Nonestab
3) SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR PYROJACK DRG NO. PTA-L-52-01-01-001-X[99]() Specification : DRG NO. PTA-L-52-01-01-001-X DT. 08-05-2001 13 COMPONENTS AS PER LIST ENCLOSED C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENTS FOR CAP ELECTRIC BRIDGE 6099999090[60]() Specification : HEMRL/SPECN/346A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG REPRESENTING FUZE FOR 40MM LOW[60]() Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF PYRO SQUIB OPERATOR II-253ME[60]() Specification : DRG .NO. NASK--- 1089/1 (PROV.) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PYRO CARTRIDGE YDP 1 2 ASSY EMPTY[60]() Specification : DRG. NO. NASK 1015 (PROV) DT. 04.12.2009 R Nonestab
2) LUG DRG NO NAI P SK 400[60]() Specification : DRG.NO. NAI (P) -SK 400/10/3 DT. 05.10.2018 R Nonestab
3) PLUG REPRESENTING FUZE T AND P NASK 991[60]() Specification : DRG. NO. NASK 991 DT. 19-08-2013 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB BODY ASSY FOR 250KG PRE FRAG LF 9911358290[99]() Specification : BOMB BODY ASSEMBLY TO DRG. NO. ARDE 08040001030000000PB DT.14/05/2015. E Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086[99]() Specification : SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PC & CONSISTING OF 29 COMPONENTS AND TO ARDESPECIFICATION NO.ARDE/SPECN/668 DATE DEC'2007 REV.3 DATE NOV.2015 FOR PRE-FRAG 100-120KG E Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) PRE-FRAG MODULE ASSEMBLY.[99]() Specification : PRE-FRAG MODULE ASSEMBLY TO DRG.NO.ARDE 08040001040000000PB, DT.14/05/2015 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-12 (FILLED) TO DRG. NO. ODC/AFK-096-15[65]() Specification : DRG. NO. ODC/AFK-096-15 C Nonestab
2) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-60 (FILLED), TO DRG. NO. ODC/AFK-086-15[65]() Specification : DRG. NO. ODC/AFK-086-15 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-12 (FILLED) TO DRG. NO. ODC/AFK-096-15[65]() Specification : DRG. NO. ODC/AFK-096-15 C Nonestab
2) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-60 (FILLED), TO DRG. NO. ODC/AFK-086-15[65]() Specification : DRG. NO. ODC/AFK-086-15 C Nonestab
3) DUMMY - LRCR & MRCR (AASEMBLED) AS PER DRG. NO. NASK 975 (PROV.) WITH SPARE BULB 24 VDC[61]() Specification : DRG. NO. NASK 975 (PROV.) C Nonestab
4) 105 MM LRIR EMPTY ASSEMBLED AS PER DRG.NO. NASK 987 DT.20.04 .15 WITH ALL COMPONENTS AS PER RELEVANT / CONNECTED NASK DRG EXCEPT PROPELLANT, IGNITER, SAND & PITCH SHT. 1[61]() Specification : DRG.NO. NASK 987 DT.20.04 .15 C Nonestab
5) 105 MM MRIR EMPTY ASSEMBLED AS PER NASK DRG.NO.989 WITH ALL COMPONENTS AS PER RELEVANT/CONNECTED NASK DRG EXCEPT PROPELLANT, IGNITER, SAND AND PITCH DRG. DT. 20.04.15 DRG. NO. NASK-989 (p) SHT. 1 DT.20.04.2015[61]() Specification : DRG. NO. NASK DRG.NO.989 C Nonestab
6) 105MM LONG RANGE CHAFF ROCKET ( LRCR )(ASSEMBLED EMPTY) TO DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015.[93]() Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015. C Nonestab
7) 105MM MEDIUM RANGE CHAFF ROCKET (MRCR) (ASSEMBLD EMPTY) TO DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 .[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
8) SRCR (EMPTY) (TYPE E, C & H) DRG NO. NASK 828/1.( PROV ) DT.27.7.2000.[60]() Specification : DRG NO. NASK 828/1.( PROV ) DT.27.7.2000 C Nonestab
9) SRCR-DUMMY TO DRG.NO. NASK/974 (PROV) (ASSEMBLED) WITH SPARE BULB 12 VDC DT. 07.09.2011[61]() Specification : DRG.NO. NASK/974 (PROV) (ASSEMBLED) C Nonestab
10) SRIR (EMPTY) (TYPE E, C & H) TO DRG.NO. NASK 990/1 (PROV) DT. 07.09.2011[61]() Specification : DRG.NO. NASK 990/1 (PROV) DT. 07.09.2011 C Nonestab
11) PLUG FIRING REPRESENTATING FUZE - K3M AS PER DRG. NO. NASK 997 (PROV)[60]() Specification : DRG. NO. NASK 997 (PROV) C Nonestab
12) PLUG FIRING REPRESENTING FUZE YDB-60 TO DRG. NO. NAI(P) SKETCH 360 DATED 22/11/2012.[60]() Specification : NAI(P) SKETCH 360 DATED 22/11/2012 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FRAGMENTATION SLEEVE FOR ROUND 40MM[60]() Specification : DRG. NO. AFK-SK 208/05 SHT.1 & 2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SLEEVE W/O SERRATION FOR 40MM MGL[60]() Specification : DRG. NO. AFK/SK-214/05. DT. 27.01.2015 C Nonestab
2) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SINGLE PROJECTILE FOR 40MM PRACTICE[60]() Specification : SINGLE PROJECTILE FOR 40MM PRACTICE MK-II & PROOF MK-II AS PER SPECIFICATION NO. AFK/SPECIFICATION NO. 68 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) SIGNAL FLARE (ASSY) FOR INDIAN NAVY[99]() Specification : DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NA C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) PLUG FIRING REPRESENTATING FUZE - K3M AS PER DRG. NO. NASK 997[60]() Specification : AS PER DGNAI SPECIFICATION R Nonestab
2) SHORT RANGE CHAFF ROCKET (SRCR) (EMPTY) (TYPE E, C & H) DRG NO. NASK 828/1 [60]() Specification : AS PER DGNAI SPECIFICATION R Nonestab
3) SRCR-DUMMY TO DRG.NO. NASK/974 (PROV) (ASSEMBLED) WITH SPARE BULB 12 VDC[61]() Specification : DRG.NO. NASK/974 R Nonestab
4) 105 MM LONG RANGE INERT ROCKET (LRIR) EMPTY ASSEMBLED AS PER DRG.NO. NASK 987[61]() Specification : DRG.NO. NASK 987 R Nonestab
5) 105 MM LRCR (ASSEMBLED EMPTY) TO DRG. NO. NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.30.04.2009.[93]() Specification : DRG.NO.NASK 760 R Nonestab
Category : p
Grade : Grade II
Size :
2002 HUSTON(INDIA) PVT. LTD.
96/1 Deshpran Sasmal Road KADAMTALLA HOWRAH West Bengal
PIN1 : 711101
Phone No. : 26424425
GSTIN : 19AAACH8563L1Z1 		AAACH8563L

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) REAR BORE SIGHT PROCESS DRAWING (CASTING) TO DRG. NO IRCL 595[71]() Specification : AS PER DRAWING C Nonestab
2) PRECISION CASTING FOR EXTRACTOR TO DRG. NO- C-2318 A[71]() Specification : AS PER DRAWING C Nonestab
3) PRECISION CASTING OF SAFETY CATCH TO DRG. NO. IRCL 561[71]() Specification : AS PER DRG C Nonestab
4) PRECISION CASTING FOR SAFETY LOCK WITHOUT NICKEL PLATING TO DRG.NO.:C-2091-B DT.04.12.01)[70]() Specification : PRECISION CASTING FOR SAFETY LOCK WITHOUT NICKEL PLATING TO DRG.NO.:C-2091-B DT.04.12.01) R Nonestab
5) VENTURI FASTENING STRAP BLANK(CASTING) TO DRG. NO. GF-215194R[71]() Specification : VENTURI FASTENING STRAP BLANK(CASTING) TO DRG. NO. GF-215194R R Nonestab
6) FRONT BORE SIGHT BLANK(CASTING) TO DRG. NO.F1312-15671B[71]() Specification : FRONT BORE SIGHT BLANK(CASTING) TO DRG. NO.F1312-15671B R Nonestab
7) CASTING OF CARRIAGE BED TO DRG. NO: AK-630 102-47[72]() Specification : AS PER DRG. AND SPECN. C Nonestab
8) BOLT CASTING TO DRG. NO. F-1312-190260 DC(I) 18834-W[71]() Specification : AS PER DRAWING C Nonestab
9) STEEL CASTING FOR ARC TO STORE DRG. NO. 301470[70]() Specification : AS PER DRAWING R Nonestab
10) CASTING OF CRADLE TO DRG. NO . AK-630 101-25[72]() Specification : AS PER DRAWING C Nonestab
11) RECEIVER INVESTMENT CASTING TO DRG NO C 2272 D[70]() Specification : AS PER DRAWING C Nonestab
12) PRECISION CASTING OF HOUSING LEVER SEAR TO DRG NO CTC 0023A[70]() Specification : AS PER DRAWING R Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) PRECISION CASTING OF SAFETY CATCH TO DRG. NO. IRCL 561[71]() Specification : AS PER DRG C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) PRECISION CASTING FOR SAFETY LOCK WITHOUT NICKEL PLATING TO DRG.NO.:C-2091-B DT.04.12.01)[70]() Specification : PRECISION CASTING FOR SAFETY LOCK WITHOUT NICKEL PLATING TO DRG.NO.:C-2091-B DT.04.12.01) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BOLT CASTING TO DRG. NO. F-1312-190260 DC(I) 18834-W[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) CASTING OF CARRIAGE TO DRG. NO. AK-630 102-47[72]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) VENTURI FASTENING STRAP BLANK(CASTING) TO DRG. NO. GF-215194R[71]() Specification : VENTURI FASTENING STRAP BLANK(CASTING) TO DRG. NO. GF-215194R R Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FRONT BORE SIGHT BLANK(CASTING) TO DRG. NO.F1312-15671B[71]() Specification : FRONT BORE SIGHT BLANK(CASTING) TO DRG. NO.F1312-15671B R Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) REAR BORE SIGHT PROCESS DRAWING (CASTING) TO DRG. NO IRCL 595[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) PRECISION CASTING FOR EXTRACTOR TO DRG. NO- C-2318 A[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) STEEL CASTING FOR ARC TO STONE DRG. NO. 3014740[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) CASTING OF CRADLE TO DRG. NO . AK-630 101-25[72]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) I.C.BRACKET LIGHTER FOR 5.56MM ASAULT RIFLE DRG. NO. RFI/SK. 9852[79]() Specification : I.C.BRACKET LIGHTER FOR 5.56MM ASAULT RIFLE DRG. NO. RFI/SK. 9852 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) I.C.BRACKET LIGHTER FOR 5.56MM ASAULT RIFLE DRG. NO. RFI/SK. 9852[79]() Specification : I.C.BRACKET LIGHTER FOR 5.56MM ASAULT RIFLE DRG. NO. RFI/SK. 9852 C Nonestab
2) INVESTMENT CASTING OF GUARD TRIGGER[70]() Specification : INVESTMENT CASTING OF GUARD TRIGGER TO RFI SK.NO.4312*12(LATEST DC.04/003/05 DT.17/02/05).FOR .315" SPORTING RIFLE C Nonestab
3) ROTATING ADAPTER FOR BIPOD ASSY[70]() Specification : ROTATING ADAPTER FOR BIPOD ASSY (DRG.NO.-ODC/RFI.SK.0055)WITH 9-13 INCH TILT ADJUSTMENT SMOOTH LEG BIPOD FOR 7.62SNIPER RIFLE.DETAILS AS PER ENCLOSURE. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) IC FOR BLOCK LOCATING TO DRG NO. TEND 2212*3[70]() Specification : AS PER DRAWING. C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) IC CROSS BOLT HOOK LATCH AS PER DRG NO: K-IC-4004[70]() Specification : AS PER DRG NO: K-IC-4004 C Estab
2) IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007[70]() Specification : IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007 C Estab
3) IC PISTOL GRIP BASE AS PER DRG NO K-IC-1106[70]() Specification : AS PER DRG NO K-IC-1106 C Estab
4) IC RETAINER AS PER DRG NO: K-IC-2091. (LF.No.7024020910)[70]() Specification : AS PER DRG NO: K-IC-2091. (LF.No.7024020910) C Estab
5) IC LOCK LOWER HAND GUARD BAND[70]() Specification : IC LOCK LOWER HAND GUARD BAND C Estab
6) INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)[70]() Specification : AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*) C Estab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) BRACKET-CASTING 172.01.735/C (9001735000)[90]() Specification : BRACKET-CASTING TO DRG.NO.172.01.735/C C Nonestab
2) CASTING DRUM BRAKE ILG-2003 (3420030000)[34]() Specification : STEEL CASTING OF DRUM BRAKE TO DESIGN NO.ILG-2003, DS CAT NO 2530-003226 SHT 2 C Nonestab
3) CASTING FOR BACK GUARD (9010962000)[90]() Specification : CASTING FOR BACK GUARD TO DRG.NO.2A46M.109-62 C Nonestab
4) CASTG.FOR TRAIL SPADE 3051623 (1603051623)[16]() Specification : MFR.OF STEEL CASTING OF TRAIL SPADE FOR 155 MM X 39/45 CAL; FH GUN DRG.NO. 3051623 NC/TC NO.140A C Nonestab
5) CASTING FOR BRACKET MEG..183-2 (8200054183)[82]() Specification : CASTING FOR BRACKET TO DRG.NO. MEG-54-04-183-2 C Nonestab
6) STL CASTING OF FORK 172.94.002 (7200094002)[72]() Specification : STEEL CASTING OF FORK TO DRG.NO. 172-94-002. C Nonestab
Category : ddp
Grade : Grade II
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.[70]() Specification : INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG[70]() Specification : INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING FOR HING COVER FOR RIFLE 5.56MM INSAS[79]() Specification :RFI SK NO - 6097*12 C Nonestab
2) INVESTMENT CASTING OF BODY FOR 12 BORE PAG.[70]() Specification : RFI SK NO.- 9776 C Nonestab
3) INVESTMENT CASTING OF BRACKET(WITH HEAT TREATMENT) FOR RIFLE 5.56MM.INSAS.[70]() Specification : RFI SK. NO. 6756*3 C Nonestab
4) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]() Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN C Nonestab
5) INVESTMENT CASTING OF CONNECTOR BUTT EXR. OF RIFLE 5.56MM EXCALIBUR MK-1 [70]() Specification :RFI SK NO. 7596. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) I/C CATCH SAFETY[70]() Specification : INVESTMENT CASTING FOR CATCH SAFETY TO RFI.SK.NO. 3571*3FOR PISTOL AUTO 9MM 1A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG[70]() Specification : INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) I.C. PIN ARM[70]() Specification : INVESTMENT CASTING FOR PIN ARM TO RFI SK.NO.3568*3(DC-02/02/13).FOR PISTOL AUTO 9MM 1A. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) I/C CUP for 7.62mm Assault Rifle Ghaatak.[70]() Specification : I/C CUP for 7.62mm Assault Rifle Ghaatak. as per Drawing No. RFI SK No. 9835. C Nonestab
Category : p
Grade : Grade III
Size : S
1) Rifle Factory Ishapur
Name Specification Use Status
1) I/C FOR TRIGGER[70]() Specification : INVESTMENT CASTING FOR TRIGGER AS PER RFI SK.3651*3 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007[70]() Specification : IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007 C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) INV.CASTING TO DRG.NO.62C 1214 250 E 3 HANDLE BASE BARREL (A 1214) FOR 12.7 MM AD GUN.[70]() Specification : AS PER DRG OF "INV.CASTING TO DRG.NO.62C 1214 250 E 3 HANDLE BASE BARREL (A 1214) FOR 12.7 MM AD GUN. " C Estab
2) INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER " C Nonestab
3) INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER. " C Nonestab
4) CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12.7 MM AD GUN (A 2212)[70]() Specification : AS PER DRG OF "CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12.7 MM AD GUN (A 2212) " C Nonestab
5) INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT " C Nonestab
6) INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN.[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN. " C Nonestab
7) INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN. " C Nonestab
8) INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN.[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN. " C Nonestab
9) INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025) " C Nonestab
10) INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022)[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022) " C Nonestab
11) INVESTMENT CASTING TO DRG.No.: 62C 7016 250 F3 FOR TRIGGER.[70]() Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 62C 7016 250 F3 FOR TRIGGER. C Nonestab
12) INVESTMENT CASTING TO DRG. NO. 62C 5013 250 E3 PAWL BELT HOLDING FOR 12.7 A.D. GUN ( A 5013)[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG. NO. 62C 5013 250 E3 PAWL BELT HOLDING FOR 12.7 A.D. GUN ( A 5013)" C Nonestab
13) INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3. FOR HOUSING EJECTOR.[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3. FOR HOUSING EJECTOR." C Nonestab
14) INVESTMENT CASTING TO DRG. NO. 62C 7102 250 F3 FOR SIGHT BED BODY TRIGGER MECHANISM (A7102) DSCAT No.1005-007167[70]() Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG. NO. 62C 7102 250 F3 FOR SIGHT BED BODY TRIGGER MECHANISM (A7102) DSCAT No.1005-007167" C Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) PZM Nozzle Casting Cum Machining Left & Right() Specification : ERDL. DRG NO. 1040 DET-1 & ERDL.DRG. NO.1040 DET-2 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) IC OF BRACKET CARRYING HANDLE DRG No. 752*2[01]() Specification : AS PER DRG.SKM-752*2 C Nonestab
2) IC KNOB REGULATOR DRG No. SKM 754*2[02]() Specification : AS PER DRG. C Nonestab
3) BODY I.C. of REVOLVER MK III DRG NO. SK-5375R*3[04]() Specification : AS PER DRG SK-5375R*3 D.A. NO. 35/08 DT. 12 05 08 C Nonestab
4) INVESTMENT CASTING TO DRG. NO.SK-3665* REQUIRED FOR REVOLVER SHIELD D.A. NO. 35/04 DT. 09-04-04[01]() Specification : AS PER DRG. C Nonestab
5) Investment Casting for Catch Magazine Drg. No. SK-3527[03]() Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE C Nonestab
6) IC FEED ARM SKM-769*2[04]() Specification : I.C FEED ARM TO DRG.NO.SKM-769*2 C Nonestab
7) PLATE BODY (IC) OF REV MK-III[01]() Specification : PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1 C Nonestab
8) HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1[01]() Specification : HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1, C Nonestab
9) Steel Investment Casting for CAP to DRG No. SK-3870*2[01]() Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1 C Nonestab
10) Investment Casting to DRG No. SK-3713*1 for Guard Back Sight[01]() Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight C Nonestab
11) INVESTMENT CASTING FOR LEVER LOCKING TO DRG. NO.SK-3715*[01]() Specification : As per Drg. C Nonestab
12) INVESTMENT CASTING FOR BLOCK TOP TO DRG. NO.SK-3868*.[01]() Specification : As per DRG. C Nonestab
13) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09[01]() Specification : AS PER DRG. C Nonestab
14) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10[01]() Specification : AS PER DRG. C Nonestab
15) INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE[01]() Specification : AS PER DRG. C Nonestab
16) I.C BODY COCKING SLIDE SKM-738*3[01]() Specification : AS PER DRG. C Nonestab
17) I.C. PAWL FEED FRONT DRG.NO.SKM-740*2[01]() Specification : AS PER DRG. C Nonestab
18) INVESTMENT CASTING TO DRG NO.SKM-775*1 FOR STOP CARTRIDGE OF MAG 7.62MM[01]() Specification : AS PER DRG. C Nonestab
19) I.C. of Cocking Bracket for JVPC DRG. No. SK JVPC-598[70]() Specification : AS PER DRG. C Nonestab
Category : p
Grade : Grade II
Size : S
1) Small Arms Factory
Name Specification Use Status
1) HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1[01]() Specification : HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1, R Nonestab
Category : p
Grade : Grade II
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FOUR TYPES OF CASTING[02] 1(a) Sand Castings/172 TY-4,GOST 977-88 1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73 2.Investment Castings/172 TY-10, GOST 977-88 3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75 4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade III
Size : S
2003 REFORM TOOLS PVT LTD
225 D A J C BOSE ROAD A J C BOSE ROAD KOLKATA West Bengal
PIN1 : 700020
Phone No. : 23025154
GSTIN : 19AABCR6639J1ZX 		CALR04196D

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) MOTOR DPR LF NO 7441120443[74]() Specification : MOTOR DPR-42-N1-03 Drg No.OST160515007.74 MOTOR DPR-42-N1-03 AS PER DRG. NO.OST160515007.74 C Nonestab
2) MOTOR DPM LF NO 9001120758[90]() Specification : MOTOR DPM 25-N1-01 MOTOR DPM 25-N1-01 SPCN NO OST 160.515.022-76 C Nonestab
3) CAP K10 LF 7440200689[74]() Specification : CAP K10-43A-MPO-100PF +/-2% Drg No.OZHO460165TU CAPACITOR K10-43A-MPO-100PF+/- 2% AS PER SPECN. NO. OZHO460165TU C Nonestab
4) CAP LF 7441120476[74]() Specification : CAP. TANTA. AXIAL 16V,4.7MF Drg No.OZHO464044TU CAPACITOR TANTALUM AXIAL 16V,4 .7MF +/-20% AS PER JSS-50205 C Nonestab
5) CAP LF 7441120477[74]() Specification : CAP. TANTA. AXIAL 16V,6.8MF CAPACITOR TANTALUM AXIAL 16V,6 .8MF +/-20% AS PER JSS-50205 C Nonestab
6) TRANSISTOR 2T830G LF 7441121778[74]() Specification : TRANSISTOR 2T830G Drg No.AAO.339.139 TY TRANSISTOR 2T830G AS PER SPECN . NO. AAO.339.139 TY C Nonestab
7) CAPACITOR LF 7441121796[74]() Specification : CAPACITOR K53-1A-20V-47MF Drg No.OZO.464.044TU CAPACITOR K53-1A-20V-47MF +/- 20%-V AS PER SPECN. NO. OZO.464.044 TU C Nonestab
8) CAPACITOR LF 7441121798[74]() Specification : CAPACITOR K73-16-63V-0.15MF Drg No.OZO.461.108TU CAPACITOR K73-16-63V-0.15MF+/- 10%-V AS PER SPECN. NO. OZO.461.108 TY C Nonestab
9) CAPACITOR LF 7441121812[74]() Specification : CAPACITOR K10-17B-M47-1000PF Drg No.OZO.460.107 TU CAPACITOR K10-17B-M47-1000PF+/ -5% AS PER SPECN. NO. OZO.460.107 C Nonestab
10) CAPACITOR LF 7441121814[74]() Specification : CAPACITOR K10-17B-M47-4700PF Drg No.OZO.460.107 TU CAPACITOR K10-17B-M47-4700PF+/ -10% AS PER SPECN. NO. OZO.460.107 C Nonestab
11) CAPACITOR LF 7441121886[74]() Specification : CAPACITOR K53-18-6.3V-100 MKF CAPACITOR K53-18-6.3V-100 MKF+ /-20%-V AS PER SPECN. NO. OZO.464.136 TY C Nonestab
12) CAPACITOR LF 7441121887[74]() Specification : CAPACITOR K10-17B-N90-0,15MKF Drg No.OZO.460.107 TY CAPACITOR K10-17B-N90-0,15MKF AS PER SPECN. NO. OZO.460.107 TY C Nonestab
13) CAPACTOR LF 7441121888[74]() Specification : CAPACTOR K53-18-20V-47MKF+/-20 Drg No.OZO.464.136 TY CAPACTOR K53-18-20V-47MKF+/-20 %-V AS PER SPECN. NO. OZO.464.136 C Nonestab
14) CAPACITOR LF 7441121909[74]() Specification : CAPACITOR K10-17A-N90-0.1 MKF Drg No.OZHO.460.107 TY CAPACITOR K10-17A-N90-0.1 MKF- V AS PER SPECN. NO. OZHO.460.10 C Nonestab
15) CAPACITOR LF 7441121910[74]() Specification : CAPACITOR K10-17A-N90-0.22 MKF Drg No.OZHO.460.107 TY CAPACITOR K10-17A-N90-0.22 MKF -V AS PER SPECN. NO. OZHO.460.10 C Nonestab
16) CAPACITOR LF 7441121914[74]() Specification : CAPACITOR K53-4A-16V-6.8 MKF Drg No.OZHO.464.149 TY CAPACITOR K53-4A-16V-6.8 MKF + /-20%-V AS PER SPECN. NO. OZHO.464.14 C Nonestab
17) CAPACITOR LF 7441121918[74]() Specification : CAPACITOR K73-16-63V-0.56 MKF Drg No.OZHO.461.108 TY CAPACITOR K73-16-63V-0.56 MKF +/-5%-V AS PER SPECN. NO. OZHO.461.10 C Nonestab
18) CAPACITOR LF 7441122083[74]() Specification : CAPACITOR 0.68 MF+/-10%, 100V LEADED X 7R CERAMIC CAPACITOR 0.68 MF+/-10%,100V,2.54 MM PITCH. C Nonestab
19) CAPACITOR LF 7441122086[74]() Specification : CAPACITOR 220 MKF-63V SMD ELECTROLYTIC CAPACITOR 220 MKF-63V,+/-20%,12.5(DIA) X 13.5 MM. C Nonestab
20) NPN TRANSISTOR LF 7441122090[74]() Specification : NPN TRANSISTOR BSR14,215 NPN TRANSISTOR BSR14,215,IN TO -236AB PACKGE. C Nonestab
21) CAPACITOR LF 7441122574[74]() Specification : CAPACITOR K10-17B-M1500-1000PF Drg No.OZHO.460.107 TU CAPACITOR K10-17B-M1500-1000 P F+/-10%-V AS PER SPECN.NO.OZHO .460.107 TU C Nonestab
22) TRANSISTOR 2T201B LF 9001120385[90]() Specification : TRANSISTOR 2T201B TRANSISTOR 2T201B AS PER DRG./SPECN. NO. SBO.336 .046 TU C Nonestab
23) TRANSISTOR 2T630B LF 9927099548[99]() Specification : TRANSISTOR 2T630B Drg No.SPCNNO:YUF3365043TU TRANSISTOR 2T630B AS PER SPECN. NO: YUF3.365.043 TY C Nonestab
24) TRANSISTOR 2T630B LF 9927099759[99]() Specification : TRANSISTOR 2T630B Drg No.SPCNNO:YUF3365043TU TRANSISTOR 2T630B ,SPCN NO: YU F3.365.043 TU C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) GUIDE PISTON TO PT BOF 6115656[90]() Specification : GUIDE PISTON TO PT BOF 6115656 C Nonestab
2) 9081005803 GUIDE TO DRG NO GCF 50 40800[90]() Specification : GUIDE TO DRG.NO.GCF/50/40800 (REF.DRG.NO.4076054) C Nonestab
3) 9081005804 GUIDE TO DRG NO GCF 50 40801[90]() Specification : GUIDE TO DRG.NO.GCF/50/40801 (REF.DRG.NO.4076056). C Nonestab
4) 9081005805 GUIDE TO DRGNO GCF 50 40802[90]() Specification : TO DRG.NO.GCF/50/40802 (REF.DRG.NO.4076063) C Nonestab
5) 9081005806 GUIDE TO DRG NO GCF 50 40803[90]() Specification : GUIDE TO DRG.NO.GCF/50/40803 (REF.DRG.NO.4076066). C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) FUZE PERCUSSION D A NO 5 A EMPTY[63]() Specification : CQA(A) 0922 C Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]() Specification : I.A. 1204 C Nonestab
3) FUZE PERCN DA NO162MK 8 M2 WITH CAP[63]() Specification : CQA(A) 0917 C Nonestab
4) FUZE K3M HE/PRACTICE[60]() Specification : DRG NO.NAI ((P) SKETCH - 324 DT. 22.11.2012 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) BEARING SINGLE ROW 3X10X4MM LF NO 2051100049[20]() Specification : BEARING SINGLE ROW 3X10X4MM LF NO 2051100049 R Nonestab
2) ANGULAR CONTACT BALL BEARING LF NO 9927081756[99]() Specification : ANGULAR CONTACT BALL BEARING LF NO 9927081756 R Nonestab
3) BALL BEARING S R 10X22X6 MM LF NO 9927081746[99]() Specification : BALL BEARING S R 10X22X6 MM LF NO 9927081746 C Nonestab
4) BEARINGS 6 1000093 LF NO 2051250003[20]() Specification : BEARINGS 6 1000093 LF NO 2051250003 C Nonestab
5) SINGLE ROW BEARING 4X13X5MM LF NO 2051100002[20]() Specification : SINGLE ROW BEARING 4X13X5MM LF NO 2051100002 C Nonestab
6) BEARING 6 1000913 LF NO 2051250009[20]() Specification : BEARING 6 1000913 LF NO 2051250009 C Nonestab
7) BEARING 1203 LF NO 2051250012[20]() Specification : BEARING 1203 LF NO 2051250012 C Nonestab
8) BALL BEARING S R 17X35X8MM LF NO 2051190104[20]() Specification : BALL BEARING S R 17X35X8MM LF NO 2051190104 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) PAD TO 6201070149[62]() Specification : PAD TO DRG. NO.188.70.001-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) OPTOMECHANICAL ASSEMBLY SPEC 41[74]() Specification : OPTOMECHANICAL ASSEMBLY SPEC41 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918[99]() Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294. C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]() Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade II
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709 DC 36123 A DT 06 06 96[63]() Specification : BRASS PRESSING BLANKS TO DRG. NO. 1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG. NO. QX-1709. DC 36123-A DT 06-06-96 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) MACHINING OF LUG 243[61]() Specification : AS PER DRAWING C Nonestab
2) MACHINING OF LUG 318[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : Grade I
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
2) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
3) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
4) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
5) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
6) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
7) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
8) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED. C Nonestab
9) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
10) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
11) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
12) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
13) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED]. C Nonestab
14) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
15) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
16) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
17) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
18) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
19) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED]. C Nonestab
20) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
21) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
22) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
23) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]() Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING. C Nonestab
24) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]() Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89 C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) TRACK LINK DRG NO 172 55 012 TRACK T 90 ITEM CODE 6120100128[61]() Specification : TRACK LINK TO DRAWING NO. 172.55.012.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRAWING NO 172.55.012/F(HVF)AND TECHNICAL REQUIREMENTS GOST 4543-71, GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
2) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]() Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS C Nonestab
3) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]() Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
4) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]() Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS C Nonestab
5) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]() Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED C Nonestab
6) FILLING PLUG MACHINED LF NO 6250700174[62]() Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89) C Nonestab
Category : ddp
Grade : 3
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BKT FRONT BUMPER BAR F0430212 V1[90]() Specification : Bracket Front Bumper Bar Drg./Part No. F-0430212(V1) C Estab
2) HYDRAULIC JACK[90]() Specification : HYDRAULIC JACK DRG./PART NO.X-7451300-V3A-1-01-CV3NO-38 C Estab
3) CLUTCH OPERATING LEVER[90]() Specification : CLUTCH OPERATING LEVER, PART NO. F2419811-# C Nonestab
4) CLEVIS BRACKET[90]() Specification : CLEVIS BRACKET (102-29) DRG./PART NO. F-4130011 V1 C Nonestab
5) CLUTCH ROCKER SHAFT[90]() Specification : CLUTCH ROCKER SHAFT DRG./PART NO.F-3355315-C C Estab
6) FRONT TOE PIN ASSY[90]() Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1 C Estab
7) TOW HOOK ASSY[90]() Specification : TOW HOOK ASSY (102_08) DRG./PART NO.A0700500# (V1) C Estab
8) SHACKLE PIN[90]() Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3 C Nonestab
9) CLUTCH OPERATING LEVER OUTER[90]() Specification : CLUTCH OPERATING LEVER OUTER, PART NO. F2414911-A C Estab
10) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Estab
11) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Estab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BKT FRONT BUMPER BAR F0430212 V1[90]() Specification : Bracket Front Bumper Bar Drg./Part No. F-0430212(V1) C Estab
2) HYDRAULIC JACK[90]() Specification : HYDRAULIC JACK DRG./PART NO.X-7451300-V3A-1-01-CV3NO-38 C Estab
3) CLUTCH OPERATING LEVER[90]() Specification : CLUTCH OPERATING LEVER, PART NO. F2419811-# C Nonestab
4) CLEVIS BRACKET[90]() Specification : CLEVIS BRACKET (102-29) DRG./PART NO. F-4130011 V1 C Nonestab
5) CLUTCH ROCKER SHAFT[90]() Specification : CLUTCH ROCKER SHAFT DRG./PART NO.F-3355315-C C Estab
6) FRONT TOE PIN ASSY[90]() Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1 C Estab
7) TOW HOOK ASSY[90]() Specification : TOW HOOK ASSY (102_08) DRG./PART NO.A0700500# (V1) C Estab
8) SHACKLE PIN[90]() Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3 C Nonestab
9) CLUTCH OPERATING LEVER OUTER[90]() Specification : CLUTCH OPERATING LEVER OUTER, PART NO. F2414911-A C Estab
10) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Estab
11) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Estab
12) LOCKING WASHER SECURING WASHER[90]() Specification : LOCKING WASHER /SECURING WASHER PT.NO. X4902110-(7) C Nonestab
Category : p
Grade : Grade II
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR) Description : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR)() Specification : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WI C Estab
2) HINGE FORGING Description : HINGE FORGING() Specification : HINGE(FORGING) DRG NO 765-50-2447-A C Estab
Category : p
Grade : 2
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR) Description : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR)() Specification : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WI C Estab
2) HINGE FORGING Description : HINGE FORGING() Specification : HINGE(FORGING) DRG NO 765-50-2447-A C Estab
Category : p
Grade : 2
Size : S
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR) Description : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR)() Specification : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WI C Estab
2) HINGE FORGING Description : HINGE FORGING() Specification : HINGE(FORGING) DRG NO 765-50-2447-A C Estab
Category : p
Grade : 2
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART[62]() Specification : PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART NO.IQX 46GE, DC NO.36662-A, DT.23.03.2000. C Nonestab
Category : p
Grade : Grade III
Size : S
2004 San Stampings Pvt. Ltd.
372/A-1, Koregaon Park, North Main Road, Pune Maharashtra
PIN1 : 411001
Phone No. : 26611679
GSTIN : 27AACCS5985R1ZB 		PNES16511F

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6334401000 LINERDRG. HEMRL/1437 DET.5 HDC-I[63]() Specification : LINER TO DRG.NO. HEMRL/MISC/SK/NO/ 1437 DET.NO.5 C Nonestab
2) 6334402100 LINER FOR HDC-II DRG.HEMRL/1438,D-5[63]() Specification : LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6473200464 LINER EXPLODER CAVITY DRG.155-1070[64]() Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330301200 LINER FOR SHAPED CHARGES 30 MM[63]() Specification : LINER TO DRG.NO. HE/CAST/012 DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]() Specification : LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
2) OXYGEN FREE COPPER LINER FOR HEDP FOR 40MM AMMN. MGL/UBGL TO DRG. NO. AFK/SK-212-05 MANUFACTURED BY FLOW FORMING PROCESS[60]() Specification : AS PER AFK SPECN. C Nonestab
3) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO. AFK/SK-215-05[60]() Specification : DRG.NO.AFK/SK-215-05. dt. 13.09.2011 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ADAPTER NOSE MORTAR BOMB NO 1 MK 1/L STEEL DES. REF NO. DD(L) 11855, PT NO TV 44, SPECN NO. CQA(A) 2351[60]() Specification : CQA(A) 2351 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CUP FOR CASE CTG SA 5.56 MM BALL (FOR 2 DRAW PROCESS) AS PER DRG NO. AFK/CUP-31A[60]() Specification : DRG NO. AFK/CUP-31A R Nonestab
2) CUP FOR BULLET TO DRG NO.AFK/CUP-9/44 MATERIAL-GILDING METAL (SPECN. NO. IS:2768-1982)[60]() Specification : IS:2768-1982 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CHAMBER FOR DET.NO.36M GRENADE 4[64]() Specification : DESIGN REF.NO. CIA/AMMN/474/PART NO.QX 40 WITH AIDE MEMORIE NO. C7/5 C Nonestab
Category : p
Grade : Grade III
Size : S
2005 AV FORGING
OPP HANSA IND PARK Barwala Road Derabassi Punjab
PIN1 : 140507
Phone No. : 8950212448
GSTIN : 03ABJFA9463D1ZK 		ABJFA9463D

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]() Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
2) FORGING FOR CLAMP TRACK T 90 L F NO 6120100102[61]() Specification : FORGING FOR "CLAMP" TO DRAWING NUMBER 172.55.025/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
3) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]() Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION. C Nonestab
4) WASHER TO DRG NO 219 35 186 TRACK T 90 L F NO 6120100106[61]() Specification : WASHER TO DRAWING NUMBER 219.35.186 {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 19903-74,GOST 1577-93,GOST 14959-79,520 TY 1 PROCESS SHEETS-COLD STAMPING, ISOTHERMAL HARDENING. C Nonestab
5) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
6) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
7) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
8) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED]. C Nonestab
9) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
10) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
11) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
12) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]() Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING. C Nonestab
13) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]() Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89 C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]() Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS C Nonestab
2) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]() Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
3) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]() Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS C Nonestab
4) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]() Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES C Nonestab
5) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]() Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES. C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
2) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
3) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
4) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
5) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
6) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED. C Nonestab
7) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
8) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
9) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
10) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
11) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
12) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
13) FILLING PLUG MCD 450 KG L F NO 6230400504[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
14) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED]. C Nonestab
15) PROTECTING RING ASSEMBLY L F NO 6220900611[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING TO DRG. NO. 1460D. R.NO. 9 DTD. 03-11-17 {NOTE:- TO COVER UP ASSEMBLY REJECTION ITEM NO.4 SHOULD BE SUPPLIED 5% EXTRA} [DRG. ENCLOSED]. C Nonestab
16) ROLLING RING 450 KG L F NO 6231100104[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.-ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, MAKE OF ITEM NOS.4,5,6 AND 7 IS LPS/UNBRAKO/GKW. C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]() Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T C Nonestab
2) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]() Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N C Nonestab
Category : ddp
Grade : 3
Size : S
2006 NEXO INDUSTRIES PVT. LTD
VILL. MANGARH KOHARA MACHHIWARA ROAD KOHARA KOHARA LUDHIANA Punjab
PIN1 : 141112
Phone No. : 2848040
GSTIN : 03AABCN0558L1ZK 		JLDN01203G

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) WHEEL BOLT M 22[90]() Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C C Nonestab
2) BOLT M10 70[90]() Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014 C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA U Bolt with Nut[90]() Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Estab
2) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Estab
3) BOLT M12 PART NO L1011212[90]() Specification : BOLT M12 X 1.75 X 60 BOLT M12 X 1.75 X 60 IS:1364-92 PT-1 P-8.8 GALVD & YELLOW PASSIVATED C Estab
4) BUSH BOLT AGB PART NO X3541715V1[90]() Specification : BUSH BOLT - AGB ( 102-04) BUSH BOLT - AGB (102-04) DRG./PART NO. X-3541715(V-1) C Estab
5) BUSH BOLT AGB PART NO X3541815[90]() Specification : BUSH BOLT - AGB (102-04) BUSH BOLT - AGB (102-04) DRG./PART NO.X-3541815(V-1) Y C Estab
6) BOLT M12 PART NO L1011209[90]() Specification : BOLT M12 X 1.75 X 45 BOLT M12 X 1.75 X 45 IS : 1364-1992 PT-I P-8.8 GALVD & YELLOW PASSIVATED C Estab
7) BOLT M12 PART NO L1021214[90]() Specification : BOLT M12X1.5X70 BOLT M12X1.5X70 IS:1364-92, PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L1021214 C Estab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA U Bolt with Nut[90]() Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH C Nonestab
2) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Nonestab
3) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Hex Bolt M 14x1x30[90]() Specification : Hex Bolt M 14x1x30 C Nonestab
2) LPTA Coller Nuts Hex Bolt M35x1 5[90]() Specification : Coller Nut / Hex Nut M35x1.5 C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) WHEEL BOLT M 22[90]() Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C C Nonestab
2) BOLT M10 70[90]() Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014 C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) T BOLT CLAMP[90]() Specification : T BOLT CLAMP (79DIA), PART NO. X-3900310 C Nonestab
2) U BOLT REAR SPRING[90]() Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I] C Nonestab
3) U BOLT FRONT SPRING[90]() Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A C Nonestab
Category :
Grade : Grade III
Size : M
2007 AKAR AUTO INDUSTRIES LIMITED
304, Abhay Steel House Baroda Street Mumbai Maharashtra
PIN1 : 400009
Phone No. : 6647200
GSTIN : 27AAACA4261G1ZZ 		NSKA03275G

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LEAF SPRING ASSY.[90]() Specification : LEAF SPRING ASSY. (ARMY VERSION) DRG NO. OFPM 640-02-1500/A C Nonestab
Category :
Grade : Grade III
Size : M
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA C PLATED SPANNER DEAC 8X10 TO Spanner 8x10[90]() Specification : CHROME PLATED SPANNER DEAC 8X10 TO IS:2028,HARDNESS & TORQUE AS PER IS:6131(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALAN I EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY). MADE FROM CHROME VANADIUM STEEL C Nonestab
2) LPTA NI CR PLATED SPANNER DEAC19X22[90]() Specification : NI CR.PLATED SPANNER DEAC19X22 TO IS:2028,HARDNESS & TORQUE AS PER IS:6131(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY).MADE FROM CHROME VANADIUM STEEL C Nonestab
3) LPTA NI CR PLATED L D SCREW DRIVER[90]() Specification : NI-CR PLATED L/D SCREW DRIVER 0.4X2.5X50 PR CONFIRMS TO IS:844 PART-1(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPE EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY). MADE FROM CHROME VANADIUM STEEL C Nonestab
4) LPTA CHROME PLATED WHEEL SPNR 27X30[90]() Specification : CHROME PLATED WHEEL SPANNER 27X30 TO IS:2030; HARDNESS & TOR QUE AS PER IS:6131 ALONGWITH TOMMY BAR(MAKE:- EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY). MADE FROM CHROME VANADIUM STEEL, dimensi C Nonestab
5) LPTA CR PLATD D E BX SPNR SW17XSW19[90]() Specification : CHROME PLATED DOUBLE ENDED BOX SPANNER SW17XW19 WITHOUT TOMMY BAR (MAKE:-EVEREST/TAPARIA/GEDORE/JHALANI/JHALANI EXPERT/JK/BETA /AMBIKA OVERSEASE/VENUSY TO DRG.No. 2060 5810 9501 ISSUE V1 C Nonestab
6) LPTA CHROME VANADIUM COMB PLIER 180[90]() Specification : CHROME VANADIUM COMBINATION PLIER 180MM(7") WITH JOINT CUTTER CONFIRMING TO IS:3650 (MAKE:- EVEREST/TAPARIA/GEDORE/ JHALANI/JHALANI EXPERT/JK/BETA PRODUCT/AMBIKA OVERSEAS/VENUS ONLY C Nonestab
7) LPTA Forging for 2nd Speed Gear on Main Shaft[90]() Specification : Forging 2nd Speed Gear Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 0416 3 (R3) C Nonestab
8) LPTA Forging for 4th Speed Gear on Counter Shaft[90]() Specification : Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R) C Nonestab
9) LPTA Forging for Drive Shaft Front Axle[90]() Specification : Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1 C Nonestab
10) LPTA Forging for 4th Speed Gear on Main Shaft[90]() Specification : Forg 4th Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5421 3 C Nonestab
11) LPTA Forging For 3rd Speed Gear on Main Shaft[90]() Specification : Forg 3rd Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5414 3 C Nonestab
12) LPTA Forging for 1st Speed Gear on Main Shaft[90]() Specification : Forging 1st Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5412 3 (R2) C Nonestab
13) LPTA Forging for Drive Shaft[90]() Specification : Forging for Drive Shaft Drg No 322 2820 301 50 ( R1) C Nonestab
14) LPTA Forging for Steering Arm BS III[90]() Specification : Forging for Steering Arm BS-III, LPTA 715, Part No / Drg No 2154 3385 600 3 C Nonestab
15) LPTA Forging for Gear Rear[90]() Specification : Forging for Gear Rear Drg No 322 2820 211 50 (R1) C Nonestab
16) LPTA Forging for Over Drive Gear on Counter Shaft[90]() Specification : Forg Over Drive Gear on Counter Shaft LPTA BS-III Vehicle Drg No 2691 2630 5414 3 (R1) C Nonestab
17) LPTA Forging for Rev Gear on Main Shaft[90]() Specification : Reverse Gear M/S (Forging) Main Shaft LPTA 715 BS-III 2691 2620 5413 3 C Nonestab
18) LPTA Forging for Cont Mesh Gear on Counter Shaft[90]() Specification : Forging for Constant Mesh Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5413 3 C Nonestab
19) LPTA Forging for Main Shaft[90]() Specification : Forging for Main Shaft BS-III LPTA 715 Part No 2691 2620 7911 3 C Nonestab
Category :
Grade : Grade III
Size : M
1) Gun and Shell Factory
Name Specification Use Status
1) FORGED BLANK FOR STABILIZER BODY OF SHELL 125MM HEAT TO GSF DRG NO F 2353[62]() Specification : FORGED BLANK FOR STABILIZER BODY OF SHELL 125MM HEAT TO GSF DRG NO F-2353 R Nonestab
Category :
Grade : Grade III
Size : M
2008 VISHNUPRIYA CHEMICALS PVT LTD
Flat No. 203, H. N. 6-3-652/D/28, II Floor, Dhruvtara, Amrutha Estates, Somajiguda, Hyderabad Telangana
PIN1 : 500082
Phone No. : 40055550
GSTIN : 36AABCV1453E1ZM 		AABCV1453E

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Cuprous Oxide[10]() Specification : CUPROUS OXIDE AS PER SPECN.IS:70-1980 ( REAFFIRMED 2002 ) AMDS 2 FIRST REVISION. R Nonestab
Category :
Grade : Grade III
Size : S
2009 TIOT SYSTEMS PRIVATE LIMITED
Near Sadbhawna Square, Inside Ablaze Institute, Supela, Bhilai, Chhattisgarh, 490023 Awanti Bai Chowk Road BHILAI Chhattisgarh
PIN1 : 490023
Phone No. : 8839500601
GSTIN : 22AAGCT8519C1ZJ 		AAGCT8519C

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Public Address Sysyem[90]() Specification : PUBLIC ADDRESS SYSTEM AHUJA MAKE CONSISTING OF 4 ITEMS AHUJA MOBILE AMPLIFIER MODEL NO. PA400S-1 NO. AHUJA MIKE MM 60-1 NO. AHUJA UNIT HORN COMBINATION MODEL NO-SUH-25-1 NO. AND AHUJA SPEAKER BS 6082T C Nonestab
Category :
Grade : Grade III
Size : S
2010 Arkon Industries
SURVEY NO.512, OPP. URJA POWER COMPANY, NR.DECENT HOTEL, VADODARA-HALOL HIGHWAY, ASOJ VILLAGE, TA. WAGHODIA, VADODARA-HALOL HIGHWAY VADODARA Gujarat
PIN1 : 391510
Phone No. : 281255
GSTIN : 24AAUFA3088L1ZX 		AAUFA3088L

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) POTASSIUM NITRATE GRADE 2 ITEM CODE 1001621720[10]() Specification : POTASSIUM NITRATE GRADE - 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 ( 2nd REV) (REAFFIRMED 2003)DC NO 3810-ME DT 5/5/04 AMENDMENT NO.1 SEP.2003 R Nonestab
2) POTASSIUM NITRATE GR I ITEM CODE 1001621710[10]() Specification : POTASSIUM NITRATE Gr. I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 (2ND REV.) (REAFFIRMED 2003) DC NO. 3810-ME DT. 5/5/04 R Nonestab
Category :
Grade : Grade III
Size : S
2011 GRWOTH TECHNOLOGY
11, Danagodam Market, Near Yog Mitra Mandal, Model Road, NAPIER TWON JABALPUR Madhya Pradesh
PIN1 : 482001
Phone No. : 982613677
GSTIN : 23ADUPA2927K1ZG 		ADUPA2927K

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) CALCIUM SILICIDE 63M JSS-6810-107 (1001093023)[10]() Specification : CALCIUM SILICIDE 63 MICROMETER IS SIEVE TO SPECN.JSS-6810-107 :2013 (REV.NO.3) DC NO.5218-ME DT.12/4/2014 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) TOLUENE PURE NITRATION GRADE[10]() Specification : TOLUENE PURE NITRATION GRADE SPECN:-IS 537-1967 (1ST REV) DC NO. 3807-ME DTD.05/05/04 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) POTASSIUM CHLORIDE MIN ASSAY 99.5% (1001617608)[10]() Specification : POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 % R Nonestab
2) SILICA GEL BAGS WEIGHING 4.5 GMS (+/-) 0.5 GMS (1003250138)[10]() Specification : SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ACETONE(1001010103)[10]() Specification : IS 170-2004 (4TH REV.) R Nonestab
2) SILVER NITRATE (1001712400)[10]() Specification : SPECN:-IS-2214:1977 [FIRST REV] (Reaffirmed-2003). R Nonestab
3) TRICHLOROETHYLENE TECH TYPE2 IS-245 (1001773405)[10]() Specification : TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002. R Nonestab
4) ACID BORIC, SQ GRD IS: 10116-1982 (1001010623)[10]() Specification : SPECN:-IS-10116-1982 (AMENDMENT NO.1 REAFFIRMED 1989) OR EQUIVELANT GRADE OF 99.0% PURITY. R Nonestab
5) ACID TARTRATE OF POTASSIUM (1001620109)[10]() Specification : ACID TARTRATE OF POTASSIUM.(POTASSIUM BI TARTRATE) R Nonestab
6) POTASSIUM NITRATE GR. 2 (1001621720)[10]() Specification : POTASSIUM NITRATE Gr. 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 (2ND REV.) (REAFFIRMED 2003) DC NO. 3810-ME DT. 5/5/04 AMENDMENT NO. 1 SEPT. 2003 R Nonestab
7) DYE ANILINE BLUE BASE COLOUR (1010501007)[10]() Specification : SPECN- JSS 6820-03:2009 (REVISION NO.2) R Nonestab
8) LEAD CHROMATE TO SPECN:-MZ-66006 B. dtd 22/11/68.(1001451708)[10]() Specification : LEAD CHROMATE TO SPECN:-MZ-66006 B. dtd 22/11/68. R Nonestab
9) BARIUM CHROMATE (1001050349)[10]() Specification : BARIUM CHROMATE (1) APPARENT DENSITY 0.35 T0 0.65 g/ml. (2) MEAN DIAMETER OF PARTICLE 2.0 MICRO MAS TO SPECN:- IND/ME/794 (b) 2013 ///DC NO. 5177- ME DATED 20/01/2014 R Nonestab
10) ZINC OXIDE LF 1001941843[10]() Specification : ZINC OXIDE 63 MICROMETER IS SIEVE "ZINC OXIDE SHOULD BE MANUFACTURED FORM ZINC SLAB" TO SPECN: JSS-6810-82:2011 REVISION NO-2). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BARIUM PEROXIDE GR 1 item code 1001051000[10]() Specification : BARIUM PEROXIDE GR. 1 TO SPECN:JSS 6810-96:2011(REVISION NO. 2) DC NO. 5081-ME DT. 06.08.2012 R Nonestab
2) SILICON GREASE SURCIL COMPOUND 77 ITEM CODE 1003126420[10]() Specification : SILICON GREASE SURCIL COMPOUND 77 R Nonestab
3) Lead nitrate Normal item code1001450037[10]() Specification : LEAD NITRATE (NORMAL) TO JSS 6810-80-2011 (REV NO. 2) DC NO. 5048 -ME DT. 15/11/2011 ALONGWITH FOLLOWING PARAMETERS: APPERANCE : PURE WHITE , CRYSTALLINE, PURITY: MIN. 98.5%, COPPER: MAX. 0.001%, INSOLUBLE IN WATER: MAX 0.02%, MAKE:SQ GRA R Nonestab
4) DIAMMONIUM HYDRO ORTHO PHOSPHATE AR ITEM CODE 1001131903[10]() Specification : DI AMMONIUM HYDRO ORTHO PHOSPHATE GRADE AND MAKE EXCELLAR GRADE OF QUALIGEN OR GR GRADE OF E-MERCK OR ANALAR GRADE OF BDH OR AR GRADE OF RANABAXY OR GR GRADE OF LABA OR AR GRADE OF S.D. FINE OR AR GRADE OF CDH ONLY ACCEPTABLE. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SYNTHETIC DENATURED ETHYL ALCOHOL AS PER RUSSIAN item code 1001015728[10]() Specification : SYNTHETIC DENATURED ETHYL ALCOHOL AS PER RUSSIAN SPECN NO. TU 2421-117-00151727-98 GRADE-MAKE:HAYMEN/ RANKEM/MERCK/ THERMO FISHER SIZE: 1 LITRE/ 1.5 LITRE/ 2 LITRE. R Nonestab
2) BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION item code 1001015748[10]() Specification : BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Rectified Ethyl Alcohol as per Russian Specification No GOST 18300 87 grade Premium ITEM CODE 1001015738 Description : Rectified Ethyl Alcohol as per Russian Specification No GOST 18300 87 grade Premium ITEM CODE 1001015738() Specification : Rectified Ethyl Alcohol as per Russian Specification No. GOST 18300-87 grade-Premium. Size 1 Litre/1.5 litre/2 litre. R Nonestab
Category : s
Grade : 3
Size : S
2012 Raymond Limited
Institutional Sales Department, Textile Division, Solitaire Building Pokhran Road No.1 Thane (W) Maharashtra
PIN1 : 400606
Phone No. : 61528110 		PNER07782F

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Cloth PW Poly Viscose Dope dyed OG 150cm[21]() IND/TC/0048(g) R Estab
Category : ddp
Grade : Grade II
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Cloth PW Poly Viscose Dope dyed OG 150cm[21]() IND/TC/0048(g) R Estab
2) Fabric (Suit Winter) 150 cm Width (Min)[21]() Specification : IAFS 01079:2015 R Estab
Category : ddp
Grade : Grade II
Size : L
2013 Ambetronics Engineers Private Limited
17-B, Tarun Industrial Estate New Nagardas Road, Mogra Pada, Andheri - East New Nagards Road, Mogra Pada Mumbai Maharashtra
PIN1 : 400069
Phone No. : 2261673023
GSTIN : 27AAHCA0780B1Z2 		MUMA33539C

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) FLAME SENSOR TO SPECIFICATION NO OFPM R AND D SP MPV FLAME SENSOR[90]() Specification : FLAME SENSOR TO SPECIFICATION NO. OFPM/R&D/SP/MPV/FLAME SENSOR C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) FLAME SENSOR[90]() Specification : FLAME SENSOR TO SPECIFICATION NO. OFPM/R&D/SP/MPV/FLAME SENSOR C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) FLAME SENSOR[90]() Specification : FLAME SENSOR TO SPECIFICATION NO. OFPM/R&D/SP/MPV/FLAME SENSOR C Nonestab
Category :
Grade : Grade III
Size : S
2014 VINAYAK ENGINEERING WORKS
123/431, FACTORY AREA, FAZAL GANJ, FAZAL GANJ, Kanpur Nagar, Uttar Pradesh, 208012 FAZAL GANJ KANPUR Uttar Pradesh
PIN1 : 208012
Phone No. : 9450280965
GSTIN : 09AAJFV7024N1ZJ 		AAJFV7024N

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) PRIMER MAGAZINE ASSEMBLY NO 4091303D[90]() Specification : PRIMER MAGAZINE ASSEMBLY NO 4091303D C Nonestab
Category :
Grade : Grade III
Size : S
2015 Ri Vai Traders and Distributors
C-80 A, Uncheper Mandawali Near Tarawati hospital gali no 2 delhi Delhi
PIN1 : 110092
Phone No. : 22471825
GSTIN : 07BFXPS4339K1ZI 		BFXPS4339K

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) HAEMATITE IRON ORE GRADE 61 63 LUMPS SIZE 50 MM TO 100 MM L F NO 0438073000[04]() Specification : AS PER OFM SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : SS
2016 Manmohan Commercials Limited
35B Dada Nagar Kanpur Dada Nagar Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2296151
GSTIN : 09AAACM9685L1Z0 		AAACM9685L

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) NETS CAMOUFLAGE HEAD DRESS OG MK-2[21]() Specification : IND/TC/2070 (c) E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRICATION OF BELT ICK BLACK A/F[21]() Specification : AS PER REQUIREMENT & SPECIFICATION  R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) Bag Nose Large Complete[21]() Specification : AS PER REQUIREMENT & SPECIFICTAION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) NET MOSQUITO POLYESTER ROUND MESH O.G[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRICATION OF HAVERSACK (MODIFIED)[21]() Specification : Prov.IND/TC/1550 (7202/PK dt.21/09/2013) AND ATTACHED RELEVE R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) TRADE FABRICATION OF NET MOSQUITO R M POLY KHAKI WITH CALICO BORDER[21]() Specification : AS PER SPECN NO.JSS:7210-29-2016(REVISION NO.1) E Estab
2) TRADE FABRICATION OF RAIN CAPE MULTI PURPOSE DISRUPTIVE PONCHO[21]() Specification : PROV/S/3566/RAIN CAPE MP DIS/TC-15(d) (7197/PK) E Estab
3) TRADE FABRICATION OF BAG KIT UNIVERSAL MARK 2[21]() Specification : S/2532/BAG KIT UNIVERSAL(OG)/TC-6(a) E Estab
4) TRADE FABRICATION OF RAIN JACKET WITH INTEGRATED HOOD AND TROUSER SIZE LARGE[21]() Specification : IAFS 01061:2013 with amendment received on dated 06/02/2018. NOTE: BULK SUPPLY SHALL BE STARTED ONLY AFTER APPROVAL OF F.O.T. SAMPLE. E Estab
5) TRADE FABRICATION OF COVER HORSE MK III LARGE[21]() Specification : IND/TC/2556 NOTE: F.O.T. SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY. E Estab
6) TRADE FABRICATION OF COVER HORSE MK III SMALL[21]() Specification : IND/TC/2556 NOTE: F.O.T. SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY. E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) Trade Fabrication of Belt Waist Modified[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) Trade Fabrication of Tent Arctic Small MK II Complete[21]() Specification : Specn No. DRG No. IND/TC/825 (b) R Estab
2) Trade Fabrication of Tent Arctic Medium MK II Complete[21]() Specification : Spcn No. DRG No. IND/TC/0824 (a) R Estab
3) Trade Fabrication of Canopy Top[21]() Specification : Spcn. No. VFJ DRG No. 2614-7000-0137 R Estab
4) Trade Fabrication of Chagul Universal MK II[21]() Specification : Specn No.- OEF/01/19443 with 1 Drg. Plate attached (7104/PK) R Estab
5) Trade Fabrication of Tank Canvas Water S Type 230 LTRS Cover MK I[21]() Specification : SPECN NO : OEF/01/16580 (7102/PK) R Estab
6) Trade Fabrication of Ass Canvas Canopy Stallion 4x4 MK IV[21]() Specification : Specn No. Drawing No. JSF-J-123-3-2008(Rev No.1) R Estab
7) Trade Fabrication of Tank Canvas Water S type 230 Ltrs Body MK I[21]() Specification : Specn No.- OEF/01/16580 (7102/PK) R Estab
8) LT WT WEB EQUIPT PACK OG COMPLETE[21]() Specification : SPECN. NO.- JSS:8465-27:2000 WITH AMENDMENT NO.1 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) TRADE FABRICATION OF S QUILTING AND STRAIGHT QUILTING PANNELS OF INNER AND OUTER WITH ALL THE COMPONENTS OF BAG SLEEPING LIGHT WT[20]() Specification : Specification: PROV.SPECN. NO.S/6421/BAG SLEEPING LT WT/TC-6 with special terms & conditions enclosed. R Estab
Category :
Grade : Grade III
Size : S
2017 ASSOCIATED TOOLINGS INDIA PRIVATE LIMITED
BALITIKURI, KALITALA, HOWRAH-711113 HOWRAH AMTA ROAD HOWRAH West Bengal
PIN1 : 711113
Phone No. : 26530488
GSTIN : 19AAECA7887N1ZR 		AAECA7887N

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) SLIDE TO DRG NO CTM 166[70]() Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C C Nonestab
2) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]() Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A C Nonestab
Category :
Grade : Grade III
Size : S
2018 Gujarat Narmada Valley Fertilizers & Chemicals Limited
P O NARMADANAGAR DIST : BHARUCH - 392 015 GUJARAT, INDIA NARMADANAGAR BHARUCH Gujarat
PIN1 : 392015
Phone No. : 202302
GSTIN : 24AAACG8372Q1Z2 		BRDG00702C

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) STRONG NITRIC ACID[10]() Specification : Specn No-IS:264-2005 IIIrd Rev Reaffirmed 1995 R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Bhandara
Name Specification Use Status
1) DILUTE NITRIC ACID (DNA) TO SPECN IND/ME/129[10]() Specification : DILUTE NITRIC ACID (STRENTH WITHIN THE RANGE BY MASS (50-65) %) STRICTLY CONFORMING TO SPECIFICATION IND/ME/129, DC-3754- ME DTD.12.12.2002 R Nonestab
Category :
Grade : Grade III
Size : L
2019 SVA MOULDERS PVT. LTD.
2396 M.I.E. Bahadurgarh -124507 (Haryana) MIE Bahadurgarh Bahadurgarh Haryana
PIN1 : 124507
Phone No. : 42133839
GSTIN : 06AAECS9107M2Z0 		DELS26343C

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) CASE CARRYING SNV MCT 2015 3 COMPLETE[74]() Specification : CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1 C Nonestab
2) Case Carrying FRP IRDE 2610[74]() Specification : Case Carrying FRP IRDE 2610 C Nonestab
3) CHEEK REST OPTICAL INSTRUMENT DRG NO MCT 1403 5[74]() Specification : CHEEK REST OPTICAL INSTRUMENT DRG.NO. MCT-1403/5 C Nonestab
4) CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1[74]() Specification : CASE CARRYING TELESCOPE SIGHTING 5 56 MM LMG INSAS 101A MCT 1452 1 CONSIST OF MCT 1369 MCT1455 1 MCT1458 1 MCT1454 4 MCT 1350 1 MCT 1453 3 MCT 1456 1 MCT1451 6 MCT 1349 1 C Nonestab
5) FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS[74]() Specification : FRP CASE CARRYING TO DRG NO MCT 1384 1 COMPLETE CONSISTING OF 11 NOS DRGS C Nonestab
6) CASE CARRYING AS PER DRG NO CWC 258 42 FOR AMR SIGHT M 1[74]() Specification : CASE CARRYING AS PER DRG.NO.CWC-258/42 FOR AMR SIGHT, M-1 C Nonestab
Category :
Grade : Grade III
Size : S
2020 Perfect Engineering Works
Gat No 90, Jyotibanagar, Talwade Talawade Road Pune Maharashtra
PIN1 : 411062
Phone No. : 27690851 		PNEP03316F

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[61]() Specification : CQA(A) 1504 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[61]() Specification : CQA(A) 1504 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) HOUSING DELAY SHT 2 SPECN CIA-1804[61]() Specification : CQA(A)1804 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) HOUSING DELAY SHT 2 SPECN CIA-1804[61]() Specification : CQA(A)1804 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ADAPTER NOSE MOR BOMB NO.1 MK 1[6041300500]() Specification : CQA(A) 2351 C Nonestab
2) SLUG FOR 14.5MM CASE AFK/PJ/SK-56[6078020219]() Specification : AFK, DRG NO.AFK/PJ/SK-56 C Nonestab
3) STRIKER DET 3 PART ITW 65 DC (I)[6140600400]() Specification : CQA(A) 1504 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) ADAPTER NOSE MOR BOMB NO.1 MK 1[6041300500]() Specification : CQA(A) 2351 C Nonestab
2) SLUG FOR 14.5MM CASE AFK/PJ/SK-56[6078020219]() Specification : AFK, DRG NO.AFK/PJ/SK-56 C Nonestab
3) STRIKER DET 3 PART ITW 65 DC (I)[6140600400]() Specification : CQA(A) 1504 C Nonestab
Category : p
Grade : Grade III
Size : S