List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1741 AKS ENTERPRISES
150-B DADA NAGAR INDUSTRIAL AREA KANPUR INDUSTRIAL AREA KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 22406057
GSTIN : 09AAOFA1149E1ZK 		AAOFA1149E

Download 		1) Ordnance Parachute Factory
Name Specification Use Status
1) shoulder buckle() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) LAP STRAP ADJUSTABLE BUCKLE (FOR PILOT PARA JAGUAR A/C.)[2110075021]() Specification : SPCN.AS PER ADRDE/1456. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) ADJUSTMENT BUCKLE[2110071004]() Specification : DRG.NO.:ADRDE/1304 (a) DRD/46/98. R Nonestab
2) SHOULDER BUCKLE (UPPER)[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHOULDER ADJUSTABLE BUCKLE (A.C.P.B./C.T.)[2110080015]() Specification : SPECN NO. ADRDE\194(a). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BUCKLE ADRDE/1429-01[2110029012]() Specification : DRG.NO.DRD/344/96 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) RING 14 MM[2110038004]() Specification : SPECN.NO-ADRDE/1324(a). R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PIN WITH PULLY[2110071016]() Specification : DRG. NO.:ADRDE/1300-G(b) DRD/33/98 R Nonestab
2) SHOULDER BUCKLE (UPPER)[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BUCKLE[2010019021]() Specification : SPECN.NO:-ADRDE/PAS/2008/22. R Nonestab
2) LOCK OCK WITH BUCKLE[2110069032]() Specification : ADRDE/1354. R Nonestab
3) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]() Specification : DRG.NO.-ADRDE/PAS/2007/16. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) QUICK RELEASE ADJ. BUCKLE[2110062009]() Specification : Drawing No. : ADRDE/205(d) R Nonestab
2) DETACHABLE SHROUD LINK[2110071001]() Specification : DRG. NO.:ADRDE/1299-G(c) DRD/32/98 R Nonestab
3) SPREADLE BAR BUCKLE[2110075002]() Specification : DRG. NO.ADRDE/1341(c) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) METAL PULLY ( COMPONENT )[2110060019]() Specification : SPECN.NO.ADRDE/1449. R Nonestab
2) PULLY FOR LINK 25 M LONG[2110029016]() Specification : ADRDR/1292. R Nonestab
3) PULLY[2101069001]() Specification : SPECN. NO. ADRDE/1159-A-2/SA-6 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) CLAMPING BUCKLE FOR SADDLE STRAP Cat/Part No.: 14/5420-000152[2010990466]() Specification : DRAWING NO.: IMPD-0947 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BUCKLE BRASS NO 50[2111252051]() Specification : SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) PULLY RTU.[2110026012]() Specification : DRG. NO.ADRDE/1041A-2/SA-1 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) TOWING RING 20MM ID[2110025023]() Specification : DRG.NO.ADRDE/1402-02-002. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) NIV TRIANGULAR D RING[2010020005]() Specification : DRAWING NO. CQA(GS)/US/560 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]() Specification : DRAWING NO. : JSS 1670-05 : 2013 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]() Specification : ADRDE/1210(c) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) DISCONNECT LOCK WITH BUCKLE[2110019013]() Specification : DRG.NO.ADRDE/1355. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BUCKLE PACK OUTER(PTRM)[2102062825]() Specification : SPECN.NO.IND/GS/1795 C Nonestab
2) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
3) BUCKLE D SHAPED (PTR-M)[2102053921]() Specification : SPECN.NO.IND/GS/1798 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM[2102064015]() Specification : SPECN.NO.IND/GS/1802 C Nonestab
2) BUCKLE PACK OUTER(PTRM)[2102062825]() Specification : SPECN.NO.IND/GS/1795 C Nonestab
3) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]() Specification : DRAWING NO. CQA(GS)/US/562 C Nonestab
4) BUCKLE D SHAPED (PTR-M)[2102053921]() Specification : SPECN.NO.IND/GS/1798 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) BUCKLE BRASS NO 50[2111252051]() Specification : SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) HOLDING BUCKLE[2110071002]() Specification : DRG.NO.:ADRDE/1297 ( b ) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) LAP STRAP ADJUSTABLE BUCKLE (FOR PILOT PARA JAGUAR A/C.)[2110075021]() Specification : SPCN.AS PER ADRDE/1456. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) GROMMET WITH WASHER 11mm[2110060007]() Specification : SPECIFICATION :DRAWING NO ADRDE/306(a) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) MODIFIED COIL SPRING[2110005001]() Specification : SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) D RING OF ROD THICKNESS 8 MM[9911037675]() Specification : Stainless Steel AISI Grade 316 As per Drawing OPF/G.C./2019 D Ring R Nonestab
2) BRASS EYELET 28 MM WITH WASHER[9911037674]() Specification : Best trade quality R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHACKLE WITH NUT AND BOLT BLACK[2110077022]() Specification : DRG. NO. ADRDE/ 1348-G (b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]() Specification : DRAWING NO JSS: 5340-05:2014 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) LOCK OCK WITH BUCKLE[2110069032]() Specification : ADRDE/1354. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SHOULDER BUCKLE UPPER[2110071006]() Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98. R Nonestab
2) CROSS CONNECTOR STRAP SAFETY PIN[2110019020]() Specification : DRG.NO.ADRDE/1390 R Nonestab
3) FEMALE COUPLING FOR CWL[2110075039]() Specification : DRG. NO. ADRDE/1344(b) R Nonestab
4) QUICK RELEASE LINK PAE BAG[2110018011]() Specification : SPCN.NO.ROV.DRG.NO.ADRDE/113(b) R Nonestab
5) BUCKLE STEEL 48 MM BLACK EPOXI PAINTED[2110039013]() Specification : SPCNS: PLATE-7 OF DRG. ATTACHED WITH SPECN. NO. DMSRDE/T&GS/93/410(b) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]() Specification : DRAWING NO. : JSS 1670-05 : 2013 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]() Specification : ADRDE/1210(c) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) SPRING CLIP COMPLETE ASSEMBLED WITH LINKWITHOUT STRAP FOR BOX C -18() AS PER DRG. NO. ISV-93 R
2) TRADE ASSISTANCE FOR HOT DIP GALVANIZATION OF PIN TENT CARBON STEEL SMALL() HOT DIP GALVANISED TO IS: 4826-1979 R
3) "D" RING 19 MM NICKLE PLATED (FOR POUCHESAMMUNITION SYNTHETIC WEB EQUIPMENT)() DMSRDE/T&GS/99/440 . R Established
4) "D" RING 19 MM NIKCLE PLATED X 10.5 MM X 2 MM DIA (FOR POUCHES AMMUN. ) SYNTHETIC WEB EQUPT.() AS PER REQUIREMENT & SPECIFICATION R Established
5) "D" RING 19MM NICKLE PLATED FOR POUCHES AMMUN. (SYNTHETIC WEB EQUIPT.)() AS PER REQUIREMENT & SPECIFICATION R Established
6) "D" RING FOR BAG HARNESS (BBD) SIZE 28 MM X 20 MM() DRG. NO.SK-1191 R Established
7) "D" RING FOR BAG HARNESS (BBD) SIZE 36 MM X 12 MM() DRG.NO.SK-1191 R Established
8) "D" RING STEEL TO BS:970 PT.1-1983 GD.080 M 40() Drawing as per matl.3 of drawing no. SK-1197 R Established
9) ALLUMUNIUM WASHER FOR EYLET NO. 18() IS:4084-78 CIGS/SS/335 R Established
10) ALUMINIUM WASHER PLAIN NO.18 BLACK ANODISED() IS: 4084-1978 R Established
11) ARMING FORK () AS PER DRAWING NO. SK 954 R Established
12) AUTO IGNITION MECHANISM FOR "FUEL EFFICIENT AYUDH BUKHARI"() AS PER REQUIREMENT & SPECIFICATION R Established
13) AUTO IGNITION OPERATING HANDLE (AI), AS PER SAMPLE() AS PER REQUIREMENT & SPECIFICATION R Established
14) CONE RING COMPLETE SK/956() SK /756 R Established
15) CONE RING DET 6/2() OEF.DRG.NO.SK-965/A R Established
16) CONTAINER NO 1 MK 2 FOR PACKING OF TAIL UNIT NO-107 MK IV() AS PER REQUIREMENT & SPECIFICATION R Established
17) "D" RING (ITEM NO.1 & 2) AS PER DRG. NO. CQASV-36729420107 (7916/D/PK)() AS PER REQUIREMENT & SPECIFICATION R Established
18) "D" RING (MS WIRE) 25MM CR/NICKLE PLATED() AS PER REQUIREMENT & SPECIFICATION R Established
19) "D" RING 30 MM DIA NICKLE PLATED() AS PER REQUIREMENT & SPECIFICATION R Established
20) "D" RING MS NICKLE PLATED 22 MM X 19 MM X 4 MM DIA() DMSRDE/T&GS/85/325 (b) PLATE 8 R Established
21) "D" RING 18 MM FOR BAG WATER PROOF() AS PER REQUIREMENT & SPECIFICATION R Established
22) FLAT HEAD MS PIN DIA 3.2 X LG..5MM() AS PER REQUIREMENT & SPECIFICATION R Established
23) FLAT HEAD PIN DIA 2MM LG.13MM(QS)() AS PER REQUIREMENT & SPECIFICATION R Established
24) FLAT HEAD PIN DIA 3MM, LG.25MM(AI)() AS PER REQUIREMENT & SPECIFICATION R Established
25) FLAT HEAD PIN DIA 3MM, LG.35MM(QS)() AS PER REQUIREMENT & SPECIFICATION R Established
26) FLAT PLIERS 7814-0091 U 15X10() NO. GOST-5547-86 R Established
27) GAL. M.S. SEAL FOR 12 MM WIDE IRON HOOP() AS PER REQUIREMENT & SPECIFICATION R Established
28) GALVANISED MILD STEEL SEAL FOR USE WITH MILD STEEL STRIP 20 MM WIDE & 0.9 MM THICK() AS PER REQUIREMENT & SPECIFICATION R Established
29) GALVANISED MILD STEEL SEAL SUITABLE FOR USE WITH POLYPROPYLENE 19 MM WIDE TAPE() AS PER REQUIREMENT & SPECIFICATION R Established
30) GALVANIZED MILD STEEL SEAL FOR USE WITH MILD STEEL HOOPS 16 MM WIDE & O.9 MM THICK() AS PER REQUIREMENT & SPECIFICATION R Established
31) GALVANIZED MILD STEEL SEALS SUITABLE FORUSE WITH TAPE POLYTHINE/RAYON STRAPPING 12.5 +/- 0.5MM() DMSRDE/T&GS/88/333(C) R Established
32) IRON HOOP 23 BG (0.71MM) THICK X 12 MM WIDE() IS: 1029-1970 R Established
33) LEVER LOCKING DET 46() Drg. NO. SK-985 R Established
34) LID CAP TANK MULE MK-4() AS PER REQUIREMENT & SPECIFICATION R Established
35) LIGHT WEIGHT STEEL BUT HINGE SIZE - 75 MM() IS: 1341-1962 R Established
36) LINK (40X19X6MM DIA)() AS PER REQUIREMENT & SPECIFICATION R Established
37) LINK BRASS SIDE BAR (SADDLE SU PATT 02)() AS PER REQUIREMENT & SPECIFICATION R Established
38) LINK EJECTION CHUTE() DRG. NO. 675-51-Cb141 R Established
39) LINK EXTENSION() AS PER REQUIREMENT & SPECIFICATION R Established
40) LOCATING PIN DET 6/3() OEF DRG. NO. SK - 966/A R Established
41) LOCKS 3" NUCKLE PLATED RIGHT AND LEFT() AS PER REQUIREMENT & SPECIFICATION R Established
42) LOOP PIN() O.E.F.DRG No. 7610/PK ITEM No.6 R Established
43) S.M.GALVENISED SEAL FOR 12.00 MM WIDE POLY PROPELENE STRAPPING() AS PER REQUIREMENT & SPECIFICATION R Established
44) S.M.SPLIT PIN 1.6X16MM LONG() IS:549 R Established
45) SEAL LEAD 9.5 MM 3/8" (O.E.F. DRG. NO. SK-710 DT. 17.8.88() AS PER REQUIREMENT & SPECIFICATION R Established
46) SHELTER PORTABLE NO. 6 MK-II PIN 508 MM() DRG. NO. 7792/PK DT. 07.4.2000 R Established
47) SHELTER PORTABLE NO.6 MK-2 PIN 381 MM (DROP FORGED)() DRG.NO. iIM-0651 (7792/PK DT. 07.04.2000) R Established
48) TRIANGULAR "D" RING NICKLE PLATED() AS PER REQUIREMENT & SPECIFICATION R Established
49) WASHER ALUM. 5.5MM (I/D) X 10MM (O/D) X 1MM THICK() IS:2016 TYPE A R Established
50) "U" PIN () CQA(GS)/US/467(B),CADMIUM PLATED AS PER IS:1572-1986 R Established
51) BUCKET LARGE RING STEEL LARGE() DRG. NO. IND/GS/1427(d) (686/PK) R Established
52) BUCKET LARGE RING STEEL SMALL() AS PER REQUIREMENT & SPECIFICATION R Established
53) CATCH ASSEMBLED WITH HOOK NICKLE CROME PLATED() TO D.S. CAT NO.1005-006573 & NICKLE CROME R Established
54) CATCH ASSEMBLED WITH LINK (WITHOUT STRAP) AS PER DRG.NO.SV-290 (2221/B/PK)() AS PER REQUIREMENT & SPECIFICATION R Established
55) CATCH STEEL TO IS:7226-C 40 HARDNESS 250 TO 300 H.V.() Drawing as per matl. 2 of drawing no. SK-1197 R Established
56) CHAIN 11 LINK WITH DEES, CHAPES & PIN() DRG. NO. SK-1135 R Established
57) CHAIN 28 LINK WITH DEES & CHPAES() DRG. NO. SK-1136 R Established
58) CHAIN FOR POLE DOOR ALUMINIUM ALLOY DRG NO. SK-1000() IS:1572-1986 GR. B TYPE-2 FOR CADMIUM PLATING R Established
59) CHAIN FOR POLE STANDING ALUMINIUM ALLOY. DRG.NO.SK-1001() IS: 1572-1986 GR. B TYPE-2 FOR CADMIUM PLATING R Established
60) CHAPE BRASS FOR SCABBERED KOOKIRIES() ACIW (INFY) SK-2 DS CAT NO.1095-000075 (1986/PK DT.02.09.92) R Established
61) CHAPE BRASS SIDE BAR() AS PER REQUIREMENT & SPECIFICATION R Established
62) CHAPES 100 X 13 X 0.5 MM THICK() DMSRDE/T&GS/79/247 (5889/PK) R Established
63) CLIP 60MM() AS PER REQUIREMENT & SPECIFICATION R Established
64) CLIP END STRAP BRASS 13MM WE() IND/GS/468(G) R Established
65) CLIP END STRAP BRASS 19MM() IND/GS/1541 (5627/PK DT. 21.9.1990) R Established
66) CLIP END STRAP BRASS 20 MM UNPUNCHED () IND/GS/1541 (5627/PK) R Established
67) CLIP END STRAP BRASS 25 MM UNPUNCHED () IND/GS/1541 (5627/PK) R Established
68) CLIP END STRAP BRASS 25 MM BRONZED UNPUNCHED() AS PER REQUIREMENT & SPECIFICATION R Established
69) CLIP END STRAP BRASS 25MM() IND/GS/1541 (5627/PK DT. 21.9.1990) R Established
70) CLIP END STRAP BRASS 51 MM BRONZED() AS PER REQUIREMENT & SPECIFICATION R Established
71) CLIP IRON (FOR TENT EXTENDABLE)() CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED. R Established
72) HING CLIP COMPLETE ASSEMBLED WITH LINK FOR BOX C-18() AS PER DRG. NO. ISV-710 R Established
73) HING COMPLETE ASSEMBLED WITH LINK AS PER DRG.NO.SE-232 DET.5() AS PER REQUIREMENT & SPECIFICATION R Established
74) HING WITH LINK COMPLETE ASSEMBLED AS PER DRG.NO.SE-221 OF SHEET 2/2 DET.6() AS PER REQUIREMENT & SPECIFICATION R Established
75) HINGE COMPLETE ASSEMBLED WITH LINK AS PER DRG. NO. SE 113 DET. 16 & 17 FOR CARRIER 6 A/L() DRG. SHEET 3/11 OF 6573/B/PK R Established
76) HINGE PIN() AS PER REQUIREMENT & SPECIFICATION R Established
77) HINGES PRESSED STEEL BUTT 4" (100MM)() AS PER REQUIREMENT & SPECIFICATION R Established
78) HINGES PRESSED STEEL TABLE 2"() AS PER REQUIREMENT & SPECIFICATION R Established
79) HOOK ASSEMBLY COMPLETE (FOR SLING FOR MP5 KHAKI)() AS PER REQUIREMENT & SPECIFICATION R Established
80) HOOK BRASS FOR TENT AS PER DRG. NO. IND/TC/2234(C) PAGE NO. 15 (5596/PK)() AS PER REQUIREMENT & SPECIFICATION R Established
81) HOOK BRASS HAVERSACK RIGHT NICKLE CHROME PLATED() CQA(GS)/US/324 EXCEPT THAT MATERIAL WILL BE BRASS R Established
82) HOOK BRASS HAVERSACK WE PATT 37 LEFT POLISHED() AS PER REQUIREMENT & SPECIFICATION R Established
83) HOOK BRASS HAVERSACK WE PATT 37 RIGHT POLISHED() AS PER REQUIREMENT & SPECIFICATION R Established
84) HOOK BRASS STRAP HAVERSACK LEFT NICKLE CHROME PLATED() CQA(GS)/US/324 EXCEPT MATL. R Established
85) HOOK BRASS WITH 57 MM TIP NICKLE - CHROME PLATED() IND/GS/1541 CAT PART NO. CN/8315-000058, NICKLE CHROME R Established
86) HOOK IRON() CQA(GS)/US/467(b) (5986/PK DT. 8.9.03) EXCEPT R Established
87) HOOK SLING () DRG. NO.IM-0284 (6304/PK) R Established
88) HOOK SLING MK-I COMPLETE ASSEMBLED BRONGE() DRG.NO. DD(E) 1864 DS CAT NO.1005005680(2847/B/PK) R Established
89) HOOK STEEL (NOS 28 IN A SET) FOR CASES WOOD SORTING FOLDING() AS PER REQUIREMENT & SPECIFICATION R Established
90) HOOK STEEL FOR BAG WATER PROOF() AS PER REQUIREMENT & SPECIFICATION R Established
91) HOOK STEEL TO IS:4454 (PT.1) GD.3() Drawing as per matl. 4 of drawing no. SK-1197 R Established
92) HOOK WITH CHAINS AND RINGS() DRG NO.IND/GS/1659 (d) (638/PK) R Established
93) HOOKS ALU. ALLOY 57 MM BLACK ANODISED() CQA(GS)/US/324 (5653/PK) R Established
94) HOOKS ALU. ALLOY HAVERSACK RIGHT BLACK ANODIZED() CQA(GS)/US/324 (5653/PK DT. 9.3.2000) R Established
95) HOOKS ALUMN. ALLOY HAVERSACK LEFT BLACK ANODISED() AS PER REQUIREMENT & SPECIFICATION R Established
96) HOOKS ALUMN. ALLOY WITH TIPS 57MM BLACK ANODISED() CQA(GS)/US/324 (5653/PK DT.26.12.2003) R Established
97) HOOKS BRASS 57MM() IND/GS/1541 (5627/PK DT. 19.02.2001) R Established
98) LINK FOR CATCH LOCKING FOR CARRIER 13A DRG. NO. SK-1008)() AS PER REQUIREMENT & SPECIFICATION R Established
99) LINK FOR HINGE FOR CARRIER-13-A DRG. NO.SK-1002() AS PER REQUIREMENT & SPECIFICATION R Established
100) LOCK (CATCH) ASSEMBLED WITH LINK ASPER DRG. NO. SE 113 DET 9,10 & 11 FOR CARRIER 6 A/L() DRG. SHEET 5/11, 6/11, 7/11 AND 8/11 OF 6573/E/PK TO G/PK R Established
101) LOCK COMPLETE ASSEMBLED WITH LINK AS PERDRG. NO.SE-232 DET.I,14 & 9() AS PER REQUIREMENT & SPECIFICATION R Established
102) PIN CARBON STEEL FOR TENT FOR HOT DIP GALVANISED() IS: 4826-79 R Established
103) PIN CARBON STEEL SMALL () IND/GS/1630 (5836/PK), CADMIUM PLATED AS PER IS:1572-1986 R Established
104) PIN TENT ANGLE IRON MED.MK-2() CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Established
105) PIN TENT ANGLE IRON MED.MK-2 FOR HOT DIP GALVANISED() IS: 277-85 R Established
106) PIN TENT ANGLE IRON MED.MK-II() CQA (GS)/US/428 (5877/PK) & HOT DIP GALVANIZED TO IS:277-1985 R Established
107) PIN TENT CARBON STEEL SMALL 8340-000508() IND/GS/1630 (5836/PK) AND ZINCK COATING BY HOTDIP GALVANIZED R Established
108) PLATE HOOK AS PER DRG.NO.SE-232 DET 2() AS PER REQUIREMENT & SPECIFICATION R Established
109) PLATE HOOK FOR CARRIER 6 A/L AS PER DRG.NO. SE 113 DET 13() AS PER REQUIREMENT & SPECIFICATION R Established
110) RUNNER() IND/GS/1817 (5963/PK DT. 15.9.99) ATTACHED DRG. R Established
111) RUNNER ALUMINIUM FOR TENT() AS PER REQUIREMENT & SPECIFICATION R Established
112) RUNNER BRASS() DRG.NO. IND/TC/0655(d) (7695/PK) R Established
113) SHANK STEEL RIBBED (RUST PROOF)() AS PER DRG. ATTACHED TO SPECN. NO.IND/TC/3838(J) (5511/PK DT R Established
114) SHANK STEEL RIBBED RP 1.2 TO 1.4MM FOR BOOTS() IS:10945 - 1984 R Established
115) SPRING CLIP COMPLETE ASSEMBLED WITH LINKWITHOUT STRAP FOR BOX C -18() AS PER DRG. NO. ISV-93 R Established
116) STRENGTHENING PIECE FOR BOX C-18() AS PER DRG. NO. ISV-282 A R Established
117) STRENGTHENING PLATE NO. O GALVANISED FOR PANNEL PGS NO. OO() IND/GS/542 (f) (1023/PK DT. 18.1.02) R Established
118) TENT DEES IRON 25MM X20MM X4MM() IND/GS/1416 R Established
119) TENT PIN ANGLE IRON MEDIUM() AS PER REQUIREMENT & SPECIFICATION R Established
120) BUCKLES ALU. ALLOY. OR ATTACHMENTS QR OR RINGS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
121) BUCKLES BRASS OR ATTACHMENTS QR OR RINGS OR DEES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
122) BUCKLE IRON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
123) DEES STEELS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
124) WASHERS STEELS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
125) HAMMERS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
126) STEEL SQUARES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
127) SPRINGS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Established
128) CHIMNEY SEGMENT OR ELBOW() AS PER REQUIREMENT & SPECIFICATION R Established
129) WING NUT WITH BRACKET() CQA(GS)/US/467 (b) (5986/PK DT. 8.9.2003) R Established
130) HANDLE CLIP FOR BOX C-18() AS PER DRG. NO. ISV-713 R Established
131) BURNER FOR H.S.O.B. AS PER DRG. NO. 5881/P SHEET NO. 6() IND/GS/1691(A) R Established
132) LID ASSEMBLY (ALONG WITH RUBBER GASKET, HINGE & PIN) AS PER DRG. NO. OFB/SK/712, OFB/C/1006 A, 724, () AS PER REQUIREMENT & SPECIFICATION R Established
133) TRADE FABRICATION OF LONG ELBOW IN SIX PIECES JOINTS, CUT COMPONENTS WILL BE PROVIDED BY THE FACTORY() AS PER REQUIREMENT & SPECIFICATION R Established
134) TRADE ASSISTANCE FOR HOT DIP GALVANIZATION OF PIN TENT CARBON STEEL SMALL() HOT DIP GALVANISED TO IS: 4826-1979 R Established
135) TRADE ASSISTANCE FOR HOT DIP GALVANIZATION OF "U-PIN"() SPECN NO. CQA(GS)/US/467(d) R Established
136) TRADE ASSISTANCE FOR HOT DIP GALVANIZATION OF PIN TENT ANGLE IRON MED. MK-II () HOT DIP GALVANISED TO IS:277-1985 4TH REVISON R Established
137) TRADE ASSISTANCE FOR PAINTING OF SKID BOARDS INSIDE FACTORY() IND/GS/1726(B) (7191/PK) R Established
138) LOCKING CLIP 60 MM() AS PER REQUIREMENT & SPECIFICATION R Established
139) FOUR WAY MILD STEEL JOINT() PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Non Established
140) THREE WAY MILD STEEL JOINT WITH BASE PLATE () PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Non Established
141) THREE WAY ROOF POLE MILD STEEL JOINT () PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Non Established
142) TWISTED PINS() PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Non Established
143) ALUMINIUM FRAME COMPLETE PURE EPOXY POWDER COATED BLACK TO MINIMUM 50 MICRON (.05MM) FITTED WITH STRAPS RETAINERS(EYE)() PROV.IND/TC/1550 (7202/PK DT.21.09.13) R Non Established
Category : P
Grade : III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) SADDLE PA UNIVERSAL[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) POLE STANDING ALUMINIUM ALLOY COMPLETE[21]() Specification : Specn. No. IND/GS/1587 R Estab
2) Trade assistance for Final Welding of Short Elbow Door Door Clip Legs Bottom plate and Stay Bars with HSOB Body[21]() Specification : Specn No. IND/GS/1691 (a) R Estab
3) Trade assistance for Fabrication of Hose Union[21]() Specification : IND/GS/1691 (a) R Estab
4) Trade assistance for Fabrication of Adopter Nut[21]() Specification : IND/GS/1691 (a) R Estab
5) Trade assistance for Fabrication of Bend Pipe[21]() Specification : IND/GS/1691 (a) R Estab
6) Trade assistance of Fabrication of Union Nut[21]() Specification : IND/GS/1691 (a) R Estab
7) Trade assistance for Fabrication of Gland Nut[21]() Specification : IND/GS/1691(a) R Estab
8) Trade assistance for Fabrication of M S Pipe[21]() Specification : IND/GS/1691 (a) R Estab
9) TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE STANDING[21]() Specification : SPEC. NO.: IND/GS/1587 R Estab
10) TRADE ASSISTANCE FOR FABRICATION OF PIN SMALL OF POLE STANDING[21]() Specification : SPEC. NO.: IND/GS/1587 R Estab
11) TRADE ASSISTANCE FOR FABRICATION OF PIN LARGE OF POLE STANDING[21]() Specification : SPEC. NO.: IND/GS/1587 R Estab
12) TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE DOOR[21]() Specification : SPEC. NO.: IND/GS/1587 R Estab
13) TRADE ASSISTANCE FOR FABRICATION OF JOINING PIECE OF POLE DOOR[21]() Specification : SPEC. NO.: IND/GS/1587 R Estab
14) TRADE ASSISTANCE FOR FABRICATION OF PIN OF POLE DOOR[21]() Specification : SPEC. NO.: IND/GS/1587 R Estab
15) TRADE ASSISTANCE FOR FABRICATION OF SPIKE OF POLE STANDING[21]() Specification : SPEC. NO.: IND/GS/1587 R Estab
16) Trade Fabrication of Pole Standing Alu Alloy of Tent Arctic medium MK II[21]() Specification : Specn No. IND/GS/1587 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory
Name Specification Use Status
1) "RIVETS COPPER VARIOUS[21]() Specification : AS PER REQUIREMENT AND SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1742 TurboTech Precision Engineering Private Limited
Sy.No.8/2, Honnasandra Village ,Nelamangala Taluk Bangalore Rural District, Karnataka
PIN1 : 562123
Phone No. : 277383
GSTIN : 29AAACT6674J1ZS 		BLRT00461G

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) FUEL PUMP BODY V92S2[62]() Specification : FUEL PUMP BODY to DRG.NO: 3327-20-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
2) GOVERNOR BODY UTD 20[62]() Specification : GOVERNOR BODY to DRG.NO: SB 20-15-601-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
3) FUEL PUMP BODY UTD 20[62]() Specification : FUEL PUMP BODY to DRG. NO: SB 20-27-01-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category :
Grade : Grade III
Size : M
1) Heavy Vehicle Factory
Name Specification Use Status
1) BOOSTER ASSY TO 6206420005[62]() Specification : BOOSTER ASSY TO DRG NO. 176.64.005CB-1CB C Nonestab
2) ROD RH ASSY TO 6206419027[62]() Specification : ROD RH ASSY TO DRG NO. 175.63.010CB-1 C Nonestab
3) PAD TO 6201070149[62]() Specification : PAD TO DRG. NO.188.70.001-1 C Nonestab
Category :
Grade : Grade III
Size : M
1) Engine Factory Avadi
Name Specification Use Status
1) Turbo Compressor Installation() SB 3336-00-11 C Not Estab
Category : P
Grade : III
Size : S
1743 PARMANAND AND SONS
58-59,GEETA NAGAR,NEAR ARY MEDICAL ZINGABAI TAKLI ROAD NAGPUR Maharashtra
PIN1 : 440013
Phone No. : 2535488
GSTIN : 27AIFPK5619J1Z1 		AIFPK5619J

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001610800 PARAFFIN LIQUID GR.1 JSS-9160-05[10]() Specification : SPECN NO. JSS-9160-05 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0133030113 MS PLATE SIZE 450 MM[01]() Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2590000040 LABEL IA 983[25]() Specification : SPECN. NO. IS: 13262-1992 (R.A.1997) C Nonestab
2) 2270463342 PLY WOOD 6 MM[22]() Specification : IS-303 - 1989 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2101773028 TAPE ADHESIVE WP FAB[21]() Specification : IND/ME/790(A R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1565292220 TAPE ADHES TRANSPT 20 MM WIDE[15]() Specification : TAPE ADHESIVE WATER PROOF TRANSPERENT SIZE- 20 MM WIDE SPECNIND / ME / 662 (A) DC 3754 - ME DT. 12-12-02. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1035784100 OIL FURNACE[10]() Specification : FURNACE FUEL OIL HIGH VISCOSITY GRADE SPECN IS:1593-1982(SECOND REVISION). R Nonestab
2) 1035820008 OIL KEROSINE SUPERIOR[10]() Specification : OIL KEROSINE SUPERIOR IS-1459 :1974 (SECOND REVISION)AMENDMENTS 3, REAFFIRMED 2001. R Nonestab
3) 1001729903 THINNER PAINT TURPEN SPIRIT WHITE[10]() Specification : THINNER PAINT (TURPENTINE SUBSTITUTE) AMMN. TO SPECN. NO.JSS 8010-26:2009,(REVISION NO.2) DC NO.3978-ME DT.24.09.2009 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 2556001032 LABEL STICKER FZ B 429[25]() Specification : LABEL STICKER FOR FUZE B 429 WITH OUT ADAPTOR TO DRG NO. CQA(A)/LABEL/1053. DC NO. QA 17416 DT. 21-04-2010 C Nonestab
Category :
Grade : Grade III
Size : S
1744 RFM AUTOMOTIVES
BINOLA GURUGAON jaipur highway GURGAON Haryana
PIN1 : 122413
Phone No. : 7007572950 		AAGCR8498G

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Fabrication of UHMWPE moulding for BRJ front and back plate and UHMWPE moulding for BRJ side plates[21]() Specification : As per enclosure E Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Fabrication of Bullet Resistance Helmet[21]() Specification : As per enclosure E Nonestab
2) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING PASGT MEDIUM() Specification : AS PER ENCLOSURE E Nonestab
3) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING PASGT LARGE() Specification : AS PER ENCLOSURE E Nonestab
4) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING ACH/ MICH MEDIUM() Specification : AS PER ENCLOSURE E Nonestab
5) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING ACH/ MICH LARGE() Specification : AS PER ENCLOSURE E Nonestab
Category :
Grade : Grade III
Size : S
1745 JCT Limited
Village: Chohal, Hoshiarpur, Punjab
PIN1 : 146024
Phone No. : 01882-258780,258781
GSTIN : 03AAACJ6733E1ZZ 		JLDJ00283D

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Cloth Polyester Cotton Disruptive Pattern (250 GSM) for Jungle with Army Logo 152cms() PROV/OCFAV/FABRIC/001(a) R Estab.
2) Fabric Polyester Cotton Blended White For Supply Dropping Parachute – 93 CM() IS:2970(Type2) Blend composition P:C-67:33 as per IS:3416 R Not Estab.
3) Cloth Plain Weave Polyester Viscose Dope Dyed Khaki 138 CM & 150CM() IND/TC/0048(d) & (f) R Not Estab.
4) Fabric 410 G Water Proof Polyester Viscose Dope Dyed Ripstop 148 CM() PROV/S/4369/FWP PV/RIP/TC-11/1(a) R Estab.
5) Fabric Green 205 G Spun Polyester Viscose Blended Dope Dyed 148 CM() PROV/S/4369/FABRIC GREEN PV/TC-11/2(a) R Not Estab.
6) Cloth Plain Weave Polyester Viscose Dope Dyed Darker OG 150 CM() IND/TC/0048(c) & (f) R Not Estab.
7) Cloth Drill Cotton Dark Grey 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Not Estab.
8) Cloth Mercerised Cotton Light OG 142 CM (Minimum) Excluding Selvedges() PROV/OCFAV/Fabric/004 R Estab.
9) Fabric Twill Weave Polyester Cotton Disruptive 150 cm AL() PROV/S/2599/TC-11/2009/01 R Not Estab.
10) Cloth Twill Weave Polyester Cotton Disruptive 250 GSM Greenish Khaki 150 CM() PROV/S/2599/TC-11/2009/02 R Not Estab.
11) Cloth Polyester Cotton Disruptive (220 GSM) with Indian Army Logo() As per Specification & Requirement R Not Estab.
12) Cloth Polyester & Cotton (20:80) Greenish Khaki (250 GSM) 152 CM (Minimum) Excluding Selvedges for Navy() PROV/OCFAV/FABRIC/001(a) without Disruptive Pattern R Not Estab.
13) Cloth Drill Cotton Greenish Khaki 142cm() VARIETY NO.3 OF IS:177-1989 (FOURTH REVISION) REAFFIRMED 2003. R Estab.
14) Cloth Drill Cotton White Bleached 142cm() VARIETY NO. 3 OF IS 177:1989 ( FOURTH REVISION) REAFFIRMED 2003. R Estab.
15) Cloth Cotton Light Blue 142cm() SPECIFICATION: TYPE 2 OF IS:2970-87,REAFFFIRMED 2004 (FIRST REVISION) EXCEPT FOR AIR POROSITY. R Not Estab.
16) Cloth Shirting Polyester Viscose (67:33) Light Blue 148 CM() IAFS 01077:2010. R Not Estab.
17) Cloth Plain Weave Polyester Cotton Deep Brown 150 CM() AIR HQ/DQAS/MG - 082 (REVISED 2004 ) R Not Estab.
18) Cloth Plain Weave Polyester Viscose Dope Dyed Dark Blue Grey 148 CM () AIR HQ/DQAS/AC-053 R Not Estab.
19) Cloth Plain Weave Polyester Viscose Dope Dyed Light Blue 148 CM() IAFS 01030:2015 R Not Estab.
20) Cloth Drill Cotton White Bleached 91 CM() IS: 177-1989 AND (IV TH REV.)RE-AFFIR.1997,V.NO.3 R Estab.
Category : DDP
Grade : I
Size : L
1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges[21]() Specification : Fabric Plain Weave Flame Retardant Blue 150 cm width excluding selvedges. Specification No.1201908/001 R Nonestab
Category : DDP
Grade : I
Size :
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Cloth PW Poly Viscose Dope dyed OG 150cm[21]() IND/TC/0048(g) R Nonestab
Category : dp
Grade : Grade I
Size : L
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Cloth PW Poly Viscose Dope dyed OG 150cm[21]() Specification : As per requirement & Specification R Nonestab
2) 100% NYLON FILAMENT OG[21]() Specification : PROV.SPECIFICATION NO.OCFS/4587/YARN/CUFF STOCKINET R Nonestab
3) Cloth Pol & Cotton 20:80 Disr Pattern 250Gm for Jungle with Army Logo 152cm[21]() Specification : As per requirements & specifications R Nonestab
4) Cloth Polyester & Cotton (20:80) Disruptive Pattern 250 GSM with Indian Air Force Logo 150 cm width (min)[21]() Specification : Specification - SPECIFICATION NO. IAFS 01068:2015AS PER RELEVANT CLAUSE OF SPECIFICATIONAS PER RELEVANT CLAUSE OF SPECIFICATION R Nonestab
5) CLOTH TWILL WEAVE POLYESTER & COTTON(20:80)250GSM GREENISH KHAKI 150 CM WIDTH(MIN)[21]() Specification : PROVISIONAL SPECIFICATION NO. PROV/S/2599/TC-11/2009/02 AS PER RELEVANT CLAUSE OF SPECIFICATION. R Nonestab
6) FABRIC TWILL WEAVE POLY.& COTTON (67:33) DISRUPTIVE PATT. WR 290GSM 150 cm WIDTH(MIN)WITH INDIAN ARMY LOGO[21]() Specification : PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH & R Nonestab
7) FABRIC TWILL WEAVE COTTON AND POLYESTER (80:20) DISRUPTIVE PATTERN WATER REPELLENT 250 GSM 150 cm WIDTH (MINIMUM) WITH INDIAN ARMY LOGO.[21]() Specification : SPECN NO. PROV/S/2599/TC- 11/2009/03,EXCEPT THAT CLAUSE No.8.5 WHICH SHALL BE"AS PER DRAWING PLATE No.OCFS/CAPFS/ARMYLOGO"AND CLAUSE No.16.1 WHICH SHALL BE AS PER SCHEDULE No.CQA(T&C)/PMS/35(d), EXCEPT THAT THE FABRIC SHALL BE SUPPLI R Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) BLENDED FABRIC POLYESTER & COTTON(67:33)[2101221310]() Specification : TYPE 2 OF IS 2970-1987 (RE AFFIRMED 2004) FIRST REVISION EXCEPT TECHNICAL PARTICULARS AS PER ANNEXURE ENCLOSED. R Estab
2) FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE)[2101221228]() Specification : Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other respects not defined in this specification,the material R Estab
3) FABRIC NYLON LT.WT.37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO[2101221981]() Specification : SPECN. NO. IS:4726-1984 R Estab
4) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS[2101221979]() Specification : SPECN NO ADRDE/SPECN/1983/14 R Estab
5) FABRIC COTTON CW 310g OG 91.4 CM.[2101211938]() Specification : JSS: 8305-05 R Estab
6) FABRIC NYLON 370 gm. AIR TEXTURE,DISRUPTIVE PRINTED,PU COATED INSIDE AS PER PARTICULARS[2101221226]() Specification : SPECN-ADRDE/specn/75 & SHADE AS PER SAMPLE RECEIVED FROM ADRDE VIDE LETTER NO.ADRDE/QMS/PG/PAS/CFF/319/P dtd.06-06-12 R Estab
7) DUCK NYLON 230g 91.4cm OG[2101138892]() Specification : SPECIFICATION NO. : ADRDE/SECN/1984/23(a). R Estab
8) FABRIC NYLON LT. WT. 37G RIP STOP WEAVE OLIVE DRAB SHADE NO. 298 AS PER SPECN. 94CM WIDTH[2101221982]() Specification : SPECIFICATION NO.. IS:4726-1984 R Estab
9) FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM.[2101211903]() Specification : SECIFICATION NO. : ADRDE/SPECN/1983/14. R Estab
10) FABRIC COTTON MERCERISED 140 G U/D 136_+4CM.[2101221983]() Specification : SPECN. NO. IS:514.GRADE -1. R Estab
11) FABRIC NY. 109GM ORANGE 120 CM WIDTH[2101221348]() Specification : SPECIFICATION NO.:ADRDE/SPECN/1985/28(C) SHADENO. 592 AS PER BS: 381-1964 AS. R Estab
12) FABRIC NYLON 66, 93g U/D 120 Cm.[2101221251]() Specification : ADRDE/SPECN/2000/53(b) R Estab
13) Cloth Cotton Closely Woven 170 Grms Scoured 91.4 Cms.[2101211560]() Specification : Specn.No.:JSS-8305-5(Variety No.A) (a) Sampling Plan & Criteria for conformity as per CQAT&C/QAI/TC-11/12. R Estab
14) DUCK COTTON 475 GMS O.G. UNPROOFED 91.4 CMS FOR AERONAUTICAL PURPOSE[2101138459]() Specification : SPECIFICATION NO. : IS : 1422-1983. R Estab
15) FABRIC NYLON 109g U/D 91.4cm[2101221160]() Specification : SPECN. NO.: ADRDE/SPECN/1985/28(c). R Estab
16) FABRIC NYLON 58g ORANGE[2101221101]() Specification : SPECN NO.:CIT&C/TC-8/99 R Estab
17) CANVAS NYLON 220g 91.4 cm OG[2101092886]() Specification : SPCN: IND/ADE/0065(a). R Estab
18) COTTON CANVAS 545 GR. O.G. 91.4 CM UNPROOFED VARIETY NO.3[2101126248]() Specification : SPCN. IS:1424-1970. R Estab
Category : p
Grade : Grade I
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON 93GM U/D WIDTH 95 CM[2101221989]() Specification : SPCNS NO.: ADRDE/SPECN/2000/53(b) R Estab
2) FABRIC NYLON ORANGE 37 GM 94 cm WIDTH[2101221988]() Specification : SPECN NO.IS:4726-1984 R Estab
3) FABRIC COTTON CLOSELY WOVEN 235 GMS O.G. 91.4 CMS.[2101211552]() Specification : SPECIFICATION NO. : JSS-8305-5 (V.NO.B). R Estab
4) FABRIC NYLON FOR PARACHUTES TYPE SM 91.4 cms.[2103216031]() Specification : SPECIFICATION NO.: ADRDE/QMS/TDTM/SPECN/97 R Estab
5) CANVAS NYLON 220 GM. 91.4 CMS. UNDYED[2101099890]() Specification : SPECIFICATION NO.: JSS 8305 - 38 : 2015 R Estab
6) FABRIC NYLON 105 GM UNDYED 110 CM.[2101212105]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1993/42 R Estab
7) FABRIC NYLON 185 GM UNDYED 92 CM .[2101211985]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1993/43 R Estab
8) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.[2101221592]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Estab
9) FAB.NYL.66,93 GM.U/DWIDTH 101+-1 CM.(EXCLUDING SELVEDGE)[2101221320]() Specification : SPECN-ADRDE/SPECN/2000/53(b) R Estab
10) FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM.[2101221969]() Specification : SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1) R Estab
11) FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM[2101221970]() Specification : SPECIFICATION : ADRDE/SPECN/2002/56(b) R Estab
12) FABRIC NYLON 52 GMS UNDYED 91.4 CMS.[2101221109]() Specification : SPECIFICATON NO.:-ADRDE/SPECN/1988/32 R Estab
13) FABRIC NYLON 180 GM 94 CM U/D[2101211951]() Specification : 1- LENGTH/ROLL -------- 100 M-----------------IS:1954 2-MASS/SQ.MTR.GM.------180+ -3----------------IS:1964 3-WIDTH CM(MIN) ------94 -----------------IS:1954 4-AIR POROSITY(CU.FT./SQ.FT/SEC)---3-6--------IS:472 R Estab
14) FABRIC COTTON GREY MERCERISED WIDTH 94 CM[2101221967]() Specification : AS PER PARTICULAR =WIDTH=94 CM A.P.35+_5 Cuft/Sqft/Sec at 10"WHP Weight/Sq.Metre=115-117 Gram Thread /cm-Warp-28,WEft-25 Tex of Yarn Tex x Fold-Warp-9.4x2,Weft-9. R Estab
15) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE U/D 95 CM.[2101211947]() Specification : SPECN. NO. : ADRDE/SPECN/1983/14 R Estab
16) DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH[2101142715]() Specification : SPECN.NO.ADRDE/SPECN./1984/23(a) R Estab
Category : p
Grade : Grade I
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON 66, 37 GM U/D 91.4 CM[2101221324]() Specification : SPECN-TECHNICAL PARTICULARS NO.ADRDE/QAC/TECH PART/03/45 DTD.28-01-2003 R Estab
2) FABRIC NYLON 48+-2 GM PLAIN WEAVE U/D 100 CM WIDTH.[2101221254]() Specification : ADRDE/SPECN/2002/56 (b)(VTY.NO.2) R Estab
3) FABRIC NYLON 48 +- 2 GM PLAIN WEAVE ORANGE 100 CM WIDTH.[2101221255]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
4) FABRIC NYLON 48+-2 GM ORANGE 95 CM[2101221992]() Specification : SPECN:ADRDE/specn./2002/56(b) variety NO.2 R Estab
5) DUCK NYLON 230 GM DESRUPTIVE DESIGN 104 CM WIDTH[2101142723]() Specification : ADRDE/SPECN/1984/23(a). R Estab
6) CANVAS NYLON 425 GM GREY 105 CM[2101126375]() Specification : SPECN-ADRDE/SPECN/1984/23(a) R Estab
7) FABRIC NYLON 48+-2gm Plain Weave OG 100cm width[2101221253]() Specification : ADRDE/SPECN./2002/56(b) (VTY.NO.2) R Estab
8) FABRIC NYLON 48+-2gm Plain Weave SAND 100 cm width[2101221256]() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Estab
9) FABRIC NYLON 35 GM U/D WIDTH 94 CM[2101221355]() Specification : AS PER SPECIFICATION R Estab
10) FABRIC NYLON 35 GSM WIDTH 94 CM ORANGE[2101221356]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
11) FABRIC NYLON 35 GSM WIDTH 94 CM SAND COLOR[2101221357]() Specification : ADRDE/QMS/TDTM/SPECN/98. R Estab
12) FABRIC NYLON 35 GSM WIDTH 94 CM OG[2101221358]() Specification : ADRDE/QMS/TDTM/SPECN/98 R Estab
13) FABRIC NYLON 48 + - 2 GMS U/D 95 CMS[2101221990]() Specification : SPECN:ADRDE/SPECN./2002/56(b)VARIETY NO.2 R Estab
14) FABRIC NYLON 48 + -2 GMS OG 95 CMS[2101221991]() Specification : SPECN:ADRDE/specn/2002/56(b) variety NO.2 R Estab
15) FABRIC NYLON 48 + -2 GMS ORANGE 95 CMS[2101221992]() Specification : SPECN:ADRDE/specn./2002/56(b) variety NO.2 R Estab
16) FABRIC NYLON 48 + - 2 GMS SAND 92 CMS[2101221993]() Specification : SPECN:ADRDE/specn/2002/56(b) variety NO.2 R Estab
17) FABRIC COTTON 375 GMS O.G. WATER REPELLANT 90 CMS WIDE (FOR AERONAUTICAL PURPOSES)[2101211990]() Specification : Specn.-IS:2422-1985 Dye fastness to light may be obtained by Carbon arc method also in case Xenon arc is not available. (a)In appearance shade finish and all other respects not defined in this specification, the material shall confor R Estab
Category : p
Grade : Grade I
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON LIGHT WEIGHT 37 GMS UNDYED 94 CMS FOR P.P.[2101221216]() Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading R Estab
2) FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3[2101221295]() Specification : Specification: IS:4726-1984. R Estab
3) FABRIC NYLON 75GM UNDYED 91.4CM[2101212091]() Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur and in addition the R Estab
4) FABRIC NY.109 gms UD/DYED 122CM FOR PARA BOMB105MM[9911035223]() Specification : ADRDE/SPECN/1985/28(c) R Estab
5) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE RED 94 CMS.[2101226094]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1983/14( EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
6) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE SKY BLUE 94 CMS.[2101226095]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14(EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED R Estab
7) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE NAVY BLUE 94 CMS.[2101226194]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14 (EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
8) DUCK NYLON 230 GM.RED 91.4 CMS.[2101138891]() Specification : SPECN-NO:-ADRDE/SPECN/1984/23 (a) R Estab
9) FABRIC NYLON 109 GM ORANGE 91.4 CMS[2101211992]() Specification : SPECN.ADRDE/SPECN/1985/28(C) R Estab
10) FABRIC NYLON 1.5 Oz (52GM) U/D RIP STOP 92 CMS.[2101212092]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1988/32. R Estab
11) FABRIC NYLON 32G U/D 100 CM WIDTH[2101221267]() Specification : SPECN-AS PER PARTICULARS. (a) MASS/MET. :33 GM(MAX) (b)BREAKING STRENGTH(BOTHWAYS) :38 KGF(MIN)TESTING METHOD OF B.S.IS:1969-1968 (c)TEARING STRENGTH(BOTHWAYS) :1.7KGF(MIN) TESTING METHOD OF TEARING STRENGTH IS:4726-1964 R Estab
12) FABRIC NY. 58 G UD 100 CM WIDTH[2101221262]() Specification : AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) R Estab
Category : p
Grade : Grade I
Size : L
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRIC NYLON POLYURETHENE COATED 105 GMS WHITE WIDTH 100 CM[2101221248]() Specification : SPECN NO.: JSS:8305-32:2003 R Estab
2) FABRIC NYLON 230GM U/D 92 CM[2101211991]() Specification : SPECIFICATION NO.- ADRDE/SPECN/1985/29 R Estab
3) FABRIC NYLON LIGHT WEIGHT 37 GMS UNDYED 94 CMS FOR P.P.[2101221216]() Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading R Estab
4) FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3[2101221295]() Specification : Specification: IS:4726-1984. R Estab
5) FABRIC NYLON 75GM UNDYED 91.4CM[2101212091]() Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur and in addition the R Estab
6) FABRIC NY.109 gms UD/DYED 122CM FOR PARA BOMB105MM[9911035223]() Specification : ADRDE/SPECN/1985/28(c) R Estab
7) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE RED 94 CMS.[2101226094]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1983/14( EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
8) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE SKY BLUE 94 CMS.[2101226095]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14(EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED R Estab
9) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE NAVY BLUE 94 CMS.[2101226194]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14 (EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
10) DUCK NYLON 230 GM.RED 91.4 CMS.[2101138891]() Specification : SPECN-NO:-ADRDE/SPECN/1984/23 (a) R Estab
11) FABRIC NYLON 109 GM ORANGE 91.4 CMS[2101211992]() Specification : SPECN.ADRDE/SPECN/1985/28(C) R Estab
12) FABRIC NYLON 1.5 Oz (52GM) U/D RIP STOP 92 CMS.[2101212092]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1988/32. R Estab
13) FABRIC NYLON 32G U/D 100 CM WIDTH[2101221267]() Specification : SPECN-AS PER PARTICULARS. (a) MASS/MET. :33 GM(MAX) (b)BREAKING STRENGTH(BOTHWAYS) :38 KGF(MIN)TESTING METHOD OF B.S.IS:1969-1968 (c)TEARING STRENGTH(BOTHWAYS) :1.7KGF(MIN) TESTING METHOD OF TEARING STRENGTH IS:4726-1964 R Estab
14) FABRIC NY. 58 G UD 100 CM WIDTH[2101221262]() Specification : AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) R Estab
15) FABRIC NYLON LIGHT WEIGHT 37 GMS UNDYED 94 CMS FOR P.P.[2101221216]() Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading R Estab
16) FABRIC NYLON 37GM ORANGE 122CM WIDTH RIP STOP 3X3[2101221295]() Specification : Specification: IS:4726-1984. R Estab
17) FABRIC NYLON 75GM UNDYED 91.4CM[2101212091]() Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur and in addition the R Estab
18) FABRIC NY.109 gms UD/DYED 122CM FOR PARA BOMB105MM[9911035223]() Specification : ADRDE/SPECN/1985/28(c) R Estab
19) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE RED 94 CMS.[2101226094]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1983/14( EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
20) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE SKY BLUE 94 CMS.[2101226095]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14(EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED R Estab
21) FABRIC NYLON LOW POROSITY 52 GMS RIP STOP WEAVE NAVY BLUE 94 CMS.[2101226194]() Specification : SPECIFICATION NO. : ADRDE/SPECN/1983/14 (EXCEPT FOR SHADE) & AS PER ANNEXURE ATTACHED. R Estab
22) DUCK NYLON 230 GM.RED 91.4 CMS.[2101138891]() Specification : SPECN-NO:-ADRDE/SPECN/1984/23 (a) R Estab
23) FABRIC NYLON 109 GM ORANGE 91.4 CMS[2101211992]() Specification : SPECN.ADRDE/SPECN/1985/28(C) R Estab
24) FABRIC NYLON 1.5 Oz (52GM) U/D RIP STOP 92 CMS.[2101212092]() Specification : SPECIFICATION NO.: ADRDE/SPECN/1988/32. R Estab
25) FABRIC NYLON 32G U/D 100 CM WIDTH[2101221267]() Specification : SPECN-AS PER PARTICULARS. (a) MASS/MET. :33 GM(MAX) (b)BREAKING STRENGTH(BOTHWAYS) :38 KGF(MIN)TESTING METHOD OF B.S.IS:1969-1968 (c)TEARING STRENGTH(BOTHWAYS) :1.7KGF(MIN) TESTING METHOD OF TEARING STRENGTH IS:4726-1964 R Estab
26) FABRIC NY. 58 G UD 100 CM WIDTH[2101221262]() Specification : AS PER TECH.PARTICULARS (a) MASS/SQ MET : 58 GM (MAX) (b) BREAKING STRENGTH, BOTH WAYS : 60 KGF (MIN) (c) TEARING STRENGTH, BOTH WAYS : 1.7 KGF (MIN) R Estab
Category : p
Grade : Grade I
Size : L
1746 Indian Armour Systems Pvt. Ltd.
22, Feet Road, Universal Lane Universal Lane Dudhola, Palwal Haryana
PIN1 : 121102
Phone No. : 9811268600
GSTIN : 06AABCI5575Q1ZY 		RTKIO1001A

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Fabrication of BRJ III A Outer Carrier and BRJ III plus Outer Carrier and Jacket Case for 4 magazine and Apron Cotton Navy Blue[21]() Specification : As per attached file. E Nonestab
2) Fabrication of UHMWPE moulding for BRJ front and back plate and UHMWPE moulding for BRJ side plates[21]() Specification : As per enclosure E Nonestab
3) Fabrication of Bullet Resistance Helmet[21]() Specification : As per enclosure E Nonestab
Category :
Grade : Grade III
Size : S
1747 CERAMIST MINERAL CO
2B JADULAL MULLICK ROAD JADULAL MULLICK ROAD KOLKATA West Bengal
PIN1 : 700006
Phone No. : 22593602
GSTIN : 19ALRPS6929C1ZG 		ALRPS6929C

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING[10]() Specification : SYNTHETIC SLAG,BASICITY-(CAO+MGO/SIO2)>3.00,LOW MELTING POINT-1300 DEGREE PACKING -FREE FROM MOISTURE AND PACKED INWATERPROOF BAGS. PROPERTY- SELF-DESSOLVING R Nonestab
Category : p
Grade : Grade III
Size : S
1748 Kaimfin Industries
Village Naryala, Fatehpur Billoch Ballabgarh Faridabad Haryana
PIN1 : 121004
Phone No. : 4007972
GSTIN : 06AEKPB3353B1Z4 		AEKPB3353B

Download 		1) Metal and Steel Factory
Name Specification Use Status
1) PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FREE FM.VISIBLE[20]() Specification : PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FRE S Nonestab
2) PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:7697-37-2) I[10]() Specification : PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS: S Nonestab
3) DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT IN HDPE JARRY[10]() Specification : DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT I S Nonestab
4) SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CAS:497-19-8)[10]() Specification : SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CA S Nonestab
5) SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)[10]() Specification : SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2) S Nonestab
Category : p
Grade : Grade III
Size : S
1749 Ask Fras-le Friction Pvt. Ltd
Plot No-446D, Sector-8, IMT Manesar, Gurugram, Haryana-122050 IMT manesar Gurugram Haryana
PIN1 : 122050
Phone No. : 4396900
GSTIN : 06AAQCA1351D1Z0 		DELA46562F

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) BRAKE LINING WITHOUT CHAMFER TO DRG NO 5047799[90]() Specification : BRAKE LINING WITHOUT CHAMFER TO DRG NO 5047799 C Nonestab
Category :
Grade : Grade III
Size : S
1750 Abhishek Engineers
Shivkamal Ind estate , Sr.no-78/1/1 , Shed no - 02 , Milkat no-808 , Dangat wasti NDA road shivne Pune Maharashtra
PIN1 : 411023
Phone No. : 9890617443 		AAFPL1429F

Download 		1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6334402200 SET A FOR HDC II CONSISTING OF Description : 6334402200 SET A FOR HDC II CONSISTING OF() Specification : SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/11 C Nonestab
Category : p
Grade : 3
Size : S
1751 Ginza Industries Limited
11, Cliverow, 4th Floor, Room No.1A/A, Kolkata, West Bengal
PIN1 : 700001
Phone No. : 9331231250 / 9331231249
GSTIN : 24aabcg0675p1zd 		CALG02796D

Download 		1) Ordnance Clothing Factory Avadi
Name Specification Use Status
1) Polyester Mesh Interlining Fabric OG-142cm width minimum (excluding selvedges)() As per Specification & Requirement R Not Estab.
2) Polyester Round Mesh Interlining Fabric Black 90cm width minimum (excluding selvedges)() As per Specification & Requirement R Not Estab.
Category : DDP
Grade : II
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) TAPE POLYESTER VARIOUS, COLOUR AND WIDTH[21]() Specification : AS PER SPECIFICATION R Nonestab
Category : p
Grade : Grade II
Size : M
1) Ordnance Equipment Factory
Name Specification Use Status
1) TAPE POLYESTER VARIOUS, COLOUR AND WIDTH[21]() Specification : AS PER SPECIFICATION R Nonestab
2) NETTING MOSQUITO various[21]() Specification : As per requirment & specification R Nonestab
3) TAPE ELASTIC VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
4) TAPE NYLON VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
5) TAPE POLYPROPELENE VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Nonestab
Category : p
Grade : Grade II
Size : M
1752 Airen Metals Pvt. Ltd.
Dhakas Tehsil Ramgarh shekhawati Ramgarh shekhawati Ramgarh shekhawati Sikar Rajasthan
PIN1 : 331024
Phone No. : 241015 		JPRA02247A

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Copper Wire Rod 7.9/8.0 mm Dia() As per IS12444-1988 R Estab.
Category : DDP,DP
Grade : II
Size : L
1753 ROCKFORD RUBBERTEXT (INDIA) PRIVATE LIMITED
Plot No: 19, Bacchubhai Indl.Estate, Bidco Naka, Mahin Village, Palghar(West), THANE MAHARASHTRA
PIN1 : 401404
Phone No. : 9272057784
GSTIN : 27AAACR7754B1ZG 		MUMR24340B

Download 		1) Ordnance Factory Medak
Name Specification Use Status
1) ALL TYPES OF RUBBER ITEMS() As per specification C Not Estab
2) SYNTHETIC RUBBER HOSES() - do - C Not Estab
3) EXTRUDED RUBBER PRODUCTS() - do - C Not Estab
4) MOULDED RUBBER PRODUCTS() - do - C Not Estab
5) RUBBER TO METAL BONDED COMPONENTS() - do - C Not Estab
6) SPONGE PRODUCTS LIKE BEEDINGS CORDS etc.,() - do - C Not Estab
Category : P
Grade : I
Size : S
1754 CHW Forge Private Limited
Acheja, PO : Dujana, GT Road, Greater NOIDA [Phase II] UP
PIN1 : 203207
Phone No. : 0120-4186600
GSTIN : 09AAACC6049C1ZX 		AAACC6049C

Download 		1) Heavy Vehicle Factory

[Deemed Registration]
Name Specification Use Status
1) Flanges [All Types][As per Drawing / रेखाचित्र के अनूसार]() As per Drawing / रेखाचित्र के अनूसार E Not Established
2) Hollow Shafts[As per Drawing / रेखाचित्र के अनूसार]() As per Drawing / रेखाचित्र के अनूसार E Not Established
3) Open Die Forgings[As per Drawing / रेखाचित्र के अनूसार]() As per Drawing / रेखाचित्र के अनूसार E Not Established
4) Seamless Ring[As per Drawing / रेखाचित्र के अनूसार]() As per Drawing / रेखाचित्र के अनूसार E Not Established
5) Tube Steel[As per Drawing / रेखाचित्र के अनूसार]() As per Drawing / रेखाचित्र के अनूसार E Not Established
Category : P
Grade : I
Size : M
1) Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) ITEM CODE 9081001012 FORGING BLANK CONVERSION THROUGH RING ROLLING TO DRG NO 5169122D MATERIAL WILL BE SUPPLIED BY GCF Description : ITEM CODE 9081001012 FORGING BLANK CONVERSION THROUGH RING ROLLING TO DRG NO 5169122D MATERIAL WILL BE SUPPLIED BY GCF() Specification : FORGING BLANK (CONVERSION THROUGH RING ROLLING TO DRG NO 5169122D MATERIAL WILL BE SUPPLIED BY GCF ITEM CODE 9081001012 C Estab
Category : p
Grade : 3
Size : L
1) Ordnance Factory Medak

[ENR Registration]
Name Specification Use Status
1) FORGED UPPER RACE RING TO DRG.NO:675-57-276 Description : FORGED UPPER RACE RING TO DRG.NO:675-57-276() Specification : FORGED UPPER RACE RING TO DRG.NO:675-57-276 R Estab
2) STEEL FORGING "RING" TO DRG NO:675-50-299 IN PROOF MACHINED AND HEAT TREATED CONDITION Description : STEEL FORGING "RING" TO DRG NO:675-50-299 IN PROOF MACHINED AND HEAT TREATED CONDITION() Specification : STEEL FORGING "RING" TO DRG NO:675-50-299 IN PROOF MACHINED AND HEAT TREATED CONDITION R Estab
Category : p
Grade : 3
Size : M
1755 ALFA RADIATORS
E 38, SIDCO INDUSTRIAL ESTATE, KURICHI, COIMBATORE TAMIL NADU
PIN1 : 641021
Phone No. : 0422-2679030, 9843042215
GSTIN : 33AAHFA7490H1ZE 		AAHFA7490H

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) OIL COOLER() DRG NO.175.32.001CB-A C Not Established
Category : P
Grade : III
Size : S
1756 Ordnance Factory Kanpur
Unit of AW&EIL, Govt. of India Enterprises, Ministry of Defence, Ordnance Factory Kalpi Road, Kanpur-208009, UP KANPUR UP
PIN1 : 208009
Phone No. : 05122215533 		AAVCA6457D

Download 		1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6262010101 SHELL 105MM IFG HE EMPTY Description : 6262010101 SHELL 105MM IFG HE EMPTY() Specification : SHELL 105MM IFG HE A/L DRAWING PART NO.ISX 46 GE (2-SHEETS) DC NO. 36784-A DATED 20-9-2001 C Estab
Category : p
Grade : 3
Size : L
1757 LAKSHMI INDUSTRIAL WORKS
SHED NO.53 SIDCO INDUSTRIAL ESTATE THIRUMAZHISAI, CHENNAI TAMILNADU
PIN1 : 600124
Phone No. : 044-42131080,09884470470
GSTIN : 33AAAFL7665C1ZJ 		CHEL03554F

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) FORGING FOR SUN GEAR () FG-765-15-5-3 R ESTAB
Category : P
Grade : III
Size : S
1758 APPLIED SYSTEMS
128, SHANTI INDUSTRIAL ESTATE, S.N.ROAD, MULUND(W), MUMBAI, MAHARASHTRA
PIN1 : 400080
Phone No. : 022-25613602,25613592, 9869075111
GSTIN : 27AADPM9602P1Z7 		MUMM17037G

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) CONTROL UNIT BYF-2 TECHNICAL SPECIFICATIONS() DRG.NO.BFY2.000TY C Not Estab.
2) LIGHT INDICATOR PANEL TECHNICAL SPECIFICATIONS() DRG.NO.TC6.000TY C Not Estab.
Category : P
Grade : III
Size : S
1) Opto Electronic Factory
Name Specification Use Status
1) MIL STANDARD DOUBLE SIDED PCB (LF 7441122050)[74]() Specification : MIL STANDARD DOUBLE SIDED PCB AS PER DRG. NO. BPV 29.003 C Estab
2) MIL STANDARD DOUBLE SIDED PCB (LF 7441122051)[74]() Specification : MIL STANDARD DOUBLE SIDED PCB AS PER DRG. NO. BPV 29.001 C Estab
3) DOUBLE SIDED PCB (LF 7441122052)[74]() Specification : DOUBLE SIDED PCB AS PER DRG. NO. BPV 29.004 C Estab
4) MIL STANDARD DOUBLE SIDED PCB (LF 7441122053)[74]() Specification : MIL STANDARD DOUBLE SIDED PCB AS PER DRG. NO. BPV 29.002 C Estab
5) MIL STANDARD DOUBLE SIDED PCB (LF 7441122054)[74]() Specification : MIL STANDARD DOUBLE SIDED PCB AS PER DRG. NO. BPV 29.005 C Estab
Category : p
Grade : Grade I
Size : S
1759 Febwell Engg. Enterprises
24-27, Kirpal Nagar, Vill. Mamidi (Joriyan) Yamuna Nagar Haryana
PIN1 : 135001
Phone No. : 01732-201036
GSTIN : 06AHMPM4468K1ZS 		RTKA04583F

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Steel Cable Drums and reels() As per specification R Estab.
2) All kinds of Mechinical Fabricated items() As per specification R Estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Dumdum
Name Specification Use Status
1) END COVER TO OFDC DRG.NO. SK-2921 SHEET 6 OF 7 IN FINISHED CONDITION FOR TU-1111 MODIFIED[64]() Specification : END COVER TO OFDC DRG.NO. SK-2921 SHEET 6 OF 7 IN FINISHED CONDITION FOR TU-1111 MODIFIED C Nonestab
Category : dp
Grade : Grade III
Size : S
1760 NICHROME
C-1210,RAJ RESIDENCY II,MAHAVIR NAGAR DAHANUKAR WADI,KANDIVALI(W) MUMBAI MAHARASHTRA
PIN1 : 400067
Phone No. : 022-28454562/4876/7380 FAX NO-022-28454562/4876/7380, MOBILE-09819123233
GSTIN : 27AAAFN3882B1ZH 		MUMN11587C

Download 		1) Machine Tool Proto Type Factory
Name Specification Use Status
1) BOAT TAIL ANODISING FROM TRADE () NO.155-1150. Not Estab.
Category : S
Grade : II
Size : S