List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
1261 NATIONAL INDUSTRIES
123/54 SARESH BAGH KANPUR U.P.
PIN1 : 208012
Phone No. : 9415271531
GSTIN : 09AAHFN2396R1ZC 		AAMPD7969B

Download 		1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PULL THROUGH DRG NO. CQA(SA) SK-369 Description : PULL THROUGH DRG NO. CQA(SA) SK-369() Specification : AS PER DRG. R Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Brush Cleaning Chamber Description : Brush Cleaning Chamber() Specification : Brush Cleaning Chamber, ARDE/TA/94/3 DS CAT No. 1005-007745 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 21.PIN STIRUP RETAINING FORESIGHT Description : 21.PIN STIRUP RETAINING FORESIGHT() Specification : DS CAT NO. 5315-001506 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN SECURING SPINDLE MAG 7.62MM Description : PIN SECURING SPINDLE MAG 7.62MM() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ROLLER GUIDE FEED SLIDE LOWER FOR MAG Description : ROLLER GUIDE FEED SLIDE LOWER FOR MAG() Specification : DS CAT NO.3120-004657 IN FINISHED CONDITION DC NO. 25298-SA , DT.19-03-02 (MAT.ST.RD.10 MM DIA GD.535A99 WILL BE SUPPLIED BY SAF ON B/G FROM L.F.NO.0352001010 C Estab
2) EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. Description : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION.() Specification : EXTRACTOR SPRING (INNER) TO DS CAT NO. 5360-002925 DC(I) NO. 26147-SA DT- 18.01.06 IN FINISHED CONDITION. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) ENGINEERS SCREW DRIVER Description : ENGINEERS SCREW DRIVER() Specification : ENGINEERS SCREW DRIVER 1.6 X 6.5 X 150 IS:844 PT-II,MAKE-TAPARIA/JHALLNI ONLY C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN PISTON EXTENSION FOR JVPC Description : PIN PISTON EXTENSION FOR JVPC() Specification : PIN PISTON EXTENSION FOR JVPC 5.56 MM AS PER DRAWING NO. (0204-03-02-00-04-002-00DB) C Estab
2) PIN LOCKING WHEEL REAR SIGHT FOR JVPC Description : PIN LOCKING WHEEL REAR SIGHT FOR JVPC() Specification : PIN LOCKING WHEEL REAR SIGHT DRG NO. 0204 03 02 00 01 004 00DA FOR JVPC 5.56MM C Estab
3) PIN LOCKING PLUNGER BUTT LOCK FOR JVPC Description : PIN LOCKING PLUNGER BUTT LOCK FOR JVPC() Specification : PIN LOCKING PLUNGER BUTT LOCK FOR JVPC 5.56 MM AS PER DRAW. NO.(0204 03 02 03 22 004 00DC) C Estab
4) ENGINEERS BALL PEIN HAMMER 200 GRAMS TO IS 841 1983 Description : ENGINEERS BALL PEIN HAMMER 200 GRAMS TO IS 841 1983() Specification : ENGINEERS BALL PEIN HAMMER 200 GRAMS TO I.S.:841-1983 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Spring Hammer for JVPC in finished condition Description : Spring Hammer for JVPC in finished condition() Specification : Spring Hammer to Drg No. 0204-03-02-02-18-012-00DA in finished condition. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) TUBE REAR SPRING RECOIL FOR JVPC Description : TUBE REAR SPRING RECOIL FOR JVPC() Specification : TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-OODD C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SCREW SPECIAL IN FINISHED CONDN. TO DS CAT NO.5305-095385 Description : SCREW SPECIAL IN FINISHED CONDN. TO DS CAT NO.5305-095385() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) MUZZLE CAP MOULDING Description : MUZZLE CAP MOULDING() Specification : DRG. NO. 0204 04 04 00 00 001 00DA C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SLING ASSY TO DRG NO CQA SA SK 1000 D S CAT NO 1005 560750 Description : SLING ASSY TO DRG NO CQA SA SK 1000 D S CAT NO 1005 560750() Specification : SLING ASSY TO DRG. NO. CQA(SA)SK-1000,D.S.CAT NO.1005-560750 DC(I) NO. 26582-SA, DT. 17-03-11 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) 3 Point Sling for JVPC Description : 3 Point Sling for JVPC() Specification : 3 Point Sling for JVPC 5.56MM Drg.No.204-04-03-00-00-000-00DA (I/Code-7012470197) C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Screw externally relieved body fixing grip pistol Description : Screw externally relieved body fixing grip pistol() Specification : Screw externally relieved body fixing grip pistol to DS CAT No. 5305-018051 DC(I) No. 26925-SA Dt.01.09.16 DRG No. ARDE SK 2689/120 in finished condition C Estab
2) Spring Locking Pin Trigger Front Description : Spring Locking Pin Trigger Front() Specification : SPRING LOCKING PIN TRIGGER FRONT & PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-004- 00DA. C Estab
3) SPRING LOCKING PIN TRIGGER MECHANISM FOR JVPC Description : SPRING LOCKING PIN TRIGGER MECHANISM FOR JVPC() Specification : SPRING LOCKING PIN TRIGGER MECHANISM FOR JVPC 5.56MM DRG.NO.0204-03-02-02-18-021-00DA C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle Description : Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle() Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle C Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) Protective Ring() Drg. No. SK-8944 C Established
2) Spring of Semi Automatic Gear () Drg. No. 2A26-02-108, DS CAT No. 1015-002857 required for T-72 Ordnance C Established
3) Lifting Plug() as per Drg. No. 5191856 C Non Established
4) Pipe Disc () as per Drg. No. SK-9366 C Non Established
5) Base Plate for Shell 105 mm IFG HE() as per Drg. No. ISX-384 C Non Established
6) Nylon Ring () as per Drg. No. ISX-426 C Non Established
7) Polythene Bag() as per Drg. No. SK-8380/B C Non Established
Category : P
Grade : III
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Rivet Flat Head for Housing Body Barrel Extension and Bracket Front Description : Rivet Flat Head for Housing Body Barrel Extension and Bracket Front() Specification : Rivet Flat Head for Housing Body Barrel Extension and bracket front to Drg. No. SK-3145/10 Phosphated to Spech-JSS-0465-01-1988 Class II Oil Finish C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) LEVER PIN LOCKING FOR INSAS 5 56MM Description : LEVER PIN LOCKING FOR INSAS 5 56MM() Specification : Lever Pin Locking to Drg. No. CQA (SA) SK-588/1 DC (I) No. 26933-SA Dt 07.09.16 in finished condition. DS CAT No. 1005-560293 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN STUD COCKING and RECOIL FOR JVPC Description : PIN STUD COCKING and RECOIL FOR JVPC() Specification : PIN STUD COCKING & RECOIL FOR JVPC 5.56 MM AS PER DRAWING NO (0204 03 04 00 01 014 00DA) C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SLING ASSEMBLY FOR SMALL ARMS() AS PER DRAWING C Estab.
2) BUCKLE ASSEMBLY FOR SMALL ARMS() AS PER DRAWING C Estab.
3) MAGAZINE COMPONENTS OF 7.62 GUN() AS PER DRAWING C Estab.
4) MAGAZINE COMPONENTS OF 9 MM GUN() AS PER DRAWING C Estab.
5) PLUNGER HOD ( Molding) to DS CAT NO. 4933-00770() AS PER DRG. C Non Established
Category : P
Grade : III
Size : S
1) Small Arms Factory
Name Specification Use Status
1) SLING ASSEMBLY FOR SMALL ARMS[70]() Specification : AS PER DRAWING C Estab
2) BUCKLE ASSEMBLY FOR SMALL ARMS[70]() Specification : AS PER DRAWING C Estab
3) MAGAZINE COMPONENTS OF 7.62 GUN[70]() Specification : AS PER DRAWING C Estab
4) MAGAZINE COMPONENTS OF 9 MM GUN[70]() Specification : AS PER DRAWING C Estab
5) PLUNGER HOD ( Molding) to DS CAT NO. 4933-00770[70]() Specification : AS PER DRG. C Estab
6) SPRING PIN LOCKING CUP AND PISTOL GRIP FOR JVPC DRG NO. 0204-03-02-00-11-002-00DA[70]() Specification : SPRING PIN LOCKING CUP AND PISTOL GRIP FOR JVPC DRG NO. 0204-03-02-00-11-002-00DA C Nonestab
Category : P
Grade : III
Size :
1) Small Arms Factory
Name Specification Use Status
1) Pin for Pin Safety in finished condition of Striker Mechanism[70]() Specification : Pin for Pin Safety in finished condition as per Drawing No NAD 7606/1A of Striker Mechanism No 8 MK-1 C Nonestab
Category : P
Grade : III
Size :
1) Small Arms Factory
Name Specification Use Status
1) Link for JVPC[7012470234]() Specification : LINK FOR JVPC 5.56MM DRG. NO.0204-03-02-18-30-001-00DF C Estab
2) REXINE SYNTHETIC POUCH FOR REVOLVER[71]() Specification : REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) C Estab
3) PIN AUTO SEAR FOR JVPC[70]() Specification : PIN AUTO SEAR FOR JVPC 5.56MM DRG.NO. 0204-03-02-02-18-017 00DB C Estab
4) Pin Lever Catch Magazine for JVPC[70]() Specification : Pin Lever Catch Magazine for JVPC 5.56MM Drg. No. 0204-03-02-02-18-020-00DA C Estab
Category : P
Grade : III
Size :
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) FORGING RECEIVER GUIDE FRONT RIGHT Description : FORGING RECEIVER GUIDE FRONT RIGHT() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*3 C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC Description : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC() Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) WASHER PLUG FOR MAG Description : WASHER PLUG FOR MAG() Specification : DS CAT NO. 5310-012252 DC(I) NO. 27105-SA DT- 20.06.17 IN FINISHED CONDITION. C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET BOTTOM PLATE 5320 000945 FOR MAG Description : RIVET BOTTOM PLATE 5320 000945 FOR MAG() Specification : RIVET BOTTOM PLATE DS CAT NO. 5320 - 000945 PT.NO.2025Z DC(I) NO. 27286-SA DT- 14.02.21 IN FINISHED CONDITION C Estab
2) RIVET FRONT GUIDE MEDIUM SKM 876 Description : RIVET FRONT GUIDE MEDIUM SKM 876() Specification : RIVET FRONT GUIDE MEDIUM SKM-876* C Estab
Category : ddp
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) RIVET FRONT GUIDE SHORT FOR MAG Description : RIVET FRONT GUIDE SHORT FOR MAG() Specification : DRG.NO.SKM-876B* D.A.NO.- 81/16 C Estab
Category : p
Grade : 3
Size : S
1) Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm Description : Blank for Casing Barrel drg .no. SK-5252 for Carbine 9mm() Specification : AS PER DRG. C Estab
2) Blank for Ring CAP for Carbine 9mm Description : Blank for Ring CAP for Carbine 9mm() Specification : BLANK FOR RING CAP TO DRG.NO-SK-5183*.D.A. NO. 04/17 DT. 18.01.17 C Estab
3) St. Forging Cylinder Gas Drg No. SKM-306 x 3 Description : St. Forging Cylinder Gas Drg No. SKM-306 x 3() Specification : AS PER DRG. C Estab
4) 10.Forging of Mag 7.62mm component Bracket back sight Description : 10.Forging of Mag 7.62mm component Bracket back sight() Specification : AS PER DRG. C Estab
5) St Forging Plate Bottom for MAG Description : St Forging Plate Bottom for MAG() Specification : DRG No. SKM-283*2 C Estab
6) FORGING RECEIVER GUIDE FRONT RIGHT for MAG Description : FORGING RECEIVER GUIDE FRONT RIGHT for MAG() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Estab
7) Forging of Breech Block slide DS CAT no. 281*2 Description : Forging of Breech Block slide DS CAT no. 281*2() Specification : AS PER DRG. C Estab
8) ST-Forging Lever Locking DSCAT No. SKM-303 Description : ST-Forging Lever Locking DSCAT No. SKM-303() Specification : AS PER DRG. C Estab
9) CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R Description : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R() Specification : CORD NYLON FOR REVOLVER, DRG. NO. SK-5574R NOTE:CORD NYLON SIZE 1.6MMX2MTR WITH QUALITY PLATED HOOK OF MATCHING COLOUR- BLACK/BROWN/BURGANDI C Estab
10) CLIP COVER FOR REVOLVER DRG NO SK 5573 R Description : CLIP COVER FOR REVOLVER DRG NO SK 5573 R() Specification : CLIP COVER FOR REVOLVER, DRG. NO. SK- 5573R NOTE: REVOLVER CLIP COVER OF BUFF BURNISH (HARDNESS LEATHER) DRUM DYED AS PER IS:580 COLOUR:BLACK/BROWN/BURGANDI C Estab
11) Adopter for Cleaning of Bore by pull Through Description : Adopter for Cleaning of Bore by pull Through() Specification : ADOPTER FOR CLEANING OF BORE BY PULL THROUGH OF RIFLE 5.56MMTO DRG.NO. CQA(SA)-180 DS CAT NO.1005-560405 DC (I)26520-SA DT.10/07/2010 C Estab
12) Fore Sight Drg. No. ARDE SK 3143/1 Description : Fore Sight Drg. No. ARDE SK 3143/1() Specification : AS PER DRG C Estab
13) SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 Description : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008() Specification : SPRING HELICAL COMPRESSION EXTRACTOR (INNER) TO DRG. NO. ARDE SK NO. 3143/74 DS CAT NO. 5360-007115 DC(I) NO. 26402-SA DT- 22.02.2008 C Estab
14) SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56 Description : SPRING HELICAL TORSION CATCH MAGAZINE FOR AMOGH CARBINE 5 56() Specification : SPRING HELICAL TORSION CATCH MAGAZINE TO DRG.NO. ARDE SK-2689/115.DS CAT NO-5360-007121. DC(I)NO-26936 SA DTD-08-09-16. C Estab
15) FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION Description : FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION() Specification : FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION C Estab
16) COVER GUN MUZZLE Description : COVER GUN MUZZLE() Specification : COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751 C Estab
17) RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56 Description : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT FOR CARBINE 5 56() Specification : RIVET FLAT HEAD FOR HOUSING BODY AND CHANNEL LEFT TO DRG. NO-SK-3170 PROTECTIVE FINISH :-PHOSPHATED TO SPECN.JSS 0465-01-1988 CLASS II OIL FINISH. C Estab
18) PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56 Description : PIN STRAIGHT HEADED CATCH MAGAZINE IN FINISHED CONDITION FOR AMOGH CARBINE 5 56() Specification : PIN STRAIGHT HEADED CATCH MAGAZINE TO DRG.NO-ARDE/SK-3143/49IN FINISHED CONDITION. DS CAT NO. 5315-009193 DC(1)26461-SA DT.24-08-09 C Estab
19) REFLECTOR IN FINISHED CONDITION FOR LMG 5 56 Description : REFLECTOR IN FINISHED CONDITION FOR LMG 5 56() Specification : REFLECTOR,GM 5.56MM1A1 ,TO DRG NO. CQA(SA) SK - 741,DS CAT NO.1005-560616 , DC(I) NO. 26971-SA,DT. 18-11-16 IN FINISHED CONDITION C Estab
20) HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION Description : HOUSING LUG SLING DS CAT NO 1005 008021 IN FINISHED CONDITION() Specification : HOUSING LUG SLING TO DRG. NO. ARDE SK- 3145/80, DS CAT NO. 1005-008021 IN FINISHED CONDITION. DC(I) NO. 26949-SA ,DT. 27-09-16 C Estab
21) PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56 Description : PIN LOCK SEAR SAFETY TO DS CAT NO 5315 009215 FOR CARBINE 5 56() Specification : PIN LOCK SEAR SAFETY TO DRG.NO- ARDE/SK-3143/44 DS CAT NO.5315-009215 DC(I)NO.26934-SA DT.07.09.16. C Estab
22) Pin Locking Pin Firing in F/D Cond. To DSCAT NO. 5315-010101 Description : Pin Locking Pin Firing in F/D Cond. To DSCAT NO. 5315-010101() Specification : AS PER DRG. C Estab
23) GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010 Description : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010() Specification : GUARD TRIGGER TO DRG. NO. ARDE SK- 2689/80 IN FINISHED CONDITION.DS CAT NO-1005-007862 DC(1)NO-26518-SA DTD-06-07-2010 C Estab
24) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM Description : BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM() Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition C Estab
25) GUIDE SPRING RECOIL REAR for CARBINE 5 56 Description : GUIDE SPRING RECOIL REAR for CARBINE 5 56() Specification : GUIDE SPRING RECOIL REAR ARDE SK2689/286 DS CAT NO-1005-007809.DC(1) 26920-SA DT-26.08.16 C Estab
26) TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 Description : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10() Specification : TOOL CLEANING GAS HOLE ASSY.(GM 5.56MM 1A1) TO DS CAT NO. 4933-000796 , DC(I) NO. 26493-SA, DT. 22-02-10 C Estab
27) SPRING CARRYING HANDLE FOR LMG 5 56 Description : SPRING CARRYING HANDLE FOR LMG 5 56() Specification : SPRING CARRYING HANDLE LMG 5.56 DS CAT NO.5360-026792 DC(I) NO. 26563-SA, DT.21.01.11 C Estab
28) SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016. Description : SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016.() Specification : SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016. C Estab
29) Bearing back sight pin Description : Bearing back sight pin() Specification : BEARING BACK SIGHT PIN,D S CAT NO-1005-000825 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)26877-SA-DT.27-06-16 C Estab
30) BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99. Description : BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99.() Specification : BRACKET D S C A T NO-1005-000863 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24384-SA-DT.03-06-99. C Estab
31) MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 Description : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000() Specification : MOUTH PIECE MAGAZINE D S CAT NO- 1005-000874 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24752-SA-DT.16-06-2000 C Estab
32) PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. Description : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16.() Specification : PEG LOCATING D S CAT NO-1005-000877 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1. DC(I)-26883-SA-DT.04-07-16. C Estab
33) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. Description : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95.() Specification : PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. C Estab
34) PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04. Description : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04.() Specification : PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04. C Estab
35) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION() Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681 C Estab
36) SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 Description : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006() Specification : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 C Estab
37) PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. Description : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007.() Specification : PIN EXTRACTOR D S CAT NO -5315-002012 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA DT,21-05-2007. C Estab
38) Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine Description : Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine() Specification : AS PER DRG.DS CAT No. 5305-005080 C Estab
39) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 Description : Plate form Assy. In Finished Cond. DS CAT No. 1005-000978() Specification : AS PER DRG. C Estab
40) PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM Description : PIN SPRING STOP DS CAT NO 5315 002026 IN FINISHED CONDITION FOR CARBINE 9MM() Specification : PIN SPRING STOP DS CAT NO 5315-002026 DC(I)NO.24969 DATED 19-03-2001 IN FINISHED CONDITION C Estab
41) SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM Description : SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM() Specification : SCREW GRUB B.A. STEEL CONICAL POINTED DS CAT NO.5305-005079 DC-26341-SA DATED 01-06-07 C Estab
42) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Description : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001() Specification : ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 C Estab
43) PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. Description : PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003.() Specification : PIN ICR 1188 FOR MAGAZINE 9MM DS CAT NO.1005-000980 DC(I)NO.25691-SA DATED 03.03.2003. C Estab
44) PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001 Description : PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001() Specification : PIN RIVETTING DS CAT NO. 5315-002018 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM . D C NO.25065-SA, DT: 10/07/2001 C Estab
45) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016. Description : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016.() Specification : PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016. C Estab
46) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016. Description : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016.() Specification : PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016. C Estab
47) WHEEL LOCK Drg. No AKC-01/1 Description : WHEEL LOCK Drg. No AKC-01/1() Specification : AS PER DRG C Estab
48) CHANNEL LEFT Drg. No AKC-03/6 Description : CHANNEL LEFT Drg. No AKC-03/6() Specification : AS PER DRG C Estab
49) Guide assy. -2 Drg no. AKC-09/2* Description : Guide assy. -2 Drg no. AKC-09/2*() Specification : AS PER DRG. C Estab
50) TELESCOPIC ROD IN FINISHED CONDITION FOR AMOGH CARBINE 5 56MM Description : TELESCOPIC ROD IN FINISHED CONDITION FOR AMOGH CARBINE 5 56MM() Specification : TELESCOPIC ROD TO DRG NO. AKC-09/4 IN FINISHED CONDITION FOR AMOGH 5.56MM. C Estab
51) SPRING RECOIL FOR CARBINE 5 56MM IN FINISHED CONDITION Description : SPRING RECOIL FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : SPRING RECOIL TO DRG NO.AKC-09/6* FOR CARBINE 5.56MM IN FINISHED CONDITION. C Estab
52) PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION Description : PIECE FILLER FOR CARBINE 5 56MM IN FINISHED CONDITION() Specification : PIECE FILLER DRG NO AKC 03/8 FOR CARBINE 5.56MM IN FINISHED CONDITION C Estab
53) REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM Description : REFLECTOR TO FOR CARBINE 5 56MM IN FINISHED CONDITION FOR CARBINE 5 56MM() Specification : REFLECTOR TO DRG NO.AKC-12/2 FOR CARBINE 5.56MM IN FINISHED CONDIION. C Estab
54) SPRING HOD FOR JVPC DRG.NO.0204-03-02-00-01-008-00XA Description : SPRING HOD FOR JVPC DRG.NO.0204-03-02-00-01-008-00XA() Specification : SPRING HOD FOR JVPC DRG.NO.0204-03-02-00-01-008-00XA C Estab
55) SPRING REAR SIGHT FOR JVPC 5.56MM DRG.NO.0204-03-02-00-01-012-00DA Description : SPRING REAR SIGHT FOR JVPC 5.56MM DRG.NO.0204-03-02-00-01-012-00DA() Specification : SPRING REAR SIGHT FOR JVPC 5.56MM DRG.NO.0204-03-02-00-01-012-00DA C Estab
56) Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD Description : Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD() Specification : Button Catch Magazine for JVPC 5.56MM DRG No. 0204-03-02-02-19-002-00DD C Estab
57) Rod Front Spring Recoil for JVPC Description : Rod Front Spring Recoil for JVPC() Specification : Rod Front Spring Recoil for JVPC 5.56MM DRG. No. 204-03-02-00-06-003-00DD C Estab
58) TUBE MIDDLE SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-002-00DC Description : TUBE MIDDLE SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-002-00DC() Specification : TUBE MIDDLE SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-002-00DC C Estab
59) TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC Description : TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC() Specification : TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-00DC C Estab
60) MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III Description : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III() Specification : MAIN SPRING STRIP TO DRG NO PHMK-III-1-10 IN FINISHED CONDIT ION REQD.FOR REVOLVER MK-III C Estab
61) PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION Description : PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION() Specification : PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION C Estab
62) PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION Description : PIN FIXING BARREL TO DRG NO PH 1 9 IN FINISHED CONDITION() Specification : PIN FIXING BARREL TO DRG NO.PH-1-9 IN FINISHED CONDITION. D.A. NO. 19/09 DT. 15-05-2009 C Estab
63) Blade Foresight Drg. No. PHMK-IV Description : Blade Foresight Drg. No. PHMK-IV() Specification : AS PER DRG. C Estab
64) PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 Description : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99() Specification : PIN EXTRACTOR PH-10-2 IN FINISHED CONDITION. STORE TO BE SUPPLIED IN SOFT CONDITION (WITHOUT HEAT TREATMENT) D.A. NO. 88/99 DT. 2/7/99 C Estab
65) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97 Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97() Specification : AS PER DRG. C Estab
66) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER Description : SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER() Specification : SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03 C Estab
67) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 C Estab
68) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Description : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04() Specification : SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 C Estab
69) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER Description : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER() Specification : SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 C Estab
70) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER Description : SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER() Specification : SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 C Estab
71) WASHER FRONT GUIDE RIGHT FOR MAG Description : WASHER FRONT GUIDE RIGHT FOR MAG() Specification : DS CAT NO 5310-011400 DC(I) NO 27105-SA DT-20/06/2017 IN FINISHED CONDITION. C Estab
72) BUTTON FEED BOX for MAG Description : BUTTON FEED BOX for MAG() Specification : BUTTON FEED BOX DRG. NO DS CAT NO. 5340-016725 DC(I) NO. 27021-SA DT- 28.1.17. IN WHITE FINISH CONDITION.. C Estab
73) NUT RETAINING HANDLE for MAG Description : NUT RETAINING HANDLE for MAG() Specification : NUT RETAINING HANDLE DS CAT NO. 5310 - 002660 DC(I) NO. 25349-SA DT. 30-04-02 C Estab
74) STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. Description : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION.() Specification : STIRRUP RETAINING FORESIGHT TO DS CAT NO. 1005-000424 DC(I) NO. 26593-SA DT- 20-07-2011 IN FINISHED CONDITION. C Estab
75) COVER for MAG Description : COVER for MAG() Specification : COVER TO DS CAT NO. 1005-000446 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION. C Estab
76) ROLLER GUIDE FEED SLIDE UPPER FOR MAG Description : ROLLER GUIDE FEED SLIDE UPPER FOR MAG() Specification : DS CAT NO. 3120-004658, DC NO.27108-SA,DT.23-06-17 IN FINISHED CONDITION (MATL.ST ROD.10 MM DIA WILL BE SUPPLIED BY S.A.F.ON B/G FROM L.F.NO.0352001010AS PER DRG.AS PER DRG. C Estab
77) SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG Description : SPRING ADJUSTING SCREW FORESIGHT HOUSING BLOCK FOR MAG() Specification : DS CAT NO. 5360-000511 DC(I) NO. 25384-SA DT- 04.06.2002 IN FINISHED CONDITION.AS PER DRG C Estab
78) 8.PLUNGER CONTROL REAR SIGHT LEAF Description : 8.PLUNGER CONTROL REAR SIGHT LEAF() Specification : DS CAT NO. 1005-000536 C Estab
79) ROLLER FOR MAG Description : ROLLER FOR MAG() Specification : DRG NO. 1005-000559 DC(I) NO. 25307-SA DT-26/03/2002 IN FINISHED CONDITION.AS PER DRG. C Estab
80) SPRING LINK PIN TO DS CAT NO 1005 000567 FOR MAG Description : SPRING LINK PIN TO DS CAT NO 1005 000567 FOR MAG() Specification : SPRING, LINK PIN TO DS CAT NO. 1005-000567 DC(I) NO. 27107-SA DT- 21/06/2017 IN FINISHED CONDITION. C Estab
81) HANDLE COCKING SLIDE DS CAT 1005-006630 Description : HANDLE COCKING SLIDE DS CAT 1005-006630() Specification : AS PER DRG C Estab
82) TELESCOPIC ROD RETURN SPRING Description : TELESCOPIC ROD RETURN SPRING() Specification : DS CAT NO.1005-006845DC(I) NO.25343-SA, DT.26.04.02, C Estab
83) SPRING COVER CATCH IN FINISHED CONDITION FOR MAG Description : SPRING COVER CATCH IN FINISHED CONDITION FOR MAG() Specification : DS CAT NO.5360-006984 DC(I)NO.27018-SA DT.27.01.17. C Estab
84) Stem Roller FOR MAG Description : Stem Roller FOR MAG() Specification : STEM ROLLER FOR MAG 7.62 IN FINISHED CONDITION DS CAT NO. 5307-000873 DC (I)NO.27020-SA DT.28.01.17 C Estab
85) FRONT AND REAR FEED PAWLS AXIS Description : FRONT AND REAR FEED PAWLS AXIS() Specification : FRONT AND REAR FEED PAWLS AXIS TO DS CAT NO. 5315-001513 DC(I) NO. 27015-SA DT- 16-01-17 IN FINISHED CONDITION. C Estab
86) PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG Description : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL for MAG() Specification : PIN STRAIGHT HEADED CARTRIDGE GUIDE PAWL TO DS CAT NO. 5315-001514 DC(I) NO. 27020-SA DT-28.01.17 IN FINISHED CONDITION. C Estab
87) STOP PIN DETENT COCKI.SLIDE MAG 7.62MM Description : STOP PIN DETENT COCKI.SLIDE MAG 7.62MM() Specification : AS PER DRG. C Estab
88) PIN STRAIGHT HEADED EJECTOR for MAG Description : PIN STRAIGHT HEADED EJECTOR for MAG() Specification : DS CAT NO. 5315-001521 DC(I) NO. 25359-SA DT. 10.05.2002 (WITH SAF MATERIAL) C Estab
89) RETAINING PIN FEED STUD FOR MAG Description : RETAINING PIN FEED STUD FOR MAG() Specification : RETAINING PIN, FEED STUD TO DS CAT NO. 5315-001526 DC(I) NO. 27012-SA DT- 14.01.17 IN FINISHED CONDITION. C Estab
90) PIN STRAIGHT HEADLESS RETAINING SLEEVE for MAG Description : PIN STRAIGHT HEADLESS RETAINING SLEEVE for MAG() Specification : PIN STRAIGHT HEADLESS (RETAINING SLEEVE) TO DS CAT NO. 5315-001536 DC(I) NO. 27012-SA DT- 14.1.17 IN FINISHED CONDITION. . C Estab
91) WASHER BRAZING BUSH FOR MAG Description : WASHER BRAZING BUSH FOR MAG() Specification : S CAT NO. 5310-011901 DC(I) NO. 25352-SA DT- 04.5.02 IN FINISHED CONDITION. C Estab
92) RIVET CARTRIDGE STOP for MAG Description : RIVET CARTRIDGE STOP for MAG() Specification : DS CAT NO. 5320-002188 DC(I) NO. 27016-SA DT- 19.01.17 IN FINISHED CONDITION. C Estab
93) 12.RIVET REAR PLATE Description : 12.RIVET REAR PLATE() Specification : DS CAT NO. 5320-002189 C Estab
94) WASHER KEY FOR MAG Description : WASHER KEY FOR MAG() Specification : DS CAT NO. 5310-002663 DC(I) N0. 25349-SA DT- 30.04.2002 IN FINISHED CONDITION. C Estab
95) WASHER PART NO 502 FOR MAG Description : WASHER PART NO 502 FOR MAG() Specification : DS CAT NO. 5310-002664 DC(I) NO. 25349-SA DT- 30.4.02 IN FINISHED CONDITION. C Estab
96) SPRING CARRYING HANDLE CATCH Description : SPRING CARRYING HANDLE CATCH() Specification : DS CAT NO. 5360-002919 DC(I) NO. 27018-SA DT- 27.01.17 IN FINISHED CONDITION. C Estab
97) STOP SCREW REARSIGHT CURSOR FOR MAG Description : STOP SCREW REARSIGHT CURSOR FOR MAG() Specification : DS CAT NO. 5305-004282 DC (I) NO. 25343-SA DT. 26.4.02 IN FINISHED CONDITION. C Estab
98) PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION. Description : PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION.() Specification : PIN RETAINING COCKING STUD TO DS CAT NO. 5315-004848 DC(I) N0. 25370-SA DT- 22/05/2002 IN FINISHED CONDITION. C Estab
99) ADJUSTING SCREW, FORESIGHT HOUSING BLOCK TO DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02 IN FINISHED CONDITION. (WITHOUT HEAT TREATMENT) Description : ADJUSTING SCREW, FORESIGHT HOUSING BLOCK TO DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02 IN FINISHED CONDITION. (WITHOUT HEAT TREATMENT)() Specification : ADJUSTING SCREW, FORESIGHT HOUSING BLOCK TO DS CAT NO. 1005-006613 DC(I) NO. 25317-SA DT- 03.04.02 IN FINISHED CONDITION. (WITHOUT HEAT TREATMENT) C Estab
100) SLEEVE BOLT COVER DSCAT 1005-006624 Description : SLEEVE BOLT COVER DSCAT 1005-006624() Specification : AS PER DRG C Estab
101) LINK ROLLER for MAG 7 62MM Description : LINK ROLLER for MAG 7 62MM() Specification : LINK ROLLER TO DS CAT NO.1005-000467 DC(I)25298 SA DT. 19.3.02 IN FINISHED CONDITION. (STRD.10MMDIA GD-534A99WILL BE SUPPLIED BY SAF ON B/G LF0352002010) AS PER DRG. C Estab
102) PLATE REAR FOR MAG Description : PLATE REAR FOR MAG() Specification : AS PER DRG C Estab
103) 14.BUSHING BLANK Description : 14.BUSHING BLANK() Specification : AS PER DRG. C Estab
104) Handle Cocking Slide without Anodizing DRG No. SKM-1004 Description : Handle Cocking Slide without Anodizing DRG No. SKM-1004() Specification : Handle Cocking Slide without Anodizing DRG No. SKM-1004 C Estab
105) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 Description : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142() Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142 C Estab
106) TOOL ADJUSTING FOR MAG Description : TOOL ADJUSTING FOR MAG() Specification : DS CAT NO.1005-000766 DC(I) NO.24257-SA DT.14-01-99 IN FINISHED CONDITION. C Estab
107) Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768 Description : Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768() Specification : Cleaning Tool SA No.-2 MK-1 to DS CAT No. 1005-000768 C Estab
108) WALLET EMPTY DS CAT NO. 3770-060959 FOR 5.56 MM LMG & RIFLE Description : WALLET EMPTY DS CAT NO. 3770-060959 FOR 5.56 MM LMG & RIFLE() Specification : Wallet Empty (for 5.56MM RIFLE/LMG) to DRG. No. CQA(SA)SK468, DS CAT NO. 3770-060959, Sht.1 Consisting of DRG. NO. CQA(SA)SK- 468/1, DS CAT NO.3770-060959, SHT.2 .(two sheets) C Estab
109) COMBINATION PLIER Description : COMBINATION PLIER() Specification : COMBINATION PLIER TO I.S.3650:1981 TO SIZE-200MM. MAKE-TAPARIA/JHALANI ONLY C Estab
110) Post Aiming MG MK 3 DS CAT No 1290x000258 Description : Post Aiming MG MK 3 DS CAT No 1290x000258() Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition C Estab
111) PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. Description : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.() Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION. C Estab
112) Wallet SA Spare Parts & Tools No. 2MK-1 to DS CAT No. 1005-000765 finished condition (4 Shts) Description : Wallet SA Spare Parts & Tools No. 2MK-1 to DS CAT No. 1005-000765 finished condition (4 Shts)() Specification : Wallet SA Spare Parts & Tools No. 2MK-1 to DS CAT No. 1005-000765 finished condition (4 Shts) C Estab
113) 3. SLEEVE BOLT COVER Description : 3. SLEEVE BOLT COVER() Specification : DS CAT NO. 1005-006624 C Estab
Category : p
Grade : 3
Size : S
1262 MOONLITE GLUE INDUSTRIES
PLOT NO. 5 GALI NO. 9 DELHI Delhi
PIN1 : 110042
Phone No. : 27832595
GSTIN : 07AAAFM7045B1ZP 		DELM16802C

Download 		1) Ordnance Factory Ambajhari
Name Specification Use Status
1) READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004[00]() Specification : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004 R Nonestab
2) PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING[00]() Specification : SPECIFICATION JSS 8010-68:2014 (REV.NO.3) E Nonestab
3) PAINT RFU BLACK ACID PROOF[00]() Specification : SPRAYING SPECN.IND/ME/651(A)DC(I)NO.3754-ME DT.12.12.2002 E Nonestab
4) PAINT RFU AMMUNITION BITUMINOUS BRUSHING ANTI CORROSIVE BLACK[00]() Specification : JSS 8010-24:2014 (REV.NO.3) /LATEST ISSUE E Nonestab
5) PAINT RFU STOVING M or F SPRAYING LIGHT BRUNSWICK GREEN ISC 225OF IS 5 1994[00]() Specification : SPECN.NO.JSS-8010-12 E Nonestab
6) PAINT READY MIXED AIR DRYING WHITE SEMI GLOSSY FINISH FOR GENERAL PURPOSE BRUSHING[00]() Specification : SPECIFICATION IS:168-1993 (THIRD REVISION). E Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Bhusawal
Name Specification Use Status
1) PAINT RMP R/O Z/C A/D JSS-8010[10]() Specification : AS PER O.F. BHUSAWAL REQUIREMENT/SPECIFICATION R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1013401025 APC NO.219 DYED RHOD BASE JSS-8010[10]() Specification : SPECIFICATION NO.JSS-8010-48:2004, REV. NO.1. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1003110518 APC 225 (VARNISH 30%) JSS-8010-63[10]() Specification : SPECN. NO. JSS-8010-63 R Estab
2) 1003110517 APC NO 224[10]() Specification : JSS-8010-63: 2004 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168[10]() Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION) R Estab
2) 1011001001 PAINT BLACK ACID PROOF SPRAYING[10]() Specification : SPECIFICATION IND/ME/651(A) R Nonestab
3) 1011312220 PAINT OLIVE GREEN MATT FINISH[10]() Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION R Estab
4) 1011312446 PAINT RED OXIDE MATT FINISH GEN PUR[10]() Specification : ISC 446 OF IS: 5- 1994 (FOURTH REVISION) (AMDT-1) TO SPECN IS: 168-1993 (THIRD REVISION) R Nonestab
5) 1011518001 PAINT BLACK MATT FINISH SPRAYING[10]() Specification : SPECN. IS:168-1993 (THIRD REVISION) REAFFIRMED-2002 (AS APPLICABLE FOR DEFENCE USE) R Nonestab
6) 1011337012 PAINT WHITE MARKING STENCILING SGF[10]() Specification : IS: 138- 1992 R Nonestab
7) 1011535537 PAINT STENC RED SIGNAL IS 138 1992[10]() Specification : IS: 138 -1992 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992[10]() Specification : IS-138-1992 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1013400174 APC 217 TO SPCN.JSS-8010-42-2009[10]() Specification : SPECN.NO. JSS 8010-42 R Nonestab
2) 1011001001 PAINT BLACK ACID PROOF SPRAYING[10]() Specification : SPECIFICATION IND/ME/651(A) R Nonestab
3) 1013401035 VARNISH AIR DRYING AMMN IND/ME/719[10]() Specification : SPECIFICATION NO.IND/ME/719 (D) R Nonestab
4) 1011714447 PAINT RED OXIDE ZINC CHROME IS 1874[10]() Specification : IS:1874:1992 R Nonestab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) PAINT RFU SEMIGLOSS/GLOSSY/MATT OF DIFFERENT SHEDE IS-168() AS PER OFM SPECIFICATION R ESTABLISHED
2) PAINT RFU SEMIGLOSS/GLOSSY/MATT OF DIFFERENT SHEDE IS-138() AS PER OFM SPECIFICATION R ESTABLISHED
3) RED OXIDE ZINK CHROMATE PRIMER JSS-8010-68() AS PER OFM SPECIFICATION R ESTABLISHED
4) VARNISH APC() AS PER OFM SPECIFICATION R ESTABLISHED
Category : P
Grade : III
Size : S
1) Ordnance Factory Kanpur
Name Specification Use Status
1) VARNISH,OIL,STOVING() JSS-8010-28 1997 E NOT ESTAB.
2) PAINT RFU BLACK ACID PROOF TYPE-1 SPRAYING REQUIRED FOR 130MM() IND/ME/651(A) DC 2404-ME DT 4.11.81 E NOT ESTAB
3) PAINT READYMIXED AIRDRYING FOR GENERAL PURPOSE SEMIGLOSSY FINISH SPRAYING BUFF MIDDLE COLOUR REQUIRED VARIOUS STORE() ISC-359 OF IS:5:1994 E NOT ESTAB.
Category : P
Grade : III
Size : S
1) Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1010801150 APC 210 UNDYED Description : 1010801150 APC 210 UNDYED() Specification : JSS-8010-64:2009 P Estab
2) 1013400174 APC 217 TO SPCN.JSS-8010-42-2009 Description : 1013400174 APC 217 TO SPCN.JSS-8010-42-2009() Specification : SPECN.NO. JSS 8010-42 P Estab
3) 1013401020 APC 219 UNDYED Description : 1013401020 APC 219 UNDYED() Specification : JSS 8010-48 : 2004 P Estab
4) 1003110518 APC 225 (VARNISH 30%) JSS-8010-63 Description : 1003110518 APC 225 (VARNISH 30%) JSS-8010-63() Specification : SPECN. NO. JSS-8010-63 P Estab
5) 1003110517 APC NO 224 Description : 1003110517 APC NO 224() Specification : JSS-8010-63: 2004 P Estab
6) 1011518001 PAINT BLACK MATT FINISH SPRAYING Description : 1011518001 PAINT BLACK MATT FINISH SPRAYING() Specification : SPECN. IS:168-1993 (THIRD REVISION) REAFFIRMED-2002 (AS APPLICABLE FOR DEFENCE USE) P Estab
7) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168 Description : 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168() Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION) P Estab
8) 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992 Description : 1011337356 PAINT GOLDEN YELLOW SGF IS 138 1992() Specification : IS-138-1992 P Estab
9) 1011307225 PAINT LIGHT BRUNSWICK GREEN SGF Description : 1011307225 PAINT LIGHT BRUNSWICK GREEN SGF() Specification : IS: 168-1993 P Estab
10) 1011312220 PAINT OLIVE GREEN MATT FINISH Description : 1011312220 PAINT OLIVE GREEN MATT FINISH() Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION P Estab
11) 1011535537 PAINT STENC RED SIGNAL IS 138 1992 Description : 1011535537 PAINT STENC RED SIGNAL IS 138 1992() Specification : IS: 138 -1992 P Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bolangir
Name Specification Use Status
1) APC-210(NC LACQUER) TO JSS-8010-64:[10]() Specification : APC-210(NC LACQUER) TO JSS-8010-64: 2009,Rev.2,DC NO.3981-ME,Dt-24.09.2009. R Nonestab
2) APC-216(COMPO. SEALING RD-1229)[10]() Specification : APC-216(COMPO. SEALING RD-1229)TO SPECN.JSS-8010-51,WITH LATEST DC(I) R Nonestab
3) APC-219 TO JSS-8010-[10]() Specification : APC-219 TO JSS-8010-48:2012 (REV-2) DC NO.5095-ME,DT-05.10.2012.(ORANGE & RED). R Estab
Category : p
Grade : Grade III
Size : S
1) Ordnance Factory Ambernath

[ENR Registration]
Name Specification Use Status
1) VARNISH SHELLAC 20 PERCENT APC Description : VARNISH SHELLAC 20 PERCENT APC() Specification : JSS 8010 63 : 2012 Rev No.3 R Estab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Bhandara
Name Specification Use Status
1) APC Shellac Varnish[10]() Specification : VARNISH SHELLAC 30 PERCENT APC-225 CONFORMING TO SPENC. JSS- 8010-63:2012( REV.NO.3). R Estab
2) PAINT YELLOW[10]() Specification : READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2004 (FIFTH REV) AMENDMENT NO.1 1995 CONFORMING TO IS:138-1992 (THIRD REV) MAKE ASIAN,NEROLACK,BERGER IS ACCEPTABLE. R Estab
Category : p
Grade : Grade III
Size : S
1263 NARMADA SCIENTIFIC CO
H 5 GROUND FLOOR CENTRE PLAZA NAUDRA BRIDGE JABALPUR Madhya Pradesh
PIN1 : 482001
Phone No. : 4004248
GSTIN : 23AENPA0203L1Z2 		AENPA0203L

Download 		1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001450407 LEAD ACETATE (NORMAL) FOR INITIATORS[10]() Specification : SPCN. NO. JSS-6810-123 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ALUMINIUM POWDER HV GR1 60BSS JSS-1370-03 (1001017225)() ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS. R NOT ESTABLISHED
Category : S
Grade : II
Size : O
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ALUMINIUM POWDER HV GR1 60BSS JSS-1370-03 (1001017225)[10]() Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS. R Nonestab
2) BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION item code 1001015748[10]() Specification : BUTYL ALCOHOL AS PER RUSSIAN SPECIFICATION NO.GOST 5208-81 GRADE-PREMIUM MAKE: RANKEM/MERCK/THERMO FISHER SIZE:1 LITRE/ 1.5 LITRE/ 2 LITRE R Nonestab
3) ACETONE(1001010103)[10]() Specification : IS 170-2004 (4TH REV.) R Nonestab
4) ACID BORIC, SQ GRD IS: 10116-1982 (1001010623)[10]() Specification : SPECN:-IS-10116-1982 (AMENDMENT NO.1 REAFFIRMED 1989) OR EQUIVELANT GRADE OF 99.0% PURITY. R Nonestab
5) ANTIMONY SULPHIDE ITEM CODE 1001022307[10]() Specification : SPECN:- JSS-6810-71 2008(REVISION NO.3) R Nonestab
6) BARIUM CHROMATE ITEM CODE 1001050349[10]() Specification : BARIUM CHROMATE (1) APPARENT DENSITY 0.35 T0 0.65 g/ml. (2) MEAN DIAMETER OF PARTICLE 2.0 MICRO MAS TO SPECN:- IND/ME/794 (b) 2013 ///DC NO. 5177- ME DATED 20/01/2014 R Nonestab
7) DIAMMONIUM HYDRO ORTHO PHOSPHATE AR ITEM CODE 1001131903[10]() Specification : DI AMMONIUM HYDRO ORTHO PHOSPHATE GRADE AND MAKE EXCELLAR GRADE OF QUALIGEN OR GR GRADE OF E-MERCK OR ANALAR GRADE OF BDH OR AR GRADE OF RANABAXY OR GR GRADE OF LABA OR AR GRADE OF S.D. FINE OR AR GRADE OF CDH ONLY ACCEPTABLE. R Estab
8) DYE ANILINE BLUE BASE COLOUR (1010501007)[10]() Specification : SPECN- JSS 6820-03:2009 (REVISION NO.2) R Estab
9) LEAD ACETATE (NORMAL) TO SPECN: JSS-6810-123:2008 REVISION NO-2).(1001450413)[10]() Specification : LEAD ACETATE (NORMAL) TO SPECN: JSS-6810-123:2008 REVISION NO-2). R Nonestab
10) Lead nitrate Normal item code1001450037[10]() Specification : LEAD NITRATE (NORMAL) TO JSS 6810-80-2011 (REV NO. 2) DC NO. 5048 -ME DT. 15/11/2011 ALONGWITH FOLLOWING PARAMETERS: APPERANCE : PURE WHITE , CRYSTALLINE, PURITY: MIN. 98.5%, COPPER: MAX. 0.001%, INSOLUBLE IN WATER: MAX 0.02%, MAKE:SQ GRA R Estab
11) POTASSIUM CHLORIDE MIN ASSAY 99 POINT 5 PERCENT ITEM CODE 1001617608[10]() Specification : POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 % R Estab
12) POTASSIUM PERCHLORATE IN POWDER FORM (1001622227)[10]() Specification : POTASSIUM PERCHLORATE IN POWDER FORM SIZE (1) ALL PASS 100 BSS/150 MICRON (2) ALL RETAIN 200 BSS/75 MICRON TO SPECN- JSS 6810-58:2014 (Revision No. 4) DC NO. 5320-ME DT. 31/03/2015. R Nonestab
13) RED LEAD ITEM CODE 1001450105[10]() Specification : RED LEAD TO SPECN: IS - 8063 - 1976.(Reaffirmed 2005) R Nonestab
14) STRONTIUM NITRATE 60BSS IS 5671 ITEM CODE 1001732200[10]() Specification : SPECN: IS-5671-1984 (FIRST REV.) (REAFFIRMED 2005) AMENDMENT-1 AUGUST-1990 DC-5371-ME DT 28.07.2015 R Estab
15) SODIUM AZIDE (1001714903)[10]() Specification : SODIUM AZIDE TO SPECN.JSS-6810-79:2003 (REV.NO.1) (REAFF 2011) DC NO.5046-ME DT.15/12/2011 R Nonestab
16) SULPHUR GR 1 ITEM CODE 1001734157[10]() Specification : SULPHUR GR. 1 IN LUMPS FORM TO SPECN :- JSS-6810-103:2017 (REV NO. 4) DC NO. 5099-ME DT. 21/12/2012. R Estab
17) TRICHLOROETHYLENE TECH TYPE2 IS-245 (1001773405)[10]() Specification : TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002. R Nonestab
18) ZINC OXIDE (1001941843)[10]() Specification : ZINC OXIDE 63 MICROMETER IS SIEVE "ZINC OXIDE SHOULD BE MANUFACTURED FORM ZINC SLAB" TO SPECN: JSS-6810-82:2011 REVISION NO-2). R Nonestab
Category : S
Grade : II
Size :
1) Ordnance Factory Khamaria
Name Specification Use Status
1) ACETONE(1001010103)[10]() Specification : IS 170-2004 (4TH REV.) R Nonestab
2) TRICHLOROETHYLENE TECH TYPE2 IS-245 (1001773405)[10]() Specification : TRICHLOROETHYLENE,TECH. TYPE 2 SPECN:-IS-245-1988 (3rd REV) (AMENDMENT NO.1) OF DEC.1995 AND AMEND.NO.2 OF MAY 2002. R Nonestab
3) ACID BORIC, SQ GRD IS: 10116-1982 (1001010623)[10]() Specification : SPECN:-IS-10116-1982 (AMENDMENT NO.1 REAFFIRMED 1989) OR EQUIVELANT GRADE OF 99.0% PURITY. R Nonestab
4) POTASSIUM CHLORIDE MIN ASSAY 99 POINT 5 PERCENT ITEM CODE 1001617608[10]() Specification : POTASIUM CHLORIDE, KCL MINIMUM ASSAY - 99.5 % LOSS OF DENSITY (AT 150 DEGREE CENTIGRADE)) 1.00 % R Estab
5) STRONTIUM NITRATE 60BSS IS 5671 ITEM CODE 1001732200[10]() Specification : SPECN: IS-5671-1984 (FIRST REV.) (REAFFIRMED 2005) AMENDMENT-1 AUGUST-1990 DC-5371-ME DT 28.07.2015 R Estab
6) ALUMINIUM POWDER HV GR1 60BSS JSS-1370-03 (1001017225)[10]() Specification : ALUMINIUM POWDER HEAVY GR.1, SPECN:JSS-1370-03-2014 (REV.NO 4) DC NO.5297-ME DT.16/12/14 PARTICLE SIZE ALL PASSING THROUGH 60 BSS & RETAINING ON 170 BSS OF WHICH NOT MORE THAN 50%PASSING THROUGH 120 BSS. R Nonestab
Category : S
Grade : II
Size :
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Acetone as per Russian Gost LF 1001010128 Description : Acetone as per Russian Gost LF 1001010128() Specification : Acetone as per Russian specification No. Gost 2768-84 grade-1 R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Ethyl Acetate GOST 8981 78 LF 1001171008 Description : Ethyl Acetate GOST 8981 78 LF 1001171008() Specification : Ethyl Acetate as per specification GOST 8981-78 and QAP No. F3/MANGO PROJECT/21-22 DATE 29/09/2021 R Estab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) LEAD FERRO CYANIDE[10]() Specification : SPECN: IND/ME/769 DC NO. 3754-ME DT. 12/12/02 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) CHARCOAL TYPE-C SIZE 600M (1001098350)[10]() Specification : SPECN: JSS-6810-144:2003 DC NO.3782-ME DT.25-9-2003. R Nonestab
2) SPIRIT RECTIFIED GR-I (1001729703)[10]() Specification : SPIRIT RECTIFIED GR-I TO SPECN- IS-323-1959 (REVISED) (REAFFIRMED - 2005) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) HEXA CHLORO ETHANE (1001290307)[10]() Specification : SPECN: JSS-6810-99-2011 (REVISION NO. 2) R Nonestab
2) LEAD CHROMATE TO SPECN:-MZ-66006 B. dtd 22/11/68.[10]() Specification : LEAD CHROMATE TO SPECN:-MZ-66006 B. dtd 22/11/68. R Nonestab
3) RED LEAD TO SPECN: IS - 8063 - 1976.(Reaffirmed 2005)[10]() Specification : RED LEAD TO SPECN: IS - 8063 - 1976.(Reaffirmed 2005) R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) TOLUENE PURE NITRATION GRADE[10]() Specification : TOLUENE PURE NITRATION GRADE SPECN:-IS 537-1967 (1ST REV) DC NO. 3807-ME DTD.05/05/04 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) POTASSIUM NITRATE GRADE 2 ITEM CODE 1001621720[10]() Specification : POTASSIUM NITRATE GRADE - 2 FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 ( 2nd REV) (REAFFIRMED 2003)DC NO 3810-ME DT 5/5/04 AMENDMENT NO.1 SEP.2003 R Nonestab
2) POTASSIUM NITRATE GR I ITEM CODE 1001621710[10]() Specification : POTASSIUM NITRATE Gr. I FOR EXPLOSIVE AND PYROTECHNIC COMPOSITION TO SPECN: IS-301-1982 (2ND REV.) (REAFFIRMED 2003) DC NO. 3810-ME DT. 5/5/04 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) Rectified Ethyl Alcohol as per Russian Specification No GOST 18300 87 grade Premium ITEM CODE 1001015738[10]() Specification : Rectified Ethyl Alcohol as per Russian Specification No. GOST 18300-87 grade-Premium. Size 1 Litre/1.5 litre/2 litre. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) BORAX CRYSTAL PURE GRADE(1001054123)[10]() Specification : SPECN.: IS-1109-1980 (2ND REV.) REAFFIRMED 1997 DC NO. 3777-ME DT. 25/09/03 R Nonestab
2) SILVER NITRATE (1001712400)[10]() Specification : SPECN:-IS-2214:1977 [FIRST REV] (Reaffirmed-2003). R Nonestab
3) ACID BORIC, SQ GRD IS: 10116-1982 (1001010623)[10]() Specification : SPECN:-IS-10116-1982 (AMENDMENT NO.1 REAFFIRMED 1989) OR EQUIVELANT GRADE OF 99.0% PURITY. R Nonestab
4) ACID TARTRATE OF POTASSIUM (1001620109)[10]() Specification : ACID TARTRATE OF POTASSIUM.(POTASSIUM BI TARTRATE) R Nonestab
5) KAOLIN JSS-9620-02 (1001410103)[10]() Specification : KAOLIN TO SPECN: JSS-9620-02 : 2010 REVISION NO.2 DC NO. 5000-ME DT.5-1-2011 R Nonestab
6) SILICA GEL BAGS WEIGHING 4.5 GMS (+/-) 0.5 GMS (1003250138)[10]() Specification : SILICA GEL BAGS WEIGHING 4.5GMS (+/-) 0.5GMS CONTAINING SILICA CRYSTALS/GEL OF SIZE 1.00 MM TO 2.00 MM TO SPECN. IS-3401-1992 (THIRD REVISION) (REAFFIRMED 1997) NORMAL TYPE DIMENSION OF BAGS AS PER DRG.NO. khPK-210025 a (ITEM 6) R Nonestab
7) WAX PARAFFIN SPECIAL JSS-9160-06 (1020871017)[10]() Specification : PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011 R Nonestab
8) ZINC BASED PHOSPHATING SOLUTION (1003610115)[10]() Specification : ZINC BASED PHOSPHATING SOLUTION MEANT FOR PROTECIVE PURPOSE UNDER PAINT OIL COATING CONFORMING TO IS 6005-1998 (MAKE BERGER/GRAUER & WEIL/CMP ONLY) R Nonestab
9) STRONTIUM NITRATE 60BSS IS-5671 (1001732200)[10]() Specification : SPECN: IS-5671-1984 (FIRST REV.) (REAFFIRMED 2005) AMENDMENT-1 AUGUST-1990 DC-5371-ME DT 28.07.2015 R Nonestab
10) CALCIUM SILICIDE 63M JSS-6810-107 (1001093023)[10]() Specification : CALCIUM SILICIDE 63 MICROMETER IS SIEVE TO SPECN.JSS-6810-107 :2013 (REV.NO.3) DC NO.5218-ME DT.12/4/2014 R Nonestab
11) HEXA CHLORO ETHANE (1001290307)[10]() Specification : SPECN: JSS-6810-99-2011 (REVISION NO. 2) R Nonestab
12) Magnesium Powder gr.III (1001491847)[10]() Specification : MAGNESIUM POWDER FOR EXPLOSIVE&PYROTECHNIC COMPOSITION GRIIITOSPECN-IS:2307-2004(2nd REV) R Nonestab
13) Potassium Boron Fluride (1001619908)[10]() Specification : POTASIUM BORON FLURIDE (KBF 4) LR GRADE MINIMUM ASSAY - 99.5 % (ON DRY BASIS)LOSS OF DENSITY AT 105 DEGREE CENTIGRADE - 0.40 % R Nonestab
14) REFINED BEES WAX GRADE-A (1020050113)[10]() Specification : SPECN:-IS-1504-1996 (REAFFIRMED 2002)(3RD REV.) WITH AMENDMENT NO.1 JUNE 2007 R Nonestab
15) BLEACHING POWDER STABLE GRADE II (1004050630)[10]() Specification : IS-1065-1989 (SECOND REVISION) R Nonestab
16) SILVER CYANIDE FOR ELECTRO PLATING (1001712206)[10]() Specification : SPECN :- IS-6267-1971. R Nonestab
17) COPPER NAPHTHENATE LF 1004090800[10]() Specification : COPPER NAPHTHENATE TO SPECN IS 1078-1987 (SECOND REVISION) R Nonestab
18) LEAD CHROMATE TO SPECN:-MZ-66006 B. dtd 22/11/68.(1001451708)[10]() Specification : LEAD CHROMATE TO SPECN:-MZ-66006 B. dtd 22/11/68. R Nonestab
19) CASEIN FOR AMMN. (1001095203)[10]() Specification : CASEIN FOR AMMN. TO SPECN:-JSS 6810-50:2013 (RIVISION NO. 3) DC NO. 5209-ME-12/4/2014. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) Strontium Nitrate for Pyrotechnic (1001732208)[10]() Specification : STRONTIUM NITRATE FOR PYROTECHNIC COMPOSITION SIZE: ALL PASS AT 120 BSS SIEVE TO SPECN: IS-5671-1984 (FIRST REVISION) (REAFFIRMED 2015 ) AMENDMENT- 1 AUGUST- 1990 DC- 5371- ME DT. 28/07/2015. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SILICON GREASE SURCIL COMPOUND 77 ITEM CODE 1003126420[10]() Specification : SILICON GREASE SURCIL COMPOUND 77 R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria
Name Specification Use Status
1) SULPHUR GR 1 ITEM CODE 1001734157[10]() Specification : SULPHUR GR. 1 IN LUMPS FORM TO SPECN :- JSS-6810-103:2017 (REV NO. 4) DC NO. 5099-ME DT. 21/12/2012. R Nonestab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Rectified Ethyl Alcohol as per Russian Specification No GOST 18300 87 grade Premium ITEM CODE 1001015738 Description : Rectified Ethyl Alcohol as per Russian Specification No GOST 18300 87 grade Premium ITEM CODE 1001015738() Specification : Rectified Ethyl Alcohol as per Russian Specification No. GOST 18300-87 grade-Premium. Size 1 Litre/1.5 litre/2 litre. R Nonestab
Category : s
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) ethyl alcohol lf 1001015728 Description : ethyl alcohol lf 1001015728() Specification : ethyl alcohol lf 1001015728 R Nonestab
Category : s
Grade : 3
Size : S
1264 Kanpur Fresh Supplies
109, Meerpur Cantt., Kanpur Uttar Pradesh
PIN1 : 208004
Phone No. : 7860786726
GSTIN : 09ACKPG3520B1Z4 		ACKPG3520B

Download 		1) Ordnance Equipment Factory
Name Specification Use Status
1) OUTER COMPONENTS FOR GLOVES LEATHER WHITE  (LINED) IN VARIOUS SIZES() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : III
Size : S
1265 MB METALLIC BELLOWS PVT LTD
PLOT NO. A-47 & 48 6TH MAIN ROAD SIPCOT INDUSTRIAL GROWTH CENTRE, ORAGADAM KANCHEEPURAM Tamil Nadu
PIN1 : 602105
Phone No. : 29590111
GSTIN : 33AAGCM3277L1Z7 		CHEM11855E

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 1 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 1) FOR UPGRADED MPV 4X4 E Nonestab
2) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 2 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 2) FOR UPGRADED MPV 4X4 E Nonestab
3) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 3 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 3) FOR UPGRADED MPV 4X4 E Nonestab
Category :
Grade : Grade III
Size : S
1266 SF TUBES PVT LTD
43A LAKE PLACE KOLKATA LAKE PLACE KOLKATA West Bengal
PIN1 : 700029
Phone No. : 8100919401
GSTIN : 19AAUCS5242B1Z5 		CALS46520F

Download 		1) Vehicle Factory Jabalpur
Name Specification Use Status
1) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 1 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 1) FOR UPGRADED MPV 4X4 E Nonestab
2) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 2 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 2) FOR UPGRADED MPV 4X4 E Nonestab
3) STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED DOU TYPE AS PER DRG NO 2756 57 31 A AT SL NO 3 FOR UPGRADED MPV 4X4[90]() Specification : STRIPWOUND METAL HOSE DOUBLE OVERLAP UNPACKED (DOU) TYPE (AS PER DRG NO 2756- 57- 31/ A AT SL NO 3) FOR UPGRADED MPV 4X4 E Nonestab
Category :
Grade : Grade III
Size : S
1267 SADADEKAR EXPORT IMPORT
207, JAGRUTI INDUSTRIAL PREMISES CSL., 2ND FLOOR, PANDIT SATAVALEKAR MARG (MOGUL LANE), MAHIM WEST, MUMBAI - 400 016 PANDIT SATAVALEKAR MARG (MOGUL LANE) MUMBAI Maharashtra
PIN1 : 400016
Phone No. : 24334458
GSTIN : 27ANZPS1881M1ZT 		MUMA64107B

Download 		1) Ordnance Clothing Factory Avadi

[Deemed Registration]
Name Specification Use Status
1) UHMWPE UNIDIRECTIONAL BALLISTIC FABRIC FOR HAP GRADE HB212 Description : UHMWPE UNIDIRECTIONAL BALLISTIC FABRIC FOR HAP GRADE HB212() Specification : AS PER SPECIFICATION ENCLOSED R Nonestab
2) UHMWPE UNIDIRECTIONAL BALLISTIC FABRIC FOR SAP GRADE SB71 Description : UHMWPE UNIDIRECTIONAL BALLISTIC FABRIC FOR SAP GRADE SB71() Specification : AS PER SPECIFICATION ENCLOSED R Nonestab
Category : s
Grade : 3
Size : S
1268 KORUTECH INDIA PRIVATE LIMITED
62, 1ST FLOOR, MOORE STREET, CHENNAI TAMIL NADU
PIN1 : 600001
Phone No. : 044-40500500
GSTIN : 33AACCK7163K1ZE 		CHEK10146D

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) Tungsten Carbide Inserts - Indexible (Turning, Milling, Groving, Drilling and Threading).() As per drawing E Not Established
2) Turning Tool Holders and Spares Parts.() As per drawing E Not Established
3) CNC Tooling Systems (BT/ISO/CAT/HSK).() As per drawing E Not Established
4) CBN/PCD Inserts.() As per drawing E Not Established
5) Milling Cutters and Spare Parts() As per drawing E Not Established
Category : S
Grade : II
Size : S
1269 SUNSHINE FINE CHEMSOL (I) PVT.LTD.
S. NO. 567, B1-VASTU NAGAR SOCIETY,NEAR MARKET YARD,BIBWEWADI-PUNE BIBWEWADI ROAD PUNE Maharashtra
PIN1 : 411037
Phone No. : 24260694
GSTIN : 27AAJCS6669M1ZF 		AAJCS6669M

Download 		1) Ordnance Factory Khamaria
Name Specification Use Status
1) BARIUM CHROMATE (1001050349)[10]() Specification : BARIUM CHROMATE (1) APPARENT DENSITY 0.35 T0 0.65 g/ml. (2) MEAN DIAMETER OF PARTICLE 2.0 MICRO MAS TO SPECN:- IND/ME/794 (b) 2013 ///DC NO. 5177- ME DATED 20/01/2014 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) CALCIUM OXALATE(MONOHYDRATE) SIZE 125 MICROMETER[10]() Specification : JSS : 6810-55:1994 R Estab
2) BARIUM CHROMATE[10]() Specification : IND/ME/794(A) DC 3754-ME/12-12-02. R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) POTASSIUM NITRATE GR.I ,125 MICRON IS SIEVE FOR PYROCOMPOSITION[10]() Specification : IS 301-2003 R Estab
2) Strontium Oxalate ( Monohydrated), Size 125 micron[10]() Specification : JSS-6810-32-2001 R Estab
3) BARIUM CHROMATE[10]() Specification : IND/ME/794(A) DC 3754-ME/12-12-02. R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) POTASSIUM NITRATE GR.I ,125 MICRON IS SIEVE FOR PYROCOMPOSITION[10]() Specification : IS 301-2003 R Estab
2) POTASSIUM NITRATE GR.II ,125 MICRON IS SIEVE FOR PYROCOMPOSITION[10]() Specification : IS 301-2003 R Estab
3) Strontium Oxalate ( Monohydrated), Size 125 micron[10]() Specification : JSS-6810-32-2001 R Estab
4) STRONTIUM NITRATE SIEVE SIZE 125 [10]() Specification : IS-5671: 1984 R Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Dehu Road
Name Specification Use Status
1) LEAD THIOCYNATE 90 MICRON[10]() Specification : JSS-6810-47 2008(REV-2) R Nonestab
2) SODIUM NITRATE GRADE I SIZE 125 MICRON[10]() Specification : SODIUM NITRATE GRADE I SIZE 125 MICRON TO SPCN. JSS:6810-87/2016. REV. 3 DC 6061-ME DTD. 08/06/2017 DS-CAT-NO. 6810-001 134 P Estab
Category :
Grade : Grade III
Size : S
1) Ordnance Factory Chanda
Name Specification Use Status
1) 1001050653 BARIUM NITRATE;JSS-6810-59:2001.[10]() Specification : SPECN NO. JSS 6810-59 R Nonestab
Category :
Grade : Grade III
Size : S
1271

PIN1 :
Phone No. : 		400025q005

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BARIUM CHROMATE IND ME 794 B ITEM CODE 1001050348 Description : BARIUM CHROMATE IND ME 794 B ITEM CODE 1001050348() Specification : BARIUM CHROMATE IND ME 794 B R Estab
Category : s
Grade : 3
Size : S
1272 DAMAN GANGA PACKAGING SOLUTION LLP
Plot No-326,327,328/2/A, Off Degam Road, GIDC, Vapi GIDC VAPI Vapi Gujarat
PIN1 : 396195
Phone No. : 2461423
GSTIN : 24AALFD1686J1Z7 		AALFD1686J

Download 		1) Ordnance Factory Bolangir
Name Specification Use Status
1) PAPER TUBE (AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO[63]() Specification : PAPER TUBE (AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO MATERIAL SPECN.PAPER CRAFT AMMN.TO JSS 8135-017:2016, REVISION-1 DC-5493-ME , DT-24.09.2016 C Nonestab
Category :
Grade : Grade III
Size : S
1273 PRABHAT ENGINEERING
403, NEW GOURI NAGAR NEAR ELECTRONIC COMPLEX INDORE Madhya Pradesh
PIN1 : 452010
Phone No. : 9826951292
GSTIN : 23APYPK2383P1Z1 		BPS14216N5

Download 		1) Opto Electronic Factory
Name Specification Use Status
1) HOUSING DRG NO ADSH8034010 LF NO 7440207148[74]() Specification : HOUSING DRG NO ADSH8034010 LF NO 7440207148 C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) BUMPER ASSY.[90]() Specification : BUMPER ASSY. (CONSISTING OF THREE DRAWINGS) DRG. NO. 620-01-3110-1/F C Nonestab
2) U BOLT FRONT[90]() Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3 C Nonestab
3) COVER ASSY. RHS (A.C. SYSTEM)[90]() Specification : COVER ASSY. RHS (A.C. SYSTEM) DRG. NO. 620-01-6010-1/B C Nonestab
4) COVER ASSY. LHS (A.C. SYSTEM)[90]() Specification : COVER ASSY. LHS (A.C. SYSTEM) DRG. NO. 620-01-6020-1/B C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]() Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) KEY RING WITH PLATE[90]() Specification : KEY RING WITH PLATE KEY RING WITH PLATE DRG.NO.VFJ/16/09/00001(V1) C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) LPTA Key Ring with Plate[90]() Specification : KEY RING WITH PLATE FOR LPTA C Nonestab
Category :
Grade : Grade III
Size : S
1) Vehicle Factory Jabalpur
Name Specification Use Status
1) HOSE ASSY[90]() Specification : HOSE ASSY C Nonestab
2) BRACKET FOR AXLE LAMP[90]() Specification : AS PER COMPONENT DRG. C Nonestab
3) FRONT TOE PIN ASSY[90]() Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1 C Nonestab
4) END BKT[90]() Specification : END BKT PT NO.X7184510-B.1 C Nonestab
Category :
Grade : Grade III
Size : S
1274 UNITED COMPOSHEETS PRIVATE LIMITED
KH NO. 122/16/2, 1ST FLOOR SANT NAGAR VILLAGE BURARI Delhi
PIN1 : 110084
Phone No. : 2675388
GSTIN : 09AAACU4787D1Z4 		MRTU00062G

Download 		1) Ordnance Factory Muradnagar
Name Specification Use Status
1) WASHER TO DRG NO 219 35 186 TRACK T 90 L F NO 6120100106[61]() Specification : WASHER TO DRAWING NUMBER 219.35.186 {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 19903-74,GOST 1577-93,GOST 14959-79,520 TY 1 PROCESS SHEETS-COLD STAMPING, ISOTHERMAL HARDENING. C Nonestab
2) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]() Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED] C Nonestab
3) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
4) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 [W/O SURFACE TREATED. C Nonestab
5) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
6) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED]. C Nonestab
7) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED). C Nonestab
8) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED]. C Nonestab
9) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
10) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
11) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
12) PROTECTING RING ASSEMBLY L F NO 6220900611[62]() Specification : PROTECTING RING ASSEMBLY WITHOUT SURFACE COATING TO DRG. NO. 1460D. R.NO. 9 DTD. 03-11-17 {NOTE:- TO COVER UP ASSEMBLY REJECTION ITEM NO.4 SHOULD BE SUPPLIED 5% EXTRA} [DRG. ENCLOSED]. C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) LONG BUSHING T 72 TRACK L F NO 6230901107[62]() Specification : LONG BUSHING TO DRG.NO.613.44.059,TECHNICAL REQUIREMENT AS PER SPEC.NO.OFM/TDS/TRACK-72/01. C Nonestab
2) MEDIUM BUSHING T 72 L F NO 6230901108[62]() Specification : MEDIUM BUSHING TO DRG. NO.613.44.060, TECHNICAL REQUIREMENTS AS PER SPEC. NO. OFM/TDS/TRACK-72/01. C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) DETONATOR HOLDER 1000 LBS MCD L F NO 6220900700[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED C Nonestab
2) DET HOLDER MCD 450 KG 250 KG L F NO 6230901204[62]() Specification : DETONETOR HOLDER [MCD] [WITHOUT SURFACE TREATED TO DRG. NO.ARDE 9501-01 DET - 9. [DRG. ENCLOSED C Nonestab
3) DETONETOR HOLDER MCD FOR 450 KG HSLD BOMB BODY L F NO 6230901206[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
4) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
5) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
6) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
7) PLUG MCD SURFACE TREATED 450 KG L F NO 6231101105[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
8) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED] C Nonestab
9) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
10) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED]. C Estab
11) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
12) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
13) RING NUT MCD 450 KG L F NO 6230900904[62]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Muradnagar
Name Specification Use Status
1) TRACK LINK DRG NO 172 55 012 TRACK T 90 ITEM CODE 6120100128[61]() Specification : TRACK LINK TO DRAWING NO. 172.55.012.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRAWING NO 172.55.012/F(HVF)AND TECHNICAL REQUIREMENTS GOST 4543-71, GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
2) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]() Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS C Nonestab
3) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]() Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S C Nonestab
4) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]() Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS C Nonestab
Category : ddp
Grade : 3
Size : S
1275 Sekar Auto And Engineering Components India Pvt Ltd
7/110 A.C.PUDUR VAIYAMPALAYAM VIA COIMBATORE Tamilnadu
PIN1 : 641110
Phone No. : 0422264427
GSTIN : 33AAKCS7161F1ZB 		CMBS09644F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) CELL ASSEMBLY TO 6201218015[62]() Specification : CELL ASSEMBLY TO DRG. NO. 177.18.001SBSB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) 1ST SHIELD ASSY TO 6201004036[62]() Specification : 1ST SHIELD ASSY TO DRG NO. 184.04.047CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) THIRD RIGHT HAND SHIELD ASSY TO 6201004020[62]() Specification : THIRD RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.017CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 4TH UPPER RIGHT HAND TO 6206803038[62]() Specification : SHIELD 4TH UPPER RIGHT HAND TO DRG NO. 172.04.161CB-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 2ND UPPER LEFT HAND TO 6206803017[62]() Specification : SHIELD 2ND UPPER LEFT HAND TO DRG NO. 172.04.131CB-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD THIRD LEFT HAND TO 6206803011[62]() Specification : SHIELD THIRD LEFT HAND TO DRG NO. 172.04.101CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 1ST UPPER RIGHT HAND TO 6206803025[62]() Specification : SHIELD 1ST UPPER RIGHT HAND TO DRG NO. 172.04.145CB-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 2ND LEFT HAND TO 6206803031[62]() Specification : SHIELD 2ND LEFT HAND TO 172.04.153CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FOURTH LEFT HAND SHIELD ASSY TO 6206803041[62]() Specification : FOURTH LEFT HAND SHIELD ASSY TO DRG NO. 172.04.167CB-2CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) 2ND RIGHT HAND SHIELD ASSY TO 6201004038[62]() Specification : 2ND RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.049CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) THIRD LEFT HAND SHIELD ASSY TO 6201004019[62]() Specification : THIRD LEFT HAND SHIELD ASSY TO DRG NO. 184.04.016CBCB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 3RD UPPER LEFT HAND TO 6206803013[62]() Specification : SHIELD 3RD UPPER LEFT HAND TO DRG NO. 172.04.106CB-2 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 3RD UPPER RIGHT HAND TO 6206803014[62]() Specification : SHIELD 3RD UPPER RIGHT HAND TO DRG NO. 172.04.107CB-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 4TH UPPER LEFT HAND TO 6206803037[62]() Specification : SHIELD 4TH UPPER LEFT HAND TO DRG NO. 172.04.160CB-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 2ND UPPER RIGHT HAND TO 6206803018[62]() Specification : SHIELD 2ND UPPER RIGHT HAND TO DRG NO. 172.04.132CB-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD SECOND RH TO 6206803032[62]() Specification : SHIELD SECOND RH TO DRG NO. 172.04.154CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 1ST UPPER LEFT HAND TO 6206803024[62]() Specification : SHIELD 1ST UPPER LEFT HAND TO DRG NO. 172.04.144CB-A C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD TO 6206803044[62]() Specification : SHIELD TO DRG NO. 172.04.170CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FIRST SHIELD ASSY TO 6206803029[62]() Specification : FIRST SHIELD ASSY TO DRG NO. 172.04.149CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 3RD RIGHT HAND TO 6206803012[62]() Specification : SHIELD 3RD RIGHT HAND TO DRG NO. 172.04.102CB-1 C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) 2ND LEFT HAND SHIELD ASSY TO 6201004037[62]() Specification : 2ND LEFT HAND SHIELD ASSY TO DRG NO.184.04.048CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD ASSY TO 6206803045[62]() Specification : SHIELD ASSY TO DRG NO. 172.04.185CB C Nonestab
Category :
Grade : Grade III
Size : S
1) Heavy Vehicle Factory
Name Specification Use Status
1) FOURTH RIGHT HAND SHIELD ASSY TO 6206803023[62]() Specification : FOURTH RIGHT HAND SHIELD ASSY TO DRG NO. 172.04.138CB-1CB C Nonestab
Category :
Grade : Grade III
Size : S
1276 Ultra Engineers
Ultra Engineers, Sector No. 10, Plot no. 58 PCNTDA, Bhosari Pune Maharashtra
PIN1 : 411026
Phone No. : 66313600
GSTIN : 27AASPB3588Q1ZS 		AASPB3588Q

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD THIRD LEFT HAND TO 6206803011[62]() Specification : SHIELD THIRD LEFT HAND TO DRG NO. 172.04.101CB-1 C Nonestab
2) SHIELD 2ND UPPER LEFT HAND TO 6206803017[62]() Specification : SHIELD 2ND UPPER LEFT HAND TO DRG NO. 172.04.131CB-A C Nonestab
3) SHIELD 2ND UPPER RIGHT HAND TO 6206803018[62]() Specification : SHIELD 2ND UPPER RIGHT HAND TO DRG NO. 172.04.132CB-A C Nonestab
4) SHIELD 4TH UPPER LEFT HAND TO 6206803037[62]() Specification : SHIELD 4TH UPPER LEFT HAND TO DRG NO. 172.04.160CB-A C Nonestab
5) SHIELD 1ST UPPER LEFT HAND TO 6206803024[62]() Specification : SHIELD 1ST UPPER LEFT HAND TO DRG NO. 172.04.144CB-A C Nonestab
6) SHIELD TO 6206803044[62]() Specification : SHIELD TO DRG NO. 172.04.170CB C Nonestab
7) SHIELD 3RD UPPER RIGHT HAND TO 6206803014[62]() Specification : SHIELD 3RD UPPER RIGHT HAND TO DRG NO. 172.04.107CB-A C Nonestab
8) FIRST SHIELD ASSY TO 6206803029[62]() Specification : FIRST SHIELD ASSY TO DRG NO. 172.04.149CB-1 C Nonestab
9) SHIELD 3RD UPPER LEFT HAND TO 6206803013[62]() Specification : SHIELD 3RD UPPER LEFT HAND TO DRG NO. 172.04.106CB-2 C Nonestab
10) SHIELD 3RD RIGHT HAND TO 6206803012[62]() Specification : SHIELD 3RD RIGHT HAND TO DRG NO. 172.04.102CB-1 C Nonestab
11) SHIELD 4TH UPPER RIGHT HAND TO 6206803038[62]() Specification : SHIELD 4TH UPPER RIGHT HAND TO DRG NO. 172.04.161CB-A C Nonestab
12) 1ST SHIELD ASSY TO 6201004036[62]() Specification : 1ST SHIELD ASSY TO DRG NO. 184.04.047CB-1CB C Nonestab
13) THIRD LEFT HAND SHIELD ASSY TO 6201004019[62]() Specification : THIRD LEFT HAND SHIELD ASSY TO DRG NO. 184.04.016CBCB C Nonestab
14) THIRD RIGHT HAND SHIELD ASSY TO 6201004020[62]() Specification : THIRD RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.017CBCB C Nonestab
15) 2ND LEFT HAND SHIELD ASSY TO 6201004037[62]() Specification : 2ND LEFT HAND SHIELD ASSY TO DRG NO.184.04.048CB-1CB C Nonestab
16) 2ND RIGHT HAND SHIELD ASSY TO 6201004038[62]() Specification : 2ND RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.049CB-1CB C Nonestab
17) SHIELD ASSY TO 6206803045[62]() Specification : SHIELD ASSY TO DRG NO. 172.04.185CB C Nonestab
18) FOURTH LEFT HAND SHIELD ASSY TO 6206803041[62]() Specification : FOURTH LEFT HAND SHIELD ASSY TO DRG NO. 172.04.167CB-2CB C Nonestab
19) FOURTH RIGHT HAND SHIELD ASSY TO 6206803023[62]() Specification : FOURTH RIGHT HAND SHIELD ASSY TO DRG NO. 172.04.138CB-1CB C Nonestab
Category :
Grade : Grade III
Size : L
1277 TECHNOCUBE
RS NO 1926, BEHIND PARMAR PETROL PUMP, RAMNAGAR, SHIYE KOLHAPUR Maharashtra
PIN1 : 416122
Phone No. : 2954747
GSTIN : 27AALFT0926F1Z5 		KLPT02912A

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHAFT TO 6206102096[62]() Specification : SHAFT TO DRG NO. 166.29.305CB C Nonestab
Category :
Grade : Grade III
Size : S
1278 GMT INDUSTRIES LIMITED
PLOT NO. 51, SECTOR-68, IMT FARIDABAD Haryana
PIN1 : 121004
Phone No. : 7017749395
GSTIN : 06AADCG3582F1ZQ 		AADCG3582F

Download 		1) Heavy Vehicle Factory
Name Specification Use Status
1) SHIELD 2ND LEFT HAND TO 6206803031[62]() Specification : SHIELD 2ND LEFT HAND TO 172.04.153CB-1 C Nonestab
2) SHIELD 1ST UPPER RIGHT HAND TO 6206803025[62]() Specification : SHIELD 1ST UPPER RIGHT HAND TO DRG NO. 172.04.145CB-A C Nonestab
3) SHIELD THIRD LEFT HAND TO 6206803011[62]() Specification : SHIELD THIRD LEFT HAND TO DRG NO. 172.04.101CB-1 C Nonestab
4) SHIELD 2ND UPPER LEFT HAND TO 6206803017[62]() Specification : SHIELD 2ND UPPER LEFT HAND TO DRG NO. 172.04.131CB-A C Nonestab
5) SHIELD SECOND RH TO 6206803032[62]() Specification : SHIELD SECOND RH TO DRG NO. 172.04.154CB-1 C Nonestab
6) SHIELD 2ND UPPER RIGHT HAND TO 6206803018[62]() Specification : SHIELD 2ND UPPER RIGHT HAND TO DRG NO. 172.04.132CB-A C Nonestab
7) SHIELD 4TH UPPER LEFT HAND TO 6206803037[62]() Specification : SHIELD 4TH UPPER LEFT HAND TO DRG NO. 172.04.160CB-A C Nonestab
8) SHIELD 1ST UPPER LEFT HAND TO 6206803024[62]() Specification : SHIELD 1ST UPPER LEFT HAND TO DRG NO. 172.04.144CB-A C Nonestab
9) SHIELD TO 6206803044[62]() Specification : SHIELD TO DRG NO. 172.04.170CB C Nonestab
10) SHIELD 3RD UPPER RIGHT HAND TO 6206803014[62]() Specification : SHIELD 3RD UPPER RIGHT HAND TO DRG NO. 172.04.107CB-A C Nonestab
11) SHIELD 3RD UPPER LEFT HAND TO 6206803013[62]() Specification : SHIELD 3RD UPPER LEFT HAND TO DRG NO. 172.04.106CB-2 C Nonestab
12) SHIELD 3RD RIGHT HAND TO 6206803012[62]() Specification : SHIELD 3RD RIGHT HAND TO DRG NO. 172.04.102CB-1 C Nonestab
13) SHIELD 4TH UPPER RIGHT HAND TO 6206803038[62]() Specification : SHIELD 4TH UPPER RIGHT HAND TO DRG NO. 172.04.161CB-A C Nonestab
14) 1ST SHIELD ASSY TO 6201004036[62]() Specification : 1ST SHIELD ASSY TO DRG NO. 184.04.047CB-1CB C Nonestab
15) THIRD LEFT HAND SHIELD ASSY TO 6201004019[62]() Specification : THIRD LEFT HAND SHIELD ASSY TO DRG NO. 184.04.016CBCB C Nonestab
16) THIRD RIGHT HAND SHIELD ASSY TO 6201004020[62]() Specification : THIRD RIGHT HAND SHIELD ASSY TO DRG NO. 184.04.017CBCB C Nonestab
17) 2ND LEFT HAND SHIELD ASSY TO 6201004037[62]() Specification : 2ND LEFT HAND SHIELD ASSY TO DRG NO.184.04.048CB-1CB C Nonestab
18) SHIELD ASSY TO 6206803045[62]() Specification : SHIELD ASSY TO DRG NO. 172.04.185CB C Nonestab
19) FOURTH LEFT HAND SHIELD ASSY TO 6206803041[62]() Specification : FOURTH LEFT HAND SHIELD ASSY TO DRG NO. 172.04.167CB-2CB C Nonestab
20) FOURTH RIGHT HAND SHIELD ASSY TO 6206803023[62]() Specification : FOURTH RIGHT HAND SHIELD ASSY TO DRG NO. 172.04.138CB-1CB C Nonestab
Category :
Grade : Grade III
Size : M
1279 Apollo computing laboratories pvt ltd
A11,Electronics complex,Kushaiguda,Hyderabad-500062 TELANGANA HYDERABAD Telangana
PIN1 : 500062
Phone No. : 9963478423 		AABCA7253R

Download 		1) Ordnance Factory Chanda

[Deemed Registration]
Name Specification Use Status
1) 6191700201 ADM EMPTY ASSEMBLY FOR SAM GPRS TO DRG NO 17020010000100000D AS PER QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA Description : 6191700201 ADM EMPTY ASSEMBLY FOR SAM GPRS TO DRG NO 17020010000100000D AS PER QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA() Specification : QAP NO ARDE SAM GP ADM 02 FOR SAM GPRS FOR GUIDED PINAKA C Nonestab
Category : p
Grade : 3
Size : S
1280 NAV BHARAT INDUSTRIES
2, CLIVE GHAT STREET, SAGAR ESTATE, GROUND FLOOR, ROOM NO - 7, 2, CLIVE GHAT STREET, KOLKATA West Bengal
PIN1 : 700001
Phone No. : 22307356 		AARPH7421D

Download 		1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS STRIP LF 0717560694 Description : BRASS STRIP LF 0717560694() Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED). R Nonestab
2) ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032 Description : ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032() Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 23MM BS2874 CZ115 M LF 0711500023 Description : BRASS ROD 23MM BS2874 CZ115 M LF 0711500023() Specification : BRASS ROD 23 +0.05/-0.10 MM DIA IN LENGTH OF 1.5 TO 2 METRE TO SPECN.BS:2874-1986 CZ-115 M R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) WIRE LEAD ANT 5 66TO 5 74MM JSS9530 LF 0811200005 Description : WIRE LEAD ANT 5 66TO 5 74MM JSS9530 LF 0811200005() Specification : LEAD ANTIMONY ALLOY WIRE 5.66 MM TO 5.74 MM DIA WITH 1.8 TO 2.2%ANTIMONEY TO SPECN:JSS-9530-02-1996(REV.NO.2)(REAFFIRMED-2008)(PbSb-2). MATERIAL TO BE SUPPLIED IN REEL FORM, EACH WEIGHING 45 TO 50 KGS. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) STEEL ROD 3 125MM IS 4431 14C14S14 LF 0112001004 Description : STEEL ROD 3 125MM IS 4431 14C14S14 LF 0112001004() Specification : STEEL ROD 3.125+/-0.05MM DIA IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS TO SPECN.IS:4431-1978 REAFFIRMED 2004 GRADE 14C14S14 INCOLD DRAWN CONDITION. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Al alloy rod 35mm ENAW7075 T6 LF 0611505135 Description : Al alloy rod 35mm ENAW7075 T6 LF 0611505135() Specification : Al alloy rod 35+/- 0.3mm in std. length of 2.0 to 3.0 meter to specification EN AW 7075-T6 R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020 Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020() Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652 R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 8 5 MM LF 0711906011 Description : BRASS ROD 8 5 MM LF 0711906011() Specification : TO SPECN:IS-319-2007 REVISION NO.5 (REAFFIRMED -2017) GRADE 1 IN HALF HARD CONDITION R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005 Description : LEAD PIG ORDINARY 500X100X70MM IS27 LF 0801573005() Specification : LEAD PIG ORDINARY (FLAT) 500 MM LONG X 100 MM WIDE X 70 MM THICK IN WEIGHT OF 30KG,Pb-99.99% TO SPECN.IS-27-1992(FOURTH REVISION)(REAFFIRMED 2014)(AMENDMENT NO1 APRIL 1998)(AMENDMENT NO2 DECEMBER 2010). R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004 Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004() Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans R Nonestab
Category : p
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 11MM BS2874 CZ122 M LF 0712203011 Description : BRASS ROD 11MM BS2874 CZ122 M LF 0712203011() Specification : BRASS ROD 11+/- 0.10 MM DIA IN LENGTH OF 2 METRES MIN SPECN BS -2874 -1986, CZ-114 M OR CZ 122M. R Nonestab
Category : ddp
Grade : 3
Size : S
1) Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 8MM BS2874 CZ122 M LF 0712100008 Description : BRASS ROD 8MM BS2874 CZ122 M LF 0712100008() Specification : BRASS ROD 8MM BS2874 CZ122 'M' R Nonestab
Category : p
Grade : 3
Size : S
1281 KISAAN STEELS PVT. LTD.
B-12, INDUSTRIAL AREA, BULANDSHAHAR ROAD, GHAZIABAD UTTAR PRADESH
PIN1 : 201001
Phone No. : 91-120-4175900-20, 2700812, 2700899
GSTIN : 09AAACK5948C1ZJ 		MRTK00149C

Download 		1) Heavy Alloys Penetrator Project
Name Specification Use Status
1) STEEL ROD FROM 100MM DIA TO 500MM DIA IN MULTIPLE LENGTH() EN8/ASTM 106 GR.B R Not Estab.
2) FLANGES FROM 25MM TO 150MM DIA() ------ C Not Estab.
3) STEEL RINGS UP TO 150MM DIA() ------ C Not Estab.
Category : P
Grade : II
Size : S