List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1821 PRICOL ENGG IND LTD
128 OOTY MAIN ROAD PERAINAICKENPALAYAM COIMBATORE Tamil Nadu
PIN1 : 641020
Phone No. : 4269112
GSTIN : 33AABCP8787H1Z1 		CMBP04012B

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) DRIVER INFORMATION AND WARNING SYSTEM FOR TANK T90 TO 6201000922[62]() Specification : DRIVER INFORMATION AND WARNING SYSTEM FOR TANK T-90 TO SPEC. NO. HVF/T-90/IRD/DIWS/SPEC/311 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) MEMORY UNIT() DRG.NO.172.74.001CB-3 C Not Estab.
2) CONTROL UNIT BYF-2 () DRG.NO.BYF2.000TY C Not Estab.
3) ELECTROMECHANICAL DEVICES() CODE 70 & 71 C Not Estab.
4) CABLES() CODE 70 & 71 C Not Estab.
5) SMOKE GENERATING SYSTEM() CODE 37 C Not Estab.
Category : P
Grade : II
Size : M
1822 Padamchand Milapchand Jain
10/237/D/6,Behind sakharpe Hospital Behind sakharpe Hospital Ichalkaranji Maharashtra
PIN1 : 416115
Phone No. : 2435478
GSTIN : 27ABAPJ6674L1Z9 		ABAPJ6674L

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) Cloth Duck Rip Stop Cotton 610 gms. OG WP 91 cms. wide[21]() Specification : IND/TC/0145 R Estab
2) CLOTH DRILL COTTON WHITE BLEACHED 142 CM V.NO 3[21]() Specification : IS:177-1989 V.NO.3 R Estab
3) CLOTH DUCK COTTON 610 GRM O.G. W.P. 91 CMS. WIDE[21]() Specification : IS:1422-1983 (V.NO.2), REAFF. 2000 WITH AMDT. NO. 1 OF APR., 87, AMDT. NO. 2 R Estab
4) CLOTH DUCK COTTON 745 GMS. O.G. W.P. 91 CMS.[21]() Specification : IS:1422-1983 (V.NO.1) AND WATER PROOFNESS TO IS:6803-1972 R Estab
5) CLOTH DRILL COTTON O.G. 142 CMS.[21]() Specification : IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Estab
6) CLOTH DUCK O.G. RIP STOP 50:50 POLYSTER :COTTON BLEND IN 700 GMS./SQ.MTR. W.P. R.P. 91 CMS. WIDE[21]() Specification : SUPPLY BY DMSRDE R Estab
7) CLOTH DUCK OG RIP STOP 50:50 POLYSTER:COTTON BLEND IN 400 GMS./SQ.MTR. W.P. R.P. 91 CMS. WIDE[21]() Specification : SUPPLY BY DMSRDE R Estab
8) CLOTH PLAIN WEAVE POLYESTER & COTTON KHAKI 137 CM[21]() Specification : OEFC/01/PCK/ 2003 R Estab
9) CLOTH COTTON DOSSUTI SCOURED 91 CM.[21]() Specification : IS: 179-1977 VARIETY NO. 4 R Estab
10) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.[21]() Specification : As per requirement & specification R Estab
2) CLOTH CALICO COTTON WHITE BLEACHED 91 CM.[21]() Specification : IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R Estab
3) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS[21]() Specification : IS:1422-1983 V.NO. 2 EXCEPT THAT R Estab
4) CLOTH DRILL COTTON DISRUPTIVE PATT VAT PRINTED 142 CMS. WIDE[21]() Specification : IND/TC/0044 (d) CONFORMING TO VARIETY NO. 3 R Estab
5) LINING CLOTH POLYESTER 100% BLACK 110 CMS. WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
6) CLOTH CALICO COTTON KHAKI 91 CM.[21]() Specification : IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3 R Estab
7) CLOTH DUCK COTTON 610 GMS. SCOURED W.P. R.P. 91 CMS. WIDE[21]() Specification : IS: 1422-1983 V. NO 2 WATER PROOFNESS TO IS: 6803 LATEST R Estab
8) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148CMS.[21]() Specification : PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (b) R Estab
9) CLOTH DRILL COTTON O G142 CMS[21]() Specification : AS PER SPECIFICATION R Estab
10) CLOTH DUCK POLY COTTON RIP STOP 425 GMS O G 91 CMS[21]() Specification : AS PER REQUIREMENT R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) CLOTH DRILL COTTON NAVY BLUE 142 CMS V NO 4 MINIMUM EXCLUDING SELVEDGES NHQ[21]() Specification : SPECIFICATION : IS: 177-1989 (IVTH REVISION) REAFFIRMED 2014 CONFIRMING TO V. NO.4 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Cotton Light Blue 142cms. [21]() Specification : IS:2970 Type-II R Nonestab
2) CLOTH POLYESTER & COTTON COMBINATION OF PLAIN WEAVE AND MODIFIED PLAIN WEAVE SAGE GREEN 150 CM WIDTH (MINIMUM WIDTH EXCLUDING SELVEDGES).[21]() Specification : IAFS 09149:2016 WITH AMDT NO.5. REFER ATTACHED DOCUMENT "SPECIFICATION" R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Cotton Poplin Light Blue 150 cm width excluding selvedges[21]() Specification : NO.IS:188-2004 V.NO.2 R Nonestab
2) Cloth Polyester Filament Woven Light Blue-150cm width (minimum width excluding selvedges[21]() Specification : As per Specification & Requirement R Nonestab
3) Cloth Plain Weave Polyester and Viscose Dope Dyed Dark Blue Grey 148cms width minimum excluding selvedges[21]() Specification : No.IAFS 01053:2015 with Amendment No.1 R Nonestab
4) Cloth Drill Cotton Greenish Khaki 142 cms minimum excluding selvedges[21]() Specification : NO.VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2014 R Nonestab
5) Cloth Mercerised Cotton Light OG 142 cms minimum width excluding selvedges[21]() Specification : NO.IND/TC/1201 R Nonestab
6) Cloth Plain Weave Polyester and Viscose Dope Dyed khaki 150 cm minimum width excluding selvedges[21]() Specification : NO.IND/TC/0048(g) R Nonestab
7) Cloth Polyester Filament Woven Dark Blue 150 cm width minimum width excluding selvedges[21]() Specification : CLOTH POLYESTER FILAMENT WOVEN DARK BLUE 150 CM WIDTH MINIMUM EXCLUDING SELVEDGES AS PER SPECIFICATION ATTACHED R Nonestab
8) Cloth Plain Weave Polyester and Viscose Dope Dyed Light Blue 148 cm width minimum excluding selvedges for Summer Uniform[21]() Specification : IAFS 01030 : 2015 with Amendment No.2 R Nonestab
9) Cloth Plain Weave Polyester and Cotton White 138 cms width minimum excluding selvedges[21]() Specification : No.IND/TC/0042 (f) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) FABRIC 410 GMS WP PV DOPE DYED RIP STOP 148 CMS[21]() Specification : IND/TC/2562 R Nonestab
2) FABRIC PLAIN WEAVE FLAME RETARDANT BLUE 150 CM WIDTH EXCLUDING SELVEDGES[21]() Specification : 1201908/001 R Nonestab
3) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES[21]() Specification : AS PER ENCLOSED SPECIFICATION R Nonestab
4) CLOTH Plain Weave Polyester and Cotton Grey 138 cm Width Min Excluding Selvedges[21]() Specification : IND/TC/0042/F R Nonestab
5) CLOTH DRILL COTTON KHAKI 142 CM V NO 3 MINIMUM WIDTH EXCLUDING SELVEDGES[21]() Specification : IS:177-1989 (IV REVISION) REAFFIRMED 2014 CONFIRMING TO V.NO.3 R Nonestab
6) CLOTH DRILL COTTON DARK GREY 142 CMS WIDTH EXCLUDING SELVEDGES[21]() Specification : variety no 3 of IS: 177-1989 ( FOURTH REVISION) R Nonestab
7) CLOTH NYLON COTTON 50 50 WITH CAMOUFLAGE PRINT 200 GSM[21]() Specification : PROVISIONAL SPEC NO. OCFAV/FABRIC/NYCO/001 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) DUCK NYLON 230 GM OG 91 4 CMS[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) NIV FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM PROV[2101221257]() Specification : SPECN.NO.IND/TC/2562 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC COTTON CW 310 GM OG 91 4 CMS[2101211938]() Specification : JSS: 8305-05 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM.[2101221969]() Specification : SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) R Nonestab
2) FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM[2101221970]() Specification : SPECIFICATION : ADRDE/SPECN/2002/56(b) R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) COTTON FABRIC FOR SD PARA 91point4 CM[2101462435]() Specification : COTTON FABRIC FOR S.D. PARACHUTE type II of IS:2970-1987 Reffirmed 2004 There shall be no presence of starch in appearance workmanship and finish and other respects not denined in the specification the material shall conform to the sealed R Nonestab
2) FABRIC COTTON MERCERISED 140 GM U D 136 4 CM[2101221983]() Specification : SPECN. NO. IS:514.GRADE -1. R Nonestab
3) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.[2101221592]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Nonestab
4) CANVAS NYLON 425 GM GREY WIDTH 105 CM[2101126375]() Specification : SPECN-ADRDE/SPECN/1984/23(b) R Nonestab
5) FABRIC NYLON LT WT 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 AS PER IS SPECN NO IS 5 1994 122 CM WIDTH[2101221981]() Specification : SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 R Nonestab
6) FABRIC COTTON 340 GM DUCK COTTON OG 92cm MINIMUM[2101221293]() Specification : Specification IS:1422-1983 R Nonestab
7) CANVAS COTTON 407GM LOD 105 CM[2101126365]() Specification : CANVAS COTTON 407 GM LOD IND/ADE/0087 Except That:- 1-Weight, gsm – 407+-5%. 2-Count of yarn :-Warp :-2 ply of 20s Single yarn Warp :-3 ply of 24s Single yarn (Note: The count of single yarn is approximate R Nonestab
8) BLENDED FABRIC POLYESTER AND COTTON 67 33 UNDYED FOR SUPPLY DROPPING PARACHUTES[2101221360]() Specification : Specification No. IND/TC/3038 With conditions attached as Appendix 'A' R Nonestab
9) NIV FABRIC 410 G OG WPPV DOPE DYED RIP STOP 148 CM PROV[2101221257]() Specification : SPECN.NO.IND/TC/2562 R Nonestab
10) DUCK NYLON FABRIC BLACK 230 GM[2101138893]() Specification : ADRDE/SPECN/1984/23(a) EXCEPT THE COLOUR WILL BE BLACK INSTEAD OF OG R Nonestab
11) Fabric cotton grey mercerized 95 117 gsm[2101222001]() Specification : ADRDE/QMS/TGTE/F/2019/04 dated :-17/05/2019 Except that: (i) “The roll length is specified as minimum 100 mtr.” (ii) Fabric width 94 cm. R Nonestab
12) FABRIC NYLON 190 GSM UNDYED[2101222002]() Specification : ADRDE/QMS/TGTE/F/2019/03 Dated 16/05/2019 R Nonestab
13) CLOTH COTTON DRILL WHITE VARIETY NO 3 148 CM[2101126428]() Specification : IS 177:1989, FOURTH REVISION WITH AMENDMENT NO.3 R Nonestab
14) FABRIC NYLON LT WT 37g RIP STOP WEAVE OLIVE DRAB SHADE NO 298 AS PER SPECN NO IS 5 1994 94 CM WIDTH[2101221982]() Specification : SPECIFICATION NO. IS:4726-1984. EXCEPT THAT:- i) page 4, clause 2.2.1, third line has been deleted from IS. ii) page 7, table 1, note 2 has been amended as given FOR:- 210 g/sq.cm READ:- 200 g/sq.cm R Nonestab
15) Fabric Nylon 32 Gm Undyed 107 Cm Minimum Width Excluding Selvedge[2101221287]() Specification : FABRIC NYLON 32GM U/D 107CM MINIMUM WIDTH EXCLUDING SELVEDGE ADRDE/QMS/TDTM/SPECN/95 WITH FOLLOWING NOTE:- (i) THE NYLON MULTIFILAMENT YARN WHICH IS TO BE USED TO MANUFACTURE THE FABRIC SHOULD HAVE A MINIMUM TENACITY OF 6.5GMS PER D R Nonestab
16) FABRIC NYLON 66 90 3 gm UD[2101221365]() Specification : ADRDE/QMS/TDTM/F/2013/01 (a), dtd. 03.01.2020 R Nonestab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth PC Disruptive (250 GSM) with Army Logo() PROV/OCFAV/FABRIC/001(a) R Not Estab.
2) Cloth PW PV DD Khaki 150 CM() IND/TC/0048 (f) & (g) R Not Estab.
3) Fabric 410 G WP PV DD Ripstop 148 cm() PROV/S/4369/FWP PV/RIP/TC-11/1(a) R Not Estab.
4) Fabric Green 205gms Spun PV Blended DD 148cm() PROV/S/4369/FABRIC GREEN PV/TC-11/2(a) R Not Estab.
5) Cloth PW PV DD Darker OG 150 cm() IND/TC/0048(c) & (f) R Not Estab.
6) Cloth Drill Cotton Dark Grey 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
7) Cloth Mercerised Cotton Light OG 142 CM (Minimum) Excluding Selvedges() PROV/OCFAV/Fabric/004 R Not Estab.
8) Fabric Twill Weave PC Disruptive 150 cm AL() PROV/S/2599/TC-11/2009/01 R Not Estab.
9) Cloth Twill Weave PC Disrup. 250 GSM Greenish Khaki 150 cm() PROV/S/2599/TC-11/2009/02 R Not Estab.
10) Cloth Calico Cotton White 91 cm() IS: 1544-1973 R Not Estab.
11) Cloth Mockleno Weave Polyester & Cotton Black 150 cm() Prov/OCFAV/Fabric/005 R Not Estab.
12) Cloth PC Disruptive (220 GSM) with Indian Army Logo() As per Specification & Requirement R Not Estab.
13) Cloth PC Disruptive (220 GSM) with Indian Army Logo with Colour Values() As per Specification & Requirement R Not Estab.
14) Cloth Polyester & Cotton (20:80) Greenish Khaki (250GSM) 152cm (minimum) excluding selvedges for Navy() PROV/OCFAV/FABRIC/001(a) without Disruptive Pattern R Not Estab.
15) Cloth Drill Cotton Greenish Khaki 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
16) Cloth Cotton Poplin Light Blue 150 cm() IS: 188-2004 (V.No.2) R Not Estab.
17) Cloth Drill Cotton White Bleached 142cm() VARIETY NO. 3 OF IS 177:1989 ( FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
18) Cloth Cotton Light Blue 142cm() SPECIFICATION: TYPE 2 OF IS:2970-87,REAFFFIRMED 2004 (FIRST REVISION) EXCEPT FOR AIR POROSITY. R Not Estab.
19) Cloth Shirting PV (67:33) Light Blue 148cm() IAFS 01077:2010. R Not Estab.
20) Cloth PW PC Deep Brown 150 CM() AIR HQ/DQAS/MG - 082 (REVISED 2004 ) R Not Estab.
21) Cloth PW PV DD Dark Blue Grey 148 cm() AIR HQ/DQAS/AC-053 R Not Estab.
22) Cloth PW PV DD Light Blue 148 cm() IAFS 01030:2015 R Not Estab.
23) Cloth Drill Cotton White Bleached 91 Cm() IS: 177-1989 AND (IV TH REV.)RE-AFFIR.1997,V.NO.3 R Not Estab.
Category : DDP
Grade : II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH COTTON DOSSUTIE O.G. 91 CMS WIDE[21]() Specification : IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH COTTON DOSSUTI BLUE 91 CMS[21]() Specification : IS: 179-1977 VARIETY NO. 4 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) COTTON FABRIC SCOURED FOR S.D PARCHUTE TYPE - I 91 CMS.[21]() Specification : IS: 2970-1987 (REAFF. 1999) (FIRST REV.) R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) Drill Cotton Disruptive Pattern VAT Printed Mineral khaki 142 cms[21]() Specification : IND/ME/975(Prov) R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) NYLON FABRIC 125 GMS. O.G. W.R. 91 CMS[21]() Specification : IND/TC/3020 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH COTTON DOSSUTI KHAKI 91 CMS WIDE[21]() Specification : IS :179-1977 (REAFF. 1997) EDITION 3.5 (1998-05) V.NO.4 R Estab
2) FABRIC COTTON O.G.W.R. FOR CAPS WP 91 C M[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS. WIDE[21]() Specification : IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1 R Estab
4) FABRIC COTTON 50 GM OG 100 CMS WIDE.[21]() Specification : DMSRDE/T&GS/97/415/TEX-4/3(b) R Estab
5) FABRIC COTTON SCOURED SPECIAL CHEMICALLY WATER PROOF 91.4 CM[21]() Specification : IS: 2422 VERIETY 4 R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) FABRIC COTTON DYED WATER REPELLENT 275 GSM OG 91 CMS. WIDE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) Canvas Cotton 410 gms. OG WP 91 cms.[21]() Specification : IS:1424-1983 (V.NO.4) AND WATER PROOFNESS TO IS:6803-1972 R Estab
3) Canvas Cotton 545 gms. Scoured 91 cms.[21]() Specification : IS:1424 (VARIETY NO. 3) & MODIFICATION AS PER ANNX.-A R Estab
4) LONG CLOTH RED 91 CM WIDE[21]() Specification : IS: 187-1987 (V.NO.01) R Estab
5) CANVAS COTTON 680 GM. O.G 91 CM.[21]() Specification : IS: 1424 (VARIETY NO. 2) & IS:6803 FOR WTPRF. MODIFICATION AS PER ANNX "A" R Estab
Category :
Grade : Grade III
Size : M
1) Ordnance Clothing Factory Shahjahanpur

Debarred
Name Specification Use Status
1) Cloth PW Poly Viscose Dope dyed OG 150cm [21] as sole selling agent of M/s Kanchan India Limited, Bhilwara() IND/TC/0048(g) R Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Three Layer WP Breathable Fabric Dual Shade OG White 118 cm width[21]() Specification : Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1 R Estab
2) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]() Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN. SPECIFICATION:- JSS 8305-32-2003 R Estab
3) Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width[21]() Specification : Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width to be used in Smoke Denison Specification:- PROV/S/4112/TC-11/2009-05. As per schedule no. CIT&C/PMS/36(d). As per CQA(T&C)Kanpur QAI No. CQA(T&C)/QAI/99 TC-11 R Estab
4) Drill Cotton Proofed White Bleached 71 cm[21]() Specification : IND/TC/097 (c) R Estab
5) 100 Percent Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min[21]() Specification : 100% Polyester Knitted Fleece fabric 230 Gms one sided raised width 150 CM Min specification :-Appendix "B" of Provisional Specification No. S/2594/C/CCWDCP/TC-15(a). Pantone Shade No 19-55513 TPX R Estab
6) Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm[21]() Specification : Cloth Polyester and Cotton Disruptive pattern 250 GSM for Jungle with Army Logo 152cm (Minimum Width) excluding selvedges. Specification No.:- Provisional Specification no.OCFAV/FABRIC/001(a). As per relevant clause of specification. R Estab
7) FABRIC NYLON 300 GSM RIPSTOP PU COATED F R 152 CMS WIDE[21]() Specification : FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a) R Estab
8) 100 PERCENT POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN[21]() Specification : 100% POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN. APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER R Estab
9) 100 Percent Nylon micro filament woven fabric olive green 50 GSM width 150 cm min[21]() Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.) Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer R Estab
10) FABRIC POLYESTER WHITE WIND CHEATER 115 GSM WIDTH 150CM MIN[21]() Specification : FABRIC POLYESTER WHITE (WIND CHEATER) 115 GSM WIDTH 150CM (MIN.) PANTONE SHADE NO. 11-0602 TPX SPECIFICATION:- AS PER APPENDIX 'A' OF PROVISIONAL SPECIFICATION N. S/3558/A/TC-15/COAT ECC (a) R Estab
11) OUTER SHELL FABRIC OUTER JACKET NYLON 95 GSM LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE WIDTH 150CM MIN PANTONE SHADE NO 19 0511 TPX[21]() Specification : OUTER SHELL FABRIC (OUTER JACKET) NYLON, LAMINATED WITH 15 MICRON TPU ON REVERSE SIDE, 95 GSM, WIDTH 150CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX. SPECIFICATION:- AS PER APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT R Estab
12) OUTER AND INNER SHELL NYLON FABRIC INNER JACKET NYLON 60 GSM WIDTH 150 CM MIN PANTONE SHADE NO 19 0511 TPX[21]() Specification : OUTER AND INNER SHELL NYLON FABRIC (INNER JACKET) NYLON 60 GSM WIDTH 150 CM (MIN.) PANTONE SHADE NO. - 19-0511 TPX SPECIFICATION :- AS PER APPENDIX 'E' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC (a) R Estab
13) INNER LINING KNITTED FABRIC OUTER JACKET POLYESTER 145 GSM WIDTH 150 CM MIN[21]() Specification : INNER LINING KNITTED FABRIC (OUTER JACKET) POLYESTER 145 GSM WIDTH 150 CM. (MIN.) PANTONE SHADE NO. 19-0516 TPX SPECIFICATION :- AS PER APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC (a) R Estab
14) CLOTH DRILL COTTON DISRUPTIVE PATTERN VAT PRINTED FOR BANDOLIERS WIDTH 142 CM MIN[21]() Specification : CLOTH DRILL COTTON DISRUPTIVE PATTERN (VAT PRINTED) FOR BANDOLIERS WIDTH 142 CM (MIN.) SPECIFICATION NO. JSS 8315-08:2021 (THIRD REVISION) R Estab
15) FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min[21]() Specification : FABRIC BLENDED POLYESTER and COTTON 70 30 DIGITAL CAMOUFLAGE PRINT TWILL WEAVE 215G WIDTH 150cm min SPECIFICATION APPENDIX A provisional specification No S/2594/C/CCWDCP/TC 15(a) Pantone shade No of outer camouflage fabric 191015 TCX R Estab
16) fabric polyester plain weave 110g olive green width 150cm min[21]() Specification : fabric polyester plain weave 110g olive green width 150cm min Specification appendix D of provisional specification No S/2594/C/CCWDCP/TC-15(a) with pantone shade 19-5513 TPX R Estab
Category :
Grade : Grade III
Size : M
1823 PERFECT YANTRAUDYOG
45 KARIM NAGAR HAPUR ROAD MEERUT Uttar Pradesh
PIN1 : 250002
Phone No. : 847490079
GSTIN : 09AEGPA0118K1ZV 		AEGPA0118K

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]() Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T C Nonestab
2) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]() Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) PROTECTING RING ASSY. 1000 LB() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) PROTECTING RING ASSY. 1000LB[62]() Specification : AS PER OFM SPECIFICATION R Nonestab
2) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
3) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
4) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
5) ROLLING RING ASSEMBLY 450KG (6231100104)[62]() Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.- ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, C Nonestab
Category : P
Grade : III
Size :
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
2) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED]. C Nonestab
3) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
4) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
5) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]() Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
2) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
3) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
4) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
5) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED. C Nonestab
6) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
7) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
8) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) WASHER TO DRG NO 1172 A 17 FOR 1000 LBS L F NO 6220901111[62]() Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY C Nonestab
2) WASHER FOR NOSE PLUG FOR 1000 LBS L F NO 6220901052[62]() Specification : WASHER FOR NOSE PLUG ARM-1049B.MATERIAL-NEOPRENE RUBBER TO IND/ME/884 (PROV) C-50,DC NO.3751-ME DATED 12-12-2002, OUTER DIA 101.60MM,INNER DIA 33.00MM AND THICKNESS 1.60MM. C Nonestab
3) WASHER RUBBER 250 KG BOMB L F NO 6240901300[62]() Specification : WASHER AS PER DRG. NO. ARDE 9501 -01 DET 12 TO SPECN. NEO-PRENE RUBBER TO IND/ME/884 [PROV] C3. [DRG. ENCLOSED].FOR 250 KG HSLD BOMB. C Nonestab
4) NEOPRENE RUBBER WASHER 450 KG L F NO 6231401501[62]() Specification : WASHER NEOPRENE RUBBER SPECN. IND/ME/884 [PROV] C3 TO DRG.NO. ARDE 2122 DET 15. [DRG. ENCLOSED FOR DIMENSION ONLY C Nonestab
5) O RING I D 38 0 250 KG L F NO 6241101204[62]() Specification : O RING I.D. 38.0 MM ,DIA WITH DIA 3.5 MM AS THICK TO SPECN IND/ME/884(PROV)C3 FOR 250 KG HSLD BOMB. C Nonestab
Category :
Grade : Grade III
Size : S
1824 NEMANI POLY PRODUCTS PVT. LTD.
SHED B, PLOT 24A, BAJRANG BALI AUDYOGIC ASTHAN, BHATTA AREA, PANKI KANPUR UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-3291348, 8874204951, 9336110932
GSTIN : 09AAACN4829R1ZR 		KNPN01179D

Download 		1) Field Gun Factory Kanpur
Name Specification Use Status
1) PLASTIC MOULDING ITEMS UP TO WT. 500 GM.() AS PER DRG. & SPECIFICATION 1 Estab.
2) FABRICATION OF SMALL AND MEDIUM COMPONENTS() AS PER DRG. & SPECIFICATION 2 Estab.
Category : P
Grade : II
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) CAPS KNEE COMPLETE[21]() Specification : IND/TC/3263(c) NOTE : F.O.T . SAMPLE MUST BE GOT APPROVED BEFORE BULK SUPPLY R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) PLASTIC STOPPER[21]() Specification : "SCH. NO. DMSRDE/LE-2/94(2) ATTACHED WITH SPECIFICATION NO.DMSRDE/T&GS/95/425(b) R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BUTTON PLASTIC KHAKI 16MM[21]() Specification : IS:1461-1984 REAFFIRMED 1991 AND SUPPLEMENTARY SCHEDULE R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) BUTTON PLASTIC VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) RUBBER STUD ROUND BLACK[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) PLASTIC STOPPER (BLACK)[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
4) BUCKLE PLASTIC 50 MM SQUARE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
5) FEMALE CAP (PUSH FIT) AS PER DRG.NO. SK-914 FOR A/F RG.NO. SK-914 FOR A/F[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) PLASTIC TOGGLE TYPE-I[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) Toggle Cord Stopper[21]() Specification : Prov. Specification No. S/6421/Bag Sleeping Lt Wt/TC-6 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Hanger PVC material having arrangement for hanging the Trouser.[21]() Specification : Hanger PVC material having arrangement for hanging the Trouser, sz. width-55mm, Length-85mm (- + 10) R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Metal Hooks 6 mm x Metal Clip 12 mm[21]() Specification : Size 1 Fig. 1 of IS Specification no. IS:4066-1967 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Plastic Buckle Black[21]() Specification : As per Requirements & Specifications R Estab
2) LDPE Sheet for Peak Interlining Size- Small, medium & Large[21]() Specification : As per Supp. Schedule No.Tex-1/1299/82/1 Appendix B to Prov. Specification No. S/2590/Cap FS Army Logo/TC-15(a) and dimensions as per Drawing Sheet with Prov. Specification No .S/2590 /Cap FS Army Logo/TC-15(a). R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Spring Type Cylindrical Plastic Stopper White[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR R Estab
2) SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR] R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) PLASTIC STOPPER OG[21]() Specification : PLASTIC STOPPER OG SPECIFICATION :- AS PER SCHEDULE NO. DMSRDE/LE-2/94(2) MENTIONED IN SPECIFICATION NO. JSS 4240-03-2011 R Estab
2) PLASTIC STOPPER CYLINDRICAL OG DOUBLE HOLE SPRING TYPE PANTONE SHADE NO 19 0511[21]() Specification : PLASTIC STOPPER (CYLINDRICAL) OG DOUBLE HOLE SPRING TYPE, PANTONE SHADE NO. 19-0511 AS PER DRAWING NO. OCFS/TS/PSDHST & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
3) PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE, PANTONE SHADE NO 19-0511 TPX AS PER DRAWING NO. OCFS/TS/PSSHSTN & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
4) PLASTIC RING FOR CORD PSN 19 0511[21]() Specification : PLASTIC RING FOR CORD PSN 19-0511 AS PER DRAWING & SAMPLE HELD WITH OCFS, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PRC & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
5) PLASTIC ANTIQUE TIP PSN 19 0511 TPX[21]() Specification : PLASTIC ANTIQUE TIP PSN 19-0511 TPX AS PER DRAWING, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PAT & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) D RING OF ROD THICKNESS 8 MM[9911037675]() Specification : Stainless Steel AISI Grade 316 As per Drawing OPF/G.C./2019 D Ring R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TOWING RING 20MM ID[2110025023]() Specification : DRG.NO.ADRDE/1402-02-002. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BUCKLE PLASTIC BLACK 38 MM[2110039015]() Specification : SPCNS: PLATE NO-6 OF DRG. ATTACHED WITH DMSRDE SPECN. NO. DMSRDE/T&GS/93/410(b) R Nonestab
2) BUCKLE PLASTIC QUICK RELEASE 40 MM BLACK[2110039016]() Specification : SPCNS. NO. DMSRDE/T&GS/93/406 R Nonestab
3) BUCKLE PLASTIC 48 MM BLACK[2110039017]() Specification : SPECIFICATION: PLATE NO. 6 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b) R Nonestab
4) BUCKLE STEEL 38 MM BLACK EPOXI PAINTED[2110039014]() Specification : PLATE NO. 8 OF DRAWING ATTACHED WITH SPECIFICATION NO. DMSRDE/T&GS/93/410(b) R Nonestab
5) BUCKLE STEEL 48 MM BLACK EPOXI PAINTED[2110039013]() Specification : SPCNS: PLATE-7 OF DRG. ATTACHED WITH SPECN. NO. DMSRDE/T&GS/93/410(b) R Nonestab
6) Grommet With Washer 23 MM Dia[2110080006]() Specification : SPECN-ADRDE/1.6.01-03-01-01 R Nonestab
7) Packing Bar cord Ring[2110090012]() Specification : ADRDE/1.6.01.04-30 (Prov.) R Nonestab
8) Spike[2110090007]() Specification : SPECN-ADRDE/1.6.01.04-29 (PROV.) R Nonestab
9) Hook for Rigging Lines Packing[2110090013]() Specification : ADRDE/1.6.01.04-31 (PROV.) & ADRDE/1.6.01.04-33 (PROV.) R Nonestab
10) LARGE PACKING ROD[2110090014]() Specification : ADRDE/1.6.01.04-32 (PROV.) R Nonestab
11) Clamp[2110029023]() Specification : ADRDE/1417. R Nonestab
12) Shoulder Adjustable Buckle ACPB CT[2110080015]() Specification : Specn No. ADRDE/194(a) R Nonestab
13) Pack Frame Main[2110025089]() Specification : Specn. No. 2.1.01-15-00. R Nonestab
14) Pack Frame Reserve[2110025096]() Specification : Specn. No. 2.1.01-19-00. R Nonestab
15) Metal Ring 50 MM Dia[2110029022]() Specification : Specn- 1.6.01.04-07-01 R Nonestab
16) Metal Ring 38 MM Dia[2110029021]() Specification : SPECN-ADRDE/1.6.01.04-09-01 R Nonestab
17) Metal Comp Pin[2110080013]() Specification : ADRDE/1.6.01.03.03-01 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Hanger PVC material having arrangement for hanging the Trouser[21]() Specification : Hanger PVC material having arrangement for hanging the Trouser, sz. width-55mm, Length-85mm (- + 10) R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Polypropylene Strapping zero point five mm Thick and 12 mm wide in white colour[21]() Specification : Polypropylene Strapping 0.5 mm Thick and 12 mm wide in white Colour (Duly Printed with Bilingual OCFS Name & OFB Logo in Red Colour) Quantity per roll 2000 mtrs. With core dia 8 inches suitable for strapping by Heat sealing method through R Estab
2) Polypropylene Strapping Size 19 MM x 0.55 MM Thick (Trader) [21]() Specification : Polypropylene Strapping Size 19 MM x 0.55 MM Thick Specification No. JSS: 8135-10:2004 except width which should be 19 mm Strap should be printed O.C.F. Shahjahanpur. Note-“The Logo of OCFS should be printed on Plasted Strapping at a R Estab
3) LDPE Sheet for Peak Interlining Size Small medium and Large[21]() Specification : As per Supp. Schedule No.Tex-1/1299/82/1 Appendix B to Prov. Specification No. S/2590/Cap FS Army Logo/TC-15(a) and dimensions as per Drawing Sheet with Prov. Specification No .S/2590 /Cap FS Army Logo/TC-15(a). R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) LDPE Sheet for Cap Balaclava OG Peak Interlining[21]() Specification : LDPE SHEET FOR CAP BALACLAVA OG PEAK INTERLINING FOR ALL SIZES SPECN. NO.1 APPENDIX "B " TO JSS.8405 ;25: 2010 REV NO.1 AMD NO.1&2. AND DRAWING AS PER APPENDIX "B" & "D" RESPECTIVELY PROV. SPECN NO. S/5094/TC/-1 (b)/Cap Bal OG(Imp) AS R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Spring Type Cylindrical Plastic Stopper White[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER WHITE PROVISIONAL SPECIFICATION NO. OCFS/PLASTIC STOPPER WHITE/NYLON 6 AS PER RELEVANT CLAUSE OF SPECIFICATION- OCF, SHAHJAHANPUR R Estab
2) SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK[21]() Specification : SPRING TYPE CYLINDRICAL PLASTIC STOPPER BLACK [PROVISIONAL SPECIFICATION NO.OCFS/PLASTIC STOPPER BLACK/NYLN 6 AS PER RELEVANT CLAUSE OF SPECIFICATION - OCF, SHAHJAHANPUR] R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) SNAP FASTENER FOUR PIECES SPRING TYPE 7 BY 7 WITH PLASTIC WASHER[21]() Specification : SNAP FASTENER (FOUR PIECES) SPRING TYPE 7/7 WITH PLASTIC WASHER IS:4741-1968 (AMDT. 1, REAFFIRMED 2003) EXCEPT FOR PULL STRENGTH WHICH SHOULD BE 4 KGF (MIN.), FOR PLASTIC WASHER - THICKNESS (UNDER PRESSURE 200 G/CM SQ.) 1.14 MM & DIA 12 R Estab
2) Button Polyester 19 mm OG[21]() Specification : IS:1461-1984 Second Revision (Reaffirmed-2003) and Supplementary Scheduled no. CQA (GS)/SS/346(b) Except that: (i) Material shall be polyester. (ii) Design & Dimensions: As per Drawing Enclosed (Drg. No. OCFAV/Button/002). (iii) In app. R Estab
3) RUBBER STUD ROUND BLACK[21]() Specification : NO.-T.S/002/BAG KIT UNIVERSAL DT. 19.12.2016 RUBBER STUD ROUND BLACK SPEC-AS PER ANNEXURE 'C' & DRAWING" OF RELEVANT SPECIFICATION OF BAG KIT UNIVERSAL MARK-II AS PER SPECIFICATION. AS PER SPECIFICATION R Estab
4) PLASTIC RING WITH HOLE BLACK FOR CORD[21]() Specification : PLASTIC RING WITH HOLE BLACK FOR CORD, DRAWING NO. - OCFS/039/PLASTIC RING WITH HOLE, BEST TRADE QUALITY & AS PER SEALED SAMPLE HELD WITH OCFS. R Estab
5) PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY[21]() Specification : PLASTIC STOPPER WITH TWO HOLE BLACK SUPERIOR QUALITY. DRAWING NO. OCFS/039/PLASTIC STOPPER 2 HOLE, BEST TRADE QUALITY & AS PR SEALED SAMPLE HELD WITH OCFS. R Estab
6) PLASTIC STOPPER CYLINDRICAL OG DOUBLE HOLE SPRING TYPE PANTONE SHADE NO 19 0511[21]() Specification : PLASTIC STOPPER (CYLINDRICAL) OG DOUBLE HOLE SPRING TYPE, PANTONE SHADE NO. 19-0511 AS PER DRAWING NO. OCFS/TS/PSDHST & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
7) PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE PANTONE SHADE NO 19 0511 TPX[21]() Specification : PLASTIC STOPPER OG SINGLE HOLE SPRING TYPE WITH ARRANGEMENT OF PASSING OF 7MM TAPE, PANTONE SHADE NO 19-0511 TPX AS PER DRAWING NO. OCFS/TS/PSSHSTN & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
8) PLASTIC RING FOR CORD PSN 19 0511[21]() Specification : PLASTIC RING FOR CORD PSN 19-0511 AS PER DRAWING & SAMPLE HELD WITH OCFS, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PRC & AS PER SAMPLE HELD WITH OCFS SPECIFICATION :- BEST TRADE QUALITY R Estab
9) PLASTIC ANTIQUE TIP PSN 19 0511 TPX[21]() Specification : PLASTIC ANTIQUE TIP PSN 19-0511 TPX AS PER DRAWING, PANTONE SHADE NO. 19-0511 TPX. AS PER DRAWING NO. OCFS/TS/PAT & AS PER SAMPLE HELD WITH OCFS. SPECIFICATION :- BEST TRADE QUALITY R Estab
10) LOW DENSITY POLYTHENE FILM 0 POINT 05 MM THICK 91 POINT 5 CM WIDE IN ROLL OF MIN 100 METER[21]() Specification : LOW DENSITY POLYTHENE FILM 0.05 MM THICK 91.5 CM WIDE IN ROLL OF MIN 100 METER SPECIFICATION :- IS:2508:1984 (2ND REVISION REAFFIRMED 2008 AMD 3) R Estab
Category :
Grade : Grade III
Size : S
1825 IST LIMITED
DELHI-JAIPUR HIGHWAY NO. 8 KAPRIWAS-DHARUHERA, DISTT. REWARI, HARYANA
PIN1 : 123110
Phone No. : 01274-267346, 267347, 267348 FAX: 01274-267444
GSTIN : 06AAACI0146A1ZF 		RTKI00525A

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)() DRG PT NO. IQX-69 GE DC NO. 36650-A DT. 26/2/00 SPECN:- F-1301-910540-K (CQA-0910) DC 36613-A DT. 11/11/99 C Estab
2) VALVE DRG NO.5209565 FOR 84HEAT-551 (9911357921)() VALVE TO DRG NO. 5209 565/DRG.NO.TRD-2-2-2247 C Nonestab
3) ELECTRIC SYSTEM F-1321-309852-A (9911356360)() DRG NO F-1321-309852-A DC NO. 34507-A DT. 20/12/88 SPECN F-1301-909840-C (CIA-0904) DC NO.34692-A DT. 5/04/88 C Nonestab
4) PIEZO ELECTRIC GENERATOR ASSY (9911357853)() DRG .NO. TRD 2-2-2203 C Nonestab
5) AFT CLOSURE WITH PLUNGER (9911357886)() DRG NO. TRD 1-2-2252 C Nonestab
6) SPACER TO DRG.NO.TRD-2-2-2273 (9911357855)() SPACER TO DRG.NO.TRD-2-2-2273 C Nonestab
7) SET OF 3COMP. FOR BOOSTER OF HEAT-551 (9911357953)() 1) BOOSTER CUP TO DRG NO.TRD-2-2-2277. 2) PIN TO DRG NO.TRD-1-2-2278. 3) PARTITION TO DRG NO.TRD-1-2-2279 C Nonestab
8) ARMING DEVICE (21 ITEM) TRD 2-2-2181 (9911357877)() ARMING DEVICE ( FUZE COMPONENTS CONSIST OF 21 ITEMS ) TO TRD NO 2-2-2181 & TRD NO. 2-2-2180 C Nonestab
9) SET 2 COMP. SHELL BODY & SUPPORT RING (9911357754)() SET OF 2 COMPONENTS ( FOR PROOF PURPOSE ):- a) SHELL BODY INERT, ARTCLE NO.1182404 OF 84MM TP 552. b) SUPPORT RING, ARTICLE NO. 5209308 OF 84MM TP 552 C Nonestab
10) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)() SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO. TRD-2-2-2277 & PIN TO DRG NO. TRD-1-2-2278 ) C Nonestab
11) ASSY OF S&A (EMPTY) COMPONENTS PFFC (9911357765)() AS PER SPECIFIED DRG. & SPECN. C Nonestab
Category : P
Grade : I
Size : M
1826 OPTIMIZED SOLUTIONS LIMITED
B-505, The FIRST B/H KESHAVBAUG PARTY PLOT, VASTRAPUR Ahmedabad Gujarat
PIN1 : 380015
Phone No. : 29707308
GSTIN : 24AAACO7440D1ZU 		AHMO00665A

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) 7440200813 AMPLIFIER[74]() Specification : 7440200813 AMPLIFIER Drg No.IUMK.468724.001 AMLIFIER TO DRG.NO.IUMK.468724 .001 FOR POWER UNIT OF 1G46 C Nonestab
2) 7440200814 COMPENSATING NETWORK[74]() Specification : 7440200814 COMPENSATING NETWORK Drg No.AL5072002 COMPENSATING NETWORK TO DRG.NO .AL5072002 FOR POWER UNIT OF 1G46. C Nonestab
3) 7440200815 ELECTRONIC ADJUSTMENT UNIT[74]() Specification : 7440200815 ELECTRONIC ADJUSTMENT UNIT Drg No.AL5103052 ELECTRONIC ADJUSTMENT UNIT TO DRG.NO.AL5.103.052 FOR POWER UNIT OF 1G46. C Nonestab
4) 7440200817 CONVERTER[74]() Specification : 7440200817 CONVERTER Drg No.AL5121082 CONVERTER TO DRG.NO.AL5121082 ,FOR POWER UNIT OF 1G46 C Nonestab
5) 7440200819 REGULATING UNIT[74]() Specification : 7440200819 REGULATING UNIT Drg No.AL5.122.014 REGULATING UNIT TO DRG.NO.AL5. 122.014,FOR POWER UNIT OF 1G46 C Nonestab
6) 7440200820 STABILIZER[74]() Specification : 7440200820 STABILIZER Drg No.AL5.123.051 STABILIZER TO DRG.NO.AL5.123. 051,FOR POWER UNIT OF1G46 C Nonestab
7) 7440200821 PULSE COUNTER[74]() Specification : 7440200821 PULSE COUNTER Drg No.IUMK 468.153.001 PULSE COUNTER TO DRG.NO IUMK 468.153.001 FOR POWER UNIT OF 1G46 C Nonestab
8) 7440200838 PLATE ASSY[74]() Specification : 7440200838 PLATE ASSY Drg No.AL6.731.111 PLATE ASSY TO DRG.NO.AL6.731. 111,FOR POWER UNIT OF 1G46 C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) VIDEO PROCESSING ELECTRONICS 7441121508[74]() Specification : VIDEO PROCESSING ELECTRONICS Drg No.CDR.TI(MK-II)T-72/EL/VPE/01(R) VIDEO PROCESSING ELECTRONICS F OR CDR. TI SIGHT OF TANK T-72 (BEL PART NO. 170000402008) (D ELICERABLES AS PER ATTECHED OL F SHEET NO. CDR. T C Nonestab
2) STRAIGHT FLEX PCB WITH LENGTH 7441121509[74]() Specification : STRAIGHT FLEX PCB WITH LENGTH Drg No.CDR.TI(MK-II)T-72/EL/FLEX PCB/ STRAIGHT FLEX PCB WITH LENGTH 115MM FOR CDR. TI SIGHT OF TAN K T-72 (BEL PART NO. 170000397 449) (DELIVERABLE AS PER ATTECHED OLF SHEET NO. CDR. TI (MK- C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) 7441121509 STRAIGHT FLEX PCB WITH LENGTH[74]() Specification : 7441121509 STRAIGHT FLEX PCB WITH LENGTH Drg No.CDR.TI(MK-II)T-72/EL/FLEX PCB/ STRAIGHT FLEX PCB WITH LENGTH 115MM FOR CDR. TI SIGHT OF TAN C Nonestab
2) 9001121271 VIDEO PROCESSING BOARD[90]() Specification : 9001121271 VIDEO PROCESSING BOARD Drg No.096701070400000 VIDEO PROCESSING BOARD DRG. NO . 096701070400000 ALONGWITH CONNECTORS AND MA C Nonestab
3) 9001121272 POWER SUPPLY CUM CONTROL BOARD[90]() Specification : 9001121272 POWER SUPPLY CUM CONTROL BOARD Drg No.096701070300000 POWER SUPPLY CUM CONTROL BOARD DRG. NO. 096701070300000 ALONGWITH CONNE C Nonestab
4) GYRO STABILIZER AL2564007 LF 7440200935[74]() Specification : GYRO STABILIZER, AL2.564.007 (LF-7440200935) E Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) VIDEO PROCESSING BOARD (LF 9001121271)[90]() Specification : VIDEO PROCESSING BOARD DRG NO. 096701070400000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG/SPECN. AS APPENDIX-1 OF 0 TO 18 PAGES ( TOTAL 19 SHEETS) C Nonestab
2) POWER SUPPLY CUM CONTROL BOARD (L.F.9001121272)[90]() Specification : POWER SUPPLY CUM CONTROL BOARD DRG.NO. 096701070300000 ALONGWITH CONNECTORS AND MATING CABLE AS PER ATTACHED DRG./SPECN. AS PER APPENDIX-II OF 5 PAGES. C Nonestab
Category :
Grade : Grade III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) 7441123477 50 PIN CABLES OF MIRROR UNIT[74]() Specification : 7441123477 50 PIN CABLES OF MIRROR UNIT A S PER DRG. NO. OLF/MISC/1123 C Nonestab
2) 7441123489 AUTOMAT CORD BL2360001 01[74]() Specification : 7441123489 AUTOMAT CORD BL2360001-01 C Nonestab
Category :
Grade : Grade III
Size : S
1827 CROWN INDUSTRIES
136 A Balaram Dey Street BALARAM DEY STREET KOLKATA West Bengal
PIN1 : 700006
Phone No. : 22414635
GSTIN : 19AAIFC8574B1ZA 		AAIFC8574B

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) ROPE HEMP H/L 12MM DIA[21]() Specification : IS:5176 GR.1 R Estab
2) ROPE POLYPROPYLENE MULTIFILAMENT 3 STRANDS H/L 6MM DIA UNDYED.[21]() Specification : PROV. SPECIFICATION NO. S/6014/TC-5 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) ROPE POLYPROPLENE 3 STRAND H/L O.G. 6 MM DIA[21]() Specification : IND/TC/2324 (b) EXCEPT THAT R Estab
2) ROPE POLYPROPLINE H/L 3 STRAND O.G. 8MM DIA[21]() Specification : SPECN IND/TC/2324(b) EXCEPT THAT R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) ROPE SISAL VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
2) LINE HEMP OR ROPE HEMP VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
3) ROPE POLYPROPELENE VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1828 RASH ENGINEERING
PLOT NO. 17, GUT NO. 43, BEHIND SEMENS LTD., M.I.D.C. WALUJ, AURANGABAD MAHARASHTRA
PIN1 : 131136
Phone No. : 9881786450 		AAPPI6752C

Download 		1) Ordnance Factory Bhusawal
Name Specification Use Status
1) BRACKET TOP FOR BOX SM-51() AS PER DRAWING/SPECIFICATION. R ESTAB.
2) BRACKET TOP FOR BOX SM-51() AS PER DRAWING/SPECIFICATION. R ESTAB.
Category : DP
Grade : III
Size : S
1829 Prem Textiles (International) Pvt Ltd.,
46A/27B, Sector-C, Industrial Area, Sanwer Road, Indore Madhya Pradesh
PIN1 : 452015
Phone No. : 0731-2722007 / 09893121334
GSTIN : 23AAECP1725C1Z1 		BPLP02994F

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth PC Disruptive (250 GSM) with Army Logo() PROV/OCFAV/FABRIC/001(a) R Not Estab.
2) Fabric PC Blended White for SDP-93cm() IS:2970(Type2) Blend composition P:C-67:33 as per IS:3416 R Not Estab.
3) Cloth Drill Cotton Dark Grey 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
4) Cloth Mercerised Cotton Light OG 142 CM (Minimum) Excluding Selvedges() PROV/OCFAV/Fabric/004 R Not Estab.
5) Fabric Twill Weave PC Disruptive 150 cm AL() PROV/S/2599/TC-11/2009/01 R Not Estab.
6) Cloth Twill Weave PC Disrup. 250 GSM Greenish Khaki 150 cm() PROV/S/2599/TC-11/2009/02 R Not Estab.
7) Cloth Calico Cotton White 91 cm() IS: 1544-1973 R Not Estab.
8) Cloth Mockleno Weave Polyester & Cotton Black 150 cm() Prov/OCFAV/Fabric/005 R Not Estab.
9) Cloth PC Disruptive (220 GSM) with Indian Army Logo() As per Specification & Requirement R Not Estab.
10) Cloth Polyester & Cotton (20:80) Greenish Khaki (250GSM) 152cm (minimum) excluding selvedges for Navy() PROV/OCFAV/FABRIC/001(a) without Disruptive Pattern R Not Estab.
11) Cloth Drill Cotton Greenish Khaki 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
12) Cloth Cotton Poplin Light Blue 150 cm() IS: 188-2004 (V.No.2) R Not Estab.
13) Cloth Drill Cotton White Bleached 142cm() VARIETY NO. 3 OF IS 177:1989 ( FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
14) Cloth Cotton Light Blue 142cm() SPECIFICATION: TYPE 2 OF IS:2970-87,REAFFFIRMED 2004 (FIRST REVISION) EXCEPT FOR AIR POROSITY. R Not Estab.
15) Cloth PW PC Deep Brown 150 CM() AIR HQ/DQAS/MG - 082 (REVISED 2004 ) R Not Estab.
16) Cloth Drill Cotton White Bleached 91 Cm() IS: 177-1989 AND (IV TH REV.)RE-AFFIR.1997,V.NO.3 R Not Estab.
Category : DDP
Grade : II
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) CLOTH DUCK COTTON 475 GMS O.G. W.P 91 CM VAT DYED[21]() Specification : IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2 R Nonestab
2) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 VARIETY NO. "A" R Nonestab
3) CLOTH COTTON CLOSELY WOVEN 170 GMS. DUAL SHADE (OG/WHITE) WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 (FIRST REVISION) R Nonestab
4) Cloth Cotton Closely Woven 235 gms. Dual Shade (OG/ White) WR 91 cms.[21]() Specification : JSS:8305-5-2000 (REV.NO. 1) VARIETY "B" R Nonestab
5) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS[21]() Specification : IS:1422-1983 V.NO. 2 EXCEPT THAT R Nonestab
6) CLOTH COTTON DOSUTIE WHITE BLEACHED 91 CMS.[21]() Specification : IS: 179-1977 VARIETY NO. 4 R Nonestab
7) CLOTH COTTON DOSSUTIE O.G. 91 CMS WIDE[21]() Specification : IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Nonestab
8) CLOTH DRILL COTTON WHITE BLEACHED 71 CMS(V.NO.3)[21]() Specification : IS : 177-1989 V.NO.3. R Nonestab
9) CLOTH DRILL COTTON O.G. 142 CMS.[21]() Specification : IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Nonestab
10) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS[21]() Specification : PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Nonestab
11) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.[21]() Specification : PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Nonestab
12) FLANNELETTE LINING BROWN 142 + -1CM WIDE WITH FIRM SELVAGE[21]() Specification : IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO R Nonestab
13) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. O.G.91 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
14) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
Category : p
Grade : Grade II
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) Cloth Cotton Closely Woven 235 gms. Dual Shade (OG/ White) WR 91 cms.[21]() Specification : JSS:8305-5-2000 (REV.NO. 1) VARIETY "B" R Nonestab
2) CLOTH COTTON CLOSELY WOVEN 170 GR. O.G. WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 VARIETY NO. "A" R Nonestab
3) CLOTH COTTON CLOSELY WOVEN 170 GMS. DUAL SHADE (OG/WHITE) WR 91 CMS.[21]() Specification : JSS: 8305-5-2000 (FIRST REVISION) R Nonestab
4) CLOTH DRILL COTTON O.G. 142 CMS.[21]() Specification : IS: 177 V.NO.4 & REVISED SCHE. OF PARTICULAR AS PER ANNX. R Nonestab
5) CLOTH COTTON DOSUTIE WHITE BLEACHED 91 CMS.[21]() Specification : IS: 179-1977 VARIETY NO. 4 R Nonestab
6) CLOTH DUCK COTTON 475 GMS O.G. W.P 91 CM VAT DYED[21]() Specification : IS:1422:1983(V.NO.3)REAFF.2000 WITH AMDT.1 OF APR "87,AMDT.2 R Nonestab
7) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS[21]() Specification : IS:1422-1983 V.NO. 2 EXCEPT THAT R Nonestab
8) CLOTH COTTON DOSSUTIE O.G. 91 CMS WIDE[21]() Specification : IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05) R Nonestab
9) FABRIC GREEN 205 GMS SPUN P.V. BLENDED DOPE DYED 148 CMS.[21]() Specification : PROV. SPECN. NO. PROV/S/4369/FABRIC GREEN PV/TC-11/2 (a) R Nonestab
10) CLOTH DUCK POLYSTER COTTON RIP STOP 425 GMS. O.G.91 CMS.[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
11) FLANNELETTE LINING BROWN 142 + -1CM WIDE WITH FIRM SELVAGE[21]() Specification : IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO R Nonestab
12) FABRIC 410 GMS OG WP P.V. DOPE DYED RIP STOP 148 CMS[21]() Specification : PROV. SPECN.NO. PROV/S/4369/FWP PV/RIP/TC-11/1 (a) R Nonestab
13) CLOTH DRILL COTTON WHITE BLEACHED 71 CMS(V.NO.3)[21]() Specification : IS : 177-1989 V.NO.3. R Nonestab
14) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Nonestab
15) CLOTH CALICO COTTON KHAKI 91 CM.[21]() Specification : IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3 R Nonestab
16) CLOTH CALICO COTTON WHITE BLEACHED 91 CM.[21]() Specification : IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02) R Nonestab
17) CLOTH CANVAS COTTON 545 GMS. O.G. W.P. 91 CMS. WIDE[21]() Specification : IS: 1424-1983 (V.NO.3) AND WATER PROOFNESS TO IS: 6803-1972 R Nonestab
18) CLOTH CANVAS COTTON 680 GMS. O.G. WP 91 CMS.[21]() Specification : IS: 1424-1983 (V.NO.2) REAFMD. 1995 & WATERPROOFNESS TO IS: 6803 R Nonestab
19) CLOTH DUCK COTTON 340 GMS SCOURED 91 CMS[21]() Specification : IS:1422-1983 (V.NO. 4) REAFF. 2000 WITH AMDT.NO.1 OF APR.,87 R Nonestab
20) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.[21]() Specification : IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS: 6803 LATEST EXCEPT R Nonestab
21) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 135 CM.[21]() Specification : SPECN.NO. IS:13510-2000, V.NO.1 (TABLE-1 OF CLAUSE 5.1) R Nonestab
22) LONG CLOTH COTTON WHITE BLEACHED 91 CMS[21]() Specification : IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986 R Nonestab
Category : p
Grade : Grade II
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) CANVAS CLOTH COTTON 410 (g) KHAKHI 91 CM TO SPECN IS: 1424-1983 (NO. 4)[70]() Specification : CANVAS CLOTH COTTON 410 (g) KHAKHI 91 CM TO SPECN IS: 1424-1983 (NO. 4) R Nonestab
Category : dp
Grade : Grade II
Size : M
1) Gun Carriage Factory
Name Specification Use Status
1) , ITEM CODE- 2101138895 , cloth duck[70]() Specification : cloth duck, RIP STOP, 610G, OLIVE GREEN,WATER PROOF, 91 CM WIDE,IND/TC/0145 ITEM CODE- 2101138895 R Nonestab
Category : dp
Grade : Grade II
Size : M
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC COTTON GREY MERCERISED WIDTH 94 CM[2101221967]() Specification : AS PER PARTICULAR =WIDTH=94 CM A.P.35+_5 Cuft/Sqft/Sec at 10"WHP Weight/Sq.Metre=115-117 Gram Thread /cm-Warp-28,WEft-25 Tex of Yarn Tex x Fold-Warp-9.4x2,Weft-9.5 R Nonestab
Category : p
Grade : Grade III
Size : M
1) Cordite Factory Arvankadu
Name Specification Use Status
1) CAMBRIC COTTON DYED & UNDYED[21]() Specification : IS 5088-1982 (REV.1) R Nonestab
2) CC AZURE BLUE[21]() Specification : CAMBRIC COTTON DYED AZURE BLUE 44" WIDE ISC NO:104 OF IS:5/2007 FOR AZURE BLUE (SIXTH REVISION) TO SPECN: IS: 5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2011 DC 3999-ME DT.08-01-2010 (VARIETY NO;2) R Nonestab
3) CC OLIVE GREEN[21]() Specification : CAMBRIC COTTON DYED OLIVE GREEN 915 MM WIDE (36") IS COLOUR CODE 220 OF IS:5-2007 (SIXTH REVISION) FOR OLIVE GREEN SPECIFICATION IS:5088 OF1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VAR R Nonestab
4) CC ORANGE[21]() Specification : CAMBRIC COTTON DYED LIGHT ORANGE 915 MM WIDE (ISC No.557 OF IS:5/2007) (SIXTH REVISION) SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2 SPECN IS:5088 OF 1982 (FIRST REV) WITH AMENDMENT NO.2 R Nonestab
5) CC SIGNAL RED 44[21]() Specification : CAMBRIC COTTON DYED SIGNAL RED 1117.6 MM (44") ISC COLOUR CODE 537 OF IS:5-2007 (SIXTH REVISION FOR SIGNAL RED SPECN : IS:5088 OF 1982 (FIRST REVISION) WITH AMENDMENT NO.2 REAFFIRMED 2007 DC3999-ME DT.08-01-2010 (VARIETY NO.2) R Nonestab
6) CC RED 36[21]() Specification : CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") (SIXTH REVISION) CAMBRIC COTTON DYED SIGNAL RED 915 MM WIDE (36") ISC COLOUR CODE 537 OF IS: 5-2007 (SIXTH REVISION) FOR R Nonestab
Category : ddp
Grade : Grade I
Size : M
1830 Mahindra Defence Naval Systems Limited
Mahindra Towers, P.K.Kurne, Dr. G.M.Bhisale Marg Worli Mumbai Maharashtra
PIN1 : 400018
Phone No. : 670712
GSTIN : 27AAHCM9573A1ZB 		AACHM9573A

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB BODY E SET ASSY 100 120KG PRE FRAG LF 9911358086[99]() Specification : SET OF BOMB BODY EMPTY ASSEMBALY TO DRG NO.0303 00 01 01 02 000 00PC & CONSISTING OF 29 COMPONENTS AND TO ARDESPECIFICATION NO.ARDE/SPECN/668 DATE DEC'2007 REV.3 DATE NOV.2015 FOR PRE-FRAG 100-120KG C Estab
Category : p
Grade : Grade III
Size : M
1831 Rolex Lanolin Products Ltd
plot no. 6309, phase IV, G.I.D.C Vapi Gujarat
PIN1 : 396195
Phone No. : 02602452233 		AAACR3499P

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) NIC LANOLINE ANHYDROUS LF NO 1034502000 Description : NIC LANOLINE ANHYDROUS LF NO 1034502000() Specification : NIC LANOLINE ANHYDROUS TO SPECN:- IND/SL/2804 (a) R Estab
Category : p
Grade : 3
Size : S
1832 VIJAYA INDUSTRIES
7-8-301/1,GOUTHAMNAGAR, FEROZGUDA HYDERABAD Telangana
PIN1 : 500011
Phone No. : 6666174617
GSTIN : 36AGHPG9544J1Z1 		AGHPG9544J

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) SLIDE TO DRG NO CTM 166[70]() Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol[70]() Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) SLIDE FOR YASHASVI AS PER DRG NO CTM 198 WITHOUT PLATING COATING Description : SLIDE FOR YASHASVI AS PER DRG NO CTM 198 WITHOUT PLATING COATING() Specification : SLIDE FOR YASHASVI AS PER DRG. NO. CTM-198 (WITHOUT PLATING/COATING) R Estab
Category : p
Grade : 3
Size : S
1833 Simplex Castings Limited
5, Industrial Estate Bhilai MAHARASHTRA
PIN1 : 490026
Phone No. : 0788-2283031 / 33 / 56
GSTIN : 22AABCS4650E1ZT 		JBPSO1058B

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) Manufacture of C.I. Ingot Mould 175 mm. Dia.() As per MSF Drawing No.- MP/121 R1 R Nonestab
2) Bottom Pouring SG Iron Ingot Mould to size 420 mm. Dia. X 218 mm. long() As per Drawing No. -LFVD/1000/12/A, Rev. 1 Matl. Specn. Spheroidal Cast Iron IS:1865, Grade:400/18 R Nonestab
3) 31 inch C.I. Ingot Mould() As per MSF Drawing No.-OH 1012/72 R2 R Nonestab
4) SG Iron Ingot Mould to size 20" X 2500 mm.() As per MSF Drawing No.- OH / 1012/153 R1 Matl. Specn. S.G.Iron IS:1865, Grade:400/18 R Nonestab
5) C.I. Mould 23" for Radial Forging() As per Drawing No.- OH 1012/150/1 (R1) R Nonestab
6) Bottom Pouring SG Iron Ingot Mould to size 450 mm. X 2250 mm. long() As per Drawing No.- OH 387, Matl. Specn. Spheroidal Cast Iron IS:1865, Grade:400/18 R Nonestab
7) Bottom Pouring SG Iron Ingot Mould to size 385 mm. X 2265 mm. long() As per Drawing No.- OH 391, Matl. Specn. Spheroidal Cast Iron IS:1865, Grade:400/18 R Nonestab
8) Slag Box for Electric Arc Furnace () As per MSF Drawing No.-15 ARC/1000/161/1 R1 R Estab
9) Top Plate and Bottom Plate() As per Drawing No.- LFVD/1000/32 R Nonestab
10) SG Iron Ingot Mould to size 23" X 2100 mm. long() As per Drawing No.- OH/1012/152 R1, Matl. Specn. S.G. Iron IS:1865, Grade:400/18 R Nonestab
Category : P
Grade : I
Size : L
1834 Tekneek Spinners (P) Ltd.
84th K.M. stone,G.T.Road,Sewah Panipat Haryana
PIN1 : 132103
Phone No. : 0180-6452677
GSTIN : 06AAECT7782P1ZH 		RTKT01459D

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Yarn Wool Polyamide (80:20) 240 Tex OG() OCFS/YARN WOOL POLYAMIDE(80:20) 240 TEX OG/2016.AS PER RELEVANT CLAUSE OF THE SPECIFICATION. R Not Estab.
Category : P
Grade : II
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Yarn Wool Polyamide (80:20) 240 Tex Air Force Blue[21]() OCFS/YARN WOOL POLYAMIDE (80:20) 240 TEX/BLANKET AF BLUE Except that Lot size as per Appendix C as per relevant Clause of the specification R Nonestab
Category : p
Grade : Grade II
Size : S
1835 CEAT LIMITED
BHANDUP PLANT, VILLAGE ROAD, BHANDUP MUMBAI MAHARASHTRA
PIN1 : 400078
Phone No. : 022-66823646
GSTIN : 27AAACC1645G1ZZ 		MUMC10660G

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) 12.00-20 18 PR CC /LPTA CC LV6/MT-14/2610-000301() As per Specification/drawing C Not Estab
2) 12.00-20 18 PR SCH /LPTA SCH LV6/MT-14/2610-000315() As per Specification/drawing C Not Estab
3) 355/90 20 18 PR CC /STLN CC B3303801 (9010106040000)() As per Specification/drawing C Not Estab
4) 355/90 20 18 PR SCH /STLN SCH B3303804 (9010106039000)() As per Specification/drawing C Not Estab
Category : P
Grade : I
Size : L
1836 Surya Precision Components
No 137/1 and 137/2, Shiva Farm, Magadi Main Road, Vrushabavathi Nagar, Bangalore Rajaji Nagar Bangalore Karnataka
PIN1 : 560079
Phone No. : 23505245
GSTIN : 29ADAFS6059A1Z5 		ADAFS6059A

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT ARDE DRG NO 17 04 02 02 00 01 001 00DA[60]() Specification : STEEL INSERT (ARDE DRG) DRG NO 17 04 02 02 00 01 001 00DA 06/04/2017 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
3) STEEL INSERT TO DRG NO. ARDE/SA/395 FOR BULLET 5.56 X 30MM CARTG.[60]() Specification : DRG NO. ARDE/SA/395 R Nonestab
4) STEEL INSERT AS PER DRG NO.0803-00-02-01-01-00100DA.[60]() Specification : DRG NO.0803-00-02-01-01-00100DA. C Nonestab
5) STEEL INSERT AS PER DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA.[60]() Specification : DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA. C Nonestab
6) STEEL INSERT (JVPC MK-II) DRG NO. 0204 0205 00 01 001 00 DC.[60]() Specification : DRG NO. 0204 0205 00 01 001 00 DC. C Nonestab
7) STEEL INSERT TO DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A.[60]() Specification : DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A. C Nonestab
8) STEEL INSERT (MODIFIED) FOR BULLET, DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001.[60]() Specification : DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001. C Nonestab
9) STEEL INSERT FOR BULLET FOR CARTG. 5.56MM X 30MM (MSMC) AS PER ARDE DRG.NO.0204-02-01-01-01-00-00DB[60]() Specification : ARDE DRG.NO.0204-02-01-01-01-00-00DB C Nonestab
10) STEEL INSERT. FOR 6.8MM BULLET AS PER DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.)[60]() Specification : DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.) C Nonestab
11) STEEL INSERT (MRN) FOR BULLET FOR CARTG. 5.56MM X 30MM, (R-31) MSMC (MRN) AS PER DRG. NO. - 0204-02-00-00-003-00XA[60]() Specification : DRG. NO. - 0204-02-00-00-003-00XA C Nonestab
Category :
Grade : Grade III
Size : S
1837 INDHRA ENGINEERING & SPARES
Flat No. 133/5, 1st Floor, Annai Flats, Padikuppam Road, Thirumangalam, Anna Nagar West, CHENNAI TAMIL NADU
PIN1 : 600040
Phone No. : 044 26156471
GSTIN : 33ANEPS7606R3ZA 		ANEPS7606R

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) ABSOLUTE SEALED LINEAR ENCODER() ND E Established
2) AC SPINDLE MOTOR () ND E Established
3) AC SERVO MOTOR () ND E Established
4) ADAPTER CABLE() 310123-05 E Established
5) ADAPTOR FOR RENISHAW PROBE () ND E Established
6) AK ERM 280 SCANNING HEAD () ND E Established
7) AXIS DRIVE MODULE 70 AMP() ND E Established
8) BATTERY/FAN PLUG IN UNIT() ND E Established
9) BRAKING RESISTANCE MODULE () ND E Established
10) CABLE OLFLEX CLASSIC() 110 12G E Established
11) CARD PCI() SCS02.1P-AN-NN E Established
12) CHECK VALVE () ND E Established
13) CLOSED LOOP CONTROLLER CARD () ND E Established
14) CONNECTOR FOR SIMO DRIVE () ND E Established
15) CONTROLLER CARD FOR 54 AMP DRIVE () ND E Established
16) COOLING UNITS FOR PANELS () ND E Established
17) CPU CARD() 6ES7216-2AD23-0XB0 E Established
18) ELECTRONIC IMAGE DISPLAY SCREEN () ND E Established
19) ENCODER,2048 PPR() 1325-2048 E Established
20) ENCODER CABLE () ND E Established
21) ENCODER ROD () 426B E Established
22) ENCODER COUPLING () ND E Established
23) E/R MODULE 16/21 KW () ND E Established
24) EXE 602E UNIT () 246842-02 E Established
25) HORIZONTAL KEY BOARD () ND E Established
26) HYDRAULIC PRESSURE RELIEF VALVE () ND E Established
27) HYDRAULIC PUMP() ND E Established
28) HPU UNIT SIROTEC-RCM-PHG () ND E Established
29) HIGH FREQUENCY REACTOR () ND E Established
30) INCREMENTAL ENCODER WITH 1-V () ND E Established
31) INCREMENTAL SEALED LINEAR ENCODER () ND E Established
32) INCREMENTAL ROTARY ENCODER () ND E Established
33) INDRA DRIVE FOR AXIS () ND E Established
34) INDRA DRIVE MAIN FILTER () ND E Established
35) LT MODULE 80 AMPS () ND E Established
36) OPERATOR PANEL () ND E Established
37) OPERATOR PANEL DISPLAY UNIT () ND E Established
38) OMP60 PROBE OPT() ND E Established
39) OPTICAL CABLE () ND E Established
40) MI12 INTERFACE UNIT () ND E Established
41) MACHINE CONTROL PANEL () ND E Established
42) MULTI FUNCTION TIMER () ND E Established
43) N1 CONTROLLER CARD () ND E Established
44) PCI CARD () ND E Established
45) PC ADAPTER USB PACKAGE () ND E Established
46) PCU 50, 128MB, 566 MHZ() ND E Established
47) POWER CABLE PREASSEMBLED () ND E Established
48) POWER MODULE () ND E Established
49) QUILL MOVEMENT MOTOR () ND E Established
50) SCREW SPINDLE PUMP () ND E Established
51) SCANNER HEAD FOR LINEAR SCALE () ND E Established
52) SEVO MOTOR IFT6() ND E Established
53) SIMATIC DP BASIC MODULE () BM142 ET200 E Established
54) SIMATIC BOX () PC 827B E Established
55) SIMATIC DP CONNECTING BLOCK () ND E Established
56) SIMATIC FLAT PANEL 15T () ND E Established
57) SIMATIC DP, 5 ELECTRONIC MODULES () ND E Established
58) SINAMICS S120 SINGLE MOTOR MODULE () ND E Established
59) SINAMICS S120 DOUBLE MOTOR MODULE() ND E Established
60) SINAMICS HFD LINE REACTOR FOR 36KW () ND E Established
61) SIMATIC S7-300 INTERFACE MODULE() ND E Established
62) SINAMICS SENSOR MODULE S120 () ND E Established
63) SINAMICS S120 SMARTLINE MODULE () 611 E Established
64) SIMODRIVE () ND E Established
65) SINAMICS S120 ACTIVE MODULE () ND E Established
66) SINAMICS CONTROL UNIT () CU320-2DP E Established
67) SINAMICS DRIVE-CLIQ MODULE CABINET () ND E Established
68) SINAMICS S120 SENSOR MODULE SMC20 () ND E Established
69) SINAMICS TERMINAL MODULE () TM31 E Established
70) SINAMICS S120 SMART LINE MODULE () ND E Established
71) SINUMERIK OPERATOR PANEL () ND E Established
72) SIGNAL CABLE PREASSEMBLED () ND E Established
73) SIGNAL CONNECTOR 12 PIN () ND E Established
74) SINAMICS SMI20,COMPACT FLASH CARD () ND E Established
75) SPINDLE DRIVE SIMOREG DC MASTER () ND E Established
76) STRAIGHT PNEUMATIC GRINDER () LFB 44 E Established
77) SINAMICS CAPACITOR MODULE,INPUT() ND E Established
78) SINUMERIK MACHINE CONTROL PANEL() ND E Established
79) SINUMERIK 840D SL,NCU 710.3B PIN() ND E Established
80) SINUMERIK 840 D/DE,CNC-HARDWARE() ND E Established
81) SINUMERIK NCU 571.5 () ND E Established
82) SINUMERIK CNC HARDWARE () 828D E Established
83) SINUMERIK OPERATOR PANEL FRONT () ND E Established
84) SINUMERIK VERTICAL KEY BOARD () 802DSL E Established
85) SIROTIC CABLE() ND E Established
86) SUPPLY AND INSTALLATION OF SIEMENS () ND E Established
87) STYLUS, RENISHAW MAKE () ND E Established
88) SUPPLY & INSTALLATION OF AXIS DRIVE () ND E Established
89) VISUAL DISPLAY UNIT () FP77 E Established
90) VIDEO INTERFACE CARD () ND E Established
Category : DP
Grade : II
Size : S
1838 MAXCRAFT
No. 79, 3rd main Rajaji Nagar Industrial Town Bangalore Karnataka
PIN1 : 560010
Phone No. : 9739238343
GSTIN : 29APKPM9820R1ZT 		APKPM9820R

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT ARDE DRG NO 17 04 02 02 00 01 001 00DA[60]() Specification : STEEL INSERT (ARDE DRG) DRG NO 17 04 02 02 00 01 001 00DA 06/04/2017 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
3) STEEL INSERT TO DRG NO. ARDE/SA/395 FOR BULLET 5.56 X 30MM CARTG.[60]() Specification : DRG NO. ARDE/SA/395 R Nonestab
4) STEEL INSERT AS PER DRG NO.0803-00-02-01-01-00100DA.[60]() Specification : DRG NO.0803-00-02-01-01-00100DA. C Nonestab
5) STEEL INSERT AS PER DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA.[60]() Specification : DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA. C Nonestab
6) STEEL INSERT (JVPC MK-II) DRG NO. 0204 0205 00 01 001 00 DC.[60]() Specification : DRG NO. 0204 0205 00 01 001 00 DC. C Nonestab
7) STEEL INSERT TO DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A.[60]() Specification : DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A. C Nonestab
8) STEEL INSERT (MODIFIED) FOR BULLET, DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001.[60]() Specification : DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001. C Nonestab
9) STEEL INSERT FOR BULLET FOR CARTG. 5.56MM X 30MM (MSMC) AS PER ARDE DRG.NO.0204-02-01-01-01-00-00DB[60]() Specification : ARDE DRG.NO.0204-02-01-01-01-00-00DB C Nonestab
10) STEEL INSERT. FOR 6.8MM BULLET AS PER DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.)[60]() Specification : DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.) C Nonestab
11) STEEL INSERT (MRN) FOR BULLET FOR CARTG. 5.56MM X 30MM, (R-31) MSMC (MRN) AS PER DRG. NO. - 0204-02-00-00-003-00XA[60]() Specification : DRG. NO. - 0204-02-00-00-003-00XA C Nonestab
Category :
Grade : Grade III
Size : S
1839 UNITY ENGINEERING CORPORATION
264, GOHALPUR, KATNI ROAD JABALPUR MADHYA PRADESH
PIN1 : 482002
Phone No. : 07612460641, 9425359641
GSTIN : 23ACHPA7577K1ZF 		JBP511151B

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) LID CORNER PIECE() AS PER GCF SPEC. /DRG/SIZE AND REQUIREMENT C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1840 MKU LIMITED
13, Gandhi Gram, G.T.Road, KANPUR Uttar Pradesh
PIN1 : 208007
Phone No. : 0512-2409977
GSTIN : 09AACCM6302Q1Z4 		AACCM6302Q

Download 		1) Ordnance Factory Medak
Name Specification Use Status
1) ANTI BALLISTIC PRODUCTS JACKETS AND VESTS() As per requirement C Not Estab
2) ARMOUR PLATES HELMETS DEMINING SUITS AND BOMB BLANKETS() - do - C Not Estab
3) LIGHT WEIGHT ARMOUR SOLUTIONS FOR VESSESLS AIR CRAFT LAND VEHICLES() - do- C Not Estab
4) NIGHT VISION DEVICES() - do - C Not Estab
Category : DDP
Grade : I
Size : L
1) Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR) Description : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR)() Specification : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WI C Estab
Category : p
Grade : 1
Size : L