OFB Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

List of registered vendors

Search

Reset

Sort by

Name, Address & Phone No.

Vendor Code

Factory

Products

Category, Grading, Size

1161

Classic Foam Industries
134, Awadpuri, Kanpur University Kanpur Uttar Pradesh
PIN1 : 208024
Phone No. : 2580331
GSTIN : 09ACXPK1726G2Z8

KNPC01418E

Download

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) P U FOAM 3.00 MM THICK X 0.90M X 1.90M[21](OEM is M/s Ashoka PU Foam (India) Pvt. Ltd., Bareilly)()	Specification : IS:7888-1976 & APPENDIX "G" OF IND/TC/3844	R	Estab
2) POLY URETHANE FOAM 8 MM THICK X 90 CM X 190 CM[21](OEM is M/s Ashoka PU Foam (India) Pvt. Ltd., Bareilly)()	Specification : AS PER APPENDIX "G" OF IND/TC/3844 (a)	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) POLYTHENE FILM OF SIZE- O.O4 MM THICK X 120 CMS WIDE FOR PACKING[21] (OEM is M/s Bhatia Plastics, Kanpur)()	Specification : IS:2508-1984 (2ND REV.)	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) LATEX FOAM VARIOUS()	AS PER REQUIREMENT & SPECIFICATION	R

Category : P
Grade : III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) WOOLLEN FELT 3 MM THICK[2101877099]()	Specification : SPECN NO:IS:1719-1988.	R	Nonestab
2) FELT WOOLLEN 6 MM MOTH PROOF[2101226032]()	Specification : SPECN.NO.IS:1719-2000	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) H.D.P.E.SHEET 1.5 MM THICK[2101291996]()	Specification : SPCN. BEST TRADE QUALITY	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) LDPE SHEET +2-0 MM THICK[2110065015]()	Specification : AS PER SPECIFICATION	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) COTTON PADDING 37 CM x 1.5 MM THICK[2101099937]()	Specification : SPECIFICATION NO. : AS PER APPROVED SAMPLE.	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) COTTON PADDING LENGTH=2100 MM,WIDTH=1900 MM,THICKNESS=15 TO 20 MM.[2101126399]()	Specification : SPECN-BEST TRADE QUALITY.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) COTTON PADDING 2 THICK 135 CM WIDTH[2101126417]()	Specification : SPECN-APPROVED QUALITY	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) FABRICATION OF NUMBER PLATE IN BILINGUAL IDENTIFICATION LABEL FOR KM FLOAT[2510094049]()	Specification : SPECN-DRG.NO.IMPD-0928/1 NOTE-PLATES WILL BE PREPARED AFTER COMBINATION OF SERIAL NO. PLATES WILL BE PREPARED AFTER CONFIRMATION OF SERIEL NO.& YEAR 05 MTR.FROM FLOAT SHOP OF OPF	R	Nonestab

Category :
Grade : Grade III
Size : S

1162

LAXMI KONARK PRECISION TECHNIICS
SHED NO.11 B TYPE 1 I.E KUKATAPALLY HYDERABAD 500072 PRASHANTH NAGAR, KUKATPALLY HYDERERABAD Telangana
PIN1 : 500072
Phone No. : 23720276
GSTIN : 36AABFL6438L1Z0

HYDL00611C

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR[70]()	Specification : PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]()	Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Head Breech Bolt for 0.315 Sporting Rifle()	Drg. No. TEND 2045	C	Established
2) Extractor for 0.315 Sporting Rifle()	Drg. No. 29P 0020*2	C	Established

Category : DDP,DP
Grade : I,II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL	C	Estab
2) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. NO. K 2025	C	Estab
3) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL	C	Estab
4) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL	C	Estab
5) SUPPLY OF TRUNNION AS PER DRG NO. K 4002 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL	C	Estab
6) SUPPLY OF DISCONNECTOR AS PER DRG NO.K-2065 WITHFRMS MATERIAL[70]()	Specification : AS PER DRG NO.K-2065 WITHFRMS MATERIAL	C	Estab
7) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()	Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL	C	Estab
8) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()	Specification : AS PER DRG. NO. K 2012	C	Estab
9) LOWER HAND GUARD BAND AS PER DRG NO. K 1204 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL	C	Estab
10) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 2023	C	Estab

Category : DDP,DP
Grade : I,II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 2023	C	Estab
2) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG No K 2031	C	Estab
3) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Estab
4) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Estab
5) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()	Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE	C	Estab

Category : DDP,DP
Grade : I,II
Size :

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()	Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)	C	Nonestab
2) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()	Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION	C	Nonestab
3) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()	Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()	Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL	C	Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) CONVERSION FORG TO DRG NO 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR GAS PISTON C3009[00]()	Specification : AS PER DRG OF CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009	C	Nonestab
2) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL	C	Nonestab
3) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()	Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Eliminator Flash()	ICR - 1576	C	Established
2) Conversion of Body()	ICR 1325	C	Established
3) Carrier Breech Block()	ICR 1268	C	Established

Category : DDP,DP
Grade : I,II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()	Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL	C	Estab

Category : DDP,DP
Grade : I,II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]()	Specification : AS PER OFB REQ	C	Nonestab
2) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 REQ FOR AMR[70]()	Specification : AS PER REQ	C	Nonestab
3) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 ST 2[70]()	Specification : AS PER REQ	C	Nonestab
4) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()	Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001	C	Nonestab
5) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL	C	Nonestab
6) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL	C	Nonestab
7) T SLOT BRACKET TO DRG NO 44P 05106ST[70]()	Specification : AS PER OFT REQUIREMENT	R	Nonestab
8) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()	Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL	C	Nonestab
9) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
10) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()	Specification : AS PER OFT REQUIRMENTS	R	Nonestab
11) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()	Specification : AS PER OFT REQUIREMENT	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()	Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) DRIFT DIA 4 X 60MM TO DRG NO 32P 5003. REQD FOR UBGL.[42]()	Specification : AS PER DRAWING NO 32P 5003. REQD FOR UBGL	E	Nonestab
2) DRIFT TO DIA 2.4 X 35 MM TO DRG NO 32P 5002. REQD FOR UBGL[42]()	Specification : AS PER DRG NO 32P 5002. REQD FOR UBGL	E	Nonestab
3) MFG & SUPPLY OF SPRING LEVER LOCKING BARREL TO DRG NO.32P1008*5 FULLY FINISHED WITH FIRM'S MATERIAL REQUIRED FOR 40MM UBGL[70]()	Specification : AS PER DRG NO.32P1008*5	E	Nonestab
4) SEMI FINISHED BLANK PIN LEVER TRIGGER AND PIN FIRING FOR 40MM UBGL TO DRG NO. TEND 2193 WITH FIRM'MATERIAL[70]()	Specification : AS PER DRAWING	C	Nonestab
5) SEMI FINISHED BLANK PIN CATCH FOR 40MM UBGL TO DRG NO. TEND 2191 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRAWING	C	Nonestab
6) SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRAWING	C	Nonestab
7) SEMI FINISHED BLANK PIN FOR EJECTOR & SEAR FOR 40MM UBGL TO DRG NO. TEND 2190 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRAWING	C	Nonestab
8) FORE SIGHT D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.[70]()	Specification : AS PER D.S.CAT.No.: 1005-001540, D.C.No.:26763-SA DT:23/06/2015 FOR D.C.No. LATEST TO BE FOLLOWED.	C	Nonestab
9) NUT LOCK FORESIGHT TO DRG.NO.32P 1311*3 FOR 40MM UBGL WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRAWING	C	Nonestab
10) SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL[70]()	Specification : AS PER DRAWING	C	Nonestab
11) SCREW HOUSING LADDER SIGHT TO DRG NO.32P 1030*4 (FULL FINISHD) WITH FIRM'S MATERIAL FOR 40MM UBGL[70]()	Specification : AS PER DRAWING	C	Nonestab
12) MFG & SUPPLY OF LEVER LOCKING PIN TO DRG.NO 32P 4713 (M) WITH FIRM'S MATERIAL FOR UBGL[70]()	Specification : AS PER DRAWING	C	Nonestab
13) MFG & SUPPLY OF LEAF SPRING COCKING ARM TO DRG.NO.32P 4102 WITH FIRM'S MATERIAL FOR UBGL[70]()	Specification : AS PER DRAWING	C	Nonestab
14) CATCH MAGAZINE TO DRG.NO: 29P 0045* required for 0.315[03]()	Specification : AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle	C	Nonestab
15) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315[70]()	Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle	C	Nonestab
16) SEAR TO DRG NO.29P 0060*2 required for 0.315[70]()	Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle	C	Nonestab
17) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315[03]()	Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle	C	Nonestab
18) HEAD BREECH BOLT TO DRG. NO.TEND.2045 required for 0.315[70]()	Specification : AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle	C	Nonestab
19) BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315[70]()	Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle	C	Nonestab
20) PIN TRIGGER TO DRG NO.: 29P 0041* required for 0.315[70]()	Specification : AS PER DRG NO.: 29P 0041* required for 0.315" Sporting Rifle	C	Nonestab
21) BLADE FORE SIGHT 29P 0004* required for 0.315[70]()	Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle	C	Nonestab
22) SCREW BAND INNER TO DRG. NO.29P 0051* required for 0.315[70]()	Specification : AS PER DRG. NO.29P 0051* required for 0.315" Sporting Rifle	C	Nonestab
23) PIN FIXING BAND BACK SIGHT TO DRG.No.: 29P 0006 required for 0.315[70]()	Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle	C	Nonestab
24) SCREW PLATE BUTT TO DRG.NO. 29P 0059* required for 0.315[70]()	Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle	C	Nonestab
25) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315[70]()	Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle	C	Nonestab
26) CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315[00]()	Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle	C	Nonestab
27) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL	C	Nonestab
28) FIRING PIN AS PER DRG No. K 2015 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL	C	Nonestab
29) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No. K 2031 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG No. K 2031 WITH FIRM'S MATERIAL	C	Nonestab
30) SELECTOR LEVER AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL	C	Nonestab
31) DRIFT AS PER DRG No. K 9004 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG No. K 9004 WITH FIRM'S MATERIAL	C	Nonestab
32) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL	C	Nonestab
33) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL	C	Nonestab
34) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL	C	Nonestab
35) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL	C	Nonestab
36) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL	C	Nonestab
37) WASHER SPRING SINGLE COIL TYPE B STEEL ZINC PLATED (NOMINAL SIZE)6MM CAT/PT.NO.G1/5310-001434 SPECN.IS:3063:1972 & SS NO.CIGS/SS/173(D).THICKNESS OF ZINC PLATING TO IS 1573-1970 SERVICE CONDN.NO.1(GR.FE ZN 5)CHROMEPASSIVATED[17]()	Specification : AS PER DRG	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()	Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL	C	Estab
2) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()	Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL	C	Estab
3) SUPPLY OF REAR SIGHT LEAF[70]()	Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL	C	Estab
4) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL	E	Estab
5) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. NO. K 2025	C	Estab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No. K 2031 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG No. K 2031 WITH FIRM'S MATERIAL	C	Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Estab
3) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 2023	C	Estab
4) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Estab
5) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()	Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE	C	Estab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL	C	Estab
2) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL	C	Estab
3) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL	C	Estab
4) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL	C	Estab
5) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Estab
6) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL	C	Estab
7) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]()	Specification : AS PER DRG. NO. K 2012	C	Estab
8) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL	C	Estab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()	Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle	E	Nonestab
2) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()	Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA	C	Nonestab
3) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()	Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()	Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001 AS PER DRG NO TEND 2449STR2 WITH OFT RAW MATERIAL[70]()	Specification : AS PER DRG NO.TEND 2449*2 WITH OFT RAW MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()	Specification : AS ER DRG No.TEND 2508 (for K 1207)	R	Nonestab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()	Specification : AS PER DRG No.TEND :2509 (for K-1202)	C	Nonestab
3) AUTO SEAR BLANK FOR ASSAULT RIFLE ( L.F.No.7024002517)[70]()	Specification : As per Drg. No.TEND 2517 (for K 2067)	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]()	Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]()	Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Block Gas to ICR 1322 with OFT material[70]()	Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl	C	Nonestab
2) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()	Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()	Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470	C	Nonestab
2) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]()	Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) MOUNTING RAIL for JVPC[70]()	Specification : MOUNTING RAIL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Barrel Extension Blank up to Stage V for JVPC[70]()	Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()	Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.	C	Estab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) BLOCK GAS IN FINISH CONDITION FOR MAG[70]()	Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)	C	Nonestab
2) Receiver Body for 9X19 mm Machine Pistol[70]()	Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing	C	Nonestab
3) FEED TRAY INTEGRATED FOR LMG BELT FED[70]()	Specification : FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED	C	Nonestab
4) CYLINDER GAS FOR LMG BELT FED[70]()	Specification : CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED	C	Nonestab
5) Barrel Mount for 9X19 mm Machine Pistol[70]()	Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing	R	Nonestab
6) Locking Rear Block for 9X19 mm Machine Pistol[70]()	Specification : Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA	C	Nonestab
7) Rear sight for 9X19 mm Machine Pistol[70]()	Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA	C	Nonestab
8) LATCH AS PER DRAWING NO SK 6519 TE[70]()	Specification : LATCH AS PER DRAWING NO SK 6519 TE	C	Nonestab
9) SIGHT LEAF DRG No SK 6540 TE[70]()	Specification : SIGHT LEAF DRG No SK-6540/TE	C	Nonestab
10) SLIDE DRG No SK 6534 TE[70]()	Specification : SLIDE DRG No SK-6534/TE	C	Nonestab
11) LATCH DRG No SK 6535 TE[70]()	Specification : LATCH DRG No SK- 6535 /TE	C	Nonestab
12) Cleaning Rod Drg No SK 6574 TE[70]()	Specification : Cleaning Rod Drg No. SK- 6574/ TE	C	Nonestab
13) RAIL SK 6548 TE[70]()	Specification : RAIL SK-6548/ TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1163

B B Investment Casting
Plot no : 2205 / 2206, Road no : A, Metoda GIDC, Metoda Dist : Rajkot Road no - A At : Metoda, Dist : Rajkot Gujarat
PIN1 : 360021
Phone No. : 287897
GSTIN : 24AAGFB6578C1ZK

AAGFB6578C

Download

1) Opto Electronic Factory

Name	Specification	Use	Status
1) INVESTMENT CASTING FOR BOARD LF NO 9927099227[99]()	Specification : INVESTMENT CASTING FOR BOARD LF NO 9927099227	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) Holder to Drg. No. D-4078830 Rev 'A'()	Specification : As per Drg . No. D-4078830 Rev. 'A'	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG. NO.SK-3665* REQUIRED FOR REVOLVER SHIELD D.A. NO. 35/04 DT. 09-04-04[01]()	Specification : AS PER DRG.	C	Nonestab
2) Investment Casting for Catch Magazine Drg. No. SK-3527[03]()	Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE	C	Nonestab
3) Steel Investment Casting for CAP to DRG No. SK-3870*2[01]()	Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1	C	Nonestab
4) Investment Casting to DRG No. SK-3713*1 for Guard Back Sight[01]()	Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight	C	Nonestab
5) INVESTMENT CASTING FOR BLOCK TOP TO DRG. NO.SK-3868*.[01]()	Specification : As per DRG.	C	Nonestab
6) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09[01]()	Specification : AS PER DRG.	C	Nonestab
7) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10[01]()	Specification : AS PER DRG.	C	Nonestab
8) INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE[01]()	Specification : AS PER DRG.	R	Nonestab
9) INVESTMENT CASTING TO DRG NO.SKM-775*1 FOR STOP CARTRIDGE OF MAG 7.62MM[01]()	Specification : AS PER DRG.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting of Trigger for Revolver[01]()	Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting Cocking bracket for JVPC[70]()	Specification : Investment Casting Cocking bracket for JVPC Drg. No. 0204-03-02-00-01-001-00XD	C	Nonestab
2) Investment Casting Housing Rear Sight for JVPC[01]()	Specification : Investment Casting Housing Rear Sight for JVPC 5.56 MM, Drg. No. SK-JVPC-598*	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2[01]()	Specification : AS PER DRG.	R	Nonestab
2) INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2[01]()	Specification : AS PER DRG.	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting for Housing Rear Sight for LMG[01]()	Specification : INVESTMENT CASTING FOR HOUSING REAR SIGHT AS PER DRG NO.SK-3647*1.	C	Nonestab
2) INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2[01]()	Specification : AS PER DRG.	C	Nonestab
3) INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2[01]()	Specification : AS PER DRG.	C	Nonestab
4) INVESTMENT CASTING OF GAS REGULATOR TO DRG.NO. SK-3706/8*[01]()	Specification : AS PER DRG.	C	Nonestab
5) INVESTMENT CASTING OF BRACKET FOR TR1POD. AS PER DRG. NO.SK-3706/3. DA NO.204/2K DT.06.12.2K.[01]()	Specification : AS PER DRG.	C	Nonestab
6) INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.[01]()	Specification : AS PER DRG.	C	Nonestab
7) INVESTMENT CASTING OF HINGE COVER TO DRG. NO-SK-4760/05*1.[01]()	Specification : AS PER DRG.	C	Nonestab
8) INVESTMENT CASTING LUG TRIPOD AS PER DRG NO SK 3706 15[03]()	Specification : AS PER DRG.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE[01]()	Specification : AS PER DRG.	C	Nonestab
2) INVESTMENT CASTING TO DRG NO.SKM-775*1 FOR STOP CARTRIDGE OF MAG 7.62MM[14]()	Specification : AS PER DRG.	C	Nonestab
3) INVESTMENT CASTING TO DRG NO SKM 753 3 FOR REAR SIGHT RAMP[14]()	Specification : INVESTMENT CASTING TO DRG NO.SKM-753*3 FOR REAR SIGHT RAMP.	C	Nonestab
4) INVESTMENT CASTING TO DRG NO SKM 752 2 FOR BRACKET CARRYING HANDLE[15]()	Specification : INVESTMENT CASTING TO DRG.NO.SKM-752*2 FOR BRACKET CARRYING HANDLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG. NO.SK-3665* REQUIRED FOR REVOLVER SHIELD D.A. NO. 35/04 DT. 09-04-04[01]()	Specification : AS PER DRG.	C	Nonestab
2) Investment Casting for Catch Magazine for Carbine 9MM[03]()	Specification : AS PER Drg. No. SK-3527 FOR 9 MM CARBINE	C	Nonestab
3) Steel Investment Casting for CAP for Carbine 9mm[01]()	Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1	C	Nonestab
4) Investment Casting for Guard Back Sight for Carbine 9MM[01]()	Specification : Investment Casting to DRG No. SK-3713*1 for Guard Back Sight	C	Nonestab
5) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09[01]()	Specification : AS PER DRG.	C	Nonestab
6) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10[01]()	Specification : AS PER DRG.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting Bracket fore Sight for JVPC[01]()	Specification : Investment Casting Bracket Fore Sight JVPC 5.56mm as per Drg. No. SK-JVPC-6004*	C	Nonestab
2) Investment Casting Cocking bracket for JVPC[70]()	Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*	C	Nonestab
3) Investment Casting Housing Rear Sight for JVPC[01]()	Specification : INVESTMENT CASTING HOUSING REAR SIGHT FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6005	C	Nonestab
4) INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC[01]()	Specification : INVESTMENT CASTING FOR MOUNTING RAIL OF JVPC 5.56X30MM AS PER DRAWING NO.SK JVPC 919.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.[70]()	Specification : INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF TRIGGER (RFI SK-9100) FOR 12 BORE PAG, MATERIAL- BS:3146 PART I 1974 CLASS 5 GRADE A	C	Nonestab
2) PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR.[70]()	Specification : MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR.[70]()	Specification : MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF GUARD TRIGGER[70]()	Specification : INVESTMENT CASTING OF GUARD TRIGGER TO RFI SK.NO.4312*12(LATEST DC.04/003/05 DT.17/02/05).FOR .315" SPORTING RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTINGS OF BOLT LOCKING[70]()	Specification : INVESTMENT CASTING OF BOLT LOCKING TO RFI.SK.NO.3712/C(LATEST DC-NIL DT.30/6/03) FOR.315"SPORTING RIFLE.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]()	Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF RETAINER SPRING RECOIL MODIFIED FOR RIFLE 5 56 MM INSAS[79]()	Specification : INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED)AS PERTG/EME.NEW DELHI. TO RFI SK NO.8064-S. FOR RIFLE 5.56 MM INSAS.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF CONNECTOR BUTT EXR OF RIFLE 5.56MM EXCALIBUR MK.1[70]()	Specification : BS	C	Nonestab
2) INVESTMENT CASTING OF TRIGGER FOR 12 BORE PAG.[70]()	Specification : bs	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG	C	Nonestab
2) INVESTMENT CASTING OF BODY FOR 12 BORE PAG.[70]()	Specification : MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A'	C	Nonestab
3) INVESTMENT CASTING OF RECEIVER FOR 0.32[70]()	Specification : bs	C	Nonestab
4) INVESTMENT CASTING FOR HINGE COVER. FOR RLFLE 5.56MM INSAS.[70]()	Specification : bs	C	Nonestab
5) INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED) FOR RIFLE 5.56 MM INSAS.[70]()	Specification : bs	C	Nonestab
6) INVESTMENT CASTING FOR SLIDE(RETRACTING) FOR RIFLE 5.56MM INSAS.[70]()	Specification : bs	C	Nonestab
7) INVESTMENT CASTING OF BRACKET(WITH HEAT TREATMENT) FOR RIFLE 5.56MM.INSAS.[70]()	Specification : bs	C	Nonestab
8) INVESTMENT CASTING OF HOUSING SIGHT REAR FOR RIFLE 5.56MM INSAS.[70]()	Specification : INVESTMENT CASTING OF HOUSING SIGHT REAR TO RFI SK. NO. 6093*6. (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.	C	Nonestab
9) INVESTMENT CASTING OF BODY FOR PISTOL AUTO 9MM 1A.[70]()	Specification : INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A.	C	Nonestab
10) INVESTMENT CASTING FOR CATCH SAFETY FOR PISTOL AUTO 9MM 1A.[70]()	Specification : INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.	C	Nonestab
11) INVESTMENT CASTING OF LEVER CHANGE FOR RIFLE 5.56MM INSAS.[70]()	Specification : INVESTMENT CASTING OF LEVER CHANGE TO RFI SK-4686*9 (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF SLIDING KNOB (RFI SK NO - 9101) FOR12 BORE PAG	C	Nonestab
2) PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR.[70]()	Specification : MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2	C	Nonestab
3) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN[70]()	Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN	C	Nonestab
4) INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS[70]()	Specification : AS PER DRAWING	C	Nonestab
5) INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*13FOR RIFLE 5.56MM INSAS[70]()	Specification : AS PER DRAWING	C	Nonestab
6) INVESTMENT CASTING FOR TRIGGER AS PER RFI SK.3651*3. FOR 9MM AUTO PISTOL[70]()	Specification : AS PER DRAWING	C	Nonestab
7) INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A[70]()	Specification : AS PER DRAWING	C	Nonestab
8) INVESTMENT CASTING OF CATCH MAGAZINE TO RFI SK.NO.5743*5(DC RFI NO.04/004/07). FOR .315[70]()	Specification : AS PER DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING FOR SLIDE RETRACTINGTO FOR RIFLE 5 56MM INSAS[79]()	Specification : INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING FOR CATCH SAFETY FOR PISTOL AUTO 9MM 1A[70]()	Specification : INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG[70]()	Specification : INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG	C	Nonestab
2) INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.[70]()	Specification : INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.	C	Nonestab
3) INVESTMENT CASTING OF RECEIVER FOR 0.32[70]()	Specification : bs	C	Nonestab
4) INVESTMENT CASTING FOR CATCH SAFETY FOR PISTOL AUTO 9MM 1A.[70]()	Specification : INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.	C	Nonestab
5) INVESTMENT CASTINGS OF BOLT LOCKING TO RFI.SK.NO.3712/C(LATEST DC-NIL DT.30/6/03) FOR.315[70]()	Specification : AS PER DRAWING	C	Nonestab
6) INVESTMENT CASTING OF GUARD TRIGGER TO RFI SK.NO.4312*12(LATEST DC.04/003/05 DT.17/02/05).FOR .315[70]()	Specification : AS PER DRAWING	C	Nonestab
7) INVESTMENT CASTING OF HANDLE BOLT BREECH AS PER RFI SK NO8273*-T .FOR 30-06 SPORTING RIFLE[70]()	Specification : AS PER DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF BODY for 9mm auto pistol[70]()	Specification : INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*6FOR PISTOL AUTO 9MM 1A (LT.DC.NO.02/03/19 DT.02-03-19)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]()	Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF RETAINER SPRING RECOIL MODIFIED FOR RIFLE 5 56 MM INSAS[79]()	Specification : INVESTMENT CASTING OF RETAINER SPRING RECOIL. FOR RIFLE 5.56 MM INSAS.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN[70]()	Specification : INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN FROM TRADE SOURCES RFI SK NO. -9093-GG/A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING FOR SLIDE RETRACTINGTO FOR RIFLE 5 56MM INSAS[79]()	Specification : INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*14FOR RIFLE 5.56MM INSAS	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING HINGE COVER FOR INSAS[70]()	Specification : INVESTMENT CASTING TO RFI SK. NO. 6097*12 FOR HINGE COVER.FOR RLFLE 5.56MM INSAS	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]()	Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()	Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).	C	Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG. NO. TEND 2206 * 2 REQD. FOR TRIGGER TO DRG.NO.30P 3051 FOR 40 mm MGL.[70]()	Specification : AS PER DRAWING AND SPECIFICATION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG. NO. TEND 2209 ST FOR BLOCK STOCK TO DRG. NO. 30P 5001 FOR 4mm MGL.[70]()	Specification : AS PER DRAWING AND SPECIFICATION	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315 Sporting Rifle[70]()	Specification : AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle	C	Nonestab
2) INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315 SPORTING RIFLE (29P00005*)[70]()	Specification : AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG.NO. TEND 2211*3 REQUIRED FOR PLATE INDEX TO DRG. NO. 30P 1214[70]()	Specification : As per the Drawing and Specification	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Investment casting to DRG. No. TEND 2210*2. Reqd. for HOUSING PLUG GAS to DRG. No. 30P 1401 for 40mm MGL[70]()	Specification : As per Drawing	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()	Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()	Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).	C	Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)	C	Nonestab
3) Bar locking Slider C1058[70]()	Specification : Bar locking Slider C1058	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Barrel Extension Assembly[74]()	Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN	E	Nonestab
2) COVER ASSEMBLY[74]()	Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN	E	Nonestab
3) Pin Assembly Trigger Bar of M2HB Gun[74]()	Specification : Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun	C	Nonestab
4) Pin Assembly Breech Lock of M2HB Gun[74]()	Specification : Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun	C	Nonestab
5) Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun[74]()	Specification : Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun	C	Nonestab
6) Blade Front Sight OOW50BMG as per Drawing No 6008934 of M2HB Gun[74]()	Specification : Blade, Front Sight, OOW50BMG as per Drawing No. 6008934 of M2HB Gun	C	Nonestab
7) Pawl Cover Detent OOW50BMG as per Drawing No 7313069 of M2HB Gun[74]()	Specification : Pawl, Cover Detent, OOW50BMG as per Drawing No. 7313069 of M2HB Gun	C	Nonestab
8) Screw Externally relieved Body OOW50BMG as per Drawing No 7312028 of M2HB Gun[74]()	Specification : Screw, Externally relieved Body, OOW50BMG as per Drawing No. 7312028 of M2HB Gun	C	Nonestab
9) Screw Machine Flat Countersunk Head OOW50BMG as per Drawing No 5153191 of M2HB Gun[74]()	Specification : Screw, Machine, Flat Countersunk Head, OOW50BMG as per Drawing No. 5153191 of M2HB Gun	C	Nonestab
10) Spring Locking Barrel OOW50BMG as per Drawing No 7266134 of M2HB Gun[74]()	Specification : Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun	C	Nonestab
11) Screw Lock Breech Bearing OOW50BMG as per Drawing No 5013530 of M2HB Gun[74]()	Specification : Screw Lock, Breech Bearing, OOW50BMG as per Drawing No. 5013530 of M2HB Gun	C	Nonestab
12) Nut Bolt Latch Rod OOW50BMG as per Drawing No 5013526 of M2HB Gun[74]()	Specification : Nut, Bolt Latch Rod, OOW50BMG as per Drawing No. 5013526 of M2HB Gun	C	Nonestab
13) Peel Away Shim Trunnion Block OOW50BMG as per Drawing No 6008982 PA of M2HB Gun[74]()	Specification : Peel Away Shim, Trunnion Block, OOW50BMG as per Drawing No. 6008982-PA of M2HB Gun	C	Nonestab
14) Pin Belt Holding Pawl OOW50BMG as per Drawing No 7162872 of M2HB Gun[74]()	Specification : Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun	C	Nonestab
15) Bearing Breech OOW50BMG as per Drawing No 6008920 of M2HB Gun[74]()	Specification : Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun	C	Nonestab
16) Screw Breech Lock Cam OOW50BMG as per Drawing No 5152938 of M2HB Gun[74]()	Specification : Screw, Breech Lock Cam, OOW50BMG as per Drawing No. 5152938 of M2HB Gun	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315[70]()	Specification : AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle	C	Nonestab
2) INVESTMENT CASTING TO TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315[70]()	Specification : AS PER TEND DRG. No.2310, FOR BAND BACK SIGHT OF 0.315" SPORTING RIFLE (29P00005*)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()	Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).	C	Nonestab
2) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026[70]()	Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).	C	Nonestab
2) INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).[70]()	Specification : AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).	C	Nonestab
3) INVESTMENT CASTING TO DRG No 64C 5021 250 I3 REQUIRED FOR PAWL TO DRG NO 2A42 05 024 C5024[70]()	Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).	C	Nonestab
4) INVESTMENT CASTING TO DRGNo 64C 5028 250 H3 REQD FOR CONNECTING LINK RIGID DRG No 2A42 05 028 C5028[70]()	Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5028 250 H3. REQD FOR CONNECTING LINK RIGID (DRG.No. 2A42.05.028) (C5028)	C	Nonestab
5) INVESTMENT CASTING TO DRG NO 64C 5089 250 G3 REQD FOR CATCH BODY TO DRG NO 2A42 05 089 C5089[70]()	Specification : AS PER DRG TO INVESTMENT CASTING TO DRG NO 64C 5089 250 G3. REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)	C	Nonestab
6) INVESTMENT CASTING TO DRG No 64C 5111 250 K3 ALT REQUIRED FOR HANDLE TO DRG No 2A42 05 111 C5111[70]()	Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5111 250 K3 ALT. REQUIRED FOR HANDLE TO DRG.No. 2A42 05 111 (C5111)	C	Nonestab
7) INVESTMENT CASTING TO DRG No 64C 5112 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 112[42]()	Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5112 250 G3. REQUIRED FOR CONNECTING LINK, RIGID (DRG.NO.2A42 05 112)	S	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN. A 1013 "	C	Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1012 250 E3 FOR FLASH HIDER[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER "	C	Nonestab
3) INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER. "	C	Nonestab
4) INVESTMENT CASTING TO DRG No 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT "	C	Nonestab
5) INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN.[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN. "	C	Nonestab
6) INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN. "	C	Nonestab
7) INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN.[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG NO. 62C 7009 250 F3 LEVER SEAR FOR 12.7 A.D. GUN. "	C	Nonestab
8) INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025) "	C	Nonestab
9) INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022)[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6022 250 E3 FOR BLOCK GUIDE LEVER FEED. (A6022) "	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SLEEVE LIMITER[74]()	Specification : SLEEVE LIMITER (View)066427A-00 FOR STAND WEAPON ASSY OF SRCG.	C	Nonestab
2) PIN FRONT 1 ASSY[74]()	Specification : PIN FRONT 1 ASSY (VIEW)077901A-00 FOR STAND WEAPON ASSY OF SRCG.	C	Nonestab
3) PIN REAR 1[74]()	Specification : PIN REAR 1 (VIEW) 077902A-00PIN FOR STAND WEAPON ASSY OF SRCG.	C	Nonestab
4) BASE BLOCK[74]()	Specification : BASE BLOCK/065286A-00 FOR STAND WEAPON ASSY OF SRCG.	C	Nonestab
5) PUSHER TRIGGER[74]()	Specification : PUSHER TRIGGER (View)Y05288A-01 FOR STAND WEAPON ASSY OF SRCG.	C	Nonestab
6) Barrel Extension Assembly[74]()	Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN	E	Nonestab
7) COVER ASSEMBLY[74]()	Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN	E	Nonestab
8) SLIDE ASSEMBLY RETRACTING[74]()	Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN	E	Nonestab
9) Pin Assembly Trigger Bar of M2HB Gun[74]()	Specification : Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun	C	Nonestab
10) Pin Assembly Breech Lock of M2HB Gun[74]()	Specification : Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun	C	Nonestab
11) Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun[74]()	Specification : Cover Front Sight OOW50BMG as per Drawing No 6008935 of M2HB Gun	C	Nonestab
12) Blade Front Sight OOW50BMG as per Drawing No 6008934 of M2HB Gun[74]()	Specification : Blade, Front Sight, OOW50BMG as per Drawing No. 6008934 of M2HB Gun	C	Nonestab
13) Pawl Cover Detent OOW50BMG as per Drawing No 7313069 of M2HB Gun[74]()	Specification : Pawl, Cover Detent, OOW50BMG as per Drawing No. 7313069 of M2HB Gun	C	Nonestab
14) Screw Externally relieved Body OOW50BMG as per Drawing No 7312028 of M2HB Gun[74]()	Specification : Screw, Externally relieved Body, OOW50BMG as per Drawing No. 7312028 of M2HB Gun	C	Nonestab
15) Spring Locking Barrel OOW50BMG as per Drawing No 7266134 of M2HB Gun[74]()	Specification : Spring, Locking Barrel, OOW50BMG as per Drawing No. 7266134 of M2HB Gun	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG No 64C 2028 250 J3 REQUIRED FOR BRAKE TO DRG No 2A42 02 028 C2028[70]()	Specification : AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 2028 250 J3. REQUIRED FOR: BRAKE TO DRG.No.: 2A42.02.028 (C2028)	C	Nonestab
2) TRIGGER TO DRG NO 44P 06008 REQ FOR AMR[70]()	Specification : AS PER REQ	C	Nonestab
3) CATCH MAGAZINE[70]()	Specification : AS PER DRAWING	C	Nonestab
4) IC FRONT SIGHT BLOCK AS PER DRG NO IC K 1207[70]()	Specification : IC FRONT SIGHT BLOCK AS PER DRG NO. IC K 1207 FOR 7.62 MM TAR	R	Nonestab
5) Barrel Extension Assembly[74]()	Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN	E	Nonestab
6) COVER ASSEMBLY[74]()	Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN	E	Nonestab
7) SLIDE ASSEMBLY RETRACTING[74]()	Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN	E	Nonestab
8) Pin Assembly Trigger Bar of M2HB Gun[74]()	Specification : Pin Assembly, Trigger Bar, OOW50BMG as per Drawing No. 7313106 of M2HB Gun	C	Nonestab
9) Pin Assembly Breech Lock of M2HB Gun[74]()	Specification : Pin Assembly, Breech Lock, OOW50BMG as per Drawing No. 6008784 of M2HB Gun	C	Nonestab
10) Screw Lock Breech Bearing OOW50BMG as per Drawing No 5013530 of M2HB Gun[74]()	Specification : Screw Lock, Breech Bearing, OOW50BMG as per Drawing No. 5013530 of M2HB Gun	C	Nonestab
11) Pin Belt Holding Pawl OOW50BMG as per Drawing No 7162872 of M2HB Gun[74]()	Specification : Pin, Belt Holding Pawl, OOW50BMG as per Drawing No. 7162872 of M2HB Gun	C	Nonestab
12) Bearing Breech OOW50BMG as per Drawing No 6008920 of M2HB Gun[74]()	Specification : Bearing, Breech, OOW50BMG as per Drawing No. 6008920 of M2HB Gun	C	Nonestab
13) Assembly Carrying Handle OOW50BMG as per drawing no 10208111 of M2HB GUN[74]()	Specification : Assembly Carrying Handle, OOW50BMG as per drawing no.: 10208111 of M2HB GUN	C	Nonestab
14) Pawl Assembly Belt Holding[74]()	Specification : Pawl Assembly, Belt Holding, OOW50BMG as per Drawing No.: 7313083 of M2HB GUN	C	Nonestab
15) Rear Sight Assembly OOW50BMG as per Drawing No 12003047 of M2HB GUN[74]()	Specification : Rear Sight Assembly, OOW50BMG as per Drawing No.: 12003047 of M2HB GUN	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) GUARD TRIGGER INVESTMENT CASTING TO DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG.NO.RFI.SK-4312*12 required for 0.315" Sporting Rifle	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) IC TO DRG.NO.:TEND.920 D FOR TRIGGER.[70]()	Specification : AS PER DRG No.TEND 920D ICR -1238	C	Nonestab
2) IC TO DRG NO TEND 1100 D FOR RAMP BACKSIGHT ICR 1253[70]()	Specification : AS PER DRG NO.:TEND 1100 D FOR RAMP BACKSIGHT(ICR-1253)	C	Nonestab
3) IC TO DRG NO TEND 658 G FOR LEVER CHANGE ICR 1312 WTIH FIRMS MATERIAL[70]()	Specification : AS PER DRG.NO.:TEND.658 G FOR LEVER CHANGE. (ICR-1312)(WTIH FIRM'S MATERIAL)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()	Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) IC TO DRG NO TEND 255E FOR LOCATING PIECE ICR1505[70]()	Specification : AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)	C	Nonestab
2) IC FRONT SIGHT BLOCK AS PER DRG NO IC K 1207[70]()	Specification : IC FRONT SIGHT BLOCK AS PER DRG NO. IC K 1207 FOR 7.62 MM TAR	R	Nonestab
3) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()	Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672	C	Nonestab
4) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()	Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670	C	Nonestab
5) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()	Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INVESTMENT CASTING TO DRG NO TEND 1805STAR2 FOR SLIDE COCKING HANDLE ICR 1290[70]()	Specification : AS PER INVESTMENT CASTING TO DRG. NO. TEND 1805*2 FOR SLIDE COCKING HANDLE (ICR-1290).	C	Nonestab
2) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013[70]()	Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN. A 1013 "	C	Nonestab
3) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]()	Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0154 THROUGH INVESTMENT CASTING ROUTE IN FC[70]()	Specification : AS PER DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()	Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BLOCK BREECH ICR 1261 DS CAT NO 1005 001570 DC NO 25103 SA DT 23 08 2001 FULLY FINISHED CONDITION WITH FIRM MATERIAL[70]()	Specification : AS PER (ICR - 1261) DS CAT NO.1005-001570 DC NO.25103-SA DT.23.08.2001 (ASFULLY FINISHED CONDITION WITH FIRM MATERIAL)	C	Nonestab
2) IC TO DRG NO TEND 255E FOR LOCATING PIECE ICR1505[70]()	Specification : AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)	C	Nonestab
3) IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4[70]()	Specification : IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4	C	Nonestab
4) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()	Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL	C	Nonestab
5) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()	Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INPUT BLANKS OF BLOCK GAS TO TEND 1966STAR WITH FIRMS MATERIAL FOR RIFLE 7POINT62 1A1 ICR 1322[70]()	Specification : AS PER TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)	C	Nonestab
2) IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4[70]()	Specification : IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 STAR 4	C	Nonestab
3) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()	Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL	C	Nonestab
4) IC FRONT SIGHT BLOCK AS PER DRG NO IC K 1207[70]()	Specification : IC FRONT SIGHT BLOCK AS PER DRG NO. IC K 1207 FOR 7.62 MM TAR	R	Nonestab
5) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()	Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()	Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE	C	Nonestab
2) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()	Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()	Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION	C	Nonestab
2) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()	Specification : As per TE	C	Nonestab
3) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()	Specification : As per TE	C	Nonestab
4) CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()	Specification : As per TE	C	Nonestab
5) CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()	Specification : As per TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()	Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()	Specification : As per TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()	Specification : As per TE	C	Nonestab
2) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()	Specification : As per TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SEAR TO DRG No 2A42 05 029 C5029 WITH FIRMS MATERIAL DSCAT NO 1005 560073 ITEM TO BE MANUFACTURED THROUGH FORGING ROUTE REFER FORGING TO DRG NO 64C 5029 200 C3 LATEST DC TO BE FOLLOWED LATESE DC NO19118 DT 18 03 2008[70]()	Specification : As per TE	C	Nonestab
2) ROCKER TO DRG NO C5025 IN FULLY FINISHED WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5025 200 E3 REQD FOR 30MM CANNON[70]()	Specification : As per TE	C	Nonestab
3) CONNECTING LINK RIGID IN FULLY FINISHED TO DRG NO C5056 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH FORGING ROUTE DRG NO 64C 5056 200 F3 REQD FOR 30MM CANNON[70]()	Specification : As per TE	C	Nonestab
4) C1005 STRIP FULLY FINISHED THROUGH FORGING ROUTE DRG NO 64C 1005 200 F3 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()	Specification : As per TE	C	Nonestab
5) C2003 SHIELD FULLY FINISHED THROUGH FORGING ROUTE TEND 2096 WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()	Specification : As per TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()	Specification : As per TE	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()	Specification : As per TE	C	Nonestab
2) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()	Specification : As per TE	C	Nonestab
3) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()	Specification : As per TE	C	Nonestab

Category :
Grade : Grade III
Size : S

1164

ENGINEERING AIDS
S.No.199/5b, No.14, Vayalanallur Village, Balaji Chamber Street Chennai Tamil Nadu
PIN1 : 600072
Phone No. : 26381945
GSTIN : 33AAAFE0237F1Z6

AAAFE0237F

Download

1) Engine Factory Avadi

[Deemed Registration]

Name	Specification	Use	Status
1) Camshaft thrust bearing Assy (SB 306-0303)()	Specification : sb 306-03-3	C	Estab
2) RH Branch Pipe (SB 3321-14-1)()	Specification :(SB 3321-14-1)	C	Estab

Category : ddp
Grade : 3
Size : S

1) Engine Factory Avadi

Name	Specification	Use	Status
1) Valve Guide()	306-17-12	E	Estab.
2) Assy Manifold Intake()	SB 419-00-4	E	Established
3) Intake Manifold()	SB 20-19-00-1	E	Established
4) Valve Seat()	306-22-1	E	Established
5) Valve Seat()	306-23-1	E	Established
6) Valve Guide()	306-17-2	E	Established
7) Valve Guide()	20-06-17-1	E	Established
8) Nut()	301-21-1	E	Established
9) Shell Bearing()	20-06-39	E	Established
10) Piston pin()	304-11-10	E	Established
11) Coupling unit for V92S2()	900046	E	Established
12) Coupling unit for V92S2()	400203	E	Established
13) Clip assy()	SB 20-09-16	E	Established
14) T-Piece()	3319-161-6	E	Established
15) Holder()	303-43-1	E	Established
16) Holder()	303-43	E	Established
17) Holder()	SK-1236	E	Established
18) Suction pipe()	Sb 402-02-1	E	Established
19) Access hole cover()	306-60-1	E	Established
20) Elbow()	306-130-1	E	Established
21) Lever()	SB 3334-01-6	E	Established
22) Lever()	SB 3334-185	E	Established
23) Angle Piece()	306-98-7	E	Established
24) Assy Pipe()	Sb 20-20-04-3	E	Established
25) Axle Assy()	SB 3338-414	E	Established
26) Ball 2-40 Gost 3722-81 U()	317-52	E	Established
27) Band()	XP 250 P	E	Established
28) Bolt M8x30()	356-73	E	Established
29) Bracket()	3336-162	E	Established
30) Bolt M8x20()	356-138	E	Established
31) Bolt M10x20()	20-56-10	E	Established
32) Breather Packing()	20-01-33-2	E	Established
33) Bush for Con.rod big end()	340-20-5	E	Established
34) Bushing()	360-26-014-02	E	Established
35) Camshaft Bearing assy()	SB 306-04-2	E	Established
36) Camshaft Thrust Bearing assy()	SB 306-03-3	E	Established
37) Camshaft Thrust Bearing assy()	SB 20-06-03-1	E	Established
38) Cleat()	335-15-1	E	Established
39) Cone set for Coupling unit(V-46)()	ND	E	Established
40) Filter fastening Belt assy()	SB 301-166-5	E	Established
41) Oil pipe to Pump()	SB 20-20-05-4	E	Established
42) Holder()	303-42	E	Established
43) Idle Gear Axle()	3338-440	E	Established
44) Lever()	SB 315-662-3	E	Established
45) Mobile Tool Trolley()	ND	E	Established
46) Nut()	20-11-82-1	E	Established
47) Nut()	92-1106-181	E	Established
48) Nut M8()	351-02	E	Established
49) Nut M10()	351-50	E	Established
50) Nut M6()	351-06	E	Established
51) Oil pipe to Camshaft LH()	SB 320-33-A	E	Established
52) Oil pipe to Camshaft RH()	SB 320-32-A	E	Established
53) Plate()	3335-205	E	Established
54) Plug()	303-13-4	E	Established
55) Rotor Blade()	92-1106-202	E	Established
56) Shaft with Impeller()	SB 411-22-16	E	Established
57) Spanner for Injector nut()	SB 330-27-5	E	Established
58) Spanner for Injector nut ()	SK 1252	E	Established
59) Spring washer()	353-28	E	Established
60) Sub Assy Pipe Flange()	SB 402-104-2	E	Established
61) Supporting ring Thrust Journal()	3338-150	E	Established
62) Swivel Nipple()	92-1106-231	E	Established
63) Tappet()	SB 327-15-5	E	Established
64) Tappet()	Sb 20-27-15-2	E	Established
65) Tightening Stud()	301-84-2A	E	Established
66) Water pipe LH()	SB 3321-121-3	E	Established
67) Plug()	306-25	E	Established

Category : DP
Grade : III
Size : S

1) Engine Factory Avadi

Name	Specification	Use	Status
1) CONNECTING BRANCH PIPE[62]()	Specification : CONNECTING BRANCH PIPE	C	Estab

Category : DP
Grade : III
Size :

1) Engine Factory Avadi

Name	Specification	Use	Status
1) Assy Piston pin with end cap[]()	Specification :	C	Estab
2) CONNECTING BRANCH PIPE[62]()	Specification : CONNECTING BRANCH PIPE	C	Estab
3) ASSY PISTON PIN WITH END CAP.[62]()	Specification : 304-10-5 & 304-11-10	C	Estab

Category : DP
Grade : III
Size :

1165

EURODEC PAINTS
GILL ROAD LUDHIANA GILL ROAD LUDHIANA Punjab
PIN1 : 141003
Phone No. : 2538261
GSTIN : 03AAAFH6850R1Z2

AAAFH6850R

Download

1) Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) PAINTS READY MIXED AIR DRYING SPRAYING, MATT FINISH OLIVE GREEN[10]()	Specification : PAINT R/M,A/D,SPRAYING,MATT FINISH,OLIVE GREEN ISC-220 OF IS-5-1994 (FOURTH REVISION) AMENDMENT NO.1 TO SPECIFICATION IS-168-1993 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE. ADDITION CLAUSE IN THE SPECIFICATION:A)DRYING TIME 1.SURFACE	E	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) 9911846690 PAINT DEEP BRONZE GREEN NO224[99]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
2) 9911839718 PAINT SYN ENAMEL STOV PO RED[99]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
3) 9911841939 BLACK BOARD PAINT[99]()	Specification : 9911841939 BLACK BOARD PAINT	C	Nonestab
4) 1011300099 PAINT RFU ALUMINIUM[99]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
5) 9911844697 PAINT WHITE TO SPECN IS168[99]()	Specification : 9911844697 PAINT WHITE TO SPECN.IS:168-19,	P	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) 9911846692 PAINT PRE TREATMENT PRIMER[99]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
2) 9911839804 PAINT STOV ENAMEL GOLDEN YELLOW[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) 9911839150 PAINT RMAD MATT LIGHT BROWN[45]()	Specification : PAINT RMAD MATT LIGHT BROWN	R	Nonestab
2) 1011517225 PAINT RM AD LIGHT BRS GREEN[99]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
3) 9911843678 PAINT RMAD OLIVE GREEN[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab
4) 9911833911 PAINT RM SIGNAL RED ISC537[99]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
5) 1011707446 PAINT RFU AD RO ZC[10]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) 1011718446 PAINT RMP R O Z C A D JSS 8010[10]()	Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION	R	Nonestab
2) 9911833896 PAINT RFU OLIVE GREEN ISC 294[99]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
3) 9911846684 POLYURATHENE PU PAINT[99]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab
4) 1011818314 PAINT PRIMER FOR PINAKA POD[10]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab
5) 1012700355 PAINT ENAMAL GOLDEN YELLOW[10]()	Specification : AS PER OFBH SPECIFICATION	P	Nonestab
6) 1011300002 PAINT RFU APCOLIT WHITE[10]()	Specification : AS PER OFBH SPECIFICATION	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) 1011718446 PAINT RMP R O Z C A D JSS 8010[10]()	Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION	R	Nonestab
2) 9911844695 PAINT R M A D LIGHT BRS GREEN[45]()	Specification : PAINT R/M A/D LIGHT BRS. GREEN	R	Nonestab

Category :
Grade : Grade III
Size : S

1166

A D ELECTROSTEEL CO PVT LTD
BALTIKURI, SURKIMILL, KALITALA, HOWRAH, Howrah, West Bengal, 711113 HOWRAH HOWRAH West Bengal
PIN1 : 711113
Phone No. : 22312428
GSTIN : 19AACCA1827A1Z8

AACCA1827A

Download

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) SPIGOT STEERING KNUCKLE[90]()	Specification : SPIGOT STEERING KNUCKLE PT. NO. X-1804011-D REF DRG NO. X1804011D SHEET 2 OF 2 FOR FORGING DRG.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) FORG FOR REVERSE IDLER GEAR BS 3[90]()	Specification : FORG FOR REVERSE IDLER GEAR , STLN- BS-III, PT. NO. F8A02611-3	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) Shock Absorber drg no F 7469600 HA for Stallion vehicle[90]()	Specification : As per specification/ Drg.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) LPTA Rear Axle Shaft RH Finish[90]()	Specification : Rear Axle Shaft RH (Finish) Part No 2614 3570 7901 V1	C	Nonestab
2) LPTA Rear Axle Shaft LH Finish[90]()	Specification : Rear Axle Shaft LH (Finish) Part No 2614 3570 7901 V1 (OLD)	C	Nonestab
3) LPTA Forging for Drive Shaft Rear Axle[90]()	Specification : Forging for Drive Shaft 2574 2830 7901 3 (R2)	C	Nonestab
4) LPTA Forging for Follower[90]()	Specification : Forging for Follower 00322 337 0417 50	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) FORG FOR NEEDLE HOUSING[90]()	Specification : FORGING FOR NEEDLE HOUSING, DRG. No. D 9045315-3(R1)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) Casting for blank upper Race Ring -645-01-7311-2/B[90]()	Specification : As per specification / Drawings	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) Casting for blank lower Race Ring -645-01-7313-1C/B[90]()	Specification : As per specification / Drawings	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) CASTING FOR COMMANDER RING[90]()	Specification : CASTING FOR COMMANDER RING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) LPTA Assy Tie Rod[90]()	Specification : Assy Tie Rod Part No X 261433800103	C	Nonestab
2) LPTA Forging for Rev Idler Gear[90]()	Specification : Forging for Reverse Idler Gear LPTA 715 BS-III Part No 2691 2635 5407 3 (R1)	C	Nonestab
3) LPTA Forging for Drive Shaft Front Axle[90]()	Specification : Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1	C	Nonestab
4) LPTA Forging for Gear Front[90]()	Specification : Forging for Gear Front Drg No 312 282 2211 50 R1	C	Nonestab
5) LPTA Forging for Drive Shaft[90]()	Specification : Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)	C	Nonestab
6) LPTA Forging for Steering Lever LH RH[90]()	Specification : Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50	C	Nonestab
7) LPTA Forging for Flange Axle Housing[90]()	Specification : Forging for Flange Axle Housing (Axle Housing) Drg No 2604 3510 5102 3 (R1)	C	Nonestab
8) LPTA Forging for Gear Rear[90]()	Specification : Forging for Gear Rear Drg No 322 2820 211 50 (R1)	C	Nonestab
9) LPTA Forging for King Pin Lower[90]()	Specification : Foring for King Pin Lower 340 332 1306 3 (R2)	C	Nonestab
10) LPTA Forging for King Pin Upper[90]()	Specification : Foring for King Pin Upper Part No 2574 3325 5102 3 R2	C	Nonestab
11) LPTA Forging for Follower[90]()	Specification : Forging for Follower 00322 337 0417 50	C	Nonestab
12) LPTA Forging for Coupling Flange RXL[90]()	Specification : Forging for Coupling Flange Part No 2730 3530 5001 3	C	Nonestab
13) LPTA Forging for Coupling Flange AGB[90]()	Specification : Forging for Coupling Flange DRG No 312 262 2045 3 (A)	C	Nonestab
14) LPTA Forging for Counter Shaft AGB[90]()	Specification : Forging for Counter Shaft Drg No 322 2830 102 50	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) LPTA Rear Axle Shaft RH Finish[90]()	Specification : Rear Axle Shaft RH (Finish) Part No 2614 3570 7901 V1	C	Nonestab
2) LPTA Rear Axle Shaft LH Finish[90]()	Specification : Rear Axle Shaft LH (Finish) Part No 2614 3570 7901 V1 (OLD)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) SPRING CUP RH DRAG LINK ASSY[90]()	Specification : SPRING CUP RH DRAG LINK ASSY	R	Nonestab
2) SPRING CUP LH DRAG LINK ASSY[90]()	Specification : SPRING CUP LH DRAG LINK ASSY	C	Nonestab
3) HOSE ASSY[90]()	Specification : HOSE ASSY	C	Nonestab
4) SPRING LOAD BODY FRT[90]()	Specification : SPRING LOAD BODY FRT.	C	Nonestab
5) Shock Absorber[90]()	Specification : As per specification / drg.	C	Nonestab
6) Propeller Shaft X7412700[90]()	Specification : PROPELLER SHAFT ASSY A2196700 PROPELLER SHAFT ASSY A2196700, ONE SET CONSISTING OF:- 1. DRIVE SHAFT TO PART NO. X7412700 V1 01NO.& 2. PROPELLER SHAFT TO PART NO. X7412800- (V1)02N0FOR MK-IV, BS-III VEHICLE.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878[90]()	Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878	C	Nonestab
2) MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856[90]()	Specification : MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856	C	Nonestab
3) MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858[90]()	Specification : MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858	C	Nonestab
4) MACHINED CASTING AS PER GCF DRG NO GCF 50 40891[90]()	Specification : MACHINED CASTING AS PER GCF DRG NO GCF 50 40891	C	Nonestab
5) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40890[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40890	C	Nonestab
6) PLATE AS PER DRAWING NO 5175363[90]()	Specification : PLATE AS PER DRAWING NO 5175363	C	Nonestab
7) PLATE AS PER DRAWING NO 5175364[90]()	Specification : PLATE AS PER DRAWING NO 5175364	C	Nonestab
8) PLATE AS PER DRAWING NO 5183023[90]()	Specification : PLATE AS PER DRAWING NO 5183023	C	Nonestab
9) PLATE AS PER DRAWING NO 4077475[90]()	Specification : PLATE AS PER DRAWING NO.4077475	C	Nonestab
10) PLATE AS PER DRAWING NO 5167374[90]()	Specification : PLATE AS PER DRAWING NO 5167374	C	Nonestab
11) PLATE AS PER DRAWING NO 5175362[90]()	Specification : PLATE AS PER DRAWING NO.5175362	C	Nonestab
12) BASE PLATE AS PER DRG NO 3052701[90]()	Specification : BASE PLATE AS PER DRG NO 3052701	C	Nonestab
13) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40862	C	Nonestab
14) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863	C	Nonestab
15) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864	C	Nonestab
16) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892	C	Nonestab

Category :
Grade : Grade III
Size : S

1167

AKANKSHA HI-TECH ENGINEERS
166 Lalbaba Haveli Bhuleshwar Road MUMBAI Maharashtra
PIN1 : 400002
Phone No. : 22424611
GSTIN : 27AFZPM3199J1ZF

27AFZPM319

Download

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 0133030123 ERA MOUNTING PLATE ASSY STD[01]()	Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES	C	Nonestab
2) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP[01]()	Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES	C	Estab

Category : s
Grade : Grade III
Size : S

1168

POLYFIT FABRICATORS PVT. LTD.
NO. 3B (NP) SIDCO INDUSTRIAL ESTATE, AMBATTUR, CHENNAI TAMIL NADU
PIN1 : 600098
Phone No. : 044-26241273, 9551697151
GSTIN : 33AAACV2532R1Z4

CHEP12154C

Download

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) PIPE LINE ASSY. (02 TYPES)()	DRG NO. 1) 175.66.013CB-1, 2) 175.66.061CBCB	C	Not Estab.
2) Rubber Hoses()	HVF/BLT/GENERIC-G/B	C	Non Established
3) Rubber Hoses (19 Types)()	HVF/BLT/GENERIC-M	C	Non Established
4) Exhaust System()	188.35SP-4	C	Non Established
5) Pipelines & Assembly Units of Hydraulic Control System.()	188.66SP-3	C	Non Established
6) Air Supply System()	188.34 SP-1	C	Non Established
7) Hose, Pipe Line, Pipe Line()	CQA(HV) 5.66.037, CQA(HV) 5.66.046, CQA(HV)5.66.055	C	Non Established
8) Hose Connection, Hose Connection()	175.32.062 CB/CRIMP, 175.32.042 CB/CRIMP	C	Non Established
9) Hose()	172.70.066 CB	C	Non Established

Category : P
Grade : II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) ALL TYPES OF METALLIC PIPELINES[62]()	Specification : ALL TYPES OF METALLIC PIPELINES	E	Nonestab

Category : p
Grade : Grade I
Size :

1169

MMTC LIMITED
MMTC HOUSE, C-22, E-BLOCK, BANDRA KURLA COMPLEX, MUMBAI MAHARASHTRA
PIN1 : 400051
Phone No. : 011- 24362200
GSTIN : 27AAACM1433E1ZZ

MUMM24364E

Download

1) Ordnance Factory Ambernath

[Deemed Registration]

Name	Specification	Use	Status
1) ALUMINUM INGOTS.[AS PER REQUIREMENT / SPECIFICATION. ]()	AS PER REQUIREMENT / SPECIFICATION.	"R"	"Estab"
2) ANTIMONY INGOTS.[AS PER REQUIREMENT / SPECIFICATION. ]()	AS PER REQUIREMENT / SPECIFICATION.	"R"	"Estab"
3) COPPER CATHODE.[AS PER REQUIREMENT / SPECIFICATION. ]()	AS PER REQUIREMENT / SPECIFICATION.	"R"	"Estab"
4) TIN & LEAD INGOTS.[AS PER REQUIREMENT / SPECIFICATION. ]()	AS PER REQUIREMENT / SPECIFICATION.	"R"	"Estab"
5) ZINC / NICKLE INGOTS. [AS PER REQUIREMENT / SPECIFICATION. ]()	AS PER REQUIREMENT / SPECIFICATION.	"R"	"Estab"

Category : S
Grade : I
Size : L

1) Ammunition Factory Khadki

[ENR Registration]

Name	Specification	Use	Status
1) LEAD PIG GRADE Pb 99.94 SPECN -IS: 27 - 1992 (FOURTH REV). WITH A.NO.1()	Specification : IS: 27 - 1992 (FOURTH REV). WITH A.NO.1	R	Estab

Category : p
Grade : 3
Size : S

1) Ammunition Factory Khadki

[ENR Registration]

Name	Specification	Use	Status
1) ANTIMONY SPECN. IS 211-1992 4TH REVISION()	Specification : IS:211-1992 (FOURTH REVISION) GRADE- SB : 99.5	R	Estab

Category : p
Grade : 3
Size : S

1170

SLV Industries
131, C.T.H Road, Near Lions CLub, Avadi. CHENNAI TAMIL NADU
PIN1 : 600054
Phone No. : 7806809696
GSTIN : 33ARZPR8051J1ZZ

ARZPR8051J

Download

1) Engine Factory Avadi

Name	Specification	Use	Status
1) Breather system Mounting without scavenge pump()	SB 3342-00-21A	E	Not Estab
2) Steel Packing Case()	SK/0706-0709	E	Established
3) Ventilation System of Crankcase()	SB 3342-00-8A	E	Established
4) Air Starting system Pipeline()	SB 20-22-00-7A	E	Established
5) Air heating unit assy()	SB 345-00-1	E	Established
6) Assy Manifold Intake()	SB 419-00-4	E	Established
7) Exhaust Manifold()	SB 418-50-45	E	Established
8) Inst. of device of press & Air dist()	SB 310-00-7	C	Established
9) Air heating unit assy()	SB 345-00-1	E	Established
10) Assy Manifold Intake()	SB 419-00-4	E	Established
11) Exhaust Manifold()	SB 418-50-45	E	Established
12) Inst. of device of press & Air dist()	SB 310-00-7	C	Established

Category : P
Grade : III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) CHAIN()	DRG.NO.GOST:13568(PR.12.7)	C	Not Estab.

Category : P
Grade : III
Size : S

1171

Himatsingka Exports Private Ltd
9th, I Floor, Local Shopping Centre, Udai Park, New Delhi New Delhi
PIN1 : 110049
Phone No. : 011-26961954/41640712/09810129152
GSTIN : 09AABCH1307B2Z9

DELH06687C

Download

1) Ordnance Clothing Factory Avadi

Name	Specification	Use	Status
1) Fabrication of Shirt PW DD Khaki H/S()	As per Specification	E	Not Estab.
2) Fabrication of Shirt PW DD Khaki F/S()	As per Specification	E	Not Estab.
3) Fabrication of Trousers PW DD Khaki()	As per Specification	E	Not Estab.
4) Fabrication of Shirt Disposable()	As per Specification	E	Not Estab.
5) Fabrication of Shorts Disposable()	As per Specification	E	Not Estab.
6) Fabrication of Trousers sleeping()	As per Specification	E	Not Estab.
7) Fabrication of Jacket sleeping()	As per Specification	E	Not Estab.
8) Fabrication of Overall Mazri()	As per Specification	E	Not Estab.
9) Fabrication of Trouser Serge Polywool 1973 Pattern (modified)()	As per Specification	E	Not Estab.
10) Fabrication of Shorts Cotton Light OG()	As per Specification	E	Not Estab.
11) Fabrication of Shirt Plain Weave PV light Blue F/S()	As per Specification	E	Not Estab.
12) Fabrication of Shorts PV DD Khaki()	As per Specification	E	Not Estab.
13) Fabrication of Trousers PW PV DD OG()	As per Specification	E	Not Estab.
14) Fabrication of Trousers PW PC Khaki()	As per Specification	E	Not Estab.
15) Fabrication of Shirt PV Light Grey H/S()	As per Specification	E	Not Estab.
16) Fabrication of Cap DB White()	As per Specification	E	Not Estab.
17) Fabrication of Coat DB White()	As per Specification	E	Not Estab.
18) Fabrication of Trousers DB White()	As per Specification	E	Not Estab.
19) Fabrication of Trouser PV Blue Grey()	As per Specification	E	Not Estab.
20) Fabrication of Coat Combat Disruptive Detachable Lining()	As per Specification	E	Not Estab.
21) Fabrication of Overall Combination Black()	As per Specification	E	Not Estab.
22) Fabrication of Coat ECC()	As per Specification	E	Not Estab.
23) Fabrication of Overall Comb. Disruptive ()	As per Specification	E	Not Estab.
24) Fabrication of Shirt PV Light blue H/S()	As per Specification	E	Not Estab.
25) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo()	As per Specification	E	Not Estab.
26) Fabrication of Trouser Combat PC Disruptive Pattern with Indian Army Logo()	As per Specification	E	Not Estab.
27) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo (modified)()	As per Specification	E	Not Estab.
28) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo (modified)()	As per Specification	E	Not Estab.
29) Fabrication of Shirt Mans Angola Drab Poly Wool Modified Pattern 2012()	As per Specification & Requirement	E	Non Established
30) Fabrication of Shorts PW PC White (modified)()	As per Specification & Requirement	E	Non Established
31) Fabrication of Overall Drill MP()	As per Specification & Requirement	E	Non Established
32) Fabrication of Overall Combination Greenish Khaki()	As per Specification & Requirement	E	Non Established
33) Fabrication of Shorts Gymnastic Blue()	As per Specification & Requirement	E	Non Established

Category : P
Grade : II
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Trouser ECC()	FABRICATION OF COMPLETE TROUSERS ECC CONFIRMING TO PROV.SPECIFICATION NO.S/3558/A/TC-15/TROUSERS ECC(TWC & TSP) (a)AND APPROVED SAMPLE.AS PER RELEVANT CLAUSE OF SPECIFICATION	E	Not Estab.
2) Fabrication of Overall Winter Complete()	TC/CLO/235(f) & Certified sample schedule No.CQA(T&C)/TC-15/8(d)	E	Not Estab.
3) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012()	IND/TC/4552 (1) & Approved Sample	E	Not Estab.
4) Fabrication of Jacket Combat PC Dis. with Indian Army Logo()	OCFAv/Garment/001(a) & Approved Sample /OCFAv/Garment/001 (b) & Approved Sample	E	Not Estab.
5) Fabrication of Trousers Combat PC Dis. With Indian Army Logo()	OCFAv/Garment/002 (a) & Approved Sample/ OCFAv/Garment/002 (b) & Approved Sample	E	Not Estab.
6) FABRICATION OF COAT ECC (IMP.VER.)()	FABRICATION OF COAT ECC(IMP.VER.)AS PER SPECIFICATION NO.IND/TC/4587(C) AND APPROVED SAMPLE.As per relevant clause of specification	E	Not Estab.

Category : DDP
Grade : II
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Trouser ECC()	FABRICATION OF COMPLETE TROUSERS ECC CONFIRMING TO PROV.SPECIFICATION NO.S/3558/A/TC-15/TROUSERS ECC(TWC & TSP) (a)AND APPROVED SAMPLE.AS PER RELEVANT CLAUSE OF SPECIFICATION	E	Not Estab.
2) Fabrication of Overall Winter Complete()	TC/CLO/235(f) & Certified sample schedule No.CQA(T&C)/TC-15/8(d)	E	Not Estab.

Category : DDP
Grade : II
Size : S

1172

Nahar Industrial Enterprises Limited
Phase-IV, Focal Point, Ludhiana, Punjab
PIN1 : 141010
Phone No. : 0161-2672590/2672591
GSTIN : 03AACCN3563A2Z2

JLDN00758C

Download

1) Ordnance Clothing Factory Avadi

Name	Specification	Use	Status
1) Fabrication of Shirt PW DD Khaki H/S ()	As per Specification	E	Not Estab.
2) Fabrication of Shirt PW DD Khaki F/S()	As per Specification	E	Not Estab.
3) Fabrication of Trousers PW DD Khaki()	As per Specification	E	Not Estab.
4) Fabrication of Shirt Disposable()	As per Specification	E	Not Estab.
5) Fabrication of Shorts Disposable()	As per Specification	E	Not Estab.
6) Fabrication of Trousers sleeping()	As per Specification	E	Not Estab.
7) Fabrication of Jacket sleeping()	As per Specification	E	Not Estab.
8) Fabrication of Overall Mazri()	As per Specification	E	Not Estab.
9) Fabrication of Trouser Serge Polywool 1973 Pattern (modified)()	As per Specification	E	Not Estab.
10) Fabrication of Shorts Cotton Light OG()	As per Specification	E	Not Estab.
11) Fabrication of Shirt Plain Weave PV light Blue F/S()	As per Specification	E	Not Estab.
12) Fabrication of Shorts PV DD Khaki()	As per Specification	E	Not Estab.
13) Fabrication of Trousers PW PV DD OG()	As per Specification	E	Not Estab.
14) Fabrication of Trousers PW PC Khaki()	As per Specification	E	Not Estab.
15) Fabrication of Shirt PV Light Grey H/S()	As per Specification	E	Not Estab.
16) Fabrication of Cap DB White()	As per Specification	E	Not Estab.
17) Fabrication of Coat DB White()	As per Specification	E	Not Estab.
18) Fabrication of Trousers DB White()	As per Specification	E	Not Estab.
19) Fabrication of Trouser PV Blue Grey()	As per Specification	E	Not Estab.
20) Fabrication of Coat Combat Disruptive Detachable Lining()	As per Specification	E	Not Estab.
21) Fabrication of Overall Combination Black()	As per Specification	E	Not Estab.
22) Fabrication of Coat ECC()	As per Specification	E	Not Estab.
23) Fabrication of Overall Comb. Disruptive ()	As per Specification	E	Not Estab.
24) Fabrication of Shirt PV Light blue H/S()	As per Specification	E	Not Estab.
25) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo()	As per Specification	E	Not Estab.
26) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo()	As per Specification	E	Not Estab.
27) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo (modified).()	As per Specification	E	Not Estab.
28) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo (modified).()	As per Specification	E	Not Estab.
29) Fabrication of Shirt Mans Angola Drab Poly Wool Modified Pattern 2012()	As per Specification & Requirement	E	Non Established
30) Fabrication of Shorts PW PC White (modified)()	As per Specification & Requirement	E	Non Established
31) Fabrication of Overall Drill MP()	As per Specification & Requirement	E	Non Established
32) Fabrication of Overall Combination Greenish Khaki()	As per Specification & Requirement	E	Non Established
33) Fabrication of Shorts Gymnastic Blue()	As per Specification & Requirement	E	Non Established

Category : P
Grade : I
Size : L

1) Ordnance Clothing Factory Avadi

Name	Specification	Use	Status
1) CLOTH POLYESTER AND COTTON DISRUPTIVE PATTERN 220 GSM FOR JUNGLE WITH ARMY LOGO 152 CMS MINIMUM EXCLUDING SELVEDGES[21]()	Specification : Specification No:PROV/OCFAV/FABRIC/005	R	Nonestab

Category : P
Grade : I
Size :

1) Ordnance Clothing Factory Avadi

Name	Specification	Use	Status
1) Cloth PC Disruptive Pattern (250 GSM) with Army Logo 152cm()	PROV/OCFAV/FABRIC/001(a)	R	Estab.
2) Cloth Drill Cotton Dark Grey 142cm()	IS:177	R	Not Estab.
3) Cloth Polyester & Cotton (20:80) Greenish Khaki (250gsm) 152cm()	PROV/OCFAV/FABRIC/001(a) without Disruptive Pattern	R	Not Estab.
4) Cloth Drill Cotton Greenish Khaki 142cm()	IS:177	R	Not Estab.
5) Cloth Drill Cotton White Bleached 142cm()	IS:177	R	Not Estab.
6) Cloth Cotton Light Blue 142cm()	IS: 2970	R	Not Estab.
7) Cloth Plain Weave PC Deep Brown 150cm()	AIRHQ/JDQAS/PROV/MG-082 (Rev-2014)	R	Not Estab.
8) Cloth Mercerised Cotton Light OG 142 cms minimum width (excluding selvedges)()	PROV/OCFAV/FABRIC/004	R	Non Established

Category : DP
Grade : I
Size : L

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabric Twill Weave Cotton & Polyester (80:20) Disruptive Pattern Water Repellent 250 GSM 150 cm Widt()	As per Requirements & Specifications	R	Not Estab.
2) Fabric Twill Weave Polyester & Cotton (20:80) 250 GSM Greenish Khaki 150 cm Width (Minimum)()	As per Requirements & Specifications	R	Not Estab.

Category : DP
Grade : II
Size : L

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Cloth Polyester & Cotton (20:80) Disruptive Pattern 250 GSM with Indian Air Force Logo 150 cm width (min)[21]()	SPECIFICATION NO. IAFS 01068:2015 AS PER RELEVANT CLAUSE OF SPECIFICATION	R	Nonestab

Category : DP
Grade : II
Size :

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabric Twill Weave Poly. & Cotton (67:33) Disruptive Patt. WR 290gsm 150 cm Width (Min)with Indian A[21]()	Specification : As per Requirements & Specifications	R	Estab

Category : DP
Grade : II
Size :

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabric twill weave Poly &Cotton (67:33) disruptive Pattern WR 290 gsm 150cm width []()	Specification :As per Requirements & Specifications	R	Estab

Category : DP
Grade : II
Size :

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabric twill weave Poly & Cotton (67:33) Dis. WR 290 GSM 150cm (Min) Width with Indian Army Logo[21]()	Specification : No. PROV/S/2599/TC-11/2009/01, Except That Clause No. 6.1 & 6.2 Which shall be suitable yarn count may be used in warp & weft in 3/1 twill weave to meet the functional & other constructional parameter along with feel & Finish & Clause no.	R	Estab

Category : DP
Grade : II
Size :

1173

B G ENTERPRISES
SR. NO 139, ASHOK NAGAR NEAR TOYOTA SHOWROOM, TATHAWADE PUNE Maharashtra
PIN1 : 411033
Phone No. : 9075095039
GSTIN : 27AFGPN8763G1Z0

PNEK15769F

Download

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) BULLET RUBBER FOR CARTG 38 MM[6086500060]()	Specification : DGOF 135	C	Nonestab
2) RUBBER SLUGS 18MM D X 35MM H[6099990172]()	Specification : DRG NO AFK/SK-2675 SHEET NO.1	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) BULLET RUBBER FOR CARTG 38 MM[60]()	Specification : DGOF 135	C	Nonestab
2) RUBBER SLUGS 18MM D X 35MM H[60]()	Specification : DRG NO AFK/SK-2675 SHEET NO.1	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) RUBBER WASHER FOR SHELL 105MM ILLG.[62]()	Specification : DRG. NO. ARDE 9769 DET NO.18 PART NO. ISX 432 DC-36335-A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) O RING 69.5 DIA FOR 84 MM ILLG.[62]()	Specification : DRG.NO.F-1301-054930 C	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) RUBBER WASHER FOR 51MM ILLG.[62]()	Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) WASHER (ACROLUNITRILE BUTADINE RUBBER COMPOUND Grade E ) FOR SHELL 155MM ILLG Naschem M1A1[63]()	Specification : DRG. NO. 155-1120	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) O RING 2MM FOR MORTAR BOMB 51MM ILLG[62]()	Specification : CQA(A) 2328(C)[DRG.NO. ARDE 2064, Det No. 6, Part No ITV 224]	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) O RING 61 X 2 MM FOR SHELL 84MM ILLG[62]()	Specification : DRG. NO. F-1301-055320C	C	Nonestab
2) O RING 1MM FOR 51MM ILLG. [62]()	Specification : DRG NO. ARDE 2064 (DET NO.4) PT.NO.ITV 223 SPECN. CQA(A) 2328 (d)	C	Nonestab
3) O RING 69.5 DIA FOR 84 MM ILLG.[62]()	Specification : DRG.NO.F-1301-054930 C	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) O RING FOR MORTAR BOMB 81MM ILLG 2A[62]()	Specification : CQA(A) 2345 (C) [DRG. NO. ARDE 2222, DET 6, PART NO ITV 263]	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) O RING 69.5 x 3 MM DIA FOR SHELL 84MM ILLG[62]()	Specification : DRG. NO. F-1301-054930 C	C	Nonestab
2) O RING 61X2 FOR SHELL 84MM ILLG.[62]()	Specification : DRG. NO. F-1301-055320C	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) O RING 1MM FOR 51MM ILLG. [62]()	Specification : DRG NO. ARDE 2064 (DET NO.4) PT.NO.ITV 223 SPECN. CQA(A) 2328 (d)	C	Nonestab
2) O RING 2MM FOR 51MM ILLG.[62]()	Specification : DRG NO ARDE 2064 (DET 6) PT NO ITV 224 SPECN. CQA(A) 2328 (d)	C	Nonestab

Category :
Grade : Grade III
Size : S

1174

SWASTIK ENGINEERING
SR 40/14, GAWADE BUILDING, WARJE MALWADI NDA ROAD PUNE Maharashtra
PIN1 : 411058
Phone No. : 9763768940
GSTIN : 27BEQPG1926J1Z8

BEQPG1926J

Download

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]()	Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) THERMAL TRANSFER RIBBON NONETEARABLE[25]()	Specification : L2/SPECN/RIBBON TO PRINT BLANK WHITE NON TEARABLE LABEL/04 DT. 13.07.17	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) PYRO CARTRIDGE YDP 1 2 ASSY EMPTY[60]()	Specification : DRG. NO. NASK 1015 (PROV) DT. 04.12.2009	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) SQUIB HOLDER DRG NO NAI P SK 299[60]()	Specification : SQUIB HOLDER DRG NO NAI (P) SK 299/26 DT. 06.02.2018	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) SIMULATED SQUIB PLUG BRIDGED[61]()	Specification : SQUIB PLUG (BRIDGED) ERDL DRG. NO. 1296 DET.1 DT. 10-5-93	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()	Specification : CQA (A) 2316	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) BOX W 123 MK2 DESIGNER'S REF IA 882[65]()	Specification : IA 948 (a,k) DC 36868-A.	C	Nonestab
2) PYRO CARTRIDGE YDP 1 2 ASSY EMPTY[60]()	Specification : DRG. NO. NASK 1015 (PROV) DT. 04.12.2009	R	Nonestab
3) LUG DRG NO NAI P SK 400[60]()	Specification : DRG.NO. NAI (P) -SK 400/10/3 DT. 05.10.2018	R	Nonestab
4) INNER FITMENT BOX C 128 OF YDB 60[21]()	Specification : DRG. NO. AFK/SK-886-19 DT. 21/01/2019	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) STRIKER FOR PYRO(INDIA) BUOYANT SMOKE ORGANGE[62]()	Specification : DGOF/OFDR/008 [DRG NO.OFDR/CT/15/M-1/A3]	C	Nonestab
2) STRIKER HOLDER FOR PYRO(INDIA) BUOYANT SMOKE ORGANGE[62]()	Specification : DGOF/OFDR/008 [DRG NO.OFDR/CT/13/M-1/A3]	C	Nonestab
3) RUBBER RING FOR 84 MM ILLG.[62]()	Specification : RUBBER RING TO DRG.NO.F-1301-047940-D DC 34802 A NATURALRUBBER TO SPECN.IND/ME/728 COMPUND Z-14-C.	C	Nonestab
4) SET OF COMPONENTS FOR SIGNAL DISTRESS D/N 1 MK IN[64]()	Specification : DRG. NOS. NAD-8611/38, 40, 37, 39, 27, 29, 2 AND 36 (TOTAL EIGHT)	C	Nonestab
5) COVER FOR 84 MM ILLG.[62]()	Specification : DRG.NO.F-1301-047932-B DT.10-11-1989 SPECN.F-1301-903340 .	C	Nonestab
6) CAP FOR CONTAINER BUOYANT SMOKE[62]()	Specification : DRG.NO.OFDR/CT/6/M1/A3, SPECN. NO.DGOF/OFDR/OO8.	C	Nonestab
7) PROFEL PACKING FITMENT FOR SHELL 84MM ILLG.[65]()	Specification : DRG. NO. OFDR/PACKING/84MM/74	C	Nonestab
8) DELAY TUBE FOR BUOYANT SMOKE (I.NAVY)[62]()	Specification : DRG NO.OFDR/CT/17/M1/A3 SPECN.NO.DGOF/OFDR/[008	C	Nonestab
9) CUP SECURING CARTG. FOR BUOYANT SMOKE[62]()	Specification : DRG NO.OFDR/CT/19/M1/A3	C	Nonestab
10) AL. RING FOR BUOYANT SMOKE[62]()	Specification : DRG NO.OFDR/CT/27/A-4/R-14 SPECN.NO.DGOF/OFDR /008	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) STEEL DISC FOR PYRO(INDIA) BUOYANT SMOKE ORGANGE[99]()	Specification : DGOF/OFDR/008 [DRG NO. OFDR/CT/24/A3]	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) AMMUNITION CONTAINER BOX B 9A BRUNSWICK GREEN FOR PACKING OF BOMB 51MM SMOKE[65]()	Specification : DRG.NO. ARDE-2174, SHEET NO.3,PT.NO.ISV 553A DC-35907A DT.09/02/1995	C	Nonestab
2) NOSE CAP FOR 51 MM SMOKE [62]()	Specification : DRG. NO. ARDE-2082 DET. NO. 7 PT. NO. ITV-215 DC(I)36288-A, SPECN.CQA(A) 2352(d) DC-36768-A DT 18-7-2001.	C	Nonestab
3) POLY PROPYLENE DISC FOR 51MM SMOKE[62]()	Specification : DRG. NO.CQA(A)/AMN/2868 PT.NO.ITV 252	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) BODY EMPTY FOR 51MM SMOKE[62]()	Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 DC-36973-A DT.09/08/04 & SPEN.NO.CQA(A) 2352 (d) DC-36768 A DATED.18/07/2001	C	Nonestab
2) Set of 5 Components Upper Set for 51mm Illg. [62]()	Specification : ARDE-2064	C	Nonestab
3) DELAY TUBE FOR 51MM ILLG[62]()	Specification : DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d)	C	Nonestab
4) Pin Locking for 51mm Illg. [62]()	Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 SPECN.CQA(A) 2328 (d)	C	Nonestab
5) Ferrule to Drg. no. ARDE 2064[62]()	Specification : SPECN. CQA (A) 2328 (d) DRG. ARDE-2064 (DET NO.21) PT NO. ITV 237	C	Nonestab
6) PARACHUTE HOUSING FOR 51 MM ILLG.[62]()	Specification : DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 SPECN. NO. CQA(A) 2328(d)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG. 1A[62]()	Specification : CQA(A) 2328	C	Nonestab
2) RUBBER WASHER FOR 51MM ILLG.[62]()	Specification : DRG. NO.ARDE 2064 DET NO 17 PT NO ITV 234 SPECN. CQA(A) 2328 (d)	C	Nonestab
3) CUP FOR BOMB 51MM ILLG.[62]()	Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH GREEN[60]()	Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" GREEN DRG. NO. OFDR/CARTG. 1"/G. CONSISTING OF (1) CASE DRG. NO. OFDR/ CARTG1"/G/01 (2) WAD DRG. NO. OFDR/CARTG 1"/02 (3) CAP CHAMBER	C	Nonestab
2) CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1 INCH ILLUMINATING[60]()	Specification : CASE ASSEMBLY EMPTY FOR CARTRIDGE SIGNAL 1" ILLUMINATING DRG NO. OFDR/CARTG/1"/I CONSISTING OF (1) CASE DRG. NO. OFDR/CARTG/1"/I/01 (2) WAD DRG. NO. OFDR/CARTG. 1"/02 (3) CAP CHAMBER OFDR/CARTG. 1"/03.	C	Nonestab

Category :
Grade : Grade III
Size : S

1175

srisaitanvitechnologies
H.NO:3-127/1,NEAR ZPH SCHOOL, BANDLAGUDA,PATANCHERU SANGAREDDY(DIST),TELENGANA PIN:502032 BANDLAGUDA HYDERABAD Telangana
PIN1 : 502032
Phone No. : 227561
GSTIN : 36BQVPV7011C1ZJ

BQVPV7011C

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()	Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION	C	Nonestab

Category :
Grade : Grade III
Size : S

1176

Parag Enterprises
Sr. No. 6/2, Shantinagar, Bhosari, Pune Maharashtra
PIN1 : 411039
Phone No. : 9860308385
GSTIN : 27ADBPN5787H1Z5

PNEP19823G

Download

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) STUD RUBBER TO DRG. PT. NO. 1656 ISV (OEF DRAWING NO. SK-938)()	OEF DRAWING NO. SK-938	R
2) RUBBER STUD ROUND BLACK()	AS PER REQUIREMENT & SPECIFICATION	R
3) PLASTIC TOGGLE BLACK (BELL CAP)()	AS PER REQUIREMENT & SPECIFICATION	R
4) FEMALE CAP (PUSH FIT) AS PER O.E.F.C. DRG.NO. SK - 914()	AS PER REQUIREMENT & SPECIFICATION	R

Category : P
Grade : III
Size : S

1177

JAPTECH INDUSTRIES
GAT NO 624/8, KURULI, ALANDI PHATA, CHAKAN, Pune, Maharashtra, 410501 PUNE NASHIK ROAD PUNE Maharashtra
PIN1 : 410501
Phone No. : 9604344482
GSTIN : 27AABFJ4217F1ZP

AABFJ4217F

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF STAY HAMMER TO DRG No TEND 2016 WITH FIRMS MATERIAL ICR1333[70]()	Specification : AS PER DRG. No. TEND 2016 WITH FIRM'S MATERIAL.(ICR-1333)	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) HAMMER FORGINGS TO DRG M6 0001E FOR RIFLE 7POINT62 MM 1A1 WITH FIRMS MATERIAL ICR 1256 FULLY FINISHED CONDITION 5000 NOS 2500 SETS[70]()	Specification : AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF HOUSING HAMMER SPRING TO DS CAT NO 1005 001682 WITH DC NO 24979 SA DT 27 03 2001 IN FULLY FINISHED CONDITION ICR 1332[70]()	Specification : AS PER DS CAT NO.1005-001682 WITH DC NO.24979-SA DT.27.03.2001 IN FULLY FINISHED CONDITION (ICR-1332)	C	Nonestab

Category :
Grade : Grade III
Size : M

1178

JigTech Enterprises
Plot no. 180 T-Block, Near MIDC Post office Bhosari Pune 411026 Plot no. 180 T-Block Near MIDC Post office Bhosari Pune 411026 Pune Maharashtra
PIN1 : 411026
Phone No. : 27121142
GSTIN : 27AVTPS0293D1Z6

AVTPS0293D

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3[70]()	Specification : AS PER DRAWING OF HANDLE COCKING COMPONENT DRG NO 6P11 9 1 DRG NO 62 C 3901 200 C3	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]()	Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA Description : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA()	Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA	C	Estab
2) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA Description : Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA()	Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.	C	Estab

Category : ddp
Grade : 3
Size : S

1179

S.R.PRECISION
Plot no.183,Sector No.10, PCNTDA Bhosari PCNTDA PUNE Maharashtra
PIN1 : 411026
Phone No. : 9822539583
GSTIN : 27AAAHK8881K1ZO

AAAHK8881K

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()	Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5	C	Nonestab
2) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()	Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) DIAPHRAGM FOR RGB-60[12]()	Specification : AS PER DRAWINGS	C	Nonestab

Category :
Grade : Grade III
Size : S

1180

KOMALA PRECISION
5 5 35 70 PLOT NO 18 PRASHANTH NAGAR KUKATPALLY HYDERABAD shakthipuram HYDERABAD Telangana
PIN1 : 500072
Phone No. : 9397307181
GSTIN : 36ABJPE4470C1ZZ

36ABJPE447

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()	Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY)[90]()	Specification : SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()	Specification : AS PER OFT REQUIREMENT	R	Nonestab
2) 20MM BOLT LEVER 44P 03002[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
3) 14 5MM BOLT LEVER 44P 14014[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
4) BUFFER FORK 44P 04103[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
5) CLAMP NUT 44P 04007[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
6) 44P03010 20MM HAMMER CAM PLATE[70]()	Specification : AS PER OFT SPECIFICATIONS	R	Nonestab
7) 44P14006 14 5MM HAMMER CAM PLATE[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
8) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()	Specification : AS PER OFB REQUIREMENTS	R	Nonestab
9) HAMMER TO DRG NO 44P06013[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
10) RETAINING BLOCK TO DRG NO 44P 06104[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
11) 20MM CAST CARTRIDGE ASSEMBLY TO DRG NO 44P03021[70]()	Specification : AS PER OFT SPECIFICATIONS	R	Nonestab
12) 14 5MM CAST CARTRIDGE EXTRACTOR TO DRG NO 44P14033[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
13) 20MM FIRING PIN TO DRG NO 44P03013[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
14) 14 5MM FIRING PIN TO DRG NO 44P14009[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MSL HOUSING LAUNCHER[70]()	Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S