Specification : Housing to Casting Drg No. D-5178463(Rev-A)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to Investment Casting Drg No. D-4082394()
Specification : Arm to Investment Casting Drg No. D-4082394(Rev-A)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to Drg No. D-6358150()
Specification : Arm to Drg No. D-6358150(Rev-A)
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to casting drg no. D-4082416()
Specification : Arm to casting drg no. D-4082416
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Flap Right to investment casting to Drg. No. D-5179089()
Specification : As per Drg. No. D-5179089
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Arm to Casting()
Specification : As per Drg. No. D-4082388(Rev-A)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Holder to Investment Casting()
Specification : As per Drg . No. D-4082393/1(Rev-A)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Flap Left investment casting Drg No. D-5179088()
Specification : Flap Left investment casting Drg No. D-5179088
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Cover Left to Investment Casting Drg No. D-5179086()
Specification : Cover Left to Investment Casting Drg No. D-5179086
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Guide Casting and Machining as per drawing No SK 6501 TE[70]()
Specification : Guide- Casting and Machining as per drawing No. SK- 6501 /TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007[70]()
Specification : IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC PISTOL GRIP BASE AS PER DRG NO K-IC-1106[70]()
Specification : AS PER DRG NO K-IC-1106
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC CROSS BOLT HOOK LATCH AS PER DRG NO: K-IC-4004[70]()
Specification : AS PER DRG NO: K-IC-4004
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023) FOR 12.7 MM AD GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6023 250 E3 CATCH FRICTION COVER FEED (A 6023)
FOR 12.7 MM AD GUN.
"
C
Nonestab
2) INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 6019 250 F3 FOR BRACKET HOLDING FRONT COVER.
"
C
Nonestab
3) INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.NO.62C 6025 250 F3. HANDLE CATCH FRICTION (A 6025)
"
C
Nonestab
4) INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER
"
C
Nonestab
5) INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1006 250 E3 REQUIRED FOR BRACKET FORE SIGHT
"
C
Nonestab
6) INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN. A 1013[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN.
A 1013
"
C
Nonestab
7) INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 7101 250 J3. FOR BODY TRIGGER MECHANISM (A7101) OF 12.7mm A.D. GUN.
"
C
Nonestab
8) INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3. FOR HOUSING EJECTOR.[70]()
Specification : AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 2463 250 G3.
FOR HOUSING EJECTOR."
C
Nonestab
9) BRACKET CATCH REAR COVER FOR 12.7 MM A/D GUN (A6020) INV.CAS TING TO DRG.NO.62C 6020 250 E3[70]()
Specification : AS PER DRG OF "BRACKET CATCH REAR COVER FOR 12.7 MM A/D GUN (A6020) INV.CAS TING TO DRG.NO.62C 6020 250 E3
"
C
Nonestab
10) DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3[70]()
Specification : AS PER DRG OF "DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3
"
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) DOVETAIL FEMALE AS PER DRG. NO.CWC-231/2/1[74]()
Specification : DOVETAIL FEMALE AS PER
DRG. NO.CWC-231/2/1
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HINGE TO 3806102369[38]()
Specification : 175.02.352-2/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC RETAINER AS PER DRG NO: K-IC-2091. (LF.No.7024020910)[70]()
Specification : AS PER DRG NO: K-IC-2091. (LF.No.7024020910)
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Finished Through IC Machining route for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Estab
2) NUT AS PER DRAWING NO SK 6513 TE[70]()
Specification : NUT AS PER DRAWING NO SK 6513 TE
C
Estab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Estab
4) RETAINER AS PER DRAWING NO SK 6521 TE[70]()
Specification : RETAINER AS PER DRAWING NO SK 6521 TE
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) INVESTMENT CASTING FOR BLOCK TOP TO DRG. NO.SK-3868*.[70]()
Specification : As per DRG.
C
Nonestab
2) INVESTMENT CASTING FOR LEVER LOCKING TO DRG. NO.SK-3715*[70]()
Specification : As per Drg.
C
Nonestab
3) I.C. of Cocking Bracket for JVPC DRG. No. SK JVPC-598[70]()
Specification : AS PER DRG.
C
Nonestab
Category : DP
Grade : I
Size :
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) NOZZLE TO LF 3801087025[38]()
Specification : GOST 977 - 88
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HOUSING TO LF 3806209016[38]()
Specification : GOST 977 - 88
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET RH TO LF 3801063041[38]()
Specification : GOST 977 - 88
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PAWL TO DRG NO C1024 WITH FIRMS MATERIAL IN FULLY FINISHED AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) CONNECTING LINK RIGID TO DRG NO C5028 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) CONNECTING LINK RIGID TO DRG NO 5112 WITH FIRMS MATERIAL IN FULLY FINISHED CONDITION AND THE MANUFACTURING SHOULD BE THROUGH INVESTMENT CASTING ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) CASTING & MACHINING ( Heavy duty )
Description : CASTING & MACHINING ( Heavy duty )()
Specification : AS PER DRG./SPECN.
C
Estab
2) Investment Castings of high alloy Stainless Steel, Nickel & Cobalt based Alloys, Carbon Steel & Low
Description : Investment Castings of high alloy Stainless Steel, Nickel & Cobalt based Alloys, Carbon Steel & Low()
Specification : As per the Requirements of GCF drawing & Specifications. ..
C
Estab
Category : p
Grade : 3
Size :
O
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.[70]()
Specification : SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG[70]()
Specification : INVESTMENT CASTING OF TRIGGER ( RFI SK 9100)FOR 12 BORE PAG
C
Estab
2) INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.[70]()
Specification : INVESTMENT CASTING OF TRIGGER LOCKING BRACKET(RFI SK NO - 9102) FOR 12 BORE PAG.
C
Estab
3) INVESTMENT CASTING OF CONNECTOR BUTT EXR OF RIFLE 5.56MM EXCALIBUR MK.1[70]()
Specification : BS
C
Estab
4) INVESTMENT CASTING OF BODY FOR 12 BORE PAG.[70]()
Specification : MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A'
C
Estab
5) INVESTMENT CASTING OF RECEIVER FOR 0.32 PISTOL [70]()
Specification : bs
C
Nonestab
6) INVESTMENT CASTING FOR HINGE COVER. FOR RLFLE 5.56MM INSAS.[70]()
Specification : bs
C
Estab
7) INVESTMENT CASTING OF RETAINER SPRING RECOIL(MODIFIED) FOR RIFLE 5.56 MM INSAS.[70]()
Specification : bs
C
Estab
8) INVESTMENT CASTING FOR SLIDE(RETRACTING) FOR RIFLE 5.56MM INSAS.[70]()
Specification : bs
C
Estab
9) INVESTMENT CASTING OF BRACKET(WITH HEAT TREATMENT) FOR RIFLE 5.56MM.INSAS.[70]()
Specification : bs
C
Estab
10) INVESTMENT CASTING OF HOUSING SIGHT REAR FOR RIFLE 5.56MM INSAS.[70]()
Specification : INVESTMENT CASTING OF HOUSING SIGHT REAR TO RFI SK. NO. 6093*6. (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.
C
Estab
11) INVESTMENT CASTING OF BODY FOR PISTOL AUTO 9MM 1A.[70]()
Specification : INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A.
C
Estab
12) INVESTMENT CASTING FOR CATCH SAFETY FOR PISTOL AUTO 9MM 1A.[70]()
Specification : INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.
C
Estab
13) INVESTMENT CASTING OF LEVER CHANGE FOR RIFLE 5.56MM INSAS.[70]()
Specification : INVESTMENT CASTING OF LEVER CHANGE TO RFI SK-4686*9 (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER,TRIPPING FOR PISTOL AUTO 9MM 1A [70]()
Specification : LEVER,TRIPPING TO DS CAT NO. 5340-016094 ( LT.DC- 26827 SADT.10-5-2016).MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PERCOL.(C) OF SL. NO.1 OF CQA(SA) NOTE SHEET NO.1.NMIR TEST TO IS:4163-82 WILL BE AS PER COL.(C) OF SL. NO.3OF CQA(SA) NOTE
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FOUR TYPES OF CASTING[02]
1(a) Sand Castings/172 TY-4,GOST 977-88
1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73
2.Investment Castings/172 TY-10, GOST 977-88
3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75
4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.()
Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS
R
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE
Description : INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE()
Specification : AS PER DRG.
C
Estab
2) INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2
Description : INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2()
Specification : AS PER DRG.
C
Estab
3) INVESTMENT CASTING TO DRG NO SKM 753 3 FOR REAR SIGHT RAMP
Description : INVESTMENT CASTING TO DRG NO SKM 753 3 FOR REAR SIGHT RAMP()
Specification : INVESTMENT CASTING TO DRG NO.SKM-753*3 FOR REAR SIGHT RAMP.
C
Estab
4) IC BODY COCKING for MAG
Description : IC BODY COCKING for MAG()
Specification : I.C BODY COCKING SLIDE SKM-738*4
C
Estab
5) INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.
Description : INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.()
Specification : AS PER DRG.
C
Estab
6) IC OF BRACKET CARRYING HANDLE DRG No. 752*2
Description : IC OF BRACKET CARRYING HANDLE DRG No. 752*2()
Specification : AS PER DRG.SKM-752*2
C
Estab
7) IC SKM 754 2 FOR KNOB GAS REGULATOR SCREW
Description : IC SKM 754 2 FOR KNOB GAS REGULATOR SCREW()
Specification : I.C.SKM-754*2 FOR KNOB GAS REGULATOR SCREW
C
Estab
Category : p
Grade : 1
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) C5089 CATCH BODY FULLY FINISHED THROUGH IC DRG 64C 5089 250 H3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
2) C5014 CARRIER FULLY FINISHED THROUGH IC DRG 64C 5014 250 I3 ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
3) MANUFACTURING AND SUPPLY OF HOLDER IN FULLY FINISHED CONDITION TO DRG NO C2026 DS CAT NO 1005 5650452 THROUGH CASTING ROUTE WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BODY IC of REVOLVER MK III DRG NO SK 5375R3
Description : BODY IC of REVOLVER MK III DRG NO SK 5375R3()
Specification : BODY(IC) OF REVOLVER MK-III DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08
C
Estab
2) INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09
Description : INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09()
Specification : AS PER DRG.
C
Estab
3) HAMMER IC FOR REVOLVER MK III
Description : HAMMER IC FOR REVOLVER MK III()
Specification : HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,
C
Estab
4) PLATE BODY IC OF REV MK III
Description : PLATE BODY IC OF REV MK III()
Specification : PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R*1
C
Estab
5) INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10
Description : INVESTMENT CASTING FOR CAM CYLINDER TO DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 1
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Steel Investment Casting for CAP for Carbine 9mm
Description : Steel Investment Casting for CAP for Carbine 9mm()
Specification : STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1
1) 9069112584 BEARING TO DRG NO BOF 6112469 OR IMB 429CN[90]()
Specification : BEARING TO DRG NO BOF 6112469 OR IMB 429CN
C
Nonestab
2) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) MACHING OF TRAVERSING NUT()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
2) MACHINING OF HALF UPPER COLLER()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
Category : DDP,DP
Grade : I,II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ARM LEFT[AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS]()
AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
C
Not Established
2) MACHING OF TRAVERSING NUT[As per GCF Spcn./Drg./Size & requirements]()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
3) MACHINING OF HALF UPPER COLLER[As per GCF Spcn./Drg./Size & requirements]()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
Category : DDP,DP
Grade : I,II
Size :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) PLUG GLAND EXTENSION (EQUILIBRATOR) TO DRG. NO. 1015-000435[90]()
Specification : PLUG GLAND EXTENSION (EQUILIBRATOR) TO DRG. NO. 1015-000435
C
Nonestab
2) PLUG TO DRG. NO. 1015-000547[90]()
Specification : PLUG TO DRG. NO. 1015-000547
C
Nonestab
3) PLATE MOUNTING RESISTOR ASSY. TO DRG. NO. 5905-024842[90]()
Specification : PLATE MOUNTING RESISTOR ASSY. TO DRG. NO. 5905-024842
C
Nonestab
4) PIN SHOULDER TO DRG. NO. 5315-001003[90]()
Specification : PIN SHOULDER TO DRG. NO. 5315-001003
C
Nonestab
5) NUT, CLAMP (MACHINING) TO DRG. NO. 5310-006006[90]()
Specification : NUT, CLAMP (MACHINING) TO DRG. NO. 5310-006006
C
Nonestab
6) LEVER TO DRG. NO. DS CAT - 1015-000771[90]()
Specification : LEVER TO DRG. NO. DS CAT - 1015-000771
C
Nonestab
7) SPINDLE TO DRG. NO. CM-3342[90]()
Specification : SPINDLE TO DRG. NO. CM-3342
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SPACER TO PART NO 5050983[90]()
Specification : SPACER TO PART NO 5050983
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) BLOCK AS PER DRG.NO.MCT-3283 FOR COLLIMETER INFINITY 102 A.()
As per required Specification
C
Not Estab.
2) RING RETAINING DRG.NO. MCT-2959/1.()
As per required Specification
C
Not Estab.
3) CELL EP DRG.NO.CWC/229/35/1.()
As per required Specification
C
Not Estab.
4) SECURING RING DRG.NO.CWC/229/56/1 FOR II TUBE.()
As per required Specification
C
Not Estab.
5) GRATICULE RING DRG. NO.CWC/229/67/2.()
As per required Specification
C
Not Estab.
6) STUD LOCK PIN FASTNERS ECCENTRIC TO DRG. MCT-3092.FOR MT.TELE.102A.()
As per required Specification
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Adapter Bush()
As per Drg. & Specification
C
Not Established
2) Machining of Lifting Plug()
As per Drg. & Specification
C
Not Established
3) Machining of 25LBS Bomb Body()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : I,II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SHOOTING REST FOR JVPC TO DRG. NO. 0204-03-02-00-00-000-00AA()
AS PER DRG.
C
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Primer Magazine ()
Part No. 1165150
C
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
E
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
2) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
3) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
4) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
5) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
6) ARM TO DRG NO D 4081495[63]()
Specification : ARM TO DRG NO D 4081495 REVISION A FOR DHANUSH
C
Nonestab
7) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
8) HOLDER AS PER DRG NO D 4078830[63]()
Specification : HOLDER AS PER DRG NO D-4078830 REV B FOR DHANUSH ORDNANCE
C
Nonestab
9) Lanyard Short to Drg No 161 1292[63]()
Specification : As per Drg. No. 161-1292
C
Nonestab
10) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
11) Hand Rammer to part no 166 282[63]()
Specification : As per Part No. 166-282
C
Nonestab
12) Brush primer as per drg no 161 1390[63]()
Specification : as per drg no 161 1390
C
Nonestab
13) Pressure Plate Fasten Fixture to Part No 166 617[63]()
Specification : As per Part No 166-617
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) HOLDING ARRANGEMENT TO DRG NO COT SK 2867[63]()
Specification : Kindly visit www.ofbeproc.gov.in
C
Nonestab
2) Finish machining of slider[63]()
Specification : Finish machining of slider to drg no D-3053053 Rev A as per specn. no. 003/OFC/GS-II/Machining dt 05/02/2019
C
Nonestab
3) Finish Machining of Frame[65]()
Specification : Finish Machining of Frame to drg no D-4081488 Rev A as per specification no 003/OFC/GS-II/Machining dt 5/02/2019 for Dhanush Ordnance
C
Nonestab
4) Finish Machining of Actuating Cylinder[65]()
Specification : Finish Machining of Actuating Cylinder to Drg. No. D-3053026 Rev A as per specification 002/OFC/GS-II/Machining dt. 05/02/2019 for Dhanush Ordnance.
C
Nonestab
5) ARM AS PER DRG NO D 4083347[63]()
Specification : ARM AS PER DRG NO D 4083347 REV A FOR DHANUSH ORDNANCE
C
Nonestab
6) ARM TO DRG NO D 4081495[63]()
Specification : ARM TO DRG NO D 4081495 REVISION A FOR DHANUSH
C
Nonestab
7) RACK HOUSING TO DRG NO 176 8141[63]()
Specification : As per Drg No 176 8141
C
Nonestab
8) HOLDER AS PER DRG NO D 4078830[63]()
Specification : HOLDER AS PER DRG NO D-4078830 REV B FOR DHANUSH ORDNANCE
C
Nonestab
9) Lanyard Short to Drg No 161 1292[63]()
Specification : As per Drg. No. 161-1292
C
Nonestab
10) LUBRICATING HEAD TO PART NO 161 1387 AND PULLING BACK DEVICE TO DRG NO 176 1475[63]()
Specification : FOR MORE TENDER RELATED DETAIL VIST WWW.OFBEPROC.GOV.IN
C
Nonestab
11) Hand Rammer to part no 166 282[63]()
Specification : As per Part No. 166-282
C
Nonestab
12) Brush primer as per drg no 161 1390[63]()
Specification : as per drg no 161 1390
C
Nonestab
13) Pressure Plate Fasten Fixture to Part No 166 617[63]()
Specification : As per Part No 166-617
C
Nonestab
14) Housing as per drg no D 4077841 Rev A for Dhanush Ordnance[63]()
Specification : as per drawing
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LEVER TO PART NO 6121855[90]()
Specification : LEVER TO PART NO 6121855
C
Nonestab
2) LEVER VSG TILTING BOX TO PART NO BOF 5050320[90]()
Specification : LEVER VSG TILTING BOX TO PART NO BOF 5050320
C
Nonestab
3) LEVER TO PART NO BOF 5050320 2[90]()
Specification : LEVER TO PART NO BOF 5050320 2
C
Nonestab
4) 9069112695 LEVER RIGHT TO PART NO BOF 5047788[90]()
Specification : 9069112695 LEVER RIGHT TO PART NO BOF 5047788
C
Nonestab
5) 9069112518 LEVER TO DRG NO BOF 6112228[90]()
Specification : 9069112695 LEVER RIGHT TO PART NO BOF 5047788
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CASE OF FIRING UNIT ()
AS PER DRG. NO. 3053014
E
Estab.
2) FINISH MACHINE OF BREECH CARRIER()
AS PER DRG. NO. 2025298
E
Estab.
3) PRE-MACHINING OF FRAME()
AS PER DRG. NO.4081488 FG-510476
E
Estab.
4) PRE-MACHINING OF SLIDER()
AS PER DRG. NO. 3053053
E
Estab.
5) ASSY. OF PRIMER MAGAZINE()
AS PER PART NO. 1165150 FOR 155 FH GUN
E
Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) DIP STICK LIQUID QUANTITY TO DRG. NO. 6680-000480[90]()
Specification : DIP STICK LIQUID QUANTITY TO DRG. NO. 6680-000480
C
Estab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) CATCH LOCKING TO PT NO BOF 6125531[90]()
Specification : CATCH LOCKING TO PT.NO.BOF-6125531
C
Estab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) SEATING SPRING TO PART NO 6118954[90]()
Specification : SEATING SPRING TO PART NO.6118954
C
Estab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) VALVE SEATING TO DRG NO BOF 6115657[90]()
Specification : VALVE SEATING TO DRG NO BOF-6115657
1) 9910448016 LEVER CONTROL HAND 2530 017684 ILG 1917 2530 017684[90]()
Specification : 9910448016 LEVER CONTROL HAND (2530-017684), ILG-1917/2530-017684
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9080081598 VALVE ASSEMBLY TO PART NO 1015 000639 IFL 849SA[90]()
Specification : VALVE ASSEMBLY TO PART NO.1015-000639/IFL 849SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB[90]()
Specification : 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112496 HOUSING TO DRG NO BOF 3012784[90]()
Specification : 9069112496 HOUSING TO DRG.NO.BOF-3012784
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
[ENR Registration]
Name
Specification
Use
Status
1) Machining of cylinder by trade outside GIF premises
Description : Machining of cylinder by trade outside GIF premises()
Specification : Job contract for carrying out machining of cylinder as per drawing No. AAIW/BS-0069 outside GIF premises as per special terms and conditions in Annexure A with general terms and conditions
DRG.NO.QX-175 DC NO:36103-A,DT.29.03.96 [ MATERIAL:GLAZE BOARD TO JSS-8135 -13-2014 Rev 3 5257-ME ,DT-18.06.14 OR CARTON BOARD TO JSS-8135-15-2010 REV-2 , DC NO . 4066 ME , DT-19.07.10
C
Not Estab.
2) DISC MAGAZINE ()
DRG.NO.QX-211DC NO-35703-A, DT.03.05.94 FOR FUZE 117 MK-20
C
Not Estab.
Category : P
Grade : II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) COLLAR FOR PACKING OF 105 MM IFG NC()
ISV 1376
C
Estab
2) AMMUNITION CONTAINER 39A/L()
ISV 414A
C
Estab
3) AMMUNITION CONTAINER 40A/L()
ISV 415A
C
Estab
4) AMMUNITION CONTAINER 53 A/L()
ISV 463A
C
Estab
5) AMMUNITION CONTAINER 66A()
ISV 518A
C
Estab
6) PAPER CRAFT AMMUNITION()
JSS 8135 017 2002
C
Estab
7) PAPER LAMINATED GRADE I()
IND/ ME /786 (C)
C
Estab
8) PAPER LAMINATED GRADE III SIZE 914MM WIDE x 0.65 TO 0.73 MM THICK()
IND/ME /786 (C)
C
Estab
9) PAPER LAMINATED GRADE III SIZE 127MM WIDE x 0.65 TO 0.73 MM THICK()
IND/ME/786(C)
C
Estab
10) PAPER LAMINATED GRADE II 914MM WIDE()
IND/ME/786 (C)
C
Estab
11) SLEEVE B FOR PACKING OF FUZE 162()
PROP/SK -294
C
Estab
12) 6580853267- AMMUNITION CONTAINER 63A()
DRG. NO. ISV 506A
E
Established
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DISC()
DRG. NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.
C
Not Estab
2) DISC, PWF 12.7MM DIA()
JSS-9310-06:2002, REAFD.2011 DC NO.5044 ME, DT.15.12.11 AS PER DRG. NO.IQX-144-GF, ITEM NO.4.
C
Not Estab
3) PAPER CARTON BOARD ()
JSS: 8135-15-2010, REV.NO.2 DC NO.4066 ME, DT.19.07.10 WITH CUPPING QUALITY SIZE: 760MM*890MM*0.762MM THICK.
C
Not Estab
4) AMMN. CONTAINER 39 A/L ()
DRG. PART NO-ISV-414 A, DC NO-36411-A DT.23.04.98, SPECN: CQA(A) 2805 (H) DC:36145-A .
C
Not Estab
5) PAPER WRAPPING WAXED KRAFT AMMN.(BROWN)()
JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE:482*635*0.15 to 0.18 MM (T).
C
Not Estab
6) DISC PAPER WHITE FINE, 30.99MM DIA ()
MATERIAL:-PAPER WHITE FINE AMMN.TO JSS: 9310-06:2002, DC:5044-ME, DT.15.12.11 REAFFIRMED 2011 SUBSTANCE-42-46 GSM) FOR CE PELLET MK 1/1/L, 53.16 GRAM TO DRG. NO.SX 12 AF.
C
Not Estab
7) DISC, 45.2MM DIA, PAPER WHITE FINE AMMN ()
JSS:9310-06:2011, DC: 5044 ME, DT.15.12.2011 TREATED WITH NC LACQUER AND DUSTED WITH FRENCH CHALK. REF. DRG.NO.CIA/AMN/2176, PART NO-ISX-77 GF, ITEM NO-3, DC:37013-A, DT.06.05.2005
C
Not Estab
8) MILL BOARD DISC ()
SIZE: 93MM DIA x3MM THICK (WAXED), DRG. NO:CIA/AMN/2650,DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013 MATERIAL: MILL BOARD TO JSS: 9310-01-2014-Rev-3 DC-5290 ME DT.04.02.2013.
C
Not Estab
9) TUBE, PAPER()
DRG. NO.ISX 18 SA DESIGNERS REF NO-CIA/AMN/1900. DCI 35462-A DT.03.03.93
C
Not Estab
10) DISC ()
DRG. CIA/AMN/1901 DETAIL.2 PART NO: IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. [MATERIAL:PAPER WHITE FINE TO SPECN.JSS 9310-06:2002 REAFFIRMED 2011]
C
Not Estab
11) DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD ()
JSS:8135-13:2014, REV-3,DC:5257-ME, DT.18.06.14 PA 1992 WAXED (REF: DESIGNERS REF. NO.CIA/AMN/2176, PART NO.ISX-77GF, ITEM NO-9 DC:37013-A, DT.06.05.2005)
C
Not Estab
12) DISC PAPER WRAPPING HARD, 30.99 MM DIA. MATERIAL-PAPER CRAFT AMMN. ()
SPECIFICATION JSS: 8135-017:2010, DC-5016-ME DT.16.03.2011 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO.35452-A DT.07.09.93.
C
Not Estab
13) AMMN. CONTAINER 40A/L()
DRG. PART NO ISV-415A, DC NO: 35975-A DT.14.07.95 SPECN: CQA(A) 2805 (H), DC NO.36145-A .
C
Not Estab
14) COLLAR()
DRG. PART NO.ISV-1376, DC NO.34844-A DT.09.04.90
C
Not Estab
15) DISC(WAXED)128MM DIA x 6MM THICK WAXED ITEM NO-5 ()
PART NO.ISV-338 GA. DCI 35574-A Dt.3.9.93 MATERIAL-MILL BOARD TO SPEC JSS 9310-01-1994 REV-1 DC.3279-ME 21.02.95
DRG PART NO:ISV-483 GA. DCI NO. 35983-A DT.29.7.95 MATERIAL: MILL BOARD TO JSS:9310-01-1994, DC NO:3279-ME DT.21.02.1995
C
Not Estab
17) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 ()
DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95
C
Not Estab
18) WASHER FOR FUZE DA 5A()
DRG.NO.QX176FD-650, DC-35781-A DT.22.08.94.
C
Not Estab
19) GLAZED BOARD WASHER()
DRG. NO.FD672 TO DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96
C
Not Estab
20) STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE 42-46 GSM ()
JSS-9310-06:2002 (REAFFIRMED 2011).
C
Not Estab
21) RING()
DRG. NO.1933 DET. NO.6 TO PT. ITV 172. DC-36529-A DT.18-02-99.
C
Not Estab
22) CARTON BOARD SIZE (260X70X0.51) MM ()
JSS 67-07:APR 65.(ONE SIDE WHITE) DC NO.3253-ME DT.14.01.95.
C
Not Estab
23) BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM ()
JSS:8135-13:2014 REV-3 DC.NO.5257 ME DTD.18.06.14.
C
Not Estab
24) DISC D=18B7MM X 0.5 TO 0.9 MM THICK ()
MATERIAL SPECN. TO GOST: 21641-76 OR MILL BOARD TO JSS-9310-01: 2014 , REV-3, DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN.JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME, DT. 12.3.99 REF DRG.NO.4-027043 P-A00E14-79 3EP4000 FOR AP/T & 4-027044 30P
C
Not Estab
25) PAPER BROWN (WAXED), 280*195(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-2013-REV.4 DC-5186-ME DT.19.03.14.
C
Not Estab
26) PAPER TUBE (AP/T) ID=17A5mm X OD=18.1C5mm X L=19.5B8Amm ()
MATERIAL SPECN.PAPER CRAFT AMMN.TO JSS 8135-017:2002, DC NO.3731-ME, DT-16.5.2002.
DRG NO.bW8.685.066-01(3-0116278), DCI NO.34183-A, DT-28.7.87. MATERIAL WRAPPING PAPER TO SPEC. GOST-8273-75, GSM 60-120/JSS 8135-017:2002, DC NO. 3731-ME/16.05.2002.
C
Not Estab
30) PAPER BROWN (WAXED), 320*280(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-1994, DC NO.3732-ME DT.16.05.2002.
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
R
Estab
6) MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)[14]()
Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA
R
Estab
7) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313[14]()
Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16
R
Estab
Category : P
Grade : I
Size :
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313
Description : PAPER CRAFT 482 X635X125 SUBSTANCE LF 1412402313()
Specification : PAPER KRAFT AMMN SIZE 482.6 X 635 MM WIDTH BURSTING STRENGTH 308.9 kpa SUBSTANCE 125+/-5 g/m2 TO SPECN:-JSS-8135-17-2016 (REVISION NO.1) DC NO. 5493-ME DT.24/09/16
C
Nonestab
2) PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178
Description : PAPER LAMINATED GR1 0 25 TO 0 33MM LF 1410017178()
Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.
C
Nonestab
3) PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676
Description : PAPER LAMINATED GR2 0 45 TO 0 53MM LF 1410017676()
Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.
C
Nonestab
4) PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515
Description : PAPER WHITE FINE 51X76CMSX42 46 GSM LF 1415364515()
Specification : PAPER WHITE FINE AMMN. 51X76CMS X 42-46 GSM SPECN: JSS-9310-06:2002 (REAFF.2011) DC NO 5044-ME DATE - 15/12/2011.
Specification : BOARD GLAZED CALENDERED AMMN. SIZE 914.4mm x304.8mm x0.508mm +/- 0.051 mm THICK TO SPECN:- JSS-8135-13:2014 REVISIONNO.3
C
Nonestab
6) PAPER BOARD CORRUGATED LF 1411817752
Description : PAPER BOARD CORRUGATED LF 1411817752()
Specification : PAPER AND BOARD CORRUGATED AMMN. DOUBLE FACED, FINE FLUTE, TO SPECN:- JSS-8135-08:1998 (REVISION NO.-2) DC NO.3753-MEDT.12-12-2002 TO SIZE 787.4 mm X 558.8 mm X 2.5 MM THICK.
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113807 LAMINATED PAPER CONT 120FSAPDS MKII[65]()
Specification : LAMINATED PAPER CONTAINER FOR 120MM FSAPDS MK-II TO ARDEDRG.NO. 1006 05 15 00 00 000 00TA (DOCUMENT NO.DRDO-ARDE-DOA-SPEC-247-2018)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6581233026 END CAP FOR CONTAINER 40A TO DRG PT NO ISV 1123 SHEET STRIP TO SPECN NO IS 1079 2017 OR IS 513 2008 OR BS 1449 PT 381968 CS4 OR BS 1449 PT 3A 1964 HS4A[65]()
Specification : END CAP FOR CONTAINER 40A TO DRG.PT.NO.ISV 1123 SHEET/STRIP TO SPECN. NO.IS 1079:2017 OR IS 513:2008 OR BS 1449 PT 381968-CS4 OR BS 1449 PT 3A-1964-HS4A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113920 LAMINATED PAPER CONTAINER FOR 120MM HESH DRG NO 1006 05 15 00 00 000 44TA[65]()
Specification : LAMINATED PAPER CONTAINER FOR 120MM HESH.DRG NO.:1006 05 15 00 00 000 44TA.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
[ENR Registration]
Name
Specification
Use
Status
1) Paper Liner for Packing 68mm Arrow Charges
Description : Paper Liner for Packing 68mm Arrow Charges()
Specification : PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.
R
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) INSERT TO DRG.NO.4-24929/3 K33/040
Description : INSERT TO DRG.NO.4-24929/3 K33/040()
Specification : INSERT TO DRG.NO.4-24929/3 K33/040 DC NO.36875-A, dt.27.12.02.PART DRG NO.TUBE TO DRG NO 4-24929/3RK33/017 DC NO.36891-A Dtd.05-04-03,TUBE TO Drg No 4-24929/3RK33 /019 DC No 34147-A Dt.04.06.87
C
Estab
2) CYLINDER TO DRG.NO.BL/CD/CC-130/035
Description : CYLINDER TO DRG.NO.BL/CD/CC-130/035()
Specification : CYLINDER TO DRG.NO.BL/CD/CC-130/035DT.16.04.2001.(REF.DRG.NO:3-022483/54-bH-482/13, DC NO:36134-A, DT.04.07.96 NOTE:TO BE SUPPLIED AS PER SMALL CYLINDER OF SIZE:LENTH:50MMx ID:115MM.
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) PAPER KRAFT AMMUNITION[14]()
Specification : PAPER KRAFT AMMN. 580 X 530 X 0.5 MM TO SPCN. JSS 8135-017: 2016 (REV. NO.1) for CHEM PARAMETERS.THE PHY&MECH PARAMETERS A) SUBTANCE g/m2-350 35.B)THICKNESS(MM)-0.5 0.05.C) MIN. BREAKING LOAD NEWTON MD-270,CD-160,D)BURSTING STRENGTH MIN -
R
Nonestab
2) Paper Liner for Packing 68mm Arrow Charges[14]()
Specification : PAPER LINER FOR PACKING 68 MM ARROW CHARGES AS PER SPECN. IA/918 C-(g) DC (I) 33749-A AND DRG.NO.ARM-1503-C.
R
Nonestab
3) Piece Packing Mill Board[25]()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
R
Nonestab
4) PAPER WRAPPING WAXED CRAFT AMMUN[14]()
Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05-2013 REV.NO 4, DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
R
Nonestab
5) PAPER WHITE FINE AMMUN[14]()
Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
R
Nonestab
6) PAPER WASHER GLAZED BOARD[64]()
Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
R
Nonestab
7) PAPER CORRUGATED AMMUNITION[14]()
Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.
2) Machining of jobs up to dia 100mm length 0.8 mtr. max. 250*205*250mm including ferrous & Non ferrous metal alloys()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
3) Jigs & Fixtures up to max. weight 100 Kgs.()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
4) Fasterners (Non Standards)()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
5) Flow Form Tubes & components upto 650 mm dia max. length 4500 mm()
As per GCF Spcn./Drg./Size & requirements
C
Not Established
Category : P
Grade : II
Size :
S
1) Metal and Steel Factory
Name
Specification
Use
Status
1) MS Starter Plate size 20mm X 1000mm X 1200mm. Fully Machined as per Drg. & fitted with Boss 03 No. in each plate()
As per MSF Drawing No. ESR/1000/03
R
Not Estab.
2) Steel Blank to size 125mm X 125 mm X 3.15 (+/- 0.05mm) Thick()
Steel Specification : IS 513/1994 Grade-DD (Deep Drawn Quality) with best surface finish condition
R
Not Estab.
Category : P
Grade : I
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) steel tube OD 159[03]()
Specification : steel tube OD 159 + 1.0/-0.6 mm, ID = 132.8 + 0.6/-1.0 mm, length = 700 +/- 2.0 mm as per specn: BS 970 GR 817 m 40 (EN24) for AFT Motor of RGB 60 EN24
R
Nonestab
2) STEEL TUBE FOR INNER CYLINDER OF RGB 60[03]()
Specification : STEEL TUBE SPCN:BS 970 GR 817 M 40(EN24) OD=159.0 +/-0.6MM, ID=132.8+/0.6MM,LENGTH=170.0+/-2MM,OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM FOR INNER CYLINDER OF RGB60
R
Nonestab
3) STEEL TUBE FOR CF MOTOR OF RGB 60[03]()
Specification : STEEL TUBE AS PER SPCN:BS 970 GR 817 M 40(EN24)
SIZE:OD 180 (+0/-2.0)MM, ID 155(+2.0/-0)MM IN THE LENGTH OF 2M OR ITS MULTIPLES FOR CF MOTOR OF RGB 60
R
Nonestab
4) STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER[03]()
Specification : SUPPLY OF STEEL TUBE FOR RGB 60 TAIL OUTER CYLINDER AS PER SPECIFICATION: BS 970 GR 817 M 40(EN 24) OD=219+/-0.7MM,ID= 199.8+/-0.6MM,LENGTH=215.0 +/-2MM OR ITS MULTIPLES BUT LENGTH NOT TO EXCEED 3000MM
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Opto Electronic Factory
Name
Specification
Use
Status
1) LENS-1 AS PER DRG NO 096701030000027 (LF 2690000157)[26]()
Specification : LENS-1 AS PER DRG NO 096701030000027 (LF 2690000157)
C
Estab
2) LENS-2 AS PER DRG NO 096701030000025 (LF 2690000158)[26]()
Specification : LENS-2 AS PER DRG NO 096701030000025 (LF 2690000158)
C
Estab
3) LENS-3 AS PER DRG NO 096701030100012 (LF 2690000159)[26]()
Specification : LENS-3 AS PER DRG NO 096701030100012 (LF 2690000159)
C
Estab
4) LENS-4 AS PER DRG NO 096701030100011 (LF 2690000160)[26]()
Specification : LENS-4 AS PER DRG NO 096701030100011 (LF 2690000160)
C
Estab
5) LENS-5 AS PER DRG NO 096701030200037 (LF 2690000161)[26]()
Specification : LENS-5 AS PER DRG NO 096701030200037 (LF 2690000161)
C
Estab
6) LENS-6 AS PER DRG NO 096701030200035 (LF 2690000162)[26]()
Specification : LENS-6 AS PER DRG NO 096701030200035 (LF 2690000162)
C
Estab
7) HEAD WINDOW(THERMAL) AS PER DRG NO 096702000000072 (LF 2690000163)[26]()
Specification : HEAD WINDOW(THERMAL) AS PER DRG NO 096702000000072 (LF 2690000163)
C
Estab
8) FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164)[26]()
Specification : FRONT THERMAL WINDOW COMMANDER'S CUPOLA(FINISHED) AS PER DRG NO 096700000000088 (LF 2690000164)
C
Estab
9) HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165)[26]()
Specification : HEAD MIRROR(THERMAL) FINISHED AS PE DRG NO 096702000000070 (LF 2690000165)
C
Estab
10) 6.5" TFT Monitor part no. C-VIEW 0610 (LF 9001121274)[74]()
Specification : 6.5" TFT MONITOR PART NO. C-VIEW 0610 WITH COVER (DRG. NO. OLF/R&D/CTI-T-72/039) OVER TFT MONITOR.
C
Estab
11) TI WINDOW FOR DTI OF T-90 TANK (LF-2690000177)[26]()
Specification : AS PER DRAWING NO.138100000201 G12
C
Estab
12) 7441121722 POWER SUPPLY CARD AS PER ATTA[74]()
Specification : POWER SUPPLY CARD AS PER ATTA.
C
Estab
13) 2612884803 MOULD OF GERMANIUM WINDOW[26]()
Specification : MOULD OF GERMANIUM WINDOW / OPT/MISC/476M1
C
Estab
14) 2690000171 LENS 1 FOR DTI[26]()
Specification : LENS-1 FOR DTI OF T-90 / 138100000201 G07
C
Estab
15) 2690000173 LENS 3 FOR DTI OF[26]()
Specification : LENS-3 FOR DTI OF T-90 / 138100000201 G09
C
Estab
16) 2690000172 LENS 2 FOR DTI[26]()
Specification : LENS-2 FOR DTI OF T-90 TANK / 138100000201 G08
C
Estab
17) 9927098596 COATING ON GE LENS[99]()
Specification : COATING ON GE LENS OF TI-ESSA / MRS5000061
Drg. No.9-04367/9 - - 104/38.316.101, DC No.36309-A, Dt.14.07.97
C
Not Estab.
2) WASHER ALUMINIUM,OD:7.62MM +/-0.05 ID:5.08+/-0.13MM, THICKNESS;0.64MM TO 0.51MM ()
DRG.NO.FD-650 PART NO.QX-176,DC NO.35781-A,DT.02.07.2014
C
Not Estab.
3) WASHER GLAZED BOARD ()
Drg. No.QX-175, DC No.36103-A, Dt.29.03.96 [ MATERIAL:GLAZE BOARD TO JSS-8135 -13-2014 Rev 3 5257-ME ,DT-18.06.14 OR CARTON BOARD TO JSS-8135-15-2010 REV-2 , DC NO . 4066 ME , DT-19.07.10
C
Not Estab.
4) SCREW SET SLOTTED HEAD, FULL DOG POINT NO.2BA ()
Designer’s Ref. No.CIA/AMN/885, DC No.33833-A, Dt.19.12.87
C
Not Estab.
5) WASHER DETAIL 54 ()
DRG.NO.3-016919/53-B-025 Y FOR FUZE B429E.DC-37284A DT.06.07.11
C
Not Estab.
Category : P
Grade : III
Size :
S
1) Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) DIOPTER RING
Description : DIOPTER RING()
Specification : DIOPTER RING TO DRG NO. GCF/50/39214
C
Estab
2) RAMMER HEAD
Description : RAMMER HEAD()
Specification : AS SPECIFIED IN DRAWING
C
Estab
3) COVER RING TO DRG NO A 51203 73
Description : COVER RING TO DRG NO A 51203 73()
Specification : COVER/ RING TO DRG NO A 51203-73
C
Estab
4) Small & Medium Size Components
Description : Small & Medium Size Components()
Specification : As per GCF/Drg/Size/Specn/IS
C
Estab
5) Pullers
Description : Pullers()
Specification : AS PER GCF /DRG/SPECN/IS/BS
C
Estab
6) All Steel Ring & Flanges
Description : All Steel Ring & Flanges()
Specification : AS PER GCF /DRG/SPECN/IS/BS
C
Estab
Category : p
Grade : 3
Size :
O
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) SUPPORTING RING FRONT
Description : SUPPORTING RING FRONT()
Specification : DET.8 TO DRG NO.ARDE-2139
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) SUPPORTING RING FRONT
Description : SUPPORTING RING FRONT()
84MM TPT PROJECTILE FFV-65 (W/O TRACER-56D) TO DRG. NO F1301-047300 R DC NO. 36598-A DT 23/09/99
C
Nonestab
16) ALUMINIUM DISC, THICK .05 MM, DIA 10MM (9911357960)()
ALUMINIUM (DISC) COVER THICKNESS = 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93
C
Nonestab
17) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)()
SHELL BODY BLANK (INTERNAL OPERATION)TO O.F.KHAMARIA DRG NO.TRD-839 (L)
C
Nonestab
18) CAP AND BOTTOM SPECN F1301-905060-P (9911350158)()
CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 &BOTTOM TO DRG NO F1301-029650-EDC NO. 36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91
C
Nonestab
19) BODY ASSY-4-26941-060 FOR (81MM SMK) (9911355970)()
BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87
C
Nonestab
20) PLUG LAUNCHER PED 902-01-401 (9911356473)()
PLUG (LAUNCHER PAD) TO DRG NO. 902-01-401DC-17988-W DT. 20-06-1994. SPECN.:-IND/ME/914 (PROV) DC-3496-ME DT. 06-02-98 GRADE C OR D HARDNESS 55 TO 70
C
Nonestab
21) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)()
TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY)TO DRG PT NO. IQX-69GE DC NO. 36650-A DT. 26/2/00 SPECN:- F-1301-910540-K (CQA-0910) DC36613-A DT 11/11/99
C
Nonestab
22) SAFETY LOCK ASSY -042-512 CB (9911356455)()
SAFETY LOCK ASSEMBLY TO DRG NO. bw6-042-512-C6 DC NO -34241-A DT 24/9/87
Specification : AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243.
C
Estab
4) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
C
Estab
5) VALVE DRG NO.5209565 FOR 84HEAT-551 (9911357921 )[99]()
Specification : VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247.
C
Estab
Category : ddp
Grade : Grade III
Size :
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : CQA (A) 2316
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]()
Specification : SPECN. NO. CQA(A) 0917
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6541325748 TUBE FIRE TRANSMITTING FOR 81 MM[65]()
Specification : FIRE TRANSMITTING TUBE TO DRAWING PART NO.IRW 115,DC 37103-A DTD.02.04.2007 FOR 81MM AMMUNITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6380130100 PRIM ELE 1A/L(E) CARTG.105MM IFG SC[63]()
Specification : PRIMER ELECTRIC 1A/L EMPTY
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Nonestab
2) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE[63]()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354[99]()
Specification : EMPTY ASSY.FUZE B-25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SELF TAPPING SCREW DRG 121932.[99]()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300[99]()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
2) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932
C
Nonestab
3) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
C
Nonestab
4) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385[99]()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
C
Nonestab
5) PYRO DELAY TUBE EMPTY LF 9911358384[99]()
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
C
Nonestab
6) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
7) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.[63]()
Specification : NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. TO CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) VALVE PART NO 404038806 LF 9911358407
Description : VALVE PART NO 404038806 LF 9911358407()
Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547
2) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY
Description : 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY()
Specification : SPECN. NO. CQA(A) 0917
C
Estab
3) 6330130100 FZ 117 DA MK 20 E WITH CAP
Description : 6330130100 FZ 117 DA MK 20 E WITH CAP()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Estab
4) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE
Description : 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
1) WASHER TO DRG NO 219 35 186 TRACK T 90 L F NO 6120100106[61]()
Specification : WASHER TO DRAWING NUMBER 219.35.186 {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 19903-74,GOST 1577-93,GOST 14959-79,520 TY 1 PROCESS SHEETS-COLD STAMPING, ISOTHERMAL HARDENING.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) WINCH TO DRG No AK 630 Yu SB 3
Description : WINCH TO DRG No AK 630 Yu SB 3()