1) Polythene Film of different thickness & dimension[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) POLYTHENE BAG OF DIFFERENT THICKNESS & DIMENSIONS [21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Self Adhesive Polythene Bag Size 50x35 cms point zero 5 mm Thick[21]()
Specification : Self Adhesive Polythene Bag Size 50x35 cms 0.05 mm Thick
CQA(GS)/US/434(a) except sealing will be 'self Adhesive'
R
Estab
2) HDPE Bag White Size 75CM X 50CM X 100CM[21]()
Specification : IS:11652-2000 HDPE Bag White Size 75 CM X 50 CM X 100 CM
R
Estab
3) Self Adhesive Polythene bag of size 45x35cm and point 04 MM Thick[21]()
Specification : SELF ADHESIVE POLYTHENE BAG OF SIZE - 45 X 35 CM & 0.04 MM THICK
SPECIFICATION - CQA(GS)/US/434(a) Except sealing shall be of Adhesive type
R
Estab
4) Self adhesive Polythene bag Size 65x50cm X point zero 5 mm thick[21]()
Specification : Self adhesive Polythene bag Size 65x50cm X 0.05 mm thick
No. CQA(GS)/US/434(a) except sealing will 'self adhesive'
R
Estab
5) Self Adhesive Polythene Bag Size 95x70 cm x point zero 5 mm[21]()
Specification : Self Adhesive Polythene Bag Size 95 x 70 cm x 0.05 mm
Specification no. CQA(GS)/US/434(a) Except sealing will be 'self adhesive"
R
Estab
6) Self Adhesive Polythene Bag Size 80x50 cm x point zero 5 mm[21]()
Specification : Self Adhesive Polythene Bag Size 80 cm x 50 cm. Thickness of Poly Film-0.05 mm
Specification no. CQA(GS)/US/434(a). Except that the sealing will be "Self Adhesive"
R
Estab
7) SELF ADHESIVE POLYTHENE BAG OF SIZE 41X31 point five CM and point zero 5 MM[21]()
Specification : SSELF ADHESIVE POLYTHENE BAG OF SIZE 41X31.5 CM & 0.05 MM
CQA(GS)/US/434(a) EXCEPT SEALING WILL BE 'SELF ADHESIVE'
R
Estab
8) SELF ADHESIVE POLYTHENE BAG SIZE 40CM WIDTH X 76 CM LENGTH X 0 POINT 05 MM THICK[21]()
Specification : SELF ADHESIVE POLYTHENE BAG SIZE 40CM WIDTH X 76 CM LENGTH X 0.05 MM THICK
CQA (GS)/US/434(A). EXCEPT SEALING WILL BE 'SELF ADHESIVE'.
R
Estab
9) SELF ADHESIVE POLYTHENE BAG SIZE 50 CM X 35 CM THICKNESS OF POLYTHENE FILM 0 point 04 MM[21]()
Specification : SELF ADHESIVE POLYTHENE BAG.SIZE:50CM X 35 CM.THICKNESS OF POLYTHENE FILM-0.04 MM SPECIFICATION;-CQA(GS)/US/434 (a),EXCEPT THAT THE SEALING WILL BE "SELF ADHESIVE"AS PER RELEVANT CLAUSE OF THE SPECIFICATIONAS PER RELEVANT CLAUSE OF THE SP
R
Estab
10) SELF ADHESIVE POLYTHENE BAG SIZE 65 X 50 CM X 0 POINT 04 MM THICK[21]()
Specification : SELF-ADHESIVE POLYTHENE BAG SIZE 65X50CMX0.04MM THICK SPECIFICATION NO. CQA(GS)/US/434(A) EXCEPT SEALING SHALL BEOF ADHESIVE TYPE.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION
R
Estab
11) Self Adhesive Polythene bag of size 45x35cm and point 05 MM Thick[21]()
Specification : SELF ADHESIVE POLYTHENE BAG OF SIZE - 45 X 35 CM & 0.04 MM THICK
SPECIFICATION - CQA(GS)/US/434(a) Except sealing will be 'Self Adhesive'
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm[70]()
Specification : Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm
1) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
C
Nonestab
3) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
5) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
6) MANUFACTURING OF REAR CROSS[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS OF MGL BLANKS TO DRAWING TEND NO. 2654 WITH FIRM'S MATERIAL
C
Nonestab
7) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
8) MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL DRAWING NO TEND 2662
C
Nonestab
9) CATCH MAGAZINE[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR[70]()
Specification : AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLANK FIRING ATTACHMENT 7.62 MM 1A. DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.[70]()
Specification : AS PER DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN FIXING BARREL AS PER DRG NO K 1011 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1011 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RIVET BULLET GUIDE AS PER DRG NO K 1102 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1102 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT WASHER AS PER DRG NO K 2072 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 2072
C
Nonestab
2) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR STOP AS PER DRG No K 1103 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 1103 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE AS PER DRG NO K 1113 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1113 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()
Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION FORGING TO DRG.No.: 62C 3021 200 C3. REQUIRED FOR PLATE PUSHING CARTRIDGE CASE - A3021.[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.No.: 62C 3021 200 C3. REQUIRED FOR PLATE PUSHING CARTRIDGE CASE - A3021.
"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
2) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Ring Retaining CQAI 39332[70]()
Specification : RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Screw Externally Releived Body[70]()
Specification : SCREW EXTERNALLY RELEIVED BODY DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
2) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
3) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
C
Nonestab
Category :
Grade : Grade III
Size :
S
1951
Om Tech CNC
PCNTDA, Plot No. 23, Shop No. 11, Swastik Industrial Complex,Sector No. 10, Near Times of India, Bhosari, Pune 411026 Swastik Industrial Complex,Sector No. 10, Near Times of India Pune Maharashtra
PIN1 : 411026
Phone No. : 8830769679 GSTIN : 27AABFO5065C1ZI
1) MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL DRAWING NO TEND 2662
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR[70]()
Specification : AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL
C
Nonestab
2) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
4) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
5) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
6) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
7) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
8) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
9) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
10) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
11) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Nonestab
12) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
13) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
14) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]()
Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Estab
3) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
4) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
5) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
6) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
7) HAMMER TO DRG NO 44P06013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
8) RETAINING BLOCK TO DRG NO 44P 06104[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
9) 20MM FIRING PIN TO DRG NO 44P03013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
10) 14 5MM FIRING PIN TO DRG NO 44P14009[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Machining of CAP of 9MM Carbine in finished condition[70]()
Specification : MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)
C
Nonestab
2) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PISTON FOR JVPC ALFA[70]()
Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA
C
Nonestab
2) CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA[70]()
1) Complete machining of remover 9 A 62109 001 from input material IC 7299000234 to be supplied by GSF IC 9140701109[91]()
Specification : Complete machining of remover (9-A-621.09.001) from input material I/C- 7299000234 to be supplied by GSF (I/C-9140701109)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]()
Specification : AS PER DRAWING
C
Nonestab
2) SLIDE TO DRG NO CTM 166[70]()
Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()
Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) RETAINER TO DRG NO 9002 00 01 00 00 003 00TA IN FINISH CONDITION[62]()
Specification : RETAINER TO DRG. NO. 9002-00-01-00-00-003-00TA IN F/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
2) MSL LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
3) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()
Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
2) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
C
Nonestab
3) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT BLANKS OF BLOCK GAS TO TEND 1966STAR WITH FIRMS MATERIAL FOR RIFLE 7POINT62 1A1 ICR 1322[70]()
Specification : AS PER TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()
Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR2 FROM OFT MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL
R
Nonestab
2) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()
Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) MACHINING OF FORGED CANISTER[63]()
Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address :
Govt. Of India,
Ministry of Defence (DGQA)
Controllerate of Quality Assurance (Amn),
Khadki, Pune- 411 003
Telephone: 25824013-
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
2) RINGH WELDING AND MACHINING BOF 4026964[90]()
Specification : RINGH WELDING AND MACHINING BOF 4026964
C
Nonestab
3) RINGH WELDING AND MACHINING TO PART NO BOF 4020632[90]()
Specification : RINGH WELDING AND MACHINING TO PART NO BOF 4020632
C
Nonestab
4) PEDAL WELDING AND MACHINING 5045062[90]()
Specification : PEDAL WELDING AND MACHINING 5045062
C
Nonestab
5) COVER WELDING AND MACHINING TO DRG NO 3019272[90]()
Specification : COVER WELDING AND MACHINING TO DRG NO 3019272
C
Nonestab
6) LEVER WELDING AND MACHINING DRG NO 6098805[90]()
Specification : LEVER WELDING AND MACHINING DRG NO 6098805
C
Nonestab
Category :
Grade : Grade III
Size :
S
1952
SRP GEARS PRIVATE LIMITED
F14. 2ND MAIN ROAD AMBATTUR INDUSTRIAL ESTATE, CHENNAI Tamil Nadu
PIN1 : 600058
Phone No. : 26251716 GSTIN : 33AAACE1411E1ZK
1) FRONT SIGHT BLOCK BLANK S3 L F No 7024012072[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING OF REAR CROSS[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS OF MGL BLANKS TO DRAWING TEND NO. 2654 WITH FIRM'S MATERIAL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
3) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
4) Manufature and supply of CATCH COCKING HANDLE TO DS CAT NO 1005 001547 ICR 1287 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR RIFLE 7 62MM 1A1[70]()
Specification : AS PER THE SPECIFICATION GIVEN
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
2) MSL LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
3) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
4) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
5) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING BLANK[70]()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56MM AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-03-02-15-000-00DC
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) GAS CYLINDER COVER MOULDING FOR JVPC[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Cylinder Gas for LMG Belt Fed[70]()
Specification : Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.[70]()
Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.
Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V[79]()
Specification : BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*7-S.(DC-01/006/18, DT-14-06-2018)FOR RIFLE 5.56MM INSAS. MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
2) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
3) 14 5mm BOLT BODY TO DRG NO 44P 14010[70]()
Specification : AS PER OFT REQUIREMENTS
C
Nonestab
4) 20MM BOLT BODY TO DRG NO 44P 03004[70]()
Specification : AS PER OFT REQUIREMENTS
C
Nonestab
5) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()
Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING BLANK[70]()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) PISTON EXTENSION BLANK FOR CARBINE 5 56MM[70]()
Specification : PISTON EXTENSION BLANK TO DRG NO. AKC-07/01BL*1 FOR CARBINE 5.56MM.
C
Nonestab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) BIPOD ASSY. TO DSCAT NO. 1005-557897 FOR MG 5.56 MM consisting of 24 components[72]()
Specification : AS PER DRG.
C
Nonestab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94[70]()
Specification : BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
3) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
4) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
Specification : SPECN NO.IS:4741-1968 ( WITH BEST TRADE QUALITY)
R
Nonestab
213) SNAP HOOK AND SPRING CLIP FOR ACCT[2110008507]()
Specification : ADRDE/196(d) & ADRDE/197(d).
R
Nonestab
214) SOCKET FOR HARNESS FOR PSM SERIES[2010068067]()
Specification : DRG.NO.ADRDE/1387 (a)
R
Nonestab
215) SPEADER BAR PRIMARY (ASSY)[2110070001]()
Specification : SPECN-ARM-1350-B4
R
Nonestab
216) SPREADER BAR SECONDARY[0619058514]()
Specification : DWG.NO. ARM 1350 B 11
R
Nonestab
217) SPREADLE BAR BUCKLE[2110075002]()
Specification : DRG. NO.ADRDE/1341(c)
R
Nonestab
218) SPRING EJECTOR[2110075024]()
Specification : SPCN.NO.ADRDE/1197-A3/(SA-2)(a)
R
Nonestab
219) STEEL RING[2110032000]()
Specification : SPECN. NO. IND/GS/1871.
R
Nonestab
220) STEEL SCREW SIZE NO 10[9911034666]()
Specification : STEL SCREW SIZE NO.10 50 MM LONG
R
Nonestab
221) STEEL SCREW SIZE NO 8[9911034665]()
Specification : Steel Screw Size NO.8X20 MM LONG
R
Nonestab
222) STICKER STREP LUG[2110075000]()
Specification : DRG. NO. ADRDE/1338(a)
R
Nonestab
223) STIFFENNER FOR RIP CORD PIN PROTECTION FLAP[2110030007]()
Specification : SPECN:-ADRDE/86(c)
R
Nonestab
224) STRAND SAFETY PIN FOR PSM SERIES[2010068060]()
Specification : DRG.NO:-ADRDE/1384.
R
Nonestab
225) STIFFNER PLATE[2110036054]()
Specification : SPECN-ADRDE/1423
R
Nonestab
226) Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute[2110080016]()
Specification : CQA(GS)/US/563
R
Nonestab
227) SUPPORT PLATE[2103712207]()
Specification : SUPPORT PLATE AS PER DRG. NO. OPF/DO/ME-265
R
Nonestab
228) SWIVEL CONE WITH PLATE[2110071013]()
Specification : DRG.NO.:ADRDE/1321(b) DRD/60/98.
R
Nonestab
229) TACK, IRON 20 MM LONG[9911036265]()
Specification : IS 723
R
Nonestab
230) THIMBLE[2110057005]()
Specification : SPECIFICATION: ADRDE/1394(a)
R
Nonestab
231) THIMBLE FOR 120 MM BOMB PARACHUTE[2110033001]()
Specification : SPECN./DRG.NO. CQA(GS)/US/381
R
Nonestab
232) THIMBLE FOR PARACHUTE SYSTEM FOR MORTAR BOMB 81mm ILLUMINATING MK-II VERSION[2110052003]()
Specification : DRG. NO. ADRDE/1113(a)
R
Nonestab
233) TOWING RING 20MM ID[2110025023]()
Specification : DRG.NO.ADRDE/1402-02-002.
R
Estab
234) TOWING RING LARGE[2110019004]()
Specification : DRG NO ADRDE/1235-A2(b).
R
Nonestab
235) TOWING RING LARGE BPLCA[2010068064]()
Specification : Drg. No. 1.3.01-06-01-(b)
R
Nonestab
236) TOWING RING SMALL[2110019005]()
Specification : SPECN NO-ADRDE/1235-A2(b).
R
Nonestab
237) TRINGULAR D RING[2110072001]()
Specification : SPECN-ARM 1350 B 3
R
Nonestab
238) U SHACKLE for PP PSU[2110019015]()
Specification : DRG. NO-ADRDE/1380.
R
Nonestab
239) WAIST LOOP SHACKLE[2110068042]()
Specification : ADRDE/1313
R
Nonestab
240) WHITE LINE PIN ASSY.[2110075006]()
Specification : DRG.NO.ADRDE/1356.
R
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Parachute Factory
[ENR Registration]
Name
Specification
Use
Status
1) LEG LOOP SHACKLE
Description : LEG LOOP SHACKLE()
Specification : DRG.NO.ADRDE/1381.
R
Estab
Category : p
Grade : 2
Size :
S
1956
Abhaya Precision Industries Pvt Ltd
70/2 Gouri Bari Lane Gouri Bari Lane kolkata West Bengal
PIN1 : 700004
Phone No. : 25540422 GSTIN : 19AACCA1104A1ZM
1) MINIATURE QUARTZ PRESSURE SENSOR 1000 Bar TYPE-601H WITH ADAPTOR M10X1 TYPE 6503 AND CONNECTING NIPPLE M-4 BNC TYPE-6401
Description : MINIATURE QUARTZ PRESSURE SENSOR 1000 Bar TYPE-601H WITH ADAPTOR M10X1 TYPE 6503 AND CONNECTING NIPPLE M-4 BNC TYPE-6401()
Specification : MAKE- KISTLER
S
Nonestab
Category : p
Grade : 1
Size :
O
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) MINIATURE QUARTZ PRESSURE SENSOR 1000 Bar TYPE-601H WITH ADAPTOR M10X1 TYPE 6503 AND CONNECTING NIPPLE M-4 BNC TYPE-6401
Description : MINIATURE QUARTZ PRESSURE SENSOR 1000 Bar TYPE-601H WITH ADAPTOR M10X1 TYPE 6503 AND CONNECTING NIPPLE M-4 BNC TYPE-6401()
Specification : MAKE- KISTLER
S
Nonestab
Category : p
Grade : 1
Size :
O
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) MINIATURE QUARTZ PRESSURE SENSOR 1000 Bar TYPE-601H WITH ADAPTOR M10X1 TYPE 6503 AND CONNECTING NIPPLE M-4 BNC TYPE-6401
Description : MINIATURE QUARTZ PRESSURE SENSOR 1000 Bar TYPE-601H WITH ADAPTOR M10X1 TYPE 6503 AND CONNECTING NIPPLE M-4 BNC TYPE-6401()
Specification : MAKE- KISTLER
S
Nonestab
Category : p
Grade : 1
Size :
O
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) CNC Spares of TORNOS Make
Description : CNC Spares of TORNOS Make()
Specification : Part No.241278 Make TORNOS
S
Nonestab
Category : p
Grade : 2
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) CNC Spares of TORNOS Make
Description : CNC Spares of TORNOS Make()
Specification : Part No.241278 Make TORNOS
S
Nonestab
Category : p
Grade : 2
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) CNC Spares of TORNOS Make
Description : CNC Spares of TORNOS Make()
Specification : Part No.241278 Make TORNOS
S
Nonestab
Category : p
Grade : 2
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231
Description : ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231()
Specification : ROLLED HOMOGENEOUS ARMOUR (RHA) PLATES SIZE:1200X1500X230MM TYPE`2`MATERIAL AS PER SPECIFICATION DEF STAN 95-13 LATESTISSUE ie. ISSUE NO.4.
P
Nonestab
Category : p
Grade : 1
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231
Description : ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231()
Specification : ROLLED HOMOGENEOUS ARMOUR (RHA) PLATES SIZE:1200X1500X230MM TYPE`2`MATERIAL AS PER SPECIFICATION DEF STAN 95-13 LATESTISSUE ie. ISSUE NO.4.
P
Nonestab
Category : p
Grade : 1
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231
Description : ARMOUR PLATE 1200 X 1500 X 230 MM DEF 95 LF 0430020231()
Specification : ROLLED HOMOGENEOUS ARMOUR (RHA) PLATES SIZE:1200X1500X230MM TYPE`2`MATERIAL AS PER SPECIFICATION DEF STAN 95-13 LATESTISSUE ie. ISSUE NO.4.
P
Nonestab
Category : p
Grade : 1
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ADEN LINK MK-I FOR 30MM ADEN AMMN.
Description : ADEN LINK MK-I FOR 30MM ADEN AMMN. (9911358157)()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
C
Estab
Category : p
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ADEN LINK MK-I FOR 30MM ADEN AMMN.
Description : ADEN LINK MK-I FOR 30MM ADEN AMMN. (9911358157)()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
C
Estab
Category : p
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ADEN LINK MK-I FOR 30MM ADEN AMMN.
Description : ADEN LINK MK-I FOR 30MM ADEN AMMN. (9911358157)()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
C
Estab
Category : p
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ADEN LINK MK-I FOR 30MM ADEN AMMN.
Description : ADEN LINK MK-I FOR 30MM ADEN AMMN. (9911358157)()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
C
Estab
Category : p
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ADEN LINK MK-I FOR 30MM ADEN AMMN.
Description : ADEN LINK MK-I FOR 30MM ADEN AMMN. (9911358157)()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
C
Estab
Category : p
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ADEN LINK MK-I FOR 30MM ADEN AMMN.
Description : ADEN LINK MK-I FOR 30MM ADEN AMMN. (9911358157)()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
C
Estab
Category : p
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) FUEL FURNACE OIL L V IS 1593 74 ITEM CODE 1035763005
Description : FUEL FURNACE OIL L V IS 1593 74 ITEM CODE 1035763005()
Specification : FUEL FURNACE OIL GRADE (LOW VISCOSITY) AS PER SPECN:- IS-1593 OF 1982 (SECOND REVISION)
P
Estab
2) PETROL MT GASOLINE IS 2796 1961 ITEM CODE 1036110000
Description : PETROL MT GASOLINE IS 2796 1961 ITEM CODE 1036110000()
Specification : MOTOR GASOLINE TO SPECN: IS-2796-2000 (3RD REVISION) GRADE UNLEADED REGULAR.
P
Nonestab
3) DIESEL HPP GR HSD IS 1460 1974 ITEM CODE 1035761024
Description : DIESEL HPP GR HSD IS 1460 1974 ITEM CODE 1035761024()
Specification : DIESEL FUELS GR HSD TO SPECN IS -1460- 1995 (3RD REV)
P
Nonestab
4) OIL KEROSINE IS 1459 1974 ITEM CODE 1035820008
Description : OIL KEROSINE IS 1459 1974 ITEM CODE 1035820008()
Specification : KEROSINE OIL TO SPECN:- IS-1459-1974 (SECOND REVISION) (REAFFIRMED 1996) AMENDMENT NO. 2 OF 11/84.
P
Nonestab
5) LIQUIFIED PETROLIUM GAS LPG 14 ITEM CODE 1001250510
Description : LIQUIFIED PETROLIUM GAS LPG 14 ITEM CODE 1001250510()
Specification : LIQUIFIED PETROLIUM GAS (LPG) CAPACITY 14.2 KG CYLINDER
P
Nonestab
6) GAS LIQUEFIED PETROLIUM LPG 19 KG
Description : GAS LIQUEFIED PETROLIUM LPG 19 KG()
Specification : LIQUIFIED PETROLIUM GAS (LPG), CAPACITY 19 KG COMMERCIAL CYLINDERS.
P
Nonestab
Category : ddp
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) FUEL FURNACE OIL L V IS 1593 74 ITEM CODE 1035763005
Description : FUEL FURNACE OIL L V IS 1593 74 ITEM CODE 1035763005()
Specification : FUEL FURNACE OIL GRADE (LOW VISCOSITY) AS PER SPECN:- IS-1593 OF 1982 (SECOND REVISION)
P
Estab
2) PETROL MT GASOLINE IS 2796 1961 ITEM CODE 1036110000
Description : PETROL MT GASOLINE IS 2796 1961 ITEM CODE 1036110000()
Specification : MOTOR GASOLINE TO SPECN: IS-2796-2000 (3RD REVISION) GRADE UNLEADED REGULAR.
P
Nonestab
3) DIESEL HPP GR HSD IS 1460 1974 ITEM CODE 1035761024
Description : DIESEL HPP GR HSD IS 1460 1974 ITEM CODE 1035761024()
Specification : DIESEL FUELS GR HSD TO SPECN IS -1460- 1995 (3RD REV)
P
Nonestab
4) OIL KEROSINE IS 1459 1974 ITEM CODE 1035820008
Description : OIL KEROSINE IS 1459 1974 ITEM CODE 1035820008()
Specification : KEROSINE OIL TO SPECN:- IS-1459-1974 (SECOND REVISION) (REAFFIRMED 1996) AMENDMENT NO. 2 OF 11/84.
P
Nonestab
5) LIQUIFIED PETROLIUM GAS LPG 14 ITEM CODE 1001250510
Description : LIQUIFIED PETROLIUM GAS LPG 14 ITEM CODE 1001250510()
Specification : LIQUIFIED PETROLIUM GAS (LPG) CAPACITY 14.2 KG CYLINDER
P
Nonestab
6) GAS LIQUEFIED PETROLIUM LPG 19 KG
Description : GAS LIQUEFIED PETROLIUM LPG 19 KG()
Specification : LIQUIFIED PETROLIUM GAS (LPG), CAPACITY 19 KG COMMERCIAL CYLINDERS.
P
Nonestab
Category : ddp
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) FUEL FURNACE OIL L V IS 1593 74 ITEM CODE 1035763005
Description : FUEL FURNACE OIL L V IS 1593 74 ITEM CODE 1035763005()
Specification : FUEL FURNACE OIL GRADE (LOW VISCOSITY) AS PER SPECN:- IS-1593 OF 1982 (SECOND REVISION)
P
Estab
2) PETROL MT GASOLINE IS 2796 1961 ITEM CODE 1036110000
Description : PETROL MT GASOLINE IS 2796 1961 ITEM CODE 1036110000()
Specification : MOTOR GASOLINE TO SPECN: IS-2796-2000 (3RD REVISION) GRADE UNLEADED REGULAR.
P
Nonestab
3) DIESEL HPP GR HSD IS 1460 1974 ITEM CODE 1035761024
Description : DIESEL HPP GR HSD IS 1460 1974 ITEM CODE 1035761024()
Specification : DIESEL FUELS GR HSD TO SPECN IS -1460- 1995 (3RD REV)
P
Nonestab
4) OIL KEROSINE IS 1459 1974 ITEM CODE 1035820008
Description : OIL KEROSINE IS 1459 1974 ITEM CODE 1035820008()
Specification : KEROSINE OIL TO SPECN:- IS-1459-1974 (SECOND REVISION) (REAFFIRMED 1996) AMENDMENT NO. 2 OF 11/84.
P
Nonestab
5) LIQUIFIED PETROLIUM GAS LPG 14 ITEM CODE 1001250510
Description : LIQUIFIED PETROLIUM GAS LPG 14 ITEM CODE 1001250510()
Specification : LIQUIFIED PETROLIUM GAS (LPG) CAPACITY 14.2 KG CYLINDER
P
Nonestab
6) GAS LIQUEFIED PETROLIUM LPG 19 KG
Description : GAS LIQUEFIED PETROLIUM LPG 19 KG()
Specification : LIQUIFIED PETROLIUM GAS (LPG), CAPACITY 19 KG COMMERCIAL CYLINDERS.
P
Nonestab
Category : ddp
Grade : 1
Size :
L
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) MAGNESIUM POWDER FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION GR VIIITO SPECN IS 2307 2004 2nd REV ITEM CODE 1001491867
Description : MAGNESIUM POWDER FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION GR VIIITO SPECN IS 2307 2004 2nd REV ITEM CODE 1001491867()
Specification : MAGNESIUM POWDER FOR EXPLOSIVE & PYROTECHNIC COMPOSITION GR. VIIITO SPECN:-IS-2307-2004(2nd REV)APPARENT DENSITY MIN.0.65MAX 0.85 g/ml SIEVE SIZEGIVEN BELOW(1)0.5%(MAX)TOBE RETAINED ON212 MICROMETER SIEVE(2)7.0%(MAX)TOBE RETAINED ON 150 M
R
Estab
2) COPPER OXIDE TO SPECN MZ 66004 B DT 221168 ITEM CODE 1001101907
Description : COPPER OXIDE TO SPECN MZ 66004 B DT 221168 ITEM CODE 1001101907()
Specification : COPPER OXIDE TO SPECN;- MZ 66004 B DT 22/11/68
R
Estab
3) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163
Description : ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163()
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Estab
5) TIN POWDER MZ 6605 1001771519
Description : TIN POWDER MZ 6605 1001771519()
Specification : TIN POWDER TO SPECN NO.MZ 66005. DT. 21/04/2007.
R
Estab
6) Magnesium Powder GR III ITEM CODE 1001491847
Description : Magnesium Powder GR III ITEM CODE 1001491847()
Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV)
Specification : FERRO SILICON TO SPECN:JSS-6810-130:2010(REVISION NO.2) SIZE : 63 MICROMETRE IS SIEVE.
R
Estab
Category : ddp
Grade : 2
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) MAGNESIUM POWDER FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION GR VIIITO SPECN IS 2307 2004 2nd REV ITEM CODE 1001491867
Description : MAGNESIUM POWDER FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION GR VIIITO SPECN IS 2307 2004 2nd REV ITEM CODE 1001491867()
Specification : MAGNESIUM POWDER FOR EXPLOSIVE & PYROTECHNIC COMPOSITION GR. VIIITO SPECN:-IS-2307-2004(2nd REV)APPARENT DENSITY MIN.0.65MAX 0.85 g/ml SIEVE SIZEGIVEN BELOW(1)0.5%(MAX)TOBE RETAINED ON212 MICROMETER SIEVE(2)7.0%(MAX)TOBE RETAINED ON 150 M
R
Estab
2) COPPER OXIDE TO SPECN MZ 66004 B DT 221168 ITEM CODE 1001101907
Description : COPPER OXIDE TO SPECN MZ 66004 B DT 221168 ITEM CODE 1001101907()
Specification : COPPER OXIDE TO SPECN;- MZ 66004 B DT 22/11/68
R
Estab
3) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163
Description : ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163()
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Estab
5) TIN POWDER MZ 6605 1001771519
Description : TIN POWDER MZ 6605 1001771519()
Specification : TIN POWDER TO SPECN NO.MZ 66005. DT. 21/04/2007.
R
Estab
6) Magnesium Powder GR III ITEM CODE 1001491847
Description : Magnesium Powder GR III ITEM CODE 1001491847()
Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV)
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Estab
Category : ddp
Grade : 2
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163
Description : ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163()
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Estab
Category : ddp
Grade : 2
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) MAGNESIUM POWDER FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION GR VIIITO SPECN IS 2307 2004 2nd REV ITEM CODE 1001491867
Description : MAGNESIUM POWDER FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION GR VIIITO SPECN IS 2307 2004 2nd REV ITEM CODE 1001491867()
Specification : MAGNESIUM POWDER FOR EXPLOSIVE & PYROTECHNIC COMPOSITION GR. VIIITO SPECN:-IS-2307-2004(2nd REV)APPARENT DENSITY MIN.0.65MAX 0.85 g/ml SIEVE SIZEGIVEN BELOW(1)0.5%(MAX)TOBE RETAINED ON212 MICROMETER SIEVE(2)7.0%(MAX)TOBE RETAINED ON 150 M
R
Estab
2) COPPER OXIDE TO SPECN MZ 66004 B DT 221168 ITEM CODE 1001101907
Description : COPPER OXIDE TO SPECN MZ 66004 B DT 221168 ITEM CODE 1001101907()
Specification : COPPER OXIDE TO SPECN;- MZ 66004 B DT 22/11/68
R
Estab
3) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163
Description : ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163()
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Estab
5) TIN POWDER MZ 6605 1001771519
Description : TIN POWDER MZ 6605 1001771519()
Specification : TIN POWDER TO SPECN NO.MZ 66005. DT. 21/04/2007.
R
Estab
6) Magnesium Powder GR III ITEM CODE 1001491847
Description : Magnesium Powder GR III ITEM CODE 1001491847()
Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV)
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Estab
Category : ddp
Grade : 2
Size :
M
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) CLOTH ALL WOOL MELTON SPECN JSS 8305 16 2009 REV NO 2 ITEM CODE 2101096839
Description : CLOTH ALL WOOL MELTON SPECN JSS 8305 16 2009 REV NO 2 ITEM CODE 2101096839()
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
R
Estab
3) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
R
Estab
4) FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015
Description : FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015()
Specification : FELT WOOL PRESSED WHITE 1 POINT 5 MM
Specification : FELT WOOLEN (PRESSED) WHITE UNPROOFED SOFT VARIETY 13.00MM THICK X 1320.8 MM TO SPECN: IS -1719-1988(3RD REVISION)WITH AMENDMENT NO. 1 JULY 1990
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
R
Estab
3) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
R
Estab
4) FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015
Description : FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015()
Specification : FELT WOOL PRESSED WHITE 1 POINT 5 MM
Specification : FELT WOOLEN (PRESSED) WHITE UNPROOFED SOFT VARIETY 13.00MM THICK X 1320.8 MM TO SPECN: IS -1719-1988(3RD REVISION)WITH AMENDMENT NO. 1 JULY 1990
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
R
Estab
3) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
R
Estab
4) FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015
Description : FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015()
Specification : FELT WOOL PRESSED WHITE 1 POINT 5 MM
Specification : FELT WOOLEN (PRESSED) WHITE UNPROOFED SOFT VARIETY 13.00MM THICK X 1320.8 MM TO SPECN: IS -1719-1988(3RD REVISION)WITH AMENDMENT NO. 1 JULY 1990
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
R
Estab
3) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
R
Estab
4) FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015
Description : FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015()
Specification : FELT WOOL PRESSED WHITE 1 POINT 5 MM
Specification : FELT WOOLEN (PRESSED) WHITE UNPROOFED SOFT VARIETY 13.00MM THICK X 1320.8 MM TO SPECN: IS -1719-1988(3RD REVISION)WITH AMENDMENT NO. 1 JULY 1990
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
R
Estab
3) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
R
Estab
4) FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015
Description : FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015()
Specification : FELT WOOL PRESSED WHITE 1 POINT 5 MM
Specification : FELT WOOLEN (PRESSED) WHITE UNPROOFED SOFT VARIETY 13.00MM THICK X 1320.8 MM TO SPECN: IS -1719-1988(3RD REVISION)WITH AMENDMENT NO. 1 JULY 1990
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
R
Estab
3) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
R
Estab
4) FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015
Description : FELT WOOL PRESSED WHITE 1 POINT 5 MM ITEM CODE 2101223015()
Specification : FELT WOOL PRESSED WHITE 1 POINT 5 MM
Specification : FELT WOOLEN (PRESSED) WHITE UNPROOFED SOFT VARIETY 13.00MM THICK X 1320.8 MM TO SPECN: IS -1719-1988(3RD REVISION)WITH AMENDMENT NO. 1 JULY 1990
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
Specification : WOOL FELT (PRESSED) WHITE UNPROOFED SOFT TYPE 3MM THICK X1320.8MM TO SPECN:- IS-1719:2000 (FOURTH REVISION).
R
Estab
2) WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172
Description : WOOL FELT PRESSED MEDIUM HARD 3MM ITEM CODE 2101222172()
Specification : WOOL FELT PRESSED MEDIUM HARD SIZE 3MM THICK X 1320MM WIDTH CONFIRMING TO IS:1719:1988 PROOFED WITH 0.25 TO 0.5%DINITRO ALPHA NAPHTHONOL (DNAN)
Specification : CLOTH ALL WOOL MELTON FINISH (BOX CLOTH) TO SPECN:-JSS-8305-16:2014(REVISION NO.3)
R
Estab
Category : s
Grade : 2
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138
Description : SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138()
Specification : SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)
R
Estab
2) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
Specification : ALUMINIUM PAINT FOR GENERAL PURPOSE IN DUAL CONTAINERS TYPE BRUSHING TO SPECN IS 2339 1963
R
Estab
4) PAINT PLASTIC EMULSION PALE GREEN ITEM CODE 1012112216
Description : PAINT PLASTIC EMULSION PALE GREEN ITEM CODE 1012112216()
Specification : PAINT PLASTIC EMULSION PALE GREEN TO SPECN IS 5411 1974 PT-1 (FIRST REVISION)
R
Estab
Category : s
Grade : 2
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138
Description : SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138()
Specification : SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)
R
Estab
2) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
Specification : ALUMINIUM PAINT FOR GENERAL PURPOSE IN DUAL CONTAINERS TYPE BRUSHING TO SPECN IS 2339 1963
R
Estab
4) PAINT PLASTIC EMULSION PALE GREEN ITEM CODE 1012112216
Description : PAINT PLASTIC EMULSION PALE GREEN ITEM CODE 1012112216()
Specification : PAINT PLASTIC EMULSION PALE GREEN TO SPECN IS 5411 1974 PT-1 (FIRST REVISION)
R
Estab
Category : s
Grade : 2
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138
Description : SILICA GEL BAGS WEIGHING 4 POINT 5 GMS PLUS MINUS ZERO POINT FIVE GMS ITEM CODE 1003250138()
Specification : SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6)
R
Estab
2) FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170
Description : FELT WOOL PRESSED WHITE 6 POINT 3 MM THICK ITEM CODE 2101222170()
Specification : WOOL FELT, PRESSED, WHITE, SOFT TYPE GENERAL PURPOSE SIZE 6.3 MM THICK X 1320.8 MM WIDE CONFORMING TO PHYSICAL AND CHEMICAL REQUIREMENTS TO IS: 1719:19:2000(FOURTH REVISION)(REAFFIRMED 2014) PROFED WITH 0.25 TO 0.5% OF DINITRO ALPHA NAPTH
Specification : ALUMINIUM PAINT FOR GENERAL PURPOSE IN DUAL CONTAINERS TYPE BRUSHING TO SPECN IS 2339 1963
R
Estab
4) PAINT PLASTIC EMULSION PALE GREEN ITEM CODE 1012112216
Description : PAINT PLASTIC EMULSION PALE GREEN ITEM CODE 1012112216()
Specification : PAINT PLASTIC EMULSION PALE GREEN TO SPECN IS 5411 1974 PT-1 (FIRST REVISION)
R
Estab
Category : s
Grade : 2
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) APC NO 5 ITEM CODE 1003103013
Description : APC NO 5 ITEM CODE 1003103013()
Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC
Specification : N.C. DOPE (APC NO. 236) TO SPECN:JSS-8010-62-2015 (REV. 3) DC NO. 5412-ME DT 31/03/2016. ADDED WITH 0.05% DYE RHODAMINEB BASE CONFIRMING JTO SPECIFICATION IND/ME/517 (A). NOTE: TO BE SUPPLIED IN GALVANISED IRON DRUMS.
R
Estab
9) ADHESIVE SS 89 IND ME 998 PROV ITEM CODE 1003010607
Description : ADHESIVE SS 89 IND ME 998 PROV ITEM CODE 1003010607()
Specification : ADHESIVE SS - 89 TO SPECN :IND/ME/998 (PROV) DC NO. 3842-ME DT. 04/04/2005
R
Estab
10) APC NO 213 VARN OIL BLUE RD1177 ITEM CODE 1013404219
Description : APC NO 213 VARN OIL BLUE RD1177 ITEM CODE 1013404219()
Specification : VARNISH OIL: BLUE, RD-1122, BRUSHING (APC NO 213 ) TO SPECN: JSS-8010-41:2014(REVISION NO. 4) DC NO. 5251-ME DT 18/06/14
R
Estab
Category : ddp
Grade : 2
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) APC NO 5 ITEM CODE 1003103013
Description : APC NO 5 ITEM CODE 1003103013()
Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC
Specification : N.C. DOPE (APC NO. 236) TO SPECN:JSS-8010-62-2015 (REV. 3) DC NO. 5412-ME DT 31/03/2016. ADDED WITH 0.05% DYE RHODAMINEB BASE CONFIRMING JTO SPECIFICATION IND/ME/517 (A). NOTE: TO BE SUPPLIED IN GALVANISED IRON DRUMS.
R
Estab
9) ADHESIVE SS 89 IND ME 998 PROV ITEM CODE 1003010607
Description : ADHESIVE SS 89 IND ME 998 PROV ITEM CODE 1003010607()
Specification : ADHESIVE SS - 89 TO SPECN :IND/ME/998 (PROV) DC NO. 3842-ME DT. 04/04/2005
R
Estab
10) APC NO 213 VARN OIL BLUE RD1177 ITEM CODE 1013404219
Description : APC NO 213 VARN OIL BLUE RD1177 ITEM CODE 1013404219()
Specification : VARNISH OIL: BLUE, RD-1122, BRUSHING (APC NO 213 ) TO SPECN: JSS-8010-41:2014(REVISION NO. 4) DC NO. 5251-ME DT 18/06/14
Specification : AMMUNITION PROTECTIVE COMPOSITION NO 11 TO SPECN. JSS-8030-24:2011 (REV NO. 2) DC NO. 5086-ME, DT 06.08.2012
R
Estab
2) APC NO 5 ITEM CODE 1003103013
Description : APC NO 5 ITEM CODE 1003103013()
Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC
Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 1 (CEMENT RD- 1158G) TO SPECN:- JSS:8030-16 DC (I) 2454- ME DT 30/7/83.
R
Estab
6) CEMENT ABS IND ME 890 PROV ITEM CODE 1003099704
Description : CEMENT ABS IND ME 890 PROV ITEM CODE 1003099704()
Specification : CEMENT ABS TO SPECN:- IND/ME/890 (PROV) DC NO. 3178-ME DT 4/10/94.
R
Estab
Category : s
Grade : 2
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) APC NO 5 ITEM CODE 1003103013
Description : APC NO 5 ITEM CODE 1003103013()
Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC
Specification : N.C. DOPE (APC NO. 236) TO SPECN:JSS-8010-62-2015 (REV. 3) DC NO. 5412-ME DT 31/03/2016. ADDED WITH 0.05% DYE RHODAMINEB BASE CONFIRMING JTO SPECIFICATION IND/ME/517 (A). NOTE: TO BE SUPPLIED IN GALVANISED IRON DRUMS.
R
Estab
9) ADHESIVE SS 89 IND ME 998 PROV ITEM CODE 1003010607
Description : ADHESIVE SS 89 IND ME 998 PROV ITEM CODE 1003010607()
Specification : ADHESIVE SS - 89 TO SPECN :IND/ME/998 (PROV) DC NO. 3842-ME DT. 04/04/2005
R
Estab
10) APC NO 213 VARN OIL BLUE RD1177 ITEM CODE 1013404219
Description : APC NO 213 VARN OIL BLUE RD1177 ITEM CODE 1013404219()
Specification : VARNISH OIL: BLUE, RD-1122, BRUSHING (APC NO 213 ) TO SPECN: JSS-8010-41:2014(REVISION NO. 4) DC NO. 5251-ME DT 18/06/14
Specification : AMMUNITION PROTECTIVE COMPOSITION NO 11 TO SPECN. JSS-8030-24:2011 (REV NO. 2) DC NO. 5086-ME, DT 06.08.2012
R
Estab
2) APC NO 5 ITEM CODE 1003103013
Description : APC NO 5 ITEM CODE 1003103013()
Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC
Specification : AMMUNITION PROTECTIVE COMPOSITION NO 11 TO SPECN. JSS-8030-24:2011 (REV NO. 2) DC NO. 5086-ME, DT 06.08.2012
R
Estab
2) APC NO 5 ITEM CODE 1003103013
Description : APC NO 5 ITEM CODE 1003103013()
Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC
