1) Outer and Inner Shell Nylon Fabric Inner Jacket Nylon 60g width 150 cm Min[21]()
Specification : As per Appendix 'E' of Provisional Specification No. S/3558/A/TC-15/Coat ECC.
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric Polyester white wind cheater 115g Width 150 cm Min[21]()
Specification : As per Appendix 'A' of Provisional Specification No. S/3558/A/TC-15/Coat ECC.
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Three Layer WP Breathable Fabric Dual Shade OG White 118 cm width[21]()
Specification : Three Layer Waterproof Breathable Fabric Dual Shade OG/White 118 cm width
Specification:- As per Appendix "A" of Prov. Specification No. IND/TC/4587(d) and amendment no. 1
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric nylon 75gsm Un-dyed 91cm[21]()
Specification : ADRDE/SPEC/1980/5(a) & Annexure A
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRIC NYLON 220 GSM WHITE WATER & OIL REPELLENT 100 CM[21]()
Specification : IND/TC/0160 AS PER RELEVANT CLAUSE OF SPECIFICATION
Specification : Fab. of Trousers Wind Cheater. As per Specification No. IND/TC/4678
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) TAPE TAFFETA SILK WHITE 25 MM[21]()
Specification : BEST TRADE QUALITY
R
Estab
2) FABRIC NYLON 300 GSM RIPSTOP PU COATED F R 152 CMS WIDE[21]()
Specification : FABRIC NYLON 300 GSM RIPSTOP PU COATED F. R. 152 CMS WIDE
SPECN. - IND/TC/0155 AND AS PER ANNEXURE 'A' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL (OG)/TC-6 (a)
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Fabric Nylon 75 GSM White PU Coated 152cms Minimum[21]()
Specification : Fabric Nylon 75 GSM White PU Coated 152cms Minimum
Specification:-IND/TC/0157, "Firm Trade Mark in Abbreviated form in smallest possible letter to be printed on the uncoated side of the fabric along selvedge at an interval of one mete
R
Estab
2) 100 Percent Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm min[21]()
Specification : 100% Nylon PU coated water proof and wind proof breathable plain weave fabric 100 GSM OG width 150 cm (min.)
Specn:- Appendix "A" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
R
Estab
3) FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN[21]()
Specification : FABRIC NYLON POLYURETHANE COATED 105 GSM SNOW WHITE WIDTH 100 CM MIN.
SPECIFICATION:- JSS 8305-32-2003
Specification : Cloth Drill Cotton Disruptive Pattern 142cm Minimum Width to be used in Smoke Denison
Specification:- PROV/S/4112/TC-11/2009-05. As per schedule no. CIT&C/PMS/36(d). As per CQA(T&C)Kanpur QAI No. CQA(T&C)/QAI/99 TC-11
Specification : 100% POLYESTER MICROFILAMENT WOVEN FABRIC JUNGLE GREEN 70 GSM WIDTH 150CM MIN.
APPENDIX 'B' OF PROVISIONAL SPECIFICATION NO. OCFS/039/JACKET ECC TWO LAYER
R
Estab
6) 100 Percent Nylon micro filament woven fabric olive green 50 GSM width 150 cm min[21]()
Specification : 100% Nylon micro filament woven Rip stop fabric olive green 50 GSM width 150 cm (min.)
Specn:- Appendix "C" of Provisional Specification No. OCFS/039/Jacket ECC Two Layer
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Clothing Factory Shahjahanpur
Debarred
Name
Specification
Use
Status
1) FABRIC NYLON 75 GSM WHITE PU COATED 152 CMS (MINIMUM)[21]()
Specification : IND/TC/0157 FIRM TRADE MARK IN ABBREVIATED FORM IN SMALLEST POSSIBLE LETTER TO BE PRINTED ON THE UNCOATED SIDE OF THE FABRIC ALONGSELVEDGE AT AN INTERVAL OF ONE METER. THE HEIGHT OF LETTERSHOULD NOT EXCEED 8MM. DARK/BRIGHT COLOUR TO BE AVO
Specification : IND/TC/4587 (C) and Approved sample
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) COMPLETE SUB ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP VER WITH ALL INPUT MATERIAL AND FABRICATION OF WIND CHEATER[21]()
Specification : COMPLETE SUB-ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP. VER. (WITH ALL INPUT MATERIAL) AND FABRICATION OF WIND CHEATER
AS PER COAT ECC IMP. VER. SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 AND AS PER ANN
E
Estab
2) FABRICATION OF COAT ECC IMP VER[21]()
Specification : FABRICATION OF COAT ECC IMP VER
FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C
E
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FABRICATION OF PONCHO GLACIER[21]()
Specification : FABRICATION OF PONCHO GLACIER
SPECIFICATION:- FABRICATION (200008-TAILOR SKILLED HAND-I, 200002-TAILOR SKILLED MACHINE-I, 200001-TAILOR SKILLED MACHINE-II, 200015-SERGING & 200018-SNAP FASTENING) OF PONCHO GLACIER AS PER SPECIFICATION.-I
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) TRADE FABRICATION OF BAG KIT UNIVERSAL WITH PV DOPE DYED FABRIC OG[21]()
Specification : FABRICATION OF BAG KIT TO BE CARRIED ON AS PER SPECN. NO.
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) TRADE FABRICATION OF PACK WITH ALUMINIUM FRAME MODIFIED[21]()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Nonestab
5) TRADE FABRICATION OF NET MOSQUITO R/M POLY KHAKI WITH CALICO BORDER[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Nonestab
6) FABRICATION OF BELT ICK BLACK A/F[21]()
Specification : AS PER REQUIREMENT & SPECIFICATIONÂÂ
R
Nonestab
7) FABRICATION OF LINER INNER FOR TEFS 2M UNIT[21]()
Specification : AS PER REQUIREMENT & SPECIFICATIONÂÂ
R
Nonestab
8) TRADE FABRICATION OF RAIN JACKET WITH INTEGRATED HOOD AND TROUSER; SIZE- LARGE[21]()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Nonestab
9) TRADE FABRICATION OF BAG KIT UNIVERSAL WITH PV DOPE DYED FABRIC OG[21]()
Specification : FABRICATION OF BAG KIT TO BE CARRIED ON AS PER SPECN. NO.
R
Nonestab
10) FABRICATION OF HAVERSACK (MODIFIED)[21]()
Specification : Prov.IND/TC/1550 (7202/PK dt.21/09/2013) AND ATTACHED RELEVE
R
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) SUB ASSEMBLY OF WIND CHEATER FABRICATION WITH ALL INPUT MATERIAL FABRIC AND GARNITURE MATERIAL EXCEPT PLASTIC SLIDE FASTENERS[21]()
Specification : Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with a
E
Estab
Category :
Grade : Grade III
Size :
S
2203
Avi Oilless Die Components India Pvt Ltd
Gat No 697, 734 & 735 At Post Velu Taluka Bhor Pune Maharashtra
PIN1 : 412205
Phone No. : 253446 GSTIN :
27AAECA7012K1ZR
1) 0725577121 PB HOLLOW BAR 135MM OD X 95MM ID IS 28 1985 GRADE 2 CONTINUOUS CAST[70]()
Specification : 0725577121 PB HOLLOW BAR 135MM O/D X 95MM I/D IS:28-1985 GRADE 2 CONTINUOUS CAST
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 0725177160 PB HOLLOW BAR 160 MM[90]()
Specification : PB HOLLOW BAR O/S DIA 160 MM X I/D DIA 110 MM TO SPECN. IS:28-1985 GRADE 2
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) AL BRONZE ROUND BAR 70 MM DIA x 500 MM LONG[90]()
Specification : AL.BRONZE ROUND BAR 70 MM DIA X 500 MM LONG
C
Nonestab
2) AL BRONZE ROUND BAR 75 MM DIA X 500 MM LONG[90]()
Specification : AL BRONZE ROUND BAR 75 MM DIA X 500 MM LONG
C
Nonestab
3) PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003[90]()
Specification : PHOSPHOR BRONZE CASTING TO SPECN BS 1400 Pb 4 GROUP A FOR LINER TO DRG NO GCF MN 5216 C REF DRG NO V54801361003
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) CASTING OF FRONT BUSH 2A46M 109 40[90]()
Specification : CASTING OF FRONT BUSH 2A46M 109 40
C
Nonestab
Category :
Grade : Grade III
Size :
S
2204
INDUSTRIAL TUBES MANUFACTURERS PVT. LTD.
DCM ROAD HEAVY INDUSTRIES AREA HEAVY INDUSTRIES AREA KOTA Rajasthan
PIN1 : 324003
Phone No. : 2690022 GSTIN :
08AAACI2822H1ZU
1) OBTURATING COPPER BAND 149mm plus 0point 7 MM OD X 13 mm 2 mm WALL THICK X STANDARD LENGTH TO SPECN IS 2501 72 FRTP 1 ANNEALED WITH OXYGEN 0 point 07 percent MAX AND UTS 20 KG per mm MIN[07]()
Specification : OBTURATING COPPER BAND 149mm +0.7 MM O/DX 13 mm +2.00 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
R
Nonestab
2) OBTURATING COPPER BAND 143mm plus 0point6 mm OD X 10 mm plus 0point75 mm WALL THICK X STANDARD LENGTH TO SPECN IS 2501 72 FRTP 1 ANNEALED WITH OXYGEN 0point 07 percent MAX AND UTS 20 KGpermm MIN[07]()
Specification : OBTURATING COPPER BAND 143mm +0.6 MM O/D X 10 mm +0.75 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)
Specification : SET OF 5 COMPONENTS FOR IGNITER PINAKA MK-II GUIDED DRG. NO. HEMRL/IGN/PIN MK-II/24 (1) CANISTER DET NO.3 (2) SQUIB HOLDER DET NO.4 (3) IGNITER CLOSURE DET.NO.11 (4) 'O' RING DET NO.13 (5) RETAINER DISC DET NO.14
R
Nonestab
Category :
Grade : Grade III
Size :
S
2209
renuka machine tools
shop no 2-142 road no 6 shobhana colony balanagar road no 6 hyderabad Telangana
PIN1 : 500042
Phone No. : 9966880999 GSTIN :
36acupc2180m1z8
Specification : Hydraulic System for 155MM 52 Cal Mounted Gun System
C
Nonestab
Category : ddp
Grade : Grade I
Size :
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) SET OF 8 TUBES FOR DHANUSH GUN
Description : SET OF 8 TUBES FOR DHANUSH GUN()
Specification : SET OF 8 TUBES FOR DHANUSH GUN CONSISTING OF DRG.NO.1134013
(ASSY DRG 5162892)(QTY.1NO),1134012(ASSY DRG NO-5162890),QTY
-1 NO),TUBE MATERIAL SS304,MAKE-PARKER/SWAGLOK,FITTING MAKE-
PARKER/VOSS,DRAWING
C
Estab
Category : ddp
Grade : 2
Size :
L
1Gun Carriage Factory
[ENR Registration]
Name
Specification
Use
Status
1) HAND PUMP WITH ASSY 1153918D TO DRG NO GCF 50 40159
Description : HAND PUMP WITH ASSY 1153918D TO DRG NO GCF 50 40159()
Specification : HAND PUMP WITH ASSY. 1153918D TO DRG. NO. GCF/50/40159
Specification : MEMORY UNIT TO DRG NO. 172.74.001CB-3
C
Nonestab
Category :
Grade : Grade III
Size :
S
2213
SREE MAA TECHNO ENTERPRISE
88/2, BANERJEE PARA LANE KOLKATA-700031 BANERJEE PARA LANE KOLKATA West Bengal
PIN1 : 700031
Phone No. : 9836674059 GSTIN :
19AFYPC2778Q1ZA
1) PLATE TO DET No 2 8 OF DRG NO SK NO OTF DD 016[62]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) BUSH TO SK NO OTF DD 013 IN FC[62]()
Specification : AS PER DRG
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) NUT TO DET NO 2 16 OF DRG NO 3 024045 IN FC TO SK NO OTF DD 006[64]()
Specification : NUT TO DET NO 2-16 OF DRG NO 3-024045 IN FINISH CONDITION TO SK NO OTF/DD/006
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) BODY SUB ASSY DET Cd 3 TO DRG NO 3 022859 TO SK NO OTF SE 010 IN F C[62]()
Specification : AS PER DRG. & SPECIFICATION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) NYLON MOULDED POLE IN F/C TO DRG. NO. QX-1743 DC(I) NO. 36123-A DT.06/06/96[63]()
Specification : AS PER DRG & SPECIFICATION
C
Nonestab
2) SLEEVE TO SK NO OTF PG 006[62]()
Specification : AS PER DRG.
C
Nonestab
3) TRANSIT PLUG AS PER SK NO M 7949[62]()
Specification : AS PER DRG.
C
Nonestab
4) MACHINING AND PROCESSING OF CONTACT CAP TO DET NO 7 OF DRG NO 3 022859 IN FC OTF SE 005[91]()
Specification : MACHINING AND PROCESSING OF CONTACT CAP TO DET. NO.7 OF DRG.NO.3-022859 IN F/C (TO SK NO. OTF/SE/005)
P
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) CAP DET NO 21 TO SK NO OTF DD 001 IN FC[62]()
Specification : AS PER DRG.
C
Nonestab
2) NUT IN FC TO SK NO OTF PG 003[64]()
Specification : AS PER DRG
C
Nonestab
3) CAP TO SK NO OTF PG 002 IN FC[62]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) O RING 67point5 X 2point4 lf 2013436145
Description : O RING 67point5 X 2point4 lf 2013436145()
Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE
R
Nonestab
Category : p
Grade : 3
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) Magazine to Part No IQX 12 for Fuze 162 Mk 8 Mk 9[63]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) HEAD FLASH IGNITER TO DRG NO IQX 306 IN FC FOR FMC DC NO 35573 A DT 02 09 93[63]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
2214
PORWAL AUTO COMPONENTS LTD
PLOT NO 209 , 215, SECTOR-1 INDUSTRIAL AREA PITHAMPUR Madhya Pradesh
PIN1 : 454775
Phone No. : 403608 GSTIN :
23AABCP0411E1ZB
1) CAST STEEL EMPTY BODY MACHINED AS PER ANNEXURE A ITEM CODE 4215990739[42]()
Specification : CAST STEEL EMPTY BODY (MACHINED) AS PER ANNEXURE-A AND AS PER DRG. NO.OFM 33056
C
Nonestab
Category :
Grade : Grade III
Size :
M
2215
SPECIAL SPRING INDIA PRIVATE LIMITED
G-1042, DSIDC INDUSTRIAL PARK, NARELA, North West Delhi,
Delhi, 110040 NARELA NORTH WEST DELHI Delhi
PIN1 : 110040
Phone No. : 9654407051 GSTIN :
07AAGCS2036R1ZX
1) PNEUMATIC BELT FEED BOOSTER AK 630M ASSY 02[72]()
Specification : PNEUMATIC BELT FEED BOOSTER AK-630M ASSY 02
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) PNEUMATIC GROUP AK-630 ASSY 114[72]()
Specification : AS PER DRG. AND SPECN.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270[91]()
Specification : Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PISTON ROD TO DRG.NO. 4024497[90]()
Specification : PISTON ROD TO DRG.NO. 4024497
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PISTON ROD TO DRG.NO. 4024497[90]()
Specification : PISTON ROD TO DRG.NO. 4024497
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) PISTON ROD TO DRG NO 4024497[90]()
Specification : PISTON ROD TO DRG.NO.4024497.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) ELECTROMAGNETIC ACTUATOR SUB ASSY BIPOLAR ASSY 40 MM AA GUN L 70 HYDRAULIC AMPLIFIER CONTROL SYSTEM TO CAT PT NO 1010 002680 DRG NO BOF 4031731[90]()
Specification : ELECTROMAGNETIC ACTUATOR SUB ASSY:BIPOLAR ASSY,
40 MM AA GUN, L-70, HYDRAULIC AMPLIFIER CONTROL SYSTEM
TO CAT/PT.NO.1010-002680,DRG.NO.BOF-4031731.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) LEVELING JACK ASSY. TO DRG. NO. IAN-8MA[90]()
Specification : LEVELING JACK ASSY. TO DRG. NO. IAN-8MA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9070100092 FRONT AXLE ASSY IAN 39A[90]()
Specification : 9070100092 FRONT AXLE ASSY. IAN 39A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) REAR AXLE ASSEMBLY TO DRG NO 2011598 FOR 40 MM A AGUN L 70[90]()
Specification : REAR AXLE ASSEMBLY TO DRG. NO. 2011598 FOR 40 MM A.A. GUN
L/70
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) TRAVERSING NUT TO DRG 5310 001835[90]()
Specification : TRAVERSING NUT TO DRG. 5310 001835
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9069111475 RECOIL BUFFER ASSY IN FINISHED CONDITION TO DRG NO IAN 29A 3019990[90]()
Specification : RECOIL BUFFER ASSY IN FINISHED CONDITION TO DRG NO IAN 29A 3019990
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9069112386 ROD PISTON FOR BUFFER DRG IAN 47SA[90]()
Specification : 9069112386 ROD PISTON(FOR BUFFER)DRG.IAN-47SA
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) ADAPTER NOSE MOR BOMB NO.1 MK 1[60]()
Specification : CQA(A) 2351
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) PLUG REPRESENTING FUZE FOR 40MM LOW[60]()
Specification : PLUG REPRESENTING FUZE FOR 40MM LOW VELOCITY AMMN. TO DRG. NO. ODC/AFK-120-18
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]()
1) FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)[04]()
Specification : FERRO-CHROME ( LC ) GRADE 9 TO SPECN - IS: 1170-1992,GR. DESIGNATION 008 F.e Cr. 64 (TO BE SUPPLIED IN SIZE BETWEEN 25 MM TO 100 MM)
R
Estab
2) FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY WITH A CERTIF[04]()
Specification : FERRO SILICON TO SPECN. IS:1110-1990. GRADE Fe Si 73 A 115.CHEM.COMP.- Si%: 70-75,C%:0.15 Max;S%:0.050 Max;P%:0.050Max;Al%:1.50 Max. PARTICLE SIZE: 40-150 MM IN THE FORM OF LUMP,OTHER DETAILS AS PER SPECIFICATION.SUPPLY SHOULD ACCOMPANY W
R
Nonestab
3) FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,][04]()
Specification : FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,]
R
Estab
4) FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE SUPPLYING MA[04]()
Specification : FERRO VANADIUM.TO SPECN.IS: 1466-1985,(Reaffirmed in 1996),GRADE-Fe V 55, (LC)(MATERIAL TO BE SUPPLIED IN SIZE BETWEEN 25MM TO 50MM).FIRM'S TEST CERTIFICATE FROM NABL ACCREDED LABY/GOVT.RECOGNISED LABY;AS PER SPECN.MUST BE ATTACHED WHILE
R
Nonestab
5) FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVERSIZE: 10% M[04]()
Specification : FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVE
R
Estab
6) FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%Max,Over size[04]()
Specification : FERRO MOLYBDENUM TO SPECN IS:1469-1993,GR:Fe-Mo 63,C-10;CHEMCOMP.=Mo%:60-65,C%:0.10Mx,Si%:2.0Max,S%:0.08Max,P%:0.06MaxCu%:0.50Max,Al%:0.50Max,Pb%:0.01Max,Sn%:0.03Max.PARTICLE SIZE:Over 25 mm Upto and including 50 mm,Under size by mass:5%M
