Specification : DESIGNERS REF CIA/AMN/1180 PART NO.ISV 357 A
C
Nonestab
6) BOX M 104 MK1 PAINTED OLIVE GREEN[65]()
Specification : IA 1169
C
Nonestab
7) BOX B 184 MK 1 W/O SEPARATOR[65]()
Specification : IA 1169
C
Nonestab
8) AMMN.CONTAINER BOX B-9 A[65]()
Specification : IA 1169
C
Nonestab
9) BOX G 70 MK1(STEEL)OLIVE GREEN.[65]()
Specification : IA 1169
C
Nonestab
10) BOX H2A DRG.CIA/AMMN/468[65]()
Specification : IA 1169
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) UNIT AUTO ASSY DRG NO SK 2825 62
Description : UNIT AUTO ASSY DRG NO SK 2825 62()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Spring Locking Pin Trigger Front
Description : Spring Locking Pin Trigger Front()
Specification : SPRING LOCKING PIN TRIGGER FRONT & PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-004- 00DA.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Bayonet for JVPC[70]()
Specification : Bayonet for JVPC 5.56 X 30MM Drg.No. 0204 04 02 00 00 000 00DA (I/Code-7012470194)
C
Nonestab
2) Blank for Piston extension stage VI[01]()
Specification : Blank for Piston Extension (Stage VI) to Drg.No. SKJVPC 730* for JVPC 5.56MM Note:-Raw material will be supplied by SAF on freight to pay basis against the B/G through L.F.NO.0412001042. (I/Code-0132089519)
C
Nonestab
3) ROD COCKING FOR JVPC[70]()
Specification : Rod Cocking for JVPC drg. No. 0204.03-04-00-01-012-00DA (I/Code-7012470462)
C
Nonestab
4) 3 Point Sling for JVPC[70]()
Specification : 3 Point Sling for JVPC 5.56MM Drg.No.204-04-03-00-00-000-00DA (I/Code-7012470197)
Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA
C
Nonestab
7) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) Apparatus Cable Laying()
As per GCF requirement , Drg , Size, Spcn.
C
Established
2) Lever Left()
As per GCF requirement, Drg. Size Spcn.
C
3) Lever Right()
As per GCF requirement, Drg., Size, Spcn.
C
4) Cartidge Left with pin()
As per GCF requirement, Drg., Size, Spcn.
C
5) Ejector()
As per GCF requirement, Drg., Size, Spcn.
C
6) Catch Right with pin()
As per GCF requirement, Drg. Size, Spcn.
C
7) Bracket A-1 & A-2()
As per GCF requirement, Drg. Size, Spcn.
C
8) Bottom Support Piece()
As per GCF requirement, Drg. Size, Spcn.
C
9) Channel Support Piece()
As per GCF requirement, Drg., Size, Spcn.
C
10) Bracket B-2()
As per GCF requirement, Drg., Size, Spcn.
C
Category : P
Grade : III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576-A.AIDE MEMOIRE-P
C
NOT ESTABLISHED
2) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)()
CARRIER-4A/L (STEEL) TO DRG.PT.NO. ISV-335A DC (I) NO. 33739-A DT. 30/03/85 TO SPECN: IA 1169(n) DC NO. 35576-A AIDE MEMOIRE P/11 AND CARRIER-5A/L (STEEL) TO DRG. PT.NO. ISV-336A DC (I) NO. 33739-A DT. 30/03/85 TO SPECN: IA-1169(n) DC NO. 35576-A AIDE MEM
C
Non Established
Category : P
Grade : II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC[70]()
Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STUD BAYONET FOR CARBINE 9 MM[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BAYONET 1A FOR RIFLE[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Bayonet for JVPC[70]()
Specification : Bayonet for JVPC 5.56 X 30MM Drg.No. 0204 04 02 00 00 000 00DA (I/Code-7012470194)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
1) Body Cover with Integral Picatiny Rail for LMG Belt Fed[70]()
Specification : Body Cover with Integral Picatiny Rail LMG 7.62 MM Belt Fed as per Drg. No. ARDE/SK/108/005
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Cylinder Gas for LMG Belt Fed[70]()
Specification : Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER GUN MUZZLE[70]()
Specification : COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MUZZLE CAP MOULDING FOR JVPC[70]()
Specification : MUZZLE CAP MOULDING FOR JVPC
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
2) COMPLETE MAGAZINE ASSEMBLY TO DRG NO 29 P 0411STAR CONSISTING OF CASE MAGAZINE SUB ASSEMBLY 29 P 0460 SPRING PLOTFORM AND RETAINER SUB ASSEMBLY 29 P 0440 AND SPRING AUXILARY MAGAZINE 29 P 0028 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LOWER HAND GUARD BAND AS PER DRG NO K 1204 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 1204 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Casing for 100/120 Kg Aerial Bombs()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]()
Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUFFER BODY FOR PLATE BACK ASSY[70]()
Specification : BUFFER BODY FOR PLATE BACK ASSY. TO DRG.NO.DS CAT NO.1005- 0 06645 NOTE:STEEL FORGING WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE BANK GUARANTEE. DC(I) NO.26753-SA DATED 17.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) RETAINING PIN FEED STUD FOR MAG
Description : RETAINING PIN FEED STUD FOR MAG()
Specification : RETAINING PIN, FEED STUD TO DS CAT NO. 5315-001526 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.
C
Estab
2) WASHER FRONT GUIDE RIGHT FOR MAG
Description : WASHER FRONT GUIDE RIGHT FOR MAG()
Specification : DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION.
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) HOUSING TRIGGER OF LMG BELT FED[70]()
Specification : HOUSING TRIGGER OF LMG 7.62MM BELT FED,DRG NO.SK-5817.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Sleeve Button Catch Magazine for JVPC
Description : Sleeve Button Catch Magazine for JVPC()
Specification : SLEEVE BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-04-00-02-005-00DA
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Stem Roller for MAG
Description : Stem Roller for MAG()
Specification : STEM ROLLER FOR MAG 7.62 IN FINISHED CONDITION DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17AS PER DRG
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Block Gas in finish condition for MAG[70]()
Specification : Block Gas in finish condition as per D. S. CAT No. 1005-006815 for MAG 7.62mm (Bore Size Dia 23.021 to 23.037mm)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Finish as per drawing no SK 6503 TE[70]()
Specification : Rod Finish as per drawing no SK 6503 TE
C
Nonestab
2) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC[70]()
Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB
C
Nonestab
2) PIN LOCKING HAND GUARD FOR JVPC[70]()
Specification : PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Blank of Receiver Plate[01]()
Specification : Steel Blank of Receiver Plate Left & Right to Drg. SKM-960*
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Housing Fore Sight for 9X19 mm Machine Pistol[70]()
Specification : Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SPRING AS PER DRAWING NO SK 6517 TE[70]()
Specification : SPRING AS PER DRAWING NO SK 6517 TE
C
Nonestab
2) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
3) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
4) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
2) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
3) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
4) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magazine Assy for JVPC[70]()
Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magazine Assy for JVPC[7012470416]()
Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)
C
Nonestab
2) 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA[70]()
Specification : 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA
C
Nonestab
3) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : Body Housing Lower & Trigger Mechanism Assy. for JVPC 5.56 MM DRG No. 0204-03-03-02-15-000-00DB
C
Nonestab
4) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
5) BOX MAGAZINE[70]()
Specification : BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08
C
Nonestab
6) BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD
C
Nonestab
7) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION[70]()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Nonestab
8) CLOSING CUP for JVPC[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
9) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12[70]()
Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
C
Nonestab
10) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING[70]()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56
C
Nonestab
11) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
12) Loop Sling Front for JVPC[7012470224]()
Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB
C
Nonestab
13) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]()
Specification : AS PER DRG.no. 1005-000977
C
Nonestab
14) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978[70]()
Specification : AS PER DRG.
C
Nonestab
15) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.[70]()
Specification : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.
C
Nonestab
16) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Nonestab
17) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.[70]()
Specification : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.
C
Nonestab
18) Magnet Permanent for Firing Device[70]()
Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
C
Nonestab
19) Magazine Assembly for JVPC[70]()
Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE)COATED AS PER DRG NO.0204-03-03-00-07-000- 00DD
C
Nonestab
20) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
21) DS CAT NO. 6115-001170[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
C
Nonestab
22) Bayonet for JVPC[70]()
Specification : Bayonet for JVPC 5.56 X 30MM Drg.No. 0204 04 02 00 00 000 00DA (I/Code-7012470194)
C
Nonestab
23) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Nonestab
24) BLANK OF BLOCK GAS For JVPC[70]()
Specification : BLANK OF BLOCK GAS For JVPC
C
Nonestab
25) BLANK OF COCKING HANDLE for JVPC[70]()
Specification : BLANK OF COCKING HANDLE for JVPC
C
Nonestab
26) Hammer for JVPC[7012470236]()
Specification : HAMMER FOR JVPC 5.56MM
C
Nonestab
27) HANDLE ASSEMBLY Drg. No SK 4407*[72]()
Specification : HANDLE ASSEMBLY TO DRG.NO-SK 4407*
C
Nonestab
28) HOOK TO DS CAT NO 5340 015108[70]()
Specification : HOOK TO DRG. NO. ARDE/TA/94/27 DS CAT NO 5340-015108 DC(1)26928-SA DT.02-09-16
C
Nonestab
29) Housing Plunger to DS CAT NO 1005 007900[70]()
Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16
C
Nonestab
30) HOUSING SIGHT REAR FOR JVPC[70]()
Specification : HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 15 28 003 00DD
32) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER[70]()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
C
Estab
33) LEVER LOCK GAS CYLINDER WELDING FOR JVPC[7012470157]()
Specification : LEVER LOCKING GAS CYLINDER WELDING FOR JVPC 5.56 X30MM DRG NO. 0204-03-03-01-13-000-00DB CONSISTING OF LEVER LOCKING GAS CYLINDER, PIN LEVER LOCKING GAS CYLINDER
C
Nonestab
34) LEVER LOCKING FOR CARBINE 9 MM[70]()
Specification : LEVER LOCKING(CISA-633)DS CAT NO-1005-006886 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26900-SA DATED-20-07-2016.
C
Nonestab
35) LEVER PIN LOCKING IN FINISHED CONDITION[70]()
Specification : LEVER PIN LOCKING TO DRG.NO. CQA(SA)SK- 588/1 DC(I) NO. 26933-SA DT- 07.09.16 IN FINISHED CONDITION. DS CAT NO 1005-560293.
C
Nonestab
36) Link for JVPC[7012470234]()
Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF
C
Nonestab
37) Magazine Assy with NI PTFE Coated for JVPC[70]()
Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD
C
Nonestab
38) MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC[70]()
Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED AS PER DRG NO. 0204-03-03-00-07- 000-00DC
C
Nonestab
39) ROD COCKING FOR JVPC[70]()
Specification : Rod Cocking for JVPC drg. No. 0204.03-04-00-01-012-00DA (I/Code-7012470462)
Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA
C
Nonestab
42) Barrel Extension Blank up to Stage V for JVPC[70]()
Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)
C
Nonestab
43) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.[70]()
Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magazine Assy for JVPC[70]()
Specification : Magazine Assy. for JVPC as per Drg. No. SK-886(Item code-7012470416)
P
Nonestab
2) 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA[70]()
Specification : 3 POINT SLING JVPC 5.56MM DRG.NO.204-04-03-00-00-000-00DA
C
Nonestab
3) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : Body Housing Lower & Trigger Mechanism Assy. for JVPC 5.56 MM DRG No. 0204-03-03-02-15-000-00DB
C
Nonestab
4) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
5) BOX MAGAZINE[70]()
Specification : BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08
C
Nonestab
6) BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD[70]()
Specification : BUTTON CATCH MAGAZINE FOR JVPC 5.56MM DRG.NO.0204-03-02-02-19-002-00DD
C
Nonestab
7) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION[70]()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 S
C
Nonestab
8) CLOSING CUP for JVPC[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
9) COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12[70]()
Specification : COVER AND PLATE BRAZING TO DS CAT NO. 1005-560621 WITH COVER ,DS CAT NO. 1005-560561 & PLATE REAR COVER DS.CAT.NO. 9515-0 13296 FOR MG 5.56MM 1A1 IN FINISHED CONDITION DC(I) NO. 26608-SA, DT. 07-02-12
C
Nonestab
10) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING[70]()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56M
C
Nonestab
11) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
12) Loop Sling Front for JVPC[70]()
Specification : Loop Sling Front to DRG No. 0204 03 02 37 39 002 00 DB
C
Nonestab
13) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm[70]()
Specification : AS PER DRG.no. 1005-000977
C
Nonestab
14) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978[70]()
Specification : AS PER DRG.
C
Nonestab
15) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.[70]()
Specification : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.
C
Nonestab
16) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003[70]()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Nonestab
17) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.[70]()
Specification : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.
C
Nonestab
18) Magnet Permanent for Firing Device[70]()
Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
C
Nonestab
19) Magazine Assembly for JVPC[70]()
Specification : MAGAZINE ASSY.WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE)COATED AS PER DRG NO.0204-03-03-00-07-000- 00DD
C
Nonestab
20) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
21) Plate Armature in finished condition Drg no. CQA(I)-393/9 to DS CAT NO. 6115-001167()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
Specification : BOX STEEL NO.412 S/4 (GENERAL ARRANGEMENT) DRG.NO.ARDE 1248 AL NO. 49/96 DATE 08.11.96 WITH 5 FITMENTS OF DRG NO. ARDE 1249 DETAIL NO. 1,2,3,4 AND 5. (REQUIRED FOR PACKING OF 68 MM ROCKET HE/PRACTICE)
C
Nonestab
2) 6570016000 BOX H 50 STEEL[65]()
Specification : BOX AMMUNITION S.A. H 50 MARK 1/LA, STEEL TO DRG.NO.SV 140-A DC (I)-34273-A DATED 21.11.1987
C
Nonestab
3) 6570850706 BOX B7A "OLIEVE GREEN"[65]()
Specification : SPECN. NO. IA 1169
C
Estab
4) 6570160000 BOX G 70 MK-1 (STEEL) OLIVE GREEN.[65]()
11) 6570950402 CONTAINER 3RK 33 METAL FOR 125MM[65]()
Specification : CONTAINER CONSISTING OF THE FOLLOWING ITEMS
1.BODY DET. NO. 010
2. COVER DET.NO. 020
3.BOLT DET. NO. 030
4. FORK DET.NO 005
C
Nonestab
12) 6570610080 BOX P60 MK 2 L[65]()
Specification : AMN. CONT. BOX P 60 MARK 2/L TO DRG. PART NO. SV 24 A DC NO. 35530- A.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BODY HOUSING BLANK
Description : BODY HOUSING BLANK()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Estab
2) GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
Description : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010()
Specification : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010
C
Estab
3) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION
Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Estab
4) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
Description : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003()
Specification : PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003
C
Estab
5) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM
Description : SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM()
Specification : SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001
C
Estab
6) COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING
Description : COVER ASSEMBLY MACHINING and SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL CONSISTING OF COVER ASSY MACHINING()
Specification : COVER ASSEMBLY MACHINING & SLIDE RETRACTING WITH SLIDE RETRACTING ENSURED TO MOVE FREELY IN CHANNEL. CONSISTING OF COVER ASSY. MACHINING TO DRG NO. AKC-08/2* SLIDE RETRACTING TO DRG NO. AKC-08/7*.IN FINISHED CONDITION FOR AMOGH 5.56
C
Estab
7) LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER
Description : LEVER CAM TO DRG No PH 1 3 IN FINISHED CONDITION FOR REVOLVER()
Specification : LEVER CAM DRG PH-1-3 IN FINISHED CONDITION. D.A. NO. 35/04 DT. 09-04-04
10) PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
Description : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION()
Specification : PIN SECURING SPINDLE TO DS CAT NO. 5315-004846 DC(I) NO. 25370-SA DT- 22.05.02 IN FINISHED CONDITION
C
Estab
11) Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
Description : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition()
Specification : Seating Collar Gas Regulator Sleeve to DS CAT No. 5360-007217 in finished condition
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Accessories in Container Assembly SK 6601 TE[70]()
Specification : Accessories in Container Assembly SK 6601 TE
C
Nonestab
2) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
3) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
4) Pin SK 6508 TE[70]()
Specification : Pin SK- 6508 /TE
C
Nonestab
5) COVER RETAINER ASSEMBLY DRG No SK 6667 TE[70]()
Specification : COVER RETAINER ASSEMBLY DRG No SK- 6667/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER WITH REINFORCING PLATE SK6549 TE[70]()
Specification : COVER WITH REINFORCING PLATE SK-6549/TE
12) Box PETN / RDX 1 A - L Wood for packing PETN / RDX()
Drg. No. IND/ ME/ 59
R
Estab.
13) Unit Load for 155 mm Charge 8 & 9()
Drg . No. 13 S 002 & Drg. No. 4085566
R
Not Estab.
14) Packing Box CLC-2()
HEMRL Drg No-HE/CAST 089AHT No1,2,3,4
R
Established
15) Packing Box CLC-3()
HEMRL Drg No-HE/CAST 090AHT No1,2
R
Established
16) Packing Box CLC-1()
HEMRL Drg No-HE/CAST 090AHT No1,2,3,4
R
Established
17) Packing Box CLC-4()
HEMRL Drg No-HE/CAST 092AHT No1,2
R
Established
Category : DP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CHEST RIFLE 7.62MM 1B (TO HOLD 10 RIFLES WITH 20 MAGAZINES)()
AS PER DRAWING
C
Not Established
2) CHEST RIFLE 7.62MM 1B (TO HOLD 10 RIFLES WITH 20 MAGAZINES)()
AS PER DRAWING
C
Not Established
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX C 40 A WOODEN()
ISV 513 A
C
Estab
2) BOX WOODEN C 40 A(MODIFIED) FOR PACKING OF 130MM FVC CARTRIDGE CASES()
SK NO 1875
C
Estab
3) AMMUNITION CONTAINER BOX C 40 A WOODEN()
ISV 513 A
C
Estab
4) AMMUNITION CONTAINER BOX C 47 A WOOD AND PLYWOOD()
ISV 554 A
C
Estab
5) AMMUNITION CONTAINER C 47 B WOOD AND PLYWOOD()
ISV 555 A
C
Estab
6) AMMUNITION CONTAINER BOX M 32 A (WOOD)()
ISV 548 A
C
Estab
7) MOP 12 SHELL 155 MM B/T ON PALLET()
DESIGNER REF 155-1000(A)
C
Estab
8) PACKING BOX FOR HDC-1()
HEMRL/MISC/SK-1470
C
Estab
9) PACKING BOX FOR HDC-2()
HEMRL/MISC/SK-1472
C
Estab
10) MOP 12 SHELL 155 MM B/B ON PALLET()
DESIGNER REF 155-2000(A)
C
Estab
11) TIMBER MANGO SIZE 280 MM X 16MM X 2.25M()
IND/ME/883(F) PROV
C
Estab
12) UNIT LOAD 155 MM M 107()
DRG NO 3058086
C
Estab
13) UNIT LOAD HE SHELL 77 B()
DRG NO 3052569
C
Estab
Category : DP
Grade : I,II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX C 40 A WOODEN[65]()
Specification : ISV 513 A
C
Nonestab
2) BOX WOODEN C 40 A(MODIFIED) FOR PACKING OF 130MM FVC CARTRIDGE CASES[65]()
Specification : SK NO 1875
C
Nonestab
3) AMMUNITION CONTAINER BOX C 47 A WOOD AND PLYWOOD[65]()
Specification : ISV 554 A
C
Nonestab
4) AMMUNITION CONTAINER C 47 B WOOD AND PLYWOOD[65]()
Specification : ISV 555 A
C
Nonestab
5) AMMUNITION CONTAINER BOX M 32 A (WOOD)[65]()
Specification : ISV 548 A
C
Estab
6) MOP 12 SHELL 155 MM B/T ON PALLET[65]()
Specification : DESIGNER REF 155-1000(A)
C
Estab
7) PACKING BOX FOR HDC-1[65]()
Specification : HEMRL/MISC/SK-1470
C
Estab
8) PACKING BOX FOR HDC-2[65]()
Specification : HEMRL/MISC/SK-1472
C
Estab
9) MOP 12 SHELL 155 MM B/B ON PALLET[65]()
Specification : DESIGNER REF 155-2000(A)
C
Estab
10) TIMBER MANGO SIZE 280 MM X 16MM X 2.25M[65]()
Specification : IND/ME/883(F) PROV
R
Nonestab
11) UNIT LOAD 155 MM M 107[65]()
Specification : DRG NO 3058086
C
Nonestab
12) UNIT LOAD HE SHELL 77 B[65]()
Specification : DRG NO 3052569
C
Nonestab
13) 6584113903 PACKING BOX WOODEN[65]()
Specification : PACKING BOX WOODEN AS PER ARDE DRAWING NUMBER 9759,DETL NO.3 SHEET NO.2
C
Nonestab
14) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
15) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
16) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
Specification : BOX 520:9 EMPTY ASSEMBLY TO DRG NO.TRD-222169.
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BOX FOR 84mm MK-III(71)
AS PER DRG.& SPECIFICATION
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774200 PACKING BOX FOR SHAPED CHARGE 145MM[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255529016 TIMBER N-C SIZE 51MM X 51MM X 1.50M[22]()
Specification : SPECN. NO. IND/ME/883 (F) (PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570963298 BOX S 9 WOOD FOR 140MM HE ROCKET[65]()
Specification : BOX S-9 WOOD TO HOLD-2, 140MM HE FRAGMENTATION ROTARY ROCKET PLGD DRAWING NUMBER NAI(V)-5502(P).
C
Nonestab
2) 2255050116 TIMBER N C SIZE 110MM X 16MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
3) 2255400600 TIMBER N C SIZE 210MM X 25MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
4) 2255408514 TIMBER N C SIZE 240MM X 22MM[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]()
Specification : IND/ME/883(F) (PROV)
R
Nonestab
2) 2255540403 TIMBER N C SIZE 60 X 130MM[22]()
Specification : IND/ME/883 (F) (PROV)
R
Nonestab
3) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
4) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
5) 2255406390 TIMBER N C SIZE[22]()
Specification : IND/ME/883(F)(PROV)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]()
Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
2) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570250009 PACKING BOX FOR 155 MM BBU AS PER DRG NO PROP SK 803[65]()
Specification : PACKING BOX FOR 155 MM BBU AS PER DRG NO PROP SK 803
C
Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO HE CAST 086 DET 1 TO 10 EXCLUDING 90MM SHAPED CHARGE SET OF LEGS QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO. HE/CAST 086 DET 1 TO 10(EXCLUDING 90MM SHAPED CHARGE & SET OF LEGS) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
3) TIMBER NON CONIFEROUS TO SPECN IND ME 883 F 2015 DC 5452 ME DATED 01 06 2016 and SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE 250 MM 26 MM 155 MTR 2255402703[22]()
Specification : TIMBER NON-CONIFEROUS TO SPECN IND / ME /883(F)-2015 DC 5452 (ME) DATED 01/06/2016 & SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE- 250 MM X 26 MM X 1.55 MTR
E
Nonestab
4) 6333501001 TIMBER PLANK SIZE 155 MM 19 MM 1 Point 25 MTRS AND TIMBER[63]()
Specification : TIMBER PLANK SIZE:- 155 MM X 19 MM X 1.25 MTRS AND TIMBER :- DEODAR/SAL/CHIR TO SPEC.IND/ME/883(F) PROV
C
Nonestab
5) 6333501002 TIMBER PLANK SIZE 180 MM 26 MM 1 Point 55 MTR AND TIMBER[63]()
Specification : TIMBER PLANK SIZE:- 180 MM X 26 MM X 1.55 MTR. AND TIMBER:DEODAR/SAL/CHIR TO SPEC IND/ME/833(F) PROV.
C
Nonestab
6) 2270528353 PLYWOOD TYPE GRADE MR AB TO SPECN IS 303 1989 RA 2018 SIZE2400MM 1200MM 08MM THICK 5 PLY[22]()
Specification : PLYWOOD TYPE GRADE MR/AB TO SPECN: IS:303-1989(RA 2018)SIZE2400MM X 1200MM X 8MM THICK (5 PLY)
C
Nonestab
7) 2270403355 PLYWOOD 6 MM THICK SIZE 2400 MM 1200 MM GRADE BWR APPEARANCE CLASS[22]()
Specification : PLYWOOD 6 MM THICK, SIZE 2400 MM X 1200 MM, GRADE- BWR, APPEARANCE CLASS-AB STANDARD IS:303-1989 (RA-2018)NUMBER OF PLY : 5 PLY
C
Nonestab
8) 2270441355 PLYWOOD 3 MM THICK SIZE 2400 MM 1200 MM GRADE MR APPEARANCE[22]()
Specification : PLYWOOD 3 MM THICK, SIZE 2400 MM X 1200 MM, GRADE – MR, APPEARANCE CLASS-BB, STANDARD IS:303-1989 (RA 2018)NUMBER OF PLY : 3 PLY
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AMMUNITION CONTAINER BOX F2A L F 9911356419[99]()
Specification : AMMUNITION CONTAINER BOX F2A PLYWOOD TO DRG NO. TRD-1612 (AMMUNITION CONTAINER BOX F2A DRG PT NO.ISV-557-A DC-36222-ADT.22/01/97.)SPECN:-IA-948(ak) DC-36868-A THE SHADE OF PAINTTO BE USED IS PAINT READY MIX. QUICK DRYING MATT.FOR GENERALP
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX W-131 M-3/L WOODEN ISV-162A[65]()
Specification : BOX W-131 MK-3/L WOOD TO DRG PT NO. ISV/162-A DC-35568-A DATE 1/9/93 SPECN:-IA-948(ak) DC-36868-A, AIDE MEMOIRE W/4
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-369 WOODEN IA-880 ISV-165A[65]()
Specification : BOX M-369 MK1/L/(WOOD) TO DRG. PT. NO. ISV-165-A DC-34541-A DT 28-1-89 SPECN:-IA 948 (ak) DC-36868-A AIDEMEMOIRE-W/4.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-167 MK-2/L (WOOD) ISV/96-A[65]()
Specification : AMMN CONT.BOX,M-167 MK-2/L (WOOD) TO DRG PT NO.ISV/96-A DC- 37245-A DT.19-01-10 SPECN:-IA- 948(ak)DC NO.36868-A AIDEMEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR BOX M-167 IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIRED WHEN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.-O.F.KHAMARIA[99]()
Specification : AMMN.CONTAINER BOX C 55A (PLYWOOD) FOR AMMN.CONT.ASSY.173A TO DRG.PART NO.ISV 626A DC 37283-A DT.30/6/2011 REFER WITHDRG.PART NO.ISV.557GA. DC 37283-A DT 30/6/2011 AS PER LIST OF COMPONENTS ENCLOSED.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CRATE 13A WOODEN ISV-948 (84HE/ILLG[65]()
Specification : CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED W
2) BOX N-18 MK-1(WOOD) TO HOLD 2 MARKER SMOKE A/S WHITE OR YELLOW [65]()
Specification : DRG.NO.NAD 4392, SHEET-1 OF 2 SHEETS
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Box H 33 MKI IN Empty Wood[65]()
Specification : Box H-33 MKI (IN), Empty (Wood) To Drg. No. NAD 4289/2 ARD 2399 DT. 4/12/09
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PALLET FOR SHELL 155 MM ( 12 PACKS)[65]()
Specification : DRG.NO. 155-1210
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF PLYWOOD PACKING FITMENTS FOR BOX C 43 A[65]()
Specification : DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TIMBER M H C PLANKS 2255055300[22]()
Specification : TIMBER MANGO/HOLLOCK/CHAPLAS PLANKS KILN SEASONED & PRESSURE TREATED UNPLAND OR ANY OTHER SPECIES COVERED BY THE SPEC:- IND/ME/883 (f) (PROV) DC NO 3539-ME DT 24/10/98 SIZE 52MM X 152MM X 1.6M LONG
R
Nonestab
2) TIMBER PLANK 13 X 172MM X 2 5M LF 2255055301[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIK 13 x 172MM x 2.5M.
R
Nonestab
3) TIMBER PLANK 22 X 85MM X 2 5M LF 2255055302[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 22 x 85MM x 2.5M.
R
Nonestab
4) TIMBER PLANK 16 X 75MM X 2 5M LF 2255055303[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 75MM x 2.5M.
R
Nonestab
5) TIMBER PLANK 16 X 110MM X 2 5M LF 2255055304[22]()
Specification : TIMBER PLANK M/H/CH/CY/CHIC 16 x 110MM x 2.5M.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BOX WOOD PZM[65]()
Specification : BOX WOOD NO.PZ-1 TO DRG. NO. ARDE 1953 SHEET NO. 1,2&3 AND ARDE-1953, DET NO.4 .(OFBA/RK/504,505,506,& 507) RESPECTIVELY
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR SPECIAL METAL CONTAINER[65]()
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) PACKING BOX OF FLSC-10[14]()
Specification : AS PER OFBA DRG. NO. OFBA/CX/272
R
Nonestab
2) PACKING BOX FOR FLSC12[65]()
Specification : PACKING BOX FOR FLSC-12. AS PER DRG. No. HEMRL DRG. HE/CAST/082-SHT No. 1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/082-DET NO.1, DET NO.2. HEMRL DRG. HE/CAST/081 DET NO.7, DET NO.8 & DET
R
Nonestab
3) PACKING BOX FOR FLSC 4[65]()
Specification : PACKING BOX FOR FLSC-4, AS PER DRG. NO. HEMRL DRG HE/CAST/081-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4, DET NO.5, DET NO.6, DET NO.7, DET NO.8 & DET NO.9.
R
Nonestab
4) PACKING BOX FOR FLSC-25[65]()
Specification : PACKING BOX FOR FLSC-25. AS PER DRG NO. HEMRL DRG HE/CAST/083-SHT NO.1, SHT NO.2. HEMRL DRG HE/CAST/081-DET NO.1, DET NO.2, DET NO.3, DET NO.4. HEMRL DRG HE/CAST/083-DET NO.1, DET NO.2, DET NO.3. HEMRL DRG. HE/CAST/081-DET NO.8 & DET NO.
Specification : CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) WOODEN CRATE[65]()
Specification/Drawing:
OFN/BMCS/M-92/WOODEN CRATE
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Grey Iron Foundry
[ENR Registration]
Name
Specification
Use
Status
1) Wooden Packing Box for 100/120 Kgs. Aerial Bomb. to Drg.No.KHPK-410026(Amended),GIF-SK-2257 for 100/
Description : Wooden Packing Box for 100/120 Kgs. Aerial Bomb. to Drg.No.KHPK-410026(Amended),GIF-SK-2257 for 100/()
Specification : As per Drg. & Specification
R
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) AMMUNITION CONTAINER M31-A,CQA/AMN/2870()
Specification : DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A
R
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) AMMUNITION CONTAINER M31-A,CQA/AMN/2870()
Specification : DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A
Specification : BARREL AFTER HONNING, AS PER DRAWING AND QUALITY MONITORING FOR INSPECTION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) Rolling Ring Assy for 500Kg GP LF 9911358586[99]()
Specification : Rolling Ring Assembly for 500Kg GP Bomb
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MACHINING & SUPPLY OF LIMITER TO DRG.NO. 2A42.01.006 (C1006) REQUIRED FOR 30mm CANNON MATERIAL WILL BE ISSUED BY OFT[00]()
Specification : AS PER DRG TO MACHINING & SUPPLY OF LIMITER TO DRG.NO. 2A42.01.006 (C1006)
REQUIRED FOR 30mm CANNON
MATERIAL WILL BE ISSUED BY OFT
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA
E
Nonestab
2) CYLINDER PRE MACHINING[70]()
Specification : CYLINDER PRE-MACHINING 90%
C
Nonestab
3) CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637[70]()
Specification : CYLINDER PRE MACHINING FOR MGL TO DRG TEND 2637
C
Nonestab
4) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) RIVET FOR FUZE ISD 30 MM HE GRANADE RUDRA[63]()
Specification : RIVET FOR FUZE ISD 30 MM HE GRANADE-RUDRA
C
Nonestab
2) HAMMER CTM 0174[70]()
Specification : HAMMER IN F/C AS PER DRG. NO. CTM-0174
C
Nonestab
3) RECEIVER CTM 0178 1 TO CTM 0178 2[70]()
Specification : RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2
C
Nonestab
4) MAGAZINE SUB ASSY CTM 0175[70]()
Specification : MAGAZINE SUB ASSY IN F/C AS PER DRG DRG NO CTM-0175
C
Nonestab
5) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LAYERS STATION ASSEMBLY PART NO 1156269[90]()
Specification : LAYER STATION ASSEMBLY PART NO.1156269
C
Nonestab
2) SHEAVE OUTER TO PART NO 4018739[90]()
Specification : SHAVE OUTER TO PART NO 4018739
C
Nonestab
3) 9069112768 RING WELDING AND MACHINING BOF 4020632[90]()
Specification : 9069112768 RING WELDING AND MACHINING BOF 4020632
C
Nonestab
4) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RAM ROD Assy. for 38mm MSL[70]()
Specification : 33P 6008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN EXTRACTOR AS PER Drg No K 2014 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S 2 TO DRG NOTEND 2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY[70]()
Specification : PRE MACHINED BLANK S-2 TO DRG.NO.TEND2607 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001 FIXED BUTT TAR BODY
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL[70]()
Specification : AS PER DRG OF STOCK BUTT SUB ASSY TO DRG. No. 33P 4010 FOR 38MM MSL
C
Nonestab
2) HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.[70]()
Specification : AS PER DRG OF HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.
C
Nonestab
3) PLATE BUTT RELEASE FOR MGL TO DRG. NO.30P 5014[70]()
Specification : AS PER DRG OF PLATE BUTT RELEASE FOR MGL TO DRG. NO.30P 5014
C
Nonestab
4) WELDING OF COVER COMBINATION ASSY TO DRG. NO. 30P 1500 (40MM MGL) SET OF COMPONENTS 30P 1501*3,30P1502*,30P 1503, 30P 1504[00]()
Specification : AS PER DRG OF " WELDING OF COVER COMBINATION ASSY TO DRG. NO. 30P 1500 (40MM MGL) SET OF COMPONENTS 30P 1501*3,30P1502*,30P 1503, 30P 1504
"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
2) BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
3) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
4) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN EXTRACTOR AS PER Drg No K 2014 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRAWING
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEMI FINISHED BLANK PIN EXTRACTOR FOR 40MM UBGL TO DRG.NO. TEND 2192 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
2) HOUSING TO DRG NO 44P 01001 ST 2 REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
3) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
4) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
5) MAGAZINE CATCH TO DRG NO 44P 04004[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
6) BARREL LATCH TO DRG NO 44P 04005[70]()
Specification : AS PER OFB REQUIREMENT
C
Nonestab
7) SLEEVE KEY TO DRG NO 44P 04008ST 2[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
8) TRIGGER BOX SPINE TO DRG NO 44P 06101 REQ FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
9) RECEIVER BUSHING TO DRG NO 44P 04010 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
C
Nonestab
10) TRIGGER BOX BASE[70]()
Specification : AS PER REQ
C
Nonestab
11) TRIGGER BOX BOLT TO DRG NO 44P 06003[70]()
Specification : AS PER REQ
C
Nonestab
12) BASE DOUBLER TO DRG NO 44P 06103 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
13) TRIGGER TO DRG NO 44P 06008 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
14) SAFETY PLATE TO DRG NO 44P 06016 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.[70]()
Specification : AS PER DRG OF HANDLE RELEASE SUB ASSY TO DRG. No. 33P 2020 FOR 38MM MSL.
C
Estab
2) RAM ROD ASSEMBLY TO DRG. No. 33P 6008* FOR 38mm MSL.[70]()
Specification : AS PER DRG OF RAM ROD ASSEMBLY TO DRG. No. 33P 6008* FOR 38mm MSL.
C
Nonestab
3) ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 A3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 A3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
2) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Estab
3) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
4) MSL LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
5) HOUSING TO DRG NO 44P 01001 ST 2 REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
6) BUTT GRIP ASSY TO DRG NO 13000 STAR REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
C
Nonestab
7) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
8) BARREL LATCH TO DRG NO 44P 04005[70]()
Specification : AS PER OFB REQUIREMENT
C
Nonestab
9) SAFETY PLATE TO DRG NO 44P 06016 ST REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
10) REAR MOUNTING BLOCK TO DRG NO 44P 05102 REQ FOR AMR[70]()
Specification : AS PER OFB REQ
C
Nonestab
11) FORWARD MOUNTING BLOCK TO DRG NO 44P 05103 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
12) CARRYING HANDLE ASSY TO DRG NO 11000 REQ FOR AMR[70]()
Specification : AS PER REQ
C
Nonestab
13) MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL DRAWING NO TEND 2662
C
Nonestab
14) Manufacturing and supply of Rear Cross blank DRG NUMBER TEND 2655[70]()
Specification : MANUFACTURING AND SUPPLY OF REAR CROSS BLANK DRAWING NO. TEND 2655 WITH FIRM'S MATERIAL REQUIRED FOR MSL
C
Nonestab
15) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL[70]()
Specification : ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE TO DRG NO CTM 166[70]()
Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C
C
Nonestab
2) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]()
Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BALL RACE ASSY (CONSISTING OF (i) PIN DRG.NO.2440A13013 (ii)BALL RACE TO DRG.NO.3100-33005 ) FOR SH[63]()
Specification : DRG NO.2440A13013
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BASE CANISTER FOR SHELL 155 mm Illg[63]()
Specification : IS 5517-1993
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR2 FROM OFT MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL
R
Nonestab
2) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()
Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Finished Through IC Machining route for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
R
Nonestab
2) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
3) Receiver Body for 9X19 mm Machine Pistol[70]()
Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing
C
Nonestab
4) FEED TRAY INTEGRATED FOR LMG BELT FED[70]()
Specification : FEED TRAY INTEGRATED AS PER DRG.NO. 1804 01 05 00 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
5) Barrel Mount for 9X19 mm Machine Pistol[70]()
Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing
R
Nonestab
6) RECEIVER FOR LMG BELT FED[70]()
Specification : RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED
C
Nonestab
7) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
8) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
9) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) FABRICATION AND MACHININGH OF BRACKET[90]()
Specification : FABRICATION AND MACHININGH OF BRACKET
C
Nonestab
2) RINGH WELDING AND MACHINING BOF 4026964[90]()
Specification : RINGH WELDING AND MACHINING BOF 4026964
C
Nonestab
3) RINGH WELDING AND MACHINING TO PART NO BOF 4020632[90]()
Specification : RINGH WELDING AND MACHINING TO PART NO BOF 4020632
C
Nonestab
4) PEDAL WELDING AND MACHINING 5045062[90]()
Specification : PEDAL WELDING AND MACHINING 5045062
C
Nonestab
5) COVER WELDING AND MACHINING TO DRG NO 3019272[90]()
Specification : COVER WELDING AND MACHINING TO DRG NO 3019272
C
Nonestab
6) LEVER WELDING AND MACHINING DRG NO 6098805[90]()
Specification : LEVER WELDING AND MACHINING DRG NO 6098805
C
Nonestab
7) 9910448142 PIPE ASSEMBLY TO PART NO IFL943 SA 4710040645[90]()
Specification : 9910448142 PIPE ASSEMBLY TO PART NO IFL943 SA 4710040645
C
Nonestab
8) 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB[90]()
Specification : 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
808
Factum Tool Engineering
Factum Tool Engineering
Plot no:D-83, MIDC, Chakan Industrial Area,Ph-II, Bhamboli, Tal:Khed Dist: Pune BHAMBOLI CHAKAN Pune Maharashtra
PIN1 : 410501
Phone No. : 684301 GSTIN : 27AAFFF3264J1ZB
1) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071[70]()
Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) RED DOT SIGHT TO DRG NO 30P 4100[70]()
Specification : 30P 4100
C
Nonestab
2) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
3) BOLT HOUSING[74]()
Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
4) SHAFT ENCODER CASING[74]()
Specification : SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
5) BUMPER ARM[74]()
Specification : BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
6) BUMPER ARM LOCK[74]()
Specification : BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
7) BLOCKING ELEMENT[74]()
Specification : BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
8) BRACKET ASSY 1[74]()
Specification : BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG
C
Nonestab
9) SECTOR BACK COVER FNSH[74]()
Specification : SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
10) SECTOR FRONT COVER FNSH[74]()
Specification : SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
11) ADAPTOR SPRING[74]()
Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG
C
Nonestab
12) LIMITER EXTERNAL[74]()
Specification : LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
13) WASHER FLAT CRES M5 A4[74]()
Specification : WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
14) SUPPORT ELEVATION DRIVE[74]()
Specification : SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
15) BOLT GEAR ELEVATION[74]()
Specification : BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
16) BRACKET ASSY2[74]()
Specification : BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG
C
Nonestab
17) SPACER OIL RETAINER[74]()
Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025[70]()
Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025
R
Nonestab
2) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL LATCH TO DRG NO 44P 04005[70]()
Specification : AS PER OFB REQUIREMENT
C
Nonestab
2) CATCH MAGAZINE[70]()
Specification : AS PER DRAWING
C
Nonestab
3) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
4) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
5) BOLT CENTERING[74]()
Specification : BOLT, CENTERING (View)020054A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
6) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
7) WASHER SPHERICAL[74]()
Specification : WASHER SPHERICAL (View) AS PER DRG.064414A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
8) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
9) INSERT M4 ALTERED ITEM[74]()
Specification : INSERT M4, ALTERED ITEM (View)AS PER DRG 031682A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
10) BOLT GEAR TRAVERSE[74]()
Specification : BOLT GEAR, TRAVERSE (View)AS PER DRG 031669A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
11) BELLEVILLE LEVER TRAVERSE[74]()
Specification : BELLEVILLE, LEVER TRAVERSE (View)AS PER DRG 062346A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
12) BASE STOP B[74]()
Specification : BASE STOP B (View)AS PER DRG 019895A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
13) SCREW SPRING INTERFACE[74]()
Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
14) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
15) Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun[74]()
Specification : Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPRING CATCH MAGAZINE K 1112[70]()
Specification : AS PER DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN CATCH MAGAZINE AS PER DRG NO K 1113 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1113 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE INVESTMENT CASTING DS CAT NO 1005 001539 TO DRG NO TEND 1874 ICR 1199 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO TEND.1874. (ICR-1199) (WITH FIRM'S MATERIAL)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE TO DRGNO 29P 0045STAR required for 0POINT315 Sporting Rifle[03]()
Specification : AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle
C
Nonestab
2) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE TO DRGNO 29P 0045STAR required for 0POINT315 Sporting Rifle[03]()
Specification : AS PER DRG.NO: 29P 0045* required for 0.315" Sporting Rifle
C
Nonestab
2) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHIELD FRONT TO DRG. NO. 30P 1102[70]()
Specification : AS PER DRG OF SHIELD FRONT TO DRG. NO. 30P 1102
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHIELD FRONT TO DRG NO 33P 1105[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHIELD FRONT TO DRG. NO. 30P 1102.[70]()
Specification : as per drawing & specification.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN FOR FRONT SIGHT BLOCK AND GAS PORT BLOCK AS PER DRG No K 1211 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL
C
Nonestab
2) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
3) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
4) SHIELD FRONT FOR 40MM MGL WITHOUT HEAT TREATMENT AS PER DRG NO TEND 2724[70]()
Specification : AS PER OFT REQUIREMENTS
E
Nonestab
5) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CHANGE LEVER LH TO DRG. No. 33P 3036 FOR 38mm MSL.[70]()
Specification : AS PER DRG OF CHANGE LEVER LH TO DRG. No. 33P 3036 FOR 38mm MSL.
C
Nonestab
2) CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL.[70]()
Specification : AS PER DRG OF CHANGE LEVER RH TO DRG. No. 33P 3034 FOR 38mm MSL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR WASHER AS PER DRG NO K 2073 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 2073
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT WASHER AS PER DRG NO K 2072 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 2072
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
3) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
4) SPRING MAIN TO DRG No 29P 0015 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. No.: 29P 0015 required for 0.315" Sporting Rifle
C
Nonestab
5) SPRING SCREW BAND INNER TO DRG NO 29P 0061STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG NO.29P 0061* required for 0.315" Sporting Rifle
C
Nonestab
6) PIN FIXING BAND BACK SIGHT TO DRG No 29P 0006 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
7) CAP SLING TO DRG NO 29P 0044STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle
C
Nonestab
8) PIN STOP BOLT LOCKING TO DR NO 29P 0048STAR required for 0POINT315 Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
9) SCREW PLATE BUTT TO DRG NO 29P 0059STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
10) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
11) EJECTOR TO DRG NO 44P 03006 ST 2 REQUIRED FOR AMR[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 STAR 5 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
2) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA
C
Nonestab
2) SUPPLY OF MAGAZINE 7 point 62mm 2A ICR 84A[70]()
Specification : SUPPLY OF MAGAZINE 7.62mm.2A (ICR 84A) DC.NO.22245SA DT.15.07.93 CONSISTING OF ICR 91SA,DC NO.22756-SA DT.12.12.94& ICR 90SA, DC.No.22540-SA DT:20.05.94 & DS CAT NO. 1005-000344, DC NO.26829-SA DT.11.05.16. FOR DC NO. LATEST ISSUE TO BE
C
Nonestab
3) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
4) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
5) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
6) Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR[70]()
Specification : Supply of Magazine 7 62mm 2A ICR 84A DC No 22245 SA Dt 15 07 93 consisting of ICR 91SA DC No 22756 SA Dt12 12 94 and ICR 90SA DC No 22540 SA Dt 20 05 94 and DS CAT No 1005 000344 DC No 26829 SA Dt 11 05 16 required for 7 62mm SLR
E
Nonestab
7) MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR[70]()
Specification : MFG and SUPPLY OF A SET OF FULLY FINISHED PINS AS PER 12 DRAWING GIVEN IN ANNEXURE REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO D S CAT NO 1005 001514 ICR 1325 I DC NO 26759 SA DT 29 05 2015 SHEETI II DC NO 26766 SA DT 02 07 2015 SHEET II FROM FORGING TO DRG NO RF SK 725 IL[00]()
Specification : AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO D S CAT NO 1005 001514 ICR 1325 I DC NO 26759 SA DT 29 05 2015 SHEETI II DC NO 26766 SA DT 02 07 2015 SHEET II FROM FORGING TO DRG NO RF SK 725 IL[00]()
Specification : AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO D S CAT NO 1005 001514 ICR 1325 I DC NO 26759 SA DT 29 05 2015 SHEETI II DC NO 26766 SA DT 02 07 2015 SHEET II FROM FORGING TO DRG NO RF SK 725 IL[00]()
Specification : AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL
C
Nonestab
2) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
3) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()
Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
2) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
3) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()
Specification : AS PER OFT REQUIRMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF STUD AS PER DRG NO K 1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF STUD AS PER DRG NO K 1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STUD COCKING HANDLE D S CAT No 5307 004445 D C No 24474 SA DATED 18 08 1999 FOR D C No LATEST ISSUE TO BE FOLLOWED ICR 1202[70]()
Specification : AS PER D.S.CAT.No.: 5307-004445, D.C.No.:24474-SA, DATED:18/08/1999 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED. (ICR-1202)
C
Nonestab
2) STUD LEVER LOCK TO D S CAT NO 1005 001659 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1321[70]()
Specification : AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)
1) Machining of Components of Ferrous / Non Ferrous / Forged Material. Capacity up to length of 500mm, ()
As per GCF requirement , Drg , Size, Spcn.
C
Not Established
Category : P
Grade : III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08
Description : BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08()
Specification : BARREL (BLANK) REQUIRED FOR REVOLVER MK-III DRG NO SK-5381R* D.A. NO. 41/08
C
Estab
2) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT
Description : STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT()
Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G)
C
Estab
3) Body Trigger for MAG
Description : Body Trigger for MAG()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Estab
4) EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04
Description : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04()
Specification : EXTRACTOR TO DRG.NO.PH-10-1 FINISHED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 35/04 DT. 9-4-04
C
Estab
5) FRONT FEED PAWL for MAG
Description : FRONT FEED PAWL for MAG()
Specification : FRONT FEED PAWL DS CAT NO 1005-006637 IN FINISHED CONDTION WITH FIRM MATERIAL FOR MAG 7.62MM DC(I) NO. 25321-SA, DT. 08-04-02
C
Estab
6) COVER CATCH for MAG
Description : COVER CATCH for MAG()
Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013
C
Nonestab
Category :
Grade : Grade III
Size :
L
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
L
816
S S Enterprises as a sole selling agent of M/s Seema Slotted Angles, Kanpur
659-A, W-2, Damodar Nagar, Near Sukla Baratshala, Barra Kanpur Uttar Pradesh
PIN1 : 208027
Phone No. : 8604771606
3) NOSE ASSY FOR BOMB 3 KG PRACTICE
Description : NOSE ASSY FOR BOMB 3 KG PRACTICE()
Specification : DRG.NO.ARDE 2024/DET.1 CONSISTING OF :(1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG.NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5(5)MULTI-TOOTH LOCK W
C
Estab
4) DRAG RING A & B
Description : DRAG RING A & B()
Specification : DRG NO. ARDE/ 2024 DET 33 AMENDED VIDE AL NO.650 DATED 14-3-90.
C
Estab
5) A SET OF LID, BOOSTER TUBE, CASE RING
Description : A SET OF LID, BOOSTER TUBE, CASE RING()
Specification : (1) LID TO DRG. NO. ARDE 2024/26 AMDT. NO. AL NO. 671 DT. 29-5-91 (2) BOOSTER TUBE TO DRG. NO. ARDE/2024/21 AMDT. NO. AL NO. 616 DT 4-10-88 (3) CASE AND RING ASSY TO DRG. NO. ARDE 2024/18 AMDT. R.NO. 1 DATED 25-8-86.
C
Estab
6) EMPLY COMPONENTS LOWER SET FOR BOMB 51MM ILLG.
Description : EMPLY COMPONENTS LOWER SET FOR BOMB 51MM ILLG.()
Specification : CQA(A) 2328
C
Estab
7) SET OF FIVE COMPONENTS OF 51MM ILLG. CONSISTING OF (I) BASE PLATE, (II) COLLAR, (III) EYE BOLT, (IV)
Description : SET OF FIVE COMPONENTS OF 51MM ILLG. CONSISTING OF (I) BASE PLATE, (II) COLLAR, (III) EYE BOLT, (IV)()
Specification : DRG. NO. ARDE-2064
C
Estab
8) PIN LOCKING FOR 51MM ILLG
Description : PIN LOCKING FOR 51MM ILLG()
Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 DC NO. 35882-A DT.26/12/94 SPECN.CQA(A) 2328 (d) DC-37332 -A DATED 01-03-2013
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Dehu Road
[ENR Registration]
Name
Specification
Use
Status
1) WASHER COPPER FOR SHELL 155MM ILLG M1A1
Description : WASHER COPPER FOR SHELL 155MM ILLG M1A1()
Specification : DRG NO. 2440A03076
C
Estab
2) HOLDER DELAY FOR SHELL 155 MM ILLG M1A1
Description : HOLDER DELAY FOR SHELL 155 MM ILLG M1A1()
Specification : DRG NO. 2440A03062
C
Estab
3) BOW SHACKLE FOR SHELL 155 MM ILLG
Description : BOW SHACKLE FOR SHELL 155 MM ILLG()
Specification : BOW SHACKLE TO DRG.NO.05-4030-3100-26001 DC-36942-A, STAINLESS WICHARD CAT. NO.1243 IND.EQUIVALENT BS 970 PART :1983 DESIGNATION 410S21 FOR SHELL 155MM ILLG.
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP
Description : 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
