1) SHELL BODY BLANK TO OFK DRG 839-(L) (6170444600)()
SHELL BODY BLANK (INTERNAL OPERATION) TO O.F. KHAMARIA DRG.NO. TRD-839(L)
C
NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING FOR TA LINK()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
2) FORGING FOR TA GUIDE()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
3) FORGING FOR TA SHOE()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
4) FORGING FOR TA CLAMP()
AS PER OFM SPECIFICATION
C
NOT ESTABLISHED
Category : DDP,DP
Grade : II
Size :
M
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) FLANGE FRONT LH & RH()
DRG.NO.172.40.201-1A/F & 175.40.001-AF
R
NOT ESTABLISHED
2) BUSH()
DRG.NO.172.51.026/F
R
NOT ESTABLISHED
3) 1)RH FRONT FLANGE, 2)LH FRONT FLANGE()
DRG.NO. 1)172.40.364/F, 2)172.40.365/F
C
Non Established
4) GEAR, BEVEL, DRIVEN()
DRG.NO.172.41.082/F
C
Non Established
5) RACE BEARING()
DRG.NO.175.51.007/F
C
Non Established
6) REQUIREMENT OF FORGINGS (FOR 0.6KG TO 70KG)()
AS PER DRG
C
Non Established
7) BUSHING, INNER()
DRG.NO.172.2M.52.004/F
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING AND MACHINING OF TA LINK (6120100128)[61]()
Specification : TA LINK TO DRAWING NO.OFM-32844.COMPONENT SHALL BE MADE FROM CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/
TDS/TECH/04 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG NO32844.
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING & MACHINING OF TA GUIDE (6120100129)[61]()
Specification : TA GUIDE TO DRG.NO.OFM-32845.COMPONENT SHALL BE MADE FROM
CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS
/TECH/03 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO.
32845 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING & MACHINING OF TA CLAMP(6120100130)[61]()
Specification : TA CLAMP TO DRG.NO.OFM-32843.COMPONENT SHALL BE MADE FROM
[CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIRMENTS-OFM/TDS
/TECH/02 FOLLOWED BY MACHINING OF COMPONENT AS PER DRG.NO-32843]
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Ordnance Factory Muradnagar
Name
Specification
Use
Status
1) FORGING AND MACHINING OF TA SHOE (6120100131)[61]()
Specification : TA SHOE TO DRG.NO.OFM-32846.COMPONENT SHALL BE MADE FROM
CLOSE DIE STEEL FORGING AS PER TECHNICAL REQUIREMENTS-OFM/
TDS/TECH/01 FOLLOWED BY MECHINING OF COMPONENT AS PER DRG.NO
32846 AND ANNEXURE"A"THE MACHINED COMPONENT SHALL BE
Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615.
C
Nonestab
3) FORGING FOR LUG 318 (6220601406)[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738A TO
BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO
ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -
60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "
C
Nonestab
4) FORGING FOR LUG -243 (6220700172)[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY
HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF
210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5.
65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
5) FORGED BODY 81 MM (FRONT PART) (6220000121)[62]()
Specification : FORGED BODY(FRONT PART) TO DRG.NO.-OFM 32817A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
6) FORGED BODY 81 MM (REAR PART) (6220000141)[62]()
Specification : FORGED BODY(REAR PART)TO DRG. NO.-OFM-32818A FOR 81 MM BOMB
MORTAR 'C'EMPTY BODY.
C
Nonestab
7) FORGED BODY ONE SET 81MM (6220000507)[62]()
Specification : FORGED BODY ONE SET CONSISTING OF ONE FRONT PART TO DRG. NO.
OFM 32817A AND ONE REAR PART TO DRG. NO.OFM 32818A FOR 81 MM
BOMB MORTAR C EMPTY BODY
C
Nonestab
Category : p
Grade : Grade II
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]()
Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045[71]()
Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1) Small Arms Factory
Name
Specification
Use
Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]()
Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ),
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.[01]()
Specification : St. Forging Cylinder Gas (SKM-306*4) MACRO ETCH & NMIR TEST AS PER STORE DRG.
1) DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB
Description : DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB()
Specification : as per drg
C
Estab
Category : p
Grade : 1
Size :
O
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143
Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI SIXTH TO DRG NO SK 5143()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
R
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BIPOD ASSEMBLY FOR LMG
Description : BIPOD ASSEMBLY FOR LMG()
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[70]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category : P
Grade : II
Size :
1) Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[70]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Estab
2) TUBE MIDDLE SPRING RECOIL FOR JVPC[70]()
Specification : TUBE MIDDLE SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-002-00DD
C
Estab
3) TUBE REAR SPRING RECOIL FOR JVPC[70]()
Specification : TUBE REAR SPRING RECOIL FOR JVPC 5.56MM DRG.NO.0204-03-02-00-06-001-OODD
C
Estab
4) SILENCER JVPC 5.56MM[70]()
Specification : SILENCER JVPC 5.56MM
C
Estab
5) Blank for Piston extension stage VI[0132089519]()
Specification : BLANK FOR PISTON EXTENSION (STAGE VI) TO DRG.NO. SKJVPC 730 FOR JVPC 5.56MM. NOTE:-RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L.F.NO.0412001042.
R
Estab
Category : P
Grade : II
Size :
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) SLIDE SHOE TO OFAJ DRG NO FS 2770 E
Description : SLIDE SHOE TO OFAJ DRG NO FS 2770 E()
Specification : SLIDE SHOE TO OFAJ DRG NO FS 2770 E
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE
Description : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE()
Specification : CONVERSION OF FORGED BLANK FOR SHELL BODY TO DRG NO F 566E INTO SEMI FINISHED SHELL BODY AS PER OFAJ DRG NO FS 2916B OR LATEST AMENDED DRG AND SPECN AS ON TE DATE
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) PLUG END CLOSING ASSEMBLY FOR FLIGHT HARDWARE to ARDE DRG No 8603 02 01 01 03 000 12PA
Description : PLUG END CLOSING ASSEMBLY FOR FLIGHT HARDWARE to ARDE DRG No 8603 02 01 01 03 000 12PA()
Specification : PLUG END CLOSING ASSEMBLY (FOR FLIGHT HARDWARE) to ARDE DRG. No. 8603 02 01 01 03 000 12PA, MANUFACTURING, QUALITY ASSURANCE & IDENTIFICATION MARK AS PER SPECIFICATION NO ARDE/SPECN/PINAKA/RKT-03 LATEST ISSUE OR LATEST AMENDED DRG. AND SP
Specification : INSERT OGIVE REAR TO DRG.NO. SK-1555
C
Estab
Category : dp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Butt Assembly
Description : Butt Assembly()
Specification : DSCAT No. 1005-000835
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) BUTT ASSY FOR CARBINE 9MM
Description : BUTT ASSY FOR CARBINE 9MM()
Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1
C
Estab
Category : p
Grade : 3
Size :
S
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630()
Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
C
Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION
Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION()
Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
C
Estab
Category : dp
Grade : 1
Size :
M
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630()
Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
C
Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION
Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION()
Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
C
Estab
Category : dp
Grade : 1
Size :
M
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630()
Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
C
Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION
Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION()
Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
C
Estab
Category : dp
Grade : 1
Size :
M
1) Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
Description : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630()
Specification : SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630
C
Estab
2) SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION
Description : SAFETY LOCK ASSY TO DRG NO NAI J 501 16 IN FINISHED CONDITION()
Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
C
Estab
Category : dp
Grade : 1
Size :
M
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) MAGAZINE TO ARDE DRG NO 1146 DET 2
Description : MAGAZINE TO ARDE DRG NO 1146 DET 2()
Specification : MAGAZINE TO ARDE DRG NO 1146 DET 2
C
Estab
2) WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000
Description : WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000()
Specification : WASHER (LEATHER) TO DRG.NO.QX-207 DC 36644-A DT.10-02-2000
C
Estab
3) SCREW GRUB BA STEEL TO BS 970 EN 1 A CONICAL POINTED NO 3
Description : SCREW GRUB BA STEEL TO BS 970 EN 1 A CONICAL POINTED NO 3()
Specification : BS 970 EN 1 A, CONICAL POINTED NO. 3HAVING OD=0.1614 INCH/4.1MM, TPI=34.8,PITCH=0.7300MM, LENGTH=H7.62,L7.37MM
C
Estab
4) CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000
Description : CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000()
Specification : CAP TO DRG NO.QX 197 DC 36685-A DTD.05.07.2000.
C
Estab
5) SCREW GRUB B A STEEL TO BS 970EN 1A FLAT POINTED NO 4 HAVING OD 0 point 1417 INCH by 3 point 6 MM TPI 38 point 5 PITCH 0 point 660 MM LENGTH H 3 point 05
Description : SCREW GRUB B A STEEL TO BS 970EN 1A FLAT POINTED NO 4 HAVING OD 0 point 1417 INCH by 3 point 6 MM TPI 38 point 5 PITCH 0 point 660 MM LENGTH H 3 point 05()
Specification : SCREW GRUB B A STEEL TO BS 970EN 1A, FLAT POINTED NO.4 HAVING OD 0.1417 INCH/3.6MM, TPI 38.5 ,PITCH 0.660MM, LENGTH H 3.0 5-0.25
C
Estab
6) BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D
Description : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D()
Specification : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D
C
Estab
7) INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA
Description : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA()
Specification : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA
C
Estab
8) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92
Description : BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92()
Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92
C
Estab
9) CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917
Description : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917()
Specification : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917.
C
Estab
Category : ddp
Grade : 1
Size :
M
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) 1.BIPOD ASSY. To DS CAT NO. 1005-557897
Description : 1.BIPOD ASSY. To DS CAT NO. 1005-557897()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15
Description : NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15()
Specification : NOZZLE TO DRG. NO. NASK-776/2/1 DATED 15-07-15.
C
Estab
Category : ddp
Grade : 2
Size :
M
1) Ordnance Factory Kanpur
[ENR Registration]
Name
Specification
Use
Status
1) Graphite Tube for Throat Insert as per Drg. No. SK-8738/E with Annexure "A1" & Appendix "A5" for specification, inspection parameter and acceptance criteria.
Description : Graphite Tube for Throat Insert as per Drg. No. SK-8738/E with Annexure "A1" & Appendix "A5" for specification, inspection parameter and acceptance criteria.()
Specification : As per Drg. No. SK-8738/E
E
Estab
Category : p
Grade : 2
Size :
M
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56
Description : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56()
Specification : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).
C
Estab
2) PISTON EXTENSION BLANK Drg. No AKC-07/01
Description : PISTON EXTENSION BLANK Drg. No AKC-07/01()
Specification : AS PER DRG
C
Estab
3) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.
Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Estab
4) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm
Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm()
Specification : AS PER DRG.
C
Estab
5) CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM
Description : CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM()
Specification : CUP I.C. TO DRG NO. AKC-02/1 I.C.* FOR CARBINE 5.56MM.
C
Estab
6) BAYONET 1A FOR RIFLE
Description : BAYONET 1A FOR RIFLE()
Specification : AS PER DRAWING
C
Estab
7) BRACKET FOR SMALL ARMS
Description : BRACKET FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
8) HINGE COVER FOR SMALL ARMS
Description : HINGE COVER FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
9) SCABBARD BAYONET FOR CARBINE 9MM
Description : SCABBARD BAYONET FOR CARBINE 9MM()
10) BUTT ASSY FOR CARBINE 9MM
Description : BUTT ASSY FOR CARBINE 9MM()
Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1
C
Estab
11) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM
Description : PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM()
Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1
C
Estab
12) HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.
Description : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.()
Specification : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.
C
Estab
13) Bayonet for Carbine Machine 9MM 1A
Description : Bayonet for Carbine Machine 9MM 1A()
14) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE
Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
C
Estab
15) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.
Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.()
Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.
C
Estab
16) Post Aiming MG MK 3 DS CAT No 1290x000258
Description : Post Aiming MG MK 3 DS CAT No 1290x000258()
Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition
18) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56
Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56()
Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)
C
Estab
19) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)()
Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56
Description : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 FOR RIFLE 5 56()
Specification : STEEL BLANK OF BARREL EXTENSION UPTO STAGE 5 AS PER DRG. NO. SK-5092*2(RAW MATERIAL SIZE- 40X50 MM BS:970 PT.1-1983,817 M40 "T"(BS:970 EN 24 "T")COND.HARDNESS 248-302 HB AGAINST L.F. NO. 0334032650 WILL BE SUPPLIED BY SAF AGAINST B/G).
C
Estab
2) PISTON EXTENSION BLANK Drg. No AKC-07/01
Description : PISTON EXTENSION BLANK Drg. No AKC-07/01()
Specification : AS PER DRG
C
Estab
3) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.
Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Estab
4) Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm
Description : Trigger Assy. drg .no. CQA(SA) SK -454/1/1 / 1005-560044 for Rifle 5.56mm()
Specification : AS PER DRG.
C
Estab
5) CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM
Description : CUP I C TO DRG NO AKC 02 1 I C FOR CARBINE 5 56MM()
Specification : CUP I.C. TO DRG NO. AKC-02/1 I.C.* FOR CARBINE 5.56MM.
C
Estab
6) BAYONET 1A FOR RIFLE
Description : BAYONET 1A FOR RIFLE()
Specification : AS PER DRAWING
C
Estab
7) BRACKET FOR SMALL ARMS
Description : BRACKET FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
8) HINGE COVER FOR SMALL ARMS
Description : HINGE COVER FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
9) SCABBARD BAYONET FOR CARBINE 9MM
Description : SCABBARD BAYONET FOR CARBINE 9MM()
10) BUTT ASSY FOR CARBINE 9MM
Description : BUTT ASSY FOR CARBINE 9MM()
Specification : BUTT ASSY TO DRG/DSCAT NO 1005-000835 DC(I) NO. 26339-SA, DT.21-5-07 AND DETAILS OF LATEST ISSUE 9MM CARBINE 1A1
C
Estab
11) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM
Description : PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM()
Specification : PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1
C
Estab
12) HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.
Description : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.()
Specification : HANDLE COCKING TO DRG/DS CAT NO. 1005-000900 DC(I) NO. 26897-SA DT.19-07-16 IN FINISHED CONDITION.
C
Estab
13) Bayonet for Carbine Machine 9MM 1A
Description : Bayonet for Carbine Machine 9MM 1A()
14) TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE
Description : TRIGGER ASSEMBLY TO DSCAT NO. 1005-006589 FOR 9 MM CARBINE()
Specification : Trigger Assembly to DS CAT No.1005-000589, DC (I) No.26375-SA dated 05.09.07 with details of latest issue Inspection to be govern by relevant clauses of Specn. JSS-1005-1993 of latest issue and any other acceptance criteria to be provided
C
Estab
15) GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.
Description : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.()
Specification : GUIDE TO DS CAT NO.1005-006843 DC(I)NO.25338-SA DT.23.4.02 IN FINISHED CONDITION.
C
Estab
16) Post Aiming MG MK 3 DS CAT No 1290x000258
Description : Post Aiming MG MK 3 DS CAT No 1290x000258()
Specification : Post Aiming No. MG MK-3 to DS CAT No. 1290-000258 DC(I) 24575-SA dt. 30.10.99 in finished condition
18) MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56
Description : MONOPOD ASSEMBLY BROWN COLOUR FOR LMG5 56()
Specification : MONOPOD ASSEMBLY FOR5.56 LMG AS PER DRG NO.ARDE SK-3302 IN FINISHED CONDITION CONSISTING OF 21 COMPONENTS VIZ. DRG.NO.-ARDE SK-3302/1 TO 3302/21.(BROWN COLOUR)
C
Estab
19) MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
Description : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)()
Specification : MONOPOD ASSEMBLY MG 5.56MM 1A1, AS PER DS CAT NO 1005-560749 DC CAT NO. 26607-SA,DT.06.02.12 IN F/CD (BLACK COLOUR)
Specification : DRG NO. CQA(A)/AMN/2808, PART NO.IQW7 GE
C
Estab
Category : p
Grade : 2
Size :
S
1) Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) TUBE FOR DISTANCE TUBE TO OFAJ DRG NO FS 1161D
Description : TUBE FOR DISTANCE TUBE TO OFAJ DRG NO FS 1161D()
Specification : TUBE FOR DISTANCE TUBE TO OFAJ DRG. NO. FS-1161D.
C
Estab
2) CONVERSION OF BRASS ROD TO SPECN BS 2874 1969 CZ 121 3PBTO SIZE 39 MM DIA INTO MAGAZINE SEMIFINISHED AS PEROFAJ DRG NO FS 2424
Description : CONVERSION OF BRASS ROD TO SPECN BS 2874 1969 CZ 121 3PBTO SIZE 39 MM DIA INTO MAGAZINE SEMIFINISHED AS PEROFAJ DRG NO FS 2424()
Specification : CONVERSION OF BRASS ROD TO SPECN. BS:2874-1969 CZ-121 3PBTO SIZE 39 +/-0.1 MM DIA INTO MAGAZINE SEMIFINISHED AS PEROFAJ DRG. NO. FS-2424.
C
Estab
3) SEMI FINISHED MAGAZINE AS PER OFAJ DRG NO FS 2422A
Description : SEMI FINISHED MAGAZINE AS PER OFAJ DRG NO FS 2422A()
Specification : SEMI FINISHED MAGAZINE AS PER OFAJ DRG.NO. FS-2422A (UPTOTURNING OPERATION).
C
Estab
4) SHUTTER TO OFAJ DRG NO FS 957C
Description : SHUTTER TO OFAJ DRG NO FS 957C()
Specification : SHUTTER TO OFAJ DRG. NO. FS-957C.
C
Estab
5) TUBE BLANK TO OFAJ DRG NO FS 961 C
Description : TUBE BLANK TO OFAJ DRG NO FS 961 C()
Specification : TUBE BLANK TO OFAJ DRG.NO. FS-961 C
C
Estab
6) CONVERSION OF BRASS ROD SIZE 33 MM DIA INTO BUSH AS PER OFAJ DRG NO FS 2427 B
Description : CONVERSION OF BRASS ROD SIZE 33 MM DIA INTO BUSH AS PER OFAJ DRG NO FS 2427 B()
Specification : CONVERSION OF BRASS ROD TO SPECN.BS:2874-1986 GR.CZ-121 PB3TO SIZE 33 +0.075/-0.13 MM DIA INTO BUSH AS PER OFAJ DRG.NO. FS-2427 B (WITHOUT PASSIVATION).
C
Estab
7) CONVERSION OF BRASS ROD SIZE 31point 75 MM DIA INTO CAP BOTTOM
Description : CONVERSION OF BRASS ROD SIZE 31point 75 MM DIA INTO CAP BOTTOM()
Specification : CONVERSION OF BRASS ROD TO SPECN. BS:2874-1986 GRADE CZ-121PB3 TO SIZE 31.75 +0.025/-0.075 MM DIA INTO CAP (BOTTOM) SEMIFINISHED AS PER OFAJ DRG.NO. FS-2425A(WITHOUT PASSIVATION).
C
Estab
8) CIRCLIP TO OFAJ DRG NO FS 1942B
Description : CIRCLIP TO OFAJ DRG NO FS 1942B()
Specification : CIRCLIP TO OFAJ DRG. NO. FS-1942B
C
Estab
9) TAIL UNIT ASSEMBLY TO DRAWING NO AAIW BS 0071
Description : TAIL UNIT ASSEMBLY TO DRAWING NO AAIW BS 0071()
Specification : TAIL UNIT ASSEMBLY TO DRAWING NO. AAIW/BS-0071
C
Estab
10) BALANCING MASS OF 45 DEGREE AS PER OFAJ DRG NO FS 2646D
Description : BALANCING MASS OF 45 DEGREE AS PER OFAJ DRG NO FS 2646D()
Specification : BALANCING MASS OF 45 DEGREE AS PER OFAJ DRG NO FS 2646D
C
Estab
11) BLANK FOR TAIL TUBE TO OFAJ DRG NO FS 2822B
Description : BLANK FOR TAIL TUBE TO OFAJ DRG NO FS 2822B()
Specification : BLANK FOR TAIL TUBE TO OFAJ DRG.NO.FS-2822B
C
Estab
12) PACKING PIECE FOR NTT 48 DET TO DRG NO 8603 04 09 01 01 003 00 DA
Description : PACKING PIECE FOR NTT 48 DET TO DRG NO 8603 04 09 01 01 003 00 DA()
Specification : PACKING PIECE FOR NTT-48 DET.TO DRG.NO.8603 04 09 01 01 003 00 DA
C
Estab
13) JACKET TO CQA A DRG NO 3 016919 DET 16 DC 34325 A DT 11 2 88
Description : JACKET TO CQA A DRG NO 3 016919 DET 16 DC 34325 A DT 11 2 88()
Specification : JACKET TO CQA(A)DRG.NO.3-016919 DET-16,DC-34325-A DT.11.2.88
C
Estab
14) CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917
Description : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG NO F 495D INTO SEMI FINISHED TPT BODY AS PER DRG NO FS 2917()
Specification : CONVERSION OF FORGED BLANK FOR TPT BODY AS PER DRG.NO.F-495D INTO SEMI FINISHED TPT BODY AS PER DRG. NO. FS-2917.
C
Estab
15) SCREW SSS 2 by 4 TO OFAJ DRG NO FS 2887 C
Description : SCREW SSS 2 by 4 TO OFAJ DRG NO FS 2887 C()
Specification : SCREW SSS 2 X 4 TO OFAJ DRG. NO. FS-2887 C
C
Estab
16) NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15
Description : NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15()
Specification : NOZZLE TO DRG. NO. NASK-776/2/1 DATED 15-07-15.
C
Estab
17) BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92
Description : BODY TO CQA A DRG NO IQX 239 DC 35434 A DT 30 12 92()
Specification : BODY TO CQA (A) DRG.NO. IQX-239 DC-35434-A, DT. 30.12.92
C
Estab
18) HEX SOCKET HEAD GRUB SCREW TO DRG NO NASK 1079 DATED 27 01 10
Description : HEX SOCKET HEAD GRUB SCREW TO DRG NO NASK 1079 DATED 27 01 10()
Specification : HEX SOCKET HEAD GRUB SCREW TO DRG. NO. NASK 1079 DATED27-01-10
C
Estab
19) SLIDE SHOE TO OFAJ DRAWING NO FS 3024
Description : SLIDE SHOE TO OFAJ DRAWING NO FS 3024()
Specification : SLIDE SHOE TO OFAJ DRAWING NO FS-3024
C
Estab
20) CONVERSION OF STEEL ROD TO SIZE 25 point 4 MM DIA INTO SLEEVE FOR STEMMING
Description : CONVERSION OF STEEL ROD TO SIZE 25 point 4 MM DIA INTO SLEEVE FOR STEMMING()
Specification : CONVERSION OF STEEL ROD TO SIZE:25.4 MM DIA INTO SLEEVE FOR STEMMING (SEMI FINISHED CONDITION) TO OFAJ DRG.NO.FS-2966
C
Estab
21) BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D
Description : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D()
Specification : BALANCING MASS OF 60 DEGREE AS PER OFAJ DRG NO FS2645D
C
Estab
22) INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA
Description : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA()
Specification : INSERT OGIVE REAR TO ARDE DRG NO 8603 03 02 01 03 001 00PA
C
Estab
23) WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000
Description : WASHER LEATHER TO DRG NO QX 207 DC 36644 A DT 10 02 2000()
Specification : WASHER (LEATHER) TO DRG.NO.QX-207 DC 36644-A DT.10-02-2000
C
Estab
24) SCREW GRUB BA STEEL
Description : SCREW GRUB BA STEEL()
Specification : BS 970 EN 1 A, CONICAL POINTED NO. 3HAVING OD=0.1614 INCH/4.1MM, TPI=34.8,PITCH=0.7300MM, LENGTH=H7.62,L7.37MM
C
Estab
25) CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000
Description : CAP TO DRG NO QX 197 DC 36685 A DTD 05 07 2000()
Specification : CAP TO DRG NO.QX 197 DC 36685-A DTD.05.07.2000.
1) Striker to Drg no NAD 7606 by 2 for Striker Mechanism in finished condition[70]()
Specification : Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Magazine Assy with NI PTFE Coated for JVPC[70]()
Specification : MAGAZINE ASSY. WITH ELECTROLESS NICKEL POLY TETRA FLUERO ETHYLENE (NI-PTFE) COATED OR [TO BE COATED WITH NIPODERM 600 AS PER SPEEN NO.ARDE/SA/2016/COATING-02] AS PER DRG NO.0204-03-03-00-07-000-00DD
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) TRIGGER GUARD MOULDING for JVPC[70]()
Specification : TRIGGER GUARD MOULDING DRG. NO.0204-03-03-16-26-000-00DD for JVPC
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) 3 Point Sling for JVPC[70]()
Specification : 3 Point Sling for JVPC 5.56MM Drg.No.204-04-03-00-00-000-00DA (I/Code-7012470197)
Specification : BRACKET SUPPORTING TO DRG. NO. CQA (I) 393/37 WITH OUT SURFACE TREATMENT RAW MATERIAL WILL BE SUPPLIED BY SAF AGAINST BANK GUARANTEE L. F. NO. 0145007056
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE[70]()
Specification : SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Grip Handle Right[70]()
Specification : GRIP HANDLE (RIGHT) AS PER DRG.NO. CQA(I)-393/1 FOR DEVICE FIRING 1B CAT/PT - 5340-014126
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Screw Externally Releived Body[70]()
Specification : SCREW EXTERNALLY RELEIVED BODY DRG.NO. CQA(I)-393/2 FOR DEVICE FIRING 1B FOR MINE CAT./PT.NO.5305-016658
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PLUG FOR FIRING DEVICE 1B FOR MINE[70]()
Specification : PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
Specification : NUT CASTELLATED HEXAGON AS PER DRG.NO.CQA (I)-393/3,CAT./PT.NO.5310-021796 FOR DEVICE FIRING IB FOR MINE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Ring Retaining CQAI 39332[70]()
Specification : RING RETAINING AS PER DRG.NO.CQA(I) 393/32, CAT./PT.NO.5365-009879 FOR ARMATURE OF DEVICE FIRING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Pin Staright Headed[70]()
Specification : PIN STRAIGHT HEADED AS PER DRG NO.CQA(I) 393/33 FOR ARMATURE OF DEVICE FIRING 1B CAT./PT.NO.5315-008701
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Opto Electronic Factory
Name
Specification
Use
Status
1) SCREW DRIVER DRG NO NBL4094000 WITHOUT ELECTROPLATING LF NO 9001081121[90]()
Specification : SCREW DRIVER DRG NO NBL4094000 WITHOUT ELECTROPLATING LF NO 9001081121
C
Nonestab
2) COVER PLASTIC MOULD LF 7580100048[75]()
Specification : COVER PLASTIC MOULD LF 7580100048
C
Nonestab
3) PLATE PLASTIC MOULD LF 7580100008[75]()
Specification : PLATE PLASTIC MOULD LF 7580100008
C
Nonestab
4) BUSHING LF 7432414001[74]()
Specification : BUSHING LF 7432414001
C
Nonestab
5) INSERT RM LF 7432414011[74]()
Specification : INSERT RM LF 7432414011
C
Nonestab
6) BOX GASKET LF 9927094563[99]()
Specification : GASKET LF 9927091007
C
Nonestab
7) PACKING BOX FOR MRS LF NO 1460410029[14]()
Specification : PACKING BOX FOR MRS LF NO 1460410029
C
Nonestab
8) JACKET AF6 832 087 LF NO 9927084268[99]()
Specification : PACKING MATERIAL
C
Nonestab
9) FILM PET E 20X25 GOST 24234 80 LF NO 7440020170[74]()
Specification : FILM PET E 20X25 GOST 24234- 80 LF NO 7440020170
C
Nonestab
10) COVER LF NO 7440205869[74]()
Specification : COVER LF NO 7440205869
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) Snap Fastener Spring Type 7/7 Top in two parts(Cap Nickle Plated)()
No.IS:4741:1968,Amd.1,Reaffirmed 2008 except for pull strength which should be 4 Kgf)
R
Not Estab.
2) Snap Fastener Spring Type 7/7 Bottom in two parts()
No.IS:4741:1968,Amd.1,Reaffirmed 2008 except for pull strength which should be 4 Kgf)
R
Not Estab.
Category : DP
Grade : I,II
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BACK PACK WEAPON TO DRG.NO. 33P 6003* FOR 38mm MSL.[70]()
Specification : AS PER DRG OF BACK PACK WEAPON TO DRG.NO. 33P 6003* FOR 38mm MSL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BAG FOR SPARE PARTS, TOOLS & ACCESSORIES OF MACHINE GUN 12.7mm A.D TO D.S.CAT.No.: 8460-000019, D.C.No.: 25957-SA, DATED: 14/06/2004 (A-9800) WITH DETAILS OF LATEST ISSUE.[42]()
Specification : AS PER DRG TO BAG FOR SPARE PARTS, TOOLS & ACCESSORIES OF MACHINE GUN
12.7mm A.D TO D.S.CAT.No.: 8460-000019, D.C.No.: 25957-SA,
DATED: 14/06/2004 (A-9800) WITH DETAILS OF LATEST ISSUE.
S
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPTA BAG[70]()
Specification : AS PER THE DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Link for 30 mm gun Fully Finished[70]()
Specification : Link for 30 mm gun Fully Finished to Drg No 9H623 REQUIRED FOR 30mm BMP II Ammn LF No 7013889230
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MUZZLE CAP FOR 40mm UBGL TO DRG NO.32P 4003*2[40]()
Specification : AS PER DRAWING
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN COCKING HANDLE TO D S CAT NO 5315 009175 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1288 FOR DC NO LATEST ISSUE TO BE FOLLOWED[70]()
Specification : AS PER D.S. CAT NO.5315-009175 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1288)FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CATCH MAGAZINE AS PER DRG NO K 1111 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1111
C
Nonestab
2) GUARD TRIGGER AS PER DRG No K 1104 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 1104 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PIN RETAINING LOCKING CATCH TO D S CAT NO 5315 001773 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1221[70]()
Specification : AS PER D.S. CAT. NO.5315-001773 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1221)
C
Nonestab
2) STUD LEVER LOCK TO D S CAT NO 1005 001659 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1321[70]()
Specification : AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)
C
Nonestab
3) SCREW FRONT SLING LOOP TO D S CAT NO 5305 004999 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1206[70]()
Specification : AS PER D.S. CAT NO.5305-004999 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1206)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SCREW RETURN SPRING TUBE TO DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)[70]()
Specification : AS PER DS.CAT.NO.5305-018167 DC.NO.24623-SA DT.27.01.2000 FOR DC. NO. LATTEST ISSUE TO BE FOLLOWED (WHITE FINISHED CONDITION WITH FIRM MATERIAL)
C
Nonestab
2) PIN AXIS ROD TO D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)[70]()
Specification : AS PER D.S. CAT NO 5315-001766 DC NO.21300-SA DT.12.07.1991 FOR DC.NO. LATEST ISSUE TO BE FOLLOWED. WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1269)
C
Nonestab
3) PIN EJECTOR UPPER TO DS CAT NO 5315 001758 DC NO 25999 SA DT 20 10 04 FOR DC NO LATEST ISSUE TO BE FOLLOWED WHITE FINISHED CONDITION WITH FIRM MATERIAL ICR 1326[70]()
Specification : AS PER DS.CAT.NO. 5315-001758 DC NO.25999-SA DT.20-10-04 FOR DC NO. LATEST ISSUE TO BE FOLLOWE (WHITE FINISHED CONDITION WITH FIRM MATERIAL) (ICR-1326)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF SLING ASSY TO DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )[70]()
Specification : AS PER DRG.NO.CQA(SA)SK-1000.DC.NO.26521-SA DT.12.07.2010 WITH LOOP SLING REAR TO DS.CAT.NO.5340-015579 DC.NO.26508-SA DT.2.06.2010.FOR DC.NO. LATEST ISSUE TO BE FOLLOWED.( R6402 & R 8300 CES )
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT LOCKING TO DRG NO 29P 0042STAR2 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO.29P 0042*2 required for 0.315" Sporting Rifle
C
Nonestab
2) SCREW EJECTOR TO DRG NO 29P 0052 required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG. NO.29P 0052 required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SCREW PLATE BUTT TO DRG NO 29P 0059STAR required for 0POINT315 Sporting Rifle[70]()
Specification : AS PER DRG.NO. 29P 0059* required for 0.315" Sporting Rifle
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT GRIP PISTOL AS PER DRG No K 1027 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No. K 1027 WITH FIRM'S MATERIAL
C
Estab
2) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Estab
3) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL
C
Estab
4) SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL[70]()
Specification : SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL
C
Estab
5) JACKET CASE FOR 05 MAGAZINES AS PER DRG No K 9023 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9023
WITH FIRMS MATERIAL
E
Estab
6) BOX FOR ACCESSORIES WITH CAP AS PER DRG NO K 9021WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 9021WITH FIRMS MATERIAL
E
Estab
7) CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL[70]()
Specification : CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL
E
Estab
8) PULL THROUGH 1A NYLON AS PER DS CAT NO 1005 001760 FOR DC NO 22520 SA DATED 2 point 5 point 94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7point 62mm 1A1[70]()
Specification : AS PER DS CAT NO.1005-001760 FOR DC NO. 22520-SA DATED 2.5.94 LATEST ISSUE TO BE FOLLOWED FOR RIFLE 7.62mm 1A1
E
Estab
9) SUPPLY OF GAS PISTON AS PER DRG NO TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Estab
10) Slush Brush[70]()
Specification : as per Drg. No.: K-9009 with Firm’s Material
E
Estab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Sling Assembly for 7.62mm Rifle()
As per Drawing
C
Not Estab.
2) Sling Assembly for 7.62mm Rifle()
As per Drawing
C
Not Estab.
Category : DDP
Grade : I,II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION.[70]()
Specification : PIN STRAIGHT HEADED TO DS CAT NO. 5315-001537 DC(I) NO. 25365-SA DT- 16.05.02 IN FINISHED CONDITION.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Nut Extractor DRG. No. PH-4-2[70]()
Specification : As per Drg.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW SPECIAL IN FINISHED CONDITION FOR AMOGH CARBINE 5 56[70]()
Specification : SCREW SPECIAL IN FINISHED CONDN.TO DS CAT NO.5305-095385 DC(I) NO.26952-SA DT. 29-09-2016
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE[70]()
Specification : SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BUTTON SPECIAL OF GRIP LEFT ASSY FOR FIRING DEVICE IB[70]()
Specification : BUTTON SPECIAL AS PER DRG.NO.CQA (I)-393/18, CAT/PT.NO.5340-014217 OF GRIP LEFT ASSY FOR DEVICE FIRING IB
C
Nonestab
2) SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB[70]()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB
C
Nonestab
3) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB[70]()
Specification : SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB
C
Nonestab
4) Magnet Permanent for Firing Device[70]()
Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768
17) CELL FOR FILTER LIGHT ABSORBING OPTICAL INSTUMENT AS PER DRG NO IRDE 335 47 SHT NO 2[74]()
Specification : CELL FOR FILTER ,LIGHT ABSORBING,
OPTICAL INSTUMENT AS PER DRG. NO.
IRDE-335/47 SHT NO. 2
C
Nonestab
18) CELL ERECTOR TO DRG NO MCT 2918 1[74]()
Specification : CELL ERECTOR TO DRG.NO. MCT-2918/1 FOR D/S TELE.5.56MM RIFLE
C
Nonestab
19) CELL GRATICULE TO DRG MCT 1143 1 FOR SIGHT UNIT CASED 102B[74]()
Specification : CELL GRATICULE TO DRG.MCT-1143/1
FOR SIGHT UNIT CASED 102B
C
Nonestab
20) CELL OPTICAL INSTRUMENTS ERECTOR AS PER DRG NO IRDE 2605 9[74]()
Specification : CELL OPTICAL INSTRUMENTS (ERECTOR) AS PER DRG.NO. IRDE-2605/9.
C
Nonestab
21) CELL OUTER DRG NO IRDE 2048 129[74]()
Specification : CELL OUTER DRG NO.IRDE-2048/129
C
Nonestab
22) CLAMP FINISH TO DRG NO MCT 2103[74]()
Specification : CLAMP(FINISH) TO DRG NO. MCT-2103
C
Nonestab
23) CLAMP SCREW ADJUSTABLE DRG NO IRDE 1166 4 FOR COLLIMETER INFINITY[74]()
Specification : CLAMP SCREW ADJUSTABLE DRG.NO.IRDE-1166/4 FOR COLLIMETER INFINITY
C
Nonestab
24) CONTAINER AS PER DRG NO IRDE 335 68[74]()
Specification : CONTAINER AS PER DRG.NO.:IRDE-335/68
C
Nonestab
25) CORRUGATED CARTON BOX DRG ODD M 2546 2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER[74]()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Nonestab
26) FLAT HD BRASS RIVET FOR S 102B[17]()
Specification : FLAT HD BRASS RIVET 2.8X8(AS SHOP)FOR S. 102B.
C
Nonestab
27) FORE SIGHT DRG NO IRDE 1035 57[74]()
Specification : FORE SIGHT DRG.NO.IRDE-1035/57
C
Nonestab
28) FORE SIGHT TO DRG NO MCT 3106 FOR MT TELESCOPE 102A[74]()
Specification : FORE SIGHT TO DRG.NO.- MCT-3106 FOR MT.TELESCOPE 102A W.O.34258.
C
Nonestab
29) KNOB TO DRG MCT 1150 2 FOR SIGHT UNIT CASED 102B[74]()
Specification : KNOB TO DRG, MCT-1150/2
FOR SIGHT UNIT CASED 102B
C
Nonestab
30) KNOB TO DRG NO MCT 3096 FOR MT TLESCOPE 102A[74]()
Specification : KNOB TO DRG.NO. MCT-3096.FOR MT.TLESCOPE 102A
C
Nonestab
31) KNOB TO DRG NO MCT 3245 FOR SIGHT DIAL 104A[74]()
Specification : KNOB TO DRG.NO.MCT-3245 FOR SIGHT DIAL 104A
C
Nonestab
32) KNOB TO DRG NO MCT 2710 FOR INDICATOR FUZE 105 37[74]()
Specification : KNOB TO DRG.NO.MCT-2710 FOR INDICATOR FUZE , 105/37.
C
Nonestab
33) LEVER DRG NO CII 125[74]()
Specification : LEVER DRG.NO.CII-125
C
Nonestab
34) LEVER DRG NO IRDE 2048 139[74]()
Specification : LEVER DRG NO.IRDE-2048/139
C
Nonestab
35) NUT AS PER DRG NO AU8 934 008[74]()
Specification : NUT AS PER DRG.NO. AU8.934.008
C
Nonestab
36) NUT BRASS HEXAGONAL M3 FOR PLOTTER 81MM MORTAR CASED 101A FINISH DULL BLACK BRONZING[17]()
Specification : NUT BRASS HEXAGONAL M3 FOR PLOTTER 81MM MORTAR CASED 101A. FINISH:DULL BLACK BRONZING.
C
Nonestab
37) NUT CLAMPING AS PER DRG NO MCT 3163[74]()
Specification : NUT CLAMPING AS PER DRG.NO.MCT-3163
C
Nonestab
38) NUT LOCKING SPECIAL DRG NO MCT 3112 FOR SIGHT DIAL 104A[74]()
17) CELL FOR FILTER LIGHT ABSORBING OPTICAL INSTUMENT AS PER DRG NO IRDE 335 47 SHT NO 2[74]()
Specification : CELL FOR FILTER ,LIGHT ABSORBING,
OPTICAL INSTUMENT AS PER DRG. NO.
IRDE-335/47 SHT NO. 2
C
Estab
18) CELL ERECTOR TO DRG NO MCT 2918 1[74]()
Specification : CELL ERECTOR TO DRG.NO. MCT-2918/1 FOR D/S TELE.5.56MM RIFLE
C
Estab
19) CELL GRATICULE TO DRG MCT 1143 1 FOR SIGHT UNIT CASED 102B[74]()
Specification : CELL GRATICULE TO DRG.MCT-1143/1
FOR SIGHT UNIT CASED 102B
C
Estab
20) CELL OPTICAL INSTRUMENTS ERECTOR AS PER DRG NO IRDE 2605 9[74]()
Specification : CELL OPTICAL INSTRUMENTS (ERECTOR) AS PER DRG.NO. IRDE-2605/9.
C
Estab
21) CELL OUTER DRG NO IRDE 2048 129[74]()
Specification : CELL OUTER DRG NO.IRDE-2048/129
C
Estab
22) CLAMP FINISH TO DRG NO MCT 2103[74]()
Specification : CLAMP(FINISH) TO DRG NO. MCT-2103
C
Estab
23) CLAMP SCREW ADJUSTABLE DRG NO IRDE 1166 4 FOR COLLIMETER INFINITY[74]()
Specification : CLAMP SCREW ADJUSTABLE DRG.NO.IRDE-1166/4 FOR COLLIMETER INFINITY
C
Estab
24) CONTAINER AS PER DRG NO IRDE 335 68[74]()
Specification : CONTAINER AS PER DRG.NO.:IRDE-335/68
C
Estab
25) CORRUGATED CARTON BOX DRG ODD M 2546 2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER[74]()
Specification : CORRUGATED CARTON BOX DRG.ODD/M/2546/2 THE THICKNESS OF CORRUGATED BOARD WIL BE 7 PLY . A BITUMEN SHEET TO BE PASTED BETWEEN TWO OUTER LAYER OF PAPER.
C
Estab
26) FLAT HD BRASS RIVET FOR S 102B[17]()
Specification : FLAT HD BRASS RIVET 2.8X8(AS SHOP)FOR S. 102B.
C
Estab
27) FORE SIGHT DRG NO IRDE 1035 57[74]()
Specification : FORE SIGHT DRG.NO.IRDE-1035/57
C
Estab
28) FORE SIGHT TO DRG NO MCT 3106 FOR MT TELESCOPE 102A[74]()
Specification : FORE SIGHT TO DRG.NO.- MCT-3106 FOR MT.TELESCOPE 102A W.O.34258.
C
Estab
29) KNOB TO DRG MCT 1150 2 FOR SIGHT UNIT CASED 102B[74]()
Specification : KNOB TO DRG, MCT-1150/2
FOR SIGHT UNIT CASED 102B
C
Estab
30) KNOB TO DRG NO MCT 3096 FOR MT TLESCOPE 102A[74]()
Specification : KNOB TO DRG.NO. MCT-3096.FOR MT.TLESCOPE 102A
C
Estab
31) KNOB TO DRG NO MCT 3245 FOR SIGHT DIAL 104A[74]()
Specification : KNOB TO DRG.NO.MCT-3245 FOR SIGHT DIAL 104A
C
Estab
32) KNOB TO DRG NO MCT 2710 FOR INDICATOR FUZE 105 37[74]()
Specification : KNOB TO DRG.NO.MCT-2710 FOR INDICATOR FUZE , 105/37.
C
Estab
33) LEVER DRG NO CII 125[74]()
Specification : LEVER DRG.NO.CII-125
C
Estab
34) LEVER DRG NO IRDE 2048 139[74]()
Specification : LEVER DRG NO.IRDE-2048/139
C
Estab
35) NUT AS PER DRG NO AU8 934 008[74]()
Specification : NUT AS PER DRG.NO. AU8.934.008
C
Estab
36) NUT BRASS HEXAGONAL M3 FOR PLOTTER 81MM MORTAR CASED 101A FINISH DULL BLACK BRONZING[17]()
Specification : NUT BRASS HEXAGONAL M3 FOR PLOTTER 81MM MORTAR CASED 101A. FINISH:DULL BLACK BRONZING.
C
Estab
37) NUT CLAMPING AS PER DRG NO MCT 3163[74]()
Specification : NUT CLAMPING AS PER DRG.NO.MCT-3163
C
Estab
38) NUT LOCKING SPECIAL DRG NO MCT 3112 FOR SIGHT DIAL 104A[74]()
Specification : PVC SHEET FOR BAG KIT
SPEC.- AS PER ANNEXURE 'B' OF SPECN: NO.S/2532/BAG KIT UNIVERSAL(OG)/TC-6(a).
R
Estab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PIN LOCKING PISTOL GRIP FOR JVPC
Description : PIN LOCKING PISTOL GRIP FOR JVPC()
Specification : PIN LOCKING PISTOL GRIP FOR JVPC 5.56MM DRG.NO.0204-03-04-00-09-001-00DA
C
Estab
Category : ddp
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROTECTOR SUPPORT SCREW FOR MAG
Description : SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROTECTOR SUPPORT SCREW FOR MAG()
Specification : SCREW MACHINE FOR PLUG OBTURATIVE HOLE FOR INFRARED RAY PROTECTOR SUPPORT SCREW FOR MAG DS CAT NO. 5305-011218 DC (I) NO.27020-SA DT. 28.01.17 IN FINISHED CONDITION.
C
Estab
2) RIVET COCKING H GUIDE AND LOCKING SHOULDER FOR MAG
Description : RIVET COCKING H GUIDE AND LOCKING SHOULDER FOR MAG()
Specification : RIVET,COCKING H GUIDE & LOCKING SHOULDER TO DRG NO. SKM 876D*1 FOR COCKING HANDLE & SHOULDER LOCKING
C
Estab
3) PIN STRAIGHT HEADLESS SECURING CHAMBER for MAG
Description : PIN STRAIGHT HEADLESS SECURING CHAMBER for MAG()
1) GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA[70]()
Specification : GAS CYLINDER COVER MOULDING FOR JVPC DRG NO. 0204-03-02-00-00-001-00DA
C
Nonestab
2) LEVER LOCK GAS CYLINDER WELDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-13-000-00DB CONSISTING OF LEVER LOCKING GAS CYLINDER, PIN LEVER LOCKING GAS CYLINDER[70]()
Specification : LEVER LOCK GAS CYLINDER WELDING FOR JVPC 5.56 X 30MM DRG NO. 0204-03-03-01-13-000-00DB CONSISTING OF LEVER LOCKING GAS CYLINDER, PIN LEVER LOCKING GAS CYLINDER
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Buffer for JVPC[70]()
Specification : Buffer for JVPC 5.56MM X 30MM DRG No. 0204-03-02-03-22-005-00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Rod Rear Spring Recoil for JVPC[70]()
Specification : Rod Rear Spring Recoil for JVPC 5.56 DRG No. 0204 03 04 00 06 002 00DA
Specification : PLATE FOR HINGE FOR AMMUNITION BOX H2A
PLATE FOR HINGE, DRG NO. ISV:1752.
REQUIRED FOR AMMUNITION BOX H2A.
DRG. NO. ISV-1752
C
Nonestab
Category : dp
Grade : Grade II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) BAG 3 A/L CANVAS TO DRG NO ARDE 2125,DET NO.1, PART NO ISV 532 A[21]()
Specification : AS PER CQA(A) SPECN.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) HOLSTER MADE OF LEATHER TO ACCOMMODATE MODIFIED O.32 PISTOL TO DRG. NO-CTM-0133[70]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) PLASTIC CONTAINER NO P-11 WITH SLEEVES FOR CCJC[60]()
Specification : AS PER CQA(A) SPECN.
C
Nonestab
2) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]()
Specification : CQA(A)2804
C
Nonestab
3) CONTAINER NO RI MKI (IN) (EMPTY ASSY) TO DRG.NO ARDE 2025 DETAIL NO 1[65]()
Specification : DRG.NO ARDE 2025 DETAIL NO 1
C
Nonestab
4) CONTAINER 38 B WITH SLEEVE A & B &[6573780180]()
Specification : DESGN REF NO. CIA/AMN/2008
C
Nonestab
5) AMN.CONT. 67A,BOTTOM & TOPSLEEVE MR[60]()
Specification : DRG.NO ARDE 2065 DET. 5 PART NO. ISV 521 A
C
Nonestab
6) CONTAINER TO DRG NO.HEMRL DRG 1396 DET NO.3 PART NO IQX 1032 WITH LID FOR CONTAINER DRG NO. HEMRL DRG 1396 DET NO.5 PART NO. IQX 1034 AND CAP CONTAINER DRG NO.HEMRL DRG 1396 DET NO. 4 PART NO. IQX 1033[60]()
Specification : DRG 1396 PART NO IQX 1032, PART NO. IQX 1034, PART NO. IQX 1033
C
Nonestab
7) CONTAINER NO. P-17,ARDE 1910 DET 1TO5 ERU204[6584190000]()
8) CONTAINER TO DRG NO ARDE-1933 DET NO 4, PT.NO.ITV 170, SPECN CQA (A) 2322[60]()
Specification : CQA (A) 2322
C
Nonestab
9) CHARGE HOLDER TO DRG.NO.KF/SK-1746[60]()
Specification : DGOF 135
C
Nonestab
10) WASHER SEALING TO DRG AFK/SK/2187[63]()
Specification : DRG NO AFK/SK/2187 SHEET NO 1
C
Nonestab
11) CONTAINER NO.P-14 TO HOLD CARTGS[60]()
Specification : CQA(A) 2804
C
Nonestab
12) CONTAINER 47B DES REF CIA/AMN/2483[65]()
Specification : CQA(A) 2804
C
Nonestab
13) CONTAINER FOR BOOSTER CHARGE 130-02-016M[60]()
Specification : DRG NO. NAI(V) 7002 (PROV) DT.23.7.04 WITH 2 NOS OF SPARE O RING TO DRG. NO. NAI (V) 7002/2 (PROV) DT. 23.7.04
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Dehradun
Name
Specification
Use
Status
1) Housing EP to drg.CWC/229/32/2[74]()
Specification : Housing EP to drg. CWC/229/32/2
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) BRUSH CLEANING BRACKET AND CYLINDER GAS[71]()
Specification : BRUSH CLEANING BRACKET,& CYLINDER GAS TO DRG.NO-CQA(SA)SK-459,DS CAT NO-1005-560082. DC(1)NO-26532-SA,DTD-30.07.2010.
C
Nonestab
2) WASHER EJECTOR ROD FOR REVOLVER SIDE SWING[70]()
Specification : WASHER EJECTOR ROD FOR REVOLVER 0.32 SIDE SWING DRG. NO. RV-04/7 SW.
C
Nonestab
3) Rod Finish as per drawing no SK 6503 TE[70]()
Specification : Rod Finish as per drawing no SK 6503 TE
C
Nonestab
4) Guide Rod Finish as per drawing no SK 6504 TE[70]()
Specification : Guide Rod Finish as per drawing no SK 6504 TE
C
Nonestab
5) SPRING AS PER DRAWING NO SK 6517 TE[70]()
Specification : SPRING AS PER DRAWING NO SK 6517 TE
C
Nonestab
6) MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE[70]()
Specification : MAGAZINE LATCH AS PER DRAWING NO SK 6520 TE
C
Nonestab
7) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
8) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
2) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
3) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
4) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) LDPE Sheet for Cap Balaclava OG Peak Interlining[21]()
Specification : LDPE SHEET FOR CAP BALACLAVA OG PEAK INTERLINING FOR ALL SIZES SPECN. NO.1 APPENDIX "B " TO JSS.8405 ;25: 2010 REV NO.1 AMD NO.1&2. AND DRAWING AS PER APPENDIX "B" & "D" RESPECTIVELY PROV. SPECN NO. S/5094/TC/-1 (b)/Cap Bal OG(Imp) AS
2) 6043000400 ADAPTER NOSE FOR 81MM MK 1L TV 44[60]()
Specification : ADAPTER NOSE MORTAR BOMB NO. 1 TO DRG.PT.NO. TV 44 DC 36904-A DT.20/06/2003.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6044000103 HALF CUP 120MM DRG ISV 1740 PLASTIC[60]()
Specification : JSS 9330-01.
C
Nonestab
2) 2029992283 RING SECURING ISV 1122[20]()
Specification : SECURING RING,DRG.PART NO.ISV-1122, DC 35975-A.
C
Nonestab
3) 6572129006 CONTAINER 38 B WITHOUT FITMENTS[65]()
Specification : CQA(A) 2804(M)
C
Nonestab
4) 6143010220 HALF CUP B 81MM DRG ISV 862 PLASTIC[61]()
Specification : HALF CUP'B'(PLASTIC) TO DRG.PART NO.ISV-862 DC-36693-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6473200461 WASHER NITRILE TO DRG NO 155 1120[64]()
Specification : WASHER, MAT.:NITRILE BLACK SHORE HARDNESS 80+-5 TO DES.REF. 155-1120 DC NO. 36792-A DT. 01.11.2001 FOR SHELL 155 MM HE BB M1A4.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6173500400 WASHER STEEL ITX 241[61]()
Specification : WASHER (STEEL) TO DRG. PT. NO. ITX 241 DC 35824-A SPECN. IA-1285(B) DC 35203-A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6220822317 CONTAINER WITH DISC TO DRG PT NO ITV 21 DC 36747 A[62]()
Specification : CONTAINER WITH DISC TO DRG.PT.NO.ITV 21 DC 36747-A SPECN. NO. CQA(A) 2303(F) DC 36747-A FOR BOMB 120 MM MORTAR.MATERIAL:-NYLON REINFORCED (BACKED) CELLULOID SHEET. COLOURED RATIO:--RED: LIGHT BLUE:: 4 : 3. PACKING AS PER DRAWING NUM
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALLISTIC CAP ASSY.5209 540 FOR 551[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BASE PLATE TO DRG.NO.6436977[99]()
Specification : BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BASE PLATE 8.5 MM FOR HE/ILLG[61]()
Specification : BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVO
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) LINER SCREW DRG.NO.TRD-1-2-2321(551[99]()
Specification : LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) LOCK WASHER JZE-2.55 (HEAT-551)[99]()
Specification : LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) RIVET 2X10 TO DRG.NO.TRD-1-2-2239[99]()
Specification : RIVET 2x10 TO DRG.NO.TRD-1-2-2239.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SPACER TO DRG.NO.TRD-2-2-2273[99]()
Specification : SPACER TO DRG.NO.TRD-2-2-2273.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUPPORTING RING TO DRG.NO.TRD222272[99]()
Specification : SUPPORTING RING TO DRG.NO.TRD-2-2-2272.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ALUMINIUM DISC,THICK .05MM,DIA 10MM[99]()
Specification : ALUMINIUM(DISC)COVER THICKNESS= 0.05 MM ,DIA = 10MM.TO DRG. NO. F1334-154820 B DC-35529-A DT.14/08/93.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM SPECN F1301-905060-P[99]()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PLUNGER BLANK FOR 84 HEAT 551 LF 9911357919[99]()
Specification : PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.
C
Nonestab
2) PRIMER GASKET F1301 036530 D LF 2013436143[20]()
Specification : PRIMER GASKET TO DRG NO-F1301-036530-D DC NO.36783-A DT 19/9/01 INDEGENOUS MATERIAL SPECN:-IND/ME/884:2015 COMPOUND NO: C-60 HARDNESS DEGREE BS-60(+5/-4) DC NO. 5403-ME DATE1-02-2016 COMPATIBLE WITH RDX TNT.
C
Nonestab
3) SLIDING DISC PART NO 6413413 LF 9911358440[99]()
Specification : SLIDING DISC PART NO.6413413 TO OEM DRG.NO.304052464/ TRD.DRG.NO.1.2.2627
R
Nonestab
4) SLIPPING RING PART NO 6414119 LF 9911358441[99]()
Specification : SLIPPING RING PART NO.6414119 TO OEM DRG.NO.301069467/ TRD.DRG.NO.1.2.2592
R
Nonestab
5) WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670[99]()
Specification : WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) TANK FOR SERVICING OF AIR CLEANER CASSETTE / 175.91.050CB-1[06]()
Specification : TANK FOR SERVICING OF AIR CLEANER CASSETTE / 175.91.050CB-1
E
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD WIND CIRCULAR TO DRG. NO.7320.000012[06]()
Specification : DRG. NO.7320.000012
E
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) COVER RETAINER ASSEMBLY DRG No SK 6667 TE[70]()
Specification : COVER RETAINER ASSEMBLY DRG No SK- 6667/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
2) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
3) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) LEAD RING TO DRG.NO.b III 8.249.034
Description : LEAD RING TO DRG.NO.b III 8.249.034()
Specification : LEAD RING TO DRG.NO.b III 8.249.034 DC NO. 36310-A,DT-14.07.97.
4) POLYTHENE BAG TO DRG.CIA/AMN/2185
Description : POLYTHENE BAG TO DRG.CIA/AMN/2185()
Specification : POLYTHENE BAG TO DRG.CIA/AMN/2185, DET.NO-10,PART NO.ISV-1627,DC NO.36832-A, DT.10.05.02.MATERIAL LOW DENSITY POLYETHYLENE TYPE-1 TO SPECN:JSS-9330-03:2014 REV-3 DC NO.5292 ME, DT.16.12.14, SIZE-1170MM x 300MM x0.5 MM THICK.
C
Estab
5) ANVIL TO DRG NO 9 0643
Description : ANVIL TO DRG NO 9 0643()
Specification : ANVIL TO DRG.NO.9-0643/9- -104/3, DC 36309-A, DT.14.07.97.
C
Estab
6) CAP TO DRG NO 9 0643
Description : CAP TO DRG NO 9 0643()
Specification : CAP TO DRG.NO.9-0643/9- -104/1, DC.34183-A, DT-28.07.87.
1) FORGING TO DRG 64C 2007 200 E3 WITH FIRMS MATERIAL REQD FOR SEMI RING C2007[70]()
Specification : AS PER DRG OF FORGING TO DRG 64C 2007 200 E3.
WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) COVER GUN MUZZLE FOR TAR AS PER DRG NO TAR K 9029 STAR[70]()
Specification : COVER GUN MUZZLE FOR TAR AS PER DRG NO. TAR K 9029 STAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM[70]()
Specification : MFG and supply of handle carrying assembly POLYMER AS PER THE DRAWING NO 27P 6300 FOR RIFLE 7 62MM
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Bhandara
Name
Specification
Use
Status
1) BARRELS 200 LITRES[14]()
Specification : BARRELS 200 LITRES CAPACITY WITH LID (EMPTY DRUMS M.S ) DRG NO, OFBA/NC/189 ATTACHED
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR[10]()
Specification : MFG AND SUPPLY OF TUBE RETURN SPRING TO DRG NO ICR 1311 WITH OFT MATERIAL DC NO 27069 SA DT 05 05 2017 DS CAT NO 1005 001642 FOR RIFLE SLR
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417[00]()
Specification : ASSY CLAMP SHACKLE TO DRG NO ADRDE 1417
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF PLATE BUTT ASSEMBLY TO DRG NO TEND 1911 ICR 66A WITH PLATE BUTT TO DRG NO TEND 1836 STAR 2 REQUIRED FOR 7 62MM SLR[70]()
Specification : SUPPLY OF PLATE BUTT ASSEMBLY TO DRG NO TEND 1911 ICR 66A WITH PLATE BUTT TO DRG NO TEND 1836 STAR 2 REQUIRED FOR 7 62MM SLR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Clip Cover for revolver side swing DRG No SK 6274R SW[70]()
Specification : Clip Cover for revolver side swing, DRG No.SK-6274R/SW
C
Nonestab
2) AMMUNITION POUCH FOR GPMG[70]()
Specification : AMMUNITION POUCH FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6251*1
C
Nonestab
3) SPARE PART BAG FOR CARRIAGE OF SPARE BARREL SPARES AND TOOLS[70]()
Specification : SPARE PART BAG FOR CARRIAGE OF SPARE BARREL, SPARES AND TOOLS AS PER DRG. NO. SK-6133*
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) CARRY BAG FOR REVOLVER[70]()
Specification : CARRY BAG TO SIZE 300MM X 330MM (PRINTING IN THREE COLOURS ON THOUSER PAPER HAVING THICKNESS AS PER 65 GSM) FOR REV.32. AS PER ATTACHED SAMPLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Wheel Rear Sight for 9X19 mm Machine Pistol[70]()
Specification : Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA
C
Nonestab
2) Rear sight for 9X19 mm Machine Pistol[70]()
Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA
C
Nonestab
3) Cleaning Rod with Brush and Pull Through TO DRG No SK 4142[70]()
Specification : Cleaning Rod with Brush and Pull Through TO DRG No SK 4142
C
Nonestab
4) BRUSH ASSEMBLY FOR ACCESSORIES IN CONTAINER ASSY FOR AK203 SAF DRG NO SK 6605TE[70]()
Specification : BRUSH ASSEMBLY FOR ACCESSORIES IN CONTAINER ASSY FOR AK203 SAF DRG NO SK 6605TE
1) GUARD HAND RIGHT for LMG
Description : GUARD HAND RIGHT for LMG()
Specification : GUARD HAND RIGHT SK-3145/23 GUARD HAND RIGHT TO DRG NO.AR DE SK-3145/23 IN F/D CONDN DC(I) NO 25916 SA DT 07/04/2004 (IN LEAF BROWN COLOUR)
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) GUARD HAND ASSY. FOR INSAS 5.56 MM()
AS PER DRAWING
C
Estab.
2) CATCH COCKING HANDLE FOR INSAS 5.56 MM()
AS PER DRAWING
C
Estab.
3) GUARD HAND LEFT & RIGHT FOR INSAS 5.56 MM()
AS PER DRAWING
C
Estab.
4) PLUNGER HOD FOR INSAS 5.56 MM()
AS PER DRAWING
C
Estab.
5) GROP PISTOL FOR INSAS 5.56 MM()
AS PER DRAWING
C
Estab.
6) CARRYING HANDLE (MOULDING) FOR INSAS 5.56 MM()
AS PER DRAWING
C
Estab.
Category : P
Grade : III
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) Guard Hand Assy. Upper (Steel Strip)
Description : Guard Hand Assy. Upper (Steel Strip)()
Specification : Guard Hand Assy. Upper (Steel Strip) as per DS CAT No. 1005-560046 Note-The item will be in dark blue gray colour, Colour Code-695, to Specn. IS 5:2007
C
Estab
2) GRIP PISTOL TO DS CAT NO 1005 560706
Description : GRIP PISTOL TO DS CAT NO 1005 560706()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618D C NO. 26579-SA , DT.07-03-2011.
C
Estab
3) CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
Description : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR()
Specification : CARRYING HANDLE MOULDING,TO DRG.NO.CQA(SA)SK-976, DS CATNO.5340-180076, DC(I)NO. 26579-SA DT. 07-03-11 IN FINI SHED COND. WITH ROD CARRYING HANDLE TO DRG. NO.3146/32,DS CAT NO. 1005-557932 IN BLACK COLOUR
7) GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE
Description : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE()
Specification : GRIP TO DS CAT NO.1005-000898 DC(I) NO.26357-SA,DT20.7.7 ANDDETAILS OF LATEST ISSUE COMPONENT TO BE OF MATERIAL.MOULD ING POWDER'MOULDING PLASTICS (PHENOLIC)TO SPECN JSS:1097 GR- Z/60/6 OR NYLON 66GP W/OGLASS FIBRE TO SPECN DEF/STAN 9
C
Estab
Category : p
Grade : 3
Size :
S
1) Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775
Description : 1.GUARD HAND ASSEMBLY FOR RIFLE 5.56MM DRG NO:1005-007775()
Specification : AS PER DRG.
C
Estab
2) GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
Description : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.()
Specification : GRIP PISTOL TO DS CAT NO. 1005-560706 , DC NO. 26580-SA DT.08-03-2011 WITH CLEANING UNIT ASSY.,DS CAT NO.4930-002618 D C NO. 26579-SA , DT.07-03-2011.
C
Estab
3) CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS
Description : CATCH COCKING HANDLE (MOULDING) FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
4) GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION
Description : GUARD HAND UPPER ASSY FOR LMG 5 56MM IN FINISHED CONDITION()
Specification : GUARD HAND UPPER ASSY. TO DS CAT NO.1005-560701,DC (I) NO. 26580-SA , DATED 08.03.11 FOR LMG 5.56MM IN FINISHED CONDITION.
C
Estab
5) CARRYING HANDLE MOULDING (FABRICATED) FOR SMALL ARMS
Description : CARRYING HANDLE MOULDING (FABRICATED) FOR SMALL ARMS()
Specification : AS PER DRAWING
C
Estab
6) GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)
Description : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)()
Specification : GUARD HAND RIGHT&LEFT(MOD.)DRG NO CQA(SA) SK-740,DS CAT NO.- 1005-560559 & CQA(SA)SK-739,DS CAT NO. 1005-560550 DC NO. 26550-SA DT.27-11-10 (ONE NO EACH OF GUARD HAND RIGHT & GUARD HAND LEFT TO BE PACKED TOGETHER TO MAKE ONE SET)
1) PUNCH AMMUNITION INDEX NO 6P AND 7P NO 1 MK 2 IN EMPTY TO DRG NO ARDE 2137 DET NO 1
Description : PUNCH AMMUNITION INDEX NO 6P AND 7P NO 1 MK 2 IN EMPTY TO DRG NO ARDE 2137 DET NO 1()
Specification : ARDE/SPECN/182/1976 (PART-I)
R
Estab
Category : p
Grade : 3
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) IGNITION ELEMENT()
04-44-79000-06105-4E
C
Established
2) PLUNGER GUIDE()
04-44-79000-06112-4E
C
Established
3) INNER CASE()
04-44-79000-06103-3E
C
Established
4) IGNITION ELEMENT (EMPTY)()
CQA(A)/AMN/3229
C
Established
5) PLUNGER()
04-44-79000-06111-4E
C
Established
6) HEAD TO DRG. NO. ARM/1225 A-3 DT.18.11.2005 SPECN: AIR 304-L()
AIR 304-L
C
Established
7) SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR BAGLINE CUTTER DRG NO. PTA-L-53--01-01-001-X()
ADE/PTA/ PYR/SPEC – 02
C
Established
8) SET OF 5 COMPONENTS FOR EXPLOSIVE BOLT M-10 SPECN:ADE/PTA/PYR SPEC-03()
ADE/PTA/PYR SPEC-03
C
Established
9) CABLE CUTTER (MODIFIED) SET OF EMPTIES ASSY DRG. NO. PTA-L-55-01-01-001-A (12 COMPONENTS)()
DRG. NO. PTA-L-55-01-01-001-A
C
Established
10) CASE (C.E.R.U.NO. 204 MK2) TO DRG. NO. ARDE/2165 DETAIL 2 SPECN. ARDE/SPECN/423()
ARDE/SPECN/423
C
Established
11) STEEL WASHER TO DRG.NO.ARDE/2165 DET-3 DT 28-9-92. SPECN. ARDE/SPECN/423()
ARDE/SPECN/423
C
Established
12) SET OF 13 COMPONENTS FOR SUB ASSEMBLY FOR PYROJACK DRG NO. PTA-L-52-01-01-001-X()
DRG NO. PTA-L-52-01-01-001-X
C
Established
13) COMPONENTS FOR SQUIB PSQ-6 CONSISTING 1) HOUSING 2) CERAMIC BASE 3) SLEEVE()
AS PER DGAQA SPECN.
C
Established
14) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C()
DRG. NO. F-1334-230761-C
C
Established
15) FIRING PIN TO CQA (A) SEALED DRG. NO. 04-749-130222-03.2E()
CQA (A) DRG. NO. 04-749-130222-03.2E
C
Established
16) IGNITER CASING CQA(A) SEALED DRG NO 04-749-130222-03.1E()
DRG NO 04-749-130222-03.1E
C
Established
17) SMOKE COMPOSITION CASING TO CQA[A] SEALED DRG NO 04-749-130222-05.1E()
DRG NO 04-749-130222-05.1E
C
Established
18) NOTCHED COIL TO DES. REF. ARDE 1933 DET. NO. 3, PT. NO. ITV 169 SPECN. CQA(A) 2322()
CQA(A) 2322
C
Non Established
Category : DDP,DP
Grade : II
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]()
Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A"
MedeQuip Services
KK HOUSE, PLOT NO. B-351, INDUSTRIAL ESTATE, SANATHNAGAR, HYDERABAD. ADJACENT LANE TO STATE BANK OF INDIA HYDERABAD Telangana
PIN1 : 500018
Phone No. : 23811122 GSTIN : 36AEDPK3760Q1Z1
DRG.NO.ARDE-2024 DET 10. AMENDED VIDE AL NO.650 DATED 16-3-90 CONSISTING OF-I)BASE PLATE TO DRG.NO.ARDE 2024 DET NO.11 II)ADAPTER TO DRG.NO.ARDE 2024 DET NO.12 AMMENDED VIDE AL650 DT.14.03.90.
C
Non Established
20) NUT FOR BOMB 3 KG PRACTICE ()
DRG.NO.ARDE 2024/DET NO.16
C
Non Established
21) DISC INDEX FOR 16MM RED()
DRG NO ARDE 1878 DET NO 7 PT NO IQW 201
C
Non Established
22) DISC INDEX FOR 16MM GREEN()
DRG NO ARDE 1878 DET NO 8.PT NO IQW 202
C
Non Established
23) DISC INDEX FOR 16MM WHITE()
DRG NO ARDE 1878 DET NO.9 PT NO IQW 203
C
Non Established
24) ADAPTER NOSE FOR MB 81MM INTERT/FLASH()
DRG. NO. DD(L)11855. PART TV-44
C
Non Established
25) BODY PROJECTILE 14.5MM ATA()
SPECN.NO.04 OF 749-0021-0012 DRG.NO.04-749-130222-01.1E
C
Non Established
26) BODY UPPER & BODY LOWER (FLASH 2A)()
BODY UPPER (FLASH 2A) TO DRG NO ARDE 2285,DET NO.1 PART NO. ITV 276 AND BODY LOWER (FLAHS 2A) TO DRG.NO. ARDE 2285, DET NO. 2, PART NO. ITV-277
C
Non Established
27) EMPTY COMPONENTS LOWR SET FOR BOMB 51MM ILLG. 1A()
1) CLAMP TO 6206213105
Description : CLAMP TO 6206213105()
Specification : 172.60.105
C
Estab
2) NIPPLE TO 6206213106
Description : NIPPLE TO 6206213106()
Specification : 172.60.106-1
C
Estab
3) WASHER TO 6206213116
Description : WASHER TO 6206213116()
Specification : 172.60.129
C
Estab
4) UNION TO 6206213133
Description : UNION TO 6206213133()
Specification : 172.60.172
C
Estab
5) CLAMPING STRIP SHEET 2 5 GOST 19903 74 4 IV 10KP RIMMING GOST 16523 70 TO 6206213144
Description : CLAMPING STRIP SHEET 2 5 GOST 19903 74 4 IV 10KP RIMMING GOST 16523 70 TO 6206213144()
Specification : 172.60.194-1
C
Estab
6) CLAMPING STRIP TO 6206213149
Description : CLAMPING STRIP TO 6206213149()
Specification : 172.60.205
C
Estab
7) CLAMPING STRIP TO 6206213164
Description : CLAMPING STRIP TO 6206213164()
Specification : 172.60.234
C
Estab
8) NUT TO 6206213191
Description : NUT TO 6206213191()
Specification : 175.60.059
C
Estab
9) CLAMPING STRIP TO 6206213204
Description : CLAMPING STRIP TO 6206213204()
Specification : 175.60.082
C
Estab
10) AXLE TO 6206213211
Description : AXLE TO 6206213211()
Specification : 175.60.117
C
Estab
11) CLAMP TO 6206213219
Description : CLAMP TO 6206213219()
Specification : 175.60.146
C
Estab
12) UNION TO 6206213220
Description : UNION TO 6206213220()
Specification : 175.60.159
C
Estab
13) CLAMP TO 6206213221
Description : CLAMP TO 6206213221()
Specification : 175.60.166
C
Estab
14) CLAMP TO 6206213222
Description : CLAMP TO 6206213222()
Specification : 175.60.167
C
Estab
15) PIPE UNION TO 6206213256
Description : PIPE UNION TO 6206213256()
Specification : 155.38.081-A
C
Estab
16) SWIVEL ELBOW TO 6206213272
Description : SWIVEL ELBOW TO 6206213272()
Specification : 155.38.262
C
Estab
17) UNION TO 6206213301
Description : UNION TO 6206213301()
Specification : 155.38.449
C
Estab
18) RIVET TO 6206213323
Description : RIVET TO 6206213323()
Specification : 54.26.071A
C
Estab
19) CLAMP TO 6206213415
Description : CLAMP TO 6206213415()
Specification : 155.38.414
C
Estab
20) PIPE TO 6206213420
Description : PIPE TO 6206213420()
Specification : 172.60.131CB-2CB
C
Estab
21) PIPE TO 6206213422
Description : PIPE TO 6206213422()
Specification : 172.60.133CB-1CB
C
Estab
22) BOLT TO 6206213436
Description : BOLT TO 6206213436()
Specification : 172.60.286
C
Estab
23) PIPE ASSY TO 6206213452
Description : PIPE ASSY TO 6206213452()
Specification : 172.60.154CBCB
C
Estab
24) PIPE ASSY TO 6206213453
Description : PIPE ASSY TO 6206213453()
Specification : 172.60.155CBCB
C
Estab
25) CLAMP TO 6206213471
Description : CLAMP TO 6206213471()
Specification : 172.60.282
C
Estab
26) CLAMPING BUSH TO 6206213524
Description : CLAMPING BUSH TO 6206213524()
Specification : ZB.400.00.04
C
Estab
27) SCREW TO 6206213575
Description : SCREW TO 6206213575()
Specification : EL620-K
C
Estab
28) RING TO 6206214114
Description : RING TO 6206214114()
Specification : 432.65.151
C
Estab
29) NUT TO 6206301025
Description : NUT TO 6206301025()
Specification : 54.01.006-1
C
Estab
30) SHIM TO 6206301031
Description : SHIM TO 6206301031()
Specification : 54.01.017
C
Estab
31) PIPE TO 6206302040
Description : PIPE TO 6206302040()
Specification : 176.31.030CB-1CB
C
Estab
32) PIPE TO 6206302057
Description : PIPE TO 6206302057()
Specification : 175.31.013CB-2CB
C
Estab
33) PIPE TO 6206302064
Description : PIPE TO 6206302064()
Specification : 175.31.027CB-2
C
Estab
34) PIPE TO 6206302080
Description : PIPE TO 6206302080()
Specification : 175.31.061CB-3CB
C
Estab
35) PIPE ASSY TO 6206302082
Description : PIPE ASSY TO 6206302082()
Specification : 175.31.063CB-2CB
C
Estab
36) BRACKET TO 6206302087
Description : BRACKET TO 6206302087()
Specification : 175.31.084CB
C
Estab
37) AXLE TO 6206302106
Description : AXLE TO 6206302106()
Specification : 172.31.116
C
Estab
38) CLAMP TO 6206302110
Description : CLAMP TO 6206302110()
Specification : 172.31.136
C
Estab
39) GUSSET PLATE TO 6206302152
Description : GUSSET PLATE TO 6206302152()
Specification : 172.31.307
C
Estab
40) CLAMP TO 6206302193
Description : CLAMP TO 6206302193()
Specification : 172.35.069
C
Estab
41) BUSH TO 6206302214
Description : BUSH TO 6206302214()
Specification : 176.31.026
C
Estab
42) CLAMPING BOLT TO 6206302235
Description : CLAMPING BOLT TO 6206302235()
Specification : 176.31.078
C
Estab
43) SPACER TO 6206302238
Description : SPACER TO 6206302238()
Specification : 176.31.081
C
Estab
44) CLAMP TO 6206302368
Description : CLAMP TO 6206302368()
Specification : 175.31.184
C
Estab
45) CLAMP TO 6206302386
Description : CLAMP TO 6206302386()
Specification : 175.31.219
C
Estab
46) CLAMP TO 6206302423
Description : CLAMP TO 6206302423()
Specification : 175.32.384
C
Estab
47) CLAMP TO 6206302425
Description : CLAMP TO 6206302425()
Specification : 172.2M.31.006
C
Estab
48) CLAMP TO 6206302426
Description : CLAMP TO 6206302426()
Specification : 172.2M.31.008
C
Estab
49) CLAMP TO 6206302445
Description : CLAMP TO 6206302445()
Specification : 165.05.104
C
Estab
50) CLAMP TO 6206302446
Description : CLAMP TO 6206302446()
Specification : 165.83.029
C
Estab
51) PLUG TO 6206302453
Description : PLUG TO 6206302453()
Specification : 54.05.028-1A
C
Estab
52) FLANGE TOP TO 6206303011
Description : FLANGE TOP TO 6206303011()
Specification : 176.31.051
C
Estab
53) PLATE TO 6206303013
Description : PLATE TO 6206303013()
Specification : 176.31.053
C
Estab
54) PLATE TO 6206303046
Description : PLATE TO 6206303046()
Specification : 432.31.167
C
Estab
55) YOKE TO 6206304004
Description : YOKE TO 6206304004()
Specification : 176.32.002CBCB
C
Estab
56) PIPE TO 6206304030
Description : PIPE TO 6206304030()
Specification : 175.32.035CB-1CB
C
Estab
57) PIPE TO 6206304041
Description : PIPE TO 6206304041()
Specification : 175.32.051CB-2
C
Estab
58) PIPE TO 6206304046
Description : PIPE TO 6206304046()
Specification : 175.32.065CB
C
Estab
59) PIPE TO 6206304055
Description : PIPE TO 6206304055()
Specification : 175.32.078CBCB
C
Estab
60) PIPE TO 6206304069
Description : PIPE TO 6206304069()
Specification : 175.32.107CB
C
Estab
61) BRANCH PIPE TO 6206304111
Description : BRANCH PIPE TO 6206304111()
Specification : 172.32.187CBCB
C
Estab
62) BRANCH PIPE ASSY TO 6206304112
Description : BRANCH PIPE ASSY TO 6206304112()
Specification : 172.32.188CBCB
C
Estab
63) BRANCH PIPE TO 6206304113
Description : BRANCH PIPE TO 6206304113()
Specification : 172.32.189CBCB
C
Estab
64) PIPE TO 6206304114
Description : PIPE TO 6206304114()
Specification : 172.32.190CB
C
Estab
65) STOPPER TO 6206304208
Description : STOPPER TO 6206304208()
Specification : 175.32.104
C
Estab
66) BUSH TO 6206304211
Description : BUSH TO 6206304211()
Specification : 175.32.110
C
Estab
67) CLAMP TO 6206304215
Description : CLAMP TO 6206304215()
Specification : 175.32.117
C
Estab
68) BOSS TO 6206304230
Description : BOSS TO 6206304230()
Specification : 175.32.141
C
Estab
69) CLAMP TO 6206304243
Description : CLAMP TO 6206304243()
Specification : 175.32.160-1
C
Estab
70) CLAMP TO 6206304244
Description : CLAMP TO 6206304244()
Specification : 175.32.161
C
Estab
71) CLAMP TO 6206304249
Description : CLAMP TO 6206304249()
Specification : 175.32.172
C
Estab
72) CLAMP TO 6206304250
Description : CLAMP TO 6206304250()
Specification : 175.32.173
C
Estab
73) BOLT TO 6206304251
Description : BOLT TO 6206304251()
Specification : 175.32.175-2A
C
Estab
74) CLAMP TO 6206304258
Description : CLAMP TO 6206304258()
Specification : 175.32.200
C
Estab
75) UNION TO 6206304267
Description : UNION TO 6206304267()
Specification : 175.32.216-1
C
Estab
76) CLAMP TO 6206304295
Description : CLAMP TO 6206304295()
Specification : 175.32.310
C
Estab
77) CLAMP TO 6206304296
Description : CLAMP TO 6206304296()
Specification : 175.32.311
C
Estab
78) CLAMP TO 6206304328
Description : CLAMP TO 6206304328()
Specification : 175.32.385-A
C
Estab
79) CLAMP TO 6206304329
Description : CLAMP TO 6206304329()
Specification : 175.32.386
C
Estab
80) CLAMP TO 6206304330
Description : CLAMP TO 6206304330()
Specification : 175.32.387
C
Estab
81) CLAMP TO 6206304393
Description : CLAMP TO 6206304393()
Specification : 172.32.450
C
Estab
82) BOLT TO 6206304488
Description : BOLT TO 6206304488()
Specification : 172.33.526-01
C
Estab
83) BOLT TO 6206304489
Description : BOLT TO 6206304489()
Specification : 172.33.526-02
C
Estab
84) UNION PIPE TO 6206304492
Description : UNION PIPE TO 6206304492()
Specification : 172.66.008
C
Estab
85) PIPE UNION TO 6206304493
Description : PIPE UNION TO 6206304493()
Specification : 172.66.033
C
Estab
86) GASKET TO 6206304496
Description : GASKET TO 6206304496()
Specification : 172.33.567
C
Estab
87) GASKET TO 6206304497
Description : GASKET TO 6206304497()
Specification : 172.33.567-01
C
Estab
88) GASKET TO 6206304498
Description : GASKET TO 6206304498()
Specification : 172.33.567-02
C
Estab
89) PACKING RING TO 6206304530
Description : PACKING RING TO 6206304530()
Specification : 155.03.262
C
Estab
90) WASHER LOCK TO 6206304784
Description : WASHER LOCK TO 6206304784()
Specification : ED.20.042
C
Estab
91) WASHER TO 6206304785
Description : WASHER TO 6206304785()
Specification : ED20.041
C
Estab
92) SUB ASSY PIPE TO 6206305007
Description : SUB ASSY PIPE TO 6206305007()
Specification : 176.33.019CB
C
Estab
93) ASSY PIPE TO 6206305037
Description : ASSY PIPE TO 6206305037()
Specification : 175.33.058CB-1CB
C
Estab
94) ASSY PIPE TO 6206305038
Description : ASSY PIPE TO 6206305038()
Specification : 175.33.059CB-1
C
Estab
95) ASSY PIPE TO 6206305049
Description : ASSY PIPE TO 6206305049()
Specification : 175.33.095CB-1CB
C
Estab
96) SUB ASSY PIPE TO 6206305050
Description : SUB ASSY PIPE TO 6206305050()
Specification : 175.33.096CB-1
C
Estab
97) SUB ASSY PIPE TO 6206305052
Description : SUB ASSY PIPE TO 6206305052()
Specification : 175.33.103CB-2CB
C
Estab
98) SUB ASSY PIPE BRANCH TO 6206305114
Description : SUB ASSY PIPE BRANCH TO 6206305114()
Specification : 150.05.28CBCB
C
Estab
99) PIPE TO 6206305133
Description : PIPE TO 6206305133()
Specification : 176.33.017-1
C
Estab
100) CAP TO 6206305137
Description : CAP TO 6206305137()
Specification : 176.33.021
C
Estab
101) PIPE TO 6206305142
Description : PIPE TO 6206305142()
Specification : 176.33.028
C
Estab
102) CLAMP TO 6206305331
Description : CLAMP TO 6206305331()
Specification : 175.33.326-1
C
Estab
103) CLAMP TO 6206305343
Description : CLAMP TO 6206305343()
Specification : 175.33.350-1
C
Estab
104) PIPE UNION TO 6206305442
Description : PIPE UNION TO 6206305442()
Specification : 172.33.381
C
Estab
105) WASHER TO 6206305462
Description : WASHER TO 6206305462()
Specification : 172.33.514
C
Estab
106) SHIELD TO 6206305502
Description : SHIELD TO 6206305502()
Specification : 172.33.582
C
Estab
107) CLAMP TO 6206305561
Description : CLAMP TO 6206305561()
Specification : 155.05.653
C
Estab
108) PLUG TO 6206305565
Description : PLUG TO 6206305565()
Specification : 155.05.713
C
Estab
109) CLAMP TO 6206305589
Description : CLAMP TO 6206305589()
Specification : 54.02.402B
C
Estab
110) CLAMP TO 6206305590
Description : CLAMP TO 6206305590()
Specification : 54.03.071A
C
Estab
111) CLAMP TO 6206305873
Description : CLAMP TO 6206305873()
Specification : 172.33.730
C
Estab
112) CLIP TO 6206305935
Description : CLIP TO 6206305935()
Specification : 175.33.326-2
C
Estab
113) BOSS TO 6206305953
Description : BOSS TO 6206305953()
Specification : 172.33.727
C
Estab
114) BRANCH PIPE TO 6206306010
Description : BRANCH PIPE TO 6206306010()
Specification : 176.34.009CBCB
C
Estab
115) PLUG TO 6206306016
Description : PLUG TO 6206306016()
Specification : 172.34.065CBCB
C
Estab
116) CLIP TO 6206306068
Description : CLIP TO 6206306068()
Specification : 172.34.228
C
Estab
117) TUBE ASSY TO 6206307012
Description : TUBE ASSY TO 6206307012()
Specification : 175.35.012CB-1
C
Estab
118) BOLT TO 6206307016
Description : BOLT TO 6206307016()
Specification : 172.35.014
C
Estab
119) BOLT TO 6206307024
Description : BOLT TO 6206307024()
Specification : 172.35.066
C
Estab
120) CLAMP TO 6206307094
Description : CLAMP TO 6206307094()
Specification : 175.35.034-1
C
Estab
121) WIRE ROPE TO 6206308026
Description : WIRE ROPE TO 6206308026()
Specification : 172.36.077CB
C
Estab
122) AXLE TO 6206308063
Description : AXLE TO 6206308063()
Specification : 172.36.119-01
C
Estab
123) STRIP TO 6206308127
Description : STRIP TO 6206308127()
Specification : 175.36.016
C
Estab
124) STRAP TO 6206308129
Description : STRAP TO 6206308129()
Specification : 175.36.018
C
Estab
125) GASKET TO 6206308131
Description : GASKET TO 6206308131()
Specification : 175.36.020
C
Estab
Category : p
Grade : 2
Size :
S
1) Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) GASKET TO 6206308132
Description : GASKET TO 6206308132()
Specification : 175.36.021
C
Estab
2) NUT TO 6206308155
Description : NUT TO 6206308155()
Specification : 175.36.073
C
Estab
3) LOCK WASHER TO 6206308322
Description : LOCK WASHER TO 6206308322()
Specification : M240.26.085
C
Estab
4) LOCK WASHER TO 6206309011
Description : LOCK WASHER TO 6206309011()
Specification : 432.36.139-1
C
Estab
5) INJECTOR RH TO 6206310003
Description : INJECTOR RH TO 6206310003()
Specification : 175.37.002CB-ACB
C
Estab
6) INJECTOR LH TO 6206310004
Description : INJECTOR LH TO 6206310004()
Specification : 175.37.003CB-ACB
C
Estab
7) PIPE LINE TO 6206310008
Description : PIPE LINE TO 6206310008()
Specification : 175.37.013CB-4ACB
C
Estab
8) STRAP TO 6206310011
Description : STRAP TO 6206310011()
Specification : 175.37.024CB
C
Estab
9) CLAMP TO 6206310031
Description : CLAMP TO 6206310031()
Specification : 175.37.045
C
Estab
10) CLAMP TO 6206310032
Description : CLAMP TO 6206310032()
Specification : 175.37.046
C
Estab
11) BOLT TO 6206310033
Description : BOLT TO 6206310033()
Specification : 175.37.048
C
Estab
12) CLAMP TO 6206310038
Description : CLAMP TO 6206310038()
Specification : 175.37.061
C
Estab
13) CLAMP TO 6206310040
Description : CLAMP TO 6206310040()
Specification : 175.37.063
C
Estab
14) HOUSING TO 6206401048
Description : HOUSING TO 6206401048()
Specification : 172.40.203
C
Estab
15) BUSH TO 6206401091
Description : BUSH TO 6206401091()
Specification : 172.40.265
C
Estab
16) HOUSING RH TO 6206401112
Description : HOUSING RH TO 6206401112()
Specification : 175.40.014-1
C
Estab
17) BUSH TO 6206401145
Description : BUSH TO 6206401145()
Specification : 175.40.051
C
Estab
18) RING TO 6206401162
Description : RING TO 6206401162()
Specification : 175.40.136-07
C
Estab
19) PLUG TO 6206401188
Description : PLUG TO 6206401188()
Specification : 432.40.095-1
C
Estab
20) WASHER LOCK TO 6206401220
Description : WASHER LOCK TO 6206401220()
Specification : 54.40.158
C
Estab
21) RING STEEL 65G GOST 14959 79 EQUI MATL EN 42J BS 970 PT I 1983 TO 6206401275
Description : RING STEEL 65G GOST 14959 79 EQUI MATL EN 42J BS 970 PT I 1983 TO 6206401275()
Specification : 172.40.375
C
Estab
22) PLUG TO 6206401280
Description : PLUG TO 6206401280()
Specification : CQA(HV)5.40.001
C
Estab
23) LOCKING WASHER TO 6206402013
Description : LOCKING WASHER TO 6206402013()
Specification : 175.41.011
C
Estab
24) ADJUSTING RING TO 6206402026
Description : ADJUSTING RING TO 6206402026()
Specification : 175.41.038-08
C
Estab
25) ADJUSTING RING TO 6206402030
Description : ADJUSTING RING TO 6206402030()
Specification : 175.41.038-12
C
Estab
26) LOCKING WASHER TO 6206402044
Description : LOCKING WASHER TO 6206402044()
Specification : 175.41.061
C
Estab
27) THROAT CAP GASKET TO 6206402102
Description : THROAT CAP GASKET TO 6206402102()
Specification : 54.08.195
C
Estab
28) SHIM TO 6206402103
Description : SHIM TO 6206402103()
Specification : 54.08.196
C
Estab
29) RING TO 6206403035
Description : RING TO 6206403035()
Specification : 175.42.010-01
C
Estab
30) RING TO 6206403036
Description : RING TO 6206403036()
Specification : 175.42.010-02
C
Estab
31) PIN TO 6206405035
Description : PIN TO 6206405035()
Specification : 175.44.009-1
C
Estab
32) NUT COUPLING TO 6206405040
Description : NUT COUPLING TO 6206405040()
Specification : 175.44.016
C
Estab
33) WASHER TO 6206406101
Description : WASHER TO 6206406101()
Specification : 172.45.154
C
Estab
34) RING SPRING TO 6206406201
Description : RING SPRING TO 6206406201()
Specification : 175.45.045
C
Estab
35) FILTER SHELL TO 6206406206
Description : FILTER SHELL TO 6206406206()
Specification : 175.45.049-A
C
Estab
36) NUT TO 6206406214
Description : NUT TO 6206406214()
Specification : 175.45.060
C
Estab
37) BOSS TO 6206406217
Description : BOSS TO 6206406217()
Specification : 175.45.064-1
C
Estab
38) WASHER TO 6206406230
Description : WASHER TO 6206406230()
Specification : 175.45.117
C
Estab
39) SHIM ADJUSTING TO 6206407044
Description : SHIM ADJUSTING TO 6206407044()
Specification : 172.46.071
C
Estab
40) SHIM ADJUSTING TO 6206407045
Description : SHIM ADJUSTING TO 6206407045()
Specification : 172.46.072
C
Estab
41) STOPPER TO 6206407064
Description : STOPPER TO 6206407064()
Specification : 172.45.089
C
Estab
42) LOCK WASHER TO 6206408110
Description : LOCK WASHER TO 6206408110()
Specification : 150.40.119
C
Estab
43) SPRING RING TO 6206409024
Description : SPRING RING TO 6206409024()
Specification : 432.40.064
C
Estab
44) BOLT TO 6206412043
Description : BOLT TO 6206412043()
Specification : 172.52.106
C
Estab
45) PLUG TO 6206412070
Description : PLUG TO 6206412070()
Specification : 175.52.065-1
C
Estab
46) RING TO 6206413016
Description : RING TO 6206413016()
Specification : 175.53.007-2
C
Estab
47) BOLT TO 6206413025
Description : BOLT TO 6206413025()
Specification : 175.53.022
C
Estab
48) BOLT TO 6206413026
Description : BOLT TO 6206413026()
Specification : 175.53.023
C
Estab
49) BOLT TO 6206413027
Description : BOLT TO 6206413027()
Specification : 175.53.024
C
Estab
50) NUT TO 6206415011
Description : NUT TO 6206415011()
Specification : 613.44.071
C
Estab
51) SCREW TO 6206416046
Description : SCREW TO 6206416046()
Specification : 155.15.129
C
Estab
52) BUSHING TO 6206417045
Description : BUSHING TO 6206417045()
Specification : 172.61.035
C
Estab
53) RING TO 6206417051
Description : RING TO 6206417051()
Specification : 172.61.061
C
Estab
54) AXLE TO 6206417098
Description : AXLE TO 6206417098()
Specification : 54.22.002
C
Estab
55) BUSH TO 6206417109
Description : BUSH TO 6206417109()
Specification : 54.22.045
C
Estab
56) STUD TO 6206418036
Description : STUD TO 6206418036()
Specification : 172.62.067
C
Estab
57) RING TO 6206418068
Description : RING TO 6206418068()
Specification : 172.62.107-01
C
Estab
58) AXLE TO 6206419108
Description : AXLE TO 6206419108()
Specification : 172.63.134
C
Estab
59) NUT TO 6206419143
Description : NUT TO 6206419143()
Specification : 175.63.031
C
Estab
60) SHANK TO 6206419151
Description : SHANK TO 6206419151()
Specification : 175.63.040
C
Estab
61) SCREW COUPLING TO 6206419174
Description : SCREW COUPLING TO 6206419174()
Specification : 175.63.072
C
Estab
62) AXLE TO 6206419185
Description : AXLE TO 6206419185()
Specification : 175.63.090
C
Estab
63) AXLE TO 6206419204
Description : AXLE TO 6206419204()
Specification : 432.63.143
C
Estab
64) CHECK NUT TO 6206419223
Description : CHECK NUT TO 6206419223()
Specification : 54.20.080
C
Estab
65) CARRIER TO 6206420051
Description : CARRIER TO 6206420051()
Specification : 176.64.029
C
Estab
66) COVER TO 6206420112
Description : COVER TO 6206420112()
Specification : 175.64.044
C
Estab
67) PIPE LINE ASSY TO 6206421015
Description : PIPE LINE ASSY TO 6206421015()
Specification : 175.66.017CBCB
C
Estab
68) PIPE LINE ASSY TO 6206421018
Description : PIPE LINE ASSY TO 6206421018()
Specification : 175.66.022CB-1
C
Estab
69) PIPE LINE ASSY TO 6206421024
Description : PIPE LINE ASSY TO 6206421024()
Specification : 175.66.034CB
C
Estab
70) TUBE ASSY TO 6206421026
Description : TUBE ASSY TO 6206421026()
Specification : 175.66.039CB-1CB
C
Estab
71) BRACKET ASSY TO 6206421028
Description : BRACKET ASSY TO 6206421028()
Specification : 175.66.042CBCB
C
Estab
72) PIPE LINE ASSY TO 6206421051
Description : PIPE LINE ASSY TO 6206421051()
Specification : 172.66.106CB-ACB
C
Estab
73) CLAMP TO 6206421065
Description : CLAMP TO 6206421065()
Specification : 172.2M.66.005
C
Estab
74) CLAMP TO 6206421088
Description : CLAMP TO 6206421088()
Specification : 175.66.016
C
Estab
75) CLAMP TO 6206421089
Description : CLAMP TO 6206421089()
Specification : 175.66.017
C
Estab
76) CLAMP TO 6206421144
Description : CLAMP TO 6206421144()
Specification : 175.66.118
C
Estab
77) CLAMP TO 6206421154
Description : CLAMP TO 6206421154()
Specification : 175.32.174-1
C
Estab
78) UNION PIPE TO 6206421158
Description : UNION PIPE TO 6206421158()
Specification : 172.66.012
C
Estab
79) CLAMP TO 6206421163
Description : CLAMP TO 6206421163()
Specification : 172.66.047
C
Estab
80) UNION PIPE TO 6206421165
Description : UNION PIPE TO 6206421165()
Specification : 172.66.053
C
Estab
81) CLAMP TO 6206421166
Description : CLAMP TO 6206421166()
Specification : 172.66.068
C
Estab
82) CLAMP TO 6206421178
Description : CLAMP TO 6206421178()
Specification : 172.66.142
C
Estab
83) CLAMP TO 6206421179
Description : CLAMP TO 6206421179()
Specification : 172.66.143
C
Estab
84) BOLT TO 6206421188
Description : BOLT TO 6206421188()
Specification : 172.66.225
C
Estab
85) CLAMP TO 6206421200
Description : CLAMP TO 6206421200()
Specification : 172.66.244
C
Estab
86) CLAMP TO 6206421206
Description : CLAMP TO 6206421206()
Specification : 172.66.258
C
Estab
87) CLAMP TO 6206421217
Description : CLAMP TO 6206421217()
Specification : 172.66.291
C
Estab
88) COVER ASSY TO 6206501073
Description : COVER ASSY TO 6206501073()
Specification : 172.70.190CB
C
Estab
89) BRACKET ASSY TO 6206501107
Description : BRACKET ASSY TO 6206501107()
Specification : 176.70.080CB
C
Estab
90) STRAP ASSY TO 6206501144
Description : STRAP ASSY TO 6206501144()
Specification : 175.70.170CB
C
Estab
91) GASKET TO 6206501157
Description : GASKET TO 6206501157()
Specification : 172.70.004
C
Estab
92) GASKET TO 6206501158
Description : GASKET TO 6206501158()
Specification : 172.70.005
C
Estab
93) GASKET TO 6206501198
Description : GASKET TO 6206501198()
Specification : 172.70.230
C
Estab
94) CLAMP TO 6206501258
Description : CLAMP TO 6206501258()
Specification : 172.70.381
C
Estab
95) DOWEL TO 6206501270
Description : DOWEL TO 6206501270()
Specification : 172.70.405
C
Estab
96) ROD TO 6206501301
Description : ROD TO 6206501301()
Specification : 172.70.495
C
Estab
97) BRACKET TO 6206501418
Description : BRACKET TO 6206501418()
Specification : 175.70.116
C
Estab
98) GASKET TO 6206501443
Description : GASKET TO 6206501443()
Specification : 175.70.224
C
Estab
99) NUT TO 6206501447
Description : NUT TO 6206501447()
Specification : 175.70.351
C
Estab
100) PIPE UNION TO 6206501494
Description : PIPE UNION TO 6206501494()
Specification : 175.04.152
C
Estab
101) CLAMP TO 6206501559
Description : CLAMP TO 6206501559()
Specification : 150.26.292
C
Estab
102) RING TO 6206501572
Description : RING TO 6206501572()
Specification : 54.26.070
C
Estab
103) PIN TO 6206501579
Description : PIN TO 6206501579()
Specification : 54.26.106
C
Estab
104) CLAMP TO 6206501591
Description : CLAMP TO 6206501591()
Specification : 54.26.493
C
Estab
105) BOLT TO 6206501616
Description : BOLT TO 6206501616()
Specification : 34.26.887
C
Estab
106) BOLT TO 6206501930
Description : BOLT TO 6206501930()
Specification : SG10.IS.006
C
Estab
107) BOLT TO 6206501936
Description : BOLT TO 6206501936()
Specification : G10.00.19
C
Estab
108) BRACKET TO 6206502066
Description : BRACKET TO 6206502066()
Specification : 172.71.159
C
Estab
109) STRIP TO 6206504073
Description : STRIP TO 6206504073()
Specification : 54.29.1022
C
Estab
110) CLAMP TO 6206507046
Description : CLAMP TO 6206507046()
Specification : 172.77.039
C
Estab
111) SCREW TO 6206508021
Description : SCREW TO 6206508021()
Specification : 434.80.049
C
Estab
112) SCREW TO 6206509057
Description : SCREW TO 6206509057()
Specification : 155.30.1386
C
Estab
113) BUSHING TO 6206509060
Description : BUSHING TO 6206509060()
Specification : 54.36.240
C
Estab
114) WASHER TO 6206509066
Description : WASHER TO 6206509066()
Specification : 172.81.018
C
Estab
115) WASHER TO 6206509069
Description : WASHER TO 6206509069()
Specification : 60.07.036
C
Estab
116) CLAMP TO 6206510068
Description : CLAMP TO 6206510068()
Specification : 175.82.104
C
Estab
117) PIPE TO 6206510169
Description : PIPE TO 6206510169()
Specification : IMSA-0045/A
C
Estab
118) PLUG TO 6206511130
Description : PLUG TO 6206511130()
Specification : 172.87.335
C
Estab
119) CLAMP TO 6206511148
Description : CLAMP TO 6206511148()
Specification : 175.83.057
C
Estab
120) NUT TO 6206511159
Description : NUT TO 6206511159()
Specification : 175.87.153
C
Estab
121) PIPE FROM VALVE TO THE METERING DEVICE TO 6206602007
Description : PIPE FROM VALVE TO THE METERING DEVICE TO 6206602007()
Specification : 175.85.002CB-1
C
Estab
122) HANDLE TO 6206602069
Description : HANDLE TO 6206602069()
Specification : 432.85.034-1
C
Estab
123) NOZZLE TO 6206603004
Description : NOZZLE TO 6206603004()
Specification : 172.86.041CB
C
Estab
124) BRACKET TO 6206603011
Description : BRACKET TO 6206603011()
Specification : 175.86.012CB
C
Estab
125) PIPE LINE TO 6206603014
Description : PIPE LINE TO 6206603014()
Specification : 175.86.020CB
C
Estab
Category : p
Grade : 2
Size :
S
1) Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) NUT TO 6206604240
Description : NUT TO 6206604240()
Specification : 172.87.354
C
Estab
2) SPECIAL PURPOSE SCREW TO 6206604890
Description : SPECIAL PURPOSE SCREW TO 6206604890()
Specification : EMT.10.022
C
Estab
3) CLAMP TO 6206605011
Description : CLAMP TO 6206605011()
Specification : 175.88.010
C
Estab
4) WRENCH ASSY TO 6206606001
Description : WRENCH ASSY TO 6206606001()
Specification : 172.90.005CBCB
C
Estab
5) SOCKET WRENCH S TO 6206606003
Description : SOCKET WRENCH S TO 6206606003()
Specification : 172.90.007CBCB
C
Estab
6) BOLT TO 6206607840
Description : BOLT TO 6206607840()
Specification : 172.91.329CBCB
C
Estab
7) ADAPTER TO 6206607876
Description : ADAPTER TO 6206607876()
Specification : 172.91.713
C
Estab
8) STRIP TO 6206608235
Description : STRIP TO 6206608235()
Specification : 175.93.060
C
Estab
9) ROD ASSY TO 6206609024
Description : ROD ASSY TO 6206609024()
Specification : 172.94.025CB
C
Estab
10) SPINDLE TO 6206609071
Description : SPINDLE TO 6206609071()
Specification : 172.94.036
C
Estab
11) SPINDLE TO 6206609082
Description : SPINDLE TO 6206609082()
Specification : 172.94.047
C
Estab
12) REAR WALL OF CHEST TO 6206609125
Description : REAR WALL OF CHEST TO 6206609125()
Specification : 155.32.019-1
C
Estab
13) AXLE TO 6206609127
Description : AXLE TO 6206609127()
Specification : 155.32.021
C
Estab
14) GASKET TO 6206609139
Description : GASKET TO 6206609139()
Specification : 155.32.034
C
Estab
15) GASKET TO 6206609140
Description : GASKET TO 6206609140()
Specification : 155.32.035
C
Estab
16) SCREW TO 6206609187
Description : SCREW TO 6206609187()
Specification : 155.32.148
C
Estab
17) BOSS TO 6206609198
Description : BOSS TO 6206609198()
Specification : 155.32.174
C
Estab
18) KEY TO 6206609201
Description : KEY TO 6206609201()
Specification : 155.32.209
C
Estab
19) SHIM TO 6206609207
Description : SHIM TO 6206609207()
Specification : 54.30.603
C
Estab
20) LOCKING RING TO 6206701045
Description : LOCKING RING TO 6206701045()
Specification : 434.03.143
C
Estab
21) CLAMP TO 6206701055
Description : CLAMP TO 6206701055()
Specification : 432.02.719
C
Estab
22) BUSH ASSY TO 6206702054
Description : BUSH ASSY TO 6206702054()
Specification : 172.91.051CB
C
Estab
23) SHIM TO 6206702272
Description : SHIM TO 6206702272()
Specification : 172.01.067
C
Estab
24) SHIM TO 6206702273
Description : SHIM TO 6206702273()
Specification : 172.01.068
C
Estab
25) SHIM TO 6206702274
Description : SHIM TO 6206702274()
Specification : 172.01.332
C
Estab
26) GASKET TO 6206801251
Description : GASKET TO 6206801251()
Specification : 172.18.240-01
C
Estab
27) TUBE TO 6206801257
Description : TUBE TO 6206801257()
Specification : 172.83.250
C
Estab
28) AXLE TO 6206801464
Description : AXLE TO 6206801464()
Specification : 175.01.480-1
C
Estab
29) SHIM TO 6206801467
Description : SHIM TO 6206801467()
Specification : 175.01.502
C
Estab
30) SHIM TO 6206801468
Description : SHIM TO 6206801468()
Specification : 175.01.502-01
C
Estab
31) BUTTON TO 6206801511
Description : BUTTON TO 6206801511()
Specification : 434.01.313
C
Estab
32) DOWEL TO 6206801699
Description : DOWEL TO 6206801699()
Specification : 172.01.740
C
Estab
33) PLUG TO 6206802047
Description : PLUG TO 6206802047()
Specification : 172.03.071
C
Estab
34) BUSHING TO 6206802112
Description : BUSHING TO 6206802112()
Specification : 434.03.241-1
C
Estab
35) TUBE TO 6206802119
Description : TUBE TO 6206802119()
Specification : 432.03.140
C
Estab
36) SCREW TO 6206802143
Description : SCREW TO 6206802143()
Specification : 60.03.008-1
C
Estab
37) ANGLE PIECE L H TO 6206803231
Description : ANGLE PIECE L H TO 6206803231()
Specification : 175.04.109-1
C
Estab
38) BOLT CLAMPING TO 6206803538
Description : BOLT CLAMPING TO 6206803538()
Specification : 54.04.197-03
C
Estab
39) PIPE TO 6206804081
Description : PIPE TO 6206804081()
Specification : 155.29.638CB-A
C
Estab
40) BOSS TO 6206804097
Description : BOSS TO 6206804097()
Specification : 172.04.120
C
Estab
41) BOSS TO 6206804104
Description : BOSS TO 6206804104()
Specification : 172.04.167
C
Estab
42) BOSS TO 6206804125
Description : BOSS TO 6206804125()
Specification : 172.04.341
C
Estab
43) BOSS TO 6206804139
Description : BOSS TO 6206804139()
Specification : 172.04.382
C
Estab
44) BOSS TO 6206804163
Description : BOSS TO 6206804163()
Specification : 172.04.616
C
Estab
45) BOSS TO 6206804329
Description : BOSS TO 6206804329()
Specification : 175.87.038
C
Estab
46) BOSS TO 6206804336
Description : BOSS TO 6206804336()
Specification : 434.04.162
C
Estab
47) STRIP TO 6206804398
Description : STRIP TO 6206804398()
Specification : 155.29.2391
C
Estab
48) STOPPER TO 6206804583
Description : STOPPER TO 6206804583()
Specification : 172.04.779
C
Estab
49) BRACKET TO 6206804594
Description : BRACKET TO 6206804594()
Specification : 172.04.042-1
C
Estab
50) BOSS TO 6206804611
Description : BOSS TO 6206804611()
Specification : 172.04.753
C
Estab
51) PIPE UNION TO 6206804620
Description : PIPE UNION TO 6206804620()
Specification : 172.04.756
C
Estab
52) BOSS TO 6206804622
Description : BOSS TO 6206804622()
Specification : 172.04.848
C
Estab
53) LH GUARD TO 6206807086
Description : LH GUARD TO 6206807086()
Specification : 172.10.161
C
Estab
54) PIPE UNION TO 6206807207
Description : PIPE UNION TO 6206807207()
Specification : 166.30.063
C
Estab
55) STRAP TO 6206809042
Description : STRAP TO 6206809042()
Specification : 172.20.057
C
Estab
56) PLUG TO 6206809049
Description : PLUG TO 6206809049()
Specification : 172.20.077
C
Estab
57) GASKET TO 6206809080
Description : GASKET TO 6206809080()
Specification : 432.20.183
C
Estab
58) COVER PLATE TO 6206831426
Description : COVER PLATE TO 6206831426()
Specification : 175.01.331-1
C
Estab
59) BUSHING TO 6206851043
Description : BUSHING TO 6206851043()
Specification : 172.25.098
C
Estab
60) SHIM TO 6206851050
Description : SHIM TO 6206851050()
Specification : 172.25.103
C
Estab
61) AXLE TO 6206861021
Description : AXLE TO 6206861021()
Specification : 172.52.017
C
Estab
62) AXLE TO 6206861038
Description : AXLE TO 6206861038()
Specification : 172.52.121
C
Estab
63) PLUNGER TO 6206861060
Description : PLUNGER TO 6206861060()
Specification : 172.52.144
C
Estab
64) TUBE TO 6206901494
Description : TUBE TO 6206901494()
Specification : 175.33.635
C
Estab
65) BRACKET TO 6206902274
Description : BRACKET TO 6206902274()
Specification : 172.70.415-1
C
Estab
66) WASHER TO 6207213293
Description : WASHER TO 6207213293()
Specification : 155.38.348-A
C
Estab
67) BOLT TO 6207304009
Description : BOLT TO 6207304009()
Specification : X1-10013
C
Estab
68) WASHER TO 6207305641
Description : WASHER TO 6207305641()
Specification : 54.02.404-1
C
Estab
69) PISTON TO 6207501249
Description : PISTON TO 6207501249()
Specification : B11-5-2C1.022
C
Estab
70) LOCK WASHER TO 6207902038
Description : LOCK WASHER TO 6207902038()
Specification : G 10.00.18
C
Estab
71) BUSH TAPER TO 6207902084
Description : BUSH TAPER TO 6207902084()
Specification : X9.10273M
C
Estab
72) BUSH TAPER TO 6207902085
Description : BUSH TAPER TO 6207902085()
Specification : X9.10272M
C
Estab
73) ASSY PIPE TO 6209801208
Description : ASSY PIPE TO 6209801208()
Specification : PV572.0711.0068
C
Estab
74) BOSS TO 6209801213
Description : BOSS TO 6209801213()
Specification : PV572.0734.3010
C
Estab
75) STUD TO 6209801366
Description : STUD TO 6209801366()
Specification : PV572.0765.3003
C
Estab
76) ASSY ADAPTOR TO 6209801429
Description : ASSY ADAPTOR TO 6209801429()
Specification : PV572.0718.0131
C
Estab
77) BOSS TO 6209801508
Description : BOSS TO 6209801508()
Specification : PV572.0764.3002
C
Estab
78) DIP STICK SHORT TO 6209890012
Description : DIP STICK SHORT TO 6209890012()
Specification : PV572.0734.3020
C
Estab
79) BOLT TO 7000012055
Description : BOLT TO 7000012055()
THE KAKA INDIAN FOUNDRY
NO.729, SIVAKASI TO VIRUDHUNAGAR MAIN ROAD, THIRUTHANGAL TAMIL NADU
PIN1 : 626130
Phone No. : 04562 - 230036, 9790027039 GSTIN : 33AABFT6777G1ZZ
