Specification : CONVERSION OF BOAT TAIL FORGING (IN HEAT TREATED CONDITIO) AS PER REF. DRG. F-448 J (OR LATEST ISSUE) IN TO BOAT TAIL MACHINED TO CQA (A) DRG. NO. 155-1150 COMPLETE WITH ANODIZING & PAINTING. INPUT MATERIAL FOR CONVERSION WILL BE PROVIDED
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) GRENADE BODY BLANKS TO GSF DRG NO M 11220[62]()
Specification : GRENADE BODY BLANKS TO GSF DRG. NO M-11220
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BOLT BREECH FROM FORGING TO TEND DRG.NO 2369 required for 0.315" Sporting Rifle[00]()
Specification : AS PER TEND DRG.NO 2369 required for 0.315" Sporting Rifle
C
Nonestab
2) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle
C
Nonestab
3) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BOLT BREECH FROM FORGING TO DRGNO 29P 0013STAR M required for 0POINT0315 Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Nonestab
2) BLOCK GAS FORGING TO DRG NORFI SK 2132 E FOR RIFLE 7POINT62 MM 1A1 WITH FIRMS MATERIAL ICR1322[70]()
Specification : AS PER DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)
C
Nonestab
3) HAMMER FORGINGS TO DRG M6 0001E FOR RIFLE 7POINT62 MM 1A1 WITH FIRMS MATERIAL ICR 1256 FULLY FINISHED CONDITION 5000 NOS 2500 SETS[70]()
Specification : AS PER DRG. M6-0001E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL) (ICR 1256) (FULLY FINISHED CONDITION) (5000 NOS = 2500 SETS)
C
Nonestab
4) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO D S CAT NO 1005 001514 ICR 1325 I DC NO 26759 SA DT 29 05 2015 SHEETI II DC NO 26766 SA DT 02 07 2015 SHEET II FROM FORGING TO DRG NO RF SK 725 IL[00]()
Specification : AS PERD.S.CAT. NO. 1005-001514(ICR-1325)(I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I,(II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II,FROM FORGING TO DRG. NO. RFI/SK/725/IL
C
Nonestab
5) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()
Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) HALF COUPLING FORGING[71]()
Specification : HALF COUPLING FORGING FOR HALF COULPLING TO DRG NO 2A46.21-20-3 SPECN. 655 M 13 TO BS-970 PT-I-83.
R
Nonestab
Category : p
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]()
Specification : St. Forging Plate Bottom to DRG No. SKM-283*2
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]()
Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2
C
Estab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING HAMMER FOR JVPC[01]()
Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Al FORGING FOR BODY COVER for MAG[61]()
Specification : AL.FORGING FOR BODY COVER DRG.NO. SKM-174*
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]()
Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM
C
Estab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]()
Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.
3) Forging of Breech Block slide DS CAT no. 281*2[04]()
Specification : AS PER DRG.
C
Nonestab
4) St. Forging Buffer Body DRG. No SKM 304*1[01]()
Specification : DRG. No SKM 304*1
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Steel Forging Piston Extension for JVPC[01]()
Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725
C
Nonestab
2) Steel Forging Block Gas for JVPC[01]()
Specification : Steel Forging Block Gas for JVPC, Drg. No. SK-JVPC-6003
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]()
Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG.
C
Estab
2) St Forging Plate Bottom for MAG[01]()
Specification : DRG No. SKM-283*2
C
Estab
3) ST FORGING BUFFER BODY FOR MAG[01]()
Specification : DRG. NO. SKM-304*1
C
Estab
4) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]()
Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82.
C
Estab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) FORGING RECEIVER GUIDE FRONT RIGHT
Description : FORGING RECEIVER GUIDE FRONT RIGHT()
Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*3
C
Estab
Category : ddp
Grade : 3
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) PIN LOCKING TRIGGER MECH-9MM[70]()
Specification : PIN LOCKING TRIGGER MECH.D S CAT NO 1005-000904 9MM CARBINE FINISHED CONDITION (ICR NO 1080) DC NO. 26896-SA DT. 18/07/2016
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Forging of Guide Front Right DRG. no. SKM-305*2[04]()
Specification : Forging Guide Front Right SKM-305*2
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TA LINK HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPEFICIFICATION
C
Nonestab
2) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Nonestab
3) RING NUT 450 KG (6230900904)[60]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9.
DRG. ENCLOSED.
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788.
C
Nonestab
5) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
6) Washer for 1000lbs (6220901111)[62]()
Specification : WASHER TO DRG. NO. ARM 1172 A 17 MATERIAL NEOPRENE RUBBER TO
IND/ME/884 [PROV] C3. [DRG. ENCLOSED FOR DIMENSIONS ONLY
C
Nonestab
7) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
8) TA LINK FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
9) SET OF TA SHOE AND TA GUIDE FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
10) TA CLAMP FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
11) TA LINK MACHINED FOLLOWED BY FORGING[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
12) SET OF TA SHOE AND TA GUIDE MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
13) TA CLAMP MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
14) TA WASHER T-90 (6120100106)[61]()
Specification : TA WASHER TO DRG.NO.OFM-32839.
C
Nonestab
15) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
C
Nonestab
16) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Nonestab
17) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Nonestab
18) RING NUT 250 KG (6240900904)[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/
9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
19) TA CLAMP HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
20) SET OF TA SHOE TA GUIDE HEAT TREATED FOLLOWED BY FORGING AND MACHINING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade I
Size :
M
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Forging of Guide Front Right DRG. no. SKM-305*2
Description : Forging of Guide Front Right DRG. no. SKM-305*2()
Specification : Forging Guide Front Right SKM-305*2
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Conversion of steel bars into extractor lower as per drg no 2A260281[63]()
Specification : As per drg no 2A26-02-81
C
Nonestab
2) Conversion of steel bars into extractor upper to drg no 2A260280[63]()
Specification : Conversion of steel bars into extractor upper to drg no 2A26-02-80
Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290
C
Nonestab
5) LAMP WANDERING 1A AS PER DRG NO MCT 3212[74]()
Specification : LAMP WANDERING 1A AS PER DRG.NO.MCT-3212
C
Nonestab
6) ETCHING ENGRAVING OF ARM RANGE TO DRG NO IRDE 285 6 MCT 2612[00]()
Specification : ETCHING/ENGRAVING OF ARM RANGE TO DRG.NO IRDE-285/6,MCT-2612. FOR PLOTTER 81MM MORTAR CASED 101A . NOTE-BLANK WILL BE SUPPLIED BY OFD.(EACH ARM RANGE SHOULD BE PACKED INDIVIDUALLY TO PROTECT SURFACE DAMAGES & SCRATCHES)
C
Nonestab
7) HOUSING OG DRG NO IRDE 1625 1[74]()
Specification : HOUSING OG DRG NO.IRDE-1625/1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) FRAME TO DRG NO MCT 1465 3[74]()
Specification : FRAME TO DRG NO. MCT-1465/3
C
Nonestab
2) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 AND CII 253 2[74]()
Specification : ARC, BEARING NO.3 MK 1(M-I) AS PER DRG.NO.: CII-253 COMPRISING WITH CII-253/1 & CII-253/2
C
Nonestab
3) ARM RANGE NO 3 MK 1 M 1 AS PER DRG NO CII 267 2 SHEETS CII 247 SHEET 3[74]()
Specification : ARM, RANGE NO.3 MK 1(M-1) AS PER DRG.NO.: CII-267(2 SHEETS) & CII-247 SHEET-3
C
Nonestab
4) ROMER NO 3 MK 1 L AS PER DRG NO C I A O S 562[74]()
Specification : ROMER NO.3 MK 1/L AS PER DRG.NO.: C.I.A.(O.S.)562
C
Nonestab
5) CAP COMPASS CORRECTION AS PER DRG NO MCT 3222[74]()
Specification : CAP COMPASS CORRECTION AS PER DRG. NO.MCT-3222
C
Nonestab
6) ARM RANGE NO 5 MK 1 M I AS PER DRG NO CII 247 3 SHEETS[74]()
Specification : ARM, RANGE NO.5 MK 1(M-I) AS PER DRG.NO.: CII-247(3 SHEETS)
C
Nonestab
7) OPTICAL ASSEMBLY MECHANICAL AS PER DRG NO IRDE 2048 A 1[74]()
Specification : OPTICAL ASSEMBLY MECHANICAL AS PER DRG.NO.:IRDE-2048/A-1
C
Nonestab
8) TRIPOD FIRE CONTROL INSTRUMENT NO 17A MK 2 M1 TO DRG NO MCT 2705 COMPLETE[74]()
Specification : TRIPOD FIRE CONTROL INSTRUMENT NO.17A MK 2(M1) TO DRG.NO.MCT-2705 COMPLETE FOR COLLIMETER INFINITY
C
Nonestab
9) OPTICAL COMPONENT ASSY TO DRG MCT 3139 IRDE 2048 SA 9[74]()
11) ROCKER BRACKET ASSEMBLY AS PER DRG NO GF 230107[74]()
Specification : ROCKER BRACKET ASSEMBLY AS PER DRG NO. GF -230107
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) SET OF COMPONENT COVER POD[74]()
Specification : SET OF COMPONENT COVER POD
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG. NO.MCT-2313, 2314 & 2315.[74]()
Specification : As per required Specification
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) Assy of eye piece left, MCT-3286[74]()
Specification : ASSY OF EYE PIECE, LEFT AS PER DRG. NO. MCT 3286
C
Nonestab
2) ASSY OF EYE PIECE, RIGHT, MCT-3285()
ASSY OF EYE PIECE, RIGHT,AS PER DRG, MCT-3285
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) PRISM HOUSING TO DRG NO MCT 1931[00]()
Specification : PRISM HOUSING TO DRG NO. MCT-1931
C
Nonestab
2) TUBE HOUSING DULY MACHINED AS PER DRG NO MCT 1990 1 FOR PNVG[74]()
Specification : TUBE HOUSING DULY MACHINED AS PER DRG. NO. MCT-1990/1 FOR PNVG.
C
Nonestab
3) HOUSING OG FINISHED TO DRG NO MCT 1514 1[74]()
Specification : HOUSING OG FINISHED TO DRG NO.MCT/1514/1
C
Nonestab
4) MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD[74]()
Specification : MACHINING OF HOUSING II TUBE AS PER DRG.NO. CWC/229/19/5 CASTING WILL BE SUPPLIED BY OFD
C
Nonestab
5) HOUSING FOR II TUBE AS PER DRG NO CWC 229 19 5 FOR PNS RIFLE LMG CGRL[74]()
Specification : HOUSING FOR II TUBE AS PER DRG.NO.CWC/229/19/5 FOR PNS 5.56 RIFLE/LMG/CGRL
C
Nonestab
6) MACHINING OF BODY TO DRG NO MCT 2470 1 CASTING WILL BE SUPPLIED BY OFD DUN[00]()
Specification : MACHINING OF BODY TO DRG.NO.MCT-2470/1 CASTING WILL BE SUPPLIED BY OFD.DUN.
C
Nonestab
7) MACHINING OF COVER TO DRG NO MCT 2471 1 CASTING WILL BE SUPPLIED BY ORD FACT DEHARDUN[00]()
Specification : MACHINING OF COVER TO DRG.NO.MCT-2471/1 CASTING WILL BE SUPPLIED BY ORD.FACT. DEHARDUN.
C
Nonestab
8) MACHINING OF BODY RIGHT BINO 8X30 MCT 1252 2 NOTE CASTING LF 0020000691 WILL BE SUPPLIED BY OFD[74]()
Specification : MACHINING OF BODY RIGHT BINO 8X30 MCT-1252/2 NOTE- CASTING (LF:-0020000691) WILL BE SUPPLIED BY OFD
C
Nonestab
9) MACHINING OF BEARING BOTTOM TO DRG NO MCT 2900 1 MCT 2903 MCT 2904 FOR MOUNT TELESCOPE 102A[74]()
Specification : MACHINING OF BEARING BOTTOM TO DRG.NO. MCT-2900/1,MCT-2903,MCT-2904 FOR MOUNT TELESCOPE-102A. NOTE:-CASTING OF BEARING BOTTOM WILL BE PROVIDED BY OFDUN.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) ELEVATION CURVE -557 TO DRG NO CQA(I)-792/7[74]()
Specification : ELEVATION CURVE -557 TO DRG NO
CQA(I)-792/7
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) SUPPORT TO DRG.NO.MCT-3115 FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV[74]()
Specification : SUPPORT TO DRG.NO.MCT-3115
FOR TELESCOPE SIGHT FOR 84MM CARL GUSTAV
Specification : HOUSING ASSLY MCT-2288 COMPRISING OF MCT-2397/1,MCT-2396,MCT-2290
C
Nonestab
12) HOUSING EP FINISHED TO DRG NO MCT 1515 1[74]()
Specification : HOUSING EP FINISHED TO DRG NO.MCT/1515/1
C
Nonestab
13) KNOB TO DRG MCT 1150 2 FOR SIGHT UNIT CASED 102B[74]()
Specification : KNOB TO DRG, MCT-1150/2
FOR SIGHT UNIT CASED 102B
C
Nonestab
14) LEVEL INDICATOR TO DRG NO MCT 3250 FOR CLINOMETER 2A 46[74]()
Specification : LEVEL INDICATOR TO DRG.NO.MCT-3250 FOR
CLINOMETER 2A 46
C
Nonestab
15) LEVER CONTROL HAND TO DRG NO MCT 3244 FOR SIGHT DIAL104A[74]()
Specification : LEVER CONTROL HAND TO DRG.NO.MCT-3244
FOR SIGHT DIAL104A
C
Nonestab
16) LEVER DRG NO CII 125[74]()
Specification : LEVER DRG.NO.CII-125
C
Nonestab
17) MACHINING OF BASE AS PER DRG NO MCT 3471 FOR MOUNT TELE 102A[74]()
Specification : MACHINING OF BASE AS PER DRG.NO. MCT-3471 FOR MOUNT TELE. 102A. NOTE:- CASTING WILL BE SUPPLIED BY OFD
C
Nonestab
18) MACHINING OF BASE PLATE TO DRG NO MCT 2464 1 CASTING[74]()
Specification : MACHINING OF BASE PLATE TO DRG.NO.MCT-2464/1 CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY OF DUN.
C
Nonestab
19) MACHINING OF BEARING MOUNTED MCT 2465 1 CASTING[74]()
Specification : MACHINING OF BEARING MOUNTED MCT-2465/1, CASTING / SPECIFIED RAW MATERIAL WILL BE SUPPLIED BY ORD. FY. D.DUN.
C
Nonestab
20) MACHINING OF BRACKET AS PER DRG NO MCT 3470 FOR MOUNT TELESCOPE 102A[74]()
Specification : MACHINING OF BRACKET AS PER DRG.NO.MCT-3470 FOR MOUNT TELESCOPE 102A, NOTE: CASTING WILL BE SUPPLIED BY OFDUN.
C
Nonestab
21) MACHINING OF CASING UPPER[74]()
Specification : MACHINING OF CASING UPPER AS PER DRG. NO.IRDE 1810/2 / MCT-2390/1 FOR COMMANDER DAY EPISCOPE. NOTE:SHATTER ALLOY CASTING AS PER DRG.NO ODD/C/826/2 WILL BE SUPPLIED BY OFD.
C
Nonestab
22) MACHINING OF CASTING TO DRG NO CWC 240 56 FOR HOUSING[74]()
Specification : MACHINING OF CASTING TO DRG.NO.CWC-240/56 FOR HOUSING
C
Nonestab
23) MACHINING OF FRAME BODY AS PER DRG MCT 2287 2 OF QUADRANT FIRE CONTROL[74]()
Specification : MACHINING OF FRAME(BODY) AS PER DRG MCT 2287/2 OF QUADRANT FIRE CONTROL. NOTE: CASTINGS OF BODY WILL BE SUPPLIED BY OFD.
C
Nonestab
24) MACHINING OF HOLDER UPPER PRISM[74]()
Specification : MACHINING OF HOLDER UPPER PRISM AS PER DRG.NO.IRDE 1808/6,/ MCT-2399 FOR DRIVES DAY SIGHT (CENTRAL) NOTE:CASTINGS AS PER ODD/C/964 WILL BE SUPPLIED BY OFD.
C
Nonestab
25) MACHINING OF HOUSING LOWER[74]()
Specification : MACHINING OF HOUSING LOWER AS PER DRG. NO.IRDE 1809/4/MCT-2389. FOR DRIVERS DAY SIGHT (SIDE) NOTE:CASTING AS PER ODD/C/965 WILL BE SUPPLIED BY OFD.
C
Nonestab
26) NAME PLATE DRG NO MCT 1726 2[74]()
Specification : NAME PLATE DRG NO.MCT-1726/2
C
Nonestab
27) NAME PLATE TO DRG NO MCT 2953 1 PLATE IDENTIFICATION FOR HR BINO 8X30R[74]()
Specification : "NAME PLATE TO DRG.NO.MCT-2953/1 (PLATE IDENTIFICATION) FOR HR BINO 8X30R.
"
Specification : PT.SCREW (KA 22X14 WN 1412) FOR H.R.BINO
C
Nonestab
36) PT SCREW 1452 FOR H R BINO[17]()
Specification : PT.SCREW (K18X10WN 1452) FOR H.R.BINO
C
Nonestab
37) RING WITH DIVISIONS AS PER DRG NO MCT 3268A FOR CLINOMETER 2A 46[74]()
Specification : RING WITH DIVISIONS AS PER DRG.NO. MCT-3268A FOR CLINOMETER 2A(46)
C
Nonestab
38) SET OF DIAL SCALE CONSIST OF 2 COMPONENT 1 DIAL SCALE VERTICAL MCT2514 1 2DIAL SCALE LATERAL MCT 2515 1[74]()
Specification : SET OF DIAL SCALE,CONSIST.OF 2 COMPONENT 1.DIAL SCALE ,VERTICAL. MCT-2514/1 1/SET .2.DIAL SCALE,LATERAL MCT-2515/1 1/SET
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Varangaon
Name
Specification
Use
Status
1) LINK CARTG. METALLIC BELT 7.62MM M13()
Specification : TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 &
TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004
(II) JSS : 0465-01-1994 (REVISION NO. 1)
NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG.
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) RING NUT 1000 LBS (6220900900)[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE
TREATMENT. [DRG. ENCLOSED].
C
Nonestab
2) RING NUT 450 KG (6230900904)[60]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9.
DRG. ENCLOSED.
C
Nonestab
3) HEX SOCKET SET SCREW 450 KG 6230001304[62]()
Specification : HEX SOCKET SET SCREW M5 X 10 (IS-6094-2006-PT-4,CP).
5) HEX SOCKET SET SCREW BT 450 KG 1727041225[17]()
Specification : HEX SOCKET SET SCREW M 12 X 1.75 PITCH X 25- [(IS:- 6094-Pt-4:2006-CP)
C
Nonestab
6) SOCKET SET SCREW FOR BASE TRANSIT 1751020207[17]()
Specification : SOCKET SET SCREW FOR BASE TRANSIT ARM 1172 A - 32. ] [[DRG. ENCLOSED].
C
Nonestab
7) TA WASHER T-90 (6120100106)[61]()
Specification : TA WASHER TO DRG.NO.OFM-32839.
C
Nonestab
8) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Nonestab
9) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Nonestab
10) RING NUT 250 KG (6240900904)[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/
9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
11) HEX SOCKET HD CAP SCREW M6X25 1732040625[17]()
Specification : HEX. SOCKET HEAD CAP SCREW M 6 X 25 TO SPECN. IS 2269:2006 [FOR RING NUT].
C
Nonestab
12) HEX SOCKET SET SCREW M5 450KG 6230901104[62]()
Specification : HEX SOCKET SET SCREW M 5 X 8 -(IS:6094- Pt-4,2006-CP)
C
Nonestab
13) SCEWFOR RING NUT 6220900800[62]()
Specification : SCREW FOR RING NUT TO DRG. No. ARM 1172A30 [DRG. ENCLOSED]
C
Nonestab
14) LOCKING SCREW FOR CONT EXPLODER 6220900710[62]()
Specification : LOCKING SCREW FOR CONTAINER EXPLODER TO DRG.NO.ARM-1172A-18] [DRG. ENCLOSED].
C
Nonestab
15) TA BOLT M20 X 1 POINT 5 6G 6120100257[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
16) TA BOLT M27 X 1 POINT 5 6G[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
17) MACHINING OF LUG 243[61]()
Specification : AS PER DRAWING
C
Nonestab
18) MACHINING OF LUG 318[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
19) LUG HOUSING 250 KG (6240100114)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
Category : ddp
Grade : Grade III
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) TRANSISTOR 2T874A LF NO 7441121064[74]()
Specification : TRANSISTOR 2T874A Drg No.AAO.339.571TU TRANSISTOR 2T874A AS PER SPECN. NO. AAO.339.571TU
C
Nonestab
2) 9001120190 DIODE 2D102A1[90]()
Specification : 9001120190 DIODE 2D102A1/BB
Drg No.SPECNNO:AEYAR.432120.444TY
DIODE 2D102A1/BB AS PER SPECN.
NO.AEYAR 432120.444TY
C
Nonestab
3) 7440101144 SOCKET[74]()
Specification : 7440101144 SOCKET WITH METALLIC PROTECTIVE CAP 2RM18KPE7G1V1 AS PER
SPECN. NO. GEO.364.126 TY, JS
S-50860
FOR CABLE SET IUMK305651.002
C
Nonestab
4) 9001120853 RELAY REK63V[90]()
Specification : 9001120853 RELAY REK63V RVIM.647612029-04
Drg No.RVIM.647612.029TU
RELAY, REK 63V,RVIM.647612.029
-04
AS PER SPEC. NO. RVIM.647612.0
C
Nonestab
5) 7441121539 SWITCH TOGGLE SP ON NONE ON[74]()
Specification : 7441121539
SWITCH TOGGLE SP ON NONE ON (H
ARNESS COMPONENT)
AS PER OEM PART NO. 5636ABX40
8 MAKE- APEM COMPONENTS INC,
C
Nonestab
6) 7441120089 TRANSISTOR 2T312V[74]()
Specification : 7441120089 TRANSISTOR 2T312V
Drg No.ZHK3.365.143 TU
TRANSISTOR 2T312V
AS PER DRG./SPECN. NO.ZHK3.365
.143 TU
C
Nonestab
7) 7441121805 RELAY[74]()
Specification : 7441121805 RELAY REK-87V IDYAU 647611.001
Drg No.IDYAU 647611.001 TY
RELAY REK-87V IDYAU 647611.001
-14 AS PER SPECN. NO.
IDYAU 647611.001
C
Nonestab
8) 9927097575 SWITCH MP 12[99]()
Specification : 9927097575
SWITCH MP-12 AS PER SPECN.NO.
OU3.602.069 TY
C
Nonestab
9) 9001120760 RESISTOR S5[90]()
Specification : 9001120760
RESISTOR S5-5-2WATT-100 OHM, +
/- 1%
AS PER SPECIICATION NO OZHO.46
7.505 TY
C
Nonestab
10) 9927089442 RESISTOR S5[99]()
Specification : 9927089442 RESISTOR S5-5-2W-160 OHM, 1%
WIRE WOUND RESISTOR S5-5-2W-16
0 OHM +/- 1%
AS PER SPECIFICATION NO OZHO 4
67.505 TU
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) HYBRID MICRO CIRCUIT BMC -1271[74]()
Specification : HYBRID MICRO CIRCUIT BMC -1271
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) CASE FOR SIGHT UNIT CASED 102B TO DRAWING NO IRDE 1131 COMPLETE SWO 37546[74]()
Specification : CASE, TO DRG. NO. IRDE-1131 (COMPLETE) SWO. 37546 FOR S.U. CASED-102B
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) knob assembly 502[74]()
Specification : knob (502+441) assembly as per drg. no. MCT-3487
C
Nonestab
2) knob assembly 751[74]()
Specification : knob assembly (751+441) as per MCT 3478
C
Nonestab
3) Needle Valve Carburator MCT 3215[74]()
Specification : Needle Valve Carburator MCT 3215
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) knob assembly 502[74]()
Specification : knob (502+441) assembly as per drg. no. MCT-3487
C
Estab
2) knob assembly 751[74]()
Specification : knob assembly (751+441) as per MCT 3478
C
Estab
3) Needle Valve Carburator MCT 3215[74]()
Specification : Needle Valve Carburator MCT 3215
C
Estab
4) ARC BEARING NO 3 MK 1 M I AS PER DRG NO CII 253 COMPRISING WITH CII 253 1 CII 253 2[74]()
Specification :
R
Estab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) RECEIVER FOR GPMG WITHOUT HEAT TREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Ejector 9 mm for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 007 00DA[70]()
Specification : Ejector 9 mm for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 007 00DA
C
Nonestab
2) Screw Barrel Mount for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 004 00DA[70]()
Specification : Screw Barrel Mount for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 004 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Dehradun
[ENR Registration]
Name
Specification
Use
Status
1) OG. ASSY COMPRISING OF FOLLOWINGS:-(A).RING, LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER, OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.
Description : OG. ASSY COMPRISING OF FOLLOWINGS:-(A).RING, LOCK KEYED IRDE-1274/35, (B).CUP IRDE-1274/36, (C).SPACER, OPTICAL ELEMENT IRDE-1274/38, (D).RAY SHADE IRDE-1274/41.()
Specification : AS PER SPECIFICATION
C
Estab
2) EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS
Description : EYE PIECE WITHOUT EYE PIECE II CONSISTING OF 2 COMPONENTS()
Specification : "EYE PIECE WITHOUT EYE PIECE -II CONSISTING OF 2 COMPONENTS:- 1.EYE PIECE SPACER RING DRG. MCT-2509,1/SET, 2. EYEPIECE SCREW RING TO DRG., MCT-2504,1/SET . FOER TELE,SIGHTING-MK-III.
C
Estab
3) MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD
Description : MACHINING OF HOUSING II TUBE AS PER DRG NO CWC 229 19 5 CASTING WILL BE SUPPLIED BY OFD()
Specification : MACHINING OF HOUSING II TUBE AS PER DRG.NO. CWC/229/19/5 CASTING WILL BE SUPPLIED BY OFD
C
Estab
Category : p
Grade : 2
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Plate Armature in finished condition[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I)-393/36 to DS CAT No. 6115-001170
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Latch Special in finished condition[70]()
Specification : Latch Special in finished condition to CAT No. 5325-000862 Drg. No. CQA(I) 393/24
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Plate Armature in finished condition[70]()
Specification : Plate Armature in finished condition Drg. No. CQA(I) 393/9 to DS CAT No./Pt. No 6115-001167
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Magnet Permanent for Firing Device[70]()
Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) MACHINING OF BODY WITH FITTING LF NO 7434011003[74]()
Specification : MACHINING OF BODY WITH FITTING LF NO 7434011003
1) BODY BARREL LOCKING CATCH DS CAT 1005-006830[70]()
Specification : AS PER DRG DS CAT 1005-006830
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Body Barrel Locking Catch[70]()
Specification : BODY BARREL LOCKING CATCH,DS CAT NO 1005-006830 DC(I) NO 254 00-SA DT 18-06-02 (WITH SAF MATERIAL IN LF NO 0145032065 ST FLAT 10X25 MM SPEC BS:970-PT-1:1983 GR. 070 M55 AGAINST BANK GUARANTEE)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) LINK ROLLER for MAG 7 62MM[70]()
Specification : LINK ROLLER TO DS CAT NO.1005-000467 DC(I)25298 SA DT. 19.3.02 IN FINISHED CONDITION. (STRD.10MMDIA GD-534A99WILL BE SUPPLIED BY SAF ON B/G LF0352002010)
AS PER DRG.
C
Nonestab
2) PLUNGER CATCH FOR MAG[70]()
Specification : PLUNGER, CATCH TO DS CAT NO. 1005-000443 DC(I) NO. 25298-SA DT- 19.3.2002 IN FINISHED CONDITION.
C
Nonestab
3) LEVER CLAMPING REAR LEG ASSY for MAG[72]()
Specification : LEVER CLAMPING REAR LEG ASSY. DS CAT NO. 1005-000675 DC(I) NO. 26178-SA DT- 23.03.06
C
Nonestab
4) SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROTECTOR SUPPORT SCREW FOR MAG[70]()
Specification : DS CAT NO. 5305-011218 DC (I) NO.27020-SA DT. 28.01.17 IN FINISHED CONDITION.
C
Nonestab
5) NUT CLAMPING LEVER for MAG[71]()
Specification : NUT CLAMPING,LEVER TO DS CAT NO. 5310-003306 DC(I) NO. 24091-SA DT- 28.4.98 IN FINISHED CONDITION.
C
Nonestab
6) NUT LOCKING BARREL for MAG[70]()
Specification : NUT LOCKING BARREL"0" NO. SIZE IN FINISHED CONDITION. D.S.CAT NO 5310-002661 DC(I) NO. 25349-SA DT 30.04.02
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.[70]()
Specification : BUSH MOUNTING FRONT TO DS CAT NO. 3120 - 004267 DC(I) NO. 23313-SA DT. 13.4.96 IN FINISHED CONDITION.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) LINK CROSS PIECE LONG DSCATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02[70]()
Specification : LINK CROSS PIECE LONG DS CATNO. 5315-001511 DC(I) 25355-SA DT.07.05.02
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
2) MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BARREL EXTENSION FOR JVPC 5.56MM SK-JVPC-108 AS PER GIVEN SKETCH FROM PROVIDED MATERIAL SIZE 90X90X64MM BY SAF THROUGH L.F.NO.0412894855.
C
Nonestab
3) MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC[70]()
Specification : MANUFACTURING OF BLANK OF BRACKET FORE SIGHT FOR JVPC 5.56MM AS PER GIVEN DRG.NO. SK-JVPC-107. MATERIAL PROVIDED FROM SAF L.F.NO.0334032650 SIZE STEEL FLATE 40 X 50 X 1200MM FOR 30 PIECES.
C
Nonestab
4) Hammer for JVPC[70]()
Specification : HAMMER FOR JVPC 5.56MM
C
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]()
Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]()
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
C
Nonestab
8) FORGING OF TA LINK (6120100104)[61]()
Specification : FORGING FOR T.A.LINK TO DRG.NO.OFM-32851. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS
TECH/04.
C
Nonestab
9) FORGING OF TA GUIDE (6120100103)[61]()
Specification : FORGING FOR T.A. GUIDE TO DRG.NO.OFM-32850. (DRG.ENCLOSED).
(OTHER TECHNICAL REQUIREMENTS AS PER ENCLOSURE No.OFM/TDS/ ECH/03.
C
Nonestab
10) FORGING OF TA CLAMP (6120100102)[61]()
Specification : FORGING FOR T.A. CLAMP TO DRG.NO.OFM-32849 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No OFM/TDS/TECH/02 ENCLOSED.
C
Nonestab
11) FORGING OF TA SHOE (6120100101)[61]()
Specification : FORGING FOR T.A.SHOE TO DRG.NO.OFM-32848 (DRG.ENCLOSED ).
(OTHER TECHNICAL REQUIREMENTS No-OFM/TDS/TECH/01 ENCLOSED.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) BASE TRANSIT FOR 1000LBS (6220901004)[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) BASE TRANSIT (250KG) (6240900104)[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) BASE TRANSIT FOR 450 KG (6230901004)[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16
[W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CONTAINER EXPLODER 1000 LBS (6224121300)[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CONTAINER EXPLODER 450 KG (6230701104)[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.
NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CONTAINER EXPLODER 250 KG (6244121304)[62]()
Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO.
ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG HOUSING HOLDER 250 KG (6240100124)[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2
WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) Nose Plug 250KG (6240900504)[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED).
DRG. ENCLOSED
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) NOSE PLUG 450KG (6230900504)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7
[DRG. ENCLOSED]. [W/O SURFACE TREATED.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) Nose Plug 1000LBS(6220901044)[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE
TREATED]. [DRG. ENCLOSED.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FILLING PLUG ( 250 KG) (6240000504)[62]()
Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO.
ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FILLING PLUG ( 450 KG)(6230400504)[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10.
[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG (MCD) 250KG (6240901205)[62]()
Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED]
DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG 450 KG (MCD) (6231101105)[62]()
Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122
DET 14. [DRG. ENCLOSED].
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG DUMMY 250 KG (6241101114)[62]()
Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5
SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG A/C 34 1000 LBS (6220501010)[62]()
Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE
TREATED/CAD.PLATED)
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG FASTENING 250 KG (6241101124)[62]()
Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01
DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED]
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TA WASHER T-90 (6120100106)[61]()
Specification : TA WASHER TO DRG.NO.OFM-32839.
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) PLUG (MCD) 250KG[62]()
Specification : AS PER OFM SPECIFICATION
R
Nonestab
2) TA PIN BLANK T-90 (6120100118)[61]()
Specification : T.A. PIN BLANK TO DRG. NO. OFM-32951 AS PER SPECIFICATION NO
OFM/TDS/TECH/O6A.
C
Nonestab
3) TA BOLT M-20 (6120100107)[61]()
Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840
DRG.ENCLOSED.
C
Estab
4) TA BOLT M-27 (6120100108)[61]()
Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841
[DRG.ENCLOSED.
C
Nonestab
5) PLUG REAR (6250000501)[62]()
Specification : PLUG REAR TO DRG.No. OFM/30858 [BASED ON ITV 52. [DRG.ENCLOSED]
C
Nonestab
6) SET OF TA SHOE AND TA GUIDE MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
7) SET OF TA SHOE AND TA GUIDE FORGING[61]()
Specification : AS PER SPECIFICATION
C
Nonestab
8) TA CLAMP MACHINED FOLLOWED BY FORGING[99]()
Specification : AS PER SPECIFICATION
C
Nonestab
9) TA LINK MACHINED FOLLOWED BY FORGING[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
10) TRACK LINK DRG. NO. 172.55.012[61]()
Specification : AS PER OFM SPECIFICATION
C
Nonestab
Category : ddp
Grade : Grade I
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Guide Bush As Per Drg no. SK-6711 (For Bomb Aircraft Practice 25 LBS No.1 MK-1) 01[65]()
Specification : Guide Bush As Per Drg no. SK-6711
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Striker Rod as Per Drg.No.SK-9314 (01)[65]()
Specification : As per Drg.No SK-9314
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) Container Cartridge As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A 01[65]()
Specification : As Per Drg. (Part) No. - ITV 45 For Tail Unit 2A
C
Nonestab
Category : p
Grade : Grade I
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) SUSPENSION LUG. SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1[62]()
Specification : SUSPENSION LUG.
SUSPENSION LUG, AS PER DRG. NO. AQAW(A)/SK/MISC/14/1
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB[42]()
Specification : FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
FINISHED FORGED HEAD COMPONENT OF 100/120 KGS. AERIAL BOMB
AS PER TERMS & CONDITIONS OF ANNEXURE 'A' ATTACHED
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1Grey Iron Foundry
Name
Specification
Use
Status
1) FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB AS PER GIF DRAWING NO. 5310-A/FORGE AND TERMS & CONDITIONS ENCLOSED[66]()
Specification : FORGED HEAD (UN-MACHINED) FOR 100-120 KG. AERIAL BOMB
AS PER GIF DRAWING NO. 5310-A/FORGE
C
Nonestab
Category : dp
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FORGING FOR BODY TO DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.[70]()
Specification : AS PER DRG.NO. RFI/SK/7470 OUT OF FIRM'S MATERIAL FOR 0.315 SPORTING RIFLE.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GUIDE RECOIL SPRING DRG.NO.32P 2102*2 FULLY FINISHED CONDITION WITH FIRM'S MATERIAL FOR UBGL[70]()
Specification : AS PER DRAWING
C
Nonestab
2) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
3) BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)[00]()
Specification : AS PER DRG OF BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)
C
Nonestab
4) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
5) BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2097 REQUIRED FOR C1079 RIB RAW MATERIAL STEEL ROUND 56MM WILL BE SUPPLIED BY OFT[00]()
Specification : AS PER DRG OF BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2097
REQUIRED FOR C1079 RIB RAW MATERIAL STEEL ROUND 56MM WILL BE SUPPLIED BY OFT
C
Nonestab
6) BLOCK GAS FORGING TO DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)[70]()
Specification : AS PER DRG. NO.RFI SK 2132-E (FOR RIFLE 7.62 MM 1A1 WITH FIRMS MATERIAL (ICR-1322)
C
Nonestab
7) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]()
Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
C
Nonestab
8) BOLT BREECH FORGING TO DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG NO,TEND 1818*(MODIFIED) required for 0.315" Sporting Rifle
C
Nonestab
9) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]()
Specification : AS PER DRG NO TEND 2383 STR 2
C
Nonestab
10) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
11) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
12) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()
Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL
C
Nonestab
13) CARRIER BREECH BLOCK TO DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)[70]()
Specification : AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)
Specification : AS PER DRG TO CONVERSION FORGING DRG.No. 64C 1026 200 E3
REQUIRED FOR HOLDER C1026
C
Nonestab
18) CONVERSION FORGING TO DRG 64C 5042 200 E3 REQUIRED FOR SEAR TO DRG. NO. 2A42.05.042 (C5042)[00]()
Specification : AS PER DRG TO CONVERSION FORGING TO DRG 64C 5042 200 E3 REQUIRED FOR SEAR TO DRG. NO. 2A42.05.042 (C5042)
C
Nonestab
19) CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093[00]()
Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR
FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
C
Nonestab
20) CONVERSION FORGING TO DRG. NO 62C 5012 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQUIRED FOR LINK STRIPPER A5012 TO DS.CAT.No: 1005-007410.[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG. NO 62C 5012 200 C3
MATERIAL WILL BE SUPPLIED BY OFT
REQUIRED FOR LINK STRIPPER A5012 TO DS.CAT.No: 1005-007410."
C
Nonestab
21) FORGING TO DRG 64C 2007 200 E3. WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007[70]()
Specification : AS PER DRG OF FORGING TO DRG 64C 2007 200 E3.
WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
C
Nonestab
22) CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015)[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015) "
C
Nonestab
23) CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)[00]()
Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 2009 200 G3
REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)
C
Nonestab
24) DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3[70]()
Specification : AS PER DRG OF "DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3
"
C
Nonestab
25) CONVERSION FORGING TO DRG.NO.: 62C 3801 200 B3. FOR LEAF SIGHT REAR (A3801) DSCAT No.1005-007290[00]()
Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 3801 200 B3. FOR LEAF SIGHT REAR (A3801) DSCAT No.1005-007290
"
C
Nonestab
26) EXTRACTOR TO DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle[03]()
Specification : AS PER DRG. NO.29P 0020*2 required for 0.315" Sporting Rifle
1) PRE CUP COMPONENT ANNEALED BLANK FOR 125 MM SCCC BASE TO OFAJ DRG NO CC 471 D[00]()
Specification : PRE CUP COMPONENT (ANNEALED BLANK) FOR 125 MM SCCC (BASE) TO OFAJ DRG. NO. CC-471 D.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) NOZZEL TO ARDE DRG NO 1135 DET 10[00]()
Specification : NOZZEL TO ARDE DRG.NO.1135 DET.10 AL.NO.24/2014 DT.12.11.14
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) JOINT BAND TO DRG NO CAT NO 1192A[00]()
Specification : JOINT BAND TO DRG.NO.CAT.NO.1192A
C
Nonestab
2) JOINT BAND TO DRG NO CAT NO 1371A[00]()
Specification : JOINT BAND TO DRG NO.CAT NO.1371A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF PROOF SHOT 155MM 77B AS PER OFAJ DRG NO SM 959A SCOPE APPLICABLE TERMS AND CONDITIONS ARE AS PER ANNEXURE[00]()
Specification : AS PER ANNEXURE
C
Nonestab
2) NOSE ADAPTER TO CQA[00]()
Specification : as per Drawing
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) BODY SEMI FINISHED TO OFAJ DRG NO FS 1851 E[00]()
Specification : BODY (SEMI FINISHED) TO OFAJ DRG. NO. FS-1851 E
C
Nonestab
2) CAP TO OFAJ DRG NO FS 1160A[00]()
Specification : CAP TO OFAJ DRG.NO. FS-1160A
C
Nonestab
3) HEAD WITHOUT SURFACE TREATMENT TO OFAJ DRAWING NO FS 2936 OR LATEST AMENDED DRG AND SPECN AS ON TE DATE[00]()
Specification : HEAD (WITHOUT SURFACE TREATMENT) TO OFAJ DRAWING NO.FS-2936 OR LATEST AMENDED DRG. AND SPECN AS ON T.E. DATE.
C
Nonestab
4) SAFETY CAP TO CQA A DRG N0 3 016919 DET 26 DC 37284 A DT 6 7 2011[00]()
Specification : SAFETY CAP TO CQA (A) DRG. N0. 3-016919 DET-26 DC-37284-A DT.6 -7-2011
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO FS 2956C ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE SO FIRMS TO INDICATE THE SAME IN THE QUOTATION[00]()
Specification : CONTAINER CARTRIDGE SEMIFINISHED TO OFAJ DRAWING NO.FS-2956C (ONLY ONE RAW MATERIAL TO BE USED FOR ENTIRE CONSIGNMENT OF A SINGLE S.O. FIRMS TO INDICATE THE SAME IN THE QUOTATION)
C
Nonestab
2) CONTAINER CARTRIDGES FULLY FINISHED TO DRG NO ITV 30 DC 37344 A[00]()
Specification : CONTAINER CARTRIDGES FULLY FINISHED TO DRG.NO.ITV-30 DC 37344-A
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917[00]()
Specification : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917.
R
Nonestab
2) TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG NO F1301 047062E DC 36160 A DT 31 08 96[00]()
Specification : TPT NOSE FULLY FINISHED AND SURFACE TREATED AS PER DRG. NO. F1301-047062E DC-36160-A DT.31.08.96
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) COVER FOR DUMMY TRAINING CHARGE 125MM 2527087072[00]()
Specification : COVER AS PER DRAWING NO.4-026706 011 FOR DUMMY TRAINING CHARGE 125MM.
C
Nonestab
2) TUBE FOR DUMMY TRAINING CHARGE 125MM 2527087073[00]()
Specification : TUBE, DIMENSION AS PER DESIGNATION 02 OF DRAWING N0.4 -026706 021 FOR DUMMY TRAINING CHARGE 125MM.
C
Nonestab
3) BOTTOM FOR DUMMY TRAINING CHARGE 125MM 2527087074[00]()
Specification : BOTTOM AS PER DRAWING NO.4-026706 022 FOR DUMMY TRAINING CHARGE 125MM
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Dumdum
Name
Specification
Use
Status
1) CONE RING IN FINISHED CONDITION FOR TU 1111[62]()
Specification : CONE RING,DET NO-6 SHT-2 TO DRG.NO.ARDE-2139 (ISSUE-I) AL NO. 2/95 DT. 11.01.95 IN FINISHED CONDITION
C
Estab
2) CONE RING IN FINISHED CONDITION FOR TU TB 250[62]()
Specification : CONE RING ASSEMBLY' FOR TU TB 250 TO DRG.NO. OFDC SK-2420 IN FINISHED CONDITION
C
Estab
3) FIN ASSY DET NO 1 SHT 7 TO DRG NO ARDE 2121 IN SEMI FINISHED CONDITION UPTO TACK WELDING[62]()
Specification : FIN ASSY.DET NO-1 SHT-7 TO DRG.NO.ARDE-2121 IN SEMI-FINISHED CONDITION UPTO TACK WELDING
C
Estab
4) FORGING OF STABILIZER BODY IN ROUGH MACHINED AS PER DRG NO OFDC SK1559f IN NORMALISED CONDITION[62]()
Specification : FORGING OF STABILIZER BODY IN ROUGH MACHINED AS PER DRG.NO. OFDC SK.1559(f) IN NORMALISED CONDITION
C
Estab
5) CONE RING SMALL FOR RTU 1121[62]()
Specification : CONE RING SMALL DET NO-61 TO DRG.NO.ARDE-1947,AL NO.698 DT. 23.02.93 IN FINISHED CONDITION
C
Estab
6) CLOSING DISC ASSY IN FC FOR RTU 1121[62]()
Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Estab
7) CONE RING LARGE AND PIN LOCKING FOR RTU 1121[62]()
Specification : CONE RING LARGE & PIN LOCATING TU-ASSY. DET NO-62 SHT-1 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Estab
8) CONE RING AND KEY WELDING ASSY FOR BTU 450[62]()
Specification : CONE RING & KEY(WELDING ASSY.)TO DET NO-1 SHT-3 TO DRG.NO. ARDE-2121 IN FINISHED CONDITION
C
Estab
9) CONE RING LARGE AND PIN LOCKING FOR RTU 2231[99]()
Specification : CONE RING LARGE & PIN LOCKETING ASSY.TO DRG. NO. ARDE -2239 DET, NO. 4 IN FINISHED CONDITION
C
Estab
10) CONE RING FRONT ASSY IN FINISHED CONDITION FOR TR 250[62]()
Specification : CONE RING FRONT ASSY.;DET.NO.:23 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION
C
Estab
11) CONE RING SMALL IN FINISHED CONDITION FOR RTU 2231[62]()
Specification : CONE RING SMALL DET NO-7 TO DRG.NO.ARDE-2239,AL NO.21/97 DT. 20.08.97 IN FINISHED CONDITION
C
Estab
12) CLOSING DISC ASSY IN FINISHED CONDITION FOR RTU 2231[99]()
Specification : CLOSING DISC ASSY. DET.NO-39 TO DRG.NO.ARDE-1947 IN FINISHED CONDITION
C
Estab
13) CONE RING REAR IN FC FOR TR 250[62]()
Specification : CONE RING REAR TO DRG. NO. ARDE 9501-02, DET NO. - 26 IN F.C
C
Estab
14) CLOSING RING ASSY IN FINISHED CONDITION FOR TR 250[62]()
Specification : CLOSING RING ASSY.;DET.NO.:45 TO DRG.NO.:ARDE 9501-02 IN FINISHED CONDITION
1) Fabrication of Coat Combat Disruptive, Detachable with Indian Army Logo[J0]()
Specification : S/2594/CCD Army Logo/TC-15 (a)
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Border stitching on Blankets[21]()
Specification : Spcn: (a) Stitch No.406 on Border of Blanket (b) Machine and Maintenance shall be provided by the Factory (c) Free Power Supply shall be provided by the Factory.
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Cap Balaclava OG (Imp.)[21]()
Specification : S/5094/TC-1(b)/CAP BAL OG(IMP)
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Smock Denision [21]()
Specification : IND/TC/4675 & Approved Samples
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Shirt Plain weave PV Dope Dyed OG[21]()
Specification : IND/TC/4698(b)
R
Estab
2) Fabrication of Trouser Plain weave PV Dope Dyed OG[21]()
Specification : IND/TC/4630(m)
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()
Specification : Provisional Specification No. S/2764/OC Army Logo/TC-15
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Coat ECC imp. Ver.[J0]()
Specification : IND/TC/4587 (C) and Approved sample
Specification : Fab. of Trousers Wind Cheater. As per Specification No. IND/TC/4678
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Jacket Wind Cheater[21]()
Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF SOCKS MENS WOOL DARK OG[21]()
Specification : FABRICATION OF SOCKS MEN'S WOOL DARK OG
Specification:- Fabrication (Knitting, Linking, Asst. to Linking, Washing, Pressing, Checking and Darning) of Socks Men’s Wool Dark OG, As per Specification no. PROV/OCFS/SOCKS/ARMY/NEW 64(a) & ANN
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED[21]()
Specification : FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED)
SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabrication of Cap Glacier[21]()
Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Debarred
Name
Specification
Use
Status
1) Polyester Satin Piping 7 cm Red (As Sole-Selling Agent)[21]()
Specification : As per Requirements & Specifications
Specification : As per Requirements & Specifications
R
Estab
3) Double Layer bonded Polyester Fleece White 150 cm width[21]()
Specification : IND/TC/1208
R
Estab
4) Polyester Fleece Fabric Knitted O G 150 cm min[21]()
Specification : SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
R
Nonestab
Category : S
Grade : III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Debarred
Name
Specification
Use
Status
1) Polyester Satin Piping 7 cm Red (As Sole-Selling Agent)[21]()
Specification : As per Requirements & Specifications
Specification : As per Requirements & Specifications
R
Estab
3) Double Layer bonded Polyester Fleece White 150 cm width[21]()
Specification : IND/TC/1208
R
Estab
4) Polyester Fleece Fabric Knitted O G 150 cm min[21]()
Specification : SPECN: AS PER APPENDIX 'C' OF PROV.
SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG
(Imp)RELEVANT CLAUSE OF SPECIFICATION
NO. IND/TC/1208 AS PER SPECIFICATION NO.
IND/TC/1208
R
Nonestab
5) FABRICATION OF JCD AND TCD IAL 220 GSM IN SET[17]()
Specification : OCFAv/GARMENT/001(c)AND OCFAv/GARMENT/002(c) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 220 GSM INSET
E
Nonestab
6) FABRICATION OF JCD AND TCD IAL 250 GSM IN SET[17]()
Specification : OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET
E
Nonestab
Category : S
Grade : III
Size :
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF SUIT WINTER[21]()
Specification : AS PER RELEVANT CLAUSE OF SPECIFICATION IAFS: 01042:2017 -OCF, SHAHAJAHANPUR
E
Estab
2) Fabrication of Bag Kit Universal (Mark-II)[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
2) HDPE Bag White in Size 75X50X100 cm[21]()
Specification : As per Requirements & Specifications
R
Estab
3) Fabrication of Comp. Rib Knit Jersey Dark OG [21]()
Specification : As per Requirements & Specifications
R
Estab
4) Trade Fabrication of Jersey Woollen Dark OG/BG Stitching[21]()
Specification : Trade Fabrication of Jersey Woollen Dark OG/BG Stitching (i) Jersey Cut Components will be provided by OCFS along with Reinforcement Pieces and other Garniture.(ii) Jersey will be Stitched as per provided pattern /scale OCFS. (iii) Othe
R
Estab
5) Fabrication of Trousers Combat PC Dis. With Indian Army Logo[21]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Nonestab
2) LPTA Stud for water Tank[90]()
Specification : STUD FOR WATER TANK FITMONT (4/SET) 2614 7061 8801 NOTE: - TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Nonestab
3) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
4) LPTA ASSY FUEL TANK COMPLETE[90]()
Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Assy 5th Cross Members BS III 715[90]()
Specification : 5TH CROSS MEMBER BS-III 715 LPTA VEHICLE, PART NO. 263631208201-A1-a-V2
C
Nonestab
2) LPTA Assy Water Tank Insulated 55 lt[90]()
Specification : ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Hex Nut M16 X 2[90]()
Specification : HEX NUT M16X2 GALVD. & YELLOW PASSIVATED IS - 1364-1992 PT. 111-P8
C
Nonestab
2) LPTA PLAIN NUT M12 X 1 75[90]()
Specification : PLAIN NUT M12 X 1.75 GALV. & YELLOW PASSIVATED DRG./PART NO. L-3011218 IS -1364-1992 PART - 3, P-8
C
Nonestab
3) LPTA Stud for water Tank[90]()
Specification : STUD FOR WATER TANK FITMONT (4/SET) 2614 7061 8801 NOTE: - TO BE SUPPLIED IN YELLOW PASSIVATED CONDITION
C
Nonestab
4) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
5) LPTA ASSY FUEL TANK COMPLETE[90]()
Specification : ASSY FUEL TANK COMPLETE 2154 4750 0102-V2 WITH ASSY DIP STICK PTNO.261447100211 FLOAT VALVE DRG.0005420.204J (215447500101(V-2) ASSY.AIR BREATHER PTNO 2574 2815 9901 & SUCTION TUBE WITH FUEL TANK(275147100106)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) VFJ BADGE FOR CABIN[90]()
Specification : VFJ BADGE FOR CABIN (IN HINDI) VFJ BADGE FOR CABIN (IN HINDI) FOR STALLION MK-III VEH. DRG.NO. VFJ/17/09/00051-V1
C
Nonestab
2) Load Body Accessories[90]()
Specification : As per specification / drg.
C
Nonestab
3) Pad[90]()
Specification : As per specification / drg.
C
Nonestab
4) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
Specification : BRACKET BLACK OUT HEAD LAMP, PART NO. X-7153914-#
C
Nonestab
9) T BOLT CLAMP[90]()
Specification : T BOLT CLAMP (79DIA), PART NO. X-3900310
C
Nonestab
10) BUMPER CROSS MEMBER[90]()
Specification : BUMPER CROSS MEMBER PT.NO.B8136507(B.0)
C
Nonestab
11) BOTTOM X MEMBER[90]()
Specification : BOTTOM X MEMBER PT.NO.X4632614-C
C
Nonestab
12) CROSS MEMBER AGB REAR[90]()
Specification : CROSS MEMBER AGB-REAR PT.NO.B8136503(E)
C
Nonestab
13) BRACKET FUEL TANK BRACKET[90]()
Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1
C
Nonestab
14) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
15) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) WELDING ELECTRODES SIZE: 3.15 MM[90]()
Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE
R
Nonestab
2) WELDING ELECTRODES SIZE: 4 MM[90]()
Specification : CQA (M) 57-2013 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
R
Nonestab
3) WELDING ELECTRODES SIZE: 5 MM[90]()
Specification : CQA (M) 57 TO BE FOLLOWED FOR INSPECTION PROCEDURE OTHER THAN CHEMICAL COMPOSITION
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SEAT BASE ASSY FRONT LHS[90]()
Specification : SEAT BASE ASSY (FRONT LHS) DRG. NO. 640-08-1070-1/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SPRING HANGER BRACKET (REAR SUSPENSION)[90]()
Specification : SPRING HANGER BRACKET (REAR SUSPENSION) DRG. NO. 620-02-1210-1/D
C
Nonestab
2) BRACKET CRANK ARM[90]()
Specification : BRACKET CRANK ARM DRG.NO. AMBV/00800-A
C
Nonestab
3) S A OF FOOT STEP[90]()
Specification : S/A OF FOOT STEP DRG/PART NO.B5296504
C
Nonestab
4) MS ANGLE IRON 50x50x6MM[90]()
Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062
R
Nonestab
5) MS CHANNEL 75x40x40[90]()
Specification : MS CHANNEL SZ (75×40×40)MM × 4.7 MM THICK TO SPECN IS-2062/94 (RE) CR "SK" IN STREIGHT LENGTH OF 1015 MM
R
Nonestab
6) SQ TUBE 40x40[90]()
Specification : SQ TUBE 40×40×1.6 THICK SPECN IS-4923 ERW (1) 18224.00 MTRS IN LENGTH OF 2278 MM (2) 4792.00 MTRS IN LENGTH OF 2396 MM (3) 3275.00 MTRS IN LENGTH OF 5000 MM OVERALL TOLERANCE IN LENGTH (+) NIL (-) 2 MM
R
Nonestab
7) MS PLATE 12 MM IS 2062[90]()
Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"
R
Nonestab
8) MS PLATE 16 MM IS 2062 GR B[90]()
Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG
R
Nonestab
9) MS PLATE 25 MM THICK[90]()
Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42
R
Nonestab
10) HOOK PART NO 675 57271 A[90]()
Specification : HOOK PART NO 675-57-271/A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CATCH LOCK ASSY DRG NO IA 053 4 CO item code 9911358061[99]()
Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX C-235(STEEL) FOR BOMB 25 LBS[65]()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.1A-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL
P
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX M-104 MK-1 STEEL DD(L)11325[65]()
Specification : BOX M-104 MK-1 (STEEL) TO DESIG.REF. DD(L) 11325, SHT-1 DRG PART NO SV-22-A DC NO.35994-A DT.12-8-95.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF CARRIER 4A/L & CARRIER 5A/L[99]()
Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Drinking Water Tank For STLN MK-IV.BS-III - X4110910[90]()
Specification : As per specification / Drawings
C
Nonestab
2) BOTTOM X MEMBER[90]()
Specification : BOTTOM X MEMBER PT.NO.X4632614-C
C
Nonestab
3) BRACKET FUEL TANK BRACKET[90]()
Specification : BRACKET-FUEL TANK BRACKET P.NO. X7184610-B.1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) Rubber Sheet for BP SML L F no 9413100022000[90]()
Specification : Specific Gravity 1.4 to 1.5 shore hardness 55-65. in black colour.
R
Nonestab
2) Drinking Water Tank Drg No 640 01 1450 1 D[90]()
Specification : Drinking Water Tank Drg.No.640-01-1450-1/D
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) All types of sheet metal press works, capacity up to 100 tons and bed size 3’x2’[90]()
Specification : As per GCF requirements/specification.
1) SET OF FINISHED OPTICS CONSISTING OF FOLLOWING:(1) LENS,OPTICAL INSTRUMENT I & II AS PER DRG. NO. IRDE-1035/12, 1/SET. (2) LENS,OPTICAL INSTRUMENT III,IV,V AS PER DRG.NO.IRDE-1035/7, 1/SET.[26]()
Specification : SET OF FINISHED OPTICS CONSISTING OF
FOLLOWING:(1) LENS,OPTICAL INSTRUMENT
I & II AS PER DRG. NO. IRDE-1035/12, 1/SET.
(2) LENS,OPTICAL INSTRUMENT III,IV,V
AS PER DRG.NO.IRDE-1035/7, 1/SET.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) RETICLE, OPTICAL INSTRUMENT, AS PER DRG. NO. GF-235113H[26]()
Specification : RETICLE , OPTICAL INSTRUMENT AS PER DRG. NO. GF-235113H
C
Nonestab
2) RETICLE FOR 3X12 AS PER DRG. CQA(I)-793/51 (F1303-028450) FOR M10 ASSY. OF TEL. MARK-III[26]()
Specification : RETICLE FOR 3X12 AS PER DRG. NO. CQA(I)-793/51 (F1303-028450) FOR M10 ASSY. OF TEL. MARK-III
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) Set of Prism for HR Bino,[26]()
Specification : Set of Prism for HR Bino,MCT- 2954/1, 2976/1
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Dehradun
Name
Specification
Use
Status
1) FINISHED SUN FILTER LMG[26]()
Specification : FINISHED SUN FILTER GLASS NS-2 AS PER DRAWING NO. MCT-2238 FOR LMG
C
Nonestab
2) A SET OF FINISHED OPTICS AS PE[26]()
Specification : SET OF FINISHED OPTICS COMPRISING OF THE FOLLOW.LENSES WITH DRGS: 1)LENS I&II MCT1439 1/SET.2)LENS III&IV/ VI&VII MCT1440 2/SET.3)LENS V MCT1441 1/ SET.4)LENS VIII&IX/X&XI MCT1442 2/SET.5) LENS XIII MCT1443 1/SET.6)LENS XIV&XV MC T1444 1/
C
Nonestab
3) ACHROMATE CEMENTED[26]()
Specification : ACHROMATE, CEMENTED DRG.NO.CQA(I)789/SA-2 (MCT-2973) FOR HR BINO.
C
Nonestab
4) ACHROMATE ASSY TELE SIGHTING MK III[74]()
Specification : ACHROMATE ASSY.CONSISTING OF 2 COMPONENT 1.SHADE,OBJECTIVE.DRG NO. MCT-2516 1/SET,2.SCREW RING,HOUSING,OBJECTIVE TO DRG NO. MCT-2517 1/SET FOR TELE.SIGHTING MK-III,.
C
Nonestab
5) CHANCE FILTER ON 11A 2TO3MM TH[26]()
Specification : FILTER GLASS ON-11A,2MM+0.2,-0 THICK SIZE-75MM X 75MM.(NEUTRAL)
C
Nonestab
6) FILTER GL C RED R G610[26]()
Specification : GLASS SCHOTT RED FILTER RG-610 3 TO 4MM THICK SIZE-50MM X 50MM
C
Nonestab
7) GL CH FILTER OR2[26]()
Specification : RED FILTER GLASS CHANCE TYPE OR-2 OR OG-590 SCHOTT 4 TO 5 MM THICK. SIZE-3"X3".
C
Nonestab
8) GLASS BSC 510644[26]()
Specification : GLASS MOULD AS PER DRG. NO.ODD/C/934 BSC-510644 SPECIFICATION NO.IS-1400/1960
C
Nonestab
9) GLASS BSC 517642 ODD C 830 2MD[26]()
Specification : OPT.GLASS MOULD ASPER DRG.ODD/C/830/2 IS-1400/1960 GLASS TYPE BSC-517642(BK-7)
Specification : GLASS SHEET B-270 SCHOTT,SIZE- 254MMX400MMX2.0 THICK FOR H.R.BINO.
C
Nonestab
23) GRATICULE[26]()
Specification : GRATICULE AS PER DRG.NO.MCT-1595(3 SHEETS) FOR D/S TELE.5.56MM RIFLE
C
Nonestab
24) GRATICULE BLANK[26]()
Specification : GRATICULE BLANK FOR 5,56MM RIFLE, IRDE-2603/16(MCT-1595/3.
C
Nonestab
25) JEWEL[00]()
Specification : JEWELL TO DRG NO. MCT-794
C
Nonestab
26) LENS[74]()
Specification : LENS AS PER DRG.NO. AL5.930.056
C
Nonestab
27) LENS DRG NO CQA I 789 31[26]()
Specification : LENS OPTICAL INSTRUMENT TO DRG.NO. CQA(I)789/31(MCT-2981/1)2 SHT FOR HR BINO 8X30 R.
C
Nonestab
28) LENS DRG NO CQA I 789 27[26]()
Specification : LENS OPT.INSTRUMENT TO DRG.NO. CQA(I)789/27 (MCT-2980/1)2 SHT. FOR HR BINO 8X30 R.
C
Nonestab
29) OBJECTIVE CEMENTED[26]()
Specification : OBJECTIVE,CEMENTED,DRG.NO.CQA(I)789/SA-6 (MCT-2977) FOR HR BINO.
C
Nonestab
30) OPT GLASS BK 7 MLD ODD C 831 1[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWING NO. ODD/C/831/1.
C
Nonestab
31) OPT GLASS BK7[26]()
Specification : OPTICAL GLASS BSC-517642(BK-7)MOULD TO DRAWING NO.ODD/C/934/1.
C
Nonestab
32) OPT GLASS BK7 MLD ODD C 936 1[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWING NO ODD/C/936/1.
C
Nonestab
33) OPT GLASS BK7 MLD ODD C 925 1[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWIGN NO ODD/C/925/1.
C
Nonestab
34) OPT GLASS BK7 MLD ODD C 830 2[26]()
Specification : OPTICAL GLASS BK-7 MOULD TO DRAWING NO ODD/C/830/2.
C
Nonestab
35) OPT GLASS MOULD ODD C 924 2[26]()
Specification : OPTICAL GLASS MOULD AS PER DRG.NO.:ODD/C/924/2
C
Nonestab
36) OPT GLASS BK7 MLD ODD C 966 1[26]()
Specification : OPTICAL GLASS BSC-517642(BK-7)MOULD TO DRAWING NO.ODD/C/966/1,IS:1400/1960.
C
Nonestab
37) OPTICAL GLASS DBC 610573[26]()
Specification : OPTICAL GLASS DBC-610573, IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK THICKNESS=14MM +0.5MM-0MM, IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
38) OPTICAL GLASS DBC 613568[26]()
Specification : OPTICAL GLASS DBC-613568, IN CYLINDRICAL SHAPE DIA=17MM +1MM-0.5MM, BLANK THICKNESS=8MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
39) OPTICAL GLASS DF 617366[26]()
Specification : OPTICAL GLASS DF-617366, IN CYLINDRICAL SHAPE DIA=29MM +1MM-0.5MM, BLANK THICKNESS=7MM +0.5MM-0MM , IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
40) OPTICAL GLASS DF 617366[26]()
Specification : OPTICAL GLASS DF-617366, IN CYLINDRICAL SHAPE DIA=45MM +1MM-0.5MM, BLANK THICKNESS=18MM +0.5MM-0MM, IS:1400-1960,STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
C
Nonestab
41) OPTICAL GLASS LF 579411[26]()
Specification : OPTICAL GLASS LF-579411, IN CYLINDRICAL SHAPE DIA=16MM +1MM-0.5MM, BLANK THICKNESS=13MM +0.5MM-0MM, IS:1400-1960, STRIAE GRADE-A INCLUSION GRADE SMALL-B, FINE ANNEALED SO THAT STRESS BIREFRINGENCE IS NOT MORE THAN 10 NM/CM.
Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).
C
Nonestab
4) CYLINDER GAS FOR RIFLE 5.56MM INSAS[70]()
Specification : CYLINDER GAS TO DSCAT NO.1005-560066(LATEST DC-25824-SA DT.29/07/03) FOR RIFLE 5.56MM INSAS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEAF BACK SIGHT FOR ASSAULT RIFLE GHAATAK[7020300114]()
Specification : LEAF BACK SIGHT FOR ASSAULT RIFLE GHAATAK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) BLOCK REAR BLANK FOR GHAATAK[70]()
Specification : BLOCK REAR BLANK FOR 7.62MM ASSAULT RIFLE AS PER DRG NO.RFISK NO.9498/1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) MODIFIED LEVER CHANGE FOR ASSAULT RIFLE GHAATAK[70]()
Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) SPACER FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/03/5.[70]()
Specification : SPACER FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/03/5.
C
Nonestab
2) CHANNEL LEFT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/03/6-RFI.[70]()
Specification : CHANNEL LEFT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/03/6-RFI.
C
Nonestab
3) CHANNEL RIGHT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/03/7-RFI.[70]()
Specification : CHANNEL RIGHT FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/03/7-RFI.
5) GUIDE, SPRING RECOIL REAR TO D.S. CAT NO.1005-007809 (DC-26467-SA). FOR RIFLE 5.56MM INSAS.[79]()
Specification : GUIDE, SPRING RECOIL REAR TO D.S. CAT NO.1005-007809 (DC-26467-SA). FOR RIFLE 5.56MM INSAS.
C
Nonestab
6) LEVER CHANGE FOR 7.62MM ASSAULT RIFLE AS PER DRAWING NO.AR/012/1-RFI.[70]()
Specification : LEVER CHANGE FOR 7.62MM ASSAULT RIFLE AS PER DRAWING NO.AR/012/1-RFI.
C
Nonestab
7) HOUSING PLUNGER FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/01/25.[70]()
Specification : HOUSING PLUNGER FOR 7.62MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/01/25.
C
Nonestab
8) PLUNGER FOR 7062 MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/01/26.[70]()
Specification : PLUNGER FOR 7062 MM ASSAULT RIFLE (GHAATAK) AS PER DRG. NO. AR/01/26.
C
Nonestab
9) LEAF BACK SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/01/28.[70]()
Specification : LEAF BACK SIGHT FOR 7.62 MM ASSAULT RIFLE (GHAATAK) AS PER DRG.NO. AR/01/28.
C
Nonestab
10) SEAR FOR 7.62MM ASSAULT RIFLE AS PER DRG. NO.ARDE SK 3147/14[70]()
Specification : SEAR FOR 7.62MM ASSAULT RIFLE AS PER DRG. NO.ARDE SK 3147/14
C
Nonestab
11) BLOCK FIXING PISTOL GRIP TO DS CAT NO.1005-007784 ( DC-26502-SA ). FOR RIFLE 5.56MM INSAS.[79]()
Specification : BLOCK FIXING PISTOL GRIP TO DS CAT NO.1005-007784 ( DC-26502-SA ). FOR RIFLE 5.56MM INSAS.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) COCKING PIECE FOR 12 BORE PUMP ACTION GUN.[70]()
Specification : BS:970 PT.I-83. 709 M 40 'W' CONDITION.
C
Nonestab
2) BREECH BLOCK SLIDE FOR 12 BORE PUMP ACTION GUN.[70]()
Specification : IS:4368-1967 Gd-13. Ni3 Cr80
CASE HARDNESS:-500-550 VPN
CASE DEPTH:-0.6 TO 1mm
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) BAND FORE SIGHT FOR SPORTING RIFLE[70]()
Specification : BAND FORE SIGHT FOR 0.22" SPORTING RIFLE
C
Nonestab
2) EXTRACTOR FOR SPORTING RIFLE[70]()
Specification : EXTRACTOR FOR 0.22'' SPORTING RIFLE
C
Nonestab
3) STRIKER PIN FOR SPORTING RIFLE[70]()
Specification : STRIKER PIN FOR 0.22'' SPORTING RIFLE
C
Nonestab
4) HOLDER FOR SPORTING RIFLE[70]()
Specification : HOLDER FOR 0.22'' SPORTING RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER HOLDER FOR 12 BORE PUMP ACTION GUN[70]()
Specification : LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEAF BACK SIGHT FOR ASSAULT RIFLE GHAATAK[7020300114]()
Specification : LEAF BACK SIGHT FOR ASSAULT RIFLE GHAATAK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) PIN HAMMER,TRIGGER,SAFETY SEAR FOR 7.62MM GHAATAK[70]()
Specification : PIN HAMMER,TRIGGER,SAFETY SEAR FOR 7.62MM GHAATAK AS PER DRAWING NO. AR/01/34-RFI.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) CATCH SAFETY TO DRG. NO.SP-46 (LATEST DC-RFI NO.04/030/02DATED 30/7/02) FOR .315[70]()
Specification : AS PER DRAWING
C
Nonestab
2) SEAR TO DRG. NO. SP-60 (LT. DC-04/005/02 DT.25-03-2002)FOR .315[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) EXTRACTOR RIGHT FOR 12 BORE PUMP ACTION GUN[70]()
Specification : EXTRACTOR RIGHT FOR 12 BORE PUMP ACTION GUN,
C
Estab
2) BREECH SLIDE LOCKFOR 12 BORE PAG[70]()
Specification : BREECH SLIDE LOCKFOR 12 BORE PAG
C
Estab
3) MAGAZINE TUBE LOCKING HOLDER FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE LOCKING HOLDER FOR 12 BORE PAG
C
Estab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) SPRING PLUNGER HOUSING AND STOP PIN FOR GHAATAK[70]()
Specification : SPRING PLUNGER HOUSING AND STOP PIN FOR 7.62MM GHAATAK AS PER DRG NO. AR/01/27
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) SEAR FOR 9MM AUTO PISTOL 1A.[70]()
Specification : IS:3748 : 1990 DESIGNATION 75 T-6
C
Nonestab
2) ARM SEAR CONNECTING TO DS CAT.NO.1005-003196(DC-26816-SA DT.16-4-2016)(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PERCOL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1)&(NMIR TEST TOIS : 4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTESHEET NO.1).[70]()
Specification : AS PER DRAWING
C
Nonestab
3) LOCKING PIECE TO DS CAT NO. 1005-003146( LT.DC-24599 SA.DT.27-12-99 )(MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PER COL.(C) OF SL.NO.1 OF CQA(SA) NOTE SHEET NO.1 & NMIR TESTTO IS : 4163 WILL BE AS PER COL.(C) SL.NO.3 OF CQA(SA) NOTESHEET NO.1. FOR P[70]()
Specification : AS PER DRAWING
C
Nonestab
4) GUIDE SPRING MAIN ASSY.DS CAT NO.5360-007390(LT.DC-25139-SADT.08-10-2001)CONSISTING OF 1)GUIDE SPRING MAIN-1005-003186(DC-26826-SA),2)PLUG GUIDE-1005-003187(DC-26832-SA),3)SPRINGLEVER LOCKING 1005-003188 (DC-26816-SA) & CHROMIUM ALLOYSTEEL BALL 3.97M[70]()
Specification : As per drawing.
C
Nonestab
5) LINK HAMMER TO DSCATNO.3040-003489(LT.DC-25056-SA,DT.2/7/01)( MACROETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1 ) & (NMIR TEST TO IS:4163WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.1FOR PISTOL[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*[70]()
Specification : LEVER HOLDER FOR 12 BORE PUMP ACTION GUN, RFI DRG. NO. PAG-0012*
C
Nonestab
2) TGG-103,LOWER BLOCK BARREL FOR TEAR GAS GUN (LATEST DC RFI NO. 09/022/14 DT.27.03.14) FROM TRADE SOURCE.[70]()
Specification : TGG-103,LOWER BLOCK BARREL FOR TEAR GAS GUN (LATEST DC RFI NO. 09/022/14 DT.27.03.14) FROM TRADE SOURCE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) MODIFIED SAFETY LEVER FOR 0.32[70]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG[70]()
Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG
Specification : CYLINDER GAS TO DSCAT NO.1005-560066(LATEST DC-25824-SA DT.29/07/03) FOR RIFLE 5.56MM INSAS
C
Nonestab
5) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A.[70]()
Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
C
Nonestab
6) LINK HAMMER FOR PISTOL AUTO 9MM 1A[70]()
Specification : LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 O
1) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III
Description : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III()
Specification : REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III
C
Estab
2) CATCH REAR SIGHT CURSOR for MAG
Description : CATCH REAR SIGHT CURSOR for MAG()
Specification : CATCH REAR SIGHT CURSOR (2P) EACH FOR MAG 7.62MM DS CAT NO. 1005-000434 DC(I) NO. 25292-SA DT- 14.3.2002 IN FINISHED CONDITION.
C
Estab
3) GUIDE, UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 25338-SA DT- 23.4.02 IN WITHOUT HEAT TREATMENT CONDITION.
Description : GUIDE, UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 25338-SA DT- 23.4.02 IN WITHOUT HEAT TREATMENT CONDITION.()
Specification : GUIDE, UPPER RIGHT TO DS CAT NO. 1005-006839 DC(I) NO. 25338-SA DT- 23.4.02 IN WITHOUT HEAT TREATMENT CONDITION.
C
Estab
4) PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
Description : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10()
Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON BLANK AS PER DRG NO TEND 2547 STAR 5 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 STAR 5 WITH FIRMS MATERIAL
C
Nonestab
2) REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL[70]()
Specification : REAR GUIDE RETAINER TUBE AS PER DRG NO K 2092STAR3 WITH FIRMS MATERIAL
C
Nonestab
3) COMPENSATOR 2016[70]()
Specification : COMPENSATOR TO PART NO. 2A42.02.016 WITH FIRM'S MATERIAL REQD FOR 30MM CANNON (C2016)DC NO. 18845-W DT. 13.01.2004 FOR DC LATEST ISSUE TO BE FOLLOWED
E
Nonestab
4) SUPPLY OF PIN FIXING TRUNNION AS PER DRG No K 4008 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : AS PER DRG No K_4008 WITH FIRMS MATERIAL REQUIRED FOR TAR
1) 6432100101 STEEL CUP WITH SEAL ARDE 2120 120ARJUN[64]()
Specification : CQA(A)5709
P
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432100001 STEEL CUP WITH SEAL ARDE 2120 120 ARJUN[64]()
Specification : CQA(A) 5709
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432200002 STL CUP WITH SEAL HESH 120MM ARJUN[64]()
Specification : STEEL CUP WITH SEAL FOR HESH TO DRG.PART NO. IRW 30 SA.
C
Nonestab
Category :
Grade : Grade III
Size :
L
1853
G. N. SPRING INDUSTRIES
93 SECTOR- H INDUSTRIAL AREA GOVINDPURA BHOPAL GOVINDPURA BHOPAL Madhya Pradesh
PIN1 : 462023
Phone No. : 4283452 GSTIN :
23ADWPT8984F1ZL
Specification : CASTING OF BEARING HOUSING FOR 155 MM X 39/45 CAL FH GUN M/C DRG.NO. 3052903. CASTING DRG.NO. 3053353.
(MATERIAL-BOFORS.SS-2225-04,EQUIVALENT TO BS-970 PT-I 1983, [605M36)
22) CRADLE TO DRG.NO.172-94-001/C (7200094001)[72]()
Specification : STEEL CASTING OF CRADLE TO DRG.NO. 172-94-001/C
C
Nonestab
23) MANTLET 172.20.034 (7210020034)[72]()
Specification : MANTLET TO DRG.NO.172.20.034
C
Nonestab
24) EXTERNAL DISC 765-16-8 (8200000168)[82]()
Specification : STEEL CASTING EXTERNAL DISC TO DRG.NO. 765-16-8.
C
Nonestab
25) HOUSING TO DRG.NO.188.94.001.2 (9018894001)[90]()
Specification : STEEL CASTING FOR HOUSING TO DRG.NO.188-94-001-2 FOR CODE 94/T-90.TRV.RED.GEAR UNIT
C
Nonestab
26) CASTING FOR BRACKET MEG..183-2 (8200054183)[82]()
Specification : CASTING FOR BRACKET TO DRG.NO. MEG-54-04-183-2
C
Nonestab
27) STL CASTING OF FORK 172.94.002 (7200094002)[72]()
Specification : STEEL CASTING OF FORK TO DRG.NO. 172-94-002.
C
Nonestab
28) STEEL CAST.CRADLE MODIFIED (7200000023)[72]()
Specification : MANUFACTURING OF STEEL CASTING OF CRADLE MODIFIED OF 12.7 MM GUN TO DRAWING NO.IRD/PRG/023
C
Nonestab
29) CASTING FOR BRACKET 2A.46M.109 (9010982000)[90]()
Specification : CASTING FOR BRACKET TO DRG.NO. 2A46M.109-82
C
Nonestab
30) HOUSING RIGHT DRG.NO.3052979 (1603052979)[16]()
Specification : CASTING OF HOUSING RIGHT FOR 155MM X 39/45 CAL FH GUN DRG.NO-3052979
C
Nonestab
31) HOUSE , COT.SK-2446 REV.B (1602446000)[16]()
Specification : CASTING FOR HOUSE FOR 155 MM X 39/45 CAL FH GUN DRG. NO.2025 296 (COT.SK-2446 REV.B) NC/TC NO-140A
C
Nonestab
32) BRACKET DRG.NO. 2025460 (1602025460)[16]()
Specification : [CASTING OF BRACKET FOR 155 MM X 39/45 CAL FH GUN DRG.NO.5500. CASTING DRG.NO. 2025460. (MATERIAL-BOFORS SS-2225-04,EQUIVALENT TO BS-970-PT-I 1983,[605M36)
C
Nonestab
33) BRACKET DRG.NO. 2025651 (1602025651)[16]()
Specification : CASTING OF BRACKET FOR 155 MM X 39/45 CAL FH GUN DRG.NO.MACHINED DRG.NO.2025499. CASTING DRG.NO.2025651. (MATERIAL-BOFORS-SS-2225-04 EQUIVALENT TO BS-970 PT-I,1983,605M36. NC/TC NO-140A
Specification : CASTING OF BEARING HOUSING FOR 155 MM X 39/45 CAL FH GUN M/C DRG.NO. 3052901, CASTING DRG.NO. 3053355.
NC/TC NO-140A
C
Nonestab
35) TRAIL BEARING LEFT 3053351 (1603053351)[16]()
Specification : CASTING OF TRAIL BEARING LEFT FOR 155MM X 39/45 CAL FH GUN DRG.NO-3053351
C
Nonestab
Category : ddp
Grade : Grade I
Size :
L
1Heavy Alloys Penetrator Project
Name
Specification
Use
Status
1) HEAD ROCKET BODY PRE-MACHINED FOR RGB -60[12]()
Specification : AS PER DRAWING.
C
Nonestab
Category : dp
Grade : Grade I
Size :
L
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) CASTING FOR BLANK UPPER RACE RING[90]()
Specification : CASTING FOR BLANK UPPER RACE RING
C
Nonestab
2) CASTING FOR LOWER RACE RING[90]()
Specification : CASTING FOR LOWER RACE RING
C
Nonestab
3) CASTING FOR COMMANDER RING[90]()
Specification : CASTING FOR COMMANDER RING
C
Nonestab
Category : p
Grade : Grade I
Size :
L
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY[99]()
Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB.
E
Nonestab
Category : ddp
Grade : Grade II
Size :
L
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 1000 LBS MK-II(N) HE (N&T) EMP[99]()
Specification : EMPTY ASSY.BOMB HE A/C M.C. 1000 LBS ( 450 KG ) MK-II (N) NOSE & TAIL EXPLODERED TO DRG. NO. ARM-1482 D2. R NO -2.DT. 30-06-05.
E
Nonestab
Category : ddp
Grade : Grade II
Size :
L
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) TRACK ASSEMBLY / 613.44.22CB-D1[06]()
Specification : T 72 TRACK ASSEMBLY
E
Nonestab
Category : p
Grade : Grade I
Size :
L
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FOUR TYPES OF CASTING[02]
1(a) Sand Castings/172 TY-4,GOST 977-88
1(b) Any type of Steel Castings/172 TY-5, GOST B-19184-73
2.Investment Castings/172 TY-10, GOST 977-88
3.Non Ferrous Castings/172 TY-6,GOST 1583-83, GOST 2685-75
4.Grey Iron Casting/ 172 TY-7, GOST 1412-85.()
Specification : STEEL, SPECIAL STEEL, ALUMINIUM ALLOY. GREY CAST IRON & INVESTMENT CASTINGS
R
Nonestab
Category : p
Grade : Grade I
Size :
L
1857
K.P.GARMENTS
13,14,CHURCH STREET VEERAPURAM MAIN ROAD, MORAI VILLAGE, AVADI CHENNAI Tamil Nadu
PIN1 : 600055
Phone No. : 26841166 GSTIN :
33DRAPS5038C1Z2
Specification : FABRICATION OF SHORTS PC WHITE (MODIFIED).
SWO PART II No. 60240.
SPECIFICATION NO:
1) DIMENSION: AS PER SPECN NO. IND/TC/4568(b).
2) CERTIFIED SAMPLE: AS PER APPROVED SAMPLE.
NOTE:
A) CUT COMPONENTS & GARNITURE WILL BE
E
Nonestab
Category : p
Grade : Grade III
Size :
S
1858
FIFA ENTERPRISES
ICHAPUR DAKSHINPARA SANTRAGACHI HOWRAH WEST BENGAL
PIN1 : 711104
Phone No. : 9883104034
1) P B Rod 127 MM Dai x 1 Mtr Long Or its Multiple to Spec BS 2874 1986 Designation PB 102
Description : P B Rod 127 MM Dai x 1 Mtr Long Or its Multiple to Spec BS 2874 1986 Designation PB 102()
Specification : P B Rod 127 MM Dai x 1 Mtr Long Or its Multiple to Spec BS 2874 1986 Designation PB 102
INDEX AUTO COMPONENTS PRIVATE LIMITED
OLD NO.12, NEW NO.19 KUTCHERRY ROAD MYLAPORE CHENNAI Tamil Nadu
PIN1 : 600004
Phone No. : 42088401 GSTIN :
33AAACI0885L1ZH
