71) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.[04]()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Nonestab
72) SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION.[70]()
Specification : SEAR DS CAT NO.1005-000617 DC NO. 26754-SA DT- 21.04.15 IN SOFT CONDITION.
C
Nonestab
Category : DDP,DP
Grade : I
Size :
1Small Arms Factory
Name
Specification
Use
Status
1) BRACKET FOR INSAS 5.56 MM()
AS PER DRAWING
C
Not Estab.
2) TRIGGER FOR INSAS 5.56 MM()
AS PER DRAWING
C
Not Estab.
3) BARREL EXTENSION BLANK STAGE-V FOR SMALL ARMS()
AS PER DRAWING
C
Not Estab.
4) HAMMER FOR RIFLE 5.56 MM()
AS PER DRAWING
C
Not Estab.
5) Guide assy. -2 Drg no. AKC-09/2*()
AS PER DRG.
C
Non Established
6) Picatiny Rail Drg no. AKC-08/1/2*()
AS PER DRG.
C
Non Established
7) Channel left Drg no. AKC-03/6BL()
AS PER DRG.
C
Non Established
8) Band Front Sight To DS CAT NO. 5340-016724()
AS PER DRG.
C
Non Established
9) Receiver plate left & right Drg no. 1005-007721&10057720()
AS PER DRG.
C
Non Established
Category : DDP,DP
Grade : I
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
2) PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR[70]()
Specification : PRE MACHINED BLANK FS FOR GAS PORT BLOCK WITH FIRMS MATERIAL TO DRG NO TEND 2611 STAR4 FOR TAR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PISTON EXTENSION BLANK Drg. No AKC-07/01
Description : PISTON EXTENSION BLANK Drg. No AKC-07/01()
Specification : AS PER DRG
C
Estab
2) STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.
Description : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*.()
Specification : STEEL BLANK FOR PISTON EXTENSION STAGE VI(SIXTH) TO DRG NO-SK-5143*. NOTE:RAW MATERIAL WILL BE SUPPLIED BY SAF ON FREIGHT TO PAY BASIS AGAINST THE B/G THROUGH L/FOLIO NO.0412001042.
C
Estab
3) Sear auto carbine Drg. No. AKC-O1/11
Description : Sear auto carbine Drg. No. AKC-O1/11()
Specification : AS PER DRG.
C
Estab
4) FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.
Description : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.()
Specification : FORE SIGHT HOUSING TO DS CAT NO. 1005-000426 DC(I) NO. 26593-SA DT- 20.07.11 IN WITH OUT HEAT TREATMENT CONDITION.
6) Extractor DSCAT No. 1005-006633 for MAG 7.62MM through MIM process
Description : Extractor DSCAT No. 1005-006633 for MAG 7.62MM through MIM process()
Specification : As Per Drg.
C
Estab
7) SEATING CRADLE PIVOT ASSY FOR MAG
Description : SEATING CRADLE PIVOT ASSY FOR MAG()
1) FRONT HOOK TO DRAWING NO 172 01 456 3 LF 6101006055[61]()
Specification : SERVICE ASSISTANCE
C
Nonestab
2) COVER TO DRG NO 175 03 006 1A LF 6106802068[61]()
Specification : SERVICE ASSISTANCE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) ROLLER SUPPORT TO 6206203018[62]()
Specification : ROLLER SUPPORT TO DRG NO. 175.18.005CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHAFT TO 6206102096[62]()
Specification : SHAFT TO DRG NO. 166.29.305CB
C
Nonestab
2) FRAME ASSY TO 6206207012[62]()
Specification : FRAME ASSY TO DRG NO. 172.22.011CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD HINGED FRONT LEFT HAND TO 6206803352[62]()
Specification : SHIELD HINGED FRONT LEFT HAND TO DRG NO.184.04.029CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) SHIELD REAR LEFT HAND TO 6206803050[62]()
Specification : SHIELD REAR LEFT HAND TO DRG NO.172.04.198CB
C
Nonestab
2) SHIELD REAR RIGHT HAND TO 6206803052[62]()
Specification : SHIELD REAR RIGHT HAND TO DRG NO.172.04.200CBCB
C
Nonestab
3) SHIELD HINGED FRONT RIGHT HAND TO 6206803351[62]()
Specification : SHIELD HINGED FRONT RIGHT HAND TO DRG NO. 184.04.028CB-1CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET CELL LIFTING TO 6206890004[62]()
Specification : BRACKET CELL LIFTING TO DRG NO. 175.28.002CB-2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : II
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) LOUVER LH TO 6209801477[62]()
Specification : PV572.0718.2363
C
Nonestab
2) LOUVER RH TO 6209801480[62]()
Specification : PV572.0718.2362
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) LH LEVER ASSY TO 6206403001[62]()
Specification : LH LEVER ASSY TO DRG NO. 172.42.003CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEVER ASSY TO 6201095016[62]()
Specification : LEVER ASSY TO DRG NO. 188.95.010CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) RWA BRACKETS (07 TYPES) ()
SERVICE ASSISTANCE
C
Not Established
2) MACHINING ASSISTANCE FOR SMALL, MEDIUM & LARGE COMPONENTS()
AS PER DRG
C
Non Established
Category : P
Grade : II
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF CENTRAL SPIDER SPROCKET DRG NO 9 A 621 00 001 FROM RAW MATERIAL[91]()
Specification : FABRICATION OF CENTRAL SPIDER/SPROCKET DRG NO. 9-A-621.00.001 FROM RAW MATERIAL CENTRAL SPIDER/SPROCKET DRG. NO. M-11467 MACHINING AFTER HEAT TREATMENT AS PER PROCESS SCHEDULE
R
Nonestab
2) SEMI STAGE MACHINING OF CENTRAL SPIDER SPROCKET TO DRG NO M 11441 FROM INPUT MATERIAL[91]()
Specification : SEMI STAGE MACHINING OF CENTRAL SPIDER/SPROCKET TO DRG NO M-11441 FROM INPUT MATERIAL I/CODE NO. 0372150165 (MACHINING AS PER PROCESS SCHEDULE)
P
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) LEFT HAND SUCTION PUMP COVER TO 6206407098[62]()
Specification : LEFT HAND SUCTION PUMP COVER TO DRG NO. 172.46.009CB-2CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019
Description : FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019()
Specification : FABRICATION OF PINION SHAFT TO DRG. No. AO-18.03.019
C
Estab
2) FABRICATION OF PINION TO DRG NO AO 18 03 025
Description : FABRICATION OF PINION TO DRG NO AO 18 03 025()
Specification : FABRICATION OF PINION TO DRG. No. AO-18.03.025
C
Estab
Category : p
Grade : 3
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981[91]()
Specification : COMPLETE MACHINING OF BREECH PIECE (AO-18.01.001), FROM INPUT MATERIAL I/C:- 7230971001 TO BE SUPPLIED BY GSF (I/C-9140033981)
C
Nonestab
2) SHUTTER BUSH AO 18 01 029 IN FINISHED CONDITION IC 7200200298[72]()
Specification : SHUTTER BUSH (AO-18.01.029) IN FINISHED CONDITION (I/C-7200200298)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FENCE TO 6206109006[62]()
Specification : FENCE TO DRG NO. 172.11.026CB-1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) BODY ASSY TO 6206861005[62]()
Specification : BODY ASSY TO DRG NO. 172.52.046CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) PIPE LINE TO 6201066098[62]()
Specification : PIPE LINE TO DRG NO. CQA(HV)5.66.066
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL[70]()
Specification : BARREL BLANK AS PER OFT DRG NO TEND 2689 FROM OFT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacturing and supply of barrel blank after honing stage[70]()
Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) CLUTCH SHAFT ASSY TO 6201063014[62]()
Specification : CLUTCH SHAFT ASSY TO DRG NO. 188.63.012CBCB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL[91]()
Specification : FABRICATION OF DRUM/BARREL TO DRG NO 9-A-621.06.035 FROM GSF SUPPLIED MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) HEAD AUTOMATIC COCKING RAMMER ASSY TO DRG NO 2007475 IN FC[71]()
Specification : HEAD AUTOMATIC COCKING RAMMER ASSY. TO DRG NO. 2007475 IN F/C
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) BRACKET ASSY TO 6201015010[62]()
Specification : BRACKET ASSY TO DRG NO. 188.15.018CB-3CB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) FILLER CAP 011[62]()
Specification : FILLER CAP 172.41.011
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
2) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270[91]()
Specification : Fabrication of Back Plate to Drg No 9A 621 06 019 from Back Plate Forging to Drg No F 2270
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9081008458 MACHINING OF END COVER TO DRAWING NO 4071725 MATERIAL WILL BE SUPPLIED BY GCF[90]()
Specification : MACHINING OF END COVER TO DRAWING NO.4071725. (MATERIAL WILL BE SUPPLIED BY GCF).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9070056720 PART M A OF RB TO DRG GCF 20A SK874[90]()
Specification : 9070056720 PART M A OF RB TO DRG GCF 20A SK874
E
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Heavy Vehicle Factory
[ENR Registration]
Name
Specification
Use
Status
1) PLATE TOP TO 6106801853
Description : PLATE TOP TO 6106801853()
Specification : V572.0175.8000
C
Estab
2) PLATE BOTTOM TO 6106807332
Description : PLATE BOTTOM TO 6106807332()
Specification : V572.0175.8025
C
Estab
3) ECCENTRIC TO 6201017011
Description : ECCENTRIC TO 6201017011()
Specification : 188.17.006-1
C
Estab
4) LEVER ASSY TO 6206419050
Description : LEVER ASSY TO 6206419050()
Specification : 175.63.047CB
C
Estab
Category : p
Grade : 2
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BREECH RING AS PER DRG NO 1002378 FOR BREECH MECH ASSY FOR 40 MM L70 GUN[90]()
Specification : FABRICATION OF BREECH RING AS PER DRG. NO. 1002378 FOR BREECH MECH. ASSY. FOR 40 MM L-70 GUN
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF CASING DRG NO AO 18 02 001[91]()
Specification : FABRICATION OF CASING DRG NO. AO-18.02.001 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BODY ICR 1325[00]()
Specification : CONVERSION OF BODY TO D.S.CAT. NO. 1005-001514 (I) DC NO. 26759-SA DT.29.05.2015 - SHEET-I, (II) DC NO. 26766-SA DT. 02.07.2015 SHEET-II, FROM FORGING DRG. NO. RFI/SK/725/1 L. (ICR 1325)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) CENTRAL SPIDER 9 A 621 00 001 IN FINISHED CONDITION[72]()
6) RING I.R.BUNG AS PER DRG.NO.MS.SK 11098/1 DATED 10.2.54 SPECIFICATION :-MD.I,MATL SPEC:K409 QUALB-FOR PRIMER D.C. MK.VIII.[20]()
Specification : MATL SPEC:K409 QUALB-FOR PRIMER D.C. MK.VIII.
C
Nonestab
7) RUBBER RING TO DRG NO ARDE/2165 DETAIL 5 DT.28-9-92, SPECN. ARDE/SPECN/423[60]()
Specification : ARDE/SPECN/423
C
Nonestab
8) SEALING RING TO DRG. NO. ARDE/1508 DET 7 DT 3-11-77. SPECN. ARDE/SPECN/221[60]()
Specification : ARDE/SPECN/221
C
Nonestab
9) RUBBER RING DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015[60]()
Specification : DRG.NO. NAI (P) SK 8501 (Prov ) DT. 24.02.2015
R
Nonestab
10) SHEET RUBBER EXPANDED TO SPECN. IND/ME/645 (b): 2014 DC:5282 -ME TYPE B SIZE 914.4 MM WIDE X 8 MM THICK[10]()
Specification : IND/ME/645
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 'O' RING 78X2 (2013436144)[20]()
Specification : 'O' RING 78X2 (2013436144)
E
Nonestab
Category : ddp
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PROTECTIVE RING FOR COPPER BAND TO DRG. NO. SK-8337/A()
Specification : PROTECTIVE RING FOR COPPER BAND TO DRG. NO. SK-8337/A required for Mfr. of 105mm IFG Colour Smoke BE 3A, 105mm IFG SMK BE 3A(E) and 105mm IFG HE.
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM()
Specification : PROTECTIVE RING AS PER OFC DRG. NO. SK-8237 FOR 155MM
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B
Description : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B()
Specification : O RING 3 point 4 X 1 point 9 TO OFAJ DRG NO FS 2774 B
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) O RING 66 POINT 7 BY 1 POINT 2 TO OFAJ DRG NO FS2773B
Description : O RING 66 POINT 7 BY 1 POINT 2 TO OFAJ DRG NO FS2773B()
Specification : O RING 66.7 X 1.2 TO OFAJ DRG.NO.FS-2773B
C
Estab
Category : ddp
Grade : 1
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) O RING-1 TO DRG NO. AFK/SK-611-09 FOR 40 MM MGL AMMN.[00]()
Specification : O RING-1
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.[00]()
Specification : PROTECTOR FOR COPPER BAND AS PER OFAJ DRG. NO. SM-894 A.
R
Estab
Category : ddp
Grade : Grade III
Size :
S
1Ordnance Factory Ambajhari
Name
Specification
Use
Status
1) O RING-1 TO DRG NO. AFK/SK-611-09 FOR 40 MM MGL AMMN.[00]()
Specification : O RING-1
C
Estab
Category : ddp
Grade : Grade III
Size :
S
1324
MICROFINE BUSHINGS PRIVATE LTD
107, SIDCO INDUSTRIAL ESTATE 2ND LANE, PATTARAVAKKAM RLY STN RD CHENNAI Tamil Nadu
PIN1 : 600098
Phone No. : 26250432 GSTIN :
33AACCM1179M1ZC
4) BODY COVER WITH INTEGRAL PICATINY RAIL FOR LMG BELT FED[70]()
Specification : BODY COVER WITH INTEGRAL PICATINY RAIL LMG 7.62MM BELT FED AS PER DRG. NO. ARDE/SK/108/005
C
Nonestab
5) MACHINING OF HOUSING MODIFIED FOR STRIKER MECHANISM[70]()
Specification : MACHINING OF HOUSING MODIFIED DRG.NO.NAD 7606/6 TO FINISHED HOUSING MODIFIED AS PER DRAWING.DIE CASTING HOUSING MODIFIED WILL BE ISSUED AGAINST BANK GAURANTEE FORM LF NO.0841271004
C
Nonestab
6) BIPOD ASSY OF LMG BELT FED[70]()
Specification : BIPOD ASSY OF LMG 7.62MM BELT FED as per drawing No.
1804 01 08 00 00 000 00DA
C
Nonestab
7) Pin Recoil Plate For Revolver Side Swing[70]()
Specification : Pin Recoil Plate For Revolver 0.32 Side Swing DRG. NO. RV-03/7 SW.
C
Nonestab
8) Lower Body For CQB 5 56 x 45 MM for CQB DRG No 1901 01 01 11 16 001 00DA[70]()
Specification : Lower Body For CQB 5.56x45 MM for CQB DRG. No. 1901 01 01 11 16 001 00DA.
C
Nonestab
9) Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA[70]()
Specification : Mounting Rail for CQB 5 56x45 MM for CQB DRG No 1901 01 01 08 15 001 00DA
C
Nonestab
10) Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA[70]()
Specification : Body Upper for CQB 5 56x45 MM for CQB DRG No 1901 01 01 15 18 001 00DA
C
Nonestab
11) CLOSING CUP DRG NO 0204 03 04 00 03 001 00DA[70]()
12) BODY HOUSING LOWER and TRIGGER MECHANISM ASSEMBLY FORJVPC[70]()
Specification : BODY HOUSING LOWER & TRIGGER MECHANISM ASSEMBLY FOR JVPC 5.56X30MM DRG NO. 0204-03-04-02-14-000-00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) LAUNCHER SHAFT[70]()
Specification : LAUNCHER SHAFT TO DRG. NO. 30P 1105 EXPL FOR HOUSING LAUNCHER ASSY OF MGL WITH FIRM'S MATERIAL
C
Nonestab
2) SEAR 14 5MM AND 20MM DRG NO 44P06009[70]()
Specification : AS PER OFB REQUIREMENTS
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]()
Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7
C
Nonestab
2) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Machining of CAP of 9MM Carbine in finished condition[70]()
Specification : Machining of CAP of 9MM Carbine in finished condition DS CAT No. 1005-000860 from I.C. Cap (Material will be supplied by SAF against B.G.)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) MTG TRIPOD 7.62MM MGL 4A1[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) FRAME TRIGGER DS CAT NO. 1005-006602[70]()
Specification : AS PER DRG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) MOUNTING RAIL for JVPC[70]()
Specification : MOUNTING RAIL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Barrel Cover Assembly for JVPC Consisting of Barrel Cover Moulding and Bush Barrel Cover[70]()
Specification : Barrel Cover Assembly for JVPC 5.56 X 30MM DRG. No. 0204-03-03-01-12-000-00DB Consisting of Barrel Cover Moulding & Bush Barrel Cover
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Body Upper Feed Mechanism Slide 1005-006823[70]()
Specification : As Per Drg.DS CAT 1005-006823 DC (I) 27019-SA DTD 28.01.17 IN FINISHED CONDITION WITHOUT H.T. and Plating
1) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION[72]()
Specification : MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TODS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007IN FINISHED CONDITION
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Body Housing Upper Welding for JVPC[70]()
Specification : Body Housing Upper Welding for JVPC 5.56 X 30 MM DRG No. SK-5729* Consisting of Body Housing Upper, Channel Left, Channel Right, Tube Spacer, Bracket Front and Bracket Rear, Body Housing Upper
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas to Drg. No. SKM-889*
C
Nonestab
2) TRIGGER MECHANISM ASSEMBLY FOR LMG[70]()
Specification : TRIGGER MECHANISM ASSEMBLY FOR LMG 7.62 MM BELT FED DRG. NO. 1804 01 01 02 00 000 00DA.
C
Nonestab
3) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BRACKET DRG NO 9 A 621 02 002[91]()
Specification : FABRICATION OF BRACKET DRG. NO. 9-A-621.02.002 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
2) FABRICATION OF CASING DRG NO AO 18 02 001[91]()
Specification : FABRICATION OF CASING DRG NO. AO-18.02.001 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
3) Complete machining of remover 9 A 62109 001 from input material IC 7299000234 to be supplied by GSF IC 9140701109[91]()
Specification : Complete machining of remover (9-A-621.09.001) from input material I/C- 7299000234 to be supplied by GSF (I/C-9140701109)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 33P 3011 FULLY FINISHED WITH FIRM MATERIAL REQUIRED FOR 38MM MSL
C
Nonestab
2) REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL[70]()
Specification : REAR CROSS TO DRAWING NUMBER 30P 3011 STAR REQUIRED FOR 40MM MGL
C
Nonestab
3) SPADE GRIP ASSEMBLY WITH SAFETY[74]()
Specification : SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN
E
Nonestab
4) BOLT ASSEMBLY[74]()
Specification : BOLT ASSEMBLY, BREECH OOW50BMG AS PER DRG NO: 6528322 OF M2HB GUN
E
Nonestab
5) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
6) Buffer Recoil Assembly[74]()
Specification : BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN
E
Nonestab
7) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
8) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
9) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MSL HOUSING LAUNCHER[70]()
Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SHAFT MOTOR[74]()
Specification : SHAFT MOTOR Drg.No. 074305A-00
C
Nonestab
2) CASING MOTOR[74]()
Specification : CASING,MOTOR Drg.No. 074257B-02
C
Nonestab
3) TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025[70]()
Specification : TOOL FOR ADJUSTING FRONT SIGHT AS PER DRG No TAR K 9025
C
Nonestab
4) SPADE GRIP ASSEMBLY WITH SAFETY[74]()
Specification : SPADE GRIP ASSEMBLY WITH SAFETY, OOW50BMG AS PER DRAWING NO: 6535477-S OF M2HB GUN
E
Nonestab
5) SHAFT SPLINE ELEVATION[74]()
Specification : SHAFT SPLINE, ELEVATION AS PER DRG 062815A-00 FOR ELEVATION ASSY OF SRCG.
C
Nonestab
6) SHAFT ELEVATION[74]()
Specification : SHAFT ELEVATION AS PER DRG 062817A-01 FOR ELEVATION ASSY OF SRCG.
R
Nonestab
7) ADAPTOR MAGAZINE[74]()
Specification : ADAPTOR MAGAZINE(VIEW)Y25683A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
8) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) MAGAZINE BOX ASSY[74]()
Specification : MAGAZINE BOX ASSY AS PER DRG.Y25676A-00 FOR MAGAZINE ASSY OF SRCG
C
Nonestab
10) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
11) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Barrel Extension Assembly[74]()
Specification : Barrel Extension Assembly, HB, OOW50BMG AS PER DRG NO: 5504082 OF M2HB GUN
E
Nonestab
2) Buffer Recoil Assembly[74]()
Specification : BUFFER RECOIL MECHANISM OOW50BMG AS PER DRG NO: 7266821 OF M2HB GUN
E
Nonestab
3) COVER ASSEMBLY[74]()
Specification : COVER ASSEMBLY, OOW50BMG AS PER DRG NO: 6528309 OF M2HB GUN
E
Nonestab
4) SLIDE ASSEMBLY RETRACTING[74]()
Specification : SLIDE ASSEMBLY RETRACTING, OOW50BMG AS PER DRG NO: 11010439 OF M2HB GUN
E
Nonestab
5) COVER BLIND FRONT FINISH[74]()
Specification : COVER BLIND FRONT FINISH (View)Y25689A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
6) BOLT CENTERING[74]()
Specification : BOLT, CENTERING (View)020054A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
7) COVER BLIND BEARING[74]()
Specification : COVER BLIND BEARING/Y25638A-00 AS PER ELEVATION ASSY OF SRCG
C
Nonestab
8) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
9) INSERT M4 ALTERED ITEM[74]()
Specification : INSERT M4, ALTERED ITEM (View)AS PER DRG 031682A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
10) BOLT GEAR TRAVERSE[74]()
Specification : BOLT GEAR, TRAVERSE (View)AS PER DRG 031669A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
11) BELLEVILLE LEVER TRAVERSE[74]()
Specification : BELLEVILLE, LEVER TRAVERSE (View)AS PER DRG 062346A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
12) BASE STOP B[74]()
Specification : BASE STOP B (View)AS PER DRG 019895A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
13) SCREW SPRING INTERFACE[74]()
Specification : SCREW, SPRING INTERFACE AS PER DRG 065038A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
14) Rear Sight Assembly OOW50BMG as per Drawing No 12003047 of M2HB GUN[74]()
Specification : Rear Sight Assembly, OOW50BMG as per Drawing No.: 12003047 of M2HB GUN
C
Nonestab
15) REAR BLOCK AS PER DRG KC3 1202 WITH FIRMS MATERIAL FOR TRICA[70]()
Specification : REAR BLOCK AS PER DRG KC3-1202 WITH FIRM'S MATERIAL FOR TRICA
C
Nonestab
16) MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF COVER RECEIVER AS PER DRG NO KC3 1025 STAR FOR TRICA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) SLIDE TO DRG NO CTM 166[70]()
Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C
C
Nonestab
2) RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A[70]()
Specification : RECEIVER IN FC FOR ASHANI MK III AS PER DRG NO CTM 157 A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981()
Specification : COMPLETE MACHINING OF BREECH PIECE AO 18 01 001 FROM INPUT MATERIAL IC 7230971001 TO BE SUPPLIED BY GSF IC 9140033981
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) KEY[74]()
Specification : KEY (View) AS PER DRG NO.074264A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) COVER SOLENOID 1[74]()
Specification : COVER SOLENOID 1 (VIEW) AS PER DRG NO.065281A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
3) SCREW HEAD COCKING[74]()
Specification : SCREW HEAD COCKING AS PER DRG NO.066628A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
4) GUIDE RECOIL REAR[74]()
Specification : GUIDE RECOIL, REAR AS PER DRG NO.063796A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
5) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
6) COVER SOLENOID 2[74]()
Specification : COVER SOLENOID 2 AS PER DRG NO.065283A-00 FOR SOLENOI SHOT ASSY OF SRCG
C
Nonestab
7) KEY AS PER DRG NO 074811A 00[74]()
Specification : KEY (View) AS PER DRG NO.074811A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
8) COVER FRONT PEDESTAL[74]()
Specification : COVER FRONT PEDESTAL AS PER.Y25684A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
9) ARM COVER LEFT[74]()
Specification : ARM COVER LEFT (View) AS PER.Y25685A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
10) ARM COVER RIGHT[74]()
Specification : ARM COVER RIGHT (View) AS PER.DGRNO.Y25686A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
11) BRACKET TOP COVER[74]()
Specification : BRACKET TOP COVER (View) AS PER.DRG.NO.Y25687A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
12) BRACKET BASKET RIGHT WELD[74]()
Specification : BRACKET, BASKET,RIGHT, WELD/Y19378A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
13) BRACKET BASKET LEFT WELD[74]()
Specification : BRACKET, BASKET, LEFT, WELD/Y19376A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
14) CASE DESICCANT[74]()
Specification : CASE, DESICCANT/Y17736A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]()
Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl RH OOW50BMG as per Drg No 6128730 of M2HB Gun
C
Nonestab
2) Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun[74]()
Specification : Cam Extractor Cover OOW50BMG as per Drg No 5564279 of M2HB Gun
C
Nonestab
3) Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun[74]()
Specification : Bracket Bolt Latch OOW50BMG as per Drg No 5504061 of M2HB Gun
C
Nonestab
4) Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun[74]()
Specification : Arm Belt Feed Pawl OOW50BMG as per Drg No 6008914 of M2HB Gun
C
Nonestab
5) Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun[74]()
Specification : Extractor OOW50BMG as per Drg No 5504065 of M2HB Gun
C
Nonestab
6) Slide Sear OOW50BMG as per Drg No 5351220 of M2HB Gun[74]()
Specification : Slide Sear OOW50BMG as per Drg No 5351220 of M2HB Gun
C
Nonestab
7) Sear OOW50BMG as per Drg No 5504067 of M2HB Gun[74]()
Specification : Sear OOW50BMG as per Drg No 5504067 of M2HB Gun
C
Nonestab
8) Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun[74]()
Specification : Ejector Small Arms Cartridge LH OOW50BMG as per Drg No 6009732 of M2HB Gun
C
Nonestab
9) Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun[74]()
Specification : Lever Cocking OOW50BMG as per Drg No 6009718 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA[70]()
Specification : MANUFACTURE AND SUPPLY OF DRUM BACK SIGHT AS PER DRG NO KC3 2021 FOR TRICA
C
Nonestab
2) BOLT HOUSING[74]()
Specification : BOLT HOUSING (View)DRG NO.064405A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
3) SHAFT ENCODER CASING[74]()
Specification : SHAFT ENCODER CASING (View) DRG NO.Y25639A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
4) BUMPER ARM[74]()
Specification : BUMPER ARM (View) DRG NO.062358A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
5) BUMPER ARM LOCK[74]()
Specification : BUMPER ARM LOCK (View) DRG NO.064410A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
6) BLOCKING ELEMENT[74]()
Specification : BLOCKING ELEMENT (View) DRG NO.064413A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
7) BRACKET ASSY 1[74]()
Specification : BRACKET ASSY 1(VIEW) DRG NO.064391A FOR TRAVERSE ASSY OF SRCG
C
Nonestab
8) SECTOR BACK COVER FNSH[74]()
Specification : SECTOR BACK COVER FNSH (View) DRG NO.Y25645A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
9) SECTOR FRONT COVER FNSH[74]()
Specification : SECTOR FRONT COVER FNSH(View) DRG NO.Y25646A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
10) ADAPTOR SPRING[74]()
Specification : ADAPTOR, SPRING (View) DRG NO.069201A FOR PEDESTAL ASSY OF SRCG
C
Nonestab
11) LIMITER EXTERNAL[74]()
Specification : LIMITER EXTERNAL (View) DRG NO.075150A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
12) WASHER FLAT CRES M5 A4[74]()
Specification : WASHER FLAT CRES M5 A4 ALT, DRG NO.Y25690A-00 FOR MECH STRU ASSY OF SRCG
C
Nonestab
13) SUPPORT ELEVATION DRIVE[74]()
Specification : SUPPORT, ELEVATION DRIVE, DRG NO.062818A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
14) BOLT GEAR ELEVATION[74]()
Specification : BOLT GEAR, ELEVATION (View) DRG NO.031673A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
15) BRACKET ASSY2[74]()
Specification : BRACKET ASSY2(VIEW) DRG NO.064595A-01 FOR ELEVATION ASSY OF SRCG
C
Nonestab
16) SPACER OIL RETAINER[74]()
Specification : SPACER, OIL RETAINER/ DRG NO.066866A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
17) SUPPORT GEAR TRAVERSE[74]()
Specification : SUPPORT GEAR TRAVERSE (View) DRG NO.064406A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
18) ANGLE LIMITER RIGHT[74]()
Specification : ANGLE LIMITER, RIGHT (View) DRG NO.062361A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
19) ANGLE LIMITER LEFT[74]()
Specification : ANGLE LIMITER, LEFT (View) DRG NO.062362A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
20) BASE STOP A[74]()
Specification : BASE STOP A (View) DRG NO.019894A-00 FOR TRAVERSE ASSY OF SRCG
C
Nonestab
21) COVER SHAFT ENCODER[74]()
Specification : COVER SHAFT ENCODER/ DRG NO.Y25635A-00 FOR PEDESTAL ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HOUSING STOPPER LEFT SIDE[74]()
Specification : HOUSING, STOPPER, LEFT SIDE AS PER DRG Y18693A-00 FOR ELEVATION ASSY OF SRCG
C
Nonestab
2) PISTON INNER[74]()
Specification : PISTON INNER (View) AS PER DRG NO.074263A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
3) COVER MOTOR[74]()
Specification : COVER, MOTOR AS PER DRG NO.Y18725A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
4) SPACER ROTOR[74]()
Specification : SPACER ROTOR (View) AS PER DRG NO.074312A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
5) STOPPER[74]()
Specification : STOPPER (View) AS PER DRG NO.074266A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
6) NUT[74]()
Specification : NUT (View) AS PER DRG NO.074267A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
7) WASHER SAFETY[74]()
Specification : WASHER SAFETY (View) AS PER DRG NO.074265A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
8) NUT SOLENOID[74]()
Specification : NUT SOLENOID AS PER DRG NO.065454A-00 FOR SOLENOID SHOT ASSY OF SRCG
C
Nonestab
9) Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun[74]()
Specification : Shank Barrel Extension LH OOW50BMG as per Drg No 6009728 of M2HB Gun
C
Nonestab
10) Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun[74]()
Specification : Slide Retracting OOW50BMG as per Drg No 6147893 of M2HB Gun
C
Nonestab
11) Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun[74]()
Specification : Latch Back Plate OOW50BMG as per Drg No 6008949 of M2HB Gun
C
Nonestab
12) Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun[74]()
Specification : Pawl Aligning Cartridge OOW50BMG as per Drg No 6008975 of M2HB Gun
C
Nonestab
13) Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun[74]()
Specification : Bracket Cover OOW50BMG as per Drg No 5152752 of M2HB Gun
C
Nonestab
14) Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun[74]()
Specification : Latch Cover OOW50BMG as per Drg No 6008928 of M2HB Gun
C
Nonestab
15) Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun[74]()
Specification : Back Plate Latch OOW50BMG as per Drg No 11010453 of M2HB Gun
C
Nonestab
16) Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun[74]()
Specification : Plate Buffer OOW50BMG as per Drg No 5152869 of M2HB Gun
C
Nonestab
17) Screw OOW50BMG as per Drg No 13018132 of M2HB Gun[74]()
Specification : Screw OOW50BMG as per Drg No 13018132 of M2HB Gun
C
Nonestab
18) Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun[74]()
Specification : Switch Bolt OOW50BMG as per Drg No 5504062 of M2HB Gun
C
Nonestab
19) Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun[74]()
Specification : Bracket Belt Holding Pawl LH OOW50BMG as per Drg No 5504059 of M2HB Gun
C
Nonestab
20) Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun[74]()
Specification : Cam Extractor OOW50BMG as per Drg No 5009373 of M2HB Gun
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) WASHER ELASTOMER[74]()
Specification : WASHER ELASTOMER (View) AS PER DRG NO.Y01876A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) HOUSING CONNECTOR[74]()
Specification : HOUSING CONNECTOR(VIEW) AS PER DRG NO.074253A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
3) CAP ASSY[74]()
Specification : CAP ASSY (VIEW) AS PER DRG NO.Y18784A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
4) SPINDLE ALTERED[74]()
Specification : SPINDLE, ALTERED (View) AS PER DRG NO.074260A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
5) SCREW M10[74]()
Specification : SCREW M10 (View) AS PER DRG NO.075871A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
6) BRACKET[74]()
Specification : BRACKET AS PER DRG NO.Y17473A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
7) SCREW SHANK[74]()
Specification : SCREW SHANK, AS PER DRG NO.Y00964A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
8) BUSHING GUIDE FRONT[74]()
Specification : BUSHING GUIDE, FRONT AS PER DRG NO.063911A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
9) BUSHING THREAD REAR[74]()
Specification : BUSHING THREAD REAR 1 (View) AS PER DRG NO.077853A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
10) BASE LIMITER[74]()
Specification : BASE LIMITER AS PER DRG NO.Y17478A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
11) ROD LIMITER[74]()
Specification : ROD LIMITER (View) AS PER DRG NO.066426A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
12) PLUG SPRING[74]()
Specification : PLUG SPRING (View) AS PER DRG NO.066428A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
13) BODY EXTERNAL WELDED[74]()
Specification : BODY EXTERNAL WELDED (VIEW)064706A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
14) LEVER TRIGGER[74]()
Specification : LEVER TRIGGER (View) AS PER DRG NO.Y03740A-00 FOR STAND WEAPON ASSY OF SRCG
R
Nonestab
15) HEAD COCKING 1[74]()
Specification : HEAD COCKING 1(VIEW) AS PER DRG NO.066237A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) INLET ASSY[74]()
Specification : INLET ASSY (View) AS PER DRG.080780A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SPACER[74]()
Specification : SPACER (View) AS PER DRG NO.075389A-00 FOR COCKING MECH.ASSY OF SRCG
C
Nonestab
2) SPRING FLAT[74]()
Specification : SPRING FLAT AS PER DRG NO.Y28657A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
3) WRENCH[74]()
Specification : WRENCH (View) AS PER DRG NO.Y28656A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
4) SLIDER LINKS M9 WELDMENT[74]()
Specification : SLIDER LINKS M9 WELDMENT (View)AS PER DRG NO.Y17631A-00 STAND WEAPONASSY OF SRCG
C
Nonestab
5) WASHER LOCK TAB M4[74]()
Specification : WASHER LOCK TAB M4 AS PER DRG Y00963A-00 FOR STAND WEAPON ASSY OF SRCG
C
Nonestab
6) BLOCK STORAGE WELDED[74]()
Specification : BLOCK STORAGE WELDED (VIEW) AS PER DRG .Y17592A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]()
Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL
Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) HOUSING TRIGGER MECHANISM FOR MSL[70]()
Specification : HOUSING TRIGGER MECHANISM FOR MSL DRAWING NO. 33P 3014 WITH FIRM MATERIAL
C
Nonestab
2) SPACER BEARING[74]()
Specification : SPACER BEARING (View)074311A-00 FOR COCKING MECH. ASSY OF SRCG..
C
Nonestab
3) EXTENSION SOLENOID[74]()
Specification : EXTENSION SOLENOID/Y17398A-00 FOR SOLENOID SHOT ASSY OF SRCG..
C
Nonestab
4) BUSHING THREAD FRONT 1[74]()
Specification : BUSHING THREAD FRONT 1 (View)077851A-00 FOR CRADLE WEAPON ASSY OF
SRCG.
C
Nonestab
5) BUSHING REAR[74]()
Specification : BUSHING, REAR/Y18946A-00 FOR CRADLE WEAPON ASSY OF SRCG.
C
Nonestab
6) BUSHING FRONT 1[74]()
Specification : BUSHING FRONT 1 (View)077855A-00 FOR CRADLE WEAPON ASSY OF SRCG.
C
Nonestab
7) PIN KEY[74]()
Specification : PIN KEY (View)066425A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
8) SLEEVE LIMITER[74]()
Specification : SLEEVE LIMITER (View)066427A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
9) BASE BLOCK[74]()
Specification : BASE BLOCK/065286A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
10) PUSHER TRIGGER[74]()
Specification : PUSHER TRIGGER (View)Y05288A-01 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
11) BUSHING PIN[74]()
Specification : BUSHING PIN/065453A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
12) SCREW SPECIAL[74]()
Specification : SCREW SPECIAL/065603A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
13) AXIS 1[74]()
Specification : AXIS 1/065289A-00 FOR STAND WEAPON ASSY OF SRCG.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) CLAMP TO 6201080003[62]()
Specification : CLAMP TO DRG NO. 172.80.001CB-ACB
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material[70]()
Specification : Manufacture and supply of MGL Hammer Component to Drg No 30P 3061 st 2 with firm material
R
Nonestab
2) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE[00]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER DRG NO TEND 1745 star FOR 315 SPORTING RIFLE
C
Nonestab
3) MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF TRICA BOLT CARRIER BLANK AS PER DRAWING TEND 2692 STAR WITH FIRMS MATERIAL
C
Nonestab
4) C5087 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
5) HANDLE TO DRG NO C5073 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING AND SUPPLY OF HANDLE IN FULLY FINISHED CONDITION TO DRG No C1096 WITH FIRMS MATERIAL LATEST DC WILL BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
7) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
8) MACHINING MILLING AND GRINDING OF ANTI REBOUND C1048 TO DRG NO TEND 2174 STAR WITH FIRMS MATERIAL[70]()
Specification : As per TE
C
Nonestab
9) PAWL TO DRG NO C1039 1 WITH FIRMS MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30 MM CANNON[70]()
Specification : As per TE
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]()
Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 STAR WITH FIRMS MATERIAL FOR UBGL BULGARIA
C
Nonestab
2) COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL[70]()
Specification : COCKING ARM AS PER DRG NO 36P 4101 WITH FIRMS MATERIAL
C
Nonestab
3) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
4) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
5) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()
Specification : As per TE
R
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Receiver Body for 9X19 mm Machine Pistol[70]()
Specification : Receiver Body for 9X19 mm Machine Pistol as per Drawing
C
Nonestab
2) Barrel Mount for 9X19 mm Machine Pistol[70]()
Specification : Barrel Mount for 9X19 mm Machine Pistol as per drawing
R
Nonestab
3) Wheel Rear Sight for 9X19 mm Machine Pistol[70]()
Specification : Wheel Rear Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 016 00DA
C
Nonestab
4) Locking Rear Block for 9X19 mm Machine Pistol[70]()
Specification : Locking Rear Block for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 00 00 002 00DA
C
Nonestab
5) RECEIVER FOR LMG BELT FED[70]()
Specification : RECEIVER AS PER DRG.NO.1804 01 01 01 01 000 00DA FOR LMG 7.62 X 51MM BELT FED
C
Nonestab
6) Rear sight for 9X19 mm Machine Pistol[70]()
Specification : Rear sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 012 00DA
C
Nonestab
7) Housing Fore Sight for 9X19 mm Machine Pistol[70]()
Specification : Housing Fore Sight for 9X19 mm Machine Pistol as per drawing no. 2101 01 02 01 05 009 00DA
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Small Arms Factory
Name
Specification
Use
Status
1) Bracket Bipod drg no 1005 000061 for LMG 5 56mm[70]()
Specification : AS PER DRG.
C
Nonestab
2) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
C
Nonestab
3) BLOCK GAS IN FINISH CONDITION FOR MAG[70]()
Specification : BLOCK GAS IN FINISH CONDITION AS PER D.S.CAT NO;1005-006815 FOR MAG 7.62MM (BORE SIZE DIA 23.021 TO 23.037MM)
7) Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 003 00DA[70]()
Specification : Barrel Adapter Left for 9X19 mm Machine Pistol as per Drg. No. 2101 01 02 01 05 003 00DA
C
Nonestab
8) RECEIVER FOR GPMG WITHOUT HEATTREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) C1054 SLIDER FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
2) SUPPORT TO DRG NO C1062 WITH FIRM MATERIAL AND THE MANUFACTURING SHOULD BE THROUGH RAW MATERIAL ROUTE REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
3) C1091 BRACKET FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON[70]()
Specification : As per TE
C
Nonestab
4) C1097 CATCH FULLY FINISHED THROUGH RAW MATERIAL ROUTE WITH FIRMS MATERIAL REQD FOR 30MM CANNON GUN[70]()
Specification : As per TE
C
Nonestab
5) HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) manufaturing and supply of slide to DS CAT No 1005 001604 ICR1328 fully finishecondition with firms material required for 7 62mm SLR Rifle[70]()
Specification : manufaturing & supply of slide to DS CAT No 1005-001604(ICR1328) fully finished condition with firms material required for 7.62mm SLR Rifle
E
Nonestab
2) BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : BIPOD ASSY TO DRAWING NO 44P 07000 STAR 3 REQUIRED FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
3) HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR[70]()
Specification : HOUSING TO DRG NO 44P 01001STAR 2 WITH FIRMS MATERIAL REQD FOR 14 POINT 5 AND 20MM AMR
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun Carriage Factory
Name
Specification
Use
Status
1) 9073200282 MACHINING OF T 90 CRADLE TO DRG NO GCF 20A SK 885 SHT 1 TO 6 AS PER QAP SCOPE OF WORK[90]()
Specification : MACHINING OF T-90 CRADLE TO DRG.NO.GCF-20A-SK-885,SHT 1 TO 6 AS PER QAP & SCOPE OF WORK.
C
Nonestab
Category :
Grade : Grade III
Size :
M
1326
R V INDUSTRIALS
SF NO.:616/1E, CHETTIPALAYAM ROAD, EACHANARI POST, COIMBATORE, TAMIL NADU
PIN1 : 641021
Phone No. : 0422-2974641, 9842216641 GSTIN :
33AACFR3326A1ZX
1) CALIBRATIOPN OF BOW DYNAMO METER UTM[CAPACITY UP TO 100KN OF UTM]()
CAPACITY UP TO 100KN OF UTM
E
ESTAB
2) DENSITY CALIBRATION OF HA BLANKS[STANDARD BLANKOF DENSITY 18.10GM / CC]()
STANDARD BLANKOF DENSITY 18.10GM / CC
E
ESTAB
3) ULTROSONIC CALIBRATION OF HA BLANK[DENSITY 18.10GM /CC]()
DENSITY 18.10GM /CC
E
ESTABLISHED
Category : S
Grade : I
Size :
O
1Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL
Description : FABRICATION OF DRUM BARREL TO DRG NO 9 A 621 06 035 FROM GSF SUPPLIED MATERIAL()
Specification : FABRICATION OF DRUM/BARREL TO DRG NO 9-A-621.06.035 FROM GSF SUPPLIED MATERIAL
C
Estab
Category : ddp
Grade : 3
Size :
L
1328
DEVENDRA AUTOCOM PRIVATE LIMITED
Devendra Autocom Private Limited
#35, B/2, Second Main Road,
Ambattur Industrial Estate,
Chennai-600058 Second Main Road Chennai Tamil Nadu
PIN1 : 600058
Phone No. : 26258127 GSTIN :
33AAACD1193N1ZN
1) BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR[70]()
Specification : BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR
E
Nonestab
Category :
Grade : Grade III
Size :
S
1335
rialto engineering pvt ltd
144/7, 7th floor, Rayala techno park,
Old mahabalipuram road,
Chennai-41 Old mahabalipuram road Chennai Tamil Nadu
PIN1 : 600041
Phone No. : 9384841774 GSTIN :
33AABCR3365H2ZI
Specification : FORGING FOR GUIDE TO DRAWING NUMBER 172.55.013/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION
C
Nonestab
2) FORGING FOR CLAMP TRACK T 90 L F NO 6120100102[61]()
Specification : FORGING FOR "CLAMP" TO DRAWING NUMBER 172.55.025/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION
C
Nonestab
3) FORGING FOR SHOE TRACK T 90 L F NO 6120100101[61]()
Specification : FORGING FOR "SHOE" TO DRAWING NUMBER 219.35.126/F, (HVF)TECHNICAL REQUIREMENTS AS PER GOST 4543-71, GOST 8479-70,GOST 7505-80, GOST 10243-75, GOST 1778-70.PROCESS SHEETS- HOT FORGING, NORMALIZATION.
C
Nonestab
4) LUG HOUSING W O PHOS 250 KG L F NO 6240100114[62]()
Specification : LUG HOUSING TO DRG. No. ARDE 9501 - 01 DET 4 SHT. No. 1 (W/O PHOSPHATED) [DRG. ENCLOSED]
C
Nonestab
5) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]()
Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED]
C
Nonestab
6) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]()
Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS.
C
Nonestab
7) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]()
Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN.
C
Nonestab
8) BOLT M20 X 1 POINT 5 6G TRACK T 90 L F NO 6120100107[61]()
Specification : BOLT TO DRAWING NUMBER 172.55.026 (M20 x 1.5-6G){CQA(HV)}TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87 PROCESS SHEETS- HOT SETTING, HIGH TEMPERING, ISOTHERMAL HARDENING, CADMIUM COATING.
C
Nonestab
9) BOLT M27 X 1 PINT 5 6G TRACK T 90 L F NO 6120100108[61]()
Specification : BOLT TO DRAWING NUMBER 219-35-158 (M27 X 1.5-6G) {CQA(HV)} TECHNICAL REQUIREMENTS AS PER GOST 4543-71, OST 3 4704-80,GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 9454-78, 520 TY 1, GOST 1759.0-87, GOST 8479-70, GOST 7505-89
