1) PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
Description : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.()
Specification : PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Post Aiming MG MK 3 DS CAT No 1290x000258
Description : Post Aiming MG MK 3 DS CAT No 1290x000258()
Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition
Specification : SPRING LOCK AS PER DRG.NO.CQA (I)-393/23,CAT/PT.NO.-5340-014213 for devicd firing IB ()
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Ring Retaining CQAI 39332[70]()
Specification : RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.5 6X30MM DRG NO. 0204-03-03-02-15-000-00DB
C
Nonestab
2) HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW[70]()
Specification : HAND GUARD ASSEMBLY FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-00-08-000-00DC CONSISTING OF HAND GUARD MOULDING, INSERT HAND GUARD, REFLECTOR, HAMMER DRIVE SCREW
C
Nonestab
3) Cocking Handle Moulding for JVPC Consisting of Insert Cocking Handle[70]()
Specification : Cocking Handle Moulding for JVPC 5.56 X 30MM Drg No. 0204-03-03-01-14-000-00DB Consisting of Insert Cocking Handle
C
Nonestab
4) PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'[70]()
Specification : PISTOL GRIP MOULDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-19-31-000-00DG CONSISTING OF INSERT 'A' INSERT 'B', INSERT 'C',INSERT 'D'
C
Nonestab
5) BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER[70]()
Specification : BODY HOUSING UPPER WELDING FOR JVPC 5.56 X 30MM DRG NO. SK-5729*CONSISTING OF BODY HOUSING UPPER, CHANNEL LEFT, CHANNEL RIGHT, TUBE SPACER
C
Nonestab
6) BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER[70]()
Specification : BARREL COVER ASSEMBLY FOR JVPC 5.56 X 30MM DRG. NO. 0204-03-03-01-12-000-00DA CONSISTING OF BARREL COVER MOULDING BUSH BARREL COVER
C
Nonestab
7) LEVER LOCK GAS CYLINDER WELDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-13-000-00DB CONSISTING OF LEVER LOCKING GAS CYLINDER, PIN LEVER LOCKING GAS CYLINDER[70]()
Specification : LEVER LOCK GAS CYLINDER WELDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-13-000-00DB CONSISTING OF LEVER LOCKING GAS CYLINDER, PIN LEVER LOCKING GAS CYLINDER
C
Nonestab
8) BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB[70]()
Specification : BUFFER FOR JVPC 5.56 X 30MM DRG NO. 0204-03-02-03-22-005-00DB
C
Nonestab
9) SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA[70]()
Specification : SPRING PLUNGER BUTT ARM FOR JVPC DRG.NO.0204-03-02-03-22-001-00DA
C
Nonestab
10) SPRING HOD FOR JVPC DRG.NO.0204-03-02-00-01-008-00XA[70]()
Specification : SPRING HOD FOR JVPC DRG.NO.0204-03-02-00-01-008-00XA
C
Nonestab
11) SPRING COCKING HANDLE FOR JVPC DRG.NO.0204-03-02-00-01-009-00XA[70]()
Specification : SPRING COCKING HANDLE FOR JVPC DRG.NO.0204-03-02-00-01-009-00XA
C
Nonestab
12) BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA[70]()
Specification : BAYONET FOR JVPC 5.56 X 30MM DRG.NO. 0204 04 02 00 00 000 00DA
1) Magazine Assy with NI PTFE Coated for JVPC[70]()
Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-03-02-15-000-00DC
C
Nonestab
2) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]()
Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) HOUSING TRIGGER OF LMG BELT FED[70]()
Specification : HOUSING TRIGGER OF LMG 7.62MM BELT FED,DRG NO.SK-5817.
C
Nonestab
2) AMMUNITION POUCH FOR LMG[72]()
Specification : AMMUNITION POUCH FOR LMG 7. 62 MM BELT FED . AS PER DRG.NO.1804 03 00 00 00 000 00DA.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) AMMN.CONTAINER BOX C-44A(STEEL)()
DRG.NO.CQA(A)AMN/2644 PART NO.ISV-530A,DC:37249-A,DT.08.3.10SPECN:IA-1169(n),DC NO:35576-A,PAINTED"OLIVE GREEN"ISC NO:220 OF IS:5-2007(6TH REVISION) RE AFFIRMED-2012.
C
Not Estab
Category : P
Grade : III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) LID CORNER PIECE FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
2) BRACKET CARTG. REAR FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
3) HANDLE & HANDLE CLIP ASSLY/1466A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
4) BRACKET B-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
5) ENGAGING PLATE FOR BOX H2A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
6) HANDLE & HANDLE CLIP ASSLY/1564 ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
7) BRACKET A-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
8) BRACKET FOR AMMN. BOX SM-601-C()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
9) BOTTOM SUPPORT PIECE BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
10) CATCH PLATE (WITHOUT ASSLY) ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
11) BRACKET B-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
12) BRACKET CARTG. FRONT BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
13) CHANNEL FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
14) PIECE PACKING FOR BOX SM-601-C ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
15) PIECE PACKING - A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
16) PIECE PACKING - B ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
17) CARRYING LINK DRG. OFB/C/1540A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
18) BRACKET A-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
19) CENTER PARTITION FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
20) BRACKET END FOR SHELL BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
21) LID CORNER PIECE FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
22) BRACKET CARTG. REAR FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
23) HANDLE & HANDLE CLIP ASSLY/1466A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
24) BRACKET B-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
25) ENGAGING PLATE FOR BOX H2A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
26) HANDLE & HANDLE CLIP ASSLY/1564 ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
27) BRACKET A-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
28) BRACKET FOR AMMN. BOX SM-601-C()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
29) BOTTOM SUPPORT PIECE BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
30) CATCH PLATE (WITHOUT ASSLY) ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
31) BRACKET B-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
32) BRACKET CARTG. FRONT BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
33) CHANNEL FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
34) PIECE PACKING FOR BOX SM-601-C ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
35) PIECE PACKING - A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
36) PIECE PACKING - B ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
37) CARRYING LINK DRG. OFB/C/1540A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
38) BRACKET A-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
39) CENTER PARTITION FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
40) BRACKET END FOR SHELL BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
Category : DP
Grade : III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) LID CORNER PIECE FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
2) BRACKET CARTG. REAR FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
3) HANDLE & HANDLE CLIP ASSLY/1466A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
4) BRACKET B-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
5) ENGAGING PLATE FOR BOX H2A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
6) HANDLE & HANDLE CLIP ASSLY/1564 ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
7) BRACKET A-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
8) BRACKET FOR AMMN. BOX SM-601-C()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
9) BOTTOM SUPPORT PIECE BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
10) CATCH PLATE (WITHOUT ASSLY) ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
11) BRACKET B-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
12) BRACKET CARTG. FRONT BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
13) CHANNEL FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
14) PIECE PACKING FOR BOX SM-601-C ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
15) PIECE PACKING - A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
16) PIECE PACKING - B ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
17) CARRYING LINK DRG. OFB/C/1540A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
18) BRACKET A-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
19) CENTER PARTITION FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
20) BRACKET END FOR SHELL BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
21) LID CORNER PIECE FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
22) BRACKET CARTG. REAR FOR BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
23) HANDLE & HANDLE CLIP ASSLY/1466A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
24) BRACKET B-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
25) ENGAGING PLATE FOR BOX H2A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
26) HANDLE & HANDLE CLIP ASSLY/1564 ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
27) BRACKET A-2 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
28) BRACKET FOR AMMN. BOX SM-601-C()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
29) BOTTOM SUPPORT PIECE BOX C-53A()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
30) CATCH PLATE (WITHOUT ASSLY) ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
31) BRACKET B-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
32) BRACKET CARTG. FRONT BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
33) CHANNEL FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
34) PIECE PACKING FOR BOX SM-601-C ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
35) PIECE PACKING - A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
36) PIECE PACKING - B ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
37) CARRYING LINK DRG. OFB/C/1540A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
38) BRACKET A-1 FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
39) CENTER PARTITION FOR BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
40) BRACKET END FOR SHELL BOX C-53A ETC.()
AS PER DRAWING/SPECIFICATION.
R
ESTAB.
Category : DP
Grade : III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()
Specification : BLANK FOR BODY COVER DRG.NO.SKM-902*1 . MATERIAL- AL.FORG.TO DRG. SKM-174* TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Stem Roller[70]()
Specification : As per Drawing
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Block Gas in finish condition for MAG[70]()
Specification : Block Gas in finish condition as per D. S. CAT No. 1005-006815 for MAG 7.62mm (Bore Size Dia 23.021 to 23.037mm)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Trigger guard[70]()
Specification : AS PER DRG. DS CAT No. 1005-00060
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Blank of Receiver Plate[01]()
Specification : Steel Blank of Receiver Plate Left & Right to Drg. SKM-960*
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SPRING AS PER DRAWING NO SK 6517 TE[70]()
Specification : SPRING AS PER DRAWING NO SK 6517 TE
C
Nonestab
2) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
3) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
4) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN LOCKING CUP AND PISTOL GRIP FOR JVPC[70]()
Specification : PIN LOCKING CUP AND PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-02-00-11-001-00DB
C
Nonestab
2) PIN LOCKING HAND GUARD FOR JVPC[70]()
Specification : PIN LOCKING HAND GUARD FOR JVPC 5.56MM DRG.NO.0204 03-02-00-13-001-00DB
Specification : ROD CLEANING SMALL ARMS TO DRG. NO. CQA(SA)SK-464, DS CAT NO . 1005-560440 CONSISTING OF EIGHT COMPONENTS. DC(I) NO. 2636 4-SA,DT. 01-08-07.
Specification : TOOL REMOVING RUPTURED CARTRIDGE CASE TO DRGNO.ARDE/TA/94/12 IN FINISHED CONDITION. DS CAT NO-4933-000405DC(1) 26519-SA,DT.08-07-10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
2) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
3) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BOX MAGAZINE
Description : BOX MAGAZINE()
Specification : BOX MAGAZINE 5.56MM LMG(25 NOS.)AS PER DRG. NO.CQA(SA)-146 TO DS CAT NO.1005-560034. DC (I) NO. 26412-SA DT. 15.04.08
C
Estab
2) CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION
Description : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION()
Specification : CASE ASSY OF 9MM MAGAZINE IN FINISHED CONDITION AS PER DRG DS CAT NO. 1005-000970 (INCLUDING COMPONENT PLATE BACK 1005-000971, PLATE FRONT 1005-000972, PLATE SIDE L/H 1005-000973, PLATE SIDE R/H 1005-000974, STOP 1005-000975 DC (I) 25681
C
Estab
3) RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM
Description : RIVET SOLID FOR CHANNEL RIGHT FOR INSAS 5.56 MM()
Specification : AS PER DRG.
C
Estab
4) WASHER KEY FOR MAG
Description : WASHER KEY FOR MAG()
1) TRADE ASSISTANCE FOR MOULDING OPERATION ALONG WITH THE SUPPLY OF RUBBER COMPOUNDFOR SOLE AND HEEL OF DIFFERENT SIZES OF BOOT HIGH ANKLE DVS IMPROVED VERSION[21]()
Specification : IND/TC/3844 & IND/TC/3838(K)
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) RE-INFORCED RUBBER TUBING PETROL RESISTANT 5 MM I/D X 11 MM O/D IN MULTIPLE LENGTH OF 1.07 MTRS.[21]()
Specification : IS: 635-1982
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhusawal
Name
Specification
Use
Status
1) RUBBER STUD FOR CARRIER 13A & CARRIER 16A()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
2) RUBBER GASKET FOR BOX H2A & BOX H5A()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
3) CAPCELL OF ALL SIZES()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
4) ALL TYPES OF RUBBER ITEMS AS PER DRAWING()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
5) RUBBER STUD FOR CARRIER 13A & CARRIER 16A()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
6) RUBBER GASKET FOR BOX H2A & BOX H5A()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
7) CAPCELL OF ALL SIZES()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
8) ALL TYPES OF RUBBER ITEMS AS PER DRAWING()
AS PER O.F.BHUSAWAL REQUIRED DRAWING/SPECIFICATION
R
ESTAB.
Category : DDP,DP
Grade : II
Size :
S
1) Grey Iron Foundry
Name
Specification
Use
Status
1) Rubber Stud 13A()
As per Drg. & specification
C
Not Established
Category : DP
Grade : I,II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) SHEET RUBBER EXPANDED TO SPECN. IND/ME/645 TYPE B SIZE 914.4 MM WIDE X 8 MM THICK()
IND/ME/645
R
Not Estab.
2) RUBBER SLUGS FOR CARTG 12 BORE ANTIRIOT TO DRG NO AFK/SK-2675 SHEET NO.1()
DRG NO AFK/SK-2675 SHEET NO.1
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Protective ring for copper band for 105mm HE,COL.,SMK.,ILLG.()
as per Drg. No. SK-8337/A
C
Not Estab.
2) Protective ring for copper band()
as per Drg. No. SK-7844/A
C
Not Estab.
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) THREE WAY ROOF POLE MILD STEEL JOINT[21]()
Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) THREE WAY ROOF POLE MILD STEEL JOINT[21]()
Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Nonestab
2) FOUR WAY MILD STEEL JOINT[21]()
Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Nonestab
3) THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]()
Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Equipment Factory
Name
Specification
Use
Status
1) THREE WAY ROOF POLE MILD STEEL JOINT[21]()
Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Estab
2) FOUR WAY MILD STEEL JOINT[21]()
Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Estab
3) THREE WAY MILD STEEL JOINT WITH BASE PLATE[21]()
Specification : PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015
R
Estab
4) STUD RUBBER TO DRG. PT. NO. 1656 ISV (OEF DRAWING NO. SK-938)[21]()
Specification : OEF DRAWING NO. SK-938
R
Estab
5) RUBBER STUD ROUND BLACK[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
6) D Ring 19 mm Nickel Plated x 10.5 mm x 2 mm dia (For Pouches Ammun.)[21]()
Specification : As per Drg. No.- SK-860
R
Estab
7) PIN TENT ANGLE IRON MED. MK-2[21]()
Specification : CQA(GS)/US/428 (5877/PK), CADMIUM PLATED AS PER IS:1572-1986
R
Estab
8) TENT RING IG 12.5 MM[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
9) RUBBER COMPOUND FOR SOLE & HEEL[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
10) RUBBER ADHESIVE[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
11) FABRICATION OF RUBBER COMPOUND FOR SOLE & HEEL FOR BOOT ANKLE LEATHER DVS,NO MATERIAL WILL BE PROVIDED BY THE FACTORY. ALL REQUIRED MATERIALS FOR FABRICATION[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.[00]()
Specification : PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) THREAD PROTECTOR TO OFAJ.DRG.NO.SM-952[00]()
Specification : THREAD PROTECTOR TO OFAJ.DRG.NO.SM 952
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) PROTECTIVE RING FOR BASE END THREAD
Description : PROTECTIVE RING FOR BASE END THREAD()
Specification : PROTECTIVE RING FOR BASE END THREADING AS PER DRG. NO. SK-8071/A MATERIAL NITRILE/ NEOPRENE SYNTHETIC RUBBER GREEN COLOURED SULPHERLESS
P
Estab
2) PROTECTIVE RING BANDS SK 7723 1 A
Description : PROTECTIVE RING BANDS SK 7723 1 A()
Specification : PROTECTIVE RING BANDS SK 7723-1 -A
P
Estab
3) PROTECTIVE RING BANDS SK 7723 A
Description : PROTECTIVE RING BANDS SK 7723 A()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
C
Nonestab
2) STUD[90]()
Specification : STUD M 14X 1.5, PART NO. X3711915 A
Specification : WASHER 22 MM. WASHER 22 MM. DRG./PART NO.F-4930240 REF DRG F 4931140 D
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) NIC CROME PLATED RING SPA24X27[90]()
Specification : CROME PLATED RING SPANNER 24X27 MM EVEREST/TAAPARIA/GEDORE/J HALANI/JHALANI EXPERT/JK/BETA/AMBIKA TOOLS/VENUS MAKE AS PER -IS:2029-1998-A-SERIES-C MADE OF CHROME VANADIUM STEEL. PART NO.X4701111-V2.
C
Nonestab
2) STUD[90]()
Specification : STUD M 14X 1.5, PART NO. X3711915 A
1) ALU ALLOY ROD 26.50MM IS733 24345WP (0611505027)[06]()
Specification : ALUMINIUM ALLOY ROD 26.5 (+/-0.20) MM DIA IN STRAIGHT LENGTH 2.0 TO 3 MTR.TO SPECN. IS-733-1983 (3rd Rev) (REFFIRMED-2006) GRADE-24345 IN WP CONDITION OR BS:1474-1987 GRADE-2014A IN T6 CONDITION & CONFIRMING ELASTIC LIMIT-275 MPa Min. UTS-
R
Estab
2) ALU ALLOY ROD 31.75MM IS733 64430 W (0611503032)[06]()
Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 W CONDITION
R
Estab
3) ALU ALLOY ROD 65MM IS733 GR24345 WP (0611503065)[06]()
Specification : ALUMINIUM ALLOY ROD 65(+/-0.53) MM DIA IN LENGTH OF 1.0 TO 1.5 MTRS TO SPECN.IS:733-1983(3rd REVISION)(REAFFIRMED 2006)DESIG.24345 AND CONDITION "WP".
R
Estab
4) ALU ALLOY ROD 28.50MM BS1474 2014A (0619500029)[06]()
Specification : ALUMINIMUM ALLOY ROD 28.50 +/-0.3MM DIA IN STRAIGHT LENGTH OF 2 TO 3 MTRS. SPECN. BS-1474-1987 DESIG.2014-A "T4"OR IS:733-1983 DESIGNATION 24345 "W" CONDITION.
R
Estab
Category : P
Grade : III
Size :
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) ALUMINIUM ADAPTOR FORGING()
AS PER DRG. NO- SK-7545/B
C
Not Estab.
Category : DDP
Grade : III
Size :
L
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) ALLUMINIUM ROD 90MM X 155MM LONG FOR MUZZLE ATTACHMENT BARREL OF 12 BORE PUMP ACTION GUN.[70]()
Specification : MATERIAL:-DTD 5124/AA7075
R
Nonestab
2) ALLUMINIUM ROD 40MM X 145MM LONG FOR BARREL SLEEVE MUZZLE ATTACHMENT OF 12 BORE PUMP ACTION GUN.[70]()
Specification : MATERIAL:-DTD 5124/AA7075
R
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Gun and Shell Factory
Name
Specification
Use
Status
1) 84mm TPT PROJECTILE BODY TO GSF DRG. NO M-11229 IN FINISH MACHINED CONDITION[61]()
Specification : AS PER DRG.
C
Nonestab
Category : p
Grade : Grade II
Size :
L
1) Ordnance Factory Dumdum
Name
Specification
Use
Status
1) FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION[62]()
Specification : FORGED BLANK FOR FIN BODY TO OFAJ DRG NO F571 F WITH MATL ALUMINIUM ALLOY B 95 TO GOST 4784 74 OR ALTERNATIVELY DTD 5024 IN W P CONDITION
R
Estab
Category : ddp
Grade : Grade II
Size :
L
1448
Ravindra Trading Company
22, Muthial Reddy Street, Alandur, CHENNAI TAMIL NADU
PIN1 : 600016
Phone No. : 044 65632780 GSTIN : 33ALGPS5068R1ZA
1) AL BRONZE 100MM DIA BAR BP AZHMTS TO 0737600100
Description : AL BRONZE 100MM DIA BAR BP AZHMTS TO 0737600100()
Specification : GOST:1628(100MM)
R
Nonestab
2) AL BRONZE 12MM DIA GR BRAZH MTS 10 3 1 5 GOST 1628 78 EXTRUDED DRAWN ROUND TO 0737600012
Description : AL BRONZE 12MM DIA GR BRAZH MTS 10 3 1 5 GOST 1628 78 EXTRUDED DRAWN ROUND TO 0737600012()
Specification : GOST:18175-78(12MM)
R
Estab
3) ALU BRONZE 66MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600066
Description : ALU BRONZE 66MM DIA GR BRAZHMTS 10 3 1 5 EXTRUDED AND DRAWN ROUND TO 0737600066()
Specification : GOST:18175-78(66MM)
R
Estab
4) BLOCK bP AZHMTS 10 3 1 5 GOST 18175 72 TO 3996412057
Description : BLOCK bP AZHMTS 10 3 1 5 GOST 18175 72 TO 3996412057()
Specification : SPECIFICATION :-
WIDTH---------------------13 MM +/-1
WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX.
B.S. IN NEWTON------------1800-N MIN.
THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2
TEX OF YARN---WARP----52, WEFT------23.9.
NO.OF ENDS---
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE ELASTIC 25 MM HEAVY DUTY U/D[2101786943]()
Specification : SPECN. NO. Best Trade Quality
R
Nonestab
2) TAPE ELASTIC 50 MM HEAVY DUTY QUALITY 5030 ASH COLOUR[2101786864]()
1) POLYPROPYLENE ROPE 12 MM DIA SPECIAL GRADE (BS 2030 KG) YELLOW[2101630012]()
Specification : Specification No. : IS : 5175-1992.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE NYLON 66 26 MM BS 550 KGF[2101786993]()
Specification : ADRDE/Specn/2000/54(d)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE NYLON 13 MM U D 182 KG[2101786982]()
Specification : ADRDE/QMS/TDTM/SPECN/94
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) 100% POLY. TAPE 25MM (ROLL LENGTH 100M EXCLUDING SAMPLE)[2101797674]()
Specification : 1 Width(mm) 25 mm. Appendix B of IS:3846:1984
2 Mass(gm/mt.) 12(max). Appendix C of IS:3846:1984
3 Ends(in full/width) 85+4/-0. IS:1963
4 Picks/cm. 20+2/-0 (total picks based on two thread working as one) IS:1963
5 Breaking load
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) TAPE NYLON 20 MM UNDYED (BS=1350 KG) MINIMUM[2101776059]()
2) WEBBING NYLON 44 MM 2950 KG STEEL GREY[2101877120]()
Specification : SPECN. IS:4727-1968 Type -1 Except that :-
1) 180 picks/dm +/- 5% (2 picks/shed)
2) No. of folds in weft yarn-1
R
Nonestab
3) CORD NYLON 1785 N B L WHITE[2101116225]()
Specification : SPECN NO:JSS:4020-9-2013, ( Required Roll Length 337 M excluding test sample ) Except that:- in appearance and all other respects not defined in this specn, the material shall conform to the sealed sample held in the costody the controlle
R
Nonestab
4) Tape Nylon 2point6 cm OG BS 1200 Kg[2101797030]()
Specification : Specification - ADRDE/SPECN/66
R
Nonestab
5) WEBBING NYLON 44 MM OG 815 KG[2101877081]()
Specification : IS 4727 : 1968 Except For :-
Parameters Specified (Revised)
Page 4, Table 1, picks/dm:140+-5%
Vty. No.2 (2picks/shed)
No of f
R
Nonestab
6) WEBBING NYLON 44 MM UD 17800N[2101876974]()
Specification : IS:4727-1968 except for :-
i) Parameters Specification
Page 4, Table picks/dm:140+- 5%
1, Vty. No. 2 No of folds in weft
yarn- 1
iii) Sampling Plan & Criteria of conformity shal
R
Nonestab
7) Tape Nylon 2 54 cm 1 0 UD BS 250 Kg[2101786989]()
Specification : ADRDE/Specn/64
R
Nonestab
8) Tape Nylon 15 mm BS 185 KG UD[2101221372]()
Specification : The Tape shall be in continuous length of 110 M (Excluding Sampling) Without Any Flag Otherwise That Roll Be Treated As Short Length.
ADRDE/QMS/TGTE/T/2019/02 Date: 10/05/2019
R
Nonestab
9) Tape Nylon Tubular Braided 20 mm BS 5680N BS[2101787005]()
1) STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.[44]()
Specification : STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Metal and Steel Factory
Name
Specification
Use
Status
1) M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND FITTED WITH BOSS -03 NOS IN EACH PLATE . [20]()
Specification : "M.S. STARTER PLATE SIZE - 20 MM X 1000 MM X 1200 MM AS PER MSF DRG NO - ESR/1000/03 . FULLY MACHINED AS PER DRAWING AND
FITTED WITH BOSS -03 NOS IN EACH PLATE . "
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Metal and Steel Factory
Name
Specification
Use
Status
1) COLD ROLLED STEEL STRIP 2.2(+/-0.1) MM THICK X 90(+/-2) MM WIDE X 1000 MM LONG TO SPECN IS:1570-79 GRADE:40 C8, TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.[01]()
Specification : COLD ROLLED STEEL STRIP 2.2(+/-0.1) MM THICK X 90(+/-2) MM WIDE X 1000 MM LONG TO SPECN IS:1570-79 GRADE:40 C8, TO BE SUPPLIED IN RUST FREE & BRIGHT ANNEALED CONDITION IN POLYTHENE PACKS.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1460
Anant Defence Systems Pvt. Ltd.
Gala No.4, S. No. 17/1B, Pragati Industrial Complex, Behind Joshi Railway Museum, Kothrud, Pune 411038 Kothrud Pune Maharashtra
PIN1 : 411038
Phone No. : 25442006
1) 9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5502 C REF DRG NO 5360 040481
Description : 9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5502 C REF DRG NO 5360 040481()
Specification : 9080080877 SPRING HELICAL COMPRESSION TO DRG NO GCF-MN-5502 (C) (REF DRG NO 5360-040481)
C
Estab
2) 9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5501 C REF DRG NO 5360 040480
Description : 9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5501 C REF DRG NO 5360 040480()
Specification : 9080080878 SPRING HELICAL COMPRESSION TO DRG NO GCF MN 5501(C) REF DRG NO 5360-040480
C
Estab
Category : p
Grade : 3
Size :
S
1) Engine Factory Avadi
[ENR Registration]
Name
Specification
Use
Status
1) FUEL PUMP BODY CASTING
Description : FUEL PUMP BODY CASTING()
Specification : FUEL PUMP BODY TO DRG NO. 3327-20-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Engine Factory Avadi
[ENR Registration]
Name
Specification
Use
Status
1) FUEL PUMP BODY V92S2
Description : FUEL PUMP BODY V92S2()
Specification : FUEL PUMP BODY to DRG.NO: 3327-20-19 (AS PER VQC, QC CRITERIA, DRAWINGS & SPECIFICATIONS)
