Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290
C
Nonestab
5) LAMP WANDERING 1A AS PER DRG NO MCT 3212[74]()
Specification : LAMP WANDERING 1A AS PER DRG.NO.MCT-3212
C
Nonestab
6) ETCHING ENGRAVING OF ARM RANGE TO DRG NO IRDE 285 6 MCT 2612[00]()
Specification : ETCHING/ENGRAVING OF ARM RANGE TO DRG.NO IRDE-285/6,MCT-2612. FOR PLOTTER 81MM MORTAR CASED 101A . NOTE-BLANK WILL BE SUPPLIED BY OFD.(EACH ARM RANGE SHOULD BE PACKED INDIVIDUALLY TO PROTECT SURFACE DAMAGES & SCRATCHES)
C
Nonestab
7) HOUSING OG DRG NO IRDE 1625 1[74]()
Specification : HOUSING OG DRG NO.IRDE-1625/1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) FRAME TO DRG NO MCT 1465 3[74]()
Specification : FRAME TO DRG NO. MCT-1465/3
C
Nonestab
2) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 AND CII 253 2[74]()
Specification : ARC, BEARING NO.3 MK 1(M-I) AS PER DRG.NO.: CII-253 COMPRISING WITH CII-253/1 & CII-253/2
C
Nonestab
3) ARM RANGE NO 3 MK 1 M 1 AS PER DRG NO CII 267 2 SHEETS CII 247 SHEET 3[74]()
Specification : ARM, RANGE NO.3 MK 1(M-1) AS PER DRG.NO.: CII-267(2 SHEETS) & CII-247 SHEET-3
C
Nonestab
4) ROMER NO 3 MK 1 L AS PER DRG NO C I A O S 562[74]()
Specification : ROMER NO.3 MK 1/L AS PER DRG.NO.: C.I.A.(O.S.)562
C
Nonestab
5) CAP COMPASS CORRECTION AS PER DRG NO MCT 3222[74]()
Specification : CAP COMPASS CORRECTION AS PER DRG. NO.MCT-3222
C
Nonestab
6) ARM RANGE NO 5 MK 1 M I AS PER DRG NO CII 247 3 SHEETS[74]()
Specification : ARM, RANGE NO.5 MK 1(M-I) AS PER DRG.NO.: CII-247(3 SHEETS)
C
Nonestab
7) OPTICAL ASSEMBLY MECHANICAL AS PER DRG NO IRDE 2048 A 1[74]()
Specification : OPTICAL ASSEMBLY MECHANICAL AS PER DRG.NO.:IRDE-2048/A-1
C
Nonestab
8) TRIPOD FIRE CONTROL INSTRUMENT NO 17A MK 2 M1 TO DRG NO MCT 2705 COMPLETE[74]()
Specification : TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG.NO.MCT-2705 COMPLETE FOR COLLIMETER INFINITY
C
Nonestab
9) OPTICAL COMPONENT ASSY TO DRG MCT 3139 IRDE 2048 SA 9[74]()
11) ROCKER BRACKET ASSEMBLY AS PER DRG NO GF 230107[74]()
Specification : ROCKER BRACKET ASSEMBLY AS PER DRG NO. GF -230107
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) SET OF COMPONENT COVER POD[74]()
Specification : SET OF COMPONENT COVER POD
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG. NO.MCT-2313, 2314 & 2315.[74]()
Specification : As per required Specification
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) Assy of eye piece left, MCT-3286[74]()
Specification : ASSY OF EYE PIECE, LEFT AS PER DRG. NO. MCT 3286
C
Nonestab
2) ASSY OF EYE PIECE, RIGHT, MCT-3285()
ASSY OF EYE PIECE, RIGHT,AS PER DRG, MCT-3285
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) PRISM HOUSING TO DRG NO MCT 1931[00]()
Specification : PRISM HOUSING TO DRG NO. MCT-1931
C
Nonestab
2) TUBE HOUSING DULY MACHINED AS PER DRG NO MCT 1990 1 FOR PNVG[74]()
Specification : TUBE HOUSING DULY MACHINED AS PER DRG. NO. MCT-1990/1 FOR PNVG.
C
Nonestab
3) HOUSING OG FINISHED TO DRG NO MCT 1514 1[74]()
Specification : HOUSING OG FINISHED TO DRG NO.MCT/1514/1
C
Nonestab
4) MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD[74]()
Specification : MACHINING OF HOUSING II TUBE AS PER DRG.NO. CWC/229/19/5 CASTING WILL BE SUPPLIED BY OFD
C
Nonestab
5) HOUSING FOR II TUBE AS PER DRG NO CWC 229 19 5 FOR PNS RIFLE LMG CGRL[74]()
Specification : HOUSING FOR II TUBE AS PER DRG.NO.CWC/229/19/5 FOR PNS 5.56 RIFLE/LMG/CGRL
C
Nonestab
6) MACHINING OF BODY TO DRG NO MCT 2470 1 CASTING WILL BE SUPPLIED BY OFD DUN[00]()
Specification : MACHINING OF BODY TO DRG.NO.MCT-2470/1 CASTING WILL BE SUPPLIED BY OFD.DUN.
C
Nonestab
7) MACHINING OF COVER TO DRG NO MCT 2471 1 CASTING WILL BE SUPPLIED BY ORD FACT DEHARDUN[00]()
Specification : MACHINING OF COVER TO DRG.NO.MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD.FACT. DEHARDUN.
C
Nonestab
8) MACHINING OF BODY RIGHT BINO 8X30 MCT 1252 2 NOTE CASTING LF 0020000691 WILL BE SUPPLIED BY OFD[74]()
Specification : MACHINING OF BODY RIGHT BINO 8X30 MCT-1252/2 NOTE- CASTING (LF:-0020000691) WILL BE SUPPLIED BY OFD
C
Nonestab
9) MACHINING OF BEARING BOTTOM TO DRG NO MCT 2900 1 MCT 2903 MCT 2904 FOR MOUNT TELESCOPE 102A[74]()
Specification : MACHINING OF BEARING BOTTOM TO DRG.NO. MCT-2900/1,MCT-2903,MCT-2904 FOR MOUNT TELESCOPE-102A. NOTE:-CASTING OF BEARING BOTTOM WILL BE PROVIDED BY OFDUN.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7[74]()
Specification : ELEVATION CURVE -557 TO DRG NO
CQA(I)-792/7
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV[74]()
Specification : SUPPORT TO DRG.NO.MCT-3115
FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV
Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290
C
Nonestab
12) HOUSING EP FINISHED TO DRG NO MCT 1515 1[74]()
Specification : HOUSING EP FINISHED TO DRG NO.MCT/1515/1
C
Nonestab
13) KNOB TO DRG MCT 1150 2 FOR SIGHT UNIT CASED 102B[74]()
Specification : KNOB TO DRG, MCT-1150/2
FOR SIGHT UNIT CASED 102B
C
Nonestab
14) LEVEL INDICATOR TO DRG NO MCT 3250 FOR CLINOMETER 2A 46[74]()
Specification : LEVEL INDICATOR TO DRG.NO.MCT-3250 FOR
CLINOMETER 2A 46
C
Nonestab
15) LEVER CONTROL HAND TO DRG NO MCT 3244 FOR SIGHT DIAL104A[74]()
Specification : LEVER CONTROL HAND TO DRG.NO.MCT-3244
FOR SIGHT DIAL104A
C
Nonestab
16) LEVER DRG NO CII 125[74]()
Specification : LEVER DRG.NO.CII-125
C
Nonestab
17) MACHINING OF BASE AS PER DRG NO MCT 3471 FOR MOUNT TELE 102A[74]()
Specification : MACHINING OF BASE AS PER DRG.NO. MCT-3471 FOR MOUNT TELE. 102A. NOTE:- CASTING WILL BE SUPPLIED BY OFD
C
Nonestab
18) MACHINING OF BASE PLATE TO DRG NO MCT 2464 1 CASTING[74]()
Specification : MACHINING OF BASE PLATE TO DRG.NO.MCT-2464/1 CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY OF DUN.
C
Nonestab
19) MACHINING OF BEARING MOUNTED MCT 2465 1 CASTING[74]()
Specification : MACHINING OF BEARING MOUNTED MCT-2465/1, CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN.
C
Nonestab
20) MACHINING OF BRACKET AS PER DRG NO MCT 3470 FOR MOUNT TELESCOPE 102A[74]()
Specification : MACHINING OF BRACKET AS PER DRG.NO.MCT-3470 FOR MOUNT TELESCOPE 102A, NOTE: CASTING WILL BE SUPPLIED BY OFDUN.
C
Nonestab
21) MACHINING OF CASING UPPER[74]()
Specification : MACHINING OF CASING UPPER AS PER DRG. NO.IRDE 1810/2 / MCT-2390/1 FOR COMMANDER DAY EPISCOPE. NOTE:SHATTER ALLOY CASTING AS PER DRG.NO ODD/C/826/2 WILL BE SUPPLIED BY OFD.
C
Nonestab
22) MACHINING OF CASTING TO DRG NO CWC 240 56 FOR HOUSING[74]()
Specification : MACHINING OF CASTING TO DRG.NO.CWC-240/56 FOR HOUSING
C
Nonestab
23) MACHINING OF FRAME BODY AS PER DRG MCT 2287 2 OF QUADRANT FIRE CONTROL[74]()
Specification : MACHINING OF FRAME(BODY) AS PER DRG MCT 2287/2 OF QUADRANT FIRE CONTROL. NOTE: CASTINGS OF BODY WILL BE SUPPLIED BY OFD.
C
Nonestab
24) MACHINING OF HOLDER UPPER PRISM[74]()
Specification : MACHINING OF HOLDER UPPER PRISM AS PER DRG.NO.IRDE 1808/6,/ MCT-2399 FOR DRIVES DAY SIGHT (CENTRAL) NOTE:CASTINGS AS PER ODD/C/964 WILL BE SUPPLIED BY OFD.
C
Nonestab
25) MACHINING OF HOUSING LOWER[74]()
Specification : MACHINING OF HOUSING LOWER AS PER DRG. NO.IRDE 1809/4/MCT-2389. FOR DRIVERS DAY SIGHT (SIDE) NOTE:CASTING AS PER ODD/C/965 WILL BE SUPPLIED BY OFD.
C
Nonestab
26) NAME PLATE DRG NO MCT 1726 2[74]()
Specification : NAME PLATE DRG NO.MCT-1726/2
C
Nonestab
27) NAME PLATE TO DRG NO MCT 2953 1 PLATE IDENTIFICATION FOR HR BINO 8X30R[74]()
Specification : "NAME PLATE TO DRG.NO.MCT-2953/1 (PLATE IDENTIFICATION) FOR HR BINO 8X30R.
"
Specification : PT.SCREW (KA 22X14 WN 1412) FOR H.R.BINO
C
Nonestab
36) PT SCREW 1452 FOR H R BINO[17]()
Specification : PT.SCREW (K18X10WN 1452) FOR H.R.BINO
C
Nonestab
37) RING WITH DIVISIONS AS PER DRG NO MCT 3268A FOR CLINOMETER 2A 46[74]()
Specification : RING WITH DIVISIONS AS PER DRG.NO. MCT-3268A FOR CLINOMETER 2A(46)
C
Nonestab
38) SET OF DIAL SCALE CONSIST OF 2 COMPONENT 1 DIAL SCALE VERTICAL MCT2514 1 2DIAL SCALE LATERAL MCT 2515 1[74]()
Specification : SET OF DIAL SCALE,CONSIST.OF 2 COMPONENT 1.DIAL SCALE ,VERTICAL. MCT-2514/1 1/SET .2.DIAL SCALE,LATERAL MCT-2515/1 1/SET
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) LINK CARTG. METALLIC BELT 7.62MM M13()
Specification : TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 &
TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004
(II) JSS : 0465-01-1994 (REVISION NO. 1)
NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG.
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Nonestab
2) RING NUT 450 KG (6230900904)[60]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9.
DRG. ENCLOSED.
C
Nonestab
3) HEX SOCKET SET SCREW 450 KG 6230001304[62]()
Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP).
5) HEX SOCKET SET SCREW BT 450 KG 1727041225[17]()
Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP)
C
Nonestab
6) SOCKET SET SCREW FOR BASE TRANSIT 1751020207[17]()
Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED].
C
Nonestab
7) TA WASHER T-90 (6120100106)[61]()
Specification : TA WASHER TO DRG.NO.OFM-32839.
C
Nonestab
8) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Nonestab
9) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Nonestab
10) RING NUT 250 KG (6240900904)[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/
9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
11) HEX SOCKET HD CAP SCREW M6X25 1732040625[17]()
Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT].
C
Nonestab
12) HEX SOCKET SET SCREW M5 450KG 6230901104[62]()
Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP)
C
Nonestab
13) SCEWFOR RING NUT 6220900800[62]()
Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED]
C
Nonestab
14) LOCKING SCREW FOR CONT EXPLODER 6220900710[62]()
Specification : LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18] [DRG. ENCLOSED].
C
Nonestab
15) TA BOLT M20 X 1 POINT 5 6G 6120100257[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
16) TA BOLT M27 X 1 POINT 5 6G[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
17) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
18) MACHINING OF LUG 318[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
19) LUG HOUSING 250 KG (6240100114)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) TRANSISTOR 2T874A LF NO 7441121064[74]()
Specification : TRANSISTOR 2T874A Drg No.AAO.339.571TU TRANSISTOR 2T874A AS PER SPECN. NO. AAO.339.571TU
C
Nonestab
2) 9001120190 DIODE 2D102A1[90]()
Specification : 9001120190 DIODE 2D102A1/BB
Drg No.SPECNNO:AEYAR.432120.444TY
DIODE 2D102A1/BB AS PER SPECN.
NO.AEYAR 432120.444TY
C
Nonestab
3) 7440101144 SOCKET[74]()
Specification : 7440101144 SOCKET WITH METALLIC PROTECTIVE CAP 2RM18KPE7G1V1 AS PER
SPECN. NO. GEO.364.126 TY, JS
S-50860
FOR CABLE SET IUMK305651.002
C
Nonestab
4) 9001120853 RELAY REK63V[90]()
Specification : 9001120853 RELAY REK63V RVIM.647612029-04
Drg No.RVIM.647612.029TU
RELAY, REK 63V,RVIM.647612.029
-04
AS PER SPEC. NO. RVIM.647612.0
C
Nonestab
5) 7441121539 SWITCH TOGGLE SP ON NONE ON[74]()
Specification : 7441121539
SWITCH TOGGLE SP ON NONE ON (H
ARNESS COMPONENT)
AS PER OEM PART NO. 5636ABX40
8 MAKE- APEM COMPONENTS INC,
C
Nonestab
6) 7441120089 TRANSISTOR 2T312V[74]()
Specification : 7441120089 TRANSISTOR 2T312V
Drg No.ZHK3.365.143 TU
TRANSISTOR 2T312V
AS PER DRG./SPECN. NO.ZHK3.365
.143 TU
C
Nonestab
7) 7441121805 RELAY[74]()
Specification : 7441121805 RELAY REK-87V IDYAU 647611.001
Drg No.IDYAU 647611.001 TY
RELAY REK-87V IDYAU 647611.001
-14 AS PER SPECN. NO.
IDYAU 647611.001
C
Nonestab
8) 9927097575 SWITCH MP 12[99]()
Specification : 9927097575
SWITCH MP-12 AS PER SPECN.NO.
OU3.602.069 TY
C
Nonestab
9) 9001120760 RESISTOR S5[90]()
Specification : 9001120760
RESISTOR S5-5-2WATT-100 OHM, +
/- 1%
AS PER SPECIICATION NO OZHO.46
7.505 TY
C
Nonestab
10) 9927089442 RESISTOR S5[99]()
Specification : 9927089442 RESISTOR S5-5-2W-160 OHM, 1%
WIRE WOUND RESISTOR S5-5-2W-16
0 OHM +/- 1%
AS PER SPECIFICATION NO OZHO 4
67.505 TU
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HYBRID MICRO CIRCUIT BMC -1271[74]()
Specification : HYBRID MICRO CIRCUIT BMC -1271
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) CASE FOR SIGHT UNIT CASED 102B TO DRAWING NO IRDE 1131 COMPLETE SWO 37546[74]()
Specification : CASE, TO DRG. NO. IRDE-1131 (COMPLETE) SWO. 37546 FOR S.U. CASED-102B
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) knob assembly 502[74]()
Specification : knob (502+441) assembly as per drg. no. MCT-3487
C
Nonestab
2) knob assembly 751[74]()
Specification : knob assembly (751+441) as per MCT 3478
C
Nonestab
3) Needle Valve Carburator MCT 3215[74]()
Specification : Needle Valve Carburator MCT 3215
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) knob assembly 502[74]()
Specification : knob (502+441) assembly as per drg. no. MCT-3487
C
Estab
2) knob assembly 751[74]()
Specification : knob assembly (751+441) as per MCT 3478
C
Estab
3) Needle Valve Carburator MCT 3215[74]()
Specification : Needle Valve Carburator MCT 3215
C
Estab
4) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 CII 253 2[74]()
Specification :
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) RECEIVER FOR GPMG WITHOUT HEAT TREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Ejector 9 mm for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 007 00DA[70]()
Specification : Ejector 9 mm for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 007 00DA
C
Nonestab
2) Screw Barrel Mount for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 004 00DA[70]()
Specification : Screw Barrel Mount for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 004 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) OG. ASSY COMPRISING OF FOLLOWINGS:-(A).RING, LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER, OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.
Description : OG. ASSY COMPRISING OF FOLLOWINGS:-(A).RING, LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER, OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.()
Specification : AS PER SPECIFICATION
C
Estab
2) EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS
Description : EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS()
Specification : "EYE PIECE WITHOUT EYE PIECE -II CONSISTING OF 2 COMPONENTS:- 1.EYE PIECE SPACER RING DRG. MCT-2509,1/SET, 2. EYEPIECE SCREW RING TO DRG., MCT-2504,1/SET . FOER TELE,SIGHTING-MK-III.
C
Estab
3) MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD
Description : MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD()
Specification : MACHINING OF HOUSING II TUBE AS PER DRG.NO. CWC/229/19/5 CASTING WILL BE SUPPLIED BY OFD
C
Estab
Category : p
Grade : 2
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Plate Armature in finished condition[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I)-393/36 to DS CAT No. 6115-001170
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Plate Armature in finished condition[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magnet Permanent for Firing Device[70]()
Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
2062
SIDDHI FORGE PRIVATE LIMITED
PLOT NO L-3/1,MIDC AREA MIDC AREA AHMEDNAGAR Maharashtra
PIN1 : 414111
Phone No. : 6610229 GSTIN : 27AADCS2404G1ZP
Specification : CONVERSION OF BOAT TAIL FORGING (IN HEAT TREATED CONDITIO) AS PER REF. DRG. F-448 J (OR LATEST ISSUE) IN TO BOAT TAIL MACHINED TO CQA (A) DRG. NO. 155-1150 COMPLETE WITH ANODIZING & PAINTING. INPUT MATERIAL FOR CONVERSION WILL BE PROVIDED
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()
Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BOLT BREECH FROM FORGING TO TEND DRG.NO 2369 required for 0.315" Sporting Rifle[00]()
Specification : AS PER TEND DRG.NO 2369 required for 0.315" Sporting Rifle
C
Nonestab
2) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle
C
Nonestab
3) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BOLT BREECH FROM FORGING TO DRGNO 29P 0013STAR M required for 0POINT0315 Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
2) BLOCK GAS FORGING TO DRG NORFI SK 2132 E FOR RIFLE 7POINT62 MM 1A1 WITH FIRMS MATERIAL ICR1322[70]()
Specification : AS PER DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)
C
Nonestab
3) HAMMER FORGINGS TO DRG M6 0001E FOR RIFLE 7POINT62 MM 1A1 WITH FIRMS MATERIAL ICR 1256 FULLY FINISHED CONDITION 5000 NOS 2500 SETS[70]()
Specification : AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)
C
Nonestab
4) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO D S CAT NO 1005 001514 ICR 1325 I DC NO 26759 SA DT 29 05 2015 SHEETI II DC NO 26766 SA DT 02 07 2015 SHEET II FROM FORGING TO DRG NO RF SK 725 IL[00]()
Specification : AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL
C
Nonestab
5) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()
Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) HALF COUPLING FORGING[71]()
Specification : HALF COUPLING FORGING FOR HALF COULPLING TO DRG NO 2A46.21-20-3 SPECN. 655 M 13 TO BS-970 PT-I-83.
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]()
Specification : St. Forging Plate Bottom to DRG No. SKM-283*2
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]()
Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
C
Estab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Al FORGING FOR BODY COVER for MAG[61]()
Specification : AL.FORGING FOR BODY COVER DRG.NO. SKM-174*
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
C
Estab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]()
Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.
3) Forging of Breech Block slide DS CAT no. 281*2[04]()
Specification : AS PER DRG.
C
Nonestab
4) St. Forging Buffer Body DRG. No SKM 304*1[01]()
Specification : DRG. No SKM 304*1
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : Steel Forging Block Gas for JVPC, Drg. No. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]()
Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.
C
Estab
2) St Forging Plate Bottom for MAG[01]()
Specification : DRG No. SKM-283*2
C
Estab
3) ST FORGING BUFFER BODY FOR MAG[01]()
Specification : DRG. NO. SKM-304*1
C
Estab
4) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Estab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT
Description : FORGING RECEIVER GUIDE FRONT RIGHT()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*3
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN LOCKING TRIGGER MECH-9MM[70]()
Specification : PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Forging of Guide Front Right DRG. no. SKM-305*2[04]()
Specification : Forging Guide Front Right SKM-305*2
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TA LINK HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPEFICIFICATION
C
Nonestab
2) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Nonestab
3) RING NUT 450 KG (6230900904)[60]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9.
DRG. ENCLOSED.
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788.
C
Nonestab
5) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
6) Washer for 1000lbs (6220901111)[62]()
Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO
IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY
C
Nonestab
7) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
8) TA LINK FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
9) SET OF TA SHOE AND TA GUIDE FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
10) TA CLAMP FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
11) TA LINK MACHINED FOLLOWED BY FORGING[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
12) SET OF TA SHOE AND TA GUIDE MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
13) TA CLAMP MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
14) TA WASHER T-90 (6120100106)[61]()
Specification : TA WASHER TO DRG.NO.OFM-32839.
C
Nonestab
15) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
C
Nonestab
16) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Nonestab
17) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Nonestab
18) RING NUT 250 KG (6240900904)[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/
9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
19) TA CLAMP HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
20) SET OF TA SHOE TA GUIDE HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade I
Size :
M
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Forging of Guide Front Right DRG. no. SKM-305*2
Description : Forging of Guide Front Right DRG. no. SKM-305*2()
Specification : Forging Guide Front Right SKM-305*2
Specification : POWER STEERING CONSISTING OF 4 ITEMS I.POWER STG.PUMP(STG.G.PT.NO.275546600101 RANE OR-ZF 275446600103 II.ASSY UNIVERSAL JOINT PT.NO.257346200108 RANE OR-ZF 257346200106.III POWER STEERING GEAR BOX PT.NO.257446600101 RANE OR-ZF 215446600
1) BODY BARREL LOCKING CATCH DS CAT 1005-006830[70]()
Specification : AS PER DRG DS CAT 1005-006830
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Barrel Locking Catch[70]()
Specification : BODY BARREL LOCKING CATCH,DS CAT NO 1005-006830 DC(I) NO 254 00-SA DT 18-06-02 (WITH SAF MATERIAL IN LF NO 0145032065 ST FLAT 10X25 MM SPEC BS:970-PT-1:1983 GR. 070 M55 AGAINST BANK GUARANTEE)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.[70]()
Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) LINK CROSS PIECE LONG DSCATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02[70]()
Specification : LINK CROSS PIECE LONG DS CATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) LINK ROLLER for MAG 7 62MM[70]()
Specification : LINK ROLLER TO DS CAT NO.1005-000467 DC(I)25298 SA DT. 19.3.02 IN FINISHED CONDITION. (STRD.10MMDIA GD-534A99WILL BE SUPPLIED BY SAF ON B/G LF0352002010)
AS PER DRG.
C
Nonestab
2) PLUNGER CATCH FOR MAG[70]()
Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Nonestab
3) LEVER CLAMPING REAR LEG ASSY for MAG[72]()
Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06
C
Nonestab
4) SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROTECTOR SUPPORT SCREW FOR MAG[70]()
Specification : DS CAT NO. 5305-011218 DC (I) NO.27020-SA DT. 28.01.17 IN FINISHED CONDITION.
C
Nonestab
5) NUT CLAMPING LEVER for MAG[71]()
Specification : NUT CLAMPING,LEVER TO DS CAT NO. 5310-003306 DC(I) NO. 24091-SA DT- 28.4.98 IN FINISHED CONDITION.
C
Nonestab
6) NUT LOCKING BARREL for MAG[70]()
Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
2) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Nonestab
3) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56MM AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.
C
Nonestab
4) Hammer for JVPC[70]()
Specification : HAMMER FOR JVPC 5.56MM
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]()
Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]()
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
C
Nonestab
8) FORGING OF TA LINK (6120100104)[61]()
Specification : FORGING FOR T.A.LINK TO DRG.NO.OFM-32851. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS
TECH/04.
C
Nonestab
9) FORGING OF TA GUIDE (6120100103)[61]()
Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03.
C
Nonestab
10) FORGING OF TA CLAMP (6120100102)[61]()
Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED.
C
Nonestab
11) FORGING OF TA SHOE (6120100101)[61]()
Specification : FORGING FOR T.A.SHOE TO DRG.NO.OFM-32848 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No-OFM/TDS/TECH/01 ENCLOSED.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) DETONATOR HOLDER 1000 LBS (6220900700)[62]()
Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE
TREATMENT) [DRG. ENCLOSED]
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING HOLDER 250 KG (6240100124)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) Nose Plug 250KG (6240900504)[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED).
DRG. ENCLOSED
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) NOSE PLUG 450KG (6230900504)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7
[DRG. ENCLOSED]. [W/O SURFACE TREATED.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) Nose Plug 1000LBS(6220901044)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE
TREATED]. [DRG. ENCLOSED.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FILLING PLUG ( 250 KG) (6240000504)[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FILLING PLUG ( 450 KG)(6230400504)[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10.
[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG (MCD) 250KG (6240901205)[62]()
Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED]
DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG 450 KG (MCD) (6231101105)[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122
DET 14. [DRG. ENCLOSED].
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG DUMMY 250 KG (6241101114)[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5
SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG A/C 34 1000 LBS (6220501010)[62]()
Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE
TREATED/CAD.PLATED)
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG FASTENING 250 KG (6241101124)[62]()
Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01
DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TA WASHER T-90 (6120100106)[61]()
Specification : TA WASHER TO DRG.NO.OFM-32839.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG (MCD) 250KG[62]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
2) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
C
Nonestab
3) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Estab
4) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Nonestab
5) PLUG REAR (6250000501)[62]()
Specification : PLUG REAR TO DRG.No. OFM/30858 [BASED ON ITV 52. [DRG.ENCLOSED]
C
Nonestab
6) SET OF TA SHOE AND TA GUIDE MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
7) SET OF TA SHOE AND TA GUIDE FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
8) TA CLAMP MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
9) TA LINK MACHINED FOLLOWED BY FORGING[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
10) TRACK LINK DRG. NO. 172.55.012[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Striker Rod as Per Drg.No.SK-9314 (01)[65]()
Specification : As per Drg.No SK-9314
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Container Cartridge As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1[62]()
Specification : SUSPENSION LUG.
SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB[42]()
Specification : FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
AS PER TERMS & CONDITIONS OF ANNEXURE 'A' ATTACHED
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310-A/FORGE AND TERMS & CONDITIONS ENCLOSED[66]()
Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB
AS PER GIF DRAWING NO. 5310-A/FORGE
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
2) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
3) BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)[00]()
Specification : AS PER DRG OF BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)
C
Nonestab
4) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
5) BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2097 REQUIRED FOR C1079 RIB RAW MATERIAL STEEL ROUND 56MM WILL BE SUPPLIED BY OFT[00]()
Specification : AS PER DRG OF BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2097
REQUIRED FOR C1079 RIB RAW MATERIAL STEEL ROUND 56MM WILL BE SUPPLIED BY OFT
C
Nonestab
6) BLOCK GAS FORGING TO DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)[70]()
Specification : AS PER DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)
C
Nonestab
7) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]()
Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
C
Nonestab
8) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle
C
Nonestab
9) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]()
Specification : AS PER DRG NO TEND 2383 STR 2
C
Nonestab
10) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
11) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
12) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()
Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL
C
Nonestab
13) CARRIER BREECH BLOCK TO DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)[70]()
Specification : AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)
Specification : AS PER DRG TO CONVERSION FORGING DRG.No. 64C 1026 200 E3
REQUIRED FOR HOLDER C1026
C
Nonestab
18) CONVERSION FORGING TO DRG 64C 5042 200 E3 REQUIRED FOR SEAR TO DRG. NO. 2A42.05.042 (C5042)[00]()
Specification : AS PER DRG TO CONVERSION FORGING TO DRG 64C 5042 200 E3 REQUIRED FOR SEAR TO DRG. NO. 2A42.05.042 (C5042)
C
Nonestab
19) CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093[00]()
Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR
FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
C
Nonestab
20) CONVERSION FORGING TO DRG. NO 62C 5012 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQUIRED FOR LINK STRIPPER A5012 TO DS.CAT.No: 1005-007410.[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG. NO 62C 5012 200 C3
MATERIAL WILL BE SUPPLIED BY OFT
REQUIRED FOR LINK STRIPPER A5012 TO DS.CAT.No: 1005-007410."
C
Nonestab
21) FORGING TO DRG 64C 2007 200 E3. WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007[70]()
Specification : AS PER DRG OF FORGING TO DRG 64C 2007 200 E3.
WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
C
Nonestab
22) CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015)[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015) "
C
Nonestab
23) CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)[00]()
Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 2009 200 G3
REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)
C
Nonestab
24) DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3[70]()
Specification : AS PER DRG OF "DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3
"
C
Nonestab
25) CONVERSION FORGING TO DRG.NO.: 62C 3801 200 B3. FOR LEAF SIGHT REAR (A3801) DSCAT No.1005-007290[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 3801 200 B3. FOR LEAF SIGHT REAR (A3801) DSCAT No.1005-007290
"
C
Nonestab
26) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle[03]()
Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
1) SEMI MACHINE UNION RING TO DRG NO.ISX-492 DC NO.37341-A DT.6/9/2013[62]()
Specification : AS PER DRG.& SPECIFICATION
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 FOR 51 mm MORTAR BOMB[62]()
Specification : MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 FOR 51 mm MORTAR BOMB
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER BUSH FOR 81MM SMOKE GRENADE_9911358269[99]()
Specification : ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878-A DTD. 20/12/94
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BASE PLATE 7.8 mm[61]()
Specification : BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001 NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BASE PLATE 7.8 mm[61]()
Specification : BASE PLATE 7.8 mm TO DRG NO F-1301-015080-K DC 36862-A DATE 11-11-02 SPECN:-F-1301-901520-L(b) (CQA-0305) DC NO.36766-ADT 14-7-2001 NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 7.8 MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AV
C
Nonestab
2) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
3) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
4) TAIL UNIT NO- TB 250 (9911358363)[99]()
Specification : TAIL UNIT NO.TB-250,DRG.NO.ARDE-9501-03 DT.19 APR 2000.AND SPECN.NO.ARDE/SPECN./613 PROVISIONALLY APPROVED ON 19 APR2000 AND AMENDED VIDE RCMA(AA)/1440/5/TECH DATED 29 APR 2010.PACKAGE DESCRIPTION-BOX STEEL NO.1 MK-I TO HOLD 1 TO DRG.NO.AR
R
Nonestab
5) TAIL UNIT NO-1111 FOR 1000 LBS (9911358361)[99]()
Specification : TAIL UNIT NO.-1111 TO DRG.NO.ARDE-2139 DET.NO.1,2 SHTS,SHT NO.1,R NO.2 DATE 18-10-96 AND SHT NO.2 R NO.2 DT.02-12-2002AND SPECN.NO.ARDE/SPECN./459 PROVISIONALLY APPROVED ON 16JULY 1992.PACKAGE DESCRIPTION-CONTAINER FOR TU NO.1111 TODRG.NO.
R
Nonestab
6) TAIL UNIT NO-2211 (BTU 450) (9911358362)[99]()
Specification : TAIL UNIT NO.-2211 (B.T.U.-450) DRG.NO.ARDE-2121,R.NO.3 DATE 20-09-2014 AND SPECN NO.ARDE/SPECN./390 PROVISIONALLYAPPROVED ON 27 NOV 1990.PACKAGE DESCRIPTION-BOX WOOD NO.P21MK-I TO HOLD 1 BTU 2211 TO DRG.NO.ARDE 2173,SHEET NO.-03,SHEET NO.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Engine Factory Avadi
Name
Specification
Use
Status
1) Thrust Bearing.[62]()
Specification : Thrust Bearing.
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MANUFACTURING OF T.A PIN ( 37 MM RODS ) & MANUFACTURING OF T.A. PIN (33 MM RODS)[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ROD JACKET, ( CASTING) TO DRG.NO. GCF TM-0001(C).REF DRG NO 2A26-08-38.[90]()
Specification : ROD JACKET, ( CASTING) TO DRG.NO. GCF TM-0001(C).REF DRG NO 2A26-08-38.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SPACER TO PART NO 5050983[90]()
Specification : SPACER TO PART NO 5050983
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]()
Specification : AS PER DRAWING.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) MACHINING OF CYLINDER AS PER DRG. NO. AAIW/BS-0069.[22]()
Specification : MACHINING OF CYLINDER AS PER DRG. NO. AAIW/BS-0069.
MACHINING OF CYLINDER AS PER DRG NO.AAIW/BS-0069.
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) TAIL UNITASSEMBLY[62]()
Specification : TAIL UNIT ASSEMBLY TO DRG.NO.AAIW/BS-0071
CONSISTING OF CONE TO DRG NO. AAIW/BS-0071/1, STABILISER FIN TO DRG NO. AAIW/BS-0071/2, STABILISER RING ASSEMBLY TO DRG NO. AAIW/BS-0071/3, AND BASE BUSH TO DRG NO. AAIW/BS-0071/4.
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
2065
RMV MACHINES AND TOOLS INDUSTRY LLP
PLOT NO.: 781 M, VILLAGE CHIRAURA PARGANA TEHSIL AKBARPUR RANIA INDUSTRIAL AREA VILLAGE CHIRAURA PARGANA TEHSIL AKBARPUR RANIA INDUSTRIAL AREA KANPUR DEHAT Uttar Pradesh
PIN1 : 209304
Phone No. : 2217804 GSTIN : 09AAVFR1895F1ZH
5) 9081005510 HEX SCREW BOF STD NO N2 140 8X40[90]()
Specification : HEXAGON SCREW,METRIC SCREW THREADSTRENGTH GRADE 8.8,ZINC
PLATED N2-140-8X40 TO ARTICLE NO. 10648459
MAKE : TVS/UNBRAKO/LPS/WURTH
C
Nonestab
6) 9081005550 HEX SOCKET SET SCREWS N2 98 8X10[90]()
Specification : HEXAGON SOCKET SET SCREWS WITH DOG POINT,METRIC THREAD,
UNTREATED BLACK BOF STD : N2-98-8X10 TO ARTICLE NO.
10417445.TVS/UNBRAKO/LPS/WURTH
C
Nonestab
7) 9081005571 CROSS REC COUNTERSUNK FL HEAD SCR[90]()
Specification : CROSS RECESSED COUNTERSUNK FLAT HEAD SCREW N2-163-6X20 TO
ARTICLE NO.10810370
MAKE:- TVS/UNBRAKO/LPS/WURTH
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING OF LIST 5189617[90]()
Specification : AS PER TENDER NO. 160367FHFO ON E-PROC. PORTAL
1) 9081005703 LOCK LID CAP TO DRAWING NO RP971674[90]()
Specification : LOCK/LID(CAP) TO DRAWING NO.RP 971674
C
Nonestab
2) 9081005704 LOCK LID CAP TO DRAWING NO RP971675[90]()
Specification : LOCK LID(CAP) TO DRAWING NO.RP 971675
C
Nonestab
3) 9081005707 FUEL CAN CONNECTION DRG NO 5182988[90]()
Specification : FUEL CAN CONNECTION TO DRAWING.NO.5182988 TO DRG.NO-GCF/50/ 39943
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BRACKET TO DRAWING NO 1147152[90]()
Specification : BRACKET TO DRAWING NO.1147152
R
Nonestab
2) BRACKET TO DRAWING NO 1147761[90]()
Specification : BRACKET TO DRAWING NO.1147761
C
Nonestab
3) BRACKET TO DRAWING NO 1147762[90]()
Specification : BRACKET TO DRAWING NO.1147762
C
Nonestab
4) BRACKET TO DRG NO 4076048[90]()
Specification : BRACKET TO DRG.NO.4076048.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHELL BODY BLANK TO OFK DRG 839L LF 6170444600[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL[70]()
Specification : BUTT ASSEMBLY AS PER DRG NO PKM 7200 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7119033641 BODY[71]()
Specification : BODY TO DER NO 175-47-014-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7119033597 PROOF MACHINED CASTING FOR HOUSING TO DRG NO 188 94 001 10[71]()
Specification : DRG.NO.188-94-001-10
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Forging for BREECH BLOCK DETENT[00]()
Specification : C 3029
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
3) BOLT STOCK WITH WASHERS AS ONE SET CONSISTING BOLT STOCK TO DR NO 29P 0043STAR SP 43 10 NOS WASHER BOLT STOCK TO DRG NO 29P 0066 SP 66 11 NOS WASHER SPRING BOLT STOCK TO DRG NO 29P 0069 SP69 11 NOS required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG
C
Nonestab
4) DETENT HANDLE BASE BARREL FOR 12 7 MM A D GUN A1216 INV CA STING TO DRG NO 62C 1216 250 D3[70]()
Specification : AS PER DRG OF "DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3
"
C
Nonestab
5) CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12 7 MM AD GUN A 2212[70]()
Specification : AS PER DRG OF "CASTING TO DRG NO 62C 2212 250 D3 BRACKET HANDLE FOR 12.7 MM AD GUN (A 2212)
"
C
Nonestab
6) CONVERSION FORGING TO DRG NO 2C 2464 200 C3 MATERIAL WILL BE ISSUED BY OFT REQD FOR EJECTOR SMALL ARM CARTRIDGE A2464[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2464 200 C3 MATERIAL WILL BE ISSUED BY OFT
REQD FOR EJECTOR SMALL ARM CARTRIDGE A2464
"
C
Nonestab
7) INVESTMENT CASTING TO DRG No 62C 2463 250 G3 FOR HOUSING EJECTOR[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3.
FOR HOUSING EJECTOR."
C
Nonestab
8) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071[70]()
Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071
C
Nonestab
9) REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL[70]()
Specification : REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL
C
Nonestab
10) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
11) CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637[70]()
Specification : CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637
C
Nonestab
12) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
C
Nonestab
13) BLANKS OF COMPONENTS NOS G 1102 S 1002 AND A 1003[70]()
Specification : As per OFT requirements
C
Nonestab
14) BASE BRACKET FOR SIGHT CASTING DRG 6PH 1 5[70]()
Specification : As per OFT requirements
C
Nonestab
15) BRACKET CATCH REAR COVER 6P 11 6 20 DRG NO 62 C 6020 250 H3[70]()
Specification : AS PER DRAWING BRACKET CATCH REAR COVER 6P 11 6 20 DRG NO 62 C 6020 250 H3
C
Nonestab
16) BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3[70]()
Specification : AS PER DRAWING BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3
C
Nonestab
17) 62C 9616 250 A3 CASTING CRADLE MOUNT ASSY[70]()
Specification : AS PER DRAWING 62C 9616 250 A3 CASTING CRADLE MOUNT ASSY
E
Nonestab
18) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
19) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PAD PART NO 6414645 FOR 84MM SMOKE LF 9911358501[99]()
Specification : PAD PART NO.6414645 TO OEM DRG NO.304061730/ TRD DRG NO.1.2.2768
R
Nonestab
2) CABLE TIE PART NO 4102077 LF 2101779000[21]()
Specification : CABLE TIE PART NO. 4102077 TO OEM DRG NO.304094816/TRD DRG NO.3.2.2674
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081001243 LINKAGE SYSTEM PART NO 1137083[90]()
Specification : LINKAGE SYSTEM AS PER THE DESCRIPTION AND BILL OF MATERIAL
(enclosed) OF PART NO 1137083.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PRIMARY CARTRIDGE KEY 1398 000099[90]()
Specification : PRIMARY CARTRIDGE KEY TO DS CAT NO 1398-000099, PT NO. AMG 72924.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081001250 COVER PART NO 1155764[90]()
Specification : AS PER PART A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) Change over switch Assembly 2A26 cb 10 49 cb[90]()
Specification : Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)
C
Nonestab
2) SWITCH ASSY AND AXLE WITH LEVER[90]()
Specification : SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL ENCLOSED PART NO 1156282[90]()
Specification : LOADING DEVICE AS PER THE DESCRIPTION AND BILL OF MATERIAL(ENCLOSED) PART NO 1156282.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HALF RING TO 6201081084[62]()
Specification : HALF RING TO DRG. NO. 188.81.058
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ELEVATING MECHANISM ASSY TO 6201215005[62]()
Specification : ELEVATING MECHANISM ASSY TO DRG. NO. 188.15.058CB-2CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CARRIER TO 6206203009[62]()
Specification : CARRIER TO DRG NO. 172.18.027CB
C
Nonestab
2) ROLLER SUPPORT TO 6206203018[62]()
Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB
C
Estab
3) DISC TRACK DRIVE SPROCKET TO 6206414029[62]()
Specification : DISC TRACK DRIVE SPROCKET TO DRG NO. 172.54.002CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LOCK HANDLE TO 6206110002[62]()
Specification : LOCK HANDLE TO 172.11.034CBCB
C
Nonestab
2) SHAFT TO 6206102068[62]()
Specification : SHAFT TO DRG NO.175.02.046CB-2CB
C
Nonestab
3) SUPPORTING CLAMP TO 6206802014[62]()
Specification : SUPPORTING CLAMP TO DRG NO. 172.03.038CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Machining of Axle primer housing lock to drg no 161 637 as per specn no 010 OFC GS II Axle primer housing lock dt 06 08 2020[63]()
Specification : Machining of Axle primer housing lock to drg.no. 161-637 as per specn. no. 010/OFC/GS-II/Axle primer housing lock dt. 06/08/2020.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) HOLDER AS PER DRG NO D 4078830 Rev A[63]()
Specification : HOLDER AS PER DRG NO D-4078830 REV A FOR BOFORS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
C
Nonestab
2) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
3) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 8 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 6[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 8 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 6
C
Nonestab
5) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
6) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
7) 62C 7006 200 D3 SAFETY LOCKING BOLT COMPONENT DRG NO 6 P 11 7 6[70]()
Specification : AS PER DRAWING 62C 7006 200 D3 SAFETY LOCKING BOLT COMPONENT DRG NO 6 P 11 7 6
5) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]()
Specification : DRG.NO.-ADRDE/PAS/2007/16.
R
Nonestab
6) NIV PACK FRAME[2110008014]()
Specification : FOR - DRAWING NO.CQA(GS)/US/557
READ- DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019
C
Nonestab
7) CONNECTING LUG OF AUXILIARY PARACHUTE[2110071008]()
Specification : DRG.NO.:ADRDE/1301 (a) DRD/43/98.
R
Nonestab
8) CROSS CONNECTOR STRAP SAFETY PIN[2110019020]()
Specification : DRG.NO.ADRDE/1390
R
Nonestab
9) PIN ASSEMBLY[2010071032]()
Specification : DRG.NO.ADRDE/PAS/2008/23
R
Nonestab
10) FEMALE COUPLING FOR CWL[2110075039]()
Specification : DRG. NO. ADRDE/1344(b)
R
Nonestab
11) SUSPENSION LUG[9911025377]()
Specification : PROV.DRG. NO.ADRDE/114(c)
R
Nonestab
12) ASSEMBLY CONNECTING LUG[2110075042]()
Specification : Drawing No. ADRDE/1339(b)
R
Nonestab
13) MODIFIED COIL SPRING for BP Mig 21[2110005017]()
Specification : ADRDE/271(c) NOTE – FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]()
Specification : DRAWING NO. : JSS 1670-05 : 2013
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]()
Specification : ADRDE/1210(c)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK STATIC LINE PTR M WITH SAFETY PIN[2110017018]()
Specification : DRAWING NO JSS: 5340-05:2014
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]()
Specification : DRAWING NO. : JSS 1670-05 : 2013
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]()
Specification : ADRDE/1210(c)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Mounting 81MM Mortar E 1 General Assembly to Part No AMG 72895 DS CAT No 1015 001480 Drgs Specifications of Sub Assemblies Components as per Annexure No 81MM MOR ODC Annexure 002 for assembly of 81MM Mortar Ordnance[63]()
Specification : Mounting, 81MM Mortar E-1 (General Assembly) to Part No. AMG 72895 (DS CAT No. 1015-001480), Drgs, Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/Annexure/002 for assembly of 81MM Mortar Ordnance
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Plate Base to Part No AMG 72155 DS CAT No 1015 001557[63]()
Specification : Plate Base to Part No. AMG 72155 (DS CAT No. 1015-001557) Drgs Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/ANNEXURE/003 For Assembly of 81MM Mortar Ordnance
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PAD TO 6201070149[62]()
Specification : PAD TO DRG. NO.188.70.001-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ADOPTER LUBRICATING NIPPLE TO DRG. NO. 4730-006761[90]()
Specification : ADOPTER LUBRICATING NIPPLE TO DRG. NO. 4730-006761
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953[90]()
Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 5060095 5060095 Y[90]()
Specification : BUSH TO DRG NO 5060095 5060095 Y
C
Nonestab
2) BUSH BOF 6164802[90]()
Specification : BUSH BOF 6164802
C
Nonestab
3) BUSH BOF 6104225 Y[90]()
Specification : BUSH BOF 6104225 Y
C
Nonestab
4) BUSH TO PART NO BOF 6115890[90]()
Specification : BUSH TO PART NO BOF 6115890
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPRING SAFETY SEAR TO DS CAT NO 1005 001698 TO DA NO 003 16 DATED 23 02 2016 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1282[70]()
Specification : AS PER DS CAT NO 1005-001698 TO DA NO 003/16 DATED: 23.02.2016 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1282)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COMPLETE MAGAZINE ASSEMBLY TO DRG NO 29 P 0411STAR CONSISTING OF CASE MAGAZINE SUB ASSEMBLY 29 P 0460 SPRING PLOTFORM AND RETAINER SUB ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
R
Nonestab
3) BRACKET FORESIGHT CASTING DRG NO 6P11 1 6 DRG NO 62 C 1006 250 H3[70]()
Specification : As per drawing of BRACKET FORESIGHT CASTING DRG NO 6P11 1 6 DRG NO 62 C 1006 250 H3
R
Nonestab
4) CATCH REGULATOR COMPONENT DRG NO 6P11 1 2[70]()
Specification : AS PER DRAWING OF CATCH REGULATOR COMPONENT DRG NO 6P11 1 2 DRG NO 62 C 1102 200 C3
C
Nonestab
5) PLATE BACK 6 P 11 2 9 DRG NO 62 C 2209 200 H2[70]()
Specification : AS PER DRAWINGS OF PLATE BACK 6 P 11 2 9 DRG NO 62 C 2209 200 H2
C
Nonestab
6) CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2[70]()
Specification : AS PER DRAWING OF CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2
C
Nonestab
7) HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3[70]()
Specification : AS PER DRAWING OF HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3
C
Nonestab
8) HOUSING BUFFER COMPONENT DRG NO 6P 11 4 11 DRG NO 62 C 4111 200 D3[70]()
Specification : AS PER DRAWING HOUSING BUFFER COMPONENT DRG NO 6P 11 4 11 DRG NO 62 C 4111 200 D3
C
Nonestab
9) PAWL BELT HOLDING CASTING DRG 6P 11 5 13 DRG NO 62 C 5013 250 H3[70]()
Specification : AS PER DRAWING PAWL BELT HOLDING CASTING DRG 6P 11 5 13 DRG NO 62 C 5013 250 H3
R
Nonestab
10) BRACKET HOLDING FRONT COVER CASTING DRG 6P 11 6 19 DRG NO 62 C 6019 250 I3[70]()
Specification : AS PER DRAWING BRACKET HOLDING FRONT COVER CASTING DRG 6P 11 6 19 DRG NO 62 C 6019 250 I3
R
Nonestab
11) BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3[70]()
Specification : AS PER DRAWING BLOCK GUIDE LEVER FEED CASTIGN DRG 6P 11 6 22 DRG NO 62 C 6022 250 I3
1) MACHINING OF 250 KGS BOMB BODY AS PER DRAWING NO ARDE 9501 01[10]()
Specification : MACHINING OF 250 KGS.BOMB BODY AS PER DRAWING NO.ARDE 9501-0 1.OTHER TERM & CONDITIONS AS PER ANNEXURE"A" ENCLOSED
C
Nonestab
2) MACHINING AND LEAK PROOF TEST OF HAND GRENADE EMPTY BODIES AS PER DRG NO ITW 63[32]()
Specification : MACHINING AND LEAK PROOF TEST OF HAND GRENADE EMPTY BODIES AS PER DRG NO. ITW-63.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) TRAY to part no.2A26-02-133()
Specification : Tray to part no. 2A26-02-133
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) NIV GROMMET 8MM WITH WASHER STAINLESS STEEL[2110008013]()
Specification : DRAWING NO. CQA(GS)/US/561
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) ALL TYPES OF GROMMET[21]()
Specification : AS PER SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) RIP CORD SMALL[2110005004]()
Specification : DRAWING NO. ADRDE/282(b)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) A4/5340-000461 GROMMET AND WASHER 16 MM PTR-R[2111992501]()
Specification : DRAWING NO. : IND/GS/1818(a).
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) COIL SPRING (FOR TAIL UNIT)[2101069002]()
Specification : SPECN NO.ADRDE/1159-A-1/SA-8-5
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) GROMMET WITH WASHER 8 MM[2110062008]()
Specification : DRAWING NO.ADRDE/80(f)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) RIP CORD LARGE[2110027005]()
Specification : PROV DRAWING NO.ADRDE/115(f).
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SHACKLE WITH PULLEY BP MIRAGE[2110060023]()
Specification : ADRDE/302(d)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) PULLEY RTU[2110026012]()
Specification : DRG.NO. ADRDE/ 1041-A-2/SA-1(c)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SPRING EJCETOR[2110075024]()
Specification : SPCN.NO.ADRDE/1197-A3/(SA-2)(a)
R
Nonestab
2) D RING for PP JAGUAR[2110075007]()
Specification : DRG.NO.ADRDE/1337
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) GROMMET WITH WASHER 18 MM DIA[2110065015]()
Specification : ADRDE/2004/03 Except that : Stainless steel as per specn. no IS: 6911-1992 X04Cr18Ni10Ti in softened condition.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) BUCKLE WAIST ADJUSTABLE ADOPTER SLIDING BAR TYPE[2102064015]()
Specification : SPECN.NO.IND/GS/1802
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) RIP CORD LARGE ADRDE 282 d[2110005015]()
Specification : ADRDE/282(d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) GROMMET WITH WASHER 11 MM FOR BP MIRAGE[2110060024]()
Specification : DRAWING NO ADRDE/306(b)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) BUCKLE STEEL 38 MM BLACK EPOXI PAINTED[2110039014]()
Specification : PLATE NO. 8 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b)
R
Nonestab
2) BUCKLE STEEL 48 MM BLACK EPOXI PAINTED[2110039013]()
Specification : SPCNS: PLATE-7 OF DRG. ATTACHED WITH SPECN. NO. DMSRDE/T&GS/93/410(b)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302037 FORGING FOR HUB CARRIER TO DRG NO P155 HRG 1001 3 FOR PROJECT DHANUSH[71]()
Specification : AS PER DRG. NO: P155-HRG-1001-3
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) 7110302036 FORGING FOR GEAR RING CARRIER TO DRG NO P155 HRG 3014 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR GEAR RING CARRIER TO DRG. NO: P155-HRG-3014-3 FOR PROJECT DHANUSH.
R
Nonestab
2) 7110302032 FORGING FOR GEAR RING TO DRG NO P155 HRG 3011 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR GEAR RING TO DRG. NO: P155-HRG-3011-3 FOR PROJECT DHANUSH
R
Nonestab
3) 7110302033 FORGING FOR SUN GEAR TO DRG NO P155 HRG 3001 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR SUN GEAR TO DRG. NO: P155-HRG-3001-3 FOR PROJECT DHANUSH.
R
Nonestab
4) 7110302034 FORGING FOR PLANETARY PINION TO DRG NO P155 HRG 3002 3 FOR PROJECT DHANUSH[71]()
Specification : FORGING FOR PLANETARY PINION TO DRG. NO: P155-HRG-3002-3 FOR PROJECT DHANUSH.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER SPRING TBRL LF NO 9911358297
Description : SHUTTER SPRING TBRL LF NO 9911358297()
Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ROD FORGING TO 3901021012[39]()
Specification : 187.21.032/F
R
Nonestab
2) ROD TO 3906109061[39]()
Specification : 172.11.115/F
R
Nonestab
3) TIE ROD TO 3906210067[39]()
Specification : 172.27.066/F
R
Nonestab
4) ROD TO 3906417046[39]()
Specification : 172.61.044/F
R
Nonestab
5) ROD TO 3906419063[39]()
Specification : 172.63.006/F
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Disc Wheel X3801314[90]()
Specification : DISC WHEEL 9.0 X 20 STLN BS-3 DISC WHEEL 9.0 X 20 STLN,MK-IV,BS-III VEHICLE.PT.NO.X3801314 HASE.4
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Spring Washer M 12 B[90]()
Specification : SPRING WASHER M-12 IS;3063 SPRING WASHER M-12 TYPE 'B' IS : 3063 ZINC PLATED / GALVD & YELLOW PASSIVATED
C
Nonestab
2) Load Body Complete Drg No B6510604 C 1 for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) JERRICAN CARRIER for LPTA WB[90]()
Specification : DRG NO-CJ33827000005
S
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HOSE ASSY BODY LIFT PUMP[90]()
Specification : HOSE ASSY BODY LIFT PUMP
C
Nonestab
2) SPRING LOAD BODY FRT[90]()
Specification : SPRING LOAD BODY FRT.
C
Nonestab
3) Load Body Accessories[90]()
Specification : As per specification / drg.
C
Nonestab
4) VEHICLE IDENTIFICATION PLATE[90]()
Specification : VEHICLE IDENTIFICATION PLATE
C
Nonestab
5) PLATE[90]()
Specification : PLATE (BKT ON CROSS FT. MEMBER PLATE)
C
Nonestab
6) T BOLT CLAMP[90]()
Specification : T BOLT CLAMP (79DIA), PART NO. X-3900310
C
Nonestab
7) SHACKLE PIN[90]()
Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3
C
Nonestab
8) STUD[90]()
Specification : STUD M 14X 1.5, PART NO. X3711915 A
C
Nonestab
9) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
10) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
11) Adaptor F0122615[90]()
Specification : ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD REAR LEFT HAND TO 6206803050[62]()
Specification : SHIELD REAR LEFT HAND TO DRG NO. 172.04.198CB
C
Nonestab
2) SHIELD REAR RIGHT HAND TO 6206803052[62]()
Specification : SHIELD REAR RIGHT HAND TO DRG NO.172.04.200CBCB
C
Nonestab
3) SHIELD HINGED FRONT RIGHT HAND TO 6206803351[62]()
Specification : SHIELD HINGED FRONT RIGHT HAND TO DRG NO. 184.04.028CB-1CB
C
Nonestab
4) SHIELD HINGED FRONT LEFT HAND TO 6206803352[62]()
Specification : SHIELD HINGED FRONT LEFT HAND TO DRG NO. 184.04.029CB-1CB
C
Nonestab
5) SHUTTERS CONTROL LINKAGE HANDLE ASSY TO 6206102061[62]()
Specification : SHUTTERS CONTROL LINKAGE HANDLE ASSY TO DRG NO. 175.02.025CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CAP SPRING RETURN OPENER TO DRG. NO. CTM-0126 IN F/C[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Cap Spring Return to Drg. No. CTM-0125/1 TO 6 IN F/C[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) PIN FIRING FRONT (PB-22) TO DRG. NO-CTM-0029A IN FINISHED CONDITION[70]()
Specification : AS PER REQUIRED DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION TO FORGING TO DRG NO 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR CHAMBER GAS A1004[00]()
Specification : AS PER DRG TO CONVERSION TO FORGING TO DRG.NO.: 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT
REQD. FOR CHAMBER GAS A1004
C
Estab
2) CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42 03 004 C3004[00]()
Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR
PISTON TO DRG NO 2A42.03.004 (C3004)
C
Estab
3) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Estab
4) BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Estab
5) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Estab
6) IC FOR 20MM MUZZLE BRAKE[70]()
Specification : AS PER OFB REQUIREMENTS
R
Estab
7) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Estab
8) MSL LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Estab
9) ROD HANDLE[70]()
Specification : ROD HANDLE TO DRG. NO. 30P 2021 WITH FIRM'S MATERIAL IN FULLY FINISHED REQUIRED FOR 40MM MGL
C
Estab
10) EJECTOR TO DRG NO 44P 03006 ST 2 REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Estab
11) STEM DRG TO 44P 30012 ST REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Estab
12) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Estab
13) BARREL LATCH TO DRG NO 44P 04005[70]()
Specification : AS PER OFB REQUIREMENT
C
Estab
14) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
C
Estab
15) CHEEK PIECE PLUNGER[70]()
Specification : AS PER REQ
C
Estab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Assy Spare wheel lifting Unit[90]()
Specification : ASSY SPARE WHEEL LIFTING UNIT - COMPLETE INCLUDING ASSEMBLY HANDLE AND ROPE TO DRG. NO. CONSISTING OF DRGS. AS PER LIST ATTACHED.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) SCREW FOR RING NUT IS 2269 2006 L F NO 6220900800[62]()
Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED]
C
Nonestab
2) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Nonestab
3) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]()
Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED
C
Nonestab
4) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]()
Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED
C
Nonestab
5) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Nonestab
6) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]()
Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED]
C
Nonestab
2) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
3) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]()
4) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
5) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED]
C
Nonestab
6) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
7) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS.
C
Nonestab
8) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
9) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].
C
Nonestab
10) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
11) RING NUT MCD 450 KG L F NO 6230900904[62]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
12) ROLLING RING 450 KG L F NO 6231100104[62]()
Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.-ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, MAKE OF ITEM NOS.4,5,6 AND 7 IS LPS/UNBRAKO/GKW.
C
Nonestab
13) O RING I D 38 0 250 KG L F NO 6241101204[62]()
Specification : O RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB.
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) ROLLING RING ASSY 250 KG L F NO 6241100114[62]()
Specification : ROLLING RING ASSY. TO DRG. No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED]
C
Nonestab
2) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
3) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHAFT PINION TO 3906208037[39]()
Specification : 172.25.065/F
R
Nonestab
2) SHAFT GEAR RH AND LH TO 3906401031[39]()
Specification : 172.40.019-1/F
R
Nonestab
3) SHAFT TO 3909849374[39]()
Specification : PV572.0711.3074/F
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) AUTO SEAR TO DRG NO MIM K 2067 00 TAR[70]()
Specification : AUTO SEAR TO DRG NO MIM K 2067 00 TAR
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Estab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
4) SPRING EXTRACTOR TO DRG No 29P 0019STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0019* required for 0.315" Sporting Rifle
Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle
C
Nonestab
6) SCREW EXTRACTOR 29P 0021STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER Drg. No. 29P 0021* required for 0.315" Sporting Rifle
C
Nonestab
7) COMPLETE MAGAZINE ASSEMBLY TO DRG NO 29 P 0411STAR CONSISTING OF CASE MAGAZINE SUB ASSEMBLY 29 P 0460 SPRING PLOTFORM AND RETAINER SUB ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG
C
Estab
8) CYLINDER TO DRG NO 44P 02001 STAR[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
9) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
10) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
11) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
12) TRANSIT CASE TO DRG NO 30041 ST 2 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
E
Nonestab
13) SAFETY PLATE TO DRG NO 44P 06016 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
14) CHEEK PIECE PLUNGER[70]()
Specification : AS PER REQ
C
Nonestab
15) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
16) CARRYING HANDLE ASSY TO DRG NO 11000 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SPRING HANGER BRACKET (FRONT - REAR SUSPENSION)[90]()
1) 6141800106 WASHER SPRING ITX-240 MINE AP 1B DR[61]()
Specification : WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1749009905 RIVET ITX 239 MINE AP 1B DIR[17]()
Specification : RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330600190 RING SEALING DRG.3-016919 DET-52[63]()
Specification : SPECN.JSS 4720-02
R
Nonestab
2) 6273200026 OBTURATOR TO DRG NO CQA 155 1140[62]()
Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6410900330 BASE TO DRG.4-025998 081 125MM HEAT[64]()
Specification : SPECN. NO. JSS 9330-05
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]()
Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6043000210 BOMB BODY 81MM MOR C EMP ITV 9A[60]()
Specification : CQA(A) 2305(M)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM[63]()
Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6332000122 PAD SHOULDER ISV 106 SA[63]()
Specification : PAD SHOULDER (ISV 106 SA) FOR AMMUNITION CARRIER 10C AS PERSPECIFICATION NO. CQA (A) 2804 (M).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113906 CASING 2 HALVE MOD FOR 120MM ARJUN[65]()
Specification : CASING IN TWO HALVES (MODIFIED) FOR 120MM ARJUN
C
Nonestab
2) 2029992283 RING SECURING ISV 1122[20]()
Specification : SECURING RING,DRG.PART NO.ISV-1122, DC 35975-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6504300006 RETAINER[65]()
Specification : RETAINER TO DRG. NO. 9102 00 01 00 01 003 00TB FOR 30 MM GRENADE RUDRA AGS-17
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030116 MS PLATE SIZE 1200 MM[01]()
Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) DETENT ZEROING SCREW D S CAT NO 1005 001599 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1255 DC NO DA No 003 16 Dt 23 02 16 TO BE FOLLOWED[70]()
Specification : AS PER D.S. CAT. NO. 1005-001599 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1255) DC NO. DA No.003/16 Dt.23.02.16 TO BE FOLLOWED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
2) PULL THROUGH 1A NYLON AS PER DS CAT NO 1005 001760 FOR DC NO 22520 SA DATED 2 point 5 point 94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7point 62mm 1A1[70]()
Specification : AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1
E
Nonestab
3) SUPPLY OF STUD AS PER DRG NO K 1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
4) MANUFACTURING OF REAR CROSS[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS OF MGL BLANKS TO DRAWING TEND NO. 2654 WITH FIRM'S MATERIAL
C
Nonestab
5) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
6) 20MM MAGAZINE ASSY TO DRG NO 10000 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
7) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HINGES FOR REAR DOOR & BONNET[90]()
Specification : HINGES FOR REAR DOOR & BONNET ASSY. OF MPV 6 SET/VEH DRG. NO.HULL/MPV/112/B
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) CASTING FOR COMMANDER RING[90]()
Specification : CASTING FOR COMMANDER RING
C
Nonestab
2) HANDLE ASSY 675 50 CB301[90]()
Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SEAT BASE ASSY FRONT LHS[90]()
Specification : SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) 9010398122000 BUMPER ASSY AND DETAILS FOR UPGRADED MPV 4X4[90]()
Specification : DRG. 2725-57-31
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) RINGH WELDING AND MACHINING TO PART NO BOF 4020632[90]()
Specification : RINGH WELDING AND MACHINING TO PART NO BOF 4020632
C
Nonestab
2) BRACKET WELDING DRG ASSY DRG NO BOF 5078034[90]()
Specification : BRACKET WELDING DRG ASSY DRG NO BOF 5078034
C
Nonestab
3) BACKREST ASSY OPERATOR PLATEFORM PART NO IAN 145 SA[90]()
Specification : BACKREST ASSY OPERATOR PLATEFORM PART NO IAN 145 SA
C
Nonestab
4) SEAT OPERATOR LEFT TO DRG NO IAN 67 A[90]()
Specification : SEAT OPERATOR LEFT TO DRG NO IAN 67 A
C
Nonestab
5) SEAT OPERATOR RIGHT TO DRG NO IAN 68 A[90]()
Specification : SEAT OPERATOR RIGHT TO DRG NO IAN 68 A
C
Estab
6) BRAKE INSTALLATION ASSY TO DRG NO 3017505 3029310[90]()
7) FIRING GEAR FOOT REST WELDING DRG NO 4027009[90]()
Specification : FIRING GEAR FOOT REST WELDING DRG NO 4027009
C
Nonestab
8) PEDAL LEVER TO DRG NO 5001260[90]()
Specification : PEDAL LEVER TO DRG NO 5001260
C
Nonestab
9) PEDAL WELDING AND MACHINING 5045062[90]()
Specification : PEDAL WELDING AND MACHINING 5045062
C
Nonestab
10) COVER WELDING AND MACHINING TO DRG NO 3019272[90]()
Specification : COVER WELDING AND MACHINING TO DRG NO 3019272
C
Nonestab
11) LEVER WELDING AND MACHINING DRG NO 6098805[90]()
Specification : LEVER WELDING AND MACHINING DRG NO 6098805
C
Nonestab
12) MACHINING OF RACK EXTERNAL INTER[90]()
Specification : MACHINING OF RACK EXTERNAL TO DRG.NO.3013787 & RACK INTERNAL
TO DRG.NO.3031977. (FORGED RING WILL BE SUPPLIED BY GCF AFTER
HEAT TREATMENT AT GCF)
C
Nonestab
13) PLATE TOP WELDING MACHINING TO DRG NO 3021409[90]()
Specification : PLATE TOP WELDING & MACHINING TO DRG.NO.3021409
C
Nonestab
14) 9069112853 CAGE ASSY TO DRG NO 4020608[90]()
Specification : 9069112853 CAGE ASSY TO DRG NO 4020608
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SLIDER PT.1 TO DRG. NO. 1015-000406[90]()
Specification : SLIDER PT.1 TO DRG. NO. 1015-000406
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) DIP STICK LIQUID QUANTITY TO DRG. NO. 6680-000480[90]()
Specification : DIP STICK LIQUID QUANTITY TO DRG. NO. 6680-000480
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) CATCH LOCKING TO PT NO BOF 6125531[90]()
Specification : CATCH LOCKING TO PT.NO.BOF-6125531
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SEATING SPRING TO PART NO 6118954[90]()
Specification : SEATING SPRING TO PART NO.6118954
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) VALVE SEATING TO DRG NO BOF 6115657[90]()
Specification : VALVE SEATING TO DRG NO BOF-6115657
1) SLIDING DISC PART NO 6413413 LF 9911358440[99]()
Specification : SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627
R
Nonestab
2) BOOSTER HOUSING PART NO 5229169 LF 9911358424[99]()
Specification : BOOSTER HOUSING PART NO.5229169 TO OEM DRG.NO.304084449/ TRD.DRG.NO. 3.2.2653
R
Nonestab
3) SLIDING DISC PART NO 6416336 LF 9911358402[99]()
Specification : SLIDING DISC PART NO.6416336 TO OEM DRG.NO.304101511/ TRD.DRG.NO 1.2.2427
R
Nonestab
4) BOOSTER CUP PART NO 4102996 LF 9911358399[99]()
Specification : BOOSTER CUP PART NO.4102996 TO OEM DRG.NO.304075972/ TRD.DRG.NO. 3.2.2552
R
Nonestab
5) COVER PART NO 6429713 LF 9911358447[99]()
Specification : COVER PART NO.6429713 TO OEM DRG.NO.304061235/TRD.DRG.NO. 1.2.2758
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOWL FOR 76 62 MM SHELL LF 9911357252[99]()
Specification : BOWL FOR SHELL 76/62 SRGM AMMN. TO TO DRG. NO.TRD-1-2-1984. OR NASK 1108/.4/2/(P)
R
Nonestab
2) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519[99]()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
C
Nonestab
3) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
4) SHUTTER PLATE TBRL LF NO 9911358300[99]()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLAMP OP ASSEMBLE EXTRACTOR TO DRG NO F 3871 BREECH BLOCK ASSEMBLY CES ITEMS[70]()
Specification : AS PER DRG. NO. F-3871
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
2) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL
C
Nonestab
3) FIXED BUTT ASSY AS PER DRG No K3000 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 3000 WITH FIRM'S MATERIAL
C
Nonestab
4) SCREW LOCKING HINGE PIN[70]()
Specification : AS PER D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.
C
Nonestab
5) SCREW RETAINING LOCKING CATCH LEVER DS CAT NO 5305 005005 WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1222 DC NO 24223 SA DT 041298[70]()
Specification : AS PER DS.CAT.NO.5305-005005 (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1222) DC NO- 24223-SA DT. 04.12.98
R
Nonestab
6) BRUSH CLEANING RIFLE MARK 1 L DS CAT NO 1005 001120 DC NO 26087 SA DT 11 07 05 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
E
Nonestab
7) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Nonestab
8) Forging for pre machining for Rear Cross[70]()
Specification : Forging for pre machining for Rear Cross
C
Nonestab
9) LOCK BARREL COMPONENT DRG NO 6 P 11 2 32 DRG NO 62 C 2032 200 E3[70]()
Specification : AS PER DRAWINGS OF LOCK BARREL COMPONENT DRG NO 6 P 11 2 32 DRG NO 62 C 2032 200 E3
R
Nonestab
10) Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA[70]()
Specification : Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
C
Nonestab
11) Base left cylinder gas to DSCAT NO 1005 007317 A2628[70]()
Specification : Base left cylinder gas to DSCAT NO 1005 007317 A2628 DC NO 27095 SA for DC Latest to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998062
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) GUARD RIGHT WELDING TO DRG NO BOF 5049700[90]()
Specification : GUARD RIGHT WELDING TO DRG. NO. BOF - 5049700
C
Nonestab
2) TRAIL LOCKING BAR LEFT AND RIGHT TO PART NO 1147189 AS PER ANNEXURE NO DHANUSH 1147189 2017[90]()
Specification : TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017.
C
Nonestab
3) FABRICATION AND MACHININGH OF BRACKET[90]()
Specification : FABRICATION AND MACHININGH OF BRACKET
C
Nonestab
4) RINGH WELDING AND MACHINING BOF 4026964[90]()
Specification : RINGH WELDING AND MACHINING BOF 4026964
C
Nonestab
5) RINGH WELDING AND MACHINING TO PART NO BOF 4020632[90]()
Specification : RINGH WELDING AND MACHINING TO PART NO BOF 4020632
C
Nonestab
6) BRACKET WELDING DRG ASSY DRG NO BOF 5078034[90]()
Specification : BRACKET WELDING DRG ASSY DRG NO BOF 5078034
C
Nonestab
7) 9069112779 AXLE RAISING GEAR FRONT ASY TO DRG NO 3023988 IAN 5MA[90]()
Specification : 9069112780 AXLE RAISING GEAR REAR ASSY TO DRG NO IAN 6 MA
C
Nonestab
8) SEAT OPERATOR LEFT TO DRG NO IAN 67 A[90]()
Specification : SEAT OPERATOR LEFT TO DRG NO IAN 67 A
C
Nonestab
9) SEAT OPERATOR RIGHT TO DRG NO IAN 68 A[90]()
Specification : SEAT OPERATOR RIGHT TO DRG NO IAN 68 A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) COLLER PICKET PLUNGER TO PART 6103125[90]()
Specification : COLLER PICKET PLUNGER TO PART 6103125
C
Nonestab
2) HEAD PLUNGER TO PART NO 6103051[90]()
Specification : HEAD PLUNGER TO PART NO 6103051
C
Nonestab
3) RETAINER TO PART NO 6108892[90]()
Specification : RETAINER TO PART NO 6108892
C
Nonestab
4) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
5) 9069018285 SPRING TO DRG NO M2 BOF 5050019 2[90]()
Specification : SPRING TO DRG NO M2 BOF 5050019 2
C
Nonestab
6) 9069018284 SPRING TO DRG CAT PT NO M2 BOF 5050019[90]()
Specification : SPRING TO DRG CAT PT NO M2 BOF 5050019
C
Nonestab
7) 9069018286 SPRING TO DRG NO BOF 5050020[90]()
Specification : SPRING TO DRG NO BOF 5050020
C
Nonestab
8) 9069018287 SPRING TO DRG NO M2 BOF 5050020 2[90]()
Specification : SPRING TO DRG NO M2 BOF 5050020 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PEGS NIGHT LINE MG MK I[70]()
Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SPRING LOAD BODY FRT[90]()
Specification : SPRING LOAD BODY FRT.
C
Nonestab
2) SPARE WHEEL CARRIER ASSY WITHOUT REDUCTION GEAR BOX[90]()
Specification : SPARE WHEEL CARRIER ASSY. W/O SPARE WHEEL CARRIER ASSY. PART NO. A0909100 WITHOUT REDUCTION GEAR BOX TO (PART NO. X3917700 CONSISTING OF 60 ITEM AS PER LIST ENCLOSED. N/A
C
Nonestab
3) Load Body Complete Drg No B6510604 C 1 for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
4) HYDRAULIC JACK[90]()
Specification : HYDRAULIC JACK DRG./PART NO.X-7451300-V3A-1-01-CV3NO-38
C
Nonestab
5) Sleeve drg no X 1201250 Hase for Stallion vehicle[90]()
Specification : As per specification / drg.
C
Nonestab
6) BRACKET AGB[90]()
Specification : BRACKET -AGB (102-04), PART NO. X0472614-V1
C
Nonestab
7) BRACKET BLACK OUT HEAD LAMP[90]()
Specification : BRACKET BLACK OUT HEAD LAMP, PART NO. X-7153914-#
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
14) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
15) BODY MTG 4TH RH LH[90]()
Specification : BODY MTG 4TH RH/LH DRG./PART NO.X-7135410 HASE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10[71]()
Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HINGE TO 6201004080[62]()
Specification : 184.04.005-1
C
Nonestab
2) THIRD UPPER RIGHT HAND STRAP ASSY TO 6201004017[62]()
Specification : 184.04.013CBCB
C
Nonestab
3) FOURTH RIGHT HAND STRAP ASSY TO 6201004018[62]()
Specification : 184.04.014CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Estab
2) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Estab
3) Manufacturing and supply of barrel blank after honing stage[70]()
Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel
C
Nonestab
4) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 ST 2[70]()
Specification : AS PER REQ
C
Estab
5) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()
Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030
C
Nonestab
6) MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
7) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
8) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]()
Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR
C
Nonestab
9) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
10) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
11) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
12) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()
Specification : AS PER OFT REQUIREMENT
R
Nonestab
13) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
14) Guard Hand Left Right Assembly Polymers[11]()
Specification : Guard Hand Left Right Assembly Polymers
Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
C
Nonestab
3) BIPOD ASSY OF LMG BELT FED[70]()
Specification : BIPOD ASSY OF LMG 7.62MM BELT FED as per drawing No.
1804 01 08 00 00 000 00DA
C
Nonestab
4) CYLINDER GAS FOR LMG BELT FED[70]()
Specification : CYLINDER GAS (EXPTL) DRG.NO. ARDE/SK/108/010 FOR LMG 7.62MM BELT FED
C
Nonestab
5) PIN TRIGGER GUARD PLUNGER FOR REVOLVER SIDE SWING[70]()
Specification : PIN TRIGGER GUARD PLUNGER FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/4 SW.
C
Nonestab
6) PIN HAMMER DOG FOR REVOLVER SIDE SWING[70]()
Specification : PIN HAMMER DOG FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/5 SW.
C
Nonestab
7) Pin Recoil Plate For Revolver Side Swing[70]()
Specification : Pin Recoil Plate For Revolver 0.32 Side Swing DRG. NO. RV-03/7 SW.
C
Nonestab
8) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front[70]()
Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish
C
Nonestab
9) Body Finished Through IC for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
10) Grip Sub Assy for Revolver Side Swing[70]()
Specification : Grip Sub Assy for Revolver 0.32 Side Swing Drg. No. RV-03/15,16,17 SW.
C
Nonestab
11) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA[70]()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
C
Nonestab
12) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
13) Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA[70]()
Specification : Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PIPE MAIN PRESSURE LEFT BREATH T C IAN 198 SA[90]()
Specification : PIPE MAIN PRESSURE LEFT BREATH T C IAN 198 SA
C
Nonestab
2) PIPE COOLING CROSS COUPLING 175 SA[90]()
Specification : PIPE COOLING CROSS COUPLING 175 SA
C
Nonestab
3) PIPE COOLING RELIEF VALVE IAN 176 SA[90]()
Specification : PIPE COOLING RELIEF VALVE IAN 176 SA
C
Nonestab
4) PIPE REGULATING VALVE H PUMP ASSY[90]()
Specification : PIPE REGULATING VALVE H PUMP ASSY
C
Nonestab
5) PIPE REGU VALVE OIL TANK IAN 92 SA[90]()
Specification : PIPE REGU VALVE OIL TANK IAN 92 SA
C
Nonestab
6) 9081001771 LAYER SEAT WITH MTG PLATFORM ASSEMBLY TO PT NO 129837[90]()
Specification : LAYER SEAT WITH MTG.PLATFORM ASSEMBLY TO PT.NO.1129837.
C
Nonestab
7) SPANNER 35A TO DRG NO 5120 003114[90]()
Specification : SPANNER 35A TO DRG. NO.5120-003114
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) THREADED BUSH TO DRG. NO. NAI(J)/501/21 IN FINISHED CONDITION[63]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TOP PLUG TO DRG. NO. NAI(J) 501/2 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
2) PUSH PIN & LOCK PIN TO DRG. NO. CTM-0111/1 TO CTM-0111/6[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]()
Specification : AS PER DRAWING
C
Nonestab
2) SLIDE TO DRG NO CTM 166[70]()
Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG[01]()
Specification : AS PER DRG.
C
Nonestab
2) PIN CYLINDER CENTER LOCK FOR REVOLVER SIDE SWING[70]()
Specification : PIN CYLINDER CENTER LOCK FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-04/2 SW.
C
Nonestab
3) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front[70]()
Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish
C
Nonestab
4) CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA[70]()
5) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FORJVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-04-02-14-000-00DA
C
Nonestab
6) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*
C
Estab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BIPOD ASSEMBLY OR GUN MOUNT COMPLETE TO DRG F1303 028700 DOC NO 304059968 IN FINISHED CONDITION DC NO 19568 W DT 30 01 17[71]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 9 A 621 05 015[72]()
Specification : BUSH TO DRG NO 9-A-621.05.015
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LINK TO DRG NO 1015 000341[90]()
Specification : LINK TO DRG. NO. 1015- 000341
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LOADING TRAY RESERVE PT. NO. 1154765[90]()
Specification : AS PER TE NO. 160306FHPO
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081001242 PROTECTIVE GEAR PART NO 1156272D[90]()
Specification : PROTECTIVE GEAR AS PER THE DESCRIPTION AND BILL OF MATERIAL
(enclosed) PART NO 1156272D.
C
Nonestab
2) 9073100031 PAD ELEVATING CYLINDER FORGING TO DRG NO GCF MN 5417 A[90]()
Specification : PAD ELEVATING CYLINDER (FORGING) TO DRG.NO.GCF MN-5417 (A) (REF:DRG.NO.V548-0136-1027)FORGING SHOULD BE ULTRASONICALLY TESTED AS PER SPECN:IS:8791-1978 CLASS-A FOR CREAK DETECTION & FREE FROM INTERN AL & EXTERNAL DEFECTS.
PAD ELEVATIN
C
Nonestab
3) 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A[90]()
Specification : 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A
C
Nonestab
4) 9073100022 STEEL CASTING FOR CAP TO DRG NO GCF MN 5398 B[90]()
Specification : 9073100022 STEEL CASTING FOR CAP TO DRG NO GCF MN 5398 B
C
Nonestab
5) 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C[90]()
Specification : 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C
C
Nonestab
6) 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B[90]()
Specification : 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) RAMMERTO ART NO 1156267 EXCLUDING HYDRAULIC CYLINDER RAMMER UNIT[90]()
Specification : AS PER TENDER DOCUMENT
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081577 SPANNER WRENCH TO DRG NO 5140 000205[90]()
Specification : 9080081577 SPANNER WRENCH TO DRG NO 5140 000205
C
Nonestab
2) 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119[90]()
Specification : 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119
R
Nonestab
3) 9080081479 SPANNER 44 A TO DRG NO 5120 003116[90]()
Specification : 9080081479 SPANNER 44 A TO DRG NO 5120 003116
R
Nonestab
4) PLUNGER LOCKING IFL 804 SA TO DRG NO 1015 000724[90]()
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Container Cartridge As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Vane As Per Drg. (Part) No. ITV 46 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. ITV 46 For Tail Unit 2A
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Vane As Per Drg. (Part) No. ITV 46 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. ITV 46 For Tail Unit 2A
C
Nonestab
2) Loading System[62]()
Specification : For more details (Annexures and Drawings) regarding tender visit www.ofbeproc.gov.in
C
Estab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Estab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Estab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Estab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Estab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Estab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Estab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Estab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Estab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Vane As Per Drg. (Part) No. ITV 46 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. ITV 46 For Tail Unit 2A
C
Nonestab
2) Loading System[62]()
Specification : For more details (Annexures and Drawings) regarding tender visit www.ofbeproc.gov.in
C
Nonestab
3) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
E
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Container Cartridge As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A
C
Nonestab
2) Wire Assly[65]()
Specification : Wire Assy to part no. 2A26-CB02-24CB and DS CAT No 1015-00278 for T-72 Gun component
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Vane As Per Drg. (Part) No. ITV 46 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. ITV 46 For Tail Unit 2A
C
Nonestab
2) Loading System[62]()
Specification : For more details (Annexures and Drawings) regarding tender visit www.ofbeproc.gov.in
C
Nonestab
3) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
4) Lanyard Short to Drg No 161 1292[63]()
Specification : As per Drg. No. 161-1292
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Container Cartridge As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A
C
Nonestab
2) Wire Assly[65]()
Specification : Wire Assy to part no. 2A26-CB02-24CB and DS CAT No 1015-00278 for T-72 Gun component
C
Nonestab
3) HOLDER AS PER DRG NO D 4078830[63]()
Specification : HOLDER AS PER DRG NO D-4078830 REV B FOR DHANUSH ORDNANCE
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
10) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
11) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
12) Finish Machining of House D 2025296[63]()
Specification : Finish Machining of House D-2025296 Rev 'A'
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
10) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
10) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
11) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Vane As Per Drg. (Part) No. ITV 46 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. ITV 46 For Tail Unit 2A
C
Nonestab
2) Loading System[62]()
Specification : For more details (Annexures and Drawings) regarding tender visit www.ofbeproc.gov.in
C
Nonestab
3) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
4) Lanyard Short to Drg No 161 1292[63]()
Specification : As per Drg. No. 161-1292
C
Nonestab
5) CASE TO DRG NO D 3053014 REV A FOR DHANUSH ORDNANCE[63]()
Specification : CASE TO DRG NO D 3053014 REV A FOR DHANUSH ORDNANCE
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
10) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
11) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
12) Finish Machining of House D 2025296[63]()
Specification : Finish Machining of House D-2025296
C
Nonestab
13) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
10) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
11) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
12) Finish Machining of House D 2025296[63]()
Specification : Finish Machining of House D-2025296
C
Nonestab
13) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
14) ARM TO DRG NO D 4081495[63]()
Specification : ARM TO DRG NO D 4081495 REVISION A FOR DHANUSH
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
10) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
11) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
12) Finish Machining of House D 2025296[63]()
Specification : Finish Machining of House D-2025296
C
Nonestab
13) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
14) ARM TO DRG NO D 4081495[63]()
Specification : ARM TO DRG NO D 4081495 REVISION A FOR DHANUSH
C
Nonestab
15) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
16) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
2) Base Arm[64]()
Specification : Base Arm to Part No. 176-8130
C
Nonestab
3) Crank[64]()
Specification : Crank to Part No. 161-690 to be manufactured from forging as per Drgt. No. 161-690 F
C
Nonestab
4) Rings extractor and 2 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
5) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
6) Zeroing tool muzzle brake and 3 more Items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
7) Cartridge Extractor and 2 more items[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
8) DOWEL REMOVAL AND 3 MORE ITEMS[63]()
Specification : All the tender related documents (Terms & Conditions and
Drawings ) can be downloaded from www.ofbeproc.gov.in
C
Nonestab
9) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
10) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
11) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
12) Finish Machining of House D 2025296[63]()
Specification : Finish Machining of House D-2025296
C
Nonestab
13) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
14) ARM TO DRG NO D 4081495[63]()
Specification : ARM TO DRG NO D 4081495 REVISION A FOR DHANUSH
C
Nonestab
15) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
16) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
C
Nonestab
17) Hand Rammer to part no 166 282[63]()
Specification : As per Part No. 166-282
C
Nonestab
18) Pressure Plate Fasten Fixture to Part No 166 617[63]()
Specification : As per Part No 166-617
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Container Cartridge As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A
C
Nonestab
2) Wire Assly[65]()
Specification : Wire Assy to part no. 2A26-CB02-24CB and DS CAT No 1015-00278 for T-72 Gun component
C
Nonestab
3) HOLDER AS PER DRG NO D 4078830[63]()
Specification : HOLDER AS PER DRG NO D-4078830 REV B FOR DHANUSH ORDNANCE
C
Nonestab
4) Arm as per drg no D 4077840 Rev A for Dhanush Ordnance[63]()
Specification :
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9073200003 CASTING FOR NECK TO DRG NO 2A46M 109 3[90]()
Specification : CASTING FOR NECK TO DRG.NO.2A46M.109-3.
C
Nonestab
2) 9073200005 CASTING FOR BRACKET TO DRG NO 2A46M 109 82[90]()
Specification : CASTING FOR BRACKET TO DRG.NO.2A46M.109-82
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) RING DUST EXCLUDER TO DRG NO 5067781[90]()
Specification : RING DUST EXCLUDER TO DRG.NO.5067781.
C
Nonestab
2) 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C[90]()
Specification : 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C
C
Nonestab
3) 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B[90]()
Specification : 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B
C
Nonestab
4) 9080081406 SPRING HELICAL EXTSN TO 5360 000268[90]()
Specification : 9080081406 SPRING HELICAL EXTSN.TO 5360-000268
C
Nonestab
5) 9081002749 EJECTOR PROJECTILE MODIFIED DRG NO GCF 50 39423[90]()
6) RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330 023797[90]()
Specification : RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
2) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
3) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()
Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL
C
Nonestab
4) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672
C
Nonestab
5) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()
Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670
C
Nonestab
6) FORGING BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG NO 6528254 FORGE[74]()
Specification : FORGING, BARREL EXTENSION FOR M2HB GUN OOW50BMG AS PER DRG. NO. 6528254-FORGE
C
Nonestab
7) Assembly Carrying Handle OOW50BMG as per drawing no 10208111 of M2HB GUN[74]()
Specification : Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN
C
Nonestab
8) STOP ASSEMBLY CARTRIDGE OOW50BMG as per drawing no 5577409 of M2HB GUN[74]()
Specification : STOP ASSEMBLY, CARTRIDGE, OOW50BMG as per drawing no.: 5577409 OF M2HB GUN
C
Nonestab
9) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
10) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
C
Nonestab
11) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
12) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
13) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
14) MANUFACTURING AND SUPPLY OF SET OF 11 TYPES OF SPRINGS OF TAR AS PER DRG No K2032 K2066 K2063 K1208 K1034 K2024 K4005 K4013 K1112 K2068 K2013[70]()
Specification : MANUFACTURING AND SUPPLY OF SET OF 11 TYPES OF SPRINGS OF TAR AS PER DRG No K2032 K2066 K2063 K1208 K1034 K2024 K4005 K4013 K1112 K2068 K2013
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SHAFT TO DRAWING NO 3054133[90]()
Specification : SHAFT TO DRAWING NO.3054133
R
Nonestab
2) 9081001242 PROTECTIVE GEAR PART NO 1156272D[90]()
Specification : PROTECTIVE GEAR AS PER THE DESCRIPTION AND BILL OF MATERIAL
(enclosed) PART NO 1156272D.
C
Nonestab
3) SHACKLE D 1A D6P TA 7208SA TO DRG NO 4030 000371 ICM 242A[90]()
Specification : SHACKLE "D"1A(D6P-TA-7208SA) TO DRG.NO.4030-000371/ICM-242A
C
Nonestab
4) 9081005873 MODIFIED BARREL CLEANING APPARATUS 155 MM GUN SYSTEM TO DRG NO GCF 50 41091[90]()
Specification : MODIFIED BARREL CLEANING APPARATUS (155 MM GUN SYSTEM) TO DRG NO.GCF/50/41091.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112637 PISTON BOF 5065970[90]()
Specification : PISTON BOF 5065970
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LOADING TRAY RESERVE PT. NO. 1154765[90]()
Specification : AS PER TE NO. 160306FHPO
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) TRAVERSING NUT TO DRG 5310 001835[90]()
Specification : TRAVERSING NUT TO DRG. 5310 001835
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF TRACK GUIDE[61]()
Specification : AS PER OFM APECIFICATION
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
2) MACHINING OF LUG 318[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) BRAKE SHOE TO DRG NO BOF 4020778[90]()
Specification : BRAKE SHOE TO DRG NO BOF-4020778
C
Nonestab
2) 9080079304 AIR VESSEL DESIGN NO ILG 448 PT NO IWP 1667[90]()
Specification : 9080079304 AIR VESSEL DESIGN NO ILG-448,PT NO.IWP-1667 SHT 2.
C
Nonestab
3) 9081005835 COVER TO PART NO 5141876[90]()
Specification : COVER TO PART NO.5141876
C
Nonestab
4) 9077100046 COVER MUZZLE TO DRG NASK[90]()
Specification : 9077100046 COVER MUZZLE TO DRG.NO.NASK 938/10
C
Nonestab
5) FIRING GEAR FOOT REST WELDING DRG NO 4027009[90]()
Specification : FIRING GEAR FOOT REST WELDING DRG NO 4027009
C
Nonestab
6) PEDAL LEVER TO DRG NO 5001260[90]()
Specification : PEDAL LEVER TO DRG NO 5001260
C
Nonestab
7) PEDAL WELDING AND MACHINING 5045062[90]()
Specification : PEDAL WELDING AND MACHINING 5045062
C
Nonestab
8) COVER WELDING AND MACHINING TO DRG NO 3019272[90]()
Specification : COVER WELDING AND MACHINING TO DRG NO 3019272
C
Nonestab
9) LEVER WELDING AND MACHINING DRG NO 6098805[90]()
Specification : LEVER WELDING AND MACHINING DRG NO 6098805
C
Nonestab
10) PLATE TOP WELDING MACHINING TO DRG NO 3021409[90]()
Specification : PLATE TOP WELDING & MACHINING TO DRG.NO.3021409
C
Nonestab
11) 9073000994 SEALING RING TO DRG NO 2A46M 07 70 COPPER M2 IS 191 PT III 1980 FRTP 2[90]()
Specification : SEALING RING TO DRG.NO.2A46M-07-70 COPPER M2 IS:191 PT.III-1980-FRTP-2
C
Nonestab
12) 9081008305 WHEEL CHOCK TO DRG NO GCF 50 41092[90]()
Specification : WHEEL CHOCK TO DRG. NO. GCF/50/41092
C
Nonestab
13) REAR AXLE ASSEMBLY TO DRG NO 2011598 FOR 40 MM A AGUN L 70[90]()
Specification : REAR AXLE ASSEMBLY TO DRG. NO. 2011598 FOR 40 MM A.A. GUN
L/70
C
Nonestab
14) 9070100092 FRONT AXLE ASSY IAN 39A[90]()
Specification : 9070100092 FRONT AXLE ASSY. IAN 39A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) CONNECTING PIECE FRONT TO PT NO 1148858[90]()
Specification : CONNECTING PIECE FRONT TO PT NO 1148858
C
Nonestab
2) CONNECTING PIECE REAR TO PT NO 1145139[90]()
Specification : CONNECTING PIECE REAR TO PT NO 1145139
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) HOUSING TO DRG. NO. BOF-3012784[90]()
Specification : HOUSING TO DRG. NO. BOF-3012784
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ARM CONTROL TO DESIGN NO CIA WPN 800 PT NO IAN 107A[90]()
Specification : ARM CONTROL TO DESIGN NO. CIA /WPN/ 800, PT. NO. IAN-107A COMPRISING OF DRG. NO. M2/ BOF- 5067132, 6151792 TO 6151800, 6166439, 6151811, 6151812, 62659038, 5067132, 4027766, IAN-317SA & N4-1, N4-18, N5-23, N9-8 N5-30, N2-87, N15-13, N15-
Specification : INVESTMENT CASTING OF PLATE.5189623
C
Nonestab
6) BRACKET TO DRAWING NO 1144032 item code 9081005694[90]()
Specification : BRACKET TO DRAWING NO.1144032
C
Nonestab
7) 9069086516 SPRING 6112189[90]()
Specification : 9069086516 SPRING 6112189
C
Nonestab
8) 9069111532 SPRING TO DRG NO M2 BOF 6107114[90]()
Specification : 9069111532 SPRING TO DRG.NO.M2/BOF-6107114
C
Nonestab
9) 9069112448 SPRING TO DRG NO BOF 6115658[90]()
Specification : 9069112448 SPRING TO DRG.NO.BOF-6115658
C
Nonestab
10) 9081001304 SPRING TO ART NO 6361016[90]()
Specification : 9081001304 SPRING TO ART NO 6361016
C
Nonestab
11) 9081001309 SPRING TO ART NO 4083328[90]()
Specification : 9081001309 SPRING TO ART NO 4083328
C
Nonestab
12) 9069112386 ROD PISTON FOR BUFFER DRG IAN 47SA[90]()
Specification : 9069112386 ROD PISTON(FOR BUFFER)DRG.IAN-47SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9070056926 YOKE TRAVERSING GEAR TO DS CAT NO 1015 001547[90]()
Specification : YOKE TRAVERSING GEAR TO DS CAT NO. 1015-001547
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9073000106 STEEL CASTING FOR FRAME TO DRG NO GCF TM 198 K REF DRG N0 675 51 58[90]()
Specification : (STEEL CASTING FOR FRAME TO DRG.NO.GCF TM-198(K) (REF DRG.N0 675-51-58).
C
Nonestab
2) 9069111896 FORGING DRAWING FOR PIVOT TO DRG NO REF DRG NO 3015305 GCF LM 1076 B[90]()
Specification : (FORGING DRAWING) FOR PIVOT TO DRG. NO.(REF DRG NO 3015305) GCF LM-1076(B).
C
Nonestab
3) 9069111916 FORGING DRAWING FOR LEG TO DRG NO GCF LM 1065B REF DRG NO 3015284[90]()
Specification : (FORGING DRAWING) FOR LEG TO DRG. NO.GCF LM-1065(B) REF.DRG. NO. 3015284.
C
Nonestab
4) RING DUST EXCLUDER TO DRG NO 5067781[90]()
Specification : RING DUST EXCLUDER TO DRG.NO.5067781.
C
Nonestab
5) 9073100031 PAD ELEVATING CYLINDER FORGING TO DRG NO GCF MN 5417 A[90]()
Specification : PAD ELEVATING CYLINDER (FORGING) TO DRG.NO.GCF MN-5417 (A) (REF:DRG.NO.V548-0136-1027)FORGING SHOULD BE ULTRASONICALLY TESTED AS PER SPECN:IS:8791-1978 CLASS-A FOR CREAK DETECTION & FREE FROM INTERN AL & EXTERNAL DEFECTS.
PAD ELEVATIN
C
Nonestab
6) 9080081483 BOX APPRATUS PULLING BACK GUN 2A TO DRG NO 8115 000184 ICM 1589[90]()
Specification : BOX APPRATUS PULLING BACK GUN 2A TO DRG. NO. 8115-000184/ICM -1589
C
Nonestab
7) 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120[90]()
Specification : 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120
C
Nonestab
8) 9080081547 LEVER REMOTE CONTROL IFL 7763 DRG NO 3040 003323[90]()
Specification : 9080081547 LEVER REMOTE CONTROL IFL 7763 DRG NO 3040 003323
C
Nonestab
9) 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A[90]()
Specification : 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A
C
Nonestab
10) 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A[90]()
Specification : 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A
C
Nonestab
11) 9073100022 STEEL CASTING FOR CAP TO DRG NO GCF MN 5398 B[90]()
Specification : 9073100022 STEEL CASTING FOR CAP TO DRG NO GCF MN 5398 B
C
Nonestab
12) 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C[90]()
Specification : 9073100028 PAD DEFLECTOR GUARD BRACKET CASTING TO DRG NO GCF MN 5414 C
C
Nonestab
13) 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B[90]()
Specification : 9073100030 PAD BOTTOM CASTING TO DRG NO GCF MN 5416 B
C
Nonestab
14) RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330 023797[90]()
Specification : RETAINER PACKING CROSS SECTIONAL TO DS CAT NO 5330-023797
C
Nonestab
15) HOUSING ARMATURE SOFT IRON 50 M 00 d DIA 9MM THICK TO DRG NO 5047925[90]()
Specification : HOUSING ARMATURE SOFT IRON 50 M 00/d,DIA 9MM THICK TO DRG.NO. 5047925
C
Nonestab
16) PISTON ROD TO DRG NO 4024497[90]()
Specification : PISTON ROD TO DRG.NO.4024497.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Finished Through IC Machining route for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112637 PISTON BOF 5065970[90]()
Specification : PISTON BOF 5065970
C
Nonestab
2) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]()
Specification : BEARING SLEEVE TO DS CAT NO. 3120-104751
C
Nonestab
9) 9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533[90]()
Specification : 9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) TRIGGER (FINISH) FOR PISTOL AUTO 9MM 1A.[70]()
Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.
C
Nonestab
2) PRE-MACHINED BARREL BLANK FOR 9MM AUTO PISTOL[70]()
Specification : PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OF
C
Nonestab
3) HD.BREECH BOLT UPTO OPN. ST. XIV FOR .315 SPORTING RIFLE[70]()
Specification : HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PER RFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE.
C
Nonestab
4) EXTRACTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS[70]()
Specification : EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12, MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN & 1 FOR THICK SERI
C
Nonestab
5) BODY FINISH FOR 9MM AUTO PISTOL[70]()
Specification : BODY TO DS CAT NO 1005-003145 (DC-26821-SA). MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1 OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE SHT.NO.1 FOR PISTOL 9MM 1A.
C
Nonestab
6) SLIDE FINISH FOR 9MM AUTO PISTOL[70]()
Specification : SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A.
Specification : EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.
C
Nonestab
9) BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V) OF RIFLE 5.56MM.INSAS.[70]()
Specification : BLANK FOR BARREL EXTENSION(UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*6-S. FOR RIFLE 5.56MM.INSAS. (MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE)
C
Nonestab
10) HAMMER MK-2 FOR PISTOL 9MM AUTO 1A.[70]()
Specification : HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1
21) SEMI FINISH BLANK OF HAMMER FOR RIFLE 5.56MM INSAS.[70]()
Specification : MATERIAL BS 970 PT I:1983-655 M-13 En-36B
C
Nonestab
22) SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS.AS PER RFI SK.NO.6448*2 (EXCEPT HEAT TREATMENT AND PHOSPHATING).[79]()
Specification : SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS.AS PER RFI SK.NO.6448*2 (EXCEPT HEAT TREATMENT AND PHOSPHATING).
C
Nonestab
23) BLANK FOR SEAR SAFETY (AS PER RFI SK. NO. 5076*10) FOR RIFLE 5.56MM INSAS.(WITH FIRMS MATL.)[79]()
Specification : BLANK FOR SEAR SAFETY AS PER RFI SK. NO. 5076*10FOR RIFLE 5.56MM INSAS.(WITH FIRMS MATL.)
C
Nonestab
24) GAS REGULATOR FOR RIFLE 5.56MM.INSAS[70]()
Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).
29) FINISH COMPT EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS [79]()
Specification : F/COMPT EJECTOR SMALL ARMS CARTRIDGE DRG.NO.2689/1,SHT-5 TODS CAT NO.1005-007905(DC-26518-SA) FOR RIFLE 5.56MM INSAS.MACRO ETCH TEST TO CONFORM ASTM381-84STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE 2.NMIR TEST AS PER IS4163-82WITH ACCEPT.STD.3FO
C
Nonestab
30) FINISH RETAINER FOR RIFLE 5.56MM INSAS [79]()
Specification : F/COMPT RETAINER TO D.S.CAT NO.1005-007824(DC-24129-SA) FOR RIFLE 5.56MM INSAS
C
Nonestab
31) FINISH LEVER CHANGE FOR RIFLE 5.56MM INSAS [79]()
Specification : F/COMPT LEVER CHANGE TO D.S.CAT NO.1005-007811(DC-26553-SA) FOR RIFLE 5.56MM INSAS
C
Nonestab
32) CONNECTOR BUTT EXR. FOR RIFLE 5.56MM EXCALIBUR[70]()
Specification : CONNECTOR BUTT EXR. FOR 5.56MM EXCALIBUR TO RFI SK.NO.7326
C
Nonestab
33) DUMMY SHELL (N) FOR TEAR GAS GUN.[70]()
Specification : DUMMY SHELL (N) FOR TEAR GAS GUN.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A[90]()
Specification : 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) TRAIL LOCKING BAR LEFT AND RIGHT TO PART NO 1147189 AS PER ANNEXURE NO DHANUSH 1147189 2017[90]()
Specification : TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017.
C
Nonestab
2) LEVER LEFT TO DRG NO BOF 5047789[90]()
Specification : LEVER LEFT TO DRG NO BOF 5047789
C
Nonestab
3) LEVER RIGHT TO PART NO BOF 5047788[90]()
Specification : LEVER RIGHT TO PART NO BOF 504778
C
Nonestab
4) LEVER RIGHT TO DRG NO DS CAT 1015 000771[90]()
Specification : LEVER RIGHT TO DRG NO DS CAT 1015 000771
C
Nonestab
5) PLATE AS PER DRAWING NO 5183023[90]()
Specification : PLATE AS PER DRAWING NO 5183023
C
Nonestab
6) 9081008276 PLATE AS PER DRAWING NO 5175362[90]()
Specification : PLATE AS PER DRAWING NO.5175362
C
Nonestab
7) BASE PLATE AS PER DRG NO 3052701[90]()
Specification : BASE PLATE AS PER DRG NO 3052701
C
Nonestab
8) 9069112695 LEVER RIGHT TO PART NO BOF 5047788[90]()
Specification : 9069112695 LEVER RIGHT TO PART NO BOF 5047788
C
Nonestab
9) LEVER WELDING AND MACHINING DRG NO 6098805[90]()
Specification : LEVER WELDING AND MACHINING DRG NO 6098805
C
Nonestab
10) PLATE TOP WELDING MACHINING TO DRG NO 3021409[90]()
Specification : PLATE TOP WELDING & MACHINING TO DRG.NO.3021409
C
Nonestab
11) 9080081547 LEVER REMOTE CONTROL IFL 7763 DRG NO 3040 003323[90]()
Specification : 9080081547 LEVER REMOTE CONTROL IFL 7763 DRG NO 3040 003323
C
Nonestab
12) 9081008305 WHEEL CHOCK TO DRG NO GCF 50 41092[90]()
Specification : WHEEL CHOCK TO DRG. NO. GCF/50/41092
C
Nonestab
13) 9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533[90]()
Specification : 9077100212 TAIL D C MK 4 STAMP NO 6990 TO DRAWING NO NAD 7533
R
Nonestab
14) 9081001426 GIRLLE ART NO 5182528[90]()
Specification : GIRLLE ART,NO 5182528
C
Nonestab
15) 9070056913 LEG SEMI TRAILER RETRACTABLE SUPPORT TO DRG NO 2590001789[90]()
Specification : LEG SEMI TRAILER RETRACTABLE SUPPORT TO DRG.NO. 2590-001789
C
Nonestab
16) 9070056922 LEG SEMI TRAILER RETRACTABLE SUPPORT TO DS CAT NO 2590001788[90]()
Specification : LEG SEMI-TRAILER RETRACTABLE SUPPORT TO DS CAT NO. 2590-001788
C
Nonestab
17) 9077301196 LEVER LOADING PENDULUM CAT PART NO 1147159[90]()
Specification : LEVER(LOADING PENDULUM) CAT PART NO.-1147159
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL[70]()
Specification : BUTT TO DRG NO 30P 5011 REQD FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLATE BUTT RELEASE FOR MGL TO DRG. NO.30P 5014[70]()
Specification : AS PER DRG OF PLATE BUTT RELEASE FOR MGL TO DRG. NO.30P 5014
C
Nonestab
2) BRUSH CLEANING SMALL ARMS TO DRG NO:30T 1700 018 A4 FOR MGL[70]()
Specification : AS PER DRG OF BRUSH CLEANING SMALL ARMS TO DRG NO:30T 1700 018 A4 FOR MGL
C
Nonestab
3) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
2) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
3) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]()
Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL
C
Nonestab
4) Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR[70]()
Specification : Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
E
Nonestab
5) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]()
Specification : AS PER OFT REQUIREMENTS
E
Nonestab
6) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
R
Nonestab
7) MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL
R
Nonestab
8) Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material[70]()
Specification : Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material
R
Nonestab
9) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
10) ROCKER TO DRG NO C5025 IN FULLY FINISHED WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5025 200 E3 REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
11) C2003 SHIELD FULLY FINISHED THROUGH FORGING ROUTE TEND 2096 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()
Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)[61]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
2) Machining of CAP of 9MM Carbine in finished condition[70]()
Specification : MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)
C
Nonestab
3) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*
R
Nonestab
4) TRIGGER ASSEMBLY TO DS CAT NO 1005 006589[70]()
Specification : TRIGGER ASSEMBLY TO DS CAT NO 1005 006589 DC(1) NO 26375 SA DT 05/09/07 WITH DETAILS OF LATEST ISSUE INSPECTION TO BE GOVERN BY RELEVANT CLAUSES OF SPECN JSS-1005-04 2006 OF LATE ST ISSUE and ANY OTHER ACCEPTANCE CRITERIA TO BE PROVIDED B
C
Nonestab
5) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C[62]()
Specification : PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02[63]()
Specification : Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) WASHER TO DRG NO 219 35 186 TRACK T 90 L F NO 6120100106[61]()
Specification : WASHER TO DRAWING NUMBER 219.35.186 {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 19903-74,GOST 1577-93,GOST 14959-79,520 TY 1 PROCESS SHEETS-COLD STAMPING, ISOTHERMAL HARDENING.
C
Estab
2) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]()
Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Estab
3) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]()
4) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
5) RING NUT MCD 450 KG L F NO 6230900904[62]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Estab
6) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED].
C
Estab
7) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Estab
8) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]()
Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S
C
Estab
2) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]()
Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS
C
Estab
3) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
4) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
5) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]()
Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T
C
Nonestab
6) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]()
Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL[91]()
Specification : FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED)
TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING HOLDER 250 KG (6240100124)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG 450 KG (MCD) (6231101105)[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122
DET 14. [DRG. ENCLOSED].
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING AND MACHINING OF TA LINK (6120100128)[61]()
Specification : TA LINK TO DRAWING NO.OFM-32844.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/
TDS/TECH/04 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG NO32844.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING & MACHINING OF TA CLAMP(6120100130)[61]()
Specification : TA CLAMP TO DRG.NO.OFM-32843.COMPONENT SHALL BE MADE FROM
[CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS
/TECH/02 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO-32843]
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG 450 KG (MCD) (6231101105)[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122
DET 14. [DRG. ENCLOSED].
C
Nonestab
2) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
3) MACHINING OF LUG 318[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) DETONATOR HOLDER 450 KG (6230901206)[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED)
TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Nonestab
2) RING NUT 250 KG (6240900904)[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/
9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Estab
3) BASE TRANSIT (250KG) (6240900104)[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Nonestab
2) 81 MM SHELL CASTING IN MACHINED CONDITION[99]()
Specification : MANUFECTURING OF 81 MM SHELL CASTING IN MASHINED CONDITION TO DRAWING NO OFM 33034.
C
Nonestab
3) CLAMP TO DRG. NO. 172.55.025[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
4) TA LINK MACHINED[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
5) TA CLAMP MACHINED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
6) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
C
Nonestab
7) Washer for 1000lbs (6220901111)[62]()
Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO
IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY
C
Nonestab
8) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
9) FILLING PLUG ( 250 KG) (6240000504)[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
10) Nose Plug 1000LBS(6220901044)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE
TREATED]. [DRG. ENCLOSED.
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788.
C
Nonestab
12) SET OF TA SHOE & TA GUIDE MACHINED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
13) SET OF TA SHOE & TA GUIDE HEAT TREATED[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
14) MACHINING OF TRACK GUIDE[61]()
Specification : AS PER OFM APECIFICATION
C
Nonestab
15) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
16) NOSE PLUG 450KG (6230900504)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7
[DRG. ENCLOSED]. [W/O SURFACE TREATED.
C
Nonestab
17) PLUG 450 KG (MCD) (6231101105)[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122
DET 14. [DRG. ENCLOSED].
C
Nonestab
18) PLUG (MCD) 250KG (6240901205)[62]()
Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED]
DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
19) PLUG DUMMY 250 KG (6241101114)[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5
SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
20) Protecting Ring Assly 1000LBS (6220900610)[62]()
Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING AS PER DRG.
NO. ARM-1460 D CONSISTING OF:-PROTECTING RIM - 4 [HALVES],
CLAMPING PLATE 2 NOS, CAP 2 NOS, BOLT NUT AND SPRING WASHER
8 NOS. EACH. [DRG. ENCLOSED]. { NOTE:- TO COVER UP
C
Nonestab
21) STOPPER BODY (LOCK HOUSONG) (7200018054)[72]()
Specification : STOPPER BODY (LOCK HOUSING) TO DRAWING NO.175.18.054/C
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
23) TRACK LINK DRG. NO. 172.55.012[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
24) WASHER FOR NOSE PLUG 1000LBS (6220901052)[62]()
Specification : WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO
IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002,
OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]()
Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BLANKS FOR BODY CASTING TO GSF DRG. NO. C-1946G DT. 07/05/12[62]()
Specification : BLANK FOR BODY CASTING TO GSF DRG. NO. C-1946G DT. 07/05/12
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BODY FOR 76 POINT 2 MM PRE FRAG GSF SK M 7921 A[91]()
Specification : MACHINING AND PROCESSING OF BODY FOR 76.2 MM PRE FRAG GSF SK M-7921 A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING[91]()
Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING
C
Nonestab
2) NUT TO DET NO 2 16 OF DRG NO 3 024045 IN FC TO SK NO OTF DD 006[64]()
Specification : NUT TO DET NO 2-16 OF DRG NO 3-024045 IN FINISH CONDITION TO SK NO OTF/DD/006
C
Nonestab
3) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]()
Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]()
Specification : I.A. 1204
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PLUG REPRESENTING FUZE FOR 40MM LOW[60]()
Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : CQA (A) 2316
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) COVERING DISC ARDE1925 DET 5 IRW172[60]()
Specification : DRG.NO.ARDE 1925 DET.NO.5 PART NO.IRW- 172
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) HOUSING PRIMER ALLUM.FOR FUZE M605[6335802100]()
1) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]()
Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) DRIFT PIN TO DESIGN NO.CQA/WPN/1284 PART NO. ICM 2114 (C9041). REQD FOR 30mm CANNON. DS.CAT.NO.5120-409529. DC NO.19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.[70]()
Specification : AS PER DRG TO DRIFT PIN TO DESIGN NO.CQA/WPN/1284 PART NO. ICM 2114 (C9041). REQD FOR 30mm CANNON. DS.CAT.NO.5120-409529.
DC NO.19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.
C
Nonestab
2) DRIFT PIN TO DS CAT NO. 5120-415474 DES NO.CQA/WPN/1286 PART NO.ICM 2116 (C9045) FOR 30mm CANNON DC NO. 19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.[70]()
Specification : AS PER DRG TO DRIFT PIN TO DS CAT NO. 5120-415474 DES NO.CQA/WPN/1286 PART NO.ICM 2116 (C9045) FOR 30mm CANNON
DC NO. 19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) OPEN FORGING TO DRG NO TEND 1831 REQUIRED FOR BREECH C2001 TO DRG No 2A42 02 001 FOR IFD ONLY 30mm CANNON[70]()
Specification : AS PER DRG OF OPEN FORGING TO DRG.No.: TEND-1831* REQUIRED FOR BREECH(C2001)
TO DRG.No.: 2A42 02 001 (FOR IFD ONLY) (30mm CANNON)
C
Nonestab
2) RANGE PLATE RH TO DRG NO 30P 4009 st 2 REQUIRED FOR 40mm MGL[70]()
Specification : As per Drawing and specification
C
Nonestab
3) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
4) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
5) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]()
Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL
C
Nonestab
6) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]()
Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL
C
Nonestab
7) MAGAZINE BOX ASSY[74]()
Specification : MAGAZINE BOX ASSY AS PER DRG.Y25676A-00 FOR MAGAZINE ASSY OF SRCG
C
Nonestab
8) INSERT TO DRG NO 2A42 01 002 WITH FIRM S MATERIAL REQD FOR 30mm CANNON C1002 DC No 18845 W DT 13 01 2004 FOR DC LATEST ISSUE TO BE FOLLOWED[70]()
Specification : INSERT TO DRG NO. 2A42.01.002 (WITH FIRM'S MATERIAL) REQD FOR 30mm CANNON (C1002) DC No. 18845-W DT.13.01.2004. FOR DC LATEST ISSUE TO BE FOLLOWED
C
Nonestab
9) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]()
Specification : AS PER OFT REQUIREMENTS
E
Nonestab
10) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
R
Nonestab
11) MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL
R
Nonestab
12) Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material[70]()
Specification : Manufacture and supply of MGL Extractor before anodic coating to Drg No Tend 2252 st with firm material
R
Nonestab
13) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
14) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
15) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
16) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHOULDER LOCKING BLANK [70]()
Specification : AS PER DRG. NO. TEND 2131 (SIZE : 7.10)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
2) MACHINING MILLING AND GRINDING OF ANTI REBOUND C1048 TO DRG NO TEND 2174 STAR WITH FIRMS MATERIAL[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONNECTING LINK RIGID IN FULLY FINISHED TO DRG NO C5056 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5056 200 F3 REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) C2003 SHIELD FULLY FINISHED THROUGH FORGING ROUTE TEND 2096 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING OF SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2747 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM CASING C2012 RAW MATERIAL WILL BE SUPPLIED BY OFT[70]()
Specification : AS per TE
C
Nonestab
2) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR TO DRG No 2A42 05 029 C5029 WITH FIRMS MATERIAL DSCAT NO 1005 560073 ITEM TO BE MANUFACTURED THROUGH FORGING ROUTE REFER FORGING TO DRG NO 64C 5029 200 C3 LATEST DC TO BE FOLLOWED LATESE DC NO19118 DT 18 03 2008[70]()
Specification : As per TE
C
Nonestab
2) ROCKER TO DRG NO C5025 IN FULLY FINISHED WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5025 200 E3 REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) C1005 STRIP FULLY FINISHED THROUGH FORGING ROUTE DRG NO 64C 1005 200 F3 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
2) MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG NO CC533 C TO DISTANCE TUBE OF 84 MM TPT TO DRG NO F 1301 047281 D WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG. NO. CC533-C TO DISTANCE TUBE OF 84 MM TPT TO DRG. NO. F 1301-047281 D (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL()
Specification : MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL
R
Nonestab
Category :
Grade : Grade III
Size :
S
2069
Global Traders
Plot No 159, Pocket C-8, Opp. Bank Of Baroda Sector 17, Dwarka New Delhi New Delhi
PIN1 : 110078
Phone No. : 9999212416
1) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].
C
Nonestab
2) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
3) RING NUT MCD 450 KG L F NO 6230900904[62]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
4) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED].
C
Nonestab
5) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
6) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Nonestab
7) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Nonestab
8) PROTECTING RING ASSEMBLY L F NO 6220900611[62]()
Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING TO DRG. NO. 1460D. R.NO. 9 DTD. 03-11-17 {NOTE:- TO COVER UP ASSEMBLY REJECTION ITEM NO.4 SHOULD BE SUPPLIED 5% EXTRA} [DRG. ENCLOSED].
C
Nonestab
9) ROLLING RING 450 KG L F NO 6231100104[62]()
Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.-ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, MAKE OF ITEM NOS.4,5,6 AND 7 IS LPS/UNBRAKO/GKW.
C
Nonestab
10) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]()
Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.
C
Nonestab
11) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]()
Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) ROLLING RING ASSY 250 KG L F NO 6241100114[62]()
Specification : ROLLING RING ASSY. TO DRG. No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED]
C
Nonestab
2) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
3) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
4) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]()
Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T
C
Nonestab
5) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]()
Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]()
Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED
C
Nonestab
2) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Nonestab
3) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]()
Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED]
C
Nonestab
4) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
5) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]()
6) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]()
Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED)
C
Nonestab
7) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]()
Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
8) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]()
Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
9) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED].
C
Nonestab
10) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
11) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
12) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
13) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
14) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED]
C
Nonestab
15) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173[62]()
Specification : LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]()
Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N
C
Nonestab
2) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]()
Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED
C
Nonestab
3) FILLING PLUG MACHINED LF NO 6250700174[62]()
Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)
C
Nonestab
4) LUG SUSPENSION NO 318 Item code 6250700175[62]()
Specification : LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)
C
Nonestab
Category :
Grade : Grade III
Size :
S
2074
S.S.ENTERPRISE
34, HAMID MUNSHI LANE BELILIOUS ROAD HOWRAH West Bengal
PIN1 : 711101
Phone No. : 26662926 GSTIN : 19AAOFS4775N1Z4
1) BODY TO DRG NO TF-007 IN FINISHED CONDITION[63]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BODY FROM RAW MATERIAL DRAWING NO. NAI(J)/501/1. (R/M: 133002022)[91]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL[91]()
Specification : FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Dumdum
Name
Specification
Use
Status
1) FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION[62]()
Specification : FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6120900102 FIN ASSLY WITH BAND FOR 125MM HE 1A[61]()
Specification : FIN ASSEMBLY TO DRAWING NO.4-024610 DETAIL NO.30 DC 36892-A.DT.12/04/2003 FOR 125 MM HE AMMUNITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) Plug Representing Fuze in FC TO DRG NO M 10394
Description : Plug Representing Fuze in FC TO DRG NO M 10394()
Specification : As per drg. no. M-10394
C
Estab
2) PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C
Description : PROOF MACHINED BODY FOR 51 MM HE to DRG NO SK 8345 C()
Specification : DRG. NO. SK-8345/C
C
Estab
3) FUNNEL TO DET NO 026 OF DRG NO 4 025998 WITHOUT SURFACE TREATEMENT
Description : FUNNEL TO DET NO 026 OF DRG NO 4 025998 WITHOUT SURFACE TREATEMENT()
Specification : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
C
Estab
4) BLANKS FOR BODY C 1946 H
Description : BLANKS FOR BODY C 1946 H()
Specification : BLANKS FOR BODY TO GSF DRG. NO. C-1946H DT. 25/04/17
C
Estab
5) BODY PROJECTILE ARDE 1925
Description : BODY PROJECTILE ARDE 1925()
Specification : BODY PROJECTILE TO (DRG NO ARDE-1925 DET NO 8)
C
Estab
6) BLANK FOR DISTANCE TUBE TO TO GSF DRG NO F 1947 DCI NO 37282 A
Description : BLANK FOR DISTANCE TUBE TO TO GSF DRG NO F 1947 DCI NO 37282 A()
Specification : BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011
C
Estab
7) FORGING BODY M 10897
Description : FORGING BODY M 10897()
Specification : FORGING BODY TO DRG NO M-10897
C
Estab
8) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT
Description : STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Estab
9) SEMI MACHINED UNION RING US 939211001
Description : SEMI MACHINED UNION RING US 939211001()
Specification : SEMI MACHINED UNION RING TO DRG NO. US-939211001
C
Estab
10) CAP ISX 491
Description : CAP ISX 491()
Specification : CAP TO DRG NO ISX 491 IN F/C. DC(1). 31341-A DT. 6.9
C
Estab
11) TUBE BLANK FOR SK NO OTF S 006 1B FOR 125 mm HEAT SHELL
Description : TUBE BLANK FOR SK NO OTF S 006 1B FOR 125 mm HEAT SHELL()
Specification : TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL
C
Estab
12) FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO DC 154 D
Description : FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO DC 154 D()
Specification : FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO DC 154-D
C
Estab
13) BODY IQX 789
Description : BODY IQX 789()
Specification : BODY IN F/CONDITION IQX-789
C
Estab
14) HEAD ASSY IQX 78 A
Description : HEAD ASSY IQX 78 A()
Specification : HEAD ASSY IN F/ CONDITION ARDE 1926. DET NO. 5 PT NO-IQX-78 A
C
Estab
15) BASE CARTRIDGE 120MM CHARGE 3 IN FINISH CONDITION
Description : BASE CARTRIDGE 120MM CHARGE 3 IN FINISH CONDITION()
Specification : BASE CARTRIDGE 120MM CHARGE 3 IN FINISH CONDITION
C
Estab
16) DIE CAST ZINC BASE ALLOY DRG NO 1616 B
Description : DIE CAST ZINC BASE ALLOY DRG NO 1616 B()
Specification : DIE CAST ZINC BASE ALLOY DRG. NO1616 B
C
Estab
17) DIE CAST FOR PLUG TO CASTING DRG NO 1617 A
Description : DIE CAST FOR PLUG TO CASTING DRG NO 1617 A()
Specification : DIE CAST FOR PLUG TO CASTING DRG. NO-1617/A
C
Estab
Category : dp
Grade : 2
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING[90]()
Specification : SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) BODY WITH BAND [FOR 30MM AP(T)]
Description : BODY WITH BAND [FOR 30MM AP(T)]()
Specification : DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A, DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-34183-A Dt.28.07.87 (2
C
Estab
Category : p
Grade : 3
Size :
S
2075
Gescons (1961) Private Limited
111 Basanta Lal Saha Road, Kolkata, W.B - 700053 B L SAHA ROAD KOLKATA West Bengal
PIN1 : 700053
Phone No. : 24306180 GSTIN : 19AAACG9247N1ZZ
1) Body Trigger for MAG
Description : Body Trigger for MAG()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
