List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1581 SRI KONARK PRECISION TOOL PVT. LTD.
7-4-156, MADHAVI NAGAR, BEHIND HOTEL SMART FEROZGUDA HYDERABAD TELANGANA
PIN1 : 500011
Phone No. : 040-23079002
GSTIN : 36AACCS8683E1Z2 		HYDS03296G

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) HOUSING REAR SIGHT 1005 007898 Description : HOUSING REAR SIGHT 1005 007898() Specification : HOUSING REAR SIGHT TO DRG ARDE SK 2825/29 DS CAT NO 1005-007898 DC (I) NO. 26548-SA DT.25.11.10 IN FINISHED CONDITION NOTE: IC WILL BE SUPPLIED BY SAF AGAINST BANK GURANTEE C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Cartridge Guide Pawl L Drg No 3602002600 Description : Cartridge Guide Pawl L Drg No 3602002600() Specification : Cartridge Guide Pawl (L), Drg. No. 3602002600, Classment No. 067A, Planche No, B-901 C Estab
2) Cartridge Guide Pawl R Drg No 3602002639 Description : Cartridge Guide Pawl R Drg No 3602002639() Specification : Cartridge Guide Pawl (R), Drg. No. 3602002639, Planche No, A3-4 (Air Version) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Cartridge Guide Pawl L Drg No 3602002626 Description : Cartridge Guide Pawl L Drg No 3602002626() Specification : Cartridge Guide Pawl (L) -067B/1, Drg. No. 3602002626 Classment No. 067B, Planche No. A3-2 C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
2) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 6 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE C Nonestab
2) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]() Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) BRACKET FOR INSAS 5.56 MM[70]() Specification : AS PER DRAWING C Nonestab
2) TRIGGER FOR INSAS 5.56 MM[70]() Specification : AS PER DRAWING C Nonestab
3) BARREL EXTENSION BLANK STAGE-V FOR SMALL ARMS[70]() Specification : AS PER DRAWING C Nonestab
4) HAMMER FOR RIFLE 5.56 MM[70]() Specification : AS PER DRAWING C Nonestab
5) Guide assy. -2 Drg no. AKC-09/2*[70]() Specification : AS PER DRG. C Nonestab
6) Picatiny Rail Drg no. AKC-08/1/2*[70]() Specification : AS PER DRG. C Nonestab
7) Channel left Drg no. AKC-03/6BL[70]() Specification : AS PER DRG. C Nonestab
8) Band Front Sight To DS CAT NO. 5340-016724[70]() Specification : AS PER DRG. C Nonestab
9) Receiver plate left & right Drg no. 1005-007721&10057720[70]() Specification : AS PER DRG. C Nonestab
10) BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08[70]() Specification : BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08 C Nonestab
11) BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN*[70]() Specification : BARREL BLANK FOR ANMOL 32(7.65MM) REVOLVER, DRG. NO. SK-5579R-AN* C Nonestab
12) BIPOD ASSEMBLY FOR LMG 5 56MM[72]() Specification : BIPOD ASSEMBLY(FOR GM 5.56MMIAI) DS CAT 1005-557897 DC(I) NO. 26610-SA DT. 07/03/12 C Nonestab
13) BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016.[70]() Specification : BLADE FORE SIGHT DS CAT NO 1005-000895 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)26911-SA-DT.09-08-2016. C Nonestab
14) BLANK BODY COCKING SLIDE for MAG[37]() Specification : BLANK BODY COCKING SLIDE TO DRG. NO. SKM-899 (IC TO BE SUPPLIED BY FACTORY FROM L.F.0145077020 AGAINST B/G). C Nonestab
15) BLOCK GAS[70]() Specification : BLOCK GAS DRG NO AKC 02/4 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
16) BLOCK REAR BLANK[70]() Specification : BLOCK REAR BLANK TO DRG NO. AKC-03/4BL* FOR CARBINE 5.56MM. C Nonestab
17) BODY BARREL LOCKING CATCH DS CAT 1005-006830[70]() Specification : AS PER DRG DS CAT 1005-006830 C Nonestab
18) BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM[01]() Specification : AS PER DRG. C Nonestab
19) Body ForeSight drg .no. 1005-000896 for Carbine 9mm[70]() Specification : BODY FORE SIGHT DS CAT NO 1005-000896 IN FINISHED CONDITION SMG 9MM CARBINE 1A1.DC(I)20697-SA-DATED-29-03-1990., C Nonestab
20) BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION[70]() Specification : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION C Nonestab
21) Bracket Foresight[70]() Specification : BRACKET FORESIGHT TO DRG NO. AKC-02/5(IN FINISHED CONDITION FOR AMOGH 5.56MM. C Nonestab
22) BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.[70]() Specification : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. C Nonestab
23) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.[70]() Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION. C Nonestab
24) BUSH RETAINING STEM for MAG[70]() Specification : BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 27107-SA DT-21.06.17 C Nonestab
25) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99[70]() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Nonestab
26) BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99[70]() Specification : BUSH STUD TRIGGER PH-5-2 IN FINISHED CONDITION. D.A. NO. 58/99 DT. 23.4.99 C Nonestab
27) BUSH TRIGGER ASSY FOR CARBINE 5 point 56MM IN FINISHED CONDITION[70]() Specification : BUSH TRIGGER ASSY DRG AKC 01/12 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
28) CARRIER RECOIL for MAG[72]() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Nonestab
29) CATCH LOCATING SAFETY CATCH for MAG[70]() Specification : CATCH LOCATING SAFETY CATCH DS CAT NO.1005-000613 DC NO. 27107-SA DT- 21.06.17 IN FINISHED CONDITION. C Nonestab
30) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION[70]() Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION C Nonestab
31) Cradle Sear IN Finished Condition[70]() Specification : CRADLE SEAR DS CAT NO 1005-000918 IN FINISHED CONDITION FOR TRIGGER ASSY OF 9MM CARBINE DC(I) NO.26375-SA, DT. 05-09-07 C Nonestab
32) DISC FORK For MAG[72]() Specification : DISC FORK TO DS CAT NO. 1005-000686 DC(I) NO. 26209-SA DT- 27.5.06. C Nonestab
33) EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016.[70]() Specification : EJECTOR DS CAT NO-1005-000893 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.D C (I) 26911-SA-DATED-09-08-2016. C Nonestab
34) EJECTOR for MAG 7 62MM[70]() Specification : EJECTOR TO DS CAT NO. 1005-000548 DC(I) NO. 27011-SA DT- 14.01.2017 IN FINISHED CONDITION. C Nonestab
35) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.[70]() Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN. C Nonestab
36) EXTRACTOR TO DS CAT NO 5120 007853 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1[70]() Specification : EXTRACTOR TO DS CAT. NO.5120-007853 D C(I) NO-26339-SA DT.21-05-07 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. C Nonestab
37) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04[70]() Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04 C Nonestab
38) FORE SIGHT 1005 007737 IN FINISHED CONDITION[70]() Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16 C Nonestab
39) FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.[70]() Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. C Nonestab
40) FORE SIGHT IN FINISHED CONDITION FOR CARBINE 5 56MM[70]() Specification : FORE SIGHT DRG NO AKC 01/6 IN FINISHED CONDITION. FOR CARBINE 5.56MM C Nonestab
41) FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION.[70]() Specification : FORE SIGHT TO DS CAT NO. 1005-000400 & 1005-000401 DC(I) NO. 25804-SA DT- 16.07.03 IN FINISHED CONDITION. C Nonestab
42) FORK CARRIER for MAG[72]() Specification : FORK CARRIER TO DS CAT NO. 1005-000685 DC(I) NO. 22564-SA DT- 3.6.94 IN FINISHED CONDITION. C Nonestab
43) FRAME TRIGGER for MAG[70]() Specification : FRAME TRIGGER DS CAT NO.1005 - 006602 DC(I)NO.25317-SA DT.03.04.2002 IN FINISHED CONDITION W/O ANODISING. C Nonestab
44) GUIDE ASSEMBLY 1 FOR CARBINE 5 56MM[70]() Specification : GUIDE ASSEMBLY-1 TO DRG NO.AKC-09/3*. FOR CARBINE 5.56MM. C Nonestab
45) GUIDE ASSEMBLY 2 FOR CARBINE 5 56MM[70]() Specification : GUIDE ASSEMBLY-2 TO DRG NO.AKC 09/2*. FOR CARBINE 5.56MM C Nonestab
46) GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION.[70]() Specification : GUIDE COCKING HANDLE TO DS CAT NO.1005-006852 DC(I) 23525-SA DT.14.10.96IN FINISHED CONDITION. C Nonestab
47) Guide piston extension for AMOGH 5 56[70]() Specification : GUIDE PISTON EXTENSION TO DRG NO.AKC-02/3*1(IN FINISHED CONDFOR AMOGH 5.56MM. C Nonestab
48) HOUSING PIVOT for MAG[72]() Specification : HOUSING PIVOT TO DS CAT NO. 1005-000666 DC(I) NO. 26182-SA DT- 03.04.06 IN FINISHED CONDITION. C Nonestab
49) KNOB BARREL LOCKING CATCH IN FINISHED CONDITION. TO DS CAT NO.1005-000529 DC(I)NO.25307-SA DT.26-03-02.[70]() Specification : KNOB BARREL LOCKING CATCH IN FINISHED CONDITION. TO DS CAT NO.1005-000529 DC(I)NO.25307-SA DT.26-03-02. C Nonestab
50) LEG LEFT FRONT ASSEMBLY REQUIRED FOR MOUNTING TRIPOD 7 62MM MGL4A1 OF MAG GUN[72]() Specification : LEG LEFT FRONT ASSEMBLY TO DRG/DS.CAT.NO.1005-000667 IN FINISHED CONDITION (REQUIRED FOR MOUNTING TRIPOD 7.62MM MGL4A1 OF MAG GUN) C Nonestab
51) LEG REAR ASSY for MAG[72]() Specification : LEG REAR ASSY DS CAT NO. 1005-000674 DC(I) NO. 23511-SA DT- 01.10.96 C Nonestab
52) LEVER CLAMPING FRONT LEG ASSY for MAG[72]() Specification : LEVER CLAMPING FRONT LEG ASSY TO DS CAT NO.1005-000668 DC(I) NO.26177-SA DT.22-03-06 IN FINISHED CONDITION. C Nonestab
53) LEVER CLAMPING REAR LEG ASSY for MAG[72]() Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06 C Nonestab
54) LEVER EXTRACTOR FOR REVOLVER[70]() Specification : LEVER EXTRACTOR DRG.NO.PH-1-7 IN FINISHED CONDITION D.A. NO. 05/18 DT. 07-03-18. C Nonestab
55) MOUNTING REAR for MAG[70]() Specification : MOUNTING REAR DS CAT NO 1005-000687 REQUIRED FOR MAG 7.62 MM IN FINISHED CONDITION DC(I) NO. 24463-SA, DT. 12-08-99 C Nonestab
56) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]() Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION C Nonestab
57) NUT PLAIN PRECISION for MAG[70]() Specification : NUT PLAIN PRECISION DS CAT NO 5310-022386 DC(I) NO. 25014 DT. 22.5.2001 IN FINISHED CONDITION REQUIRED AS SPARE OF MAG 7.62MM(MOUNTING TRIPOD) C Nonestab
58) PAWL HAMMER FOR RIFLE 5 56[70]() Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition C Nonestab
59) PAWL GUIDE CARTRIDGE for MAG[70]() Specification : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 27022-SA DT.31.01.17 C Nonestab
60) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.[70]() Specification : PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92. C Nonestab
61) PISTON EXTENSION BLANK FOR CARBINE 5 56MM[70]() Specification : PISTON EXTENSION BLANK TO DRG NO. AKC-07/01BL*1 FOR CARBINE 5.56MM. C Nonestab
62) PIVOT CRADLE FOR MAG[72]() Specification : DS CAT NO. 1005-000641 DC(I) NO. 23097-SA DT- 5.10.95 IN FINISHED CONDITION. C Nonestab
63) PIVOT PIN REAR SIGHT RAMP TO DS CAT NO. 5315-001522 DC(I) NO.25359-SA DT- 10.5.02 IN FINISHED CONDITION.[70]() Specification : PIVOT PIN REAR SIGHT RAMP TO DS CAT NO. 5315-001522 DC(I) NO.25359-SA DT- 10.5.02 IN FINISHED CONDITION. R Nonestab
64) RING SCRAPER FOR MAG[72]() Specification : DS CAT NO. 5365-000390 DC(I) NO. 20194-SA DT- 3.10.88 IN FINISHED CONDITION. C Nonestab
65) RING TRAVERSING MOUNTING TRIPOD FOR MAG[72]() Specification : DSCAT NO. 5365-000395 , DC(I) NO.25604-SA,DT.29-11-02 C Nonestab
66) SEAR AUTO FOR AMOGH CARBINE 5 56[70]() Specification : SEAR AUTO DRG NO AKC 01/11 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
67) SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : SEAR DRG NO AKC 01/10 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Nonestab
68) SEAR TRIPPER FOR MAG[70]() Specification : DRG.DS CAT NO.1005-000620 DC (I) NO.27019-SA DT.28.1.17 IN FINISHED CONDITION. C Nonestab
69) SEAR SK 2689/239 SOFT COND.L5[70]() Specification : SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26524 SA DT-16.07.10., C Nonestab
70) SEATING CRADLE PIVOT ASSY FOR MAG[70]() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Nonestab
71) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.[04]() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Nonestab
72) SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION.[70]() Specification : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION. C Nonestab
Category : DDP,DP
Grade : I
Size :
1) Small Arms Factory
Name Specification Use Status
1) BRACKET FOR INSAS 5.56 MM() AS PER DRAWING C Not Estab.
2) TRIGGER FOR INSAS 5.56 MM() AS PER DRAWING C Not Estab.
3) BARREL EXTENSION BLANK STAGE-V FOR SMALL ARMS() AS PER DRAWING C Not Estab.
4) HAMMER FOR RIFLE 5.56 MM() AS PER DRAWING C Not Estab.
5) Guide assy. -2 Drg no. AKC-09/2*() AS PER DRG. C Non Established
6) Picatiny Rail Drg no. AKC-08/1/2*() AS PER DRG. C Non Established
7) Channel left Drg no. AKC-03/6BL() AS PER DRG. C Non Established
8) Band Front Sight To DS CAT NO. 5340-016724() AS PER DRG. C Non Established
9) Receiver plate left & right Drg no. 1005-007721&10057720() AS PER DRG. C Non Established
Category : DDP,DP
Grade : I
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]() Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7 C Nonestab
2) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]() Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR C Nonestab
Category :
Grade : Grade III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PISTON EXTENSION BLANK Drg. No AKC-07/01 Description : PISTON EXTENSION BLANK Drg. No AKC-07/01() Specification : AS PER DRG C Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.() Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042. C Estab
3) Sear auto carbine Drg. No. AKC-O1/11 Description : Sear auto carbine Drg. No. AKC-O1/11() Specification : AS PER DRG. C Estab
4) FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. Description : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.() Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION. C Estab
5) PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02 Description : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02() Specification : PAWL GUIDE CARTRIDGE DS CAT NO. 1005-006626 DC(I) NO. 25321-SA DT- 8.4.02 C Estab
6) Extractor DSCAT No. 1005-006633 for MAG 7.62MM through MIM process Description : Extractor DSCAT No. 1005-006633 for MAG 7.62MM through MIM process() Specification : As Per Drg. C Estab
7) SEATING CRADLE PIVOT ASSY FOR MAG Description : SEATING CRADLE PIVOT ASSY FOR MAG() Specification : SEATING CRADLE PIVOT ASSY DS CAT NO. 1005-000653,DC(I) NO. 23624-SA DT. 19.12.96 C Estab
8) SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION. Description : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION.() Specification : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION. C Estab
9) MOUNTING TRIPOD 7.62MM MGL 4A1 TO DS CAT NO. 1005-000627 Description : MOUNTING TRIPOD 7.62MM MGL 4A1 TO DS CAT NO. 1005-000627() Specification : AS PER DRG C Estab
10) CARRIER RECOIL for MAG Description : CARRIER RECOIL for MAG() Specification : CARRIER RECOIL TO DS CAT NO.1005-000681 DC(I) NO.22817-SA DT.20-1-95 IN FINISHED CONDITION. C Estab
11) FORK CARRIER for MAG Description : FORK CARRIER for MAG() Specification : FORK CARRIER TO DS CAT NO. 1005-000685 DC(I) NO. 22564-SA DT- 3.6.94 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FRAME TRIGER DS CAT NO.1005-006602 Description : FRAME TRIGER DS CAT NO.1005-006602() Specification : AS PER DRG. C Estab
2) GUIDE PISTON EXTENSION BLANK FOR AMOGH 5.56 MM Description : GUIDE PISTON EXTENSION BLANK FOR AMOGH 5.56 MM() Specification : AS PER DRAWING C Estab
3) Blank for Piston extension Stage-VII drg .no. ASK-4737*4 for LMG/Rifle 5.56mm Description : Blank for Piston extension Stage-VII drg .no. ASK-4737*4 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
4) EXTRACTOR SMALL ARMS CARTRIDGE DRG NO. ARED /SK/2689/250 Description : EXTRACTOR SMALL ARMS CARTRIDGE DRG NO. ARED /SK/2689/250() Specification : AS PER DRG. C Estab
5) HOUSING REAR SIGHT FOR RIFLE 5.56 MM Description : HOUSING REAR SIGHT FOR RIFLE 5.56 MM() Specification : AS PER DRAWING C Estab
6) EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM Description : EJECTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56 MM() Specification : D.S. CAT NO. 1005- 007905 C Estab
7) SEAR SAFETY FOR SMALL ARMS Description : SEAR SAFETY FOR SMALL ARMS() Specification : AS PER DRAWING C Estab
8) Sear as per Drg Description : Sear as per Drg() Specification : AS PER DRG. C Estab
9) Lock Retainer drg .no. ARDE SK-2689/291 / 5340-015159 for LMG/Rifle 5.56mm Description : Lock Retainer drg .no. ARDE SK-2689/291 / 5340-015159 for LMG/Rifle 5.56mm() Specification : AS PER DRG. C Estab
10) LOCK RETAINER IN FINISHED CONDITION Description : LOCK RETAINER IN FINISHED CONDITION() Specification : LOCK RETAINER IN FINISHED CONDN.AS PER DRG. NO.- ARDE/SK-2689/291.DS CAT NO.5340-015159. DC(I) NO-26518-SA DTD-6.07.10. C Estab
11) Trigger ( Carbine) Drg No. AKC-01/8, Description : Trigger ( Carbine) Drg No. AKC-01/8,() Specification : AS PER DRG. C Estab
12) SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION Description : SEAR DRG FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : SEAR DRG NO AKC 01/10 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
13) GUIDE PISTON Drg. No AKC/02/3*1 Description : GUIDE PISTON Drg. No AKC/02/3*1() Specification : AS PER DRG C Estab
14) BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. Description : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION.() Specification : BRACKET CATCH SLEEVE LOCKING BARREL TO DS CAT NO.5340-007585 DC(I) NO.25384-SA DT.4-06-02 IN FINISHED CONDITION. C Estab
15) Cartridge guide Pawl Description : Cartridge guide Pawl() Specification : As Per Drg. C Estab
16) CARTRIDGE GUIDE PAWL DS CAT 1005-006626 Description : CARTRIDGE GUIDE PAWL DS CAT 1005-006626() Specification : AS PER DRG C Estab
Category : p
Grade : 3
Size : S
1582 M/sCADME
No30,1st cross, 1st main, L.G.Rammana Layout Laggere Bengaluru Karnataka
PIN1 : 560058
Phone No. : 0802839139
GSTIN : 29APAPR8403B3Z0 		APAPR84031

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) LOUVER LH TO 6209801477[62]() Specification : PV572.0718.2363 C Nonestab
2) LOUVER RH TO 6209801480[62]() Specification : PV572.0718.2362 C Nonestab
Category :
Grade : Grade III
Size : S
1583 rialto engineering pvt ltd
144/7, 7th floor, Rayala techno park, Old mahabalipuram road, Chennai-41 Old mahabalipuram road Chennai Tamil Nadu
PIN1 : 600041
Phone No. : 9384841774
GSTIN : 33AABCR3365H2ZI 		CHERO6489A

Download 		1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) SELECTOR STOP AS PER DRG No K 1103 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 1103 WITH FIRMS MATERIAL C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) HINGE PIN AS PER Drg No K 4003 WITH FIRMS MATERIAL[70]() Specification : AS PER Drg No K 4003 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) GUARD TRIGGER AS PER DRG No K 1104 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 1104 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Tiruchirapalli
Name Specification Use Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL C Nonestab
2) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL C Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]() Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL E Nonestab
4) FERRULE BUTT TO D S CAT NO 1005 001613 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1207[70]() Specification : AS PER D.S. CAT NO.1005-001613 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1207) C Nonestab
Category :
Grade : Grade III
Size : S
1584 VENVE LIGHT METALS LTD.
FLAT NO.404, BHARATHI BLOCK, VENKATESHWARA HEIGHTS, OPP. HMT NAGAR, NACHARAM, HYDERABAD, ANDHRA PRADESH
PIN1 : 500076
Phone No. : 040-24031930, 09848051893
GSTIN : 36AABCV0195R1ZQ 		HYDV01159E

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) BRACKET() DRG.NO.175.63.054-1/C R NOT ESTABLISHED
2) SPACING SLEEVE() DRG.NO.54.12.022-2A/C C Non Established
3) SPACING SLEEVE() DRG.NO.175.50.009/C C Non Established
Category : S
Grade : III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SPROCKET WHEEL TO 3806414007[38]() Specification : 175.54.004-3/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SLEEVE TO DRG NO BOF 6151786[90]() Specification : SLEEVE TO DRG NO BOF 6151786 C Nonestab
2) 9073200005 CASTING FOR BRACKET TO DRG NO 2A46M 109 82[90]() Specification : CASTING FOR BRACKET TO DRG.NO.2A46M.109-82 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) COVER TO 3806110007[38]() Specification : 172.11.117/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) OUTER DISC TO 3806416089[38]() Specification : 3806416089 R Nonestab
2) INNER DISC TO 3806416090[38]() Specification : 3806416090 R Nonestab
3) FINAL DRIVE COVER LEFT HAND TO 3806404017[38]() Specification : 3806404017 C Nonestab
4) COVER OF FINAL DRIVE RH TO 3806404018[38]() Specification : 175.43.002/C C Nonestab
5) BRACKET CASTING TO 3801201151[38]() Specification : 172.01.735/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SEALING RING[38]() Specification : 172.40.056/C C Nonestab
2) CASTING HOUSING LOWER TO 3806208022[38]() Specification : 172.25.001-1/C C Nonestab
3) EXTERNAL DISK TO 3806416089[38]() Specification : 172.56.008-B/C C Nonestab
4) GUARD SYSTEM TO 3801020018[38]() Specification : 172.20.047-1/C C Nonestab
5) BASE RH HATCH TO 3801210211[38]() Specification : 188.10.220/C C Nonestab
6) 6TH ROAD WHEEL ARM BRACKET RH TO 3806801667[38]() Specification : 172.01.729/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) MANTLET TO 3806205027[38]() Specification : 3806205027 R Nonestab
2) PORT HOLE TO 3801210263[38]() Specification : 3801210263 R Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BODY TO 3801210185[38]() Specification : 188.10.181/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) CASTING CASE TO LF 3806211057[38]() Specification : GOST 2685-75 C Nonestab
2) PROTECTIVE BODY TO LF 3801021158[38]() Specification : GOST 26645-85 C Nonestab
3) COVER OF FINAL DRIVE LH TO LF 3806404017[38]() Specification : 175.43.001/C C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) RIGHT HAND STRAP TO 6201201096[62]() Specification : 184.01.059 C Nonestab
2) RING TO LF 3801041011[38]() Specification : GOST 26645-85 C Nonestab
3) REDUCTION GEAR CASE TO LF 3806402015[38]() Specification : GOST 2685-75 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) BODY DELIVERY PUMP CASTING TO LF 3806407032[38]() Specification : GOST 1412-85 C Nonestab
2) BASE OF BRACKET TO LF 3801021068[38]() Specification : GOST 977-88 C Nonestab
3) CASING CASTING TO LF 3806211058[38]() Specification : GOST 2171 - 90 C Nonestab
4) HOUSING TO LF 3806210114[38]() Specification : GOST 2685-75 C Nonestab
5) SEALING RING TO LF 3806401137[38]() Specification : 54TY-P14-2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FOUR TYPES OF CASTING[02] 1(a) Sand Castings/172 TY-4,GOST 977-88 1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73 2.Investment Castings/172 TY-10, GOST 977-88 3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75 4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.() Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS R Nonestab
Category : p
Grade : Grade III
Size : S
1585 SHARDA FORGING AND STAMPING PRIVATE LIMITED
PLOT NO. 64, SITE-IV, INDUSTRIAL AREA, SAHIBABAD GHAZIABAD Uttar Pradesh
PIN1 : 201010
Phone No. : 4117018
GSTIN : 09AAACS1408D1ZU 		AANPS2410D

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]() Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
2) FORGING FOR CLAMP TRACK T 90 L F NO 6120100102[61]() Specification : FORGING FOR "CLAMP" TO DRAWING NUMBER 172.55.025/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION C Nonestab
3) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]() Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION. C Nonestab
4) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
5) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
6) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS. C Nonestab
7) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
8) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]() Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING. C Nonestab
9) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]() Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89 C Nonestab
Category : ddp
Grade : 3
Size : S
1586 Onkar Udyog
108, IJS PALACE 320, DELHI GATE BAZAR NEW DELHI Delhi
PIN1 : 110002
Phone No. : 23241424
GSTIN : 07AAJPG8083G1ZJ 		DELJ04025A

Download 		1) Ordnance Clothing Factory Shahjahanpur

Debarred
Name Specification Use Status
Category : DDP,DP
Grade : II
Size : S
1587 Anurag Enterprises
3 Johns Mill Jeoni Mandi Agra Uttar Pradesh
PIN1 : 282004
Phone No. : 2622077
GSTIN : 09ABJPA0813D1ZB 		AGRR11031G

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN[14]() Specification : SPECN. NO. JSS-8135-05 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Boxes Fibre Board Rigid Corrugated Triple Wall 7 Ply of Size 700mmx450mmx400mm[21]() Specification : CQA(GS)/US/460 R Estab
Category :
Grade : Grade III
Size : S
1588 M/s Nigam Scientific Works
Plot.no.15, Industrial Area, Phase-2, Chandigarh Industrial Area, Phase -2, Chandigarh Chandigarh
PIN1 : 16002
Phone No. : 2652530
GSTIN : 04ADIPN0175A1Z4 		ADIPN0175A

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Spare Parts, Mechanical Machinery Parts() As per Relevant Supply Order C Estab.
2) Hardware Items() As per Relevant Supply Order R Estab.
3) Die, Jigs & Fixtures() As per Relevant Supply Order C Estab.
Category : DDP,DP
Grade : I,II
Size : S
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) PRESSURE DIE CASTING OF BODY TNPO-170A[70]() Specification : PRESSURE DIE CASTING OF BODY TNPO-170A, DRG. No. B-26/DC/8020251/173 M1 R Estab
2) PRESSURE DIE CASTING OF BOTTOM TNPO-170A[70]() Specification : PRESSURE DIE CASTING OF BOTTOM TNPO-170A, DRG. No. B-26/DC/8040080/174 M3 R Estab
3) PLATE FOR TNP-350B DRG. No. ATS8640016[70]() Specification : PLATE FOR TNP-350B DRG. No. ATS8640016 R Nonestab
4) SET OF TWO COMPONENTS CONSISTING OF BODY AND HOLDER[70]() Specification : SET OF 2 COMPONENTS CONSISTING OF BODY DRG. NO. AU8.020.387 AND HOLDER TO DRG. NO. AU8.636.448 (FOR TNPA-65A) R Nonestab
5) TERMINAL SK 566[70]() Specification : TERMINAL SK 566 SHEET 4/4 R Estab
6) PIN SK 566[70]() Specification : PIN SK 566 SHEET 3/4 R Estab
Category : s
Grade : Grade III
Size :
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) SAND BLASTING ANODIZING PHOSPHATING MASKING PAIINTING OF TNPO 170A (set of 06 components), SETS of TNP-350B, SE-2P, SE-1, TNPT-1, TNP-65A() Specification : SAND BLASTING, ANODIZING/PHOSPHATING, MASKING & PAINTING OF TNPO-170A SET OF 6 COMPONENT (TNPO 170A BODY, BOTTOM, COVER, SHUTTER, ANGLE PIECE LEFT, ANGLE PIECE RIGHT) AS PER DRG. No. AU-8020251, 8040080, 8050073, 8642006, 8010024 & 801002 C Estab
Category : s
Grade : Grade III
Size :
1589 SAARVAM INDUSTRIES LLP
F-2241, RIICO INDUSTRIAL AREA, RAMCHANDRAPURA, SITAPURA EXTENSION JAIPUR Rajasthan
PIN1 : 302022
Phone No. : 9319049499
GSTIN : 08ACLFS9749P1ZU 		ACLFS9749P

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) ASSY OF BEARING SHELL (STD) TO DRG NO. SB 301-82-5 & SB 301-83-5]() Specification : TO DRG NO. SB 301-82-5 & SB 301-83-5] C Estab
2) UPPER & LOWER BEARING SHELL TO DRG NO. SB 301-82 & SB 301-83() Specification : DRG NO. SB 301-82 & SB 301-83 C Estab
3) ASSY OF CONNECTING ROD UPPER & LOWER SHELL (STD) TO DRG NO. SB 3304-25 & SB 3304-26() Specification : DRG NO. SB 3304-25 & SB 3304-26 C Estab
4) FORKED CON ROD SHELL TO DRG NO. 20-04-17-1C() Specification : DRG NO. 20-04-17-1C C Estab
5) ARTICULATED CON ROD SHELL TO DRG NO. 20-04-23-2C() Specification :DRG NO. 20-04-23-2C C Estab
Category :
Grade : Grade III
Size : S
1) Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) UPPER AND LOWER BEARING SHELL Description : UPPER AND LOWER BEARING SHELL() Specification : UPPER & LOWER BEARING SHELL TO DRG NO. SB 301-82-7 & 301-83-7 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS) C Estab
Category : ddp
Grade : 3
Size : S
1590 RASHTRIYA CHEMICALS & FERTILIZERS LTD.
PRIYADARSHINI, EASTERN EXP. HIGHWAY, SION MUMBAI MAHARASHTRA
PIN1 : 400022
Phone No. : 022-25523154
GSTIN : 27AADCK4898C1ZB 		PNER06282D

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) STRONG NITRIC ACID() Specn No-IS:264-2005 IIIrd Rev Reaffirmed 1995 R ESTB.
2) DILUTE NITRIC ACID() Specn No-IND/ME129 DC-3754 ME Dtd-12.12.2002 R ESTB.
3) METHANOL () Specn BF1.19 dtd 06.10.1996 ammended 07.10.2006 R ESTB.
4) AMMONIA ANHYDROUS() Specn No-IS:662/1980 R ESTB.
5) SULPHURIC ACID Minimum 98% Strength() Specn No-IS:266:1993 R ESTB.
6) SODIUM NITRATE percent by mass mini 98% purity() Specn No-IS:12681/1989 R ESTB.
Category : P
Grade : II
Size : L
1591 MOTI TIMBER INDUSTRIES
Khajuri Road Yamuna Nagar HR
PIN1 : 135001
Phone No. : 01732 - 239599
GSTIN : 06AEEPG3213P1ZL 		PTLM12098C

Download 		1) Ordnance Factory Bhandara
Name Specification Use Status
1) Case HEMK-I (Modified) L/A wood() Drg.No. IND/ME/29 R Estab.
2) Box Cartridge LTPE() Drg.No. OFBA/PE/12 Dtd 08.05.01 R Estab.
3) Box C-26 A wood() Drg.No. CIA/AMMN/1773 & IA-948 (a,f) R Estab.
4) Case C-128 MK-13/L() Drg.No. IA-1031 & IA-948 (A,F) R Not Estab.
5) Reel I A/L for package Ammn.79-A() Drg.No. OFBA/CX/54 Dtd 08.04.93 R Not Estab.
6) Crate 5 A/L wire boundfor package Ammn.79A() Drg.No. OFBA/CX/55 Dtd 16.08.94ammended on15.02.02 R Not Estab
Category : DP
Grade : II
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) TIM MANGO PL 125X16MMX1.129MTR UP() Specification : IND/ ME/883(f)(PROV)DC 3754-ME. R Estab
2) TIMBER MANGO PLANKS 125 X 19 MM() Specification : SPECN IND (ME) 883(f) (PROV) DC 3754-ME. R Estab
Category : p
Grade : 3
Size : S
1592 M/S SARKAR PLASTIC WORKS
33, NO. MOIRADANGA ROAD MOIRADANGA ROAD KOLKATA WEST BENGAL
PIN1 : 700036
Phone No. : 9331224865 		AKDPS5263N

Download 		1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) TRANSIT PLUG AS PER SK NO M 7949 Description : TRANSIT PLUG AS PER SK NO M 7949() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1593 AAECS1838H
759/120, LANE NO. 2,DECCAN GYMKHANA, PRABHAT ROAD, Pune Maharashtra
PIN1 : 411004
Phone No. : 25681002
GSTIN : 27AAECS1838H1ZA 		AAECS1838H

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) LF NO 7441121482 SEALED KEY BOARD WITH OMRON ILLUMINATED SWITCH[74]() Specification : LF NO 7441121482 SEALED KEY BOARD WITH OMRON IL LUMINATED SWITCH AS PER SPECN. NO. CDR TI T-90/EL/SKB//02 C Estab
Category :
Grade : Grade III
Size : S
1594 TOOL ROOM & TRAINING CENTRE
Amingaon Industrial Area, North Guwahati Road GUWAHATI ASSAM
PIN1 : 781031
Phone No. : (0361) 2680907 		SHLT00046E

Download 		1) Metal and Steel Factory

[Deemed Registration]
Name Specification Use Status
1) Dies[As per specification/Drawing]() As per specification/Drawing C Not Estab.
Category : P
Grade : II
Size : S
1595 SOUTHERN ENGINEERS
364 SHUKRAWAR PETH, SHIVAJI ROAD PUNE Maharashtra
PIN1 : 411002
Phone No. : 24457712
GSTIN : 27AAPFS5554E1ZU 		AAPFS5554E

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Hex Nut M16 X 2[90]() Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) SHAFT SEAL Pt No X2703600[90]() Specification : SHAFT SEAL C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) FLANGE SCREW HEX[90]() Specification : FLANGE SCREW HEX M16X1.5X40 LONG-GR.12.9 C Nonestab
2) STUD 3 8[90]() Specification : STUD 3/8" F3751015 VI C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HEX HEAD HIGH TENSILE BOLT[90]() Specification : HEX HEAD HIGH TENSILE BOLT M12 x 1.75 x 120 MM TO IS:1364 (PART-1)-8.8-BL C Nonestab
2) PULLEY SWC VTS[90]() Specification : PULLEY-SWC (VTS) DRG./PART NO. X-1501515 SAHE C Nonestab
3) SOCKET HD SCREW IS 2269[90]() Specification : SOCKET HD SCREW M6X16 IS:2269 C Nonestab
4) SPLIT PIN 2 POINT 5 X 25L IS 549[90]() Specification : SPLIT PIN 2.5X25L IS:549 C Nonestab
5) CIRCLIP A14X1 IS 3075[90]() Specification : CIRCLIP A14X1 IS:3075 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) Spg Washer M 14[90]() Specification : SPRING WASHER M14 (VTS) SPRING WASHER M14 TYPE 'B' IS:3063 GALVD/ZINC PLATED WITH YELLOW PASSIVATED C Nonestab
2) Plain Washer m 12[90]() Specification : PLAIN WASHER M12 (102-04) PLAIN WASHER M12 TYPE 'A' IS:2016 (STEEL) GALVD & YELLOW PASSIVATED C Nonestab
3) Set Screw M8X25[90]() Specification : HEX SCREW M8 X25 (102-22) SET SCREW M8 X25 IS-1364-1992 PART-II P.8.8 GALVD & YELLOW PASSIVATED C Nonestab
Category :
Grade : Grade III
Size : S
1596 MOHINDRA ENTERPRISES
OPP GAUSHALA, TANDA ROAD JALANDHAR Punjab
PIN1 : 144004
Phone No. : 5005885
GSTIN : 03AANPB6226A1ZF 		JLDM00040F

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BOLT M12 X 1 point 75 X 95[90]() Specification : BOLT M12 X1.75 X 95, IS-1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED C Nonestab
2) BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8[90]() Specification : BOLT M12 X 1.5 X 125 PART NO.L1011225.IS:1364-92 PT-I P-8.8 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BOLT M10 PART NO L1021009[90]() Specification : BOLT M10 X 45 (102-18) BOLT M10 X 1.5 X 45 (102-18) IS:1364-92 PT-1 P.8.8 GALVD & YELLOW PASSIVATED C Nonestab
2) BOLT M12 PART NO L1011228[90]() Specification : BOLT M12 X 1.75 X 140 BOLT M12 X 1.75 X 140 IS:1364-92 PT-I P-8.8 GALVD & YELLOW PASSIVATED L-1011228 C Nonestab
3) BOLT M12 PART NO L1011210[90]() Specification : BOLT M12 X1.75X 50 BOLT M12 X 1.75 X 50 (VTS) IS:1364-1992 PT-I P.8.8 GALVD & YELLOW PASSIVATED PT.NO. L - 1011210 C Nonestab
4) BOLT M12 PART NO L1011212[90]() Specification : BOLT M12 X 1.75 X 60 BOLT M12 X 1.75 X 60 IS:1364-92 PT-1 P-8.8 GALVD & YELLOW PASSIVATED C Nonestab
5) BOLT M12 PART NO L1011209[90]() Specification : BOLT M12 X 1.75 X 45 BOLT M12 X 1.75 X 45 IS : 1364-1992 PT-I P-8.8 GALVD & YELLOW PASSIVATED C Nonestab
6) BOLT M12 PART NO L1021214[90]() Specification : BOLT M12X1.5X70 BOLT M12X1.5X70 IS:1364-92, PT-I P-8.8 GALVD & YELLOW PASSIVATED DRG./PART NO.L1021214 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Nonestab
2) HEX HEADED BOLT 1/2[90]() Specification : HEX HEADED BOLT 1/2" BSF 1 1/2" HIGH TENSILE BOLT C Nonestab
Category :
Grade : Grade III
Size : S
1597 J.M.MACHINE TOOLS
VILL-KHALIA, P.O-CHAMRAIL (BENARAS ROAD), HOWRAH, WEST BENGAL
PIN1 : 711114
Phone No. : 033 26514320
GSTIN : 19AIIPM2992F2ZV 		CALM08933B

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) Safety lever without nickel plating to Drg no, M-8199 J() AS PER DRG & SPECIFICATION C NOT ESTAB.
Category : P
Grade : III
Size : S
1) Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) CATCH TO D S CAT NO 5340 015119 D C I NO 25471 SA Description : CATCH TO D S CAT NO 5340 015119 D C I NO 25471 SA() Specification : CATCH TO D.S CAT. NO. 5340-015119 D.C (I) NO. 25471-SA C Estab
2) SIGHT GRENADE TO D S CAT NO 1005 001755 IN FINISHED Description : SIGHT GRENADE TO D S CAT NO 1005 001755 IN FINISHED() Specification : AS PER DRAWING C Estab
3) HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION Description : HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION() Specification : HOUSING LEVER SEAR ASSY TO DRG NO PB 8 IN FINISHED CONDITION C Estab
4) LEVER SEAR TO DRG NO M 8202 F PB 16 IN FINISHED CONDITION Description : LEVER SEAR TO DRG NO M 8202 F PB 16 IN FINISHED CONDITION() Specification : LEVER SEAR TO DRG NO M 8202 F PB 16 IN FINISHED CONDITION C Estab
5) CLAW FLUSH DRG DS CAT NO 5340 004209 IN F C Description : CLAW FLUSH DRG DS CAT NO 5340 004209 IN F C() Specification : CLAW FLUSH DRG/DS CAT NO. 5340-004209 IN F/C C Estab
6) FASTENING LUG REAR TO DRG NO F 1303 007490 E FINISHED CONDITION Description : FASTENING LUG REAR TO DRG NO F 1303 007490 E FINISHED CONDITION() Specification : FASTENING LUG REAR TO DRG. NO : F1303-007490 E F/C C Estab
7) ROCKING SHAFT ITEM 4 RGF 10819 98 F C Description : ROCKING SHAFT ITEM 4 RGF 10819 98 F C() Specification : ROCKING SHAFT (ITEM-4) RGF-10819/98 F/C C Estab
Category : p
Grade : 3
Size : S
1598 SADHANA FIBRE GLASS INDUSTRIES
20,MONDAL GANTHI,MAIN ROAD,KAIKHALI VIP, KOLKATA, WEST BENGAL
PIN1 : 700052
Phone No. : 033 25341951
GSTIN : 19AAUFS7206G1ZP 		CALS25027C

Download 		1) Gun and Shell Factory
Name Specification Use Status
1) BIPOD ASSY.FOR 84 MM RL MK-III() AS PER DRG.& SPECIFICATION C NOT ESTAB.
2) COWL OF AK-630() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) SET OF STOCK RT & STOCK LT DRG CTM-0138 & CTM-0137[70]() Specification : AS PER DRAWING C Nonestab
2) Firing Grip 304075993 IN F/C D.C. NO. DC-19401-W[71]() Specification : AS PER DRAWING C Nonestab
Category : P
Grade : III
Size :
1599 M/s Fashion Wear
292, Mahman Shah Shahjahanpur Uttar Pradesh
PIN1 : 242001
Phone No. : 07505679858
GSTIN : 09AIQPM3561N1ZH 		AIQPM3561N

Download 		1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Cap Glacier() As Per Requirements & Specifications E Not Estab
2) Fabrication of Coat ECC imp. Ver.() IND/TC/4587 (C) and Approved sample E Non Established
3) Fabrication of Outer Layer of Coat ECC() IND/TC/4587 or IND/TC/4587(c) and Approved sample C Non Established
4) Fabrication of Waist Coat (Inn.Lay.)() IND/TC/4587 and Approved sample C Non Established
5) Fabrication of Trouser ECC() FABRICATION OF COMPLETE TROUSERS ECC CONFIRMING TO PROV.SPECIFICATION NO.S/3558/A/TC-15/TROUSERS ECC(TWC & TSP) (a)AND APPROVED SAMPLE.AS PER RELEVANT CLAUSE OF SPECIFICATION E Non Established
6) Fabrication of Trouser Wind Cheater() DMSRDE/T&GS/2000/447& Approved Samples E Non Established
7) Fabrication of Coat Combat Disruptive, Detachable with Indian Army Logo() S/2594/CCD Army Logo/TC-15 (a) E Non Established
8) Fabrication of Jacket Wind cheater() As Per Requirements & Specifications E Non Established
9) Fabrication of Jacket Combat PC Dis. with Indian Army Logo() OCFAv/Garment/001(a) & Approved Sample /OCFAv/Garment/001 (b) & Approved Sample E Non Established
10) Fabrication of Trousers Combat PC Dis. With Indian Army Logo() OCFAv/Garment/002 (a) & Approved Sample/ OCFAv/Garment/002 (b) & Approved Sample E Non Established
11) Fab. Of Cap F.S.Disruptive with Indian Army Logo() Prov. SPECIFICATION NO. S/2590/CAP FS Army Logo/TC-15(a) and approved sample E Non Established
12) Trade Fabrication of Jersey Woollen Dark OG/BG Stitching() Trade Fabrication of Jersey Woollen Dark OG/BG Stitching (i) Jersey Cut Components will be provided by OCFS along with Reinforcement Pieces and other Garniture.(ii) Jersey will be Stitched as per provided pattern /scale OCFS. (iii) Other parameters and T& E Non Established
13) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012() IND/TC/4552 (1) & Approved Sample E Non Established
14) Fabrication of Suit Terry Wool BG() AIR HQ/DQAS/AC-042 E Non Established
15) Fabrication of Trouser Terry Wool BG () AIRHQ/DQAS/AC-054, and approved sample E Non Established
16) Fabrication of Comp. Rib Knit Jersey Dark OG() No. S/5257/2009/TC-12 & Annexure – A (Fabrication Component of Jersey Dark OG) E Non Established
Category : DP
Grade : III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]() Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS. E Estab
2) FABRICATION OF BAG WATER PROOF[21]() Specification : FABRICATION OF BAG WATER PROOF AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS. E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRICATION OF COAT ECC IMP VER[21]() Specification : FABRICATION OF COAT ECC IMP VER FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRICATION OF PONCHO GLACIER[21]() Specification : FABRICATION OF PONCHO GLACIER SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I R Estab
2) FABRICATION OF ECAD PARACHUTE COMPLETE WITH PACK[21]() Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33) POLYESTER AND COTTON & 100% POLYESTER TAPE COMPLETE WITH PACK. AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT. NO. 3 AND AS PER SAMPLE HELD WITH OCFS E Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) FABRICATION OF SUIT WINTER[21]() Specification : AS PER RELEVANT CLAUSE OF SPECIFICATION IAFS: 01042:2017 -OCF, SHAHAJAHANPUR E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Cap Balaclava OG (Imp.)[21]() Specification : S/5094/TC-1(b)/CAP BAL OG(IMP) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Shirt Plain weave PV Dope Dyed OG[21]() Specification : IND/TC/4698(b) R Nonestab
2) Fabrication of Trouser Plain weave PV Dope Dyed OG[21]() Specification : IND/TC/4630(m) R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]() Specification : Provisional Specification No. S/2764/OC Army Logo/TC-15 E Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]() Specification : Provisional Specification No. S/2764/OC Army Logo/TC-15 E Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Cap Balaclava OG (Imp.)[21]() Specification : S/5094/TC-1(b)/CAP BAL OG(IMP) R Nonestab
2) FABRICATION OF JCD AND TCD IAL 220 GSM IN SET[17]() Specification : OCFAv/GARMENT/001(c)AND OCFAv/GARMENT/002(c) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 220 GSM INSET E Nonestab
3) FABRICATION OF JCD AND TCD IAL 250 GSM IN SET[17]() Specification : OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Clothing Factory Shahjahanpur
Name Specification Use Status
1) Fabrication of Bag Kit Universal (Mark-II)[21]() Specification : SPCN.-S/2532/Bag Kit Universal OG/TC-6(a) R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRICATION OF PONCHO GLACIER[9911037521]() Specification : As per Drawing/ Technical particulars enclosed R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Parachute Factory
Name Specification Use Status
1) FABRICATION OF 51MM ILLUMINATING PARACHUTE[9911037520]() Specification : AS PER DRAWING/TECHNICAL PARTICULARS E Nonestab
Category : p
Grade : Grade II
Size : S
1600 Guru Nanak Engineers
14, Manohar Park, Rohtak Road New Delhi New Delhi
PIN1 : 110026
Phone No. : 9811144770
GSTIN : 07AARPS3865N1ZO 		DELG17544C

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Drum Steel 1A() Drg. & Specn. No. CIL/3240 (6 Sheet) R Estab.
2) Drum Steel 2A() Drg. No. OCF SK-900 R Estab.
3) Reels Cable Steel 406 mm Flange dia() Drg. No. OCF SK-593C R Estab.
4) Other Metal Reels used in OCFC() As per OCFC specification R Estab.
5) Drum Steel 1A() Drg. & Specn. No. CIL/3240 (6 Sheet) R Estab.
6) Drum Steel 2A() Drg. No. OCF SK-900 R Estab.
7) Reels Cable Steel 406 mm Flange dia() Drg. No. OCF SK-593C R Estab.
8) Other Metal Reels used in OCFC() As per OCFC specification R Estab.
Category : P
Grade : III
Size : S