9) RELEASE RING III FRICTION CLUTCH TO 3906401065[39]()
Specification : 172.40.225/F
R
Nonestab
10) WHEEL GEAR L H TO 3906401105[39]()
Specification : 175.40.005/F
C
Nonestab
11) PLANET PINION TO 3906401164[39]()
Specification : 175.40.138/F
C
Nonestab
12) PLANET IV TRAIN TO 3906401166[39]()
Specification : 175.40.140/F
R
Nonestab
13) DISC THRUST TO 3906401197[39]()
Specification : 432.40.128/F
R
Nonestab
14) FLANGE DRIVING TO 3906402053[39]()
Specification : 175.41.075/F
C
Nonestab
15) COUPLING TO 3906402060[39]()
Specification : 175.41.084/F
R
Nonestab
16) FLANGE DRIVEN TO 3906402064[39]()
Specification : 175.41.088/F
C
Nonestab
17) RING LABYRINTH TO 3906411024[39]()
Specification : 172.51.017/F
C
Nonestab
18) RING TO 3906411026[39]()
Specification : 172.51.020/F
R
Nonestab
19) FLANGE DRAIN HOLE TO 3906802077[39]()
Specification : 175.03.030/F
R
Nonestab
20) COVER TO 3996406044[39]()
Specification : 172.45.036-1/F
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING FOR GUIDE TRACK T 90 6120100103[61]()
Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION
C
Nonestab
2) FORGING FOR CLAMP TRACK T 90 L F NO 6120100102[61]()
Specification : FORGING FOR "CLAMP" TO DRAWING NUMBER 172.55.025/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION
C
Nonestab
3) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]()
Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION.
C
Nonestab
4) WASHER TO DRG NO 219 35 186 TRACK T 90 L F NO 6120100106[61]()
Specification : WASHER TO DRAWING NUMBER 219.35.186 {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 19903-74,GOST 1577-93,GOST 14959-79,520 TY 1 PROCESS SHEETS-COLD STAMPING, ISOTHERMAL HARDENING.
C
Nonestab
5) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]()
Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED]
C
Nonestab
6) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
7) LUG HOUSING ASSEMBLY MACHINED 450 KG L F NO 6230100104[62]()
8) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
9) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
10) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]()
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED).
C
Nonestab
11) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) ROLLING RING ASSY 250 KG L F NO 6241100114[62]()
Specification : ROLLING RING ASSY. TO DRG. No. ARDE 9501-01 DET 18 (WITHOUT PHOSPHATED) . [DRG. ENCLOSED]
C
Nonestab
2) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]()
Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS
C
Nonestab
3) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]()
Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S
C
Nonestab
4) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]()
Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS
C
Nonestab
5) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
6) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
7) ROLLING RING GENERAL ARRANGEMENT FOR 450 KG L F NO 6241100118[62]()
Specification : (1)RING WELDING ASSY(TWO QUADRANT) AS PER DRAWING NO.ARDE-2122-18 SHTS 6 SHTS. NO.1,QTY-04 NOS. (2)COVER PLATE AS PER DRAWING NO.ARDE 2122-19,QTY-01 NOS. (3)CLAMPING PLATE AS PER DRAWING NO.ARDE-2122-20,QTY-01 NOS. (4)SPRING WASHER M 16 T
C
Nonestab
8) ROLLING RING ASSY FOR 250 KG L F NO 6241100117[62]()
Specification : (1)RING WELDING ASSY AS PER DRAWING ARDE-9501-01-19 SHTS 3HT. NO.1,QTY.-04 NOS (2)CLAMPING PLATE AS PER DRAWING NO. ARDE 9501-01-20 ,QTY.-02 NOS. (3)HEX HEAD SCREW M8X1.25P-35LONG,4.8-IS:1363(PART-2):2000,MAKE:UNBRAKO/ TVS/LPS QTY-08 N
1) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]()
Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT
R
Nonestab
2) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032[01]()
Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE
Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED
R
Nonestab
Category :
Grade : Grade III
Size :
L
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030152 ROLLED HOMOGENOUS ARMOUR PLATE RHA OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4[01]()
Specification : ROLLED HOMOGENOUS ARMOUR PLATE (RHA) OF SIZE 1830 X 1830 X 230 MM AS PER DEF STAN 95 13 ISSUE 4
Specification : HOMOGENEOUS ARMOUR PLATE SIZE 1000 X 2000 X 150 MM THICK TO SPECIFICATION ARMOX-12560(MIL-A-12560 H).
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Katni
Name
Specification
Use
Status
1) C R G M STRIP FOR AK47 KF25 ITEM CODE 0710160157[90]()
Specification : C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO
R
Estab
2) C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METE
R
Estab
3) STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX
R
Estab
4) CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005[90]()
Specification : CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATE
R
Estab
5) CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015[90]()
Specification : CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-
R
Estab
6) CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001[90]()
Specification : CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX.
Specification : BRASS STRIP 22+/-0.50 MM WIDE X 0.7 +0.02/-0.03 MM THICK IN COILS OF CONTINUOUS LENGTH WEIGHING 10 TO 15 KG AND INSIDE DIA. OF COIL 100 TO 150 MM TO SPECN BS-2870 CZ 106 1/4 HARD
R
Nonestab
2) BRASS STRIP 25 4X0 63 MM LF 0717560949[07]()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
R
Nonestab
3) BRASS STRIP 102 X 3 66 MM BS2871 CZ126 LF 0717560694[07]()
Specification : BRASS STRIP 102 +/-0.5 MM WIDE X 3.66 +/-0.05 MM THICK IN LENGTH OF 2.5 TO 3 METERS TO SPECN:BS2871 PART 2:1972:CZ126 CONDITION M (STRESS RELIEVED) OR JSS 9535-02:2008(REVISION NO.3)(ANNEALED).
1) C R G M STRIP FOR AK47 KF25 ITEM CODE 0710160157[90]()
Specification : C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO
R
Estab
2) C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METER
R
Estab
3) STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX.
R
Estab
4) CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005[90]()
Specification : CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATES
R
Estab
5) CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015[90]()
Specification : CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-4
R
Estab
6) CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001[90]()
Specification : CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX.
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) BRASS STRIP 25 4X0 63 MM LF 0717560949
Description : BRASS STRIP 25 4X0 63 MM LF 0717560949()
Specification : BRASS STRIP 25.4+/-0.50mm WIDEx0.63+/-0.038mm THICK(1"x24BG)TO SPECN:JSS-9535-02-2008 (Rev. NO-3),(i)GRAIN SIZE 0.065MMMax.(ii)STRIP TO BE IN ANNEALED CONDITION HAVING HARDNEES BETWEEN 70 - 90 VPN, (iii)MAT TO BE SUPPLIED IN COILS OF ID 1
Specification : White Colour To Specn.No.CS-5301-B
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017
Description : WAX PARAFFIN SPECIAL JSS 9160 06 LF 1020871017()
Specification : PARAFFIN WAX SPECIAL TO SPECN:-JSS-9160-06 :2002 (REV.NO.2) (reaffirmed 2011) DC NO.-5047-ME.DT.15/12/2011
R
Nonestab
Category : p
Grade : 3
Size :
S
1628
B S ENGINEERING CORPORATION
117, RAJA DINENDRA STREET, RAJA DINENDRA STREET, KOLKATA West Bengal
PIN1 : 700004
Phone No. : 25558976 GSTIN :
19ALSPS5380C1ZK
1) Body with Insulation to GSF Sketch No OTF DD 023 for Fuze B 15[62]()
Specification : Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) MOULDING ASSEMBLY OF BODY WITH CONTACT[62]()
Specification : MOULDING ASSEMBLY OF BODY WITH CONTACT TO DET. NO. C 1-2 OF DRG. NO. 3-024044 IN F/C (TO SK. NO. OTF/PG/004, OTF/PG/008, OTF/PG/009, OTF/PG/010) OTF/PG/011 DC 35811-A, DT. 19/9/94
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) BODY SUB ASSY DET Cd 3 TO DRG NO 3 022859 TO SK NO OTF SE 010 IN F C[62]()
1) 6141855521 FIRING DEVICE FOR MINE AP 1B DIR[61]()
Specification : FIRING DEVICE, ANTI- PERSONNEL MINE 1B FOR MINE AP 1ADIRECTIONAL (T2/1345-000038) DRAWING NO. CQA(I)-393 &SPECIFICATION NO. CQA(I)-266
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6355000120 EMPTY HARDWARE FOR INFLUENCE MINE[63]()
Specification : EMPTY HARDWARE FOR INFLUENCE MINE MK-II TO ARDE DRG.NO.970700 01 00 01 000 00TB AND
SPECIFICATION NO.S-I/CM/IMMK II/ATP/01.
C
Nonestab
2) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY[63]()
Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK
1) 6141855520 TESTING DEVICE FOR MINE AP 1B DIR[61]()
Specification : TESTING DEVICE CIRCUIT CONTINUITY 1B (T2/1345-000429) TODRG. NO. CQA(I)-408 FOR MINE AP 1A/1B DIRECTIONAL & SPECN.NO. CQA (I)-265.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) CASE HEMK 1 MODIFIED SER[65]()
Specification : CASE HEMK-1 (MODIFIED)L/A WOOD TO DRG.NO.IND/ME/29 DC NO 3604-ME DT.13.12.99.
R
Nonestab
2) WOODEN BOX FOR BPC 4W 20[65]()
Specification : WOODEN BOX FOR PROP BPC (4W-20) AS PER DRAWING ATTACHED SPECIFICATION –DRG.NO.-NAI(J) 245
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) WOODEN BOX FOR BPC (5b-84)[65]()
Specification : AS PER DRG. NO. NASK 829 (P) DTD. 16/07/2003(OFBA/RK/422) AMENDED ON DTD. 08/05/2008. WOOD AS PER SPECN. NO. IA 948.
R
Nonestab
2) UNIT LOAD 155 CHARGE M4 A2[40]()
Specification : AS PER DRG. NO. 13646-4-0 DC NO. 35707-A, AS PER CFA DRG. NO. 13-S/003,13-S/003/1,13-S/003/2, 13-S/003/3, 13-S/003/4, 13-S/003/5 AND 13-S/003/6
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774300 PACKING BOX FOR RIGID CUTTING CHARGE 85 MM[65]()
Specification : PACKING BOX FOR RIGID CUTTING CHARGE 85 EMPTY TO DRG NO HE/CAST/079 DET.1 TO17 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
3) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
4) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
5) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6191700063 PACKING BOX FOR ASSY OF PINAKA RKT[61]()
Specification : PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6419000074 PIEZO GENERATOR FOR FUZE B 15 EMPTY[64]()
Specification : PIEZO GENERATOR TO DRG.NO.3-024044,3B15,DC 34669-A FOR FUZEB-15 REQUIRED FOR ASSEMBLY & FILLING OF 125 MM HEAT.SUBJECTTO ACCEPTANCE IN EMPTY FILLED PROOF AS PER CQA(A)PROOF SCHEDULE NO.FZ/103(E)(PROV).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774100 PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO HE CAST 086 DET 1 TO 10 EXCLUDING 90MM SHAPED CHARGE SET OF LEGS QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90MM CONSISTING OF10 COMPONENTS TO DRG NO. HE/CAST 086 DET 1 TO 10(EXCLUDING 90MM SHAPED CHARGE & SET OF LEGS) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)[61]()
Specification : FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN.NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002.[REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY)TO IQX 86A DC NO.35879-A DT.20.12.94 (2) H
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SENSING ELEMENT (EMPTY ASSEMBLY)[61]()
Specification : SENSING ELEMENT (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-39A DC 35916 A DT.21.02.95 SPECN.CQA(A)1817(t)DC 37096-A,DT.06.03.2007 WITH (1) DUST CUP DRG PT NO.ITX-283DC 35597-A DT.06.10.93 = 01 NO.(2) FASTNER FOR SAFETY PINCORD DRG.NO.ITX 284 DC 35
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774200 PACKING BOX FOR SHAPED CHARGE 145MM[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6356000009 FRP PACKAGE BOX FOR INFL MINE MK II[63]()
1) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PIEZO ELECTRIC GENERATOR ASSY LF 9911357853
Description : PIEZO ELECTRIC GENERATOR ASSY LF 9911357853()
Specification : PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203.
R
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BOX-C 27-A (SER)TIN PLATE[65]()
Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Box Cartridge LTPE Wood[65]()
Specification : BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.
R
Nonestab
2) BOX-C 27-A (SER)TIN PLATE[65]()
Specification : FOR PACKAGE, AMMUNITION, 92A, DRG. NO. OFBA/NCP/209 DT. 25.11.68 AMENDED ON DT. 15.10.08/TRACED FROM CIA/AMMN/502 PART NO. ISV 353A, DC NO. 35389-A DTD. 06.10.92 SPECN. NO. IA- 1163 (H) DC(I) 34605-A
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bhandara
Name
Specification
Use
Status
1) Box Cartridge LTPE Wood[65]()
Specification : BOX CARTRIDGE LTPE WOOD FOR PACKING 10 KGS CARTRIDGES LTPE 100 GMS(IN CARTONS) AS PER DRG. NO. OFBA/PE/12.DT-08/05/2001 AMENDED ON DT.23.07.2002.
R
Nonestab
2) WOODEN BOX FOR SPECIAL METAL CONTAINER[65]()
Specification : DRG. NO. OFBA/MPC/75. ALL THE ACCEPTANCE AND INSPECTION/QUALITY CRITERIA SHOULD BE AS PER TU 34E-2015
R
Nonestab
Category :
Grade : Grade III
Size :
S
1633
HEAVY METAL AND TUBES (INDIA) PVT. LTD.
101, Bileshwarpura, Ta:Kalol,
Dist: Gandhinagar, Gujarat – 382729, INDIA
Gujarat Gandhinagar Gujarat
PIN1 : 382729
Phone No. : 234139 GSTIN :
24AACCH0904K1ZX
Specification : SEAMLESS STEEL TUBE (PIPE)O/D 12+/-0.1MM X 10+/-0.1MM I/D STRAIGHT LENGTH OF 2.5 TO 3.00 MTRS TO SPECN:IS-3074-2005(SECOND REV.) AMDTS.NO.1 OF FEB.2006 AND NO.2 OF JUNE 2010GR-CDS-2 AS DRAWN & NORMALISED WITH Rm 35kg/Sqr.mm, Min Ag24% MIN
1) Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA[70]()
Specification : Lock plate angle lever feed TO DSCAT NO 1005 007449 A 6039 DC NO 26985 SA for DC Latest issue to be followed with firms material required for 12.7mm AD Gun LF No 7013998063
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
2) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()
Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030
C
Nonestab
3) MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
4) MANUFACTURING AND SUPPLY OF COVER COMBINATION ASSY AS PER DRAWING NUMBER 30P 1500[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
5) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
6) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CLAMP HANDLE SUB ASSY TO DRG NO 30P 1310 REQD FOR 40mm MGL[70]()
Specification : CLAMP HANDLE SUB ASSY. TO DRG. NO. 30P 1310 REQD. FOR 40mm MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310[70]()
Specification : MANUFACTURING AND SUPPLY CLAMP HANDLE SUB ASSY AS PER DRG NO 33P 1310
C
Nonestab
2) 20MM BOLT LEVER 44P 03002[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
3) 14 5MM BOLT LEVER 44P 14014[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
4) CLAMP NUT 44P 04007[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
5) 44P03010 20MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT SPECIFICATIONS
R
Nonestab
6) 44P14006 14 5MM HAMMER CAM PLATE[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
7) HAMMER TO DRG NO 44P06013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
8) 20MM FIRING PIN TO DRG NO 44P03013[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
9) 14 5MM FIRING PIN TO DRG NO 44P14009[70]()
Specification : AS PER OFT REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
3) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIVOT PIN AS PER DRG NO K 4009 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 4009 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HINGE PIN AS PER DRG No K 4015 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : SUPPLY OF HINGE PIN AS PER DRG No K-4015 WITH FIRM'S MATERIAL REQUIRED FOR TAR
C
Nonestab
2) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) SMOKE GENERATING SYSTEM TO 6201037001[62]()
Specification : SMOKE GENERATING SYSTEM TO DRG NO. 188.37SP-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) SMOKE GENERATING SYSTEM TO 6206310002[62]()
Specification : SMOKE GENERATING SYSTEM TO DRG NO. 175.37CB-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) ELECTRIC SWITCH OF SMOKE GENERATING EQUIPMENT ASSY TO 6201037003[62]()
Specification : ELECTRIC SWITCH OF SMOKE GENERATING EQUIPMENT ASSY TO DRG NO.188.37.010CBCB
1) Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo[21]()
Specification : Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo
S/2594/CCD Army Logo/TC-15 & Approved sample
E
Estab
2) FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED[21]()
Specification : FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED)
SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE
E
Estab
3) Fabrication of Cap Glacier[21]()
Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.
E
Estab
4) FABRICATION OF SOCKS MENS WOOL DARK OG[21]()
Specification : FABRICATION OF SOCKS MEN'S WOOL DARK OG
Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANN
E
Estab
5) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
6) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012[21]()
Specification : Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012 Specification :- IND/TC/4552 (m) & Approved Sample
E
Estab
7) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()
Specification : Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
E
Estab
8) Fabrication of Bag Kit Universal Mark II[21]()
Specification : Fabrication of Bag Kit Universal (Mark-II) Specification - Provisional Specification no. S/2532/BAG KIT UNIVERSAL (OG)/TC-6(a)
E
Estab
9) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
10) FABRICATION OF VARIOUS OPERATION OF JERSEY MENS WOOL V NECK DARK OG ITEM[J0]()
Specification : FABRICATION OF VARIOUS OPERATION OF JERSEY MENS WOOL V NECK DARK OG ITEM
FABRICATION OF VARIOUS OPERATION (200031-KNITTING, 200033-WASHING, 200034-PRESSING, 200035-CUTTING, 200008-TAILOR SKILLED HAND-I, 200001-TAILOR SKILLED MACHINE-I,
E
Estab
11) Fabrication of Ground Sheet TPO OG[21]()
Specification : Fabrication of Ground Sheet TPO OG
Specification - JSS 8305-35:2014
R
Estab
12) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
13) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
14) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
E
Estab
15) FABRICATION OF ECAD PARACHUTE COMPLETE WITH PACK[21]()
Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33) POLYESTER AND COTTON & 100% POLYESTER TAPE COMPLETE WITH PACK.
AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT. NO. 3 AND AS PER SAMPLE HELD WITH OCFS
1) SET OF IGNITER TOP AND BOTTOM CL BAG LF 9911358667[99]()
Specification : SET OF IGNITER TOP & BOTTOM CLOTH BAG (EMPTY)- SET CONSIST OF (I) IGNITER TOP AS PER HEMRL DRG NO.1126 (ii) IGNITER BOTTOM AS PER HEMRL DRG NO.1127.
C
Nonestab
2) CLOTH BAG EMPTY AS PER HEMRL DRG No 1128 LF NUMBER 9911358666[99]()
Specification : CLOTH BAG (EMPTY) AS PER HEMRL DRG.No.1128.
C
Nonestab
3) PROPELLANT BAG EMPTY FOR 125MM FSAPDS LF NUMBER 9911358720[99]()
Specification : PROPELLANT BAG EMPTY FOR 125MM FSAPDS PRACTICE AMMUNITION AS PER DRG NO.ISX 411
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of Pack cover of ECAD Para 8.5M()
Specification : As per Specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of Shirt Angola[99]()
Specification : As per specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of Bag Kit Universal MK-2()
Specification : As per Specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) Fabrication of ECAD SD Parachute 8.5M CWP()
Specification : As per Specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1Ordnance Equipment Factory Hazaratpur
Name
Specification
Use
Status
1) FABRICATION OF JACKET AND TROUSER COMBAT DISRUPTIVE WITH INDIAN ARMY LOGO 220 GSM[99]()
Specification : As per specification
E
Nonestab
Category :
Grade : Grade III
Size :
SS
1Opto Electronic Factory
Name
Specification
Use
Status
1) TORQUE GENERATOR STATOR 800 AS PER SPECIFICATION IUMK684 222 001 LF 7440201005[74]()
Specification : TORQUE GENERATOR STATOR, 800 AS PER SPECIFICATION IUMK684.222.001 (LF-7440201005)
C
Nonestab
2) IGNITION BLOCK AS PER DRAWING NO AL6730560 LF7441120453[74]()
Specification : IGNITION BLOCK AS PER DRAWING NO AL6.730.560
LF-7441120453
C
Nonestab
3) LF 7440201006 Torque Generator Stator 1000 For Platform with Arrester of Gryo Stabilizer To Drg IUMK 684 222 002[74]()
Specification : LF 7440201006 Torque Generator Stator 1000 For Platform with Arrester of Gryo Stabilizer To Drg. No. IUMK.684.222.002
C
Nonestab
Category :
Grade : Grade III
Size :
SS
1638
DAYA INDUSTRIES
133/147 O BLOCK KIDWAI NAGAR KANPUR Uttar Pradesh
PIN1 : 208011
Phone No. : 2641677 GSTIN :
09AALFD1494Q1ZN
Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()
Specification : Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo
Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo[21]()
Specification : Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo
S/2594/CCD Army Logo/TC-15 & Approved sample
E
Estab
2) FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED[21]()
Specification : FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED)
SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE
E
Estab
3) Fabrication of Cap Glacier[21]()
Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.
E
Estab
4) Fabrication of Jacket and Trousers Combat PC Dis with Indian Army Logo 220 GSM in set[21]()
Specification : OCFAv/Garment/001(c) & OCFAv/Garment/002(c)
Specification "FABRICATION OF JACKET & TROUSERS COMBAT PC DIS WITH INDIAN ARMY LOGO 220 GSM IN SET"
E
Estab
5) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
6) Fabrication of Ground Sheet TPO OG[21]()
Specification : Fabrication of Ground Sheet TPO OG
Specification - JSS 8305-35:2014
R
Estab
7) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()
Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI
AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
8) FABRICATION OF BAG WATER PROOF[21]()
Specification : FABRICATION OF BAG WATER PROOF
AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.
E
Estab
9) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
E
Estab
10) FABRICATION OF ECAD PARACHUTE COMPLETE WITH PACK[21]()
Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33) POLYESTER AND COTTON & 100% POLYESTER TAPE COMPLETE WITH PACK.
AS PER SPECIFICATION NO. IND/TC/2694 WITH AMDT. NO. 3 AND AS PER SAMPLE HELD WITH OCFS
E
Estab
Category :
Grade : Grade III
Size :
SS
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012[21]()
Specification : IND/TC/4552 (M) & Approved Sample
E
Estab
Category :
Grade : Grade III
Size :
SS
1Ordnance Parachute Factory
Name
Specification
Use
Status
1) FABRICATION OF PONCHO GLACIER[9911037521]()
Specification : As per Drawing/ Technical particulars enclosed
R
Nonestab
2) Fabrication of SD Para Pack Cover[2110025032]()
Specification : Fabrication of SD Para Pack Cover is as per Specn. No. IND/TC/2694 with amendment 1, 2 & 3
R
Nonestab
3) Fabrication of Carrying Bag HAP[2110025034]()
Specification : As per Drawing/Tech Particulars attached
R
Nonestab
4) Fabrication of Carrying Bag PTAM[2110025037]()
Specification : As per Drawing/Tech Particulars attached
R
Nonestab
5) Fabrication of Pack Cover HAP[2110025035]()
Specification : Drawing No. - ADRDE/1283-A-3(c)
R
Nonestab
6) Fabrication of Pack Cover PTAM[2110025038]()
Specification : Drawing No. –ADRDE/1142(g)
R
Nonestab
7) Fabrication of Bag Parachutist[2110025039]()
Specification : As per Drawing/Tech Particulars attached.
Drawing No.CIT&C/TC-8/39
R
Nonestab
8) Fabrication of BAG INNER PTAM[2110025036]()
Specification : As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1143(e)
R
Nonestab
9) Fabrication of BAG INNER HAP[2110025033]()
Specification : As per Drawing/Tech Particulars attached.
Drawing No.ADRDE/1283-A-4(b)
R
Nonestab
10) FABRICATION OF CARRYING BAG BP SU 30[2110025041]()
Specification : AS PER DRG. NO. ADRDE/1402-09(c)
R
Nonestab
11) FABRICATION OF DEP BAG BRAKE PARA LCA[2110025046]()
Specification : AS PER DRG. NO. 1.3.01-06 (b)
R
Nonestab
12) FABRICATION OF DEP BAG BRAKE PARA MIG 29[2110025043]()
Specification : AS PER DRG. NO. ADRDE/1235-A-2 (b)
R
Nonestab
13) FABRICATION OF CARRYING BAG BP LCA[2110025047]()
Specification : As per Drg. No. 1.3.01-09 (a)
R
Nonestab
14) FABRICATION OF PARA 81 MM[2110025058]()
Specification : Drg. No. ADRDE/1112
R
Nonestab
15) Fabrication of Para Drogue Para 155 mm[2110025070]()
Specification : Latest drawing of Para 155 mm Naschern & drogue Para with gore 155mm received vide' Ordnance Factory Dehu Road A unit of Munitions India Ltd. PUNE letter No 3241/OFDR/MCO/155 mm dtd 18.10.2021
Drogue Parachute:- Assy. Drg. 2440A20014,
R
Nonestab
16) Fabrication of main Para 155 mm[2110025069]()
Specification : Latest drawing of Para 155 mm Naschern & drogue Para with gore 155mm received vide Ordnance Factory Dehu Road A unit of Munitions India Ltd. PUNE letter No 3241/OFDR/MCO/155 mm dtd 18.10.2021 Parachute:- Assy. Drg. 2440 A 13032
Designer
