OFB Vendor Panel

Warning!

You need to have JavaScript enabled to use this site.

List of registered vendors

Search

Reset

Sort by

Name, Address & Phone No.

Vendor Code

Factory

Products

Category, Grading, Size

1881

VISVESVARAYA IRON &STEEL PLANT,
407, BHIKAJI CAMA BHAWAN, 11-BHIKAJI CAMA PLACE, DELHI DELHI
PIN1 : 110066
Phone No. : 8282-271620
GSTIN : 21AAACS7062F2ZP

AAACS7062F

Download

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) STEEL RD 45MM DIA IN HR AND NORMALISED CONDITION Description : STEEL RD 45MM DIA IN HR AND NORMALISED CONDITION()	Specification : SPECN.BS:970PT -3:1991.GD.070M55.TEST PIECE TO BETESTED AS PER SPECN.MATL. SHOULD ALSO SATISFY THE TEST AS PER ANNX."C".A SEPERATE TEST PIECES IS TO BE QUENCHED * TEMPERED TO ACHIEVE HARDNESS40-45 HRC. (REQD.FOR-BARREL LOCKING NUT )	R	Estab

Category : p
Grade : 1
Size : L

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) STEEL ROD 32MM DIA Description : STEEL ROD 32MM DIA()	Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015M X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELMENT AL.	R	Estab

Category : p
Grade : 1
Size : L

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) ST SHEET Description : ST SHEET()	Specification : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).	C	Estab

Category : p
Grade : 1
Size : L

1) Ordnance Factory Ambajhari

[ENR Registration]

Name	Specification	Use	Status
1) STEEL PLATE TO FB 70 OR ALTERNATIVE MATERIAL MN V STEEL UTS 590 MPA MIN YIELD STRESS 440 MPA MIN SIZE 2970 X 1175 X 11 MM OR 660 X 3525 X 11 MM OR 660 X 2350 X 11 MM ROLLING DIRECTION ALONG 2970 MM OR 660 MM DIMENSION IN LENGTH Description : STEEL PLATE TO FB 70 OR ALTERNATIVE MATERIAL MN V STEEL UTS 590 MPA MIN YIELD STRESS 440 MPA MIN SIZE 2970 X 1175 X 11 MM OR 660 X 3525 X 11 MM OR 660 X 2350 X 11 MM ROLLING DIRECTION ALONG 2970 MM OR 660 MM DIMENSION IN LENGTH()	Specification : STEEL PLATE TO FB-70 OR ALTERNATIVE MATERIAL:MN-V- STEEL UTS 590 MPA(MIN), YIELD STRESS 440 MPA (MIN) SIZE :2970 X 1175 X 11MM OR 660 X 3525 X 11MM)OR 660 X 2350 X 11MM. ROLLING DIRECTION ALONG 2970MM OR 660MM DIMENSION IN LENGTH.	R	Estab

Category : ddp
Grade : 1
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) ST FLAT 40X50 GD 817M40 R5 Description : ST FLAT 40X50 GD 817M40 R5()	Specification : STEEL FLAT 40+0.6MMX50+0.8MM&IN CUT LENGTH OF 70+1.00MM TO SPECN .BS:970:PT.1:1983 GD.817M40.WITH RESTRICTIONS OF S%=0.0 1MAX.,P%=0.015MAX &(S+P)%=0.022MAX IN H.R. AND ANNEALED CONDITION. TEST PIECE TO BE TESTED IN "T" CONDITION.OTHER PAR	R	Estab

Category : p
Grade : 1
Size : S

1) Ordnance Factory Ambajhari

[ENR Registration]

Name	Specification	Use	Status
1) PRE CUP COMPONENT ANNEALED BLANK FOR 125 MM SCCC BASE TO OFAJ DRG NO CC 471 D Description : PRE CUP COMPONENT ANNEALED BLANK FOR 125 MM SCCC BASE TO OFAJ DRG NO CC 471 D()	Specification : PRE CUP COMPONENT (ANNEALED BLANK) FOR 125 MM SCCC (BASE) TO OFAJ DRG. NO. CC-471 D.	C	Estab

Category : ddp
Grade : 1
Size : L

1) Ordnance Factory Ambajhari

[ENR Registration]

Name	Specification	Use	Status
1) NORMALISED AND PEELED CARBON STEEL ROUND BAR SIZE 41 00 0 1 MM DIA Description : NORMALISED AND PEELED CARBON STEEL ROUND BAR SIZE 41 00 0 1 MM DIA()	Specification : NORMALISED AND PEELED CARBON STEEL ROUND BAR SIZE 41 00 0 1 MM DIA	R	Estab

Category : ddp
Grade : 3
Size : L

1) Small Arms Factory

[Deemed Registration]

Name	Specification	Use	Status
1) STEEL FLATS[AS PER SPECIFICATION]()	AS PER SPECIFICATION	R	Estab.
2) STEEL ROUNDS[AS PER SPECIFICATION]()	AS PER SPECIFICATION	R	Estab.
3) STEEL SHEETS[AS PER SPECIFICATION]()	AS PER SPECIFICATION	R	Estab.

Category : DP
Grade : I
Size : L

1) Small Arms Factory

[Deemed Registration]

Name	Specification	Use	Status
1) ALLOY & SPECIAL STEELS IN VARIOUS GRADES[AS PER SPECIFICATION]()	AS PER SPECIFICATION	R	Estab.

Category : P
Grade : I
Size : L

1) Ordnance Factory Ambajhari

[ENR Registration]

Name	Specification	Use	Status
1) STEEL BILLET FOR 155MM M 107 FORGING AS PER DRG NO F 652 Description : STEEL BILLET FOR 155MM M 107 FORGING AS PER DRG NO F 652()	Specification : STEEL BILLET FOR 155MM M 107 FORGING AS PER DRG NO F 652	R	Estab

Category : dp
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) ST ROD 42MM DIA Description : ST ROD 42MM DIA()	Specification : ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.O	R	Estab

Category : ddp
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) ST ROD 42MM DIA Description : ST ROD 42MM DIA()	Specification : ST.ROD 42MM DIA TO SPECIFICATION IS-4432-1988 GD-13NI 13 CR3 WITH RESTRICTIONS S%=0.010MAX.,P%=0.015MAX.&(S+P)%=0.022MAX. GROUND & POLISHED BEFORE ROLLING.NORMALISED & PICKLED.RING GRIND TESTED TO ENSURE FORGING QUALITY.04-06METERS LONG.O	R	Estab

Category : ddp
Grade : 3
Size : S

1) Metal and Steel Factory

[ENR Registration]

Name	Specification	Use	Status
1) STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT Description : STEEL BLOOMS SIZE 300MM X 300 MM RCS OF DIFFERENT LENGTH AND WEIGHT()	Specification : STEEL BLOOMS SIZE 300 MM X 300 MM (RCS) AS PER DETAILS SCOPE OF SUPPLY AND RAILWAY SPECIFICATION NO. IRS-R-16/95 WITH CORRIGENDUM 1 TO 3.	R	Estab

Category : dp
Grade : 3
Size : L

1) Ordnance Factory Ambajhari

[Deemed Registration]

Name	Specification	Use	Status
1) PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL Description : PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL()	Specification : PARTED STEEL BILLET TO OFAJ DRG. NO. F-498 F & SPECN. AS PER OFAJ SPECN NO. F-466 (LATEST ISSUE) FOR 155 MM M1A4 SHELL	R	Estab
2) PARTED STEEL BILLET TO OFAJ DRG NO F 467D and OFAJ DRG SPECN F 345 G FOR 125 MM HE SHELL Description : PARTED STEEL BILLET TO OFAJ DRG NO F 467D and OFAJ DRG SPECN F 345 G FOR 125 MM HE SHELL()	Specification : OFAJ DRG/SPECN F-345 G	R	Estab
3) PARTED STEEL BILLET AS PER DRG NO 629 FOR 120MM PWP Description : PARTED STEEL BILLET AS PER DRG NO 629 FOR 120MM PWP()	Specification : AS PER DRAWING	R	Estab
4) ALLOY STEEL RODS / BARS & RCS BILLETS OF VARIOUS SIZES Description : ALLOY STEEL RODS / BARS & RCS BILLETS OF VARIOUS SIZES()	Specification : AS PER SPECIFICATION	R	Estab
5) COLD ROLLED STEEL STRIPS (MILD, MEDIUM & HIGH CARBON STEEL & HOT ROLLED GUAGE CORRECTED) Description : COLD ROLLED STEEL STRIPS (MILD, MEDIUM & HIGH CARBON STEEL & HOT ROLLED GUAGE CORRECTED)()	Specification : AS PER DRG.	R	Estab
6) ALLOY TOOL STEEL TO SPECIFICATION AISI H-13 IN FORGED, ANNEALED AND PROOF MACHINED CONDITION Description : ALLOY TOOL STEEL TO SPECIFICATION AISI H-13 IN FORGED, ANNEALED AND PROOF MACHINED CONDITION()	Specification : AS PER SPECIFICATION AND DRAWING	R	Estab

Category : ddp
Grade : 1
Size : L

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) ST FLAT 40X50 MM TO SPEC, BS 970 PT,1:1983 GD 835 M15 IN HOT ROLLED ANNEALED CONDITION .TEST PIECE IS TO BE TESTED IN BLANK CONDITION. Description : ST FLAT 40X50 MM TO SPEC, BS 970 PT,1:1983 GD 835 M15 IN HOT ROLLED ANNEALED CONDITION .TEST PIECE IS TO BE TESTED IN BLANK CONDITION.()	Specification : ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40,	R	Estab
2) STEEL ROD 44 MM DIA FOR MAG Description : STEEL ROD 44 MM DIA FOR MAG()	Specification : STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TO SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS	R	Estab
3) SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR MAG Description : SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR MAG()	Specification : SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROE	R	Estab
4) RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND. Description : RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.()	Specification : SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.	R	Estab
5) STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 Description : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3()	Specification : STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS	R	Estab
6) ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE Description : ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE()	Specification : SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE	R	Estab
7) STEEL ROD 32MM DIA Description : STEEL ROD 32MM DIA()	Specification : STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MAX,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE E	R	Estab
8) STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8 Description : STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8()	Specification : SPECN. IS:5517 -1993, DESIGNATION 40 C8	R	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE). Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).()	Specification : SPECIFICATION IS:513-(LATEST ISSUE).	R	Estab

Category : p
Grade : 1
Size : L

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE). Description : ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).()	Specification : SPECIFICATION IS:513-(LATEST ISSUE).	R	Estab

Category : p
Grade : 1
Size : L

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) STEEL FLAT SIZE 22X60 MM Description : STEEL FLAT SIZE 22X60 MM()	Specification : AS PER DRG.	C	Estab
2) STEEL ROD 35 MM DIA Description : STEEL ROD 35 MM DIA()	Specification : STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A A	C	Estab

Category : p
Grade : 3
Size : S

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) STEEL FLAT SIZE 22X60 MM Description : STEEL FLAT SIZE 22X60 MM()	Specification : AS PER DRG.	C	Estab
2) STEEL ROD 35 MM DIA Description : STEEL ROD 35 MM DIA()	Specification : STEEL RD. 35MM DIA +/- 0.25MM IN HOT ROLLED REELED,PEELED & ANNEALED CONDITION TO SPECN JSS:9510:06:2000(REV. NO.3)CODE REF.'B'.TEST PIECE TO BE TESTED IN 'T' CONDITION.MATERIAL SHOULD ALSO SATISY THE TEST AS PER ANNEXURE 'A' NATURE A A	C	Estab

Category : p
Grade : 3
Size : S

1882

RAMESH ENGINEERING WORKS
Parvesh Nagar Opp.Chuna Bhatti Nawada Road Sharda Nagar Saharanpur Uttar Pradesh
PIN1 : 247001
Phone No. : 2700097
GSTIN : 09AOVPK3521R1Z2

MRTR02890G

Download

1) Small Arms Factory

Category : p
Grade : Grade III
Size : S

1) Small Arms Factory

Category : p
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) POWER UNIT (FEED UNIT) AK-630 ASSY.107[72]()	Specification : POWER UNIT (FEED UNIT) AK-630 ASSY.107	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) Plug Representing Fuze in F/C TO DRG. NO. M-10394[60]()	Specification : As per drg. no. M-10394	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) RAIL ASSY CONSISTS OF REAR AND FRONT BRACKET TO DRG NO MCT 2313 2314 AND 2315[74]()	Specification : RAIL ASSY. CONSISTS OF REAR & FRONT BRACKET TO DRG.NO.MCT-2313, 2314 & 2315	C	Estab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) POST AIMING Drg. No 1290-000258[71]()	Specification : AS PER DRG	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) Guide Piece[70]()	Specification : Guide Piece to Drg.no. ARDE/SK/2689/135 Infinished & Hard Condition DS CAT N0.1005-007859. against folio no. 7012097933.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) LAMP AIMING[70]()	Specification : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) LAMP AIMING[70]()	Specification : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) LAMP AIMING[70]()	Specification : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) LAMP AIMING[70]()	Specification : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) LAMP AIMING[70]()	Specification : LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) PULL THROUGH CQA SA SK 369 Nylon for Rifle[71]()	Specification : PULL THROUGH 5.56MM1A (NYLON) TO DS CAT NO. 1005-557944 DC(I) NO. 26532-SA , DT. 30-07-10	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) GEAR DRG MP BPV29160 LF NO 7440901258[74]()	Specification : GEAR DRG MP BPV29160 LF NO 7440901258	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) STEM FINISHED TO DRG NO BSH8126170 LF 7434011004[74]()	Specification : STEM FINISHED TO DRG NO BSH8126170 (LF 7434011004)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL[70]()	Specification : ASUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()	Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL[70]()	Specification : SUPPLY OF COMPENSATOR AS PER DRG NO K 1021 WITH FIRMSMATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL[70]()	Specification : UPPER HAND GUARD ASSY WITH PICATINY RAIL AS PER DRG NO K 2080STAR2 WITH FIRMS MATERIAL	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025[70]()	Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT COVER RECEIVER TO DRG NO K 1025	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110STR 2 WITH FIRMS MATERIAL[70]()	Specification : SIDE FOLDABLE BUTT ASSY AS PER DRG NO K 4110STR 2 WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) BAYONET AS PER DRG NO K9030STR WITH FIRMS MATERIAL[70]()	Specification : BAYONET AS PER DRG NO K9030STR WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()	Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR[70]()	Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611STR	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Tiruchirapalli

Name	Specification	Use	Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]()	Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) MAIN BODY LF NO 7420212055[74]()	Specification : MAIN BODY LF NO 7420212055	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) TWIN CONTAINER ROUND PARTNO 1185633 LF 9911358474[99]()	Specification : TWIN CONTAINER/ROUND PART NO.1185633 TO OEM DRG.NO.2031324.	E	Nonestab
2) 84MM TPT TWIN CONTAINER PART1202502 LF 9911358478[99]()	Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.	E	Nonestab
3) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()	Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568.	E	Nonestab
4) PROPELLANT SUPPORT PART NO 1185138 LF 9911358419[99]()	Specification : PROPELLANT SUPPORT PART NO.1185138 TO OEM DRG.NO.3041011484/ TRD.DRG.NO. 2.2.2412	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) VALVE PART NO 404038806 LF 9911358407[99]()	Specification :	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) COVER PART NO 6429713 LF 9911358447[99]()	Specification :	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081001534 CASTOR WHEEL ARM LEFT PT NO 1130430[90]()	Specification : CASTOR WHEEL ARM LEFT PT NO 1130430.	C	Nonestab
2) 9081001535 CASTOR WHEEL ARM RIGHT PT NO 1130431[90]()	Specification : CASTOR WHEEL ARM RIGHT PT NO1130431	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) FRAME LF NO 7440201425[74]()	Specification : FRAME LF NO 7440201425	C	Nonestab
2) FRAME LF NO 7440201426[74]()	Specification : FRAME LF NO 7440201426	C	Nonestab
3) COVER LF NO 7440201430[74]()	Specification : COVER LF NO 7440201430	C	Nonestab
4) CHASSIS LF NO7440201446[74]()	Specification : CHASSIS LF NO7440201446	C	Nonestab
5) FRAME LF NO7440201451[74]()	Specification : FRAME LF NO7440201451	C	Nonestab
6) FRAME LF NO 7440201455[74]()	Specification : FRAME LF NO 7440201455	C	Nonestab
7) CHASIS LF NO 7440201456[74]()	Specification : CHASIS LF NO 7440201456	C	Nonestab
8) BODY LF NO 7440205827[74]()	Specification : BODY LF NO 7440205827	C	Nonestab
9) LEVER LF NO 7440205923[74]()	Specification : LEVER LF NO 7440205923	C	Nonestab
10) PLATE LF NO 7440801245[74]()	Specification : PLATE LF NO 7440801245	C	Nonestab
11) COVER LF NO 7446101138[74]()	Specification : COVER LF NO 7446101138	C	Nonestab

Category : p
Grade : 3
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) TRAIL LOCKING BAR LEFT AND RIGHT TO PART NO 1147189 AS PER ANNEXURE NO DHANUSH 1147189 2017[90]()	Specification : TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]()	Specification : BUFFER ASSY.TO DRG.1133736/5163822	C	Nonestab
2) 9081002984 TOWING EYE TO DRG NO 3048547[90]()	Specification : TOWING EYE TO DRG.NO.3048547	C	Nonestab
3) 9081005816 PLATFORM90 LEFT TO PART NO 1147127[90]()	Specification : PLATFORM LEFT TO PART NO.1147127	C	Nonestab
4) 9081005817 HOUSING TO PART NO 5161898[90]()	Specification : HOUSING TO PART NO.5161898.	C	Nonestab
5) 9081005822 HANDLE RIGHT TO PART NO 4073014[90]()	Specification : HANDLE RIGHT TO PART NO.4073014.	C	Nonestab
6) 9081005835 COVER TO PART NO 5141876[90]()	Specification : COVER TO PART NO.5141876	C	Nonestab
7) 9081005837 HANDLE LEFT TO PART NO 4072731[90]()	Specification : HANDLE LEFT TO PART NO.4072731	C	Nonestab
8) 9081005839 PISTON TO PART NO 5161864[90]()	Specification : PISTON TO PART NO.5161864	C	Nonestab
9) 9081005842 PLATFORM RIGHT TO PART NO 1147166[90]()	Specification : PLATFORM RIGHT TO PART NO.1147166	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081005701 SHAFT TO DRAWING NO 3054134[90]()	Specification : SHAFT TO DRAWING NO.3054134	C	Nonestab
2) 9081005812 AXLE TO PART NO 5160939[90]()	Specification : AXLE TO PART NO.5160939	R	Nonestab
3) 9081005813 SHAFT TO PART NO 5160940[90]()	Specification : SHAFT TO PART NO.5160940	C	Nonestab
4) 9081005814 AXLE TO PART NO 5160941[90]()	Specification : AXLE TO PART NO.5160941	C	Nonestab
5) 9081005815 AXLE TO PART NO 5162302[90]()	Specification : AXLE TO PART NO.5162302	C	Nonestab
6) 9081005823 AXLE TO PART NO 1132567[90]()	Specification : AXLE TO PART NO.1132567	C	Nonestab
7) 9081005824 AXLE TO PART NO 5141200[90]()	Specification : AXLE TO PART NO.5141200.	C	Nonestab
8) 9081005838 AXLE TO PART NO 5141877[90]()	Specification : AXLE TO PART NO.5141877	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) STAY GUN ( FOR PLATFORM TRAVELING) TO DRG.NO. IAN-52 A[90]()	Specification : STAY GUN ( FOR PLATFORM TRAVELING) TO DRG.NO. IAN-52 A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) HOSE TOWING VEHICLE EMERGENCY LINE SERVICE LINE TO DRG NO 2530 001006[90]()	Specification : AS PER DRG	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) VALVE REGULATING DRG NO IAN 123 A[90]()	Specification : VALVE REGULATING DRG NO IAN 123 A	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) COVER LF 7431411001[74]()	Specification : COVER LF 7431411001	C	Nonestab
2) BODY LF 7433511003[74]()	Specification : BODY LF 7433511003	C	Nonestab
3) CONNECTING ROD LF 7440205910[74]()	Specification : CONNECTING ROD LF 7440205910	C	Nonestab
4) CONNECTING ROD LF 7440205911[74]()	Specification : CONNECTING ROD LF 7440205911	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Ambajhari

Name	Specification	Use	Status
1) NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704[00]()	Specification : NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Ambajhari

Name	Specification	Use	Status
1) WINCH RAMP ASSY LH TO CAT SECTION and CAT PART NO 14 5420 000137 AND DRG CAT NO 23709 B[00]()	Specification : WINCH, RAMP ASSY. LH TO CAT SECTION & CAT/PART NO.14/5420-000137 AND DRG./CAT NO.23709/B	C	Nonestab
2) WINCH RAMP ASSY RH TO CAT SECTION and CAT PART NO 14 5420 000138 AND DRG CAT NO 23709 B[00]()	Specification : WINCH, RAMP ASSY. RH TO CAT SECTION & CAT/PART NO.14/5420-000138 AND DRG./CAT NO.23709/B	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY LF 7440206798[74]()	Specification : BODY LF 7440206798	C	Nonestab
2) PLUG LF 7441120925[74]()	Specification : PLUG LF 7441120925	C	Nonestab
3) BODY LF 7432311060[74]()	Specification : BODY LF 7432311060	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Ambajhari

Name	Specification	Use	Status
1) STABLIZER BLADE FIN TO C I A KIRKEE DRG NO 024[00]()	Specification : AS PER DRG	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Ambajhari

Name	Specification	Use	Status
1) PARA FRAME SMALL TO DRG NO ADRDE 1407 6245141407[62]()	Specification : PARA FRAME SMALL TO DRG NO ADRDE-1407	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Ambajhari

Name	Specification	Use	Status
1) ESCAPE WHEEL TO CQA A DRG NO 13034 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()	Specification : ESCAPE WHEEL TO CQA (A) DRG NO. 13034-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Ambajhari

Name	Specification	Use	Status
1) GEAR NO 1 TO CQA A DRG NO 13018 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()	Specification : GEAR NO.1. TO CQA (A) DRG NO. 13018-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)	C	Nonestab
2) GEAR NO 2 TO CQA A DRG NO 13027 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()	Specification : GEAR NO.2. TO CQA (A) DRG NO. 13027-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) FRAME FOR ZYRO STABILIZER DRG NO BL6122607 LF NO 9927098609[99]()	Specification : FRAME FOR ZYRO STABILIZER DRG NO BL6122607 LF NO 9927098609	C	Nonestab
2) BODY LF NO 7420211089[74]()	Specification : BODY LF NO 7420211089	C	Nonestab
3) CRANK SHAFT LF NO 7432411045[74]()	Specification : CRANK SHAFT LF NO 7432411045	C	Nonestab
4) CRANK SHAFT LF NO 7432411046[74]()	Specification : CRANK SHAFT LF NO 7432411046	C	Nonestab
5) MAGNET LF NO 7432417009[74]()	Specification : MAGNET LF NO 7432417009	C	Nonestab

Category : p
Grade : 3
Size : S

1) Machine Tool Proto Type Factory

Name	Specification	Use	Status
1) CUTTER UNIT ASSY DRG NO VMT SK 119 11000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set[30]()	Specification : CUTTER UNIT ASSY. DRG. NO. VMT-SK-119-11000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED, Qty: 01 Set	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Machine Tool Proto Type Factory

Name	Specification	Use	Status
1) TANK ASSY DRG NO VMT SK 119 8000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED[30]()	Specification : TANK ASSY DRG NO VMT SK 119 8000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Machine Tool Proto Type Factory

Name	Specification	Use	Status
1) PULLER ASSEMBLY DRG NO VMT SK 119 13000 10 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set[30]()	Specification : PULLER ASSY. DRG. NO. VMT-SK-119-13000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PART LIST ENCLOSED), Qty: 01 Set	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Machine Tool Proto Type Factory

Name	Specification	Use	Status
1) CENTER ASSY DRG NO VMT SK 119 16000 12 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set[30]()	Specification : CENTER ASSY DRG NO VMT SK 119 16000 12 FOR WINDING MACHINE 125MM SCCC AS PER PART LIST ENCLOSED Qty 01 Set	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Machine Tool Proto Type Factory

Name	Specification	Use	Status
1) SETTING ROLLER ASSY DRG NO VMT SK 119 14000 10 FOR WINDING MACHINE 125MM SCCC AS PER PARTLIST ENCLOSED Qty 01 Set[30]()	Specification : SETTING ROLLER ASSY. DRG. NO. VMT-SK 119-14000-10. FOR WINDING MACHINE 125MM SCCC (AS PER PARTLIST ENCLOSED), Qty: 01 Set	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) Change over switch Assembly 2A26 cb 10 49 cb[90]()	Specification : Change over switch Assembly to drg. no. 2A26 cb 10 49 cb. (With Details)	C	Nonestab
2) SWITCH ASSY AND AXLE WITH LEVER[90]()	Specification : SWITCH ASSY AND AXLE WITH LEVER DRG NO GCF TM 47 B SHEET 1 AND 2	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) RECEIVER CTM 0178 1 TO CTM 0178 2[70]()	Specification : RECEIVER IN F/C AS PER DRG NO. CTM 0178/1 TO 0178/2	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) SUPPORTING CLAMP TO 6206802014[62]()	Specification : SUPPORTING CLAMP TO DRG. NO. 172.03.038CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) SHAFT TO 6206102068[62]()	Specification : SHAFT TO DRG NO.175.02.046CB-2CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) ROLLER SUPPORT TO 6206203018[62]()	Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) SHUTTER DRIVE MECHANISM ASSY TO 6206102024[62]()	Specification : SHUTTER DRIVE MECHANISM ASSY TO DRG NO. 172.02.171CB-BCB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY LF 7440206909[74]()	Specification : BODY LF 7440206909	C	Nonestab
2) BODY LF 7440207034[74]()	Specification : BODY LF 7440207034	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Small Arms Factory

Name	Specification	Use	Status
1) HAMMER FOR LMG IN FINISHED CONDITION[70]()	Specification : HAMMER DRG NO SK3143/71 (DS CAT NO.1005-008003) FOR LMG 5.56MM IN FINISHED CONDITION FORGING TO BE SUPPLIED BY SAF AGAINST L.F.0412079014. DC NO.26922-SA, DT.29.08.16.”	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) ASSY CONTACT FOR RGB-60[13]()	Specification : AS DRAWING	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) SHAFT TO 6206102096[62]()	Specification : SHAFT TO DRG NO. 166.29.305CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) FRAME ASSY TO 6206207012[62]()	Specification : FRAME ASSY TO DRG NO. 172.22.011CB-1CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) PAD TO 6201070149[62]()	Specification : PAD TO DRG. NO.188.70.001-1	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) DISC WHEEL TO DRG NO 1015 000810[90]()	Specification : DISC WHEEL TO DRG NO 1015 000810	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987[90]()	Specification : PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6141701300 WELL DETONATOR ITX 245 MINE AP1B DR[61]()	Specification : WELL, DETONATOR FOR ASSLY. OF MINE AP 1B DIRECTIONAL	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) LEVER TO 6206211020[62]()	Specification : LEVER TO DRG NO. 172.28.009CB-2	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) CABLE PLATE ASSY TO 6206420018[62]()	Specification : CABLE PLATE ASSY TO DRG. NO. 172.64.028CB-2CB	C	Estab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) CARRIER TO 6206203009[62]()	Specification : CARRIER TO DRG NO. 172.18.027CB	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) HALF RING TO 6201081084[62]()	Specification : HALF RING TO DRG NO.188.81.058	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SLIPPING RING LF 6770430100 Description : SLIPPING RING LF 6770430100()	Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01	C	Nonestab

Category : p
Grade : 3
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) LOUVER LH TO 6209801477[62]()	Specification : PV572.0718.2363	C	Nonestab
2) LOUVER RH TO 6209801480[62]()	Specification : PV572.0718.2362	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) TRACER PLUG ASSEMBLY[01]()	Specification : 1) TRACER PLUG ASSEMBLY (120/125MM) AS PER DRG. NO.ISX20 SA 2) CONSISTING OF COMPONENTS TRACER PLUG (PHOSPHATED) AS PER DRG. NO. ISX328 3) FITTED WITH BRASS DISC AS PER DRG.NO. ISX329	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) BLANK FOR SEAR SAFETY FOR RIFLE 5.56MM INSAS()	AS PER DRAWING.	C	Not Estab.

Category : P
Grade : II
Size : S

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) LEVER DRG.NO.CII-125 ()	AS PER SPECIFICATION	C	Not Estab.
2) MIRROR MOUNT DRG NO. IRDE-1175/83()	AS PER SPECIFICATION	C	Not Estab.
3) TUBE ASSEMBLY TO DRG.NO.MCT-2459 FOR D-7()	AS PER SPECIFICATION	C	Not Estab.
4) COVER PLATE PROTECTIVE, DUST AND MOISTURE CII-140/6()	AS PER SPECIFICATION	C	Not Estab.
5) LAMP WANDERING 1A AS PER DRG.NO.MCT-3212()	AS PER SPECIFICATION	C	Not Estab.
6) NUT,PLAIN,HEXAGON AS PER DRG.NO.:IRDE-335/52 ()	AS PER SPECIFICATION	C	Not Estab.
7) RING RETAINING LARGE AS PER DRG. NO. IRDE-335/33()	AS PER SPECIFICATION	C	Not Estab.
8) HOUSING OBJECTIVE CQA(I)-793/44()	AS PER SPECIFICATION	C	Not Estab.
9) ADAPTOR TO CWC/229/41()	AS PER SPECIFICATION	C	Not Estab.
10) DIAL SCALE MCT-3109()	AS PER SPECIFICATION	C	Not Estab.
11) BOLT LATCH MCT-3103()	AS PER SPECIFICATION	C	Not Estab.
12) NUT SLEEVE MCT-3108()	AS PER SPECIFICATION	C	Not Estab.
13) CELL EP CWC/229/35/1()	AS PER SPECIFICATION	C	Not Estab.
14) Elevation Curve-557 Drg. No. CQA(I)-792/7()	AS PER SPECIFICATION	C	Not Estab.
15) OG ASSY CONSISTING OF (i) Ring Lock Keyed IRDE-1274/35 (ii) Cup IRDE- 1274/36 (iii) Spacer Optical Element IRDE-1274/38 (iv) Ray Shade IRDE-1274/41()	AS PER SPECIFICATION	C	Not Estab.
16) CELL GRATICULE CWC/229/28/1()	AS PER SPECIFICATION	C	Not Estab.
17) RING RETAINING EP CWC/229/33()	AS PER SPECIFICATION	C	Not Estab.
18) FRAME W/O ENGRAVING Drg. no. Ã¢â‚¬â€œ MCT-3468()	AS PER SPECIFICATION	C	Not Estab.
19) GRATICULE RING CWC/229/67/2()	AS PER SPECIFICATION	C	Not Estab.
20) SECURING RING CWC/229/56/1()	AS PER SPECIFICATION	C	Not Estab.
21) COVER PLATE H CWC /229/64/3()	AS PER SPECIFICATION	C	Not Estab.
22) CELL OPTICAL ELEMENT TO MCT-2943/2()	AS PER SPECIFICATION	C	Not Estab.
23) SCREW MCT-2949/2()	AS PER SPECIFICATION	C	Not Estab.
24) RING RETAINING MCT-2959/1()	AS PER SPECIFICATION	C	Not Estab.
25) ASSY. OF EYE PEICE LEFT MCT-3286()	AS PER SPECIFICATION	C	Not Estab.
26) ASSY. OF EYE P[EICE RIGHT MCT-3285()	AS PER SPECIFICATION	C	Not Estab.

Category : P
Grade : III
Size : S

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]()	Specification : Vial Level Circular Cased MK 2 MCT 3439	C	Nonestab

Category : P
Grade : III
Size :

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) Vial Level Circular Cased MK 2 MCT 3439[74]()	Specification : Vial Level Circular Cased MK 2 MCT 3439	C	Estab
2) LEVEL FIRE CONTROL INSTRUMENT AS PER DRG. NO. IRDE-1135/SA-1[74]()	Specification :	R	Estab

Category : P
Grade : III
Size :

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) BLANK FOR CARBON NOZZAL LF 9911358750 Description : BLANK FOR CARBON NOZZAL LF 9911358750()	Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206	R	Nonestab

Category : p
Grade : 3
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) MIRROR ASSY TO DRG NO AL5950538 (LF 7440200770)[74]()	Specification : MIRROR ASSY TO DRG NO AL5950538 (LF 7440200770)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)[74]()	Specification : ELECTROMAGNET TO DRG NO AL6650044 FOR BLOCK D (LF 7440200208)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)[74]()	Specification : UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) EYE GUARD FOR PNK-4S TO DRG NO BL6548046 (L.F.-7440300177)[74]()	Specification : EYE GUARD FOR PNK-4S TO DRG NO BL6548046 (L.F.-7440300177)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)[74]()	Specification : CONTROL BOCK TO DRG NO AL5139107 FOR BLOCK D (LF 7440200315)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)[74]()	Specification : BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) COVER FRAME ASSY BL6426108 FOR PNK-4S (LF 7440300982)[74]()	Specification : COVER FRAME ASSY BL6426108 FOR PNK-4S (LF 7440300982)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) LOCATOR TO DRG NO BL8362427 (LF 7432111032)[74]()	Specification : LOCATOR TO DRG NO BL8362427 (LF 7432111032)	C	Estab
2) CLAMP TO DRG NO AF8667322 (LF 7432412011)[74]()	Specification : CLAMP TO DRG NO AF8667322 (LF 7432412011)	C	Estab
3) MOUNT TO DRG NO AF8638214 (LF 7432412046)[74]()	Specification : MOUNT TO DRG NO AF8638214 (LF 7432412046)	C	Estab
4) MOUNT TO DRG NO AF8637071 (LF 7432411043)[74]()	Specification : MOUNT TO DRG NO AF8637071 (LF 7432411043)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) Gear for Block BPV-29 to drg. No. BPV29-160[74]()	Specification : Gear for Block BPV-29 to drg. No. BPV29-160	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) Block PL, AL5.008.009[74]()	Specification : Block PL, AL5.008.009	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) SPACER FOR BLOCK D TO DRG NO AL7840573 (LF 7440200402)[74]()	Specification : SPACER FOR BLOCK D TO DRG NO AL7840573 (LF 7440200402)	C	Estab
2) SPACER FOR BLOCK D TO DRG NO IUMK713111007 (LF 7440200408)[74]()	Specification : SPACER FOR BLOCK D TO DRG NO IUMK713111007 (LF 7440200408)	C	Estab
3) GASKET FOR INFORMATION BLOCK 1G46 (LF 7440200812)[74]()	Specification : GASKET FOR INFORMATION BLOCK 1G46 (LF 7440200812)	C	Estab
4) CARDEN HEAD FOR VISOR 1G46 (LF 7440200906)[74]()	Specification : CARDEN HEAD FOR VISOR 1G46 (LF 7440200906)	C	Estab
5) AXLE FOR VISOR TO DRG NO IUMK716513001 (LF 7440201350)[74]()	Specification : AXLE FOR VISOR TO DRG NO IUMK716513001 (LF 7440201350)	C	Estab
6) DRIVER DRG NO AL8344129 FOR VISOR (LF 7440201705)[74]()	Specification : DRIVER DRG NO AL8344129 FOR VISOR (LF 7440201705)	C	Estab
7) FRAME FOR PNK-4S (LF 7440202620)[74]()	Specification : FRAME FOR PNK-4S (LF 7440202620)	C	Estab
8) COVER FOR BPV29000 TO DRG NO BPV29.142-01 (LF 7440901422)[74]()	Specification : COVER FOR BPV29000 TO DRG NO BPV29.142-01 (LF 7440901422)	C	Estab
9) CAP FOR BPV29000 TO DRG NO PK43.042-04 (LF 7440901423)[74]()	Specification : CAP FOR BPV29000 TO DRG NO PK43.042-04 (LF 7440901423)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) MACHINING OF BODY TO DRG NO Y-6213326 (LF 7432316006)[74]()	Specification : MACHINING OF BODY TO DRG NO Y-6213326 (LF 7432316006)	C	Estab
2) COMPLETE MACHINING OF FRAME TO DRG NO BL8638006 (LF 7570124400)[75]()	Specification : COMPLETE MACHINING OF FRAME TO DRG NO BL8638006 (LF 7570124400)	C	Estab
3) COMPLETE MACHINING OF BASE TO DRG NO BL8060039 (LF 7570126500)[75]()	Specification : COMPLETE MACHINING OF BASE TO DRG NO BL8060039 (LF 7570126500)	C	Estab
4) COMPLETE MACHINING OF COVER TO DRG NO BL8040570 (LF 7570126900)[75]()	Specification : COMPLETE MACHINING OF COVER TO DRG NO BL8040570 (LF 7570126900)	C	Estab
5) COMPLETE MACHINING OF BODY TO DRG NO BL8022364 (LF 7570130600)[75]()	Specification : COMPLETE MACHINING OF BODY TO DRG NO BL8022364 (LF 7570130600)	C	Estab
6) COMPLETE MACHINING OF COVER TO DRG NO BL8040672 (LF 7570131200)[75]()	Specification : COMPLETE MACHINING OF COVER TO DRG NO BL8040672 (LF 7570131200)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)[74]()	Specification : BODY FOR BPV29000 TO DRG NO BPV29102 (LF 7440201415)	C	Estab
2) COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)[74]()	Specification : COVER FOR BPV29000 TO DRG NO BPV29103 (LF 7440201416)	C	Estab
3) GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)[74]()	Specification : GUIDE FOR BLOCK BPV-29 TO DRG NO BPV29.290 (LF 7440901259)	C	Estab
4) COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)[74]()	Specification : COVER FOR BPV29000 TO DRG NO BPV29108 (LF 7440901418)	C	Estab
5) GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)[74]()	Specification : GUIDE FOR BPV29000 TO DRG NO BPV29111 (LF 7440901419)	C	Estab
6) LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)[74]()	Specification : LEVER FOR BPV29000 TO DRG NO BPV29113 (LF 7440901420)	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)[74]()	Specification : BODY FOR BPV29000 TO DRG NO 29.099 (LF 7440201414)	C	Estab
2) COMPLETE MACHINING OF MAIN BODY DC24 LF NO 7570202400[75]()	Specification : COMPLETE MACHINING OF MAIN BODY DC24 LF NO 7570202400	C	Estab
3) MACHINING OF BODY DC250 M5 LF NO 7570125000[75]()	Specification : MACHINING OF BODY DC250 M5 LF NO 7570125000	C	Estab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)[74]()	Specification : UNIT BG29-4S TO DRG NO. BG29-4S.000 (LF-7440205907)	C	Nonestab
2) BUSHING LF NO 7440200737[74]()	Specification : BUSHING LF NO 7440200737	C	Nonestab
3) STOCK LF NO 7440201747[74]()	Specification : STOCK LF NO 7440201747	C	Nonestab
4) BUSH LF NO 7440201968[74]()	Specification : BUSH LF NO 7440201968	C	Nonestab
5) BODY LF NO 7440205749[74]()	Specification : BODY LF NO 7440205749	C	Nonestab
6) PLATE LF NO 7440205751[74]()	Specification : PLATE LF NO 7440205751	C	Nonestab
7) LEVER LF NO 7440205772[74]()	Specification : LEVER LF NO 7440205772	C	Nonestab
8) STOP LF NO 7440205985[74]()	Specification : STOP LF NO 7440205985	C	Nonestab
9) FLANGE LF NO 7440206000[74]()	Specification : FLANGE LF NO 7440206000	C	Nonestab
10) SPREAD LF NO 7440206674[74]()	Specification : SPREAD LF NO 7440206674	C	Nonestab
11) PLATE LF NO 7440206681[74]()	Specification : PLATE LF NO 7440206681	C	Nonestab
12) LEVER LF NO 7440206683[74]()	Specification : LEVER LF NO 7440206683	C	Nonestab
13) ARM LF NO 7440206690[74]()	Specification : ARM LF NO 7440206690	C	Nonestab
14) RIVET LF NO 7440206691[74]()	Specification : RIVET LF NO 7440206691	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) CLAMP TO DRG NO AF8667322 (LF 7432412011)[74]()	Specification : CLAMP TO DRG NO AF8667322 (LF 7432412011)	C	Nonestab
2) MOUNT TO DRG NO AF8637071 (LF 7432411043)[74]()	Specification : MOUNT TO DRG NO AF8637071 (LF 7432411043)	C	Nonestab
3) MOUNT TO DRG NO AF8638214 (LF 7432412046)[74]()	Specification : MOUNT TO DRG NO AF8638214 (LF 7432412046)	C	Nonestab
4) LOCATOR TO DRG NO BL8362427 (LF 7432111032)[74]()	Specification : LOCATOR TO DRG NO BL8362427 (LF 7432111032)	C	Nonestab
5) TERMINAL BLOCK DRG NO AL6672273 LF NO 7440200723[74]()	Specification : TERMINAL BLOCK DRG NO AL6672273 LF NO 7440200723	C	Nonestab
6) AXLE ECCENTRIC DRG NO IUMK304515001 LF NO 7440200725[74]()	Specification : AXLE ECCENTRIC DRG NO IUMK304515001 LF NO 7440200725	C	Nonestab
7) CASING DRG NO AL8212290 LF NO 7440201703[74]()	Specification : CASING DRG NO AL8212290 LF NO 7440201703	C	Nonestab
8) BODY DRG NO AL8035159 LF NO 7440205784[74]()	Specification : BODY DRG NO AL8035159 LF NO 7440205784	C	Nonestab
9) TAPE DRG NO AL6394015 LF NO 7445101481[74]()	Specification : TAPE DRG NO AL6394015 LF NO 7445101481	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) Protective cover sight to part no.1161416 [90]()	Specification : AS PER GCF /DRG/SPECN/IS/BS	C	Nonestab

Category : dp
Grade : Grade I
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) LEVER REMOTE CONTROL TO DRG NO. 3040-003322[91]()	Specification : AS PER DRG.	C	Nonestab
2) BRACKET TO DRG. NO. 1015-000327[91]()	Specification : AS PER DRG	C	Nonestab
3) CAM TO DRG. NO. 1015-000373[91]()	Specification : AS PER DRG	C	Nonestab
4) CAP (FOR CAP DUST REOIL MECH) TO DRG. NO. 1015-000580[91]()	Specification : AS PER DRG	C	Nonestab
5) CYLINDER CONTROL TO DRG. NO. 1015-000585[91]()	Specification : AS PER DRG	C	Nonestab
6) SOCKET HAND SPIKE (FOR TRAIL LEFT ASSY) TO DRG. NO. 1015-000735[91]()	Specification : AS PER DRG.	C	Nonestab

Category : dp
Grade : Grade I
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) FUZE SETTING TOOL TO PT. NO. 5189693[90]()	Specification : AS PER TENDER NO. 160457FHFO ON E-PROC. PORTAL	C	Nonestab
2) FUZE FITTING TOOL PT. NO. 5189694[90]()	Specification : AS PER TENDER NO. 160457FHFO ON E-PROC. PORTAL	C	Nonestab

Category : dp
Grade : Grade I
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157 Description : ADEN LINK MK I FOR 30MM ADEN AMMN LF 9911358157()	Specification : LINK MK-I TO DESICNER'S REF.D.5.(E)10050/161 ISSUE 6A DATED 30-10-64 FOR 30MM ADEN AMMUNATION. NOTE:-QUALITY DOCUMENTS TO BE SUPPLIED BY FIRM AS PER ENCL	R	Nonestab

Category : p
Grade : 3
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) LEVER SLIDE LOCKING BLANK FOR FOR PISTOL AUTO 9MM 1A.[70]()	Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A	C	Nonestab

Category : P
Grade : II
Size :

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab
2) Lanyard Short to Drg No 161 1292[63]()	Specification : As per Drg. No. 161-1292	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab
2) Lanyard Short to Drg No 161 1292[63]()	Specification : As per Drg. No. 161-1292	C	Nonestab
3) Hand Rammer to part no 166 282[63]()	Specification : As per Part No. 166-282	C	Nonestab
4) Brush primer as per drg no 161 1390[63]()	Specification : as per drg no 161 1390	C	Nonestab
5) Pressure Plate Fasten Fixture to Part No 166 617[63]()	Specification : As per Part No 166-617	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Ordnance Factory Kanpur

Name	Specification	Use	Status
1) DISC TO PART NO 161 471 and 24 more investment casting items[64]()	Specification : As per drgs. available in www.ofbepro.gov.in	C	Nonestab
2) Lanyard Short to Drg No 161 1292[63]()	Specification : As per Drg. No. 161-1292	C	Nonestab
3) Hand Rammer to part no 166 282[63]()	Specification : As per Part No. 166-282	C	Nonestab
4) Brush primer as per drg no 161 1390[63]()	Specification : as per drg no 161 1390	C	Nonestab
5) Pressure Plate Fasten Fixture to Part No 166 617[63]()	Specification : As per Part No 166-617	C	Nonestab
6) ARM AS PER DRG NO D 4083347[63]()	Specification : As per drawing	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) LOCK[06]()	Specification : IS:5517-04 DESIGNATION 42 Cr 6 v1	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) Pulley[06]()	Specification : Assemble item	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) PRESSURE AND VACCUM RELIEF VALVE[06]()	Specification : PRESSURE AND VACCUM RELIEF VALVE / 172.31.081CB-1	E	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) BRACE ASSY[06]()	Specification : BRACE ASSY / 54.28.772CBCB	E	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) THRUST BUSHING / 175.95.114-1[06]()	Specification : THRUST BUSHING / 175.95.114-1	E	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) Right hand carrier - 172.62.136[06]()	Specification : GOST:4543-71	C	Nonestab
2) Left hand carrier - 175.62.137[06]()	Specification : GOST 4543-71	C	Nonestab

Category : p
Grade : Grade II
Size : S

1) Heavy Vehicle Factory

Name	Specification	Use	Status
1) BRACKET ASSEMBLY DRAWING[06]()	Specification : GOST4543-71	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081008459 MACHINING OF TRAIL SPADE TO DRAWING NO 3048309 MATERIAL WILL BE SUPPLIED BY GCF[90]()	Specification : MACHINING OF TRAIL SPADE TO DRAWING NO.3048309.(MATERIAL WILL BE SUPPLIED BY GCF).	C	Estab
2) 9081008458 MACHINING OF END COVER TO DRAWING NO 4071725 MATERIAL WILL BE SUPPLIED BY GCF[90]()	Specification : MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF).	C	Estab

Category :
Grade : Grade III
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9070056720 PART M A OF RB TO DRG GCF 20A SK874[90]()	Specification : 9070056720 PART M A OF RB TO DRG GCF 20A SK874	C	Nonestab

Category :
Grade : Grade III
Size : S

1883

AMTONE RUBBER INDUSTRIES
VILL+PO: RAGHUDEVPUR (EAST) PS: ULUBERIA HOWRAH West Bengal
PIN1 : 711322
Phone No. : 26619695
GSTIN : 19AFUPL1078A1ZB

AFUPL1078A

Download

1) Opto Electronic Factory

Name	Specification	Use	Status
1) RING LF 7420112078[74]()	Specification : RING LF 7420112078	C	Nonestab
2) BLOCK ASSY LF 7420113001[74]()	Specification : BLOCK ASSY LF 7420113001	C	Nonestab
3) WASHER LF 7420113026[74]()	Specification : WASHER LF 7420113026	C	Nonestab
4) SLEEVE LF 7420113036[74]()	Specification : SLEEVE LF 7420113036	C	Nonestab
5) COVER PLASTIC MOULD LF 7420113039[74]()	Specification : COVER PLASTIC MOULD LF 7420113039	C	Nonestab
6) BUSH LF 7420413001[74]()	Specification : BUSH LF 7420413001	C	Nonestab
7) PIN LF 7432113002[74]()	Specification : PIN LF 7432113002	C	Nonestab
8) ASSY OF CASE AND COVER LF 7432113003[74]()	Specification : ASSY OF CASE AND COVER LF 7432113003	C	Nonestab
9) PANEL LF 7432511062[74]()	Specification : PANEL LF 7432511062	C	Nonestab
10) COVER PLASTIC MOULD LF 7580100048[75]()	Specification : COVER PLASTIC MOULD LF 7580100048	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BLANK PLASTIC MOULD LF 7582501010[75]()	Specification : BLANK PLASTIC MOULD LF 7582501010	C	Nonestab
2) BOARD LF 9001060994[90]()	Specification : BOARD LF 9001060994	C	Nonestab
3) GASKET LF 9001100030[90]()	Specification : GASKET LF 9001100030	C	Nonestab
4) BLOCK LF 9001110050[90]()	Specification : BLOCK LF 9001110050	C	Nonestab
5) RING LF 9001110266[90]()	Specification : RING LF 9001110266	C	Nonestab
6) RING LF 9001110671[90]()	Specification : RING LF 9001110671	C	Nonestab
7) WASHER LF 9001110718[90]()	Specification : WASHER LF 9001110718	C	Nonestab
8) RING LF 9001110832[90]()	Specification : RING LF 9001110832	C	Nonestab
9) WASHER LF 9001111573[90]()	Specification : WASHER LF 9001111573	C	Nonestab
10) RING LF 9004110889[90]()	Specification : RING LF 9004110889	C	Nonestab
11) BODY LF 9021101035[90]()	Specification : BODY LF 9021101035	C	Nonestab
12) PIN LF 9021101291[90]()	Specification : PIN LF 9021101291	C	Nonestab
13) BLOCK LF 9927062404[99]()	Specification : BLOCK LF 9927062404	C	Nonestab
14) GLAND LF 9927088393[99]()	Specification : GLAND LF 9927088393	C	Nonestab
15) GASKET 2 LF 9927088814[99]()	Specification : GASKET 2 LF 9927088814	C	Nonestab
16) BLANKING PLUG LF 9927094487[99]()	Specification : BLANKING PLUG LF 9927094487	C	Nonestab
17) COVER LF NO 7432113001[74]()	Specification : COVER LF NO 7432113001	C	Nonestab
18) ASSY OF CASE AND COVER LF NO 7432113004[74]()	Specification : ASSY OF CASE AND COVER LF NO 7432113004	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) BODY HOUSING ELECTRONIC COMPONENT LF 7432411034[74]()	Specification : BODY HOUSING ELECTRONIC COMPONENT LF 7432411034	C	Nonestab
2) SLEEVE LF 7432413012[74]()	Specification : SLEEVE LF 7432413012	C	Nonestab
3) BOARD LF 7432413017[74]()	Specification : BOARD LF 7432413017	C	Nonestab
4) BOARD ASSY LF 7432413029[74]()	Specification : BOARD ASSY LF 7432413029	C	Nonestab
5) SPACER LF 7440200474[74]()	Specification : SPACER LF 7440200474	C	Nonestab
6) CONNECTING BOARD LF 7440201128[74]()	Specification : CONNECTING BOARD LF 7440201128	C	Nonestab
7) BUSH LF 7446003004[74]()	Specification : BUSH LF 7446003004	C	Nonestab
8) BLOCK LF 7446003008[74]()	Specification : BLOCK LF 7446003008	C	Nonestab
9) CAP FOR PZU 7 LF 7446003428[74]()	Specification : CAP FOR PZU 7 LF 7446003428	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) FLURO PLASTIC ROD SIZE 30 MM DIA LF 2102782005[21]()	Specification : FLURO PLASTIC ROD SIZE 30 MM DIA LF 2102782005	R	Nonestab
2) COVER LF 7420113025[74]()	Specification : COVER LF 7420113025	C	Nonestab
3) WASHER LF 7420113045[74]()	Specification : WASHER LF 7420113045	C	Nonestab
4) GASKET LF 7420115021[74]()	Specification : GASKET LF 7420115021	C	Nonestab
5) GASKET LF 7432413006[74]()	Specification : GASKET LF 7432413006	C	Nonestab
6) EYE SHIELD LF 7434013002[74]()	Specification : EYE SHIELD LF 7434013002	C	Nonestab
7) SPACER LF 7445101423[74]()	Specification : SPACER LF 7445101423	C	Nonestab
8) BUSH LF 7446003006[74]()	Specification : BUSH LF 7446003006	C	Nonestab
9) BUSH LF 7446101141[74]()	Specification : BUSH LF 7446101141	C	Nonestab
10) BRUSH LF 9001050222[90]()	Specification : BRUSH LF 9001050222	C	Nonestab
11) BLOCK LF 9023111360[90]()	Specification : BLOCK LF 9023111360	C	Nonestab
12) INSERT LF 9035111472[90]()	Specification : INSERT LF 9035111472	C	Nonestab
13) FLURO PLAST FILM LF 9927099122[99]()	Specification : FLURO PLAST FILM SIZE 0.02 MM LF 9927099122	C	Nonestab
14) WIRING BOARD PLASTIC MOULD LF 7582500005[75]()	Specification : WIRING BOARD PLASTIC MOULD LF 7582500005	C	Nonestab
15) STRAP LF 9001110973[90]()	Specification : STRAP LF 9001110973	C	Nonestab
16) COVER LF 9001111426[90]()	Specification : COVER LF 9001111426	C	Nonestab
17) OIL SEAL LF 9002111506[90]()	Specification : OIL SEAL LF 9002111506	C	Nonestab
18) SLEEVE LF 9927063772[99]()	Specification : SLEEVE LF 9927063772	C	Nonestab
19) BODY LF 9927063774[99]()	Specification : BODY LF 9927063774	C	Nonestab
20) COVER M22X1 I Q LF 9927080763[99]()	Specification : COVER M22X1 I Q LF 9927080763	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) GASKET LF 7420114006[74]()	Specification : GASKET LF 7420114006	C	Nonestab
2) BUSH LF 7421014001[74]()	Specification : BUSH LF 7421014001	C	Nonestab
3) GASKET LF 7432411029[74]()	Specification : GASKET LF 7432411029	C	Nonestab
4) INSERT LF 7432414010[74]()	Specification : INSERT LF 7432414010	C	Nonestab
5) GASKET LF 7432414015[74]()	Specification : GASKET LF 7432414015	C	Nonestab
6) RING LF 7432414017[74]()	Specification : RING LF 7432414017	C	Nonestab
7) COVER LF 7440201495[74]()	Specification : COVER LF 7440201495	C	Nonestab
8) CAP BLOCK D 1G46 LF 7445102015[74]()	Specification : CAP BLOCK D 1G46 LF 7445102015	C	Nonestab
9) GASKET LF 7445102359[74]()	Specification : GASKET LF 7445102359	C	Nonestab
10) GASKET LF 7445102360[74]()	Specification : GASKET LF 7445102360	C	Nonestab
11) COVER LF 7524010112[75]()	Specification : COVER LF 7524010112	C	Nonestab
12) GASKET RUBBER MOULD LF 7592600002[75]()	Specification : GASKET RUBBER MOULD LF 7592600002	C	Nonestab
13) GASKET LF 9001100810[90]()	Specification : GASKET LF 9001100810	C	Nonestab
14) CAP LF 9002101198[90]()	Specification : CAP LF 9002101198	C	Nonestab
15) GASKET F LF 9004101369[90]()	Specification : GASKET F LF 9004101369	C	Nonestab
16) GASKET LF 9014101485[90]()	Specification : GASKET LF 9014101485	C	Nonestab
17) CAP LF 9911460614[99]()	Specification : CAP LF 9911460614	C	Nonestab
18) GASKET LF 9927063755[99]()	Specification : GASKET LF 9927063755	C	Nonestab
19) RING LF 9927086175[99]()	Specification : RING LF 9927086175	C	Nonestab
20) RING LF 9927090321[99]()	Specification : RING LF 9927090321	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) RUBBER SHEET SIZE 5MM LF 2103670003[21]()	Specification : RUBBER SHEET SIZE 5MM LF 2103670003	C	Nonestab
2) RING LF 7420114026[74]()	Specification : RING LF 7420114026	C	Nonestab
3) PLUG LF 7420114036[74]()	Specification : PLUG LF 7420114036	C	Nonestab
4) PROTECTOR LF 7432314003[74]()	Specification : PROTECTOR LF 7432314003	C	Nonestab
5) GASKET LF 7432414004[74]()	Specification : GASKET LF 7432414004	C	Nonestab
6) GASKET LF 7434015001[74]()	Specification : GASKET LF 7434015001	C	Nonestab
7) GASKET LF 7440101205[74]()	Specification : GASKET LF 7440101205	C	Nonestab
8) SHOCK ABSORBER LF 7440101208[74]()	Specification : SHOCK ABSORBER LF 7440101208	C	Nonestab
9) CAP LF 7582300001[72]()	Specification : CAP LF 7582300001	C	Nonestab
10) HEAD REST ASSY RUBBER MOULD LF 7582300002[75]()	Specification : HEAD REST ASSY RUBBER MOULD LF 7582300002	C	Nonestab
11) WASHER LF 9001110421[90]()	Specification : WASHER LF 9001110421	C	Nonestab
12) SEAL LF 9001120042[90]()	Specification : SEAL LF 9001120042	C	Nonestab
13) EYE SHIELD LF 9911460369[99]()	Specification : EYE SHIELD LF 9911460369	C	Nonestab
14) CAP LF 9911460707[99]()	Specification : CAP LF 9911460707	C	Nonestab
15) BUSH LF 7421014002[74]()	Specification : BUSH LF 7421014002	C	Nonestab
16) SHOCK ABSORBER LF 9004100887[90]()	Specification : SHOCK ABSORBER LF 9004100887	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) GLAND LF 7432311014[74]()	Specification : GLAND LF 7432311014	C	Nonestab
2) WASHER LF 7432413004[74]()	Specification : WASHER LF 7432413004	C	Nonestab
3) GASKET LF 7432413005[74]()	Specification : GASKET LF 7432413005	R	Nonestab
4) INSULATOR LF 7432413011[74]()	Specification : INSULATOR LF 7432413011	C	Nonestab
5) CAP LF 7432413014[74]()	Specification : CAP LF 7432413014	C	Nonestab
6) COVER LF 7432413023[74]()	Specification : COVER LF 7432413023	C	Nonestab
7) COVER PLASTIC MOULD LF 7580100051[75]()	Specification : COVER PLASTIC MOULD LF 7580100051	C	Nonestab
8) BODY LF 9001050996[90]()	Specification : BODY LF 9001050996	C	Nonestab
9) BLOCK LF 9001060982[90]()	Specification : BLOCK LF 9001060982	C	Nonestab
10) COVER LF 9001110172[90]()	Specification : COVER LF 9001110172	C	Nonestab
11) COVER LF 9001110550[90]()	Specification : COVER LF 9001110550	C	Nonestab
12) BLOCK ASSY LF 9002051024[90]()	Specification : BLOCK ASSY LF 9002051024	C	Nonestab
13) RING LF 9927063758[99]()	Specification : RING LF 9927063758	C	Nonestab
14) JOINT LF 9927091006[99]()	Specification : JOINT LF 9927091006	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Machine Tool Proto Type Factory

Name	Specification	Use	Status
1) SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets[71]()	Specification : SET OF GASKETS AS PER ANNEXURE GKT1 OF KAVACH MOD II 08 Sets	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) Shock Absorber LF 7440200856[74]()	Specification : Shock Absorber LF 7440200856	C	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Avadi

Name	Specification	Use	Status
1) Polycarbonate Film zero point five mm 100 cm width[21]()	Specification : As per specification	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Parachute Factory

Name	Specification	Use	Status
1) RUBBER BAND 13MM Width 150 MM Circumference for BP Jaguar[2103679554]()	Specification : ADRDE/540-A-5(a) AND ADRDE/QMS/TGTE/T/2018/03 DATED 25.10.2018	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) PRIMER GASKET F1301 036530 D LF 2013436143[20]()	Specification : PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) 3rd SET OF 4 ITEMS FOR MMHG 9911358526 Description : 3rd SET OF 4 ITEMS FOR MMHG 9911358526()	Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS	C	Nonestab
2) SLIPPING RING LF 6770430100 Description : SLIPPING RING LF 6770430100()	Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) PRIMER GASKET PART NO 6409794 LF 2013999910 Description : PRIMER GASKET PART NO 6409794 LF 2013999910()	Specification : PRIMER GASKET PART NO.6409794 TO OEM DRG.NO.304083636/ TRD.DRG.NO.1.2.2370	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) O RING 76 X 2 PART NO 450001307 LF 2013999919[20]()	Specification : O-RING 76 X 2 PART NO.450001307 DRG.NO.TRD-1-1-2974	R	Nonestab
2) O RING 67 X 2 PART NO 6414120 LF 2013999921[20]()	Specification : O-RING 67 X 2 PART NO.6414120 DRG.NO.TRD-1-1-2973	R	Nonestab
3) O RING 29 2 X 2 PART NO 6413414 LF 2013999920[20]()	Specification : O-RING 29.2 X 2 PART NO.6413414 DRG.NO.TRD-1-1-2972	R	Nonestab
4) O RING 61 X 1 6 PART NO 6413412 LF 2013999914[20]()	Specification : O-RING 61 X 1.6 PART NO.6413412 DRG.NO.TRD-1-1-2966	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) O RING 78 X 2 PART NO 6409795 LF 2013999909[20]()	Specification : O-RING 78 X 2 PART NO.6409795 DRG.NO.TRD-1-1-2960	C	Nonestab
2) O RING 37 X 2 4 PART NO 6414441 LF 2013999924[20]()	Specification : O-RING 37 X 2.4 PART NO.6414441 DRG.NO.TRD-1-1-2978	C	Nonestab
3) O RING 75 5 X 2 4 PART NO 6413411 LF 2013999922[20]()	Specification : O-RING 75.5 X 2.4 PART NO.6413411 DRG.NO.TRD-1-1-2977	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6410900220 LENS PART DRG. 065/4 FOR 125MM HEAT[64]()	Specification : SPECN. NO. JSS 9330-05	C	Nonestab
2) 6410900110 INSERT DETAIL NO.67 FOR 125 MM HEAT[64]()	Specification : MATERIAL SPECIFICATION GOST. 20437-75 OR IND/ME/951 (PROV) GRADE "A".	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) O RING 71 X 1 8 PART NO 6413211 LF 2013999912 Description : O RING 71 X 1 8 PART NO 6413211 LF 2013999912()	Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961	R	Nonestab
2) O RING 71 X 1 65 PART NO 6413243 LF 2013999913 Description : O RING 71 X 1 65 PART NO 6413243 LF 2013999913()	Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962	R	Nonestab
3) O RING 71 X 1 6 PART NO 6413232 LF 2013999911 Description : O RING 71 X 1 6 PART NO 6413232 LF 2013999911()	Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956	R	Nonestab
4) O RING 26 X 1 2 PART NO 6439353 LF 2013999908 Description : O RING 26 X 1 2 PART NO 6439353 LF 2013999908()	Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959	R	Nonestab
5) O RING 67X2 5 PART NO 6413251 LF 2013999907 Description : O RING 67X2 5 PART NO 6413251 LF 2013999907()	Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958	R	Nonestab
6) O RING 25 1X1 6 PART NO 6416337 LF 2013999903 Description : O RING 25 1X1 6 PART NO 6416337 LF 2013999903()	Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954	R	Nonestab
7) O RING 28 X 2 6 PART NO 6413250 LF 2013999906 Description : O RING 28 X 2 6 PART NO 6413250 LF 2013999906()	Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957	R	Nonestab
8) O RING 30X2 PART NO 6413212 LF 2013999901 Description : O RING 30X2 PART NO 6413212 LF 2013999901()	Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Cable Factory Chandigarh

Name	Specification	Use	Status
1) Phenolic Moulded Components()	As per specification	R	Estab.
2) Rubber & Plastic Components()	As per specification	R	Estab.

Category : P
Grade : III
Size : S

1) Ordnance Cable Factory Chandigarh

Name	Specification	Use	Status
1) SPOOL PLASTIC TO HOLD 55 METERS OF CABLE[70]()	Specification : SPOOL PLASTIC TO HOLD 55 METERS OF CABLE DRG. NO. OCF SK 1087-B	C	Nonestab

Category : P
Grade : III
Size :

1) Gun Carriage Factory

Name	Specification	Use	Status
1) INSULATION SLEEVING ELECTRICAL[90]()	Specification : ISULATION SLEEVING ELECTRICAL	C	Nonestab
2) INSULATION SLEEVING ELECTRICAL TO DRG NO 5970 002812[90]()	Specification : INSULATION SLEEVING ELECTRICAL TO DRG.NO.5970-002812.	C	Nonestab

Category : p
Grade : 3
Size : S

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9080079689 PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038[90]()	Specification : PACKING PREFORMED OR PACKING TO DS CAT NO 5330 382979 SHT 1 TO 4 IFL 8038	C	Nonestab
2) 9080079690 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037[90]()	Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382978 SHT 1 TO 4 IFL 8037	C	Nonestab
3) 9080079691 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039[90]()	Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382980 SHT 1 TO 4 NOTE RUBBER MIXED CLAUSE AS PER CQA ME KIRKEE CODE OF PRACTICE LATEST ISSUE IFL 8039	C	Nonestab
4) 9080079692 PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040[90]()	Specification : PACKING PREFORMED OR PACKING TO D S CAT NO 5330 382981 SHT 1 TO 4 IFL 8040	C	Nonestab
5) 9080079695 PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4[90]()	Specification : PACKING PREFORMED TO DS CAT NO 5305 014097 SHT 1 TO 4	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6120909014 BLOCK EBONITE MOULDED PLASTIC BLACK[61]()	Specification : IS:6693	R	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6120909501 BASE METALLIC FOR SCCC 125 MM AMMN[61]()	Specification : BASE TO CQA(A) DRAWING NUMBER 3-026892, DETAIL 1, DC-37240-ADATED:17-12-2009.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) O RING LF 9911357869[99]()	Specification : "O" RING 71*1.65TO DRG.NO.TRD122263	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

Name	Specification	Use	Status
1) SEALING RING TO DRG NO TRD 1 2 2246 LF 9911357874[99]()	Specification : SEALING RING TO DRG.NO.TRD-1-2-2246.	C	Nonestab
2) O RING LF 6170444630[61]()	Specification : 'O' RING 74.2 X 5.7 TO DRG NO. TRD-845 a.	C	Nonestab
3) SET CONSISTING OF 3 RUBBER COMPONENTS LF 9911356367[99]()	Specification : SET CONSIST OF 3 COMPT. (1) GASKET TO DRG NO. 4-26941-014 DC NO 36761-A DT 1/6/01 (2) GASKET TO DRG.NO 4-26941-016 DC NO.36761A DT 1/6/01 (3) SEALING RING TO DRG NO 4-26941-009 DC NO 36761A DT 1/6/01 MATERIAL FOR ABOVE ITEM 1-3 SPCEN:IND/	C	Nonestab
4) O RING LF 9911357860[99]()	Specification : DRG.NO. TRD-1-2-2261	C	Nonestab
5) O RING LF 2013200384[20]()	Specification : DRG.NO. F1301-024240-B DC NO. 36345-A DT. 29/10/97 MATERIAL SPECN: IND/ME/884 (PROV.)	C	Nonestab
6) O RING 67X2 5 MM TO DRG NO 6413251 LF 9911357872[99]()	Specification : DRG.NO. TRD-1-2-2248	C	Nonestab
7) O RING 78X2 LF 2013436144[20]()	Specification : 'O' RING 78X2 (2013436144)	R	Nonestab
8) O RING 30X2 DRG NO TRD 1 2 2276 LF 9911357904[99]()	Specification : "O" RING 30X2 TO DRG.NO.TRD-1-2-2276.	R	Nonestab
9) O RING 26 X 1 2 PART NO 6439353 LF 2013999908[20]()	Specification : O-RING 26 X 1.2 PART NO.6439353 DRG.NO.TRD-1-1-2959	R	Nonestab
10) O RING 67X2 5 PART NO 6413251 LF 2013999907[20]()	Specification : O-RING 67 X 2.5 PART NO.6413251 DRG.NO.TRD-1-1-2958	R	Nonestab
11) O RING 28 X 2 6 PART NO 6413250 LF 2013999906[20]()	Specification : O-RING 28X2.6 PART NO.6413250 DRG.NO.TRD-1-1-2957	R	Nonestab
12) O RING 25 1X1 6 PART NO 6416337 LF 2013999903[20]()	Specification : O-RING 25.1X1.6 PART NO.6416337 DRG.NO.TRD-1-1-2954	R	Nonestab
13) O RING 30X2 PART NO 6413212 LF 2013999901[20]()	Specification : O-RING 30X2 PART NO.6413212 DRG.NO.TRD-1-1-2953	R	Nonestab
14) O RING 71 X 1 65 PART NO 6413243 LF 2013999913[20]()	Specification : O-RING 71 X 1.65 PART NO.6413243 DRG.NO.TRD-1-1-2962	R	Nonestab
15) O RING 71 X 1 8 PART NO 6413211 LF 2013999912[20]()	Specification : O-RING 71 X 1.8 PART NO.6413211 DRG.NO.TRD-1-1-2961	R	Nonestab
16) O RING 71 X 1 6 PART NO 6413232 LF 2013999911[20]()	Specification : O-RING 71 X 1.6 PART NO.6413232 DRG.NO.TRD-1-1-2956	R	Nonestab
17) O RING LF 9911357865[99]()	Specification : "O" RING 71*1.6 DRG.NO.TRD-122259	C	Nonestab
18) O RING LF 9911357868[99]()	Specification : "O" RING 71*1.8 DRG.NO.TRD-122260	C	Nonestab
19) O RING LF 9911357869[99]()	Specification : "O" RING 71*1.65TO DRG.NO.TRD122263	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6410900330 BASE TO DRG.4-025998 081 125MM HEAT[64]()	Specification : SPECN. NO. JSS 9330-05	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) Assembly Centre Contact for RGB 60[03]()	Specification : ASSY CENTRE CONTACT FOR RGB-60 AS PER DRG.NO:NASK 1068/8, NASK 1068/8/1, NASK 1068/8/2, NASK 1068/8/3. (L..F No. 0126701688)	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Heavy Alloys Penetrator Project

Name	Specification	Use	Status
1) ASSY CONTACT FOR RGB 60 AS PER DRG NO NASK 1068 6[01]()	Specification : ASSY CONTACT FOR RGB-60 AS PER DRG.NO: NASK 1068/6	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6419000056 FIBRE RING DTL NO 078 FOR 125MM AMN[64]()	Specification : RING TO DRG. NO. 4-024610 DETAIL NO. 078 DC NO.36608-A FOR125MM AMMUNITION.	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SLIPPING RING PART NO 5212095 LF 9911358418 Description : SLIPPING RING PART NO 5212095 LF 9911358418()	Specification : SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) O Ring 74point5x3 mm TO DRG NO TRD 845a LF 6170444650 Description : O Ring 74point5x3 mm TO DRG NO TRD 845a LF 6170444650()	Specification : O Ring 74.5x3mm TO DRG NO TRD 845a	R	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) O RING 67point5 X 2point4 lf 2013436145 Description : O RING 67point5 X 2point4 lf 2013436145()	Specification : "O" RING 67.5 X 2.4 TO DRG NO F-1301-043760-D DC NO 36783-A DT 19/9/01 NEOPRENE RUBBER SPECN:-IND/ME/884:2015 COMPOUNDNO.C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO.5403-ME DATED- 01/02/2016.COMPATIBLE WITH RDX,TNT.TO SEPCN F-1301-907400DDATE	R	Nonestab

Category : p
Grade : 3
Size : S

1) Opto Electronic Factory

Name	Specification	Use	Status
1) EYE SHIELD TO DRG No.BL8647007[9001100409]()	Specification : AS PER DRAWING	C	Estab
2) FRAME TO DRG. NO. BL7804255 (LF-7420113028)[7420113028]()	Specification : AS PER DRAWING	C	Estab
3) WASHER TO DRG. NO. AF8942300 (LF-9024111598)[90]()	Specification : AS PER DRAWING	C	Estab
4) SEALING RING TO DRG. No. OLF/STD/117 (LF-7420214011)[74]()	Specification : AS PER DRAWING	C	Estab
5) SHOCK ABSORBER TO DRG. No. BSH8639022 (LF-7434014001)[74]()	Specification : AS PER DRAWING	C	Estab
6) EYE SHIELD TO DRG. No. BSH8647141 (LF-9927090476)[99]()	Specification : AS PER DRAWING	C	Estab
7) RING TO DRG. No. 14508686945 (LF-9927094488)[99]()	Specification : AS PER DRAWING	C	Estab
8) RING TO DRG NO AF8683898 LF 7420414003[74]()	Specification : AS PER DRAWING	C	Estab
9) BUSHING TO DRG NO AF8220467 LF 7432414001[74]()	Specification : AS PER DRAWING	C	Estab
10) BUSHING TO DRG NO AF8220575 LF 7432414008[74]()	Specification : AS PER DRAWING	C	Estab
11) GASKET TO DRG NO AF8683997 LF 7432415001[74]()	Specification : AS PER DRAWING	C	Estab
12) GASKET TO DRG NO Y7596269 LF 9023101157[90]()	Specification : AS PER DRAWING	C	Estab
13) RING TO DRG NO AF8683898 14 LF 9927086177[99]()	Specification : AS PER DRAWING	C	Estab
14) GASKET TO DRG NO BTS8683344 LF7421014004[74]()	Specification : AS PER DRAWING	C	Estab
15) RING TO DRG NO AF8683535 LF7432414007[74]()	Specification : AS PER DRAWING	C	Estab
16) GASKET TO DRG NO AL8683174 LF 9927091007[99]()	Specification : AS PER DRAWING	C	Estab
17) PACKING TO DRG NO BL7841655 LF 9001110753[90]()	Specification : AS PER DRAWING	C	Estab
18) GASKET TO DRG NO AF8684036 LF 7432414006[74]()	Specification : AS PER DRAWING	C	Estab
19) INSERT TO DRG NO AF8214167 LF 7432414009[74]()	Specification : AS PER DRAWING	C	Estab
20) Gur Mutt LF 7590100599[75]()	Specification : OLF/MISC/599	C	Estab
21) Ring to drg No AF8683898 13 LF 9927086176[99]()	Specification : As per drg.	C	Estab
22) SPACING RING TO DRG NO BTS8683349 LF 7421014005[74]()	Specification : AS PER DRG	C	Estab
23) PROTECTOR LF 9023101592[90]()	Specification : AS PER DRG	C	Estab
24) GASKET TO DRG NO 14547840697 01 LF 9927089046[99]()	Specification : AS PER DRG	C	Estab
25) GASKET TO DRG NO BL7840298 LF 7420115021[74]()	Specification : AS PER DRG	C	Estab
26) ASSY OF CASE AND COVER LF 7432113004[74]()	Specification : AS PER DRG	C	Estab
27) BUSH TO DRG NO BL7860686 LF 9001200254[90]()	Specification : AS PER DRG	C	Estab
28) PACKING TO DRG NO BL9364584 LF 9001100189[90]()	Specification : AS PER DRG	C	Estab
29) GASKET TO DRG NO BTS8683343 LF 7421014003[74]()	Specification : AS PER DRG	C	Estab
30) WASHER TO DRG NO BL7854124 LF 7420113045[74]()	Specification : AS PER DRG	C	Estab
31) RING TO DRG NO BL9362014 LF 9001100197[90]()	Specification : AS PER DRG	C	Estab
32) RING RUBBER MOULD TO DRG NO BL9362687 05 LF 7590100045[75]()	Specification : AS PER DRG	C	Estab

Category : p
Grade : Grade III
Size : S

1) Gun and Shell Factory

Name	Specification	Use	Status
1) MOULDING OF FIRING PIN ASSY TO DRG NO 9A 621 05 020[91]()	Specification : AS PER DRAWING	C	Nonestab
2) MOULDING OF LEAD CONTACT ASSY TO DRG NO 9 A 621 05 030[91]()	Specification : AS PER DRAWING	C	Nonestab

Category : p
Grade : Grade III
Size : S

1884

ASHOKA MOULDERS PVT. LTD.
6A, NICCO HOUSE 2-HARE STREET KOLKATA W.B.
PIN1 : 700001
Phone No. : 9831888859

AACCA1002F

Download

1) Small Arms Factory

[ENR Registration]

Name	Specification	Use	Status
1) NUT ELEVATING FOR MONOPOD ASSEMBLY OF LMG Description : NUT ELEVATING FOR MONOPOD ASSEMBLY OF LMG()	Specification : NUT ELEVATING TO DS CAT NO-5310-024602 DC(I) NO. 26955-SA DT. 05.10.16 FOR MONOPOD ASSEMBLY.	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021 Description : STEEL ROD 21MM IS4431 GR 14 C14 S14 LF 0111000021()	Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS.	R	Nonestab

Category : s
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) STEEL STRIP 82 X 0 8MM BS1449 IS513DD lf 0121060266 Description : STEEL STRIP 82 X 0 8MM BS1449 IS513DD lf 0121060266()	Specification : STEEL STRIP 82+/-0.5 MM WIDE X 0.8+/-0.03 MM THICK TO SPECN:IS-513-TYPE-DD OR BS-1449-PT-I-CS-3 SEC-2.	R	Nonestab
2) SPRING 5209544 FOR HEAT 551 LF 9911357927 Description : SPRING 5209544 FOR HEAT 551 LF 9911357927()	Specification : SPRING TO DRG NO.301100269.	C	Estab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) PHENOLIC MOULDING OF BODY CONTACT LF 9911356304 Description : PHENOLIC MOULDING OF BODY CONTACT LF 9911356304()	Specification : PHENOLIC MOULDING FOR BODY & CONTACT TO DRG NO:OST-B84-410- 78 MOULDED COMPONENTS TO SATISFY PARAMETER OF TESTING ATSHEET NO: 4,5 & 6 OF OST-B84-410:78 MOULDING MATERIAL TOSPECN:- SP-16 OF IPL.	C	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) BLANK FOR AFT CLOSURE 751 LF 9911358748 Description : BLANK FOR AFT CLOSURE 751 LF 9911358748()	Specification : BLANK FOR AFT CLOSURE 751 TO SPEC NO 00814599 MATERIAL EN-AW 7075 TO DRG NO.304200410 TO PART NO.4103408	R	Nonestab
2) BLANK FOR PLUNGER FOR 751 LF 9911358749 Description : BLANK FOR PLUNGER FOR 751 LF 9911358749()	Specification : BLANK FOR PLUNGER FOR 751 TO SPEC NO. 00814596 MATERIAL EN-AW 7075 TO DRG NO. 304101470 TO PART NO 06417888	R	Nonestab
3) BLANK FOR CARBON NOZZAL LF 9911358750 Description : BLANK FOR CARBON NOZZAL LF 9911358750()	Specification : BLANK FOR CARBON NOZZAL TO SPEC. NO. 00813350 MATERIAL MERSEN GRADE 2114 TO DRG. NO. 304066482 TO PART NO. 06413206	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) VALVE PART NO 404038806 LF 9911358407 Description : VALVE PART NO 404038806 LF 9911358407()	Specification : VALVE PART NO. 404038806 TO OEM DRG.NO.304074199 TRD.DRG.NO.3.2.2547	R	Nonestab
2) MANTLE PART NO 5211891 LF 9911358398 Description : MANTLE PART NO 5211891 LF 9911358398()	Specification : MANTLE PART NO.5211891 TO OEM DRG.NO.304101466/TRD.DRG.NO. 2.2.2401	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SUPPORTRING RING PART NO 5211870 LF 9911358417 Description : SUPPORTRING RING PART NO 5211870 LF 9911358417()	Specification : SUPPORTING RING PART NO. 5211870 TO OEM DRG.NO.304094939/ TRD.DRG.NO 2.2.2371	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) WAVE SPRING WASHER 2013999902 Description : WAVE SPRING WASHER 2013999902()	Specification : WAVE SPRING WASHER PART NO 6414691 TO OEM DRG NO 304069069/TRD DRG NO 2.2.2541	R	Nonestab

Category : p
Grade : 3
Size : S

1) Gun and Shell Factory

[ENR Registration]

Name	Specification	Use	Status
1) SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B Description : SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B()	Specification : SEMI MACHINED FORGED PROJECTILE BODY FOR 84 MM TPT ROUND TO DRG. NO F-2277 B	C	Estab
2) FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E Description : FORGED BLANK FOR PROJECTILE BODY TO OFAJ DRG NO F 495E()	Specification : AS PER DRG	C	Estab
3) BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011 Description : BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011()	Specification : BLANK FOR DISTANCE TUBE TO TO GSF DRG. NO:F-1947 DCI NO. 37282-A DT. 25.05.2011	C	Estab
4) FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY) Description : FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY)()	Specification : FORGED BODY (FRONT PART) TO OFAJ DRG. NO. F-9G FOR 81 mm MORTAR BOMB (EMPTY BODY)	C	Estab
5) PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C Description : PROOF MACHINED BODY FOR 51 MM HE to DRG. NO: SK-8345/C()	Specification : DRG. NO. SK-8345/C	C	Estab
6) CAP TO SK NO OTF PG 002 IN FC Description : CAP TO SK NO OTF PG 002 IN FC()	Specification : AS PER DRG.	C	Estab
7) Disc to Part No QX 336 for Fuze 162 Mk-8/Mk-9 Description : Disc to Part No QX 336 for Fuze 162 Mk-8/Mk-9()	Specification : AS PER DRAWING	C	Estab
8) STOP DETENT TO DRG NO IQX 1002 Description : STOP DETENT TO DRG NO IQX 1002()	Specification : AS PER DRG.	C	Estab

Category : dp
Grade : 2
Size : S

1) Ordnance Factory Ambajhari

[ENR Registration]

Name	Specification	Use	Status
1) COPPER STRIP TO SPECN IS14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS191 2007 SIZE 0 POINT18 MINUS 0 POINT 02 MM THICK AND 22 PLUS 0 POINT 5 MM WIDE Description : COPPER STRIP TO SPECN IS14811 2000 CONDITION HD GRADE CU CATH 2 TO SPECN IS191 2007 SIZE 0 POINT18 MINUS 0 POINT 02 MM THICK AND 22 PLUS 0 POINT 5 MM WIDE()	Specification : COPPER STRIP TO SPECN.IS:14811:2000. CONDITION HD GRADE CU CATH - 2 TO SPECN IS:191-2007 SIZE:-0.18-0.02 MM THICK X 22 + 0.5 MM WIDE	R	Estab

Category : dp
Grade : 3
Size : S

1) Metal and Steel Factory

[ENR Registration]

Name	Specification	Use	Status
1) HOT ROLLED HEAT TREATED PEELED OR MACHINED AND UT PASSED STEEL ROD Description : HOT ROLLED HEAT TREATED PEELED OR MACHINED AND UT PASSED STEEL ROD()	Specification : HOT ROLLED HEAT TREATED PEELED/MACHINED & UT PASSED STEEL ROD TO SIZE 71+/-0.1MM DIA X 2-3 MTR LENGTH MAINTAINING ECCENTRICITY/BEND NOT MORE THAN 0.5 MM IN 1000 MM LENGTH TO SPECN GOST B 19032-73 STEEL GRADE II IOA FOR MAKING OF STEEL BLA	P	Estab

Category : s
Grade : 3
Size : O

1) Ordnance Factory Khamaria

[ENR Registration]

Name	Specification	Use	Status
1) SLIPPING RING PART NO 5212095 LF 9911358418 Description : SLIPPING RING PART NO 5212095 LF 9911358418()	Specification : SLIPPING RING PART NO.5212095 TO OEM DRG.NO.304101480/ TRD.DRG.NO. 2.2.2408	R	Nonestab

Category : p
Grade : 3
Size : S

1) Ordnance Factory Kanpur

[ENR Registration]

Name	Specification	Use	Status
1) Pipe Disc Description : Pipe Disc()	Specification : Drg. No. SK-9366	C	Estab
2) FORGED PROOF MACHINED BLANK FIN CYLINDER Description : FORGED PROOF MACHINED BLANK FIN CYLINDER()	Specification : FORGED PROOF MACHINED BLANK FIN CYLINDER TO DRG. NO. SK- 8928/D	C	Estab

Category : p
Grade : 2
Size : S

1) Gun and Shell Factory

[Deemed Registration]

Name	Specification	Use	Status
1) CAP QX 438 WITHOUT SURFACE TREATMENT and EMBOSSING DC NO 37326 A Description : CAP QX 438 WITHOUT SURFACE TREATMENT and EMBOSSING DC NO 37326 A()	Specification : CAP QX-438 WITHOUT SURFACE TREATMENT & EMBOSSING DC NO.37326-A	C	Estab

Category : p
Grade : 3
Size : S

1885

PUNJ LLOYD LIMITED
Plot No. Part of L1 Industrial Area Ghirongi Malanpur BHIND Madhya Pradesh
PIN1 : 477117
Phone No. : 2620286
GSTIN : 23AAACP0305Q1ZM

DELP08758B

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) GUARD BLANCING GEAR RIGHT TO DRG NO BOF 5049700[90]()	Specification : GUARD BLANCING GEAR RIGHT TO DRG NO BOF 5049700	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) PICKET ASSY DRG 3014629[90]()	Specification : PICKET ASSY DRG 3014629	C	Nonestab
2) MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS[90]()	Specification : MOD ENGINE HOUSING TO INTEGRATE CUMMINS ENGINE FOR 155MM FH GUNS	R	Nonestab
3) 9081005803 GUIDE TO DRG NO GCF 50 40800[90]()	Specification : GUIDE TO DRG.NO.GCF/50/40800 (REF.DRG.NO.4076054)	C	Nonestab
4) 9081005804 GUIDE TO DRG NO GCF 50 40801[90]()	Specification : GUIDE TO DRG.NO.GCF/50/40801 (REF.DRG.NO.4076056).	C	Nonestab
5) 9081005805 GUIDE TO DRGNO GCF 50 40802[90]()	Specification : TO DRG.NO.GCF/50/40802 (REF.DRG.NO.4076063)	C	Nonestab
6) 9081005806 GUIDE TO DRG NO GCF 50 40803[90]()	Specification : GUIDE TO DRG.NO.GCF/50/40803 (REF.DRG.NO.4076066).	C	Nonestab
7) 9081001534 CASTOR WHEEL ARM LEFT PT NO 1130430[90]()	Specification : CASTOR WHEEL ARM LEFT PT NO 1130430.	C	Nonestab
8) 9081001535 CASTOR WHEEL ARM RIGHT PT NO 1130431[90]()	Specification : CASTOR WHEEL ARM RIGHT PT NO1130431	C	Nonestab
9) 9081001538 COLLAPSIBLE YOKE TO PART NO 6387168[90]()	Specification : 9081001538 COLLAPSIBLE YOKE TO PART NO 6387168	C	Nonestab
10) 9081005205 DRAWBAR TO PT NO 1143440[90]()	Specification : DRAWBAR TO PT.NO.1143440, AS PER ANNEXURE NO. DHANUSH/ 1143440/2017.	C	Nonestab
11) 9081005682 LOADING PENDULAM TO PART NO 1145142[90]()	Specification : LOADING PENDULAM TO PART NO.1145142 (EXCLUDING HYDRAULIC CYLINDER LOADING TRAY-1145452)	C	Nonestab
12) EJECTOR PROJECTILE 3A TO DS CAT NO 1015 000819[90]()	Specification : EJECTOR PROJECTILE 3A TO DS CAT NO 1015 000819	C	Nonestab
13) 9081008222 SET OF TRAIL BODY LEFT and RIGHT[90]()	Specification : SET OF TRAIL BODY (LEFT & RIGHT )TO DRG.NO.1145181 & 1145186	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081001242 PROTECTIVE GEAR PART NO 1156272D[90]()	Specification : PROTECTIVE GEAR AS PER THE DESCRIPTION AND BILL OF MATERIAL (enclosed) PART NO 1156272D.	C	Nonestab
2) 9081005825 BAR LEFT WELD DRG 1132565 4072166[90]()	Specification : BAR LEFT WELD TO PART NO.1132565/4072166	C	Nonestab
3) 9081005826 CONTROL LEVER STOP TO PART NO 11327[90]()	Specification : CONTROL-LEVER STOP TO PART NO.11327	C	Nonestab
4) 9081005827 CTRL LVR STOP TO PART NO 1133275[90]()	Specification : CONTROL-LEVER TO PART NO.1133275	C	Nonestab
5) 9081005828 LINKAGE SYSTEM TO PART NO1148855[90]()	Specification : LINKAGE SYSTEM TO PART NO.1148855.	C	Nonestab
6) 9081005846 BAR RIGHT WELD DRG 1132566 4072167[90]()	Specification : BAR RIGHT WELD TO PART NO.1132566/4072167	C	Nonestab
7) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]()	Specification : BUFFER ASSY.TO DRG.1133736/5163822	C	Nonestab
8) 9081002984 TOWING EYE TO DRG NO 3048547[90]()	Specification : TOWING EYE TO DRG.NO.3048547	C	Nonestab
9) 9081005816 PLATFORM90 LEFT TO PART NO 1147127[90]()	Specification : PLATFORM LEFT TO PART NO.1147127	C	Nonestab
10) 9081005817 HOUSING TO PART NO 5161898[90]()	Specification : HOUSING TO PART NO.5161898.	C	Nonestab
11) 9081005822 HANDLE RIGHT TO PART NO 4073014[90]()	Specification : HANDLE RIGHT TO PART NO.4073014.	C	Nonestab
12) 9081005835 COVER TO PART NO 5141876[90]()	Specification : COVER TO PART NO.5141876	C	Nonestab
13) 9081005837 HANDLE LEFT TO PART NO 4072731[90]()	Specification : HANDLE LEFT TO PART NO.4072731	C	Nonestab
14) 9081005839 PISTON TO PART NO 5161864[90]()	Specification : PISTON TO PART NO.5161864	C	Nonestab
15) 9081005842 PLATFORM RIGHT TO PART NO 1147166[90]()	Specification : PLATFORM RIGHT TO PART NO.1147166	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 194DL 0248[90]()	Specification : OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248	C	Nonestab
2) OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541 3020061[90]()	Specification : OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) STAY BOTTOM LEFT TO DRG NO 1015 000695[90]()	Specification : STAY BOTTOM (LEFT) TO DRG. NO. 1015-000695	C	Nonestab
2) STAY BOTTOM RIGHT TO DRG NO 1015 000706[90]()	Specification : STAY (BOTTOM RIGHT) TO DRG. NO. 1015-000706	C	Nonestab
3) OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 194DL 0248[90]()	Specification : OUTER CASE RIGHT ASSYEMBLY TO DRG 164L7 0022 / 194DL 0248	C	Nonestab
4) OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541 3020061[90]()	Specification : OUTER CASE LEFT ASSYEMBLY TO DRG NO 2010541/3020061	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) LAYERS STATION ASSEMBLY PART NO 1156269[90]()	Specification : LAYER STATION ASSEMBLY PART NO.1156269	C	Nonestab
2) TRAIL RIGHT WELDING TO DRG NO DS CAT NO 1015 000756 SHT 2[90]()	Specification : TRAIL RIGHT WELDING TO DRG NO DS CAT NO 1015 000756 SHT 2	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865[90]()	Specification : MACHINED CASTING BEARING HOUSING AS PER GCF DRG NO GCF 50 40865	C	Nonestab
2) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878[90]()	Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40878	C	Nonestab
3) MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879[90]()	Specification : MACHINED CASTING GABLE AS PER GCF DRG NO GCF 50 40879	C	Nonestab
4) MACHINED CASTING TRAIL BEARING LEFT AS PER GCF DRG NO GCF 50 40859[90]()	Specification : MACHINED CASTING TRAIL BEARING LEFT AS PER GCF DRG NO GCF 50 40859	C	Nonestab
5) MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856[90]()	Specification : MACHINED CASTING HOUSING RIGHT AS PER GCF DRG NO GCF 50 40856	C	Nonestab
6) MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858[90]()	Specification : MACHINED CASTING TRAIL BEARING RIGHT AS PER GCF DRG NO GCF 50 40858	C	Nonestab
7) MACHINED CASTING AS PER GCF DRG NO GCF 50 40891[90]()	Specification : MACHINED CASTING AS PER GCF DRG NO GCF 50 40891	C	Nonestab
8) MOUNTING BODY TO DRG NO 1142716[90]()	Specification : MOUNTING BODY TO DRG.NO. 1142716	C	Nonestab
9) BASE PLATE AS PER DRG NO 3052701[90]()	Specification : BASE PLATE AS PER DRG NO 3052701	C	Nonestab
10) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40863	C	Nonestab
11) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40864	C	Nonestab
12) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40892	C	Nonestab
13) MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889[90]()	Specification : MACHINED CASTING AS PER BEARING HOUSING GCF DRG NO GCF 50 40889	C	Nonestab

Category :
Grade : Grade III
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) LINKAGE SYSTEM ASSY. OF DHANUSH()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
2) CASSETTE ASSY. OF DHANUSH()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
3) PROTECTIVE COVER OF DHANUSH (ONLY FOR METALLIC COVER TO MANUFACTURED THROUGH MACHINING ROUTE)()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
4) BRACKET OF DHANUSH (ONLY FOR METALLIC BRACKET TO BE MANUFACTURED THROUGH MACHINING ROUTE)()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
5) COVER OF DHANUSH (ONLY FOR METALLIC COVER TO BE MANUFACTURED THROUGH MACHINING ROUTE)()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
6) CRADLE CLAMP OF DHANUSH()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
7) LAYER SEAT OF DHANUSH()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
8) LOADING DEVICE OF DHANUSH()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
9) ENGINE HOUSING OF DHANUSH()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
10) LOADING SYSTEM()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.

Category : DP
Grade : II
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) 9081001814 LOADING TRAY TO ART NO 1145143[90]()	Specification : LOADING TRAY TO ARTICLE NO. 1145143.	C	Nonestab

Category : p
Grade : 3
Size : L

1) Gun Carriage Factory

Name	Specification	Use	Status
1) PRIMER MAGAZINE ASSEMBLY NO 4091303D[90]()	Specification : PRIMER MAGAZINE ASSEMBLY NO 4091303D	C	Nonestab
2) TUBE ASSY METAL TO DRG NO 4710 040701[90]()	Specification : TUBE ASSY METAL TO DRG. NO. 4710-040701	C	Nonestab

Category : p
Grade : 3
Size : L

1886

Raajratna Ventures Ltd
Phoenix 1402 14th floor Vijay cross raods to commerce six roads Navrangpura Ahmedabad-390009 Gujarat, India.Tel: +91-79-2756 1915 / 16 / 17 Ashram road Ahmedabad Gujarat
PIN1 : 380014
Phone No. : 27561915
GSTIN : 24AACCR7873B1ZG

AHMR03159C

Download

1) Ordnance Factory Chanda

Name	Specification	Use	Status
1) 6334100726 STAINLESS STEE NUT M4 FOR PINKA RKT[63]()	Specification : IS-1367	C	Nonestab

Category :
Grade : Grade III
Size : M

1887

Phonix Forge Pvt.Ltd.
No. B-20, Bommasandra Industrial Area, Anekal Taluk, Bangalore Karnataka
PIN1 : 560099
Phone No. : 080-7831514
GSTIN : 29AABCP2360G1ZJ

BLRP01287G

Download

1) Vehicle Factory Jabalpur

[Deemed Registration]

Name	Specification	Use	Status
1) Lay shaft-S3344411, Input shaft-PS3344511[As per component]()	As per component	C	Established
2) Output shaft Rear-PS3344311, Output shaft Front-PS3344611[As per component]()	As per component	C	Established
3) Spur gear-PS 1044011, Gear on LS/Spur gear-PS1645011, Spur gear/Input gear-S1653711[As per component]()	As per component	C	Established

Category : P
Grade : I
Size : S

1) Vehicle Factory Jabalpur

Name	Specification	Use	Status
1) Forging Blank for Front Casing for Gun Port Upgraded MPV 4X4 Drg No F 2705 57 31[90]()	Specification : Drg No. F-2705-57-31.	C	Nonestab
2) Forging Blank for Rear Casing Gun Port Upgraded MPV 4X4 Material C45 IS 2004 Drg No F 2706 57 31 A[90]()	Specification : Drg. No. F-2706-57-31/A.	C	Nonestab
3) Forging Blank for spacer Door for Gun port Upgraded MPV 4X4 Drg No F 2672 57 31 A[90]()	Specification : Drg No. F-2672-57-31/A.	C	Nonestab
4) Forging Blank for Ball Handle for Gun port Upgraded MPV 4X4 Drg No F 2742 57 31 A[90]()	Specification : Drg No. F-2742-57-31/A.	C	Nonestab

Category :
Grade : Grade III
Size : S

1888

East West Tanners
98/34, Suite No.4 Nazir Bagh Kanpur Uttar Pradesh
PIN1 : 208001
Phone No. : 2970606
GSTIN : 09AAFPU6789H1ZU

KNEP01459D

Download

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Bag Kit Universal (Mark-II)[21]()	Specification : SPCN.-S/2532/Bag Kit Universal OG/TC-6(a)	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF JCD AND TCD IAL 250 GSM IN SET[17]()	Specification : OCFAv/GARMENT/001(b)AND OCFAv/GARMENT/002(b) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 250 GSM INSET	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF SUIT WINTER[21]()	Specification : AS PER RELEVANT CLAUSE OF SPECIFICATION IAFS: 01042:2017 -OCF, SHAHAJAHANPUR	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Smock Denison[21]()	Specification : Fabrication of Smock Denison Spcn: IND/TC/4675 As per relevant clause of specification As per relevant clause of specification	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo[21]()	Specification : Fabrication of Overall Combination Disruptive Pattern with Indian Army Logo Provisional Specification No. S/2764/OC Army Logo/TC-15 As per relevant clause of specification.	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of coat Extreme Cold Climate[21]()	Specification : IND/TC/4587 (d) & Approved samples	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Shirt Mans Angola Drab PolyWool Modified Pattern 2012[21]()	Specification : IND/TC/4552 (M) & Approved Sample	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF JCD AND TCD IAL 220 GSM IN SET[17]()	Specification : OCFAv/GARMENT/001(c)AND OCFAv/GARMENT/002(c) SPECIFICATION " FABRICATION OF JACKET & TROUSER COMBAT PC DIS. WITH INDIAN ARMY LOGO WITH 220 GSM INSET	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Jacket Wind Cheater[21]()	Specification : FABRICATION OF JACKET WIND CHEATER SPCNS: - AS PER SPECIFICATION NO. IND/TC/4677 & AMENDMENT NO. 1	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo[21]()	Specification : Fabrication of Coat Combat Disruptive Detachable Lining with Indian Army Logo S/2594/CCD Army Logo/TC-15 & Approved sample	E	Estab
2) Fab of Trousers Wind Cheater[21]()	Specification : Fab. of Trousers Wind Cheater. As per Specification No. IND/TC/4678	R	Estab
3) Fabrication of Ground Sheet TPO OG[21]()	Specification : Fabrication of Ground Sheet TPO OG Specification - JSS 8305-35:2014	R	Estab
4) FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI[21]()	Specification : FABRICATION OF NET MOSQUITO ROUND MESH POLYESTER FLAME RETARDENT KHAKI AS PER SPECIFICATION NO. JSS 7210-29:2016, REV. NO. 1 & AS PER SAMPLE HELD WITH OCFS.	E	Estab
5) FABRICATION OF BAG WATER PROOF[21]()	Specification : FABRICATION OF BAG WATER PROOF AS PER SPECIFICATION NO. JSS:4220-03:2011 & AS PER SAMPLE HELD WITH OCFS.	E	Estab
6) FABRICATION OF COAT ECC IMP VER[21]()	Specification : FABRICATION OF COAT ECC IMP VER FABRICATION (200001 - TAILOR SKILLED MACHINE - I, 200008 - TAILOR SKILLED HAND - I, 200015 - SERGING & 200016 - METAL EYELET FIXING) OF COAT ECC IMPROVED VERSION, AS PER SPECIFICATION NO. S/3558/A/TC-15/C	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF ECAD PARA COMPLETE WITH SPECIAL MACHINE[21]()	Specification : FABRICATION OF ECAD PARACHUTE 8.5 M SD MADE WITH BLENDED FABRIC (67:33 ) POLYESTER AND COTTON AND 100% POLYESTER TAPE COMPLETE WITH PACK. WHERE SPECIAL MACHINE (DOUBLE NEEDLE STITCHING MACHINE, FOUR NEEDLE STITCHING MACHINE AND ZIGZAG MAC	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) Fabrication of Shirt Plain weave PV Dope Dyed OG[21]()	Specification : IND/TC/4698(b)	R	Estab
2) Fabrication of Trouser Plain weave PV Dope Dyed OG[21]()	Specification : IND/TC/4630(m)	R	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN MODIFIED[21]()	Specification : FABRICATION OF TROUSER SERGE POLYWOOL 1973 PATTERN (MODIFIED) SPECIFICATION NO. IND/TC/4634(1) AND APPROVED SAMPLE	E	Estab
2) Fabrication of Cap Glacier[21]()	Specification : Fabrication of Cap Glacier conforming to Specification No. IND/TC/4180 (b) and Approved sample.	E	Estab
3) COMPLETE SUB ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP VER WITH ALL INPUT MATERIAL AND FABRICATION OF WIND CHEATER[21]()	Specification : COMPLETE SUB-ASSEMBLY OF OUTER AND INNER JACKET OF COAT ECC IMP. VER. (WITH ALL INPUT MATERIAL) AND FABRICATION OF WIND CHEATER AS PER COAT ECC IMP. VER. SPECIFICATION NO. S/3558/A/TC-15/COAT ECC WITH AMENDMENT NO. 1 TO 6 AND AS PER ANN	E	Estab

Category :
Grade : Grade III
Size : S

1) Ordnance Clothing Factory Shahjahanpur

Name	Specification	Use	Status
1) SUB ASSEMBLY OF WIND CHEATER FABRICATION WITH ALL INPUT MATERIAL FABRIC AND GARNITURE MATERIAL EXCEPT PLASTIC SLIDE FASTENERS[21]()	Specification : Sub-Assembly of Wind Cheater {(Fabrication With All Input Material (Fabric and Garniture Material) except Plastic Slide Fasteners} Specification No.- As per relevant clause of provisional specification No. S/3558/A/TC-15/Coat ECC with a	E	Estab

Category :
Grade : Grade III
Size : S

1889

SHIVA TECH ENGINEERING
Sr no 59/1 plot no 3 Chavisawadi Charholi sai Industrial Estate pune Maharashtra
PIN1 : 412105
Phone No. : 9764881012
GSTIN : 27ALKPG5467G1ZV

PNES29472C

Download

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) TAIL UNIT 1A FOR BOMB 81 MM[60]()	Specification : CQA(A)2308	C	Nonestab

Category :
Grade : Grade III
Size : S

1) Ammunition Factory Khadki

Name	Specification	Use	Status
1) TAIL UNIT 8A WITH CAP ARDE-1933 D-7[60]()	Specification : CQA(A) 2324	C	Nonestab

Category :
Grade : Grade III
Size : S

1890

APJ CORPORATION
C/O SHANKER POLYMERS & GENERAL INDUSTRIES, G.T. ROAD, B S ROAD INDL. AREA GHAZIABAD UTTAR PRADESH
PIN1 : 201009
Phone No. : 09810776167,09811086376
GSTIN : 09AAKFA1925E1ZO

MRTA02151C

Download

1) Ordnance Factory Muradnagar

Name	Specification	Use	Status
1) RUBBERISING OF METALLIC PIN ()	AS PER OFM SPECIFICATION	C	NOT ESTABLISHED

Category : P
Grade : II
Size : S

1891

SANDHAR TECHNOLOGIES LTD.,
PLOT NO. 13, SECTOR-44, GURGAON HARYANA
PIN1 : 122002
Phone No. : 0124-4518900
GSTIN : 06AAACS0512J2ZR

AAACS0512J

Download

1) Ordnance Factory Bhusawal

Name	Specification	Use	Status
1) BRACKET TOP FOR BOX SM-512()	AS PER SPECIFICATION & DRAWINGS	C	ESTAB.
2) SUPPORT FOR BRACKET A-2 FOR BOX SM-51()	AS PER SPECIFICATION & DRAWINGS	C	ESTAB.
3) BRACKET TOP FOR BOX SM-512()	AS PER SPECIFICATION & DRAWINGS	C	ESTAB.
4) SUPPORT FOR BRACKET A-2 FOR BOX SM-51()	AS PER SPECIFICATION & DRAWINGS	C	ESTAB.

Category : DP
Grade : I
Size : M

1892

JAYASWAL NECO INDUSTRIES LTD.
SILTARA GROWTH CENTRE BHILAI CHATTISGARH
PIN1 : 440016
Phone No. : 07721-264241
GSTIN : 22AAACJ3174F1Z0

JBPJ00355F

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) STEEL PRODUCTS()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.

Category : DP
Grade : I
Size : L

1893

SAFETY SYNDICATE
N-214, SECTOR-5, DSIIDC INDUSTRIAL AREA, BAWANA DELHI DELHI
PIN1 : 110039
Phone No. : 011277910576
GSTIN : 07ABHPS3683D1ZH

ABHPS3683D

Download

1) Ordnance Factory Dehradun

Name	Specification	Use	Status
1) LENS FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C),SHT. 4 OF 4 WITH MICRO FIBER CLEANING CLOTH OF SIZE 20 CM X 20 CM MADE OF 100% POLYESTER IN BLACK COLOUR. DETAILED SPECN. FOR LENS AS PER ANNEXURE.()	AS PER SPECIFICATION	C	Not Estab.
2) FRAME FOR GOGGLES(ALL TERRAIN) AS PER DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.2 OF 4, WITH ELASTIC TAPE INCLUDING PIN & BUCKLE(COMPLETE) DRG.NO.:CQA(GS)/PROV/GS-5/1/2012(C) SHT.3 OF 4. DETAILED SPECN. FOR FRAME & ELASTIC TAPE AS PER ANNEXURE()	AS PER SPECIFICATION	C	Not Estab.

Category : P
Grade : II
Size : S

1894

STANDARD AUTOGEARS PVT.LTD.
PLOT NO.705,INDUSTRIAL AREA, PHASE-9 MOHALI PUNJAB
PIN1 : 160062
Phone No. : 0172-5071125
GSTIN : 03AAACG8512E1Z5

AAACG8512E

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) MACHINING PART COMPONENT()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
2) SHEET METAL & FABRICATED COMPONENTS()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.
3) AMMUNITIONS BOX COMPONENTS()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	C	NOT ESTAB.

Category : DDP
Grade : III
Size : S

1895

BANERJEE & CO.
304/4, RATNESWAR GHAT ROAD, P.O.-GARULIA NOAPARA, RLY. STN.-SHYAMNAGAR, DIST-24 PARGANAS NORTH, SHYAMNAGAR, WEST BENGAL
PIN1 : 743133
Phone No. : MOB-8697224814, 9831742944
GSTIN : 19AEDPB9359L1Z1

AEDPB9359L

Download

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) FIRING ATTACHMENT BLANK AMMUNITION FOR 5.56MM INSAS()	AS PER DRAWING.	C	Not Estab.
2) OILER HAND WITH SCREWED CAP BRUSH & LEATHER()	AS PER DRAWING.	C	Not Estab.
3) BRUSH CLEANING BRACKET & CYLINDER GAS()	AS PER DRAWING.	C	Not Estab.
4) BRUSH CLEANING CHAMBER()	AS PER DRAWING.	C	Not Estab.
5) BRUSH CLEANING()	AS PER DRAWING.	C	Not Estab.
6) HOOK()	AS PER DRAWING.	C	Not Estab.
7) TOOL ADJUSTING SIGHT()	AS PER DRAWING.	C	Not Estab.
8) PULL THROUGH()	AS PER DRAWING.	C	Not Estab.
9) ADOPTER FOR PULL THROUGH()	AS PER DRAWING.	C	Not Estab.
10) ROD CLEANING BARREL FOR 5.56MM INSAS()	AS PER DRAWING.	C	Not Estab.
11) PULL THROUGH WEIGHT()	AS PER DRAWING.	C	Not Estab.
12) BRUSH FOR 7.62 MM ASSAULT RIFLE AND GHAATAK()	AS PER DRAWING.	C	Not Estab.
13) ALL TYPES OF SCREW & PINS()	AS PER DRAWING.	C	Not Estab.

Category : P
Grade : III
Size : S

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) PULL THROUGH FOR 5.56MM INSAS (NYLON)[79]()	Specification : DS CAT NO. 1005-557944	C	Nonestab

Category : p
Grade : Grade III
Size :

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) COVER GUN MUZZLE FOR 7.62MM ASSAULT RIFLE (GHATAK)(PLASTIC)[70]()	Specification : RFI SK No- 9840	R	Nonestab

Category : P
Grade : III
Size :

1) Ammunition Factory Khadki

[ENR Registration]

Name	Specification	Use	Status
1) SET SCREW SLOTTED HD NO 2 BA()	Specification : DESIGN REF CIA/AMN/885	R	Estab

Category : p
Grade : 3
Size : S

1896

RAKO MERCHANTILE TRADERS
KHASRA No.1261, GOYLA INDUSTRIAL AREA, CHINHAT DEVA ROAD LUCKNOW UTTAR PRADESH
PIN1 : 226019
Phone No. : 0522-2813956
GSTIN : 09AADFR3754P1ZK

AADFR3754P

Download

1) Gun Carriage Factory

Name	Specification	Use	Status
1) PAINT PRIMER()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	E	NOT ESTAB.
2) THINNER VARNISH()	AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS	E	NOT ESTAB.

Category : DDP
Grade : III
Size : S

1897

SAI ENGINEERING
SR.NO.37/2, DHAYARI-NARHE, MAHALAXMI INDUSTRIAL ESTATE, NARHE PUNE MAHARASHTRA
PIN1 : 411041
Phone No. : 8805098500
GSTIN : 27AGTPD8023D1ZG

PNES37103D

Download

1) High Explosive Factory

Name	Specification	Use	Status
1) FILLING HOLE PLUG()	CQA(A) 1504(E) DC 35870-A	C	NOT ESTAB
2) STRIKER (DET 3 PART)()	CQA(A) 1504(E) DC 35870-A	C	NOT ESTAB
3) RETAINING PIN & RING()	CQA(A) 1504(E) DC 35870-A	C	NOT ESTAB
4) STRIKER LEVER()	ITW/6GE & PART NO.ITW/67	C	NOT ESTAB
5) STRIKER SPRING()	CQA(A) 1504(E) DC 35870-A	C	NOT ESTAB
6) BASE PLUG()	CQA(A) 1504(E) DC 35870-A	C	NOT ESTAB

Category : P
Grade : III
Size : S

1898

Enva Organics
42/89, 2nd Floor, Ali Manzil, Makhania Bazar, Kanpur, Uttar Pradesh
PIN1 : 208001
Phone No. : 0512-2316913
GSTIN : 09AHXPB7979HIZF

AHXPB7979H

Download

1) Ordnance Equipment Factory

Name	Specification	Use	Status
1) RUBBER ADHESIVE FOR TEMPORARY JOINING OF LEATHER COMPONENTS OF BOOT ANKLE DVS()	AS PER REQUIREMENT & SPECIFICATION	R

Category : P
Grade : III
Size : S

1899

YOTECH ENGINEERING PVT. LTD.
44, UPTRON ESTATE, PANKI, KANPUR, UTTAR PRADESH
PIN1 : 208022
Phone No. : 0512-2691519, MOB-9450326746
GSTIN : 09AAACY2845A1ZJ

KNPY01015A

Download

1) Rifle Factory Ishapur

Name	Specification	Use	Status
1) BLANK FOR SEAR SAFETY FOR RIFLE 5.56MM INSAS()	AS PER DRAWING.	C	Not Estab.
2) INSERT FOR 30-06 SPORTING RIFLE()	AS PER DRAWING.	C	Not Estab.
3) FIRING PIN NUT OF 30-06 SPORTING RIFLE()	AS PER DRAWING.	C	Not Estab.

Category : P
Grade : II
Size : S

1900

SHAKTI MODEL WORKS
515-16, RAM BAGH ROAD, BEHIND AGGARWAL SWEETS, AMBALA CANTT. HARYANA
PIN1 : 133001
Phone No. : 0171-4008777
GSTIN : 06ANXPP4500E1ZX

ANXPP4500E

Download

1) Opto Electronic Factory

Name	Specification	Use	Status
1) LENS ASSEMBLY()	As per OLF Drawing no. AF 5938193 against OTE no. 1606010866/03.08.16	C	Estab.
2) LENS (FINISHED)()	As per OLF Drawing no. BSH 7538010 against OTE no. 1606010866/03.08.16	C	Estab.
3) PRISM (FINISHED)()	As per OLF Drawing no. BSH 7200102 against OTE no. 1606010868/05.08.16	C	Estab.
4) PROTECTIVE GLASS()	As per OLF Drawing no. BSH 8640132 against OTE no. 1606010868/05.08.16	C	Estab.
5) PRISM (FINISHED)()	As per OLF Drawing no. AL 7201120 against OTE no. 1606010868/05.08.16	C	Estab.
6) PRISM (FINISHED)()	As per OLF Drawing no. AF 7200190 against OTE no. 1606010868/05.08.16	C	Estab.
7) PRISM ASSEMBLY()	As per OLF Drawing no. AF 5935063 against OTE no. 1606010869/05.08.16	C	Estab.
8) NON PARABOLIC LENS()	As per OLF Drawing no. BSH 7526010 against OTE no. 1606010869/05.08.16	C	Estab.
9) LENS()	As per OLF Drawing no. Y-7137208 against OTE no. 1606010869/05.08.16	C	Estab.
10) LENS()	As per OLF Drawing no. Y-7142646 against OTE no. 1606010869/05.08.16	C	Estab.
11) INJECTION MOULDING ITEMS()	PVC	C	Estab.

Category : P
Grade : III
Size : S

1) Ordnance Cable Factory Chandigarh

Name	Specification	Use	Status
1) FILTER FOR TNP-350B AS PER DRG. NO. AU7220070[70]()	Specification : FILTER FOR TNP-350B AS PER DRG. NO. AU7220070	C	Nonestab
2) PLATE FOR TNP-350B DRG. No. ATS8640016[70]()	Specification : PLATE FOR TNP-350B DRG. No. ATS8640016	C	Nonestab
3) LIGHT FILTER TO DRG. No. AU.5.940.026 (3 SHEETS) FOR TNPO-168B RE[70]()	Specification : LIGHT FILTER TO DRG. No. AU.5.940.026 (3 SHEETS) FOR TNPO-168B RE	C	Nonestab
4) LIGHT FILTER AU5.940.027(4 SHEETS)[70]()	Specification : LIGHT FILTER AU5.940.027 (4 SHEETS)	C	Nonestab

Category : p
Grade : Grade III
Size : S

1) Ordnance Cable Factory Chandigarh

Name	Specification	Use	Status
1) HEATED PRISM TO DRG NO ATS5935132[26]()	Specification : HEATED PRISM TO DRG NO ATS5935132	C	Nonestab
2) HEATED PRISM TO DRG. NO. ATS5935080[26]()	Specification : HEATED PRISM TO DRG. NO. ATS5935080	C	Nonestab
3) HEATING PRISM DRG. No. AU.5.935.057 TNPO-168B (11 SHEETS)[70]()	Specification : HEATING PRISM DRG. No. AU.5.935.057 TNPO-168B (11 SHEETS)	C	Nonestab
4) HEATING PRISM DRG. No. AU.5.935.058 (13 SHEETS)[70]()	Specification : HEATING PRISM DRG. No. AU.5.935.058 (13 SHEETS)	C	Nonestab
5) HEATING PRISM FOR TNP-350B, DRG.NO. ATS5935035[70]()	Specification : HEATING PRISM FOR TNP-350B, DRG.NO. ATS5935035	C	Nonestab
6) HEATING PRISM TNPO-160 DRG. No. AU 5935089 (11 SHEETS)[70]()	Specification : HEATING PRISM TNPO-160 DRG. No. AU 5935089 (11 SHEETS)	C	Nonestab

Category : p
Grade : Grade III
Size : SS