1) MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
2) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
3) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
2) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Estab
Category :
Grade : Grade III
Size :
S
1Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BARREL BLANK ()
DRG.NO.SK-01394
C
Estab.
2) CYLINDER SUB ASSY.()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
3) SEMI FINISH BARREL (MK-III TITAN)()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
4) CYLINDER (MK-III TITAN)()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
5) BODY FINISH (TITAN)()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
Category : DDP
Grade : I,II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Estab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()
Specification : AS PER DRG No.TEND :2509 (for K-1202)
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).[70]()
Specification : AS PER DRG. NO. TEND 1692* (ICR 1576)
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Estab
2) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Estab
3) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()
Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Estab
2) AUTO SEAR BLANK FOR ASSAULT RIFLE ( L.F.No.7024002517)[70]()
Specification : As per Drg. No.TEND 2517 (for K 2067)
C
Estab
3) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Estab
4) CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Estab
5) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL
E
Estab
6) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL
C
Estab
7) CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Estab
8) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Estab
9) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Estab
10) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()
Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL
C
Estab
11) SUPPLY OF DISCONNECTOR AS PER DRG NO.K-2065 WITHFRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-2065 WITHFRMS MATERIAL
C
Estab
12) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Estab
2) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Estab
2) TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Estab
3) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Estab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Estab
5) SUPPLY OF REAR SIGHT LEAF[70]()
Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
3) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Nonestab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CARRIER BREECH BLOCK TO DS CAT NO 1005 001578 TO DC NO 26762 SA DATED 11 06 2015 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1268[70]()
Specification : AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()
Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325[70]()
Specification : INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1463
PUSHPA ENGINEERING
SR NO 11/1 SHANTINAGARLANDEWADI BHOSARI PUNE-39 MAHRASTRA PUNE Maharashtra
PIN1 : 411039
Phone No. : 9657755233 GSTIN :
27ADOPV1931G1Z8
1) PIN DETENT SPRING TO CQA A DRG NO 13046 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : PIN DETENT SPRING TO CQA(A) DRG. NO. 13046-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002
R
Nonestab
2) SCREW DETONATOR RETAINING TO CQA A DRG NO 13154 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : SCREW DETONATOR RETAINING TO CQA (A) DRG. NO. 13154-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
R
Nonestab
3) SHAFT ROTOR ALTERNATOR TO CQA A DRG NO 13048 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : SHAFT ROTOR ALTERNATOR TO CQA (A) DRG.NO.13048-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
C
Nonestab
4) PENION NO 2 TO CQA A DRG NO 13015 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : PENION NO.2 TO CQA (A) DRG NO. 13015-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
C
Nonestab
5) PIN CONNECTING TO CAT SECTION CAT PART NO 14 5315 001704 AND DRG CAT NO 23705[00]()
Specification : PIN CONNECTING TO CAT SECTION CAT/PART NO 14/5315-001704 AND DRG/ CAT NO 23705
C
Nonestab
6) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]()
Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]()
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
Specification : FORGING FOR PIN, DRG. No. PS-0932111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) WHEEL BOLT M 22[90]()
Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C
C
Nonestab
2) BOLT M10 70[90]()
Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) U BOLT FRONT[90]()
Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3
C
Nonestab
2) COLLAR TYPE HEX HEAD BOLT[90]()
Specification : COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9
C
Nonestab
3) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]()
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
6) BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8[90]()
Specification : BOLT M12 X 1.5 X 125 PART NO.L1011225.IS:1364-92 PT-I P-8.8
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SA OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING[90]()
Specification : S/A OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING
C
Nonestab
2) FRONT TOE PIN ASSY[90]()
Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1
C
Nonestab
3) SHACKLE PIN[90]()
Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3
C
Nonestab
4) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
5) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
2) LPTA SPRING PIN[90]()
Specification : SPRING PIN DRG.NO.352.322.0530
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
2) LPTA SPRING SHACKLE PIN[90]()
Specification : SPRING (SHACKLE) PIN DRG.NO.352.325.0530
C
Nonestab
3) LPTA SPRING PIN[90]()
Specification : SPRING PIN DRG.NO.352.322.0530
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) T BOLT CLAMP[90]()
Specification : T BOLT CLAMP (79DIA), PART NO. X-3900310
C
Nonestab
2) SHACKLE PIN[90]()
Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3
C
Nonestab
3) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
4) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030114 MS PLATE SIZE 6MM[01]()
Specification : IS 2062-1994
C
Nonestab
2) 0133030109 MS PLATE SIZE 25MM[01]()
Specification : IS 2062-1994
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6121000194 CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5[61]()
Specification : CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432300008 MS PLATE 3MM TH PHOS ERA[64]()
Specification : IS:2062-1994
C
Nonestab
2) 0133030116 MS PLATE SIZE 1200 MM[01]()
Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333800330 PLUG WITH FILAMENT BRIDGE BUSHING[63]()
Specification : PLUG TO DRG. PART NO. IQX 975 & BUSHING TO DRG. PART NO.IQX 976 TO DESIGNERS REF. OST-B 84-409-79.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030112 MS PLATE SIZE 1100[01]()
Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
2) 0133030115 MS PLATE SIZE 400[01]()
Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
3) 0133030113 MS PLATE SIZE 450 MM[01]()
Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330901200 SADDLE ASSLY TO DRG NO HE CAST 021 DET 1 CONSISTING OF 4 COMPONENTS TO DRG NO HE CAST 021 DET 2 TO 4 AND ALLEN SCREWS M5 X 5 AND QAP NO HEMRL HE ADD 08 01 REV00 OF 09 2008[63]()
Specification : SADDLE ASSLY TO DRG.NO.HE/CAST 021 DET 1 CONSISTING OF 4COMPONENTS TO DRG. NO. HE/CAST 021 DET 2 TO 4 & ALLEN SCREWS M5 X 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.
C
Nonestab
2) 6330901100 DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 5 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET. 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
3) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) RING WITH PIN TO 6206109011[62]()
Specification : RING WITH PIN TO DRG NO. 434.11.006CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) PAPER WHITE FINE AMMN SPECN JSS[14]()
Specification : SPECN.: JSS - 9310 - 06 :2016 REV.1 SIZE :508 MM X 762 MM IN S/O 84 TO 92 GSM. D S CAT NO.9310-000 013."
P
Nonestab
2) PAPER FOR CARTG CASES AMMUNITION IN REELS OF[14]()
Specification : "PAPER FOR CARTG.CASES AMMUNITION IN REELS OF 387.4MM WIDE 457.2MM X 508 MM DIA IN CRIMSON COLOUR TO SPECN. JSS 8135- 09-2004.(REV NO.2)"
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Set of 5 Components Upper Set for 51mm Illg. [62]()
Specification : ARDE-2064
C
Nonestab
2) DELAY TUBE FOR 51MM ILLG[62]()
Specification : DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d)
C
Nonestab
3) Pin Locking for 51mm Illg. [62]()
Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 SPECN.CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG. 1A[62]()
Specification : CQA(A) 2328
C
Nonestab
2) SPRING TO DRG NO ARDE 2064.[62]()
Specification : DRG.NO. ARDE 2064 (DET NO 7) PT NO ITV 225 SPECN. CQA(A) 2328 (d)
C
Nonestab
3) CUP FOR BOMB 51MM ILLG.[62]()
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF PLYWOOD PACKING FITMENTS FOR BOX C 43 A[65]()
Specification : DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) DISC FOR BOMB 51MM PACKING[62]()
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
Specification : SPECN.CQA(A) 2324(i) DRG.NO.CQA(A)/AMN/2906 PT.NO.ITV-26 SA
C
Nonestab
6) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG[62]()
Specification : DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSY. FOR SHELL 84 mm Illg[62]()
Specification : F-1301-902340(C)
C
Nonestab
2) TAIL UNIT 2A FOR MORTAR BOMB 120 MM ILLG.[63]()
Specification : CQA(A) 2342[DRG.NO. CIA/AMN/1397,PART NO. ITV 11 A
C
Nonestab
3) RING FOR 120MM ILLG.[63]()
Specification : SPECN. IS:1570C 40 DRG. NO. ARDE 2011, DET 24 PART NO. ITV-152
C
Nonestab
4) BOTTOM PLATE WITH SWIVEL FOR 84 MM[62]()
Specification : DRG.NO.F-1301-054860 F SPECN.F 1301-903400 CLAUSE -3 & 6.
Specification : Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b)
C
Nonestab
2) Drinking Water Tank Drg No 640 01 1450 1 D[90]()
Specification : Drinking Water Tank Drg.No.640-01-1450-1/D
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Assy Water Tank Insulated 55 lt[90]()
Specification : ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]()
Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HANDLE ASSY 675 50 CB301[90]()
Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA ASSY BUMPER FRONT[90]()
Specification : ASSY BUMPER FRONT
C
Nonestab
2) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Nonestab
3) LPTA Assy Water Tank Insulated 55 lt[90]()
Specification : ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) 9010398122000 BUMPER ASSY AND DETAILS FOR UPGRADED MPV 4X4[90]()
Specification : DRG. 2725-57-31
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) VEHICLE IDENTIFICATION PLATE[90]()
Specification : VEHICLE IDENTIFICATION PLATE
C
Nonestab
2) TAIL PIPE[90]()
Specification : TAIL PIPE FN100415HASE.0
C
Nonestab
3) S A OF FUEL TANK RH 160 LITRE PART No B5028201 V2[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
4) S A OF FUEL TANK LH 160 LITRE PART No B5028202 V2[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
5) STEERING PIPE RETURN LINE B2238210[90]()
Specification : STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE.
C
Nonestab
6) STEERING PIPE RETURN LINE B2238211[90]()
Specification : STEERING PIPE RETURN LINE BS3 STEERING PIPE RETURN LINE B2238211(B.1)BSIII STALLION VEH.
1) SET OF KOD AND DEGREASING CAUSTIC FREE ALKALINE CLEANER TO BE USED IN 9 TANKS PROCESS BY SPRAY METHOD FOR POWDER COATING PLANT()
AS PER SPECIFICATION
R
ESTAB.
2) SET OF ACTIVATION, PASSIVATION & PHOSPHATING CHEMICALS TO BE USED IN 9 TANKS PROCESS TO GET CLASS-III (COATING NOT LESS THAN 1.6GM/M2 AS PER JSS-0465-01-1994 (LATEST ISSUE) FOR POWDER COATING PLANT()
AS PER SPECIFICATION
R
ESTAB.
3) SET OF KOD AND DEGREASING CAUSTIC FREE ALKALINE CLEANER TO BE USED IN 9 TANKS PROCESS BY SPRAY METHOD FOR POWDER COATING PLANT()
AS PER SPECIFICATION
R
ESTAB.
4) SET OF ACTIVATION, PASSIVATION & PHOSPHATING CHEMICALS TO BE USED IN 9 TANKS PROCESS TO GET CLASS-III (COATING NOT LESS THAN 1.6GM/M2 AS PER JSS-0465-01-1994 (LATEST ISSUE) FOR POWDER COATING PLANT()
AS PER SPECIFICATION
R
ESTAB.
Category : DP
Grade : I
Size :
M
1467
R K And Sons
209 /1 Amarsukh Near M K Hotel /
HDFC Bank Lane No 1 Sant Tukaram Nagar, New Sanghavi Lane no1 Pune Maharashtra
PIN1 : 411027
Phone No. : 9423583666
1) EOD COOLING SUIT
Description : EOD COOLING SUIT
as Authorised Dealer for M/s Holdfast Systems Pty Ltd., South Africa()
Specification : AS PER ENCLOSURE
R
Nonestab
2) EOD HELMET WITH COMMUNICATION SYSTEM
Description : EOD HELMET WITH COMMUNICATION SYSTEM
as Authorised Dealer for M/s Holdfast Systems Pty Ltd., South Africa()
K MAX TECHNOLOGIES PVT LTD
23F SIDCO INDUSTRIAL ESTATE NORTH PHASE AMBATTUR CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 9443063513 GSTIN :
33AACCK5808R1Z4
1) READY MIXED WHITE PAINT IS 168 1993 L F NO 1011308002[10]()
Specification : PAINT R.M. AIR DRYING SEMI GLOSSY FINISH WHITE BRUSHING TO = SPECN:IS:168-1993 SECOND REVISION WITH AMENDMENT NO 1&2 {AS APPLICABLE FOR DEFENCE USE.
P
Nonestab
2) PAINT TURQUOISE BLUE L F NO 1011308102[10]()
Specification : PAINT R.M.AIR DRYING MATT.BRUSHING TURQUOISE BLUE ISC.NO-102 OF IS-5-2007 TO SPECN.IS-168-1993 THIRD REVISION {AS APPLICABLE FOR DEFENCE USE}.FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE BY OFM
P
Nonestab
3) PAINT RMADS GL GREEN BRUNSWICK L F NO 1011312225[10]()
Specification : PAINT READY MIXED AIR DRYING SEMI GLOSSY FOR GENERAL PURPOSE GREEN BRUNSWICK LIGHT ISC-225 OF IS-5-2007 SPRAYING TO SPECN.IS-168-1993 (AS APPLICABLE FOR DEFENCE USE).
P
Nonestab
4) R M PAINT DEEP BRONZE GREEN L F NO 1011508224[10]()
Specification : READY MIXED PAINT AIR DRYING MATT.BRUSHING{ISC224 IS:5-2007 DEEP BRONZE GREEN}TO SPECN.IS-168-1993 [AS APPLICABLE FOR DEFENCE USE]. FIRM WILL SUPPLY MATERIAL IN STAGGER DELIEVERY SCHEDULE PROVIDED BY OFM
P
Nonestab
5) PAINT RMAD BUFF MIDDLE SPRAYIN L F NO 1011517359[10]()
Specification : PAINT R.M AIR DRYING SEMI GLOSSY FINISH ISC-359 OF IS-5 2007 BUFF MIDDLE SPRAYING TO SPECN IS-168-1993 [IIIrd REVISION ADDITIONAL REQUIREMENTS TO IS-168-1993 AS APPLICABLE FOR DEFENCE USE,VISCOSITY OF PAINT SHOULD BE SUITABLE FOR USE WIT
P
Nonestab
6) PAINT RED OXIDE IS 2074 1992 L F NO 1011700446[10]()
Specification : READY MIXED PAINT AIR DRYING RED OXIDE ZINC CHROME PRIMING TO SPECN.IS:2074-1992.
Specification : HINGE DRIVERS HATCH ASSY (FORGING)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FORGING FOR OUT PUT SHAFT FT[90]()
Specification : FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)
C
Nonestab
2) FORGING FOR L SHAFT STLN BS 3[90]()
Specification : FORG. FOR LAY SHAFT STLN- BS-III, PT.NO. F3320011-3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Forging for Coupling Flange RXL[90]()
Specification : Forging for Coupling Flange Part No 2730 3530 5001 3
C
Nonestab
2) LPTA Forging for Coupling Flange AGB[90]()
Specification : Forging for Coupling Flange DRG No 312 262 2045 3 (A)
C
Nonestab
3) LPTA Forging for Counter Shaft AGB[90]()
Specification : Forging for Counter Shaft Drg No 322 2830 102 50
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HINGE DRIVERS HATCH ASSY (FORGING)[90]()
Specification : HINGE DRIVERS HATCH ASSY (FORGING)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Forging for 4th Speed Gear on Counter Shaft[90]()
Specification : Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R)
C
Nonestab
2) LPTA Forging for Drive Shaft Front Axle[90]()
Specification : Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1
C
Nonestab
3) LPTA Forging for 4th Speed Gear on Main Shaft[90]()
Specification : Forg 4th Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5421 3
C
Nonestab
4) LPTA Forging for Drive Shaft[90]()
Specification : Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)
C
Nonestab
5) LPTA Forging for Steering Lever LH RH[90]()
Specification : Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50
C
Nonestab
6) LPTA Forging for Flange Axle Housing[90]()
Specification : Forging for Flange Axle Housing (Axle Housing) Drg No 2604 3510 5102 3 (R1)
C
Nonestab
7) LPTA Forging for Steering Arm BS III[90]()
Specification : Forging for Steering Arm BS-III, LPTA 715, Part No / Drg No 2154 3385 600 3
C
Nonestab
8) LPTA Forging for King Pin Lower[90]()
Specification : Foring for King Pin Lower 340 332 1306 3 (R2)
C
Nonestab
9) LPTA Forging for Shifter Sleeve AGB[90]()
Specification : Foring for Shifter Sleeve AGB Drg No 322 2820 123 R1
C
Nonestab
10) LPTA Forging for Over Drive Gear on Counter Shaft[90]()
Specification : Forg Over Drive Gear on Counter Shaft LPTA BS-III Vehicle Drg No 2691 2630 5414 3 (R1)
C
Nonestab
11) LPTA Forging for Rev Gear on Main Shaft[90]()
Specification : Reverse Gear M/S (Forging) Main Shaft LPTA 715 BS-III 2691 2620 5413 3
C
Nonestab
12) LPTA Forging for Cont Mesh Gear on Counter Shaft[90]()
Specification : Forging for Constant Mesh Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5413 3
C
Nonestab
13) LPTA Forging for King Pin Upper[90]()
Specification : Foring for King Pin Upper Part No 2574 3325 5102 3 R2
C
Nonestab
14) LPTA Forging for Main Shaft[90]()
Specification : Forging for Main Shaft BS-III LPTA 715 Part No 2691 2620 7911 3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FORGING FOR OUT PUT SHAFT FT[90]()
Specification : FORGING FOR OUT PUT SHAFT FRONT, DRG. NO.PS3344611(R2)
C
Nonestab
2) FORGING FOR L SHAFT STLN BS 3[90]()
Specification : FORG. FOR LAY SHAFT STLN- BS-III, PT.NO. F3320011-3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Forging for Coupling Flange RXL[90]()
Specification : Forging for Coupling Flange Part No 2730 3530 5001 3
C
Nonestab
2) LPTA Forging for Coupling Flange AGB[90]()
Specification : Forging for Coupling Flange DRG No 312 262 2045 3 (A)
C
Nonestab
3) LPTA Forging for Counter Shaft AGB[90]()
Specification : Forging for Counter Shaft Drg No 322 2830 102 50
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Forging for 4th Speed Gear on Counter Shaft[90]()
Specification : Forging for 4th Speed Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5428 3 (R)
C
Nonestab
2) LPTA Forging for Drive Shaft Front Axle[90]()
Specification : Foring for Drive Shaft Front Axle Drg No 322 283 0605 3 R1
C
Nonestab
3) LPTA Forging for 4th Speed Gear on Main Shaft[90]()
Specification : Forg 4th Speed Gear On Main Shaft LPTA BS-III Vehicle Drg No 2691 2620 5421 3
C
Nonestab
4) LPTA Forging for Drive Shaft[90]()
Specification : Forging for Drive Shaft Drg No 322 2820 301 50 ( R1)
C
Nonestab
5) LPTA Forging for Steering Lever LH RH[90]()
Specification : Forging for Steering Lever LH & RH Part No 312 338 1005- 50 Drg No 312 338 1005 50
C
Nonestab
6) LPTA Forging for Flange Axle Housing[90]()
Specification : Forging for Flange Axle Housing (Axle Housing) Drg No 2604 3510 5102 3 (R1)
C
Nonestab
7) LPTA Forging for Steering Arm BS III[90]()
Specification : Forging for Steering Arm BS-III, LPTA 715, Part No / Drg No 2154 3385 600 3
C
Nonestab
8) LPTA Forging for King Pin Lower[90]()
Specification : Foring for King Pin Lower 340 332 1306 3 (R2)
C
Nonestab
9) LPTA Forging for Shifter Sleeve AGB[90]()
Specification : Foring for Shifter Sleeve AGB Drg No 322 2820 123 R1
C
Nonestab
10) LPTA Forging for Over Drive Gear on Counter Shaft[90]()
Specification : Forg Over Drive Gear on Counter Shaft LPTA BS-III Vehicle Drg No 2691 2630 5414 3 (R1)
C
Nonestab
11) LPTA Forging for Rev Gear on Main Shaft[90]()
Specification : Reverse Gear M/S (Forging) Main Shaft LPTA 715 BS-III 2691 2620 5413 3
C
Nonestab
12) LPTA Forging for Cont Mesh Gear on Counter Shaft[90]()
Specification : Forging for Constant Mesh Gear on Counter Shaft BS-III LPTA 715 Part No / Drg No 2691 2630 5413 3
C
Nonestab
13) LPTA Forging for King Pin Upper[90]()
Specification : Foring for King Pin Upper Part No 2574 3325 5102 3 R2
C
Nonestab
14) LPTA Forging for Main Shaft[90]()
Specification : Forging for Main Shaft BS-III LPTA 715 Part No 2691 2620 7911 3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HAMMER FORGINGS TO DRG M6 0001E FOR RIFLE 7POINT62 MM 1A1 WITH FIRMS MATERIAL ICR 1256 FULLY FINISHED CONDITION 5000 NOS 2500 SETS[70]()
Specification : AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION FORGING TO DRAWING NO 62C 2206 200 D2 FOR BLOCK TRUNNION A2206 MATERIAL WILL BE ISSUED BY OFT[70]()
Specification : CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT
C
Nonestab
2) CONVERSION FORGING TO DRG NO 62C 2519 200 D2 MATERIAL WILL BE ISSUED BY OFT REQD FOR ROCKING BAR A2519 6P11 2 19 DSCAT NO 1005 007319[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2519 200 D2.
MATERIAL WILL BE ISSUED BY OFT
REQD.FOR ROCKING BAR A2519 6P11-2-19, DSCAT.NO. 1005-007319
"
C
Nonestab
3) FORGING TO DRG 64C 2007 200 E3 WITH FIRMS MATERIAL REQD FOR SEMI RING C2007[70]()
Specification : AS PER DRG OF FORGING TO DRG 64C 2007 200 E3.
WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
C
Nonestab
4) CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR INNER RING TO DRG NO 2A42 02 009 C2009[00]()
Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 2009 200 G3
REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)
C
Nonestab
5) CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42 03 004 C3004[00]()
Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR
PISTON TO DRG NO 2A42.03.004 (C3004)
C
Nonestab
6) FORGING TO DRG NO 64C 5077 200 F3 REQD FOR LEVER MANUAL CONTROL TO DRG NO 2A42 05 077 C5077[70]()
Specification : AS PER DRG TO FORGING TO DRG NO 64C 5077 200 F3. REQD FOR:LEVER MANUAL CONTROL TO DRG.NO. 2A42.05.077 (C5077)
C
Nonestab
7) FORGING TO DRG NO 64C 5115 200 G3 FIRMS MATERIAL REQD FOR CONNECTING LINK RIGID C5115[70]()
Specification : AS PER DRG TO FORGING TO DRG NO. 64C 5115 200 G3.
(FIRM'S MATERIAL)
REQD FOR: CONNECTING LINK RIGID C5115
C
Nonestab
8) CONVERSION FORGING TO DRG NO 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG NO 2A42 05 116 C5116[00]()
Specification : AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116)
C
Nonestab
9) MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR2 FROM OFT MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL
R
Nonestab
10) forging for pre machining of front frame[70]()
Specification : forging for pre machining of front frame
C
Nonestab
11) Forging for pre machining for Rear Cross[70]()
Specification : Forging for pre machining for Rear Cross
C
Nonestab
12) BARREL BLANK AS PER OFT DRG NO TEND 2689 STAR FROM OFT MATERIAL[70]()
Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 STAR FROM OFT MATERIAL
5) FIRST SPRING GOVERNOR
Description : FIRST SPRING GOVERNOR()
Specification : 20-15-603-5
C
Estab
Category : p
Grade : 2
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) SHUTTER SPRING TO CQA AMMN DRG NO QX 344 DC 36103 A DATED 29 03 1996
Description : SHUTTER SPRING TO CQA AMMN DRG NO QX 344 DC 36103 A DATED 29 03 1996()
Specification : SHUTTER SPRING TO CQA(AMMN) DRG.NO.QX-344, DC-36103-A DATED29.03.1996.
C
Estab
2) STRIKER SPRING TO CQA A DRG NO IQX 341 DC 36897 A DT 29 042003
Description : STRIKER SPRING TO CQA A DRG NO IQX 341 DC 36897 A DT 29 042003()
Specification : STRIKER SPRING TO CQA(A) DRG.NO.IQX-341 DC-36897-ADT.29.04.2003
C
Estab
3) DETENT SPRING TO CQA A DRG NO IQX 348 DC 36897 ADT 29 04 2003
Description : DETENT SPRING TO CQA A DRG NO IQX 348 DC 36897 ADT 29 04 2003()
Specification : DETENT SPRING TO CQA(A) DRG.NO.IQX-348 DC-36897-ADT.29.04.2003.
C
Estab
4) DETENT SLEEVE SPRING FOR PART NO 29 TO CQA A DRG NO 3 016919 DET 30 DC 37284 A DT 6 7 2011
Description : DETENT SLEEVE SPRING FOR PART NO 29 TO CQA A DRG NO 3 016919 DET 30 DC 37284 A DT 6 7 2011()
Specification : DETENT SLEEVE SPRING FOR PART NO. 29 TO CQA(A) DRG.NO.3-016919 DET-30 DC-37284-A DT.6.7.2011
C
Estab
5) STRIKER SPRING TO CQA A DRG NO 3 016919 DET 11DC 37284 A DT 6 7 2011
Description : STRIKER SPRING TO CQA A DRG NO 3 016919 DET 11DC 37284 A DT 6 7 2011()
Specification : STRIKER SPRING TO CQA(A)DRG.NO.3-016919 DET-11DC-37284-A DT.6.7.2011.
C
Estab
Category : ddp
Grade : 1
Size :
S
1478
MACKEIL & COMPANY PVT. LTD.
5A/1A Lord Sinha Road, ( 2nd Floor),
Kolkata-700 071
(Off) 033 2282-9195/033 2282-6848
(Fax)033 2282-3834 Lord Sinha Road kolkata West Bengal
PIN1 : 700071
Phone No. : 22829195 GSTIN :
19AACCM1806H1ZN
Specification : PAINT READY MIXED AMMN. AIR DRYING BRUSHING SEMI-GLOSSY FOR GENERAL PURPOSE TURQUIOISE BLUE ISC NO.-102 OF IS-5-2007(6TH REV) TO SPECN 1S-168-1993(REAFFIRMED 2002)(3RD REV) DC NO. DC NO.3685-ME DT 19/3/01 AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
Category : s
Grade : 3
Size :
S
1Vehicle Factory Jabalpur
[ENR Registration]
Name
Specification
Use
Status
1) M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)
Description : M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)()
Specification : M-SEAL GENERAL PURPOSE EPOXY COMPOUND (MS-801/MSH-250)
3) Paint primer red oxide
Description : Paint primer red oxide()
Specification : Paint RFU Priming Redoxide of Iron & Zinc Chromate Universal Synthetic Brushing/spraying to specification JSS-3-47-13 CAT. NO. H1 (A)/8010-000110
P
Estab
4) PLASTIC PUTTY FOR MPV
Description : PLASTIC PUTTY FOR MPV()
Specification : PLASTIC PUTTY FOR MPV
P
Estab
5) SUPPLY AND FIXING OF RESIN AND HARDENER TO ARREST WATER LEAKAGE FROM VARIOUS SUB ASSEMBLIES OF MPV (ARMY & MHA)
Description : SUPPLY AND FIXING OF RESIN AND HARDENER TO ARREST WATER LEAKAGE FROM VARIOUS SUB ASSEMBLIES OF MPV (ARMY & MHA)()
Specification : SCOPE OF WORK
P
Estab
6) QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530
Description : QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530()
Specification : QUICK DRYING (Q.D.) THINNER FOR FINISH AS PER TELCO STANDARD SS-7530
P
Estab
7) THINNER FOR SYNTHETIC PAINTS
Description : THINNER FOR SYNTHETIC PAINTS()
Specification : THINNER FOR SYNTHETIC PAINTS TO SPECN. IS-1872
P
Estab
8) Thinner NC Base
Description : Thinner NC Base()
Specification : PAINT ENAMEL RFU SYNTHETIC EXTERIOR FINISHING BRUSHING GOLDEN YELLOW I.S COLOUR NO. 356 MAKE SHALIMAR/ASIAN/BERGER/BOMBAY/J&N/GOODLESS/NEROLAC AND PACKED IN 20 LTR M.S. DRUM
P
Estab
10) ACRALKD MATT FINISH QD PAINT
Description : ACRALKD MATT FINISH QD PAINT()
Specification : ACRALKD MATT FINISH QD PAINT AS PER TELCO SPEC.SS:7335A COLOUR SCAMIC TO IS :5-91 COLOUR SHADE NO 294
P
Estab
Category : s
Grade : 3
Size :
S
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) Paint RFU Priming Red Oxide of Iron Zinc Chromate.
Description : Paint RFU Priming Red Oxide of Iron Zinc Chromate.()
Specification : IS:2074
P
Estab
2) Paint RFU Matt. Fin. Air Drying, brushing, sraying for painting of vehicles & Equipts.
Description : Paint RFU Matt. Fin. Air Drying, brushing, sraying for painting of vehicles & Equipts.()
Specification : JSS-8010-29-1981
P
Estab
3) PAINTS, PRIMER & THINNER
Description : PAINTS, PRIMER & THINNER()
Specification : AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS
1) PANT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE LIGHT GREY item code 1011341632[10]()
Specification : ISC NO. 631 OF IS-5-2007 (SIXTH REVISION) TO SPECN IS-168-1993 (THIRD REVISION) (REAFFIRMED 2002) DC NO. 3685-ME 984 DT 19-3-01 AS APPLICABLE FOR DEFENCE USE.
R
Estab
Category : s
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PAINT READY MIXED AIR DRYING BRUSHING MAT FINISH DEEP BRONZE GREEN ITEM CODE 1011508224[10]()
Specification : PAINT READY MIXED AIR DRYING BRUSHING MAT-FINISH DEEP BRONZE GREEN ISC-224 OF IS-5-2007(6TH REV) (REAFFIRMED 2017) TOSPECN:IS-168-1993 REAAF.2012 (3RD REV) DC NO.3685-ME DT.19/03/2001.(NOTE:- ONLY BERGER/ASIAN/NEROLAC/SHALIMAR BRAND ONLY)
1) EOD COOLING SUIT
Description : EOD COOLING SUIT
as Authorised Dealer for M/s United Shield International Limited, UK()
Specification : AS PER ENCLOSURE
E
Nonestab
2) EOD HELMET WITH COMMUNICATION SYSTEM
Description : EOD HELMET WITH COMMUNICATION SYSTEM
as Authorised Dealer for M/s United Shield International Limited, UK()
1) EOD BLAST PLATES FOR BOMB DISPOSAL SUIT as Authorised Dealer for OEM M/s. United Shield International Limited, Andover, UK
Description : EOD BLAST PLATES FOR BOMB DISPOSAL SUIT()
