Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
C
Nonestab
5) BRIDGED SQUIB[60]()
Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
15) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]()
Specification : DGOF 135 (A)DT. 15-11-99.
C
Nonestab
16) CASING AS PER DRG.NO.NAI(V)7001/1[60]()
Specification : DRG NO:NAI(V) 7001/1 23/07/04.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BASE PLUG DES REF NO CIA/AMN/1799 DET NO.4, PT NO. ITW 66 SPECN: CQA(A) 1504[61]()
Specification : CQA(A) 1504
C
Nonestab
2) HOUSING DELAY SHT 2 SPECN CIA-1804[61]()
Specification : CQA(A)1804
C
Nonestab
3) SET SCREW SLOTTED HD NO 2 BA[17]()
Specification : DESIGN REF CIA/AMN/885
C
Nonestab
4) WRENCH FUZING MINE APM 16 A1[42]()
Specification : CQA(A)1804
C
Nonestab
5) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]()
Specification : DESIGN. REF CIA/AMN/1799 DETAIL NO. 8 PART NO. ITW -69 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) FILLING HOLE PLUG[10]()
Specification : DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A ,SPECN. NO. CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) RETAINING PIN & RING[10]()
Specification : DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) RETAINING PIN & RING[10]()
Specification : DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) STRIKER DET[10]()
Specification : CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) STRIKER DET[10]()
Specification : CIA/AMN/1799 DET NO.3 PART NO.ITW-65 DC 35817-A SPECN.NO. CQA(A) 1504(E) DC 35870-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) STRIKER LEVER[10]()
Specification : CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67 DC 35817-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) High Explosive Factory
Name
Specification
Use
Status
1) STRIKER LEVER[10]()
Specification : CQA ( A ) DRAWING NO. ITW - 6 GE & PART NO. ITW/67 DC 35817-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FLASH ELIMINATOR FOR RIFLE 5.56MM LMG (TO BE USED IN RIFLE 5.56MM EXCALIBUR.()
AS PER DRAWING.
C
Not Estab.
2) PRE-MACHINED BARREL BLANK FOR PISTOL AUTO 9MM 1A.()
AS PER DRAWING.
C
Not Estab.
3) BUSH, SLIDE, FRONT FOR PISTOL AUTO 9MM 1A.()
AS PER DRAWING.
C
Not Estab.
4) BLANK FOR STUD CHANGE LEVER FOR RIFLE 5.56MM INSAS.()
AS PER DRAWING.
C
Not Estab.
5) BLANK FOR STUD CHANGE LEVER EXR. FOR RIFLE 5.56MM EXCALIBUR MK-1. ()
AS PER DRAWING.
C
Not Estab.
6) FLASH ELIMINATOR FOR RIFLE 5.56MM EXCALIBUR.()
AS PER DRAWING.
C
Not Estab.
7) FINISHED COMPONENT TRIGGER FOR RIFLE 5.56MM INSAS.()
AS PER DRAWING.
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER BUSH FOR 81MM SMOKE GRENADE (9911358269)()
ADOPTER BUSH TO DRG.NO. 4-26941-007 DC NO. 35878 DTD. 20/12/94
C
NOT ESTABLISHED
2) SPACER TO DRG.NO.TRD-2-2-2273 (9911357855)()
SPACER TO DRG.NO.TRD-2-2-2273
C
NOT ESTABLISHED
3) KEY AMMN 19B STEEL (6140601600)()
KEY AMMN. 19 B STEEL TO DRG. PT. NO. IUX-96-A DC(I) 33857-A DT 30/10/85
C
NOT ESTABLISHED
4) STRIKER LEVER (6140600500)()
STRIKER LEVER TO DRG PT NO ITW-67 DC(I) 35817-A DT 27/9/94 SPECN: CQA(A)-1504(e) DC 35870-A DT 13/12/94
C
NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SCREW TO DRG PT NO QX 1761 LF 4213998077[42]()
Specification : SCREW TO DRG. PT. NO. QX-1761 DC-35465-A.
R
Estab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN FOR FUZE FB 40 FOR 40 MM PFFC (9911358194)()
SUB ASSEMBLY OF DETONATOR DISC AND PARALLEL PIN AS PER DRAWING NO. SUB ASSY 000.7369.923.0 ,PARALLEL PIN DRG.NO.000.7369.043.0,DISC DRG.NO.000.7369.003.0
C
NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP (EMPTY) FOR DEONATOR 356 MG[64]()
Specification : CUP (EMPTY) FOR DEONATOR 356 MG TO DRG.NO.QX-803,D. NO. D3(L)3934/F/83 DC NO.36103 A, DT.29.03.96.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922[62]()
Specification : TOP PLUG TO OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922,DC NO.36817-A,DT.08.03.2002,DULY SURFACE TREATED AS PER DRG.NO.5191819,DC NO.34810-A, DT.05.03.90 (PRF FOR 155MM M-107 & M77B )
C
Nonestab
2) PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO[63]()
Specification : PRIMER PERCUSSION,Q.F CARTGS.18A (EMPTY)TO DRG.PART NO IQX-51GE,DC-36506-A,DT.23.12.98 WITH BODY AND MAGAZINE SEPARATELY (WITH OUT ASSEMBLED CONDITION)
C
Nonestab
3) CASE TO DRG.PART NO.QX-172,DC NO. 35639-A[63]()
Specification : CASE TO DRG.PART NO.QX-172,DC NO. 35639-A DT.28.12.93, MATERIAL SPECN:COPPER ALLOY STRIP TO IS:3167-1982 (FIRST REVESION)(RA 1988)WITH HARDNESS 55 TO 75 VPN)
C
Nonestab
4) DISC TO PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN: LEAD[63]()
Specification : DISC TO PART NO.QX-41AF,ITEM NO:2 MATERIAL SPECN: LEAD TIN FOILTO JSS:9535-06-2010(REV.NO-2), DC NO:4085-ME, DTD.08.09.2010(FOR CAP 78G). NOTE:TOP OF THE TIN FOIL DISC TO BE COATED WITH VARNISH SHELLAC.
C
Nonestab
5) CAP COMPLETE (3 G CAP EMPTY) TO REF. NO.DD(L)17235 FOR CARTG[65]()
Specification : CAP COMPLETE (3 G CAP EMPTY) TO REF. NO.DD(L)17235 FOR CARTG. 3G/51MM, SHEET-1 DC-36972-A, DT.27.07.04,SHEET-2 DC 36972-A DT.27.07.04.
C
Nonestab
6) FIRE TRANSMITTING TUBES MKG.51MM TO ARDE-1934,[65]()
Specification : FIRE TRANSMITTING TUBES MKG.51MM TO ARDE-1934, IRW 203. DCNO.37068-A DT.14.09.2006.
C
Nonestab
7) ANVIL FOR CARTG.3G/51MM TO DRG.NO. DDL-12002, ASSY. DRG.DD(L)[65]()
Specification : ANVIL FOR CARTG.3G/51MM TO DRG.NO. DDL-12002, ASSY. DRG.DD(L)17235 FOR 51MM MORTAR BOMB. DC NO-37286-A ,DT-09.09.2011
Specification : CLIPS, 25.41MM(L)X13MM(W)X0.3MM(T) SEAL TIN(FOR STEEL TAPE BANDING SIZE 13MM WIDE) APPROX. SIZE 25.41MM LENGTH X 12.7MM WIDTH X 0.3MM THICK AND BAND OF 90 DEGREE ANGLE BOTH SIDE LONGITUDINALLY WITH HEIGHT 6.3MM.
C
Nonestab
15) KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A[61]()
Specification : KEY AMMUNITION 39A TO DRG PART NO. IUX 144A,DC NO.35916-A,DT.21.02.95 TO SPECN.CQA(A) 1817(t) DC 37096-A,DT.06.03.2007.
C
Nonestab
16) ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985[63]()
Specification : ELECTRIC FUZE UNCHARGED TO DRG.NO: 3-027321-4B2-Cd-8, DCI.33760A, DT.04.06.1985. SPECIAL REQUIREMENT: RESISTANCE ACROSS THE POINTS OF Pt-Ir WIRE SHOULD BE 1.4 TO 1.8 OMHS.
C
Nonestab
17) DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A[63]()
Specification : DISC TO DRG.3-027321-4B2-24,DC NO: 36894-A,DT-21.04.2003(THICKNESS:0.07MM + 0.012)
C
Nonestab
18) COVER TO DRG.3-027321-4B2-21[63]()
Specification : COVER TO DRG.3-027321-4B2-21,DC NO: 36050-A,DT.05.12.95
C
Nonestab
19) RING TO DRG.3-027321-4B2-23[63]()
Specification : RING TO DRG.3-027321-4B2-23,DC NO: 36811-A,DT.14.02.2002.
C
Nonestab
20) PACKING RING TO DRG.3-027321-4B2-22[63]()
Specification : PACKING RING TO DRG.3-027321-4B2-22 DC NO.36651-A,28.02.2000
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SRGM 76 62 MM PRIMER SUB ASSY EMPTY LF 9911358760[99]()
Specification : SRGM 76/62 MM PRIMER SUB-ASSY.(EMPTY) CONSISTING FOLLOWING COMPONENTS/SUB ASSY. (1) PRIMER BODY TO DRG.NO. CNA(OF) SK 435/1 (2) ANVIL TO TO DRG.NO. CNA(OF) SK435/2 (3) CAP EMPTY TO DRG.NO. CNA(OF) SK 435/3 (4) Pb-Sn FOIL TO DRG.NO. CNA(OF
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BRASS PRESSING BLANKS TO DRG NO 1896 1G FOR PRIMER 1A L MAGAZINE TO DRG NO QX 1709 DC 36123 A DT 06 06 96[63]()
Specification : BRASS PRESSING BLANKS TO DRG. NO. 1896/1G FOR PRIMER 1A/L MAGAZINE TO DRG. NO. QX-1709. DC 36123-A DT 06-06-96
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321
Description : SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321()
Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED
Specification : DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BODY UPPER FLASH 2A TO DRG NO ARDE 2285 DET NO 1 PART NO ITV 276 DC 36057A DT 28 121995 AND BODY LOWER FLASH 2A TO DRG NO ARDE DET NO 2 PART NO ITV277 DC 36550A DT 13041999[62]()
Specification : DC-36057A DT 28.12.1995
DC -36550A DT 13.04.1999
Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19
C
Nonestab
4) PLUG FOR 81MM AT AL[62]()
Specification : DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.[62]()
Specification : SET OF BODIES ASSEMBLED FOR 81MM ILLG.2A CONSISTING OF1)BODYUPPER DRG.NO.ARDE 2222 DET.NO.2 PT.NO.ITV-254 DC 37118A DT. 20.06.07 TO SPECN.CQA(A) 2345(c)DC-36513A DT.25.1.99 2)BODYSET OF ASSEMBLED BODIES 81MM ILLG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]()
Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99.
C
Nonestab
2) BODY UPPER FOR 81 MM ILLG. MK-II [62]()
Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
Specification : CQA (A) 2316
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) SINGLE PROJECTILE FOR 40MM PRACTICE[60]()
Specification : SINGLE PROJECTILE FOR 40MM PRACTICE MK-II & PROOF MK-II AS PER SPECIFICATION NO. AFK/SPECIFICATION NO. 68
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) EMPTY CUP FOR DET 100 MG[60]()
Specification : DRG. NO AFK/SK-246-05 SHT. NO. 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) METALLIC PLUG FUZE HOLE[62]()
Specification : METALLIC PLUG FUZE HOLE 2 IN NO.17 MK1 (M-1) FOR 105 MM SMOKE AS PER ASSY DRG NO. ISX 58 GE & ISX 59 GE PART NO. ISX 342.
R
Nonestab
2) SET OF 5 COMPONENTS FOR IGNITER PINAKA[61]()
Specification : SET OF 5 COMPONENTS FOR IGNITER PINAKA MK-II GUIDED DRG. NO. HEMRL/IGN/PIN MK-II/24 (1) CANISTER DET NO.3 (2) SQUIB HOLDER DET NO.4 (3) IGNITER CLOSURE DET.NO.11 (4) 'O' RING DET NO.13 (5) RETAINER DISC DET NO.14
R
Nonestab
3) ADAPTER BUSH FOR 81MM AT AL[62]()
Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19
Specification : DRG.NO.PYRO/SK/0275 Det No.24 Dt 11.04.19
C
Nonestab
6) PLUG FOR 81MM AT AL[62]()
Specification : DRG NO 902.01.401 DC NO 17988 W DTD 20/06/1994
C
Nonestab
7) RING IN TWO SHELL FOR 81MM SMOKE 3D6[62]()
Specification : DRG. NO. 4-26941 008
C
Nonestab
8) DELAY ELEMENT FOR 81MM SMOKE 3D6[62]()
Specification : NO. CIA/AMN/2498,PART NO. IQX868
C
Nonestab
9) PERFORATED DISC FOR 81MM SMOKE 3D6[62]()
Specification : DRAWING NO.3755(B)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Tail Unit 8A with Cap[62]()
Specification : SPECN.CQA(A) 2324(i) DRG.NO.CQA(A)/AMN/2906 PT.NO.ITV-26 SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) ADAPTER NOSE FOR MORTAR BOMB 81MM ILLG.2A[62]()
Specification : CQA(A) 2345
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Tail Unit 11Afor 81mm Illg. MK-II [62]()
Specification : DRG.NO ARDE 2222 DET 4 PT NO ITV 38A SPECN: CQA(A) 2346 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918
Description : AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918()
Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.
R
Nonestab
2) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527
Description : 4th SET OF 3 ITEMS FOR MMHG L F 9911358527()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
1) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]()
Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6380800110 IGNITION TUBE IRW 92 FOR 120 MM HE[63]()
Specification : IGNITION TUBE TO DRG. NO. IRW 92, DESIGNER'S REFERENCE NO. CIA/AMN/706 DC 34760-A FOR BOMB 120 MM HE.
C
Nonestab
2) 6043000400 ADAPTER NOSE FOR 81MM MK 1L TV 44[60]()
Specification : ADAPTER NOSE MORTAR BOMB NO. 1 TO DRG.PT.NO. TV 44 DC 36904-A DT.20/06/2003.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6273200062 PRF FOR SHELL 155MM ERFB BB[62]()
Specification : PRF FOR SHELL 155MM ERFB (BB/BT)/NASCHEM TO DRG. NO.PROJ/155/NASCHEM/085
E
Nonestab
2) 6330120015 PRF 117 MK 20 STL105MM IFG HE INRT[63]()
Specification : PLUG, REPRESENTING, FUZE 117 MK20 (STEEL) TO CQA(A) PART NO.ISX-475 DC-36981-A DT.12/09/04
E
Nonestab
3) 6044000162 PRF 162A FOR BOMB 120MM MORTAR HE[60]()
Specification : PLUG REPRESENTING FUZE NO.162 A TO DRG. PART NO. ITV-17 TODC NO. 37393-A DT. 22-12-2015 FOR BOMB 120 MM MORTAR INERT, FUZED A, PLUGGED A TO DRG. PART NO. ITV 7 GA TO DC NO.37393-A DT. 22-12-2015.
E
Nonestab
4) 6261102300 ADAPTER DRG PT SX 701 FOR 105MM TKS[62]()
Specification : ADAPTER TO DRG PT NO SX-701 DC 35779-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333501016 PLATE HOOK TO DRG NO 1A 793 TO PART NO ISV 7[63]()
Specification : HOOK TO DRG NO 1A 793 TO PART NO ISV 7
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]()
Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED
C
Nonestab
2) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]()
Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED)
C
Nonestab
3) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
4) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].
C
Nonestab
5) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED].
C
Nonestab
6) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
2) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) MACHINING JOB WORK OF LUG 318 ITEM CODE 9449580029[94]()
Specification : AS PER ANNEXURE-A
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) AFT CLOSURE BLANK FOR HEAT 551 LF 9911357918[99]()
Specification : AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.
C
Nonestab
2) 6th SET OF 3 ITEMS FOR MMHG LF NO 9911358529[99]()
Specification : 6th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Steel Screw (Qty-2nos), TBRL/MMG-H/BO/01/R1 2.Adaptor Screw (Qty-2nos),TBRL/MMG--H/BO/05/R2 3.Quarter Pin, TBRL/MMG-H/BO/03/R0
C
Nonestab
3) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385[99]()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
C
Nonestab
4) PYRO DELAY TUBE EMPTY LF 9911358384[99]()
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
C
Nonestab
5) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Nonestab
6) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Nonestab
7) DELAY TUBE EMPTY FOR DET 36M 7SEC LF 9911358772[99]()
Specification : DELAY TUBE (EMPTY) TO DRG.IQX 922 DC 36852-A DT.23/09/2002 FOR DETONATOR 36M 7 SEC
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CONT EXP W O SUR 250 KG HSLD L F NO 6244121304[62]()
Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
2) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Nonestab
3) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]()
Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED
C
Nonestab
4) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]()
Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY.
C
Nonestab
5) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]()
Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
6) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED].
C
Nonestab
7) FIL PLUG MCD W O SUR 250 KG L F NO 6240000504[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
8) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
9) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED]
C
Nonestab
10) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
11) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
12) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CAST STEEL EMPTY BODY MACHINED AS PER ANNEXURE A ITEM CODE 4215990739[42]()
Specification : CAST STEEL EMPTY BODY (MACHINED) AS PER ANNEXURE-A AND AS PER DRG. NO.OFM 33056
Specification : SEAR AS PER DRG.NO. ARDE/SK-2689/239 IN SOFT CONDITION DS CAT NO 1005-007736 DC(1)26924-SA DT-30.08.16
C
Estab
Category : p
Grade : 3
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLANK FOR STUD CHANGE LEVER FOR RIFLE 5.56MM INSAS.()
AS PER DRAWING.
C
Not Estab.
2) BLANK FOR STUD CHANGE LEVER EXR. FOR RIFLE 5.56MM EXCALIBUR. MK-1()
AS PER DRAWING
C
Not Estab.
Category : P
Grade : III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SLIDE RATRACTING FOR INSAS 5.56 MM()
DRG. NO. SK-3143/30
C
Estab.
2) EJECTOR FOR INSAS 5.56 MM()
DRG. NO. SK-2689/1-5
C
Estab.
3) DOVETAIL FOR INSAS 5.56 MM()
DRG NO. SK-4143/66
C
Estab.
4) SEAR FOR INSAS 5.56 MM()
DRG. NO. ARDE/SK-2689/239 R5
C
Estab.
5) LOCK RETAINER FOR INSAS 5.56 MM()
DRG. NO. SK-2689/291
C
Estab.
6) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM()
AS PER DRAWING
C
Estab.
7) BUTTON CATCH MAGAZINE FOR JVPC()
AS PER DRG.
C
Non Established
Category : P
Grade : III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLADE FORE SIGHT FOR 9MM AUTO PISTOL[70]()
Specification : BLADE FORESIGHT TO DS CAT NO. 1005-003197 to 1005-0032011005-006582 & 1005-006583 (LT. DC-26826-SA DT.06-05-16 )FOR PISTOL AUTO 9MM 1A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) ARM SEAR CONNECTING FOR 9MM AUTO PISTOL.[70]()
Specification : ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) FORE SIGHT 1005 007737 IN FINISHED CONDITION
Description : FORE SIGHT 1005 007737 IN FINISHED CONDITION()
Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C
Description : Input blank of block rear (semi finish) Drg. No. SK-4857*5 For CNC M/C()
Specification : AS PER DRG.
C
Estab
2) FORE SIGHT 1005 007737 IN FINISHED CONDITION
Description : FORE SIGHT 1005 007737 IN FINISHED CONDITION()
Specification : FORE SIGHT TO DRG.NO. ARDE SK-3143/1, DS CAT NO. 1005-007737 IN FINISHED CONDITION. DC(I) NO. 26931-SA DT- 06.09.16
C
Estab
3) Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024
Description : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024()
Specification : Loop Sling Front finished condition to DRG No. ARDE/SK-3145/74 to DS CAT No.1005-008024
C
Estab
4) Housing Plunger to DS CAT NO 1005 007900
Description : Housing Plunger to DS CAT NO 1005 007900()
Specification : HOUSING PLUNGER TO DRG.NO. ARDE SK-2825/33 IN FINISHED CONDN DS.CAT.NO.1005-007900 DC(I) NO.26948-SA,DATED 26.09.16
C
Estab
5) HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION
Description : HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION()
6) EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE/ Alt Material TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16
Description : EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE/ Alt Material TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16()
Specification : TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16
C
Estab
7) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM
Description : BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM()
Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition
C
Estab
8) SEAR FOR SMALL ARMS
Description : SEAR FOR SMALL ARMS()
1) STAINLESS STEEL ERW PIPE AS PER DRG. NO. V548-0129-4019()
Specification : AS PER DRG. NO. V548-0129-4019
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) NUT to part no.2A46M-01-23()
Specification :NUT to part no. 2A46M-01-23
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856[90]()
Specification : CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
C
Nonestab
2) CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869[90]()
Specification : CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
C
Nonestab
2) CYLINDER GAS FOR LMG BELT FED[70]()
Specification : CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
2) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
3) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
4) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
R
Nonestab
2) MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Block Gas to ICR 1322 with OFT material[70]()
Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl
C
Nonestab
2) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
3) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
4) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
5) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING OF SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2747 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM CASING C2012 RAW MATERIAL WILL BE SUPPLIED BY OFT[70]()
Specification : AS per TE
C
Nonestab
7) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]()
Specification : As per TE
C
Nonestab
8) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()
Specification : As per TE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) AMMUNITION POUCH FOR GPMG[70]()
Specification : AMMUNITION POUCH FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6251
Specification : ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.
R
Estab
Category : ddp
Grade : 3
Size :
L
1133
A.T. Industries
8068, Bara Hind Rao, Delhi Delhi
PIN1 : 110006
Phone No. : 9810111372 GSTIN : 07AAAPF5094P1ZD
Specification : ALCOHOL METHYL(TECHNICAL)SPECIFIC GRAVITY 0.793 MAX AT 20 DEGREE C (METHANOL) CONFORMING TO B.F. SPECN.1.19 DATED 6.10.96.AMENDED ON 07.10.2006.
1) MONOBASIC COPPER B BETA RESORCYLATE
Description : MONOBASIC COPPER B BETA RESORCYLATE()
Specification : MONOBASIC COPPER B ( BETA) RESORCYLATE AS PER SPECIFICATION HEMRL/SRP/ECP/08/04 DATED 22-05-2018
R
Estab
2) Monobasic lead B Beta Resorcylate
Description : Monobasic lead B Beta Resorcylate()
Specification : Monobasic lead B Beta Resorcylate as per Specification HEMRL/SRP/2020/JAN/05 Dated 07/01/2020
R
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
[Deemed Registration]
Name
Specification
Use
Status
1) NG Barrier of 125mm FSAPDS practice LF 9911358705
Description : NG Barrier of 125mm FSAPDS practice LF 9911358705()
Specification : NG Barrier of 125mm FSAPDS practice consist of. 1. NG barrier for 125mm FSAPDS/ Practice ammn. primary cartridge to spec./ drg. no. HEMRL/CCC/125/FS/2014-1
2. NG barrier for 125mm FSAPDS/ Practice ammn. secondary cartridge to spec./ drg