List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1181 SEMCO FORGE PVT. LTD.
18/28, Site-IV, Sahibabad Sahibabad Industrial Area Sahibabad Uttar Pradesh
PIN1 : 201010
Phone No. : 22152200
GSTIN : 09AAKCS7793R1ZZ 		DELS33085D

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) BLOCK GAS FORGING FOR RIFLE 5.56MM INSAS.() AS PER DRAWING C NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) FORGING OF TA GUIDE () AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) FORGING OF TA CLAMP() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) FORGING OF TA SHOE() AS PER OFM SPECIFICATION C NOT ESTABLISHED
4) FORGING OF FILLING PLUG 1000 LBS() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size : S
1Small Arms Factory

Name Specification Use Status
1) Steel Forging for Block Gas DRG. No. SKM - 957 () As per DRG. C Not Estab
2) Lever Locking DRG. No SKM-303*5() As per DRG. C Not Estab
3) Buffer Body DRG. No SKM 304*1() As per DRG. C Not Estab
4) Bracket Back Sight M/C GUN 7.62 TK-71 DRG. No SKM 309*1() As per DRG. C Not Estab
5) Breech Block Side 7.62 Machine Gun TK-71 DRG. No SKM 281*2() As per DRG. C Not Estab
6) Receiver Guide Front Side DRG. No SKM 305*2() As per DRG. C Not Estab
7) Forging Drg. For Plate bottom M/c gun 7.62 DRG. No. SKM 283*2() As per DRG. C Not Estab
Category : DDP,DP
Grade : I,II
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) Intake Camshaft () 20-07-06 A C Estab.
2) Exhaust Camshaft () 20-07-15 A C Estab.
Category : DP
Grade : II
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) Forging for Counter shaft GB 2691 2630 0405 3() As per specification / Drawings C Not established
2) Forging for Main Shaft 2691 2620 7911 3() As per specification / Drawings C Not established
3) Forging for Drive Shaft 322 2820 301 50 (R1)() As per specification / Drawings C Not established
4) Forging for Coupling Flange AGB 312 262 2045 3 (A)() As per specification / Drawings C Not established
5) Forging for Coupling Flange RXL 2730 3530 5001 3() As per specification / Drawings C Not established
6) Forging for Steering Lever LH & RH 312 338 1005 50() As per specification / Drawings C Not established
7) Forging for Steering Arm 2154 3385 6003 3() As per specification / Drawings C Not established
8) Forging for King Pin Lower 340 332 1306 3(R2)() As per specification / Drawings C Not established
9) Forging for Flange Axle Housing 2604 3510 5102 3 (R1)() As per specification / Drawings C Not established
10) Forging for follower 322 337 0417 50() As per specification / Drawings C Not established
11) Forging for 1st Speed Gear on Main Shaft 2691 2620 5412 3 (R2)() As per specification / Drawings C Not established
12) Forging for Gear Rear 322 2820 211 50 (R1)() As per specification / Drawings C Not established
Category : DDP,DP
Grade : I,II
Size : S
1182 DIE HARD POLYMER PRODUCTS
MAINAK, 13/2, K.B. SARANI, K.B. SARANI KOLKATA West Bengal
PIN1 : 700080
Phone No. : 25294024
GSTIN : 19ACCPC0670N1ZL 		ACCPC0670N

Download 		1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) Rubber washer X4900550 Description : Rubber washer X4900550() Specification : Rubber washer X4900550 C Estab
Category : dp
Grade : 3
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) Sealing Ring () 3334-171 E Estab.
2) Ring TRL() 303-11-2 E Not Estab
3) Gasket() 3327-61-3 E Not Estab
4) Ring TRL() 303-11-2 E Established
Category : P
Grade : II
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) Rubber Items for MPV[90]() Specification : RUBBER ITEMS FOR MPV AS PER DRG. NO. MPV/HULL/093/A CONSISTING OF 1. MUD RUBBER - 4 NO/SET, 2. TROOPER COMPARTMENT - 1 NO/SET, 3. FUEL TANK UPPER - 1 NO/SET, 4. FUEL TANK LOWER - 1 NO/SET, 5. CO-DRIVER SIDE - 1 NO/SET, 6. DRIVER SIDE & A. C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) R S Buffer[90]() Specification : As per specification / drg. C Estab
2) Rubber Bush[90]() Specification : As per specification / drg. C Estab
3) Rubber Packing for Bracket[90]() Specification : As per specification / drg. C Estab
4) Rubber Packing for Strap[90]() Specification : As per specification / drg. C Estab
5) Rubber Pad[90]() Specification : As per specification / drg. C Estab
Category : p
Grade : Grade III
Size : S
1183 VAKO SEALS PVT LTD
3/4 KRDN TRUST ESTATE OFF AAREY ROAD GOREGAON EAST MUMBAI Maharashtra
PIN1 : 400063
Phone No. : 40371234
GSTIN : 27AACCV0100D1Z4 		AACCV0100D

Download 		1Gun Carriage Factory

[Deemed Registration]
Name Specification Use Status
1) 9080079689 PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038 Description : 9080079689 PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038() Specification : PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038 P Estab
2) 9080079690 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037 Description : 9080079690 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037 P Estab
3) 9080079691 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039 Description : 9080079691 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039 P Estab
4) 9080079692 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040 Description : 9080079692 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040() Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040 P Estab
5) 9080079695 PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4 Description : 9080079695 PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4() Specification : PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4 P Estab
Category : p
Grade : 3
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) CORRUGATED OIL SEAL () 411- 73-2 A E Estab.
2) SUB ASSY OIL SEAL () SB 92-1106-190 E Estab.
3) ASSY SEAL () SB 411-96-5 E Estab.
4) ASSY GLAND () SB 20-12-15-2 E Estab.
5) SEAL () SB 896-100 E Estab.
6) SEALING RING () 20-01-51-1 E Estab.
7) SEALING RING () 20-63-21 E Estab.
8) SEALING RING () 20-63-22-1 E Estab.
9) SEALING RING () 3334-171 E Estab.
10) SEALING RING () SB 20-34-222-3 E Estab.
11) SEALING RING ASSEMBLY. () SB 315-668 E Estab.
12) CUP ASSY () SB 20-12-07-2 E Estab.
13) CUP () SB 20-12-07-02 E Estab.
14) CUP () SB 20-27-18 E Estab.
15) CUP () SB 20-63-04-01 E Estab.
16) RING () A1-1289 E Estab.
17) RING () 20-01-10-1 E Estab.
18) RING () 303-10-4 E Estab.
19) RING () 303-38-11 E Estab.
20) RING () 303-11-2 E Estab.
21) RING () 355-48-091 E Estab.
22) RING () 355-48-044 E Estab.
23) RING () 355-48-041-01 E Estab.
24) RING () 355-48-006-01 E Estab.
25) RING () 355-48-017-01 E Estab.
26) RING () 355-48-022-01 E Estab.
27) RING () 355-48-024-01 E Estab.
28) RING () 358-48-045-01 E Estab.
29) RING () 358-48-047-01 E Estab.
30) RING () 358-048-054 E Estab.
31) RING () 358-48-047-01 E Estab.
32) RING () 358-48-045-01 E Estab.
33) RING () 506-100 E Estab.
Category : DP
Grade : II
Size : M
1Gun Carriage Factory

Name Specification Use Status
1) OIL SEALS (5MM TO 1500MM)() As Per GCF Requirements & Specifications C Established
2) "O" RINGS (OUTER DIA 1MM TO 2500MM)() As Per GCF Requirements & Specifications C Established
Category : DP
Grade : II
Size : S
1Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) Seal and Spring TO 6206406583 Description : Seal and Spring TO 6206406583() Specification : CQA(HV)5.45.001 / VAKO C Estab
2) CUP ASSY TO 6201062002 Description : CUP ASSY TO 6201062002() Specification : 172.62.013CB-1CB C Estab
3) CUP TO 6201062005 Description : CUP TO 6201062005() Specification : 172.62.012CB-1ACB C Estab
4) CUP TO 6206407012 Description : CUP TO 6206407012() Specification : 172.46.018CB C Estab
5) CUP TO 6206407013 Description : CUP TO 6206407013() Specification : 172.46.018CBACB C Estab
Category : p
Grade : 2
Size : S
1184 Perfect Gears (Chennai) Pvt.Ltd
2, Vembuli Amman Koil, 1st Cross Street, Udhayam Colony, K.K.Nagar(West), CHENNAI TAMIL NADU
PIN1 : 600078
Phone No. : 044 23640404
GSTIN : 33AAACP5831B1ZZ 		AAACP5831B

Download 		1Engine Factory Avadi

Name Specification Use Status
1) Water pump drive Torsion bar() 402-37-7 E Estab.
2) TA in machining of Gear() 20-08-247 C Estab.
3) TA in machining of Gear() 20-08-205-4 C Estab.
4) Intake Camshaft Gear() 307-07-2 E Estab.
5) Incline Shaft Gear () 308-67-2 E Estab.
6) Generator Drive Gear() 20-08-260 E Estab.
7) Gear Shaft() 308-68-2 E Estab.
8) Gear() 402-34-9 E Estab.
9) Gear() 20-12-85 E Estab.
10) Gear() 20-12-54-2 E Estab.
11) Gear() 20-12-53-1 E Estab.
12) Gear() 20-08-203-3 E Estab.
13) Exhaust Camshaft Gear() 307-16-2 E Estab.
14) Drive Gear() 402-98 E Estab.
15) Camshaft Bush() 307-08-3 E Estab.
Category : DP
Grade : II
Size : S
1Heavy Vehicle Factory

[ENR Registration]
Name Specification Use Status
1) THRUST DISK TO 6101040060 Description : THRUST DISK TO 6101040060() Specification : 172.40.327/PL C Estab
2) GEAR WHEEL TO 6106408071 Description : GEAR WHEEL TO 6106408071() Specification : 172.47.142-1/PL C Estab
3) GEAR TO 6206004139 Description : GEAR TO 6206004139() Specification : 172.26.019 C Estab
Category : p
Grade : 2
Size : S
1185 ALERIS ALUMINUM DUFFEL BVBA
A STOCLETAAN 87 DUFFEL BELGIUM
PIN1 : 3215
Phone No. : 003215302237 		0403045292

Download 		1Heavy Alloys Penetrator Project

[Deemed Registration]
Name Specification Use Status
1) ALUMINIUM ALLOY EXTRUDED BARS 130MM DIA[7075-T6510 (ASTM B-221M)]() 7075-T6510 (ASTM B-221M) R Estab.
2) ALUMINIUM ALLOY EXTRUDED BARS 135MM DIA [7075-T6510 (ASTM B 221M)]() 7075-T6510 (ASTM B 221M) R Estab.
3) ALUMINIUM ALLOY EXTRUDED BARS 75MM DIA [7075-T6511 (DTD 5124) ]() 7075-T6511 (DTD 5124) R Estab.
Category : DDP
Grade : I
Size : L
1186 SWASTIK ACID & CHEMICALS NAGPUR
Chandrashekhar Azad Square, Central Avenue NAGPUR MAHARASHTRA
PIN1 : 440032
Phone No. : 0712-2764908
GSTIN : 27AAGFS0979Q1ZB 		NGPS02180D

Download 		1Ordnance Factory Bhandara

Name Specification Use Status
1) LITHARGE() Specn-JSS-6810-111:2007 REV-1 R ESTB.
2) Di Basic Lead Stearate() Specn-JSS-6810-145:2006 DC 4005 ME Dtd-8.1.2010 R ESTB.
Category : S
Grade : II
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) Litharge[10]() Specification : As per TMI-516( Bofors Specn.) R Estab
2) Di Basic Lead Stearate[10]() Specification : Specn-JSS-6810-145:2006 DC 4005 ME Dtd-8.1.2010 R Estab
3) Paraffin oil for Biazzi process (Paraffin liquid grade - I)[10]() Specification : JSS 9160 - 05 - 2001 (Revision No. 1) R Estab
4) Aluminium Stearate[10]() Specification : ALUMINIUM STEARATE TO SPCN:IND/ME-970 :2016. DC-5462-ME-01.6. 2016. (a) Retention on 150 micrometer IS sieve max.5.0%. (b) Retention on 75 micrometer IS sieve max.15%.. R Estab
5) Zinc Stearate[10]() Specification : ZINC STEARATE AS PER SPECIFICATION NO. JSS-6810-133-2016 (REV. NO. 2). R Estab
6) ETHYLENE GLYCOL[10]() Specification : ETHYLENE GLYCOL MONOETHYLETHER (CELLOSOLVE SOLVENT) SPECN. NO. IND/ME/422 (a) 3754-ME-DT.12.12.2002. R Estab
7) Tri Chloro Ethylene[10]() Specification : ETHYLENE TECHNICAL TYPE-2 CONFORMING TO THE SPECIFICATION NO,IS/245/1988 (THIRD REVISION) REAFFIRMED 2001. R Estab
Category : S
Grade : II
Size :
1Ordnance Factory Chanda

Name Specification Use Status
1) 1003134011 DESMODURE RC A SOLUTION OF POLYISOCYANURATE OF TOLUNEDIISOCYNATE IN APPROX 35 PERCENT ETHYL ACETATE[10]() Specification : DESMODURE RC A SOLUTION OF POLYISOCYANURATE OF TOLUNEDIISOCYNATE IN APPROX 35 PERCENT ETHYL ACETATE R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) CALCIUM CARBONATE CHALK CALCIT Description : CALCIUM CARBONATE CHALK CALCIT() Specification : CALCIUM CARBONATE CHALK CALCITE.TO SPECN.: PACAL-'F'VARIETY.PARAMETERS OF PACAL SPECN.TO BE TESTED AS PER SPECIFIED METHOD. R Estab
2) Camphor Description : Camphor() Specification : IND/ ME/ 458 DC - 3754 ME Dtd. 12/12/ 2002 R Estab
3) CAUSTIC SODA TECHNICAL FLAKES Description : CAUSTIC SODA TECHNICAL FLAKES() Specification : CAUSTIC SODA TECHNICAL FLAKES TO SPECIFICATION IS:252-1991. (THIRD REVISION), Reaffirmed 2003 Amds 1. R Estab
4) Formaldehyde SOLUTION Description : Formaldehyde SOLUTION() Specification : FORMALDEHYDE SOLUTION 37-41 % W/V, A.R.GRADE IN 2500 ML PACKING SPECIFICATION NO.- IS :3321-1973.(FIRST REV) REAFFIRMED 2005,AMDS 2. R Estab
5) Benzene Solvent Description : Benzene Solvent() Specification : BENZENE SOLVENT SPECN.- IS-534:2007 (FOURTH REVISION). R Estab
6) Soda Ash ( Light ) Technical Description : Soda Ash ( Light ) Technical() Specification : SODA ASH (LIGHT) TECHNICAL TO SPECIFICATION IS-251/1998 FOURTH REVISION.DC-3804-ME DTD.3.2.2004.(REAFFIRMED 2005) R Estab
7) Glycerine for Nitration Description : Glycerine for Nitration() Specification : GLYCERINE FOR NITRATION TO SPECN.NO. JSS-6810-109:2013 REVISION NO 3, DC 5219-ME DTD.12.04.14. ALONGWITH SULPHURIC ACID COLOURATION TEST. THE GLYCERINE MUST PASS THROUGH THE SULPHURIC ACID COLOURATION TEST. R Nonestab
Category : s
Grade : 2
Size : S
1Ordnance Factory Bhandara

[ENR Registration]
Name Specification Use Status
1) DI ETHYL PHTHALATE Description : DI ETHYL PHTHALATE() Specification : DIETHYL PHTHALATE CONFORMING TO SPECN IND/ME/873(A)(PROV)- DC NO.3754-ME DATED 12.12.2002 R Estab
Category : s
Grade : 2
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION item code 1001015748[10]() Specification : BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE R Nonestab
Category :
Grade : Grade III
Size : S
1187 Madnani Engineerings Works
10-B, Co-operative Industrial Estate, Udyog Nagar Kanpur Uttar Pradesh
PIN1 : 208022
Phone No. : 2240897
GSTIN : 09AABFM3824F1ZH 		AABFM3824F

Download 		1Ordnance Equipment Factory

Name Specification Use Status
1) IMPROVED SPACE HEATING DEVICE BUKHARI FOR COLD CONDITIONS[21]() Specification : DIPAS/Specifications/Improved SHD (BUKHARI)/3/2017 E Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) CONTAINER FOR BSO[62]() Specification : CONTAINER TO DRG NO.OFDR/CT/1/M1/A3AMDT DC 103 DT 5-3-99 AND LID FOR CONTAINER TO DRG.NO.OFDR/CT/5/M1/A3 TO SPECN. NO. DGOF/OFDR/008. R Nonestab
Category :
Grade : Grade III
Size : M
1188 AAN ENGINEERING INDUSTRIES LIMITED
38 K.M STONE DELHI JAIPUR HIGHWAY KHANDSA VILLAGE GURUGRAM Haryana
PIN1 : 122001
Phone No. : 2824801
GSTIN : 06AAECR6020J1ZI 		RTKR05880A

Download 		1Ordnance Factory Muradnagar

Name Specification Use Status
1) CASTING & MACHINING OF ALUMINIUM, FERROUS & STEEL (MANGANGSE) FOR T-72 COMPONENTS() AS PER OFM SPECIFICATION C NOT ESTABLISHED
2) MACHINING OF SIZE UPTO 500MM X 500MM (ALUMINIUM, FEEEOUS, STEEL ALLOYS)() AS PER OFM SPECIFICATION C NOT ESTABLISHED
3) ALLOY STEEL CASTING OF WEIGHT UPTO 50KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size : M
1Ammunition Factory Khadki

Name Specification Use Status
1) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) SHELL 105 MM IFG ILLG.2A (EMPTY ASSY)[62]() Specification : DRG.NO.ARDE 9769 SHT NO 3 PT NO ISX 68 GE,DC-36686A DT.10-07-2000 AND SPECN. NO.CQA (A) 4928 DC 36684-A C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) FUZE T&P DA NO. 213P MK-5( M4) EMPTY FOR MORTAR BOMB 120MM ILLG.[63]() Specification : L 9974-F(L) [DRG. NO. 2907A-10004] C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) FUZE T&P DA NO. 213P MK-5( M3) EMPTY FOR MORTAR BOMB 81 MM ILLG.2A[62]() Specification : L 9974-F(L) [DRG. NO. ARDE1987 RT ,part no. IQX 67] C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BODY EMPTY FOR 51 MM SMOKE [62]() Specification : DRG.NO.CQA(A)/AMN/2935,DET 1 PT.NO.ITV273 SPEN.NO.CQA(A) 2352 (d) C Nonestab
2) BODY FOR 51 MM ILLUMINATING[62]() Specification : DRG.NO.ARDE - 2064 (DET-1) PT.NO.ITV 220 SPECN.CQA(A) 2328 (d) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) Body Cast Iron Empty for FTW[64]() Specification : CIA 3807(d) Drg. No. DD(L) 13461/A/1 C Nonestab
2) BOMB BODY (EMPTY)FOR 120MM ILLG.[63]() Specification : SPECN. NO. CQA (A) 2321 (b) DC-36952-A dt.16.03.2004 DRG NO. ARDE 2011 PT. NO. ITV - 12 SA DC (I) 33903 - A C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
2) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN NO CQA(A) 0922[63]() Specification : CQA(A) 0922 C Nonestab
2) FUZE PERCN DA NO.117 MK 20 EMPTY/COMPLETE/WITH CAP DESGN REF L5/10744/GE/341 PART NO. QX 244 GE AND ITEM LIST FOR QX 244 GE DESGN REF NO.(I.A.6900) L5 / 10744 / GE / 341, SPECN NO. I.A. 1204[63]() Specification : I.A. 1204 C Nonestab
3) FUZE PERCN.D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DESIGN.REF.NO. CIA/AMN/273 PT.NO. IQX 35 GE SPECN. NO. CQA(A) 0917[6331800110]() Specification : CQA(A) 0917 C Nonestab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY (9911356459)[99]() Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB. E Nonestab
Category : ddp
Grade : Grade II
Size : L
1Machine Tool Proto Type Factory

Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...[99]() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... R Nonestab
Category : ddp
Grade : Grade II
Size : S
1Machine Tool Proto Type Factory

Name Specification Use Status
1) SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00...[99]() Specification : SAFE&ARM DEVICE(SAD)FOR ARTY FUZE.SAFE AND ARM DEVICE FOR FUZE PD155 DRG.NO.770-13-21-00... R Nonestab
2) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]() Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00. C Nonestab
Category : ddp
Grade : Grade II
Size : S
1189 KGK Industries
Shed No 80-A, SIDCO Industrial Estate, Coimbatore. TAMIL NADU
PIN1 : 641021
Phone No. : 0422 4242800
GSTIN : 33AACFK3998F1Z8 		CMBK03985C

Download 		1Engine Factory Avadi

Name Specification Use Status
1) GEAR CLUSTER () 402-39-4 C Estab.
2) DRIVE SHAFT (FORGING) () 3308-40-2 C Estab.
3) TORSION BAR (FORGING) () 402-37-7 C Estab.
4) CRANK SHAFT SHANK (ACCESSORY END) () 3305-07-1 C Estab.
5) GEAR (FORGING) () 307-16-2 C Estab.
6) COVER () 20-39-77-2 E Estab.
7) GEAR (FORGING) () 3312- 99 C Estab.
8) VALVE TIMING GEAR AXLE () 20-061-36-7 E Estab.
9) AXLE (FORGING). () 20-08-236-2 C Estab.
10) OIL PUMP GEAR () 3312-100-2 & 101-5 E Estab.
11) GEAR (FORGING) () 3312-98-2, 3312-99-2 C Estab.
12) OIL PUMP DRIVE GEAR FORGING() 3312-101-4 C Estab.
13) GEAR (FORGING) () 307-16-2 C Estab.
14) GEAR () 402-34-7 E Estab.
15) WATER PUMP DRIVE GEAR () 402-35-5 E Estab.
16) GEAR (FORGING) () 307-07-2 C Estab.
17) ACR CAP () 20-04-22-4 E Estab.
18) RING HOLDER() 20-05-59-3 E Estab.
Category : P
Grade : II
Size : S
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) FUEL CHANGE OVER UNIT Description : FUEL CHANGE OVER UNIT() Specification : FUEL CHANGE OVER UNIT Drg./Pt. no. B5092108(V2) C Estab
Category : p
Grade : 3
Size : S
1Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) Oil Pump Drive Description : Oil Pump Drive() Specification : 20-08-245 C Estab
2) GEAR Description : GEAR() Specification : 20-05-126-4 C Estab
3) CLUSTER GEAR Description : CLUSTER GEAR() Specification : 20-08-200-3 C Estab
4) ACR Cap Description : ACR Cap() Specification : 20-04-22-4 C Estab
5) Exhaust Manifold Description : Exhaust Manifold() Specification : SB 418-00-6 C Estab
Category : ddp
Grade : 1
Size : S
1Engine Factory Avadi

[ENR Registration]
Name Specification Use Status
1) GEAR Description : GEAR() Specification : 20-12-26-1 C Estab
2) ACR Cap Description : ACR Cap() Specification : 20-04-22-4 C Estab
3) Exhaust Manifold Description : Exhaust Manifold() Specification : SB20-18-00-4 C Estab
4) COVER Description : COVER() Specification : 20-39-77-2 C Estab
5) AXLE Description : AXLE() Specification : 20-08-236-2 C Estab
Category : ddp
Grade : 1
Size : S
1190 Sack International Pvt Ltd
Plot no. 638, Indl Area, Phase IX, Mohali Punjab
PIN1 : 160062
Phone No. : 5094779
GSTIN : 03AAHCS8918B1ZI 		AAHCS8918B

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) ROTATING SEARCH LIGHT AS PER ENCLOSURE[90]() Specification : ROTATING SEARCH LIGHT AS PER ENCLOSURE C Nonestab
Category :
Grade : Grade III
Size : S
1191 HI-TEC CONSULTANTS
PLOT NO. 26, BALAJI GARDENS, R.R.V PURAM (POST), RRV. PURAM VISAKHAPATNAM Andhra Pradesh
PIN1 : 530029
Phone No. : 9705861454
GSTIN : 37ACKPR1598N1ZN 		ACKPR1598N

Download 		1Gun and Shell Factory

[ENR Registration]
Name Specification Use Status
1) FIRING PIN ASSY TO DRG NO 9 A 621 05 020 SB Description : FIRING PIN ASSY TO DRG NO 9 A 621 05 020 SB() Specification : FIRING PIN ASSY. TO DRG. NO. 9-A-621-05-020 SB C Estab
2) BUSH TO DRG NO 9 A 621 05 015 Description : BUSH TO DRG NO 9 A 621 05 015() Specification : BUSH TO DRG NO 9-A-621.05.015 C Estab
3) LEAD CONTACT ASSY Description : LEAD CONTACT ASSY() Specification : LEAD CONTACT ASSY. TO DRG. NO. 9-A-621-05-030 SB IN F/C FOR AK-630M C Estab
Category : ddp
Grade : 3
Size : S
1192 Potential Power Techniques (P) Ltd
No.96, SIDCO Industrial Estate, Kakkalur, Thiruvallur. TAMIL NADU
PIN1 : 602003
Phone No. : 044 27666626
GSTIN : 33AACCP2632A1Z6 		AACCP2632A

Download 		1Engine Factory Avadi

Name Specification Use Status
1) Starter C5-2C() SB 20-09-02-2 E Estab.
2) Panel() 160-525H E Estab.
Category : P
Grade : II
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) STARTER C5-2C[02]() Specification : TO DRG. NO. SB 20-09-02-2 C Estab
2) Panel[02]() Specification : 160-525H C Estab
3) GENERATOR VG7500N with Fan Assy() Specification :SB 20-09-01-6 & 20-09-07 C Nonestab
Category : P
Grade : II
Size :
1193 Pioneer Industrial Enterprises
Industrial Area, Shed no.-1, Aurobindo Setu, Ultadanga, Kolkata W.B
PIN1 : 700067
Phone No. : 033-23563432 		CALP16789G

Download 		1Vehicle Factory Jabalpur

[Deemed Registration]
Name Specification Use Status
1) Metalistic Bush Pt. No.- X0500250[As per specification / Drawings]() As per specification / Drawings C Non Established
2) Moulded & Bonded Rubber items viz. S/A Bump stop, Metacone mtg. Buffer for door assy. etc.[As per specification/ Drg.]() As per specification/ Drg. c Estab.
3) Packing .- 643-01-7317-1 & 645-01-7317-1[As per specification / Drawings]() As per specification / Drawings C Established
4) Rubber for MPV/Hull/ -093A[As per specification / Drawings]() As per specification / Drawings C Non Established
5) Rubber Packing for Bracket Part No. -X-1200650[As per specification / Drawings]() As per specification / Drawings C Non Established
6) Rubber Packing for strap Part No. X-1200550[As per specification / Drawings]() As per specification / Drawings C Non Established
7) Seal Bellow Part NO. X-7400150[As per specification / Drawings]() As per specification / Drawings C Non Established
Category : P
Grade : I
Size : S
1194 GRAPHIC ENTERPRISES
SHIVNERI INDUSTRIAL PREMISES, PLOT NO-94/1, SECTOR NO.10 MIDC BHOSARI PUNE Maharashtra
PIN1 : 411026
Phone No. : 9881008529
GSTIN : 27ACDPN7256N1Z0 		ACDPN7256N

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) U BOLT FRONT[90]() Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3 C Nonestab
2) LEVER CONTROL HAND/TORSION BAR[90]() Specification : LEVER CONTROL HAND C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) SLEEVE[90]() Specification : SLEEVE C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) U BOLT FRONT[90]() Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3 C Nonestab
2) SLEEVE[90]() Specification : SLEEVE C Nonestab
3) BOLT DRAIN BUSH[90]() Specification : BOLT (DRAIN BUSH) DRG NO. OFPM 709-12-302-A C Nonestab
4) BUSH[90]() Specification : BUSH DRG. NO. 673-50-144/A C Nonestab
5) BOTTOM BRACKET LEAF SPRING 620 02 1220 1 C[90]() Specification : BOTTOM BRACKET (LEAF SPRING MOUNTING) DRG. NO. 620-02-1220-1/C C Nonestab
6) BRACKET 675 57 310[90]() Specification : BRACKET DRG. NO. 675-57-310 C Nonestab
7) BUSH DRG NO 610 11 1031 1 A[90]() Specification : BUSH DRG.NO. 610-11-1031-1/A C Nonestab
8) HEX BOLT M10X20 IS 1364[90]() Specification : HEX BOLT M10X20 IS:1364 GRADE 8.8 GALVANISED & YELLOW PASSIVATED MAKE-TVS , LPS , UNBRAKO C Nonestab
9) BOLT M20X45 MODIFICATION DRG NO OFPM 640 01 6081 1 A[90]() Specification : BOLT M20X45 (MODIFICATION) DRG.NO.OFPM 640-01-6081-1/A C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) NIC CROME PLATED RING SPA24X27[90]() Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2. C Nonestab
2) STUD[90]() Specification : STUD M 14X 1.5, PART NO. X3711915 A C Nonestab
3) WASHER PART NO F4930140[90]() Specification : WASHER WASHER DRG./PART NO.F-4930140-D REF. DRG. No.F4931140-D C Nonestab
4) Washer PART NO F4930240[90]() Specification : WASHER 22 MM. WASHER 22 MM. DRG./PART NO.F-4930240 REF DRG F 4931140 D C Nonestab
Category :
Grade : Grade III
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) NIC CROME PLATED RING SPA24X27[90]() Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2. C Nonestab
2) STUD[90]() Specification : STUD M 14X 1.5, PART NO. X3711915 A C Nonestab
Category :
Grade : Grade III
Size : S
1195 OMEX International
290, Bipin Behari Ganguly Street, 2nd Floor, Kolkata West Bengal
PIN1 : 700012
Phone No. : 033 22360293
GSTIN : 19ADUPB7871R1ZD 		ADUPB7871R

Download 		1Engine Factory Avadi

Name Specification Use Status
1) All types of Spanners() As per Specifications E Estab.
2) All types of Pliers() As per Specifications E Not Estab
3) Bench Vices() As per Specifications E Not Estab
4) Hammers() As per Specifications E Not Estab
5) Bearing Pullers() As per Specifications E Not Estab
6) Socket / Drill Sockets / Drill bits() As per Specifications E Not Estab
Category : P
Grade : II
Size : S
1196 EMC Limited
Constantia Office Complex, 11, Dr.U.N.Brahmachari Street, 8th Floor (South Block), Kolkata West Bengal
PIN1 : 700017
Phone No. : 033 22893122
GSTIN : 19AAACE7582J1Z7 		CALE00012F

Download 		1Engine Factory Avadi

Name Specification Use Status
1) Camshaft Thrust Bearing Cap() 20-06-38 E Estab.
2) Cover() 20-01-84-3 E Estab.
3) Cover() 20-08-232-4 E Estab.
4) Top Plate() 402-95-1 C Estab.
5) Bottom plate body() 402-96-1 C Estab.
6) Half Loop() 20-01-136 C Estab.
7) Cap() 20-01-84-3 C Estab.
8) Aluminium Alloy Extruded Rods() As per Drawing and Specifications R Not Estab
Category : DP
Grade : II
Size : M
1Ordnance Factory Khamaria

Name Specification Use Status
1) ALU ALLOY ROD 26.50MM IS733 24345WP (0611505027)[06]() Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS- R Estab
2) ALU ALLOY ROD 31.75MM IS733 64430 W (0611503032)[06]() Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 W CONDITION R Estab
3) ALU ALLOY ROD 65MM IS733 GR24345 WP (0611503065)[06]() Specification : ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP". R Estab
4) ALU ALLOY ROD 28.50MM BS1474 2014A (0619500029)[06]() Specification : ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION. R Estab
Category : P
Grade : III
Size :
1Ordnance Factory Kanpur

Name Specification Use Status
1) ALUMINIUM ADAPTOR FORGING() AS PER DRG. NO- SK-7545/B C Not Estab.
Category : DDP
Grade : III
Size : L
1Rifle Factory Ishapur

Name Specification Use Status
1) ALLUMINIUM ROD 90MM X 155MM LONG FOR MUZZLE ATTACHMENT BARREL OF 12 BORE PUMP ACTION GUN.[70]() Specification : MATERIAL:-DTD 5124/AA7075 R Nonestab
2) ALLUMINIUM ROD 40MM X 145MM LONG FOR BARREL SLEEVE MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.[70]() Specification : MATERIAL:-DTD 5124/AA7075 R Nonestab
Category : p
Grade : Grade II
Size : L
1Gun and Shell Factory

Name Specification Use Status
1) 84mm TPT PROJECTILE BODY TO GSF DRG. NO M-11229 IN FINISH MACHINED CONDITION[61]() Specification : AS PER DRG. C Nonestab
Category : p
Grade : Grade II
Size : L
1Ordnance Factory Dumdum

Name Specification Use Status
1) FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION[62]() Specification : FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION R Estab
Category : ddp
Grade : Grade II
Size : L
1197 Ravindra Trading Company
22, Muthial Reddy Street, Alandur, CHENNAI TAMIL NADU
PIN1 : 600016
Phone No. : 044 65632780
GSTIN : 33ALGPS5068R1ZA 		ALGPS5068R

Download 		1Engine Factory Avadi

Name Specification Use Status
1) Ring Holder() 20-05-59-3 E Estab.
2) Thrust Flange() 20-05-104-2 E Estab.
Category : P
Grade : II
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) PIN() DRG.NO.613.44.058 C NOT ESTABLISHED
Category : P
Grade : II
Size : S
1198 Vijai Fasteners & Precision Works
911, Awasthi Bhawan, Canal Road, Rae Bareli Uttar Pradesh
PIN1 : 229001
Phone No. : 9415117384
GSTIN : 09AADFV2045F1ZB 		AADFV2045F

Download 		1Ordnance Equipment Factory

Name Specification Use Status
1) TRADE ASSISTANCE FOR HOT DIP GALVANIZATION OF TENT COMPONENTS() AS PER REQUIREMENT & SPECIFICATION R
2) EPOXY POWDER COATING BLACK OF ALUMINIUM FRAME FOR SYNTHETIC WEB EQUIPMENT PACK ICK () AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : III
Size : S
1199 Sadha Engineering Works
No.11, Nagavalli Amman Koil Street, Nandavanamettur, Kamaraj Nagar, Avadi, CHENNAI TAMIL NADU
PIN1 : 600071
Phone No. : 044 26550796
GSTIN : 33ALHPS0192F1Z7 		CHES28432F

Download 		1Engine Factory Avadi

Name Specification Use Status
1) Access hole cover() 306-60-1 R Established
2) Air Starting Pipeline() SB 322-15-4 CB R Established
3) Adjusting Ring() 20-39-73 R Established
4) Axle() 20-01-99-2 R Established
5) Axle Housing() 3338-439-A R Established
6) Bush() 345-92 R Established
7) Bush() 3334-36-3 R Established
8) Bush() 411-19-3 R Established
9) Bushing() 20-01-138-1 R Established
10) Bushing() 20-13-71-2 R Established
11) Bushing() 20-08-244 R Established
12) Bushing() 360-26-014-02 R Established
13) Bolt() 522-125 R Established
14) Bolt() 356-84-1 R Established
15) Bolt() 584-25 R Established
16) Bolt M6x45() 356-115-3 R Established
17) Bolt M6x20() 356-84 R Established
18) Bolt M10x50() 556-09 R Established
19) Band() XL-475 R Established
20) Band() XL-225 R Established
21) Band() XP 250 P R Established
22) Block() 20-39-93 R Established
23) Balancing Shaft nut() 20-05-129 R Established
24) Cotter Pin () 354-19 R Established
25) Cotter Pin 4x36() 354-18 R Established
26) Clip of 2 pipes() 322-65 R Established
27) Clip of 3 pipes() 322-66 R Established
28) Clip of 6 pipes() 322-69 R Established
29) Cover() 20-40-02 R Established
30) Cover() 20-01-120-7 R Established
31) Cover() SB 3342-107-2 R Established
32) Cover plug() 3338-441 R Established
33) Clamp() 3335-67-1 R Established
34) Clamp() 3355-77-3 R Established
35) Clamp() 3320-270 R Established
36) Cleat() 335-15-1 R Established
37) Cap() 340-55 R Established
38) Cap of block spring() 3338-554 R Established
39) Coupling Stud() SB 301-13-1A R Established
40) Drive Bush() 3334-363 R Established
41) Drive Coupling() SB 3334-10-8 R Established
42) Elbow() 306-98-15-01 R Established
43) Fuel discharge pipe LH() SB 3334-175-5 R Established
44) Fuel discharge pipe RH() SB 3334-176-5 R Established
45) Fork for Valve Disc() 20-00-13 R Established
46) Gasket() 20-05-165 R Established
47) Gasket() 329-30-2 R Established
48) Governor Disc() 20-15-610-1 R Established
49) Hook() 467-005H R Established
50) Heating pipe Lower RH() SB 421-26 D R Established
51) Idle Gear Axle() 3348-440 R Established
52) Injector attatching nut() 20-06-71 R Established
53) Injector fastening nut() 306-71-1 R Established
54) Key 2.78mm() 312-30-51 R Established
55) Locking Ring() 411-97 R Established
56) Locking Ring() 20-01-134 R Established
57) Locking Ring() 20-01-135 R Established
58) Locking Ring() 20-05-160 to 160-05 R Established
59) Locking Ring() 326-51 R Established
60) Locking Plate() 3327-103 R Established
61) Locking Plate() 3327-104 R Established
62) Locking Wire () 354-22 R Established
63) Locking Wire Dia 1mm() GOST 792-67 R Established
64) Locking wood screw() 355-08-145 R Established
65) Lock Spring() 92-1106-232 R Established
66) Locking washer() 20-09-64 R Established
67) Locking Bush() 304-28-1 R Established
68) Lever support() 308-32-2 R Established
69) Lever pin() 308-33-2 R Established
70) Mesh() 3342-216 R Established
71) Nut() 474-106 R Established
72) Nut M8() 351-02B R Established
73) Nut M10() 3305-43 R Established
74) Nut M12-7H() X2-9891 R Established
75) Nozzle() 301-160-3 R Established
76) Oil by-pass () 20-63-24 R Established
77) Oil by-pass tube() 303-18-2 R Established
78) Oil pipe to Camshaft LH() SB 320-33-A R Established
79) Oil pipe to Camshaft RH() SB 320-32-A R Established
80) Oil Packing Ring() 3338-472 R Established
81) Oil Trap() 402-15-1 R Established
82) Plug() 20-13-115 R Established
83) Plug() 20-01-156 A R Established
84) Plug() 327-90-1 R Established
85) Pipe () SB 3342-295-2 R Established
86) Pipe () SB 3321-153-1 R Established
87) Pipe () 3342-279 R Established
88) Pipe () 20-05-62 R Established
89) Pipe () 20-13-117 R Established
90) Pipe () SB 20-20-05-4 R Established
91) Pipe Assy() SB 401-10 R Established
92) Pipe feeding Oil to Pump() SB 420-183-5 R Established
93) Pipe of 1st main Journal() 3305-59 R Established
94) Pipe Union() 412-53 R Established
95) Pipe Union() 20-01-104-8 R Established
96) Plate() 3308-90 R Established
97) Plate() 20-15-685 R Established
98) Packing Ring() 3305-26-4 R Established
99) Packing Ring() 317-22-1 R Established
100) Pin() 315-42 R Established
101) Plate clamping() 3342-224 R Established
102) Ring Stop() 20-01-85 R Established
103) Ring() 20-63-27-2 R Established
104) Ring() 20-05-152-2 R Established
105) Ring() 20-27-302 R Established
106) Ring() 326-47 R Established
107) Ring() 402-459 R Established
108) Retainer() 301-25-3 R Established
109) Retaining Ring() 407-474 R Established
110) Regulator Plate() 315-610-2A R Established
111) Screw () 356-22-1 R Established
112) Screw () 42-534 H R Established
113) Screw () 337-115 R Established
114) Screw () 356-58 R Established
115) Screw M5x12() 356-22-2 R Established
116) Sealing Ring () 337-129 R Established
117) Sealing Ring () 20-69-71 R Established
118) Setting Ring() 308-72-2 R Established
119) Socket Wrench() 330-148-3 R Established
120) Socket Wrench() 330-1019A R Established
121) Socket Wrench() 20-30-122 R Established
122) Shim() 327-89-2 R Established
123) Spring washer() 353-28 R Established
124) Starting Air Pipeline LH() SB 322-14-4 R Established
125) Starting Air Pipeline RH() SB 332-15-4 R Established
126) Spanner Assy() SB 330-1017 R Established
127) Spl Spanner() 300-173 R Established
128) Spanner for Ex.manifold() 320-69-1 R Established
129) Suction pipe() SB 402-02-1 R Established
130) Spacer() 20-01-59-1 R Established
131) Shield() 420-55-A R Established
132) Stud M8x30() 550-111 R Established
133) Swivel Elbow() 20-29-18 R Established
134) Servo Piston Ring() 20-34-110 R Established
135) Supporting ring() 3305-18 R Established
136) Tommy Bar() 330-723 R Established
137) Tappet() 20-27-51 R Established
138) Tapper Pin() 304-30 R Established
139) Tie rod () BM 200109 R Established
140) Tie rod () 334-77-1 R Established
141) Tie rod shaft() 334-24 R Established
142) Tight fitting Bolt() 356-79 R Established
143) Torque Wrench for Injector() SB 330-483-1 R Established
144) Tube for Oil discharge to cleaner() SB 3320-85 R Established
145) Tommy Bar Dia 10() 330-125-1 R Established
146) Union Nut() 345-21 R Established
147) Union pipe Elbow() 306-103-1 R Established
148) Valve Body() 312-08 R Established
149) Governor Lever Axle() 315-618 A R Established
150) Washer() 310-18-1 R Established
151) Washer() 20-15-659 R Established
152) Washer() 20-11-85 R Established
153) Washer() 315-639 R Established
154) Washer() 411-48-2 R Established
155) Washer() X3-9509 R Established
156) Washer() 317-60 R Established
157) Washer() 340 2S-1.5-8-16KD R Established
158) Washer() 5M-1184 R Established
159) Washer() 553-02-1 R Established
160) Washer 12() 20-53-08 R Established
161) Thrust Washer() 334-79 R Established
162) Wood Screw lock() 356-90 R Established
Category : DP
Grade : II
Size : M
1Engine Factory Avadi

Name Specification Use Status
1) PIPE V46[62]() Specification : PIPE TO DRG NO SB 435-09-14 C Estab
Category :
Grade : Grade III
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) AIR STARTING PIPE LINE[62] TO DRG.NO. SB 322-00-9() Specification : SB 322-00-9 C Estab
2) PIPE TO FUEL PUMP[62] TO DRG.NO. SB 3335-07-19() Specification : SB 3335-07-19 C Estab
Category :
Grade : Grade III
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) COMPRESSED AIR STARTING TUBING ASSY [62] TO DRG.NO.SB 322-00-9() Specification : COMPRESSED AIR STARTING TUBING ASSY TO DRG.NO.SB 322-00-9 C Estab
2) PIPE TO FUEL PUMP [62] TO DRG NO. SB 3335-07-19() Specification : PIPE TO FUEL PUMP TO DRG NO. SB 3335-07-19 C Estab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) ALL TYPES OF METALLIC PIPELINES[62]() Specification : ALL TYPES OF METALLIC PIPELINES E Nonestab
Category : p
Grade : Grade I
Size : S
1Engine Factory Avadi

Name Specification Use Status
1) PIPELINE[62]() Specification : PIPE LINE TO DRG NO.SB 3335-12-19 C Estab
Category :
Grade : Grade III
Size : S
1200 INDO AUTOTECH LIMITED,
PLOT NO. 332-338, SECTOR - 24, FARIDABAD HARIYANA
PIN1 : 121005
Phone No. : 09971499488
GSTIN : 06AABCI6282N2Z5 		AABCI6282N

Download 		1Ordnance Factory Bhusawal

Name Specification Use Status
1) LINK FOR HANDLE() AS PER DRG./SPECIFICATION C ESTAB.
2) BOTTOM FRAME FOR CARRIER 13A() AS PER DRG./SPECIFICATION C ESTAB.
3) TOP FRAME FOR CARRIER 13A() AS PER DRG./SPECIFICATION C ESTAB.
4) HINGE PIN() AS PER DRG./SPECIFICATION C ESTAB.
5) LINK HOLDING END FOR BOX H2A() AS PER DRG./SPECIFICATION C ESTAB.
6) ANGLE PLATE VERTICAL() AS PER DRG./SPECIFICATION C ESTAB.
7) HANDLE CLIP FOR BOX H5A() AS PER DRG./SPECIFICATION C ESTAB.
8) BRACKET A-1 FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
9) BRACKET CARTRIDGE FRONT FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
10) BRACKET B-2 FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
11) BOTTOM CORNER PIECE FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
12) LID CORNER PIECE FOR BOX C-53A() AS PER DRG./SPECIFICATION C ESTAB.
13) SUB-ASSLY. OF LINK & HANDLE() AS PER DRG./SPECIFICATION C ESTAB.
14) CATCH PLATE (WITH ASSLY.) FOR BOX H2A() AS PER DRG./SPECIFICATION C ESTAB.
15) PIECE PACKING - A() AS PER DRG./SPECIFICATION C ESTAB.
16) PIECE PACKING - B() AS PER DRG./SPECIFICATIONC C ESTAB.
Category : DDP
Grade : I
Size : L

Copyright © 2025 - OFB