1) BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS
Description : BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS()
Specification : BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS
SPECIFICATION NO. : 1201909/002
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Clothing Factory Avadi
[Deemed Registration]
Name
Specification
Use
Status
1) BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS
Description : BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS()
Specification : BALLISTIC GRADE OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE UNIDIRECTIONAL FABRIC USED IN HARD ARMOUR PANEL HAP OF BODY ARMOURS
SPECIFICATION NO. : 1201909/002
R
Estab
Category : s
Grade : 3
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PARA ARAMID WOVEN FABRIC 150 CM[21]()
Specification : PARA ARAMID WOVEN FABRIC 150 CM
SPECIFICATION NO. PROV/1201909/004 (a)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Cross Linked Polyethylene Foam 3 mm[21]()
Specification : As per specification
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) Poly Carbonate Film zero point 5 mm 1000 x 2004 mm Cut Sheet[21]()
Specification : As per uploaded file
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) ELASTIC TAPE OF VARIOUS SIZE AND COLOUR()
AS PER SPECIFICATION
E
NOT ESTABLISHED
2) CORD ELASTIC OF VARIOUS SIZE AND COLOUR()
AS PER SPECIFICATION
E
NOT ESTABLISHED
3) TAPE POLYESTER OF VARIOUS SIZE AND COLOUR()
AS PER SPECIFICATION
E
NOT ESTABLISHED
4) TAPE NYLON OF VARIOUS SIZE AND COLOUR()
AS PER SPECIFICATION
E
NOT ESTABLISHED
5) WEBBING NYLON POLYESTER OF VARIOUS SIZE AND COLOUR()
AS PER SPECIFICATION
E
NOT ESTABLISHED
6) CORD NYLON / POLYESTER OF VARIOUS SIZE AND COLOUR()
AS PER SPECIFICATION
E
NOT ESTABLISHED
7) ROPE POLYPROPYLENE OF VARIOUS SIZE AND COLOUR()
AS PER SPECIFICATION
E
NOT ESTABLISHED
Category : DP
Grade : II
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING PASGT MEDIUM()
Specification : AS PER ENCLOSURE
E
Nonestab
2) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING PASGT LARGE()
Specification : AS PER ENCLOSURE
E
Nonestab
3) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING ACH MICH MEDIUM()
Specification : AS PER ENCLOSURE
E
Nonestab
4) BALLISTIC HELMET IIIA WITH ACCESSORY MOUNTING MICH LARGE()
Specification : AS PER ENCLOSURE
E
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) CERAMIC PLATES USED IN MANUFACTURE OF FRONT BACK HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE STANDARD (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : AS PER ATTACHED SPECIFICATION
R
Nonestab
2) CERAMIC PLATES USED IN MANUFACTURE OF FRONT BACK HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE LARGE(Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : AS PER ATTACHED SPECIFICATION
R
Nonestab
3) CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE STANDARD (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : AS PER ATTACHED SPECIFICATION
R
Nonestab
4) CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE LARGE(Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : AS PER ATTACHED SPECIFICATION
R
Nonestab
5) CERAMIC PLATES USED IN MANUFACTURE OF FRONT BACK HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE EXTRA LARGE (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : 1201909/003(a)
R
Nonestab
6) CERAMIC PLATES USED IN MANUFACTURE OF SIDE HARD ARMOUR PANELS HAP OF BODY ARMOURS FOR SIZE EXTRA LARGE (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
8) 5 point 5 MM THICKNESS HEX TILES SiC CERAMIC TILE SET FOR COMPLETE BRJ SIZE MEDIUM (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : AS PER ENCLOSURE
R
Nonestab
9) 5 point 5 MM THICKNESS HEX TILES SiC CERAMIC TILE SET FOR COMPLETE BRJ SIZE LARGE (Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : AS PER ENCLOSURE
R
Nonestab
10) 5 point 5 MM THICKNESS HEX TILES SiC CERAMIC TILE SET FOR COMPLETE BRJ SIZE EXTRA LARGE(Authorized Dealer of OEM M/s. Grindwell Norton Ltd, Gujarat)()
Specification : AS PER ENCLOSURE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) UHMWPE UD FABRIC HAP GRADE AU 1135 (As a Sole Selling Agent of OEM M/s. Akiro Protech Pvt Ltd, Bengaluru)()
Specification : AS PER ATTACHMENT
R
Nonestab
2) UHMWPE UD FABRIC SAP GRADE AU 2170 (As a Sole Selling Agent of OEM M/s. Akiro Protech Pvt Ltd, Bengaluru)()
Specification : AS PER ATTACHMENT
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Avadi
Name
Specification
Use
Status
1) PARA ARAMID FILAMENT YARN 3360 DTEX {Authorised dealer of OEM M/s. Teijin India Pvt ltd. Maharastra}()
8) AMMUNITION CONTAINER 47 B, DES. REF CIA/AMN/2483, PT. NO. ISV 515 A SPECN. NO CQA(A) 2804[65]()
Specification : CQA(A) 2804
C
Nonestab
9) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]()
Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE[70]()
Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE[70]()
Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Hand Guard Assembly for JVPC[70]()
Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw
Specification : Hand Guard Assembly for JVPC 5.56 X 30MM Drg No. 0204-03-03-00-08-000-00DD Consisting of Hand Guard Moulding, Insert Hand Guard, Reflector, Hammer Drive Screw
Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,
C
Nonestab
2) CARRY BAG FOR REVOLVER[70]()
Specification : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PLASTIC MOULDED BOX FOR REVOLVER[14]()
Specification : PLASTIC MOULDED BOX AS PER DRG. DRG.NO.SK-4745*2,
C
Nonestab
2) CARRY BAG FOR REVOLVER[70]()
Specification : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTT IN BLACK COLOUR FOR LMG[70]()
Specification : BUTT TO DRG NO CQA SA SK 973 DC I NO 26953 SA DT01 10 16 DS CAT NO 1005 560705
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTT IN BLACK COLOUR FOR LMG[70]()
Specification : BUTT TO DRG NO CQA SA SK 973 DC I NO 26953 SA DT01 10 16 DS CAT NO 1005 560705
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Right[70]()
Specification : GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Right[70]()
Specification : GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER GUN MUZZLE[70]()
Specification : COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER GUN MUZZLE[70]()
Specification : COVER GUN MUZZLE TO DRG NO. CQA (SA) SK-974 DC(I) NO. 26578-SA DT. 04.03.11 IN FINISHED CONDITION (IN BLACK COLOUR). DS CAT NO.1005 - 560751
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) REVOLVER GRIP RIGHT SUB ASSY. and REVOLVER GRIP LEFT SUB ASSY. to DRG. NO. PHMK-III-9SA, PH8-1, P()
AS PER DRG.
C
Not Estab.
2) PLASTIC MOULDED COMPONENTS FOR SMALL ARMS ()
AS PER DRG.
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) REVOLVER GRIP RIGHT SUB ASSY. and REVOLVER GRIP LEFT SUB ASSY. to DRG. NO. PHMK-III-9SA, PH8-1, P()
AS PER DRG.
C
Not Estab.
2) PLASTIC MOULDED COMPONENTS FOR SMALL ARMS ()
AS PER DRG.
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Retainer for JVPC[70]()
Specification : Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC
C
Nonestab
2) Buffer for JVPC[70]()
Specification : Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142[70]()
Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142
C
Nonestab
2) TRIGGER GUARD MOULDING for JVPC[70]()
Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142[70]()
Specification : CLEANING ROD WITH BRUSH AND PULL THROUGH TO DRG.NO.SK-4142
C
Nonestab
2) TRIGGER GUARD MOULDING for JVPC[70]()
Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) CATCH COCKING HANDLE (MOULDING)[70]()
Specification : CATCH COCKING HANDLE (MOULDING) DRG NO. CQA(SA)SK - 998DS CAT NO. 1005-560839, DC(I) NO.26635-SA, DT. 12.05.12IN FINISHED CONDITION.NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695 TO SPECN. IS 5:2007.,
C
Nonestab
2) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]()
Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) CATCH COCKING HANDLE (MOULDING)[70]()
Specification : CATCH COCKING HANDLE (MOULDING) DRG NO. CQA(SA)SK - 998DS CAT NO. 1005-560839, DC(I) NO.26635-SA, DT. 12.05.12IN FINISHED CONDITION.NOTE-THE ITEM WILL BE IN DARK BLUE GRAY COLOUR, COLOUR CODE-695 TO SPECN. IS 5:2007.,
C
Nonestab
2) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]()
Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) Retainer for JVPC[70]()
Specification : Retainer for JVPC, Drg. No. 0204-03-02-00-09-005-00DC
C
Nonestab
2) Buffer for JVPC[70]()
Specification : Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB
C
Nonestab
Category : DDP,DP
Grade : I,II
Size :
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) HDPE BAG WHITE 700X500X100MM ()
AS PER SPECIFICATION
E
NOT ESTABLISHED
2) SELF ADHESIVE POLY BAG 50X35CM ()
AS PER SPECIFICATION
E
NOT ESTABLISHED
3) SELF ADHESIVE POLY BAG 65CMX50CMX0.08MM()
AS PER SPEICIFICATION
E
NOT ESTABLISHED
Category : DP
Grade : I,II
Size :
S
1) Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) HDPE BAG WHITE 700X500X100MM ()
AS PER SPECIFICATION
E
NOT ESTABLISHED
2) SELF ADHESIVE POLY BAG 50X35CM ()
AS PER SPECIFICATION
E
NOT ESTABLISHED
3) SELF ADHESIVE POLY BAG 65CMX50CMX0.08MM()
AS PER SPEICIFICATION
E
NOT ESTABLISHED
Category : DP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SLING ASSY TO DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )[70]()
Specification : AS PER DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPTA BAG[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SLING ASSY TO DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )[70]()
Specification : AS PER DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
2) SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) ROD CLEANING SMALL ARMS DRG NO 30T 1700 021 B3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF ROD CLEANING SMALL ARMS DRG NO:30T 1700 021 B3 FOR 40mm MGL
C
Nonestab
2) SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL[70]()
Specification : AS PER DRG OF SLING TO DRG NO:30T 1700 022 A3 FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPTA BAG[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLEANING ROD AS PER DRG No K 9001 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BRUSH CLEANING 7POINT62mm CHAMBER GAS CYLINDER 1A D S CAT No 1005 000715 D C No 17850 SA DATED 12 04 1984[70]()
Specification : AS PER D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BRUSH CLEANING 7POINT62mm CHAMBER GAS CYLINDER 1A D S CAT No 1005 000715 D C No 17850 SA DATED 12 04 1984[70]()
Specification : AS PER D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Sling Assembly for 7POINT62mm Rifle[70]()
Specification : As per Drawing
C
Nonestab
2) JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9023
WITH FIRMS MATERIAL
E
Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
4) BRUSH CLEANING RIFLE MARK 1 L DS CAT NO 1005 001120 DC NO 26087 SA DT 11 07 05 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
E
Nonestab
5) Slush Brush[70]()
Specification : as per Drg. No.: K-9009 with Firm’s Material
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Sling Assembly for 7POINT62mm Rifle[70]()
Specification : As per Drawing
C
Nonestab
2) JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9023
WITH FIRMS MATERIAL
E
Nonestab
3) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Nonestab
4) BRUSH CLEANING RIFLE MARK 1 L DS CAT NO 1005 001120 DC NO 26087 SA DT 11 07 05 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
E
Nonestab
5) Slush Brush[70]()
Specification : as per Drg. No.: K-9009 with Firm’s Material
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CLOSING CUP FOR 120 MM ILLG.[99]()
Specification : DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT. 06-12-89. TOTAL THICKNESS TO BE 18.0 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CLOSING CUP FOR 120 MM ILLG.[99]()
Specification : DRG.NO.OFDR/CARTG-113/A-3 AMDT- REF NO.17 DT. 06-12-89. TOTAL THICKNESS TO BE 18.0 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CONTAINER 63 A[65]()
Specification : SPECN. NO. CQA(A) 2805 (H) DC-36145-A [DRG. NO. CIA/AMN/2174 PART NO. ISV 506A DC 36166-A]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CONTAINER 63 A[65]()
Specification : SPECN. NO. CQA(A) 2805 (H) DC-36145-A [DRG. NO. CIA/AMN/2174 PART NO. ISV 506A DC 36166-A]
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CUP FOR BOMB 51MM ILLG.[62]()
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III
Description : GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Estab
Category : p
Grade : 3
Size :
S
1563
SUDIP ENGINEERING
335,BAKULTALA LANE ,RAMRAJATALA,P.O-SANTRAGACHI WEST BENGAL HOWRAH West Bengal
PIN1 : 711104
Phone No. : 26271523 GSTIN : 19AJVPM5458Q1ZV
Specification : SUPPORTING CLAMP TO DRG NO. 172.03.038CB
C
Nonestab
4) CLUTCH SHAFT ASSY TO 6206419017[62]()
Specification : CLUTCH SHAFT ASSY TO 172.63.068CB
C
Nonestab
5) LOCK HANDLE TO 6206109012[62]()
Specification : LOCK HANDLE TO 432.11.007CB-1
C
Nonestab
6) ROLLER SUPPORT TO 6206203018[62]()
Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PAD TO 6201070149[62]()
Specification : PAD TO DRG. NO.188.70.001-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) PIN LOCK BUTTON FOR RIFLE 5.56MM EXCALIBUR.()
AS PER DRAWING.
C
Not Estab.
2) FIRING PIN NUT FOR 30-06 SPORTING RIFLE.()
AS PER DRAWING.
C
Not Estab.
Category : DDP,DP
Grade : I,II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) HINGE TO 6201004080[62]()
Specification : 184.04.005-1
C
Nonestab
2) LEVER ASSY TO 6201095016[62]()
Specification : LEVER ASSY TO DRG NO. 188.95.010CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEFT HAND SUCTION PUMP COVER TO 6206407098[62]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CONE (SK NO OTF/S/015) TO DRG NO 4-025998 DET NO 069 FOR 125MM HEAT[62]()
Specification : CONE (SK NO OTF/S/015) DRG NO 4-025998 DET NO 069 FOR 125MM HEAT
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION.[70]()
Specification : CATCH MAGAZINE TO SK.NO.CTM-0032 A (PB-9) WITHOUT NICKEL PLATING IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STRIKER IN FINISHED CONDITION TO DRG.NO. F.D. 1307, PT. NO. QX-331 DC NO.- 37263, DT 26.08.2010[63]()
Specification : AS PER REQUIRED SPECIFICATION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) EXTRACTOR ASSY.. F-1303-007320 D[71]()
Specification : EXTRACTOR ASSY. TO PART DRG. NO. F1303-007320D
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Pin Release IN FINISHED CONDITION[63]()
Specification : PIN RELEASE IQX-320 IN FINISHED CONDITION. DC NO. 36997-A, DT. 25.01.2005
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) BASE PLATE IN F/ COND. TO DRG. NO. F-1321-425450C FOR FUZE FFV 64C[63]()
Specification : DRG. NO. F-1321-425450C FOR FUZE FFV 64C
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO. CTM-0033A IN FINISHED CONDITION[70]()
Specification : TRIGGER WITHOUT NICKEL PLATING TO DRG. NO. CTM-0033A IN FINISHED CONDITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)[70]()
Specification : HAMMER TO DRG.NO.M-8197-C (PB-4) DT:-20.08.04. IN FINISHED CONDITION)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LEVER SEAR TO DRG. NO.M-8202F(PB-16) FOR 0.32[70]()
Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION[70]()
Specification : EXTRACTOR WITHOUT NICKEL PLATING TO DRG.NO.CTM-0044 E (PB-15) DT:- 24.08.11 IN FINISHED CONDITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]()
Specification : DRG. NO. SK-8345/C
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()
Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5
C
Nonestab
2) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR
C
Nonestab
3) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Magazine to DRG. NO. IQX-1012 IN FINISHED CONDITION[63]()
Specification : Part No QX 1539 for Fuze 117 Mk-20
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) LOCATOR TO DRG. NO. NAI(J)/501/6/1 IN FINISHED CONDITION[60]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLOCK REAR BLANK FOR GHAATAK[70]()
Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
C
Nonestab
2) NUT FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PERDRG. NO. AR/01/23 ALT[70]()
Specification : NUT FORE SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PERDRG. NO. AR/01/23 ALT
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER HOLDER FOR 12 BORE PUMP ACTION GUN[70]()
Specification : LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) ARM SEAR CONNECTING FOR 9MM AUTO PISTOL.[70]()
Specification : ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CATCH HAMMER FOR REVOLVER .32"[70]()
Specification : Catch Hammer to DRG No. PHMK-II-6-4 in finished condition
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Plunger Multi Application (Wheel Lock) to DRG No. ARDE/SK-2689/154 in finished condition[70]()
Specification : PLUNGER MULTI APPLICATION(WHEEL LOCK)
TO DRG. NO.ARDE/SK-2689/154 IN F/D CONDN. DS CAT NO.1005-007789
C
Nonestab
2) BLOCK FIXING PISTOL GRIP L5 FOR INSAS 5.56 MM[70]()
Specification : Block Fixing Pistol Grip to DRG No. ARDE SK-2689/121 (DS CAT No. 1005-007784) in finished condition
C
Nonestab
3) PAWL HAMMER DRG NO. SK2689/170[70]()
Specification : Pawl Hammer ARDE SK 2689/170 to DS CAT No. 3040-003115 in finished condition
C
Nonestab
4) Catch Trigger to DRG No. PHMK-III-7-2[70]()
Specification : Catch Trigger to DRG No. PHMK-III-7-2
Specification : BLADE FORESIGHT DRG NO-PHMK-IV-3-1-3 IN FINISHED CONDITIONREQUIRED FOR REVOLVER MK-IV,
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR SAFETY (ICR-1281) (L.F.7011606010)[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SEAR TO DRG NO 33P 3052[70]()
Specification : AS PER DRAWING
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315[70]()
Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle
C
Nonestab
2) SEAR TO DRG NO.29P 0060*2 required for 0.315[70]()
Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle
C
Nonestab
3) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315[03]()
Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
C
Nonestab
4) CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315[70]()
Specification : AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle
C
Nonestab
5) BED BACKSIGHT ASSEMBLY CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315[70]()
Specification : AS PER DRG CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle
C
Nonestab
6) BAND FORE SIGHT TO DRG. NO.29 P 0002* required for 0.315[70]()
Specification : AS PER DRG. NO.29 P 0002* required for 0.315" Sporting Rifle
C
Nonestab
7) TRIGGER TO DRG.NO.: 29P 0040* required for 0.315[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1[70]()
Specification : AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
C
Nonestab
2) REGULATOR GAS TO (ICR 1247) DRG.NO. TEND 1877*4[70]()
Specification : AS PER (ICR 1247) DRG.NO. TEND 1877*4
C
Nonestab
3) SEAR TO DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)[70]()
Specification : AS PER DS CAT NO 1005-001680 TO DC NO 22786-SA DATED 02.01.1995 FOR RIFLE 7.62MM (ICR-1231) (WHITE FINISHED CONDITION WITH FIRM'S MATERIAL)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CAP SLING TO DRG NO.: 29P 0044* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO.: 29P 0044* required for 0.315" Sporting Rifle
C
Nonestab
2) PAD SLING TO DRG.NO.29P 0037 required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0037 required for 0.315" Sporting Rifle
R
Nonestab
3) PIN CATCH MAGAZINE TO DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0047* required for 0.315" Sporting Rifle
C
Nonestab
4) SWIVEL SLING FRONT 29P 0070* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG No.29P 0070* required for 0.315" Sporting Rifle
C
Nonestab
5) SWIVEL SLING REAR TO DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0065* required for 0.315" Sporting Rifle
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
2) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER,TRIPPING[70]()
Specification : LEVER,TRIPPING TO DS CAT NO. 5340-016094 ( LT.DC- 26827 SADT.10-5-2016).MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PERCOL.(C) OF SL. NO.1 OF CQA(SA) NOTE SHEET NO.1.NMIR TEST TO IS:4163-82 WILL BE AS PER COL.(C) OF SL. NO.3OF CQA(SA) NOTE
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) SEAR FOR 9MM AUTO PISTOL.[70]()
Specification : SEAR TO DS CAT NO. 1005-003172 (LT.DC-26819-SA DT.22.04.16)1)MACROETCH TEST TO ASTME 381-1984 WILL BE AS PR COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.12)NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OFCQA(SA) NOTE SHEET NO.1 (FO
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) SLIDE REAR SIGHT FOR 30-06 SPORTING RIFLE()
As per Drawing
C
Nonestab
2) BRACKET REAR SIGHT FOR 0.22[70]()
Specification : STEEL BS 970 En19A
C
Nonestab
3) BRACKET REAR SIGHT FOR 30-06 SPORTING RIFLE.[70]()
Specification : BS:970 PT.1 GR 070 M55 OR En-9
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER SLIDE LOCKING BLANK (RFI SK-8035*3) FOR FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) WEDGE ASSY TO 6206809012[62]()
Specification : WEDGE ASSY TO DRG NO. 172.20.029CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACE ASSY[06]()
Specification : BRACE ASSY / 54.28.772CBCB
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) POINTER ASSY / 188.95.003CBCB[06]()
Specification : POINTER ASSY / 188.95.003CBCB
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THRUST DISC / 172.95.060[06]()
Specification : THRUST DISC / 172.95.060
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) THRUST BUSHING / 175.95.114-1[06]()
Specification : THRUST BUSHING / 175.95.114-1
E
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FIXTURE FOR PRESSING OUT BUSHING,PART 432.43.046 FINAL DRIVE ASSY / 432.95.333CBCB[06]()
Specification : FIXTURE FOR PRESSING OUT BUSHING,PART 432.43.046 FINAL DRIVE ASSY / 432.95.333CBCB
1) FRONT HOOK TO DRAWING NO 172 01 456 3 LF 6101006055[61]()
Specification : SERVICE ASSISTANCE
C
Nonestab
2) COVER TO DRG NO 175 03 006 1A LF 6106802068[61]()
Specification : SERVICE ASSISTANCE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) ROLLER SUPPORT TO 6206203018[62]()
Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHAFT TO 6206102096[62]()
Specification : SHAFT TO DRG NO. 166.29.305CB
C
Nonestab
2) FRAME ASSY TO 6206207012[62]()
Specification : FRAME ASSY TO DRG NO. 172.22.011CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD HINGED FRONT LEFT HAND TO 6206803352[62]()
Specification : SHIELD HINGED FRONT LEFT HAND TO DRG NO.184.04.029CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD REAR LEFT HAND TO 6206803050[62]()
Specification : SHIELD REAR LEFT HAND TO DRG NO.172.04.198CB
C
Nonestab
2) SHIELD REAR RIGHT HAND TO 6206803052[62]()
Specification : SHIELD REAR RIGHT HAND TO DRG NO.172.04.200CBCB
C
Nonestab
3) SHIELD HINGED FRONT RIGHT HAND TO 6206803351[62]()
Specification : SHIELD HINGED FRONT RIGHT HAND TO DRG NO. 184.04.028CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET CELL LIFTING TO 6206890004[62]()
Specification : BRACKET CELL LIFTING TO DRG NO. 175.28.002CB-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : II
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LOUVER LH TO 6209801477[62]()
Specification : PV572.0718.2363
C
Nonestab
2) LOUVER RH TO 6209801480[62]()
Specification : PV572.0718.2362
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LH LEVER ASSY TO 6206403001[62]()
Specification : LH LEVER ASSY TO DRG NO. 172.42.003CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEVER ASSY TO 6201095016[62]()
Specification : LEVER ASSY TO DRG NO. 188.95.010CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RWA BRACKETS (07 TYPES) ()
SERVICE ASSISTANCE
C
Not Established
2) MACHINING ASSISTANCE FOR SMALL, MEDIUM & LARGE COMPONENTS()
AS PER DRG
C
Non Established
Category : P
Grade : II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF CENTRAL SPIDER SPROCKET DRG NO 9 A 621 00 001 FROM RAW MATERIAL[91]()
Specification : FABRICATION OF CENTRAL SPIDER/SPROCKET DRG NO. 9-A-621.00.001 FROM RAW MATERIAL CENTRAL SPIDER/SPROCKET DRG. NO. M-11467 MACHINING AFTER HEAT TREATMENT AS PER PROCESS SCHEDULE
R
Nonestab
2) SEMI STAGE MACHINING OF CENTRAL SPIDER SPROCKET TO DRG NO M 11441 FROM INPUT MATERIAL[91]()
Specification : SEMI STAGE MACHINING OF CENTRAL SPIDER/SPROCKET TO DRG NO M-11441 FROM INPUT MATERIAL I/CODE NO. 0372150165 (MACHINING AS PER PROCESS SCHEDULE)
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEFT HAND SUCTION PUMP COVER TO 6206407098[62]()
Specification : LEFT HAND SUCTION PUMP COVER TO DRG NO. 172.46.009CB-2CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019
Description : FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019()
Specification : FABRICATION OF PINION SHAFT TO DRG. No. AO-18.03.019
C
Estab
2) FABRICATION OF PINION TO DRG NO AO 18 03 025
Description : FABRICATION OF PINION TO DRG NO AO 18 03 025()
Specification : FABRICATION OF PINION TO DRG. No. AO-18.03.025
C
Estab
Category : p
Grade : 3
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981[91]()
Specification : COMPLETE MACHINING OF BREECH PIECE (AO-18.01.001), FROM INPUT MATERIAL I/C:- 7230971001 TO BE SUPPLIED BY GSF (I/C-9140033981)
C
Nonestab
2) SHUTTER BUSH AO 18 01 029 IN FINISHED CONDITION IC 7200200298[72]()
Specification : SHUTTER BUSH (AO-18.01.029) IN FINISHED CONDITION (I/C-7200200298)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FENCE TO 6206109006[62]()
Specification : FENCE TO DRG NO. 172.11.026CB-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BODY ASSY TO 6206861005[62]()
Specification : BODY ASSY TO DRG NO. 172.52.046CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) PIPE LINE TO 6201066098[62]()
Specification : PIPE LINE TO DRG NO. CQA(HV)5.66.066
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()
Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacturing and supply of barrel blank after honing stage[70]()
Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CLUTCH SHAFT ASSY TO 6201063014[62]()
Specification : CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL[91]()
Specification : FABRICATION OF DRUM/BARREL TO DRG NO 9-A-621.06.035 FROM GSF SUPPLIED MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HEAD AUTOMATIC COCKING RAMMER ASSY TO DRG NO 2007475 IN FC[71]()
Specification : HEAD AUTOMATIC COCKING RAMMER ASSY. TO DRG NO. 2007475 IN F/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET ASSY TO 6201015010[62]()
Specification : BRACKET ASSY TO DRG NO. 188.15.018CB-3CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FILLER CAP 011[62]()
Specification : FILLER CAP 172.41.011
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
2) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270[91]()
Specification : Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9081008458 MACHINING OF END COVER TO DRAWING NO 4071725 MATERIAL WILL BE SUPPLIED BY GCF[90]()
Specification : MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9070056720 PART M A OF RB TO DRG GCF 20A SK874[90]()
Specification : 9070056720 PART M A OF RB TO DRG GCF 20A SK874
Specification : PAPER WRAPPING WAXED KRAFT AMMUNITION-1118mm X 182.88 m SPECN:JSS 8135-05:2013 REVISION NO.4 DC 5186(ME) DT:19-03-2014.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) MILL BOARD 800 X 550 X 2.5 MM TH (1421203628)[14]()
Specification : MILL BOARD AMMN. 800 MM X 550 MM X 2.50 MM +/- 0.35 MM THICK TO SPECN : JSS-9310-01 : 2014 REVISION NO.3DC NO. 5290-ME DT.16.12.2014. MASS 2675 +/- 400 g/m2.NOTE- CUPPING TEST INVARIABLY BE CONDUCTED FOR THE ACCEPTENCE OF MATERIAL BY AREA
R
Nonestab
2) PAPER LAMINATED GR.1 60.96 /91.44CM (1410017170)[14]()
Specification : PAPER LAMINATED GR.1 SIZE 0.25 TO 0.33 MM THICK x 60.96 CM OR 91.44 CM WIDE IN ROLL TO SPECN:-IND/ME/786(d) DC NO.5261--ME DT.24/06/2014.
R
Nonestab
3) PAPER LAMINATED 0.9 TO 1MM THICK (1410017166)[14]()
Specification : PAPER LAMINATED 0.9 TO 1 MM THICK X 127MM WIDE TO SPECN: IND/ME/786(C) DC NO.3754 - ME DT.12/12/2002.
R
Nonestab
4) PAPER LAMINATED GRADE I WIDTH 130MM (1410017165)[14]()
Specification : PAPER LAMINATED GRADE I SIZE 0.25 TO 0.33 MM THICK X 130 WIDE TO SPECN NO IND/ME/786(C) DC NO 3754-ME DT 12/12/2002.
R
Nonestab
5) PAPER LAMINATED GR III WIDTH 127MM (1410010078)[14]()
Specification : PAPER LMINATED GR III SIZE 0.65 TO 0.73 MM THICK X 127 MM WIDE TO SPECN IND/ME/786(C) DC NO 3754-ME DT 12/12/2002
R
Nonestab
6) PAPER LAMINATED GR.III (102MM) (1418947290)[14]()
Specification : PAPER LAMINATED GR-III 0.65 TO 0.73 MM THICK X SLITTED INTO 102 MM WIDE STRIP ROLL. TO SPECN : IND/ME/786(d). DC NO-5261-ME DT. 24/06/2014.
R
Nonestab
7) PAPER LAMINATED GR.2 0.45 TO 0.53MM (1410017676)[14]()
Specification : PAPER LAMINATED GR.II SIZE- 0.45 TO 0.53MM THICK X 91.44CMS WIDEIN ROLLS TO SPECN:IND/ME/786(d)DC NO.5261-ME DT 24/06/2014.
R
Nonestab
8) PAPER LAMINATED GR.1 0.25 TO 0.33MM (1410017178)[14]()
Specification : PAPER LAMINATED GR.I SIZE 0.25 TO 0.33mm THICK x 108mm WIDE IN ROLL TO SPECN:- IND/ME/786(d) DC NO 5261-ME DT 24/06/2014.
R
Nonestab
9) PAPER LAMINATED GR.3 0.65 TO 0.73MM (1410010084)[14]()
Specification : PAPER LAMINATED GR-III,0.65 TO 0.73 MM X THICK 91.44CMS WIDEIN ROLL TO SPECN:-IND/ME/786(d):2013 DC NO-5261-MEDT.24/06/2014.
Specification : MILL BOARD 787.4 MM X 558.3 MM X 1.25+/-0.18 MM THICK TO SPECN: JSS-9310-01:2014 (REV.NO.3) DC NO.5290-MEDT.16.12.2014. MASS 1450+/-220 g/sqm.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SUPPORT TO DRG[62]()
Specification : SUPPORT TO DRG.NO.4-24929/3 K33/060DC NO.36735-A, DT-29.01.2001.
C
Nonestab
2) PAPER CARTON BOARD TO JSS:8135-15-2010,REV.NO.2 DC NO.4066 ME[14]()
Specification : PAPER CARTON BOARD TO JSS:8135-15-2010,REV.NO.2 DC NO.4066 ME,DT.19.07.10 WITH CUPPING QUALITY SIZE:760MM*890MM*0.762MM THICK.
Specification : DISC, PWF 12.7MM DAI,TO SPECN:JSS- 9310-06;2002, REAFD. 2011 DC NO.5044 ME, DT.15.12.11 AS PER DRG.NO.IQX-144- GF,ITEM NO.4.
C
Nonestab
4) DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-[62]()
Specification : DISC DIA. 32.25MM X 0.5MM THICK GLAZED BOARD TO SPEC. JSS:8135-13:2014,REV-3,DC:5257-ME, DT.18.06.14 PA 1992 WAXED (REF: DESIGNERS REF. NO.CIA/AMN/2176,PART NO.ISX-77GF,ITEM NO-9 DC:37013-A,DT.06.05.2005)
C
Nonestab
5) CARTON EMPTY TO DESIGN. REF. NO. S.DETAIL. 1852 DC NO[62]()
Specification : CARTON EMPTY TO DESIGN. REF. NO. S.DETAIL. 1852 DC NO.30102-A DT.11.01.75 FOR CE PELLET (MK 1/1/L, 53.16 GM) TO DRG.NO. SX 12 AF. DC NO.35462-A DT.07.09.93.
C
Nonestab
6) DISC PAPER WHITE FINE , 30.99MM DIA MATERIAL:-PAPER WHITE FINE AMMN[62]()
Specification : DISC PAPER WHITE FINE , 30.99MM DIA MATERIAL:-PAPER WHITE FINE AMMN.TO JSS:9310-06:2002, DC:5044-ME, DT.15.12.11 REAFFIRMED 2011 SUBSTANCE-42-46 GSM) FOR CE PELLET MK 1/1/L, 53.16 GRAM TO DRG. NO.SX 12 AF.
C
Nonestab
7) PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) TO SPEC.JSS-8135-05:2013[14]()
Specification : PAPER WRAPPING WAXED KRAFT AMMN. (BROWN) TO SPEC.JSS-8135-05:2013(REV 4), DC NO.5186-ME, DT.19.03.2014 SIZE: 482*635*0.15 to 0.18 MM (T).
C
Nonestab
8) DISC PAPER WHITE TO DRG.NO-QX-1534 D.C.[62]()
Specification : DISC PAPER WHITE TO DRG.NO-QX-1534 D.C. NO.36123A DATED:06.06.96
C
Nonestab
9) MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014[61]()
Specification : MILL BOARD, SIZE-787X558X2.5MM (T) TO SPECN. JSS-9310-01:2014, REV-3, DC-5290 ME, DT.16.12.14 WITH CUPPING QUALITY.AS PER DRG.NO.IRW145(CUP) DC NO.36005-A DT.18.09.95.
C
Nonestab
10) PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE[62]()
Specification : PAPER WHITE FINE,SIZE:L-762 X W-508 (MM),SUBSTANCE 42-46 GRRAM/SQ.METRE TO SPECN.JSS-9310-06: 2002,DC NO:3738-ME,DT.17.09.2002 (REAFFIRMED 2011)
C
Nonestab
11) STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE[65]()
Specification : STRIP PAPER WHITE FINE (55X33) MM MATERIAL: PAPER WHITE FINE 42-46 GSM TO SPECN.JSS-9310-06: 2002 (REAFFIRMED 2011).
C
Nonestab
12) DISC TO DRG.NO.FD 537 TO DRG. PART NO[65]()
Specification : DISC TO DRG.NO.FD 537 TO DRG. PART NO.QX-324, DC-36103-A DT.29.3.96.
C
Nonestab
13) CARTON BOARD SIZE(260X70X0.51)MM TO JSS 67-07[14]()
Specification : CARTON BOARD SIZE(260X70X0.51)MM TO JSS 67-07:APR 65.(ONE SIDE WHITE) DC NO.3253-ME DT.14.01.95.
C
Nonestab
14) DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD[64]()
Specification : DISC D=18B7MM X 0.5 TO 0.9 MM THICK MATERIAL SPECN.TO GOST:21641-76 OR MILL BOARD TO JSS-9310-01 :2014 , REV-3,DC NO.5290-ME DT-16.12.14 OR BOARD STRAW TO SPECN. JSS:8135-11-2008 (REVISION NO.2) DC NO.3553-ME,DT. 12.3.99 REF DRG.NO.4-0270
C
Nonestab
15) PAPER WASHER (SIZE:-OD-30MM,ID-24MM THICK-0.254 +/-0.025 MM)[62]()
Specification : PAPER WASHER (SIZE:-OD-30MM,ID-24MM THICK-0.254 +/-0.025 MM),MATERIAL SPECN:-BOARD GLAZED CALENDERED AMMUNITION TO SPECN:JSS:8135-13:2007 REV NO-2,DC-3554- ME, DT.12.03.99 WITH CUPPING QUALITY.(MATERIAL TO BE WAXED BY WAX PARAFFIN)
C
Nonestab
16) DISC-IV NO.01[61]()
Specification : DISC-IV NO.01 TO SPECN:OST-84-796-78,INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAZED CALANDER AMMN TO JSS:8135-13:1998 DC NO.3554-ME 12.03.99 OR MILL BOARD AMMN. (CUPPING QUALITY) TO JSS:9310-01:1994, DC NO.3279-ME, DT.21.02.95.
C
Nonestab
17) DISC-II NO.23[61]()
Specification : DISC-II NO.23 TO SPECN:OST-84-796-78,INDIGENOUS EQUIVALENT MATERIAL:BOARD GLAGED CALANDER AMMN TO JSS:8135-13:2007,REV-2 OR MILL BOARD AMMN.(CUPPING QUALITY) TO JSS:9310-01:2007-REV.2.
C
Nonestab
18) DISC[63]()
Specification : DISC TO DRG.3-027321-4B2-4,DC NO- 36811-A,DT.14.02.2002
1) WAX PAPER KRAFT CUP DISC TYPE, SIZE: 194 DIA+/- 1MM, THICKNESS-0.18MM)()
MATERIAL: PAPER KRAFT AMMN. TO SPECN: JSS-8135-017:2002, DC.NO.3731-ME, 16.05.2002. SUBSTANCE:125+/-5GSM (NOTE-MATERIAL WAXED WITH PARAFFIN WAX SPECIAL TO SPECN:JSS-9160-06, DC-3768-ME, DT.17.06.2003)
C
Not Estab
2) PAPER BROWN (WAXED), 320*280(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05-1994, DC NO.3732-ME DT.16.05.2002.
C
Not Estab
3) PAPER BROWN (WAXED), 280*195(MM) ()
MATERIAL PAPER WRAPPING WAXED KRAFT AMMN.TO SPEC.JSS-8135-05 -2013-REV.4 DC-5186-ME DT.19.03.14.
DRG.NO.QX-211DC NO-35703-A,DT.03.05.94 FOR FUZE 117 MK-20
C
Not Estab
11) WASHER GLAZE BOARD ()
DRG.NO.QX-175DC NO:36103-A, DT.29.03.96 [ MATERIAL:GLAZE BOARD TO JSS-8135 -13-2014 Rev 3 5257-ME , DT-18.06.14 OR CARTON BOARD TO JSS-8135-15-2010 REV-2 , DC NO . 4066 ME , DT-19.07.10
C
Not Estab
12) CYLINDER()
DRG.NO.BL/CD/CC-130/035DT.16.04.2001. (REF.DRG.NO:3-022483/54-bH-482/13, DC NO: 36134-A, DT.04.07.96 NOTE: TO BE SUPPLIED AS PER SMALL CYLINDER OF SIZE: LENTH: 50MM x ID: 115MM.
C
Not Estab
13) MILL BOARD DISC TO SIZE: 93 MM DIA x 3 MM THICK (WAXED)()
DRG.NO:CIA/AMN/2650,DRG.PART NO.ISV-482 GA DC NO.37330-A, DT.04.02.2013 MATERIAL:MILL BOARD TO JSS:9310-01-2014-Rev-3 DC-5290 DT.04.02.2013.
JSS:9310-06:2011, DC: 5044 ME, DT.15.12.2011 TREATED WITH NC LACQUER AND DUSTED WITH FRENCH CHALK. REF. DRG.NO. CIA/AMN/2176, PART NO-ISX-77 GF, ITEM NO-3, DC:37013-A,DT.06.05.2005
C
Not Estab
16) PELLET COVERING ()
DRG. CIA/AMN/ 1901 DET.4, PART NO: IQX 785 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL-70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.03.03.93
C
Not Estab
17) DISC()
DRG. CIA/AMN/1901 DETAIL.2PART NO: IQX-783 FOR PELLET SMOKE, 42.5 GRAM, TNT/AL70/30 TO DRG. CIA/AMN/1901 DCI 35462-A DT.3.3.93. [MATERIAL:PAPER WHITE FINE TO SPECN.JSS 9310-06:2002 REAFFIRMED 2011]
C
Not Estab
18) DISC PAPER WRAPPING HARD, 30.99 MM DIA.()
MATERIAL-PAPER CRAFT AMMN. TO SPECIFICATION JSS: 8135 -017:2010, DC-5016-ME DT.16.03.2011 FOR CE PELLET (MK 1/1/L, 53.16 GRAM) TO DRG. NO.SX 12 AF. DC NO.35452-A DT.07.09.93.
C
Not Estab
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Itarsi
Name
Specification
Use
Status
1) PAPER WRAPPING WAXED KRAFT AMMUNITION ()
SPCN NO.JSS8135-05-2013 DC NO.5186-ME DT. 10-03-2014 REVISION NO. R IN ROLL OF WIDTH 112 CMS AND LENGTH 180 MTER S G.S.M 85-105 GRAM
R
Not Estab
Category : DP
Grade : II
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1422006617 GLAZED BOARD 1.00 X 700 X 525 MM[14]()
Specification : GLAZED BOARD CALENDERED AMMUNITION TO SPECN. JSS 8135 -13 DC3554-ME SIZE 700 X 500 X 0.20 MM SUBSTANCE :- 250 +- 25 GSM.
R
Nonestab
2) 1422005228 GLAZED BOARD[14]()
Specification : BOARD GLAZED CALENDERED AMMUNITION TO SPECN.JSS 8135-13:1998DC NO. 3554 -ME DT 12-03-99 SIZE -700 MM X 525 MM X 0.30 MM+- 0.03 MM THICK
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1420215823 GLAZED BOARD 525 mm[14]()
Specification : JSS 8135-13:2007
R
Nonestab
2) 1422005117 GLAZED BOARD 2 X 630 X 420 MM[14]()
Specification : JSS-8135-13:2007
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Piece Packing Mill Board[25]()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
R
Nonestab
2) PAPER CORRUGATED AMMUNITION[14]()
Specification : PAPER CORRUGATED AMMUNITION SINGLE FACED COARSE FLUTE WIDTH 26" TO JSS-8135-08-2014, REV.NO.4.
R
Nonestab
3) PAPER WRAPPING WAXED CRAFT AMMUN[14]()
Specification : PAPER WRAPPING, WAXED KRAFT AMMUNITION CONFORMING TO SPECIFICATION : JSS 8135-05-2013 REV.NO 4, DC-NO.5186-ME DTD.19.03.14, WIDTH OF ROLL - 110.5 CM, WEIGHT OF ROLL- MINIMUM-17 KG.
R
Nonestab
4) PAPER WASHER GLAZED BOARD[64]()
Specification : PAPER WASHER GLAZED CALENDERED AMMN TO SPCN. JSS 8135-13- 2014 (REV.NO-3) 0.50MM(0.02") THICK OF SIZE 56 MM OD X 36 MM ID.TO DRAWING NO.ERDL DRG 671 DET 9. .
R
Nonestab
5) PAPER WHITE FINE AMMUN[14]()
Specification : PAPER WHITE FINE AMMUNITION TO SPECIFICATION JSS-9310-06- 2002 (REAFFIRMED 2011). (D.S. CAT NO. 9310-000007) THICKNESS 0.051 PLUS OR MINUS 0.005 MM AND SIZE 762 X 508 MM.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) PRESS PAHN BOARD DISC[14]()
Specification : PRESS PAHN BOARD DISC THICKNESS 2.0 0.2 MM AND SUBSTANCE 2200 + 110 GRAMS PER SQUARE MTR TO SPECN. JSS: 5970-11,2015(Rev.NO-2).DRG.NO.CI(A) 6388106, DC(I) 34186-A DTD.03.08.87.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Corrugated Card Board Box[14]()
Specification : CORRUGATED CARD BOARD BOXES AS PER DRG.NOS.OFBA/BT/52 G/1, OFBA/BT/52 G/1/1,OFBA/BT/52/W,OFBA/BT/53 G/1,OFBA/BT/53G/1/1 INNER BOX TO BE WAX COATED INSIDE AND OUTSIDE SURFACE.OUTER BOX TO BE WAX COATED INSIDE SURFACE ONLY.
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Varangaon
Name
Specification
Use
Status
1) CARTON BOARD AMMN (787.4 x 558.8 x 0.508)[14]()
Specification : PACKING PIECE MILL BOARD (108 MM X 108 MM X 3 MM THICK) AS PER JSS 9310-01-2014 (REVISION NO-3) AND CQA(A) KIRKEE DRAWING NO.13603-0-0.
R
Estab
2) CARTRIDGING PAPER Gr II
Description : CARTRIDGING PAPER Gr II()
Specification : CARTRIDGING PAPER GR-2 MACHINE GLASED(ONE SIDE ONLY) IN ROLL,BOBBIN DIA OF 800 MM, BOBBIN CENTER SLEEVE DIA OF 70 MM AND ROLL WIDTH OF 170 MM AS PER SPECN IS:1397 : 1990,Second Revision (Amendment NO 1)REAFFIRMED 2002.
R
Estab
Category : p
Grade : 2
Size :
S
1) Ammunition Factory Khadki
[ENR Registration]
Name
Specification
Use
Status
1) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF 610 mm TO 914 mm WIDTH DIA OF ROLL 450 mm TO 600 mm TO SPECN JSS 9310 03 2010 REV 1 DC 5023 ME EXCEPT FOR BURSTING STRENGTH WHICH SHOULD BE BETWEEN 125 AND 250 KPa()
Specification : JSS 9310 03 2010 REV 1 DC 5023
R
Estab
2) PAPER FOR BASE WADS FOR PAPER CARTRIDGE CASES IN ROLLS OF610 mm TO 914 mm WIDTH AND DIA OF ROLLS 450 mm TO 600 mm.SPECN.JSS 9310-03()
Specification : JSS 9310-03 :2010
R
Estab
3) PAPER KRAFT AMMUNITION 635 MM X 482.6 MM X 125(DS CAT 8135-000 349) PLUS MINUS 5 GMS. PER SQUARE METRE. TO SPECN .JSS : 8135-017()
Specification : JSS : 8135-017:2002
R
Estab
4) PAPER WHITE FINE .051MM TH.42-46 GSM.()
Specification : JSS 9310-06:2002
R
Estab
5) MILL BOARD AMMN 762X1016X2.50 MM()
Specification : JSS 9310-01:2014
R
Estab
6) CARTON BOARD 787.4X558.8X0.508MM()
Specification : JSS 8135-15 :2010
R
Estab
7) BOARD CARTON AMMN. SIZE 870 mm X 620 mm X 0.508 mm+- 0.051 MM THICK ( INCLUDING PURE KRAFT LINING ) TO SPECN.JSS 8135-15()
Specification : JSS 8135-15 : 2010
R
Estab
8) CARTON BOARD787.4X1117.4X0.762 MM()
Specification : JSS :8135-15:2016
R
Estab
9) BOARD CARTON1SIDE WHITE31"X44"X.03"()
Specification : JSS:8135-15:2016
R
Estab
10) PAPER FOILING 762 X 508()
Specification : JSS -9310-06-2002
R
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO
Description : DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO()
Specification : DISC(WAXED)86MM DIA x6MM THICK WAXED ITEM NO-4 TO DRG PART NO:ISV-483 GA. DCI NO. 35983-A DT.29.7.95 MATERIAL:MILL BOARD TO JSS:9310-01-2014 REV-3 DC - 5290 ME DT.16.12.14
C
Estab
2) STRENGTHENED COVER TO DRG.3-022483
Description : STRENGTHENED COVER TO DRG.3-022483()
Specification : STRENGTHENED COVER TO DRG.3-022483 /54-bH-482/12,DC NO.36134-A, DT.04.07.96
C
Estab
3) PAPER TUBE(AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm_6390100003
Description : PAPER TUBE(AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm_6390100003()
Specification : PAPER TUBE(AP/T)ID=17A5mm X OD=18.1 C5mm X L=19.5B8Amm TO MATERIAL SPECN. PAPER CRAFT AMMN TO JSS 8135-017:2002, REF. 2010 DC. 5016-ME DT 16.03.11
C
Estab
4) GLAZED BOARD WASHER TO DRG.NO.FD672
Description : GLAZED BOARD WASHER TO DRG.NO.FD672()
Specification : DRG. PART NO.QX-175, DC NO.36103-A DT.29.03.96.
C
Estab
5) DISC TO DRG.NO.2-013535/53-00-482M
Description : DISC TO DRG.NO.2-013535/53-00-482M()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/ 14, DC NO. 36785-A, DT. 08.10.2001.
C
Estab
6) BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM
Description : BOARD GLAZED AMMN. 914.4MM X 304.8MM X 0.508MM()
Specification : SPECN. JSS:8135-13:2014 REV-3 DC.NO.5257 ME DTD.18.06.14.
C
Estab
7) DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA
Description : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA()
Specification : DISC 109MM DIA x 6MM THICK WAXED ITEM NO-06 TO DRG PART NO.ISV-483 GA. DCI 35983-A DT.29.07.95. MATERIAL: MILL BOARD TO JSS-9310-01-2014 REV-3 DC. 5290 ME DTD-16-12-14.
C
Estab
8) PACKING TO DRG
Description : PACKING TO DRG()
Specification : PACKING TO DRG.NO.4-24929/3 K33/001 DC NO. 35604-A, DT.11.10.93 [MATERIAL TO SPECN: IND/ME/645(a),DC NO.3754-ME, DT.12.12.02.]
C
Estab
9) DISC(WAXED)128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO
Description : DISC(WAXED)128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO()
Specification : DISC(WAXED) 128MM DIA x 6 MM THICK WAXED ITEM NO-5 TO PART NO.ISV-483 GA. DC-35983-A DT.29.07.95 MATERIAL MILL BOARD TO SPEC JSS- 9310-01-2014 REV-3 DC-5290-ME DT-16.12.14.
6) RING I.R.BUNG AS PER DRG.NO.MS.SK 11098/1 DATED 10.2.54 SPECIFICATION :-MD.I,MATL SPEC:K409 QUALB-FOR PRIMER D.C. MK.VIII.[20]()
Specification : MATL SPEC:K409 QUALB-FOR PRIMER D.C. MK.VIII.
C
Nonestab
7) RUBBER RING TO DRG NO ARDE/2165 DETAIL 5 DT.28-9-92, SPECN. ARDE/SPECN/423[60]()
Specification : ARDE/SPECN/423
C
Nonestab
8) SEALING RING TO DRG. NO. ARDE/1508 DET 7 DT 3-11-77. SPECN. ARDE/SPECN/221[60]()
Specification : ARDE/SPECN/221
C
Nonestab
9) RUBBER RING DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015[60]()
Specification : DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015
R
Nonestab
10) SHEET RUBBER EXPANDED TO SPECN. IND/ME/645 (b): 2014 DC:5282 -ME TYPE B SIZE 914.4 MM WIDE X 8 MM THICK[10]()
Specification : IND/ME/645
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 'O' RING 78X2 (2013436144)[20]()
Specification : 'O' RING 78X2 (2013436144)
E
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PROTECTIVE RING FOR COPPER BAND TO DRG. NO. SK-8337/A()
Specification : PROTECTIVE RING FOR COPPER BAND TO DRG. NO. SK-8337/A required for Mfr. of 105mm IFG Colour Smoke BE 3A, 105mm IFG SMK BE 3A(E) and 105mm IFG HE.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM()
Specification : PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B
Description : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B()
Specification : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B
C
Estab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) O RING 66 POINT 7 BY 1 POINT 2 TO OFAJ DRG NO FS2773B
Description : O RING 66 POINT 7 BY 1 POINT 2 TO OFAJ DRG NO FS2773B()
Specification : O RING 66.7 X 1.2 TO OFAJ DRG.NO.FS-2773B
C
Estab
Category : ddp
Grade : 1
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) O RING-1 TO DRG NO. AFK/SK-611-09 FOR 40 MM MGL AMMN.[00]()
Specification : O RING-1
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.[00]()
Specification : PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) O RING-1 TO DRG NO. AFK/SK-611-09 FOR 40 MM MGL AMMN.[00]()
Specification : O RING-1
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1568
MICROFINE BUSHINGS PRIVATE LTD
107, SIDCO INDUSTRIAL ESTATE 2ND LANE, PATTARAVAKKAM RLY STN RD CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 26250432 GSTIN : 33AACCM1179M1ZC
4) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]()
Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005
C
Nonestab
5) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
6) BIPOD ASSY OF LMG BELT FED[70]()
Specification : BIPOD ASSY OF LMG 7.62MM BELT FED as per drawing No.
1804 01 08 00 00 000 00DA
C
Nonestab
7) Pin Recoil Plate For Revolver Side Swing[70]()
Specification : Pin Recoil Plate For Revolver 0.32 Side Swing DRG. NO. RV-03/7 SW.
C
Nonestab
8) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA[70]()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
C
Nonestab
9) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
10) Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA[70]()
Specification : Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA
C
Nonestab
11) CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA[70]()
12) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FORJVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-04-02-14-000-00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
2) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
2) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Machining of CAP of 9MM Carbine in finished condition[70]()
Specification : Machining of CAP of 9MM Carbine in finished condition DS CAT No. 1005-000860 from I.C. Cap (Material will be supplied by SAF against B.G.)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MTG TRIPOD 7.62MM MGL 4A1[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) FRAME TRIGGER DS CAT NO. 1005-006602[70]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]()
Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Upper Feed Mechanism Slide 1005-006823[70]()
Specification : As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating
Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*
C
Nonestab
2) TRIGGER MECHANISM ASSEMBLY FOR LMG[70]()
Specification : TRIGGER MECHANISM ASSEMBLY FOR LMG 7.62 MM BELT FED DRG. NO. 1804 01 01 02 00 000 00DA.
C
Nonestab
3) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BRACKET DRG NO 9 A 621 02 002[91]()
Specification : FABRICATION OF BRACKET DRG. NO. 9-A-621.02.002 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
2) FABRICATION OF CASING DRG NO AO 18 02 001[91]()
Specification : FABRICATION OF CASING DRG NO. AO-18.02.001 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
3) Complete machining of remover 9 A 62109 001 from input material IC 7299000234 to be supplied by GSF IC 9140701109[91]()
Specification : Complete machining of remover (9-A-621.09.001) from input material I/C- 7299000234 to be supplied by GSF (I/C-9140701109)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
3) SPADE GRIP ASSEMBLY WITH SAFETY[74]()
Specification : SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN
E
Nonestab
4) BOLT ASSEMBLY[74]()
Specification : BOLT ASSEMBLY, BREECH OOW50BMG AS PER DRG NO: 6528322 OF M2HB GUN
E
Nonestab
5) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
6) Buffer Recoil Assembly[74]()
Specification : BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN
E
Nonestab
7) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
8) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
9) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHAFT MOTOR[74]()
Specification : SHAFT MOTOR Drg.No. 074305A-00
C
Nonestab
2) CASING MOTOR[74]()
Specification : CASING,MOTOR Drg.No. 074257B-02
C
Nonestab
3) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]()
Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025
C
Nonestab
4) SPADE GRIP ASSEMBLY WITH SAFETY[74]()
Specification : SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN
E
Nonestab
5) SHAFT SPLINE ELEVATION[74]()
Specification : SHAFT SPLINE, ELEVATION AS PER DRG 062815A-00 FOR ELEVATION ASSY OF SRCG.
C
Nonestab
6) SHAFT ELEVATION[74]()
Specification : SHAFT ELEVATION AS PER DRG 062817A-01 FOR ELEVATION ASSY OF SRCG.
R
Nonestab
7) ADAPTOR MAGAZINE[74]()
Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
8) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) MAGAZINE BOX ASSY[74]()
Specification : MAGAZINE BOX ASSY AS PER DRG.Y25676A-00 FOR MAGAZINE ASSY OF SRCG
C
Nonestab
10) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
11) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
2) Buffer Recoil Assembly[74]()
Specification : BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN
E
Nonestab
3) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
4) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
5) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
6) BOLT CENTERING[74]()
Specification : BOLT, CENTERING (View)020054A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
7) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
8) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
9) INSERT M4 ALTERED ITEM[74]()
Specification : INSERT M4, ALTERED ITEM (View)AS PER DRG 031682A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
10) BOLT GEAR TRAVERSE[74]()
Specification : BOLT GEAR, TRAVERSE (View)AS PER DRG 031669A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
11) BELLEVILLE LEVER TRAVERSE[74]()
Specification : BELLEVILLE, LEVER TRAVERSE (View)AS PER DRG 062346A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
12) BASE STOP B[74]()
Specification : BASE STOP B (View)AS PER DRG 019895A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
13) SCREW SPRING INTERFACE[74]()
Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
14) Rear Sight Assembly OOW50BMG as per Drawing No 12003047 of M2HB GUN[74]()
Specification : Rear Sight Assembly, OOW50BMG as per Drawing No.: 12003047 of M2HB GUN
C
Nonestab
15) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
16) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE TO DRG NO CTM 166[70]()
Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C
C
Nonestab
2) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]()
Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Gun and Shell Factory
Name
Specification
Use
Status
1) COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981()
Specification : COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) KEY[74]()
Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) COVER SOLENOID 1[74]()
Specification : COVER SOLENOID 1 (VIEW) AS PER DRG NO.065281A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
3) SCREW HEAD COCKING[74]()
Specification : SCREW HEAD COCKING AS PER DRG NO.066628A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
4) GUIDE RECOIL REAR[74]()
Specification : GUIDE RECOIL, REAR AS PER DRG NO.063796A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
5) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
6) COVER SOLENOID 2[74]()
Specification : COVER SOLENOID 2 AS PER DRG NO.065283A-00 FOR SOLENOI SHOT ASSY OF SRCG
C
Nonestab
7) KEY AS PER DRG NO 074811A 00[74]()
Specification : KEY (View) AS PER DRG NO.074811A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
8) COVER FRONT PEDESTAL[74]()
Specification : COVER FRONT PEDESTAL AS PER.Y25684A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) ARM COVER LEFT[74]()
Specification : ARM COVER LEFT (View) AS PER.Y25685A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
10) ARM COVER RIGHT[74]()
Specification : ARM COVER RIGHT (View) AS PER.DGRNO.Y25686A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
11) BRACKET TOP COVER[74]()
Specification : BRACKET TOP COVER (View) AS PER.DRG.NO.Y25687A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
12) BRACKET BASKET RIGHT WELD[74]()
Specification : BRACKET, BASKET,RIGHT, WELD/Y19378A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
13) BRACKET BASKET LEFT WELD[74]()
Specification : BRACKET, BASKET, LEFT, WELD/Y19376A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
14) CASE DESICCANT[74]()
Specification : CASE, DESICCANT/Y17736A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()
Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
2) BOLT HOUSING[74]()
Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
3) SHAFT ENCODER CASING[74]()
Specification : SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
4) BUMPER ARM[74]()
Specification : BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
5) BUMPER ARM LOCK[74]()
Specification : BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
6) BLOCKING ELEMENT[74]()
Specification : BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
7) BRACKET ASSY 1[74]()
Specification : BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG
C
Nonestab
8) SECTOR BACK COVER FNSH[74]()
Specification : SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
9) SECTOR FRONT COVER FNSH[74]()
Specification : SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
10) ADAPTOR SPRING[74]()
Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG
C
Nonestab
11) LIMITER EXTERNAL[74]()
Specification : LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
12) WASHER FLAT CRES M5 A4[74]()
Specification : WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
13) SUPPORT ELEVATION DRIVE[74]()
Specification : SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
14) BOLT GEAR ELEVATION[74]()
Specification : BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
15) BRACKET ASSY2[74]()
Specification : BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG
C
Nonestab
16) SPACER OIL RETAINER[74]()
Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
17) SUPPORT GEAR TRAVERSE[74]()
Specification : SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
18) ANGLE LIMITER RIGHT[74]()
Specification : ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
19) ANGLE LIMITER LEFT[74]()
Specification : ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
20) BASE STOP A[74]()
Specification : BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
21) COVER SHAFT ENCODER[74]()
Specification : COVER SHAFT ENCODER/ DRG NO.Y25635A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun
C
Nonestab
2) Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun[74]()
Specification : Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun
C
Nonestab
3) Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun[74]()
Specification : Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun
C
Nonestab
4) Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun[74]()
Specification : Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun
C
Nonestab
5) Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun[74]()
Specification : Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun
C
Nonestab
6) Slide Sear OOW50BMG as per Drg No 5351220 of M2HB Gun[74]()
Specification : Slide Sear OOW50BMG as per Drg No 5351220 of M2HB Gun
C
Nonestab
7) Sear OOW50BMG as per Drg No 5504067 of M2HB Gun[74]()
Specification : Sear OOW50BMG as per Drg No 5504067 of M2HB Gun
C
Nonestab
8) Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun[74]()
Specification : Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun
C
Nonestab
9) Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun[74]()
Specification : Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
2) PISTON INNER[74]()
Specification : PISTON INNER (View) AS PER DRG NO.074263A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
3) COVER MOTOR[74]()
Specification : COVER, MOTOR AS PER DRG NO.Y18725A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
4) SPACER ROTOR[74]()
Specification : SPACER ROTOR (View) AS PER DRG NO.074312A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
5) STOPPER[74]()
Specification : STOPPER (View) AS PER DRG NO.074266A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
6) NUT[74]()
Specification : NUT (View) AS PER DRG NO.074267A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
7) WASHER SAFETY[74]()
Specification : WASHER SAFETY (View) AS PER DRG NO.074265A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
8) NUT SOLENOID[74]()
Specification : NUT SOLENOID AS PER DRG NO.065454A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
9) Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun[74]()
Specification : Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun
C
Nonestab
10) Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun[74]()
Specification : Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun
C
Nonestab
11) Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun[74]()
Specification : Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun
C
Nonestab
12) Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun[74]()
Specification : Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun
C
Nonestab
13) Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun[74]()
Specification : Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun
C
Nonestab
14) Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun[74]()
Specification : Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun
C
Nonestab
15) Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun[74]()
Specification : Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun
C
Nonestab
16) Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun[74]()
Specification : Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun
C
Nonestab
17) Screw OOW50BMG as per Drg No 13018132 of M2HB Gun[74]()
Specification : Screw OOW50BMG as per Drg No 13018132 of M2HB Gun
C
Nonestab
18) Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun[74]()
Specification : Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun
C
Nonestab
19) Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun
C
Nonestab
20) Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun[74]()
Specification : Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) WASHER ELASTOMER[74]()
Specification : WASHER ELASTOMER (View) AS PER DRG NO.Y01876A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) HOUSING CONNECTOR[74]()
Specification : HOUSING CONNECTOR(VIEW) AS PER DRG NO.074253A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
3) CAP ASSY[74]()
Specification : CAP ASSY (VIEW) AS PER DRG NO.Y18784A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
4) SPINDLE ALTERED[74]()
Specification : SPINDLE, ALTERED (View) AS PER DRG NO.074260A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
5) SCREW M10[74]()
Specification : SCREW M10 (View) AS PER DRG NO.075871A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
6) BRACKET[74]()
Specification : BRACKET AS PER DRG NO.Y17473A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
7) SCREW SHANK[74]()
Specification : SCREW SHANK, AS PER DRG NO.Y00964A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
8) BUSHING GUIDE FRONT[74]()
Specification : BUSHING GUIDE, FRONT AS PER DRG NO.063911A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
9) BUSHING THREAD REAR[74]()
Specification : BUSHING THREAD REAR 1 (View) AS PER DRG NO.077853A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
10) BASE LIMITER[74]()
Specification : BASE LIMITER AS PER DRG NO.Y17478A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
11) ROD LIMITER[74]()
Specification : ROD LIMITER (View) AS PER DRG NO.066426A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
12) PLUG SPRING[74]()
Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
13) BODY EXTERNAL WELDED[74]()
Specification : BODY EXTERNAL WELDED (VIEW)064706A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
14) LEVER TRIGGER[74]()
Specification : LEVER TRIGGER (View) AS PER DRG NO.Y03740A-00 FOR STAND WEAPON ASSY OF SRCG
R
Nonestab
15) HEAD COCKING 1[74]()
Specification : HEAD COCKING 1(VIEW) AS PER DRG NO.066237A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INLET ASSY[74]()
Specification : INLET ASSY (View) AS PER DRG.080780A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPACER[74]()
Specification : SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) SPRING FLAT[74]()
Specification : SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
3) WRENCH[74]()
Specification : WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
4) SLIDER LINKS M9 WELDMENT[74]()
Specification : SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
C
Nonestab
5) WASHER LOCK TAB M4[74]()
Specification : WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
6) BLOCK STORAGE WELDED[74]()
Specification : BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
2) SPACER BEARING[74]()
Specification : SPACER BEARING (View)074311A-00 FOR COCKING MECH. ASSY OF SRCG..
C
Nonestab
3) EXTENSION SOLENOID[74]()
Specification : EXTENSION SOLENOID/Y17398A-00 FOR SOLENOID SHOT ASSY OF SRCG..
C
Nonestab
4) BUSHING THREAD FRONT 1[74]()
Specification : BUSHING THREAD FRONT 1 (View)077851A-00 FOR CRADLE WEAPON ASSY OF
SRCG.
C
Nonestab
5) BUSHING REAR[74]()
Specification : BUSHING, REAR/Y18946A-00 FOR CRADLE WEAPON ASSY OF SRCG.
C
Nonestab
6) BUSHING FRONT 1[74]()
Specification : BUSHING FRONT 1 (View)077855A-00 FOR CRADLE WEAPON ASSY OF SRCG.
C
Nonestab
7) PIN KEY[74]()
Specification : PIN KEY (View)066425A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
8) SLEEVE LIMITER[74]()
Specification : SLEEVE LIMITER (View)066427A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
9) BASE BLOCK[74]()
Specification : BASE BLOCK/065286A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
10) PUSHER TRIGGER[74]()
Specification : PUSHER TRIGGER (View)Y05288A-01 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
11) BUSHING PIN[74]()
Specification : BUSHING PIN/065453A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
12) SCREW SPECIAL[74]()
Specification : SCREW SPECIAL/065603A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
13) AXIS 1[74]()
Specification : AXIS 1/065289A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) CLAMP TO 6201080003[62]()
Specification : CLAMP TO DRG NO. 172.80.001CB-ACB
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
2) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE[00]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE
C
Nonestab
3) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL
C
Nonestab
4) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
5) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
7) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
8) MACHINING MILLING AND GRINDING OF ANTI REBOUND C1048 TO DRG NO TEND 2174 STAR WITH FIRMS MATERIAL[70]()
Specification : As per TE
C
Nonestab
9) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA
C
Nonestab
2) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
4) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
5) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()
Specification : As per TE
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Receiver Body for 9X19 mm Machine Pistol[70]()
Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing
C
Nonestab
2) Barrel Mount for 9X19 mm Machine Pistol[70]()
Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing
R
Nonestab
3) Wheel Rear Sight for 9X19 mm Machine Pistol[70]()
Specification : Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA
C
Nonestab
4) Locking Rear Block for 9X19 mm Machine Pistol[70]()
Specification : Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
C
Nonestab
5) RECEIVER FOR LMG BELT FED[70]()
Specification : RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED
C
Nonestab
6) Rear sight for 9X19 mm Machine Pistol[70]()
Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA
C
Nonestab
7) Housing Fore Sight for 9X19 mm Machine Pistol[70]()
Specification : Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) Bracket Bipod drg no 1005 000061 for LMG 5 56mm[70]()
Specification : AS PER DRG.
C
Nonestab
2) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
C
Nonestab
3) BLOCK GAS IN FINISH CONDITION FOR MAG[70]()
Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)
7) Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 003 00DA[70]()
Specification : Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 003 00DA
C
Nonestab
8) RECEIVER FOR GPMG WITHOUT HEATTREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
C
Nonestab
Category :
Grade : Grade III
Size :
M
1570
Central Institute of Plastics Engineering & Technology
T.V.K. Industrial Estate, Chennai, Tamil Nadu
PIN1 : 600032
Phone No. : 044-22254707 GSTIN : 06AAAAC0606R1ZT
3) FEMALE CAP (PUSH FIT) AS PER O.E.F.C. DRG.NO. SK - 914()
AS PER REQUIREMENT & SPECIFICATION
R
Category : P
Grade : II
Size :
S
1) Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) PLASTIC CONTAINER FOR AMK339 AS PER HAPP DRAWING NO.H AMK 125 1 126 REV 0[14]()
Specification : HIGH DENSITY POLYTHENE TO SPEC JSS 9330-03:2007(TYPE 2) IN ORANGE COLOUR, (GASKET)-NEOPRENE RUBBER TO SPEC IND/ME/884 (PROV), (CUSHION PAD BOTTOM & TOP)-SPONGE RUBBER TO SPEC IND/ME/645 (PROV)
E
Nonestab
Category : p
Grade : Grade I
Size :
M
1571
Vinay Traders
Julius Arc, Near Sadoday Palace, Gaddi godam, kamptee road, Nagpur Maharashtra
PIN1 : 440001
Phone No. : 2548366
1) CALIBRATIOPN OF BOW DYNAMO METER UTM[CAPACITY UP TO 100KN OF UTM]()
CAPACITY UP TO 100KN OF UTM
E
ESTAB
2) DENSITY CALIBRATION OF HA BLANKS[STANDARD BLANKOF DENSITY 18.10GM / CC]()
STANDARD BLANKOF DENSITY 18.10GM / CC
E
ESTAB
3) ULTROSONIC CALIBRATION OF HA BLANK[DENSITY 18.10GM /CC]()
DENSITY 18.10GM /CC
E
ESTABLISHED
Category : S
Grade : I
Size :
O
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL
Description : FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL()
Specification : FABRICATION OF DRUM/BARREL TO DRG NO 9-A-621.06.035 FROM GSF SUPPLIED MATERIAL
C
Estab
Category : ddp
Grade : 3
Size :
L
1574
R V INDUSTRIALS
SF NO.:616/1E, CHETTIPALAYAM ROAD, EACHANARI POST, COIMBATORE, TAMIL NADU
PIN1 : 641021
Phone No. : 0422-2974641, 9842216641 GSTIN : 33AACFR3326A1ZX
1) ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG NO ADRDE 1408 FOR AN 32 PLATFORM 6245001408[62]()
Specification : ASSEMBLY TENSIONING DEVICE WITH PIN TO DRG.NO.ADRDE-1408 FOR AN-32 PLATFORM.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) DOME AS PER DRDL DRG NO 542 08 02 01 01 01[00]()
Specification : DOME AS PER DRDL DRG.NO.542 08 02 01 01 01
C
Estab
2) PLATE MOVEMENT ALTERNATIVE WITH SET BACK MECHANISM TO CQA A DRG NO 13023 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : PLATE MOVEMENT ALTERNATIVE WITH SET BACK MECHANISM TO CQA (A) DRG. NO. 13023-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
C
Estab
3) PLASTIC CONTAINER TO OFAJ DRG NO FS 3045 FOR FIN ASSY OF 84 MM HEAT 751[00]()
Specification : PLASTIC CONTAINER TO OFAJ DRG NO. FS-3045 FOR FIN ASSY OF 84 MM HEAT 751
C
Estab
4) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]()
Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710
C
Estab
5) COMBINED SAFETY TO OFAJ DRG NO FS 3067 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : COMBINED SAFETY TO OFAJ DRG NO. FS-3067 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
6) TOOTHED SEGMENT WITH 12 TEETH MS 106 107 TO OFAJ DRG NO FS 3066 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : TOOTHED SEGMENT WITH 12 TEETH MS 106/107 TO OFAJ DRG NO. FS-3066 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
7) PLATE NO 1 TO OFAJ DRG NO FS 3123 FOR FUZE SYSTEM OF 84 MM SMOKE 469C[00]()
Specification : PLATE NO. 1 TO OFAJ DRG NO. FS-3123 FOR FUZE SYSTEM OF 84 MM SMOKE 469C
C
Estab
8) SPECIAL WRENCH CAT NO 14 5120 002903 TO DRG NO 24218[00]()
Specification : SPECIAL WRENCH CAT NO 14 5120 002903 TO DRG NO 24218
R
Estab
9) GAUGE FOR COUPLING Cat Part No 14 5120000016 To Drg No 23706[00]()
Specification : GAUGE FOR COUPLING Cat Part No 14 5120000016 To Drg No 23706
R
Estab
Category :
Grade : Grade III
Size :
S
1576
DEVENDRA AUTOCOM PRIVATE LIMITED
Devendra Autocom Private Limited
#35, B/2, Second Main Road,
Ambattur Industrial Estate,
Chennai-600058 Second Main Road Chennai Tamil Nadu
PIN1 : 600058
Phone No. : 26258127 GSTIN : 33AAACD1193N1ZN
