List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1081 H.C. STRACK GMBH
IM SCHLEEKE 78-91, D - GOSLAR GERMANY GERMANY
PIN1 : 38642
Phone No. : 0049 5321751, 004953217513512 		9926770020

Download 		1Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) TUNGSEN POWDER[AS PER SPECN: ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01.]() AS PER SPECN: ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01. R NOT ESTAB
Category : P
Grade : I
Size : L
1Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) TUNGSTEN POWDER[AS PER SPECN : ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01.]() AS PER SPECN : ARDE/SPECN/PNWH/MAT/TAP - 2012, ISSUE - 01. R NOT ESTAB.
Category : P
Grade : I
Size : L
1Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) TUNGSTEN POWDER[CQAM-58, ARDE-PNWH-MAT-TAP-2012]() CQAM-58, ARDE-PNWH-MAT-TAP-2012 R ESTAB.
Category : DDP
Grade : I
Size : L
1082 Nilkamal Limited
Nilkamal House, M.I.D.C Andheri East Street No NO.13 Mumbai Maharashtra
PIN1 : 400093
Phone No. : 26818592
GSTIN : 27AAACN2329N1ZA 		MUMN07184C

Download 		1Ordnance Factory Bolangir

Name Specification Use Status
1) AMMUNITION CONTAINER 69A/L, PLASTIC[14]() Specification : AMMUNITION CONTAINER 69A/L, PLASTIC TO DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO.CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/ CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX). C Nonestab
2) CONTAINER 38B DRG.NO-CIA/AMN/2008[14]() Specification : CONTAINER 38B WITH PACKING FITMENTS DESIGNER REF.No.-CIA/AMN/2008 & DRG. PT. NO.ISV-464-A DC-36787-A DT.15.10.01 CONSISTING OF 1. BOD Y DRG PART NO-ISV-1557 DC-36177 DT.28.09.96 (01 No.) 2. LID TO DRG. PART No.ISV-1558 DC-36177-A DT.28.09 C Nonestab
3) AMMN.CONTAINER 47 B[14]() Specification : AMMN.CONTAINER 47 B FOR FUZE 117 MK-20 TO ISV-515A DC.36647.A RETRACED Dt.12.07.2013. C Nonestab
Category : p
Grade : Grade III
Size : L
1Ordnance Factory Khamaria

Name Specification Use Status
1) PLASTIC PACKAGE FOR PRE-FRAG 100-120 KG BOMB (9911358232)[99]() Specification : PLASTIC PACKAGE FOR PRE-FRAG OFAB 100-120 KG BOMB TO DRG. ARDE.0303 00 04 00 00 000 12 PB & SPECN.NO. DRDO-ARDE-ADM-HSD-002-2012. REV 1 DTD 26 MAY'2014. P Nonestab
2) PACKAGE TO DRG NO 08040002000000000 LF 9911358292[99]() Specification : PACKAGE TO DRG.NO.ARDE 08040002000000000PB,DTD 14/05/2015. P Nonestab
3) INNER PACKING FITMENT OF BOX C-235 (9911358241)[99]() Specification : SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098. P Nonestab
Category : p
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6570250010 PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802[65]() Specification : PACKING FITMENT FOR 155 MM BBU AS PER DRG NO PROP SK 802 C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6356000017 LLDPE PACKAGE BOX FOR INFLUENCE MINE MK II EMPTY ASSEMBLY TO ARDE DRG NO 9707 00 04 00 00 000 00TA AS PER QAP NO NFM IMMK II PKG 02[63]() Specification : LLDPE PACKAGE BOX FOR INFLUENCE MINE MK-II (EMPTY ASSEMBLY)TO ARDE DRG. NO. 9707 00 04 00 00 000 00TA AS PER QAP NO.NFM/IMMK-II/PKG/02 C Nonestab
Category :
Grade : Grade III
Size : L
1Rifle Factory Ishapur

Name Specification Use Status
1) BOX FOR 10 NOS OF GHAATAK[70]() Specification : BOX FOR 10 NOS OF GHAATAK RIFLE TO DRG NO. RFI SK NO. 10393 FOR 7.62 ASSAULT RIFLE GHAATAK C Nonestab
Category : p
Grade : Grade III
Size : L
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]() Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040STAR4 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE E Nonestab
Category :
Grade : Grade III
Size : L
1Small Arms Factory

Name Specification Use Status
1) Magazine Assembly for JVPC[70]() Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE)COATED AS PER DRG NO.0204-03-03-00-07-000- 00DD C Nonestab
Category :
Grade : Grade III
Size : L
1Small Arms Factory

Name Specification Use Status
1) Magazine Assy for JVPC[70]() Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416) C Nonestab
2) Magazine Assy with NI PTFE Coated for JVPC[70]() Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6570250309 PACKING FITMENT FOR MINE AT 1B ND[65]() Specification : PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177 C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6570250308 PACKING FITMENT TOP AND DISC MIDDLE[65]() Specification : JSS 9330-03: 2007 C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6356000016 CONTAINER CLEARING CHARGE EMPTY ASSY TO DRAWING NO ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK II FILLING AND ASSEMBLY[63]() Specification : CONTAINER CLEARING CHARGE (EMPTY ASSY.) TO DRAWING NO. ARDE9707 00 01 01 17 000 00TA FOR INFLUENCE MINE MK-II - FILLINGAND ASSEMBLY. C Nonestab
2) 6454000058 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY[64]() Specification : SQUIB PLUG (BRIDGED)(EMPTY) FOR CONTAINER CLEANING CHARGE TODRAWING NO.ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK-II-FILLING AND ASSEMBLY. C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PACKING BOX FOR UBGL() DRAWING NO 32Y 0001 005 D3 E ESTAB
Category : DDP
Grade : I
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL[70]() Specification : AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL E Estab
Category : DDP
Grade : I
Size :
1Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE Description : 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE() Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND SPECIFICATION NO.S-I/CM/IMMK II/ATP/01. C Nonestab
Category : p
Grade : 3
Size : L
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PISTOL GRIP FOR JVPC Description : PISTOL GRIP FOR JVPC() Specification : PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Estab
Category : ddp
Grade : 3
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-12 (FILLED) TO DRG. NO. ODC/AFK-096-15[65]() Specification : DRG. NO. ODC/AFK-096-15 C Nonestab
2) FRP BOX WITH PACKING FITMENTS FOR PACKING ROCKET RGB-60 (FILLED), TO DRG. NO. ODC/AFK-086-15[65]() Specification : DRG. NO. ODC/AFK-086-15 C Nonestab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) BASE CAP (BLACK) FOR PROJECTILE TO DRG. NO. AFK/PJ/SK-62/1[60]() Specification : DRG. NO. AFK/PJ/SK-62/1 C Estab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) CARRIER AMMUNITION 10 C , DESIGNER'S REF CIA/AMN/2317 PART NO.ISV 495A,SPECN CQA(A)2804[65]() Specification : CQA(A)2804 C Estab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC INDEX DISC-SHOT NO.1[60]() Specification : DRG. NO. AFK/SK-2888 C Estab
2) PLASTIC INDEX DISC-SHOT NO.BB[60]() Specification : DRG.NO.AFK/SK-2888 DT.17.01.2007 C Estab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC POWER PISTON WITHOUT POUCH FOR 65MM /70MM12 BORE PAPER CARTRIDGES AS PER AFK DRG.NO. KF/SK-1809[21]() Specification : AFK DRG.NO. KF/SK-1809 C Estab
Category : p
Grade : Grade II
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) PLASTIC INDEX DISC FOR CARTG. SA 12 BORE 65/70 MM TO DRG. NO. AFK/SK-2888 DT. 17/01/2007[60]() Specification : DRG. NO. AFK/SK-2888 DT. 17/01/2007 C Estab
2) PLASTIC MOULDED ITEMS FROM 5 GRAMS TO 5.5 KILOGRAMS[60]() Specification : AS PER AHSP/ AFK SPECIFICATION C Estab
Category : p
Grade : Grade II
Size : L
1Small Arms Factory

Name Specification Use Status
1) PACKING BOX[25]() Specification : PACKING BOX, FOR 7.62 X 51MM LMG, DRG NO.SK-6126. C Nonestab
2) MUZZLE CAP MOULDING[70]() Specification : MUZZLE CAP MOULDING DRG. NO. 0204 04 04 00 00 000 00AA C Nonestab
3) Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA[7012670010]() Specification : Upper Hand Guard Assembly for CQB 5 56 x 45 MM DRG No 1901 01 01 00 00 001 00DA C Nonestab
4) Lower Hand Guard Assembly for CQB 5 56x45 MM[7012670011]() Specification : Lower Hand Guard Assembly for CQB 5 56x45 MM DRG No 1901 01 01 00 06 000 00DA C Nonestab
5) PISTOL GRIP FOR JVPC[70]() Specification : PISTOL GRIP FOR JVPC 5.56 X 30MM DRG NO. 0204-03-04-00-02-001-12DA SHEET NO.1/2 & DRG NO. 0204-03-04-00-02-001-22DA SHEET NO.2/2 CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D' C Nonestab
Category :
Grade : Grade III
Size : L
1Small Arms Factory

Name Specification Use Status
1) Packing Box for Revolver 0 32 Side Swing DRG No SK 6263 R SW[25]() Specification : Packing Box for Revolver 0.32 Side Swing DRG No.SK-6263 R/SW. C Nonestab
2) PACKING BOX FOR LMG[25]() Specification : PACKING BOX FOR 7.62 X 51MM LMG. DRG No. SK-6126 C Nonestab
3) Packing Box For LMG[25]() Specification : Packing Box for 7.62 X51mm LMG/GPMG, drawing no. SK-6126 E Nonestab
4) DEVELOPMENT MANUFACTURE AND SUPPLY OF PACKING BOX AS PER SPECIFICATION NO 7167 PACKING BOX SPEC CQB ATTACHED[70]() Specification : AS PER SPECIFICATION NO.7167/PACKING BOX/SPEC/CQB (ATTACHED) C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) 6573020501 AMMUNITION CONTAINER NO 6717 AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3[65]() Specification : AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3 C Nonestab
2) 6012000030 BRASS CUP DRAWING NO AFK DEV 303[60]() Specification : BRASS CUP FOR CARTG SA 7.62 MM BLANK AND 0.30 ''-06 SPORTING AMMUNITION CASES AS PER DRAWING NO AFK/DEV- 303 R Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MAGAZINE ASSY AS PER DRG No K 7000 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No. K 7000 WITH FIRM'S MATERIAL E Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050[70]() Specification : POLYMER MAGAZINE ASSY COMPATIBLE FOR 7 point 62 into 39mm RIFLE CAPACITY 30 RDS WITH TRANSPARENT VIEWING WINDOW SLOT ON BOTH SIDES AS PER SCOPE OF WORK ENCLOSED REQUIRED FOR TAR LF No 7024007050 C Nonestab
2) 20MM MAGAZINE ASSY TO DRG NO 10000 ST REQ FOR AMR[70]() Specification : AS PER REQ C Nonestab
3) PACKING BOX FOR 12 7mm SRCG AS PER DRG NO FC ELB000411 AND Y36314 A 00[74]() Specification : As per OFB Requirements E Nonestab
4) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]() Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310 C Nonestab
5) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]() Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR C Nonestab
6) MAGAZINE BOX ASSY[74]() Specification : MAGAZINE BOX ASSY AS PER DRG.Y25676A-00 FOR MAGAZINE ASSY OF SRCG C Nonestab
7) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]() Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA C Nonestab
8) Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR[70]() Specification : Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR E Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY LF No 7011655072[70]() Specification : As per Drawing E Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6191700063 PACKING BOX FOR ASSY OF PINAKA RKT[61]() Specification : PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 2103780011 ANTISTATIC POLYTHENE TUBING FOR 120[21]() Specification : ANTISTATIC POLYTHENE TUBING FOR 120 MM FSAPDS & HESH AMMN. TO DRG.NO. ARDE 9759 DET. NO. 21. C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6570250309 PACKING FITMENT FOR MINE AT 1B ND[65]() Specification : PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177 C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6584113900 CONTAINER 39A[65]() Specification : SPECN. NO. CQA(A) 2805 C Estab
2) 6580853267 CONTAINER 63A ISV 506A[65]() Specification : AMMUNITION CONTAINER 63A DRG.PT.NO.ISV 506-A DC NO.36166-A C Estab
3) 6572129007 CONT.38B (PLASTIC)[65]() Specification : CONT.38B, CONSISTING 1.BODY 2.LID .3.RING-A. 4.DISC 5.DISC 6.SLEEVE. C Estab
4) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]() Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008 C Estab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6571551172 BOX B-7 A DRG. ISV -505A DC(I)34047-[65]() Specification : SPECN NO. IA 1169 C Nonestab
2) 6141156496 AMN.CONTAINER BOX D4C DRG.ISV 540A[61]() Specification : SPECN. NO. IA-1163 C Nonestab
3) 6576773398 AMN CONTAINER BOX C 53A ISV 574 A[65]() Specification : AMMUNITION CONTAINER BOX C 53-A (STEEL) FOR PACKING OF 130MMAMMUNITION TO DRG. PART NUMBER ISV 574-A DC NUMBER 37047-A DATED 20/03/2006. C Nonestab
4) 6570963318 BOX C 52 A STEEL DRG NO ISV 573A[65]() Specification : AMMUNITION CONTAINER BOX C 52-A (STEEL) FOR PACKING OF 125 MM HEAT TO DRG.PT.NO.ISV-573-A DC NO.37051-A DT 05-05-2006 . C Nonestab
Category :
Grade : Grade III
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6571347549 CARRIER 10 C (PLASTIC), ISV 495-A[65]() Specification : SPECN.NO. CQA(A) 2804 C Nonestab
Category : dp
Grade : Grade I
Size : L
1Ordnance Factory Chanda

Name Specification Use Status
1) 6356000009 FRP PACKAGE BOX FOR INFL MINE MK II[63]() Specification : FRP PACKAGE BOX TO ARDE DRG.NO.9707 00 03 00 01 000 00TA FORINFLUENCE MINE MK-II. C Nonestab
2) 6206500061 MINE BODY A T DRILL 1A ND EMPTY[62]() Specification : MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C ND TO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GE DC NO. 37050-A DTD 19/04/06, SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06. C Nonestab
Category : p
Grade : Grade III
Size : L
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) BOX 7A (PLASTIC) Description : BOX 7A (PLASTIC)() Specification : BOX 7A (PLASTIC) TO DRG.NO. ISV 441A (ARDE-1431), DC NO. 35596A DT.01.10.93. C Estab
2) MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A Description : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A() Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN. CQA(A) 1817(t) DC NO. 37096-A, DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347, END CAP ITX 344, PLUG CLOSING BOTTOM ITX 340, PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANT C Estab
3) FUZE ANTIREMOVAL MINE AT 2B ND EMPTY Description : FUZE ANTIREMOVAL MINE AT 2B ND EMPTY() Specification : FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO. ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT. 03.05.94 SCANNED DT. 10.10.02 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02. C Estab
4) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) Description : FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)() Specification : FUZE MINE A/T 4A ND (EMPTY ASSEMBLY)TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN.NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002.[REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY)TO IQX 86A DC NO.35879-A DT.20.12.94 (2) C Estab
Category : p
Grade : 3
Size : L
1Heavy Alloys Penetrator Project

Name Specification Use Status
1) CENTERING BAND FOR 120 MM FSAPDS MK II[99]() Specification : RAW MATERIAL - NYLON 66 GP MOULDING GRADE NATURAL TO SPECIFICATION DEF STANDARD 93-8 / MARANYL NYLON A 100 C Nonestab
Category : p
Grade : Grade II
Size : L
1Small Arms Factory

Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Nonestab
Category : p
Grade : Grade III
Size : L
1Small Arms Factory

Name Specification Use Status
1) Plastic Packaging Box for 10 JVPC[14]() Specification : Plastic Packaging Box for 10 JVPC 5.56X30MM along with Accessories. Drg. No.SK-JVPC-1072. C Nonestab
2) TRIGGER GUARD MOULDING for JVPC[70]() Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC C Nonestab
3) GAS CYLINDER COVER MOULDING FOR JVPC[70]() Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB C Nonestab
4) Retainer for JVPC[70]() Specification : Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC C Nonestab
5) Hand Guard Assembly for JVPC[70]() Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw C Nonestab
6) CARRYING HANDLE MOULDING BLACK FOR LMG 5 56[70]() Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINISHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR C Nonestab
Category : p
Grade : Grade III
Size : L
1Small Arms Factory

Name Specification Use Status
1) FORE GRIP ASSEMBLY SK 6632 TE[70]() Specification : FORE GRIP ASSEMBLY SK- 6632/TE C Nonestab
2) MAGAZINE ASSEMBLY SK 6614 TE[70]() Specification : MAGAZINE ASSEMBLY SK- 6614/TE C Nonestab
3) HAND GUARD ASSEMBLY SK 6624 TE[70]() Specification : HAND GUARD ASSEMBLY SK- 6624/TE C Nonestab
4) Pistol Grip Assembly SK 6646 TE[70]() Specification : Pistol Grip Assembly SK-6646/ TE C Nonestab
5) Pistol Grip Box assembly SK 6649 TE[70]() Specification : Pistol Grip Box assembly SK- 6649/ TE C Nonestab
6) BUTT ASSEMBLY DRG No SK 6650 TE[70]() Specification : BUTT ASSEMBLY DRG No.SK-6650/TE C Nonestab
Category :
Grade : Grade III
Size : L
1083 GMT UDYOG
167/A, ANANDAMATH, ICHAPUR,24 PARGANAS (N), WEST BENGAL ANANDAMATH ICHAPUR West Bengal
PIN1 : 743144
Phone No. : 9433461011
GSTIN : 19AJCPG0113D1Z1 		CALK08044B

Download 		1Gun and Shell Factory

Name Specification Use Status
1) GRENADE BODY BLANK TO GSF DRG NO M 11220[62]() Specification : AS PER DRAWING R Nonestab
2) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG NO CTM 0154 THROUGH INVESTMENT CASTING ROUTE IN FC[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) CONTACT TO DET NO.2-12 OF DRG NO.3 024045 TO SK NO. OTF/DD/011 IN F/C DC NO.36325 A DT.26.8.97() AS PER DRG & SPECIFICATION C NOT ESTAB.
2) REAR SIGHT BASE F1303 028081D IN F/C DC NO. 19106 W DT.16.1.08() AS PER DRG & SPECIFICATION C NOT ESTAB.
3) BRACKET TO DRG NO.F 1303 028060 IN F/C D.C.I NO.19106W DT.16.1.08() AS PER DRG & SPECIFICATION C NOT ESTAB.
4) NUT TO DET NO.2-16 OF DRG NO.3 024045 GSF SK NO.OTF/DD/006 IN F/C() AS PER DRG & SPECIFICATION C NOT ESTAB.
5) NUT TO DET NO. 1-5 OF DRG NO 3 024044 GSF SK NO.OTF/PG/003 IN F/C() AS PER DRG & SPECIFICATION C NOT ESTAB.
6) CAP IN F/C TO DET NO 1-6 OF DRG NO. 3-024044 GSF SK NO OTF/PG/002 DC NO.36325 A DT.26.8.97() AS PER DRG & SPECIFICATION C NOT ESTAB.
7) CLEANING BRUSH (HARD) TO DRG.NO:IRCL 579(GF 215078 H) IN F/C .DC NO.19243-W DT.24.02.2012() AS PER DRG & SPECIFICATION C NOT ESTAB.
Category : P
Grade : III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) PUSH PIN & LOCK PIN TO DRG. NO. CTM-0111/1 TO CTM-0111/6[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Slush Brush[70]() Specification : as per Drg. No.: K-9009 with Firm’s Material E Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BRUSH AS PER DRG No K 9003 STAR WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9003* WITH FIRMS MATERIAL E Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Slush Brush[70]() Specification : as per Drg. No.: K-9009 with Firm’s Material E Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PIN AXIS ROD TO D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)[70]() Specification : AS PER D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]() Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025 C Nonestab
2) OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE[70]() Specification : OIL BOTTLE AS PER DRG NO K 9028 REQUIRED FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION.[71]() Specification : BRUSH CLEANING 7.62MM BORE 1A. DS CAT NO. 1005-000332 DC(I)20404-SA DT.19.5.89 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION.[70]() Specification : BRUSH CLEANING SA NO.3MK-I.FOR GUN MACHINE(MAG)7.62MM 2A DS CAT NO. 1005-000712 DC(I) NO.21782-SA DT.17.6.92 IN FINISHED CONDITION. C Nonestab
2) BRUSH CLEANING for MAG[71]() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO.17850-SA DT.12.4.84 IN FINISHED CONDITION. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Brush Cleaning Chamber[71]() Specification : Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]() Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010. C Nonestab
2) BRUSH CLEANING CHAMBER FOR MAG[71]() Specification : BRUSH CLEANING 7.62MM CHAMBER/GAS CYLINDER 1A. DS CAT NO. 1005-000715 DC(I) NO. 17850-SA DT.12-4-84 IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) PIN DRG No SK 6531 TE[70]() Specification : PIN DRG No SK- 6531/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SELECTOR STOP AS PER DRG No K 1103 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 1103 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) RIVET BULLET GUIDE AS PER DRG NO K 1102 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1102 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) RIVET SUPPORTING SIDE AS PER DRG NO K 4014 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 4014 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PIN CATCH MAGAZINE AS PER DRG NO K 1113 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 1113 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109[70]() Specification : SET OF RIVETS FOR TAR RECEIVER ASSY AS PER 07 DRG NoS K1102 K1103 K1105 K1107 K1113 K4014 K1109 C Nonestab
Category :
Grade : Grade III
Size : S
1084 M/s UNIVERSAL ENGINEERING CORPORATION
713, SADASHIV PETH, KUMTHEKAR ROAD, SHALIMAR LODGE BLDG. PUNE MAHARASHTRA
PIN1 : 411030
Phone No. : 24371024
GSTIN : 27AABFU1769R1ZE 		PNEU00219C

Download 		1High Explosive Factory

Name Specification Use Status
1) FILLING HOLE PLUG() CQA(A)1504-ITW-69 C NOT ESTAB
Category : P
Grade : II
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) IGNITION ELEMENT FOR PRIMER M 191 A2 CQA(A) SEALED DRG.NO. 04-44-79000-06105-4E() CQA(A) SEALED DRG.NO. 04-44-79000-06105-4E C Non Established
2) PLUNGER GUIDE DRG NO.04-44- 79000-06112-4 E() CQA(A) SEALED DRG.NO. 04-44- 79000-06112-4 E C Non Established
3) PLUNGER DRG. NO. 04-44-79000- 06111-4 E() CQA(A) SEALED DRG.NO. 04-44-79000- 06111-4 E C Non Established
4) P.R.F. (MODIFIED) FOR 40MM AMMN. AS PER DRG.NO. AFK/SK-215-05. dt. 13.09.2011() DRG.NO. AFK/SK-215-05 C Non Established
5) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN NO CQA(A) 0922() CQA(A) 0922 C Established
6) CENTRE PIECE DES REF NO CIA/AMN/1799 DET NO. 2 PT NO ITW 64, SPECN CQA(A) 1504 () CQA(A) 1504 C Established
7) CHAMBER DESIGN REF.NO. CIA/AMMN/474/PART NO. QX 40 DC 35853 A WITH AIDE MEMORIE NO. C7/5() DRG. NO. CIA/AMMN/474 PART NO.QX 40 C Established
8) IGNITION ELEMENT (EMPTY) TO DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A() DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A C Established
9) IGNITER CASING TO CQA(A) SEALED DRG NO 04-749-130222-03.1E() CQA(A) SEALED DRG NO 04-749-130222-03.1E C Established
10) INTERMEDIATE CASING TO CQA[A] SEALED DRG NO 04-749-130222-02.1E() CQA[A] SEALED DRG NO 04-749-130222-02.1E C Established
11) SPACER RING TO CQA[A] SEALED DRG.NO. 04-749-130222-03.4E() CQA[A] SEALED DRG.NO. 04-749-130222-03.4E C Established
12) SLUG FOR CASE FOR 14.5 MM ATA TO AFK DRG. NO. AFK/PJ/SK-56() DRG. NO. AFK/PJ/SK-56 R Non Established
Category : P
Grade : II
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) SEALS LEAD 10 MM DIA() Specification : IND/GS/783 R Estab
2) FIRING PIN TO CQA DRG 04-749-13022() Specification : CQA[A] SEALED DRG NO.04-749-130222-03.2E R Estab
3) PLUG REPRESENTING FUZE DA5A() Specification : DRG.NO.ARDE 2236, DET.NO.16,PART NO.ITV 285 R Estab
4) PISTON TO DRG NO ARDE 2015() Specification : ARDE 2015 DET 23 DATED 08-11-85 R Estab
5) IGN. ELEMENT,FIRE. BOLT,SAFETY CASE() Specification : DRG.NO. CQA(A)/AMN/3229 PART NO. IQV 30 A R Estab
Category : p
Grade : 2
Size : S
1085 SHREE BABU INDUSTRIES
HOUSE NO. 1051 HANUMANTAL JABALPUR Madhya Pradesh
PIN1 : 482001
Phone No. : 2336000
GSTIN : 23AGCPJ3091Q2Z5 		AGCPJ309LQ

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
2) CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]() Specification : CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020 R Nonestab
Category :
Grade : Grade III
Size : S
1086 R.K. ENTERPRISES
FCA-4029, SGM NAGAR,NIT FARIDABAD SGM NAGAR FARIDABAD Haryana
PIN1 : 121001
Phone No. : 2416757 		RTKP05255F

Download 		1Ordnance Factory Dehradun

Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1Ordnance Factory Dehradun

Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1Ordnance Factory Dehradun

Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1Ordnance Factory Dehradun

Name Specification Use Status
1) TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG. NO. MCT-2705 COMPLETE. FOR COLLIMETER INFINITY() As per required Specification C Not Estab.
Category : DDP,DP
Grade : II
Size : S
1Ordnance Factory Dehradun

Name Specification Use Status
1) ASSEMBLY OF KARABINER SCREW TYPE DRG.NO. S-1815-00, COMPRISING OF: (1) BODY, (2) LOCKING SCREW, (3) LEVER, (4) COMPRESSION SPRING, (5) BIT, (6) RIVET. NOTE: ITEM NO.1, 2,3,4,5 WILL BE SUPPLIED BY OFD & ITEM NO.6 WILL BE MANUFACTURED BY TRADE IT SELF FOR ASSEMBLY.() As per required specification C Not Estb.
Category : DDP,DP
Grade : II
Size : S
1Ordnance Factory Dehradun

Name Specification Use Status
1) ASSEMBLY OF KARABINER SCREW TYPE DRG.NO. S-1815-00, COMPRISING OF: (1) BODY, (2) LOCKING SCREW, (3) LEVER, (4) COMPRESSION SPRING, (5) BIT, (6) RIVET. NOTE: ITEM NO.1, 2,3,4,5 WILL BE SUPPLIED BY OFD & ITEM NO.6 WILL BE MANUFACTURED BY TRADE IT SELF FOR ASSEMBLY.() As per required specification C Not Estb.
Category : DDP,DP
Grade : II
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138[62]() Specification : DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138 E Nonestab
Category : p
Grade : Grade II
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138[62]() Specification : DOUBLE WIRE LED LIGHT ASSY / CQA(HV)5.70.138 E Nonestab
Category : p
Grade : Grade II
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) MARKER LIGHT GCT-64-KL[18]() Specification : DRG NO. 172.71.035CB-2CB C Nonestab
Category : p
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) MARKER LIGHT GCT-64-KL[18]() Specification : DRG NO. 172.71.035CB-2CB C Nonestab
Category : p
Grade : Grade III
Size : S
1087 ALCOA FORGINGS & EXTRUSIONS HANNOVER.
GOTTINGER CHAUSSEE 12 - 14. HANNOVER. GERMANY.
PIN1 : 911364
Phone No. : 004951142075447 		0126700327

Download 		1Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) ALUMINIUM ALLOY ROD 75 MM DIA[DTD 5124]() DTD 5124 R ESTAB.
Category : DDP
Grade : I
Size : L
1088 NEW METALS & CHEMICALS LTD
RUE DE ST LAWRENCE, WALTHAM ABBEY. ESSEX, EN9 1PF. UNITED KINGDOM
PIN1 : 768393
Phone No. : 00441992711111 		GB23300133

Download 		1Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) COBALT POWDER[CQAM - 58]() CQAM - 58 R ESTAB.
2) IRON POWDER.[CQAM - 58]() CQAM - 58 R ESTAB.
3) MOLYBDENUM POWDER.[CQAM - 58]() CQAM - 58 R ESTAB.
Category : DDP
Grade : I
Size : L
1089 JK Rubber Products
Mini Industrial Estate, PO Balla, (Via) Anandshram, Kanhangad, Kasaragod District Kerala
PIN1 : 671531
Phone No. : 1) 0467-2204565, 2) 2218167, 3) 9388221720
GSTIN : 32ACIPJ2069E1ZY 		CHNJ00412G

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) Cord Rubber() As per drawing E Established
2) Plug Rubber() As per drawing E Established
3) Sealing Rings() As per drawing E Established
4) Branch Pipe (Rubber)() As per drawing E Established
5) Lever Handle() As per drawing E Established
6) Hoses() As per drawing E Established
7) Gaskets() As per drawing E Established
8) Shock Absrober() As per drawing E Established
9) RUBBER TUBES(9 TYPES)() DRG.NO.HVF/T-90/GENERIC-N C Non Established
10) COLLAR() DRG.NO.432.40.047-4 C Non Established
11) COLLAR() DRG.NO.432.40.036-2 C Non Established
12) SEAL & SPRING SET(02 TYPES)() DRG.NO.CQA(HV)5.51.001 & CQA(HV)5.51.002 C Non Established
Category : P
Grade : III
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) Air Supply Hose() 20-09-65-1 E Estab.
2) Assy Sleeve() SB 20-12-22 E Estab.
3) Bellow() 334-80 E Estab.
4) Bush() 20-23-44-1 E Estab.
5) Casing() 334-80-2 E Estab.
6) Cork() 340-18-1 E Estab.
7) Corrugated Oil Seal() 411-73-2A E Estab.
8) Gasket() 20-01-51-1 E Estab.
9) Gasket() 20-01-71-5 E Estab.
10) Gasket() 20-35-85 E Estab.
11) Gasket() 3327-140-1 E Estab.
12) Gasket() 3335-207 E Estab.
13) Gasket() 3335-211 E Estab.
14) Gasket() 3335-38-4 E Estab.
15) Gasket() 3335-38-5 E Estab.
16) Gasket() 420-149-1 E Estab.
17) Gasket() 420-149-2 E Estab.
18) Gasket() 420-149-3 E Estab.
19) Gasket() 420-149-5 E Estab.
20) Gasket() 447-37A E Estab.
21) Hose() 36-17-55 E Estab.
22) Hose() 321-20 E Estab.
23) Hose() 3321--09-1 E Estab.
24) Hose() 3321-105 E Estab.
25) Hose() 3342-231 E Estab.
26) Hose() 3342-251 E Estab.
27) Hose() 3342-252 E Estab.
28) Hose() 3342-252-3 E Estab.
29) Hose() 3342-254 E Estab.
30) Hose() 3342-256 E Estab.
31) Hose() 3342-298 E Estab.
32) Hose() 421-20 E Estab.
33) Packing Ring() 175-52-037 E Estab.
34) Packing Ring() 334-31 E Estab.
35) Packing Ring() 334-41 E Estab.
36) Packing Ring() 432-40-103 E Estab.
37) Packing Ring() 2262-A-17 E Estab.
38) Packing Ring() 2262-A-166 E Estab.
39) Packing Ring() 2262-A-170 E Estab.
40) Packing Ring() 3338-440 E Estab.
41) Pipe() 340-266 E Estab.
42) Pipe() 436-17-55 E Estab.
43) Pipe() 3334-238 E Estab.
44) Ring() C5-111 E Estab.
45) Ring() 20-01-10-1 E Estab.
46) Ring() 20-08-246 E Estab.
47) Ring() 20-11-74-2 E Estab.
48) Ring() 20-11-80-2 E Estab.
49) Ring() 20-12--90 E Estab.
50) Ring() 20-13-28 E Estab.
51) Ring() 303-10-4 E Estab.
52) Ring() 303-11-2 E Estab.
53) Ring() 303-161A E Estab.
54) Ring() 303-38-11 E Estab.
55) Ring() 303-38-13 E Estab.
56) Ring() 303-41 E Estab.
57) Ring() 355-48-026-1 E Estab.
58) Ring() 355-48-044 E Estab.
59) Ring() 355-48-091 E Estab.
60) Ring() 355-48-045-01 E Estab.
61) Ring() 355-48-054 E Estab.
62) Ring() 506-100 E Estab.
63) Ring() 523-31-1A E Estab.
64) Ring() 523-67A E Estab.
65) Ring() 525-265 E Estab.
66) Ring() 3301-176A E Estab.
67) Ring() 3319-220 E Estab.
68) Ring for Cover() 313-17-2 E Estab.
69) Rubber Ring() 303-38-3 E Estab.
70) Rubber Ring() 523-31-1A E Estab.
71) Rubber Ring() 523-67A E Estab.
72) Rubber End-piece() CT-109-86 E Estab.
73) Sealing Ring() 20-01--38 E Estab.
74) Sealing Ring() 20-06-110 E Estab.
75) Sealing Ring() 20-06-111 E Estab.
76) Sealing Ring() 20-08-248 E Estab.
77) Sealing Ring() 20-09-28 E Estab.
78) Sealing Ring() 303-12 E Estab.
79) Sealing Ring() 323-31-4 E Estab.
80) Sealing Ring() 327-128 E Estab.
81) Sealing Ring() 334-41 E Estab.
82) Sealing Ring() 355-48-044 E Estab.
83) Sealing Ring() 3334-171 E Estab.
84) Sealing Ring() 3334-79-2 E Estab.
85) Sealing Ring() 3D-20-18-25-1 E Estab.
86) Sealing Ring() 3D-20-18-27-1 E Estab.
87) Sealing Ring Assy() SB 315-668 E Estab.
88) Seal with Spring() SB 308-116A E Estab.
89) Seal with Spring() SB 308-170 E Estab.
90) Washer() C5-042 E Estab.
Category : P
Grade : II
Size : M
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Packing 645 01 7317 1 Description : Packing 645 01 7317 1() Specification : Packing Drg. No. 645-01-7317-1 C Estab
2) Packing Drg No 645 01 7339 1 Description : Packing Drg No 645 01 7339 1() Specification : Packing 645-01-7339-1 Specification Plate 20, Type 005216-75 C Estab
Category : p
Grade : 3
Size : S
1090 Biihani Manufacturing Co. Pvt. Ltd.
B-184 Okhla Industrial Area, Phase-1 Phase-I NEW DELHI Delhi
PIN1 : 110020
Phone No. : 26371343
GSTIN : 08AAACB2742F1Z2 		AAACB2742F

Download 		1Ordnance Cable Factory Chandigarh

Name Specification Use Status
1) PVC COMPOUNDS WL 80B LT-42[70]() Specification : PVC COMPOUNDS WL 80B LT-42 R Estab
2) PVC MASTER BATCHES GREY, BLACK[70]() Specification : PVC MASTER BATCHES GREY, BLACK R Estab
3) PVC Compound BS 6746 TYPE-6 WB-85[70]() Specification : PVC Compound BS 6746 TYPE-6 WB-85 R Estab
4) PVC MASTER BATCHES OF VARIOUS KINDS[70]() Specification : AS PER RELEVENT SUPPLY ORDER R Estab
5) POLYTHENE COMPOUND BLACK D10[70]() Specification : POLYTHENE COMPOUND BLACK D10 R Estab
Category :
Grade : Grade III
Size : M
1091 TVC AUTO COMPONENTS PVT LTD
46 SUVARNA LAGHU UDYOG, ELECTRONIC ZONE MIDC HINGNA ROAD NAGPUR Maharashtra
PIN1 : 440016
Phone No. : 7030884466
GSTIN : 27AAFCT9139F1Z2 		AAFCT9139F

Download 		1Ordnance Factory Bhusawal

Name Specification Use Status
1) LINK FOR HANDLE FOR BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhusawal

Name Specification Use Status
1) 9911842201 LINK FOR HANDLE[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
2) 9911842695 HINGE PIN FOR STEEL BOX H5A[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhusawal

Name Specification Use Status
1) 9911842696 LID LINK FOR CATCH LOCKING H5A[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
2) 9911846331 HINGE LINK FOR CARRIER 13 16[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhusawal

Name Specification Use Status
1) 9911842202 HINGE PIN DRG NO OFBC 700[07]() Specification : HINGE PIN DRG. NO. OFB/C/700 R Nonestab
Category :
Grade : Grade III
Size : S
1092 JAYASREE CHEM
2A/8, THULASI STREET, VENKATAPURAM, AMBATTUR CHENNAI TAMILNADU
PIN1 : 600053
Phone No. : 044-26573040, MOB : 9965550888
GSTIN : 33AKAPJ8702G1ZJ 		AKAPJ8702G

Download 		1Cordite Factory Arvankadu

Name Specification Use Status
1) OLEUM, TECH GRADE-I WITH 20 % FREE SO3() IS 1089-1986, REV NO. 2 R Not Estab.
2) SULPHURIC ACID, TECH GRADE, 98.0 % MIN() IS 266-1993, III REV R Not Estab.
Category : S
Grade : I
Size : S
1093 VXL TECHNOLOGIES LTD.
20/3, MATHURA ROAD FARIDABAD HARYANA
PIN1 : 121006
Phone No. : 0129 2305600
GSTIN : 06AAACV2853K1Z7 		RTKV01570C

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) SPIRAL() DRG. NO. 6W8-367.009 (2 SHEETS) C ESTABLISHED
Category : P
Grade : I
Size : M
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354 Description : EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354() Specification : EMPTY ASSY.FUZE B-25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET R Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Khamaria

[Deemed Registration]
Name Specification Use Status
1) CARTG PP3 EOFE EMPTY ASSY TRD-1279 (9911351544) Description : CARTG PP3 EOFE EMPTY ASSY TRD-1279 (9911351544)() Specification : CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23 C Estab
Category : p
Grade : 3
Size : M
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) FUZE PERCUSSION D.A NO 5 A (EMPTY) DRG. NO. ARDE 2236 SHEET NO.2 PART NO. IQX 79 GE() Specification : CQA(A) 0922 R Estab
Category : p
Grade : 1
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) FUZE (EMPTY) FOR ROUND 40 MM MGL() Specification : DRG. AFK/SK -576-09 Sht. 1 DT. 22.11.2009 R Estab
2) FUZE TIME & PERCUSSION DA NO. 213 MK5 (M1) EMPTY DESIGN. REF NO. ARDE 1633 DETAIL NO. 1 PT. NO. IQX 52GE SPECN. L 9974-F() Specification : L 9974-F R Estab
3) FUZE ALLWAYS MK II EMPTY() Specification : ALLWAYS FUZE MK II (EMPTY) DRG.NO. ARM 1003 B1 ISSUE 5 DT 2/6/72 SPECN: DTD&P (AIR)/ARM 214 ISSUE NO. 1 DT. 2-8-83 R Estab
4) FUZE T & P 213 MK 5 (M-R) ARDE 2020() Specification : ARDE/SPECN/440 AND 441 R Estab
Category : p
Grade : 1
Size : S
1Ordnance Factory Bolangir

[ENR Registration]
Name Specification Use Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN Description : NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN() Specification : CQA(A) DRG.NO. bw.3.140.039.cb/c, DC-34241 -A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO. Bw.3.140.039 I C Estab
2) ANVIL TO DRG NO 9 0643 Description : ANVIL TO DRG NO 9 0643() Specification : ANVIL TO DRG.NO.9-0643/9- -104/3, DC36309-A, DT.14.7.97. C Estab
3) CAP TO DRG NO 9 0643 Description : CAP TO DRG NO 9 0643() Specification : CAP TO DRG.NO. 9-0643/9- -104/1, DC.34183-A, DT-28.7.87. C Estab
Category : p
Grade : 3
Size : M
1094 VSSP ENGINEERING PRIVATE LIMITED
D/11-A, PHASE IV EXTENSION JEEDIMETLA Rangareddi Telangana
PIN1 : 500055
Phone No. : 9394761823 		AAAAA1234B

Download 		1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL C Nonestab
2) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR E Nonestab
3) SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL[70]() Specification : SUPPLY OF PACKING BOX FOR 10 NOS AS PER DRG NO K 9024 STAR WITH FIRMS MATERIAL E Nonestab
4) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY) C Nonestab
5) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]() Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION C Nonestab
6) AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL[70]() Specification : AMMUNITION BOX AS PER DRG NO PKM 7000 WITH FIRMS MATERIAL E Nonestab
7) CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2[70]() Specification : AS PER DRAWING OF CARRIER BOLT BREECH COMPONENTS DRG NO 6P 11 3 3 DRG NO 62 C 3003 200 D2 C Nonestab
8) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]() Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Kanpur

Name Specification Use Status
1) Mounting 81MM Mortar E 1 General Assembly to Part No AMG 72895 DS CAT No 1015 001480 Drgs Specifications of Sub Assemblies Components as per Annexure No 81MM MOR ODC Annexure 002 for assembly of 81MM Mortar Ordnance[63]() Specification : Mounting, 81MM Mortar E-1 (General Assembly) to Part No. AMG 72895 (DS CAT No. 1015-001480), Drgs, Specifications of Sub Assemblies, Components as per Annexure No. 81MM MOR/ODC/Annexure/002 for assembly of 81MM Mortar Ordnance C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Kanpur

Name Specification Use Status
1) Loading System as per drg no 176 6000 consisting of Rammer Assembly as per drg no 176 6003 and Rammer Tray Assembly as per drg no 176 6004 Drg Specifications of sub assemblies components as per Annexure Sharang ODC Anne 001 Enclosed[65]() Specification : For more details regarding tender visit www.ofbeproc.gov.in C Estab
Category :
Grade : Grade III
Size : S
1095 Sagar Enterprises
A 9, Pavna Industrial Premises, T - 204, MIDC, Bhosari T - 204 MIDC. Pune Maharashtra
PIN1 : 411026
Phone No. : 29525585
GSTIN : 27BNEPS0038J1ZW 		PNEU06480F

Download 		1Ordnance Factory Dehu Road

Name Specification Use Status
1) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG 2A COMPRISING OF 9 COMPONENTS/ ASSEMBLES [62]() Specification : CQA(A) 4928 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BAFFLE PLATE FOR 81MM ILLG. MK-II[63]() Specification : DRG. NO. ARDE 1965 DET 15 PT.NO. ITV 125, DC 37039A DT. 25.01.2006 C Nonestab
2) Container Star for 81mm Illg. MK-II[62]() Specification : SPECN:CQA(A) NO.2345(C) DRG NO ARDE 1965 DET 12 PT NO ITV 122 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) WASHER CUPPED FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA(A) 2321(b) DRG. NO. ARDE-2011 DET.15 C Nonestab
2) MAIN PARA.HOUSING FOR 120MM ILLG.[63]() Specification : DRG.NO. ARDE 2011 DET NO. 19 PARTNO. ITV 149 DC (I) 34732 - A DATED 30-09-1989 METAL STEEL TO SPFCN IS 1079 2009 (REVISION NO. 6)GR EDD OR DD AND SPECN.CQA (A) 2321 (b) DC NO.36952-A DT.16-03-04. C Estab
3) SET OF 8 COMPONENTS FOR SHELL 105MM SMOKE[62]() Specification : DRG. NO. CQA(A) 4921 C Nonestab
4) STAR HOUSING FOR 120MM ILLG.[63]() Specification : DRG. NO. ARDE-2011 DET 13 PT NO. ITV-144 SPECN. NO. CQA(A)2321(b) C Nonestab
5) BODY & BOTTOM FOR FOG SIGNAL[64]() Specification : DRG. NO. OFDR/FOG SIGNAL/37/A1 AMDT NO. 185 DT. 24/5/2011 C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) CUP HALF (ALU) FOR BOMB 81MM ILLG. MK-II[62]() Specification : CUP HALF ASSY. TO DRG. NO. ARDE 2222, PT NO. ITV 257 SHT-1 AND CUP HALF TO DRG NO. ARDE 2222, PT NO. ITV 257 Sht-2 C Nonestab
2) CUP FOR 51 ILLG.[62]() Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1096 Austin Engineering Company Limited
Vill - Patla, Tal - Bhesan, Via Ranpur (Sorath), Hadmatiya, District - Junagadh Gujarat
PIN1 : 362030
Phone No. : 02873-252223
GSTIN : 24AABCA8189N1Z6 		RKTA00811G

Download 		1Heavy Vehicle Factory

Name Specification Use Status
1) Single Row Radial Ball Bearing() As per drawing E Established
2) Needle Roller for Bearing() As per drawing E Established
3) Bearing Roller GPZ() As per drawing E Established
4) Cylindercal Rollers() As per drawing E Established
5) Bearing Double Groove() As per drawing E Established
6) Deep Grove and Angular Contact Ball Bearing() As per drawing E Established
7) Roller() As per drawing E Established
8) Thrust Ball Bearing with Flat Scat() As per drawing E Established
9) BEARING 941/15() DRG.NO.GOST:4060(941/15) C Non Established
10) BEARING 80018() DRG.NO. GOST: 7242 C Non Established
11) BEARING 941/15() DRG.NO. GOST:4060(941/15) C Non Established
Category : P
Grade : I
Size : M
1Engine Factory Avadi

Name Specification Use Status
1) BALL BEARING 6205Z () 60205K GOST 7242-70 C Estab.
2) DEEP GROOVE SINGLE BALL BEARING () 208 C Estab.
3) DOUBLE ROLW SPECIAL ROLLER BEARING () 3608 C Estab.
4) RADIAL CYL ROLLER BEARING () 32208 C Estab.
5) BEARING 92305 M () ND C Estab.
6) BEARING 12302 B1 () ND C Estab.
7) BEARING 210 () ND C Estab.
8) BEARING 25-207 BTI () ND C Estab.
9) BEARING 292208 M () ND C Estab.
10) BEARING 292228 MT () ND C Estab.
11) BEARING 30-92224 MT () ND C Estab.
12) BEARING 42305 M () ND C Estab.
13) BEARING 6-112 L () ND C Estab.
14) BEARING 6-36207 L () ND C Estab.
15) BEARING 6-204 () ND C Estab.
16) BEARING 70-42205DI () ND C Estab.
17) BEARING 92305 M () ND C Estab.
18) DEEP GROOVE S/ROW BALL BEARING 205K () ND C Estab.
Category : P
Grade : II
Size : M
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BEARING part no X 0204610 Description : BEARING part no X 0204610() Specification : BEARING part no X 0204610 (L.F. no.:- 9013110430000) C Estab
Category : dp
Grade : 2
Size : M
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BEARING part no X 0204610 Description : BEARING part no X 0204610() Specification : BEARING part no X 0204610 (L.F. no.:- 9013110430000) C Estab
Category : dp
Grade : 2
Size : M
1Vehicle Factory Jabalpur

Name Specification Use Status
1) LPTA Cyl Roller Bearings JC8005[90]() Specification : Cyl. Roller Bearing (JC 8005) C Estab
Category : p
Grade : Grade III
Size : M
1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) Cage Roller Bearing Description : Cage Roller Bearing() Specification : As per GCF/Drg/Size/specn/IS/BS C Estab
Category : p
Grade : 3
Size : M
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) ROLLER BEARING NJ2210E Description : ROLLER BEARING NJ2210E() Specification : ROLLER BEARING NJ2210E C Estab
2) NEEDLE ROLLER BRG NK90 25 Description : NEEDLE ROLLER BRG NK90 25() Specification : NEEDLE ROLLER BRG. NK90/25 C Estab
3) CYL ROLLER BRG NS 1911 Description : CYL ROLLER BRG NS 1911() Specification : CYL.ROLLER BRG.(NS-1911) C Estab
4) Needle Roller Brg. NK 55/35-X0202410 Description : Needle Roller Brg. NK 55/35-X0202410() Specification : Needle Roller Brg. NK 55/35 DRG./PT. NO. - X0202410 C Estab
Category : p
Grade : 3
Size : M
1097 Saturn Enterprises
G-15, Bajrangbali Industrial Estate, Near Panki, Site-4, Kanpur, Uttar Pradesh
PIN1 : 208022
Phone No. : 8933999444
GSTIN : 09AALPA8171F1ZO 		KNPS02543C

Download 		1Ordnance Equipment Factory

Name Specification Use Status
1) FOUR WAY MILD STEEL JOINT() PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R
2) THREE WAY MILD STEEL JOINT WITH BASE PLATE () PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R
3) THREE WAY ROOF POLE MILD STEEL JOINT () PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015 R
4) Fabrication of Pack with Aluminum Frame(Modified) () AS PER REQUIREMENT & SPECIFICATION R
5) Trade Fabrication of Bag Kit Universal with PV Dope Dyed Fabric OG() AS PER REQUIREMENT & SPECIFICATION R
6) Dees Steel Various () AS PER REQUIREMENT & SPECIFICATION R
7) Fabrication of Capes W.P. OG/Khaki() AS PER REQUIREMENT & SPECIFICATION R
8) Fabrication of End Curtain of TEFS 4M/2M (Army) (Each set consisting of two(2) numbers)() AS PER REQUIREMENT & SPECIFICATION R
9) Fabrication of TEFS 4M Fly Inner() AS PER REQUIREMENT & SPECIFICATION R
10) Fabrication of Net Mosquito R/M Poly. Khaki with Calico Border() AS PER REQUIREMENT & SPECIFICATION R
11) Fabrication of Short PV Dope Dyed Khaki() AS PER REQUIREMENT & SPECIFICATION R
12) Trade Fabrication of Net Mosquito White Poly F/R A/F () AS PER REQUIREMENT & SPECIFICATION R
13) Fabrication of Bag Carrying Rescue() AS PER REQUIREMENT & SPECIFICATION R
14) Fabrication of Carrier Man Pack() AS PER REQUIREMENT & SPECIFICATION R
15) Trade Fabrication of Bag Sleeping MK-4() AS PER REQUIREMENT & SPECIFICATION R
16) Trade Fabrication of Bag Sleeping Offier Camp kit A/F() AS PER REQUIREMENT & SPECIFICATION R
17) Fabrication of Tent Extendable Fly Outer 2M unit() AS PER REQUIREMENT & SPECIFICATION R
18) Fabrication of Synthetic Web Equipment ICK Pouches Ammunition() AS PER REQUIREMENT & SPECIFICATION R
19) Fabrication of Bag Kit Universal(New Pattern) A/F() AS PER REQUIREMENT & SPECIFICATION R
20) Fabrication of Haversack All Rank() AS PER REQUIREMENT & SPECIFICATION R
21) Fabrication of Canopy Body (Tarpaulin)() AS PER REQUIREMENT & SPECIFICATION R
22) Fabrication of Lt. Wt. Pouches Basic() AS PER REQUIREMENT & SPECIFICATION R
23) Fabrication of Ground Sheet Lt. Wt. OG () AS PER REQUIREMENT & SPECIFICATION R
24) Fabrication of Syn Belt Waist (ICK)() AS PER REQUIREMENT & SPECIFICATION R
25) Fabrication of Roll Bedding() AS PER REQUIREMENT & SPECIFICATION R
26) Fabrication of Cover Water Proof 9.1*9.1 Mtr.() AS PER REQUIREMENT & SPECIFICATION R
27) Fabrication of Mattress Kapok MK-2() AS PER REQUIREMENT & SPECIFICATION R
28) Fabrication of Screen Latrine Bag MK-3() AS PER REQUIREMENT & SPECIFICATION R
29) Trade Fabrication of Bag  3 A/L() AS PER REQUIREMENT & SPECIFICATION R
30) Trade Fabrication  of Accessary Bag to DS CAT No. M/84600005 with all fittings() AS PER REQUIREMENT & SPECIFICATION R
31) Fabrication of fabric piece Embedded with Nylon/Poly Propline Beads for  Bag Carring Rescue() AS PER REQUIREMENT & SPECIFICATION R
32) Eyeleting Operation of Tent 4M Outer through Trade Assistance() AS PER REQUIREMENT & SPECIFICATION R
33) Fabrication of Tent Arctic Large() AS PER REQUIREMENT & SPECIFICATION R
34) CLIP IRON (FOR TENT EXTENDABLE)() CQA(GS)/US/467(b) (5986/PK DT. 8.9.2003) GALVANIZED. R
35) PIN TENT CARBON STEEL SMALL 8340-000508() AS PER REQUIREMENT & SPECIFICATION R Non Established
36) D RING VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
37) 8340-001117, FOUR WAY JOINT FOR TENT EXTENDABLE FRAME SUPPORTED () AS PER REQUIREMENT & SPECIFICATION R Non Established
38) 8340-001118, THREE WAY JOINT FOR ROOF POLE FOR TENT EXTENDABLE FRAME SUPPORTED() AS PER REQUIREMENT & SPECIFICATION R Non Established
39) 8340-01116, THREE WAY JOINT WITH BASE PLATE FOR TENT EXTANDABLE FRAME SUPPORTED() AS PER REQUIREMENT & SPECIFICATION R Non Established
40) LID CAP TANK MULE MK-4() AS PER REQUIREMENT & SPECIFICATION R Non Established
41) LINK (40X19X6MM DIA)() AS PER REQUIREMENT & SPECIFICATION R Non Established
42) LOOP PIN() AS PER REQUIREMENT & SPECIFICATION R Non Established
43) ROOF POLE WITH THREE WAY JOINT (FOR TENT EXTENDABLE) () AS PER REQUIREMENT & SPECIFICATION R Non Established
44) U PIN() AS PER REQUIREMENT & SPECIFICATION R Non Established
45) CHAIN FOR POLE DOOR ALLUMINIUM ALLOY. DRG NO. SK-1000() AS PER REQUIREMENT & SPECIFICATION R Non Established
46) CHAIN FOR POLE STANDING ALUMINIUM ALLOY. DRG.NO. SK-1001() AS PER REQUIREMENT & SPECIFICATION R Non Established
47) CLIP END STRAP BRASS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
48) HING COMPLETE ASSEMBLED WITH LINK AS PERDRG.NO.SE-232 DET.5() AS PER REQUIREMENT & SPECIFICATION R Non Established
49) HING WITH LINK COMPLETE ASSEMBLED AS PERDRG.NO.SE-221 OF SHEET 2/2 DET 6() AS PER REQUIREMENT & SPECIFICATION R Non Established
50) HINGE COMPLETE ASSEMBLED WITH LINK AS PER DRG. NO. SE 113 DET 16 & 17 FOR CARRIER 6 A/L() AS PER REQUIREMENT & SPECIFICATION R Non Established
51) PIN TENT ANGLE IRON MED.MK-2() AS PER REQUIREMENT & SPECIFICATION R Non Established
52) PIN TENT ANGLE IRON MED.MK-II() AS PER REQUIREMENT & SPECIFICATION R Non Established
53) RUNNER() AS PER REQUIREMENT & SPECIFICATION R Non Established
54) RUNNER ALUMINIUM FOR TENT() AS PER REQUIREMENT & SPECIFICATION R Non Established
55) RUNNER BRASS() AS PER REQUIREMENT & SPECIFICATION R Non Established
56) SPRING CLIP COMPLETE ASSEMBLED WITH LINKWITHOUT STRAP FOR BOX C -18() AS PER REQUIREMENT & SPECIFICATION R Non Established
57) TENT DEES IRON 25MM X20MM X4MM() AS PER REQUIREMENT & SPECIFICATION R Non Established
58) TENT PIN ANGLE IRON MEDIUM() AS PER REQUIREMENT & SPECIFICATION R Non Established
59) WASHERS STEELS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
60) WASHERS COPPER VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
61) WASHERS BRASS VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
62) HEATER SPACE OIL BURNING-CONTROL VALVE BODY() AS PER REQUIREMENT & SPECIFICATION R Non Established
63) LOOP PIN() AS PER REQUIREMENT & SPECIFICATION R Non Established
64) BUCKLES BRASS OR ATTACHMENTS QR OR RINGS OR DEES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
65) BUCKLES IRON VARIOUS() AS PER REQUIREMENT & SPECIFICATION R Non Established
66) CHIMNEY SEGMENT OR ELBOW() AS PER REQUIREMENT & SPECIFICATION R Non Established
67) WING NUT WITH BRACKET() AS PER REQUIREMENT & SPECIFICATION R Non Established
68) HANDLE CLIP FOR BOX C-18() AS PER REQUIREMENT & SPECIFICATION R Non Established
69) BURNER FOR H.S.O.B. AS PER DRG. NO. 5881/P SHEET NO 6() AS PER REQUIREMENT & SPECIFICATION R Non Established
Category : P
Grade : III
Size : S
1Ordnance Parachute Factory

Name Specification Use Status
1) Fabrication of Coat Combat Disruptive with Det. Lining Army Logo() As per Specification R Not Estab.
2) Fabrication of Trouser Combat Poly Disruptive with Army Logo() As per Specification R Not Estab.
3) Fabrication of Jacket Combat Poly Disruptive with Army Logo() As per Specification R Not Estab.
4) Fabrication of Trouser and Shirt Plain Weave PV DDOG() As per Specification R Not Estab.
5) Fabrication of END Curtain of TEFS 4M/2M (Army)() As per Specification R Not Estab.
6) Fabrication of TEFS 2 & 4M Fly Inner() As per Specification R Not Estab.
7) Fabrication of Tent Extendable Fly outer 2M & 4M Unit() As per Specification R Not Estab.
Category : P
Grade : III
Size : S
1098 MITTAL APPLIANCES LIMITED
UNIT NO. 13, 1ST FLOOR, SWASTIC INDUSTRIAL ESTATE, 178, VIDYANAGARI MARG, KALINA MUMBAI MAHARASHTRA
PIN1 : 400098
Phone No. : 7770895777
GSTIN : 23AABCM1903A1ZF 		BPLM04214A

Download 		1Ordnance Factory Dehu Road

Name Specification Use Status
1) CARTRIDGE CASE FOR 16 MM RED () DRG.NO. ARDE 1878 DET 1PT. NO. IQW151 SPECN.NO.CQA (A) 3811 (h) C Not Estab.
2) CARTRIDGE CASE FOR 16 MM GREEN () DRG.NO. ARDE 1878 DET 1 PT.NO.IQW-151 SPECN.NO.CQA (A) 3811 (h) C Not Estab.
3) CARTRIDGE CASE FOR 16 MM WHITE () DRG.NO. ARDE 1878 DET 1 PT.NO.IQW-151 SPECN.NO.CQA (A) 3811 (h) C Not Estab.
4) ADAPTER NOSE FOR 81MM INERT/FLASH () DRG.NO. DD(L)11855. PART TV-44 C Not Estab.
5) DELAY CASING EMPTY 14.5MM 3 & 6 SEC() DRG.NO.04-749-130226-02. IE. SPECN .04-749-0021-008 C Not Estab.
6) CARRIER AMMUNITION 16A() DRG NO. ARDE 2224 SHEET NO. 2 PT NO ISV 550A SPECN NO IA 1169 (n) C Not Estab.
7) ADAPTER NOSE FOR 81MM ILLG.() DRG NO. ARDE 1965 DET 4 PT NO ITV 114 SPECN CQA(A) 2345 (C) C Not Estab.
8) BAFFLE PLATE FOR 81MM ILLG. MK-II() DRG. NO. ARDE 1965, DET 15, PT NO. ITV 125 C Not Estab.
9) BASE PLATE FOR BOMB 81MM ILLG.() DRG. NO. ARDE 1965 DET 13 PT NO ITV 123 SPECN CQA(A) 2345 (C) C Not Estab.
10) CONTAINER STAR FOR BOMB 81MM ILLG.() DRG. NO. ARDE 1965 DET 12 PT NO ITV 122 SPECN CQA(A) NO.2345(C) C Not Estab.
11) CUP HALF ALLUM FOR BOMB 81MM ILLG.() DRG. NO. ARDE 2222, PT NO. ITV 257 Sht-1 & Sht-2 C Not Estab.
12) CONTAINER WITH DISC FOR BOMB 81 MM ILLG. MK-II() DRG. NO. CIA/AMMN/811, PT.NO.ITV 6A & PT. NO. ITV 24 SPECN. NO.CQA(A) 2303 (F) C Not Estab.
13) CUP FOR 51MM ILLG. () DRG. NO. ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d) C Not Estab.
14) DELAY TUBE FOR 51MM ILLG. () DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d) C Not Estab.
15) WASHER COPPER FOR 105 MM ILLG.() DRG.NO. D 6 P-A-180/1/3,PT NO.ISX 344 C Not Estab.
16) SET OF 8 COMPONENTS FOR SHELL 105MM IFG SMOKE BE 3A/IFG COLOR SMOKE BE 3A() CQA(A) 4921 C Not Estab.
17) SET OF 8 COMPONENTS FOR SHELL 105MM COLOR SMOKE ORANGE() CQA(A) 2346(c) C Not Estab.
18) SET OF COMPONENTS FOR SHELL 105 MM IFG ILLG. 2A COMPRISING OF 9 COMPONENTS() CQA(A) 4928 C Not Estab.
19) HALF CUP FOR 120MM ILLG.() DRG.NO.CIA. AMN/2158 PART NO.ISV1740 C Not Estab.
20) STAR HOUSING FOR 120MM ILLG.() DRG. NO. ARDE 2011, DET 13 PT.NO. ITV-144 SPCEN.NO. CQA(A)2321 (b) C Not Estab.
21) WASHER (BRASS) FOR FUZE T&P DA NO 213 P MK5 (M2) (FILLED)() DRG.NO. S5/7806/F/621 PART NO QX 1247 C Not Estab.
22) BODY & BOTTOM FOR FOG SIGNAL() DRG. NO. OFDR/FOG SIGNAL/37/A1 AMDT NO. 185 DT. 24/5/2011 C Not Estab.
23) TIN ZINC WASHER 12.7 OD FOR 16 MM () WASHER (80/20 TIN ZINC ALLOY) O.D.12.7 MM ,I.D.9.52 MM AND THICKNESS 0.508 MM. DRG. NO. OFDR/MF-2/R5 C Not Estab.
24) TIN ZINC WASHER 21.08 FOR 1"G/IULL() WASHER STAR (80/20 TIN ZINC ALLOY): O.D. 21.08 0.13MM; I.D. 6.35; THICKNESS 0.51MM DRG.NO.DD(L)15976 PART NO.QW 7AF C Not Estab.
Category : P
Grade : I
Size : S
1Metal and Steel Factory

Name Specification Use Status
1) BRASS PIG 60:40,COMPOSITION Cu: 56.5 - 62% ,Pb : 1.00% MAX. Fe % : O.10 MAX,Sb% : O.02 MAX,Zn % : REMINDER, TOTAL IMPURITIES % : O.50 MAX (EXCLUDING Cu % ,Pb % & Zn % ) AS PER SCOPE OF SUPPLY.[07]() Specification : BRASS PIG 60:40,COMPOSITION Cu: 56.5 - 62% ,Pb : 1.00% MAX. Fe % : O.10 MAX,Sb% : O.02 MAX,Zn % : REMINDER, TOTAL IMPURITIES % : O.50 MAX (EXCLUDING Cu % ,Pb % & Zn % ) AS PER SCOPE OF SUPPLY. C Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE() Specification : JSS-9535-02-2008 Rev.3 R Estab
2) BRASS STRIP 0.47MM TH. X 35.6MM WIDE() Specification : JSS-9535-02-2008 REV. 3 R Estab
Category : p
Grade : 3
Size : S
1099 SHAKUN INDUSTRIES
PLOT NO 44/1 GUT NO 248 GHANEGAON MIDC WALUJ MIDC WALUJ AURANGABAD Maharashtra
PIN1 : 431136
Phone No. : 2984338
GSTIN : 27AFFPM5822A1ZS 		AFFPM5822A

Download 		1Ordnance Factory Bhusawal

Name Specification Use Status
1) BOTTOM FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
2) TOP FRAME FOR CARRIER 13A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
3) ENGAGING PLATE FOR BOXH2A[99]() Specification : ENGAGING PLATE FOR BOX H2A AS PER DRG.NO.OFB/C/718. E Nonestab
4) PIECE PACKING FOR BOX SM 601[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION E Nonestab
5) CATCH PLATE WITHOUT ASSLY. OF BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
6) ASSEMBLE SECURING PLATE/1545 BOX H2A[99]() Specification : AS PER DRG./SPECIFICATION E Nonestab
7) ANGLE PLATE VERTICAL AS PER DRG. NO. OFBH-CA-13-C-1969[99]() Specification : ANGLE PLATE VERTICAL FOR CARRIER 13A/16A AS PER DRG NO. OFBH-CA-13-C-1969 E Nonestab
8) HINGE WITH HINGE PIN ASSY FOR BOX H2A[99]() Specification : HINGE WITH HINGE PIN ASSEMBLY FOR BOX H2A AS PER DRAWING NO. 0FBH-H2A-C-2067 E Nonestab
9) PIECE PACKING `A'[99]() Specification : PIECE PAKING A AS PER REF. PART NO. ISV 1820 E Nonestab
10) PIECE PACKING 'B'[99]() Specification : AS PER DRG NO. OFB/C/1541 E Nonestab
Category :
Grade : Grade III
Size : SS
1Ordnance Factory Bhusawal

Name Specification Use Status
1) 9911846499 CATCH FOR BOX H5A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
2) 9911842378 BRACKET TOP FOR BOX C 51A[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
3) 9911842882 CHANNEL FOR BOX C 53A[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
4) 9911846587 SMALLER BRACKET FOR BOX SM 642 C[07]() Specification : AS PER OFBH DRG AND SPECIFICATION R Nonestab
5) 9911842185 HANDLE CLIP DRG NO OFB C 1406[99]() Specification : AS PER SPECIFICATION C Nonestab
6) 9911846500 ENGAGING PLATE FOR BOX H5A[99]() Specification : AS PER SPECIFICATION R Nonestab
7) 9911846236 CATCH WITH PLATE ASSEMBLY[99]() Specification : AS PER SPECIFICATION R Nonestab
8) 9911839007 CATCH ASSY OFBDRGNO OFB C 1195[99]() Specification : AS PER SPECIFICATION R Nonestab
9) 9911842879 BRACKET B 2 FOR BOX C 53A[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
10) 911847059 SUPPORTING BRACKET BOX SM 651[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
11) 9911847060 SMALLER BRACKET FOR SM 651J[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
12) 9911844893 RACK NO 21 FOR RIFLE 5 56MM[99]() Specification : AS PER OFBH SPECIFICATION P Nonestab
13) 9911846246 SMALLER BRACKET FOR BOX SM 171[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
14) 9911847062 BIGGER PACKING PIECE SM 651J[99]() Specification : AS PER OFBH SPECIFICATION C Nonestab
15) 9911844889 RACK NO 20 FOR RIFLE 5 56MM[99]() Specification : AS PER OFBH SPECIFICATION P Nonestab
16) 9911846333 CATCH AS PER DRG NO OFB C 1942[99]() Specification : AS PER OFBH REQUIREMENT C Nonestab
17) 9911846343 HANDLE FOR CARRIER 13A[99]() Specification : AS PER OFBH REQUIREMENT C Nonestab
Category :
Grade : Grade III
Size : SS
1Ordnance Factory Bhusawal

Name Specification Use Status
1) ANGLE SUPPORT FOR STEEL PACKAGE[07]() Specification : ANGLE SUPPORT FOR STEEL PACKAGE R Nonestab
2) LATCH ASSY FOR 120MM ARJRN AMM[07]() Specification : LATCH ASSY FOR 120MM ARJRN AMM R Nonestab
Category :
Grade : Grade III
Size : SS
1Ordnance Factory Bhusawal

Name Specification Use Status
1) HINGE AS PER DRG NO. OFB/C/1410[07]() Specification : Drg.No. OFB/C/1410-A E Nonestab
2) HINGE AS PER DRG. NO. OFB/C/1565[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION E Nonestab
3) PLATE HOOK AS PER DRG. NO. OFB/C/1560[07]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
4) BOTTOM FOR BOX H5A[99]() Specification : As per O.F.Bhusawal Drawing/Specification C Nonestab
5) VARIOUS SHEET METAL COMPONENTS REQUIRED FOR BOX C-53A, BOX C-44A & OTHER BOXES[99]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
6) HANDLE AS PER DRG. NO. OFB/C/1757[99]() Specification : AS PER DRG./SPECIFICATION C Nonestab
7) HINGE PIN DRG. NO. OFB/C/700[07]() Specification : HINGE PIN DRG. NO. OFB/C/700 R Nonestab
8) ASSEMBLED SECURING PLATE 1545[07]() Specification : ASSEMBLES SECURING PLATE 1545 R Nonestab
Category :
Grade : Grade III
Size : SS
1Ordnance Factory Bhusawal

Name Specification Use Status
1) ALL BRACKETS FOR BOX -C-51A &C-52-A[99]() Specification : AS PER O.F.BHUSAWAL DRAWING/SPECIFICATION C Nonestab
2) CATCH FOR BOX H5A[07]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
3) BIGGER BRACKET FOR BOX SM 171K[07]() Specification : AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION C Nonestab
4) CATCH - AS PER DRG. NO. OFB/C/1561[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
5) CATCH FOR BOX SM 171K, 651J, 642[07]() Specification : AS PER DRG./SPECIFICATION C Nonestab
6) CATCH PLATE (WITH ASSLY) FOR BOX H2A - AS PER DRG. NO. OFB/C/717[07]() Specification : AS PER DRAWING/SPECIFICATION. C Nonestab
7) BRACKET MIDDLE FOR BOX C-51A AND C52A[07]() Specification : BRACKET MIDDLE FOR BOX C-51A & BOX C-52A AS PER DRG.NO.OFB/C/1363,DET-12 & OFB/C/1364,DET-10 REF.DRG.NO.ISV-2033 DC 36629-A DATED 06/01/2000. E Nonestab
8) BRACKET CROSS FOR BOX C51A[07]() Specification : AS PER OFBH SPECIFICATION C Nonestab
9) BRACKET TOP FOR BOX C 51-A[07]() Specification : BRACKET TOP FOR BOX C 51-A R Nonestab
Category :
Grade : Grade III
Size : SS
1100 Tiki Tar Industries Baroda Limited
8th Floor, Neptune Tower, Productivity Road Vadodara - 390 007. Gujarat
PIN1 : 390007
Phone No. : 2337862
GSTIN : 24AADCT8382Q1ZK 		AADCT8382Q

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) BITUMEN SPECIAL AMMN.[10]() Specification : IND/ME/136 (b) R Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513 Description : PITCH COAL TAR SOFT MEDIUM ITEM CODE 1020610513() Specification : PITCH COAL TAR SOFT-MEDIUM TYPE TO SPECN: JSS-5610-02:2014 (REV. NO. 4) DC NO. 5245-ME DT 18/06/2014 R Estab
Category : p
Grade : 3
Size : S

Copyright © 2025 - OFB