List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1921 Indo MIM Pvt. Ltd.
Plot No 45(P), KIADB Industrial Area Hoskote Bangalore Karnataka
PIN1 : 562114
Phone No. : 22048800
GSTIN : 29AABCI0484L1ZA 		BLRA01418E

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 ALT STAR[70]() Specification : IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 ALT STAR C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
2) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
3) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Cocking bracket for JVPC[70]() Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598* C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Bracket fore Sight for JVPC[01]() Specification : Investment Casting Bracket Fore Sight JVPC 5.56mm as per Drg. No. SK-JVPC-6004* C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Cocking bracket for JVPC[70]() Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598* C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting Cocking bracket for JVPC[70]() Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598* C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting of Trigger for Revolver[01]() Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09 C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory
Name Specification Use Status
1) Investment Casting of Trigger for Revolver[01]() Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09 C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.[70]() Specification : SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A. C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) SLIDE FOR 0.32 PISTOL.[70]() Specification : STEEL BS:970 PT .1. 1994 GRADE 070 M55 (EN-9) TREATMENT:-BEFORE MACHINING 220 TO 260 HV C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.[70]() Specification : SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A. C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR.[70]() Specification : MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2 C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING OF GUARD TRIGGER[70]() Specification : INVESTMENT CASTING OF GUARD TRIGGER TO RFI SK.NO.4312*12(LATEST DC.04/003/05 DT.17/02/05).FOR .315" SPORTING RIFLE C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING OF BODY FOR 12 BORE PAG.[70]() Specification : MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A' C Nonestab
2) INVESTMENT CASTING OF RECEIVER FOR 0.32[70]() Specification : bs C Nonestab
3) INVESTMENT CASTING OF BRACKET(WITH HEAT TREATMENT) FOR RIFLE 5.56MM.INSAS.[70]() Specification : bs C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) IC BLOCK GAS OF 7.62 MM ASSUALT RIFLE GHAATAK,[70]() Specification : IC BLOCK GAS OF 7.62 MM ASSUALT RIFLE GHAATAK, RFI SK. NO.9727*AR (LT.DC. NO. 11E/026/17 DT.25/05/2017 C Nonestab
2) INVESTMENT CASTING OF RECEIVER FOR 0.32[70]() Specification : bs C Nonestab
3) INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*13FOR RIFLE 5.56MM INSAS[70]() Specification : AS PER DRAWING C Nonestab
4) INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) COCKING HANDLE GRIP FOR 12 BORE MODIFIED PUMP ACTION GUN RFI DRG NO PAG 0056[70]() Specification : COCKING HANDLE (GRIP) FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG. NO. PAG-0056. (MATL.-NYLON-66 TO SPECN. DEF-STD.93-8/1, COLOUR- BLACK) C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]() Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) MODIFIED LEVER CHANGE FOR ASSAULT RIFLE GHAATAK[70]() Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK) C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) I C BLOCK GAS FOR ASSUALT RIFLE GHAATAK[7020312052]() Specification : I C BLOCK GAS FOR ASSUALT RIFLE GHAATAK C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING OF BODY for 9mm auto pistol[70]() Specification : INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*6FOR PISTOL AUTO 9MM 1A (LT.DC.NO.02/03/19 DT.02-03-19) C Nonestab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN[70]() Specification : INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN FROM TRADE SOURCES RFI SK NO. -9093-GG/A C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) AUTO SEAR TO DRG NO MIM K 2067 00 TAR[70]() Specification : AUTO SEAR TO DRG NO MIM K 2067 00 TAR R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR[70]() Specification : LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) AUTO SEAR TO DRG NO MIM K 2067 00 TAR[70]() Specification : AUTO SEAR TO DRG NO MIM K 2067 00 TAR R Nonestab
2) SUPPLY OF EXTRACTOR AS PER DRG NO MIM K 2012 00[70]() Specification : AS PER DRG NO MIM K 2012 00 R Nonestab
3) LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR[70]() Specification : LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR R Nonestab
4) SUPPLY OF DISCONNECTOR AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL R Nonestab
5) COMPENSATOR AS PER DRG NO MIM K 1021 01 TAR[70]() Specification : COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR) R Nonestab
6) REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR[70]() Specification : REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR R Nonestab
7) CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR[70]() Specification : CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR R Nonestab
8) LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR[70]() Specification : LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR R Nonestab
9) RETAINER TO DRG NO MIM K 2091 01 TAR[70]() Specification : RETAINER TO DRG NO MIM K 2091 01 TAR R Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) AUTO SEAR TO DRG NO MIM K 2067 00 TAR[70]() Specification : AUTO SEAR TO DRG NO MIM K 2067 00 TAR C Estab
2) LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR[70]() Specification : LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR C Estab
3) COMPENSATOR AS PER DRG NO MIM K 1021 01 TAR[70]() Specification : COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR) C Estab
4) REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR[70]() Specification : REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR C Estab
5) CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR[70]() Specification : CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR C Estab
6) LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR[70]() Specification : LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR C Estab
7) RETAINER TO DRG NO MIM K 2091 01 TAR[70]() Specification : RETAINER TO DRG NO MIM K 2091 01 TAR C Estab
8) FRONT GUIDE RETAINER AS PER Drg No MIM K 2033 00 TAR[70]() Specification : FRONT GUIDE RETAINER AS PER Drg No MIM K 2033 00 TAR C Nonestab
9) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL C Nonestab
10) Lever Locking Slide FB to Drg No MIM K 4007 00[70]() Specification : Lever Locking Slide FB to Drg. NO. MIM-K-4007-00 C Nonestab
11) REAR SIGHT LEAF TFS TO DRG No MIM K 2121 00[70]() Specification : REAR SIGHT LEAF (TFS) TO DRG No MIM K 2121 00 C Nonestab
12) REAR SIGHT ELEVATING SLIDE AS PER DRG No MIM K 2025 00[70]() Specification : REAR SIGHT ELEVATING SLIDE AS PER DRG No MIM K 2025 00 C Nonestab
13) REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG No MIM K 2023 00[70]() Specification : REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG No MIM K 2023 00 C Nonestab
14) SLEEVE FRONT SIGHT FOR TAR AS PER DRG No MIM K 1033 00[70]() Specification : SLEEVE FRONT SIGHT FOR TAR AS PER DRG No MIM K 1033 00 C Nonestab
15) PIVOT PIN FOR TAR AS PER DRG No MIM K 4009 00[70]() Specification : PIVOT PIN FOR TAR AS PER DRG No MIM K 4009 00 C Nonestab
16) PIN AUTO SEAR HAMMER TRIGGER FOR TAR AS PER DRG No MIM K 2062 00[70]() Specification : PIN AUTO SEAR HAMMER TRIGGER FOR TAR AS PER DRG No MIM K 2062 00 C Nonestab
17) HOUSING FRONT SIGHT FOR TAR AS PER DRG No MIM K 1031 00[70]() Specification : HOUSING FRONT SIGHT FOR TAR AS PER DRG No MIM K 1031 00 C Nonestab
18) FRONT SIGHT FOR TAR AS PER DRG NO MIM K 1032 00[70]() Specification : FRONT SIGHT FOR TAR AS PER DRG NO MIM K 1032 00 C Nonestab
19) FRONT SIGHT BLOCK FOR TAR AS PER DRG No MIM K 1207 00[70]() Specification : FRONT SIGHT BLOCK FOR TAR AS PER DRG No MIM K 1207 00 C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory

[Deemed Registration]
Name Specification Use Status
1) CATCH BARREL FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
2) CATCH HAMMER FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
3) LEVER EXTRACTOR FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
4) LEVER SPRING MAIN FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
5) MANUFACTURING & SUPPLY OF SMAL ARMS COMPONENTS THROUGH MIM ROUTE[AS PER DRAWING]() AS PER DRAWING C Established
6) MANUFACTURING&SUPPLY OF SMALL ARMS COMPONENTS THROUGH MIM ROUTE[AS PER DRAWING]() AS PER DRAWING C Established
7) PAWL FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
8) STOP CYLINDER FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
9) STOP SAFETY FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
10) TRIGGER FOR REVOLVER .32"[AS PER DRAWING]() AS PER DRAWING C Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COMPENSATOR AS PER DRG NO MIM K 1021 01 TAR[70]() Specification : COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR) C Estab
2) REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR[70]() Specification : REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR C Estab
3) FRONT GUIDE RETAINER AS PER Drg No MIM K 2033 00 TAR[70]() Specification : FRONT GUIDE RETAINER AS PER Drg No MIM K 2033 00 TAR C Estab
4) Lever Locking Slide FB to Drg No MIM K 4007 00[70]() Specification : Lever Locking Slide FB to Drg. NO. MIM-K-4007-00 C Estab
5) REAR SIGHT LEAF TFS TO DRG No MIM K 2121 00[70]() Specification : REAR SIGHT LEAF (TFS) TO DRG No MIM K 2121 00 C Estab
6) REAR SIGHT ELEVATING SLIDE AS PER DRG No MIM K 2025 00[70]() Specification : REAR SIGHT ELEVATING SLIDE AS PER DRG No MIM K 2025 00 C Estab
7) REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG No MIM K 2023 00[70]() Specification : REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG No MIM K 2023 00 C Estab
8) SLEEVE FRONT SIGHT FOR TAR AS PER DRG No MIM K 1033 00[70]() Specification : SLEEVE FRONT SIGHT FOR TAR AS PER DRG No MIM K 1033 00 C Estab
9) PIVOT PIN FOR TAR AS PER DRG No MIM K 4009 00[70]() Specification : PIVOT PIN FOR TAR AS PER DRG No MIM K 4009 00 C Estab
10) PIN AUTO SEAR HAMMER TRIGGER FOR TAR AS PER DRG No MIM K 2062 00[70]() Specification : PIN AUTO SEAR HAMMER TRIGGER FOR TAR AS PER DRG No MIM K 2062 00 C Estab
11) HOUSING FRONT SIGHT FOR TAR AS PER DRG No MIM K 1031 00[70]() Specification : HOUSING FRONT SIGHT FOR TAR AS PER DRG No MIM K 1031 00 C Estab
12) FRONT SIGHT BLOCK FOR TAR AS PER DRG No MIM K 1207 00[70]() Specification : FRONT SIGHT BLOCK FOR TAR AS PER DRG No MIM K 1207 00 C Estab
13) GAS PORT BLOCK AS PER DRG No MIM K 1205 00[70]() Specification : GAS PORT BLOCK AS PER DRG No MIM K 1205 00 C Nonestab
14) TRIGGER FOR GENERAL ASSEMBLY OF TAR AS PER DRG No MIM K 2064 00[70]() Specification : TRIGGER FOR GENERAL ASSEMBLY OF TAR AS PER DRG No MIM K 2064 00 C Nonestab
15) HAMMER FOR GENERAL ASSEMBLY OF TAR AS PER DRG No MIM K 2061 00[70]() Specification : HAMMER FOR GENERAL ASSEMBLY OF TAR AS PER DRG No MIM K 2061 00 C Nonestab
16) MANUFACTURING AND SUPPL OF BULLET GUIDE TO DRG No MIM K 1101 01[70]() Specification : MANUFACTURING AND SUPPL OF BULLET GUIDE TO DRG No MIM K 1101 01 C Nonestab
Category :
Grade : Grade III
Size : L
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) HOUSING SIGHT REAR THROUGH MIM ROUTE FOR JVPC Description : HOUSING SIGHT REAR THROUGH MIM ROUTE FOR JVPC() Specification : HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204-03-04-11-19-005-00DA C Estab
Category : ddp
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BALL IN FINISHED CONDITION TO ARDE DRG NO 2052 6 GSF SK NO M 8034 Description : BALL IN FINISHED CONDITION TO ARDE DRG NO 2052 6 GSF SK NO M 8034() Specification : BALL IN FINISHED CONDITION TO ARDE DRG. NO. 2052/6 (GSF SK No. M-8034) C Estab
Category : ddp
Grade : 3
Size : L
1) Small Arms Factory
Name Specification Use Status
1) SEAR FOR JVPC 5 56 MM[70]() Specification : Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA. C Nonestab
2) Wheel Rear Sight for JVPC through MIM Route[70]() Specification : Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route) C Nonestab
3) Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route[70]() Specification : Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route C Nonestab
4) Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route[70]() Specification : Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route C Nonestab
5) STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE[70]() Specification : Stud Cocking Handle DRG No.0204-03-04-00-01-013-00DA for JVPC 5.56 mm Through (MIM Route) C Nonestab
6) Wheel Lock through MIM route for JVPC[70]() Specification : Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route) C Nonestab
7) HAMMER MIM ROUTE FOR JVPC[7012471813]() Specification : HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA C Nonestab
8) Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route[70]() Specification : Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route C Nonestab
9) Trigger Rear for JVPC 5 56 30MM To Drg No 0204 03 04 02 14 009 00DA MIM Route[70]() Specification : Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route) C Nonestab
10) Catch Magazine for JVPC 5 56 30MM 0204 03 04 02 14 014 00DA MIM Route[70]() Specification : Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route) C Nonestab
11) Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route[70]() Specification : Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route C Nonestab
12) Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA[70]() Specification : Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA C Nonestab
13) Screw Axis Rear Sight DRG No0204 03 04 00 01 004 00DA for JVPC 5 56mm through MIM Route[70]() Specification : Screw Axis Rear Sight DRG No0204 03 04 00 01 004 00DA for JVPC 5 56mm through MIM Route C Nonestab
14) Stud Cocking Handle DRG No 0204 03 04 00 01 013 00DA for JVPC 5 56mm through MIM Route[70]() Specification : Stud Cocking Handle DRG No 0204 03 04 00 01 013 00DA for JVPC 5 56mm through MIM Route C Nonestab
15) Extractor JVPC 5 56MM thorugh MIM route DRG No 0204 03 04 00 05 002 00DA[70]() Specification : Extractor JVPC 5 56MM thorugh MIM route DRG No 0204 03 04 00 05 002 00DA C Nonestab
16) Nut plain round lock fore sight DRG No 0204 03 04 00 01 009 00DA for JVPC 5 56mm through MIM route[70]() Specification : Nut plain round lock fore sight DRG No 0204 03 04 00 01 009 00DA for JVPC 5 56mm through MIM route C Nonestab
17) Sleeve Finish as per drawing no SK 6502 TE Through MIM Route[70]() Specification : Sleeve Finish as per drawing no SK 6502 TE Through MIM Route C Nonestab
Category :
Grade : Grade III
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) Cap Spring Return to Drg. No. CTM-0125/1 TO 6 IN F/C[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) CATCH MAGAZINE TO DRG. NO. CTM-0116M IN F/C[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) LEVER SEAR TO DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL[70]() Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 " PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION.[70]() Specification : AS PER DRG & SPECIFICATION C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF REAR SIGHT LEAF[70]() Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K 2025 C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1111 C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]() Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]() Specification : AS PER DRG. NO. K 2012 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SEAR TO DRG NO.29P 0060*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) IC CROSS BOLT HOOK LATCH AS PER DRG NO K IC 4004[70]() Specification : AS PER DRG NO: K-IC-4004 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) IC RETAINER AS PER DRG NO K IC 2091[70]() Specification : AS PER DRG NO: K-IC-2091. (LF.No.7024020910) C Nonestab
Category : p
Grade : Grade I
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO K IC 4007[70]() Specification : IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007 C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle C Nonestab
2) SEAR TO DRG NO.29P 0060*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle C Nonestab
3) BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle C Nonestab
4) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle[70]() Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle C Nonestab
Category : p
Grade : Grade II
Size : L
1) Field Gun Factory Kanpur
Name Specification Use Status
1) HAMMER AS PER DRG NO SK 02050[70]() Specification : HAMMER AS PER DRG NO SK 02050 C Estab
2) TRIGGER AS PER DRG NO SK 02045[70]() Specification : TRIGGER AS PER DRG NO SK 02045 E Estab
3) STOP SAFETY AS PER DRG NO SK 02051[70]() Specification : STOP SAFETY AS PER DRG NO SK 02051 E Estab
4) SAFETY AS PER DRG NO SK 02053[70]() Specification : SAFETY AS PER DRG NO SK 02053 E Estab
5) CATCH HAMMER AS PER DRG NO SK 02056[70]() Specification : CATCH HAMMER AS PER DRG NO SK 02056 R Estab
6) PAWL AS PER DRG NO SK 02046[70]() Specification : PAWL AS PER DRG NO SK 02046 E Estab
7) CATCH BARREL AS PER DRG NO SK 02057[70]() Specification : CATCH BARREL AS PER DRG NO SK 02057 E Estab
8) LEVER EXTRACTOR AS PER DRG NO SK 02054[70]() Specification : LEVER EXTRACTOR AS PER DRG NO SK 02054 E Estab
9) EXTRACTOR AS PER DRG NO SK 02047[70]() Specification : EXTRACTOR AS PER DRG NO SK 02047 E Estab
10) SHIELD AS PER DRG NO SK 02048[70]() Specification : SHIELD AS PER DRG NO SK 02048 E Estab
11) CATCH TRIGGER AS PER DRG NO SK 02055[70]() Specification : CATCH TRIGGER AS PER DRG NO SK 02055 E Estab
12) CAM CYLINDER AS PER DRG NO SK 02049[70]() Specification : CAM CYLINDER AS PER DRG NO SK 02049 E Estab
13) SWIVEL HAMMER AS PER DRG NO SK 02052[70]() Specification : SWIVEL HAMMER AS PER DRG NO SK 02052 E Estab
Category :
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) EXTRACTOR MIM FOR 7.62MM ASSAULT RIFLE GHAATAK[70]() Specification : EXTRACTOR (MIM) OF 7.62MM ASSAULT RIFLE GHAATAK AS PER RFI SK NO. 10226 C Nonestab
Category : p
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) SEAR SAFETY THROUGH MIM ROUTE FOREXCALIBUR INSAS 1C AND GHATAK[70]() Specification : SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK C Nonestab
Category : p
Grade : Grade III
Size : L
1) Rifle Factory Ishapur
Name Specification Use Status
1) PLUNGER MULTI APPLICATION HOD. (MIM ROUTE) FOR RIFLE 5.56MM INSAS [70]() Specification : FINISH COMPT. OF PLUNGER MULTI APPLICATION (HOD) DS CAT NO.1005-007788 (LATEST DC-24636-SA DT.17-2-2000) FOR RIFLE 5.56MM INSAS C Nonestab
2) TRIGGER (FINISH) (THROUGH MIM ROUTE) FOR PISTOL AUTO 9MM 1A.[70]() Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A. C Nonestab
3) EXTRACTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS[70]() Specification : EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN C Nonestab
4) LINK HAMMER FOR PISTOL AUTO 9MM 1A.[70]() Specification : LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 C Nonestab
5) HAMMER MK-2 (THROUGH MIM ROUTE) FOR PISTOL 9MM AUTO 1A.[70]() Specification : HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1 C Nonestab
6) CATCH MAGAZINE (THROUGH MIM ROUTE) FINISH FOR 9MM AUTO PISTOL 1A.[70]() Specification : DA CAT NO 1005-003148 IS:3748-1990 DESIGNATION 75. T-6 C Nonestab
7) SEAR FOR 9MM AUTO PISTOL 1A.[70]() Specification : DS CAT NO. 1005-003172 IS:3748 : 1990 DESIGNATION 75 T-6 C Nonestab
8) LEVER TRIPPING (THROUGH MIM ROUTE) FOR 9MM AUTO PISTOL[70]() Specification : LEVER TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122 FOR 9MM AUTO PISTOL C Nonestab
9) GAS REGULATOR (THROUGH MIM ROUTE) FOR RIFLE 5.56MM.INSAS[70]() Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II). C Nonestab
10) WHEEL LOCK FOR RIFLE 5.56MM INSAS [79]() Specification : WHEEL LOCK TO DSCAT NO.1005-560045 (DC-26554-SA)FOR RIFLE 5.56MM INSAS. C Nonestab
11) TRIGGER FINISH (THROUGH MIM ROUTE) (FROM TRADE FINISH).FOR 0.32 PISTOL [70]() Specification : TRIGGER FINISH TO DRG NO.PS32-112(FROM TRADE FINISH).FOR 0.32" PISTOL C Nonestab
12) F/COMPT EJECTOR SMALL ARMS CARTRIDGE (THROUGH MIM ROUTE) FOR RIFLE 5.56MM INSAS [79]() Specification : F/COMPT EJECTOR SMALL ARMS CARTRIDGE DRG.NO.2689/1,SHT-5 TODS CAT NO.1005-007905(DC-26518-SA)THROUGH MIM ROUTE FOR RIFLE 5.56MM INSAS.MACRO ETCH TEST TO CONFORM ASTM381-84STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE 2.NMIR TEST AS PER IS4163-82WI C Nonestab
13) F/COMPT RETAINER (THROUGH MIM ROUTE) FOR RIFLE 5.56MM INSAS [79]() Specification : F/COMPT RETAINER TO D.S.CAT NO.1005-007824(DC-24129-SA)MIM ROUTE FOR RIFLE 5.56MM INSAS C Nonestab
14) F/COMPT LEVER CHANGE (THROUGH MIM ROUTE) FOR RIFLE 5.56MM INSAS [79]() Specification : F/COMPT LEVER CHANGE TO D.S.CAT NO.1005-007811(DC-26553-SA)THROUGH MIM ROUTE FOR RIFLE 5.56MM INSAS C Nonestab
Category : p
Grade : Grade III
Size : L
1) Heavy Vehicle Factory
Name Specification Use Status
1) EOI NO 125MMEPQ18000065 MANUFACTURING AND SUPPLY OF INVESTMENT CASTINGS REQUIRED FOR ARMOURED VEHICLES[02]() Specification : INVESTMENT STEEL CASTING R Nonestab
Category : p
Grade : Grade II
Size : L
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) EXTRACTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE / Alt Material DS.CAT.NO. 26923-SA DATED-29.08.2016. Description : EXTRACTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE / Alt Material DS.CAT.NO. 26923-SA DATED-29.08.2016.() Specification : DS.CAT.NO. 26923-SA DATED-29.08.2016. C Estab
2) EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT NO 1005 007905 FOR INSAS 5 56MM Description : EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT NO 1005 007905 FOR INSAS 5 56MM() Specification : EJECTOR SMALLARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16 C Estab
3) Wheel Rear Sight for JVPC through MIM Route Description : Wheel Rear Sight for JVPC through MIM Route() Specification : Wheel Rear Sight DRG No. 0204 03 02 00 01 002 00DD for JVPC 5.56MM (MIM Route) C Estab
4) Screw Axis Rear Sight through MIM route for JVPC Description : Screw Axis Rear Sight through MIM route for JVPC() Specification : Screw Axis Rear Sight through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODC Item Code 7012470172 C Estab
5) FORE SIGHT FOR JVPC Description : FORE SIGHT FOR JVPC() Specification : FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA C Estab
6) Rear sight for JVPC through MIM Route Description : Rear sight for JVPC through MIM Route() Specification : Rear sight Drg no. 0204 03 02 00 01 005 00DD for JVPC 5.56MM (MIM Route) C Estab
7) STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE Description : STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE() Specification : Stud Cocking Handle DRG No. 0204 03 02 00 -01-004-00DC for JVPC 5.56 MM (MIM Route) C Estab
8) Slide Cocking Handle through MIM route for JVPC Description : Slide Cocking Handle through MIM route for JVPC() Specification : Slide Cocking Handle DRG No. 0204 03 02 00 01 003 00DE for JVPC 5.56 (MIM Route) C Estab
9) Nut Plain Round Lock Fore Sight through MIM Route for JVPC Description : Nut Plain Round Lock Fore Sight through MIM Route for JVPC() Specification : Nut Plain Round Lock Fore Sight DRG No. 0204 03 02 00 01 011 00DA for JVPC 5.56 MM (MIM Route) C Estab
10) HOLDING OPENING DEVICE HOD FOR JVPC MIM ROUTE Description : HOLDING OPENING DEVICE HOD FOR JVPC MIM ROUTE() Specification : DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM C Estab
11) Housing Lever Catch Magazine for JVPC through MIM ROUTE Description : Housing Lever Catch Magazine for JVPC through MIM ROUTE() Specification : Housing Lever Catch Magazine DRG No. 0204 03 02 18 29 002 for JVPC 5.56 for JVPC 5.56 (MIM Route) C Estab
12) Housing Plunger through MIM Route for JVPC Description : Housing Plunger through MIM Route for JVPC() Specification : Housing Plunger DRG NO. 0204 03 02 18 29 004 00DF for JVPC 5.56 MM (MIM Route) C Estab
13) Trigger Front through MIM route for JVPC Description : Trigger Front through MIM route for JVPC() Specification : Trigger Front through MIM route for JVPC as per Drg No 0204 03 02 02 18 001 OODC Item Code 7012470183 C Estab
14) Plunger Wheel Lock for JVPC MIM Route Description : Plunger Wheel Lock for JVPC MIM Route() Specification : Plunger Wheel Lock DRG No. 0204 03 02 02 18 006 00DF for JVPC 5.56MM (MIM Route) C Estab
15) Wheel Lock through MIM route for JVPC Description : Wheel Lock through MIM route for JVPC() Specification : Wheel Lock through MIM route for JVPC as per Drg No 0204 03 02 02 18 007 OODC Item Code 7012470185 C Estab
16) Sear Safety through MIM route for JVPC Description : Sear Safety through MIM route for JVPC() Specification : Sear Safety Drg No. 0204 03 02 02 18 008 00DD FOR JVPC5.56MM (MIM Route) C Estab
17) LEVER CATCH MAGAZINE FOR JVPC through MIM ROUTE Description : LEVER CATCH MAGAZINE FOR JVPC through MIM ROUTE() Specification : DRG NO. 0204 03 02 02 18 018 00DE FOR JVPC 5.56MM C Estab
18) Stud Change Lever for JVPC Description : Stud Change Lever for JVPC() Specification : Stud Change Lever Drg. No. 0204 03 02 02 20 001 OODC for JVPC 5.56 MM (MIM ROUTE) C Estab
19) LEVER STUD CHANGE RIGHT for JVPC MM through MIM route Description : LEVER STUD CHANGE RIGHT for JVPC MM through MIM route() Specification : DRG No. 0204 03 02 00 02 001 00DE C Estab
20) Lever Stud Change Left for JVPC through MIM ROUTE Description : Lever Stud Change Left for JVPC through MIM ROUTE() Specification : Lever Stud Change Left DRG No. 0204 03 02 02 20 002 00DD for JVPC 5.56 (MIM Route) C Estab
21) GUIDE PLUNGER BUTT LOCK through MIM Route for JVPC Description : GUIDE PLUNGER BUTT LOCK through MIM Route for JVPC() Specification : Guide Plunger Butt Lock DRG No. 0204 03 02 03 22 002 00DD for JVPC 5.56 MM (MIM Route) C Estab
22) Plunger Butt Lock for JVPC Description : Plunger Butt Lock for JVPC() Specification : DRG No. 0204 03 02 04 14 001 for JVPC 5.56MM (MIM Route) C Estab
23) SLIDER BREECH BLOCK for JVPC Description : SLIDER BREECH BLOCK for JVPC() Specification : DRG NO. 0204 03 03 00 00 001 00DD FOR JVPC 5.56MM C Estab
24) EXTRACTOR JVPC 5.56MM THROUGH MIM / Alt Material ROUTE DRG.NO.0204 03 02 00 00 004 00DA Description : EXTRACTOR JVPC 5.56MM THROUGH MIM / Alt Material ROUTE DRG.NO.0204 03 02 00 00 004 00DA() Specification : DRG.NO.0204 03 02 00 00 004 00DA C Estab
25) Sight Leaf for JVPC through MIM Route Description : Sight Leaf for JVPC through MIM Route() Specification : Sight Leaf for JVPC 5.56 MM through MIM Route DRG No. 0204 03 02 00 01 008 00DB C Estab
26) Piece Guide for JVPC through MIM Route Description : Piece Guide for JVPC through MIM Route() Specification : Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 02 38 40 002 00DD C Estab
27) PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO. 0204 03 03 02 36 003 00DA Description : PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO. 0204 03 03 02 36 003 00DA() Specification : DRG.NO. 0204 03 03 02 36 003 00DA R Estab
28) Stopper Front Spring Recoil for JVPC through MIM route Description : Stopper Front Spring Recoil for JVPC through MIM route() Specification : Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB C Estab
29) Catch Barrel for Revolver . 32' Through MIM process Description : Catch Barrel for Revolver . 32' Through MIM process() Specification : DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT) C Estab
30) TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER THROUGH MIM ROUTE Description : TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER THROUGH MIM ROUTE() Specification : TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-1 ALT D.A. NO. 05/18 DT 07.03.2018. THROUGH MIM ROUTE. C Estab
31) STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06 Description : STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06() Specification : DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD() Specification : AS PER DRG. C Estab
2) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD() Specification : AS PER DRG. C Estab
2) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD() Specification : AS PER DRG. C Estab
2) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Estab
Category : p
Grade : 3
Size : S
1922 THAIYAL NAYAGI TEXTILES
9/579-A, PERIYAR NAGAR, ELAVAMALAI - POST, ERODE DISTRICT, TAMILNADU PERIYAR NAGAR, ELAVAMALAI ERODE Tamil Nadu
PIN1 : 638316
Phone No. : 2230176 		AEUPV4003N

Download 		1) Cordite Factory Arvankadu
Name Specification Use Status
1) CLOTH COTTON DOWN TIGHT, COLOUR SIGNAL RED & WHITE, IND/ME/1005(Prov)() IND/ME/1005(Prov)
Category : DP
Grade : I,II
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) CAMBRIC COTTON 762MM WIDE NO() Specification : IS:5088-1982(1ST REVISION)WITH AMENDMENT NO 2 EXCEPT (1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2)(1) MASS PER SQ.MTR WHICH SHOULD BE 58 TO 65 GMS AND (2) NOT EXCEED 0.5% WHEN DETERMINED AS PER SPECN IS- 1967-1961". R Estab
Category : p
Grade : 3
Size : S
1923 TEXPLAS (INDIA) PVT. LTD.
BHEL Industrial Estate Ranipur Haridwar Uttarakhand
PIN1 : 249403
Phone No. : 308604
GSTIN : 05AAACT8750H1ZA 		MRTT00303C

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Wear Additive Liner, Specn -0808346 Dtd 15.12.86 (Bofors Drg No519184 dc No 34720 -A dtd-28.9.89() Specn -0808346 Dtd 15.12.86 (Bofors Drg No519184 dc No 34720 -A dtd-28.9.89
Category : DDP,DP
Grade : I
Size : M
1) Cordite Factory Arvankadu
Name Specification Use Status
1) WEAR ADDITIVE LINER[14]() Specification : AS PER REQUIRED DRAWING/SPECN R Estab
Category : DP
Grade : I
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6270603200 ADDITIVE LINER IRW 162 (130MM FVC) Description : 6270603200 ADDITIVE LINER IRW 162 (130MM FVC)() Specification : SPECN. NO. CQA (A) 0303 C Estab
2) 6191700018 BRAKE RING BIG FOR PINAKA ROCKET Description : 6191700018 BRAKE RING BIG FOR PINAKA ROCKET() Specification : BRAKE RING (BIG) FOR PINAKA ROCKET TO ARDE DRG. NO. 8603 03 99 00 00 002 00DA & QAP NO. ARDE/PINAKA/PNWH/QAP/011 C Estab
Category : p
Grade : 3
Size : S
1924 Amphenol Interconnect India
105, Bhosari Bhosari Industrial Area, Pune Maharashtra
PIN1 : 411026
Phone No. : 673603
GSTIN : 27AACCA3419J1ZS 		AACCA3419J

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B Description : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B() Specification : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF 1 WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B C Estab
Category : dp
Grade : 3
Size : S
1925 CYRONICS INSTRUMENTS PVT LTD
NO 11, ELECTRONIC CO OPERATIVE ESTATE, PUNE SATARA ROAD, PUNE NO 11, ELECTRONIC CO OPERATIVE ESTATE, PUNE SATARA ROAD, PUNE PUNE MAHARASHTRA
PIN1 : 411009
Phone No. : 9922998220 		AABCC7086J

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B Description : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B() Specification : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF 1 WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B C Estab
Category : dp
Grade : 3
Size : S
1926 SHRI NAVKAR METALS LIMITED
C/1/515, GIDC - ODHAV ROAD NO. 39, AHMEDABAD Gujarat
PIN1 : 382415
Phone No. : 22875515
GSTIN : 24AACCS0902Q1ZC 		NOTAP1234P

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Aluminium Container SER[25]() Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020. R Nonestab
Category :
Grade : Grade III
Size : S
1927 Anupam Enterprise
113, Park Street Poddar Point, Block-B, Room No.: 502 Park Street Kolkata West Bengal
PIN1 : 700016
Phone No. : 9830063651
GSTIN : 19ABPFA9137J1ZT 		CALA27160A

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) READY MIXED WHITE PAINT IS 168 1993 L F NO 1011308002[10]() Specification : PAINT R.M. AIR DRYING SEMI GLOSSY FINISH WHITE BRUSHING TO = SPECN:IS:168-1993 SECOND REVISION WITH AMENDMENT NO 1&2 {AS APPLICABLE FOR DEFENCE USE. P Nonestab
2) PAINT TURQUOISE BLUE L F NO 1011308102[10]() Specification : PAINT R.M.AIR DRYING MATT.BRUSHING TURQUOISE BLUE ISC.NO-102 OF IS-5-2007 TO SPECN.IS-168-1993 THIRD REVISION {AS APPLICABLE FOR DEFENCE USE}.FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE BY OFM P Nonestab
3) PAINT RMADS GL GREEN BRUNSWICK L F NO 1011312225[10]() Specification : PAINT READY MIXED AIR DRYING SEMI GLOSSY FOR GENERAL PURPOSE GREEN BRUNSWICK LIGHT ISC-225 OF IS-5-2007 SPRAYING TO SPECN.IS-168-1993 (AS APPLICABLE FOR DEFENCE USE). P Nonestab
4) R M PAINT DEEP BRONZE GREEN L F NO 1011508224[10]() Specification : READY MIXED PAINT AIR DRYING MATT.BRUSHING{ISC224 IS:5-2007 DEEP BRONZE GREEN}TO SPECN.IS-168-1993 [AS APPLICABLE FOR DEFENCE USE]. FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE PROVIDED BY OFM P Nonestab
5) PAINT RMAD BUFF MIDDLE SPRAYIN L F NO 1011517359[10]() Specification : PAINT R.M AIR DRYING SEMI GLOSSY FINISH ISC-359 OF IS-5 2007 BUFF MIDDLE SPRAYING TO SPECN IS-168-1993 [IIIrd REVISION ADDITIONAL REQUIREMENTS TO IS-168-1993 AS APPLICABLE FOR DEFENCE USE,VISCOSITY OF PAINT SHOULD BE SUITABLE FOR USE WIT P Nonestab
6) PAINT RED OXIDE IS 2074 1992 L F NO 1011700446[10]() Specification : READY MIXED PAINT AIR DRYING RED OXIDE ZINC CHROME PRIMING TO SPECN.IS:2074-1992. R Nonestab
Category :
Grade : Grade III
Size : S
1928 CENTRAL TOOL ROOM & TRAINING CENTRE
Bonhooghly Industrial Area Bonhooghly Industrial Area KOLKATA West Bengal
PIN1 : 700108
Phone No. : 0332577635 		AAAAC2480P

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING Description : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING() Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING C Estab
Category : p
Grade : 3
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT Description : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Estab
Category : p
Grade : 3
Size : S
1929 TE CONNECTIVITY INDIA PVT LTD
TE PARK # 22B Doddenakundi 2nd Phase , Industrial Area, BANGALORE Karnataka
PIN1 : 560048
Phone No. : 8308303228
GSTIN : 29AABCT7374C1Z7 		AABCT7374C

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B Description : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B() Specification : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF 1 WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B C Estab
Category : dp
Grade : 3
Size : S
1930 MAITY ENTERPRISE
AMRITA LAL DAWN ROAD BARANAGAR,ALAMBAZAR KOLKATA West Bengal
PIN1 : 700035
Phone No. : 9339356733
GSTIN : 19AHNPM5667K1ZH 		AHNPM5667K

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING[91]() Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING C Nonestab
2) MACHINING AND PROCESSING OF AL ROD 22 MM DIA TO PRODUCE CASE IN FINISHED CONDITION TO DRG PT NO IQX 318 WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF AL ROD 22 MM DIA +0.25 MM TO PRODUCE "CASE" IN FINISHED CONDITION TO DRG PT NO IQX-318 (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE RUDRA[63]() Specification : STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE-RUDRA C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010[63]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Machining of AL Alloy Rod to produce ADAPTER Nut as per drg no 4 025998 Det No 075 in FC for 125mm HEAT Without surface coating painting operation[91]() Specification : Machining of AL Alloy Rod (I/Code-0611601060) to produce ADAPTER Nut as per drg. no. 4-025998 Det. No. 075 in F/C for 125mm HEAT. Without surface coating/painting operation R Nonestab
2) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 022 in FC for 125mm HEAT[91]() Specification : Machining of Copper Tube (Item Code-070855832) to produce Obturating Band as per drg. no. 4-025998 Det. No. 022 in F/C for 125mm HEAT. C Nonestab
3) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 095 in FC for 125mm HEAT[91]() Specification : Machining of Copper Tube (Item Code-070855831) to produce Obturating Band as per drg. no. 4-025998 Det. No. 095 in F/C for 125mm HEAT. R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]() Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE RUDRA[63]() Specification : STRIP STRIKER FOR FUZE ISD 30 MM HE GRANADE-RUDRA C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS 970 PT 1 1983 FOR CONVERSION IN CONTACT TO DRG 4 025998 059 TO SKETCH NO OTF S 011 BEFORE TIN PLATING OPERATION INPUT MATERIAL IC 0142007013 IC 9140070998[91]() Specification : Machining of 13mm Dia Rod Grade 080M36 OR 080M40 in Nor H condition to BS:970 PT-1-1983 FOR CONVERSION IN CONTACT TO DRG. 4-025998 059 (TO SKETCH NO. OTF/S/011) BEFORE TIN PLATING OPERATION (INPUT MATERIAL I/C:0142007013) (IC:9140070998) R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) TUBE BLANK TO DRG NO OTF S 006 FOR 125 mm HEAT SHELL[63]() Specification : TUBE BLANK FOR SK. NO. OTF/S/006/1B FOR 125 mm HEAT SHELL R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E[61]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]() Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) RETAINER TO DRG NO 9002 00 01 00 00 003 00TA IN FINISH CONDITION[62]() Specification : RETAINER TO DRG. NO. 9002-00-01-00-00-003-00TA IN F/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) NUT TO DET NO 2 16 OF DRG NO 3 024045 IN FC TO SK NO OTF DD 006[64]() Specification : R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) CAP TO SK NO OTF PG 002 IN FC[62]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) NUT IN FC TO SK NO OTF PG 003[64]() Specification : AS PER DRG C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]() Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT C Nonestab
2) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]() Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505B (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380) R Nonestab
3) MACHINING AND PROCESSING OF BODY FOR 76 POINT 2 MM PRE FRAG GSF SK M 7921 A[91]() Specification : MACHINING AND PROCESSING OF BODY FOR 76.2 MM PRE FRAG GSF SK M-7921 A C Nonestab
4) SET OF TRACER NUT AXLE PIN SEMI RING[62]() Specification : SET OF TRACER NUT TO (DRG. NO. 4-025998-036), AXLE PIN TO (DRG. NO. 4-025998-025), SEMI RING TO DRG NO (4-025998-076), ( 1 SET+ CONSIST OF AXLE PIN 06 NOS, TRACER NUT 01 NO, SEMI RING 2 NOS,) FOR STABILIZER OF 125 MM HEAT C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BLANK FOR DISTANCE TUBE TO OFAJ DRG NO CC 533 C[62]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SEMI MACHINED BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H AND PERIPHERAL GRAIN GROWTH 1MM MAX ON RADIUS[63]() Specification : SEMI-MACHINED "BLANKS FOR ILLUMINATING TIME FUZE BODY TO OFAJ DRG NO CG 27 H & PERIPHERAL GRAIN GROWTH 1MM (MAX) ON RADIUS" C Nonestab
2) FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO DC 154 D PGG[63]() Specification : FORGING BLANKS FOR TIME TRAIN RING TO OFAJ DRG NO. DC-154 D PGG 1.8MM (MAX) ON RADIUS C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709[63]() Specification : BRASS PRESSING BLANKS TO DRG.NO.1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG.NO.QX-1709, P Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]() Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922) C Nonestab
2) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505B UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]() Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505B (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380) R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]() Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SAFETY CAP TO DRG NO IQX 14 IN FC WITHOUT PAINTING AND PASSIVATION FOR FUZE 162 MK 9[63]() Specification : SAFETY CAP TO DRG. NO. IQX-14 IN F/C WITHOUT PAINTING AND PASSIVATION TO DRG IAFD-44 PT NO. IQX-14DC 35445-A DT 05.02.93 FOR FUZE 162 MK-9 C Nonestab
2) SAFETY CAP IN FC MC WITHOUT PAINTING AND PASSIVATION TO DRG NO IAFD 44 PT NO IQX 14 FOR FUZE 162 MK 8[63]() Specification : SAFETY CAP IN F/C MC WITHOUT PAINTING AND PASSIVATION TO DRG. NO. IAFD-44 PT. NO. IQX-14 DC 35445-A DT 05-02-93 FOR FUZE 162 MK 8 C Nonestab
Category :
Grade : Grade III
Size : S
1931 SRI CHANDRA INDUSTRIES
Plot No.44, Sy.No.451 Shakti Peetam, Prashanthi Nagar I.E., Kukatpally, Hyderabad Telangana
PIN1 : 500072
Phone No. : 23074472
GSTIN : 36BDUPS4210A1ZN 		HYDS19143F

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) RUBBER BUFFER TO PART NO 5177384[90]() Specification : RUBBER BUFFER TO PART NO.5177384 C Nonestab
Category :
Grade : Grade III
Size : S
1932 RAR Engineering Private Limited
114, new rajdhani enclave, Vikas Marg Delhi Delhi
PIN1 : 110092
Phone No. : 3568967
GSTIN : 07AAJCR7969K1ZH 		AAJCR7969K

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9081001430 SHOCK ABSORBER ART NO 5187184[90]() Specification : SHOCK ABSORBER ART NO 5187184 (67DP-13183-010 TAYLOR 1-1/4X2 SHOCK ABSORBER C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SHOCK ABSORBER TO PART NO 6298889[90]() Specification : SHOCK ABSORBER TO PART NO.6298889 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9081002381 SHOCK CARTIDGE TO ART NO 5187179[90]() Specification : AS PER GIVEN SPECIFICATION/DRG C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) DESIGN DEVELOPMENT MANUFACTURING AND SUPPLY OF PNEUMATIC SUSPENSION CONTROL SYSTEM FOR AIR DEFENCE GUN AS PER SCOPE OF WORK[90]() Specification : DESIGN, DEVELOPMENT, MANUFACTURING AND SUPPLY OF PNEUMATIC SUSPENSION CONTROL SYSTEM FOR AIR DEFENCE GUN AS PER SCOPE OF WORK. C Nonestab
Category :
Grade : Grade III
Size : S
1933 POLYMIX INDIA
7/H/11 SEAL LANE KOLKATA 700015 7/H/11 SEAL LANE KOLKATA 700015 KOLKATA West Bengal
PIN1 : 700015
Phone No. : 9748527198
GSTIN : 19CIMPP3883N1Z6 		CIMPP3883N

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]() Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922) C Nonestab
Category :
Grade : Grade III
Size : SS
1934 shree ganesh elastomers
c/4 shubhlaxmi ind estate opp laxmi ice factory tavdipura shahibaug ahmedabad SHAHIBAG ahmedabad Gujarat
PIN1 : 382424
Phone No. : 9327647970
GSTIN : 24ACXFS9380A1ZO 		ACXFS9380A

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9080079689 PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038[90]() Specification : PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038 C Nonestab
2) 9080079690 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037[90]() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037 C Nonestab
3) 9080079691 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039[90]() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039 C Nonestab
4) 9080079692 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040[90]() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040 C Nonestab
5) 9080079695 PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4[90]() Specification : PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4 C Nonestab
Category : p
Grade : 3
Size : S
1935 TIRUPATI INDUSTRIES PROP. TIRUPATI COMPONENTS PVT. LTD.
3/1, RAM SARAN PODDAR LANE RAM SARAN PODDAR LANE KOLKATA West Bengal
PIN1 : 700053
Phone No. : 24002082
GSTIN : 19AAACT9221B1ZL 		CALT02282A

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]() Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922) C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) Machining of AL Alloy Rod to produce ADAPTER Nut as per drg no 4 025998 Det No 075 in FC for 125mm HEAT Without surface coating painting operation[91]() Specification : Machining of AL Alloy Rod (I/Code-0611601060) to produce ADAPTER Nut as per drg. no. 4-025998 Det. No. 075 in F/C for 125mm HEAT. Without surface coating/painting operation R Nonestab
2) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 022 in FC for 125mm HEAT[91]() Specification : Machining of Copper Tube (Item Code-070855832) to produce Obturating Band as per drg. no. 4-025998 Det. No. 022 in F/C for 125mm HEAT. C Nonestab
3) Machining of Copper Tube to produce Obturating Band as per drg no 4 025998 Det No 095 in FC for 125mm HEAT[91]() Specification : Machining of Copper Tube (Item Code-070855831) to produce Obturating Band as per drg. no. 4-025998 Det. No. 095 in F/C for 125mm HEAT. R Nonestab
Category :
Grade : Grade III
Size : S
1936 Neometrix Engineering Private Limited
E148 Sector63 NOIDA UP 201301 E148 Sector63 NOIDA UP 201301 Gautam Budh Nagar Uttar Pradesh
PIN1 : 201301
Phone No. : 4500800
GSTIN : 09AACCN2254N1Z6 		DELN08052C

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9073200041 CHARGING VALVE ASSY TO DRG NO 2A46M C607 10C6[90]() Specification : CHARGING VALVE ASSY TO DRG.NO.2A46M.C607-10C6. C Nonestab
Category :
Grade : Grade III
Size : S
1937 Precision Machinekraft Private Limited
11/2 Lakshmipura main road Lakshmipura Main Road Bangalore Karnataka
PIN1 : 560090
Phone No. : 9674254125
GSTIN : 29AABCP6917D1ZE 		CALPO6249F

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9081005275 WIRE RACE ROLLER BEARING MAKE ROTHE ERDE DORTMUND[90]() Specification : WIRE RACE ROLLER BEARING, MAKE ROTHE TO DRG. NO. 3054115 C Nonestab
2) 9073200049 BEARING TO DRG NO 74716 KETY 500 AS PER G SCHEDULE SGT NO 7[90]() Specification : BEARING TO DRG NO.74716 KETY 500.AS PER G SCHEDULE SGT NO.7) C Nonestab
Category :
Grade : Grade III
Size : S
1938 SWITCHGEARS & STRUCTURALS(INDIA) PVT LTD
Plot No..132 & 133, Phase V,I.D.A,Jeedimetla,Hyderabad Phase V,I.D.A. Jeedimetla Hyderabad Telangana
PIN1 : 500055
Phone No. : 23193379
GSTIN : 36AADCS7818Q1ZL 		HYDS02561G

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9081002381 SHOCK CARTIDGE TO ART NO 5187179[90]() Specification : AS PER GIVEN SPECIFICATION/DRG C Nonestab
2) 9073200041 CHARGING VALVE ASSY TO DRG NO 2A46M C607 10C6[90]() Specification : CHARGING VALVE ASSY TO DRG.NO.2A46M.C607-10C6. C Nonestab
Category :
Grade : Grade III
Size : M
1939 Switchgear Manufacturing Company Pvt. Ltd.
Plot No:9, ULD II, Gandrajupalli Gangavaram Madal, Chitoor Dist. Andhra Pradeesh Industrial Park Gandrajupalli Andhra Pradesh
PIN1 : 517432
Phone No. : 9100033679
GSTIN : 37AASCS6238D2ZY 		AASCS6238D

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9081002381 SHOCK CARTIDGE TO ART NO 5187179[90]() Specification : AS PER GIVEN SPECIFICATION/DRG C Nonestab
2) 9073200041 CHARGING VALVE ASSY TO DRG NO 2A46M C607 10C6[90]() Specification : CHARGING VALVE ASSY TO DRG.NO.2A46M.C607-10C6. C Nonestab
Category :
Grade : Grade III
Size : S
1940 Dynamics Corproation
3 hashim bldg , 1st floor , fort 40 veer nariman road mumbai Maharashtra
PIN1 : 400001
Phone No. : 22871429
GSTIN : 27AAAFD2724L1ZJ 		278501980V

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]() Specification : BUFFER ASSY.TO DRG.1133736/5163822 C Nonestab
2) 9081005152 RUBBER BUFFER TO PART NO 5177384[90]() Specification : RUBBER BUFFER TO PART NO 5177384 C Nonestab
Category :
Grade : Grade III
Size : S