1) CLAMPING BUCKLE FOR SADDLE STRAP Cat/Part No.: 14/5420-000152[2010990466]()
Specification : DRAWING NO.: IMPD-0947
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) BUCKLE BRASS NO 50[2111252051]()
Specification : SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) PULLY RTU.[2110026012]()
Specification : DRG. NO.ADRDE/1041A-2/SA-1
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) TOWING RING 20MM ID[2110025023]()
Specification : DRG.NO.ADRDE/1402-02-002.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) NIV TRIANGULAR D RING[2010020005]()
Specification : DRAWING NO. CQA(GS)/US/560
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) SLIDING BAR BUCKLE DS CAT NO 1670 000123[2110040026]()
Specification : DRAWING NO. : JSS 1670-05 : 2013
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK QUICK EJECTOR FOR PTAM[2110069098]()
Specification : ADRDE/1210(c)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]()
Specification : DRAWING NO. CQA(GS)/US/562
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) DISCONNECT LOCK WITH BUCKLE[2110019013]()
Specification : DRG.NO.ADRDE/1355.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) BUCKLE PACK OUTER(PTRM)[2102062825]()
Specification : SPECN.NO.IND/GS/1795
C
Nonestab
2) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]()
Specification : DRAWING NO. CQA(GS)/US/562
C
Nonestab
3) BUCKLE D SHAPED (PTR-M)[2102053921]()
Specification : SPECN.NO.IND/GS/1798
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) A4/5340-006721 BUCKLE WAIST ADJUSTABLE ADOPTER (SLIDING BAR TYPE) PTRM[2102064015]()
Specification : SPECN.NO.IND/GS/1802
C
Nonestab
2) BUCKLE PACK OUTER(PTRM)[2102062825]()
Specification : SPECN.NO.IND/GS/1795
C
Nonestab
3) NIV BUCKLE V SHAPED WITH SLIDING BAR[2010020006]()
Specification : DRAWING NO. CQA(GS)/US/562
C
Nonestab
4) BUCKLE D SHAPED (PTR-M)[2102053921]()
Specification : SPECN.NO.IND/GS/1798
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) BUCKLE BRASS NO 50[2111252051]()
Specification : SPECN. NO. IS:4274 (TABLE 10. NOMINAL SIZE-51) THE THICKNESS OF BRASS BUCKLE SHALL BE MINIMUM 3 MM & IT SHALL BE AS PER IS:410 (BRASS SHEET)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) D RING OF ROD THICKNESS 8 MM[9911037675]()
Specification : Stainless Steel AISI Grade 316 As per Drawing OPF/G.C./2019 D Ring
R
Nonestab
2) BRASS EYELET 28 MM WITH WASHER[9911037674]()
Specification : Best trade quality
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]()
Specification : DRAWING NO JSS: 5340-05:2014
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) HOLDING BUCKLE[2110071002]()
Specification : DRG.NO.:ADRDE/1297 ( b )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) LAP STRAP ADJUSTABLE BUCKLE (FOR PILOT PARA JAGUAR A/C.)[2110075021]()
Specification : SPCN.AS PER ADRDE/1456.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) GROMMET WITH WASHER 11mm[2110060007]()
Specification : SPECIFICATION :DRAWING NO ADRDE/306(a)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) MODIFIED COIL SPRING[2110005001]()
Specification : SPECN-ADRDE/271(b)
NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) SHACKLE WITH NUT AND BOLT BLACK[2110077022]()
Specification : DRG. NO. ADRDE/ 1348-G (b)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) SNAP HOOK STATIC LINE PTR-M WITH SAFETY PIN[2110017018]()
Specification : SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INLET ASSY[74]()
Specification : INLET ASSY (View) AS PER DRG.080780A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
2) ADAPTOR MAGAZINE[74]()
Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
3) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPRING FLAT[74]()
Specification : SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
2) WRENCH[74]()
Specification : WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
3) SLIDER LINKS M9 WELDMENT[74]()
Specification : SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
C
Nonestab
4) WASHER LOCK TAB M4[74]()
Specification : WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
5) BLOCK STORAGE WELDED[74]()
Specification : BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CENTERING[74]()
Specification : BOLT, CENTERING (View)020054A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
2) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
3) WASHER SPHERICAL[74]()
Specification : WASHER SPHERICAL (View) AS PER DRG.064414A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
4) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
5) INSERT M4 ALTERED ITEM[74]()
Specification : INSERT M4, ALTERED ITEM (View)AS PER DRG 031682A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
6) BOLT GEAR TRAVERSE[74]()
Specification : BOLT GEAR, TRAVERSE (View)AS PER DRG 031669A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
7) BELLEVILLE LEVER TRAVERSE[74]()
Specification : BELLEVILLE, LEVER TRAVERSE (View)AS PER DRG 062346A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
8) BASE STOP B[74]()
Specification : BASE STOP B (View)AS PER DRG 019895A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
9) SCREW SPRING INTERFACE[74]()
Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1484
PROTECH TEXTILES AND TRIMS PRIVATE LIMITED
A2, PLOT NO. 2-5, KIRTI DEEP BUILDING BUSINESS RETAILS CENTRE NANGAL RAYA DELHI Delhi
PIN1 : 110046
Phone No. : 9818693402 GSTIN :
06AAECM0720G1ZZ
1) CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856[90]()
Specification : CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
C
Nonestab
2) CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869[90]()
Specification : CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
1) Three Layer water proof breathable fabric Dual shade OG White 118 cm width[21]()
Specification : As per Appendix 'A' of Prov. Specification No. IND/TC/4587(d) and amendment No.1 As per CQA (T&C)/PMS/35 d except that fabric will be supplied roll form only as per CQA (T&C) Kanpur QAI No. CQA(T&C)/QAI/99 TC-11
1) CORRUGATED PAPER CARTON TO OFAJ DRG NO FS 1061 G FOR HEADHE PRACTICE
Description : CORRUGATED PAPER CARTON TO OFAJ DRG NO FS 1061 G FOR HEADHE PRACTICE()
Specification : CORRUGATED PAPER CARTON TO OFAJ DRG.NO. FS-1061 G FOR HEADHE / PRACTICE.
E
Estab
2) CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K
Description : CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K()
Specification : CORRUGATED FIBERBOARD PACKING CARTON TO OFAJ DRG NO CC 235K
E
Estab
3) PACKING CARTON TO OFAJ DRG NO FS 987 C FOR HEAD SPIGOT
Description : PACKING CARTON TO OFAJ DRG NO FS 987 C FOR HEAD SPIGOT()
Specification : PACKING CARTON TO OFAJ DRG. NO. FS-987 C FOR HEAD SPIGOT
E
Estab
4) CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO FS 2395D FOR ILLU BASE
Description : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO FS 2395D FOR ILLU BASE()
Specification : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2395D FOR ILLU BASE
E
Estab
5) CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO CC 333 E
Description : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO CC 333 E()
Specification : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. CC-333 E
E
Estab
6) PACKING CARTON FOR 84 MM TPT TO OFAJ DRG NO FS 2367 E
Description : PACKING CARTON FOR 84 MM TPT TO OFAJ DRG NO FS 2367 E()
Specification : PACKING CARTON FOR 84 MM TPT TO OFAJ DRG.NO. FS-2367 E.
E
Estab
7) CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRAWING NO FS 2376 E FOR ST TUBE
Description : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRAWING NO FS 2376 E FOR ST TUBE()
Specification : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO. FS-2376 E FOR ST TUBE.
E
Estab
8) FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG NO FS 2385 G FOR GUV 7
Description : FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG NO FS 2385 G FOR GUV 7()
Specification : FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG.NO.FS-2385 G FOR GUV7.
E
Estab
9) PACKING CARTON TO OFAJ DRG NO FS 835 E FOR MOTOR TUBE
Description : PACKING CARTON TO OFAJ DRG NO FS 835 E FOR MOTOR TUBE()
Specification : PACKING CARTON TO OFAJ DRG. NO. FS-835 E FOR MOTOR TUBE
E
Estab
10) CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO FS 2388 E FOR FUZE 162
Description : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG NO FS 2388 E FOR FUZE 162()
Specification : CORRUGATED FIBRE BOARD PACKING CARTON TO OFAJ DRG.NO. FS-2388 E FOR 162.
E
Estab
11) CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO FS 2377E FOR ILLU SHELL BODY
Description : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO FS 2377E FOR ILLU SHELL BODY()
Specification : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO. FS-2377E FOR ILLU. SHELL BODY.
E
Estab
12) CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO FS 2494B
Description : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG NO FS 2494B()
Specification : CORRUGATED FIBREBOARD PACKING CARTON TO OFAJ DRG. NO.FS-2494B
E
Estab
13) PACKING CARTON TO OFAJ DRG NO FS 986 E FOR FIN ASSLY
Description : PACKING CARTON TO OFAJ DRG NO FS 986 E FOR FIN ASSLY()
Specification : PACKING CARTON TO OFAJ DRG. NO. FS-986E FOR FIN ASSLY.
Specification : ORRUGATED CARD BOARD SHEET EACH SET CONSISTS OF (A) PACKING SHEET VIII HEMRL/ED/DRG.NO.003 DET.NO.1 SZ-470MM X180MM X10M M TH.8NOS/SET.(B)PKG.SHEET IX DET.NO.2 SZ-160MM X170MM X20MM THK.4NOS/SET.(C)PKG.SHEET X DET.NO.5 SZ-90MM X140MM X32M
R
Estab
Category : p
Grade : 3
Size :
S
1Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) BOX PKG CORRUG.DRG.NO.AFK/SK-2582-2()
Specification : DRG NO AFK/SK-2582 SHEET NO 1
R
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CORRUGATED PACKING BOX TO SIZE L 13 W 13 H 11 INCHES AND SHEET THICKNESS 120 GSM BOX SHALL BE HAVING 4 COMPARTMENTS INSIDE OF EQUAL SIZE BOX MUST SUSTAIN LOAD OF MIN 10 KGS[00]()
Specification : NO
E
Estab
Category : ddp
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG NO FS 2385 G FOR GUV 7
Description : FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG NO FS 2385 G FOR GUV 7()
Specification : FIBRE BOARD PACKING CARTON WITH FITMENT TO DRG.NO.FS-2385 G FOR GUV7.
E
Estab
2) FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2375H FOR TAIL UNIT
Description : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2375H FOR TAIL UNIT()
Specification : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2375H FOR TAIL UNIT.
E
Estab
3) FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2379G FOR TRACER BODY
Description : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG NO FS 2379G FOR TRACER BODY()
Specification : FIBREBOARD PACKING CARTON WITH FITMENTS TO OFAJ DRG.NO. FS-2379G FOR TRACER BODY.
E
Estab
Category : ddp
Grade : 1
Size :
S
1491
Shivswati Enterprises Private Limited
A 2/18, Site V, Kasna Industrial Area, Greater Noida-201310
Uttar Pradesh A 2/18, Site V, Kasna Industrial Area, Greater Noida-201310 Uttar Pradesh Greater Noida Uttar Pradesh
PIN1 : 201310
Phone No. : 9811004270 GSTIN :
09AAACC3857G1ZN
Specification : PROVISIONAL SPECIFICATION NO. PROV/S/2599/TC-11/2009/02 AS PER RELEVANT CLAUSE OF SPECIFICATION.
R
Nonestab
6) FABRIC TWILL WEAVE POLY.& COTTON (67:33) DISRUPTIVE PATT. WR 290GSM 150 cm WIDTH(MIN)WITH INDIAN ARMY LOGO[21]()
Specification : PROV.SPECIFICATION No. PROV/S/2599/TC-11/2009/01, EXCEPT THAT CLAUSE NO. 6.1 &6.2 WHICH SHALL BE SUITABLE YARN COUNT MAY BE USED IN WARP &WEFT IN 3/1 TWILLWEAVE TO MEET THE FUNCTIONAL & OTHER CONSTRUCTIONAL PARAMETERS ALONGWITH L& FINISH &
R
Nonestab
7) FABRIC TWILL WEAVE COTTON AND POLYESTER (80:20) DISRUPTIVE PATTERN WATER REPELLENT 250 GSM 150 cm WIDTH (MINIMUM) WITH INDIAN ARMY LOGO.[21]()
Specification : SPECN NO. PROV/S/2599/TC-
11/2009/03,EXCEPT THAT CLAUSE No.8.5
WHICH SHALL BE"AS PER DRAWING PLATE
No.OCFS/CAPFS/ARMYLOGO"AND CLAUSE
No.16.1 WHICH SHALL BE AS PER SCHEDULE
No.CQA(T&C)/PMS/35(d), EXCEPT THAT THE
FABRIC SHALL BE SUPPLI
Specification : TYPE 2 OF IS 2970-1987 (RE AFFIRMED 2004) FIRST REVISION EXCEPT TECHNICAL PARTICULARS AS PER ANNEXURE ENCLOSED.
R
Estab
2) FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE)[2101221228]()
Specification : Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other
respects not defined in this specification,the material
Specification : AS PER PARTICULAR =WIDTH=94 CM
A.P.35+_5 Cuft/Sqft/Sec at 10"WHP
Weight/Sq.Metre=115-117 Gram
Thread /cm-Warp-28,WEft-25
Tex of Yarn
Tex x Fold-Warp-9.4x2,Weft-9.
Specification : Specn.-IS:2422-1985 Dye fastness to light may be obtained by Carbon arc method also in case Xenon arc is not available. (a)In appearance shade finish and all other respects not defined in this specification, the material shall confor
Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading
Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the
custody of controller CQAT&C Kanpur and in addition the
R
Estab
4) FABRIC NY.109 gms UD/DYED 122CM FOR PARA BOMB105MM[9911035223]()
Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading
Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the
custody of controller CQAT&C Kanpur and in addition the
R
Estab
6) FABRIC NY.109 gms UD/DYED 122CM FOR PARA BOMB105MM[9911035223]()
Specification : SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading
Specification : SPCN: ADRDE/SPECN/1980/5(a)In appearance, workmanship, feel, finish and others respects not defined in the specification the material shall conform to the sealed pattern held in the
custody of controller CQAT&C Kanpur and in addition the
R
Estab
18) FABRIC NY.109 gms UD/DYED 122CM FOR PARA BOMB105MM[9911035223]()
1) PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FREE FM.VISIBLE[20]()
Specification : PHOSPHATING CHEMICAL FOR STEEL ITEMS WITH SPECN.AS FOLLOWS: BATH CONC.% 5 TO 10,TOTAL ACID TITRATION/BATH POINT 25 TO 40 IMMERSION TIME:15 TO 20 MINS.AT 85 TO 90 DEG.C BATH,COATING WT.: 800 TO 1000 Mg/Sq.Ft.,Sp.Gr.1.4TO1.44.COLOURLESS,FRE
S
Nonestab
2) PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:7697-37-2) I[10]()
Specification : PHOSPHATING CHEMICAL HAVING BATH COCENTRATION 2.5-3%(V/V), ACID TITRATION SHOULD BE 19 TO 21 MLS AND DIP POINT 10 TO 15 (MIN) AT TEMP 70-75 DEG.C. INGREDIENT ARE ZINC OXIDE(CAS:1314-13-2), PHOSPHORIC ACID(CAS:7664-38-2) & NITRIC ACID(CAS:
S
Nonestab
3) DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT IN HDPE JARRY[10]()
Specification : DERUSTING CHEMICAL HAVING BATH COCENTRATION 30-35%(V/V), ACID TITRATION SHOULD BE 30 TO 35 MLS AND DIP TIME 20-30 MIN AT TEMP 60-70 DEG.C. MAIN INGREDIENT ARE PHOSPHORIC ACID(CAS: 7664-38-2), SULPHURIC ACID(CAS:7664:93-9) AND SURFACTANT I
S
Nonestab
4) SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CAS:497-19-8)[10]()
Specification : SPRAY DEGREASING CHEMICAL FOR STEEL CARTG. CASE WITH SPECN. AS FOLLOW: BATH CONCENTRATION 3-5%(W/V) POINT TITRATION 45-65 MLS AND CONTACT TIME 3-5 MIN WITH TEMP 70-80 DEG.C. MAIN INGREDIENT ARE CAUSTIC SODA(CAS:1310-73-2) AND SODA ASH (CA
S
Nonestab
5) SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)[10]()
Specification : SAPONIFICATION FOR STEEL CARTG. CASE. BATH COCENTRATION 0.5-3.0%(W/V), DIP TIME 3-5 MINS AT TEMP 70-90 DEG.C MAIN INGREDIENT IS OCTADECANOIC ACID SODIUM SLT(CAS: 822-16-2)
1) 6334402200 SET A FOR HDC II CONSISTING OF
Description : 6334402200 SET A FOR HDC II CONSISTING OF()
Specification : SET`A'CONSISTING OF: A) CASING (SUB-ASSLY) TO DRG.NO.HEMRL/SK/ 1173 DET.NO.2 QTY:1 NO, (B)BOOSTER HOLDER TO DRG.NO.HEMRL/SK/1173 DET.NO.6 QTY:1 NO,(C)SCREW TO DRG.HEMRL/SK/1173 DET.NO. 8 QTY:4 NOS,(D)CAP FOR BOOSTER HOLDER DRG.HEMRL/SK/11
