OFB Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

List of registered vendors

Search

Reset

Sort by

Name, Address & Phone No.

Vendor Code

Factory

Products

Category, Grading, Size

1781

Indo MIM Pvt. Ltd.
Plot No 45(P), KIADB Industrial Area Hoskote Bangalore Karnataka
PIN1 : 562114
Phone No. : 22048800
GSTIN : 29AABCI0484L1ZA

BLRA01418E

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 ALT STAR[70]()	Specification : IC REAR SIGHT BLOCK AS PER DRG NO IC K 1202 ALT STAR	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()	Specification : MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR	R	Nonestab
2) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()	Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR	R	Nonestab
3) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()	Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR	R	Nonestab

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting Cocking bracket for JVPC[70]()	Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting Bracket fore Sight for JVPC[01]()	Specification : Investment Casting Bracket Fore Sight JVPC 5.56mm as per Drg. No. SK-JVPC-6004*	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting Cocking bracket for JVPC[70]()	Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting Cocking bracket for JVPC[70]()	Specification : INVESTMENT CASTING COCKING BRACKET FOR JVPC 5.56X30MM DRG.NO. SK-JVPC-598*	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting of Trigger for Revolver[01]()	Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Investment Casting of Trigger for Revolver[01]()	Specification : Investment Casting of Trigger SK-5378R Required For Revolver MK-III,D.A. No. 24/09, Dt. 16.07.09	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.[70]()	Specification : SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) SLIDE FOR 0.32 PISTOL.[70]()	Specification : STEEL BS:970 PT .1. 1994 GRADE 070 M55 (EN-9) TREATMENT:-BEFORE MACHINING 220 TO 260 HV	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.[70]()	Specification : SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) PICATINY RAIL TOP INVESTMENT CASTING FOR RIFLE 5.56MM EXCALIBUR.[70]()	Specification : MATERIAL IS:10343-1989 GRADE-28 ALT. MAT. BS 1346 : 1974 PART1 CLASS2	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF GUARD TRIGGER[70]()	Specification : INVESTMENT CASTING OF GUARD TRIGGER TO RFI SK.NO.4312*12(LATEST DC.04/003/05 DT.17/02/05).FOR .315" SPORTING RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) COCKING HANDLE GRIP FOR 12 BORE MODIFIED PUMP ACTION GUN RFI DRG NO PAG 0056[70]()	Specification : COCKING HANDLE (GRIP) FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG. NO. PAG-0056. (MATL.-NYLON-66 TO SPECN. DEF-STD.93-8/1, COLOUR- BLACK)	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG NO RFI SK 8972 G FOR 12 BORE PUMP ACTION GUN[70]()	Specification : INVESTMENT CASTING OF MAGAZINE TUBE LOCKING HOLDER TO DRG.NORFI.SK-8972-G. FOR 12 BORE PUMP ACTION GUN	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF BODY FOR 12 BORE PAG.[70]()	Specification : MAT. BS: 3146 PART I 1974 CLASS 5 GRADE 'A'	C	Nonestab
2) INVESTMENT CASTING OF RECEIVER FOR 0.32[70]()	Specification : bs	C	Nonestab
3) INVESTMENT CASTING OF BRACKET(WITH HEAT TREATMENT) FOR RIFLE 5.56MM.INSAS.[70]()	Specification : bs	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) IC BLOCK GAS OF 7.62 MM ASSUALT RIFLE GHAATAK,[70]()	Specification : IC BLOCK GAS OF 7.62 MM ASSUALT RIFLE GHAATAK, RFI SK. NO.9727*AR (LT.DC. NO. 11E/026/17 DT.25/05/2017	C	Nonestab
2) INVESTMENT CASTING OF RECEIVER FOR 0.32[70]()	Specification : bs	C	Nonestab
3) INVESTMENT CASTING FOR SLIDE(RETRACTING)TO RFI SK.NO.5709*13FOR RIFLE 5.56MM INSAS[70]()	Specification : AS PER DRAWING	C	Nonestab
4) INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A[70]()	Specification : AS PER DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) MODIFIED LEVER CHANGE FOR ASSAULT RIFLE GHAATAK[70]()	Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK)	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) I C BLOCK GAS FOR ASSUALT RIFLE GHAATAK[7020312052]()	Specification : I C BLOCK GAS FOR ASSUALT RIFLE GHAATAK	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING OF BODY for 9mm auto pistol[70]()	Specification : INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*6FOR PISTOL AUTO 9MM 1A (LT.DC.NO.02/03/19 DT.02-03-19)	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN[70]()	Specification : INVESTMENT CASTING FOR TRIGGER OF TEAR GAS GUN FROM TRADE SOURCES RFI SK NO. -9093-GG/A	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) AUTO SEAR TO DRG NO MIM K 2067 00 TAR[70]()	Specification : AUTO SEAR TO DRG NO MIM K 2067 00 TAR	R	Nonestab

Category :
Grade : Grade III
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR[70]()	Specification : LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR	R	Nonestab

Category :
Grade : Grade III
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) AUTO SEAR TO DRG NO MIM K 2067 00 TAR[70]()	Specification : AUTO SEAR TO DRG NO MIM K 2067 00 TAR	R	Nonestab
2) SUPPLY OF EXTRACTOR AS PER DRG NO MIM K 2012 00[70]()	Specification : AS PER DRG NO MIM K 2012 00	R	Nonestab
3) LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR[70]()	Specification : LOWER HAND GUARD BAND AS PER DRG NO MIM K 1204 01 TAR	R	Nonestab
4) SUPPLY OF DISCONNECTOR AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO MIM K 2065 00 WITH FIRMS MATERIAL	R	Nonestab
5) COMPENSATOR AS PER DRG NO MIM K 1021 01 TAR[70]()	Specification : COMPENSATOR AS PER DRG. NO. MIM - K -1021- 01 (TAR)	R	Nonestab
6) REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR[70]()	Specification : REAR SIGHT LEAF AS PER DRG NO MIM K 2021 01 TAR	R	Nonestab
7) CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR[70]()	Specification : CROSS BOLT HOOK LATCH AS PER DRG NO MIM K 4004 02 TAR	R	Nonestab
8) LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR[70]()	Specification : LOCK LOWER HAND GUARD BAND TO DRG NO MIM K 1212 01 TAR	R	Nonestab
9) RETAINER TO DRG NO MIM K 2091 01 TAR[70]()	Specification : RETAINER TO DRG NO MIM K 2091 01 TAR	R	Nonestab

Category :
Grade : Grade III
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL[70]()	Specification : SUPPLY OF GAS PORT BLOCK AS PER DRG NO K 1205 STAR 3 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Ordnance Factory Tiruchirapalli

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

[Deemed Registration]

Name	Specification	Use	Status
1) CATCH BARREL FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.
2) CATCH HAMMER FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.
3) LEVER EXTRACTOR FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.
4) LEVER SPRING MAIN FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.
5) MANUFACTURING & SUPPLY OF SMAL ARMS COMPONENTS THROUGH MIM ROUTE[AS PER DRAWING]()	AS PER DRAWING	C	Established
6) MANUFACTURING&SUPPLY OF SMALL ARMS COMPONENTS THROUGH MIM ROUTE[AS PER DRAWING]()	AS PER DRAWING	C	Established
7) PAWL FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.
8) STOP CYLINDER FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.
9) STOP SAFETY FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.
10) TRIGGER FOR REVOLVER .32"[AS PER DRAWING]()	AS PER DRAWING	C	Estab.

Category : P
Grade : II
Size : S

1) Ordnance Factory Tiruchirapalli

Category :
Grade : Grade III
Size : L

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) HOUSING SIGHT REAR THROUGH MIM ROUTE FOR JVPC Description : HOUSING SIGHT REAR THROUGH MIM ROUTE FOR JVPC()	Specification : HOUSING SIGHT REAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204-03-04-11-19-005-00DA	C	Estab

Category : ddp
Grade : 3
Size : S

1) Gun and Shell Factory

[ENR Registration]

Name	Specification	Use	Status
1) BALL IN FINISHED CONDITION TO ARDE DRG NO 2052 6 GSF SK NO M 8034 Description : BALL IN FINISHED CONDITION TO ARDE DRG NO 2052 6 GSF SK NO M 8034()	Specification : BALL IN FINISHED CONDITION TO ARDE DRG. NO. 2052/6 (GSF SK No. M-8034)	C	Estab

Category : ddp
Grade : 3
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) SEAR FOR JVPC 5 56 MM[70]()	Specification : Sear Through MIM Route for JVPC 5.56x30 mm DRG No.0204-03-04-02-14-010-00DA.	C	Nonestab
2) Wheel Rear Sight for JVPC through MIM Route[70]()	Specification : Wheel Rear Sight DRG No.0204-03-04-00-01-003-00DA for JVPC 5.56mm (MIM Route)	C	Nonestab
3) Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route[70]()	Specification : Stud change lever DRG No 0204 03 04 02 15 001 00DA for JVPC 5 56mm through MIM route	C	Nonestab
4) Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route[70]()	Specification : Slider Breech Block DRG No 0204 03 04 00 00 001 00DA for JVPC 5 56 mm MIM Route	C	Nonestab
5) STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE[70]()	Specification : Stud Cocking Handle DRG No.0204-03-04-00-01-013-00DA for JVPC 5.56 mm Through (MIM Route)	C	Nonestab
6) Wheel Lock through MIM route for JVPC[70]()	Specification : Wheel lock DRG No.0204-03-04-02-14-021-00DA for JVPC 5.56mm (MIM Route)	C	Nonestab
7) HAMMER MIM ROUTE FOR JVPC[7012471813]()	Specification : HAMMER (MIM ROUTE) FOR JVPC 5.56X30 MM TO DRG.NO.0204-03-04-02-14-007-00DA	C	Nonestab
8) Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route[70]()	Specification : Sear Safety for JVPC 5 56x30MM 0204 03 04 02 14 005 00DA MIM Route	C	Nonestab
9) Trigger Rear for JVPC 5 56 30MM To Drg No 0204 03 04 02 14 009 00DA MIM Route[70]()	Specification : Trigger Rear for JVPC 5.56x30MM To Drg. No. 0204-03-04-02-14-009-00DA (MIM Route)	C	Nonestab
10) Catch Magazine for JVPC 5 56 30MM 0204 03 04 02 14 014 00DA MIM Route[70]()	Specification : Catch Magazine for JVPC 5.56x30MM 0204-03-04-02-14-014-00DA (MIM Route)	C	Nonestab
11) Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route[70]()	Specification : Plunger Wheel Lock for JVPC 5 56X30 MM DRG No 0204 03 04 02 14 019 00DA MIM Route	C	Nonestab
12) Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA[70]()	Specification : Stopper Rear Spring Recoil for JVPC 556 MM Through MIM Route DRG No 0204 03 04 00 06 005 00DA	C	Nonestab
13) Screw Axis Rear Sight DRG No0204 03 04 00 01 004 00DA for JVPC 5 56mm through MIM Route[70]()	Specification : Screw Axis Rear Sight DRG No0204 03 04 00 01 004 00DA for JVPC 5 56mm through MIM Route	C	Nonestab
14) Stud Cocking Handle DRG No 0204 03 04 00 01 013 00DA for JVPC 5 56mm through MIM Route[70]()	Specification : Stud Cocking Handle DRG No 0204 03 04 00 01 013 00DA for JVPC 5 56mm through MIM Route	C	Nonestab
15) Extractor JVPC 5 56MM thorugh MIM route DRG No 0204 03 04 00 05 002 00DA[70]()	Specification : Extractor JVPC 5 56MM thorugh MIM route DRG No 0204 03 04 00 05 002 00DA	C	Nonestab
16) Nut plain round lock fore sight DRG No 0204 03 04 00 01 009 00DA for JVPC 5 56mm through MIM route[70]()	Specification : Nut plain round lock fore sight DRG No 0204 03 04 00 01 009 00DA for JVPC 5 56mm through MIM route	C	Nonestab
17) Sleeve Finish as per drawing no SK 6502 TE Through MIM Route[70]()	Specification : Sleeve Finish as per drawing no SK 6502 TE Through MIM Route	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) Cap Spring Return to Drg. No. CTM-0125/1 TO 6 IN F/C[70]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) EXTRACTOR TO DRG. NO. CTM-0121/1 TO CTM-0121/6 IN FC[70]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) CATCH MAGAZINE TO DRG. NO. CTM-0116M IN F/C[70]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) LEVER SEAR TO DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL[70]()	Specification : DRG. NO.M-8202F(PB-16) FOR 0.32" PISTOL	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 " PISTOL[70]()	Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) TRIGGER WITHOUT NICKEL PLATING TO DRG. NO: CTM-0033 A (PB-10) DT:-20.1202 IN FINISHED CONDITION[70]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SAFETY LEVER WITHOUT NICKEL PLATING TO DRG.NO: M-8199 J (PB-6) DT:- 29.08.11 IN FINISHED CONDITION.[70]()	Specification : AS PER DRG & SPECIFICATION	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF REAR SIGHT LEAF[70]()	Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. NO. K 2025	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 1111	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()	Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG NO K 2012[70]()	Specification : AS PER DRG. NO. K 2012	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SEAR TO DRG NO.29P 0060*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) IC CROSS BOLT HOOK LATCH AS PER DRG NO K IC 4004[70]()	Specification : AS PER DRG NO: K-IC-4004	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) IC RETAINER AS PER DRG NO K IC 2091[70]()	Specification : AS PER DRG NO: K-IC-2091. (LF.No.7024020910)	C	Nonestab

Category : p
Grade : Grade I
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO K IC 4007[70]()	Specification : IC LEVER LOCKING FOLDABLE BUTT AS PER DRG NO: K-IC-4007	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) CATCH SAFETY TO DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG.NO.29P 0046*2 required for 0.315" Sporting Rifle	C	Nonestab
2) SEAR TO DRG NO.29P 0060*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG NO.29P 0060*2 required for 0.315" Sporting Rifle	C	Nonestab
3) BOLT LOCKING TO DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle	C	Nonestab
4) COCKING PIECE TO DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle[70]()	Specification : AS PER DRG.NO.29P 0016*2 required for 0.315" Sporting Rifle	C	Nonestab

Category : p
Grade : Grade II
Size : L

1) Field Gun Factory Kanpur

Name	Specification	Use	Status
1) HAMMER AS PER DRG NO SK 02050[70]()	Specification : HAMMER AS PER DRG NO SK 02050	C	Estab
2) TRIGGER AS PER DRG NO SK 02045[70]()	Specification : TRIGGER AS PER DRG NO SK 02045	E	Estab
3) STOP SAFETY AS PER DRG NO SK 02051[70]()	Specification : STOP SAFETY AS PER DRG NO SK 02051	E	Estab
4) SAFETY AS PER DRG NO SK 02053[70]()	Specification : SAFETY AS PER DRG NO SK 02053	E	Estab
5) CATCH HAMMER AS PER DRG NO SK 02056[70]()	Specification : CATCH HAMMER AS PER DRG NO SK 02056	R	Estab
6) PAWL AS PER DRG NO SK 02046[70]()	Specification : PAWL AS PER DRG NO SK 02046	E	Estab
7) CATCH BARREL AS PER DRG NO SK 02057[70]()	Specification : CATCH BARREL AS PER DRG NO SK 02057	E	Estab
8) LEVER EXTRACTOR AS PER DRG NO SK 02054[70]()	Specification : LEVER EXTRACTOR AS PER DRG NO SK 02054	E	Estab
9) EXTRACTOR AS PER DRG NO SK 02047[70]()	Specification : EXTRACTOR AS PER DRG NO SK 02047	E	Estab
10) SHIELD AS PER DRG NO SK 02048[70]()	Specification : SHIELD AS PER DRG NO SK 02048	E	Estab
11) CATCH TRIGGER AS PER DRG NO SK 02055[70]()	Specification : CATCH TRIGGER AS PER DRG NO SK 02055	E	Estab
12) CAM CYLINDER AS PER DRG NO SK 02049[70]()	Specification : CAM CYLINDER AS PER DRG NO SK 02049	E	Estab
13) SWIVEL HAMMER AS PER DRG NO SK 02052[70]()	Specification : SWIVEL HAMMER AS PER DRG NO SK 02052	E	Estab

Category :
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) EXTRACTOR MIM FOR 7.62MM ASSAULT RIFLE GHAATAK[70]()	Specification : EXTRACTOR (MIM) OF 7.62MM ASSAULT RIFLE GHAATAK AS PER RFI SK NO. 10226	C	Nonestab

Category : p
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) SEAR SAFETY THROUGH MIM ROUTE FOREXCALIBUR INSAS 1C AND GHATAK[70]()	Specification : SEAR SAFETY TO RFI.SK.10367 (THROUGH MIM ROUTE) FOREXCALIBUR MK-1,5.56X45MM ASSAULT RIFLE INSAS 1C AND GHATAK	C	Nonestab

Category : p
Grade : Grade III
Size : L

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) PLUNGER MULTI APPLICATION HOD. (MIM ROUTE) FOR RIFLE 5.56MM INSAS [70]()	Specification : FINISH COMPT. OF PLUNGER MULTI APPLICATION (HOD) DS CAT NO.1005-007788 (LATEST DC-24636-SA DT.17-2-2000) FOR RIFLE 5.56MM INSAS	C	Nonestab
2) TRIGGER (FINISH) (THROUGH MIM ROUTE) FOR PISTOL AUTO 9MM 1A.[70]()	Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.	C	Nonestab
3) EXTRACTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS[70]()	Specification : EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN	C	Nonestab
4) LINK HAMMER FOR PISTOL AUTO 9MM 1A.[70]()	Specification : LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3	C	Nonestab
5) HAMMER MK-2 (THROUGH MIM ROUTE) FOR PISTOL 9MM AUTO 1A.[70]()	Specification : HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1	C	Nonestab
6) CATCH MAGAZINE (THROUGH MIM ROUTE) FINISH FOR 9MM AUTO PISTOL 1A.[70]()	Specification : DA CAT NO 1005-003148 IS:3748-1990 DESIGNATION 75. T-6	C	Nonestab
7) SEAR FOR 9MM AUTO PISTOL 1A.[70]()	Specification : DS CAT NO. 1005-003172 IS:3748 : 1990 DESIGNATION 75 T-6	C	Nonestab
8) LEVER TRIPPING (THROUGH MIM ROUTE) FOR 9MM AUTO PISTOL[70]()	Specification : LEVER TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122 FOR 9MM AUTO PISTOL	C	Nonestab
9) GAS REGULATOR (THROUGH MIM ROUTE) FOR RIFLE 5.56MM.INSAS[70]()	Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).	C	Nonestab
10) WHEEL LOCK FOR RIFLE 5.56MM INSAS [79]()	Specification : WHEEL LOCK TO DSCAT NO.1005-560045 (DC-26554-SA)FOR RIFLE 5.56MM INSAS.	C	Nonestab
11) TRIGGER FINISH (THROUGH MIM ROUTE) (FROM TRADE FINISH).FOR 0.32 PISTOL [70]()	Specification : TRIGGER FINISH TO DRG NO.PS32-112(FROM TRADE FINISH).FOR 0.32" PISTOL	C	Nonestab
12) F/COMPT EJECTOR SMALL ARMS CARTRIDGE (THROUGH MIM ROUTE) FOR RIFLE 5.56MM INSAS [79]()	Specification : F/COMPT EJECTOR SMALL ARMS CARTRIDGE DRG.NO.2689/1,SHT-5 TODS CAT NO.1005-007905(DC-26518-SA)THROUGH MIM ROUTE FOR RIFLE 5.56MM INSAS.MACRO ETCH TEST TO CONFORM ASTM381-84STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE 2.NMIR TEST AS PER IS4163-82WI	C	Nonestab
13) F/COMPT RETAINER (THROUGH MIM ROUTE) FOR RIFLE 5.56MM INSAS [79]()	Specification : F/COMPT RETAINER TO D.S.CAT NO.1005-007824(DC-24129-SA)MIM ROUTE FOR RIFLE 5.56MM INSAS	C	Nonestab
14) F/COMPT LEVER CHANGE (THROUGH MIM ROUTE) FOR RIFLE 5.56MM INSAS [79]()	Specification : F/COMPT LEVER CHANGE TO D.S.CAT NO.1005-007811(DC-26553-SA)THROUGH MIM ROUTE FOR RIFLE 5.56MM INSAS	C	Nonestab

Category : p
Grade : Grade III
Size : L

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) EOI NO 125MMEPQ18000065 MANUFACTURING AND SUPPLY OF INVESTMENT CASTINGS REQUIRED FOR ARMOURED VEHICLES[02]()	Specification : INVESTMENT STEEL CASTING	R	Nonestab

Category : p
Grade : Grade II
Size : L

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) EXTRACTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE / Alt Material DS.CAT.NO. 26923-SA DATED-29.08.2016. Description : EXTRACTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE / Alt Material DS.CAT.NO. 26923-SA DATED-29.08.2016.()	Specification : DS.CAT.NO. 26923-SA DATED-29.08.2016.	C	Estab
2) EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT NO 1005 007905 FOR INSAS 5 56MM Description : EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT NO 1005 007905 FOR INSAS 5 56MM()	Specification : EJECTOR SMALLARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16	C	Estab
3) Wheel Rear Sight for JVPC through MIM Route Description : Wheel Rear Sight for JVPC through MIM Route()	Specification : Wheel Rear Sight DRG No. 0204 03 02 00 01 002 00DD for JVPC 5.56MM (MIM Route)	C	Estab
4) Screw Axis Rear Sight through MIM route for JVPC Description : Screw Axis Rear Sight through MIM route for JVPC()	Specification : Screw Axis Rear Sight through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODC Item Code 7012470172	C	Estab
5) FORE SIGHT FOR JVPC Description : FORE SIGHT FOR JVPC()	Specification : FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA	C	Estab
6) Rear sight for JVPC through MIM Route Description : Rear sight for JVPC through MIM Route()	Specification : Rear sight Drg no. 0204 03 02 00 01 005 00DD for JVPC 5.56MM (MIM Route)	C	Estab
7) STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE Description : STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE()	Specification : Stud Cocking Handle DRG No. 0204 03 02 00 -01-004-00DC for JVPC 5.56 MM (MIM Route)	C	Estab
8) Slide Cocking Handle through MIM route for JVPC Description : Slide Cocking Handle through MIM route for JVPC()	Specification : Slide Cocking Handle DRG No. 0204 03 02 00 01 003 00DE for JVPC 5.56 (MIM Route)	C	Estab
9) Nut Plain Round Lock Fore Sight through MIM Route for JVPC Description : Nut Plain Round Lock Fore Sight through MIM Route for JVPC()	Specification : Nut Plain Round Lock Fore Sight DRG No. 0204 03 02 00 01 011 00DA for JVPC 5.56 MM (MIM Route)	C	Estab
10) HOLDING OPENING DEVICE HOD FOR JVPC MIM ROUTE Description : HOLDING OPENING DEVICE HOD FOR JVPC MIM ROUTE()	Specification : DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM	C	Estab
11) Housing Lever Catch Magazine for JVPC through MIM ROUTE Description : Housing Lever Catch Magazine for JVPC through MIM ROUTE()	Specification : Housing Lever Catch Magazine DRG No. 0204 03 02 18 29 002 for JVPC 5.56 for JVPC 5.56 (MIM Route)	C	Estab
12) Housing Plunger through MIM Route for JVPC Description : Housing Plunger through MIM Route for JVPC()	Specification : Housing Plunger DRG NO. 0204 03 02 18 29 004 00DF for JVPC 5.56 MM (MIM Route)	C	Estab
13) Trigger Front through MIM route for JVPC Description : Trigger Front through MIM route for JVPC()	Specification : Trigger Front through MIM route for JVPC as per Drg No 0204 03 02 02 18 001 OODC Item Code 7012470183	C	Estab
14) Plunger Wheel Lock for JVPC MIM Route Description : Plunger Wheel Lock for JVPC MIM Route()	Specification : Plunger Wheel Lock DRG No. 0204 03 02 02 18 006 00DF for JVPC 5.56MM (MIM Route)	C	Estab
15) Wheel Lock through MIM route for JVPC Description : Wheel Lock through MIM route for JVPC()	Specification : Wheel Lock through MIM route for JVPC as per Drg No 0204 03 02 02 18 007 OODC Item Code 7012470185	C	Estab
16) Sear Safety through MIM route for JVPC Description : Sear Safety through MIM route for JVPC()	Specification : Sear Safety Drg No. 0204 03 02 02 18 008 00DD FOR JVPC5.56MM (MIM Route)	C	Estab
17) LEVER CATCH MAGAZINE FOR JVPC through MIM ROUTE Description : LEVER CATCH MAGAZINE FOR JVPC through MIM ROUTE()	Specification : DRG NO. 0204 03 02 02 18 018 00DE FOR JVPC 5.56MM	C	Estab
18) Stud Change Lever for JVPC Description : Stud Change Lever for JVPC()	Specification : Stud Change Lever Drg. No. 0204 03 02 02 20 001 OODC for JVPC 5.56 MM (MIM ROUTE)	C	Estab
19) LEVER STUD CHANGE RIGHT for JVPC MM through MIM route Description : LEVER STUD CHANGE RIGHT for JVPC MM through MIM route()	Specification : DRG No. 0204 03 02 00 02 001 00DE	C	Estab
20) Lever Stud Change Left for JVPC through MIM ROUTE Description : Lever Stud Change Left for JVPC through MIM ROUTE()	Specification : Lever Stud Change Left DRG No. 0204 03 02 02 20 002 00DD for JVPC 5.56 (MIM Route)	C	Estab
21) GUIDE PLUNGER BUTT LOCK through MIM Route for JVPC Description : GUIDE PLUNGER BUTT LOCK through MIM Route for JVPC()	Specification : Guide Plunger Butt Lock DRG No. 0204 03 02 03 22 002 00DD for JVPC 5.56 MM (MIM Route)	C	Estab
22) Plunger Butt Lock for JVPC Description : Plunger Butt Lock for JVPC()	Specification : DRG No. 0204 03 02 04 14 001 for JVPC 5.56MM (MIM Route)	C	Estab
23) SLIDER BREECH BLOCK for JVPC Description : SLIDER BREECH BLOCK for JVPC()	Specification : DRG NO. 0204 03 03 00 00 001 00DD FOR JVPC 5.56MM	C	Estab
24) EXTRACTOR JVPC 5.56MM THROUGH MIM / Alt Material ROUTE DRG.NO.0204 03 02 00 00 004 00DA Description : EXTRACTOR JVPC 5.56MM THROUGH MIM / Alt Material ROUTE DRG.NO.0204 03 02 00 00 004 00DA()	Specification : DRG.NO.0204 03 02 00 00 004 00DA	C	Estab
25) Sight Leaf for JVPC through MIM Route Description : Sight Leaf for JVPC through MIM Route()	Specification : Sight Leaf for JVPC 5.56 MM through MIM Route DRG No. 0204 03 02 00 01 008 00DB	C	Estab
26) Piece Guide for JVPC through MIM Route Description : Piece Guide for JVPC through MIM Route()	Specification : Piece Guide for JVPC 5.56MM through MIM Route DRG. No. 0204 03 02 38 40 002 00DD	C	Estab
27) PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO. 0204 03 03 02 36 003 00DA Description : PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO. 0204 03 03 02 36 003 00DA()	Specification : DRG.NO. 0204 03 03 02 36 003 00DA	R	Estab
28) Stopper Front Spring Recoil for JVPC through MIM route Description : Stopper Front Spring Recoil for JVPC through MIM route()	Specification : Stopper Front Spring Recoil for JVPC 5.56MM through MIM route. DRG No.0204-03-02-00-06-005-00DB	C	Estab
29) Catch Barrel for Revolver . 32' Through MIM process Description : Catch Barrel for Revolver . 32' Through MIM process()	Specification : DRG NO.PH-1-5 D.A. NO. 61/08 DT 22.09.08 (W/O HEAT TREATMENT)	C	Estab
30) TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER THROUGH MIM ROUTE Description : TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER THROUGH MIM ROUTE()	Specification : TRIGGER IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-7-1 ALT D.A. NO. 05/18 DT 07.03.2018. THROUGH MIM ROUTE.	C	Estab
31) STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06 Description : STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06()	Specification : DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD()	Specification : AS PER DRG.	C	Estab
2) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION()	Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD()	Specification : AS PER DRG.	C	Estab
2) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION()	Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) LEVER EXTRACTOR TO DRG.NO. PH-1-7FD Description : LEVER EXTRACTOR TO DRG.NO. PH-1-7FD()	Specification : AS PER DRG.	C	Estab
2) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION Description : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION()	Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Sear Safety through MIM route for JVPC[70]()	Specification : Sear Safety through MIM route for JVPC as per Drg No 0204 03 02 02 18 008 OODD Item Code 7012470186	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Stopper Front Spring Recoil through MIM route for JVPC[70]()	Specification : Stopper Front Spring Recoil through MIM route for JVPC as per Drg No 0204 03 02 00 06 005 OODB Item Code 7012470214	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Slide Cocking Handle through MIM route for JVPC[70]()	Specification : Slide Cocking Handle through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODE Item Code 7012470177	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Lever Stud Change Left for JVPC through MIM ROUTE[70]()	Specification : Lever Stud Change Left Drg. No. 0204 03 02 02 20 002 OODD for JVPC (MIM ROUTE)	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Trigger Front through MIM route for JVPC[70]()	Specification : Trigger Front through MIM route for JVPC as per Drg No 0204 03 02 02 18 001 OODC Item Code 7012470183	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION[70]()	Specification : CATCH HAMMER TO DRG NO.PHMK-II-6-4 IN FINISHED CONDITION	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Trigger Front through MIM route for JVPC[70]()	Specification : Trigger Front through MIM route for JVPC as per Drg No 0204 03 02 02 18 001 OODC Item Code 7012470183	C	Nonestab
2) Auto Sear for JVPC through MIM Route[70]()	Specification : AUTO SEAR FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 02 18 016 00DC	C	Nonestab
3) EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.[70]()	Specification : EXTRACTOR (SMALL ARMS CARTRIDGE) DS CAT NO.1005-006633 DC NO.25387-SA DT.07.06.02 IN FINISHED CONDN.	C	Nonestab
4) EJECTOR SMALL ARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT NO 1005 007905 FOR INSAS 5 56MM[70]()	Specification : EJECTOR SMALLARMS CARTRIDGE THROUGH MIM ROUTE TO DS CAT. NO. 1005-007905 FOR INSAS 5.56MM DC(I)NO. 26933-SA, DT. 07.09.16	C	Nonestab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Lever Extractor for Revolver . 32' Through MIM process[70]()	Specification : PH-1-7	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Auto Sear for JVPC through MIM route[70]()	Specification : Auto Sear for JVPC through MIM route as per Drg No 0204 03 02 02 18 016 OODC Item Code 7012470203	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Screw Axis Rear Sight through MIM route for JVPC[70]()	Specification : Screw Axis Rear Sight through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODC Item Code 7012470172	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Piece Guide through MIM route for JVPC[70]()	Specification : Piece Guide through MIM route for JVPC as per Drg No 0204 03 02 38 40 002 OODD Item Code 7012470212	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) LEVER CATCH MAGAZINE FOR JVPC through MIM ROUTE[70]()	Specification : DRG NO. 0204 03 02 02 18 018 00DE FOR JVPC 5.56MM	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) Wheel Lock through MIM route for JVPC[70]()	Specification : Wheel Lock through MIM route for JVPC as per Drg No 0204 03 02 02 18 007 OODC Item Code 7012470185	C	Estab

Category : p
Grade : Grade III
Size : L

1) Small Arms Factory

Name	Specification	Use	Status
1) WHEEL REAR SIGHT for JVPC through MIM route[70]()	Specification : DRG NO. 0204 03 02 00 01 002 00DC FOR JVPC 5.56MM	C	Nonestab
2) REAR SIGHT DRG NO. 0204 03 02 00 01 005 00DD FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 00 01 005 00DD FOR JVPC 5.56MM (MIM ROUTE)	C	Nonestab
3) NUT PLAIN ROUND LOCK FORE SIGHT DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG.NO.0204 03 02 00 01 011 00DA FOR JVPC 5.56MM	C	Nonestab
4) HOLDING OPENING DEVICE(HOD) DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG.NO. 0204 03 02 00 01 006 00DD FOR JVPC 5.56MM	C	Nonestab
5) HOUSING LEVER CATCH MAGAZINE DRG NO. 0204 03 02 18 29 002 00DE FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 18 29 002 00DE FOR JVPC 5.56MM	C	Nonestab
6) HOUSING PLUNGER DRG.NO. 0204 03 02 18 29 004 00DD FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG.NO. 0204 03 02 18 29 004 00DD FOR JVPC 5.56MM	C	Nonestab
7) TRIGGER FRONT DRG NO. 0204 03 02 18 001 00DC FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 18 001 00DC FOR JVPC 5.56MM (MIM ROUTE)	C	Nonestab
8) PLUNGER WHEEL LOCK DRG NO. 0204 03 02 02 18 006 00DF FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 02 18 006 00DF FOR JVPC 5.56MM	C	Nonestab
9) LEVER CATCH MAGAZINE FOR JVPC through MIM ROUTE[70]()	Specification : DRG NO. 0204 03 02 02 18 018 00DE FOR JVPC 5.56MM	C	Nonestab
10) STUD CHANGE LEVER DRG NO. 0204 03 02 02 20 001 00DC FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 02 20 001 00DC FOR JVPC 5.56MM	C	Nonestab
11) LEVER STUD CHANGE RIGHT DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 00 02 001 00DE FOR JVPC 5.56MM	C	Nonestab
12) LEVER STUD CHANGE LEFT DRG NO. 0204 03 02 02 20 002 00DD FOR JVPC (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 02 20 002 00DD FOR JVPC	C	Nonestab
13) GUIDE PLUNGER BUTT LOCK DRG NO. 0204 03 02 03 22 002 00DD FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 03 22 002 00DD FOR JVPC 5.56MM	C	Nonestab
14) PLUNGER BUTT LOCK DRG NO. 0204 03 02 04 14 001 00DF FOR JVPC 5.56MM (MIM ROUTE)[70]()	Specification : DRG NO. 0204 03 02 04 14 001 00DF FOR JVPC 5.56MM	C	Nonestab
15) SLIDER BREECH BLOCK for JVPC[70]()	Specification : DRG NO. 0204 03 03 00 00 001 00DD FOR JVPC 5.56MM	C	Nonestab
16) SIGHT LEAF FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO.0204 03 02 00 01 008 00DB[70]()	Specification : DRG.NO.0204 03 02 00 01 008 00DB	C	Nonestab
17) PIECE GUIDE FOR JVPC 5.56MM THROUGH MIM ROUTE DRG.NO.0204 03 02 38 40 002 00DD[70]()	Specification : DRG.NO.0204 03 02 38 40 002 00DD	C	Nonestab
18) PLUNGER CHANGE LEVER RIGHT FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material DRG.NO. 0204 03 03 02 36 003 00DA[70]()	Specification : DRG.NO. 0204 03 03 02 36 003 00DA	C	Nonestab
19) STOPPER FRONT SPRING RECOIL FOR JVPC 5.56MM THROUGH MIM ROUTE / Alt Material[70]()	Specification : AS PER SPECN.	C	Nonestab
20) FORE SIGHT FOR JVPC[70]()	Specification : FORE SIGHT AS PER DRG.NO.0204 03 02 00 01 010 00DA	C	Nonestab
21) STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE[70]()	Specification : STUD COCKING HANDLE FOR JVPC THROUGH MIM ROUTE/ Alt. Material	C	Nonestab
22) Trigger Rear[70]()	Specification : Trigger Rear for JVPC through MIM Route Drg No 0204 03 02 02 18 013 OODC (Item Code- 7012470201)	C	Nonestab
23) Extractor for JVPC[70]()	Specification : Extractor for JVPC through MIM Route Drg No 0204 03 02 00 00 004 OODA (Item Code- 7012470199)	C	Nonestab
24) Screw Axis Rear Sight through MIM route for JVPC[70]()	Specification : Screw Axis Rear Sight through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODC Item Code 7012470172	C	Nonestab
25) Wheel Lock through MIM route for JVPC[70]()	Specification : Wheel Lock through MIM route for JVPC as per Drg No 0204 03 02 02 18 007 OODC Item Code 7012470185	C	Nonestab
26) Auto Sear for JVPC through MIM route[70]()	Specification : Auto Sear for JVPC through MIM route as per Drg No 0204 03 02 02 18 016 OODC Item Code 7012470203	C	Nonestab
27) Slide Cocking Handle through MIM route for JVPC[70]()	Specification : Slide Cocking Handle through MIM route for JVPC as per Drg No 0204 03 02 00 01 003 OODE Item Code 7012470177	C	Nonestab
28) Sear Safety through MIM route for JVPC[70]()	Specification : Sear Safety through MIM route for JVPC as per Drg No 0204 03 02 02 18 008 OODD Item Code 7012470186	C	Nonestab
29) Sear for JVPC[70]()	Specification : sear for JVPC	C	Nonestab

Category : p
Grade : Grade III
Size : L

1782

Neometrix Engineering Private Limited
E148 Sector63 NOIDA UP 201301 E148 Sector63 NOIDA UP 201301 Gautam Budh Nagar Uttar Pradesh
PIN1 : 201301
Phone No. : 4500800
GSTIN : 09AACCN2254N1Z6

DELN08052C

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9073200041 CHARGING VALVE ASSY TO DRG NO 2A46M C607 10C6[90]()	Specification : CHARGING VALVE ASSY TO DRG.NO.2A46M.C607-10C6.	C	Nonestab

Category :
Grade : Grade III
Size : S

1783

Switchgear Manufacturing Company Pvt. Ltd.
Plot No:9, ULD II, Gandrajupalli Gangavaram Madal, Chitoor Dist. Andhra Pradeesh Industrial Park Gandrajupalli Andhra Pradesh
PIN1 : 517432
Phone No. : 9100033679
GSTIN : 37AASCS6238D2ZY

AASCS6238D

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081002381 SHOCK CARTIDGE TO ART NO 5187179[90]()	Specification : AS PER GIVEN SPECIFICATION/DRG	C	Nonestab
2) 9073200041 CHARGING VALVE ASSY TO DRG NO 2A46M C607 10C6[90]()	Specification : CHARGING VALVE ASSY TO DRG.NO.2A46M.C607-10C6.	C	Nonestab

Category :
Grade : Grade III
Size : S

1784

Dynamics Corproation
3 hashim bldg , 1st floor , fort 40 veer nariman road mumbai Maharashtra
PIN1 : 400001
Phone No. : 22871429
GSTIN : 27AAAFD2724L1ZJ

278501980V

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]()	Specification : BUFFER ASSY.TO DRG.1133736/5163822	C	Nonestab
2) 9081005152 RUBBER BUFFER TO PART NO 5177384[90]()	Specification : RUBBER BUFFER TO PART NO 5177384	C	Nonestab

Category :
Grade : Grade III
Size : S

1785

BALAJI PAPER INDUSTRIES
D-4/F PANKI INDUSTRIAL ESTATE, SITE 1KANPUR PANKI KANPUR Uttar Pradesh
PIN1 : 208002
Phone No. : 000000
GSTIN : 09ATPPG9573J2ZT

ATPPG9573J

Download

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) CLOTH ASBESTOS 1.6MM THICK X 104CMS WIDE[21]()	Specification : IND/TC/2248(b)	R	Estab
2) PAPER WRAPPING CRAFT,GRADE-3, 80 GSM +-5% , 841 MM X 100 MTR[21]()	Specification : IS:1397-1990, REAF. 2002	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) PAPER WRAPPING WATER PROOF PLAIN 841MM X 100 MTR(IN ROLL OF 100 MTR EACH)[21]()	Specification : IS 1398-1982M SUPPLIMENTARY SCH NO. CIGS/SS/153(B)	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) BOX CORRUGATED VARIOUS[21]()	Specification : AS PER REQUIREMENT & SPECIFICATION	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) Polythene Bag of different thickness & dimension[21]()	Specification : AS PER REQUIREMENT & SPECIFICATION	R	Estab
2) Polythene Film of different thickness & dimension[21]()	Specification : AS PER REQUIREMENT & SPECIFICATION	R	Estab

Category :
Grade : Grade III
Size : S

1786

PULKIT AGRO PLASR
PLOT NO 18, SECTOR 3, PITHAMPUR, DHAR, (M.P.)-454774 SECTOR 3 PITHAMPUR, DHAR Madhya Pradesh
PIN1 : 454774
Phone No. : 9669005000
GSTIN : 23AAQFP8172N1ZH

AAQFP8172N

Download

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) Polythene Film of different thickness & dimension[21]()	Specification : AS PER REQUIREMENT & SPECIFICATION	R	Estab
2) POLYTHENE BAG OF DIFFERENT THICKNESS & DIMENSIONS [21]()	Specification : AS PER REQUIREMENT & SPECIFICATION	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Self Adhesive Polythene Bag Size 50x35 cms point zero 5 mm Thick[21]()	Specification : Self Adhesive Polythene Bag Size 50x35 cms 0.05 mm Thick CQA(GS)/US/434(a) except sealing will be 'self Adhesive'	R	Estab
2) HDPE Bag White Size 75CM X 50CM X 100CM[21]()	Specification : IS:11652-2000 HDPE Bag White Size 75 CM X 50 CM X 100 CM	R	Estab
3) Self Adhesive Polythene bag of size 45x35cm and point 04 MM Thick[21]()	Specification : SELF ADHESIVE POLYTHENE BAG OF SIZE - 45 X 35 CM & 0.04 MM THICK SPECIFICATION - CQA(GS)/US/434(a) Except sealing shall be of Adhesive type	R	Estab
4) Self adhesive Polythene bag Size 65x50cm X point zero 5 mm thick[21]()	Specification : Self adhesive Polythene bag Size 65x50cm X 0.05 mm thick No. CQA(GS)/US/434(a) except sealing will 'self adhesive'	R	Estab
5) Self Adhesive Polythene Bag Size 95x70 cm x point zero 5 mm[21]()	Specification : Self Adhesive Polythene Bag Size 95 x 70 cm x 0.05 mm Specification no. CQA(GS)/US/434(a) Except sealing will be 'self adhesive"	R	Estab
6) Self Adhesive Polythene Bag Size 80x50 cm x point zero 5 mm[21]()	Specification : Self Adhesive Polythene Bag Size 80 cm x 50 cm. Thickness of Poly Film-0.05 mm Specification no. CQA(GS)/US/434(a). Except that the sealing will be "Self Adhesive"	R	Estab
7) SELF ADHESIVE POLYTHENE BAG OF SIZE 41X31 point five CM and point zero 5 MM[21]()	Specification : SSELF ADHESIVE POLYTHENE BAG OF SIZE 41X31.5 CM & 0.05 MM CQA(GS)/US/434(a) EXCEPT SEALING WILL BE 'SELF ADHESIVE'	R	Estab
8) SELF ADHESIVE POLYTHENE BAG SIZE 40CM WIDTH X 76 CM LENGTH X 0 POINT 05 MM THICK[21]()	Specification : SELF ADHESIVE POLYTHENE BAG SIZE 40CM WIDTH X 76 CM LENGTH X 0.05 MM THICK CQA (GS)/US/434(A). EXCEPT SEALING WILL BE 'SELF ADHESIVE'.	R	Estab
9) SELF ADHESIVE POLYTHENE BAG SIZE 50 CM X 35 CM THICKNESS OF POLYTHENE FILM 0 point 04 MM[21]()	Specification : SELF ADHESIVE POLYTHENE BAG.SIZE:50CM X 35 CM.THICKNESS OF POLYTHENE FILM-0.04 MM SPECIFICATION;-CQA(GS)/US/434 (a),EXCEPT THAT THE SEALING WILL BE "SELF ADHESIVE"AS PER RELEVANT CLAUSE OF THE SPECIFICATIONAS PER RELEVANT CLAUSE OF THE SP	R	Estab
10) SELF ADHESIVE POLYTHENE BAG SIZE 65 X 50 CM X 0 POINT 04 MM THICK[21]()	Specification : SELF-ADHESIVE POLYTHENE BAG SIZE 65X50CMX0.04MM THICK SPECIFICATION NO. CQA(GS)/US/434(A) EXCEPT SEALING SHALL BEOF ADHESIVE TYPE.AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION	R	Estab
11) Self Adhesive Polythene bag of size 45x35cm and point 05 MM Thick[21]()	Specification : SELF ADHESIVE POLYTHENE BAG OF SIZE - 45 X 35 CM & 0.04 MM THICK SPECIFICATION - CQA(GS)/US/434(a) Except sealing will be 'Self Adhesive'	R	Estab

Category :
Grade : Grade III
Size : S

1787

SLING INDUSTRIES
37, Kadolkar Colony, Talegaon Dabhade Kadolkar Colony Dist PUNE Maharashtra
PIN1 : 410506
Phone No. : 9552531831
GSTIN : 27ABAPM0254H1ZZ

PNER10957C

Download

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) BOX PACKING CORRU. AFK/SK-244-05[65]()	Specification : DRG. NO. AFK/SK-244-05	C	Nonestab
2) BOX PKG CORRUG.DRG.NO.AFK/SK-2582-2[14]()	Specification : DRG NO AFK/SK-2582 SHEET NO 1	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) PAPER CORR.SING 787X558X3 MM THICK[14]()	Specification : JSS 8135-08-2014	R	Nonestab
2) CORRUGATED PAPER SHEET 690 MM X 672 MM X 3 MM THICK[14]()	Specification : JSS: 8135-08:2014	R	Nonestab
3) CARTON FOR 12 BORE PAPER 2.1/2[99]()	Specification : JSS 8135-15:2016 EXCEPT CLAUSE NO. 6.4.1. (a) CHEMICAL SR. NO. (ii) (iii) AND (vi)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) CARTON BOARD 787.4X558.8X0.508MM[14]()	Specification : JSS 8135-15 :2010	R	Nonestab
2) BOARD CARTON 870 X 620 X 0.508 MM[14]()	Specification : JSS 8135-15 : 2010	R	Nonestab
3) BOARD CARTON1SIDE WHITE31X44X.03[14]()	Specification : JSS:8135-15:2016	R	Nonestab
4) CARTON FOR PACKING 12 BORE CARTG[65]()	Specification : DRG.NO.AFK/SK/2483 SHEET NO.1	C	Nonestab

Category :
Grade : Grade III
Size : S

1788

ORIENTAL ENGINEERING WORKS PVT.LTD
E-4 A, INDUSTRIAL AREA INDUSTRIAL AREA YAMUNANAGAR Haryana
PIN1 : 135001
Phone No. : 290750
GSTIN : 06AAACO8737D1ZI

PTL010225F

Download

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) FIRST SCREEN ASSEMBLY LF 6101006057[61]()	Specification : SERVICE ASSISTANCE AS PER SCOPE OF WORK	C	Nonestab
2) SECOND SCREEN ASSEMBLY LF 6101006058[61]()	Specification : SERVICE ASSISTANCE AS PER SCOPE OF WORK	C	Nonestab
3) THIRD SCREEN ASSEMBLY LF 6101006059[61]()	Specification : SERVICE ASSISTANCE AS PER SCOPE OF WORK	C	Nonestab
4) BRACKET ASSY TO 6206417015[62]()	Specification : BRACKET ASSY TO DRG NO. 175.61.004CB	C	Nonestab
5) BOOSTER ASSY TO 6206420005[62]()	Specification : BOOSTER ASSY TO DRG NO. 176.64.005CB-1CB	C	Nonestab
6) TURRET BASKET AND BRACKETS ASSY TO 6201091077[62]()	Specification : TURRET BASKET & BRACKETS ASSY TO DRG. NO. CQA(HV)5.91.271	C	Nonestab

Category :
Grade : Grade III
Size : S

1789

B.ROSHANLAL CHEMICALS PVT. LTD.
15/2, ABHISHEK NAGAR, NEMAWAR ROAD, PALDA, INDORE PALDA INDORE Madhya Pradesh
PIN1 : 452007
Phone No. : 6008605
GSTIN : 23AADCB8379F1ZM

AADCB8379F

Download

1) Ordnance Factory Bhandara

Name	Specification	Use	Status
1) SULPHURIC ACID Minimum 98% Strength[10]()	Specification : Specn No-IS:266:1993	R	Estab

Category : P
Grade : II
Size : S

1) Ordnance Factory Itarsi

[ENR Registration]

Name	Specification	Use	Status
1) OLEUM Description : OLEUM()	Specification : OLEUM AS PER SPECN. OFI/0049/SPN DT 19/4/1995 AMENDMENT NO.3 DT.13.09.96, GRADE "A"	R	Estab

Category : ddp
Grade : 1
Size : S

1790

SKM TECHNOLOGIES PRIVATE LIMITED
PLOT NO 11 DTA, TSIIC AEROSPACE PARK, ADIBATLA, IBRAHIMPATNAM HYDERABAD Telangana
PIN1 : 501510
Phone No. : 23720294
GSTIN : 36AAECS4792E1Z6

AAECS4792E

Download

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) head rocket body pre machined[01]()	Specification : SUPPLY OF HEAD ROCKET BODY (PRE-MACHINED) AS PER DRG.NO: O ROC 060 1 230 REV.1.(O ROC 060 1 230 REV.1 ) L..F No. 0126701093	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) SPRING SHACKLE[90]()	Specification : SPRING SHACKLE DRG./PART NO.F-3210122 C.0	C	Nonestab

Category :
Grade : Grade III
Size : S

1791

Moti Packaging Industries Pvt Ltd
Plot No 124 , C Block Sector 2 Noida Uttar Pradesh
PIN1 : 201301
Phone No. : 4573254
GSTIN : 09AAACM1869N1ZY

DELM01866E

Download

1) Ordnance Factory Nalanda

Name	Specification	Use	Status
1) FINAL PACKING TUBE/CYLINDER 8703 FOR M-91[65]()	Drawing No. : OFN/BMCS/M-91/M-92/FINAL PACKING TUBE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Bolangir

Name	Specification	Use	Status
1) AMMN.CONTAINER 40A/L TO DRG.PART NO ISV-415A,DC NO:35975-A[14]()	Specification : AMMN.CONTAINER 40A/L TO DRG.PART NO ISV-415A,DC NO:35975-A DT.14.07.95 SPECN:CQA(A) 2805 (H), DC NO.36145-A .	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Bolangir

Name	Specification	Use	Status
1) AMMN.CONTAINER 39 A/L DRG.PART NO- ISV-414 A, DC NO[14]()	Specification : AMMN.CONTAINER 39 A/L DRG.PART NO- ISV-414 A, DC NO-36411-A DT.23.04.98, SPECN:CQA(A) 2805 (H) DC:36145-A .	C	Nonestab

Category :
Grade : Grade III
Size : S

1792

BOBBY INDUSTRIES
16 SURENDRAMOHON GHOSH SARANI 1ST FLOOR MANGOE LANE KOLKATA West Bengal
PIN1 : 700001
Phone No. : 26672928
GSTIN : 19AAXFB2266L1ZQ

CALB22661L

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()	Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm[70]()	Specification : Mfg Supply of Ramp Back Sight ICR 1253 to DS Cat No 1005 001606 DC No 27045 SA Dt 24 03 17 fully finished with firms material required for 7 62mm	C	Nonestab

Category :
Grade : Grade III
Size : S

1793

SRVS INDUSTRIES
B-8, COOPERATIVE INDUSTRIAL ESTATE BALANAGAR HYDERABAD Telangana
PIN1 : 500037
Phone No. : 40173363
GSTIN : 36AAFFS6880D1Z0

AAFFS6880D

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR[70]()	Specification : AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL	C	Nonestab
2) SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL[70]()	Specification : SUPPLY OF TRIGGER AS PER DRG NO K2064 STAR 4 WITH FIRMS MATERIAL	C	Nonestab
3) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR 3 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab
4) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()	Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL	C	Nonestab
5) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()	Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL	C	Nonestab
6) MANUFACTURING OF REAR CROSS[70]()	Specification : MANUFACTURING AND SUPPLY OF REAR CROSS OF MGL BLANKS TO DRAWING TEND NO. 2654 WITH FIRM'S MATERIAL	C	Nonestab
7) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()	Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE	C	Nonestab
8) MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL[70]()	Specification : MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL DRAWING NO TEND 2662	C	Nonestab
9) CATCH MAGAZINE[70]()	Specification : AS PER DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BLANK FIRING ATTACHMENT 7.62 MM 1A. DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.[70]()	Specification : AS PER DS CAT NO. 1005-002050, DC NO. 16026-SA DT.10-7-79. FOR DC.No. LATTEST ISSUE TO BE FOLLOWED.	E	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PIN FIXING BARREL AS PER DRG NO K 1011 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 1011 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) RIVET BULLET GUIDE AS PER DRG NO K 1102 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 1102 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 4008	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG NO K 2025 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG. NO. K 2025	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) FRONT WASHER AS PER DRG NO K 2072 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 2072	C	Nonestab
2) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 4008	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : BULLET GUIDE AS PER DRG NO TEND 2570 STAR WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SELECTOR STOP AS PER DRG No K 1103 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG No K 1103 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) RIVET TRIGGER GUARD FRONT AS PER DRG NO K 1105 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 1105 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PIN CATCH MAGAZINE AS PER DRG NO K 1113 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO K 1113 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030[70]()	Specification : Manufacturing and supply of trigger guard sub assy as per drawing 30P 3030	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) CONVERSION FORGING TO DRG.No.: 62C 3021 200 C3. REQUIRED FOR PLATE PUSHING CARTRIDGE CASE - A3021.[00]()	Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.No.: 62C 3021 200 C3. REQUIRED FOR PLATE PUSHING CARTRIDGE CASE - A3021. "	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()	Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE	C	Nonestab
2) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()	Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()	Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()	Specification : BLANK FOR BODY COVER DRG.NO.SKM-9021 . MATERIAL- AL.FORG.TO DRG. SKM-174 TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Ring Retaining CQAI 39332[70]()	Specification : RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Bracket Supporting[70]()	Specification : BRACKET SUPPORTING DRG. NO.CQA(I)393/37 CAT./PT.NO-5340-014214.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()	Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()	Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Screw Externally Releived Body[70]()	Specification : SCREW EXTERNALLY RELEIVED BODY DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Body Trigger for MAG[61]()	Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15	C	Nonestab
2) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()	Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB	C	Nonestab
3) Steel Blank of Cylinder Gas[01]()	Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*	R	Nonestab
4) Pin Straight Headed CQA I 393 14[70]()	Specification : PIN STRAIGHT HEADED DRG.NO. CQA(I) 393/14 CAT/PT. NO.-5315-008699	C	Nonestab
5) LEAF SPRING REAR SIGHT[70]()	Specification : LEAF SPRING REAR SIGHT DRG. NO. 0204 03 02 00 01 009 00DC	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()	Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/	C	Nonestab

Category :
Grade : Grade III
Size : S

1794

Om Tech CNC
PCNTDA, Plot No. 23, Shop No. 11, Swastik Industrial Complex,Sector No. 10, Near Times of India, Bhosari, Pune 411026 Swastik Industrial Complex,Sector No. 10, Near Times of India Pune Maharashtra
PIN1 : 411026
Phone No. : 8830769679
GSTIN : 27AABFO5065C1ZI

AABFO5065C

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL[70]()	Specification : MANUFACTURING AND SUPPLY OF BASE SIGHT GLASS OF MGL DRAWING NO TEND 2662	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()	Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR[70]()	Specification : AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL	C	Nonestab
2) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO TEND2450 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL	C	Nonestab
3) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()	Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)	C	Nonestab
4) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()	Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION	C	Nonestab
5) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()	Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR	C	Nonestab
6) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()	Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL	C	Nonestab
7) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()	Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL	C	Nonestab
8) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()	Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL	C	Nonestab
9) HOUSING TRIGGER MECHANISM FOR MSL[70]()	Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL	C	Nonestab
10) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()	Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE	C	Nonestab
11) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()	Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL	C	Nonestab
12) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()	Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001	C	Nonestab
13) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL	C	Nonestab
14) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]()	Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) LAUNCHER SHAFT[70]()	Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL	C	Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL	C	Estab
3) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
4) PRE MACHINED BLANK FOR RECEIVER BODY AS PER DRG NO TEND 2685 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04101[70]()	Specification : AS PER OFT REQUIRMENTS	R	Nonestab
5) PRE MACHINED BLANK FOR RECEIVER BUSHING AS PER DRG NO TEND 2682 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P 04010[70]()	Specification : AS PER OFT REQUIREMENT	R	Nonestab
6) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()	Specification : AS PER OFB REQUIREMENTS	R	Nonestab
7) HAMMER TO DRG NO 44P06013[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
8) RETAINING BLOCK TO DRG NO 44P 06104[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
9) 20MM FIRING PIN TO DRG NO 44P03013[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
10) 14 5MM FIRING PIN TO DRG NO 44P14009[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) BLANK FOR BODY COVER FOR MAG 7 62MM[01]()	Specification : BLANK FOR BODY COVER DRG.NO.SKM-9021 . MATERIAL- AL.FORG.TO DRG. SKM-174 TO BE SUPPLIED BY FACTORY FROM L.F.NO.0614279001 AGAINST B/G	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Machining of CAP of 9MM Carbine in finished condition[70]()	Specification : MACHINING OF CAP OF 9MM CARBINE IN FINISHED CONDITION DS CAT NO 1005-000860 DC(I)NO 26881-SA DT01.7.16 FROM IC OF CAP (MATERIAL TO BE SUPPLIED BY FACTORY AGAINST BANK GUARANTEE LF NO 0133077013)	C	Nonestab
2) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()	Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) PISTON FOR JVPC ALFA[70]()	Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA	C	Nonestab
2) CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA[70]()	Specification : CLOSING CUP DRG. NO. 0204 03 04 00 03 001 00DA.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) Complete machining of remover 9 A 62109 001 from input material IC 7299000234 to be supplied by GSF IC 9140701109[91]()	Specification : Complete machining of remover (9-A-621.09.001) from input material I/C- 7299000234 to be supplied by GSF (I/C-9140701109)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]()	Specification : AS PER DRAWING	C	Nonestab
2) SLIDE TO DRG NO CTM 166[70]()	Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()	Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) RETAINER TO DRG NO 9002 00 01 00 00 003 00TA IN FINISH CONDITION[62]()	Specification : RETAINER TO DRG. NO. 9002-00-01-00-00-003-00TA IN F/C	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL	C	Nonestab
2) MSL LAUNCHER[70]()	Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL	C	Nonestab
3) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()	Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) PREMACHINED BLANK FOR M2HB GUN BLOCK TRUNNION OO50BMG AS PER DRG NO TEND 2672[74]()	Specification : PRE-MACHINED BLANK FOR M2HB GUN BLOCK, TRUNNION, OO50BMG AS PER DRG. NO. TEND-2672	C	Nonestab
2) PREMACHINED BLANK FOR M2HB GUN BOLT ALTERNATE FEED OO50BMG AS PER DRG NO TEND 2670[74]()	Specification : PRE-MACHINED BLANK FOR M2HB GUN BOLT, ALTERNATE FEED , OO50BMG AS PER DRG. NO. TEND-2670	C	Nonestab
3) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()	Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) INPUT BLANKS OF BLOCK GAS TO TEND 1966STAR WITH FIRMS MATERIAL FOR RIFLE 7POINT62 1A1 ICR 1322[70]()	Specification : AS PER TEND 1966* WITH FIRMS MATERIAL FOR RIFLE 7.62 1A1 (ICR- 1322)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL[70]()	Specification : SET OF FRONT SIGHT K 1032 STAR 3 HOUSING FRONT SIGHT K 1031 STAR 2 AND SLEEVE FRONT SIGHT K 1033 STAR AS PER DRG WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()	Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR2 FROM OFT MATERIAL[70]()	Specification : MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR 2 FROM OFT MATERIAL	R	Nonestab
2) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()	Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) ADAPTER BUSH FOR 81MM AT AL[62]()	Specification : DRG.NO.CQA(A) DRG.NO.PYRO/SK/0275 Det No.23dt 11.04.19	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Dehu Road

Name	Specification	Use	Status
1) MACHINING OF FORGED CANISTER[63]()	Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address : Govt. Of India, Ministry of Defence (DGQA) Controllerate of Quality Assurance (Amn), Khadki, Pune- 411 003 Telephone: 25824013-	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()	Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003	C	Nonestab
2) RINGH WELDING AND MACHINING BOF 4026964[90]()	Specification : RINGH WELDING AND MACHINING BOF 4026964	C	Nonestab
3) RINGH WELDING AND MACHINING TO PART NO BOF 4020632[90]()	Specification : RINGH WELDING AND MACHINING TO PART NO BOF 4020632	C	Nonestab
4) PEDAL WELDING AND MACHINING 5045062[90]()	Specification : PEDAL WELDING AND MACHINING 5045062	C	Nonestab
5) COVER WELDING AND MACHINING TO DRG NO 3019272[90]()	Specification : COVER WELDING AND MACHINING TO DRG NO 3019272	C	Nonestab
6) LEVER WELDING AND MACHINING DRG NO 6098805[90]()	Specification : LEVER WELDING AND MACHINING DRG NO 6098805	C	Nonestab

Category :
Grade : Grade III
Size : S

1795

SRP GEARS PRIVATE LIMITED
F14. 2ND MAIN ROAD AMBATTUR INDUSTRIAL ESTATE, CHENNAI Tamil Nadu
PIN1 : 600058
Phone No. : 26251716
GSTIN : 33AAACE1411E1ZK

CHEE00133A

Download

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) FRONT SIGHT BLOCK BLANK S3 L F No 7024012072[70]()	Specification : AS ER DRG No.TEND 2508 (for K 1207)	R	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()	Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING OF REAR CROSS[70]()	Specification : MANUFACTURING AND SUPPLY OF REAR CROSS OF MGL BLANKS TO DRAWING TEND NO. 2654 WITH FIRM'S MATERIAL	C	Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL	C	Nonestab
3) PRE MACHINED BLANK RING MOUNT AS PER DR NO TEND 2678 WITH FIRMS MATERIAL WITHOUT HEAT TREATMENT REQUIRED FOR AMR 44P05007[70]()	Specification : AS PER OFT REQUIREMENTS	R	Nonestab
4) Manufature and supply of CATCH COCKING HANDLE TO DS CAT NO 1005 001547 ICR 1287 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR RIFLE 7 62MM 1A1[70]()	Specification : AS PER THE SPECIFICATION GIVEN	E	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MSL HOUSING LAUNCHER[70]()	Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL	C	Nonestab
2) MSL LAUNCHER[70]()	Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2658 FOR MSL LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL	C	Nonestab
3) LAUNCHER SHAFT[70]()	Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL	C	Nonestab
4) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL	C	Nonestab
5) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()	Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) BODY HOUSING BLANK[70]()	Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC[70]()	Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56MM AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FOR JVPC[70]()	Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-03-02-15-000-00DC	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) GAS CYLINDER COVER MOULDING FOR JVPC[70]()	Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DB	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) Cylinder Gas for LMG Belt Fed[70]()	Specification : Cylinder Gas (Exdptl) DRG No. ARDE/SK/108/010 for LMG 7.62 MM Belt Fed	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.[70]()	Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56M AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) SLIDE FOR 0.32 PISTOL.[70]()	Specification : STEEL BS:970 PT .1. 1994 GRADE 070 M55 (EN-9) TREATMENT:-BEFORE MACHINING 220 TO 260 HV	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) SLIDE FOR 0.32 PISTOL.[70]()	Specification : STEEL BS:970 PT .1. 1994 GRADE 070 M55 (EN-9) TREATMENT:-BEFORE MACHINING 220 TO 260 HV	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) BLOCK REAR BLANK FOR GHAATAK[70]()	Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) BLANK FOR BARREL EXTENSION UP TO OPERATION STAGE V[79]()	Specification : BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*7-S.(DC-01/006/18, DT-14-06-2018)FOR RIFLE 5.56MM INSAS. MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR 2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR[70]()	Specification : MANUFACTURING AND SUPPLY OF INPUT BLANKS FOR REAR SIGHT BLOCK S4 AS PER DRG NO TEND 2634 STR2 FROM IC WITH OFT MATERIAL REQUIRED FOR TAR	C	Nonestab
2) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()	Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL	C	Nonestab
3) 14 5mm BOLT BODY TO DRG NO 44P 14010[70]()	Specification : AS PER OFT REQUIREMENTS	C	Nonestab
4) 20MM BOLT BODY TO DRG NO 44P 03004[70]()	Specification : AS PER OFT REQUIREMENTS	C	Nonestab
5) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()	Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC SK-JVPC-108[70]()	Specification : BLANK OF BARREL EXTENSION FOR JVPC 5.56 mm SK-JVPC-108	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) BODY HOUSING BLANK[70]()	Specification : BODY HOUSING BLANK TO DRG NO. AKC-03/1M FOR CARBINE 5.56MM.	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()	Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),	R	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) PISTON EXTENSION BLANK FOR CARBINE 5 56MM[70]()	Specification : PISTON EXTENSION BLANK TO DRG NO. AKC-07/01BL*1 FOR CARBINE 5.56MM.	C	Nonestab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()	Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) BIPOD ASSY. TO DSCAT NO. 1005-557897 FOR MG 5.56 MM consisting of 24 components[72]()	Specification : AS PER DRG.	C	Nonestab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143[04]()	Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) Barrel Extension Blank up to Stage V for JVPC[70]()	Specification : Barrel Extension Blank up to Stage 'V' to drg. No. SK-JVPC-1087* for JVPC 5.56 MM with SAF material (I/Code-7012470452)	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Small Arms Factory

Name	Specification	Use	Status
1) BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94[70]()	Specification : BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()	Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : M

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]()	Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5	C	Nonestab
2) SELECTOR LEVER AS PER DRGNOK 2074 WITH FIRMS MATERIAL[70]()	Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL	C	Nonestab
3) SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL[70]()	Specification : SUPPLY OF HAMMER AS PER DRG NO K 2061 STAR2 WITH FIRMS MATERIAL	C	Nonestab
4) SUPPLY OF LOWER HAND GUARD LOCK PLATE AS PER DRG No K 3011 STAR REQUIRED FOR TAR[70]()	Specification : AS PER DRG No.K-3011* REQUIRED FOR TAR	C	Nonestab

Category :
Grade : Grade III
Size : M

1796

Zenith Industrial Rubber Products Pvt. Ltd.
A-2, Parekh Mahal, 80 Veer Nariman Rd. Churchgate Mumbai MH
PIN1 : 421203
Phone No. : 0251-6450991
GSTIN : 27AAACA3874D1ZW

MUMZ01247B

Download

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) Rubber Sheet/ Rubber band()	As per specification	R	Established
2) Polychloprene()	CQAE/9320/1372(f)	R	Established
3) Other Rubberized Fabrics()	As per specification	R	Established
4) Rubber Mat (Electrical Purpose)()	IS:5424	R	Established

Category : P
Grade : II
Size : S

1797

Santram Engineering Works
123/428(old), 123/699(new), Fazal Ganj Kanpur Uttar Pradesh
PIN1 : 208012
Phone No. : 2230696
GSTIN : 09AAYFS2731C1ZY

AAYFS2731C

Download

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) Sliding Bar Buckle()	As per specification	C	Not Estab
2) Snap Hook Static Line PTRM()	As per specification	C	Not Estab
3) Quick Release Connecting Lug PTRM()	As per specification	C	Not Estab
4) Buckle V Shaped with Sliding Bar()	As per specification	C	Not Estab
5) Snap Hook Quick Ejector()	As per specification	C	Not Estab
6) Canopy Release Assy. With Wire Loop()	As per specification	C	Not Estab
7) Lift Web Spacer()	As per specification	C	Not Estab
8) Spring Rip Cord Pocket Main()	As per specification	C	Not Estab
9) Safety Pin for Snap Hook Static Line ()	As per specification	C	Not Estab
10) Soulder Adjustable Buckle()	As per specification	C	Not Estab
11) Triangular D Ring for Cargo Parachute()	As per specification	C	Not Estab
12) Buckle D Shaped PTRM()	As per specification	C	Not Estab
13) Buckle Waist Adjustable ()	As per specification	C	Not Estab
14) Canopy Rigging Link Detachable()	As per specification	C	Not Estab
15) Quick Adjustable Buckle()	As per specification	C	Not Estab
16) Rip Cord Handle()	As per specification	C	Not Estab
17) D. Ring()	As per specification	C	Not Estab
18) Snap Hook type PTRR with Pin()	As per specification	C	Not Estab
19) Quick Release Snap Hook Device()	As per specification	C	Not Estab
20) Buckle Pack Outer()	As per specification	C	Not Estab
21) Adjustable Buckle for Rucksack Airborne ()	As per specification	C	Not Estab
22) 3-Ring Release System Ring Large()	As per specification	C	Not Estab
23) 3-Ring Release System Ring Small, Medium ()	As per specification	C	Not Estab
24) Adjustable Buckle MK-1()	As per specification	C	Not Estab
25) Assembly of Double Sliding Bar V Buckle for Rucksack Airborne()	As per specification	C	Not Estab
26) Attachment Ring for Set Strap Release Cargo ()	As per specification	C	Not Estab
27) Auxilliary Spring for BP for Mirage 2000 A/C()	As per specification	C	Not Estab
28) Auxilliary Spring for PTAR Parachute()	As per specification	C	Not Estab
29) Auxilliary Spring for PTRR Parachute 7.30M()	As per specification	C	Not Estab
30) Bridle Ring for Jaguar A/C()	As per specification	C	Not Estab
31) Buckle ()	As per specification	C	Not Estab
32) Buckle D Angular()	As per specification	C	Not Estab
33) Buckle & Buckle Strap for AN-32 A/C()	As per specification	C	Not Estab
34) Buckle Brass Quick Release ED MK-II()	As per specification	C	Not Estab
35) Buckle Brass Quick Release MK-II()	As per specification	C	Not Estab
36) Buckle Copper 25MM()	As per specification	C	Not Estab
37) Buckle Pack Outer PTRM()	As per specification	C	Not Estab
38) Buckle Special Al Alloy Seat()	As per specification	C	Not Estab
39) Buckle Steel 38MM & 48MM()	As per specification	C	Not Estab
40) Buckle Waist Adjustable Adopter (Sliding Bar) PTRM ()	As per specification	C	Not Estab
41) Buckle with Bar()	As per specification	C	Not Estab
42) Canopy Release Assy.()	As per specification	C	Not Estab
43) Canopy Rigging Link Detachable PTRM()	As per specification	C	Not Estab
44) Coil Spring for SU-30 A/C()	As per specification	C	Not Estab
45) Coil Spring for Tail Unit()	As per specification	C	Not Estab
46) Coil Spring for Auxilliary of BP Hunter A/C()	As per specification	C	Not Estab
47) Coil Spring for BP for Mig-21 A/C()	As per specification	C	Not Estab
48) Coil Spring for Mig-29()	As per specification	C	Not Estab
49) Coil Spring Modified ()	As per specification	C	Not Estab
50) Coil Spring with Cone for BP for Mirage 2000 A/C()	As per specification	C	Not Estab
51) Connecting Lug of Auxilliary Para()	As per specification	C	Not Estab
52) Curved Pin ()	As per specification	C	Not Estab
53) Grommet with Washer 16 MM()	As per specification	C	Not Estab
54) Holding Buckle()	As per specification	C	Not Estab
55) Lug Metal Air Crew Para()	As per specification	C	Not Estab
56) Pulley()	As per specification	C	Not Estab
57) Toing Ring Large-82MM()	As per specification	C	Not Estab
58) Toing Ring Small 14.5MM()	As per specification	C	Not Estab
59) Rip Cord Large()	As per specification	C	Not Estab
60) Metallic Buckle ()	As per specification	C	Not Estab
61) Housing Sub Assembly()	As per specification	C	Not Estab
62) Harness Attachment Lug()	As per specification	C	Not Estab
63) Lacing D Ring ()	As per specification	C	Not Estab
64) Pin Securing Flap()	As per specification	C	Not Estab
65) Reel()	As per specification	C	Not Estab

Category : DDP,DP
Grade : II
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) QUICK ADJUSTABLE BUCKLE[99]()	Specification : ADRDE/205(c)	R	Estab
2) SNAP HOOK QUICK EJECTOR[99]()	Specification : ADRDE/1210	R	Estab
3) ADJUSTABLE BUCKLE FOR RUCKSACK AIRBORNE[99]()	Specification : ADRDE/1452-04-001	R	Estab
4) BRIDLE RING FOR JAGUAR A/C[99]()	Specification : ADRDE/269(b)	R	Estab
5) BUCKLE[99]()	Specification : ADRDE/1429-01	R	Estab
6) BUCKLE D ANGULAR[99]()	Specification : ADRDE/286	R	Estab
7) BUCKLE & BUCKLE STRAP FOR AN-32 A/C[99]()	Specification : DRD/355/97	R	Estab
8) BUCKLE V SHAPED WITH SLIDING BAR[99]()	Specification : ADRDE/1211	R	Estab
9) BUCKLE WITH BAR[99]()	Specification : ADRDE/1430	R	Estab
10) CANOPY RIGGING LINK DETACHABLE PTRM[99]()	Specification : CQA(GS)/US/371	R	Estab
11) COIL SPRING FOR SU-30 A/C[99]()	Specification : ADRDE/1402-03-002	R	Estab
12) COIL SPRING FOR TAIL UNIT[99]()	Specification : ADRDE/1159-A1/SA-8-5	R	Estab
13) COIL SPRING MODIFIED[99]()	Specification : ADRDE/271 (b)	R	Estab
14) CURVED PIN[99]()	Specification : ADRDE/270	R	Estab
15) LACING D RING[99]()	Specification : ADRDE/1229( c )	R	Estab
16) REEL[99]()	Specification : DRD/225/94	R	Estab
17) PULLEY[99]()	Specification : ADRDE/311	R	Estab
18) SLIDING BAR BUCKLE[99]()	Specification : IND/GS/1717(a)	R	Estab
19) BUCKLE D SHAPED PTRM[99]()	Specification : IND/GS/1798	R	Estab
20) BUCKLE WAIST ADJUSTABLE[99]()	Specification : IND/GS/1802	R	Estab
21) CANOPY RIGGING LINK DETACHABLE[99]()	Specification : IND/GS/1801	R	Estab
22) RIP CORD HANDLE[99]()	Specification : ADRDE/1468/07	R	Estab
23) LIFT WEB SPACER[99]()	Specification : ADRDE/195(a)	R	Estab
24) SNAP HOOK TYPE PTRR WITH PIN[99]()	Specification : ADRDE/163(a)	R	Estab
25) BUCKLE PACK OUTER[99]()	Specification : IND/GS/1795	R	Estab
26) SAFETY PIN FOR SNAP HOOK STATIC LINE[99]()	Specification : IND / GS / 1753	R	Estab
27) BUCKLE COPPER 25MM[99]()	Specification : ADRDE/1452 - 0 - 004	R	Estab
28) QUICK RELEASE SNAP HOOK DEVICE[99]()	Specification : ADRDE/112(d)	R	Estab
29) HOLDING BUCKLE[99]()	Specification : ADRDE/1297-01(a)	R	Estab
30) METALLIC BUCKLE[99]()	Specification : AS PER SPECIFICATION	R	Estab
31) PIN SECURING FLAP[99]()	Specification : ADRDE/786-SA-3	R	Estab
32) Snap Hook Static Line PTRM[99]()	Specification : As per specification	R	Estab
33) Quick Release Connecting Lug PTRM[99]()	Specification : As per specification	R	Estab
34) Canopy Release Assy. With Wire Loop[99]()	Specification : As per specification	R	Estab
35) Spring Rip Cord Pocket Main[99]()	Specification : As per specification	R	Estab
36) Soulder Adjustable Buckle[99]()	Specification : As per specification	R	Estab
37) Triangular D Ring for Cargo Parachute[99]()	Specification : As per specification	R	Estab
38) D. Ring[99]()	Specification : As per specification	R	Estab
39) 3-Ring Release System Ring Large[99]()	Specification : As per specification	R	Estab
40) 3-Ring Release System Ring Small, Medium [99]()	Specification : As per specification	R	Estab
41) Adjustable Buckle MK-1[99]()	Specification : As per specification	R	Estab
42) Assembly of Double Sliding Bar V Buckle for Rucksack Airborne[99]()	Specification : As per specification	R	Estab
43) Attachment Ring for Set Strap Release Cargo [99]()	Specification : As per specification	R	Estab
44) Auxilliary Spring for BP for Mirage 2000 A/C[99]()	Specification : As per specification	R	Estab
45) Auxilliary Spring for PTAR Parachute[99]()	Specification : As per specification	R	Estab
46) Auxilliary Spring for PTRR Parachute 7.30M[99]()	Specification : As per specification	R	Estab
47) Buckle Brass Quick Release ED MK-II[99]()	Specification : As per specification	R	Estab
48) Buckle Brass Quick Release MK-II[99]()	Specification : As per specification	R	Estab
49) Buckle Pack Outer PTRM[99]()	Specification : As per specification	R	Estab
50) Buckle Special Al Alloy Seat[99]()	Specification : As per specification	R	Estab
51) Buckle Steel 38MM & 48MM[99]()	Specification : As per specification	R	Estab
52) Buckle Waist Adjustable Adopter (Sliding Bar) PTRM [99]()	Specification : As per specification	R	Estab
53) Canopy Release Assy.[99]()	Specification : As per specification	R	Estab
54) Coil Spring for Auxilliary of BP Hunter A/C[99]()	Specification : As per specification	R	Estab
55) Coil Spring for BP for Mig-21 A/C[99]()	Specification : As per specification	R	Estab
56) Coil Spring for Mig-29[99]()	Specification : As per specification	R	Estab
57) Coil Spring with Cone for BP for Mirage 2000 A/C[99]()	Specification : As per specification	R	Estab
58) Connecting Lug of Auxilliary Para[99]()	Specification : As per specification	R	Estab
59) Grommet with Washer 16 MM[99]()	Specification : As per specification	R	Estab
60) Lug Metal Air Crew Para[99]()	Specification : As per specification	R	Estab
61) Toing Ring Large-82MM[99]()	Specification : As per specification	R	Estab
62) Toing Ring Small 14.5MM[99]()	Specification : As per specification	R	Estab
63) Rip Cord Large[99]()	Specification : As per specification	R	Estab
64) Housing Sub Assembly[99]()	Specification : As per specification	R	Estab
65) Harness Attachment Lug[99]()	Specification : As per specification	R	Estab
66) COIL SPRING RTU.[2110050007]()	Specification : DRAWING NO. : ADRDE/1041A-1/SA-1	R	Nonestab

Category : DDP,DP
Grade : II
Size :

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) QUICK ADJUSTABLE BUCKLE[99]()	Specification : ADRDE/205(c)	R	Estab
2) SNAP HOOK QUICK EJECTOR[99]()	Specification : ADRDE/1210	R	Estab
3) ADJUSTABLE BUCKLE FOR RUCKSACK AIRBORNE[99]()	Specification : ADRDE/1452-04-001	R	Estab
4) BRIDLE RING FOR JAGUAR A/C[99]()	Specification : ADRDE/269(b)	R	Estab
5) BUCKLE ADRDE/PAS/2008/22[2010019021]()	Specification : SPECN.NO:-ADRDE/PAS/2008/22.	R	Nonestab
6) BUCKLE D ANGULAR[99]()	Specification : ADRDE/286	R	Estab
7) BUCKLE & BUCKLE STRAP FOR AN-32 A/C[99]()	Specification : DRD/355/97	R	Estab
8) BUCKLE V SHAPED WITH SLIDING BAR[99]()	Specification : ADRDE/1211	R	Estab
9) BUCKLE WITH BAR[99]()	Specification : ADRDE/1430	R	Estab
10) CANOPY RIGGING LINK DETACHABLE PTRM[99]()	Specification : CQA(GS)/US/371	R	Estab
11) COIL SPRING (I.CODE 2110025024[2110025024]()	Specification : DRNG. NO.ADRDE/1402-03-002	R	Nonestab
12) COIL SPRING FOR TAIL UNIT[99]()	Specification : ADRDE/1159-A1/SA-8-5	R	Estab
13) COIL SPRING MODIFIED[99]()	Specification : ADRDE/271 (b)	R	Estab
14) CURVED PIN[99]()	Specification : ADRDE/270	R	Estab
15) LACING D RING[99]()	Specification : ADRDE/1229( c )	R	Estab
16) REEL[99]()	Specification : DRD/225/94	R	Estab
17) PULLEY[99]()	Specification : ADRDE/311	R	Estab
18) SLIDING BAR BUCKLE[99]()	Specification : IND/GS/1717(a)	R	Estab
19) BUCKLE D SHAPED PTRM[99]()	Specification : IND/GS/1798	R	Estab
20) BUCKLE WAIST ADJUSTABLE[99]()	Specification : IND/GS/1802	R	Estab
21) CANOPY RIGGING LINK DETACHABLE[99]()	Specification : IND/GS/1801	R	Estab
22) RIP CORD HANDLE[99]()	Specification : ADRDE/1468/07	R	Estab
23) LIFT WEB SPACER[99]()	Specification : ADRDE/195(a)	R	Estab
24) SNAP HOOK TYPE PTRR WITH PIN[99]()	Specification : ADRDE/163(a)	R	Estab
25) BUCKLE PACK OUTER[99]()	Specification : IND/GS/1795	R	Estab
26) SAFETY PIN FOR SNAP HOOK STATIC LINE[99]()	Specification : IND / GS / 1753	R	Estab
27) BUCKLE COPPER 25MM[99]()	Specification : ADRDE/1452 - 0 - 004	R	Estab
28) QUICK RELEASE SNAP HOOK DEVICE[99]()	Specification : ADRDE/112(d)	R	Estab
29) HOLDING BUCKLE[99]()	Specification : ADRDE/1297-01(a)	R	Estab
30) METALLIC BUCKLE[99]()	Specification : AS PER SPECIFICATION	R	Estab
31) PIN SECURING FLAP[2110038023]()	Specification : SPECN NO.ADRDE/786-SA-3(b)	R	Nonestab
32) Snap Hook Static Line PTRM[99]()	Specification : As per specification	R	Estab
33) QUICK RELEASE CONNECTOR (FOR PILOT PARA JAGUAR A/C.)[2110075020]()	Specification : SPCN.NO.AS PER ADRDE/1455	R	Nonestab
34) Canopy Release Assy. With Wire Loop[99]()	Specification : As per specification	R	Estab
35) SPRING FOR RIP CORD POCKET FOR PSM SERIES 3,4,& 5[2010068059]()	Specification : DRG.NO:-ADRDE/PAS/2008/27	R	Nonestab
36) Soulder Adjustable Buckle[99]()	Specification : As per specification	R	Estab
37) Triangular D Ring for Cargo Parachute[99]()	Specification : As per specification	R	Estab
38) D. Ring[99]()	Specification : As per specification	R	Estab
39) 3-Ring Release System Ring Large[99]()	Specification : As per specification	R	Estab
40) 3-Ring Release System Ring Small, Medium [99]()	Specification : As per specification	R	Estab
41) Adjustable Buckle MK-1[99]()	Specification : As per specification	R	Estab
42) Assembly of Double Sliding Bar V Buckle for Rucksack Airborne[99]()	Specification : As per specification	R	Estab
43) Attachment Ring for Set Strap Release Cargo [99]()	Specification : As per specification	R	Estab
44) Auxilliary Spring for BP for Mirage 2000 A/C[99]()	Specification : As per specification	R	Estab
45) Auxilliary Spring for PTAR Parachute[99]()	Specification : As per specification	R	Estab
46) Auxilliary Spring for PTRR Parachute 7.30M[99]()	Specification : As per specification	R	Estab
47) Buckle Brass Quick Release ED MK-II[99]()	Specification : As per specification	R	Estab
48) Buckle Brass Quick Release MK-II[99]()	Specification : As per specification	R	Estab
49) Buckle Pack Outer PTRM[99]()	Specification : As per specification	R	Estab
50) Buckle Special Al Alloy Seat[99]()	Specification : As per specification	R	Estab
51) Buckle Steel 38MM & 48MM[99]()	Specification : As per specification	R	Estab
52) Buckle Waist Adjustable Adopter (Sliding Bar) PTRM [99]()	Specification : As per specification	R	Estab
53) Canopy Release Assy.[99]()	Specification : As per specification	R	Estab
54) Coil Spring for Auxilliary of BP Hunter A/C[99]()	Specification : As per specification	R	Estab
55) Coil Spring for BP for Mig-21 A/C[99]()	Specification : As per specification	R	Estab
56) Coil Spring for Mig-29[99]()	Specification : As per specification	R	Estab
57) Coil Spring with Cone for BP for Mirage 2000 A/C[99]()	Specification : As per specification	R	Estab
58) Connecting Lug of Auxilliary Para[99]()	Specification : As per specification	R	Estab
59) Grommet with Washer 16 MM[99]()	Specification : As per specification	R	Estab
60) Lug Metal Air Crew Para[99]()	Specification : As per specification	R	Estab
61) Toing Ring Large-82MM[99]()	Specification : As per specification	R	Estab
62) Toing Ring Small 14.5MM[99]()	Specification : As per specification	R	Estab
63) Rip Cord Large[99]()	Specification : As per specification	R	Estab
64) Housing Sub Assembly[99]()	Specification : As per specification	R	Estab
65) LOWER HARNESS LUG[2110075008]()	Specification : DRG.NO.ADRDE/1336 (b)	R	Nonestab
66) COIL SPRING RTU.[2110050007]()	Specification : DRAWING NO. : ADRDE/1041A-1/SA-1	R	Estab
67) MBEU 7074 PA HARDSHELL CONTAINER FOR JAGUAR PILOT PARA[2110075026]()	Specification : DRG. NO. ADRDE/1454-00(b)	R	Nonestab
68) 5430-006726 SNAP HOOK FOR PARACHUTE TYPE PTR-R[2110008501]()	Specification : SPCN.NO.IND/GS/1815 (b)	R	Nonestab
69) A4/5315-004372 LOCKING PIN FOR SNAP HOOK FOR PP TYPE PTR-R 7.30M[2110340003]()	Specification : SPCN.NO.IND/GS/1826(a)	R	Nonestab
70) ADJUSTMENT BUCKLE[2111080016]()	Specification : DRAWING NO. ADRDE/193(a).	R	Nonestab
71) ALUMI NAME PLATE FOR GEMINI CRAFT[9911037682]()	Specification : As per NCD 4006 Issue-3 Mar 2014	R	Nonestab
72) ALUMINIUM ALLOY WIRE 4(8 SWG) 64430 TO IS:739-1977 CONDITION WP.[9911036497]()	Specification : IS:739-1977 CONDITION WP.	R	Nonestab
73) ALUMINIUM RIVET (DIA=2MM,LENGTH=13MM)[2110068052]()	Specification : SPECN-BEST TRADE QUALITY.	R	Nonestab
74) ALUMINIUM TUBE[2110025028]()	Specification : DRG. NO.ADRDE/1402-08	C	Nonestab
75) Assembly female Coupling of DWL Jaguar A/C[2110075034]()	Specification : ADRDE/1344(a)	R	Nonestab
76) Assy. Coil Spring[2110019022]()	Specification : Drg. No. 1.3.01-02-01(a) Sheet no. 2 of 3 For : Dia 36 += 2 mm Read : Dia 56 += 2 mm	R	Nonestab
77) BALL TYPE SPRING[2110068033]()	Specification : DRG./SPECN.NO.ADRDE/1332-G(a) DRD/71/98	R	Nonestab
78) BOLT WITH NUT LARGE SS AISI GD 316[9911035533]()	Specification : BOLT WITH NUT(LARGE)STN.STEEL AISI GD.316 FOR BOAT INFLATABLE	R	Nonestab
79) BOLT WITH NUTSMALL SS AISI GD 316[9911035532]()	Specification : BOLT WITH NUT(SMALL) STN.STEEL AISI GD.316 FOR BOAT INFLATABLE	R	Nonestab
80) BRASS EYELET 28 MM WITH WASHER[9911037674]()	Specification : Best trade quality	R	Nonestab
81) BUCKLE, ADRDE/1428[2110029013]()	Specification : DRG.NO.DRD/356/96, ADRDE/1428	R	Nonestab
82) BUCKLE ADRDE/1429-01[2110029012]()	Specification : DRG.NO.DRD/344/96	R	Nonestab
83) BUCKLE LEG & BREAST ADOPTER[2010019023]()	Specification : SPECN-NO:- DRG.NO.ADRDE/1352.	R	Nonestab
84) BUSH FOR KEEL SS AISI GD 316[9911035530]()	Specification : BUSH FOR KEEL STN.STEEL AISI GD.316 FOR BOAT INFLATABLE SPECIFICATION :- AS PER SAMPLE APPROVED	R	Nonestab
85) BUSH FOR N R V[9911035354]()	Specification : BUSH FOR N.R.V.(AL ALLOY IS:737-1974) SPECN.NO.AS PER SAMPLE/DRG.	R	Nonestab
86) CANOPY RIGGING LINK WITH BOLT FOR PSM SERIES[2010068061]()	Specification : DRG.NO.ADRDE/1314-G"a ".	R	Nonestab
87) CAT PART NO. 4010-002764 WIRE ROPE FOR PARACHUTE SYSTEM FOR CARLGUSTAF 84mm ILLUMINATING AMMUNITION[2110032003]()	Specification : SPECN: IND/GS/1887.	R	Nonestab
88) CIRCULAR BRASS SHEET 1.5 MM THICK X 30 MM DIA[2103055062]()	Specification : SPEC./DRG. NO. IMPD-0928/A	R	Nonestab
89) CLIP SAFETY FOR 4 POINT QUICK RELEASE BOX (ACCT).[2110036000]()	Specification : DRAWING NO. ADRDE/143 (b)	R	Nonestab
90) COIL SPRING (I.CODE 6055)[2110036055]()	Specification : SPECN-ADRDE/1.6.03.05-04-04,sheet no.9/11	R	Nonestab
91) COIL SPRING (MIG-29) I.CODE 002[2110019002]()	Specification : SPECN NO.ADRDE/1235-SA-2(b).	R	Nonestab
92) CONE BASE[2110071021]()	Specification : DRG.NO.:ADRDE/1367(a) DRD/14/98.	R	Nonestab
93) CONE TOP[2110071011]()	Specification : DRG. NO. :ADRDE/1320(a) DRD/59/98	R	Nonestab
94) CONES PACK LOCKING FOR CHEST TYPE PARA[1460100000]()	Specification : SPECN. NO. ADRDE/124(b)	R	Nonestab
95) CONNECTING LUG for PP JAGUAR[2110075013]()	Specification : DRG.NO.ADRDE/1339	R	Nonestab
96) CONNECTING LUG (BEND)[2110071003]()	Specification : DRG. NO.:ADRDE/1295(a) DRD/28/98.	R	Nonestab
97) CONNECTOR ‘D’ RING AIR CREW PARACHUTE[2110048004]()	Specification : DRG. NO. ADRDE/200(a)	R	Nonestab
98) D HOOK[9911023400]()	Specification : SPECN-IMPD-0437	R	Nonestab
99) D RING (I/CODE 71010)[2110071010]()	Specification : DRG. NO. ADRDE/1298 (a) DRD/31/98	R	Nonestab
100) D RING for PP JAGUAR[2110075007]()	Specification : DRG.NO.ADRDE/1337	R	Nonestab
101) D RING LARGE SS AISI GD 316[9911035528]()	Specification : "D" RING (LARGE)STN.STEEL AISI GD.316 FOR BOAT INFLATABLE	R	Nonestab
102) D Ring Lower for Folding Bailer Radius 76 mm[9911037578]()	Specification : Material as per item no. 02 of Drawing no.IMPD 0417 and Shape as per Drawing	R	Nonestab
103) D RING OF ROD THICKNESS 8 MM[9911037675]()	Specification : Stainless Steel AISI Grade 316 As per Drawing OPF/G.C./2019 D Ring	R	Nonestab
104) D RING SMALL SS AISI GD 316[9911035529]()	Specification : "D" RING(SMALL) STN.STEEL AISI GD.316 FOR BOAT INFLATABLE	R	Nonestab
105) D Ring Upper for Folding Bailer Radius 51 mm[9911037577]()	Specification : D-Ring Upper for Folding Bailer (Radius- 51 mm)	R	Nonestab
106) DETACHABLE ALIGNMENT RING[2110071009]()	Specification : DRG.NO.:ADRDE/1296-G(b) DRD/29/98.	R	Nonestab
107) DETACHABLE ALIGNMENT RING FOR PILOT PARACHUTE JAGUARE A/C[2110079012]()	Specification : DRG.NO.ADRDE/1342.	R	Nonestab
108) DETACHABLE SHROUD LINK[2110071001]()	Specification : DRG. NO.:ADRDE/1299-G(c) DRD/32/98	R	Nonestab
109) DISC 155 + - 3 MM THICK 1.8 +0.2/- 0.0 MM[2110036056]()	Specification : SPECN-ADRDE/1.6.03.05-04-04,sheet no.8/11	R	Nonestab
110) DISC FOR BALL TYPE AUXIALARY[2010068056]()	Specification : DRG.NO.ADRDE/1389	R	Nonestab
111) DISCONNECT LOCK WITH BUCKLE[2110019013]()	Specification : DRG.NO.ADRDE/1355.	C	Nonestab
112) EYES FOR PACK OPENING ELASTIC STAINLESS[2111603910]()	Specification : A4/1670-000328 DRAWING NO.IND/GS/1768.	R	Nonestab
113) FEMALE CONNECTOR[2010071031]()	Specification : DRG.NO.ADRDE/PAS/2008/24	R	Nonestab
114) FEMALE COUPLING FOR CWL[2110075039]()	Specification : DRG. NO. ADRDE/1344(b)	R	Nonestab
115) FOUR POINT QUICK RELEASE BOX (Ref No 15A/529 AND ADRDE[2110014015]()	Specification : Ref No 15A/529 AND ADRDE SKETCH NO. ADDE/63	R	Nonestab
116) GROMMET WITH WASHER 18 MM DIA (I/CODE 65005)[2110065005]()	Specification : ADRDE/2004/03	R	Nonestab
117) GROMMET 18 MM WITH WASHER (I.CODE-8040)[2110168040]()	Specification : ADRDE/PAS/2005/11	R	Nonestab
118) GROMMET 20 MM WITH SPECIAL WASHER[2110068009]()	Specification : SPECN/DRG. NO. ADRDE/142(c)	R	Nonestab
119) GROMMET BRASS WITH STEEL WASHER 14 MM[2110005000]()	Specification : DRAWING NO.: ADRDE/291	R	Nonestab
120) GROMMET WITH WASHER (I.CODE-9010)[2110029010]()	Specification : DRD/375/97 ADRDE/1432.	R	Nonestab
121) GROMMET WITH WASHER 8 MM[2110062008]()	Specification : DRAWING NO.ADRDE/80(f)	R	Nonestab
122) GROMMET WITH WASHER (13.5 MM)[2110025025]()	Specification : DRAWING NO. ADRDE/1402-03-003	R	Nonestab
123) GROMMET WITH WASHER 11mm[2110060007]()	Specification : SPECIFICATION :DRAWING NO ADRDE/306(a)	R	Nonestab
124) GROMMET WITH WASHER 18 MM DIA[2110065015]()	Specification : ADRDE/2004/03 (a)	R	Nonestab
125) GUIDE RING FOR HARNESS MIRAGE-2000 & SEA HARRIER A/C[2110075032]()	Specification : SPECN-ADRDE/1448	R	Nonestab
126) HARLEY BUCKLE[2110065014]()	Specification : SPECN.NO:-ADRDE/1308(b)	R	Nonestab
127) HELICAL SPRING[2110065007]()	Specification : DRG. NO. ADRDE/1164 - A8 (AS PER SHEET NO.106)	R	Nonestab
128) HOOK FOR ELASTIC PACK OPENING[2111605910]()	Specification : SPECN. NO. ADRDE/87(f)	R	Nonestab
129) HOOK FOR OBM SS AISI GD 316[9911035527]()	Specification : HOOK FOR O.B.M. STAIN.STEEL AISI GD.316 FOR BOAT INFLATABLE	R	Nonestab
130) HOOK SNAP HARNESS D-18[2110040023]()	Specification : DRG.NO.ADRDE/7(F).	R	Nonestab
131) HOUSING WITH FERRULE & RUBBER SLEEVE[2110075035]()	Specification : Housing with Ferrule & Rubber Sleeve Spcns. ADRDE/1151(f) Sheet no. (05-08) and Sheet no.11	C	Nonestab
132) HOUSING WITH FERRULE & RUBBER SLEEVE FOR PP MIRAG 2000/SEA HARRIER A/C[2110077018]()	Specification : SPECN-ADRDE/1357(a)	R	Nonestab
133) INERTIA PROOF QUICK RELEASE FITTING 4 POINT WITH CONNECTING LUG LARGE AND SMALL[9911036174]()	Specification : INERTIA PROOF QUICK RELEASE FITTING 4 POINT QUANTITY = 01. DRAWING NO. ADRDE/209(b) CONNECTING LUG LARGE QUANTITY = 02. DRAWING NO. ADRDE/1305(a) CONNECTING LUG SMALL	R	Nonestab
134) INVERTED "V"[2110071024]()	Specification : DRG.NO.: ADRDE/1359(a) DRD/25/98.	R	Nonestab
135) LEG LOOP SHACKLE[2110019012]()	Specification : DRG.NO.ADRDE/1381.	R	Nonestab
136) LOCK OCK WITH BUCKLE[2110069032]()	Specification : ADRDE/1354.	R	Nonestab
137) LUG METAL(AIR CREW PARACHUTE CHEST TYPE MK-1)[2110040024]()	Specification : SPECN. NO. ADRDE/122(c).	R	Nonestab
138) METAL PULLEY MKII[2110060022]()	Specification : ADRDE/1449 except that : new material i.e X2CrNi19-11 as per specification BS EN10216-5:2004	R	Nonestab
139) METAL PULLY ( COMPONENT )[2110060019]()	Specification : SPECN.NO.ADRDE/1449.	R	Nonestab
140) METALIC PLATE STEFFINING[2110071026]()	Specification : DRG.NO.:ADRDE/1368(a) DRD/16/98	R	Nonestab
141) METALLIC RING[2110029015]()	Specification : DO/129/93, ADRDE/1293.	R	Nonestab
142) METALLIC SLIDE FASTENER HEAVY DUTY 457 MM LONG OG[2111659013]()	Specification : SPECN. NO.: IS : 3148	R	Nonestab
143) MOORING PIN[2103703003]()	Specification : SPECN-IMPD-0411	R	Nonestab
144) MOULDED PLATE TYPE-I[2110071012]()	Specification : DRG. NO.:ADRDE/1309(a) DRD/42/98	R	Nonestab
145) MOULDED PLATE TYPE-II WITH CURVED PLATE (METALLIC ARC SUPPORT) STIFFENER PLATE (METALLIC ARC SUPPORT) RIVETS[2010071030]()	Specification : DRG.NO. 1-ADRDE/1310(b) MOULDED PLATE TYPE-II.QTY.01 NOS. 2-ADRDE/1311(b) CURVED PLATE (METALLIC ARC SUPPORT) QTY-01 NOS. 3-ADRDE/1311-02(b)	R	Nonestab
146) NIV GROMMET 8MM WITH WASHER STAINLESS STEEL[2110008013]()	Specification : DRAWING NO. CQA(GS)/US/561	C	Nonestab
147) NIV PACK FRAME[2110008014]()	Specification : FOR - DRAWING NO.CQA(GS)/US/557 READ- DRAWING NO.CQA(GS)/US/557 except that :- Drg sheet No. 2 of 3 Dtd :24.04.2019	C	Nonestab
148) NIV PACK OPENING SPRING ELASTIC EYE[2110008012]()	Specification : DRAWING NO. CQA(GS)/US/558	R	Nonestab
149) NIV STIFFENER FOR RIP CORD PROTECTION FLAP (PTA-R)[2110008010]()	Specification : DRAWING NO. CQA(GS)/US/556(a)	R	Nonestab
150) NIV TRIANGULAR D RING[2010020005]()	Specification : DRAWING NO. CQA(GS)/US/560	C	Nonestab
151) NIV WASHER FOR LOOP PACK CLOSING[2110008011]()	Specification : DRAWING NO. CQA(GS)/US/559	C	Nonestab
152) OBM BRACKET ASSEMBLY[9911037584]()	Specification : IMPD-0409/B and As per Clause No. 5.6 and 5.7 of Specn no. CQAE/1940/ 1520(B):2006	R	Nonestab
153) PACK OPENING SPRING ELASTIC 440 MM[2110061008]()	Specification : SPECIFICATION NO:- IND/GS/1827(a) EXCEPT LENGTH.	C	Nonestab
154) PACK OPENING SPRING ELASTIC LONG 203 MM[2110065003]()	Specification : ADRDE/781(d)EXCEPT FOR LENGTH	R	Nonestab
155) PACK OPENING SPRING ELASTIC LONG 89 MM[2110065004]()	Specification : ADRDE/781(d)EXCEPT FOR LENGTH	R	Nonestab
156) PACK OPENING SPRING ELASTIC SHORT 370 MM[2110061007]()	Specification : SPECIFICATION NO.IND/GS/1827(a) EXCEPT LENNGTH.	C	Nonestab
157) PACK STEEL FOR AIR CREW CHEST TYPE PARA[2110040025]()	Specification : DRAWING NO.: ADRDE/123(d)	R	Nonestab
158) PACKING PIN DRG. NO. ADRDE/ 1402-05[2110025027]()	Specification : DRG. NO. ADRDE/ 1402-05	R	Nonestab
159) PACKING PIN WIRE ROPE 5 MM DIA EN-8[2110019007]()	Specification : SPECN NO.:.ADRDE Drg.No. ADRDE/1235 A-8(b)	R	Nonestab
160) PATCH ROUND WITH D RING Cat/Part No. 14/5420-000068[2010990469]()	Specification : SPECIFICATION NO: IND/ENG/PROV/1180/C & DRAWING NO: IMPD - 0942/B and IMPD - 0943/B	R	Nonestab
161) PIN ASSEMBLY[2010071032]()	Specification : DRG.NO.ADRDE/PAS/2008/23	R	Nonestab
162) PIN DRD/341/96[2110029008]()	Specification : ADRDE/1288.	R	Nonestab
163) PIN FOR BALL TYPE AUXILARY[2110068034]()	Specification : ADRDE/1316	R	Nonestab
164) PIN FOR LINK 25 M[2110029017]()	Specification : ADRDE/1433.	R	Nonestab
165) PIN FOR LOCKING LINK[2010068054]()	Specification : DRG.NO.-ADRDE/1180.	R	Nonestab
166) PIN WITH PULLY[2110071016]()	Specification : DRG. NO.:ADRDE/1300-G(b) DRD/33/98	R	Nonestab
167) PLAIN PLATE WITH HOLE SS AISI GD316[9911035526]()	Specification : PLAIN PLATE WITH STAIN.STEEL AISI GD.316 FOR BOAT INFLATABLE	R	Nonestab
168) PLATE CURVED WITH HOLE[2110018006]()	Specification : SPCN/DRG:ADRDE/1107(d) sheet no. 8	R	Nonestab
169) PRU-SLEEVE[2111659014]()	Specification : SPECN-ADRDE/1245	R	Nonestab
170) PULLEY BPLCA 1 3 01[2110019023]()	Specification : DRG. NO. 1.3.01-01(a)	R	Nonestab
171) PULLEY FOR B.P SU-30[2110025022]()	Specification : DRG.NO.ADRDE/1402-01--002	R	Nonestab
172) PULLEY FOR ROTATING CANOPY[2110068044]()	Specification : SPECN:- ADRDE/1319(a)	R	Nonestab
173) PULLEY[2101069001]()	Specification : SPECN. NO. ADRDE/1159-A-2/SA-6(a)	R	Nonestab
174) PULLY FOR LINK 25 M LONG[2110029016]()	Specification : ADRDR/1292.	R	Nonestab
175) PULLY MIG-29[2110019021]()	Specification : ADRDE/1235-SA1(d)	R	Nonestab
176) PULLY MIG-29 (I.CODE 9001)[2110019001]()	Specification : DRG.NO.ADRDE/1235-SA-1(c).	R	Nonestab
177) PULLEY RTU I C 2110026012[2110026012]()	Specification : DRG.NO. ADRDE/ 1041-A-2/SA-1(d)	R	Nonestab
178) PULLY SMALL[2055100006]()	Specification : Prov. Drg. NO. ADRDE/172(b).	R	Nonestab
179) QUICK RELEASE ADJ. BUCKLE[2110062009]()	Specification : Drawing No. : ADRDE/205(d)	R	Nonestab
180) QUICK RELEASE CONNECTING LUG MALE[2110018012]()	Specification : SPECN. NO:-ADRDE/1107(d). SHEET NO.7	R	Nonestab
181) QUICK RELEASE LOCK TP WITH BUCKLE[2110019011]()	Specification : DRG.NO.-ADRDE/PAS/2007/16.	R	Nonestab
182) QUICK RELEASE UNIT[2110071022]()	Specification : SPECN.NO.: ADRDE/1369(a) DRD/26/98.	R	Nonestab
183) RING for PP PSU (I.CODE-9018)[2110019018]()	Specification : DRG.NO.-ADRDE/1458	R	Nonestab
184) RING (I.CODE-1283)[2101221283]()	Specification : SPECN-DRD/393/97,ADRDE/1290.	R	Nonestab
185) RING 14 MM[2110038004]()	Specification : SPECN.NO-ADRDE/1324(a).	R	Nonestab
186) RING DRD/395/97[2110029011]()	Specification : DRG.-DRD/395/97 ADRDE/1291.	R	Nonestab
187) RING FOR AUXIALARY LINK FOR PSM SERIES[2010068058]()	Specification : DRG.NO:-ADRDE/1393.	R	Nonestab
188) RING FOR BREAK LINK FOR PSM SERIES[2010068057]()	Specification : DRG.NO:-ADRDE/1392	R	Nonestab
189) RING FOR STRAND COVER (PSM SERIES)[2010068062]()	Specification : DRG.NO:-ADRDE/1353.	R	Nonestab
190) RIP CORD ASSEMBLY PP BMK[2110071029]()	Specification : ADRDE/1323-G(c)	R	Nonestab
191) RIP CORD ASSEMBLY[2110075038]()	Specification : Drg. No. ADRDE/1453(b)	R	Nonestab
192) RIP CORD ASSEMBLY (FOR PILOT PARA JAGUAR A/C)[2110075018]()	Specification : SPCN.NO.AS PER ADRDE/1453(a)	R	Nonestab
193) RIP CORD ASSEMBLY FOR PACK CHEST[2110048000]()	Specification : DRAWING NO.: ADRDE/169(d).	R	Nonestab
194) RIP CORD HANDLE[2110068038]()	Specification : ADRDE/1325-G/DRD/65/98	R	Nonestab
195) RIP CORD HANDLE PTAR WITH DOUBLE STOPPER BALL (I CODE-8009)[2110008009]()	Specification : SPECN-ADRDE/PAS/2004/01(a)	R	Nonestab
196) NIV RIP CORD HANDLE PTA R WITH DOUBLE STOPPER BALL[2110008017]()	Specification : CQA(GS)/US/564	R	Nonestab
197) RIP CORD LARGE[2110027005]()	Specification : PROV DRAWING NO.ADRDE/115(f).	R	Nonestab
198) RIP CORD LARGE ADRDE 282 d[2110005015]()	Specification : ADRDE/282(d)	C	Nonestab
199) RIP CORD SMALL[2110005004]()	Specification : DRAWING NO. ADRDE/282(b)	R	Nonestab
200) RIP CORD WITH LOOP[2110005014]()	Specification : ADRDE/292(d)	R	Nonestab
201) RIP CORD WITH PIN[2110019006]()	Specification : SPECN.NO.ADRDE/1235-A9(b).	R	Nonestab
202) ROLLER FITTING[2110075019]()	Specification : SPCN.NO.AS PER ADRDE/1446	R	Nonestab
203) ROW LOCK ASSEMBLY[2103703007]()	Specification : SPECN-IMSA-0329.(IMPD-2044,IMPD-2045,IMPD-2046)	R	Nonestab
204) SHACKLE D SHAPED SMALL[2110060015]()	Specification : SPECIFICATION/DRAWING:ADRDE/304((b).	R	Nonestab
205) SHACKLE D SHAPED LARGE[2110060002]()	Specification : SPECIFICATION: DRAWING NO ADRDE/303(c)	R	Nonestab
206) SHACKLE WITH NUT AND BOLT BLACK[2110077022]()	Specification : DRG. NO. ADRDE/ 1348-G (b)	R	Nonestab
207) SHACKLE WITH NUT AND BOLT GREY 62248[2110077021]()	Specification : DRG. NO. ADRDE/ PAS/2008/25	C	Nonestab
208) SHACKLE WITH PULLEY BP MIRAGE[2110060023]()	Specification : ADRDE/302(d)	R	Nonestab
209) SHACKLE WITH PULLY[2110060001]()	Specification : SPECN/DRG.NO: ADRDE/302(c).	R	Nonestab
210) SHOULDER ADJUSTABLE BUCKLE (A.C.P.B./C.T.)[2110080015]()	Specification : SPECN NO. ADRDE\194(a).	R	Nonestab
211) SHOULDER BUCKLE UPPER[2110071006]()	Specification : DRG. NO.:ADRDE/1302 (a) DRD/44/98.	R	Nonestab
212) SNAP FASTENER (FOUR PIECES)[2110068023]()	Specification : SPECN NO.IS:4741-1968 ( WITH BEST TRADE QUALITY)	R	Nonestab
213) SNAP HOOK AND SPRING CLIP FOR ACCT[2110008507]()	Specification : ADRDE/196(d) & ADRDE/197(d).	R	Nonestab
214) SOCKET FOR HARNESS FOR PSM SERIES[2010068067]()	Specification : DRG.NO.ADRDE/1387 (a)	R	Nonestab
215) SPEADER BAR PRIMARY (ASSY)[2110070001]()	Specification : SPECN-ARM-1350-B4	R	Nonestab
216) SPREADER BAR SECONDARY[0619058514]()	Specification : DWG.NO. ARM 1350 B 11	R	Nonestab
217) SPREADLE BAR BUCKLE[2110075002]()	Specification : DRG. NO.ADRDE/1341(c)	R	Nonestab
218) SPRING EJECTOR[2110075024]()	Specification : SPCN.NO.ADRDE/1197-A3/(SA-2)(a)	R	Nonestab
219) STEEL RING[2110032000]()	Specification : SPECN. NO. IND/GS/1871.	R	Nonestab
220) STEEL SCREW SIZE NO 10[9911034666]()	Specification : STEL SCREW SIZE NO.10 50 MM LONG	R	Nonestab
221) STEEL SCREW SIZE NO 8[9911034665]()	Specification : Steel Screw Size NO.8X20 MM LONG	R	Nonestab
222) STICKER STREP LUG[2110075000]()	Specification : DRG. NO. ADRDE/1338(a)	R	Nonestab
223) STIFFENNER FOR RIP CORD PIN PROTECTION FLAP[2110030007]()	Specification : SPECN:-ADRDE/86(c)	R	Nonestab
224) STRAND SAFETY PIN FOR PSM SERIES[2010068060]()	Specification : DRG.NO:-ADRDE/1384.	R	Nonestab
225) STIFFNER PLATE[2110036054]()	Specification : SPECN-ADRDE/1423	R	Nonestab
226) Sub-Assy of Spring for Auxiliary Spring PTA-R Parachute[2110080016]()	Specification : CQA(GS)/US/563	R	Nonestab
227) SUPPORT PLATE[2103712207]()	Specification : SUPPORT PLATE AS PER DRG. NO. OPF/DO/ME-265	R	Nonestab
228) SWIVEL CONE WITH PLATE[2110071013]()	Specification : DRG.NO.:ADRDE/1321(b) DRD/60/98.	R	Nonestab
229) TACK, IRON 20 MM LONG[9911036265]()	Specification : IS 723	R	Nonestab
230) THIMBLE[2110057005]()	Specification : SPECIFICATION: ADRDE/1394(a)	R	Nonestab
231) THIMBLE FOR 120 MM BOMB PARACHUTE[2110033001]()	Specification : SPECN./DRG.NO. CQA(GS)/US/381	R	Nonestab
232) THIMBLE FOR PARACHUTE SYSTEM FOR MORTAR BOMB 81mm ILLUMINATING MK-II VERSION[2110052003]()	Specification : DRG. NO. ADRDE/1113(a)	R	Nonestab
233) TOWING RING 20MM ID[2110025023]()	Specification : DRG.NO.ADRDE/1402-02-002.	R	Estab
234) TOWING RING LARGE[2110019004]()	Specification : DRG NO ADRDE/1235-A2(b).	R	Nonestab
235) TOWING RING LARGE BPLCA[2010068064]()	Specification : Drg. No. 1.3.01-06-01-(b)	R	Nonestab
236) TOWING RING SMALL[2110019005]()	Specification : SPECN NO-ADRDE/1235-A2(b).	R	Nonestab
237) TRINGULAR D RING[2110072001]()	Specification : SPECN-ARM 1350 B 3	R	Nonestab
238) U SHACKLE for PP PSU[2110019015]()	Specification : DRG. NO-ADRDE/1380.	R	Nonestab
239) WAIST LOOP SHACKLE[2110068042]()	Specification : ADRDE/1313	R	Nonestab
240) WHITE LINE PIN ASSY.[2110075006]()	Specification : DRG.NO.ADRDE/1356.	R	Nonestab

Category : DDP,DP
Grade : II
Size :

1) Ordnance Parachute Factory

[ENR Registration]

Name	Specification	Use	Status
1) LEG LOOP SHACKLE Description : LEG LOOP SHACKLE()	Specification : DRG.NO.ADRDE/1381.	R	Estab

Category : p
Grade : 2
Size : S

1798

SHREE KISHAN GOPI KISHAN
15 NOORMAL LOHIA LANE. KOLKATA 700007. FIRST FLOOR. 15 NOORMAL LOHIA LANE. KOLKATA 700007. FIRST FLOOR. KOLKATA West Bengal
PIN1 : 700007
Phone No. : 9883101774
GSTIN : 19AEWPM2467B1Z5

AEWPM2361N

Download

1) Ordnance Factory Bolangir

Name	Specification	Use	Status
1) FELT ON TOP[62]()	Specification : FELT (ON TOP) PRESSED WOOL FELTS(PROOFED) SIZE=2802005 TO 6.3(MM) SOFT QUALITY TO IS-1719:2000 REVISION-4 (REAFFIRMED-2019)	C	Nonestab
2) FELT END SUPPORT[62]()	Specification : FELT (END SUPPORT) PRESSED WOOL FELTS(PROOFED) SIZE=2002002.5 (MM) SOFT QUALITY TO IS-1719:2000 REVISION-4 (REAFFIRMED-2019)	C	Nonestab

Category :
Grade : Grade III
Size : S

1799

VISHWAKARMA FURTNITURE MART
PLOT NO 23 MAIN ROAD BHADARAWATI BHADARAWATI,CHANDRAPUR Maharashtra
PIN1 : 442902
Phone No. : 9822702526
GSTIN : 27ACVPN7143G1Z3

ACVNP7413G

Download

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 2255529016 TIMBER N-C SIZE 51MM X 51MM X 1.50M[22]()	Specification : SPECN. NO. IND/ME/883 (F) (PROV)	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 2255050116 TIMBER N C SIZE 110MM X 16MM[22]()	Specification : IND/ME/883(F) (PROV)	R	Nonestab
2) 2255400600 TIMBER N C SIZE 210MM X 25MM[22]()	Specification : IND/ME/883(F) (PROV)	R	Nonestab
3) 2255408514 TIMBER N C SIZE 240MM X 22MM[22]()	Specification : IND/ME/883(F) (PROV)	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 2255526024 TIMBER N C SIZE 75 75 MM[22]()	Specification : TIMBER NON-CONIFEROUS, SIZE 75 MM X 75 MM X 1.80M TO 1.83MAS PER SPECN. NO. IND/ME/883(F)(PROV) DC NO.3754-MEDT. 12-12-2002.	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 2255058168 TIMBER MANGO[22]()	Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 2255406790 TIMBER NC SIZE 195MM X 30MM X 2 M[22]()	Specification : IND/ME/883(F) (PROV)	R	Nonestab
2) 2255540403 TIMBER N C SIZE 60 X 130MM[22]()	Specification : IND/ME/883 (F) (PROV)	R	Nonestab
3) 2255400208 TIMBER N C SIZE 195MM X 12MM X[22]()	Specification : IND/ME/883(F)(PROV)	R	Nonestab
4) 2255408332 TIMBER NC SIZE 280 X 16 MM[22]()	Specification : IND/ME/883(F)(PROV)	R	Nonestab
5) 2255406390 TIMBER N C SIZE[22]()	Specification : IND/ME/883(F)(PROV)	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()	Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6333501001 TIMBER PLANK SIZE 155 MM 19 MM 1 Point 25 MTRS AND TIMBER[63]()	Specification : TIMBER PLANK SIZE:- 155 MM X 19 MM X 1.25 MTRS AND TIMBER :- DEODAR/SAL/CHIR TO SPEC.IND/ME/883(F) PROV	C	Nonestab
2) 6333501002 TIMBER PLANK SIZE 180 MM 26 MM 1 Point 55 MTR AND TIMBER[63]()	Specification : TIMBER PLANK SIZE:- 180 MM X 26 MM X 1.55 MTR. AND TIMBER:DEODAR/SAL/CHIR TO SPEC IND/ME/833(F) PROV.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()	Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008	C	Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]()	Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6295254902 UNIT LOAD (M.O.P. 12) FOR 155MM (BT)[62]()	Specification : UNIT LOAD (M.O.P. 12) FOR SHELL 155 MM B/T ON PALLET. DESIGNER'S REFERENCE 155-1000(M) DC NO.37126-A DT.25/7/2007	C	Nonestab
2) 6295254901 UNIT LOAD (MOP) FOR SHELL 155 MM BB[62]()	Specification : UNIT LOAD ( M.O.P. 12) FOR SHELL 155MM (B/B) ON PALLET DESIGNER'S REFERENCE 155-2000 (M) DC-37126-A DT.25.07.2007	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 2270528353 PLYWOOD TYPE GRADE MR AB TO SPECN IS 303 1989 RA 2018 SIZE2400MM 1200MM 08MM THICK 5 PLY[22]()	Specification : PLYWOOD TYPE GRADE MR/AB TO SPECN: IS:303-1989(RA 2018)SIZE2400MM X 1200MM X 8MM THICK (5 PLY)	C	Nonestab
2) 2270403355 PLYWOOD 6 MM THICK SIZE 2400 MM 1200 MM GRADE BWR APPEARANCE CLASS[22]()	Specification : PLYWOOD 6 MM THICK, SIZE 2400 MM X 1200 MM, GRADE- BWR, APPEARANCE CLASS-AB STANDARD IS:303-1989 (RA-2018)NUMBER OF PLY : 5 PLY	C	Nonestab
3) 2270441355 PLYWOOD 3 MM THICK SIZE 2400 MM 1200 MM GRADE MR APPEARANCE[22]()	Specification : PLYWOOD 3 MM THICK, SIZE 2400 MM X 1200 MM, GRADE – MR, APPEARANCE CLASS-BB, STANDARD IS:303-1989 (RA 2018)NUMBER OF PLY : 3 PLY	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 2255058168 TIMBER MANGO[22]()	Specification : TIMBER MANGO SIZE - 85 MM X 23 MM X 1.25 M TO 1.28 M SPECN.NO. IND/ME/883 (F) (PROV) DC - 3754 - ME DT.12/12/2002.	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) TIMBER NON CONIFEROUS TO SPECN IND ME 883 F 2015 DC 5452 ME DATED 01 06 2016 and SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE 250 MM 26 MM 155 MTR 2255402703[22]()	Specification : TIMBER NON-CONIFEROUS TO SPECN IND / ME /883(F)-2015 DC 5452 (ME) DATED 01/06/2016 & SPICES OF TIMBER SHOULD BE COVER AS PER CLAUSE NO A 2 AND A3 NOT TO A 21 SIZE- 250 MM X 26 MM X 1.55 MTR	E	Nonestab

Category :
Grade : Grade III
Size : S

1800

Abhaya Precision Industries Pvt Ltd
70/2 Gouri Bari Lane Gouri Bari Lane kolkata West Bengal
PIN1 : 700004
Phone No. : 25540422
GSTIN : 19AACCA1104A1ZM

CALA08495E

Download

1) Gun and Shell Factory

Name	Specification	Use	Status
1) Plug Representing Fuze in F/C TO DRG. NO. M-10394()	Specification : As per drg. no. M-10394	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B[61]()	AS PER DRG. NO F-2277 B	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C[62]()	AS PER: DRG. NO. SK-8345/C	R	Nonestab

Category : p
Grade : Grade II
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) FABRICATION OF BODY FROM RAW MATERIAL DRAWING NO. NAI(J)/501/1. (R/M: 133002022)[91]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SET BACK RING TO DRG. NO. NAI(J) 501/6/4 IN FINISHED CONDITION[60]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) SEMI MACHINE UNION RING TO DRG NO.ISX-492 DC NO.37341-A DT.6/9/2013[62]()	Specification : AS PER DRG.& SPECIFICATION	C	Nonestab

Category : p
Grade : Grade I
Size : S