1) MEMBRANE TO CQA A DRAWING NO BW 8 363 012 DC 37271 A DT 08 11 10[00]()
Specification : MEMBRANE TO CQA(A) DRAWING NO.BW 8.363.012 DC 37271-A DT. 08-11-10.
C
Nonestab
2) SAFETY LOCK ASSEMBLY TO DRG NO BW 6 042 512 CB DC 34241 A DT 24 09 87[00]()
Specification : SAFETY LOCK ASSEMBLY TO DRG.NO.BW.6.042.512 CB DC-34241-A,DT 24.09.87,CONSISTING OF 4 COMPT.(1)SLIDER TO DRG.NO.BW8.264. 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.635 006 (2)CLIP TO DRG.NO.BW8.388.004 (3) CAP TO DRG.NO.BW8.6
C
Nonestab
3) DELAY TRAIN TO OFAJ DRG NO FS 2496B OR CQA A DRG NO BW 8 635 111 DC NO 37271 A DT 08 11 10[00]()
Specification : DELAY TRAIN TO OFAJ DRG. NO. FS-2496B OR CQA (A) DRG NO. BW 8.635.111 DC NO. 37271-A DT. 08-11-10
C
Nonestab
4) WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 2010[00]()
Specification : WASHER TO CQA(AMMN.) DRG. NO. BW 9.440.010 DC 37271-A DT. 08.11.2010.
C
Nonestab
5) CAP II 1 TO DRG NO DET 1 DC 37271 A DT 08 11 10[00]()
Specification : CAP II-1 TO DRG. NO. CQA(A)/AMN/2860 DET-1 DC 37271-A DT.08-11-10
C
Nonestab
6) DISC TO CQA AMMN DRG NO BW 8 685 000 DC 34241 A DT 24 9 87[00]()
Specification : SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A.
C
Nonestab
6) BODY (FINISH) FOR PISTOL AUTO 9MM 1A.[67]()
Specification : BODY TO DS CAT NO 1005-003145 (DC-26821-SA).MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE ASPER COL.(C) OF SL.N
C
Nonestab
7) GAS REGULATOR FOR RIFLE 5.56MM.INSAS[70]()
Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).
C
Nonestab
8) BLANK FOR STUD CHANGE LEVER .[79]()
Specification : BLANK FOR STUD CHANGE LEVER TO RFI SK.7017-S (DC-NILDT.12/9/2001). FOR RIFLE 5.56 MM INSAS.TP OF MATL. TO BEBLANK CARBURISED TO ACHIEVE MECHANICAL PROPERTIES OF BASICMATL.& TO ACHIEVE 400-475 HV AFTER H&T.GRAIN SIZE TO CONFORMASTM 5 TO 8
C
Nonestab
9) CYLINDER GAS FOR RIFLE 5.56MM INSAS[70]()
Specification : CYLINDER GAS TO DSCAT NO.1005-560066(LATEST DC-25824-SA DT.29/07/03) FOR RIFLE 5.56MM INSAS
C
Nonestab
10) FLASH ABSORBER (WITHOUT PHOSPHATING)[79]()
Specification : FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2F
C
Nonestab
11) BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS[70]()
Specification : BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993(DC-26469-SA).(COMPLETE ASSY.).FOR RIFLE 5.56MM INSAS
C
Nonestab
12) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432100001 STEEL CUP WITH SEAL ARDE 2120 120 ARJUN[64]()
Specification : CQA(A) 5709
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330604500 SLEEVE REGULATOR PT 42[63]()
Specification : REGULATOR SLEEVE TO DRG. NO. 3-016919, 53-B-025Y,DET.NO.42, DC 34858-A FOR FUZE B-429.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE PERCUSSION DA 5A, EMPTY()
CQA(A) 0922(c)
Component
Established
2) FUZE PERCUSSION DA No 162 MK- 8(M-2)()
CQA(A) 0917(h)
Component
Established
3) CARTRIDGE TRAINING FOR 81 mm (MTD) ASSEMBLY.()
CQA(A) 2348(e)
Component
Established
4) NOTCHED COIL TO DESIGNER REF. ARDE 1933 DET. NO. 3, PT. NO. ITV 169()
CQA(A) 2322
C
Established
5) MINE APM 16 A1 CONSISTING OF (1) BODY LOADING ASSY. (2) CONTAINER ASSY. (3) SPOOL ASSY.()
CQA(A) 1804
C
Established
6) PLUG REPRESENTING FUZE DA5A AS PER DRG. NO. ARDE 2236, DET. NO.16, PT. NO. ITV 285()
DRG. NO. ARDE 2236, DET. NO.16, PT. NO. ITV 285
C
Non Established
7) PLUG TO DRG. NO. ARM/1225 A-4 DT.18.11.2005 SPECN. AIR 304-L()
AIR 304-L
C
Non Established
8) GENERAL ARRANGEMENT FUZE K3M HE/PRACTICE EMPTY ASSEMBLED TO DRG NO. NAI(P) SKETCH - 324()
DRG NO. NAI(P) SKETCH - 324
C
Non Established
9) FUZE PERCN. D.A. NO.117 MK-20 EMPTY WITH CAP TO DES. REF. LS/10744/GE/341 PT. NO. QX 244 GE()
IA 1204
C
Established
10) TAIL UNIT 8 A WITH CAP, DES REF CQA(A)/ AMN/2906 PART NO ITV 26 SA SPECN CQA(A) 2324()
CQA(A) 2324
C
Established
11) FUZE MINE COMBINATION M 605 ASSEMBLY EMPTY.DRG. NO. CIA/AMN/85 PT. NO. IQX 28GE SPECN CQA(A) 1803()
CQA(A) 1803
C
Established
12) FIRE TRANSMITTING TUBE TO DRG. NO. CIA/AMN/900 PT. NO. IRW 115()
DRG. NO CIA/AMN/900 PT. NO. IRW 115
C
Non Established
13) FIRE TRANSMITTING TUBE TO DRG NO ARDE 1934 DET NO 3 PART NO IRW 203 WITH PASSIVATION.()
DRG. NO.ARDE 1934 PT. NO. IRW 203
C
Established
14) FUZE (EMPTY) FOR ROUND 40 MM MGL DRG. AFK/SK -576-09 Sht. 1()
DRG. NO. AFK/SK -576-09 Sht. 1
C
Non Established
15) TAIL UNIT 2A WITH TAIL ADAPTER DES REF CIA/AMN/1397 DRG PT NO ITV 11A FOR TAIL UNIT AND PT NO ITV-47()
DRG. NO. CIA/AMN/1397 PT. NO. ITV 11A
C
Non Established
16) FUZE PERCUSSION DA NO 161 (M-3) CIA/ AMN/269 PART NO IQX 33 SPECN. CQA(A) 0920()
CQA(A) 0920
R
Non Established
17) 105 MM LONG RANGE INERT ROCKET (LRIR) EMPTY ASSEMBLED AS PER DRG.NO. NASK 987()
DRG.NO. NASK 987
C
Non Established
18) 105 MM MEDIUM RANGE INERT ROCKET (MRIR) EMPTY ASSLY. AS PER DRG. NO. NASK 989()
DRG. NO. NASK 989
C
Non Established
19) ROUND 40 MM DRILL ( PRACTICE ) DRG. NO. AFK/SK-694-11()
Specification : DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.
C
Nonestab
18) SAFETY LOCK ASSEMBLY (9911356455)[99]()
Specification : DRG.NO. bw 042-512-Cb DC NO. 34241-A DT. 24/9/87
C
Nonestab
19) EMPTY FUZE B-25M TO DRG.TRD-1778 (9911357354)[99]()
Specification : EMPTY ASSY.FUZE 25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
C
Nonestab
20) TIME & IMPACT FUZE FFV-447 EMPT ASY (9911351073)[99]()
Specification : TIME AND IMPACT FUZE FFV-447 (EMPTY ASSY) TO DRG PT NO. IQX-69GE DC NO. 36650-A DT.26/2/00 SPECN:- F-1301-910540-K(CQA-0910) DC 36613-A DT 11/11/99.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR TIME AND IMPACT FUZE FFV-447 (EMPTY) IS ENCLOSED.
C
Estab
21) FUZE A670 M ASSY (EMPTY) EX-FD/LP (9911353080)[99]()
Specification : NOSE FUZE GRADE A-670M ASSEMBLY (EMPTY) TO DRG NO.____3.140 -039____ DC(I)-34241-A DATE 24/9/87 PROGRAMME AND TEST PROCE-DURE AS PER ALBUM NO.D-2040, SHEET NO.____3.140.039____(12 SHEETS) DC-34241-A DTD 24/09/87.
C
Nonestab
22) CARBON NOZZLE BLANK FOR 84 HEAT-551 (9911357920)[99]()
Specification : CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.
Specification : SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt
C
Nonestab
30) SLIDING RING TO DRG.NO.TRD-1-2-2264 (9911357851)[99]()
Specification : SLIDING RING TO DRG.NO.TRD-1-2-2264.
C
Nonestab
31) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)[99]()
Specification : SPACER TO DRG.NO.TRD-2-2-2273.
C
Nonestab
32) SPRING WASHER TO DRG.NO. TRD-1-22267 (9911357852)[99]()
Specification : SPRING WASHER TO DRG.NO.TRD-1-2-2267.
C
Nonestab
33) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]()
ALUMINIUM(DISC) COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.
C
NOT ESTABLISHED
14) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)()
BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
NOT ESTABLISHED
15) PLUG LAUNCHER PED 902-01-401 (9911356473)()
DRG NO. 902-01-401 DC-17988-W DT. 20-06-1994. MATERIAL: ACRYLONITRILE BUTADIENE RUBBER COMPOUND TO SPECN.:-IND/ME/914(PROV) DC-3496-ME DT.06-02-98GRADE C OR D HARDNESS 55 TO 70.
C
NOT ESTABLISHED
16) SET 14 ITEMS WITH PERFORATED DISC (9911356669)()
AS PER SPECIFIED DRGS.
C
NOT ESTABLISHED
17) ASSY OF S&A(EMPTY) COMPONENTS PFFC (9911357765)()
AS PER SPECIFIED DRGS.
C
NOT ESTABLISHED
18) SAFETY LOCK ASSEMBLY (9911356455)()
DRG.NO. bw 042-512-Cb DC NO. 34241-A DT. 24/9/87
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()
Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL[70]()
Specification : SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071[70]()
Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL[70]()
Specification : ASUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL
C
Nonestab
2) PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR[70]()
Specification : PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
2) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()
Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CARRIER AMMUNITION 16A FOR MORTAR BOMB 81MM ILLG. 2A()
IA 1169
C
2) SET OF 8 COMPONENTS FOR SHELL 105MM IFG BE SMOKE()
CQA(A) 4921
C
3) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A()
CQA(A) 2345
C
4) TAIL UNIT 8A WITH CAP FOR MORTAR BOMB 51MM SMOKE 2A()
CQA(A) 2324
C
5) BODY UPPER FOR MORTAR BOMB 81MM ILLG 2A()
CQA(A) 2345
C
6) UPPER SET FOR MORTAR BOMB 51MM ILLG.()
CQA(A) 2328
C
7) LOWER SET FOR MORTAR BOMB 51MM ILLG.()
CQA(A) 2328 & CQA(A) 2332
C
8) FUZE DA NO. 213 P T&P MK-5 (M-3) EMPTY FOR M.B. 81MM ILLG.2A()
L-9974F (L) DRG. NO. ARDE 1967 PART NO. IQX67GE
C
Non Established
9) FUZE DA NO. 213 P T&P MK-5 (M-2) EMPTY FOR SHELL 105 MM ILLG / BE SMOKE / COLOUR SMOKE()
L-9974F (L) DRG. NO. CIA/AMN/1763 PART NO. IQX 53 GE
1. PLUG IGNITR TO DRG.NO. 02676-300002A203 2. PROTECTIVE DISC.ASSEMBLY TO DRG.NO.02676-300001A203
C
Non Established
62) SIGNAL FLARE (ASSY) FOR INDIAN NAVY()
DRG.NO.NASK 864/1(PROV)CONSISTING OF1.UPPER BODY TO DRG.NO.NASK 864/1/2(PROV)2.LOWER BODY WITHFINS TO DRG.NO.NASK 864/1/3(PROV)3.PROPELLANT TUBE TO DRG.NONASK 864/7/1(PROV)4.NOSE CAP TO DRG.NO.NASK 864/1/1(PROV)5.STEEL WASHER TO DRG.NO.NASK 864/6 (PROV).
C
Non Established
63) SQUIB FOR SIGNAL FLARE ()
ASSY.(EMPTY) OF SQUIB 239-31-028 TO DRG.NO.NAI(P)188 (PROV)CONSISTING OF FOLLOWING 3 COMPONENTS (i) BODY TO DRG.NO.NAI(P)188/1(PROV) & PHENOLIC MOULDED BLOCK (SQUIB) TO DRG.NONAI (P) 188/2 (PROV) (ii) TERMINAL I TO DRG.NO.NASK 865/1/2(PROV) (iii) TERMINAL
DRG.NO.ARDE 2024/DET.1 CONSISTING OF :(1) NOSE TO DRG NO ARDE 2024 DET NO.2 (2) NOSE CAP-RING ASSY TO DRG NO ARDE 2024 DET NO.3 SHT.1 (3) TRIPOD SPRING TO DRG.NO ARDE 2024 DET NO.4(4) STRIKER TO DRG NO ARDE 2024 DET 5(5)MULTI-TOOTH LOCK WASHER B-6-4 TO IS
C
Non Established
66) BASE PLATE ASSY. FOR BOMB 3KG PRACTICE()
DRG.NO.ARDE-2024 DET 10.AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF-I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDEAL650 DT.14.03.90.
C
Non Established
67) NUT FOR BOMB 3KG PRACTICE()
DRG.NO.ARDE 2024/DET NO.16
C
Non Established
68) SAFETY PIN ASSEMBLY()
DRG.NO.ARDE 2024 DET NO 28 CONSISTING OF:(1)STRIP(2)PIN(3)FLAG RED(4)SAFETY SCREW(5)SPRING RING TODRG NOS(1)ARDE 2024/29,(2)ARDE 2024/30,(3)31 (SHTS2),(4)32,5)34 RESPECTIVELY WITH CIRCLIP LIGHT A75IS:3075/1975 Gd.10R2AND MULTITOOTH LOCK WASHER B6-4 IS : 5
DRG.NO.ARM 1108 C-1 CONSISTING OF-1) BODY ARM 1108 C2 (2) SCREW NECK ARM 1108 B3 3) PLUG CAP ARM 1108 A5 (4) SCREW CAP ARM 1108 A4 5) BASE & SPIKE ARM 1108 A6.
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF HOLDER PRIMARY CHARGE & ADAPTER PRIMARY CHARGE FOR SHELL 155MM ILLG. M1A1[63]()
Specification : DRG. NO. 2439A22010 & 2439A22011
C
Nonestab
Category : ddp
Grade : Grade II
Size :
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CARTG. SQUIB OPERATED CUTTER R-4 [62]()
Specification : DRG. NO. ARDE 2062 DET NO.1(EMPTY ASSY) & SPECN.NO.ARDE/SPECN/340 FORCING PIN ASSY. TO DRG.NO.ARDE-2062 DET.NO.07 AMENDED WIDE AL NO.18/2015.DC RCMA(AA)/1426/2 DT.10/08/15.
5) PZM NOZZLE Casting & Machining Left & Right [65]()
Specification : Drg No-ERD1040,Det-1,Det-2
R
Estab
6) STD CASSETTE CONTAINER[42]()
Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8
R
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) ALUMINIUM CONTAINER[65]()
Specification : Drg. No. OFBA/PETN/23
R
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) ALUMINIUM CONTAINER[65]()
Specification : Drg. No. OFBA/PETN/23
R
Estab
2) SPECIAL CASSETTE CONTAINER[42]()
Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8
R
Estab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER HOUSING PART NO 5229169 LF 9911358424[99]()
Specification : BOOSTER HOUSING PART NO.5229169 TO OEM DRG.NO.304084449/ TRD.DRG.NO. 3.2.2653
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) PACKAGE 155MM()
DRG NO.4085561 WITH D.C.NO.35637-A TO ALL COMPONENTS AND CONNEC-TED DRAWINGS
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP KG 4 FOR A30 T DETONATOR[65]()
Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10
C
Nonestab
2) CUP YA 5 FOR A30 T DET[65]()
Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321[99]()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) PRIMER ELECTRIC NO N30MK1 EMPTY[62]()
Specification : ERDL DRG 971, DET NO.1ARD NO-2374 DT.31.01.08 SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRG NO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT: ERDL DRG 971 DET NO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SAFETY LOCK ASSY.()
AS PER REQUIRED DRG. & SPECIFICATION
C
Nonestab
Category : DDP,DP
Grade : II
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SAFETY LOCK ASSY.[69]()
Specification : AS PER REQUIRED DRG. & SPECIFICATION
C
Nonestab
2) Link for AO-18/AK-630 Drg. no.3-AO-18.001. AS PER TECH. SPECN: NO. 3-AO-18.001-TY/NASK-835 (PROV.)[72]()
Specification : AS PER DRAWING
C
Nonestab
3) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
4) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]()
Specification : AS PER DRAWING
C
Nonestab
5) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 " PISTOL[70]()
Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL
C
Nonestab
Category : p
Grade : Grade III
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SAFETY LOCK ASSY.[69]()
Specification : AS PER REQUIRED DRG. & SPECIFICATION
C
Nonestab
2) BODY SUB ASSEMBLY TO SK NO.OTE/SE/010 INF/C[62]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
3) FUNNEL TO DET NO 026 OF DRG NO 4 025998 WITHOUT SURFACE TREATEMENT[62]()
Specification : FUNNEL TO DET.NO.026 OF DRG.NO.4-025998 IN F/C (WITHOUT SURFACE TREATEMENT)
C
Nonestab
4) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Nonestab
5) Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15[62]()
Specification : . Det. no 2-1 of Store Drg No 3-024045 (SK NO-OTF/DD/023)
C
Nonestab
Category : DDP,DP
Grade : II
Size :
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1, MCT-2396, MCT-2290.()
As per required Specification
C
Not Estab.
Category : DP
Grade : II
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SCREW LOCKING HINGE PIN[70]()
Specification : AS PER D.S.CAT.No.: 5305-018166, D.C.No.:24629-SA, DATED:02/02/2000 FOR D.C.No. LATEST ISSUE TO BE FOLLOWED.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) ADAPTER TUBE ASSEMBLY()
ITV- 12 A
C
Estab.
2) TAIL UNIT-2A WITH ADAPTER()
ITV-11A
C
Estab.
3) TUBE DELAY 4 SEC. & HOUSING WITH PIN OF GRENADE 36M()
IQX- 943
C
Estab.
4) FIRE TRANSMITING TUBE FOR 81 MM AMMN.()
IRW- 115
C
Estab.
5) EMPTY FUZE B- 429()
3-016919
C
Estab.
6) FIN ASSEMBLY FOR 125 MM HE AMMUNITION()
4-024610 DET. NO.30
C
Estab.
7) CONTAINER RK-33()
4-24929 INDEX NO.3
C
Estab.
8) ANVIL FOR PRIMER GUV-7 FOR 125MM AMMN.()
3-020407 DET. NO. 3
C
9) BAFFLE FOR SHELL 155 MM SCREENING SMOKE BE ( M2 A2()
2439A -22005
C
10) CAP FOR PRIMER GUV-7 FOR 125 MM AMMN.()
3-020407 DET. NO. 3
C
11) FUZE PERCN. DA NO 117 EMPTY MK-20 WITH CAP()
QX-244 GE
C
12) FZ. PERCN. DA NO. 162 MK-8 (M-2)()
IQX - 35 GE
C
13) IGNITION TUBE FOR 120 MM HE()
IRW - 92
C
14) PLUG REPRESENTING FZ. 117 MK-20 (STEEL)()
ISX-475
C
15) PRIMER ELECTRIC 1A /L EMPTY()
IQX- 46 GE
C
16) PIN SHEARING FOR SHELL 155 MM SCREENING SMOKE BE M2A2()
2439-A 00009
C
17) CAPSULE ALUMINIUM FOR 155 MM AMMN.()
6338425
C
18) 6271134706 SHIM0.3MM FOR 130 MM CARGO()
DRG. NO. 11-347-1070
C
Established
Category : DDP
Grade : I
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) Ignition Tube for 120 mm HE[65]()
Specification : IRW 92
C
Nonestab
2) ADAPTER TUBE ASSEMBLY[65]()
Specification : ITV 12 A
C
Nonestab
3) TAIL UNIT-2A WITH ADAPTER[65]()
Specification : ITV-11A
C
Nonestab
4) FIN ASSEMBLY FOR 125 MM HE AMMUNITION[65]()
Specification : DRG. NO.4-024610 DET. NO.30
C
Nonestab
5) FUZE PERCN. DA NO 117 EMPTY MK-20 WITH CAP[65]()
Specification : DRG. NO.CQA (A) QX 244 GE
C
Nonestab
6) EMPTY FUZE B- 429[65]()
Specification : DRG. NO.CQA(A) 3-016919
C
Nonestab
7) PRIMER ELECTRIC 1A /L EMPTY[65]()
Specification : DRG. NO. CQA(A) IQX -46GE
C
Nonestab
8) TUBE DELAY 4 SEC. & HOUSING WITH PIN OF GRENADE 36M[65]()
Specification : DRG. NO. IQX - 943 & IQX - 855A
C
Nonestab
9) CAPSULE ALUMINIUM FOR 155 MM AMMN.[65]()
Specification : DRG. NO. 6387453
C
Nonestab
10) CONTAINER RK-33[65]()
Specification : DRG. NO. 4-24929
C
Nonestab
11) FIRE TRANSMITING TUBE FOR 81 MM AMMN.[65]()
Specification : IRW- 115
C
Nonestab
12) ANVIL FOR PRIMER GUV-7 FOR 125MM AMMN.[65]()
Specification : 3-020407 DET. NO. 3
C
Nonestab
13) BAFFLE FOR SHELL 155 MM SCREENING SMOKE BE ( M2 A2[65]()
Specification : 2439A -22005
C
Nonestab
14) CAP FOR PRIMER GUV-7 FOR 125 MM AMMN.[65]()
Specification : 3-020407 DET. NO. 3
C
Nonestab
15) FZ. PERCN. DA NO. 162 MK-8 (M-2)[65]()
Specification : IQX - 35 GE
C
Nonestab
16) PLUG REPRESENTING FZ. 117 MK-20 (STEEL)[65]()
Specification : ISX-475
C
Nonestab
17) PIN SHEARING FOR SHELL 155 MM SCREENING SMOKE BE M2A2[65]()
Specification : 2439-A 00009
C
Nonestab
18) 6271134706 SHIM0.3MM FOR 130 MM CARGO[65]()
Specification : DRG. NO. 11-347-1070
C
Nonestab
19) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]()
Specification : IS:277-92) HEMRL
C
Nonestab
20) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]()
Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013
C
Nonestab
35) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
C
Nonestab
Category : DDP
Grade : I
Size :
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DIAPHRAGM (NOZZLE PLATE) FOR RGB 60[12]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DIAPHRAGM FOR RGB-60[12]()
Specification : AS PER DRAWINGS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) ASSY CONTACT FOR RGB-60[13]()
Specification : AS DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[03]()
Specification : AS PER DRAWING.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) KEY AMMUNITION[10]()
Specification : 19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP PART NO 4102996 LF 9911358399[99]()
Specification : BOOSTER CUP PART NO.4102996 TO OEM DRG.NO.304075972/ TRD.DRG.NO. 3.2.2552
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF FORGED BODY FROM OFC DRG.NO.FORG.3150/1/B(PART. NO.001 & DRG.NO.4-025998)TO DRG.NO.M-11104(UPTO PRE-FINISHED STAGE BEFORE H.T.)FOR 125 MM.HEAT SHELL()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
Category : DDP,DP
Grade : I
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF FORGED BODY FROM OFC DRG.NO.FORG.3150/1/B(PART. NO.001 & DRG.NO.4-025998)TO DRG.NO.M-11104(UPTO PRE-FINISHED STAGE BEFORE H.T.)FOR 125 MM.HEAT SHELL[91]()
Specification : AS PER DRG.& SPECIFICATION
R
Nonestab
2) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade I
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF FORGED BODY FROM OFC DRG.NO.FORG.3150/1/B(PART. NO.001 & DRG.NO.4-025998)TO DRG.NO.M-11104(UPTO PRE-FINISHED STAGE BEFORE H.T.)FOR 125 MM.HEAT SHELL[91]()
Specification : AS PER DRG.& SPECIFICATION
C
Nonestab
2) Receiver (PB-1) to GSF Sketch No M-9218 for 0.32[70]()
Specification : Store Drg No M-8194
C
Nonestab
3) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]()
Specification : DRG. NO. SK-8345/C
C
Nonestab
Category : p
Grade : Grade III
Size :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330685102 ELECTRIC FUZE UNCHARGED EMPTY[63]()
Specification : ELECTRIC FUZE UNCHARGED ( EMPTY) TO DRG NO. 3-027321 CD 8
1) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385
Description : ARMING PYRO DELAY EMPTY TO DRG LF 9911358385()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PYRO DELAY TUBE EMPTY LF 9911358384[99]()
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN. ()
CQA(A) DRG. NO.bw.3.140.039.cb/c, DC-34241-A, DT.24.9.87 (IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST (PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040, NO. Bw.3.140.039 II M/c (12 SHEETS) DC-
C
Not Estab.
Category : DDP,DP
Grade : I
Size :
M
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN.[63]()
Specification : CQA(A) DRG.NO.BW.3.140.039.CB/C, DC-34241-A, DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040, SHEET NO.BW.3.140.039 II M/
R
Nonestab
2) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-3
R
Nonestab
3) PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO[63]()
Specification : PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO DRG.PART NO IQX-51GE,DC-36506-A,DT.23.12.98 WITH BODY AND MAGAZINE SEPARATELY (WITH OUT ASSEMBLED CONDITION)
R
Nonestab
4) KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A[61]()
Specification : KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A,DT.21.02.95 TO SPECN.CQA(A) 1817(t) DC 37096-A,DT.06.03.2007.
R
Nonestab
5) ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985[63]()
Specification : ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985. SPECIAL REQUIREMENT: RESISTANCE ACROSS THE POINTS OF Pt-Ir WIRE SHOULD BE 1.4 TO 1.8 OMHS.
R
Nonestab
6) PLUG REPRESENTING FUZE B 429B TO DRG.NO:CQA[63]()
Specification : PLUG REPRESENTING FUZE B 429B TO DRG.NO:CQA (A)/AMN/1669 PART NO:ISX-266,DC NO-35494-A, DT. 29.04.93
R
Nonestab
7) EXPLODER CASE 3 OZ 15 DR[62]()
Specification : EXPLODER CASE (3 OZ-15 DR): EXPLODER CASE TO DRG. NO. ARM 1172 B2B DT. 15-05-86
R
Nonestab
Category : DDP,DP
Grade : I
Size :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157[99]()
Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL
E
Nonestab
Category :
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BAYONET ASSEMBLY FOR GHAATAK[70]()
Specification : BAYONET ASSEMBLY TO DRG NO. RFI SK NO. 10242 (CONSISTS OF DRG. NO. RFI SK NO. 10243 TO 10256, 10204 & 10258 TO 10265) FOR 7.62 X 39 MM ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Medak
Name
Specification
Use
Status
1) COMPONENTS AND ASSEMBLIES FOR DEFENCE AEROSPACE AND OTHER ENGINEERING INDUSTRY()
As per drawing
C
Estab
Category : DDP,DP
Grade : I
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BLANK FOR AFT CLOSURE 751 LF 9911358748
Description : BLANK FOR AFT CLOSURE 751 LF 9911358748()
Specification : BLANK FOR AFT CLOSURE 751 TO SPEC NO 00814599 MATERIAL EN-AW 7075 TO DRG NO.304200410 TO PART NO.4103408
R
Nonestab
2) BLANK FOR PLUNGER FOR 751 LF 9911358749
Description : BLANK FOR PLUNGER FOR 751 LF 9911358749()
Specification : BLANK FOR PLUNGER FOR 751 TO SPEC NO. 00814596 MATERIAL EN-AW 7075 TO DRG NO. 304101470 TO PART NO 06417888
R
Nonestab
3) BLANK FOR CARBON NOZZAL LF 9911358750
Description : BLANK FOR CARBON NOZZAL LF 9911358750()
Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) VALVE PART NO 404038806 LF 9911358407
Description : VALVE PART NO 404038806 LF 9911358407()
Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918
Description : AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918()
Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) Device for loading & unloading of Cartridge Belts Assy.()
6CH16CBCB
C
NOT ESTABLISHED
Category : P
Grade : I
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RAKOVs LINK LOADING MACHINE ASSY 56 YUL 428A CBCB[62]()
1) MACHINING OF FORGED BODY FROM OFC DRG NO FORG 3150 1 C PART NO 001 DRG NO 4 025998 TO DRG NO M 11505A UP TO PRE FINISHED STAGE BEFORE HT FOR 125MM HEAT SHELL I C 914003380[91]()
Specification : MACHINING OF FORGED BODY FROM OFC DRG. NO. FORG. 3150/1/C (PART NO. 001 & DRG. NO. 4-025998) TO DRG. NO. M-11505A (UP TO PRE-FINISHED STAGE BEFORE HT) FOR 125MM HEAT SHELL (I/C-914003380)
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHUTTER SPRING TBRL LF NO 9911358297[99]()
Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1
C
Estab
2) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
3) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Estab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524[99]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]()
Specification : SELF TAPPING SCREW TO DRG NO.TRD 121932
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300
Description : SHUTTER PLATE TBRL LF NO 9911358300()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
R
Nonestab
2) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529
Description : 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP Y1 3[64]()
Specification : 6410120650 CUP Y1-3 -[IGNITING PRIMER MG-8] TO DESIGNER REF NO. CQA (A)/AMN/2855.DC NO.37271-A DT.08.11.10 SCANNED DT. 05.01.2011 HEIGHT SHOULD BE FROM 1.30MM TO 1.40MM OUTSIDE DIAMETER SHOULD BE 2.35MMTO 2.38MM. NOTE: - EDGES SHOULD B
C
Nonestab
2) CAP K3 2[64]()
Specification : 6410120620 CAP K3-2 [IGNITING PRIMER MG-8] TO DESIGNER REF. NO. CQA(A)/AMN/2854.DC NO.37271-A, DT.08.11.10 SCANNED ON DT.05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGES SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SH
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SRGM 76 62 MM PRIMER SUB ASSY EMPTY LF 9911358760[99]()
Specification : SRGM 76/62 MM PRIMER SUB-ASSY.(EMPTY) CONSISTING FOLLOWING COMPONENTS/SUB ASSY. (1) PRIMER BODY TO DRG.NO. CNA(OF) SK 435/1 (2) ANVIL TO TO DRG.NO. CNA(OF) SK435/2 (3) CAP EMPTY TO DRG.NO. CNA(OF) SK 435/3 (4) Pb-Sn FOIL TO DRG.NO. CNA(OF
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]()
Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6261109200 S D ARMING 6 1 E FOR 105MM TKSH[62]()
Specification : SHUTTER DELAYED ARMING EMPTY NO 6/1 TO DRG.PT.NO.QX-178-A,DC-35465-A,ITEM LIST FOR QX-178-A DC 35465-A DT.4.3.93.SPECN : L-10360(C) DCI-31888-A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6191700201 ADM EMPTY ASSEMBLY FOR SAM GPRS TO DRG NO 17020010000100000D AS PER QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA[61]()
Specification : QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141855521 FIRING DEVICE FOR MINE AP 1B DIR[61]()
Specification : FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CLIP TO DRG NO TX 304 LF 6430101000
Description : CLIP TO DRG NO TX 304 LF 6430101000()
Specification : CLIP TO DRG.PT.NO.TX-304 DC NO.35128-A DT 4/7/91. LOT SIZE - 525 NOS.
R
Nonestab
2) TRACER IGNITER SHELL NO 14MK6N LF 6442000110
Description : TRACER IGNITER SHELL NO 14MK6N LF 6442000110()
Specification : TRACER & IGNITER SHELL NO.14 MK-6/N EMPTY TO DRG.NO.NAD-2011(2 SHEETS) SHEET NO.1 ARD NO.2427 DT.22-10-2012.SHEET NO.2 NO ARD-2260 DT 20/1/97 TO SPECN: DNAI-IN-L1(a) (TRACER SHELL BE MADE OF SSD-32 MATERIAL ONLY)
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PLUNGER TO DRG NO TRD 1 1 3147a L F 9911358303[99]()
Specification : PLUNGER TO DRG.NO.TRD-1-1-3147 'a'
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN FOR FUZE FB 40 FOR 40 MM PFFC LF 9911358194[99]()
Specification : SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HOLDER[33]()
Specification : SHEET METAL COMPONENT
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00[99]()
Specification : SAFE & ARM DEVICE(SAD) FOR ARTY FUZE.. SAFE AND ARM DEVICE FOR FUZE PD 155 DRG.NO. 770-13-21-00
C
Nonestab
Category : dp
Grade : Grade II
Size :
M
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) DISC MOD 1 FOR RGB 60[01]()
Specification : as per enclosed specification
R
Nonestab
2) SOCKET FOR RGB 60[01]()
Specification : as per enclosed specification
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00[99]()
Specification : DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00
C
Nonestab
Category : dp
Grade : Grade II
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) PIN AND HOUSING ASSY TO DRG NO 740-22-32-00[99]()
Specification : PIN AND HOUSING ASSY TO DRG NO 740-22-32-00 GOLD PLATING TO SPEC IS:3266-1982
C
Nonestab
Category : dp
Grade : Grade II
Size :
M
1) Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00[99]()
Specification : DETONATOR CONTACT ASSY TO DRG.NO.770-12-26-00
C
Nonestab
2) BALL AND HOUSING ASSY[99]()
Specification : BALL AND HOUSING ASSY TO DRG.
NO.770-24-33-00 MATERIAL BRASS
TO SPEC.BS 249.
C
Nonestab
3) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]()
Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00.
C
Nonestab
Category : dp
Grade : Grade II
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONVERSION OF ALUMINIUM ALLOY 33 POINT 5[00]()
Specification : CONVERSION OF ALUMINIUM ALLOY 33.5 +/- 0.3 MM DIA TO SPECN. RDE - 40 IN WP CONDITION IN RUNNING LENGTH OF 2 TO 3 MTRS INTO SEMI-FINISHED CONTAINER CARTRIDGE TO OFAJ DRG. NO. FS-2956 D
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUPPORTRING RING PART NO 5211870 LF 9911358417[99]()
Specification : SUPPORTING RING PART NO. 5211870 TO OEM DRG.NO.304094939/ TRD.DRG.NO 2.2.2371
R
Nonestab
2) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
1) DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772
Description : DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772()
Specification : DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MANTLE PART NO 5211891 LF 9911358398
Description : MANTLE PART NO 5211891 LF 9911358398()
Specification : MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONVERSION OF 125 MM FORGED SHELL[43]()
Specification : CONVERSION OF 125 MM FORGED SHELL INTO SEMI-FINISHED SHELL AS PER DRG. NO SM – 1318 AND SCOPE OF WORK AS PER ANNEXURE A
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) HOUSING WITH PIN FINISHED FOR DET L F 9911358156
Description : HOUSING WITH PIN FINISHED FOR DET L F 9911358156()
Specification : HOUSING WITH PIN DRG.PT NO.IQX-85 SA.DC 36709 A, DATE.08-09-2000.
R
Nonestab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE-MACHINED BLANK STAGE 2 FOR K 4001 AS PER DRG NO.TEND 2449*1 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO.TEND 2449*1 WITH OFT
RAW MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO K 4110 WITH FIRM'S MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BAYONET K9030[70]()
Specification : BAYONET K9030
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
2) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]()
Specification : AS PER DRG NO TEND 2383 STR 2
C
Nonestab
3) GAS PORT BLOCK AS PER DRG NO K1205 STR WITH FIRMS MATERIAL[70]()
Specification : GAS PORT BLOCK AS PER DRG NO K1205 STR WITH FIRMS MATERIAL
C
Nonestab
4) FIRING PIN AS PER DRG No K 2015 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 2015 WITH FIRM'S MATERIAL
C
Nonestab
5) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Nonestab
6) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) PRE-MACHINED BARREL BLANK FOR 9MM AUTO PISTOL[70]()
Specification : PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OF
C
Nonestab
2) TRIGGER (FINISH) FOR PISTOL AUTO 9MM 1A.[70]()
Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V[79]()
Specification : BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V FOR RIFLE 5.56MM INSAS
Specification : PAWL HAMMER FOR RIFLE 5.56MM INSAS (DS CAT NO-3040-003115)
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MODIFIED LEVER CHANGE FOR 7.62MM ASSAULT RIFLE (GHAATAK) [70]()
Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK)
C
Nonestab
Category : p
Grade : Grade II
Size :
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) Sets of components consist of i Delay holder to drg no 3 016919 53 B 025 Det No 40 DC 37284 A Qty 01 nos ii Regulator Sleeve to drg No 3 016919 53 B 025Y Det No 42 Item Code 6330604401[62]()
Specification : Sets of components consist of i Delay holder to drg no 3 016919 53 B 025 Det No 40 DC 37284 A Qty 01 nos ii Regulator Sleeve to drg No 3 016919 53 B 025Y Det No 42 Item Code 6330604401
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Housing Firing Mechanism to Drawing number 30P 3014 STAR required for 40mm MGL[70]()
Specification : Housing Firing Mechanism to Drg. No. 30P 3014 STAR required for 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
C
Nonestab
2) BUSH FOR 81MM ATAL[62]()
Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
Category : ddp
Grade : Grade I
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
2) MACHINING OF TRACK LINK[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade I
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
2) MACHINING OF TRACK LINK[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
3) TRACK GUIDE TO DRG NO 172 55 013 L F NO 6120100197[61]()
Specification : AS PER OFM
C
Nonestab
4) SHOE TO DRG NO 219 35 216 6120100196[61]()
Specification : AS PER OFM
C
Nonestab
Category : ddp
Grade : Grade I
Size :
M
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SHELL EMPTY APT 30MM BMP II lf 9911350550
Description : SHELL EMPTY APT 30MM BMP II lf 9911350550()
Specification : BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432200102 STL CUP WITH SEAL HESH 120MM ARJUN[64]()
Specification : STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6473200195 DISC ALUMINIUM TO DRG NO 6387457 DCI 36490 A[64]()
Specification : DISC ALUMINIUM TO DRG.NO.6387457 DCI 36490 A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) EMPTY CUP FOR DET 100 MG[60]()
Specification : DRG. NO AFK/SK-246-05 SHT. NO. 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817
Description : PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C)
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SHELL 001 FOR 81MM SMOKE 3D6[62]()
Specification : DRAWING NO.4-26941 DET 001
C
Nonestab
2) SHELL003 FOR 81MM SMOKE 3D6[62]()
Specification : S PER DRAWING NO.4-26941 DET 040CB
C
Nonestab
3) RING IN TWO SHELL FOR 81MM SMOKE 3D6[62]()
Specification : DRG. NO. 4-26941 008
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]()
Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001
R
Estab
Category : ddp
Grade : Grade II
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN[00]()
Specification : MECH STRIKER ASSY. TO DRG NO. AFK/SK-620-09 FOR 40 MM MGL AMMN
C
Estab
Category : ddp
Grade : Grade II
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONVERSION OF BOAT TAIL FORGING[00]()
Specification : CONVERSION OF BOAT TAIL FORGING (IN HEAT TREATED CONDITIO) AS PER REF. DRG. F-448 J (OR LATEST ISSUE) IN TO BOAT TAIL MACHINED TO CQA (A) DRG. NO. 155-1150 COMPLETE WITH ANODIZING & PAINTING. INPUT MATERIAL FOR CONVERSION WILL BE PROVIDED
R
Estab
Category : ddp
Grade : Grade II
Size :
M
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTED TO 3.00 - 0.15 MM)[00]()
Specification : ROTOR SPRING TO CQA (AMMN) DRG. NO. 3-016919 DET.-14 DC(I)37284- A DT. 6.7.2011 (WIDTH OF STEEL STRIP TO BE RESTRICTEDTO 3.00 - 0.15 MM)
C
Estab
Category : ddp
Grade : Grade II
Size :
M
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) CASSETTE FOR ERA T 90[42]()
Specification : CASSETTE (TOP & BOTTOM) FOR ERA T-90; A SET OF CASSETTE CONSIST OF ONE NO. OF ERA CONTAINER AS PER DRG. NO. HEMRL/EDS/AERA/T-90 DRG/001/1 AND ONE NO. OF ERA LID AS PER DRG. NO. HEMRL/EDS/AERA/T-90/DRG/001/2
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]()
Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]()
Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A"
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) LOCKING NUT TO CQA A DRG NO 3 016919 DET 55 DC 37284 A DT 06 07 2011[63]()
Specification : LOCKING NUT TO CQA(A)”DRG NO. 3-016919 DET-55DC-37284-A DT.06.07.2011
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE CANDLE ASSEMBLY FOR SHELL 155MM ILLG M1A1[63]()
Specification : DRG NO. 2440A20008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6011500100 CUP DETONATOR PART NO ITX 57[60]()
Specification : CUP DETONATOR PART NO. ITX -57, FOR DET APM-16, DC 37221-A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Grey Iron Foundry
[ENR Registration]
Name
Specification
Use
Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies.
Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.()
Specification : Drg. No.ITW-63
C
Estab
2) Machining of Lifting Plug.
Description : Machining of Lifting Plug.()
Specification : As per Drawings.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) STABILIZER BLADE (FIN) FOR 125MM HE
Description : STABILIZER BLADE (FIN) FOR 125MM HE()
Specification : DRG.NO.4-024610,DET.NO.024
C
Estab
2) MAGAZINE
Description : MAGAZINE()
Specification : As per OFDC Specification
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) STABILIZER BLADE (FIN) FOR 125MM HE
Description : STABILIZER BLADE (FIN) FOR 125MM HE()
Specification : DRG.NO.4-024610,DET.NO.024
C
Estab
2) MAGAZINE
Description : MAGAZINE()
Specification : As per OFDC Specification
C
Estab
Category : dp
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BIPOD ASSEMBLY REQUIRED FOR LMG BELT FED[70]()
Specification : BIPOD ASSEMBLY AS PER DRG.NO. 1804 01 08 00 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
2) TRIGGER MECHANISM ASSEMBLY REQUIRED FOR LMG BELT FED[70]()
Specification : TRIGGER MECHANISM ASSEMBLY AS PER DRG.NO. 1804 01 01 02 00 000 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BIPOD ASSEMBLY FOR GPMG MMG EXPORT[70]()
Specification : BIPOD ASSEMBLY FOR GPMG 7.62X51MM/MMG(EXPORT) DRG. NO. SK-MMGU-6326
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7()
Specification : CQA(A) 2324
C
Estab
2) CTD 81 MM MOR BOMB 3A EMPTY IRE 3GE()
Specification : CQA (A) 2348
C
Estab
3) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY()
Specification : CQA (A) 2348
C
Estab
4) SRIR (EMPTY) (TYPE E, C & H) TO DRG.NO. NASK 990/1 (PROV)()
2) SET OF PYRO SQUIB OPERATOR II-253ME[6099990159]()
Specification : DRG .NO. NASK--- 1089/1 (PROV.)
C
Nonestab
3) SQUIB PLUG BRIDGED FOR IGNITER[6099990231]()
Specification : DRG. NO. ERDL,1164 DET. 2
C
Nonestab
4) COMPONENTS FOR SQUIB PSQ 6[6099990236]()
Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
C
Nonestab
5) BRIDGED SQUIB[6099990414]()
Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98
Specification : DRG NO 8801 00 01 00 00 000 12TA WITH BELT ASSY TO DRG NO 8801 00 02 00 00 000 12TA BUT W/O 1.HE FILLING TO DRG(8801 00 01 00 02 000 00TA)NASK 873 P) 2. CE PELLET ASSY 3. DET ELEC NO 79 MK1 & 4) TIMER ASSY TO DRG NO 8801 00 01 01 06 000 0
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF FORGED BODY FROM OFC DRG.NO.FORG.3150/1/B(PART. NO.001 & DRG.NO.4-025998)TO DRG.NO.M-11104(UPTO PRE-FINISHED STAGE BEFORE H.T.)FOR 125 MM.HEAT SHELL[91]()
Specification : AS PER DRG.& SPECIFICATION
R
Nonestab
2) Receiver Blank to Drg No M-9403B for 0.32 " Pistol[70]()
Specification : Store Drg No M-8194B
C
Nonestab
3) RECEIVER IN FINISH CONDITION WITHOUT NICKEL PLATING TO DRG NO M 8194 B[70]()
14) COMPONENTS FOR CARTG. 40MM MGL AMN[6099999032]()
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : ARDE/SPECN/415 (b) dt. 20.10.93 PARA 1 TO 20.
C
Nonestab
4) BODY TO DRG.ERDL 959 DET NO.1[99]()
Specification : DRG.NO.ERDL DRG. 959 DET NO.1 DT.11 NOV 86
C
Nonestab
5) CUP TO ERDL DRG 1005 DET NO.2 MRECM[99]()
Specification : DRG.NO.ERDL DRG.1005 DET NO 2 DT.19.11.2009
C
Nonestab
6) SET OF COMPONENTS FOR PYRO CARTRG.[60]()
Specification : DRG ERDL 898
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]()
Specification : CQA(A)- 2322
C
Nonestab
2) BOMB 81MM HE MORTAR C EMPTY[60]()
Specification : CQA (A) 2305 & L 8638-J
C
Nonestab
3) BOMB 81MM MORTAR B EMPTY BODY[60]()
Specification : CQA(A) 2304 & L 8638-J
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BAYONET 1A FOR 5.56MM INSAS RIFLE (DARK BLUE)[70]()
Specification : BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993 (DC-26469-SA).(COMPLETE ASSY.). FOR RIFLE 5.56MM INSAS.
C
Nonestab
2) BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V) OF RIFLE 5.56MM.INSAS.[70]()
Specification : BLANK FOR BARREL EXTENSION(UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*6-S. FOR RIFLE 5.56MM.INSAS. (MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE)
C
Nonestab
3) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
1) BALLISTIC GRADE ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN LIGHT WEIGHT SOFT ARMOUR PANEL SAP OF BODY ARMOURS 160 CM WIDE
Description : BALLISTIC GRADE ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN LIGHT WEIGHT SOFT ARMOUR PANEL SAP OF BODY ARMOURS 160 CM WIDE()
2) BALLISTIC GRADE ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN LIGHT WEIGHT HARD ARMOUR PANEL HAP OF BODY ARMOURS 160 CM WIDE
Description : BALLISTIC GRADE ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN LIGHT WEIGHT HARD ARMOUR PANEL HAP OF BODY ARMOURS 160 CM WIDE()
SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0
LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558
C
NOT ESTABLISHED
9) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)()
DRG NO.TRD-2-2-2271
C
NOT ESTABLISHED
10) PARTITION TO DRG.NO. ARDE-2184 DET-1 (9911356504)()
DRG NO.TRD 1-2-2279
C
NOT ESTABLISHED
11) PLUNGER BLANK FOR 84 HEAT-551 (9911357919)()
DRG.NO. 6417 888/DRG.NO.TRD-1-2-2293
C
NOT ESTABLISHED
12) SET OF 8 COMP.FOR DELAY UNIT OF 551. (9911357954)()
SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6
C
NOT ESTABLISHED
13) BALLISTIC CAP ASSEMBLY FOR 84MM HEAT-551 (9911357815)()
BALLISTIC CAP ASSEMBLY TO DRG.NO. 5209 540
C
NOT ESTABLISHED
14) SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866)()
DRG.NO. TRD-1-2-2265
C
NOT ESTABLISHED
15) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)()
DRG.NO. TRD-2-2-2273
C
NOT ESTABLISHED
16) SPRING 5209544 FOR HEAT-551. (9911357927)()
DRG.NO. 301100269
C
NOT ESTABLISHED
17) SPRING WASHER TO DRG.NO. TRD-1-22267 (9911357852)()
DRG.NO. TRD-1-22267
C
NOT ESTABLISHED
18) SUPPORTING RING TO DRG.NO.TRD222272 (9911357861)()
DRG.NO. TRD-2-2-2272
C
NOT ESTABLISHED
19) TAIL UNIT ASY 5216051 FOR HEAT-551 (9911357820)()
TAIL UNIT ASY 5216051 FOR HEAT-551
C
NOT ESTABLISHED
20) WARHEAD BODY ASSY. 3074 310 FOR 551. (9911357816)()
3) CONTAINER NO R4 MK-1 (IN) (EMPTY ASSY), DRG. NO. ARDE 2055,SHEET NO 6[60]()
Specification : DRG. NO. ARDE 2055,SHEET NO 6
C
Estab
4) CONTAINER NO. R 5 MK1 (EMPTY ASSEMBLY) TO DRG.NO. ARDE 2225 SHEET NO.6[65]()
Specification : DRG.NO. ARDE 2225 SHEET NO.6
C
Estab
5) SEPARATORS (FOR CARTON 23A FOR PACKING 9MM) DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA[65]()
Specification : DRG NO. CIA/AMN/2397 PART NO. ISV 213 SA
C
Estab
6) MILL BOARD AMMN 787.4 mm X 558.8 mm X 2.5 mm + - 0.35 mmTHICK TO SPECN. JSS:9310-01[14]()
Specification : JSS:9310-01:2014
R
Estab
7) PAPER WHITE FINE AMMN 762 mm X 508 mm X 0.089 mm +- 0.009 mmTHICK IN SUBSTANCE OF 84 TO 92 GRAMS PER SQUARE METRE TO SPECIFICATION JSS:9310-06[14]()
Specification : JSS:9310-06:2002
R
Estab
8) PAPER KRAFT AMMUNITION 635 MM X 482.6 MM X 125(DS CAT 8135-000 349) PLUS MINUS 5 GMS. PER SQUARE METRE. TO SPECN .JSS : 8135-017[14]()
Specification : JSS : 8135-017:2002
R
Estab
9) BOARD CARTON AMMN. SIZE 870 mm X 620 mm X 0.508 mm+- 0.051 MM THICK ( INCLUDING PURE KRAFT LINING ) TO SPECN.JSS 8135-15[14]()
Specification : JSS 8135-15 : 2010
R
Estab
10) PAPER FOR BASEWADS FOR PAPER CARTG CASES IN ROLLS OF 610 mmTO 914 mm WIDTH DIA OF ROLL 450 mm TO 600 mm TO SPECN JSS: 9310-03[14]()
Specification : JSS: 9310-03 :2010
R
Estab
11) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES SAA 12 BORE IN ROLLS OF 610 mm TO 914 mm WIDTH AND DIA OF ROLLS 450 mm TO 600 mm.SPECN.JSS 9310-03[14]()
Specification : JSS 9310-03 :2010
R
Estab
12) BOARD GLAZED CALENDERED AMMUNITION 914.4 mm X304.8 mm X 0.508 mm + - 0.051 mm THICK SPECN. JSS 8135-13[14]()
Specification : JSS 8135-13:2007
R
Estab
13) TAPE COTTON MEDIUM PROOFED 13.00 MM PLUS MINUS 1.5 MM WIDE SPECN. IND/ME/888[21]()
Specification : IND/ME/888
R
Nonestab
14) DOSUTI SCOURED BLEACHED 91CM WIDE,SL. NO IV OF TABLE 1 SPECN IS 179-1977[21]()
Specification : IS 179-1977 [SECOND REVISION] REAFFIRMED 2002 WITH AMENDMENT NO. 1 TO 5.WITH AMENDMENT NO. 1 TO 5.
R
Nonestab
15) PAPER LAMINATED SPECN. IND/ME/786[14]()
Specification : IND/ME/786
R
Nonestab
16) PAPER WRAPPING WAXED KRAFT AMMUNITION SPECN. JSS 8135-05[14]()
Specification : JSS 8135-05
R
Nonestab
Category : P
Grade : II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PAPER WHITE FINE AMMN. 762 MM X 508 MM X 0.051MM + -0.005MM THICK IN SUBSTANCE OF 42 TO 46 GRAMS PER SQUARE METRE TO SPECIFICATION JSS 9310-06:2002[14]()
Specification : JSS 9310-06:2002
R
Estab
2) CARTON AND PRINTING DETAILS FOR SA 12 BORE 65 MM SPECIAL CARTGS,TO HOLD 25 CARTGS AS PER AFK DRG NO AFK/SK-028-03, SHEET NO.1,MATERIAL TO SPECN JSS 8135-15[99]()
Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi)
C
Estab
3) BOX PACKING CORRUGATED BOARD TO HOLD 500 CARTGS. OF 8 MM /.315 INCH BALL WITH PRINTING AS PER DRG. NO. AFK/SK-244-05[65]()
Specification : DRG. NO. AFK/SK-244-05
C
Estab
4) BOARD CARTON FOR AMMUNITION WITH PURE KRAFT LINING SIZE787.4 MM X 1117.6 MM X 0.762 MM +- 0.076 MM THICK (INCLUDING KRAFT LINING ) SPECN. JSS :8135-15[14]()
Specification : JSS :8135-15:2016
R
Estab
5) BOARD CARTON FOR AMMN WITH PURE KRAFT LINING SIZE 787.4 MMX 558.8 MM X 0.508 MM + - 0.051 MM THICK (INCLUDING KRAFT LINING) TO SPECN : JSS 8135-15 [14]()
Specification : JSS 8135-15 :2010
R
Estab
6) BOARD CARTON FOR AMMN WITH PURE KRAFT LINING SIZE 787.4 mmX 1117.6 mm X 0.762 mm + - 0.076 mm THICK (INCLUDING KRAFT LINING) ONE SIDE WHITE IN COLOUR. SPECN. JSS:8135-15[14]()
Specification : JSS:8135-15:2016
R
Estab
Category : P
Grade : II
Size :
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) PLASTIC POWER PISTON W/O POUCH 65MM
Description : PLASTIC POWER PISTON W/O POUCH 65MM()
Specification : AFK DRG.NO. KF/SK-1809
R
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 1421203630
MILL BOARD 2.00X 787 X 559 MM()
Specification : JSS 9310-01:2007
R
Estab
2) 1410018278 PAPER LAMINATED GR III 127 MM WIDE
Description : 1410018278 PAPER LAMINATED GR III 127 MM WIDE()
Specification : SPECN NO. IND/ME/786(D):2013
R
Estab
3) 1410018984 PAPER LAMINATED GR II 914 MM WIDE
Description : 1410018984 PAPER LAMINATED GR II 914 MM WIDE()
Specification : IND/ME/786(D):2013 DC
R
Estab
4) 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG
Description : 1410307031 PAPER FOR BASE WAD FOR PAPER CARTG()
Specification : JSS 9310- 03: 2010
R
Estab
5) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM
Description : 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM()
Specification : SPECN. NO. JSS 8135-017
R
Estab
6) 1412879275 PAPER WRAPPING WAXED KRAFT AMMN
Description : 1412879275 PAPER WRAPPING WAXED KRAFT AMMN()
Specification : SPECN. NO. JSS-8135-05
R
Estab
7) 1418617416 PAPER CORRUGATED BOARD STD SZ TH5MM
Description : 1418617416 PAPER CORRUGATED BOARD STD SZ TH5MM()
Specification : JSS 8135 - 08 : 1998
R
Estab
8) 1418940031 PAPER LAMINATED GR I 914 MM WIDE
Description : 1418940031 PAPER LAMINATED GR I 914 MM WIDE()
Specification : IND/ME/786(D):2013
R
Estab
9) 1419828715 PAPER WHITE FINE JSS 9310-06:2002.
Description : 1419828715 PAPER WHITE FINE JSS 9310-06:2002.()
Specification : SPECN. JSS - 9310-06 : 2002
R
Estab
10) 1419828815 PAPER WHITE FINE
Description : 1419828815 PAPER WHITE FINE()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
Specification : GASKET TO DRG.NO.bW 8.685.066-01(3- 0116278), DCI NO. 34183-A, DT-28.7.87. MATERIAL WRAPPING PAPER TO SPEC. GOST-8273-75, GSM 60-120/JSS 8135-017- 2002, DC NO. 3731- ME/ 16.05.2002.
C
Estab
3) GASKET TO DRG.NO.bW 8.685.066(3- 0116278),DCI NO.34183-A,DT-28.7.87.MATERIAL CARD BOARD
Description : GASKET TO DRG.NO.bW 8.685.066(3- 0116278),DCI NO.34183-A,DT-28.7.87.MATERIAL CARD BOARD()
Specification : GASKET TO DRG.NO.bW 8.685.066 (3- 0116278), DCI NO.34183-A, DT-28.7.87. MATERIAL CARD BOARD TO SPEC. GOST-7933-75/ JSS 8135-15- 2010, REV-2, DC-4066-ME, DT.19.07.10.
C
Estab
4) PAPER BROWN(WAXED),280*195(MM)
Description : PAPER BROWN(WAXED),280*195(MM)()
Specification : MATERIAL PAPER WRAPPING WAXED KRAFT AMMN. TO SPEC.JSS-8135-05-2013, REV.4 DC-5186-ME DT.19.03.14.
C
Estab
5) PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT
Description : PAPER BROWN (WAXED),320*280(MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT()
Specification : PAPER BROWN (WAXED), 320x280 (MM) TO MATERIAL PAPER WRAPPING WAXED KRAFT AMMN. TO SPEC. JSS-8135-05 -2013, REV-4 DC NO-5186 ME DT.19.03.14.
Specification : CLOTH CALICO (915 MM WIDTH) WHITE TO IS-5088-1982, VERITY NO-5 (1ST.REV. WITH AMMEND NO.1) (FOR COTTON TEXTILES FOR AMMUNITIONS).
R
Estab
2) WAX PAPER KRAFT CUP DISC TYPE,SIZE: 194 DIA+/- 1MM ,THICKNESS-0.18MM
Description : WAX PAPER KRAFT CUP DISC TYPE,SIZE: 194 DIA+/- 1MM ,THICKNESS-0.18MM()
Specification : WAX PAPER KRAFT CUP DISC TYPE, SIZE- 194 DIA+/- 1MM ,THICKNESS-0.18MM) MATERIAL-PAPER KRAFT AMMN. TO SPECN-JSS-8135-17-2016 REV-1 SUBSTANCE-125+/-5GSM (NOTE-MATERIAL WAXED WITH PARAFFIN WAX SPECIAL TO SPECN-JSS- 9160-06-2002 REV-2, REFD-
C
Estab
3) DISC-II NO.23
Description : DISC-II NO.23()
Specification : OST-84-796-78, INDIGENOUS EQUIVALENT MATERIAL- BOARD GLAGED CALANDER AMMN TO JSS-8135-13-2007, REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS-9310-01-2007-REV.2.
C
Estab
4) CYLINDER TO DRG.NO.BL/CD/CC-130/035 DT.16.04.2001. (REF. DRG. NO:3-022483/54-bH
Description : CYLINDER TO DRG.NO.BL/CD/CC-130/035 DT.16.04.2001. (REF. DRG. NO:3-022483/54-bH()
Specification : CYLINDER TO DRG. NO.BL/CD/CC-130/035 DT.16.04.2001. (REF. DRG. NO.3-022483/54-bH-482/13, DC NO. 36134-A, DT.04.07.96 NOTE-TO BE SUPPLIED AS PER SMALL CYLINDER OF SIZE- LENTH-50MM x ID-115MM.
C
Estab
5) NORMAL COVER TO DRG.3-022483/54-bH- 482
Description : NORMAL COVER TO DRG.3-022483/54-bH- 482()
Specification : NORMAL COVER TO DRG.3-022483/54-bH- 482/Cd18, DC NO.36134-A, DTD.04.07.96.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) DISC PWF(0.79") 20.07MM DIA,0.051MM THICK TO SPECN
Description : DISC PWF(0.79") 20.07MM DIA,0.051MM THICK TO SPECN()
2) DISC(WAXED)128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO
Description : DISC(WAXED)128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO()
Specification : DISC (WAXED)128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO.ISV-483 GA. DC-35983-A DT.29.07.95 MATERIAL MILL BOARD TO SPEC JSS- 9310-01-2014 REV-3 DC-5290-ME DT-16.12.14.
C
Estab
3) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA
Description : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA()
Specification : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95. MATERIAL- MILL BOARD TO JSS-9310-01-2014 REV-3 DC.5290 ME DTD-16-12-14.
C
Estab
4) DISC TO DRG.NO.FD 537 TO DRG. PART NO
Description : DISC TO DRG.NO.FD 537 TO DRG. PART NO()
Specification : DISC TO DRG.NO. FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96.
C
Estab
5) STRENGTHENED COVER TO DRG.3-022483
Description : STRENGTHENED COVER TO DRG.3-022483()
Specification : STRENGTHENED COVER TO DRG.3-022483 /54-bH-482/12, DC NO. 36134-A, DT.4.07.96.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PAPER TUBE (AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO
Description : PAPER TUBE (AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO()
Specification : PAPER TUBE (AP/T) ID - 17A5mm X OD - 18.1 C5mm X L - 19.5B8Amm TO MATERIAL SPECN. PAPER CRAFT AMMN.TO JSS-8135-017-2002, REAF-2010 DC-5016-ME, DT-16.03.11.
C
Estab
2) PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE
Description : PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE()
Specification : PAPER WHITE FINE, SIZE - L-762 X W-508 (MM), SUBSTANCE 42-46 GRAM/SQ.METRE AND THICKNESS - 0.051 +/-0.005MM TO SPECN.JSS-9310-06- 2002, DC NO. 3738-ME, DT.17.09.2002 (REAFFIRMED 2011).
C
Estab
3) DISC TO DRG. CIA/AMN/1901 DETAIL.2 PART NO: IQX-783 FOR PELLETSMOKE
Description : DISC TO DRG. CIA/AMN/1901 DETAIL.2 PART NO: IQX-783 FOR PELLETSMOKE()
Specification : DISC TO DRG. CIA/AMN/1901 DETAIL.2 PART NO: IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. [MATERIAL-PAPER WHITE FINE TO SPECN. JSS 9310-06-2002 REAFFIRMED 2011].
C
Estab
4) DISC PAPER WRAPPING HARD, 30.99 MMDIA.
Description : DISC PAPER WRAPPING HARD, 30.99 MMDIA.()
Specification : MATERIAL-PAPER CRAFT AMMN. TO SPECIFICATION JSS-8135 -017-2010, REV. 1 DC-5493-ME DT.24.09.2016 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO.35452-A DT.07.09.93.
C
Estab
5) DISC, 45.2MM DIA, PAPER WHITE FINE AMMN TO SPECN. JSS: 9310-06:2011,DC :5044 ME,DT.15.12.2011
Description : DISC, 45.2MM DIA, PAPER WHITE FINE AMMN TO SPECN. JSS: 9310-06:2011,DC :5044 ME,DT.15.12.2011()
Specification : DISC, 45.2 MM DIA, PAPER WHITE FINE AMMN TO SPECN. JSS-9310-06-2011, DC -5044 ME, DT.15.12.2011 TREATED WITH NC LACQUER AND DUSTED WITH FRENCH CHALK. REF. DRG.NO.CIA/AMN/2176, PART NO-ISX-77 GF, ITEM NO-3, DC-37013-A, DT.06.05.2005.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) DISC CLOTH, SIZE:31.75MM DIA x 1.14 MM THICK, CLOTH ALL WOOL(MELTON FINISH)
Description : DISC CLOTH, SIZE:31.75MM DIA x 1.14 MM THICK, CLOTH ALL WOOL(MELTON FINISH)()
Specification : JSS-8305-16-2014 (REV.3) OR CLOTH COLAR, WHITE TO SPECN. JSS-8305-21-2013 REV-3 REF. DRG. CIA/AMN/2176, PART NO-ISX 77 GF, ITEM NO-11. DC. 37013A DT.06.05.2005.
C
Estab
2) PELLET COVERING TO DRG. CIA/AMN/ 1901 DET.4, PART NO: IQX 785
Description : PELLET COVERING TO DRG. CIA/AMN/ 1901 DET.4, PART NO: IQX 785()
Specification : PELLET COVERING TO DRG. CIA/AMN/ 1901 DET.4, PART NO. IQX 785 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL-70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.03.03.93.
C
Estab
3) TUBE, PAPER TO DRG.NO.ISX 18 SA DESIGNER'S REF NO-CIA/AMN
Description : TUBE, PAPER TO DRG.NO.ISX 18 SA DESIGNER'S REF NO-CIA/AMN()
Specification : TUBE, PAPER TO DRG.NO. ISX 18 SA DESIGNERS REF NO-CIA/AMN/1900. DCI 35462-A DT.03.03.93.
C
Estab
4) MILL BOARD DISC TO SIZE: 93MM DIA x 3MM THICK (WAXED),DRG.NO:CIA/AMN/2650
Description : MILL BOARD DISC TO SIZE: 93MM DIA x 3MM THICK (WAXED),DRG.NO:CIA/AMN/2650()
Specification : MILL BOARD DISC TO SIZE- 93MM DIA x 3MM THICK (WAXED), DRG.NO. CIA/AMN/2650, DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013, ITEM -5, MATERIAL-MILL BOARD TO JSS-9310-01-2014-Rev-3 DC-5290 ME DT.16.12.2014.
C
Estab
5) DISC TO DRG.NO.2-013535/53-00-482M
Description : DISC TO DRG.NO.2-013535/53-00-482M()
Specification : DISC TO DRG.NO. 2-013535/53-00-482M/ 14, DC NO.36785-A, DT.08.10.2001.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PAPER CARTON BOARD TO JSS:8135-15-2010,REV.NO.2 DC NO.4066 ME
Description : PAPER CARTON BOARD TO JSS:8135-15-2010,REV.NO.2 DC NO.4066 ME()
Specification : PAPER CARTON BOARD TO JSS-8135-15-2010, REV.NO.2 DC NO. 4066 ME, DT.19.07.10 WITH CUPPING QUALITY SIZE-760MM x 890MM x 0.762MM THICK.
C
Estab
2) FELT DISC TO DRG.NO-6387455,DC.NO- 36569-A
Description : FELT DISC TO DRG.NO-6387455,DC.NO- 36569-A()
Specification : FELT DISC TO DRG.NO- 6387455, DC.NO- 36569-A, DT-22.06.99.
C
Estab
3) DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-
Description : DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-()
Specification : DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS-8135-13-2014, REV-3, DC. 5257-ME, DT.18.06.14 PA 1992 WAXED (REF- DESIGNERS REF. NO. CIA/AMN/2176, PART NO.ISX-77GF, ITEM NO-9 DC. 37013-A, DT.06.05.2005)
C
Estab
4) PACKING TO DRG
Description : PACKING TO DRG()
Specification : PACKING TO DRG.NO. 4-24929/3 K33/001 DC NO. 35604-A, DT.11.10.93 [MATERIAL TO SPECN. IND/ME/645(a), DC NO.3754-ME, DT.12.12.02.]
C
Estab
5) SUPPORT TO DRG
Description : SUPPORT TO DRG()
Specification : SUPPORT TO DRG.NO. 4-24929/3 K33/060 DC NO. 36735-A, DT-29.01.2001.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) MIIL BOARD (WAXED),290x200x2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD
Description : MIIL BOARD (WAXED),290x200x2.5(MM) (TOP SUPPORT) USING MATERIAL MILL BOARD()
Specification : JSS-9310-01-2014 REV-3 DC NO.5290-ME DT.16.12.14 AND PARAFFIN WAX AMMN. TO JSS-9160-09-2010 REV-1 DC.5024-ME DT.01.08.11.
Specification : USING MATERIAL SPECN. MILL BOARD TO JSS-9310-01-2014, REV. 3, DC NO.5290-ME DT.16.12.14 AND PARAFFIN WAX AMMN.TO JSS-9160-09-2016, REV. 2, DC NO. 5484-ME DT.24.09.16.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) DISC D-18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST-21641-76 OR MILL BOARD
Description - DISC D-18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST-21641-76 OR MILL BOARD()
DISC D-18B7MM x 0.5 TO 0.9 MM THICK MATERIAL SPECN. TO GOST-21641-76 OR MILL BOARD TO JSS-9310-01-2014, REV-3, DC NO.5290-ME DT. 16.12.14 OR BOARD STRAW TO SPECN. JSS-8135-11-2008 (REVISION NO.2) DC NO. 3553-ME, DT. 2.3.99 REF DRG.NO. 4-027043 P-A00E14-7
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) PAD FELT(D-45,+/-1MM,T-6.4+/-0.65MM
Description : PAD FELT(D-45,+/-1MM,T-6.4+/-0.65MM()
Specification : PAD FELT (D-45+/-1MM,T-6.4+/-0.65MM TO DRG.NO.155-1080, DC NO.36792-A, DT.01.11.2001.
C
Estab
2) STRAP TO DRG PT NO.ISV-177 SA
Description : STRAP TO DRG PT NO.ISV-177 SA()
Specification : STRAP TO DRG PT NO. ISV-177SA DC NO. 37127-A DT.30.07.07. MATERIAL- TAPE COTTON MEDIUM PROOFED SIZE- 37MM WIDE x 880 MM LONG TO SPECN. IND/ME/888(PROV) DC 3754-ME DT.12.12.2002.
Specification : TOLUENE PURE NITRATION GRADE CONFORMING TO SPECN. IS:537 OF 1967 (FIRST REVISION) REAFFIRMED 1991 WITH AMENDMENT 1 AND 2, DC-3807-ME DATED 05/05/2004
Specification : DIETHYLPHTHALATE (SPECN : IND/ME/873(A): 2015 DC 5384-ME, DT.21.12.2015 ADDL.CLAUSE: COMPATIBILITY WITH NG, WHEN MIXED WITH NG THE DEP MUST NOT LOWER THE ABEL HEAT TEST OF NG.
R
Estab
2) ACETONE
Description : ACETONE()
Specification : ACETONE SPECN: IS 170-2004 (FOURTH REVISION) reaffirmed 2015
Specification : CALCIUM CARBONATE FOR EXPLOSIVES TYPE II PRECIPITATED MATERIAL RETAINED ON 90 MICRON IS SIEVE - NIL (PERCENT BY MASS) FOR USE IN PROPELLANTS SPECN: IS 7633 - 1982 REAFFIRMED 2016. (FIRST REVISION) AMENDMENT NO. 1 DC 5372-ME DT.28-07-2015
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
R
Estab
4) CANDELILLA WAX
Description : CANDELILLA WAX()
Specification : CANDELILLA WAX TO SPECN.JSS JSS 9160-08:2010(REV NO.1) DC NO 5032(ME) DT.29/10/2011
R
Estab
5) DI OCTYL ADIPATE
Description : DI OCTYL ADIPATE()
Specification : As per requireDI OCTYL ADIPATE TO SPECN.ERDL/TRIM/PRO/RM/5 AS PER HEMRL SRP/PIN/MQAP/6 COPY NO.2 REVNO.6,DT.20/05/2015ment
R
Estab
6) Di Phenyl Amine
Description : Di Phenyl Amine()
Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI
R
Estab
7) ETHYL ACETATE
Description : ETHYL ACETATE()
Specification : SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERIAL SHOULD BEPACKED IN NEW G
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
R
Estab
4) CANDELILLA WAX
Description : CANDELILLA WAX()
Specification : CANDELILLA WAX TO SPECN.JSS JSS 9160-08:2010(REV NO.1) DC NO 5032(ME) DT.29/10/2011
R
Estab
5) DI OCTYL ADIPATE
Description : DI OCTYL ADIPATE()
Specification : As per requireDI OCTYL ADIPATE TO SPECN.ERDL/TRIM/PRO/RM/5 AS PER HEMRL SRP/PIN/MQAP/6 COPY NO.2 REVNO.6,DT.20/05/2015ment
R
Estab
6) Di Phenyl Amine
Description : Di Phenyl Amine()
Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI
R
Estab
7) ETHYL ACETATE
Description : ETHYL ACETATE()
Specification : SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERIAL SHOULD BEPACKED IN NEW G
Specification : CALCIUM CARBONATE FOR EXPLOSIVE AND PYROTECHNIC INDUSTRY(TYPE II) AS PER SPECIFICATION NO. IS-7633-1982 (FIRST REVISION) REAFFIRMED 2011. AMENDMENT NO. 1.( TYPE II MATERIAL IS REQUIRED .
R
Estab
4) CANDELILLA WAX
Description : CANDELILLA WAX()
Specification : CANDELILLA WAX TO SPECN.JSS JSS 9160-08:2010(REV NO.1) DC NO 5032(ME) DT.29/10/2011
R
Estab
5) DI OCTYL ADIPATE
Description : DI OCTYL ADIPATE()
Specification : As per requireDI OCTYL ADIPATE TO SPECN.ERDL/TRIM/PRO/RM/5 AS PER HEMRL SRP/PIN/MQAP/6 COPY NO.2 REVNO.6,DT.20/05/2015ment
R
Estab
6) Di Phenyl Amine
Description : Di Phenyl Amine()
Specification : SPCN. JSS-6810-129:2015 AND REVISION NO.3,DC NO.5395-ME DT.01.02.2016(1)PRIMARY AMINES O.10% INSTEAD OF 0.20% MAX.(2)SETTING POINT BETWEEN 51.7 DEGREE CELCIUS TO 53 DEGREE CELCIUS INSTEAD OF 51.5 DEGREE CELCIUS TO 53 DEGREE CELCIUS.(3)MOI
R
Estab
7) ETHYL ACETATE
Description : ETHYL ACETATE()
Specification : SPCN.IS 229-1993 (THIRD REVISION ) REAFFIRMED 2014 WITH INITIALBOILING POINT (IBP) MINIMUM 75.0 DEG. CENTIGRADE ANDDISTILATION RANGE NOT MORE THAN 2.5 DEG. CELSIUS WHICHSHOULD INCLUDE 77.2 DEG. CELSIUS. ( MATERIAL SHOULD BEPACKED IN NEW G
Specification : P.C.B DRG.NO: BL7.102.504 Drg No.BL7102504 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.102.504 AND SPCN.NO:OLF/MSD/PCB/01 ON GLASS EPOXY BOARD OF THICKNESS
1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR
C
Nonestab
2) PCB LF NO 9001110812[90]()
Specification : P.C.B. DRG. NO: BL7.103.829 Drg No.BL7103829 P.C.B:-SMOTP DOUBLE SIDED PTH PCB AS PER DRG.NO:BL7.103 829 AND SPCN.NO:OLF/MSD/PCB/01/MOD ON GLASS EPOXY BOARD OF THICK 1.5 MM AND COPPER FOIL THICKNESS 50 MICRO MTR. CONFORMING TO JSS-
C
Nonestab
Category :
Grade : Grade III
Size :
S
734
Wimplast Limited
Survey No. 324/4 to 7, Swami Narayan Gurukul Road, Village Kachigam, Daman and Diu
PIN1 : 396210
Phone No. : 26863426 GSTIN : 25AAACW0420B1Z6
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
C
Nonestab
Category : p
Grade : Grade III
Size :
L
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) carrier 12 A[65]()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
C
Nonestab
Category : p
Grade : Grade III
Size :
L
735
POPPYS KNITWEAR PRIVATE LIMITED
NO. 9, M.P. Nagar, First Street M.P. NAGAR, FIRST STREET TIRUPPUR, TAMILNADU, INDIA Tamilnadu
PIN1 : 641607
Phone No. : 2221144 GSTIN : 33AADFP4476C1ZH
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
6) CASING AS PER DRG.NO.NAI(V)7001/1[60]()
Specification : DRG NO:NAI(V) 7001/1 23/07/04.
C
Nonestab
Category :
Grade : Grade III
Size :
S
737
K G Denim Limited
Jadayampalayam & Post
Mettupalayam Thenthirumalai Coimbatore Tamil Nadu
PIN1 : 641302
Phone No. : 235430 GSTIN : 33AAACK7940C1ZW
4) FABRIC GREEN 205 G SPUN PV DOPE DYED 148 CM MINIMUM[21]()
Specification : PROV/S/4369/FABRIC GREEN PV/TC-11/2 (b)
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) SEWING THREAD SPUN POLYESTER OG[2101726605]()
Specification : SPECN NO:IND/TC/0296(b)EXCEPT FORLENGTH/KG (min)(m)-12800, COUNT OF YARN 250 DTEX X3. BREAKING LOAD (MIN)-(50 CM. BETWEEN GRIPS)-23000 MN.FINAL TWIST IS Z PACKING & MARKING : AS PER SCHEDULE NO.CQAT&C/PMS/36(a)
R
Nonestab
Category :
Grade : Grade III
Size :
M
739
SAFEX SAFETY & ENGINEERING
15/10, CIVIC CENTRE, NEAR VORA PETROL PUMP, JABALPUR MADHYA PRADESH
PIN1 : 482002
Phone No. : 0761-2757049, MOB:9424625546 GSTIN : 23ADDPJ6820F1ZZ
SPECN. NO. IA 1169(n) DC-35576-A DT. 8-9-93 DRG. NO. ARDE 2224 SHEET NO. 2 PT. NO. ISV 550A DC 36102-A DTD. 23.3.96
C
Not Estab.
Category : P
Grade : II
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]()
Specification : CUTTING OF 12MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020
R
Nonestab
2) CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING[90]()
Specification : CUTTING OF 16MM THICK SPADE ARMOUR SHEET BY CNC PLASMA CUTTING M/C FOR MPV AT VFJ AS PER ANNEXURE- “A” OF GM APPROVED NOTING NO. HFS/MPV/HPS/12&16/2020 DTD. 10/06/2020
R
Nonestab
Category :
Grade : Grade III
Size :
S
740
VEM INDUSTRIAL CONTROL
S-4, INDUSTRIAL AREA, SITE -A, MATHURA INDUSTRIAL AREA , SITE A MATHURA Uttar Pradesh
PIN1 : 281004
Phone No. : 2490414 GSTIN : 09ABJPP4078M1ZW
