1) CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF PINAKA MK 1 AS PER ARDE DRAWING NO 1905 01 01 00 02 000 12DA
Description : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF PINAKA MK 1 AS PER ARDE DRAWING NO 1905 01 01 00 02 000 12DA()
Specification : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF PINAKA MK-1(E) AS PER ARDE DRAWING NO. 1905 01 01 00 02 000 12DA
C
Estab
Category : p
Grade : 1
Size :
O
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF GUIDED PINAKA AS PER ARDE DRAWING NO 1102 01 01 00 01 000 12DA
Description : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF GUIDED PINAKA AS PER ARDE DRAWING NO 1102 01 01 00 01 000 12DA()
Specification : CONVERSION OF ZINC PLATED MOTOR TUBE INTO LINED MOTOR TUBE OF GUIDED PINAKA AS PER ARDE DRAWING NO.1102 01 01 00 01 000 12DA
R
Estab
Category : p
Grade : 3
Size :
O
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CONVERSION OF MOTOR TUBE OF ARDE DRG NO 8603 02 01 04 00 001 00DF INTO MOTOR TUBE LINER ASSY TO ARDE DRG NO 8603 02 01 01 04 000 00DD DT 30 03 2012
Description : CONVERSION OF MOTOR TUBE OF ARDE DRG NO 8603 02 01 04 00 001 00DF INTO MOTOR TUBE LINER ASSY TO ARDE DRG NO 8603 02 01 01 04 000 00DD DT 30 03 2012()
Specification : CONVERSION OF MOTOR TUBE OF ARDE DRG.NO.8603 02 01 04 00 001 00DF INTO MOTOR TUBE(LINER ASSY)TO ARDE DRG.NO.8603 02 01 01 04 000 00DD DT.30/03/2012 [MFG.,QA/QC,IDENTIFICATION & PAINTNG AS PER SPECIFICATION NO.ARDE/SPECN./PINAKA/RKT-02,REV
C
Estab
Category : dp
Grade : 3
Size :
M
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) FLOW FORM TUBES AND COMPONENTS[20]()
Specification : AS PER DRG.
R
Estab
Category : DDP
Grade : I
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) MOTOR TUBE TO ARDE DRG 8603 02 01 04 00 001 00DF
Description : MOTOR TUBE TO ARDE DRG 8603 02 01 04 00 001 00DF()
Specification : MOTOR TUBE TO ARDE DRG.8603 02 01 04 00 001 00DF DT.30/03/12 OR LATEST AMND DRG.ASON T.E. DATE [MFG,Q.A. & IDENTFCTN MARK AS PER SPECN NO.ARDE/SPECN./PINAKA/RKT-01.REV.NO.6.OR LATEST AMND.SPECN.AS ON T.E.DATE.THE COST OF THE MOTOR TUBES E
C
Estab
2) CENTRAL SLEEVE ASSY TO ARDE DRG NO 8603 02 01 01 05 000 00DC R NO 3 DTD 30 03 2012
Description : CENTRAL SLEEVE ASSY TO ARDE DRG NO 8603 02 01 01 05 000 00DC R NO 3 DTD 30 03 2012()
Specification : CENTRAL SLEEVE ASSY. TO ARDE DRG.NO. 8603 02 01 01 05 000 00DC, R.NO.3 DTD 30/03/2012 [MANUFACTURING, QUALITY ASSURANC & IDENTIFICATION MARK AS PER SPECIFICATION NO.ARDE/SPECN/PINAKA/RKT-03, Latest Issue.] OR LATEST AMENDED DRG & SPECN AS
C
Estab
3) Flow formed motor tube before machining as per Drg No SK 1314
Description : Flow formed motor tube before machining as per Drg No SK 1314()
Specification : Flow formed Motor Tube (Before Machining) as per Drg.No.SK-1314
C
Estab
4) CONV OF PRE FORMED BLANK TO OFAJ DRG FS 2700B INTO MOTOR TUBE MACHINED TO ARDE DRG 8603 02 01 04 00 001 00DF OR LATEST AMENDED DRG AS ON TE DATE
Description : CONV OF PRE FORMED BLANK TO OFAJ DRG FS 2700B INTO MOTOR TUBE MACHINED TO ARDE DRG 8603 02 01 04 00 001 00DF OR LATEST AMENDED DRG AS ON TE DATE()
Specification : CONV.OF PRE-FORMED BLANK TO OFAJ DRG.FS-2700B INTO MOTOR TUBE MACHINED TO ARDE DRG.8603 02 01 04 00 001 00DF OR LATEST AMENDED DRG.ASON T.E.DATE (MFG.Q.A & IDENTIFICATION MARK AS PER SPEC.NO.ARDE/SPECN/PINAKA/RKT-01,REV-06 OR LATEST AMND
R
Estab
Category : ddp
Grade : 1
Size :
S
1902
THE RUBY MILLS LIMITED
Ruby House J.K. Sawant Marg,Dadar West Mumbai Maharashtra
PIN1 : 400028
Phone No. : 24387800 GSTIN :
27AAACTO220G1XZ
Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the
custody of controller CQAT&C Kanpur and in addition the
Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading
Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the
custody of controller CQAT&C Kanpur and in addition the
Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading
Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the
custody of controller CQAT&C Kanpur and in addition the
Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading
1) ARTICULATED CONNECTING ROD OPN 90 TO DRG NO.20-04-19-4()
Specification : 20-04-19-4
C
Estab
2) CAP for ACR upto opn. no.110 TO DRG NO.20-04-22-4()
Specification : 20-04-22-4
C
Estab
3) EXHAUST CAM SHAFT TO DRG.NO.20-07-15A()
Specification : 20-07-15A
C
Estab
4) INLET CAM SHAFT FORGING TO DRG.NO.307-06-4A()
Specification : 307-06-4A
C
Estab
5) IDLE GEAR WITH BUSH ASSY TO DRG NO. SB 3338-409()
Specification : SB 3338-409
C
Estab
6) SUB ASSY SPLINED COUPLING TO DRG. NO.92-1106-220()
Specification : 92-1106-220
C
Estab
7) COMPRESSED AIR STARTING TUBING ASSY TO DRG.NO.SB 322-00-9()
Specification : SB 322-00-9
C
Estab
8) ASSY OF TOOTHED CONTROL RACK TO DRG.NO. SK/1382()
Specification : SK/1382
C
Estab
Category : p
Grade : Grade III
Size :
S
1Engine Factory Avadi
Name
Specification
Use
Status
1) OIL SLINGER / OIL CONTRO RING TO DRG. NO. 3304-08-9&08-11()
Specification : 3304-08-9&08-11
C
Estab
2) ASSY OF CONNECTING ROD SHELL R1 TO DRG.NO. SB 3304-25 & 26()
Specification : SB 3304-25 & 26
C
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING AND MACHINING OF TA LINK (6120100128)[61]()
Specification : TA LINK TO DRAWING NO.OFM-32844.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/
TDS/TECH/04 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG NO32844.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING & MACHINING OF TA GUIDE (6120100129)[61]()
Specification : TA GUIDE TO DRG.NO.OFM-32845.COMPONENT SHALL BE MADE FROM
CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS
/TECH/03 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.
32845 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Extractor Lower (Item Code-9911649089)[99]()
Specification : As per drg. (2A26-02-81)
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Extractor Upper (Item Code-9911649088)[99]()
Specification : As per drg. (2A26-02-80)
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DIAPHRAGM (NOZZLE PLATE) FOR RGB 60[12]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) FORGING ADAPTOR[12]()
Specification : STEEL GRADE 709M40
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HEAD ROCKET BODY ( PRE MACHINED) FOR RGB -60 [12]()
Specification : AS PER DRAWINGS
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HEAD ROCKET ASSY FOR RGB-60[12]()
Specification : AS DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) CHAMBER AFT MOTOR[12]()
Specification : STEEL MACHINED
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Engine Factory Avadi
Name
Specification
Use
Status
1) Common Blank for Bearing pace()
20-01-41 , 44-7 & 133-2
E
Estab
2) Spacer Assy()
Sb 20-63-07
E
Estab
3) Cluster Gear upto opn no:50()
20-08-204-3
E
Estab
4) Governor cover()
315-620-5
E
Estab
5) Crankshaft Gear upto opn no: 30()
3305-17-1
E
Estab
Category : dp
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FOUR TYPES OF CASTING[02]
1(a) Sand Castings/172 TY-4,GOST 977-88
1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73
2.Investment Castings/172 TY-10, GOST 977-88
3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75
4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.()
Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Engine Factory Avadi
Name
Specification
Use
Status
1) RH CYLINDRICAL JACKET[62]()
Specification : RH CYLINDRICAL JACKET TO DRG NO.SB 303-03-16
C
Estab
2) LH CYLINDRICAL JACKET[62]()
Specification : LH CYLINDRICAL JACKET TO DRG NO.SB 303-02-23
C
Estab
3) RH HEAD COVER[62]()
Specification : RH HEAD COVER TO DRG NO.SB 406-08-3
C
Estab
4) LH HEAD COVER[62]()
Specification : LH HEAD COVER TO DRG NO.SB 306-09-8
C
Estab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEVER[04]()
Specification : 20X2H44 GOST 4543-71
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) CARRIER[04]()
Specification : 20X2H4A GOST 4543-71
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) GEAR DRIVE[04]()
Specification : 20X2H44
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) STOPPER[4]()
Specification : 38XC GOST 4543-71
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) RIM EPICYCLIC[4]()
Specification : 38XC 4543-71
C
Nonestab
2) COVER LABYRINTH[4]()
Specification : GOST 1050-60
C
Nonestab
3) HOUSING BOOSTER RH,LH[4]()
Specification : 38XC GOST 4543-71
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) PARTITION TO DRG NO 172 52 140 1AF TO LF NO 3901052011[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) Ring to LF 3906203163 to Drg 175 18 043 F[39]()
Specification : GOST 4543-71
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) CARRIER IV PLANETARY GEAR TRAIN TO LF 3956401121[39]()
Specification : GOST 4543-71
C
Nonestab
2) CARRIER PLANET TO DRG NO 172 40 238 F TO LF 3906401072[39]()
Specification : GOST 4543 71
C
Nonestab
3) CARRIER CHEEK TO LF 3901040050[39]()
Specification : GOST 4543-71
R
Nonestab
4) CARRIER OPERATION 10 20 TO DRG NO 172 43 021 SMF TO LF 3951043011[39]()
1) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 FOR HARD ARMOUR PANEL FOR FRONT AND BACK[21]()
Specification : AS PER SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 FOR HARD ARMOUR PANEL FOR FRONT AND BACK[21]()
Specification : AS PER SPECIFICATION
R
Nonestab
2) MONOLITHIC BORON CARBIDE CERAMIC PLATE VARIETY NO 2 HARD ARMOUR PANEL SIDE[21]()
Specification : AS PER SPECIFICATION
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) CCC of Items for 125mm prac ammn LF 9911358371
Description : CCC of Items for 125mm prac ammn LF 9911358371()
Specification : Combustible Cartg. Case of 7 items for 125mm Practice ammn.
R
Nonestab
2) NC disc II for 125mm FSAPDS Practice LF 9911358706
Description : NC disc II for 125mm FSAPDS Practice LF 9911358706()
Specification : NC disc II for primary and secondary 125mm FSAPDS Practice drg. no. IRW 225
R
Nonestab
3) NG Barrier of 125mm FSAPDS practice LF 9911358705
Description : NG Barrier of 125mm FSAPDS practice LF 9911358705()
Specification : NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1
2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg
R
Nonestab
Category : ddp
Grade : 3
Size :
M
1Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704
Description : COMBUSTIBLE COMPONENT FOR 125MM FSAPDS Practice LF NUMBER 9911358704()
Specification : COMBUSTIBLE COMPONENTS FOR PRIMARY AND SECONDARY 125MM FSAPDS PRACTICE (HEMRL/CCC/PS/417 AUG.2017) CONSIST OF.1.COMBUSTIBLE BODY PRIMARY -PRACTICE TO SPEC./DRG.NO. HEMRL/CCC/125-P/1 .2.COMBUSTIBLE INNER CAP PRIMARY-PRACTICE TO SPEC./DRG.N
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP[64]()
Specification : SET OF COMBUSTIBLE CARTG. CASE FSAPDS TO CQA(A) DRG.NO.IRW 5GE CONSISTING OF 1)COMBUSTIBLE BODY FSAPDS TO DRG.NO.IRW 231 2)COMBUSTIBLE CAP FSAPDS IRW 236 3)COMBUSTIBLE CLOSING DISCIRW 237 4)SPACER IRW 238 5)COMBUSTIBLE CAP FSAPDS W/SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432100201 RESIN BASED CCC FOR 120 FSAPDS MKII[64]()
2) 6432100202 RESIN BASED CCC FOR 120MM FSAPDS MK[64]()
Specification : SET OF RESIN BASED CCC (COMP-3) FOR 120 MMM FSAPDS MK-I AMMNSPECN.NO.HEMRL/CCC/PS/371,REV-01,JULY 2013 & CONST.OF (I)RESIN BASED COMB.BODY TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.1,(II)CAP TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.2 (III)CLOSINGDIS
C
Nonestab
3) 6432200201 RESIN BASED CCC FOR 120MM HESH AMMN[64]()
Specification : SET OF RESIN BASED CCC (COMP-3) FOR 120 MM HESH AMMN. SPECN.(HEMRL/CCC/PS/372, REV 01, JULY 2013 & DRG.NO. CONST.OF (I)RESIN BASED COMB. BODY DRG.NO.HEMRL/CCC/2005/SK-2007,DET.1(II)CAP DRG.NO.HEMRL/CCC/2005/SK-2007,DET.2 (III)SPACER FORHE
C
Estab
4) 6432200001 SET OF CCC HESH COMP 4 120MM HESH[64]()
Specification : SET OF COMBUSTIBLE CARTG.CASE HESH TO DRG.NO.IRW 4GE CONSISTING (1 NO.EACH) (1) COMBUSTIBLE BODY HESH TO DRG.NO.IRW 241(2) COMBUSTIBLE CAP HESH TO DRG.NO.IRW 242 (3)SPACER TO DRG.NO.IRW 243 (4) COMBUSTIBLE CAP HESH SPACER DETL.NO.4 WITHPA
Specification : SPALL LINER AS PER SPECIFICATION NO. VFJ/ODC/TATA407 BS-IV SPALL LINER/01 DTD. 30/01/2019, AS PER ANNEXURE A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP
Description : 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP()
Specification : SET OF COMBUSTIBLE CARTG. CASE FSAPDS TO CQA(A) DRG.NO.IRW 5GE CONSISTING OF 1)COMBUSTIBLE BODY FSAPDS TO DRG.NO.IRW 231 2)COMBUSTIBLE CAP FSAPDS IRW 236 3)COMBUSTIBLE CLOSING DISCIRW 237 4)SPACER IRW 238 5)COMBUSTIBLE CAP FSAPDS W/SPACER
C
Estab
Category : p
Grade : 3
Size :
S
1905
JEET & JEET GLASS AND CHEMICALS PVT LTD
F75A, ROAD NO. 1C V K INDUSTRIAL AREA JAIPUR Rajasthan
PIN1 : 302013
Phone No. : 4121101 GSTIN :
08AAACJ4816C1ZX
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
2) Wind Shield Glass with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
3) Driver Side Glass with gun port hole with rubber beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
4) Side Glass with gun port hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
5) Co Driver Side Glass with gun port hole with rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Rear Glass with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
2) Wind Shield Glass with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
3) Driver Side Glass with gun port hole with rubber beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
4) Side Glass with gun port hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
5) Co Driver Side Glass with gun port hole with rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Rear Glass with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
2) Side Glass with gun port hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/02, Dtd. 12/08/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
3) Windshield Glass with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
4) Driver Side Glass with Gun Port Hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
C
Nonestab
5) Co Driver Side Glass with Gun Port Hole with Rubber Beading[90]()
Specification : Specification No. VFJ/AHSP/MPV/STANAG-II/03, Dtd. 27/11/2021, VFJ will transmit/ forward the soft copy (password protected pdf file) of specification to the vendors after receipt of duly sealed & signed NDA documents from the vendor for o
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
C
Nonestab
8) FORGING OF TA LINK (6120100104)[61]()
Specification : FORGING FOR T.A.LINK TO DRG.NO.OFM-32851. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS
TECH/04.
C
Nonestab
9) FORGING OF TA GUIDE (6120100103)[61]()
Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03.
C
Nonestab
10) FORGING OF TA CLAMP (6120100102)[61]()
Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED.
C
Nonestab
11) FORGING OF TA SHOE (6120100101)[61]()
Specification : FORGING FOR T.A.SHOE TO DRG.NO.OFM-32848 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No-OFM/TDS/TECH/01 ENCLOSED.
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
C
Nonestab
8) FORGING OF TA LINK (6120100104)[61]()
Specification : FORGING FOR T.A.LINK TO DRG.NO.OFM-32851. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS
TECH/04.
C
Nonestab
9) FORGING OF TA GUIDE (6120100103)[61]()
Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03.
C
Nonestab
10) FORGING OF TA CLAMP (6120100102)[61]()
Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED.
C
Nonestab
11) SET OF TA SHOE & TA GUIDE MACHINED()
Specification : AS PER SPECIFICATION
C
Nonestab
12) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
C
Nonestab
13) TA CLAMP MACHINED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
14) TA CLAMP HEAT TREATED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
15) SET OF TA SHOE & TA GUIDE HEAT TREATED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
16) TA LINK MACHINED[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
17) TA LINK HEAT TREATED[99]()
Specification : AS PER SPEFICIFICATION
C
Nonestab
18) TRACK LINK DRG. NO. 172.55.012[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
19) CLAMP TO DRG. NO. 172.55.025[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
20) MANUFACTURING OF T.A PIN ( 37 MM RODS ) & MANUFACTURING OF T.A. PIN (33 MM RODS)[61]()
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
C
Nonestab
8) FORGING OF TA LINK (6120100104)[61]()
Specification : FORGING FOR T.A.LINK TO DRG.NO.OFM-32851. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS
TECH/04.
C
Nonestab
9) FORGING OF TA GUIDE (6120100103)[61]()
Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03.
C
Nonestab
10) FORGING OF TA CLAMP (6120100102)[61]()
Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED.
C
Nonestab
11) SET OF TA SHOE & TA GUIDE MACHINED()
Specification : AS PER SPECIFICATION
C
Nonestab
12) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
C
Nonestab
13) TA CLAMP MACHINED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
14) TA CLAMP HEAT TREATED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
15) SET OF TA SHOE & TA GUIDE HEAT TREATED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
16) TA LINK MACHINED[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
17) TA LINK HEAT TREATED[99]()
Specification : AS PER SPEFICIFICATION
C
Nonestab
18) TRACK LINK DRG. NO. 172.55.012[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
19) CLAMP TO DRG. NO. 172.55.025[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
20) MANUFACTURING OF T.A PIN ( 37 MM RODS ) & MANUFACTURING OF T.A. PIN (33 MM RODS)[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
21) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
22) MACHINING OF LUG 318[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
23) MACHINING OF TRACK GUIDE[61]()
Specification : AS PER OFM APECIFICATION
C
Nonestab
24) FORGING OF TA SHOE (6120100101)[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
Category : p
Grade : Grade I
Size :
L
1High Explosive Factory
Name
Specification
Use
Status
1) RETAINING PIN & RING[10]()
Specification : DES REF.NO. CIA/AMN/1799 DET NO.6 PART NO ITW 10 SA DC 35817-A SPECN NO.CQA(A) 1504(E) DC 35870
C
Nonestab
Category : p
Grade : Grade I
Size :
L
1High Explosive Factory
Name
Specification
Use
Status
1) STRIKER LEVER[10]()
Specification : CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67
C
Nonestab
Category : p
Grade : Grade I
Size :
L
1High Explosive Factory
Name
Specification
Use
Status
1) STRIKER DET[10]()
Specification : CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67
C
Nonestab
Category : p
Grade : Grade I
Size :
L
1909
UNISON TECHPLAST LLP
Shop No 1, Bldg No 11, ASHOK NAGAR, DADLANI PARK,
BALKUM, Thane, Maharashtra, 400608 Shop No 1, Bldg No 11, ASHOK NAGAR, DADLANI PARK Thane Maharashtra
PIN1 : 400608
Phone No. : 8329872429 GSTIN :
27AADFU7553P1ZE
Specification : CERAMIC CAPACITOR 110 PF, 200V COG CERAMIC CAPACITOR 110 PF + /-5%, 200V OF KEMET MAKE (C322C111J2G5TA)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) 7441121520 FILTER[74]()
Specification : 7441121520 FILTER,RFI,FL93 FILTER,RFI,FL93 (HARNESS CONNE CTOR) AS PER BEL PART NO. 453070040 132/ OEM PART NO. M15733/49-00 06 (U.S. MICROTEK COMPONENTS U SA)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1913
AYKA TECH AND ENGINEERING PVT. LTD.
FIRST FLOOR, A-40, MALKA GANJ, NEAR HANS RAJ
COLLEGE, North Delhi, Delhi, 110007 NEAR HANS RAJ COLLEGE, NORTH DELHI Delhi
PIN1 : 110007
Phone No. : 9810126839 GSTIN :
07AASCA6905B1ZQ
1) Semi Finished Graphite Tube for Throat Insert as per Drg No SK 8738 Rev F with Appendix A4 and Appendix A5 for specification inspection parameters and acceptance criteria[65]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.gem.gov.in
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
2) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
5) RECEIVER BUSHING[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
6) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
C
Nonestab
7) Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR[70]()
Specification : Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
C
Nonestab
8) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]()
Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
2) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
3) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
4) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
5) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
6) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
7) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
2) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
3) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()
Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL
C
Nonestab
4) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
5) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
C
Nonestab
6) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE[74]()
Specification : FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ADAPTOR MAGAZINE[74]()
Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
2) BOLT HOUSING[74]()
Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
3) SHAFT ENCODER CASING[74]()
Specification : SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
4) BUMPER ARM[74]()
Specification : BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
5) BUMPER ARM LOCK[74]()
Specification : BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
6) BLOCKING ELEMENT[74]()
Specification : BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
7) BRACKET ASSY 1[74]()
Specification : BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG
C
Nonestab
8) SECTOR BACK COVER FNSH[74]()
Specification : SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
9) SECTOR FRONT COVER FNSH[74]()
Specification : SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
10) ADAPTOR SPRING[74]()
Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG
C
Nonestab
11) LIMITER EXTERNAL[74]()
Specification : LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
12) WASHER FLAT CRES M5 A4[74]()
Specification : WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
13) SUPPORT ELEVATION DRIVE[74]()
Specification : SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
14) BOLT GEAR ELEVATION[74]()
Specification : BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
15) BRACKET ASSY2[74]()
Specification : BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG
C
Nonestab
16) SPACER OIL RETAINER[74]()
Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
17) SUPPORT GEAR TRAVERSE[74]()
Specification : SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
18) ANGLE LIMITER RIGHT[74]()
Specification : ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
19) ANGLE LIMITER LEFT[74]()
Specification : ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
20) BASE STOP A[74]()
Specification : BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
2) BUSHING THREAD REAR[74]()
Specification : BUSHING THREAD REAR 1 (View) AS PER DRG NO.077853A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
3) COVER SOLENOID 2[74]()
Specification : COVER SOLENOID 2 AS PER DRG NO.065283A-00 FOR SOLENOI SHOT ASSY OF SRCG
C
Nonestab
4) ROD LIMITER[74]()
Specification : ROD LIMITER (View) AS PER DRG NO.066426A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
5) PLUG SPRING[74]()
Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
6) BODY EXTERNAL WELDED[74]()
Specification : BODY EXTERNAL WELDED (VIEW)064706A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
7) LEVER TRIGGER[74]()
Specification : LEVER TRIGGER (View) AS PER DRG NO.Y03740A-00 FOR STAND WEAPON ASSY OF SRCG
R
Nonestab
8) HEAD COCKING 1[74]()
Specification : HEAD COCKING 1(VIEW) AS PER DRG NO.066237A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PISTON INNER[74]()
Specification : PISTON INNER (View) AS PER DRG NO.074263A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) COVER MOTOR[74]()
Specification : COVER, MOTOR AS PER DRG NO.Y18725A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
3) SPACER ROTOR[74]()
Specification : SPACER ROTOR (View) AS PER DRG NO.074312A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
4) KEY[74]()
Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
5) STOPPER[74]()
Specification : STOPPER (View) AS PER DRG NO.074266A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
6) NUT[74]()
Specification : NUT (View) AS PER DRG NO.074267A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
7) WASHER ELASTOMER[74]()
Specification : WASHER ELASTOMER (View) AS PER DRG NO.Y01876A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
8) HOUSING CONNECTOR[74]()
Specification : HOUSING CONNECTOR(VIEW) AS PER DRG NO.074253A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
9) COVER SOLENOID 1[74]()
Specification : COVER SOLENOID 1 (VIEW) AS PER DRG NO.065281A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
10) NUT SOLENOID[74]()
Specification : NUT SOLENOID AS PER DRG NO.065454A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
11) SCREW M10[74]()
Specification : SCREW M10 (View) AS PER DRG NO.075871A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
12) BRACKET[74]()
Specification : BRACKET AS PER DRG NO.Y17473A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
13) SCREW SHANK[74]()
Specification : SCREW SHANK, AS PER DRG NO.Y00964A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
14) SCREW HEAD COCKING[74]()
Specification : SCREW HEAD COCKING AS PER DRG NO.066628A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
15) GUIDE RECOIL REAR[74]()
Specification : GUIDE RECOIL, REAR AS PER DRG NO.063796A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
16) BUSHING GUIDE FRONT[74]()
Specification : BUSHING GUIDE, FRONT AS PER DRG NO.063911A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
17) KEY AS PER DRG NO 074811A 00[74]()
Specification : KEY (View) AS PER DRG NO.074811A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1917
OM SAI AUTO INDUSTRIES
VILLAGE KUMBH, AMLOH ROAD ,MANDI GOBINDGARH AMLOH ROAD MANDI GOBINDGARH Punjab
PIN1 : 147301
Phone No. : 9999620500 GSTIN :
03AAEFO4963G1ZC
Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
2) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
3) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
4) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
5) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Cap Glacier[21]()
Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.
E
Estab
2) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
3) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
4) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
5) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
6) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
E
Estab
Category :
Grade : Grade III
Size :
S
1921
International Plastics Ingenieure
279, East Mohan Nagar 100 Ft. Road Amritsar Punjab
PIN1 : 143001
Phone No. : 5004940 GSTIN :
03AAAFI2733C1Z6
