1) READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004[00]()
Specification : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004
R
Nonestab
2) PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING[00]()
Specification : READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2004 (FIFTH REV) AMENDMENT NO.1 1995 CONFORMING TO IS:138-1992 (THIRD REV) MAKE ASIAN,NEROLACK,BERGER IS ACCEPTABLE.
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PAINT READYMIXED(SIGNAL RED)AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE
Description : PAINT READYMIXED(SIGNAL RED)AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE()
Specification : FOR PACKAGE & PETROL CONTAINERS ISC-537 OF IS:5-2007 (SIXTH REVISION) AMMENDMENT NO.1,SPECN.IS-138-1992 (3RD.REV.) MODE OF APPLICATION -STENCILLING AS APPLICABLE FOR DEFENCE USE (TO BE SUPPLIED IN 500 ML PACK).
R
Estab
2) PAINT R.MIXED MARKING GOLDEN YELLOW ISC-356 OF IS 5-2007 Rev-6 TO SPECN:IS-138-1992(
Description : PAINT R.MIXED MARKING GOLDEN YELLOW ISC-356 OF IS 5-2007 Rev-6 TO SPECN:IS-138-1992(()
Specification : PAINT R.MIXED MARKING GOLDEN YELLOW ISC-356 OF IS 5-2007 Rev-6 TO SPECN:IS-138-1992 (3RD REV.) FOR PACKAGES, MODE OF APPLICATION-STENCILLING [TO BE SUPPLIED IN 500 ML PACK]
R
Estab
3) PAINT READYMIXED BLACK,AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE TO SPECN
Description : PAINT READYMIXED BLACK,AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE TO SPECN()
Specification : PAINT READY MIXED BLACK,AIR DRYING MARKING GLOSS VALUE 31 TO 50 AT 45 DEGREE TO SPECN:IS-138- 1992 (3RD REV.) FOR DEFENCE USE, MODE OF APPLICATION: STENCILLING (TO BE SUPPLIED IN 500 ML PACK).
Specification : IS:231, IS:170, IS:537 AND JSS:6810-98
R
Estab
4) PAINT RM STEN SGF GOLDEN YELLOW()
Specification : IS 138-1992 3RD REV.WITH A.NO.1
R
Estab
5) PAINT SYN.ENAMEL LIGHT GREY()
Specification : IS 168 : 1993
R
Estab
6) PAINT RMADB SGF MIDDLE BUFF ISC 359()
Specification : IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90
R
Estab
7) PAINT RM MKG STEN BLACK AMMN()
Specification : IS-138-1992 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE.
R
Estab
8) PAINT RM AMMN ADSGFS WHITE()
Specification : IS:138-1992 (3RD REVISION) AS APPLICABLE FOR DEFENCE USE.SPECIAL REQUIREMENT
Specification : IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)
R
Estab
13) PAINT RFU FINI AMN ADMFB OLIV GREEN()
Specification : IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90
R
Estab
14) PAINT RM RED OXIDE ZINC CHROME.()
Specification : JSS 8010-68 : 2008 REV.NO.2 DC 3930-ME
Specification : IS:231, IS:170, IS:537 AND JSS:6810-98
R
Estab
4) PAINT RM STEN SGF GOLDEN YELLOW()
Specification : IS 138-1992 3RD REV.WITH A.NO.1
R
Estab
5) PAINT SYN.ENAMEL LIGHT GREY()
Specification : IS 168 : 1993
R
Estab
6) PAINT RMADB SGF MIDDLE BUFF ISC 359()
Specification : IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90
R
Estab
7) PAINT RM MKG STEN BLACK AMMN()
Specification : IS-138-1992 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE.
R
Estab
8) PAINT RM AMMN ADSGFS WHITE()
Specification : IS:138-1992 (3RD REVISION) AS APPLICABLE FOR DEFENCE USE.SPECIAL REQUIREMENT
Specification : IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)
R
Estab
13) PAINT RFU FINI AMN ADMFB OLIV GREEN()
Specification : IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90
R
Estab
14) PAINT RM RED OXIDE ZINC CHROME.()
Specification : JSS 8010-68 : 2008 REV.NO.2 DC 3930-ME
1) CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (A 9900)(PACKING BOX FOR 12.7mm AD GUN)[70]()
Specification : AS PER DRG TO CASE No.: 1 TO 12.7mm A.D.GUN TO DRG.No.: 6P49CdCb
D.S.CAT.No.: 5140-000189, D.C.No.:26103-SA, DATED:11/11/2005
FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.
(A 9900)(PACKING BOX FOR 12.7mm AD GUN)
C
Estab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) PACKING BOX FOR SPC CHARGE FOR RZ-61()
DRAWING NO.HEMRL/SRP/PHR/05.5 FOUR SHEETS
E
Not Estab
2) PACKING FOX FOR AKASH BOOSTER()
AS PER TSQD NO.DRDL/TSQD/AK/022 REV2 AND DRAWING NO.HEMRL/SRP/AK/BST/CP/04.12(PAGE NO.143)
E
Not Estab
3) WOODEN PALLET()
DRG.NO.4085565 AND PALLET COVER TO DRG. NO.4085566 WITH D.C.NO.35637-A TO ALL COMPONENTS & CONNECTED DRAWINGS
1) CASE HEMK-1 A/L WOOD (SER ) for pkg. 25 Kg. RDX/TNT 60/40[10]()
Specification : DRG. NO. HEF/5038 & TIMBER MATERIAL TO SPECN. HEF/IO/TC&N/10/DT.16/10/2006
R
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PIECE PACKING SIDE 410 X 150 X 6 MM TH (5 PLY) ITEM NO 8()
PT NO ISV-465 GA DRG NO. CQA(A)/AMN /2543
C
E
2) PIECE PACKING END()
PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Det-2 DC.35099-A Dt.31-05-91
C
E
3) PIECE PACKING BOTTOM "B" 448 X 165X 6 MM TH (5 PLY) ITEM NO 7 ()
PT NO ISV-465 GA DRG NO CQA (A) /AMN/2543. SHEET-1 DC-36814-A DT.15.02.02
C
E
4) PIECE PACKING TOP ()
PT NO ISV-240 SA DRG NO CQA(A)/AMN/2543,DET-1.DC-35099-A DT.31-05-91
C
E
5) PARTITION 410 X 45 X 3 MM TH (5 PLY) ITEM NO 9()
PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02
C
E
6) PIECE PACKING BOTTOM "A" ()
PT NO ISV-242 SA DRG NO CQA (A)/AMN/2543. Det-4.DC NO-35099-A DT.31-05-91
C
E
7) PIECE PACKING SIDE 410 X 150 X 6 MM TH (5 PLY) ITEM NO 8()
PT NO ISV-465 GA DRG NO. CQA(A)/AMN /2543
C
E
8) PIECE PACKING END()
PT NO ISV-241 SA DRG NO CQA(A)/AMN/2543.Det-2 DC.35099-A Dt.31-05-91
C
E
9) PIECE PACKING BOTTOM "B" 448 X 165X 6 MM TH (5 PLY) ITEM NO 7 ()
PT NO ISV-465 GA DRG NO CQA (A) /AMN/2543. SHEET-1 DC-36814-A DT.15.02.02
C
E
10) PIECE PACKING TOP ()
PT NO ISV-240 SA DRG NO CQA(A)/AMN/2543,DET-1.DC-35099-A DT.31-05-91
C
E
11) PARTITION 410 X 45 X 3 MM TH (5 PLY) ITEM NO 9()
PT NO ISV-465 GA DESIGNER REF CQA/AMN/2543 SHEET-1 DC NO.36814-A DT.15-02-02
C
E
12) PIECE PACKING BOTTOM "A" ()
PT NO ISV-242 SA DRG NO CQA (A)/AMN/2543. Det-4.DC NO-35099-A DT.31-05-91
C
E
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PIECE PACKING BOTTOM "B" 448 X 165X 6 MM TH (5 PLY) ITEM NO 7 [64]()
Specification : PT. NO. ISV-465 GA DESIGNER REF NO: CQA(A)/AMN/2543, SHEET-1 DC-36814-A DT. 15.02.02.
C
Estab
Category : DDP,DP
Grade : II
Size :
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Wooden Packing Crate for 100/120 Kg Aerial Bombs()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) PACKING BOXES & DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) WOODEN REELS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
2) PLYWOOD REELS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
3) WOODEN CABLE DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
4) PLYWOOD BOXES & DRUMS()
AS PER RELEVANT SUPPLY ORDER
R
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS[14]()
Specification : AMMN.CONTAINER BOX M 41A (WOOD) AND PACKING FITMENTS TO DRG.PT.NO. ISV 587 A, DC.37127-A DT.30.07.07.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BOX UNIT LOAD FOR 155 MM SHELL M107 1465000220[14]()
Specification : DRG.NO.3058086, WITH LATEST DC(I) 36820-A, DT.16.03.2002
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE()
OFN/BMCS/M-92/WOODEN CRATE
C
Estab.
Category : DDP
Grade : II
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 407 MM X 457 MM X 2286 MM[21]()
Specification : IS:3071-1981 STYLE NO.5 CLASS 'A' (FROM CHIR WOOD)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SISSO HARD WOOD ( NON CONIFEROUS) SCANTLING GR.-I. SIZE-45 MM SQUARE X 1.5 METRS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) CRATE WOOD PACKING SIZE (INTERNAL) 74 CMX 66 CM X 64 CM. FOR SADDLE PA UNIVERSAL[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CASE WOOD PACKING SIZE 381X228X304MM[21]()
Specification : IND/GS/515(f)(3255/PK)
R
Estab
2) CRATE WOOD PACKING CLASS 'A' STYLE 6. SIZE- 6.60 CM X 6.60 CM X 3.30 CM.[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFTWOOD (CONIFEROUS) SLEEPER GR. I SPECIES CHIR/FIR SIZE 125MM X 200MM & UP X 2.44 MTR. & [21]()
Specification : IS: 190-1974 III REVISIOV & SUPP. SHUDULE CQA/SS/309
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 407 MM X 457 MM X 2286 MM[21]()
Specification : IS:3071-1981 STYLE NO.5 CLASS 'A' (FROM CHIR WOOD)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CASE WOOD PACKING INT. SIZE 30 CM X 30 CM X 30 CM[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) CASE WOOD PACKING INTERNAL SIZE 45 CM X 30 CM X 30 CM .[21]()
Specification : IS :1503 -1974 STYLE 3 (b)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) CRATE WOOD PACKING INTERNAL SIZE 62 CM.HX 54.5 CM L X 54.5 CM W AS PER OEF DRG. NO. SK-1166 & IS:3071-1981 CLASS[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
2) CRATE WOOD STYLE NO.5 CLASS B INTERNAL SIZE 50 CM WIDTH X 60 CM LENGTH X 57.50 CM HEIGHT.[21]()
Specification : SPECN.NO. IS:3071-1981
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFT WOOD PLANK/SLEEPER OF VARIOUS GRADES & DIMENSIONS [21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER BEJASAL FOR BEACON BANDEROL SET ARTY B (FOR DEMI BANDEROL STAFF WOOD). SIZE-40 MM SQUARE X 1300 MM LONG[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) WOODEN CRATE/CRATE WOOD PACKING VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
3) TIMBER SOFTWOOD CONIFEROUS CHIR FIR PLANK GR I SIZE 35 MM X 200 MM[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) TIMBER HARDWOOD NON CONIFEROUS PLANT GR 1 SISOO BIJASAL SAL 38 MM X 178 MM X 1 52 MTR[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 6584113903 PACKING BOX WOODEN[65]()
Specification : PACKING BOX WOODEN AS PER ARDE DRAWING NUMBER 9759,DETL NO.3 SHEET NO.2
C
Nonestab
3) 2270528358 PLY WOOD 8 MM[22]()
Specification : IS: 303-1989
R
Nonestab
4) 2255540403 TIMBER N C SIZE 60 X 130MM[22]()
Specification : IND/ME/883 (F) (PROV)
R
Nonestab
5) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]()
Specification : IND/ME/883(F)(PROV)
R
Estab
6) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
7) 2255406390 TIMBER N C SIZE[22]()
Specification : IND/ME/883(F)(PROV)
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]()
Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002.
R
Nonestab
2) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]()
Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
3) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270441000 PLY WOOD 3 MM CWR[22]()
Specification : PLYWOOD FOR GENERAL PURPOSES MR GRADE TYPE AB SIZE 2.40 M X 1.20 M X 3 MM THICK (3 PLY) TO SPECN. IS: 303-1989, THIRD REV., AMDT. 2, REAFFIRMED 1998
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2270353012 PLY WOOD 3 MM BWR BB[22]()
Specification : PLYWOOD TYPE BB BWR GRADE TO SPECN. IS: 303 - 1989,SUPPLEMENTARY SCHEDULE CIGS/SS/37 (C) WITH AMENDMENT NO 1 TO 4 CATALOGUE NO H3/5530 - 000036,SIZE:- 1.20 M X 1.20 M X 3 MM -3 PLY
R
Nonestab
2) 2270460637 PLY WOOD 12 MM MR AA[22]()
Specification : PLY WOOD GENERAL PURPOSE TO GRADE MR TYPE AA TO SPECN.IS:303-1989 WITH AMENDMENT NO.2,SIZE - 1.20 M X 1.20 M X 12 MM TH.9 PLY.
R
Nonestab
3) 2255058168 TIMBER MANGO[22]()
Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.
CRATE WOOD 12-A TO DRG.PT.NO. ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948 (a,k) DC (I) 36868-A, AIDE MEMOIRE W/4
C
NOT ESTABLISHED
3) CATCH LOCK ASSY DRG NO. IA-1053 4 CO (9911358061)()
CATCH LOCK ASSY AS PER DRG NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP
C
NOT ESTABLISHED
4) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)()
AMMUNITION CONTAINER CARRIER-4A/L (STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169 (n) DC NO.35576-A, AIDE MEMOIRE P/11. AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO DRG. PT NO. ISV-336A DC(I) NO 33739-A DT.30/3/85 TO SPEC
AMMN. CONTAINER BOX C 55A (PLYWOOD) FOR AMMN. CONT. ASSY.173A TO DRG.PART NO. ISV 626A DC 37283-A DT. 30/6/2011 REFER WITH DRG.PART NO. ISV.557 GA. DC 37283-A DT 30/6/2011
BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948 (ak) DC-36868-A, AIDE MEMOIRE W/4
C
NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BOX COMPLETE ROUND PART NO 522282 LF 9911358479
Description : BOX COMPLETE ROUND PART NO 522282 LF 9911358479()
Specification : BOX COMPLETE/ROUND PART NO.5227282.
E
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.-O.F.KHAMARIA[99]()
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR SPECIAL METAL CONTAINER[65]()
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
2) WOODEN BOX FOR BPC 4W 20[65]()
Specification : WOODEN BOX FOR PROP BPC (4W-20) AS PER DRAWING ATTACHED SPECIFICATION –DRG.NO.-NAI(J) 245
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX F2A L F 9911356419
Description : AMMUNITION CONTAINER BOX F2A L F 9911356419()
Specification : AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALP
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]()
Specification : DRG.NO. 155-1210
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C
Description : Wooden Packing Box for Propulsion Unit as per Drg No FS2436 C()
Specification : Wooden Packing Box for Propulsion Unit as per Drg. No. FS-2436 C
R
Estab
2) Wooden Packing Box for Warhead as per Drg No FS 2435 C
Description : Wooden Packing Box for Warhead as per Drg No FS 2435 C()
Specification : Wooden Packing Box for Warhead as per Drg. No. FS-2435 C
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) PACKING BOX SPTA FOR TPDK1 LF 9927075323[99]()
Specification : PACKING BOX (SPTA) TO DRG NO. T01/MA/4.162.236/14M2.
C
Nonestab
2) PACKING BOX LF 9927075325[99]()
Specification : PACKING BOX TO DRG NO.B-23/MA/4267018/12 M3
Specification : JSS 9535-2-FEB.82 WITH AMENEMENT NO.1
R
Nonestab
19) BRASS STRIP 36MM WIDE X 0.76MM THIK[07]()
Specification : JSS-9535 2(FEB 82) WITH AMENDMENT NO 1.
R
Nonestab
20) BRASS STRIP 64MM WIDE X 0.81MM THIK[07]()
Specification : JSS-9535-02- 2008 REV 3
R
Nonestab
21) BRASS STRIP 27MM WIDE X 0.63MM THIK[07]()
Specification : JSS-9535 2FEB 82
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 PLUS 20 MM FOR MG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076450584[60]()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN. EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 4850 + 20MM FOR MG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A' 6076450584
C
Nonestab
2) ALUMINIUM ALLOY AL ZN 4 5 MG 1F 35 DIN 1725 BY 1 SPECN EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 PLUS 20MM FOR RG AS PER DRG NO IM0584 AND SCOPE OF SUPPLY AS PER ANNEXURE A 6076451584[60]()
Specification : ALUMINIUM ALLOY AL ZN 4, 5 MG 1F 35 DIN 1725/1 SPECN.EXTRUDED HOLLOW PROFILE IN THE LENGTH OF 3870 +20MM FOR RG AS PER DRG. NO. IM0584 & SCOPE OF SUPPLY AS PER ANNEXURE 'A'
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALU ALLOY ROD 26.50MM IS733 24345WP (0611505027)()
ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-412 Mpa MIN.ELON
R
NOT ESTABLISHED
2) ALU ALLOY ROD 31.75MM IS733 64430 W (0611503032)()
ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 W CONDITION
R
NOT ESTABLISHED
3) ALU ALLOY ROD 65MM IS733 GR24345 WP (0611503065)()
ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION WP
R
NOT ESTABLISHED
4) ALU ALLOY ROD 6.50 MM IS:733 24345 (0611500007)()
ALUMINIUM ALLOY ROD 6.50 +/- 0.05 MM DIA IN ST. LENGTH OF 2.5 TO 3 MTRS TO SPECN:-IS-733-1983 REAFFIRMED 2006 (THIRD REVISION) DESIGN 24345 CONDITION : W
R
NOT ESTABLISHED
5) LEAD SHEET 915 X 3 MM IS:405-1992 (0800520003)()
LEAD SHEET 915 MM WIDE X 3 MM THICK IN ROLLED CONDITION IN LENGTH OF 5 MTR MINIMUM TO SPECIFICATION IS:405 (PT. II-1992)
ALUMINIUM ALLOY SHEET SIZE 1200 MM X 2400 MM X 2 MM THICK TO SPECN:IS-737-1986, ( REAFFIRMED 1996 ) ( THIRD REVISION ) DEGN:24345 CONDITION WP ROUNDED TO FULL SHEET WITH HARDNESS MINIMUM 130 VPN
ALUMINIUM ALLOY SHEET SIZE 2400 MM X 1200 MM X 3 MM THICK TO SPECN:-IS-737-1986, DEGN: 24345 CONDITION WP (ROUNDED TO FULL SHEET) WITH HARDNESS MINIMUM 130 VPN
R
Non Established
Category : P
Grade : I,II
Size :
O
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 23MM BS2874 CZ115 M LF 0711500023
Description : BRASS ROD 23MM BS2874 CZ115 M LF 0711500023()
Specification : BRASS ROD 23 +0.05/-0.10 MM DIA IN LENGTH OF 1.5 TO 2 METRE TO SPECN.BS:2874-1986 CZ-115 M
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011[07]()
Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M.
R
Nonestab
2) BRASS ROD 17MM SPECN IS 319 89 GR 2 LF 0712100017[07]()
Specification : BRASS ROD SIZE 17.00 MM OD TO SPECN.IS-319-2007 (FIFTH REV.)GR-2 HB- COND WITH PROP.TENSILE STRENGTH -380 MPa MIN.ELONGATION-10% MIN.ON /5.65 SQ.YEILD STRENGTH - 170 MPa MIN.HARDNESS - 60 TO 80 R.C "B" IN LENGTH OF ROD 2.5 TO 3 MTRS.
R
Nonestab
3) ALU ALLOY ROD 6MM IS 733 GRD 24345 LF 0611515550[06]()
Specification : ALUMINIUM ALLOY ROD 6+/-0.05MM DIA IN LENGTH OF 2.5 TO 3 MTRTO SPECN:BS-1474-1987 GRADE 2014-A OR IS-733-1983 GRD.243453rd.REV)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES-ELASTIC LIMIT 275 MPa Mi
R
Nonestab
4) ALU ALLOY ROD 26 50MM IS733 24345WP LF 0611505027[06]()
Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS
R
Nonestab
5) ALU ALLOY ROD 10 MM IS733 24345[06]()
Specification : ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2006) GRADE 24345 IN "WP" CONDITION.
R
Nonestab
6) BRASS ROD 29 MM BS2874 CZ122 M LF 0712200029[07]()
Specification : BRASS ROD 29 +/- 0.10 MM DIA IN LENGTH OF 1.5 TO 3 MTRS. TO SPECN: BS-2874-CZ-122 "M" CONDITION.
R
Nonestab
7) ALU ALLOY ROD 7 MM BS1474 2014A LF 0611500010[06]()
Specification : ALLU.ALLOY ROD 7 +0.03/-0.07 MM DIA IN LENGTH OF 2 TO 3 MTR TO SPECN:BS-1474-1987 GRADE 2014-A OR IS:733-1983 GRD.243453rd.Rev)(REAFFIRMED 2006)MATERIAL TO BE SUITABLY HEAT TREATED TO ACHIEVE FOLLO.MECH.PROPERTIES.ELASTIC LIMIT-275 MPa Mi
R
Nonestab
8) ALU ALLOY ROD 39 MM IS 733 24345 W LF 0611505039[06]()
Specification : ALUMINIUM ALLOY ROD 39+0.30/-0.20MM DIA IN ST.LENGTH OF 2 TO2.5 MTR.TO SPECN.IS-733-1983 (THIRD REV.)(REAFFIRMED 2006)GRADE 24345 CONDITION "W".
R
Nonestab
9) ALU ALLOY ROD 17 MM IS 733 24345 WP LF 0611505117[06]()
Specification : ALUMINIUM ALLOY ROD 17.0 MM(+0.10MM/-0.05MM) DIA IN STRAIGTHLENGTH OF 2.5 TO 3.0 METRE TO SPECN.IS:733-1983 (REAFFIRMED-2006) (THIRD REV.) GRADE 24345 IN "WP" CONDITION.NOTE:NO HIGH GRAIN SIZE AREA PERMITTED BELOW DIAMATER 13.96MM.
R
Nonestab
10) ALU ALLOY ROD 17 MM IS 733 GR 24345 LF 0611505017[06]()
Specification : ALUMINIUM ALLOY ROD 17 +0.30/-0.00 MM DIA IN STRAIGTH LENGTHOF 2.5 TO 3.0 METER TO SPECN.BS:1474-1987 GRADE 2014A OR IS:733-1983(THIRD REVISION)(REAFFIRMED2006)GRADE 24345.MATL.TOBE HEAT TREATED TO ACHIEVE THE FOLLING PROPERTIES;ELASTICLI
R
Nonestab
11) ALU ALLOY ROD 18 50MM IS 733 24345 LF 0611505019[06]()
Specification : ALUMINIUM ALLOY ROD 18.5 (+0.15/-0.05)MM DIA IN ST.LENGTH OF2.5TO 3 MTR TO SPECN:IS-733-1983(THIRD REV.)(REAFFIRMED 2006GRADE 24345 IN"WP"COND.OR BS-1474-1987GRADE 2014A IN"T6"CONDMAT.TO BE SUITABLY HEAT TREATED TO ACHIEVE THE ELASTIC LIM
R
Nonestab
12) ALU ALLOY ROD 60MM IS733 GR24345 W LF 0611505060[06]()
Specification : ALUMINIUM ALLOY ROD 60.0 +/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN.IS-733-1983(REAFFIRMED 2006)(THIRD REV.)GRADE-24345,CONDITION 'W'.
R
Nonestab
13) ALU ALLOY ROD 28 50MM BS1474 2014A LF 0619500029[06]()
Specification : ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.
R
Nonestab
14) ALU ALLOY ROD 60MM BS1474 2014A T 6 LF 0611509060[06]()
Specification : ALUMINIUM ALLOY ROD 60+/-0.30 MM DIA IN ST. LENGTH OF 1.8 METRES TO SPECN: BS 1474-1987-2014-A IN T-6 CONDITION.
R
Nonestab
15) BRASS ROD 21MM BS2874 CZ122 M LF 0712202021[07]()
Specification : BRASS ROD 21+/-0.15 MM DIA EXTRUDED DRAWN & REELED IN ST. LENGTH OF 2 MTRS. MINIMUM TO SPECN:-BS-2874-1986, CZ-122CONDITION "M".
R
Nonestab
16) BRASS ROD 37 5MM BS2874 CZ122M 0712200038[07]()
Specification : BRASS ROD 37.5 [+0.075/-0.13] MM DIA EXTRUDED DRAWN & REALED IN ST. LENGTH OF 2 - 3 METRES TO SPECN: BS-2874-1986 CZ-122 "M" COND. (LEAD CONTENT 1.0 TO 1.75%, ANTIMONY 0.02% MAX.
R
Nonestab
17) BRASS ROD 14MM BS2874 CZ122 M LF 0717703904[07]()
Specification : BRASS ROD 14+/- 0.10 MM DIA IN ST LENGTH OF 1.5 TO 2 METRES MIN SPECN.BS 2874-1986 CZ-122 "M"
Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB.
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Al alloy rod 35mm ENAW7075 T6 LF 0611505135
Description : Al alloy rod 35mm ENAW7075 T6 LF 0611505135()
Specification : Al alloy rod 35+/- 0.3mm in std. length of 2.0 to 3.0 meter to specification EN AW 7075-T6
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CUPRO NI STRIP BS EN 1652 LF 0700169101[07]()
Specification : CUPRO NICKEL STRIP SIZE 26+/-0.50 MM WIDE x 0.50[+0.02/-0.03 MM] THICK IN COILS. TO SPECN:- BS EN 1652:1998 DESIGN Cu Ni 25 WITH % Bi RESTRICTED TO 0.002%,MATERIAL CONDITION R-290 OR BS EN 1652:1998 DESIGN Cu Ni 10 Fe 1 Mn. MATERIAL CONDI
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) SS ERW PIPE()
AS PER DRG. NO. V48-0129-4019
C
Not Estab.
2) PHOSPHOR BRONZE ()
45MM SQX 1350 MM LONG
C
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8 5 MM LF 0711906011
Description : BRASS ROD 8 5 MM LF 0711906011()
Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
P
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MS PLATE 1MX1MX20MM SPECN IS 226 LF 0133021021
Description : MS PLATE 1MX1MX20MM SPECN IS 226 LF 0133021021()
Specification : MILD STEEL PLATE SIZE 1M X 1M X 20MM THICK TO SPECN.IS:226
E
Nonestab
Category : s
Grade : 3
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) STEEL BLANKS FOR ADAPTER[01]()
Specification : BS 970, Dt: 3 -1991, ASTM E 381 – 01, ASTM E 112 – 12, ASTM E 45 – 05 & IS: 8791 – 1978
R
Nonestab
2) STEEL BLANKS FOR BODY BASE OF RGB 60[01]()
Specification : BS 970, Dt: 3 -1991, ASTM E 381 – 01, ASTM E 112 – 12, ASTM E 45 – 05 & IS: 8791 – 1978
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 22X1 02 MM LF 0710664345
Description : BRASS STRIP 22X1 02 MM LF 0710664345()
Specification : BRASS STRIP 22+/-0.5MM WIDE x1.02+/-0.025MM THICK TO SPECN BS-2870-CZ-106 1/4 HARD. MATERIAL TOBE SUPPLIED IN COILS OFCONTINOUS LENGTH WEIGHT OF EACH COIL TO BE BETWEEN 10 T0 15 KG WITH INSIDE DIA OF COIL 70 TO 100MM,HARDNESS H.V.75 TO 90
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COPPER TO ASTM B 152 C10200 O PURITY 99 POINT 95 PERCENTAGE MIN TEMPER ANNEALING O TENSILE ST 205 TO 260 MPA ROCKWELL HARDNESS 65 MAX SIZE L 500MM W 172 MM OR ITS MULTIPLE WIDTH THICKNESS 2 PLUS OR MINUS 0 POINT 1 MM[01]()
Specification : COPPER TO ASTM B-152 C10200(O) PURITY 99.95% (MIN) TEMPER: SHEET SHALL BE PRODUCED BY HOT ROLLING & SUBSEQUENTLY ANNEALING (O), TENSILE ST:205 TO 260 MPA, ROCKWELL HARDNESS: 65 (MAX), SIZE:- L = 500MM, W= 172 MM OR ITS MULTIPLE WIDTH, THI
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Aluminium tube 80 5 x 60mm LF 0611558860
Description : Aluminium tube 80 5 x 60mm LF 0611558860()
Specification : Aluminium tube 80.5 x 60mm LF 0611558860
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020
Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
R
Estab
Category : s
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]()
Specification : 0720200095 PB ROUND ROD TO SIZE95MM DIA IN STD LENGTH TO SPECN IS: 7811-1985
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FERROUS AND NON FERROUS METAL[01]()
Specification : TENDER ID D332A52296
R
Estab
2) SEAMLESS TUBES[01]()
Specification : TENDER ID D332A52296
R
Estab
Category : P
Grade : II
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004
Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004()
Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans
R
Nonestab
Category : s
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008
Description : BRASS ROD 8MM BS2874 CZ122 M LF 0712100008()
Specification : 0321150115 STAINLESS STEEL TUBE TO SIZE OUTER DIA 115.00 (+) (-) 1.00 MM X INNER DIA 90.00 (+) (-) 1.00 MM X 510.00 (+)2.00 MM LONG TO SPECN: AISI-316.OR, AISI-304
Specification : 0321150125 STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010
Description : ALU ALLOY ROD 10 MM IS733 24345 ITEM CODE 0611403010()
Specification : ALUMINIUM ALLOY ROD 10.0 MM(+0.10MM/-0.00MM) DIA IN STRAIGHTLENGTH OF 1.8 TO 2 METRE TO SPEC IS-733-1983 (THIRD REVISION(REFFIRMED 2017) GRADE 24345 IN "WP" CONDITION.
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Cable Factory Chandigarh
Name
Specification
Use
Status
1) STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006[70]()
Specification : STAINLESS STEEL WIRE 0.381MM DIA AS PER MSCQ-5 SPECIFICATION NO. 03 ISSUE NO. 01 DATED 16/05/2006
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) COPPER STRIP TO SPECN IS 14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS 191 2007 SIZE 0 point 18 MM THICK 22 MM WIDE
Description : COPPER STRIP TO SPECN IS 14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS 191 2007 SIZE 0 point 18 MM THICK 22 MM WIDE()
Specification : COPPER STRIP TO SPECN.IS:14811:2000.CONDITION HD GRADE CU CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE.
R
Estab
2) CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED AND HEAT TREATED TO CONDITION R TO SPECN BS970 PART I 1983 GRADE 410S21 EN56A SIZE 7 MINUS 0 POINT 08 MM DIA
Description : CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED AND HEAT TREATED TO CONDITION R TO SPECN BS970 PART I 1983 GRADE 410S21 EN56A SIZE 7 MINUS 0 POINT 08 MM DIA()
Specification : CHROMIUM RUST RESISTING STEEL ROUNDS IN BRIGHT FINISHED ANDHEAT TREATED TO CONDITION "R" TO SPECN. BS970 (PART-I)1983 GRADE 410S21 (EN56A) WITH MIN. UTS 686MPA & IN STRAIGHT LENGTH OF 3 METRES WITH 10% SHORTS DOWN TO 2-3 MTRSSIZE : 7.00 -
R
Estab
3) ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP
Description : ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) Copper & Copper based alloys
Description : Copper & Copper based alloys()
3) Aluminum Bars/Rod size up to 1000 mm diameter max.and 6000x1500x4mm. max.
Description : Aluminum Bars/Rod size up to 1000 mm diameter max.and 6000x1500x4mm. max.()
Specification : As per Drawing/specification.
R
Estab
4) ALL TYPES OF STEEL SHEET AND STEEL ROUND
Description : ALL TYPES OF STEEL SHEET AND STEEL ROUND()
Specification : AS PER REQUIRED/SPEC./IS/BS
R
Estab
Category : s
Grade : 3
Size :
O
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) STAINLESS STEEL ROD TO BS 970 PT 1 1991 GRD 410 S 21 or 420 S 25 or 416 S 21 SIZE DIA 5 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH
Description : STAINLESS STEEL ROD TO BS 970 PT 1 1991 GRD 410 S 21 or 420 S 25 or 416 S 21 SIZE DIA 5 MM WITH MIN 1 point 5 MTR STRAIGHT LENGTH()
Specification : STAINLESS STEEL ROD TO BS 970, PT 1-1991 GRD 410-S-21 / 420- S-25 / 416-S-21 SIZE: DIA 5.0 +/- 0.05MM WITH MIN 1.5MTR STRAIGHT LENGTH
R
Estab
2) AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 16 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS
Description : AL ALLOY ROD TO SPEC BS 1474 1972 DESIG 2014A COND TB SIZE DIA 16 MM HAVING MIN 1 point 5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS()
Specification : AL ALLOY ROD TO SPEC BS 1474:1972 DESIG.2014A, COND TB SIZE: DIA 16 + 0.05/-0.10 MM HAVING MIN 1.5 MTR STRAIGHT LENGTH WITH 2 MM MAX PGG ON RADIUS
R
Estab
3) ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP
Description : ALUMINIUM ALLOY ROUND BAR SIZE 21 MM DIA SPECN IS 733 1983 REAFFIRMED 2006 GR 24345 IN WP()
Specification : ALUMINIUM ALLOY ROUND BAR TO SPECN.IS:733-1983 REAFFIRMED 2006 GR.24345 IN "WP" HAVING STRAIGHT LENGTH OF 2.00 TO 2.5 METRES SIZE: 21 +/-0.25 MM DIA AND GRAIN GROWTH OF MAXIMUM 2.5 MM ON RADIUS
R
Estab
4) ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 12 MM DIA WITHOUT PGG
Description : ALUMINIUM ALLOY ROUNDS TO SPECN IS 733 1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES SIZE 12 MM DIA WITHOUT PGG()
Specification : ALUMINIUM ALLOY ROUNDS TO SPECN.IS:733-1983 REAFFIRMED 2006 GRADE 24345 IN W CONDITION HAVING STRAIGHT LENGTH OF 2 TO 3 METRES, SIZE: 12 +/- 0.1 MM DIA WITHOUT PGG.
R
Estab
5) COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN IS 737 DESGN 24345 IN T6 CONDITION SIZE 3 POINT 5 MM THICK X 1 MTR WIDTH X 2 POINT 5 MTR LENGTH
Description : COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN IS 737 DESGN 24345 IN T6 CONDITION SIZE 3 POINT 5 MM THICK X 1 MTR WIDTH X 2 POINT 5 MTR LENGTH()
Specification : COLD ROLLED ALUMINIUM ALLOY STRIP TO SPECN.IS:737 DESGN-24345 IN 'T6' CONDITION.SIZE: 3.5 +0.15 MM THICK X 1 MTR WIDTH X 2.5 MTR LENGTH.
R
Estab
6) EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN DTD 5124 LATEST ISSUE IN T6 CONDITION HAVING STRAIGHTNESS OF 0 POINT 4 MM CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0 POINT 5 MM SIZE 70 MM
Description : EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN DTD 5124 LATEST ISSUE IN T6 CONDITION HAVING STRAIGHTNESS OF 0 POINT 4 MM CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0 POINT 5 MM SIZE 70 MM()
Specification : EXTRUDED ALUMINIUM ALLOY TUBE TO SPECN.DTD-5124 (LATEST ISSUE) IN "T6" CONDITION HAVING STRAIGHTNESS OF 0.4 MM, CONCENTRICITY BETWEEN INNER AND OUTER DIAMETER 0.5 MM SIZE: 70+1.5/-0.5 MM O/D X 58+1.5-0.5 MM I/D X 465 + 5 MM LONG
R
Estab
7) COPPER STRIP TO SPECN EN 13604 CW009A HAVING STRAIGHT LENGTH OF 2 point 5 TO 3 MTS SIZE 64 plus 1 MM WIDE X 4 plus 0 point 1 MM THICK
Description : COPPER STRIP TO SPECN EN 13604 CW009A HAVING STRAIGHT LENGTH OF 2 point 5 TO 3 MTS SIZE 64 plus 1 MM WIDE X 4 plus 0 point 1 MM THICK()
Specification : COPPER STRIP TO SPECN. EN 13604-CW009A HAVING STRAIGHT LENGTH OF 2.5 TO 3 MTS. SIZE:64 +/-1 MM WIDE X 4 +0.1 MM THICK
R
Estab
8) BRASS ROUND TO SPECN BS EN12166 1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2 POINT 55 PLUS OR MINUS 0 POINT 03 MM DIA
Description : BRASS ROUND TO SPECN BS EN12166 1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2 POINT 55 PLUS OR MINUS 0 POINT 03 MM DIA()
Specification : BRASS ROUND TO SPECN BS EN12166:1998 MATERIAL SYMBOLCUZN40PB2 NUMBER CW617N CONDITION R430 HAVING STRAIGHTLENGTH OF 2 TO 3 MTRS SIZE 2.55 +/- 0.03 MM DIA.
R
Estab
9) OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100 MM X THICKNESS 14 plus 0 point 1MM X 1440MM LONG APPROX
Description : OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100 MM X THICKNESS 14 plus 0 point 1MM X 1440MM LONG APPROX()
Specification : OFE COPPER STRIPS TO SPECIFICATION ASTMB 170 GRADE I HAVING DIMENSIONS WIDTH 100MM X THICKNESS 14 +0.1MM X 1440MM LONG (APPROX)
R
Estab
10) WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12 point 19 L 12 point 065 ID H9 point 65 THICKNESS SWG21 0 point 813 MM
Description : WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12 point 19 L 12 point 065 ID H9 point 65 THICKNESS SWG21 0 point 813 MM()
Specification : WASHER BRASS TO BS 2870 GRADE CZ108 HAVING OD H 12.19 L 12. 065, ID H9.65-0.127, THICKNESS SWG21 (0.813MM)
R
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM
Description : 6331001200 M S TARGET PLATE FOR CHARGE 100 MM()
Specification : IS:2062
C
Estab
2) 6338501200 M S TARGET PLATE FOR CHARGE 85 MM
Description : 6338501200 M S TARGET PLATE FOR CHARGE 85 MM()
Specification : M.S. TARGET PLATE AS PER IS SPECIFICATION IS:2062 L-500MM x W -500 MM x H 85 MM
C
Estab
Category : p
Grade : 3
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T[70]()
Specification : STEEL PIPE O D 100 00MM 0 50 MM X I D 78 00MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
R
Nonestab
2) 9910449732 STEEL PIPE O D 100 MM 0 50MM X I D 78 MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T[90]()
Specification : 9910449732 STEEL PIPE O D 100 MM 0 50MM X I D 78 MM 0 50MM THE PIPE SHOULD BE 1 9 MTRS OR ITS MULTIPLE LENGTH TO MATERIAL SPECN BS 970 PT 1 1983 GD 708 M40 OR 709 M40 CONDITION T
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) AL ROD 22 mm DIA to specn IS 733 DESIGNATION 24345 IN WP CONDITION[06]()
Specification : AL. ROD 22 MM +/-0.1 MM DIA TO SPECN. IS:733 DESIG. 24345 IN"WP" CONDITION WITH PGG 2.5 MM ON RADIUS (MAX) IN THE LENGTH OF 2 MTRS TO 3 MTRS . ULTRASONIC EXAMINATION OF THE ROD TO BE DONE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STEEL BAR 60MM DIA TO SPECIFICATION TU-14-1-1637-76 TO GRADE : BAR OF ALLOY KHISK60V14N11 (EP131)[03]()
Specification : AS PER SPECIFICATION
R
Nonestab
2) STEEL ROD DIA 55 MM X L1250 TO SPECN. OST 3-98-80 GRADE OF STEEL 30KHRA[03]()
Specification : AS PER SPECIFICATION
R
Nonestab
3) S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML[71]()
Specification : S S RODS BRIGHT GRADE AISI 316 SIZE 5 MM DIA 1000 MML
C
Nonestab
4) S S RODS DRIGHT GRADE AISI 316 SIZE 18 MM DIA 500 MML[71]()
Specification : S S RODS DRIGHT GRADE AISI 316 SIZE 18 MM DIA- 500 MML
C
Nonestab
5) Al alloy extruded rod 60 mm dia x multiple length of 555 mm with pggg 4 mm on radius to specn EN 755 2 AW AL 6082 IN T6 CONDITION[06]()
Specification : AS PER SPEC
R
Nonestab
6) S S SEAMLESS PIPE GRADE AISI 316 SIZE 127MM ODX 95 MM ID X900 MML[71]()
Specification : S S SEAMLESS PIPE GRADE AISI 316 SIZE 127MM ODX 95 MM ID X900 MML
R
Nonestab
7) STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE[01]()
Specification : STAINLESS STEEL ROUND GRADE AISI 316 SIZE 130 MM OD X 130MM LONG OR ITS MULTIPLE
R
Nonestab
Category : s
Grade : Grade III
Size :
S
1104
MUNISH FORGE PVT. LTD.
VILLAGE GOBINDGARH, ADJOINING PHASE VII FOCAL POINT LUDHIANA Punjab
PIN1 : 141010
Phone No. : 2671481 GSTIN : 03AABCM2155Q1ZE
DRG.PART NO.ISX-46GE SHEET-1 DC NO.37366-A, DT.26.07.14 & SHEET-2 DC NO.37366-A,DT.26.07.14
C
Not Estab
Category : DDP,DP
Grade : I,II
Size :
L
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Forged Head (Un- Machined )()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : II
Size :
L
1) Engine Factory Avadi
Name
Specification
Use
Status
1) Cylinder liner (Cast Iron Alloy) ()
303-07-26
C
Not Estab
2) Cylinder liner (Forging)()
303-07-22
C
Not Estab
Category : DDP,DP
Grade : I,II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) GENRAL MACHINE FORGING FROM 100 gm TO 150 kg()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
2) RUBBERIZED FORGINGS & FABRICATED PRODUCTS()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
3) ERW PIPE 1/2 INCH TO 4 INCH & ERW HOLLOW SECTION()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
4) ASSEMBLED FABRICATED/WELDED PRODUCTS()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
5) SHEET METAL COMPONENTS()
As GCF Spcn./Drg./Size & requirements
C
Not Estab
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]()
Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A
C
Estab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) T.A. LINK (COMPLETE)()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
2) FILLING PLUG FORGING 1000LB()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
3) FORGING FOR TA GUIDE()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
4) FORGED BODY FOR 81MM BOMB MORTAR-C()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
Category : P
Grade : I
Size :
L
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Proof Machined Body for 51 MM HE()
As Per Drg. No- SK- 8345/C
C
Not Estab.
Category : DDP
Grade : I
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB BODY ASSY. FOR 250KG PRE-FRAG.[99]()
Specification : BOMB BODY ASSEMBLY TO DRG. NO. ARDE 08040001030000000PB DT.14/05/2015.
C
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) MACHINING OF FORGED CANISTER[63]()
Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address :
Govt. Of India,
Ministry of Defence (DGQA)
Controllerate of Quality Assurance (Amn),
Khadki, Pune- 411 003
Telephone: 25824013-1
C
Nonestab
Category : ddp
Grade : Grade I
Size :
L
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CANISTER ASSY. FOR SHELL 155MM ILLG. M1A1[63]()
Specification : DRG. NO. 2440A13003 DC-36552-A
C
Nonestab
Category : ddp
Grade : Grade I
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY[99]()
Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB.
E
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 450 KG HSLD EMPTY ASSY ARDE-2122[99]()
Specification : HIGH SPEED LOW DRAG , 450 KG MC/HE, A/C BOMB EMPTY ASSEMBLY TO DRG NO ARDE-2122 DETAIL-1, 2SHEET- SHEET NO.1 R.NO.1DT.7-3-91 & 2 DT.11-04-07. SHEET NO 2 R.1 DT.7-3-91 & 2 DT13-4-07.
E
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHELL BODY BLANK FOR 84MM HE & ILLG.[99]()
Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)
C
Nonestab
2) BOMB AERIAL 100-120 KG HE, EMPTY[99]()
Specification : AERIAL BOMB 100 - 120 KG.(EMPTY ASSEMBLY) TO OFAJ DRG NO. AAIW/BS-0067 PACKED IN"PACKING FOR EMPTY AERIAL BOMB 100-120 "TO OFK DRG.NO.KhPK-410026(4 SHEETS). Painted externally lightgrey ISC 631 of IS-5-2007(6th Rev)to Specn IS-168-1993 DC
E
Nonestab
3) SET OF BOMB BODY EMPTY ASSY FOR AERIAL BOMB 100-120 KG[99]()
1) GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK-989,3145/63[70]()
Specification : GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY)WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TOARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA)SK
Specification : MOULDING POWDER, MOULDINGPLASTICS (PHENOLIC)
TO SPECCN NO. JSS 1097 GRD. "Z" WITH A MINIMUM IMPECT STRENGTH OF 0.81 JOULE AND MINIMUM TENSILE STRENGTH OF 41.37 MPa/ or nylon 66 gp colour black to specn deef/ stan 93-8/1 without glass fi
C
Estab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE ASSEMBLY TO DRG.NO.AR/024-RFI. FOR ASSAULT RIFLE 7.62MM.(GHAATAK).(TRADE FINISH). CONSISTING OF:- I)AR/023/2/2. II)AR/024/01-RFI. III)AR/024/02-RFI. IV)AR/024/03-RFI & V)AR/024/04-RFI[70]()
Specification : MAGAZINE ASSEMBLY TO DRG.NO.AR/024-RFI. FOR ASSAULT RIFLE 7.62MM.(GHAATAK).(TRADE FINISH). CONSISTING OF:- I)AR/023/2/2. II)AR/024/01-RFI. III)AR/024/02-RFI. IV)AR/024/03-RFI & V)AR/024/04-RFI
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(PROV). FOR RI[79]()
Specification : GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA)2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) &4) 5305-077989 (WITH S.S.REFLECTOR).ARDE SPECN.ARDE/SPECN/538(P
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:-1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) &3)5320-022259(DC-26504-SA),(2-NOS.)FOR RIFLE 5.56MM INSAS.[79]()
Specification : GUARD HAND ASSY.(UPPER)(STEEL STRIP)[FOR DARK BLUE GRAY COL.TO DS CAT NO.1005-560046 (DC-26533-SA). CONSISTING OF:-1)1005-560047(DC-25638-SA) 2)1005-560832(DC-26635-SA) &3)5320-022259(DC-26504-SA),(2-NOS.)FOR RIFLE 5.56MM INSAS.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()
Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
2) GUARD HAND LEFT and RIGHT ASSY PLASTIC No 2 CQA SA 91 D S CAT No 1005 007723 D C No 22706 SA Dt 5 point 11point 94 IMPROVED VERSION FOR RIFLE 7point 62mm 1A1 TO D S C T No 1005 007504 1005 007505 1005 007506 1005 007507 1005 001593 1005 1718[70]()
Specification : AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,
E
Nonestab
3) SUPPLY OF LOWER HAND GUARD BAND AS PER DRG NO K 1204 STAR WITH FIRMS MATERIAL[70]()
Specification : K-1204*
C
Nonestab
4) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
5) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Nonestab
6) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()
Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUTT NORMAL ASSEMBLY PLASTIC WITH PLATE BUTT ASSEMBLY TO D S CAT NO 1005 004025 DC NO 26416 SA DATED 09 05 2008 WITH DETAILS OF LATEST ISSUE D S CAT NOS 5305 005010 5340 015297 5340 016097 1005 001664 1005 004026 1005 004028[70]()
Specification : BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028,100
C
Nonestab
2) MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR[70]()
Specification : MANUFACTURING AND SUPPLY OF STOCK BUTT SUB ASSY AS PER DRAWING NUMBER 30P 5010 STAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO KC3 2050 WITH FIRMS MATERIAL FOR TRICA
C
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO KC3 2040 WITH FIRM S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF SCREW AXIS MAGAZINE CATCH TO D S CAT NO 5305 018183 D C NO 25762 SA DT 10 6 03 REQUIRED IN WHITE FINISHED CONDITION WITH FIRMS MATERIAL[70]()
Specification : AS PER D.S.CAT NO.5305 - 018183 D.C. NO. 25762-SA DT. 10-6-03. (REQUIRED IN WHITE FINISHED CONDITION) WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG NO K 4011 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-4011 WITH FIRMS MATERIAL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : UPPER HAND GUARD ASSY AS PER DRG NO K 2050 ALT STR 2 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326[70]()
Specification : AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COVER FOR FIRING MECHANISM TO DRG. NO. 30P 3038[70]()
Specification : AS PER DRG OF COVER FOR FIRING MECHANISM TO DRG. NO. 30P 3038
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SCREW PISTOL GRIP TO D S CAT NO 5305 005004 ICR 1380 TO LATEST D C No 24275 SA DATED 26 02 1999 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER D.S. CAT. NO. 5305-005004 (ICR - 1380) TO LATEST D.C No.24275-SA DATED 26.02.1999 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED
1) HANDLE CARRYING ASSEMBLY PLASTIC ICR 63SA D S CAT No 1005 004051 D C No 19513 SA DATED 25 02 1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA 150 G D C No[70]()
Specification : AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),
C
Nonestab
2) 14 5 MM MAGAZINE ASSY TO DRG NO 16000 ST 2 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
3) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
4) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
5) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]()
Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL
C
Nonestab
6) SUPPLY OF TRIGGER TO DS CAT NO 1005 001690 ICR 1238 DC NO 27044 SA DT 23 03 2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : SUPPLY OF TRIGGER TO DS CAT NO 1005-001690 (ICR 1238) DC NO 27044-SA DT. 23.03.2017 WITH FIRMS MATERIAL FOR DC NO LATEST ISSUE TO BE FOLLOWED
R
Nonestab
7) Manufature and supply of BUTT NORMAL ASSEMBLY POLYMER AS PER DRG NO 27P 660 02 FOR RIFLE 7 62MM 1A1[82]()
Specification : Manufature and supply of BUTT NORMAL ASSEMBLY (POLYMER) AS PER DRG. NO. 27P 660-02.FOR RIFLE 7.62MM 1A1
E
Nonestab
8) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
9) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
10) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Grip Pistol Assembly as per drawing No 27P 6500[70]()
Specification : Manufacture and Supply of Grip Pistol Assembly as per drawing No. 27P 6500 for Rifle 7.62mm 1A1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : 20MM MAGAZINE ASSEMBLY TO DRAWING NO 44P 10000 STAR 2 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1113
DAS & KUMARS
NEAR HARSH GASES, VARANASI d 63/10 VARANASI Uttar Pradesh
PIN1 : 221010
Phone No. : 9839098484 GSTIN : 09AABFD6235F1ZN
Specification : GASKET IN VALCUNISED CHLOROPRENE RUBBER COMPOUND (NEOPRENE) TO SPECIFICATION IND/ME/884 (PROV), CLASS C40 FOR STEEL PACKAGES 120MM ARJUN AMMUNITION AS PER DRG. NO. OFBH/PACKAGE 120 MM/ C/2113. NABL TEST CERTIFICATE OR GOVT. ACCREDITED LAB
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the cont
R
Nonestab
10) CORD NYLON 3120N B.L. WHITE[2101116236]()
Specification : SPCEN. IS:4227-1998 except that in appearence finish and all other respect not defined in this specification the material shall confirm to the sealed pattern held in the custody of the controller, CQAT&C, KANPUR. Sampling plan, criteria
Specification : Spcns. NUMBER OF SPINDLES=16;NUMBER OF ENDS=32NUMBER OF PLAITS/DM=38-44;NUMBER OF CORE THREADS=3 WEIGHT/M IN GMS=6.3 MAX.TEX OF YARN SHEATH=16.7X3X3
CORE =16.7X6X3 BREAKING LOAD IN KG (15CM BETWE
R
Nonestab
13) CORD NYLON BRAIDED 2452N FOR PP[21]()
Specification : JSS:4020-8
R
Estab
14) TAPE NYLON TUBULAR 25MM 13380N UD[21]()
Specification : JSS:8315-07-1982
R
Estab
15) TAPE TEXTILE NYLON 14MM UD[21]()
Specification : ADRDE/Specn/1993/44
R
Estab
16) TAPE NYLON 19 MM UNDYED[2101776052]()
Specification : SPECIFICATION NO. : ADDE/BP/3(c).
R
Nonestab
17) TAPE TEXTILE NYLON 25.4MM UD[21]()
Specification : ADRDE/Specn/1983/11
R
Estab
18) TAPE TEXTILE NYLON 32MM UD[21]()
Specification : JSS:8315-06-1981
R
Estab
19) TAPE TEXTILE NYLON 38MM UD[21]()
Specification : JSS:8315-07-1982
R
Estab
20) TAPE TEXTILE NYLON 44 MM (BS 6914 N) V. NO.6 NAVY BLUE[2101786844]()
Specification : SPECIFICATION NO.: JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
21) TAPE TEXTILE NYLON 14MM DYED[21]()
Specification : IS:9267-1979
R
Estab
22) TAPE TEXTILE NYLON 19 MM O.G. (BS=1893-N) V.NO.2[2101776047]()
Specification : SPECIFICATION NO. :JSS:8315-6 OR IS:4228
Specification : SPECIFICATION NO. TECH PART NO.ADRDE/QMS/
TGTE/C/2018/04 DATED.13.06.2018
R
Nonestab
38) CARDAGE NYLON 66,23 KG CORELESS[2101726659]()
Specification : 1S;4227-1998.
R
Nonestab
39) BRAIDED NYLON CORD FOR A.P.[2111402221]()
Specification : SPECN-IS:4227(VARIETY NO.-11_)
R
Nonestab
40) BRAIDED NYLON CORD FOR AERO SPACE PURPOSE(BS:68 KGf)[2101119846]()
Specification : SPECN. NO. IS:4227-1998.(V NO.6)
R
Nonestab
41) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013,
( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the control
Specification : SPECIFICATION NO. : JSS - 4020 - 8 EXCEPT THAT IN APPEARANCE
R
Nonestab
47) CORD NYLON BRAIDED 250 KG U/D (I CODE 6412)[2101126412]()
Specification : SPECN-ADRDE/QMS/TDTM/C-2010/04
R
Nonestab
48) CORD NYLON BRAIDED FOR PARACHUTE 225 N WHITE[2101119836]()
Specification : SPECIFICATION NO. : IS:4227-1998
R
Nonestab
49) CORD NYLON BRAIDED UNDYED 345 N ( CORELESS ) FOR AMMUNITION PARA[2101119845]()
Specification : SPECN.NO.: ADRDE/SPECN/1987/31.
appearance, workmanship, finish and in all other respects not defined in this ADRDE Sprcification the material shall conform to the sealed pattern held in the
custody
R
Nonestab
50) CORDAGE NY. 66, BRAIDED 2940 N U/D[2101126278]()
57) CORDAGE NYLON BRAIDED 12 MM BS:1200 KG ,COLOUR-OLIVE/DARK --GREEN WEIGHT 7000 + - 50 GM/100 MTR[9911022276]()
Specification : SPECN NO.:-IS:4227 MANUFACTURED FROM HIGH TENACITY NYLON
R
Nonestab
58) CORD NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D 4020-000298[2101116209]()
Specification : SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the materi
R
Nonestab
59) CORDAGE NYLON BRAIDED 318 KG I.CODE-6263[2101126263]()
Specification : SPCN. NO:IS:4227-1980 EXCEPT MASS/ METRES NOT TO EXCEED 8GM.
R
Nonestab
60) CORDAGE NYLON BRAIDED 5331 N[2101126246]()
Specification : SPECN. NO.: IS : 4227-1981
R
Nonestab
61) CORDAGE NYLON BRAIDED BS-3600 N U/D[2101126341]()
Specification : SPECIFICATION NO. : IND/TC/2555 except that :-
in appearance finish and other respects not defined in this
specification the material shall conform to the sealed
pattern held in the custody of the Controller,CQAT&C
R
Nonestab
65) CORDAGE NYLON BS-1800 N OLIVE GREEN[2101126340]()
77) TAPE NYL.15MM BS 185 KG U/D.THE TAPE SHALL BE IN CONTINUOUS LENGTH OF 110 M(EXCLUTING SAMPLING)WITHOUT ANY FLAG OTHERWISE THAT ROLL BE TREATED AS SHORT LENGTH[2101221273]()
Specification : SPECN-IS:4228.& SHALL HAVE THE FOLLOWING DIMENSIONS & PROPERTIES.
1-COUNT OF YARN-210 DENIER, HIGH TENACITY.
2-WIDTH-25 MM +-1MM.
3-THICKNESS-0.5 MM TO 0.8 MM.
R
Nonestab
111) TAPE NYLON 25.4 MM (BS 227 KG)[2101786886]()
Specification : SPCN. NO.ADDE/BP/3(c)
R
Nonestab
112) TAPE NYLON 25.4 MM BS=137 KGS. U/D[2101796985]()
Specification : ADDE/BP/1(B) WITH 20-30% ELONGATION & PROPER HEAT SETTING
R
Nonestab
123) TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS[2101786939]()
Specification : 1-LENGTH PER ROLL(MIN) --100M ---IS:1954
2-WIDTH IN MM 28 + - 0.5 ---IS:1954
3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702
4-MASS,gm,MAX --17gm ---IS:4727
5-BREAKING LOAD "N" MIN. --7500 ---IS:1969
R
Nonestab
124) TAPE NYLON 30 MM O.G. BS 580 KG.[2101786930]()
134) TAPE NYLON 66,43 MM.B.S. 9000 N U/D[2101797010]()
Specification : ADRDE/SPECN/1985/27(a)
R
Nonestab
135) TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N)[2101786912]()
Specification : SPECIFICATION :-WIDTH -26MM.
THICKNESS-0.58+-.01 MM
WT./MTR.-6.6 GM
NO.OF ENDS-178+1 INTERLOCKING
PICKS/CM-26
TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N
R
Nonestab
136) TAPE NYLON TUBULAR 2.54 CM (BS-240 KG)[2101786926]()
Specification : SPECIFICATION:IND/ADE/0061
R
Nonestab
137) TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG[2101786895]()
Specification : AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a)
WIDTH - 25.4 MM,
THICKNESS - 2.35 MM (MAX)
MASS/METER - 36.5 GM (MAX.)
NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE)
PICKS/
R
Nonestab
138) TAPE NYLON TUBULAR 25.4 MM WHITE 2355 N[2101777058]()
Specification : SPECIFICATION NO.: IND/TC/2666 ROLL LENGTH 55 MTR. INCLUDING SAMPLING
Specification : SPECN.NO.AS PER PARTICULAR
1.WIDTH : 25.4MM
2.THICKNESS : 2.35MM
3.Wt/mtr IN gms : 36.5 gms ( MAX.)
4.NO. OF ENDS : 316 +_ 2 GOLDEN THREADS AT CENTER (INCLUDING BOTH LAYERS )
5.PICKS
145) TAPE PARA-ARAMID 25 MM, 1000 KGF[2010797688]()
Specification : SPECN. NO. ADRDE/2002/57.
R
Nonestab
146) Tape Para-aramid 26 mm, 1600 kgf Tubular[2010797689]()
Specification : ADRDE/SPECN/2002/57
R
Nonestab
147) TAPE POLYESTER 13 MM BS:1800 - N[2101796983]()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS--
R
Nonestab
148) TAPE POLYESTER 13.5 MM BS:3200-N[2101796982]()
Specification : SPECIFICATION :-
WIDTH-------------------------13.5 MM +/-1
WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX)
B.S.IN NEWTON-----------------3200-N (MIN)
THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX)
TEX OF YARN----WARP--110 (FACE + BAC
R
Nonestab
149) TAPE TEXTILE NYLON 14 MM BS 230 KG[2101776045]()
Specification : JSS : 8315-06 EXCEPT THAT: PICKS/DM -260-280
(2 PICKS/SHED) WEFT YARN DENIER -210 X 2 or 420 X 1
R
Nonestab
150) TAPE TEXTILE NYLON 19MM NAVY BLUE (BS 1893 N) VARIETY NO.2.[2101786820]()
Specification : SPECIFICATION NO. :JSS:8315-06 SAMPLING PLAN AS PER ANNEXURE-II
R
Nonestab
151) TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3[2103784274]()
Specification : SPECIFICATION :-JSS 8315-6
R
Nonestab
152) TAPE TEXTILE NYLON 43 MM U D BS 9000 N[2101786843]()
159) TAPE TUBULAR NYL.36 MM 2900 KG U/D[2101797648]()
Specification : AS PER PARTICULARS: WIDTH: 36/(+2/-0)MM THICKNESS: 4.0MM(MAX MASS/MTR.:78GM(MAX). BREAKING STRENGTH: 2900KG(MIN)
CONSTRUCTION OF YARN: WARP- 96.3X3 ie.96.3/1X3
TEX X FOLD: WEFT - 15.7X9. ENDS IN FULL WIDTH: 219 PICKS/DM: 66( BOTHLAYERS
R
Nonestab
160) TAPE TUBULAR NYLON 1.1 CM 450 KG U/D[2101797665]()
161) TAPE TUBULAR NYLON 14 MM UNDYED[2101786814]()
Specification : SPECN.NO.ADRDE/SPECN/1981/6.
R
Nonestab
162) TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.)[2101786894]()
Specification : SPECN. NO.ADDE/SPECN/1992/38.
R
Nonestab
163) TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED[2101786908]()
Specification : SPECIFICATION NO.: BS=17650 N (1800 KG MIN.)
WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM
WT. PER MTR.IN GRM 40 MAX.
R
Nonestab
164) TAPE TUBULAR NYLON 22 MM 700 KG U/D.[2101786934]()
Specification : SPECN NO. ADDE/BP/1(b).
R
Nonestab
165) TAPE TUBULAR NYLON 27 MM BS 1600 KG[2101786958]()
Specification : NEW TECHNICAL PARTICULAR NO ADRDE/QMS/TGTE/T/2019/01 DATED : 15 JAN 2019
R
Nonestab
166) TAPE TUBULAR NYLON 27 MM U/D BS 2000 KG.[2101786935]()
Specification : SPECN NO. AS PER PARTICULARS. 1.WIDTH (MM) 26+-1
2.THICKNESS AT 200 gms/SQ.CM PRESSURE,MM MAX 3.25
3.MASS/METERS,(gm) MAX 47
4-ENDS IN FULL WIDTH SUGGESTED 130
5.PICKS/CM SUGGESTED
172) WEBBING NYL 50 MM OG BS 2950 KG[2101877394]()
Specification : SPECN-IS:4727 EXEPT WIDTH
R
Nonestab
173) WEBBING NYLON 44MM 2500 KG GREY[2101626734]()
Specification : SPECN: WIDTH: 44/(+0/-1)MM THICK:2.7/(+/-0.1MM)WT/MT:79G(MAX)
B.S:2500KG(MIN).NO OF ENDS IN FULL WIDTH FACE&BACK 260 BINDERS-42. PICKS/DM: 240/244 (BOTH LAYER).
CONSTRUCTION OF YARN (TEX X FOLD) WARP 29.6X3X2, WEFT
R
Nonestab
174) WEBBING NYLON 102 MM UNDYED[2101877101]()
Specification : SPECIFICATION:ADD/MAT/1
R
Nonestab
175) WEBBING NYLON 13MM (BS=460KG).[2101877067]()
Specification : IS: 9267-1979
R
Nonestab
176) WEBBING NYLON 25.4 MM UNDYED[2101877025]()
Specification : SPECN NO :ADRDE/SPECN/1983/11(b)
R
Nonestab
177) WEBBING NYLON 43 MM UNDYED BS = 4800 KG.[2101877343]()
178) WEBBING NYLON 44 MM (2950 KG) FOR P.P. NAVY BLUE[2101877044]()
Specification : Specification No. : IS : 4727-1968.
SAMPLING PLAN : As per Annexure I attached.
Pre-Inspection, Warranty clause, Advance sample Clause &
Packing & Marking as per Annexure II ATTACHED
R
Nonestab
179) WEBBING NYLON 44 MM 1000 KG STEEL GREY[2101877117]()
Specification : SPECN-NO:-CIADE/35 (b)
R
Nonestab
180) WEBBING NYLON 44 MM 1815 KG NAVY BLUE FOR P.P.[2101877144]()
Specification : Specification No.: IS : 4727-1968.
SAMPLING PLAN AS PER ANNEXURE III ATTACHED.
R
Nonestab
181) WEBBING NYLON 44 MM 1815 KG STEEL GREY[2101877119]()
Specification : SPECNS NO. IS:4727-1968.
R
Nonestab
182) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968
R
Nonestab
183) WEBBING NYLON 44 MM O.G. 1815 KG.[2101876971]()
Specification : SPCN.NO. IS:4727 LATEST.
R
Nonestab
184) Webbing Nylon 44 mm OG[9911022278]()
Specification : Specification - IS:4727 (Type-2) and shall have the following dimensions and properties:-
1. Count of yarn- 840 denier high tenacity nylon yarn.
2. width- 44 mm +- 1.5 mm
3. thickness - 1.1 mm (min) to 2.0 mm (max)
4.breaking s
R
Nonestab
185) WEBBING NYLON 44 MM U D 17800N[2101876973]()
Specification : SPECN. NO.: IS:4727-1968 except for :-
i)Sampling Plan and Criteria of conformity shall be as per CQAT and C/QAI NO.CQAT and
C/QAI/TC-8/7(b).
ii)In appearance, workmanship, finish and all other respects not defined in this IS Specn.
R
Nonestab
186) WEBBING NYLON 44 MM, OG.BS-1815 KG F RESIN TREATED[2101292003]()
188) WEBBING NYLON 44mm 1000kg OG (I.CODE 7078)[2101877078]()
Specification : ADRDE/QMS/TDTM/SPECN/99
R
Nonestab
189) WEBBING NYLON 44mm 9807N U/D[2110999003]()
Specification : SPECN: CIADE/35 (b)
R
Nonestab
190) WEBBING NYLON 44mm OG 2950kg.[2101876972]()
Specification : SPECIFICATION NO.: IS : 4727-1968.
R
Nonestab
191) WEBBING NYLON 51 MM UNDYED BS=480 KGS.[2101877051]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.
R
Nonestab
192) WEBBING NYLON 60MM BS4000KG U/D IN ROLL LENGTH 105M(EXCL.SAMPLING)[2101221276]()
Specification : SPECN-AS PER PARTICULARS---- WIDTH :60(+0,-2)MM
THICKNESS :4.0(+-0.1MM, WEIGHT/METER 135 GM
BREAKING STRENGTH :4000 KG(MIN),HEAT SETTG:PR.HET.SETG REQD
TOTAL NO.OF END:309+1 INTERLOCK.THREAD(4 END WORKING AS ONE)
PICKS/DM :
R
Nonestab
193) WEBBING NYLON 85mm OG[2101877109]()
Specification : SPECN NO AS PER PARTICULAR.
WIDTH IN MM :-------------= 85 +(-)1.0
THICKNESS IN MM )
AT 200 gm/cm Sqr.PRESSURE)= 2.0/2.1
MASS/MTR.IN Gms.-----
R
Nonestab
194) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 1100 KG).[2101877114]()
Specification : SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 100mtr. Roll Length Excluding sampling.
R
Nonestab
195) WEBBING NYLON TUBULAR 14 MM UNDYED (BS 680 KG).[2101877014]()
1) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
3) LEATHER LINING BLACK COMBINATION TANNED DRY MILLED()
AS PER REQUIREMENT & SPECIFICATION
R
Non Established
Category : P
Grade : II
Size :
S
1) Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
7) Wet Blue for Lining Leather[21]()
Specification : QA/L/WET BLUE/BUFF(Lining) date 19.05.2009
R
Nonestab
8) EYELETTED CLOSED UPPER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
9) EYELETTED CLOSED UPPER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
10) EYELETTED CLOSED UPPER FOR HIGH ANKLE BOOT IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
11) Eyeletted Closed Upper with stiffner for Derby Shoe in various sizes[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
12) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR BOOT ANKLE DVS IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
13) EYELETTED CLOSED UPPER WITH TOE PUFF AND COUNTER STIFFNER FOR ELECTRICAL SAFETY SHOE IN VARIOUS SIZE[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
14) EYELETTING OF CLOSED UPPERS[21]()
Specification : IND/TC/3844
R
Nonestab
15) LASTED CLOSED UPPER FOR BOOT NAVY IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
16) LASTED CLOSED UPPER FOR SAFETY SHOE IN VARIOUS SIZES[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
Category : P
Grade : II
Size :
1) Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) BUFF VT SOLE BEND[21]()
Specification : BP SECTION L/NO. BP/T&C/VT SOLE BEND/01 DATE 07.02.2013 AND AS IN TE
R
Nonestab
2) LASTED UPPER OF VARIOUS SIZES FOR BOOT HIGH ANKLE DVS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
3) Leather Buff Wet Blue for Zuggrain/Football Print/Upper Leather[21]()
Specification : QA/L/WET BLUE/BUFF date 22.03.2009 (As per special Terms & Conditions attached). Measuring of Wet Blue Leather may be done either by hand or by measuring machine
R
Nonestab
4) LEATHER BUFF. CHROME TANNED SIDE BLACK FOOT BALL PRINT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) LEATHER CHROME TANNED SIDE BLACK PLAIN VARIOUS[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
