1) BLANK FOR STUD CHANGE LEVER EXR. FOR RIFLE 5.56MM EXCALIBUR()
AS PER DRAWING
C
Not Estab.
2) PISTON (MODIFIED) FOR 7.62MM ASSAULT RIFLE (GHAATAK)()
AS PER DRAWING
C
Not Estab.
3) FOLDABLE BUTT FOR RIFLE 5.56MM INSAS. (STEEL COMPONENT).()
AS PER DRAWING.
C
Non Established
4) CYLINDER FOR 0.22" REVOLVER.()
AS PER DRAWING.
C
Non Established
5) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A. ()
AS PER DRAWING.
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Engine Factory Avadi
Name
Specification
Use
Status
1) GUIDE BUSHING()
506-17-7
E
Not Estab
2) ASSY, PISTON PIN WITH END CAP.()
304-10-5 & 304-11-10
E
Not Estab
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG FASTENING 250KG()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
2) PLUG DUMMY 250KG()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
Category : DDP,DP
Grade : I
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG FASTENING 250KG[62]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
2) PLUG DUMMY 250KG[62]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
3) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
4) MACHINING OF LUG 318[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
5) MACHINING OF TRACK GUIDE[61]()
Specification : AS PER OFM APECIFICATION
C
Nonestab
Category : DDP,DP
Grade : I
Size :
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONTAINER FOR ROCKET LINK ASSEMBLY AS PER DRG. NO. 8603-01-01-01 10-000-00XA()
AS PER REQUIREMENT
C
Category : DDP
Grade : I
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG NO ADRDE 1408 FOR AN 32 PLATFORM 6245001408[62]()
Specification : ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG.NO.ADRDE-1408 FOR AN-32 PLATFORM.
C
Nonestab
2) BLANK FOR SAFETY CAP TO OFAJ DRG NO FS 2955 FOR FUZE 162 MK 8 AND MK 9[00]()
Specification : BLANK FOR SAFETY CAP TO OFAJ DRG. NO. FS-2955 FOR FUZE162 MK-8 & 9.
R
Nonestab
3) BODY SEMI FINISHED TO OFAJ DRG NO FS 1851 E[00]()
Specification : BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E
C
Nonestab
4) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92[00]()
Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92
C
Nonestab
5) BODY TO DRG NO IQX 815 FOR FUZE 213 MK 5 M4[00]()
Specification : BODY TO DRG.NO.IQX-815 FOR FUZE 213 MK-5 (M-4)
C
Nonestab
6) CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NO FS 2956 C[00]()
Specification : CONTAINER CARTRIDGE SEMI FINISHED TO OFAJ DRAWING NOFS2956C(ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION).
C
Nonestab
7) CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO FS 2956C ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE SO FIRMS TO INDICATE THE SAME IN THE QUOTATION[00]()
Specification : CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION)
C
Nonestab
8) CONTAINER CARTRIDGES FULLY FINISHED TO DRG NO ITV 30 DC 37344 A[00]()
Specification : CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A
C
Nonestab
9) CONVERSION OF AL ALLOY TUBE OD 88 X ID 60 ITEM CODE 170095PR46 TO BLANKS FOR ILLU SHELL BODY TO DRG NO FS 2915A[00]()
Specification : CONVERSION OF AL. ALLOY TUBE OD 88 X ID 60 (ITEM CODE : 170095PR46) TO BLANKS FOR ILLU SHELL BODY TO DRG. NO. FS-2915A
R
Nonestab
10) CONVERSION OF AL ALLOY ROD 65 MM DIA ITEM CODE 170092PR46 TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG NO CC 532 C[00]()
Specification : CONVERSION OF AL.ALLOY ROD 65 MM DIA (ITEM CODE:170092PR46) TO SLUG FOR TPT DISTANCE TUBE AS PER OFAJ DRG.NO.CC-532 C.
R
Nonestab
11) CONVERSION OF AL ALLOY TUBE 60 plus point5 MM ID SND 13 plus 1 mm TH TO BLANKS FOR ILLU SHELL BODY TO DRG NO FS 2915[00]()
Specification : CONVERSION OF AL.ALLOY TUBE 60.00 +/-0.5 MM ID & 13.00 +1.0O mm TH.TO BLANKS FOR ILLU. SHELL BODY TO DRG.NO. FS-2915.
C
Nonestab
12) CONVERSION OF AL ALLOY TUBE OD 88 X ID 68 ITEM CODE 170094PR46 TO BLANKS FOR STABILIZING TUBE TO DRG NO FS 2914 A NO[00]()
Specification : CONVERSION OF AL.ALLOY TUBE OD 88 X ID 68 (ITEM CODE : 170094PR46) TO BLANKS FOR STABILIZING TUBE TO DRG. NO.FS-2914 A NO.
R
Nonestab
13) CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917[00]()
Specification : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917.
R
Nonestab
14) CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG NO CG 82 D INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG NO FS 2919 BY TURNING MILLING AND DRILLING OPERATION[00]()
Specification : CONVERSION OF STABILIZING TUBE BLANK COLD EXTRUDED AS PER DRG.NO.CG-82 "D" INTO SEMI FINISH STABILIZING TUBE AS PER OFAJ DRG.NO. FS-2919 (BY TURNING, MILLING AND DRILLING OPERATION )
R
Nonestab
15) COVER OF OBTURATOR TO OFAJ DRG NO FS 2456 A[00]()
Specification : COVER OF OBTURATOR TO OFAJ DRG.NO.FS-2456 A
C
Nonestab
16) COVER FOR DUMMY TRAINING CHARGE 125MM 2527087072[00]()
Specification : COVER AS PER DRAWING NO.4-026706 011 FOR DUMMY TRAINING CHARGE 125MM.
C
Nonestab
17) DOME TO DRG NO IQX 816 FOR FUZE 213 MK 5 M4[00]()
Specification : DOME TO DRG.NO.IQX-816 FOR FUZE 213 MK-5 (M4)
C
Nonestab
18) NOZZEL TO ARDE DRG NO 1135 DET 10[00]()
Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14
C
Nonestab
19) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301047062E DC36160 A DT 31 08 96[00]()
Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96
C
Nonestab
Category : DDP
Grade : I
Size :
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]()
Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BODY FROM RAW MATERIAL DRAWING NO. NAI(J)/501/1. (R/M: 133002022)[91]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TOP PLUG TO DRG. NO. NAI(J) 501/2 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) THREADED BUSH TO DRG. NO. NAI(J)/501/21 IN FINISHED CONDITION[63]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TRIGGER TO DRG. NO. IQX-316 IN F/C FOR FMC M-605 DC NO. 36997-A DT. 25.01.2005[63]()
Specification : AS PER DRAWING
C
Nonestab
2) HEAD SAFETY FOR FMC M-605 EMPTY TO DRG NO. IQX-311 IN F/C DC. NO.35828-A dt. 18.10.94[63]()
Specification : AS PER DRAWING
C
Nonestab
3) HEAD FLASH IGNITER TO DRG. NO. IQX-306 IN F/C FOR FMC DC. NO. 35573-A DT. 02.09.93[63]()
Specification : AS PER DRAWING
C
Nonestab
4) PLUG TO DRG. NO. IQX-313 FOR FUZE MINE COMBINATION (F/C)[63]()
Specification : AS PER SPECIFICATIONS
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BODY TO DRG NO TF-007 IN FINISHED CONDITION[63]()
Specification : AS PER DRAWING
C
Nonestab
2) Magazine to DRG. NO. IQX-1012 IN FINISHED CONDITION[63]()
Specification : Part No QX 1539 for Fuze 117 Mk-20
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) DISC TO DRG. NO. QX-351 IN FINISHED CONDITION[63]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STRIKER TO DRG. NO IQX-1000 IN FINISHED CONDITION DC(I) NO-37 263-A DT 26/08/2010[63]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LOCATOR to drg. no. (TF-013) IN FINISHED CONDITION[63]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL[91]()
Specification : FINISH MACHINING IN A SET OF FRONT PART AND REAR PART FROM INPUT MATERIAL
1) FABRICATION OF SHELL BODY (EMPTY) TO DRG. NO. NAI(J) 502/2 FROM RAW MATERIAL (I/CODE NO. 0353401032) TO BE SUPPLIED BY GSF- KOLKATA[91]()
Specification : AS PER DRAWING
C
Nonestab
2) GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED)[62]()
Specification : GRENADE BODY BLANKS TO DRG. NO FS-1813 (SEMI FINISHED)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BODY FROM RAW MATERIAL DRAWING NO. NAI(J)/501/1. (R/M: 133002022)[91]()
Specification : AS PER DRAWING
C
Nonestab
2) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]()
Specification : DRG. NO. SK-8345/C
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BODY TO DRG NO TF-007 IN FINISHED CONDITION[63]()
Specification : AS PER DRAWING
C
Nonestab
2) Magazine to DRG. NO. IQX-1012 IN FINISHED CONDITION[63]()
Specification : Part No QX 1539 for Fuze 117 Mk-20
C
Nonestab
3) Plug Representing Fuze in FC TO DRG NO M 10394[60]()
Specification : As per drg. no. M-10394
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE
Description : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE()
Specification : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BODY UPPER FLASH 2A TO DRG NO ARDE 2285 DET NO 1 PART NO ITV 276 DC 36057A DT 28 121995 AND BODY LOWER FLASH 2A TO DRG NO ARDE DET NO 2 PART NO ITV277 DC 36550A DT 13041999[62]()
Specification : DC-36057A DT 28.12.1995
DC -36550A DT 13.04.1999
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
C
Nonestab
2) BUSH FOR 81MM ATAL[62]()
Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) TOP PLUG TO OFAJ DRG.NO:S-78C[62]()
Specification : TOP PLUG TO OFAJ DRG. NO:S-78C (REF. DRG. NO. 4079922, DC NO.36817-A,DT.08.03.2002,DULY SURFACE TREATED AS PER DRG. NO. 5191819, DC NO. 34810-A, DT. 05.03.90 (PRF FOR 155MM M-107 & M77B )
R
Nonestab
Category : p
Grade : Grade I
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15[62]()
Specification : . Det. no 2-1 of Store Drg No 3-024045 (SK NO-OTF/DD/023)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02[63]()
Specification : Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LOCK[06]()
Specification : IS:5517-04 DESIGNATION 42 Cr 6 v1
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) Right hand carrier - 172.62.136[06]()
Specification : GOST:4543-71
C
Nonestab
2) Left hand carrier - 175.62.137[06]()
Specification : GOST 4543-71
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90
Description : BOLT ECCENTRIC ASSY CAT PART NO 14 5306 003416 TO CQA EE DRG CAT NO 1189K DT 9 4 90()
Specification : BOLT,ECCENTRIC ASSY CAT PART NO.14/5306-003416 TO CQA(EE) DRG.CAT.NO.1189K DT.9/4/90 .
C
Estab
2) ECENTRIC BOLT TO CQA EE DRG NO CAT NO 1403 C DC NO ES 14 224 DT 3 10 84
Description : ECENTRIC BOLT TO CQA EE DRG NO CAT NO 1403 C DC NO ES 14 224 DT 3 10 84()
Specification : ECENTRIC BOLT TO CQA(EE)DRG.NO.CAT NO.1403/C .DC.NO.ES/14/224 DT.3.10.84.
13) Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A[90]()
Specification : Air piping modular hose loose kit for MPV consisting of 34 (28+06) types of pipes as per drawing No. MPV/BRAKE/034 (MHA Version) and drawing No. AHSP/TSS/MPV/002 N/A
C
Nonestab
14) HOSE PIPE WITH CLAMPS[90]()
Specification : HOSE PIPE WITH CLAMPS DRG NO. OFPM 640-01-2560/A
C
Estab
15) HOSE PIPE ASSY III - FUEL SYSTEM (FOR MPV)[90]()
Specification : HOSE PIPE ASSY III - FUEL SYSTEM (FOR MPV) DRG NO. OFPM 640-01-2604/A
C
Estab
16) HOSE PIPE ASSY IV & V - FUEL SYSTEM (FOR MPV)[90]()
Specification : HOSE PIPE ASSY IV & V - FUEL SYSTEM (FOR MPV) DRG. NO. OFPM 640-01-2607/B
C
Estab
17) Adaptor F0122615[90]()
Specification : ADAPTOR (102-18) ADAPTOR DRG./PART NO. X 0122615 A
C
Nonestab
18) Adaptor F0129115[90]()
Specification : ADAPTOR M10 PT. No. F-0129115 ADAPTOR M10 -60 DEG X M10 -90 DEG PT.NO.F0129115-A ASSY.- AIR PIPING
C
Nonestab
19) Adaptor F7885500[90]()
Specification : ADAPTOR ADAPTOR DRG.NO. F7885300-H PART NO. F 7885500-H.
C
Nonestab
20) ADAPTOR PART NO X 0100230 C[90]()
Specification : ADAPTOR PART NO. X 0100230 C
C
Nonestab
21) Adaptor X0117615[90]()
Specification : ADAPTOR ADAPTOR PART NO. X 0117615 HASH
C
Estab
22) HOSE ASSY[90]()
Specification : HOSE ASSY
C
Estab
23) S A OF FLEXIBLE EXHAUST PIPE[90]()
Specification : S/A OF FLEXIBLE EXHAUST PIPE P.NO. B 4573702 HASE.1
C
Nonestab
24) S A Pipe LH[90]()
Specification : S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386020-ND
C
Nonestab
25) S A Pipe RH[90]()
Specification : S/A OF PIPE (AD) S/A OF PIPE (AD)PT.NO.B4386019-ND
C
Nonestab
26) SA OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING[90]()
Specification : S/A OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING
C
Nonestab
27) Steel Pipe B8002602[90]()
Specification : STEEL PIPE COMP TO AIR DRIER- STEEL PIPE COMP TO AIR DRIER-IIIRD PIPE DR.NO.B8002602-A.
C
Nonestab
28) STEERING PIPE RETURN LINE B2238210[90]()
Specification : STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE.
C
Nonestab
29) TYRE INFLATOR HOSE[90]()
Specification : TYRE INFLATOR HOSE
C
Estab
30) UNION BULK HEAD (FOR MPV)[90]()
Specification : UNION BULK HEAD DRG NO. 620-05-2001-1/A
R
Estab
31) HOSE ASSY BODY LIFT PUMP[90]()
Specification : HOSE ASSY BODY LIFT PUMP
C
Estab
32) Hose Charge Air Cooler[90]()
Specification : As per specification / drg.
C
Estab
33) HOSE FOR POWER STEERING[90]()
Specification : HOSE FOR POWER STEERING PT. NO. X 7445200 V1
C
Nonestab
34) HOSE FOR POWER STEERING F7884100[90]()
Specification : HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F7884100 (I)
C
Estab
35) HOSE FOR POWER STEERING F8823900[90]()
Specification : HOSE FOR POWER STEERING HOSE FOR POWER STEERING PT.NO.F8823900-A.
Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Link for JVPC[7012470234]()
Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Guide Piece Magazine for JVPC[70]()
Specification : Guide Piece Magazine for JVPC ,Drg. No. 0204-03-02-18-29-003-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Hammer for JVPC[7012470236]()
Specification : HAMMER FOR JVPC 5.56MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BARREL COVER ASSEMBLY FOR JVPC[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MMDRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OFBARREL COVER MOULDING BUSH BARREL COVER,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()
Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108
C
Nonestab
2) ROD FRONT SPRING RECOIL FOR JVPC[70]()
Specification : ROD FRONT SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-003-00DD
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG[70]()
Specification : CLOSING CUP DRG. NO. 0204-03-02-22-35-001-00DG
C
Nonestab
2) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Nonestab
2) BODY COVER RIGHT HAND AIR VERSION FOR MAG 7 62 MM[70]()
Specification : BODY COVER RIGHT HAND AIR VERSION MAG 7.62MM, DRG.NO.3602008030, CLASSMENT NO. 055A, PL. NO. B1898 MATERIAL SUPPLY FROM SAF AGAINST B/G.MAT..LF NO.0614279002
.
C
Nonestab
3) FEED ARM FOR AIR VERSION for MAG[70]()
Specification : FEED ARM FOR AIR VERSION TO DRG NO. 3602008380 IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING BLANK[70]()
Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Lower Feed Slide for MAG[70]()
Specification : BODY LOWER FEED SLIDE TO DS CAT NO. 1005-000475 DC(I) NO. 25303-SA DT-23/03/2002 IN FINISHED CONDITION WITHOUT HT & PLATING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CLIP for MAG[70]()
Specification : CLIP TO DS CAT NO. 5340-007354 DC NO. 27021-SA DT- 28.01.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER for MAG[70]()
Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) ROLLER FOR MAG[70]()
Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Threaded Piston Extension for CQB DRG No 1901 01 01 00 03 002 00DC[70]()
1) PISTON EXTENSION BLANK FOR CARBINE 5 56MM[70]()
Specification : PISTON EXTENSION BLANK TO DRG NO. AKC-07/01BL*1 FOR CARBINE 5.56MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) RETAINING PIN PISTON FOR MAG[70]()
Specification : RETAINING PIN, PISTON TO DS CAT NO. 5315-001530 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL
C
Nonestab
2) TRIGGER TO DRG NO 29P 0040STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
3) PIN STOP BOLT LOCKING TO DR NO 29P 0048STAR required for 0POINT315 Sporting Rifle[70]()
Specification : DRG.NO.: 29P 0048* required for 0.315" Sporting Rifle
C
Nonestab
4) SCREW PLATE BUTT TO DRG NO 29P 0059STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
5) SWIVEL SLING REAR TO DRG NO 29P 0065STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
6) SWIVEL SLING FRONT 29P 0070STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG No.29P 0070* required for 0.315" Sporting Rifle
C
Nonestab
7) SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : SUPPLY OF AUTO SEAR AS DRG NO K 2067 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
8) BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR[70]()
Specification : BAYONET AS PER DRG NO K 9030 STAR WITH FIRMS MATERIAL FOR TAR
C
Nonestab
9) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
10) Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031 for TAR[70]()
Specification : Supply of HOUSING FRONT SIGHT FOR TAR AS PER DRG No K 1031* for TAR
C
Nonestab
11) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
12) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()
Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Finish as per drawing no SK 6503 TE[70]()
Specification : Rod Finish as per drawing no SK 6503 TE
C
Nonestab
2) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN RETAINING LOCKING CATCH TO D S CAT NO 5315 001773 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1221[70]()
Specification : AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326[70]()
Specification : AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN FIXING BAND BACK SIGHT TO DRG No 29P 0006 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle
C
Nonestab
2) PIN CATCH MAGAZINE TO DRG NO 29P 0047STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
3) SUPPLY OF PIN AXIS HAMMER TO DS CAT NO 5315 009115 DC NO[70]()
Specification : AS PER DS. CAT NO. 5315-009115 DC NO.25060-SA DT. 05/07/2001 REQUIRED IN WHITE FINISHED CONDITION
C
Nonestab
4) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
5) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
6) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
7) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709 DC 36123 A DT 06 06 96[63]()
Specification : BRASS PRESSING BLANKS TO DRG. NO. 1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG. NO. QX-1709. DC 36123-A DT 06-06-96
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) CASSETTE FOR ERA T 90[42]()
Specification : CASSETTE (TOP & BOTTOM) FOR ERA T-90; A SET OF CASSETTE CONSIST OF ONE NO. OF ERA CONTAINER AS PER DRG. NO. HEMRL/EDS/AERA/T-90 DRG/001/1 AND ONE NO. OF ERA LID AS PER DRG. NO. HEMRL/EDS/AERA/T-90/DRG/001/2
1) PROTECTING RING ASSEMBLY L F NO 6220900611[62]()
Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING TO DRG. NO. 1460D. R.NO. 9 DTD. 03-11-17 {NOTE:- TO COVER UP ASSEMBLY REJECTION ITEM NO.4 SHOULD BE SUPPLIED 5% EXTRA} [DRG. ENCLOSED].
C
Nonestab
2) ROLLING RING 450 KG L F NO 6231100104[62]()
Specification : ROLLING RING ASSEMBLY FOR 450 Kg HSLD BOMB AS PER Drg.No.-ARDE-2122 DET.17 (WITHOUT PHOSPHATED) Drg.ENCLOSED, MAKE OF ITEM NOS.4,5,6 AND 7 IS LPS/UNBRAKO/GKW.
Specification : SPACER (MATERIAL- CELLULOID SHEET TRANSPARENT) TO DRG. NO. NASK 754/2 (PROV.) FOR ASSEMBLY OF CARTG. TORPEDO IMPULSE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6078650004 SET OF CELLULOID COMPTS FOR PRIMER ELEC L1A4[60]()
Specification : CELLULOID COMPTS.SET FOR PRIMER L1A4 (A)SLEEVE CELLULOID DRG
NO.QX-1566 DC 36491-A OR (ROF QX-2000) (B)SLEEVE DISTANCE
DRG.NO.QX-1147 DC 37005-A 0R (ROF QX-1999)(C)SLEEVE CAPSULE
DRG.NO.QX-1146 DC 37005-A OR (ROF QX-1998). MAT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 2101564029 SHEET CELLULOID[21]()
Specification : JSS 1375-03:2011
R
Nonestab
2) 2101564027 SHEET CELLULOID[21]()
Specification : JSS 1375-03 : 2004
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1020090300 SHEET CELLULOID 610MM[10]()
Specification : CELLULOID SHEET TRANSPARENT 0.20 MM THICK TO SPECN. NO.JSS 1375-03: 2004 (REV. NO.2)
1) Self Adhesive Polythene Bag various sizes 40x35 cm 48x38 cm 45x32cm 50x35 cm etc No minus tolerance[21]()
Specification : CQA(GS)/US/434(a)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Self Adhesive Polythene bag of size 45x35cm & 0.04 MM[21]()
Specification : CQA(GS)/US/434(a) Except sealing shall be of Adhesive type
R
Estab
2) Self Adhesive Polythene Bag Size (50x35) cm x 0.04 mm[25]()
Specification : Self Adhesive Polythene Bag Size 50 cm x 35 cm Thickness of polythene film 0.04 mm
Specification no. CQA(GS)/US/434(a), Except that the sealing will be "Self Adhesive"
R
Estab
3) Self Adhesive Polythene Bag Size (95x70) cm x 0.04 mm[21]()
Specification : Self Adhesive Polythene Bag Size 95 x 70 cm x 0.04 mm
Specification no. CQA(GS)/US/434(a) Except sealing shall be of adhesive type
R
Estab
4) Self Adhesive Polythene Bag Size 65x50 cm x 0.04 mm[25]()
Specification : Self Adhesive Polythene Bag Size 65x50 cm x 0.04 mm thick
Specification no. CQA(GS)/US/434(A) Except sealing shall be of Adhesive Type
R
Estab
5) Self Adhesive Polythene Bag Size (80x50) cm x 0.04 mm[21]()
Specification : Self Adhesive Polythene Bag Size 80 cm x 50 cm. Thickness of Poly Film-0.04 mm
Specification no. CQA(GS)/US/434(a). Except that the sealing will be "Self Adhesive"
R
Estab
6) Self adhesive Polythene Bag Size -40 cm width X 76 cm length X 0.04 mm Thick[21]()
Specification : JSS:8135-10:2004 Except Width which should be 19 mm Strap should be printed O.C.F. Shahjahanpur.
Note-"The Logo of OCFS should be printed on Plasted Strapping at a distrance of every 1/2 meter".
R
Estab
7) SELF ADHESIVE POLYTHENE BAG OF SIZE 41X31.5 CM & 0.04MM[21]()
Specification : CQA(GS)/US/434(a) EXCEPT SEALING SHALL BE OF ADHESIVE TYPE
Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS.
R
Nonestab
3) Magnesium Powder gr.III (1001491847)[10]()
Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV)
R
Nonestab
4) ALUMINIUM POWDER HEAVY GR 1 125 MICRON 1001017163[10]()
1) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)[02]()
Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 .
R
Nonestab
2) STEEL ROD 18MM BS970 080M50 CD ANL (0133001165)[01]()
Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R
R
Nonestab
3) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]()
Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT
R
Nonestab
4) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
R
Nonestab
5) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032)[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
6) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A
R
Nonestab
7) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)[01]()
Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18.
R
Nonestab
8) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)[01]()
Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s
R
Nonestab
9) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)[01]()
Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO
R
Nonestab
10) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.
R
Nonestab
11) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]()
Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st
R
Nonestab
12) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)[01]()
Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK
R
Nonestab
13) MS ROD 64MM IS-1570 GR.25C4 (0133005064)[01]()
Specification : MS ROD 64MM IS-1570 GR.25C4
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]()
Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
2) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Nonestab
3) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]()
Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED
C
Nonestab
4) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]()
Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED
C
Nonestab
5) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
2) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
3) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
4) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
5) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED]
C
Nonestab
6) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
7) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]()
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED].
C
Nonestab
8) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS.,
C
Nonestab
9) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
10) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].
C
Nonestab
11) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
12) RING NUT MCD 450 KG L F NO 6230900904[62]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
13) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED].
C
Nonestab
14) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
15) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Nonestab
16) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Nonestab
17) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]()
Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.
C
Nonestab
18) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]()
Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
2) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
Category : ddp
Grade : 3
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
2) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
3) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
4) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]()
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED].
C
Nonestab
5) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS.
C
Nonestab
6) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY ITEM CODE 6241101139[62]()
Specification : LUG HOUSING ASSEMBLY FOR 450 KG SHELL BODY AS PER ANNEXURE-A (ATTACHED
C
Nonestab
2) FILLING PLUG MACHINED LF NO 6250700174[62]()
Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)
C
Nonestab
3) LUG SUSPENSION NO 318 Item code 6250700175[62]()
Specification : LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)
C
Nonestab
4) LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173[62]()
Specification : LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]()
Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Cylinder Gas[01]()
Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Forging Blank for Front Casing for Gun Port Upgraded MPV 4X4 Drg No F 2705 57 31[90]()
Specification : Drg No. F-2705-57-31.
C
Nonestab
2) Forging Blank for Rear Casing Gun Port Upgraded MPV 4X4 Material C45 IS 2004 Drg No F 2706 57 31 A[90]()
Specification : Drg. No. F-2706-57-31/A.
C
Nonestab
3) Forging Blank for spacer Door for Gun port Upgraded MPV 4X4 Drg No F 2672 57 31 A[90]()
Specification : Drg No. F-2672-57-31/A.
C
Nonestab
4) Forging Blank for Ball Handle for Gun port Upgraded MPV 4X4 Drg No F 2742 57 31 A[90]()
Specification : Drg No. F-2742-57-31/A.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
4) Steel Forging Block Gas for MAG 7.62 MM Drg No. SKM-957 (Prov.)[01]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) St Forging Plate Bottom for MAG[01]()
Specification : DRG No. SKM-283*2
R
Nonestab
2) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]()
Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17
C
Nonestab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
R
Nonestab
3) Al Forging for Body Cover for MAG[06]()
Specification : Al. Forging for Body Cover Drg. No. SKM-174*
C
Nonestab
4) St Forging Buffer Body SKM 304[01]()
Specification : St. Forging Buffer Body DRG. No SKM 304*2
C
Nonestab
Category :
Grade : Grade III
Size :
M
938
Gola Electronics
A 16/7 , Site 4, UPSIDC IND. AREA Sahibabad Ghaziabad Uttar Pradesh
PIN1 : 201010
Phone No. : 4230023 GSTIN : 09ACYPC0880G1ZB
1) ITEM CD 9073200113 NOMENCLAUTURE THERMAL JACKET ASSY TO DRG NO 2A46M 106 C6
Description : ITEM CD 9073200113 NOMENCLAUTURE THERMAL JACKET ASSY TO DRG NO 2A46M 106 C6()
Specification : AS PER DRG
C
Estab
Category : p
Grade : 3
Size :
S
1) Gun Carriage Factory
[Deemed Registration]
Name
Specification
Use
Status
1) 9069111498 HOSE TOWING VEHICLE EMERGENCY LINE TO P1 NO M2 IAN 245 SA
Description : 9069111498 HOSE TOWING VEHICLE EMERGENCY LINE TO P1 NO M2 IAN 245 SA()
Specification : HOSE TOWING VEHICLE EMERGENCY LINE TO P1 NO M2 IAN 245 SA
C
Estab
Category : p
Grade : 3
Size :
M
1) Gun and Shell Factory
[Deemed Registration]
Name
Specification
Use
Status
1) STAINLESS STEEL STRIP TO THICKNESS 0point051 mm X WIDTH 100MM TO SPECN SANDVIK 11 R 51 EXTRA HARD ROLLED
Description : STAINLESS STEEL STRIP TO THICKNESS 0point051 mm X WIDTH 100MM TO SPECN SANDVIK 11 R 51 EXTRA HARD ROLLED()
Specification : STAINLESS STEEL STRIP TO THICKNESS 0.051 mm TO SPECN. SANDVIK 11 R 51 EXTRA HARD ROLLED. ALT. MATL. IS:6911-1922 GRADE X 04 CR.19 NI 9 COLD ROLLED CONDITION
