1) 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP
Description : 0133030122 ERA MOUNTING PLATE ASSEMBLY TOP()
Specification : ERA MOUNTING PLATE SEEMBLY ( TOP) AS PER DRG NO. CVRDE/DV/ERA STAND/01-T & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFENER PLATES
C
Estab
2) 0133030123 ERA MOUNTING PLATE ASSY STD
Description : 0133030123 ERA MOUNTING PLATE ASSY STD()
Specification : ERA MOUNTING PLATE ASSEMBLY (STD) AS PER DRG NO. CVRDE/DV/ERA STAND/01-S & CVRDE/DV/ERA/STAND/02 WITH PLATES 1500X 2000 X 16 MM BARRIERS & STIFFERNER PLATES
1) COMPRESSOR ROTARY POWER DRIVEN 1A 220 m3 per Hr 9 point 8 kPa at 2300 rev per min to Drg No EGA 164 D Sheet I and II and other details as per Annexure A[00]()
Specification : COMPRESSOR, ROTARY POWER DRIVEN, 1A 220m3/Hr, 9.8 kPa at 2300 rev/min to CAT SECTION & CAT/PART No.63/4310-000002 and Drg.No.EGA-164/D (Sheet I & II) & other details as per Annexure Á”.
C
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) TIN FOIL FOR M-92[64]()
Specification : OFN/BMCS/M92/TIN FOIL
C
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1) Ordnance Factory Nalanda
Name
Specification
Use
Status
1) BARRIER BAG FOR M-91 AND M-92[64]()
Specification/ Drawing No.:
OFN/ BMCS/ M-91/ M-92/BARRIER BAG
Specification : STEEL ROD 16 MM DIA IN LENGTH OF 3 MTRS SPECN: BS-970, EN-24
C
Nonestab
2) STEEL BAR ROUND 28 DIA[90]()
Specification : RD. BAR 28 MM IN STD. LENGTH SPECN:IS-226
C
Nonestab
3) MS ANGLE IRON 50x50x6MM[90]()
Specification : MS ANGLE IRON 50×50×6MM THICK IN LENGTH 5100 MM AS PER IS:2062
C
Nonestab
4) MS CHANNEL 75x40x40[90]()
Specification : MS CHANNEL SZ (75×40×40)MM × 4.7 MM THICK TO SPECN IS-2062/94 (RE) CR "SK" IN STREIGHT LENGTH OF 1015 MM
C
Nonestab
5) SQ TUBE 40x40[90]()
Specification : SQ TUBE 40×40×1.6 THICK SPECN IS-4923 ERW (1) 18224.00 MTRS IN LENGTH OF 2278 MM (2) 4792.00 MTRS IN LENGTH OF 2396 MM (3) 3275.00 MTRS IN LENGTH OF 5000 MM OVERALL TOLERANCE IN LENGTH (+) NIL (-) 2 MM
C
Nonestab
6) MS SHEET 2 MM THICK[90]()
Specification : MS SHEET 2.00 MM THICK × 1250 × 2500 MM IS-1079 GR O (SK) B.C. 01.3202.0020
C
Nonestab
7) MS PLATE 10 X 1000 OR 1250 X 4500 MM[90]()
Specification : MS PLATE 10MM THICK × 1250/1500 × 5000 MM SPECN IS:2062 GR A/B
C
Nonestab
8) MS PLATE 12 MM IS 2062[90]()
Specification : MS PLATE 12 MM THICK × 1000 × 2000 MM OR STD. SIZE SPECN. IS:2062 GR "B"
R
Nonestab
9) MS PLATE 16 MM IS 2062 GR B[90]()
Specification : MS PLATE 16 MM IS-2062 GR "B" SIZE: 16MM THICK × 1250 × 2500/2800 MM LONG
C
Nonestab
10) MS PLATE 25 MM THICK[90]()
Specification : MS PLATE 25 MM THICK × STD. SIZE SPECN: IS:1079, GR ST-42
C
Nonestab
11) HR SHEET 4 MM X 1250 X 2500[90]()
Specification : HR SHEET 4.00MM ×1250×2500 IS 1079 GR "O" (SK)
C
Nonestab
12) HR SHEET 3 POINT15 MM X 1250 X 2500[90]()
Specification : HR SHEET 3.15MM THICK ×1000/1250×2500 IS 5986, Fe 330 OR IS:1079 GR. "O"
C
Nonestab
13) STEEL ROD 45 MM DIA X 150 MM LENGTH[90]()
Specification : STEEL ROD 45 MM DIA×150MM LENGTH. SPECIFICATION EN-9 BS:970.
C
Nonestab
14) MS PLATE 6 X 1250 X 4500 OR 5000 MM[90]()
Specification : MS PLATE 6MM×1250×5000/6300 MM SPECN-IS:2062 GR "B"
C
Nonestab
15) CR SHEET[90]()
Specification : CR SHEET 1.60X1250X2500 MM IS: 513 GR "D" SK
C
Nonestab
16) FLAT 40 X 25 IN STD LENGT[90]()
Specification : FLAT 40 X 25 IN STD LENGT & SR 25 IS: 2062/1992
C
Nonestab
17) MS PLATE 8 X 1400 OR 1500 X 4500 MM[90]()
Specification : MS PLATE 8 MM THICK X 1500 X 4500/5000 MM SPECN IS:2062 GR. B OR ALTERNATE IS-2062 GR. C
C
Nonestab
18) STL SHT ST V 23 1MM THICK[90]()
Specification : STL SHT ST V-23 1MM THICK
C
Nonestab
19) MS PLATE 5X1400 OR 1500X4500 OR 5000[90]()
Specification : MS PLATE 5.00 MM THICK X 1400 OR 1500 X 4500 OR 5000 MM SPECN:- IS: 2062 GR. A/B
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025
Description : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION LF 0133020025()
Specification : MILD STEEL COMMERCIAL PLATE SIZE 2790 X 1860 X 25 MM THICK TO SPECIFICATION IS-2062:2011(7th REVISION) GRADE:E250 (QUALITY A)
R
Estab
Category : p
Grade : 3
Size :
S
2024
Savvy Packaging Private Limited
Gat No 503, Gonde-Dhumala Behind Ceat Tyre Godown Nashik Maharashtra
PIN1 : 422403
Phone No. : 225326 GSTIN : 27AAECS1302G1ZT
1) C R G M STRIP FOR AK47 KF25 ITEM CODE 0710160157[90]()
Specification : C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO
R
Estab
2) C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METE
R
Estab
3) STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX
R
Estab
4) CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005[90]()
Specification : CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATE
R
Estab
5) CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015[90]()
Specification : CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-
R
Estab
6) CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001[90]()
Specification : CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX.
R
Estab
Category :
Grade : Grade III
Size :
L
2027
PREM NARAIN GUPTA & Co. (SOLE SELLING AGENT OF M/s SIDDHI PACKAGING, DAMAN)
PLOT NO. C-6, OIDC INDL. ESTATE VILL RIGANWAD DIST DAMAN Andaman and Nicobar Islands
PIN1 : 396210
Phone No. : 396210 GSTIN : 25AAJFS6721R1ZI
Specification : 1. ALTERNATE PACKING FOR AMMN. CONTAINER 40 A/L (Whole Job attached as annexure-I which contain Spacification for Alternate packaging for Ammn. Container 40 A/L & Trail directives for composite Amn Plastic Boxes and pallets)
2. ALT
R
Nonestab
Category : ddp
Grade : Grade I
Size :
M
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLASTIC MAGAZINE Assy FOR K7040[70]()
Specification : AS PER DRG OF PLASTIC MAGAZINE Assy FOR K7040
9) 9081008339 MACHINED CASTING OF BRACKET RIGHT TO DRAWING NO 4077356 CASTING DRAWING NO GCF 50 39485 REF DRG NO 4080112[90]()
Specification : MACHINED CASTING OF BRACKET RIGHT TO DRAWING NO. 4077356 & CASTING DRAWING NO. GCF/50/39485,(REF DRG NO 4080112)
C
Nonestab
10) MACHINED CASTING OF BRACKET LEFT TO DRAWING NO 4077357 CA STING DRAWING NO GCF 50 39484 REF DRG NO 4080113[90]()
Specification : MACHINED CASTING OF BRACKET LEFT TO DRAWING NO. 4077357 & CASTING DRAWING NO. GCF/50/39484(REF DRG NO. 4080113)
C
Nonestab
11) 9081008341 MACHINED CASTING OF BRACKET TO DRAWING NO 2025499 CASTING DRAWING NO GCF 50 39467 REF DRG NO 2025651[90]()
Specification : MACHINED CASTING OF BRACKET TO DRAWING NO. 2025499 & CASTING DRAWING NO. GCF/50/39467 (REF DRG NO.2025651)
C
Nonestab
12) 9081008342 MACHINED CASTING OF BRACKET TO DRAWING NO 2025500 CASTING DRAWING NO GCF 50 39490 REF DRG NO 2025460[90]()
Specification : MACHINED CASTING OF BRACKET TO DRAWING NO. 2025500 & CASTING DRAWING NO. GCF/50/39490 (REF DRG.NO.2025460)
R
Nonestab
13) 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A[90]()
Specification : 9073100008 STEEL CASTING OF PIECE WEDGE TO DRG NO GCF MN 5412 A
C
Nonestab
14) 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A[90]()
Specification : 9073100009 STEEL CASTING OF GUIDE BRACKET TO DRG NO GCF MN 5413 A
C
Nonestab
15) 9069112496 HOUSING TO DRG NO BOF 3012784[90]()
Specification : 9069112496 HOUSING TO DRG.NO.BOF-3012784
C
Nonestab
16) 9081008305 WHEEL CHOCK TO DRG NO GCF 50 41092[90]()
Specification : WHEEL CHOCK TO DRG. NO. GCF/50/41092
C
Nonestab
17) 9081005873 MODIFIED BARREL CLEANING APPARATUS 155 MM GUN SYSTEM TO DRG NO GCF 50 41091[90]()
Specification : MODIFIED BARREL CLEANING APPARATUS (155 MM GUN SYSTEM) TO DRG NO.GCF/50/41091.
C
Nonestab
18) 9077100048 COVER LR CR MR CR TO DRG NO NASK 939 22 FRP GLASS RED COLOUR[90]()
Specification : 9077100048 COVER LR CR & MR CR TO DRG.NO.NASK 939/22(FRP GLASS RED COLOUR)
C
Nonestab
19) 9070100092 FRONT AXLE ASSY IAN 39A[90]()
Specification : 9070100092 FRONT AXLE ASSY. IAN 39A
C
Nonestab
20) COMPLETE MACHINING OF TRUNION BLOCK TO DRG NO V548 0136 1000 FORGING WILL BE SUPPLIED BY GCF TO DRG NO GCF MN 5402 D[90]()
Specification : COMPLETE MACHINING OF TRUNION BLOCK TO DRG NO. V548 0136 1000 (FORGING WILL BE SUPPLIED BY GCF TO DRG NO GCF MN-5402 (D)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]()
Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 1000 LBS MK-II(N) HE (N&T) EMP (9911357491)[99]()
Specification : EMPTY ASSY.BOMB HE A/C M.C. 1000 LBS ( 450 KG ) MK-II (N) NOSE & TAIL EXPLODERED TO DRG. NO. ARM-1482 D2. R NO -2.DT. 30-06-05.
C
Nonestab
Category : dp
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOX C-235(STEEL) FOR BOMB 25 LBS[65]()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.1A-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOMB 450 KG HSLD EMPTY ASSY ARDE-2122 (9911354403)[99]()
Specification : HIGH SPEED LOW DRAG , 450 KG MC/HE, A/C BOMB EMPTY ASSEMBLY TO DRG NO ARDE-2122 DETAIL-1, 2SHEET- SHEET NO.1 R.NO.1DT.7-3-91 & 2 DT.11-04-07. SHEET NO 2 R.1 DT.7-3-91 & 2 DT13-4-07.
C
Estab
2) BOMB 250 KG HSLD, ARDE-9501-01/1 EMPTY (9911356459)[99]()
Specification : BOMB 250 KG HSLD EMPTY ASSEMBLY TO DRG NO. ARDE-9501-01 (DET.NO-1) ASSEMBLED WITH ROLLING RING ASSY TO DRG. NO. ARDE-9501-01 (DET NO.18) ON THE BOMB.
C
Nonestab
Category : dp
Grade : 3
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]()
Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) Fabrication of SD Para Pack Cover[2110025032]()
Specification : Fabrication of SD Para Pack Cover is as per Specn. No. IND/TC/2694 with amendment 1, 2 & 3
R
Nonestab
2) Fabrication of Para 105 mm[2110025040]()
Specification : As per Drawing/Tech Particulars attached.
R
Nonestab
3) FABRICATION OF PARA 81 MM[2110025058]()
Specification : Drg. No. ADRDE/1112
R
Nonestab
4) Fabrication of Line Static 610 Cm[2110025071]()
Specification : IND/TC-2548(b)
R
Nonestab
5) Fabrication of Para Drogue Para 155 mm[2110025070]()
Specification : Latest drawing of Para 155 mm Naschern & drogue Para with gore 155mm received vide' Ordnance Factory Dehu Road A unit of Munitions India Ltd. PUNE letter No 3241/OFDR/MCO/155 mm dtd 18.10.2021
Drogue Parachute:- Assy. Drg. 2440A20014,
R
Nonestab
6) Fabrication of main Para 155 mm[2110025069]()
Specification : Latest drawing of Para 155 mm Naschern & drogue Para with gore 155mm received vide Ordnance Factory Dehu Road A unit of Munitions India Ltd. PUNE letter No 3241/OFDR/MCO/155 mm dtd 18.10.2021 Parachute:- Assy. Drg. 2440 A 13032
Designer
R
Nonestab
7) FABRICATION OF PARA 51 MM[2110025067]()
Specification : SPECN. No. ADRDE/553(d)
R
Nonestab
8) Fabrication of Para 84 mm[2110025068]()
Specification : ADRDE/543(b)
R
Nonestab
9) Fabrication of Sub assembly of Man Carrying Parachute[2110025110]()
Specification : Fabrication of Sub assembly of Man Carrying Parachute as per OPF Drg No. 22-14R45/ABHC/1A(5)
E
Nonestab
10) Fabrication of Sub Assemblies of Parachute As per OPF Drg No GA 16 20 1 13[2110025116]()
Specification : As per OPF Drg.
No. GA-16-20-1-13
E
Nonestab
11) Fabrication of Sub Assemblies of Parachute As per OPF Drg No GA 16 20 1 18[2110025117]()
Specification : As per OPF Drg.
No. GA-16-20-1-18
E
Nonestab
12) Fabrication of Sub Assemblies of Parachute As per OPF Drg No GA 14R45 ABHC 6[2110025115]()
Specification : As per OPF Drg.No. GA-14R45/ABHC(6)
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) Fabrication of Bag Parachutist[2110025039]()
Specification : As per Drawing/Tech Particulars attached.
Drawing No.CIT&C/TC-8/39
R
Nonestab
2) FABRICATION OF CARRYING BAG BP SU 30[2110025041]()
Specification : AS PER DRG. NO. ADRDE/1402-09(c)
R
Nonestab
3) Fabrication of Sub Assemblies of Parachute[2110025114]()
Specification : As per OPF Drg.No. GA-8-4-1-14-CB
E
Nonestab
4) Fabrication of Sub Assemblies of Parachute As per OPF Drg No A F 0A 00[2110025118]()
Specification : OPF Drg No A F 0A 00
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9070056721 T PANNING RB TO DRG GCF 20A SK 876[90]()
Specification : 9070056721 T PANNING RB TO DRG GCF 20A SK 876
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) 9070056723 M A RA ROD T 90 TO GCF 20A SK 872[90]()
Specification : 9070056723 M A RA ROD T 90 TO GCF 20A SK 872
1) WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF WIRE NO 1 TO DRG NO FS 2800 B 2 CONNECTOR PIN TO DRG NO FS 2802A AND 3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B[67]()
Specification : WIRE NO 1 ASSY TO OFAJ DRG NO FS 2905 CONSISTING OF
1 WIRE NO 1 TO DRG NO FS 2800 B
2 CONNECTOR PIN TO DRG NO FS 2802A AND
3 HEAT SHRINKABLE TUBING DRG NO FS 2801 B
Specification : AMMUNITION CONTAINER BOX C 51-A (STEEL) FOR PACKING OF 125 MM HE TO DRG.PT.NO.ISV-572-A,DC NO.37051-A, DT.05.05.2006.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6273200053 GRUMMET ASSLY FOR SHELL 155MM ERFB[62]()
Specification : GRUMMET ASSEMBLY TO DES. REF.NO. 04-13-2452-148,DC 36940-A DT.29/12/2003,CONSISTING OF : (A) GRUMMET 155 MM (B) SPLIT PIN ASSEMBLY (C) RING FOR SHELL 155 MM HE ERFB (BT & BB)
C
Nonestab
2) 6273200026 OBTURATOR TO DRG NO CQA 155 1140[62]()
Specification : OBTURATOR TO CQA DESIGN.REF.155-1140, DC 37025-A DT.08/08/05 FOR THE ASSLY OF SHELL 155 MM HE ERFB M1A4 (BT)/(BB).
1) 6581233026 END CAP FOR CONTAINER 40A TO DRG PT NO ISV 1123 SHEET STRIP TO SPECN NO IS 1079 2017 OR IS 513 2008 OR BS 1449 PT 381968 CS4 OR BS 1449 PT 3A 1964 HS4A[65]()
Specification : END CAP FOR CONTAINER 40A TO DRG.PT.NO.ISV 1123 SHEET/STRIP TO SPECN. NO.IS 1079:2017 OR IS 513:2008 OR BS 1449 PT 381968-CS4 OR BS 1449 PT 3A-1964-HS4A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TWIN CONTAINER 520:9 DRG TRD 422155[99]()
Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM SPECN F1301-905060-P[99]()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CARRIER 11A ISV 468A FOR HE AND ILLU 6573810100[65]()
Specification : CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG. PT. NO. ISV-468-ADC-37090-A DT 27-01-07 TO SPECN:CQA(A)-2804(m) DC-36202-ADT 7/11/96.NOTE.1:- SPECIAL INSTRUCTION FOR TEST FOR CARRIER AMMN.11AIS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 10 NOS.ARE REQUIR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) carrier 12 A[65]()
Specification : CARRIER, AMMUNITION 12-A (PLASTIC) TO DRG. PT. NO. ISV-470-ADC 36999-A DT.02-02-05 WITH SHOCK ABSORBER ASSEMBLY "B" DRG.PT. NO. ISV-147-SA DC-35855-A DT. 23.11.94, SPECN:- CQA(A)2804 (m) DC-36202-A DT 7/11/96.NOTE 1:-SPECIAL INSTRUCTION F
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CONTAINER PLASTIC P 17D 23MM PPL LF 9911356890[99]()
Specification : PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM SPECN F1301 905060 P LF 9911350158[99]()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
C
Nonestab
2) CAP AND LOCK BOTTOM F1301 905060 P 2013998518[20]()
Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.
R
Nonestab
4) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519[99]()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
C
Nonestab
5) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
Name
Specification
Use
Status
1) GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT[62]()
Specification : GRUMMET ASSY CONSISTING OF (1)GRUMMET 155MM (2) RING (3) PIN ASSEMBLY FOR SHELL 155MM ERFB/BB & BT TO DESIGNER'S REF.NO:04-13-2452-148. (REF.OFBL DRG.NO: BL/PB/U-5/343)..
C
Nonestab
2) AMMUNITION CONTAINER 69A/L, PLASTIC[14]()
Specification : AMMUNITION CONTAINER 69A/L, PLASTIC TO DRG. NO.ARDE-2125, DET NO.3 PART NO.ISV 533 A, DC 36469-A SPECN NO.CQA(A) 2804(m) DC 36202-A. PACKING PLYWOOD/CORRUGATED BOXES DULY TAPE BANDED (MAX. 50 CONT. PER BOX).
C
Nonestab
3) CONTAINER 38B DRG.NO-CIA/AMN/2008[14]()
Specification : CONTAINER 38B DRG.NO-CIA/AMN/2008 & DRG. PT.NO-ISV-464-A,DC-36787-A,DT.15.10.01, CONSISTING OF (1).BODY DRG.PART NO-ISV-1557,DC-36177-A,DT.28.09.96 (2) LID TO DRG.PART NO ISV-1558,DC-36177-A,DT:28.09.96.(3) RING-A DRG.PART NO.ISV-1559
C
Nonestab
4) FUZE ANTIREMOVAL MINE AT 2B ND EMPTY[61]()
Specification : FUZE ANTIREMOVAL MINE AT 2B ND EMPTY TO DRG.NO.ARDE-1553 DET NO.1 DRG PT NO.IQX-48 GE DC NO.35703-A DT.03.05.94 TO SPECN.CQA (A) 1825 (C) DC 36823-A DT.20.03.02.
C
Nonestab
5) MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A[61]()
Specification : MINE A/T 4D ND (EMPTY ASSEMBLY) TO DRG.PT NO.ITX-46A AND SPECN.CQA(A) 1817(t) DC NO.37096-A,DT.06.03.07.[REFER SUB ASSY DRG. BODY MINE ITX-347,END CAP ITX 344,PLUG CLOSING BOTTOM ITX 340,PLUG CLOSING END CAP ITX 341 HOUSING FUZE ANTI REMO
C
Nonestab
6) FUZE MINE A/T 4A ND(EMPTY ASSEMBLY)[61]()
Specification : FUZE MINE A/T 4A ND(EMPTY ASSEMBLY) TO DRG PT NO.IQX-75 GE DC NO.35879-A DT.20.12.94 TO SPECN. NO.CQA(A) 1819(g) DC 36823-A DT.20.03.2002. [REFER SUB ASSY DRGS (1) FUZE MINE A/T 4A ND(EMPTY SUB ASSY) TO IQX 86A DC NO.35879-A DT.20.12.
C
Nonestab
7) AMMN.CONTAINER 47 B[14]()
Specification : AMMN.CONTAINER 47 B FOR FUZE 117 MK -20 ISV-515A DC.36647.A Dt.12.07.2013
C
Nonestab
8) OBTURATOR[62]()
Specification : OBTURATOR TO DESIGNER REF.NO.155- 1140,DC NO.37025-A,DT.08.08.2005.
C
Nonestab
9) CONTAINER TO ARDE-1933, DET-4,PT.NO.[14]()
Specification : CONTAINER TO ARDE-1933, DET-4,PT.NO. ITV 170, DC NO.36207-A, DT.02-12-96 SPECN. CQA(A)-2322(g) DC 37193-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE MINE COMB M605 ASSEMBLY EMPTY[63]()
Specification : CQA(A) 1803
C
Nonestab
2) 6573020501 AMMUNITION CONTAINER NO 6717 AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3[65]()
Specification : AS PER DRAWING NO AFK DEV 239 SHEET NO 1 2 AND3
C
Nonestab
3) 6099999131 SET OF COMPONENTS FOR 30MM VOG 17M[60]()
Specification : 6099999131 SET OF COMPONENTS FOR 30MM VOG-17M
1) FILLING PLUG MCD 450 KG L F NO 6230400504[62]()
Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
2) NOSE PLUG ARM 1049B 1000 LBS L F NO 6220901044[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED].
C
Nonestab
3) NOSE PLUG W O PHOSPHATED 250 KG L F NO 6240900504[62]()
Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED)[DRG. ENCLOSED]
C
Nonestab
4) NOSE PLUG MCD ARDE 2122 450 K L F NO 6230900504[62]()
Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7.[DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
5) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]()
Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED].
C
Nonestab
6) RING NUT ARM 1172 B 4 MCD FOR 1000 LBS L F NO 6220900900[62]()
Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED].
C
Nonestab
7) R NUT MCD W O SUR 250 KG BOMB L F NO 6240900904[62]()
Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB.
C
Nonestab
8) RING NUT MCD 450 KG L F NO 6230900904[62]()
Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. [DRG. ENCLOSED]. [W/O SURFACE TREATED].
C
Nonestab
9) BASE TRANSIT MCD 1000 LBS L F NO 6220901004[62]()
Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 [W/O SURFACE TREATMENT]. [DRG. ENCLOSED].
C
Nonestab
10) BASE TRANSIT MCD W O SUR 250 KG L F NO 6240900104[62]()
Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB
C
Nonestab
11) BASE TRANSIT MCD 450 KG L F NO 6230901004[62]()
Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED]
C
Nonestab
12) CONTAINER EXPLODER 1000 LBS L F NO 6224121300[62]()
Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED]
C
Nonestab
13) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]()
Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.
C
Nonestab
14) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]()
Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) TRACK LINK DRG NO 172 55 012 TRACK T 90 ITEM CODE 6120100128[61]()
Specification : TRACK LINK TO DRAWING NO. 172.55.012.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRAWING NO 172.55.012/F(HVF)AND TECHNICAL REQUIREMENTS GOST 4543-71, GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S
C
Nonestab
2) CLAMP TO DRG NO 172 55 025 TRACK T 90 ITEM CODE NO 6120100130[61]()
Specification : CLAMP TO DRG.NO. 172.55.025{CQA(HV)}. COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.025/F (HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS SHEETS
C
Nonestab
3) SHOE TO DRG NO 219 35 126 TRACK T 90 ITEM CODE 6120100196[61]()
Specification : "SHOE" TO DRAWING NO. 219.35.126.{CQA(HV)}.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRA.NO.219.35.12 6/F(HVF),AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70,GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS S
C
Nonestab
4) GUIDE TO DRG NO 172 55 013 TRACK T 90 ITEM CODE 6120100197[61]()
Specification : ["TRACK GUIDE" TO DRG. NO.172.55.013.{CQA{HV)}COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER DRG.NO.172.55.01 3/F(HVF)AND TECHNICAL REQUIREMENTS AS PER GOST 4543-71,GOST 8479-70.GOST 7505-89,GOST 10243-75,GOST 1778-70.PROCESS
C
Nonestab
5) T A BOLT M27 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100256[61]()
Specification : ["T.A.BOLT (M27 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.219.35.158 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING". BOLTS SHOULD BE FREE FROM ANY FORGING SCALES
C
Nonestab
6) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]()
Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES.
C
Nonestab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FILLING PLUG MACHINED LF NO 6250700174[62]()
Specification : FILLING PLUG (MACHINED). AS PER DRAWING ARM 1172B5 (R.NO. 4, DATED 25/04/89)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) CONTAINER EXPLODER MCD 450 KG L F NO 6230701104[62]()
Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG.NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG SUSPENSION NO 318 Item code 6250700175[62]()
Specification : LUG SUSPENSION NO. 318 (MACHINED) AS PER DRAWING NUMBER ARM 1302C5 (R.NO.4, DATED 09/02/2023)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) LUG SUSPENSION NO 243 AND THRUSTER PLATE MACHINED L F NO 6250700173[62]()
Specification : LUG SUSPENSION NO. 243 AND THRUSTER PLATE (MACHINED). AS PER DRAWING NUMBER ARM 1461D. (R. NO. 2, DATED 05/10/01)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS.,
C
Nonestab
2) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
