List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1501 GBS Industries
U-110, Hingna MIDC, Nagpur-440016 Hingna MIDC Nagpur Maharashtra
PIN1 : 440016
Phone No. : 9922172246
GSTIN : 27AAOFG6529J1ZV 		AAOFG6529J

Download 		1) Ordnance Factory Kanpur
Name Specification Use Status
1) Tail Adapter As Per Drg. (Part) No. ITV 47 For Tail Unit 2A[65]() Specification : ITV 47 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ammunition Factory Khadki
Name Specification Use Status
1) SET OF COMPONENTS FOR PYRO CARTRG.[60]() Specification : DRG ERDL 898 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) Machining of 25LBS Bomb Body() As per Drg. & Specification C Not Established
2) Nose Adapter Bush() As per Drg. & Specification C Not Established
3) Base Adapter Bush() As per Drg. & Specification C Not Established
4) Machining of Cylinder() As per Drg. & Specification C Not Established
5) Bush of Base Booster Casing() As per Drg. & Specification C Not Established
6) Adapter Bush() As per Drg. & Specification C Not Established
7) Machining of Lifting Plug() As per Drg. & Specification C Not Established
Category : DP
Grade : I,II
Size : S
1) Grey Iron Foundry
Name Specification Use Status
1) BUSH OF BASE BOOSTER CASING TO DRG NO AAIW BS 0072 2A[08]() Specification : A) COMPONENT WILL BE SUPPLIED BY THE FIRM WITH FIRM MATERIAL B) MATERIAL TEST CERTIFICATE FROM NABL ACCREDIATED LAB SHOULD BE SENT ALONG WITH COMPONENTS. C) INSPECTION BY AAIW, KHAMARIA OR HIS AUTHORIZED REPRESENTATIVE. C Nonestab
Category : DP
Grade : I,II
Size :
1) Ordnance Factory Bhandara
Name Specification Use Status
1) STD CASSETTE CONTAINER[42]() Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) SPECIAL CASSETTE CONTAINER[42]() Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8 R Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Estab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Ambajhari
Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Nonestab
2) COVER FOR DUMMY TRAINING CHARGE 125MM 2527087072[00]() Specification : COVER AS PER DRAWING NO.4-026706 011 FOR DUMMY TRAINING CHARGE 125MM. C Nonestab
Category : ddp
Grade : Grade III
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) CUP YA 5 FOR A30 T DET[65]() Specification : CUP YA-5 FOR A30-T(DET) TO DRG NO. FOR PRIMER DETONATOR A-30-T CQA(A)/AMMN/2856, DC NO-37271.A DT. 08.11.10 SCANNED ON DT DT. 05.01.2011 C Nonestab
2) CAP KG 4 FOR A30 T DETONATOR[65]() Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10 C Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 0133030116 MS PLATE SIZE 1200 MM Description : 0133030116 MS PLATE SIZE 1200 MM() Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE) C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90 Description : BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90() Specification : BOLT,ECCENTRIC ASSY CAT PART NO.14/5306-003416 TO CQA(EE) DRG.CAT.NO.1189K DT.9/4/90 . C Estab
Category : ddp
Grade : 1
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6141156250 TUBE DELAY(4 SECOND) PT.DRG.IQX 943[61]() Specification : TUBE DELAY (FOR 4 SECONDS) DRG.PT.NO. IQX-943,DC-37296-A DT.27.12.2011 C Nonestab
2) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]() Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14. C Nonestab
3) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]() Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL C Nonestab
4) 6270600410 ADAPTER 2 013535 53 D FOR FZ B429[62]() Specification : ADAPTER TO DRG.NO.2-013535/53-OQ-482M,DET.NO.9,DC 36685-A FOR SHELL 130 MM. C Nonestab
5) 6330604400 HOLDER DELAY FOR FZ B429[63]() Specification : DELAY HOLDER TO DRG. NO. 3-016919,53-B-025Y, DET.NO.40 DC-37284-A FOR FUZE B-429 C Nonestab
6) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 P Nonestab
Category : p
Grade : Grade III
Size : S
1502 PRS PERMACEL PRIVATE LIMITED
PLOT NO.PL-11/1, MIDC ADDITIONAL AMBERNATH INDUSTRIAL AREA, AMBERNATH(EAST) , DIST THANE Maharashtra
PIN1 : 421506
Phone No. : 47616666
GSTIN : 27AABCP4401A1Z5 		MUMP17560E

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) WHITE COLOR 8 HARNESS WEAVE HIGH SILICA CLOTH OF ISROSIL GRADE[00]() Specification : WHITE COLOR,8 HARNESS WEAVE HIGH SILICA CLOTH OF ISROSIL GR.WITH MIN.98% SILICA CONTENT & AREAL SHRINKAGE MAX.5% HAVINGTH.0.74MM TO 0.94MM,W1.0 +-0.05M,PH3 MIN.BREAK STGH.WARP7.11KG/CM MIN.& FILL4.28 KG/CM MIN.THRD.ENDS COUNT WARP 48TO56 R Nonestab
Category : p
Grade : Grade III
Size : L
1) Ordnance Factory Bolangir
Name Specification Use Status
1) TAPE ADHESIVE WATER PROOF FABRIC BASE TO SIZE: 50MM WIDE, COLOUR BLACK () IND/ME/790 (a) DC NO.3754- ME, DT.12.12.2002 (EACH ROLL OF 50 MTRS.) C Not Estab
Category : P
Grade : I
Size : M
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Carbon tape 19 mm[77]() Specification : Carbon tape 19 mm C Nonestab
Category : p
Grade : Grade II
Size : M
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91 AND M-92[64]() Specification/Drwaing No. OFN/BMCS/M-91/M-92/BARRIERBAG C Nonestab
Category : p
Grade : Grade II
Size : M
1) Ordnance Factory Nalanda
Name Specification Use Status
1) BARRIER BAG FOR M-91[64]() Specification/Drawing No. OFN/BMCS/M-91/M-92/BARRIER BAG C Nonestab
Category : p
Grade : Grade II
Size : M
1503 VINAYAK INDUSTRIES
55-A DADA NAGAR KANPUR U.P.
PIN1 : 208022
Phone No. : 7071376965
GSTIN : 09AITPM9465A1ZQ 		AITPM9465A

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 Description : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02() Specification : PIVOT FEED LINK TO DS CAT NO. 1005-000461 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIVOT COVER LATCHES SPRING FOR MAG Description : PIVOT COVER LATCHES SPRING FOR MAG() Specification : PIVOT COVER LATCHES SPRING TO DS CAT NO. 1005-000463 DC(I) NO. 25298-SA DT- 19.3.02 (ALUMINIUM ALLOY ROUND 17MM DIA. TO SPECN. DTD- 5124 LF NO. 0614200017 TO BE ISSUED BY SAF AGAINST B/G) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING WHEEL REAR SIGHT FOR JVPC Description : PIN LOCKING WHEEL REAR SIGHT FOR JVPC() Specification : PIN LOCKING WHEEL REAR SIGHT DRG NO. 0204 03 02 00 01 004 00DA FOR JVPC 5.56MM C Estab
2) PIN LOCKING PLUNGER BUTT LOCK FOR JVPC Description : PIN LOCKING PLUNGER BUTT LOCK FOR JVPC() Specification : PIN LOCKING PLUNGER BUTT LOCK FOR JVPC 5.56 MM AS PER DRAW. NO.(0204 03 02 03 22 004 00DC) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING HAND GUARD Description : PIN LOCKING HAND GUARD() Specification : C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet snap head Block rear Description : Rivet snap head Block rear() Specification : Rivet snap head Block rear To DRG No. AKC-03/16* Required for Carbine 5.56 MM C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Spanner Single Ended Size 18 mm Description : Spanner Single Ended Size 18 mm() Specification : SPANNER SINGLE ENDED. SIZE-18 MM SE 18 IS: 5167 MAKE-EVEREST/TAPARIA/JHALANI. C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front Description : Rivet Flat Head for Housing Body Barrel Extension and Bracket Front() Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN FIXING SWIRAL BUTT FOR REVOLVER .32() ÄS PER DRAWING C Estab.
2) BUTT SCREW PIN FIXING BARREL FOR REVOLVER .32"() AS PER DRAWING C Estab.
3) SCREW PLATE BODY FOR REVOLVER .32() ÄS PER DRAWING C Estab.
4) STUD HAMMER FOR REVOLVER .32() ÄS PER DRAWING C Estab.
5) PIN FIXING BARREL FOR REVOLVER .32() ÄS PER DRAWING C Estab.
6) PIN HINGE COVER FOR AMOGH 5.56 MM() AS PER DRAWING C Estab.
7) PIN HAMMER FOR AMOGH 5.56 MM() AS PER DRAWING C Estab.
8) PIN LEVER CHANGE FOR AMOGH 5.56 MM() AS PER DRAWING C Estab.
Category : P
Grade : III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) PIN FIXING SWIRAL BUTT FOR REVOLVER .32[70]() Specification : ÄS PER DRAWING C Estab
2) SCREW PLATE BODY FOR REVOLVER .32[70]() Specification : ÄS PER DRAWING C Estab
3) STUD HAMMER FOR REVOLVER .32[70]() Specification : ÄS PER DRAWING C Estab
4) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION[70]() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Estab
5) PIN HINGE COVER FOR AMOGH 5.56 MM[70]() Specification : AS PER DRAWING C Estab
6) PIN HAMMER FOR AMOGH 5.56 MM[70]() Specification : AS PER DRAWING C Estab
7) PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN LEVER CHANGE TO DRG NO.AKC-10/5 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
8) Blank for Ring CAP for Carbine 9mm[01]() Specification : BLANK FOR RING CAP TO DRG.NO-SK-5183*.D.A. NO. 04/17 DT. 18.01.17 C Estab
9) Adopter for Cleaning of Bore by pull Through[70]() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
10) PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56[70]() Specification : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD TO DS CAT NO. 5315-009191 D.C.NO.26501-SA DT. 08.05.2010 IN FINISHED CONDITION. C Estab
11) PLUNGER DS CAT NO 1005 007901 IN FINISHED CONDITION FOR LMG 5 56[70]() Specification : PLUNGER TO DRG. NO. ARDE SK- 2825/34,DS CAT NO. 1005-007901 DC(I) NO. 26954-SA, DT. 04/10/16 IN FINISHED CONDITION C Estab
12) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56[70]() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Estab
13) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56[70]() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
14) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16[70]() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
15) Pin straight headless for extractor to DS CAT NO 5315 009195[70]() Specification : PIN STRAIGHT HEADLESS FOR EXTRACTOR TO DRG. NO-ARDE/SK 2689/71. DS CAT NO-5315-009195.DC(I)NO-26930-SA DT-06.09.16 C Estab
16) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56[70]() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
17) SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007[70]() Specification : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 C Estab
18) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.[70]() Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. R Estab
19) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.[70]() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
20) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.[70]() Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07. C Estab
21) PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION[70]() Specification : PLUNGER LOCK COVER DRG NO AKC 01/7 FOR CARBINE 5.56 MM IN FINISHED CONDITION C Estab
22) PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM[70]() Specification : PLUNGER LEVER CHANGE TO DRG NO.AKC-10/4 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
23) BUSH TRIGGER ASSY FOR CARBINE 5 point 56MM IN FINISHED CONDITION[70]() Specification : BUSH TRIGGER ASSY DRG AKC 01/12 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
24) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM[70]() Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION. C Estab
25) PIN HINGE COVER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN HINGE COVER DRG NO AKC 01/15 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
26) PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : PIN HAMMER DRG NO AKC 01/16 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
27) PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION[70]() Specification : PIN HINGE CONNECTOR BUTT DRG NO AKC 01/17 FOR CARBINE 5.56MMIN FINISHED CONDITION. C Estab
28) SPACER STEPPED IN FINISHED CONDITION FOR CARBINE 5 56[70]() Specification : SPACER STEPPED TO DS CAT NO. 5365-010491 DC(I) NO. 26935-SA DT- 07.09.2016 IN FINISHED CONDITION. C Estab
29) RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION[70]() Specification : RIVET SPACER DRG NO AKC 03/9 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
30) PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05[70]() Specification : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 C Estab
31) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99[70]() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
32) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99[70]() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
33) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99[70]() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
34) SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION[70]() Specification : SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 C Estab
35) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99[70]() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
36) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99[70]() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
37) BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION[70]() Specification : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION C Estab
38) PLUNGER CATCH FOR MAG[70]() Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
39) ROLLER GUIDE FEED SLIDE UPPER FOR MAG[70]() Specification : DS CAT NO. 3120-004658, DC NO.27108-SA,DT.23-06-17 IN FINISHED CONDITION (MATL.ST ROD.10 MM DIA WILL BE SUPPLIED BY S.A.F.ON B/G FROM L.F.NO.0352001010AS PER DRG.AS PER DRG. C Estab
40) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG[70]() Specification : DS CAT NO. 1005-000460 DC(NO.) 25298-SA DT-19.3.2002 IN FINISHED CONDITION. C Estab
41) RING FRONT MOUNTING BUSH FOR MAG[70]() Specification : DS CAT NO. 3120-004655 DC(I) NO. 27108-SA DT-23.06.2017 IN FINISHED CONDITION. C Estab
42) BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.[70]() Specification : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. C Estab
43) RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.[70]() Specification : RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION. C Estab
44) SPLIT PIN SOLID HALF LINK PART NO B 32 EC[70]() Specification : DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION C Estab
45) WASHER PLUG FOR MAG[70]() Specification : DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
46) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.[70]() Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.) C Estab
47) BUSH RETAINING STEM for MAG[70]() Specification : BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 27107-SA DT-21.06.17 C Estab
48) SLEEVE LOCK PIN HEADED FOR MAG[70]() Specification : DS CAT NO. 1005-006846 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
49) PIN AUTO SEAR FOR JVPC[70]() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB C Estab
Category : P
Grade : III
Size :
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Pin Locking Butt Arms for JVPC Description : Pin Locking Butt Arms for JVPC() Specification : Pin Locking Butt Arms for JVPC 5.56MM as per drawing No. (0204-03-04-00-03-007-00DA) C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) WASHER BRAZING BUSH FOR MAG Description : WASHER BRAZING BUSH FOR MAG() Specification : S CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LEVER LOCKING GAS CYLINDER FOR JVPC Description : PIN LEVER LOCKING GAS CYLINDER FOR JVPC() Specification : PIN LEVER LOCKING GAS CYLINDER FOR JVPC DRG NO. 0204-03-04-01-13-002-00DA C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN COCKING BRACKET FOR JVPC Description : PIN COCKING BRACKET FOR JVPC() Specification : PIN COCKING BRACKET FOR FOR JVPC 5.56MM AS PER DRAWING NO. (0204-03-04-11-18-005-00DA) C Estab
2) PIN GAS BLOCK AND BRACKET FORE SIGHT FOR JVPC Description : PIN GAS BLOCK AND BRACKET FORE SIGHT FOR JVPC() Specification : PIN GAS BLOCK & BRACKET FORE SIGHT FOR JVPC 5.56 MM AS PER DRAWING (204-03-04-11-18-006-00DA) C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) DETENT STUD COCKING SLIDE FOR MAG Description : DETENT STUD COCKING SLIDE FOR MAG() Specification : DETENT STUD, COCKING SLIDE TO DS CAT NO. 5307-004452 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM Description : BODY CATCH DS CAT NO. 1005-000441 FOR MAG 7.62 MM() Specification : AS PER DRG. C Estab
2) Blank for Ring Cap Drg No. SK-5183 Description : Blank for Ring Cap Drg No. SK-5183() Specification : AS PER DRG. C Estab
3) Adopter for Cleaning of Bore by pull Through Description : Adopter for Cleaning of Bore by pull Through() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
4) PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56 Description : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD IN FINISHED CONDITION FOR FOR RIFLE 5 56() Specification : PIN GROOVED HEADLESS LOCKING CUP HAND GUARD TO DS CAT NO. 5315-009191 D.C.NO.26501-SA DT. 08.05.2010 IN FINISHED CONDITION. C Estab
5) PLUNGER DRG NO.ARDE SK 2825/34 Description : PLUNGER DRG NO.ARDE SK 2825/34() Specification : AS PER DRG. C Estab
6) PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56 Description : PLUNGER PLATE SHOULDER REST IN FINISHED CONDITION FOR LMG 5 56() Specification : PLUNGER PLATE SHOULDER REST TO DRG NO-ARDE/SK-2825/53 IN FINISHED CONDITION.DS DAT.NO.-1005-007902 DC(I) NO. 26950-SA,DTD.27.09.16 C Estab
7) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
8) SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56 Description : SCREW SHOULDER FOR LOCK RETAINER IN FINISHED CONDITION AMOGH CARBINE 5 56() Specification : SCREW SHOULDER FOR LOCK RETAINER IN F/D CONDN. TO DS CAT NO.5305-017838 DC(I) NO.26925-SA DT.01-09-16 C Estab
9) Screw special DRG. No. 5305-095385 Description : Screw special DRG. No. 5305-095385() Specification : As per Drg. C Estab
10) NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 Description : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16() Specification : NUT PLUG GAS TO DRG NO. ARDE SK-3145/31,DSCAT NO.5310-024601 IN FINISHED CONDITION , DC(I)NO. 26973-SA , DT. 21-11-16 C Estab
11) PIN STRAIGHT HEADLESS FOR EXTRACTOR FOR INSAS 5.56 MM Description : PIN STRAIGHT HEADLESS FOR EXTRACTOR FOR INSAS 5.56 MM() Specification : ARDE SK 2689/71 C Estab
12) RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : RETAINER IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : RETAINER TO DRG.NO.ARDE SK-2689/90 IN FINISHED CONDITION. DS CAT NO.1005-007824 DC(I)NO.26547-SA DT.24.11.2010 C Estab
13) SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 Description : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007() Specification : SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 C Estab
14) PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. Description : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16.() Specification : PIN FIXING BUTT PIN,D S CAT NO-5315-009114 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1 DC(I)-26909-SA DT.05-08-16. C Estab
15) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. Description : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
16) PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07. Description : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07.() Specification : PIN D S CAT NO-5315-002013 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-07. C Estab
17) PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION Description : PLUNGER LOCK COVER FOR CARBINE 5 56 MM IN FINISHED CONDITION() Specification : PLUNGER LOCK COVER DRG NO AKC 01/7 FOR CARBINE 5.56 MM IN FINISHED CONDITION C Estab
18) PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM Description : PLUNGER LEVER CHANGE FOR CARBINE 5 56 MM() Specification : PLUNGER LEVER CHANGE TO DRG NO.AKC-10/4 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
19) PLUNGER HOD FOR CARBINE 5 56 MM Description : PLUNGER HOD FOR CARBINE 5 56 MM() Specification : PLUNGER HOD TO DRG NO.AKC-08/5 FOR CARBINE5.56MM IN FINISHED CONDITION C Estab
20) BUSH TRIGGER ASSY FOR CARBINE 5 point 56MM IN FINISHED CONDITION Description : BUSH TRIGGER ASSY FOR CARBINE 5 point 56MM IN FINISHED CONDITION() Specification : BUSH TRIGGER ASSY DRG AKC 01/12 FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
21) PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM Description : PIN TRIGGER AND SAFETY SEAR IN FINISHED CONDITION FOR CARBINE 5 56 MM() Specification : PIN TRIGGER & SAFETY SEAR DRG NO AKC 01/13*FOR CARBINE 5.56 MM IN FINISHED CONDITION. C Estab
22) PIN HINGE COVER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN HINGE COVER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN HINGE COVER DRG NO AKC 01/15 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
23) PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN HAMMER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN HAMMER DRG NO AKC 01/16 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
24) PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION Description : PIN HINGE CONNECTOR BUTT FOR CARBINE 5 56MMIN FINISHED CONDITION() Specification : PIN HINGE CONNECTOR BUTT DRG NO AKC 01/17 FOR CARBINE 5.56MMIN FINISHED CONDITION. C Estab
25) RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : RIVET SPACER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : RIVET SPACER DRG NO AKC 03/9 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
26) PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 Description : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05() Specification : PIN STOP DRG.NO-PH-MK-II-1-31 IN FINISHED CONDITION OF 32" REVOLVER MK-II.D.A. NO. 108/05 DT 16.12.05 C Estab
27) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION Description : PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Estab
28) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
29) BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 Description : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99() Specification : BUSH STUD HAMMER, DRG. NO. PH-5-3 IN FINISHED CONDITION D.A. NO. 84/99 DT. 29.6.99 C Estab
30) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Description : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99() Specification : PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 C Estab
31) SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION Description : SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION() Specification : SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 C Estab
32) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Description : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99() Specification : STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 C Estab
33) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Description : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99() Specification : STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 C Estab
34) BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION Description : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION() Specification : BODY SAFTY CATCH DS CAT NO.-1005-006848 DC(I) NO. 25343 SA DT. 26-04-02 IN FINISH CONDITION C Estab
35) PLUNGER CATCH FOR MAG Description : PLUNGER CATCH FOR MAG() Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
36) ROLLER GUIDE FEED SLIDE LOWER FOR MAG Description : ROLLER GUIDE FEED SLIDE LOWER FOR MAG() Specification : DS CAT NO.3120-004657 IN FINISHED CONDITION DC NO. 25298-SA , DT.19-03-02 (MAT.ST.RD.10 MM DIA GD.535A99 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0352001010 C Estab
37) PIVOT COVER SLIDE GUIDE ROLLER FOR MAG Description : PIVOT COVER SLIDE GUIDE ROLLER FOR MAG() Specification : DS CAT NO. 1005-000460 DC(NO.) 25298-SA DT-19.3.2002 IN FINISHED CONDITION. C Estab
38) RING FRONT MOUNTING BUSH FOR MAG Description : RING FRONT MOUNTING BUSH FOR MAG() Specification : DS CAT NO. 3120-004655 DC(I) NO. 27108-SA DT-23.06.2017 IN FINISHED CONDITION. C Estab
39) BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. Description : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION.() Specification : BRAKING CONE TO DS CAT NO. 1005-000574 DC NO. 25307-SA DT- 26.3.02 IN FINISHED CONDITION. C Estab
40) RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION. Description : RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION.() Specification : RIVET BACK SIGHT BRACKET PT.NO.1025 S TO DS CAT NO. 5320 - 000943 DC NO. 25374-SA DT- 27.5.02 IN FINISHED CONDITION. C Estab
41) STOP PIN DETENT COCKI.SLIDE MAG 7.62MM Description : STOP PIN DETENT COCKI.SLIDE MAG 7.62MM() Specification : AS PER DRG. C Estab
42) SPLIT PIN SOLID HALF LINK PART NO B 32 EC Description : SPLIT PIN SOLID HALF LINK PART NO B 32 EC() Specification : DS CAT NO. 5315-001524 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION C Estab
43) WASHER PLUG FOR MAG Description : WASHER PLUG FOR MAG() Specification : DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
44) CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. Description : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING.() Specification : CATCH, BUFFER BODY DS CAT NO. 1005-006646 DC(I) NO. 26667-SA DT- 08/03/13 IN WITH OUT ANODIZING. ( MATL.AL.FLAT 115X12MM FROM L.F.NO.0611530090 WILL BE SUPPL IED BY SAF ON B/G.) C Estab
45) BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 25338-SA DT-23.4.02 Description : BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 25338-SA DT-23.4.02() Specification : BUSH, RETAINING STEM TO DS CAT NO. 1005-006842 DC(I) NO. 25338-SA DT-23.4.02 C Estab
46) SLEEVE LOCK PIN HEADED FOR MAG Description : SLEEVE LOCK PIN HEADED FOR MAG() Specification : DS CAT NO. 1005-006846 DC(I) NO. 27019-SA DT- 28.01.17 IN FINISHED CONDITION. C Estab
47) PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIN LEVER CHANGE FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIN LEVER CHANGE TO DRG NO.AKC-10/5 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
48) PLUNGER FOR AMOGH CARBINE 5 56 Description : PLUNGER FOR AMOGH CARBINE 5 56() Specification : PLUNGER TO DRG. NO. ARDE SK 2689/87.IN FINISHED CONDITION DS CAT NO-1005-007827. DC(I)26547-SA,DTD-24.11.2010 C Estab
Category : p
Grade : 3
Size : S
1) Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF610 mm TO 914 mm WIDTH AND DIA OF ROLLS 450 mm TO 600 mm.SPECN.JSS 9310-03() Specification : JSS 9310-03 :2010 R Estab
2) CARTON FOR 12 BORE PAPER 2.1/2"() Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi) R Estab
Category : p
Grade : 3
Size : S
1504 Global Trading Corporation
45 Tollygunge Circular Road, Second Floor, Kolkata West Bengal
PIN1 : 700053
Phone No. : 24000388
GSTIN : 19ACHPJ1510F1Z1 		ACHPJ1510F

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB[62]() Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB) C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 0101012130 SEAL TO DRG NO. 6390 155 RE 1[01]() Specification : SPECN NO. IS-5872-1990 C Nonestab
2) 6473200483 O RING (MOD) FOR 155MM ERFB BB[64]() Specification : SPECN. NO. IND/ME/914 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]() Specification : SPECN.NO. CQA(A) 2804 C Nonestab
2) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117[65]() Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]() Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 6356000009 FRP PACKAGE BOX FOR INFL MINE MK II[63]() Specification : FRP PACKAGE BOX TO ARDE DRG.NO.9707 00 03 00 01 000 00TA FORINFLUENCE MINE MK-II. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Equipment Factory Hazaratpur
Name Specification Use Status
1) RUBBER STUD ROUND BLACK() AS PER SPECIFICATION E NOT ESTABLISHED
Category : DDP,DP
Grade : I
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) CAP AND LOCK BOTTOM F1301 905060 P 2013998518 Description : CAP AND LOCK BOTTOM F1301 905060 P 2013998518() Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91 R Nonestab
Category : p
Grade : 3
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) PLASTIC CONTAINER FOR AMK339 AS PER HAPP DRAWING NO.H AMK 125 1 126 REV 0[14]() Specification : HIGH DENSITY POLYTHENE TO SPEC JSS 9330-03:2007(TYPE 2) IN ORANGE COLOUR, (GASKET)-NEOPRENE RUBBER TO SPEC IND/ME/884 (PROV), (CUSHION PAD BOTTOM & TOP)-SPONGE RUBBER TO SPEC IND/ME/645 (PROV) E Nonestab
Category : p
Grade : Grade II
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB Description : 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB() Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB) C Estab
Category : s
Grade : 3
Size : S
1505 INSTRUMECH
5, RAJANI MUKHERJEE ROAD KOLKATA 700038 5, RAJANI MUKHERJEE ROAD KOLKATA-700038 KOLKATA West Bengal
PIN1 : 700038
Phone No. : 24031012
GSTIN : 19ALQPS6148C1ZM 		CALP08122C

Download 		1) Gun Carriage Factory
Name Specification Use Status
1) SOCKET HAND SPIKE (FOR TRAIL LEFT ASSY) TO DRG. NO. 1015-000735[91]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SHACKLE 4030 00093 FOR APPARATUS[90]() Specification : SHACKLE 4030-00093 FOR APPARATUS TO DRG NO DS CAT-4030-000493 C Nonestab
2) SHACKLE D6P TA 720802DRG 4030 000373[90]() Specification : SHACKLE D6P TA 720802 DRG 4030-000373 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) BOSS TO DS CAT NO 3040-003304 CONNECTING LINK RIGID TO DS[90]() Specification : BOSS TO DS CAT NO 3040-003304 CONNECTING LINK RIGID TO DS C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210[90]() Specification : DEFLECTION PLATE ASSY TO DRG NO 675 51 cd 142 Cb ALONG WITH DETAILS DEFLECTION PLATE LAYOUT TO DRG NO 675 51 209 675 51 210 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) KEY AMMUNITION TO DRG 4925 000482[90]() Specification : KEY AMMUNITION TO DRG 4925 000482 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) ROD PISTON TO DRG NO BOF 4020756[90]() Specification : ROD PISTON TO DRG. NO BOF-4020756 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SPANNER RING 51A CAT NO 5120 003896 0004[90]() Specification : SPANNER RING 51A CAT NO 5120 003896 0004 C Nonestab
2) SPANNER RING 52A PT NO 5120 003897[90]() Specification : SPANNER RING 52A PT NO 5120 003897 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) HANDLE BOF 6002332[90]() Specification : HANDLE BOF 6002332 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) JOINT BALL REAR TO D S CAT NO M2 1010 000626 P T NO IAN 340SA ALONG WITH ALL DETAILS[90]() Specification : JOINT BALL REAR TO D. S. CAT. NO. M2/1010- 000626/ P. T. NO. IAN- 340SA ALONG WITH ALL DETAILS C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) STRAP SECUREING BORE CLEANING BRUSH ROD TO DRG NO BOF 6003501 8[90]() Specification : STRAP SECUREING BORE CLEANING BRUSH ROD TO DRG NO BOF-6003501-8 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) ADAPTOR FUNNEL TO DRG NO 4933 000052[90]() Specification : ADAPTOR FUNNEL TO DRG. NO. 4933-000052 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SPANNER RING 51A CAT NO 5120 003896 0004[90]() Specification : SPANNER RING 51A CAT NO 5120 003896 0004 C Nonestab
2) SPANNER RING 52A PT NO 5120 003897[90]() Specification : SPANNER RING 52A PT NO 5120 003897 C Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) ARM RANGE NO 3 MK1 M1 AS PER DRG NO CII 267 2 SHEETS CII 247 SHEET 3[74]() Specification : ARM,RANGE NO.3 MK1(M-1) AS PER DRG. NO.-CII-267(2 SHEETS) & CII-247 SHEET-3. C Nonestab
2) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 CII 253 2[74]() Specification : ARC, BEARING NO.3 MK 1(M-I) AS PER DRG.NO.: CII-253 COMPRISING WITH CII-253/1 & CII-253/2 C Nonestab
3) ARM RANGE NO 5 MK 1 M I AS PER DRG NO CII 247 3 SHEETS[74]() Specification : ARM, RANGE NO.5 MK 1(M-I) AS PER DRG.NO.: CII-247(3 SHEETS) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8[74]() Specification : CASE SPRIT BUBBLE TO DRG. NO. IRDE-1076/8 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) MIRROR MOUNT DRG NO. IRDE-1175/83[74]() Specification : MIRROR MOUNT DRG NO. IRDE-1175/83 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) LEVER DRG.NO.CII-125[74]() Specification : LEVER DRG.NO.CII-125 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) CELL TO DRG.NO. , MCT-3237 FOR D-7[74]() Specification : CELL TO DRG.NO. , MCT-3237 FOR D-7 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) PLATE TO DRG.N0.MCT-2473[74]() Specification : PLATE TO DRG.N0.MCT-2473 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) LAMP WANDERING 1A[74]() Specification : LAMP WANDERING 1A AS PER DRG.NO.MCT-3212 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) STITCHING OF NYLON STRAP BLACK[74]() Specification : STITCHING OF NYLON STRAP BLACK(12MM WIDE X 1.5MM THICK X 1000MM LONG) WITH PAD(40 MM WIDE X 2MM THICK X 100MM LONG) ON CLAMP. NOTE:-CLAMP WILL BE PROVIDED BY OFDUN. C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) cover protective dust and moisture seal MCT 2952 1[74]() Specification : cover protective dust and moisture seal MCT 2952 1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO 17A MK 2 M1 TO DRG NO MCT 2705 COMPLETE FOR COLLIMETER INFINITY[74]() Specification : TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG.NO.MCT-2705 COMPLETE.FOR COLLIMETER INFINITY. C Nonestab
2) STRAP END DRG NO MCT 3071[00]() Specification : STRAP END DRG NO MCT-3071 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) STRAP WEB WITH BUCKEL[00]() Specification : STRAP WEB WITH BUCKEL"A"WITH BUCKEL3/4" WIDE X 21" LONG C Nonestab
2) STRAP WEBBING ASSY MCT 2965 1 FOR BINOCULAR STAINER 8X30R HR BINO[74]() Specification : STRAP WEBBING ASSY MCT-2965/1 FOR BINOCULAR STAINER 8X30R(HR BINO) C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) FRAME FOR GOGGLES ALL TERRAIN AS PER DRG NO CQA GS PROV GS 5 1 2012 C SHT 2 OF 4 WITH ELASTIC TAPE INCLUDING PIN and BUCKLE COMPLETE DRG NO CQA GS PROV GS 5 1 2012 C SHT 3 OF 4 DETAILED SPECN FOR FRAME and ELASTIC TAPE AS PER ANNEXURE[74]() Specification : FRAME FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4, WITH ELASTIC TAPE INCLUDING PIN & BUCKLE(COMPLETE) DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4. DETAILED SPECN. FOR FRAME & ELASTIC TAPE AS PER C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) PIVOT FOR ARTY BOARD NO.2 MK-1 AS PER DRG. NO. : CIA-OS-560[74]() Specification : PIVOT FOR ARTY BOARD NO.2 MK-1 AS PER DRG. NO. : CIA-OS-560 C Nonestab
2) BLOCK TO DRG.NO. MCT-2439/1[74]() Specification : BLOCK TO DRG.NO. MCT-2439/1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) LAMP WANDERING 1A AS PER DRG. NO. MCT-3212.() As per required Specification C Not Estab.
2) LAMP HEAD ATTACHMENT AS PER DRG. NO. MCT-3211.() As per required Specification C Not Estab.
Category : P
Grade : III
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) CONTAINER CELL[74]() Specification : CONTAINER CELL 1a MCT-3075 FOR LAMP GUN LAYING 1A AS DR.NO.:MCT-3075 C Nonestab
2) FACE MASK TO DRG NO.MCT-1337 COMPRISING OF DRG NO. MCT-1885,1337/1 SH.-3 1878/1, 1879/1, 1337/1 SH.-2, 1860/1, 1886/1 ASSY DRG NO.MCT-1337[74]() Specification : FACE MASK TO DRG NO.MCT-1337 COMPRISING OF DRG NO. MCT-1885,1337/1 SH.-3 1878/1, 1879/1, 1337/1 SH.-2, 1860/1, 1886/1 ASSY DRG NO.MCT-1337 C Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) 120 DEGREE CSK HEAD ALLUMINUM RIVET I S 9089[17]() Specification : 120 DEGREE CSK HEAD ALLUMINUM RIVET 1.6MM X5MM I S-9089 C Nonestab
2) BOLT LATCH TO DRG NO MCT 3103 FOR MT TELESCOPE 102A[74]() Specification : BOLT,LATCH TO DRG.NO. MCT-3103.FOR MT.TELESCOPE 102A C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) TRIPODE FIRE CONTROLL INSTT.101A TO DRG NO.CII-369 SPCN NO.CII-166(LATEST)() AS PER SPECIFICATION C Not estab.
Category : P
Grade : II
Size : S
1) Ordnance Factory Dehradun
Name Specification Use Status
1) CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434[74]() Specification : CASE MORTAR SIGHT TESTING APPARATUS MK-I AS PER DRG NO. CIA(FC)2434 C Nonestab
Category : ddp
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) ALUMINIUM RIVET FLAT HEAD DIAMETER 2 MM LENGTH 6 MM CONFIRMING TO IS 2155[17]() Specification : ALUMINIUM RIVET FLAT HEAD DIAMETER=2 MM & LENGTH = 6 MM CONFIRMING TO IS-2155 C Nonestab
2) ADAPTER TO DRG NO MCT 2875[74]() Specification : ADAPTER TO DRG.NO. MCT-2875 C Nonestab
3) BAG NO 3 WITH SLING EMPTY CASE CARRYING FOR TELESCOPIC SIGHT FFV 625 GF 215125 CAT PT NO 1240 002623[00]() Specification : BAG NO 3 WITH SLING EMPTY/CASE CARRYING FOR TELESCOPIC SIGHT FFV-625 (GF-215125) CAT/PT.NO.1240-002623. C Nonestab
4) BATTERY COUNTER DRG NO OS 13589[74]() Specification : BATTERY COUNTER DRG.NO.OS-13589 C Nonestab
5) BATTERY HOUSING TO DRG NO MCT 1967 2[00]() Specification : BATTERY HOUSING TO DRG.NO. MCT-1967/2 C Nonestab
6) BLOCK AS PER DRG NO MCT 3283 FOR COLLIMETER INFINITY 102 A[74]() Specification : BLOCK AS PER DRG.NO.MCT-3283 FOR COLLIMETER INFINITY 102 A C Nonestab
7) BLOCK LOCKING AS PER DRG NO MCT 3271 1 FOR SIGHT DIAL 104A[74]() Specification : BLOCK LOCKING AS PER DRG.NO. MCT-3271/1 FOR SIGHT DIAL 104A C Nonestab
8) BLOCK TO DRG NO MCT 3091 FOR MT TELESCOPE 102A[74]() Specification : BLOCK TO DRG.NO-MCT-3091 FOR MT.TELESCOPE 102A C Nonestab
9) BOLT LATCH TO DRG NO MCT 3103 FOR MT TELESCOPE 102A[74]() Specification : BOLT,LATCH TO DRG.NO. MCT-3103.FOR MT.TELESCOPE 102A C Nonestab
10) BRACKET AS PER DRG NO MCT 3282[74]() Specification : BRACKET AS PER DRG.NO.MCT-3282 C Nonestab
11) BRACKET DRG NO CQA I 796 1[74]() Specification : BRACKET DRG.NO.CQA(I)-796/1 C Nonestab
12) BRACKET DRG NO IRDE 2048 1 MCT 3150[74]() Specification : BRACKET DRG NO.IRDE 2048/1 MCT-3150 C Nonestab
13) BUCKLE TO DRG NO IRDE 2001 65[00]() Specification : BUCKLE TO DRG NO.IRDE-2001/65 C Nonestab
14) BUSHING SLEEVE AS PER DRG NO IRDE 335 76[74]() Specification : BUSHING, SLEEVE, OD 22.9MM AS PER DRG.NO.: IRDE-335/76 C Nonestab
15) BUTT HINGES MILD STEEL FLAP IS1341[19]() Specification : BUTT HINGES MILD STEEL. SIZE-2"LONG X 5/8"FLAP IS-1341 C Nonestab
16) BUSH FOR DIRECTOR FIRE CONTROL NO 7 DRG NO MCT 2446[74]() Specification : BUSH FOR DIRECTOR FIRE CONTROL NO.7. DRG.NO.MCT-2446 C Nonestab
17) C SK HD SCREW M2X3 BRASS IS1365 FOR SU 102B[17]() Specification : C.SK.HD.SCREW M2X3 BRASS IS-1365 FOR S.U 102B. C Nonestab
18) CAP TO DRG NO MCT 2433 FOR D7[74]() Specification : CAP TO DRG.NO, MCT-2433 FOR D-7 C Nonestab
19) CASE DRG NO OS 34611[74]() Specification : CASE DRG.NO.:OS-34611 C Nonestab
20) CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A DRG NO MCT 1699 COMPRISING OF MCT 1695 1 MCT 1704 1 MCT 1705 1 MCT 1706 1 MCT 1707 1[00]() Specification : CASE CANVAS FOR GOGGLES NIGHT VISION PASSIVE 102A,DRG NO. MCT-1699,COMPRISING OF MCT-1695/1,MCT-1704/1 MCT-1705/1,MCT-1706/1,MCT-1707/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY) C Nonestab
21) CASE CANVAS TO DRG NO MCT 1415[00]() Specification : CASE CANVAS TO DRG NO. MCT-1415 C Nonestab
22) CASE CANVAS TO DRG NO CWC 246 FOR PNVB L W M 1[00]() Specification : CASE CANVAS TO DRG NO.CWC-246 FOR PNVB(L/W) M-1 C Nonestab
23) CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO MCT 2964 2 FOR HR BINO 8X30[74]() Specification : CASE CARRYING BINO STAINER 8X30 R AS PER DRG NO. MCT-2964/2 FOR HR BINO 8X30. C Nonestab
24) CASE CARRYING TO DRG NO MCT 1925 3[74]() Specification : CASE CARRYING TO DRG NO. MCT-1925/3(COMPELETE) CONSISTING OF DRG NOS.MCT-1349/1,MCT-1350/1,MCT-1369, MCT-1456/1,MCT-1458/1,MCT-1916/2, MCT-1917/2,MCT-2213/1,MCT-2212/1 CQA(I) INSTRUCTION SHEET NO.IS/INF/15(A) C Nonestab
25) CASE TO DRG NO MCT 2483 3[74]() Specification : CASE TO DRG,NO. MCT-2483/3 C Nonestab
26) CLAMP FINISH TO DRG NO MCT 2103[74]() Specification : CLAMP(FINISH) TO DRG NO. MCT-2103 C Nonestab
27) CORNER PIECE FOR BASE PLATE TO DRG NO MCT 874 1[00]() Specification : CORNER PIECE FOR BASE PLATE TO DRG NO. MCT-874/1 C Nonestab
28) CONTAINER AS PER DRG NO IRDE 335 68[74]() Specification : CONTAINER AS PER DRG.NO.:IRDE-335/68 C Nonestab
29) CORNER CASE LOWER MCT 3261[74]() Specification : CORNER CASE LOWER MCT-3261 C Nonestab
30) COVER CANVAS 4 A TO DRG NO MCT 2759[00]() Specification : COVER CANVAS 4 A TO DRG.NO.MCT-2759 C Nonestab
31) COVER CANVAS AS PER DRG NO MCT 1461 NOTE EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG INDIVIDUALLY PACKED[00]() Specification : COVER CANVAS AS PER DRG NO. MCT-1461 NOTE:EACH COVER CANVAS WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDUALLY PACKED) C Nonestab
32) COVER PLATE AS PER DRG NO IRDE 335 8[74]() Specification : COVER, PLATE AS PER DRG.NO.:IRDE-335/8 C Nonestab
33) CSK HD MC SCREW M3X5 LONG BRASS FOR FOR S U C 102B[17]() Specification : CSK HD MC SCREW M3.0X5.0 LONG BRASS FOR FOR S.U.C. 102B. C Nonestab
34) DIAL SCALE TELESCOPE 102A[74]() Specification : DIAL SCALE,II TO DRG.NO. MCT-3109.FOR MT.TELESCOPE 102A C Nonestab
35) DIAL SCALE 1 TO DRG NO MCT 3093 FOR MT TELESCOPE 102A[74]() Specification : DIAL SCALE -1 TO DRG.NO.MCT-3093 FOR MT.TELESCOPE 102A C Nonestab
36) DOVE TAIL BOX DRG NO IRDE 2048 42 MCT2099[74]() Specification : DOVE TAIL BOX DRG NO.IRDE-2048/42 MCT-2099 C Nonestab
37) DOVETAIL COMPLETE TO DRG NO MCT 2230 3 FOR DAY SIGHT RIFLE[74]() Specification : DOVETAIL COMPLETE TO DRG NO.MCT-2230/3 FOR DAY SIGHT RIFLE 5.56MM C Nonestab
38) FASTENER SET TURN LOCK DRG NO MCT 1189 1[00]() Specification : FASTENER SET,TURN LOCK DRG NO.MCT-1189/1 C Nonestab
39) FRAME WITHOUT ENGRAVING AS PER DRG NO MCT 3468[74]() Specification : FRAME WITHOUT ENGRAVING AS PER DRG.NO.MCT-3468 NOTE:SAMPLE APPROVAL IS REQUIRED BEFORE BULK SUPPLY C Nonestab
40) FRP CASE CARRYING[74]() Specification : FRP CASE CARRYING TO DRG NO. MCT-1384/1 (COMPLETE CONSISTING OF 11 NOS DRGS) C Nonestab
41) HOOK SAFETY NO 3 TO DRG NO MCT 695 1 7 SHEETS[17]() Specification : HOOK SAFETY NO-3 TO DRG.NO. MCT-695/1, 7 SHEETS. C Nonestab
42) HOUSING ASSLY MCT2288 COMPRISING OF MCT2397 1 MCT 2396 MCT 2290[74]() Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290 C Nonestab
43) HOUSING OBJECTIVE TO DRG NO CQA I 793 44 FOR MK III[74]() Specification : HOUSING,OBJECTIVE TO DRG NO. CQA(I)-793/44 1/SET FOR MK-III C Nonestab
44) METAL CASE TO DRG NO MCT 1999 FOR BORE MUZZLE SIGHT[74]() Specification : METAL CASE TO DRG NO. MCT-1999 FOR BORE MUZZLE SIGHT. C Nonestab
45) LEVEL INDICATOR TO DRG NO MCT 3250 FOR CLINOMETER 2A 46[74]() Specification : LEVEL INDICATOR TO DRG.NO.MCT-3250 FOR CLINOMETER 2A 46 C Nonestab
46) LEVER CONTROL HAND TO DRG NO MCT 3244 FOR SIGHT DIAL104A[74]() Specification : LEVER CONTROL HAND TO DRG.NO.MCT-3244 FOR SIGHT DIAL104A C Nonestab
47) MOUNTING PLATE ASSY DRG NO MCT 2289 COMPRISING OF MCT 2393 1 MCT 2394 MCT 2395 1 AND MCT 2392 2[74]() Specification : MOUNTING PLATE ASSY.DRG NO MCT-2289 COMPRISING OF MCT-2393/1,MCT-2394 MCT-2395/1 AND MCT-2392/2. C Nonestab
48) SCREW DRIVER[00]() Specification : SCREW DRIVER NO.7 TO DRG NO.MCT-796/2 C Nonestab
49) SLING CARRYING CASE[00]() Specification : SLING CARRING CASE ,MCT-1513 C Nonestab
50) SPRING DRG NO MCT 2982 FOR DRIVER DAY PERISCOPE SIDE AND COMMANDER DAY EPISCOPE[74]() Specification : SPRING DRG.NO.MCT-2982, FOR DRIVER DAY PERISCOPE SIDE & COMMANDER DAY EPISCOPE C Nonestab
51) SPRING HELICAL COMPRES MCT850 2[00]() Specification : SPRING HELICAL COMPRESSION AS PER DRG. MCT-850/2 C Nonestab
52) SPRING MCT 3081[00]() Specification : SPRING AS PER DRG.NO. MCT-3081 C Nonestab
53) WASHER TO DRG MCT 3114 1 FOR SUC 102B[74]() Specification : WASHER TO DRG. MCT-3114/1 FOR SUC-102B C Nonestab
54) WASHER TO DRG NO IRDE 1274 2 MCT 1313[00]() Specification : WASHER TO DRG NO,IRDE-1274/2(MCT-1313) C Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) LEVEL FIRE CONTROL INSTRUMENT AS PER DRG. NO. IRDE-1135/SA-1[74]() Specification : LEVEL FIRE CONTROL INSTRUMENT AS PER DRG. NO. IRDE-1135/SA-1 C Nonestab
2) LAMP GUN MOUNTED 4A MCT-3210[74]() Specification : LAMP GUN MOUNTED 4A MCT-3210 C Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]() Specification : Vial Level Circular Cased MK 2 MCT 3439 C Estab
2) ENGRAVING OF SCALE ARTILLERY[74]() Specification : ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES) R Estab
3) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138[74]() Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370, C Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]() Specification : Vial Level Circular Cased MK 2 MCT 3439 C Estab
2) ENGRAVING OF SCALE ARTILLERY[74]() Specification : ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES) R Estab
3) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138[74]() Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370, C Estab
4) CASE ARTILLERY AND MAP BOARDS MK 2[74]() Specification : CASE, ARTILLERY AND MAP BOARDS, MK 2 AS PER DRG.NO.: O.S.30986(17 SHEETS) C Estab
5) CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)[74]() Specification : CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY) C Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Dehradun
Name Specification Use Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]() Specification : Vial Level Circular Cased MK 2 MCT 3439 C Estab
2) ENGRAVING OF SCALE ARTILLERY[74]() Specification : ENGRAVING OF SCALE ARTILLERY AS PER DRG. NO.CIA (OS) 564. BLANK WILL BE SUPPLIED BY OFD (FIRM SHOULD SUPPLY THE ITEM WITH PROPER PACKING TO AVOID SCRATCHES) R Estab
3) CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370,1375,1376 MCT-138[74]() Specification : CASE CARRYING FRP FOR SIGHT NIGHT VISION PASSIVE 5.56MM RIFLE(INSAS)101A DRG.NO. MCT-1678/2 COMPLETE WITH DRG MCT-1679/1,MCT-1680/1MCT1637/1,MCT-1646/1 MCT-2007.MCT-2008,MCT-2546/1,MCT-2548/1,MCT- 1644/1,1636/1,1617/1,MCT-1369,1370, C Estab
4) CASE ARTILLERY AND MAP BOARDS MK 2[74]() Specification : CASE, ARTILLERY AND MAP BOARDS, MK 2 AS PER DRG.NO.: O.S.30986(17 SHEETS) C Estab
5) CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY)[74]() Specification : CASE CANVAS TO DRG NO.MCT-1682/1 MCT-1682/1 NOTE:EACH CANVAS CASE WILL BE SUPPLIED IN GOOD QUALITY OF POLYTHENE BAG (INDIVIDULLY) C Estab
6) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 CII 253 2[74]() Specification : R Nonestab
Category : P
Grade : II
Size :
1) Gun and Shell Factory
Name Specification Use Status
1) MAGAZINE ASSY FOR ASHANI MK III IN FC AS PER DRG NO:- CTM-158 B[70]() Specification : MAGAZINE ASSY. FOR ASHANI MK-III IN F/C AS PER DRG NO:- CTM-158 B C Nonestab
2) MAGAZINE ASSY FOR POINT 32 INCH PISTOL WITHOUT NICKEL PLATING AS PER DRG NO: CTM-180[70]() Specification : MAGAZINE ASSY FOR 0.32 INCH PISTOL (MK-1M) WITHOUT NICKEL PLATING IN F/C AS PER DRG NO: CTM-180 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SPANNER RING 51A CAT NO 5120 003896 0004[90]() Specification : SPANNER RING 51A CAT NO 5120 003896 0004 C Nonestab
2) SPANNER 36A ICM 1595 SPANER 36A 0026[90]() Specification : SPANNER 36A ICM 1595 SPANER 36A 0026 C Nonestab
3) SPANNER RING 52A PT NO 5120 003897[90]() Specification : SPANNER RING 52A PT NO 5120 003897 C Nonestab
4) SPANNER 35A TO DRG NO 5120 003114[90]() Specification : SPANNER 35A TO DRG. NO.5120-003114 C Nonestab
5) 9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122[90]() Specification : 9080080715 SPANNER 40A TO DESIGN NO D6P TA 7129 PART NO ICM 1599 D S CAT NO 5120 003122 C Nonestab
6) 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120[90]() Specification : 9080081481 SPANNER 39A 5120 003120 TO DRG NO 5120 003120 C Nonestab
7) 9080081577 SPANNER WRENCH TO DRG NO 5140 000205[90]() Specification : 9080081577 SPANNER WRENCH TO DRG NO 5140 000205 C Nonestab
8) 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119[90]() Specification : 9080081480 SPANNER 38 A MODIFIED TO DRG NO DS CAT 5120 003119 R Nonestab
9) 9080081479 SPANNER 44 A TO DRG NO 5120 003116[90]() Specification : 9080081479 SPANNER 44 A TO DRG NO 5120 003116 R Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SPANNER, 36A (ICM. 1595) SPANNER, 36A (ICM-1595) TO DRG. NO. 5120-003117[90]() Specification : SPANNER, 36A (ICM. 1595) SPANNER, 36A (ICM-1595) TO DRG. NO. 5120-003117 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) SHACKLE 4030 00093 FOR APPARATUS[90]() Specification : SHACKLE 4030-00093 FOR APPARATUS TO DRG NO DS CAT-4030-000493 C Nonestab
2) SHACKLE D6P TA 720802DRG 4030 000373[90]() Specification : SHACKLE D6P TA 720802 DRG 4030-000373 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun Carriage Factory
Name Specification Use Status
1) 9080080400 SPANNER SOCKET DOUBLE ENDED[90]() Specification : DS CAT NO. 5120-004555 C Nonestab
Category :
Grade : Grade III
Size : S
1) Gun and Shell Factory
Name Specification Use Status
1) 0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION.[14]() Specification : 0.32" PISTOL BOX DRG. NO. M-9881-B IN FINISHED CONDITION. NOTE:- FIRM MAY GIVE ALT. OFFER OF THE BOX WITH STEEL LOCK(PLATED GOLDEN COLOUR) INSTEAD OF BRASS LOCK REMAINING OTHER PARAMETER UNCHANGED E Nonestab
Category :
Grade : Grade III
Size : S
1506 M/s TULASI ENGINEERING WORKS
PLOT NO : 2C/15, PHASE-I, IDA, PATANCHERU PATANCHERU HYDERABAD Telangana
PIN1 : 502319
Phone No. : 241081
GSTIN : 36ADUPR9267K1ZD 		HYDV05780F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) UPPER RACE RING SEMI MACHINED LF 6106915784[61]() Specification : MACHINING ASSISTANCE C Nonestab
2) LOWER RACE RING SEMI MACHINED LF 6106915785[61]() Specification : MACHINING ASSISTANCE AS PER SCOPE OF WORK C Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Medak
Name Specification Use Status
1) RING () 675-65-492 C Not Estab
2) HEAVY MACHINING OPERATIONS() As per drawing C Not Estab
Category : P
Grade : II
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]() Specification : AS PER DRAWING. C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[03]() Specification : AS PER DRAWING. C Nonestab
Category :
Grade : Grade III
Size : S
1) Field Gun Factory Kanpur
Name Specification Use Status
1) SPACER AS PER DRG No IWP 1271[41]() Specification : SPACER AS PER DRG No IWP 1271 C Estab
Category :
Grade : Grade III
Size : S
1507 WALCHANDNAGAR INDUSTRIES LIMITED, WALCHANDNAGAR,
Walchandnagar Taluka - Indapur Walchandnagar Dist - Pune Maharashtra
PIN1 : 413114
Phone No. : 307416
GSTIN : 27AAACW0541M1Z9 		PNEW00017D

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Machining of 1000 lbs Aerial Bomb MK-II A/C() As per Drg. & Specification C Not Established
Category : DP
Grade : II
Size : L
1) Grey Iron Foundry
Name Specification Use Status
1) Machining of 25LBS Bomb Body() As per Drg. & Specification C Not Established
Category : DP
Grade : I
Size : L
1) Gun and Shell Factory
Name Specification Use Status
1) 84mm TPT PROJECTILE BODY TO GSF DRG. NO M-11229 IN FINISH MACHINED CONDITION[61]() Specification : AS PER DRG. C Nonestab
Category : p
Grade : Grade II
Size : L
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BOMB BODY (E) SET ASSY 100-120KG PRE-FRAG (9911358086)[99]() Specification : DRG.NO. 0303 00 01 01 02 000 00PB AND CONSISTING OF 29 COMPONENTS AND TO ARDE SPECIFICATION NO. ARDE/SPECN/668 DATE DEC 2007 REV. 2 DT. DEC. 2010 FOR PRE-FRAG 100-120KG C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING[90]() Specification : SUB ASSEMBLIES & COMPONENTS OF 120 MM MORTAR AS PER DRAWING C Nonestab
Category : ddp
Grade : Grade I
Size : L
1) Gun Carriage Factory
Name Specification Use Status
1) SUB ASSEMBLIES & COMPONENTS OF 81 MM MORTAR[90]() Specification : SUB ASSEMBLIES & COMPONENTS OF 81 MM MORTAR C Nonestab
Category : ddp
Grade : Grade I
Size : L
1508 PEMRAJ INDUSTRIES
1194/18 a krishnanand bulding ghole road near icici bank 1194/18 a krishnanand bulding, ghole road near icici bank pune Maharashtra
PIN1 : 411005
Phone No. : 25535663
GSTIN : 27AAOPD8572G1ZD 		AAOPD8572G

Download 		1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF ALUMINIUM ALLOY 33 POINT 5 Description : CONVERSION OF ALUMINIUM ALLOY 33 POINT 5() Specification : CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE - 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D R Estab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D Description : CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D() Specification : CONVERSION OF 100 MM DIA ROD AL GR 6082 IN TO DISTANCE TUBE BLANK OF 84 MM MK III TO DRG NO CC 496 D C Estab
Category : dp
Grade : 3
Size : S
1509 DYNAMIC FLOW PRODUCTS PVT.LTD.
UNIT NO.1,2,5, SAMIULLAH KHAN COMPOUND VAKANPAD PELHAR Maharashtra
PIN1 : 401208
Phone No. : 9322599811
GSTIN : 27AACCD3013F1Z8 		MUMD13438F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) TORSION BAR FORGING 3991051007[39]() Specification : AS PER DG C Nonestab
2) SHAFT TORSION FORGING 3996411023[39]() Specification : AS PER VQC C Nonestab
Category :
Grade : Grade III
Size : M
1510 SUNDARAM INDUSTRIES PRIVATE LTD
POST BOX NO.6, USILAMPATTI ROAD, KOCHADAI MADURAI MADURAI Tamil Nadu
PIN1 : 625016
Phone No. : 4348888
GSTIN : 33AABCS5320H2ZQ 		AABCS5320H

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) GEAR BOX SUB ASSY ITEMS CONSISTS OF 9 to HVF T 90 GB RUBBER 317 to 6201001060[30]() Specification : TY 005216 -75 C Nonestab
Category :
Grade : Grade III
Size : L
1511 H.V Technologies
B-7, Phase II, Transport Nagar, Dehradun Behind FCI Godown Dehradun Uttarakhand
PIN1 : 248002
Phone No. : 7500464464
GSTIN : 05ADLPK2540H1ZR 		MRTH00949E

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) silver nitrate LF 1001713302[10]() Specification : SILVER NITRATE AR GRADE 99.9% E Nonestab
Category :
Grade : Grade III
Size : S
1512 IMT CABLES PRIVATE LIMITED
A-96, MAYAPURI INDUSTRIAL AREA PHASE-II DELHI Delhi
PIN1 : 110064
Phone No. : 011281166
GSTIN : 06AAACI9090D1ZO 		DELI04110B

Download 		1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) BPVLE WIRES OF DIFFERENT SIZES[15]() Specification : TY-16-505-911-76 R Nonestab
2) BPVL WIRES OF DIFFERENT SIZES[15]() Specification : TY-16-505-911-76 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) BPVLZ WIRE Zero point 35 SQMM TO 95 SQMM[07]() Specification : T? 16-505.911-76 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Cable Factory Chandigarh
Name Specification Use Status
1) Annealed Tinned Copper Wire as per Attached OFCd specification[70]() Specification : OFCd specification No WD/06 -A dated. 04.04.2023 R Estab
Category :
Grade : Grade III
Size : S
1513 Tamil Nadu Tools & Hardwares
128/260, Angappa Naicken Street, CHENNAI TAMIL NADU
PIN1 : 600001
Phone No. : 044 42130115
GSTIN : 33AAAPH3002R1Z0 		AAAPH3002R

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) AIR BLOW GUN() As per specifications E Estab.
2) ALLEN KEY () As per specifications
3) ANABOND 200 () As per specifications
4) ARALDITE ADHESIVE() As per specifications
5) BAG() As per specifications
6) BANJO BOLT () As per specifications
7) BEE WAX () As per specifications
8) BEND MS GALVANISED () As per specifications
9) BOLT M.S. HEX.HEAD () As per specifications
10) BRASS WIRE BRUSH() As per specifications
11) BUFFALO LEATHER FOR GASKET () As per specifications
12) BUSH OD 22MM X ID 19MM X25MM LG () As per specifications
13) BUTTERFLY VALVE() As per specifications
14) BUTTON CELL (1.5V) () As per specifications
15) CAPILLARY TUBE IMPULSE LINE FOR ETH() As per specifications
16) CAST COPPER ANODE () As per specifications
17) COMBINATION SIDE CUTTING PLIER () As per specifications
18) COTTON CLOTH BAGS() As per specifications
19) CENTRE DRILL() As per specifications
20) CHALK WHITE () As per specifications
21) C.I.PLAIN MACHINABLE ELECTRODE10SWG () As per specifications
22) CHUCK KEY () As per specifications
23) CLIP STEEL(OPEN TYPE)FOR CEILING () As per specifications
24) COMBINATION SPANNER () As per specifications
25) COUNTERSINK TOOL () As per specifications
26) COUNTING SCALE () As per specifications
27) CROCODILE CLIP () As per specifications
28) DOUBLE EYE POLYESTER WEB SLINGS () As per specifications
29) DRILL SLEEVE () As per specifications
30) DUNLOP ADHESIVE S-758 () As per specifications
31) ELECTRODE MS ROD () As per specifications
32) ELECTRONIC ETCHING MACHINE () As per specifications
33) ENGINE OIL SAE 15W40 () As per specifications
Category : P
Grade : II
Size : S
1514 APAR INDUSTRIES LTD.
Survey No. 82/2/P1, 88, 861/1. 862/1 & 863/1, Manepkur Road, Khatalwada, Tal. Umbergaon, Dist. Valsad, Gujarat
PIN1 : 396120
Phone No. : 0260-2401600
GSTIN : 24AAACG1840M1ZR 		MUMA42643G

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) 19X34, SINGLE CORE, SHIELDED, SILVER PLATED COPPER WIRE, ENCLOSED IN TEFLON COATED SLEEVE-BLACK() AS PER DGNAI SPECN. R Not Estab.
2) 19X34, SINGLE CORE, SHIELDED, SILVER PLATED COPPER WIRE, ENCLOSED IN TEFLON COATED SLEEVE-RED() AS PER DGNAI SPECN. R Not Estab.
Category : DP
Grade : II
Size : L
1515 SAINI PRECISION CASTING
E-740, Phase - VIII, Focal Point, Opposite Hero Cycles, Mangli Division, Chandigarh Road Ludhiana Punjab
PIN1 : 141010
Phone No. : 2674992 		JLDS06253C

Download 		1) Ordnance Factory Dehradun
Name Specification Use Status
1) BEARING SLEEVE SPECIAL BOTTOM DRG. NO.:CQA(I)-796/5.() As per required Specification C Not Estab.
2) BRACKET DRG. NO. CQA(I)-796/1.() As per required Specification C Not Estab.
3) BASE TO DRG.NO. MCT-2877/1 FOR MT.TELESCOPE 102A.() As per required Specification C Not Estab.
Category : DDP,DP
Grade : I,II
Size : S
1516 SAI CANVAS
M.S. KOTHI, NEAR JIROLI RLY. GATE, A.B. ROAD, DHOLPUR, RAJASTHAN
PIN1 : 328001
Phone No. : 05642-222983
GSTIN : 08ALHPJ5994Q1Z2 		ALHPJ5994Q

Download 		1) Ammunition Factory Khadki
Name Specification Use Status
1) BAG 3 A/L CANVAS TO DRG. NO. ARDE 2125 PT. NO. ISV 532A() DRG. NO. ARDE 2125 PT. NO. ISV 532A E Not Estab.
Category : P
Grade : III
Size : S
1) Ordnance Factory Varangaon

[Deemed Registration]
Name Specification Use Status
1) BANDOLIER 3A Description : BANDOLIER 3A() Specification : To Drg. No. ISV 514-A, DC (I) No. 37334-A Dtd. 19-03-2013 and to specn. IA:1078(j) DCI NO. 35199-A DT. 22-10-1991. Material :- The Bandolier is to be made of drill cotton disruptive pattern (VAT Printed) to Specn. : JSS-8315-08-2011, Rev E Estab
Category : p
Grade : 3
Size : S
1517 JPSKYTEK ENGINEERING
J-279, M.I.D.C., BHOSARI, PUNE (MAHARASHTRA)
PIN1 : 411026
Phone No. : 020-46704599
GSTIN : 27AARPP6306K1Z5 		PNED02892B

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Tail Unit Assyembly 100-120 kgs() As per Drg. & SpecificationA C Not Established
Category : DP
Grade : III
Size : S
1518 Indira Engineering Industry,
Plot No. 64/B, Industrial Estate, Richhai, Jabalpur (MADHYA PRADESH)
PIN1 : 482010
Phone No. : 0761-2430423, Mob.No. 9669919434, 9302612163 		CWHPS5601J

Download 		1) Grey Iron Foundry
Name Specification Use Status
1) Nose Adapter Bush() As per Drg. & Specification C Not Established
2) Base Adapter Bush() As per Drg. & Specification C Not Established
Category : DP
Grade : III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BANGALORE TORPEDO SECT 38MM 2M EMPT (6430200100)() BANGALORE TORPEDO, SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91 C NOT ESTABLISHED
2) SUB ASSY OF DETONATOR DISC (9911358194)() SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 , PARALLEL PIN DRG.NO. 000.7369.043.0, DISC DRG. NO. 000.7369.003.0 C NOT ESTABLISHED
Category : P
Grade : III
Size : S
1) Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies. Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.() Specification : Drg. No.ITW-63 C Estab
2) Machining of Lifting Plug. Description : Machining of Lifting Plug.() Specification : As per Drawings. C Estab
Category : p
Grade : 3
Size : S
1519 Eswari Engineering Works
Old No-10, New No-106B, SchoolRoad, Cholambedu, Thirumullaiviyal, CHENNAI TAMIL NADU
PIN1 : 600062
Phone No. : 044 26385659
GSTIN : 33AABFE1591P1Z9 		AABFE1591P

Download 		1) Engine Factory Avadi
Name Specification Use Status
1) Adjusting Shaft() 360-26-006-02 Estab.
2) Bolt M6x20() 356-84 Estab.
3) Bush() 20-11-69-2 Estab.
4) Bushing() 20-041-143 Estab.
5) By-pass pipe() 20-07-305 Estab.
6) Captive Nut() 420-68 Estab.
7) Connector() 3327-112 Estab.
8) Distributor Cap() 310-10 A Estab.
9) Gasket() 3327-61-3 Estab.
10) Locating Ring() 20-09-69 Estab.
11) Lock Pin() 301-32 Estab.
12) Lock Ring() 360-26-025 Estab.
13) Nut() 326-19 Estab.
14) Piston Ring Clamp() 400094 Estab.
15) Plate() 3308-90 Estab.
16) Plug() 303-13-4 Estab.
17) Ring Holder() 337-128 Estab.
18) Ring Stop() 20-01-85 Estab.
19) Space Ring() 20-08-241-1 Estab.
20) Special Wrench() 400474 Estab.
21) Washer() 301-53 Estab.
22) Washer() 3342-247 Estab.
23) Valve Guide() 20-16-17-1 Estab.
Category : P
Grade : II
Size : S
1520 ANUP POLYCHEM INDUSTRIES
D-10 STICE SINNAR NASHIK SHIRDI ROAD SINNAR Maharashtra
PIN1 : 422112
Phone No. : 24470592 		ACNPJ6093R

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) APC NO 5 ITEM CODE 1003103013 Description : APC NO 5 ITEM CODE 1003103013() Specification : AMMUNITION PROTECTIVE COMPOSITION NO. 5 (CASHEW POLYMER CEMENT RD- 1286 AMMN) TO SPECN:- JSS-8030-20:2009 REVISION NO. 3 (REAFFIRMED 2015) DC NO. 5367-ME DT 28/07/15. NOTE- FIRM SHOULD MENTION MANUFACTURING DATE AND EXPIRY DATE OF THE APC R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003109613 APC 101 RD 1061 JSS 8030 28 Description : 1003109613 APC 101 RD 1061 JSS 8030 28() Specification : AMMUNITION PROTECTIVE COMPOSITION NO.101 (RD-1061)SPECN.NO. JSS-8030-28:2003 (REV.NO.1) DC-3784-MEDATED : 25/09/2003 R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1003109600 COMPOSITION BITUMINOUS RD 1083 Description : 1003109600 COMPOSITION BITUMINOUS RD 1083() Specification : COMPOSITION, BITUMINOUS, R.D 1083 SPECIFICATION NO. C.S. 2907-A AMENDMENT A DT.12-07-1963 R Nonestab
Category : p
Grade : 3
Size : O