Specification : NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) TRIGGER saf matl[70]()
Specification : TRIGGER IN FINISH CONDITION AS PER DRG.NO.CQA(I)393/26 WITH-OUT ANODIZE PROTECTIVE FINISH FOR FIRING DEVICE, MATERIAL TO BE SUPPLIED BY SAF THROUGH LF NO.0142032535 AGAINST BANK GUARANTEE CAT-/PT NO.1005-007703.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Left and Right For FIRING DEVICE[70]()
Specification : GRIP HANDLE(LEFT) AS PER DRG.NO. CQA(I)-393/17 OF GRIP LEFT ASSY FOR DEVICE FIRING 1B CAT/PT.NO.5340-014125
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE[70]()
Specification : SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW SPECIAL FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
1) MICRO CONTROLLER BASED ELECTRO MECHANICAL SUB ASSYS OF EQPT()
As per requirement
C
Not Estab
2) MECHANICAL ELECTRONIC ASSYS AND ELECTROMECHANICAL ASSYS()
As per requirement
C
Not Estab
3) DATA ACQUISITION SYSTEMS WITH SENORS 10 to 1000 CHANNELS()
As per requirement
C
Not Estab
4) TRANSDUCER LOAD PRESSURE DISPLACEMENT VIBRATION WITH DIGITAL INDICATOR()
As per requirement
C
Not Estab
Category : P
Grade : II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Finished Through IC for Revolver Side Swing[70]()
Specification : Body Finished Through I.C./Machining Route for Revolver .32 Side Swing Drg. No. RV-03/1 SW.
C
Nonestab
2) Grip Sub Assy for Revolver Side Swing[70]()
Specification : Grip Sub Assy for Revolver 0.32 Side Swing Drg. No. RV-03/15,16,17 SW.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071[70]()
Specification : MANUFACTURING AND SUPPLY OF FULL FINISHED COMPONENT LEAVER PLATE TO DRG NO K 2071
C
Nonestab
2) Manufacturing and supply of Picatinny Rail DRG Number TEND 2663 REQUIRED FOR MGL[70]()
Specification : MANUFACTURING AND SUPPLY OF PICATINNY RAIL OF MGL AS PER DRG NO. TEND 2663 REQUIRED FOR MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6501009215 SLEEVE PART 2-17 DET DEVICE FZ. B15[65]()
Specification : SLEEVE, PART NO. 2-17 DRG.NO.3-024045, 3B15, DC 36767-A, MATL: TYPE NYLON-66 TO SPECN. DEF STAN 93-8/1 (LATEST ISSUE) WITH ELECTRICAL PROPERTIES & IMPACT STRENGTH AS PER GOST.10589-73
1) 6192228146 DETONATOR HOLDER ARDE 1146 DET 21[61]()
Specification : DETONATOR HOLDER TO DRG. NO. ARDE-1146 DETAIL NO. 21 AL. NO.312 DT. 13-9-1977 FOR ROCKET 68 MM HE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331800294 SLEEVE B FOR FUZE 162 MK 8[63]()
Specification : SLEEVE "B" TO DRAWING NUMBER PROP/SK-294 FOR PACKING OF FUZE162 MK-8 AND MK-9.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA FOR REVOLVER MK-III[70]()
Specification : REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFT SUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITH INSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQ UIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITIO N
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) AXIS PIN AS PER DRG. NO.5174739[71]()
Specification : AXIS PIN AS PER DRG. NO.5174739 FOR 155 MM FH GUN.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) NOZZLE AS PER DRG NO. 2A46-01-05.[98]()
Specification : NOZZLE AS PER DRG NO. 2A46-01-05.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FABRICATION OF MUZZLE BRAKE[99]()
Specification : FABRICATION OF MUZZLE BRAKE
S
Estab
2) FINISH MACHINING OF INSERT[72]()
Specification : FINISH MACHINING OF INSERT
S
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) PREMACHINING OF FRAME DRG. NO. 4081488 FG. 510476.[71]()
Specification : PREMACHINING OF FRAME FOR SP.OF 155 FH BOFORSE DRG. NO. 4081488 FG. 510476.
R
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FIXING PIN FOR SHARANG ORD[76]()
Specification : FIXING PIN AS PER DRG.NO.176-1212 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FIXING PIN 1185[76]()
Specification : FIXING PIN AS PER DRG.NO.176-1185 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) KEY AS PER DRG 161 480[76]()
Specification : KEY AS PER DRG.NO.161-480 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BASE 176 8136 FOR SHARANG[76]()
Specification : BASE AS PER DRG NO 176-8136 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF KEY 176 1104 FOR SHARANG[76]()
Specification : FINISH COMPONENT OF KEY 176 1104 FOR SHARANG FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISH COMPONENT OF DEFLECTOR 166 471 FOR SHARANG[76]()
Specification : FINISH COMPONENT OF DEFLECTOR AS PER DRG NO-166 471 FOR SHARANG ORD
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) FINISHED SEMI AUTOMATIC BODY 176 8111[76]()
Specification : FINISHED SEMI AUTOMATIC BODY 176 8111
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) CAM CONTROL HANDLE[71]()
Specification : CAM CONTROL HANDLE
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BRACKET DRG IWP 1031[71]()
Specification : BRACKET DRG IWP 1031
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) SET OF GRIP SUB ASSY TO DRG NO SK 01924[70]()
Specification : SET OF GRIP SUB ASSY TO DRG NO SK 01924
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) COLLAR SHAFT AS PER DRG No 3040 016131[41]()
Specification : COLLAR SHAFT AS PER DRG No 3040 016131
C
Estab
2) COLLAR SHAFT AS PER DRG No 3040 003628[41]()
Specification : COLLAR SHAFT AS PER DRG No 3040 003628
C
Estab
3) RETAINER PACKING AS PER DRG NO 5340 015627[41]()
Specification : RETAINER PACKING AS PER DRG NO 5340 015627
C
Estab
4) PACKING NUT AS PER DRG No 4730 006960[41]()
Specification : PACKING NUT AS PER DRG No 4730 006960
C
Estab
5) SCREW AS PER DRG No 5305 003184[41]()
Specification : SCREW AS PER DRG No 5305 003184
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Rear Spring Recoil for JVPC[70]()
Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Blank of Body Cover Drg No 23055A SKM 902 1[01]()
Specification : BLANK OF BODY COVER DRG NO 23055A,SKM-902 1,
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PISTON FOR JVPC ALFA[70]()
Specification : PISTON FOR JVPC ALFA. DIMENSION AND MATERIAL AS PER DRG. NO.0204 03 04 00 04 001 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LEVER SAFETY PIN TO PT BOF 6151795[90]()
Specification : LEVER SAFETY PIN TO PT BOF 6151795
C
Nonestab
2) LEVER RIGHT TO DRG NO DS CAT 1015 000771[90]()
Specification : LEVER RIGHT TO DRG NO DS CAT 1015 000771
C
Nonestab
3) DISC WHEEL TO DRG NO 1015 000810[90]()
Specification : DISC WHEEL TO DRG NO 1015 000810
C
Nonestab
4) PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987[90]()
Specification : PIN CONTACT FOR CRADLE ASSY DRG NO 5315 000987
C
Nonestab
5) PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932[90]()
Specification : PLATE LOCKING PISTON JOINT PIN TO PART NO BOF 6108932
C
Nonestab
6) 9080081467 PIN SHOULDER HEADED TO DRG NO 5315 001003[90]()
Specification : PIN SHOULDER HEADED TO DRG NO 5315 001003
C
Nonestab
7) 9069112695 LEVER RIGHT TO PART NO BOF 5047788[90]()
Specification : 9069112695 LEVER RIGHT TO PART NO BOF 5047788
C
Nonestab
8) PEDAL LEVER TO DRG NO 5001260[90]()
Specification : PEDAL LEVER TO DRG NO 5001260
C
Nonestab
9) HOUSING ARMATURE SOFT IRON 50 M 00 d DIA 9MM THICK TO DRG NO 5047925[90]()
Specification : HOUSING ARMATURE SOFT IRON 50 M 00/d,DIA 9MM THICK TO DRG.NO. 5047925
C
Nonestab
10) PISTON ROD TO DRG NO 4024497[90]()
Specification : PISTON ROD TO DRG.NO.4024497.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) CONNECTING PIECE FRONT TO PT NO 1148858[90]()
Specification : CONNECTING PIECE FRONT TO PT NO 1148858
C
Nonestab
2) CONNECTING PIECE REAR TO PT NO 1145139[90]()
Specification : CONNECTING PIECE REAR TO PT NO 1145139
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ROD PISTON TO DRG.NO. BOF-4020756[90]()
Specification : ROD PISTON TO DRG.NO. BOF-4020756
C
Nonestab
2) ROD PISTON (FOR BUFFER)DRG.NO. IAN-475A[90]()
Specification : ROD PISTON (FOR BUFFER) DRG.NO. IAN-475A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) LOCK ELEVATING TO DRG. NO. IAN-154-SA[90]()
Specification : LOCK ELEVATING TO DRG. NO. IAN-154-SA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ARM LEFTTO DRG. NO. 1015-000334[90]()
Specification : ARM LEFTTO DRG. NO. 1015-000334
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) ARM CONTROL TO DESIGN NO CIA WPN 800 PT NO IAN 107A[90]()
Specification : ARM CONTROL TO DESIGN NO. CIA /WPN/ 800, PT. NO. IAN-107A COMPRISING OF DRG. NO. M2/ BOF- 5067132, 6151792 TO 6151800, 6166439, 6151811, 6151812, 62659038, 5067132, 4027766, IAN-317SA & N4-1, N4-18, N5-23, N9-8 N5-30, N2-87, N15-13, N15-
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Testing Device Circuit Continuity 1 BAS[70]()
Specification : Testing Device Circuit Continuity 1B as per Drawing No CQA I 408 CAT/PT No 1345-000429
Item Code-7012907618)
1) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56
Description : RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56()
Specification : RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16
C
Estab
2) WINDING ARMATURE FOR FIRING DEVICE
Description : WINDING ARMATURE FOR FIRING DEVICE()
Specification : WINDING ARMATURE AS PER DRG.NO.CQA (I)-393/SA-4, CAT/PT.NO.2920-002194 FOR DEVICE FIRING IB
1) MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT AS PER DRG NO K 2011 WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
2) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
3) MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BODY AS PER DRG NO K 4001STR3 WITH FIRMS MATERIAL REQUIRED FOR TAR
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]()
Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY)
C
Nonestab
2) MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR[70]()
Specification : MANUFACTURING AND SUPPLY OF BOLT BLANK S2 AS PER DRG NO TEND 2656 WITH FIRMS MATERIAL FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS FS AS PER DRG NO TEND 2668 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : MANUFACTURE AND SUPPLY OF FRONT SIGHT BLOCK PRE MACHINED BLANKS (FS) AS PER DRG NO.TEND 2668 WITH FIRM'S MATERIAL FOR TRICHY ASSAULT RIFLE
C
Estab
Category :
Grade : Grade III
Size :
S
1) Field Gun Factory Kanpur
Name
Specification
Use
Status
1) BARREL BLANK ()
DRG.NO.SK-01394
C
Estab.
2) CYLINDER SUB ASSY.()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
3) SEMI FINISH BARREL (MK-III TITAN)()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
4) CYLINDER (MK-III TITAN)()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
5) BODY FINISH (TITAN)()
AS PER FGK DRG. & SPECIFICATION
C
Estab.
Category : DDP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]()
Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]()
Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Estab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()
Specification : AS PER DRG No.TEND :2509 (for K-1202)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG. & SUPPLY OF ELIMINATOR FLASH NO.2 WHITE FINISHED BLANK TO DRG. NO. TEND 1692* (ICR 1576).[70]()
Specification : AS PER DRG. NO. TEND 1692* (ICR 1576)
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Estab
2) UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No.K-2050 WITH FIRMS MATERIAL
E
Estab
3) BULLET GUIDE AS PER DRG No.K1101 WITH FIRM MATERIAL[70]()
Specification : AS PER DRG No.K1101 WITH FIRM MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Estab
2) AUTO SEAR BLANK FOR ASSAULT RIFLE ( L.F.No.7024002517)[70]()
Specification : As per Drg. No.TEND 2517 (for K 2067)
C
Estab
3) BOLT GRIP PISTOL AS PER DRG No. K 1027 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Estab
4) CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9001 WITH FIRM'S MATERIAL
E
Estab
5) CLEANING ROD AS PER DRG No. K 9011 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. K 9011 WITH FIRM'S MATERIAL
E
Estab
6) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL
C
Estab
7) CONVERSION OF BOLT BREECH FROM FORGING TO DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle[00]()
Specification : AS PER DRG.NO.29P 0013* (M) required for 0.315" Sporting Rifle
C
Estab
8) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Estab
9) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Estab
10) SUPPLY OF COMPENSATOR AS PER DRG NO.K-1021 WITH FIRMSMATERIAL[70]()
Specification : AS PER DRG NO.K-1021 WITH FIRMSMATERIAL
C
Estab
11) SUPPLY OF DISCONNECTOR AS PER DRG NO.K-2065 WITHFRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-2065 WITHFRMS MATERIAL
C
Estab
12) SUPPLY OF GAS PORT BLOCK AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Estab
2) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Estab
2) TRIGGER TO DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle[70]()
Specification : AS PER DRG.NO.: 29P 0040* required for 0.315" Sporting Rifle
C
Estab
3) SUPPLY OF REAR SIGHT ELEVATING SLIDE AS PER DRG. NO. K 2025 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K 2025
C
Estab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Estab
5) SUPPLY OF REAR SIGHT LEAF[70]()
Specification : AS PER DRG NO.K-2021 WITH FIRMS MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
2) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
3) BULLET GUIDE AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG No TEND 2570 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K-2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF EXTRACTOR FULL FINISHED INCLUDING HEAT TREATMENT WITH FIRMS MATERIAL REQUIRED FOR TAR ASSEMBLY AS PER DRG. NO. K 2012[70]()
Specification : AS PER DRG. NO. K 2012
C
Nonestab
4) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO. K 2023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 2023
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Estab
Category : p
Grade : Grade II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383 STAR 8 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION[70]()
Specification : PREMACHINED BLANK AS PER DRG NO TEND 2616 STAR 3 FOR TAR TRUNNION
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CARRIER BREECH BLOCK TO DS CAT NO 1005 001578 TO DC NO 26762 SA DATED 11 06 2015 FULL FINISHED CONDITION OUT OF FIRMS MATERIAL FOR RIFLE 7POINT62 MM ICR1268[70]()
Specification : AS PER DS CAT NO 1005-001578 TO DC NO 26762 -SA DATED 11.06.2015 (FULL FINISHED CONDITION) OUT OF FIRM'S MATERIAL FOR RIFLE 7.62 MM (ICR-1268)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290[70]()
Specification : SLIDE COCKING HANDLE WITH FIRM MATERIAL TO ICR 1290
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325[70]()
Specification : INPUT MATERIAL BODY FORGING CONVERSION OF BODY TO DS CAT NO 1005 001514 ICR 1325
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3[70]()
Specification : MANUFACTURING AND SUPPLY OF INPUT BLANK AS PER DRG NO TEND 2656 STAR2 WITH OFT MATERIAL FOR TAR BOLT K2011STAR3
C
Nonestab
Category :
Grade : Grade III
Size :
S
1705
PUSHPA ENGINEERING
SR NO 11/1 SHANTINAGARLANDEWADI BHOSARI PUNE-39 MAHRASTRA PUNE Maharashtra
PIN1 : 411039
Phone No. : 9657755233 GSTIN : 27ADOPV1931G1Z8
1) PIN DETENT SPRING TO CQA A DRG NO 13046 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : PIN DETENT SPRING TO CQA(A) DRG. NO. 13046-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002
R
Nonestab
2) SCREW DETONATOR RETAINING TO CQA A DRG NO 13154 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : SCREW DETONATOR RETAINING TO CQA (A) DRG. NO. 13154-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
R
Nonestab
3) SHAFT ROTOR ALTERNATOR TO CQA A DRG NO 13048 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : SHAFT ROTOR ALTERNATOR TO CQA (A) DRG.NO.13048-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
C
Nonestab
4) PENION NO 2 TO CQA A DRG NO 13015 0 0 AS PER DC NO 36804 A DATED 01 01 2002[00]()
Specification : PENION NO.2 TO CQA (A) DRG NO. 13015-0-0 (AS PER DC NO. 36804-A DATED 01/01/2002)
C
Nonestab
5) PIN CONNECTING TO CAT SECTION CAT PART NO 14 5315 001704 AND DRG CAT NO 23705[00]()
Specification : PIN CONNECTING TO CAT SECTION CAT/PART NO 14/5315-001704 AND DRG/ CAT NO 23705
C
Nonestab
6) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]()
Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]()
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
Specification : U BOLT FRONT DRG. NO. F-3578415V3 PT. NO. F3579715 V3
C
Nonestab
2) COLLAR TYPE HEX HEAD BOLT[90]()
Specification : COLLAR TYPE HEX HEAD BOLT M 14 X 1.5 X 50 HIGH TENSILE GRADE-10.9
C
Nonestab
3) HEX HEADED BOLT M 12 X 1.75 X 50 MM[90]()
Specification : HEX HEADED BOLT M 12 X 1.75 X 50 MM TO IS : 1364 (PART-1) -8.8 BL WITH HEX NUT M 12- IS: 1364 (PART-3) -8-BL AND WITH SPRING WASHER A 12- IS : 3063 Cd PLATED BOLT NUT
6) BOLT M12 X 1 POINT 5 X 125 PART NOL1011225 IS 1364 92 PT I P 8 8[90]()
Specification : BOLT M12 X 1.5 X 125 PART NO.L1011225.IS:1364-92 PT-I P-8.8
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) SA OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING[90]()
Specification : S/A OF HOSE TANK 2 TANK 1 FOR ASSY FUEL PIPING
C
Nonestab
2) FRONT TOE PIN ASSY[90]()
Specification : FRONT TOE PIN ASSY., PART NO. F0900914-A.1
C
Nonestab
3) SHACKLE PIN[90]()
Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3
C
Nonestab
4) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
5) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
2) LPTA SPRING PIN[90]()
Specification : SPRING PIN DRG.NO.352.322.0530
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FORGING FOR PIN[90]()
Specification : FORGING FOR PIN, DRG. No. PS-0932111
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) WHEEL BOLT M 22[90]()
Specification : WHEEL BOLT M22×2.5 PART NO. F-3569310-C
C
Nonestab
2) BOLT M10 70[90]()
Specification : BOLT M10×70×1.5 CP PLATED GR 8.8 PT. NO. L1011014
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA U Bolt with Nut[90]()
Specification : U' BOLT WITH NUT 1.2614-7080-3202N-4/VEH 2.2614-7080-3203N- 2/VEH 3. 2614-7080 3204N- 2/VEHNUT 1. HEX NUT M12 IS 1364-S8- 16/VEH 2. HEX LOCK NUT M12 IS 1364-S8- 16/VEH
C
Nonestab
2) LPTA SPRING SHACKLE PIN[90]()
Specification : SPRING (SHACKLE) PIN DRG.NO.352.325.0530
C
Nonestab
3) LPTA SPRING PIN[90]()
Specification : SPRING PIN DRG.NO.352.322.0530
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) T BOLT CLAMP[90]()
Specification : T BOLT CLAMP (79DIA), PART NO. X-3900310
C
Nonestab
2) SHACKLE PIN[90]()
Specification : SHACKLE PIN (102-06), PART NO. FF600110#A3
C
Nonestab
3) U BOLT REAR SPRING[90]()
Specification : U BOLT(REAR SPRING) PT.NO.F3595615-[I]
C
Nonestab
4) U BOLT FRONT SPRING[90]()
Specification : U BOLT (FRONT SPRING) PT_NO.F-3581915-I FOR STLN BS-III, MARK-IV N/A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030114 MS PLATE SIZE 6MM[01]()
Specification : IS 2062-1994
C
Nonestab
2) 0133030109 MS PLATE SIZE 25MM[01]()
Specification : IS 2062-1994
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6121000194 CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5[61]()
Specification : CAP PT.NO.2-4 & SMALL CUP PT.NO.2-5
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6432300008 MS PLATE 3MM TH PHOS ERA[64]()
Specification : IS:2062-1994
C
Nonestab
2) 0133030116 MS PLATE SIZE 1200 MM[01]()
Specification : MS PLATE SIZE 1200 X 600 X25 MM (IS :2062-1994 OF ANY GRADE)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333800330 PLUG WITH FILAMENT BRIDGE BUSHING[63]()
Specification : PLUG TO DRG. PART NO. IQX 975 & BUSHING TO DRG. PART NO.IQX 976 TO DESIGNERS REF. OST-B 84-409-79.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 0133030112 MS PLATE SIZE 1100[01]()
Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
2) 0133030115 MS PLATE SIZE 400[01]()
Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
3) 0133030113 MS PLATE SIZE 450 MM[01]()
Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330901200 SADDLE ASSLY TO DRG NO HE CAST 021 DET 1 CONSISTING OF 4 COMPONENTS TO DRG NO HE CAST 021 DET 2 TO 4 AND ALLEN SCREWS M5 X 5 AND QAP NO HEMRL HE ADD 08 01 REV00 OF 09 2008[63]()
Specification : SADDLE ASSLY TO DRG.NO.HE/CAST 021 DET 1 CONSISTING OF 4COMPONENTS TO DRG. NO. HE/CAST 021 DET 2 TO 4 & ALLEN SCREWS M5 X 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.
C
Nonestab
2) 6330901100 DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 5 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET. 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
3) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) RING WITH PIN TO 6206109011[62]()
Specification : RING WITH PIN TO DRG NO. 434.11.006CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF PLYWOOD PACKING FITMENTS FOR BOX C 43 A[65]()
Specification : DRG NO CQA(A)/AMN/2650 ISV 482 GA DC 37330-A
R
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) DISC FOR BOMB 51MM PACKING[62]()
Specification : DRG NO OFDR/BOMB 51MM ILLG/SMK/114
Specification : SPECN.: JSS - 9310 - 06 :2016 REV.1 SIZE :508 MM X 762 MM IN S/O 84 TO 92 GSM. D S CAT NO.9310-000 013."
P
Nonestab
2) PAPER FOR CARTG CASES AMMUNITION IN REELS OF[14]()
Specification : "PAPER FOR CARTG.CASES AMMUNITION IN REELS OF 387.4MM WIDE 457.2MM X 508 MM DIA IN CRIMSON COLOUR TO SPECN. JSS 8135- 09-2004.(REV NO.2)"
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) Set of 5 Components Upper Set for 51mm Illg. [62]()
Specification : ARDE-2064
C
Nonestab
2) DELAY TUBE FOR 51MM ILLG[62]()
Specification : DRG. ARDE 2064 (DET. 37) PART NO IQX 898 SPECN.CQA (A) 2328 (d)
C
Nonestab
3) Pin Locking for 51mm Illg. [62]()
Specification : DRG.NO. ARDE-2064 DET NO 31 PT.NO. ITV 243 SPECN.CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) EMPTY COMPONENTS LOWER SET FOR BOMB 51MM ILLG. 1A[62]()
Specification : CQA(A) 2328
C
Nonestab
2) SPRING TO DRG NO ARDE 2064.[62]()
Specification : DRG.NO. ARDE 2064 (DET NO 7) PT NO ITV 225 SPECN. CQA(A) 2328 (d)
C
Nonestab
3) CUP FOR BOMB 51MM ILLG.[62]()
Specification : DRG NO ARDE-2064 (DET NO 16)PT NO ITV 233 SPECN. CQA(A) 2328 (d)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF 9 COMPONENTS FOR FLARE TRIP WIRE[64]()
Specification : CIA 3807 (b) [ DRG NO. DD(L) 13461-A/1]
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF SPRINGS COMPRISING OF MAIN SPRING AND AUXILARY SPRINGS TO DRG NO ARDE 2222 PART NO ITV 259 AND ITV 260[62]()
Specification : MAIN SPRING AND AUXILARY SPRINGS TO DRG NO ARDE 2222 PART NO ITV 259 AND ITV 260
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) SET OF SPRINGS COMPRISING OF MAIN SPRING AND AUXILARY SPRINGS TO DRG NO ARDE 2222 PART NO ITV 259 AND ITV 260[62]()
Specification : SPECN.CQA(A) 2324(i) DRG.NO.CQA(A)/AMN/2906 PT.NO.ITV-26 SA
C
Nonestab
6) BASE PLATE ASSEMBLY FOR BOMB PRACTICE 3KG[62]()
Specification : DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF- I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12AMMENDED VIDE AL650 DT.14.03.90.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Dehu Road
Name
Specification
Use
Status
1) CASE ASSY. FOR SHELL 84 mm Illg[62]()
Specification : F-1301-902340(C)
C
Nonestab
2) TAIL UNIT 2A FOR MORTAR BOMB 120 MM ILLG.[63]()
Specification : CQA(A) 2342[DRG.NO. CIA/AMN/1397,PART NO. ITV 11 A
C
Nonestab
3) RING FOR 120MM ILLG.[63]()
Specification : SPECN. IS:1570C 40 DRG. NO. ARDE 2011, DET 24 PART NO. ITV-152
C
Nonestab
4) BOTTOM PLATE WITH SWIVEL FOR 84 MM[62]()
Specification : DRG.NO.F-1301-054860 F SPECN.F 1301-903400 CLAUSE -3 & 6.
Specification : LINER,EXPLODER CAVITY TO CQA(A) DESIGNER'S REF. 155-1070 DC NO. 36792-A DT. 01/11/2001 I.E. ALUMINIUM LINER HAVING LENGTH 33.7 - 0.5 MM AS DIRECTED BY CQA(A)PUNE VIDE LETTER NO.QA3A332 DTD.02/12/2013
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501100 LINER FOR RIGID CUTTING CHARGE 85 MM[63]()
Specification : LINER FOR CUTTING CHARGE 85 MM TO DRG NO. HE/CAST/043 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
2) 6331001100 LINER FOR RIGID CUTTING CHARGE 100 MM[63]()
Specification : LINER FOR RIGID CUTTING CHARGE 100 MM TO DRG NO. HE/CAST/044 DET 20 & SPECN NO. HEMRL/HE/ADD/08/1 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) OXYGEN FREE COPPER LINER FOR HEDP FOR 40MM AMMN. MGL/UBGL TO DRG. NO. AFK/SK-212-05 MANUFACTURED BY FLOW FORMING PROCESS[60]()
Specification : AS PER AFK SPECN.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1708
CASTLETON SPRING PVT LTD
GROUND FLOOR, ROOM NO 1, 57 RAJA BASANTA ROY ROAD KOLKATA West Bengal
PIN1 : 700029
Phone No. : 46013753 GSTIN : 37AABCC0001B1ZR
1) FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG[21]()
Specification : FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
R
Estab
2) FASTENER PLASTIC SLIDE HEAVY DUTY OG 61 CM LONG[21]()
Specification : FASTENER PLASTIC SLIDE HEAVY DUTY OG 61 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
R
Estab
3) PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM[21]()
Specification : PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
R
Estab
4) Plastic Slide Fastener L Type Closed End Auto Lock Light Special Duty OG 18 point 5 cm[21]()
Specification : Plastic Slide Fastener L Type, Closed End, Auto Lock, Light Special Duty OG 18.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
5) Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Closed End Light Special Duty OG 37 cm[21]()
Specification : Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Closed End Light Special Duty OG 37 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
6) Plastic Slide Fastener L Type Closed End Auto Lock Light Special Duty OG 19 cm[21]()
Specification : Plastic Slide Fastener L Type Closed End Auto Lock Light Special Duty OG 19 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
7) Plastic Slide Fastener L Type Reversible Slider Double Puller Open End Medium Special Duty OG 71 cm[21]()
Specification : Plastic Slide Fastener L-Type, Reversible Slider, Double Puller, Open End Medium Special Duty OG 71 cm, Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013 and as per sample held with OCFS
R
Estab
8) Plastic Slide Fastener L Type Medium Special Duty Auto Lock Open End OG 48 cm[21]()
Specification : Plastic Slide Fastener L Type, Medium Special Duty, Auto Lock, Open End OG 48 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
9) Plastic Slide Fastener L Type Reversible Slider Double Puller Open End Medium Special Duty OG 66 point 5 cm[21]()
Specification : Plastic Slide Fastener L-Type, Reversible Slider, Double Puller, Open End Medium Special Duty OG 66.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013 and as per sample held with OCFS
R
Estab
10) Plastic Slide Fastener L Type Reversible Slider Double Puller Open End Medium Special Duty OG 68 point 5 cm[20]()
Specification : Plastic Slide Fastener L-Type, Reversible Slider, Double Puller, Open End Medium Special Duty OG 68.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013 and as per sample held with OCFS
R
Estab
11) Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Open End Medium Special Duty OG 68 point 5 cm[21]()
Specification : Plastic Slide Fastener L-Type, Double Slider, Two Way, Auto Lock, Open End, Medium Special Duty OG 68.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
12) Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Open End Medium Special Duty OG 74 cm[21]()
Specification : Plastic Slide Fastener L-Type, Double Slider, Two Way, Auto Lock, Open End, Medium Special Duty OG 74 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
13) Plastic Slide Fastener L Type Open End Medium Duty Auto Lock White 74 cm[21]()
Specification : Plastic Slide Fastener L-Type, Open End Medium Duty Auto Lock White 74 cm. Pantone Shade No.11-0602
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
14) Plastic Slide Fastener L Type Open End Medium Duty Auto Lock White 75 POINT 5 cm[21]()
Specification : Plastic Slide Fastener L-Type, Open End Medium Duty Auto Lock White 75.5 cm. Pantone Shade No.11-0602 TPX.
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG[21]()
Specification : FASTENER PLASTIC SLIDE MEDIUM DUTY OG 32 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
R
Estab
2) FASTENER PLASTIC SLIDE HEAVY DUTY OG 61 CM LONG[21]()
Specification : FASTENER PLASTIC SLIDE HEAVY DUTY OG 61 CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013
R
Estab
3) PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM[21]()
Specification : PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY CLOSED END TYPE F DOUBLE PULLER NON LOCK SLIDERS OG 61 CM
SPECIFICATION: - IS:14181-2002 (PART 1 TO 3) REAFFIRMED 2013.
R
Estab
4) Plastic Slide Fastener L Type Closed End Auto Lock Light Special Duty OG 18 point 5 cm[21]()
Specification : Plastic Slide Fastener L Type, Closed End, Auto Lock, Light Special Duty OG 18.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
5) Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Closed End Light Special Duty OG 37 cm[21]()
Specification : Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Closed End Light Special Duty OG 37 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
6) Plastic Slide Fastener L Type Closed End Auto Lock Light Special Duty OG 19 cm[21]()
Specification : Plastic Slide Fastener L Type Closed End Auto Lock Light Special Duty OG 19 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
7) Plastic Slide Fastener L Type Reversible Slider Double Puller Open End Medium Special Duty OG 71 cm[21]()
Specification : Plastic Slide Fastener L-Type, Reversible Slider, Double Puller, Open End Medium Special Duty OG 71 cm, Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013 and as per sample held with OCFS
R
Estab
8) Plastic Slide Fastener L Type Medium Special Duty Auto Lock Open End OG 48 cm[21]()
Specification : Plastic Slide Fastener L Type, Medium Special Duty, Auto Lock, Open End OG 48 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
9) Plastic Slide Fastener L Type Reversible Slider Double Puller Open End Medium Special Duty OG 66 point 5 cm[21]()
Specification : Plastic Slide Fastener L-Type, Reversible Slider, Double Puller, Open End Medium Special Duty OG 66.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013 and as per sample held with OCFS
R
Estab
10) Plastic Slide Fastener L Type Reversible Slider Double Puller Open End Medium Special Duty OG 68 point 5 cm[20]()
Specification : Plastic Slide Fastener L-Type, Reversible Slider, Double Puller, Open End Medium Special Duty OG 68.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013 and as per sample held with OCFS
R
Estab
11) Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Open End Medium Special Duty OG 68 point 5 cm[21]()
Specification : Plastic Slide Fastener L-Type, Double Slider, Two Way, Auto Lock, Open End, Medium Special Duty OG 68.5 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
12) Plastic Slide Fastener L Type Double Slider Two Way Auto Lock Open End Medium Special Duty OG 74 cm[21]()
Specification : Plastic Slide Fastener L-Type, Double Slider, Two Way, Auto Lock, Open End, Medium Special Duty OG 74 cm. Pantone Shade No.19-0511
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
13) Plastic Slide Fastener L Type Open End Medium Duty Auto Lock White 74 cm[21]()
Specification : Plastic Slide Fastener L-Type, Open End Medium Duty Auto Lock White 74 cm. Pantone Shade No.11-0602
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
14) Plastic Slide Fastener L Type Open End Medium Duty Auto Lock White 75 POINT 5 cm[21]()
Specification : Plastic Slide Fastener L-Type, Open End Medium Duty Auto Lock White 75.5 cm. Pantone Shade No.11-0602 TPX.
Specification- IS:14181 (Part 1 to 3) : 2002, Amd. No.2, Reaffirmed 2013
R
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) ZIP FASTENER HEAVY DUTY METALLIC 60 CM LONG CLOSED ENDS[2111655408]()
Specification : SPECN.NO.IS:3148-1968.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) ZIP FASTENER HEAVY DUTY METALLIC 60 CM LONG CLOSED ENDS[2111655408]()
Specification : SPECN.NO.IS:3148-1968.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) METALLIC SLIDE FASTENER HEAVY DUTY 457 MM LONG OG[2111659013]()
Specification : SPECN. NO.: IS : 3148
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Parachute Factory
Name
Specification
Use
Status
1) METALLIC SLIDE FASTENER HEAVY DUTY 457 MM LONG OG[2111659013]()
Specification : SPECN. NO.: IS : 3148
R
Nonestab
Category :
Grade : Grade III
Size :
S
1711
Rukhmani Thermal & Hydraulics Mfg.
G926, Phase 4, Industrial Area, Boranada 23 No. City Bus Stand Jodhpur Rajasthan
PIN1 : 342012
Phone No. : 2945959 GSTIN : 08APIPT1398F1ZG
Specification : Specification No. VFJ/VEH/TATA/006/BS-III in consultation with specification no. CQAE/2540/1612/(b)
C
Nonestab
2) Drinking Water Tank Drg No 640 01 1450 1 D[90]()
Specification : Drinking Water Tank Drg.No.640-01-1450-1/D
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA Assy Water Tank Insulated 55 lt[90]()
Specification : ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]()
Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) HANDLE ASSY 675 50 CB301[90]()
Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) 9010398122000 BUMPER ASSY AND DETAILS FOR UPGRADED MPV 4X4[90]()
Specification : DRG. 2725-57-31
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA ASSY BUMPER FRONT[90]()
Specification : ASSY BUMPER FRONT
C
Nonestab
2) LPTA LPTA LOAD BODY[90]()
Specification : LPTA LOAD BODY COMP. WITH TROOP SEATS, CANVAS STRAPS, 5 TYPES OF MILITARY FITMENTS. PULLEY TOP (PIN PULLEY TOP) PULLEY BOTTOM (PIN PULLEY BOTTOM), WATER TANK STOOL, TAIL GATE STOPPER WITH RUBBER PAD, WATER TANK STRAPS- 2 NOS. TOP CHENNAL
C
Nonestab
3) LPTA Assy Water Tank Insulated 55 lt[90]()
Specification : ASSY WATER TANK (INSULATED 55 LTRS. LPTA713TC/32 DRG NO. VFJ/16/09/000045(V4)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) VEHICLE IDENTIFICATION PLATE[90]()
Specification : VEHICLE IDENTIFICATION PLATE
C
Nonestab
2) TAIL PIPE[90]()
Specification : TAIL PIPE FN100415HASE.0
C
Nonestab
3) S A OF FUEL TANK RH 160 LITRE PART No B5028201 V2[90]()
Specification : S/A OF FUEL TANK-RH (160 LITRE) PT.NO.B5028201-V2
C
Nonestab
4) S A OF FUEL TANK LH 160 LITRE PART No B5028202 V2[90]()
Specification : S/A OF FUEL TANK-LH(160 LITRE) PT.NO.B5028202-[V2]
C
Nonestab
5) STEERING PIPE RETURN LINE B2238210[90]()
Specification : STEERING PIPE RETURN LINE,BS3 STEERING PIPE RETURN LINE PART NO.B 2238210-B2,BS-III STALLI ON VEHICLE.
C
Nonestab
6) STEERING PIPE RETURN LINE B2238211[90]()
Specification : STEERING PIPE RETURN LINE BS3 STEERING PIPE RETURN LINE B2238211(B.1)BSIII STALLION VEH.
1) SET OF KOD AND DEGREASING CAUSTIC FREE ALKALINE CLEANER TO BE USED IN 9 TANKS PROCESS BY SPRAY METHOD FOR POWDER COATING PLANT()
AS PER SPECIFICATION
R
ESTAB.
2) SET OF ACTIVATION, PASSIVATION & PHOSPHATING CHEMICALS TO BE USED IN 9 TANKS PROCESS TO GET CLASS-III (COATING NOT LESS THAN 1.6GM/M2 AS PER JSS-0465-01-1994 (LATEST ISSUE) FOR POWDER COATING PLANT()
AS PER SPECIFICATION
R
ESTAB.
3) SET OF KOD AND DEGREASING CAUSTIC FREE ALKALINE CLEANER TO BE USED IN 9 TANKS PROCESS BY SPRAY METHOD FOR POWDER COATING PLANT()
AS PER SPECIFICATION
R
ESTAB.
4) SET OF ACTIVATION, PASSIVATION & PHOSPHATING CHEMICALS TO BE USED IN 9 TANKS PROCESS TO GET CLASS-III (COATING NOT LESS THAN 1.6GM/M2 AS PER JSS-0465-01-1994 (LATEST ISSUE) FOR POWDER COATING PLANT()
R K And Sons
209 /1 Amarsukh Near M K Hotel /
HDFC Bank Lane No 1 Sant Tukaram Nagar, New Sanghavi Lane no1 Pune Maharashtra
PIN1 : 411027
Phone No. : 9423583666
1) EOD COOLING SUIT
Description : EOD COOLING SUIT
as Authorised Dealer for M/s Holdfast Systems Pty Ltd., South Africa()
Specification : AS PER ENCLOSURE
R
Nonestab
2) EOD HELMET WITH COMMUNICATION SYSTEM
Description : EOD HELMET WITH COMMUNICATION SYSTEM
as Authorised Dealer for M/s Holdfast Systems Pty Ltd., South Africa()
1) BRASS PIG 60:40,COMPOSITION Cu: 56.5 - 62% ,Pb : 1.00% MAX. Fe % : O.10 MAX,Sb% : O.02 MAX,Zn % : REMINDER, TOTAL IMPURITIES % : O.50 MAX (EXCLUDING Cu % ,Pb % & Zn % ) AS PER SCOPE OF SUPPLY.[07]()
Specification : BRASS PIG 60:40,COMPOSITION Cu: 56.5 - 62% ,Pb : 1.00% MAX. Fe % : O.10 MAX,Sb% : O.02 MAX,Zn % : REMINDER, TOTAL IMPURITIES % : O.50 MAX (EXCLUDING Cu % ,Pb % & Zn % ) AS PER SCOPE OF SUPPLY.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1720
K MAX TECHNOLOGIES PVT LTD
23F SIDCO INDUSTRIAL ESTATE NORTH PHASE AMBATTUR CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 9443063513 GSTIN : 33AACCK5808R1Z4
