List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1361 ASHOK STEEL INDUSTRIES
G.T. ROAD, SIRHIND SIDE, VILL- AJNALI VILL-AJNALI MANDI GOVINDGARH PUNJAB
PIN1 : 147301
Phone No. : 9815459000
GSTIN : 03AABFA9060F1ZX 		PTLA11528G

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Steel Flat 10 X 35 mm Description : Steel Flat 10 X 35 mm() Specification : STEEL FLAT 10X35MM, SPECT BS:970:PT.I:1983 GR,045M10OR ALT .MAT.IS:5517-1978 GD 40 NI6CR 4 MO 3FOR LATCH OF FIRING DEVICE (CQA(I)-393/24. R Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) STEEL STRIP 80X3.56MM IS-513 DD CR (0122223036)() STEEL STRIP COLD ROLLED CLOSED ANNEALED BRIGHT FINISHED 3.56 (+0.10/-0.00) MM THICK X 80 +/-0.25 MM WIDE IN LENGTH OF 2 MTRS. TO SPECN:- IS-513:2008 (FIFTH REVISION) GRADE DD TEMPER 5 (ANNEALED) R NOT ESTABLISHED
2) STEEL STRIP 82X0.8MM BS1449/IS513 DD (0121060266)() STEEL STRIP 82+/-0.5 MM WIDE X 0.8+/-0.03 MM THICK TO SPECN:IS-513- TYPE-DD OR BS-1449-PT-I-CS-3 SEC-2 R NOT ESTABLISHED
3) STEEL STRIP 85X2.0MM IS-513/BS1449 (0101061530)() STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) IN ANNEALED & SKIN PASSED COND. ALTERNATIVE GR.1 OR 2 OR 3 OF BS-1449-Pt-I IN (HR/HS) COND. MAX. UTS 390 M R NOT ESTABLISHED
4) STEEL STRIP 100X.5MM/26BG IS513 CR (0133090563)() MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISH TO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLL SHOULD BE BETWEEN 50 KG TO 100 KG R NOT ESTABLISHED
5) STEEL STRIP 200X1.1MM IS513/BS1449 (0101063337)() STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3, CS OR CR IN ANNEALED SKIN PASSED CONDITION MAXIMUM UTS OF 360 MPa. IN STRAIGHT LENGTH OF 3000 MM +/-5.0 MM R NOT ESTABLISHED
6) C.R.L.C.STEEL STRIP 15X1.0 MM GR.DD (0121060001)() COLD ROLLED LOW CARBON STEEL STRIP 15 +/-0.5 MM WIDE X 1.0 +/-0.05 MM THICK TO SPECN. IS-513 DD GRD R NOT ESTABLISHED
7) C.R.L.C.STEEL STRIP 50X0.46MM GR.DD (0121060046)() COLD ROLLED LOW CARBON STEEL STRIP 50 +/-0.5 MM WIDE X 0.46 +/-0.05 MM THICK TO SPECN. IS-513 DD GRD. R NOT ESTABLISHED
8) C.R.L.C.STEEL STRIP 78X0.55MM GR.DD (0121060055)() COLD ROLLED LOW CARBON STEEL STRIP 78 +/-0.5 MM WIDE X 0.55 +/-0.02 MM THICK TO SPECN. IS-513 DD GRD. R NOT ESTABLISHED
Category : P
Grade : III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) ROUND DIA 70x3000 MM LG ST GR:38XC, GOST:4543-71, HOT ROLLED FORGEABLE QUALITY IN ANNEALED CONDITION() DRG.NO.GOST:4543-71 R Not Estab.
Category : P
Grade : I
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) BANDING STEEL STRIP () IS 5872-1990 (SECOND REVISION) REAFFIRMED 1995 E Not Estab.
Category : P
Grade : III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FLAT SIZE 22X60 MM() AS PER DRG. C Not Estab.
2) STEEL ROD DIA.64MM+/-0.5MM() AS PER DRG. C Not Estab.
3) STEEL FLAT SIZE 70X38 MM() AS PER DRG. C Not Estab.
4) STEEL TO BS:970PT-1:1983 835 M15 OR EN-39B SQUARE 90 MM() AS PER DRG. C Not Estab.
Category : P
Grade : III
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ST FLAT SIZE 22 X 60MM Description : ST FLAT SIZE 22 X 60MM() Specification : ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40, R Estab
2) STEEL FLATS Description : STEEL FLATS() Specification : AS PER SPECIFICATION R Estab
Category : s
Grade : 3
Size : S
1362 DHRUV CONTAINERS PVT. LTD.
PLOT NO. 27/A, NAGALWADI, NEAR MIDC INDUSTRIAL AREA, HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440016
Phone No. : 645354
GSTIN : 27AABCD3717B1Z6 		NGPDO0328G

Download 		1Grey Iron Foundry

Name Specification Use Status
1) Vertical Channel 6AL() As per Drg. & Specification C Not Established
2) Top Frame 13A() As per Drg. & Specification C Not Established
3) Bottom Frame 13A() As per Drg. & Specification C Not Established
4) Plate Engaging H2A() As per Drg. & Specification C Not Established
5) Handle H2A() As per Drg. & Specification C Not Established
6) Catch H2A() As per Drg. & Specification C Not Established
7) Plate for Hinge H2A() As per Drg. & Specification C Not Established
8) Hinge & Hinge Pin H2A() As per Drg. & Specification C Not Established
9) Catch H5A() As per Drg. & Specification C Not Established
Category : P
Grade : I,II
Size : S
1Grey Iron Foundry

Name Specification Use Status
1) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
2) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
3) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
4) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
5) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
6) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
7) Package for Tail Unit for 450 Kg HS 40/No LD Bomb (RTU-2231)() As per Specification & Drg. C Not Established
Category : DP
Grade : I,II
Size : S
1Grey Iron Foundry

Name Specification Use Status
1) Package for Tail Unit for 450 Kg HS 40/No LD Momb (RTU-2231) () As per Drg. & Specification C Not Established
Category : DP
Grade : I,II
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) BOX-C 27-A (SER)TIN PLATE[65]() Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) CYLINDER 443 MK1[65]() Specification : CYLINDER 443 MK1/L GALVANISED STEEL SHEET TYPE DEEP DRAWING DESIGNATION GPD TO SPECN. IS : 277-2018 AS PER DRG.NO. OFBA/CX/51 DT.24/2/89. LAST AMENDMENT DATE : 16.07.2020. FELT DISC. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) Aluminium Container SER[25]() Specification : ALUMINIUM CONTAINER AS PER DRG.NO.OFBA/RX/391 Dt 24.10.2020. R Nonestab
2) Cylinder 12 A Steel for Ammunition Container Assembly 117 A[14]() Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428. R Nonestab
3) Metallic Container For Charge 9[25]() Specification : METALLIC CONTAINER FOR CHARGE 9 OF 155mm AMMN.SPECN; CQA (AMMN),KIRKEE AS PER DRG.NO. CQA/AMMN-4085561,DC-35637-A DT. 17.12.93.LEAK TEST AS PER SPECN.IA-1169(n),DC-35707-A DT. 05.5.94. R Nonestab
4) METALLIC CONTAINER M4A2 SER[25]() Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) BOX C 18A STEEL[42]() Specification : SPEC. AMMUNITION CONTAINER BOX, C-18 A/L/(STEEL), FOR AMMUNITION CONT. ASSY .28, TO DRG NO. ISV 282-A, DC- 35479-A R Nonestab
2) BOX G 70 STEEL[42]() Specification : AMMUNITION CONTAINER BOX, BOX G-70 MK-I/LA DRG . PT. NO. S.V. 68-A, DC 37270 -A, SPEC NO. IA 1169(N) DC 35576-A AIDE MEMOIRE P/11 NOTE- RUST PROOFING & PAINTING AS PER DRG. WITH OLIVE GREEN COLOUR ISC-220 OF IS-5-1994 WITH AMENDMENT. R Nonestab
Category :
Grade : Grade III
Size : S
1363 ORDNANCE FACTORY DUM DUM (YANTRA INDIA LIMITED)
2 AND 2A JESSORE ROAD JESSORE ROAD KOLKATA WEST BENGAL
PIN1 : 700028
Phone No. : 033-25694000
GSTIN : 23AABCY4214A2Z0 		AABCY4214A

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT Description : STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT() Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT C Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION Description : BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION Description : BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION Description : COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION() Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT R Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) OBTURATING COPPER BAND 143mm plus 0point6 mm OD X 10 mm plus 0point75 mm WALL THICK X STANDARD LENGTH TO SPECN IS 2501 72 FRTP 1 ANNEALED WITH OXYGEN 0point 07 percent MAX AND UTS 20 KGpermm MIN Description : OBTURATING COPPER BAND 143mm plus 0point6 mm OD X 10 mm plus 0point75 mm WALL THICK X STANDARD LENGTH TO SPECN IS 2501 72 FRTP 1 ANNEALED WITH OXYGEN 0point 07 percent MAX AND UTS 20 KGpermm MIN() Specification : OBTURATING COPPER BAND 143mm +0.6 MM O/D X 10 mm +0.75 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN) C Estab
2) OBTURATING COPPER BAND 149mm plus 0point 7 MM OD X 13 mm 2 mm WALL THICK X STANDARD LENGTH TO SPECN IS 2501 72 FRTP 1 ANNEALED WITH OXYGEN 0 point 07 percent MAX AND UTS 20 KG per mm MIN Description : OBTURATING COPPER BAND 149mm plus 0point 7 MM OD X 13 mm 2 mm WALL THICK X STANDARD LENGTH TO SPECN IS 2501 72 FRTP 1 ANNEALED WITH OXYGEN 0 point 07 percent MAX AND UTS 20 KG per mm MIN() Specification : OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN) C Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) HEAD TO SK NO OTF S 002 DRG NO 4 025998 DET NO 002 Description : HEAD TO SK NO OTF S 002 DRG NO 4 025998 DET NO 002() Specification : HEAD(TO SK. NO. OTF/S/002)DRG. NO. 4-025998 DET. NO. 002 R Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709 DC 36123 A DT 06 06 96 Description : BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709 DC 36123 A DT 06 06 96() Specification : BRASS PRESSING BLANKS TO DRG. NO. 1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG. NO. QX-1709. DC 36123-A DT 06-06-96 R Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) COPPER ALLOY TUBE ID 39point87 0point25 mm THICKNESS 3point2 mm BOTH ENDS CUT IN SQUARE IN STRAIGHT LENGTH 1point5 TO 3 MTRS AS PER SPEC NO JSS 4710 01 88 GR IV Description : COPPER ALLOY TUBE ID 39point87 0point25 mm THICKNESS 3point2 mm BOTH ENDS CUT IN SQUARE IN STRAIGHT LENGTH 1point5 TO 3 MTRS AS PER SPEC NO JSS 4710 01 88 GR IV() Specification : COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SAT R Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE Description : BRASS ROUND 38 POINT 1 PLUS 0POINT25 MM DIA TO SPECN BS 2874 CZ 121 PB3 M IN THE LENGTH OF2 MTRS MINIMUM LONG BAR LATEST ISSUE() Specification : BRASS ROUND 38.1 +0.25mm DIA TO SPECN BS-2874-CZ-121 PB3-"M" IN THE LENGTH OF2 MTRS (MINIMUM) LONG BAR. LATEST ISSUE R Estab
Category : p
Grade : 3
Size : L
1Gun and Shell Factory

[Deemed Registration]
Name Specification Use Status
1) CONE IN FINISHED CONDITION TO DRG NO SK NO OTF S 015 TO DRG NO 4 025998 DET NO 069 DC I 37003 A DT 11 3 5 SK NO OTF S 015 WITHOUT SURFACE TREATMENT Description : CONE IN FINISHED CONDITION TO DRG NO SK NO OTF S 015 TO DRG NO 4 025998 DET NO 069 DC I 37003 A DT 11 3 5 SK NO OTF S 015 WITHOUT SURFACE TREATMENT() Specification : CONE IN FINISHED CONDITION TO DRG. NO. 4-025998 DET. 069 DC(I) 37003-A DT.11/3/05 (SK. NO. OTF/S/015) WITHOUT SURFACE TREATMENT C Estab
Category : p
Grade : 3
Size : L
1364 Vanya Fasteners
G-25, Panki site-1 Panki Industrial estate Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2692062
GSTIN : 09AEZPV7186D1ZG 		KMPS06070B

Download 		1Ordnance Equipment Factory

Name Specification Use Status
1) D RING VARIOUS[21]() Specification : AS PER REQUIREMENT R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) FOUR WAY MILD STEEL JOINT[21]() Specification : AS PER REQUIREMENT & SPECIFICATION C Estab
2) THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]() Specification : AS PER REQUIREMENT & SPECIFICATION C Estab
3) THREE WAY ROOF POLE MILE STEEL JOINT[21]() Specification : AS PER TENDER C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) TENT PIN ANGLE IRON MEDIUM[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) CLIP IRON (FOR TENT EXTENDABLE)[21]() Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) MILD STEEL WIRE 6 MM DIA[21]() Specification : IS:2062-1992, DESIGN FE 410 S , 4TH REV.,AMDT.-1 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) BOLTS & NUTS STEEL VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) HOOK IRON[21]() Specification : CQA(GS)/US/467(b) (5986/PK DT. 8.9.03) EXCEPT R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) LOCK NUT M12 X 0.75[21]() Specification : IND/GS/1691(a) DET 7 A OF DRG SHEET NO7 OF11 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) NUT S.M. SQUARE 5.5 MM X 4 MM THICK X TAPPED[21]() Specification : IS:1079 LATEST R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) UNIVERSAL MEMBER (FOR TENT EXTENDABLE)[21]() Specification : DMSRDE/T&GS/84/312 (C) R Estab
2) UNIVERSAL MEMBER FOR TEFS & ROOF POLE TEFS[21]() Specification : APRQ R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) TWISTED PINS[21]() Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) HAMMERS VARIOUS[21]() Specification : AS PER REQUIREMENT & SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) PIN TENT ANGLE IRON MED. MK-2[21]() Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) Ring Iron 13MM X 3 MM DIA galvanized Wire[21]() Specification : IS: 280 R Estab
Category :
Grade : Grade III
Size : S
1365 SARU SILVER ALLOYS PRIVATE LIMITED
3, Saru Nagar - Sardhana Road, MEERUT U.P.
PIN1 : 250001
Phone No. : 9219551110 		AABCS9553L

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SILVER BRAZING ALLOY ROD Description : SILVER BRAZING ALLOY ROD() Specification : SILVER BRAZING ALLOY ROD 1/16,, DIA WO NICKLE TO SPECN. IS00-2927-1975 GD. BA CU AG-10 R Estab
Category : ddp
Grade : 3
Size : S
1366 NAVRAJ METAL WORKS
6/349 NAI BASTI GT ROAD ALIGARH-202001 NAI BASTI ALIGARH Uttar Pradesh
PIN1 : 202001
Phone No. : 8630077109
GSTIN : 09AAXPJ6163E2Z8 		AAXPJ6163E

Download 		1Ordnance Factory Chanda

Name Specification Use Status
1) 6270603200 ADDITIVE LINER IRW 162 (130MM FVC)[62]() Specification : SPECN. NO. CQA (A) 0303 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 1020871027 WAX PARAFIN SPL JSS 9160-06[10]() Specification : SPECN. NO. JSS 9160-06 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0717191065 STRIP CU ALLOY[07]() Specification : IS:3167-1982 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0832260908 FOIL LEAD TIN 63X570X 0.051MM THK[08]() Specification : SPECN. NO. JSS 9535-06 R Nonestab
2) 0832270092 STRIP TIN[08]() Specification : SPECN: SEAL TIN (FOR STEEL TAPE BANDING SIZE 12.7 MM WIDE). APPRX. SIZE 25.41 MM LENGTH X 12.7 MM WIDTH X 0.3 MM THICK AND BEND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3 MM. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0700160010 WIRE COPPER TIN COATED[07]() Specification : WIRE COPPER 0.1 MM DIA TIN COATED TO IS: 9567, 2001IS: ELONGATION: 10 % MINIMUM, BREAKING STRENGTH: MINIMUM200 N/MM2, SP. RESISTANCE 2360/KM R Nonestab
2) 0700191388 STRIP COPPER 72MM W[07]() Specification : COPPER STRIP TO BS 2870-1980 GRADE C-101, C-102, C-104 0RC-106. ANNEALED.HARDNESS 60 HV. SIZE 72 MM +/- 0.3MM WIDE X0.813 MM TOLERANCE +/- 0.13 MM THICK. COILED R Nonestab
3) 6432100002 SET OF CCC FSAPDS COMP 5 120MM FSAP[64]() Specification : SET OF COMBUSTIBLE CARTG. CASE FSAPDS TO CQA(A) DRG.NO.IRW 5GE CONSISTING OF 1)COMBUSTIBLE BODY FSAPDS TO DRG.NO.IRW 231 2)COMBUSTIBLE CAP FSAPDS IRW 236 3)COMBUSTIBLE CLOSING DISCIRW 237 4)SPACER IRW 238 5)COMBUSTIBLE CAP FSAPDS W/SPACER C Nonestab
4) 1010501024 NG BARRIER FOR 120MM FSAPDS AMMN[10]() Specification : NG BARRIER FOR 120MM FSAPDS AMMN. TO SPECN. NO.HEMRL/CCC/PS/408 SEPT. 2014 & DRG. NO. HEMRL/CCC/120/FS/2014 (ARDE DRG.NO. 1006 03 11 00 00 000 00TA FOR REFERENCE) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6270603201 ADDITIVE LINER TO DRG NO IRW 165[62]() Specification : ADDITIVE LINER TO DRG NO.IRW 165 FOR 105 MM APDS/T. SPECN.NO CQA(A) 0303(D) DCI 33783-A. MASS OF THE LINER 158 +/- 5 GM,SIZE: 430 X 395 X 335 MM. THICKNESS OF ADDITIVE LINER SHALLNOT BE MORE THAN 1.0 MM. C Nonestab
2) 0615460005 FOIL AL 25 MM[06]() Specification : FOIL ALUMINIUM SIZE 25 PLUS MINUS 0.5 MM WIDE X 0.05 PLUS 0.01 MM THICK TO SPECN. NO. IS: 737 -1986, DESIGN. 19500OR BS-1470 DESIGN. S1A OR S1B,CONDITION-M R Nonestab
3) 0832260906 FOIL LEAD TIN[08]() Specification : FOIL LEAD TIN TO SIZE 571.5 MM X 342.9 MM X 0.03 MM THICK TOSPECIFICATION JSS 9535-06 : 2010 (REVISION NO.2) DC 4085-ME R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6432100201 RESIN BASED CCC FOR 120 FSAPDS MKII[64]() Specification : RESIN BASED COMBUSTIBLE CARTG.CASE(CCC)SET (DRG.NO.10060820000000000TA (HEMRL/CCC/2013/FSMKII/SK001 SHT-1) CONSIST OF(1)BODY (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.1 SHT.2) (2)CAP(DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.2 SHT.3) (3)CLOSIN C Nonestab
2) 6432100202 RESIN BASED CCC FOR 120MM FSAPDS MK[64]() Specification : SET OF RESIN BASED CCC (COMP-3) FOR 120 MMM FSAPDS MK-I AMMNSPECN.NO.HEMRL/CCC/PS/371,REV-01,JULY 2013 & CONST.OF (I)RESIN BASED COMB.BODY TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.1,(II)CAP TO DRG.NO.HEMRL/CCC/2005/SK-003 DET.2 (III)CLOSINGDIS C Nonestab
3) 0615461060 STRIP AL[06]() Specification : STRIP ALUMINIUM SIZE 18 PLUS MINUS 0.2 MM WIDE X 0.6 PLUSMINUS 0.02 MM THICK TO SPECN.IS-737-1986 GRADE 53000 IN "O"CONDITION. R Nonestab
4) 0717591618 STRIP BRASS[07]() Specification : STRIP BRASS, SIZE 83 +/- 0.5 MM WIDE X 0.7 MM +/- 0.03 MMTHICK TO SPECN. NO. JSS 9535-02: 2008, REVISION NO.3,HARDNESS 55 TO 75 VPN. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ADDITIVE LINER 76 2 ARDE 1716 DET7 LF 6076301000 Description : ADDITIVE LINER 76 2 ARDE 1716 DET7 LF 6076301000() Specification : ADDITIVE LINER TO DRG. NO ARDE-1716 DET NO. 7 (PROVISIONAL) R. NO. 8 DATED 10/01/2012 ARD-2423.. R Nonestab
Category : p
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142[70]() Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PULL THROUGH 5 point 56 MM 1A NYLON TO DS CAT NO 1005 557944 DC I NO 26532 SA DT 30 07 10[71]() Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017 Description : WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017() Specification : PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011 R Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005 Description : LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005() Specification : LEAD PIG ORDINARY (FLAT) 500 MM LONG X 100 MM WIDE X 70 MM THICK IN WEIGHT OF 30KG,Pb-99.99% TO SPECN.IS-27-1992(FOURTH REVISION)(REAFFIRMED 2014)(AMENDMENT NO1 APRIL 1998)(AMENDMENT NO2 DECEMBER 2010). R Nonestab
Category : p
Grade : 3
Size : S
1367 ACME ENGINEERING CO
1 DESHBANDHU NAGAR ISWAR CHATTERJEE ROAD KOLKATA West Bengal
PIN1 : 700110
Phone No. : 25956070
GSTIN : 19ACRPC3584A1ZM 		ACRPC3584A

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR)[90]() Specification : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WI C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) 1) FRP COVER FOOT REST(CO-DRIVER SIDE) ; 2) FRP COVER FOOT REST (DRIVER SIDE) ; 3) FRP COVER FOOT REST (MIDDLE) 4) FRP COVER (STEERING) ; 5) FRP COVER (WIPER MOTOR)[90]() Specification : 1) FRP COVER FOOT REST(CO-DRIVER SIDE) DRG NO. 645-01-3322/A; 2) FRP COVER FOOT REST (DRIVER SIDE) DRG. NO. 645-01-3324; 3) FRP COVER FOOT REST (MIDDLE) DRG NO. 645-01-3323/A 4) FRP COVER (STEERING) DRG NO. 645-01-3325/A; 5) FRP COVER (WI C Nonestab
Category :
Grade : Grade III
Size : S
1368 INDO GULF INDUSTRIES LIMITED
NARENDRA BHAWAN 2ND FLOOR HOUSE NO. 4237/XI 1 ANSARI ROAD DARYAGANJ NEW DELHI Delhi
PIN1 : 110002
Phone No. : 23245922
GSTIN : 09AAACI0120L2ZV 		AAACI0120L

Download 		1Ordnance Factory Chanda

Name Specification Use Status
1) 6432100201 RESIN BASED CCC FOR 120 FSAPDS MKII[64]() Specification : RESIN BASED COMBUSTIBLE CARTG.CASE(CCC)SET (DRG.NO.10060820000000000TA (HEMRL/CCC/2013/FSMKII/SK001 SHT-1) CONSIST OF(1)BODY (DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.1 SHT.2) (2)CAP(DRG.NO.HEMRL/CCC/2013/FSMKII/SK001 DET.2 SHT.3) (3)CLOSIN C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) CCC SET M92[65]() Specification : 05 NOS. COMBUSTIBLE CARTRIDGE CASE DWG. NO. OFN/BMCS/M-92/CCC 05 NOS. PRD AS PER DWG. NO. OFN/BMCS/M-92/PRD 05 NOS. IGNITER TUBE AS PER DWG.NO. OFN/BMCS/M-92/IT 05 NOS. DISC SPACER DWG. NO. OFN/BMCS/M-91/M-92/DISC SPACER 01 FOAM R Nonestab
Category : dp
Grade : 3
Size : S
1369 RG POLYMERS
30, A.C.PAUL STREET A.C.PAUL STREET ARIADAHA West Bengal
PIN1 : 700057
Phone No. : 9830357140
GSTIN : 19AHSPG8571F2ZR 		AHSPG0001F

Download 		1Metal and Steel Factory

Name Specification Use Status
1) ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH AK630 as per Scope of Work[94]() Specification : "ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416 OTHER DETAILS FOR WORKS AND INSPECTION. THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. " E Nonestab
Category :
Grade : Grade III
Size : S
1370 SINHA ELECTRO CHEMICAL PLANT
C48 2ND PHASE INDUSTRIAL AREA ADITYAPUR 2ND PHASE INDUSTRIAL AREA JAMSHEDPUR Jharkhand
PIN1 : 832109
Phone No. : 9431303952
GSTIN : 20AIMPS9749J2ZK 		AIMPS9749J

Download 		1Metal and Steel Factory

Name Specification Use Status
1) ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH AK630 as per Scope of Work[94]() Specification : "ELECTRO CHEMICAL ZINC PLATING FOLLOWED BY CHROMOTISING FOR SARATH/AK630 OF STAGE COMPONENT AS PER DRG.NO.- NCC/416 OTHER DETAILS FOR WORKS AND INSPECTION. THE SCOPE OF WORK (ENCLOSED) SHOULD BE FOLLOWED. " E Nonestab
Category :
Grade : Grade III
Size : S
1371 RABWIN INDUSTRIES PRIVATE LIMITED
SF NO. 138/2, SNMV COLLEGE ROAD, MALUMICHMAPATTI POST COIMBATORE Tamil Nadu
PIN1 : 641050
Phone No. : 2611190
GSTIN : 33AAACH9312D1Z3 		AAACH9312D

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR C Nonestab
Category :
Grade : Grade III
Size : M
1372 Sheena International
B-62 Site 4 Industrial Area Sahibabad Sahibabad Uttar Pradesh Uttar Pradesh
PIN1 : 201010
Phone No. : 22071216
GSTIN : 09ABBFS1480J1Z0 		ABBFS1480J

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Double Layer Bonded Polyester Fleece white 150cm width[21] [AS SOLE SELLING AGENT OF M/S VARDHMAN YARNS, PANIPAT]() Specification : Specification- IND/TC/1208. AS PER RELEVANT CLAUSE OF SPECIFICATIONS PER RELEVANT CLAUSE OF SPECIFICATION R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Double Layer Bonded Polyester Fleece OG 150 cm width min[21] [AS SOLE SELLING AGENT OF M/S VARDHMAN YARNS, PANIPAT]() Specification : Double Layer Bonded Polyester Fleece OG 150 cm width min. (Anti Pill) SPECIFICATION:- IND/TC/1208. Anti Pilling as per sample held with OCFS R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Polyester fleece fabric knitted O G 150 cm min[21] as sole selling agent of Vardhman Yarns , Panipat() Specification : SPECN: AS PER APPENDIX 'C' OF PROV. SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG (Imp)RELEVANT CLAUSE OF SPECIFICATION NO. IND/TC/1208 AS PER SPECIFICATION NO. IND/TC/1208 R Estab
Category :
Grade : Grade III
Size : S
1373 SAI INDUSTRIES
112/8, S BLOCK, MIDC, BHOSARI BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 27120558 		PNES11187B

Download 		1Ordnance Factory Chanda

Name Specification Use Status
1) SLEEVE CAPSULE FOR PRIMER 19B() DRG. NO. IQX- 849 C Estab.
2) SLEEVE DISTANCE FOR PRIMER L1 A4() DRG. NO. HEMRL 1397 DET. NO. 5 C Estab.
3) SLEEVE CAPSULE FOR PRIMER L1 A4() DRG.NO. HEMRL 1397 DET. NO.4 C Estab.
4) SLEEVE DISTANCE() DRG. NO. QX-1147 C Estab.
5) LINER CELLULOID FOR PRIMER 19B() DRG. NO. IQX-848 C Estab.
6) SLEEVE MAGAZINE FOR PRIMER 18A() DRG. NO. IQX- 831 C Estab.
Category : DP
Grade : II
Size : S
1374 SHREE POLYMERS
W-4 ,S- BLOCK ,MIDC ,BHOSARI PUNE MAHARASHTRA
PIN1 : 411026
Phone No. : 020-56113532 		PNES13437E

Download 		1Ordnance Factory Chanda

Name Specification Use Status
1) TAPE ADHESIVE WATER PROOF FABRIC BASE ALL SIZES() SPECN. IND/ME/790(A) R Estab.
2) SLEEVE CAPSULE() DRG.NO. IQX-849 C Estab.
3) LINER CELLULOID FOR PRIMER 19A/19B() DRG. NO.IQX-848 C Estab.
Category : P
Grade : II
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048 Description : TAPE ADHESIVE W P FABRIC 50MM WIDE LF 2101773048() Specification : TAPE ADHESIVE WATER PROOF FABRIC 50 +/- 2 MM WIDE IN ROLL TO SPECN : IND/ME/790 (b): 2013 DC NO. 5266-ME DT 24/06/14. R Estab
Category : p
Grade : 3
Size : S
1High Explosive Factory

Name Specification Use Status
1) CONTAINER 120 MM[10]() Specification : CQA(A) 2303(f) DC NO. 36747-A DT 05.03.2001 Drg.No. ITV 21DC NO.36747 DT.09.03.2001 C Estab
Category : p
Grade : Grade II
Size : S
1High Explosive Factory

Name Specification Use Status
1) CONTAINER 81MM[10]() Specification : CQA(A) 2303(f) DC 36747-A DT 05.03.2001 Drg.No. ITV 6A DC NO. 36747-A DT 09.03.2001 C Estab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 2101773028 TAPE ADHESIVE WP FAB Description : 2101773028 TAPE ADHESIVE WP FAB() Specification : IND/ME/790(A C Estab
2) 2101773044 TAPE ADHESIVE WP FAB 38 MM WIDE. Description : 2101773044 TAPE ADHESIVE WP FAB 38 MM WIDE.() Specification : IND/ME/790 (A) COLOUR: BLACK C Estab
3) 2101773049 TAPE ADHESIVE WP FAB 50 MM WIDE. Description : 2101773049 TAPE ADHESIVE WP FAB 50 MM WIDE.() Specification : SPECN. IND/ME/790 (A) C Estab
4) 6070648998 SLEEVE MAG IQX 831FOR PRIMER 18 A Description : 6070648998 SLEEVE MAG IQX 831FOR PRIMER 18 A() Specification : SLEEVE MAGAZINE FOR PRIMER 18A. C Estab
5) 6070750330 SLEEVE IQX 849 ARDE 1807 PRI 19A&B Description : 6070750330 SLEEVE IQX 849 ARDE 1807 PRI 19A&B() Specification : SLEEVE, MAT.:CELLULOID TO DRAWING PART NO.IQX-849,DC 36681-A DTD.29-05-2000 FOR PRIMER 19B C Estab
6) 6070751183 LINER CELLULOID IQX848 FOR PRI 19B Description : 6070751183 LINER CELLULOID IQX848 FOR PRI 19B() Specification : LINER,MATL:CELLULOID TO DRAWING NUMBER IQX-848,DC 36785-A DATED 08/10/2001 FOR PRIMER 19B. C Estab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART Description : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART() Specification : SLEEVE MAGAZINE TO DRG.NO.ARDE-2028 PART NO.IQX-831, DC NO.36785, DT.08.10.2001 [FOR PRIMER 18A] C Estab
Category : p
Grade : 2
Size : S
1375 SUPREME PLASTICIZERS
PLOT NO. 115-C, BELAGOLA INDUSTRIAL AREA, METAGALLI MYSORE KARNATAKA
PIN1 : 570016
Phone No. : 0821-2582907, 2582934, Mob. 9845114149, 9845170909
GSTIN : 29AAEFS4895F1ZP 		BLRS15584C

Download 		1Cordite Factory Arvankadu

Name Specification Use Status
1) DI-ETHYL PHTHALATE() IS 14421-1997 R Estab.
Category : DP
Grade : II
Size : S
1376 NNF TECH PVT. LTD.
SY. No. 132, Kumbalgodu Industrial Area Mysore Road Bangalore Karnataka
PIN1 : 560074
Phone No. : 29544155
GSTIN : 29AAGCN7919Q1ZG 		AAGCN7919Q

Download 		1Small Arms Factory

Name Specification Use Status
1) Pawl for Revolver Side Swing[70]() Specification : PAWL FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/9 SW C Nonestab
2) TRIGGER FOR REVOLVER SIDE SWING[70]() Specification : TRIGGER FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/5 SW. C Nonestab
3) EJECTOR FOR REVOLVER SIDE SWING[70]() Specification : EJECTOR FOR REVOLVER 0.32 (7.65MM) SIDE SWING DRG. NO. RV-04/5 SW. C Nonestab
4) EJECTOR ROD FOR REVOLVER SIDE SWING[70]() Specification : EJECTOR ROD FOR REVOLVER 0.32 (7.65MM) SIDE SWING DRG. NO. RV-04/6 SW. R Nonestab
5) TRIGGER GUARD FOR REVOLVER SIDE SWING[70]() Specification : TRIGGER GUARD FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/1 SW. C Nonestab
6) SEAT FOR SPRING MAIN FOR REVOLVER SIDE SWING[70]() Specification : SEAT FOR SPRING MAIN FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-06/3 SW. C Nonestab
7) HAMMER STRUT FOR REVOLVER SIDE SWING[70]() Specification : HAMMER STRUT FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-06/1 SW. C Nonestab
8) HAMMER FOR REVOLVER SIDE SWING[70]() Specification : HAMMER FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/1 SW. C Nonestab
9) HAMMER PIVOT PLATE FOR REVOLVER SIDE SWING[70]() Specification : HAMMER PIVOT PLATE FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-03/13 SW. C Nonestab
10) Cylinder Latch For Revolver SIDE SWING[70]() Specification : Cylinder Latch For Revolver 0.32 SIDE SWING DRG. NO. RV-03/12 SW. C Nonestab
11) HAMMER DOG FOR REVOLVER SIDE SWING[70]() Specification : HAMMER DOG FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-05/2 SW. C Nonestab
12) PLUNGER TRIGGER GUARD FOR REVOLVER SIDE SWING[70]() Specification : PLUNGER TRIGGER GUARD FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/2 SW. C Nonestab
13) Crane Latch For Revolver Side Swing[70]() Specification : Crane Latch For Revolver 0.32 Side Swing DRG. NO. RV-03/8 SW. C Nonestab
14) Recoil Plate For Revolver Side Swing[70]() Specification : Recoil Plate For Revolver 0.32 Side Swing DRG. NO. RV-03/6 SW. C Nonestab
15) Front Latch For Revolver Side Swing[70]() Specification : Front Latch For Revolver 0.32 Side Swing DRG NO. RV-02/2 SW. C Nonestab
16) Pivot Crane Latch For Revolver Side Swing[70]() Specification : Pivot Crane Latch For Revolver 0.32 Side Swing DRG. NO. RV-03/11 SW. C Nonestab
17) TRANSFER BAR FOR REVOLVER SIDE SWING[70]() Specification : TRANSFER BAR FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-07/12 SW. C Nonestab
18) Crane and Arm For Revolver Side Swing Through MIM route[70]() Specification : Crane and Arm For Revolver 0.32 Side Swing Drg. No. RV-04/9 SW. (Through MIM route) C Nonestab
19) Plate Body For Revolver Side Swing Through MIM Route[70]() Specification : Plate Body For Revolver 0.32 Side Swing Drg. No. RV-03/2 SW. (Through MIM Route) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF DISCONNECTOR AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) EXTRACTOR MIM ROUTE IN FINISH CONDITION[70]() Specification : EXTRACTOR (MIM ROUTE) A PER DRG.NO.L-SK-0109 (IN FINISH CONDITION) C Nonestab
Category : dp
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) GUIDE THROUGH MIM ROUTE FOR AK203 DRG NO SK 6501 TE[70]() Specification : GUIDE THROUGH MIM ROUTE C Nonestab
Category : dp
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG[01]() Specification : AS PER DRG. C Nonestab
2) MOUNTING RAIL for JVPC[70]() Specification : MOUNTING RAIL C Nonestab
Category :
Grade : Grade III
Size : S
1377 Mistral Solutions Pvt Ltd
No. 60, ‘Adarsh Regent’ , Domlur Extension 100 Feet Ring Road Bangalore Karnataka
PIN1 : 560071
Phone No. : 9900182049 		AABCM8832C

Download 		1Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6191700214 INTEGRATED TELEMETRY MODULE WITH 2 W TRANSMITTER AND IMU SENSOR Description : 6191700214 INTEGRATED TELEMETRY MODULE WITH 2 W TRANSMITTER AND IMU SENSOR() Specification : SPECIFICATION NO ARDE/NAVAL/ITM/2020/01 C Nonestab
Category : p
Grade : 3
Size : S
1378 TRACTORS AND FARM EQUIPMENT LIMITED
Plot No. 10-12, INDL. Area II, CMDA INDL. Complex Maraimalai Nagar, Chengalpattu District Tamilnadu
PIN1 : 603209
Phone No. : 9940184454 		CHET00112A

Download 		1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Battery 12V 180AH Fully Charged Description : Battery 12V 180AH Fully Charged() Specification : BATTERY SMF 12V,180AH FULLY CHARGED.AMARARAJA, PART NO.264354109903-V1 ALTERNATE TAFE BATTERY PART NO.2643-5410-9903- TAFE(Ref Drg No. TAFEPSD-12V180Ah(VFJ-01)) FOR LPTA 715 BS-III VEHICLES C Estab
Category : p
Grade : 3
Size : L
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Battery F8217800 Description : Battery F8217800() Specification : BATTERY MHD1300,12V,130AH,BS-3 BATTERY MHD-1300 12V,130 AH,OR BATTERY EXIDE MF120L,MK-IV, BS-III VEHICLE PART NO.F8217800-HASE.1 ALTERNATE 12 V 130 AH BATTERY TO PT NO.F2X01300-HASH MAKE TAFE BRAND NAME AMCO C Estab
Category : p
Grade : 3
Size : L
1379 DEVYANI ENTERPRISES
Sr. No. 258, Behind MRF Tyre, Marunji Road, Mukai Nagar,At/P Hinjawadi, Tal. Mulshi Dist. Pune, Maharashtra
PIN1 : 411057
Phone No. : +91 8237107007
GSTIN : 27AAJFD6314K1ZA 		APGPP4029P

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) COLLAR NOSE TO DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942() DRG. NO. ARDE 2233 DET. NO. 1 PT. NO. ISV 1942 C Not Estab.
2) PLASTIC INDEX DISC SHOT NO.1 FOR CARTG SA 12 BORE IN YELLOW COLOUR AS PER DRG.NO.AFK/SK-2888() DRG.NO.AFK/SK-2888 C Not Estab.
3) CONTAINER TO DRG NO ARDE-1933 DET NO 4, PT.NO.ITV 170 SPECN CQA (A) 2322() CQA (A) 2322 C Not Estab.
Category : P
Grade : III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]() Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017 C Nonestab
Category : P
Grade : III
Size :
1Ammunition Factory Khadki

Name Specification Use Status
1) TRI PLASTIC TUBE FOR SA 12 BORE 70M[21]() Specification : DRG. NO. AFK/SK-563-08 R Nonestab
2) TRIMMED PLASTIC TUBE[21]() Specification : DRG NO AFK/SK-564-08 R Nonestab
Category : P
Grade : III
Size :
1380 BEL TECH EXPORTS (INDIA) PVT. LTD.
402A, EROS CORPORATE TOWER, NEHRU PLACE NEW DELHI NEW DELHI
PIN1 : 110019
Phone No. : 011-41660501
GSTIN : 06AADCB7229A1Z5 		DELB10867D

Download 		1Opto Electronic Factory

[Deemed Registration]
Name Specification Use Status
1) Opto Electronics Products[As per OLF specifications]() As per OLF specifications C Estab.
2) Upgradation of Opto Electronics Products[As per OLF specifications]() As per OLF specifications C Estab.
Category : S
Grade : III
Size : S

Copyright © 2025 - OFB